From 6e45dafa0ef24de839d9e1919773a725453b0c15 Mon Sep 17 00:00:00 2001 From: dinau Date: Sat, 30 Jan 2016 13:53:00 +0900 Subject: [PATCH 1/2] Add uVision4 exporters for DISCO-{F051R8, F100RB, F303VC, F407VG} (1) Add above exporters. (2) Modified only comments in "cmsis_nvic.h" files. --- .../TOOLCHAIN_ARM_MICRO/startup_stm32f051x8.s | 242 ++++++++++ .../TOOLCHAIN_ARM_MICRO/stm32f0xx.sct | 45 ++ .../TOOLCHAIN_ARM_MICRO/sys.cpp | 56 +++ .../TOOLCHAIN_ARM_STD/startup_stm32f051x8.s | 217 +++++++++ .../TOOLCHAIN_ARM_STD/stm32f0xx.sct | 45 ++ .../TOOLCHAIN_ARM_STD/sys.cpp | 56 +++ .../TARGET_DISCO_F051R8/cmsis_nvic.h | 8 +- .../TOOLCHAIN_ARM_MICRO/startup_stm32f100xb.S | 310 +++++++++++++ .../TOOLCHAIN_ARM_MICRO/stm32f100xb.sct | 44 ++ .../TOOLCHAIN_ARM_MICRO/sys.cpp | 56 +++ .../TOOLCHAIN_ARM_STD/startup_stm32f100xb.S | 283 +++++++++++ .../TOOLCHAIN_ARM_STD/stm32f100xb.sct | 44 ++ .../TOOLCHAIN_ARM_STD/sys.cpp | 56 +++ .../TARGET_DISCO_F100RB/cmsis_nvic.h | 6 +- .../TOOLCHAIN_ARM_MICRO/startup_stm32f303xc.S | 388 ++++++++++++++++ .../TOOLCHAIN_ARM_MICRO/stm32f303xc.sct | 45 ++ .../TOOLCHAIN_ARM_MICRO/sys.cpp | 56 +++ .../TOOLCHAIN_ARM_STD/startup_stm32f303xc.S | 361 +++++++++++++++ .../TOOLCHAIN_ARM_STD/stm32f303xc.sct | 45 ++ .../TOOLCHAIN_ARM_STD/sys.cpp | 56 +++ .../TARGET_DISCO_F303VC/cmsis_nvic.h | 4 +- .../TOOLCHAIN_ARM_STD/startup_STM32F40x.S | 2 +- .../TARGET_STM32F407VG/cmsis_nvic.h | 5 - .../TOOLCHAIN_ARM_STD/startup_STM32F40x.S | 2 +- .../TARGET_STM/TARGET_STM32F4XX/cmsis_nvic.h | 2 +- workspace_tools/export/uvision4.py | 7 + .../export/uvision4_disco_f051r8.uvopt.tmpl | 208 +++++++++ .../export/uvision4_disco_f051r8.uvproj.tmpl | 438 ++++++++++++++++++ .../export/uvision4_disco_f100rb.uvopt.tmpl | 218 +++++++++ .../export/uvision4_disco_f100rb.uvproj.tmpl | 438 ++++++++++++++++++ .../export/uvision4_disco_f303vc.uvopt.tmpl | 208 +++++++++ .../export/uvision4_disco_f303vc.uvproj.tmpl | 438 ++++++++++++++++++ .../export/uvision4_disco_f407vg.uvopt.tmpl | 2 +- .../export/uvision4_disco_f407vg.uvproj.tmpl | 15 +- workspace_tools/export_test.py | 4 + workspace_tools/targets.py | 1 + 36 files changed, 4388 insertions(+), 23 deletions(-) create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/startup_stm32f051x8.s create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/stm32f0xx.sct create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/sys.cpp create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/startup_stm32f051x8.s create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/stm32f0xx.sct create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/sys.cpp create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/startup_stm32f100xb.S create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/stm32f100xb.sct create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/sys.cpp create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/startup_stm32f100xb.S create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/stm32f100xb.sct create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/sys.cpp create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/startup_stm32f303xc.S create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/stm32f303xc.sct create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/sys.cpp create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/startup_stm32f303xc.S create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/stm32f303xc.sct create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/sys.cpp create mode 100644 workspace_tools/export/uvision4_disco_f051r8.uvopt.tmpl create mode 100644 workspace_tools/export/uvision4_disco_f051r8.uvproj.tmpl create mode 100644 workspace_tools/export/uvision4_disco_f100rb.uvopt.tmpl create mode 100644 workspace_tools/export/uvision4_disco_f100rb.uvproj.tmpl create mode 100644 workspace_tools/export/uvision4_disco_f303vc.uvopt.tmpl create mode 100644 workspace_tools/export/uvision4_disco_f303vc.uvproj.tmpl diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/startup_stm32f051x8.