diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/startup_stm32f746zg.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/startup_stm32f746zg.S
new file mode 100644
index 00000000000..71ee787e89f
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/startup_stm32f746zg.S
@@ -0,0 +1,463 @@
+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name : startup_stm32f746xx.s
+;* Author : MCD Application Team
+;* Version : V1.0.0
+;* Date : 28-April-2015
+;* Description : STM32F746xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM7 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+ EXPORT __initial_sp
+
+Stack_Mem SPACE Stack_Size
+__initial_sp EQU 0x20050000 ; Top of RAM
+
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x00000400
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit EQU (__initial_sp - Stack_Size)
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
+ DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
+ DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD FMC_IRQHandler ; FMC
+ DCD SDMMC1_IRQHandler ; SDMMC1
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD ETH_IRQHandler ; Ethernet
+ DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
+ DCD CAN2_TX_IRQHandler ; CAN2 TX
+ DCD CAN2_RX0_IRQHandler ; CAN2 RX0
+ DCD CAN2_RX1_IRQHandler ; CAN2 RX1
+ DCD CAN2_SCE_IRQHandler ; CAN2 SCE
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
+ DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
+ DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
+ DCD OTG_HS_IRQHandler ; USB OTG HS
+ DCD DCMI_IRQHandler ; DCMI
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; Hash and Rng
+ DCD FPU_IRQHandler ; FPU
+ DCD UART7_IRQHandler ; UART7
+ DCD UART8_IRQHandler ; UART8
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+ DCD SPI6_IRQHandler ; SPI6
+ DCD SAI1_IRQHandler ; SAI1
+ DCD LTDC_IRQHandler ; LTDC
+ DCD LTDC_ER_IRQHandler ; LTDC error
+ DCD DMA2D_IRQHandler ; DMA2D
+ DCD SAI2_IRQHandler ; SAI2
+ DCD QUADSPI_IRQHandler ; QUADSPI
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD CEC_IRQHandler ; HDMI_CEC
+ DCD I2C4_EV_IRQHandler ; I2C4 Event
+ DCD I2C4_ER_IRQHandler ; I2C4 Error
+ DCD SPDIF_RX_IRQHandler ; SPDIF_RX
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
+ EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
+ EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+ EXPORT TIM8_CC_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT FMC_IRQHandler [WEAK]
+ EXPORT SDMMC1_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT ETH_IRQHandler [WEAK]
+ EXPORT ETH_WKUP_IRQHandler [WEAK]
+ EXPORT CAN2_TX_IRQHandler [WEAK]
+ EXPORT CAN2_RX0_IRQHandler [WEAK]
+ EXPORT CAN2_RX1_IRQHandler [WEAK]
+ EXPORT CAN2_SCE_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
+ EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
+ EXPORT OTG_HS_IRQHandler [WEAK]
+ EXPORT DCMI_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT UART7_IRQHandler [WEAK]
+ EXPORT UART8_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+ EXPORT SPI6_IRQHandler [WEAK]
+ EXPORT SAI1_IRQHandler [WEAK]
+ EXPORT LTDC_IRQHandler [WEAK]
+ EXPORT LTDC_ER_IRQHandler [WEAK]
+ EXPORT DMA2D_IRQHandler [WEAK]
+ EXPORT SAI2_IRQHandler [WEAK]
+ EXPORT QUADSPI_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT I2C4_EV_IRQHandler [WEAK]
+ EXPORT I2C4_ER_IRQHandler [WEAK]
+ EXPORT SPDIF_RX_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+DMA1_Stream7_IRQHandler
+FMC_IRQHandler
+SDMMC1_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+OTG_HS_EP1_OUT_IRQHandler
+OTG_HS_EP1_IN_IRQHandler
+OTG_HS_WKUP_IRQHandler
+OTG_HS_IRQHandler
+DCMI_IRQHandler
+RNG_IRQHandler
+FPU_IRQHandler
+UART7_IRQHandler
+UART8_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+SPI6_IRQHandler
+SAI1_IRQHandler
+LTDC_IRQHandler
+LTDC_ER_IRQHandler
+DMA2D_IRQHandler
+SAI2_IRQHandler
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/stm32f746zg.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/stm32f746zg.sct
new file mode 100644
index 00000000000..b87630da88b
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/stm32f746zg.sct
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F746ZG: 1024 KB FLASH (0x100000) + 320 KB SRAM (0x50000)
+LR_IROM1 0x08000000 0x100000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x100000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x1C8) (0x50000-0x1C8) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/sys.cpp
new file mode 100644
index 00000000000..bb665909b98
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/startup_stm32f746zg.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/startup_stm32f746zg.S
new file mode 100644
index 00000000000..92857c9fda0
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/startup_stm32f746zg.S
@@ -0,0 +1,436 @@
+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name : startup_stm32f746xx.s
+;* Author : MCD Application Team
+;* Version : V1.0.0
+;* Date : 28-April-2015
+;* Description : STM32F746xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM7 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+__initial_sp EQU 0x20050000 ; Top of RAM
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
+ DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
+ DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD FMC_IRQHandler ; FMC
+ DCD SDMMC1_IRQHandler ; SDMMC1
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD ETH_IRQHandler ; Ethernet
+ DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
+ DCD CAN2_TX_IRQHandler ; CAN2 TX
+ DCD CAN2_RX0_IRQHandler ; CAN2 RX0
+ DCD CAN2_RX1_IRQHandler ; CAN2 RX1
+ DCD CAN2_SCE_IRQHandler ; CAN2 SCE
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
+ DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
+ DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