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/startup_stm32f051x8.s new file mode 100644 index 00000000000..6630f3629b6 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/startup_stm32f051x8.s @@ -0,0 +1,242 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f051x8.s +;* Author : MCD Application Team +;* Version : V2.2.2 +;* Date : 26-June-2015 +;* Description : STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size +__initial_sp EQU 0x20002000 ; Top of RAM (8 KB for STM32F030R8) + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000400 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_IRQHandler ; CEC + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TSC_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +CEC_IRQHandler + + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/stm32f0xx.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/stm32f0xx.sct new file mode 100644 index 00000000000..6470bf465f0 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/stm32f0xx.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32F030R8: 64KB FLASH (0x10000) + 8KB RAM (0x2000) + + LR_IROM1 0x08000000 0x10000 { ; load region size_region + ER_IROM1 0x08000000 0x10000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 48 vectors = 192 bytes (0xC0) to be reserved in RAM + RW_IRAM1 (0x20000000+0xC0) (0x2000-0xC0) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/sys.cpp new file mode 100644 index 00000000000..bb665909b98 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_MICRO/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/startup_stm32f051x8.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/startup_stm32f051x8.s new file mode 100644 index 00000000000..71932f44e97 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/startup_stm32f051x8.s @@ -0,0 +1,217 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f051x8.s +;* Author : MCD Application Team +;* Version : V2.2.2 +;* Date : 26-June-2015 +;* Description : STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + + + +__initial_sp EQU 0x20002000 ; Top of RAM (8 KB for STM32F030R8) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_IRQHandler ; CEC + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TSC_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +CEC_IRQHandler + + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/stm32f0xx.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/stm32f0xx.sct new file mode 100644 index 00000000000..6470bf465f0 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/stm32f0xx.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32F030R8: 64KB FLASH (0x10000) + 8KB RAM (0x2000) + + LR_IROM1 0x08000000 0x10000 { ; load region size_region + ER_IROM1 0x08000000 0x10000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 48 vectors = 192 bytes (0xC0) to be reserved in RAM + RW_IRAM1 (0x20000000+0xC0) (0x2000-0xC0) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/sys.cpp new file mode 100644 index 00000000000..bb665909b98 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/TOOLCHAIN_ARM_STD/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/cmsis_nvic.h index 570550abfdb..019fc7d6f83 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/cmsis_nvic.h +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/cmsis_nvic.h @@ -32,11 +32,11 @@ #ifndef MBED_CMSIS_NVIC_H #define MBED_CMSIS_NVIC_H -// STM32F030R8 +// STM32F051R8 // CORE: 16 vectors = 64 bytes from 0x00 to 0x3F -// MCU Peripherals: 29 vectors = 116 bytes from 0x40 to 0xB3 -// Total: 45 vectors = 180 bytes (0xB4) to be reserved in RAM -#define NVIC_NUM_VECTORS 45 +// MCU Peripherals: 32 vectors = 128 bytes from 0x40 to 0xBF +// Total: 48 vectors = 192 bytes (0xC0) to be reserved in RAM +#define NVIC_NUM_VECTORS (16 + 32 ) #define NVIC_USER_IRQ_OFFSET 16 #include "cmsis.h" diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/startup_stm32f100xb.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/startup_stm32f100xb.S new file mode 100644 index 00000000000..668a153505e --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/startup_stm32f100xb.S @@ -0,0 +1,310 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f100xb.s +;* Author : MCD Application Team +;* Version : V4.0.1 +;* Date : 31-July-2015 +;* Description : STM32F100xB Devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* COPYRIGHT(c) 2015 STMicroelectronics +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size +__initial_sp EQU 0x20002000 ; Top of RAM + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000400 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +CEC_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/stm32f100xb.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/stm32f100xb.sct new file mode 100644 index 00000000000..cc6b0e9d984 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/stm32f100xb.sct @@ -0,0 +1,44 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +LR_IROM1 0x08000000 0x20000 { ; load region size_region (128K) + + ER_IROM1 0x08000000 0x20000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 77 vectors (16 core + 61 peripheral) * 4 bytes = 308 bytes to reserve (0x134) + RW_IRAM1 (0x20000000+0x134) (0x2000-0x134) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/sys.cpp new file mode 100644 index 00000000000..bb665909b98 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_MICRO/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/startup_stm32f100xb.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/startup_stm32f100xb.S new file mode 100644 index 00000000000..70c490681c8 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/startup_stm32f100xb.S @@ -0,0 +1,283 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f100xb.s +;* Author : MCD Application Team +;* Version : V4.0.1 +;* Date : 31-July-2015 +;* Description : STM32F100xB Devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* COPYRIGHT(c) 2015 STMicroelectronics +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +__initial_sp EQU 0x20002000 ; Top of RAM + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +CEC_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/stm32f100xb.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/stm32f100xb.sct new file mode 100644 index 00000000000..cc6b0e9d984 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/stm32f100xb.sct @@ -0,0 +1,44 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +LR_IROM1 0x08000000 0x20000 { ; load region size_region (128K) + + ER_IROM1 0x08000000 0x20000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 77 vectors (16 core + 61 peripheral) * 4 bytes = 308 bytes to reserve (0x134) + RW_IRAM1 (0x20000000+0x134) (0x2000-0x134) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/sys.cpp new file mode 100644 index 00000000000..bb665909b98 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/TOOLCHAIN_ARM_STD/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/cmsis_nvic.h index 1410b207e18..b8480ea4c2d 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/cmsis_nvic.h +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/cmsis_nvic.h @@ -33,9 +33,9 @@ #define MBED_CMSIS_NVIC_H // CORE: 16 vectors (= 64 bytes from 0x00 to 0x3F) -// MCU Peripherals: 100 vectors (= 400 bytes from 0x40 to 0x1CC) -// Total: 464 bytes to be reserved in RAM (see scatter file) -#define NVIC_NUM_VECTORS (16 + 100) +// MCU Peripherals: 61 vectors (= 244 bytes from 0x40 to 0x134) +// Total: 308 bytes to be reserved in RAM (see scatter file) +#define NVIC_NUM_VECTORS (16 + 61) #define NVIC_USER_IRQ_OFFSET 16 #include "cmsis.h" diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/startup_stm32f303xc.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/startup_stm32f303xc.S new file mode 100644 index 00000000000..8ae0cc24bca --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/startup_stm32f303xc.S @@ -0,0 +1,388 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f303xc.s +;* Author : MCD Application Team +;* Version : $VERSION$ +;* Date : 12-Sept-2014 +;* Description : STM32F303xB/xC devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size +__initial_sp EQU 0x2000A000 ; Top of RAM + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000400 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_TSC_IRQHandler ; EXTI Line2 and Touch Sense controller + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 and ADC2 + DCD USB_HP_CAN_TX_IRQHandler ; USB Device High Priority or CAN TX + DCD USB_LP_CAN_RX0_IRQHandler ; USB Device Low Priority or CAN RX0 + DCD CAN_RX1_IRQHandler ; CAN RX1 + DCD CAN_SCE_IRQHandler ; CAN SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line + DCD TIM8_BRK_IRQHandler ; TIM8 Break + DCD TIM8_UP_IRQHandler ; TIM8 Update + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD ADC4_IRQHandler ; ADC4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3 + DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6 + DCD COMP7_IRQHandler ; COMP7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD USB_HP_IRQHandler ; USB High Priority remap + DCD USB_LP_IRQHandler ; USB Low Priority remap + DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_TSC_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN_RX0_IRQHandler [WEAK] + EXPORT CAN_RX1_IRQHandler [WEAK] + EXPORT CAN_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT ADC4_IRQHandler [WEAK] + EXPORT COMP1_2_3_IRQHandler [WEAK] + EXPORT COMP4_5_6_IRQHandler [WEAK] + EXPORT COMP7_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT USBWakeUp_RMP_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_TSC_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN_TX_IRQHandler +USB_LP_CAN_RX0_IRQHandler +CAN_RX1_IRQHandler +CAN_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +ADC4_IRQHandler +COMP1_2_3_IRQHandler +COMP4_5_6_IRQHandler +COMP7_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +USBWakeUp_RMP_IRQHandler +FPU_IRQHandler + + B . + + ENDP + + ALIGN + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/stm32f303xc.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/stm32f303xc.sct new file mode 100644 index 00000000000..34ec3266f7c --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/stm32f303xc.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32F303VC: 256KB FLASH (0x40000) + 40KB SRAM (0xA000) +LR_IROM1 0x08000000 0x40000 { ; load region size_region + + ER_IROM1 0x08000000 0x40000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 98 vectors = 392 bytes (0x188) to be reserved in RAM + RW_IRAM1 (0x20000000+0x188) (0xA000-0x188) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/sys.cpp new file mode 100644 index 00000000000..bb665909b98 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_MICRO/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/startup_stm32f303xc.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/startup_stm32f303xc.S new file mode 100644 index 00000000000..6fa665e3e05 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/startup_stm32f303xc.S @@ -0,0 +1,361 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f303xc.s +;* Author : MCD Application Team +;* Version : $VERSION$ +;* Date : 12-Sept-2014 +;* Description : STM32F303xB/xC devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +__initial_sp EQU 0x2000A000 ; Top of RAM + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_TSC_IRQHandler ; EXTI Line2 and Touch Sense controller + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 and ADC2 + DCD USB_HP_CAN_TX_IRQHandler ; USB Device High Priority or CAN TX + DCD USB_LP_CAN_RX0_IRQHandler ; USB Device Low Priority or CAN RX0 + DCD CAN_RX1_IRQHandler ; CAN RX1 + DCD CAN_SCE_IRQHandler ; CAN SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line + DCD TIM8_BRK_IRQHandler ; TIM8 Break + DCD TIM8_UP_IRQHandler ; TIM8 Update + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD ADC4_IRQHandler ; ADC4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3 + DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6 + DCD COMP7_IRQHandler ; COMP7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD USB_HP_IRQHandler ; USB High Priority remap + DCD USB_LP_IRQHandler ; USB Low Priority remap + DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_TSC_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN_RX0_IRQHandler [WEAK] + EXPORT CAN_RX1_IRQHandler [WEAK] + EXPORT CAN_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT ADC4_IRQHandler [WEAK] + EXPORT COMP1_2_3_IRQHandler [WEAK] + EXPORT COMP4_5_6_IRQHandler [WEAK] + EXPORT COMP7_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT USBWakeUp_RMP_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_TSC_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN_TX_IRQHandler +USB_LP_CAN_RX0_IRQHandler +CAN_RX1_IRQHandler +CAN_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +ADC4_IRQHandler +COMP1_2_3_IRQHandler +COMP4_5_6_IRQHandler +COMP7_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +USBWakeUp_RMP_IRQHandler +FPU_IRQHandler + + B . + + ENDP + + ALIGN + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/stm32f303xc.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/stm32f303xc.sct new file mode 100644 index 00000000000..34ec3266f7c --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/stm32f303xc.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32F303VC: 256KB FLASH (0x40000) + 40KB SRAM (0xA000) +LR_IROM1 0x08000000 0x40000 { ; load region size_region + + ER_IROM1 0x08000000 0x40000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 98 vectors = 392 bytes (0x188) to be reserved in RAM + RW_IRAM1 (0x20000000+0x188) (0xA000-0x188) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/sys.cpp new file mode 100644 index 00000000000..bb665909b98 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_ARM_STD/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/cmsis_nvic.h index 55adc44395b..3a6218bd70a 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/cmsis_nvic.h +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/cmsis_nvic.h @@ -32,10 +32,10 @@ #ifndef MBED_CMSIS_NVIC_H #define MBED_CMSIS_NVIC_H -// STM32F302R8 +// STM32F303VC // CORE: 16 vectors (= 64 bytes from 0x00 to 0x3F) // MCU Peripherals: 82 vectors (= 328 bytes from 0x40 to ...) -// Total: 392 bytes to be reserved in RAM (see scatter file) +// Total: 392(0x188) bytes to be reserved in RAM (see scatter file) #define NVIC_NUM_VECTORS (16 + 82) #define NVIC_USER_IRQ_OFFSET 16 diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_ARM_STD/startup_STM32F40x.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_ARM_STD/startup_STM32F40x.S index 60ac114a64e..3a5d312e4b6 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_ARM_STD/startup_STM32F40x.S +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_ARM_STD/startup_STM32F40x.S @@ -21,7 +21,7 @@ -__initial_sp EQU 0x20020000 ; Top of RAM from LPC4088 +__initial_sp EQU 0x20020000 ; Top of RAM PRESERVE8 THUMB diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/cmsis_nvic.h index 713565e087d..013c08f29d0 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/cmsis_nvic.h +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/cmsis_nvic.h @@ -32,11 +32,6 @@ #ifndef MBED_CMSIS_NVIC_H #define MBED_CMSIS_NVIC_H -// STM32F401RE -// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F -// MCU Peripherals: 85 vectors = 340 bytes from 0x40 to ... -// Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM - // STM32F407VG // CORE: 16 vectors = 64 bytes from 0x00 to 0x3F // MCU Peripherals: 82 vectors = 328 bytes from 0x40 to ... diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/TOOLCHAIN_ARM_STD/startup_STM32F40x.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/TOOLCHAIN_ARM_STD/startup_STM32F40x.S index 60ac114a64e..3a5d312e4b6 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/TOOLCHAIN_ARM_STD/startup_STM32F40x.S +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/TOOLCHAIN_ARM_STD/startup_STM32F40x.S @@ -21,7 +21,7 @@ -__initial_sp EQU 0x20020000 ; Top of RAM from LPC4088 +__initial_sp EQU 0x20020000 ; Top of RAM PRESERVE8 THUMB diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/cmsis_nvic.h index c259328d4ed..88d629ff551 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/cmsis_nvic.h +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/cmsis_nvic.h @@ -7,7 +7,7 @@ #ifndef MBED_CMSIS_NVIC_H #define MBED_CMSIS_NVIC_H -#define NVIC_NUM_VECTORS (16 + 81) // CORE + MCU Peripherals +#define NVIC_NUM_VECTORS (16 + 82) // CORE + MCU Peripherals #define NVIC_USER_IRQ_OFFSET 16 #include "cmsis.h" diff --git a/workspace_tools/export/uvision4.py b/workspace_tools/export/uvision4.py index 241e5068b7f..e8bbf9c4dfa 100644 --- a/workspace_tools/export/uvision4.py +++ b/workspace_tools/export/uvision4.py @@ -72,6 +72,9 @@ class Uvision4(Exporter): 'RBLAB_NRF51822', 'ARCH_PRO', 'ARCH_BLE', + 'DISCO_F051R8', + 'DISCO_F100RB', + 'DISCO_F303VC', 'DISCO_F407VG', 'DISCO_F429ZI', 'DISCO_F469NI', @@ -123,12 +126,16 @@ class Uvision4(Exporter): 'NUCLEO_L073RZ', 'NUCLEO_L152RE', 'NUCLEO_L476RG', + 'DISCO_F051R8', + 'DISCO_F100RB', 'DISCO_F334C8', 'DISCO_F429ZI', 'DISCO_F469NI', 'DISCO_L053C8', 'DISCO_L476VG', 'B96B_F446VE', + 'DISCO_F407VG', + 'DISCO_F303VC', 'LPC1549', 'LPC11U68', 'LPC11U35_501', diff --git a/workspace_tools/export/uvision4_disco_f051r8.uvopt.tmpl b/workspace_tools/export/uvision4_disco_f051r8.uvopt.tmpl new file mode 100644 index 00000000000..35e8f55a620 --- /dev/null +++ b/workspace_tools/export/uvision4_disco_f051r8.uvopt.tmpl @@ -0,0 +1,208 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + mbed DISCO_F051R8 + 0x4 + ARM-ADS + + 8000000 + + 1 + 1 + 0 + 1 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 0 + + SARMCM3.DLL + -MPU + DARMCM1.DLL + -pCM0+ + SARMCM3.DLL + -MPU + TARMCM1.DLL + -pCM0+ + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + 13 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + DLGTARM + (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0) + + + 0 + ARMDBGFLAGS + + + + 0 + DLGUARM + (105=-1,-1,-1,-1,0) + + + 0 + ULP2CM3 + -O207 -S8 -C0 -FO7 -F2000 -FN1 -FD20000000 -FF0STM32L0xx_64 -FL020000 -FS08000000 + + + 0 + ST-LINKIII-KEIL_SWO + -U-O207 -O207 -S8 -C0 -N00("ARM CoreSight SW-DP") -D00(0BC11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32L0x_64 -FS08000000 -FL010000 + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + src + 1 + 0 + 0 + 0 + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + main.cpp + main.cpp + 0 + 0 + + + + diff --git a/workspace_tools/export/uvision4_disco_f051r8.uvproj.tmpl b/workspace_tools/export/uvision4_disco_f051r8.uvproj.tmpl new file mode 100644 index 00000000000..a100238f684 --- /dev/null +++ b/workspace_tools/export/uvision4_disco_f051r8.uvproj.tmpl @@ -0,0 +1,438 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + mbed DISCO_F051R8 + 0x4 + ARM-ADS + + + STM32F051R8 + STMicroelectronics + IRAM(0x20000000-0x20002000) IROM(0x8000000-0x8010000) CLOCK(8000000) CPUTYPE("Cortex-M0+") + + + ULP2CM3(-O207 -S8 -C0 -FO7 -FD20000000 -F2000 -FN1 -FF0STM32L0xx_64 -FS08000000 -FL020000) + 0 + + + + + + + + + + + + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + {{name}} + 1 + 0 + 0 + 1 + 1 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin -o build\{{name}}_DISCO_F051R8.bin build\{{name}}.axf + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -MPU + DARMCM1.DLL + -pCM0+ + SARMCM3.DLL + -MPU + TARMCM1.DLL + -pCM0+ + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + 0 + 13 + + + + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4100 + + 1 + BIN\ULP2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0+" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x2000 + + + 1 + 0x8000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x10000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x2000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + + {% for flag in flags %}{{flag}} {% endfor %} + {% for s in symbols %} {{s}}, {% endfor %} + + {% for path in include_paths %} {{path}}; {% endfor %} + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + {{scatter_file}} + + + + {% for file in object_files %} + {{file}} + {% endfor %} + + + + + + + + {% for group,files in source_files %} + + {{group}} + + {% for file in files %} + + {{file.name}} + {{file.type}} + {{file.path}} + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + + + {% endfor %} + + + {% endfor %} + + + + + diff --git a/workspace_tools/export/uvision4_disco_f100rb.uvopt.tmpl b/workspace_tools/export/uvision4_disco_f100rb.uvopt.tmpl new file mode 100644 index 00000000000..2fcd2e7cd45 --- /dev/null +++ b/workspace_tools/export/uvision4_disco_f100rb.uvopt.tmpl @@ -0,0 +1,218 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + mbed DISCO_F100RB + 0x4 + ARM-ADS + + 24000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F100RB + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F100RB + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 13 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + DLGTARM + (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0) + + + 0 + ARMDBGFLAGS + + + + 0 + DLGUARM + (105=-1,-1,-1,-1,0) + + + 0 + ST-LINKIII-KEIL_SWO + -U-O206 -O206 -S3 -C0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 + + + 0 + UL2CM3 + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FN1 -FC800 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 + + + 0 + ULP2CM3 + -O2510 -S0 -C0 -FO15 -FN1 -FC800 -FD20000000 -FF0MK_P128_48MHZ -FL020000 -FS00 + + + 0 + CMSIS_AGDI + -X"MBED CMSIS-DAP" -UA000000001 -O462 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(0BC11477) -L00(0) -FO15 -FD20000000 -FC800 -FN1 -FF0MK_P128_48MHZ -FS00 -FL020000 + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + src + 1 + 0 + 0 + 0 + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + main.cpp + main.cpp + 0 + 0 + + + + diff --git a/workspace_tools/export/uvision4_disco_f100rb.uvproj.tmpl b/workspace_tools/export/uvision4_disco_f100rb.uvproj.tmpl new file mode 100644 index 00000000000..bc1310e2402 --- /dev/null +++ b/workspace_tools/export/uvision4_disco_f100rb.uvproj.tmpl @@ -0,0 +1,438 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + mbed DISCO_F100RB + 0x4 + ARM-ADS + + + STM32F100RB + STMicroelectronics + IRAM(0x20000000-0x20002000) IROM(0x8000000-0x8020000) CLOCK(24000000) CPUTYPE("Cortex-M3") + + "STARTUP\ST\STM32F10x\startup_stm32f10x_md.s" ("STM32 Medium Density Line Startup Code") + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) + 4231 + stm32f10x.h + + + + + + + + + + SFD\ST\STM32F1xx\STM32F100xx.sfr + 0 + 0 + + + + ST\STM32F10x\ + ST\STM32F10x\ + + 0 + 0 + 0 + 0 + 1 + + .\build\ + {{name}} + 1 + 0 + 0 + 1 + 1 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin -o build\{{name}}_DISCO_F100RB.bin build\{{name}}.axf + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F100RB + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F100RB + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + + 0 + 13 + + + + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4103 + + 1 + STLink\ST-LINKIII-KEIL_SWO.dll + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 1 + 0x8000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x20000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + {% for flag in flags %}{{flag}} {% endfor %} + {% for s in symbols %} {{s}}, {% endfor %} + + {% for path in include_paths %} {{path}}; {% endfor %} + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x10000000 + {{scatter_file}} + + + + {% for file in object_files %} + {{file}} + {% endfor %} + + + + + + + + {% for group,files in source_files %} + + {{group}} + + {% for file in files %} + + {{file.name}} + {{file.type}} + {{file.path}} + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + + + {% endfor %} + + + {% endfor %} + + + + + diff --git a/workspace_tools/export/uvision4_disco_f303vc.uvopt.tmpl b/workspace_tools/export/uvision4_disco_f303vc.uvopt.tmpl new file mode 100644 index 00000000000..eb86f7710d5 --- /dev/null +++ b/workspace_tools/export/uvision4_disco_f303vc.uvopt.tmpl @@ -0,0 +1,208 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + mbed DISCO_F303VC + 0x4 + ARM-ADS + + 72000000 + + 1 + 1 + 0 + 1 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 13 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + DLGTARM + (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0) + + + 0 + ARMDBGFLAGS + + + + 0 + DLGUARM + (105=-1,-1,-1,-1,0) + + + 0 + ST-LINKIII-KEIL_SWO + -U-O206 -O206 -S3 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F3xx_256 -FS08000000 -FL040000 + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F3xx_256 -FL040000 -FS08000000 -FP0($$Device:STM32F302RC$Flash\STM32F3xx_256.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + src + 1 + 0 + 0 + 0 + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + main.cpp + main.cpp + 0 + 0 + + + + diff --git a/workspace_tools/export/uvision4_disco_f303vc.uvproj.tmpl b/workspace_tools/export/uvision4_disco_f303vc.uvproj.tmpl new file mode 100644 index 00000000000..540f484146f --- /dev/null +++ b/workspace_tools/export/uvision4_disco_f303vc.uvproj.tmpl @@ -0,0 +1,438 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + mbed DISCO_F303VC + 0x4 + ARM-ADS + + + STM32F303VC + STMicroelectronics + IROM(0x08000000,0x20000) IRAM(0x20000000,0xC000) CPUTYPE("Cortex-M4") FPU2 CLOCK(72000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F3xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32F302RC$Flash\STM32F3xx_256.FLM)) + 6576 + $$Device:STM32F302RC$Device\Include\STM32F30x.h + + + + + + + + + + $$Device:STM32F302RC$SVD\STM32F30x.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + {{name}} + 1 + 0 + 0 + 1 + 1 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin -o build\{{name}}_DISCO_F303VC.bin build\{{name}}.axf + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + + 0 + 13 + + + + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4103 + + 1 + STLink\ST-LINKIII-KEIL_SWO.dll + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x8000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x8000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + {% for flag in flags %}{{flag}} {% endfor %} + {% for s in symbols %} {{s}}, {% endfor %} + + {% for path in include_paths %} {{path}}; {% endfor %} + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + {{scatter_file}} + + + + {% for file in object_files %} + {{file}} + {% endfor %} + + + + + + + + {% for group,files in source_files %} + + {{group}} + + {% for file in files %} + + {{file.name}} + {{file.type}} + {{file.path}} + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + + + {% endfor %} + + + {% endfor %} + + + + + diff --git a/workspace_tools/export/uvision4_disco_f407vg.uvopt.tmpl b/workspace_tools/export/uvision4_disco_f407vg.uvopt.tmpl index fc8c58653f8..a06e97f05ef 100755 --- a/workspace_tools/export/uvision4_disco_f407vg.uvopt.tmpl +++ b/workspace_tools/export/uvision4_disco_f407vg.uvopt.tmpl @@ -25,7 +25,7 @@ 0x4 ARM-ADS - 25000000 + 168000000 1 1 diff --git a/workspace_tools/export/uvision4_disco_f407vg.uvproj.tmpl b/workspace_tools/export/uvision4_disco_f407vg.uvproj.tmpl index 9c08d581898..74465724c10 100755 --- a/workspace_tools/export/uvision4_disco_f407vg.uvproj.tmpl +++ b/workspace_tools/export/uvision4_disco_f407vg.uvproj.tmpl @@ -14,7 +14,7 @@ STM32F407VG STMicroelectronics - IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 + IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(168000000) CPUTYPE("Cortex-M4") FPU2 "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) @@ -153,7 +153,7 @@ - BIN\CMSIS_AGDI.dll + STLink\ST-LINKIII-KEIL_SWO.dll @@ -163,11 +163,16 @@ 0 1 1 - 4105 + 4103 - BIN\CMSIS_AGDI.dll + 1 + STLink\ST-LINKIII-KEIL_SWO.dll "" () + + + + 0 @@ -334,7 +339,7 @@ 1 - 1 + 3 0 0 0 diff --git a/workspace_tools/export_test.py b/workspace_tools/export_test.py index 295c8952936..f6a4058ed76 100644 --- a/workspace_tools/export_test.py +++ b/workspace_tools/export_test.py @@ -147,8 +147,12 @@ def test_export(toolchain, target, expected_error=None): ('uvision', 'MTS_MDOT_F405RG'), ('uvision', 'MAXWSNENV'), ('uvision', 'MAX32600MBED'), + ('uvision', 'DISCO_F051R8'), + ('uvision', 'DISCO_F103RB'), + ('uvision', 'DISCO_F303VC'), ('uvision', 'DISCO_L053C8'), ('uvision', 'DISCO_F334C8'), + ('uvision', 'DISCO_F407VG'), ('uvision', 'DISCO_F429ZI'), ('uvision', 'DISCO_F746NG'), ('uvision', 'DISCO_F469NI'), diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py index 1416de03204..3700e750b5b 100755 --- a/workspace_tools/targets.py +++ b/workspace_tools/targets.py @@ -873,6 +873,7 @@ def __init__(self): self.extra_labels = ['STM', 'STM32F4', 'STM32F407', 'STM32F407VG'] self.supported_toolchains = ["ARM", "uARM", "GCC_ARM"] self.progen_target ='disco-f407vg' + self.default_toolchain = "uARM" class DISCO_F429ZI(Target): def __init__(self): From 1b8f2c7c3f818d52276f16c83cac0fb177c7e449 Mon Sep 17 00:00:00 2001 From: dinau Date: Thu, 11 Feb 2016 13:59:26 +0900 Subject: [PATCH 2/2] [DISCO-F407VG]:Changed: Default toolchain from uARM to ARM. --- workspace_tools/targets.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py index 3700e750b5b..ddb92f39e88 100755 --- a/workspace_tools/targets.py +++ b/workspace_tools/targets.py @@ -873,7 +873,7 @@ def __init__(self): self.extra_labels = ['STM', 'STM32F4', 'STM32F407', 'STM32F407VG'] self.supported_toolchains = ["ARM", "uARM", "GCC_ARM"] self.progen_target ='disco-f407vg' - self.default_toolchain = "uARM" + self.default_toolchain = "ARM" class DISCO_F429ZI(Target): def __init__(self):