+ DCD OTG_HS_IRQHandler ; USB OTG HS
+ DCD DCMI_IRQHandler ; DCMI
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; Hash and Rng
+ DCD FPU_IRQHandler ; FPU
+ DCD UART7_IRQHandler ; UART7
+ DCD UART8_IRQHandler ; UART8
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+ DCD SPI6_IRQHandler ; SPI6
+ DCD SAI1_IRQHandler ; SAI1
+ DCD LTDC_IRQHandler ; LTDC
+ DCD LTDC_ER_IRQHandler ; LTDC error
+ DCD DMA2D_IRQHandler ; DMA2D
+ DCD SAI2_IRQHandler ; SAI2
+ DCD QUADSPI_IRQHandler ; QUADSPI
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD CEC_IRQHandler ; HDMI_CEC
+ DCD I2C4_EV_IRQHandler ; I2C4 Event
+ DCD I2C4_ER_IRQHandler ; I2C4 Error
+ DCD SPDIF_RX_IRQHandler ; SPDIF_RX
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
+ EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
+ EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+ EXPORT TIM8_CC_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT FMC_IRQHandler [WEAK]
+ EXPORT SDMMC1_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT ETH_IRQHandler [WEAK]
+ EXPORT ETH_WKUP_IRQHandler [WEAK]
+ EXPORT CAN2_TX_IRQHandler [WEAK]
+ EXPORT CAN2_RX0_IRQHandler [WEAK]
+ EXPORT CAN2_RX1_IRQHandler [WEAK]
+ EXPORT CAN2_SCE_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
+ EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
+ EXPORT OTG_HS_IRQHandler [WEAK]
+ EXPORT DCMI_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT UART7_IRQHandler [WEAK]
+ EXPORT UART8_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+ EXPORT SPI6_IRQHandler [WEAK]
+ EXPORT SAI1_IRQHandler [WEAK]
+ EXPORT LTDC_IRQHandler [WEAK]
+ EXPORT LTDC_ER_IRQHandler [WEAK]
+ EXPORT DMA2D_IRQHandler [WEAK]
+ EXPORT SAI2_IRQHandler [WEAK]
+ EXPORT QUADSPI_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT I2C4_EV_IRQHandler [WEAK]
+ EXPORT I2C4_ER_IRQHandler [WEAK]
+ EXPORT SPDIF_RX_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+DMA1_Stream7_IRQHandler
+FMC_IRQHandler
+SDMMC1_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+OTG_HS_EP1_OUT_IRQHandler
+OTG_HS_EP1_IN_IRQHandler
+OTG_HS_WKUP_IRQHandler
+OTG_HS_IRQHandler
+DCMI_IRQHandler
+RNG_IRQHandler
+FPU_IRQHandler
+UART7_IRQHandler
+UART8_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+SPI6_IRQHandler
+SAI1_IRQHandler
+LTDC_IRQHandler
+LTDC_ER_IRQHandler
+DMA2D_IRQHandler
+SAI2_IRQHandler
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/stm32f746zg.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/stm32f746zg.sct
new file mode 100644
index 00000000000..b87630da88b
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/stm32f746zg.sct
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F746ZG: 1024 KB FLASH (0x100000) + 320 KB SRAM (0x50000)
+LR_IROM1 0x08000000 0x100000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x100000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x1C8) (0x50000-0x1C8) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/sys.cpp
new file mode 100644
index 00000000000..bb665909b98
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/STM32F746ZG.ld b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/STM32F746ZG.ld
new file mode 100644
index 00000000000..198ac5c584a
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/STM32F746ZG.ld
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
+ RAM (rwx) : ORIGIN = 0x200001C8, LENGTH = 320K - 0x1C8
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/startup_stm32f746xx.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/startup_stm32f746xx.S
new file mode 100644
index 00000000000..1fcde5f2bd0
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/startup_stm32f746xx.S
@@ -0,0 +1,596 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f746xx.s
+ * @author MCD Application Team
+ * Version V1.0.0
+ * Date 28-April-2015
+ * @brief STM32F746xx Devices vector table for GCC based toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M7 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h
new file mode 100644
index 00000000000..0a26d73682f
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 98 vectors = 392 bytes from 0x40 to 0x1C7
+// Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+#define NVIC_NUM_VECTORS 114
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c
new file mode 100644
index 00000000000..e21ca156ae0
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c
@@ -0,0 +1,140 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2016 STMicroelectronics © COPYRIGHT(c) 2016 STMicroelectronics © COPYRIGHT(c) 2015 STMicroelectronics
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief DMA2D Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */
+ __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */
+ __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */
+ __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */
+ __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */
+ __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */
+ __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */
+ __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */
+ __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */
+ __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */
+ __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */
+ __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */
+ __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */
+ __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */
+ __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */
+ __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */
+ __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */
+ __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */
+ __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */
+ __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */
+ uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */
+ __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */
+ __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */
+} DMA2D_TypeDef;
+
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1[2];
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ __IO uint32_t RESERVED8;
+ __IO uint32_t PTPTSSR;
+ uint32_t RESERVED9[565];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ __IO uint32_t DMARSWTR;
+ uint32_t RESERVED10[8];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */
+} FLASH_TypeDef;
+
+
+
+/**
+ * @brief Flexible Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank3
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */
+ __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */
+ __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */
+ __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */
+ uint32_t RESERVED0; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */
+} FMC_Bank3_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank5_6
+ */
+
+typedef struct
+{
+ __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */
+ __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */
+ __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */
+ __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */
+ __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */
+} FMC_Bank5_6_TypeDef;
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+} IWDG_TypeDef;
+
+
+/**
+ * @brief LCD-TFT Display Controller
+ */
+
+typedef struct
+{
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */
+ __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */
+ __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */
+ __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */
+ __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */
+ __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */
+ __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */
+ uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */
+ __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */
+ uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */
+ __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */
+ __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */
+ __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */
+ __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */
+ __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */
+ __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */
+} LTDC_TypeDef;
+
+/**
+ * @brief LCD-TFT Display layer x Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */
+ __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */
+ __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */
+ __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */
+ __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */
+ __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */
+ __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */
+ __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */
+ uint32_t RESERVED0[2]; /*!< Reserved */
+ __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */
+ __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */
+ __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */
+ uint32_t RESERVED1[3]; /*!< Reserved */
+ __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */
+
+} LTDC_Layer_TypeDef;
+
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */
+ __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */
+ __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */
+} PWR_TypeDef;
+
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */
+ __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */
+ __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t reserved; /*!< Reserved */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */
+ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */
+ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */
+ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */
+ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */
+ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */
+ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */
+ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */
+ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */
+ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */
+ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */
+ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */
+} RTC_TypeDef;
+
+
+/**
+ * @brief Serial Audio Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */
+ __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */
+ __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */
+ __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */
+ __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */
+ __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+/**
+ * @brief SPDIF-RX Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */
+ __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */
+ __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */
+ __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */
+ __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */
+} SPDIFRX_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */
+} SDMMC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief QUAD Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */
+ __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */
+ __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */
+ __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */
+ __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */
+ __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */
+ __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */
+ __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */
+ __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */
+ __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */
+ __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */
+} QUADSPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+ __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */
+ __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */
+ __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */
+
+} TIM_TypeDef;
+
+/**
+ * @brief LPTIMIMER
+ */
+typedef struct
+{
+ __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */
+ __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */
+ __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */
+ __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */
+ __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */
+ __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */
+ __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */
+} LPTIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+} USART_TypeDef;
+
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @brief USB_OTG_Core_Registers
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */
+ __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */
+ uint32_t Reserved30[2]; /*!< Reserved 030h */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */
+ __IO uint32_t CID; /*!< User ID Register 03Ch */
+ uint32_t Reserved5[3]; /*!< Reserved 040h-048h */
+ __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */
+ uint32_t Reserved6; /*!< Reserved 050h */
+ __IO uint32_t GLPMCFG; /*!< LPM Register 054h */
+ __IO uint32_t GPWRDN; /*!< Power Down Register 058h */
+ __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */
+ __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */
+ uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+} USB_OTG_GlobalTypeDef;
+
+
+/**
+ * @brief USB_OTG_device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register 800h */
+ __IO uint32_t DCTL; /*!< dev Control Register 804h */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */
+ uint32_t Reserved0C; /*!< Reserved 80Ch */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */
+ uint32_t Reserved20; /*!< Reserved 820h */
+ uint32_t Reserved9; /*!< Reserved 824h */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */
+ __IO uint32_t DTHRCTL; /*!< dev threshold 830h */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */
+ uint32_t Reserved40; /*!< dedicated EP mask 840h */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */
+ uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */
+} USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief USB_OTG_IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+} USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief USB_OTG_OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */
+ __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */
+ __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */
+ uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */
+} USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief USB_OTG_Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /*!< Host Configuration Register 400h */
+ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */
+ __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */
+ uint32_t Reserved40C; /*!< Reserved 40Ch */
+ __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */
+ __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */
+ __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */
+} USB_OTG_HostTypeDef;
+
+/**
+ * @brief USB_OTG_Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */
+ __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */
+ __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */
+ __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */
+ __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */
+ __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */
+ uint32_t Reserved[2]; /*!< Reserved */
+} USB_OTG_HostChannelTypeDef;
+/**
+ * @}
+ */
+
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+#define RAMITCM_BASE ((uint32_t)0x00000000) /*!< Base address of :16KB RAM reserved for CPU execution/instruction accessible over ITCM */
+#define FLASHITCM_BASE ((uint32_t)0x00200000) /*!< Base address of :(up to 1 MB) embedded FLASH memory accessible over ITCM */
+#define FLASHAXI_BASE ((uint32_t)0x08000000) /*!< Base address of : (up to 1 MB) embedded FLASH memory accessible over AXI */
+#define RAMDTCM_BASE ((uint32_t)0x20000000) /*!< Base address of : 64KB system data RAM accessible over DTCM */
+#define SRAM1_BASE ((uint32_t)0x20010000) /*!< Base address of : 240KB RAM1 accessible over AXI/AHB */
+#define SRAM2_BASE ((uint32_t)0x2004C000) /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Base address of : AHB/ABP Peripherals */
+#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Base address of : Backup SRAM(4 KB) */
+#define QSPI_BASE ((uint32_t)0x90000000) /*!< Base address of : QSPI memories accessible over AXI */
+#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< Base address of : FMC Control registers */
+#define QSPI_R_BASE ((uint32_t)0xA0001000) /*!< Base address of : QSPI Control registers */
+#define FLASH_END ((uint32_t)0x080FFFFF) /*!< FLASH end address */
+
+/* Legacy define */
+#define FLASH_BASE FLASHAXI_BASE
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000)
+#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define I2C4_BASE (APB1PERIPH_BASE + 0x6000)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800)
+#define CEC_BASE (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
+#define UART7_BASE (APB1PERIPH_BASE + 0x7800)
+#define UART8_BASE (APB1PERIPH_BASE + 0x7C00)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000)
+#define SPI6_BASE (APB2PERIPH_BASE + 0x5400)
+#define SAI1_BASE (APB2PERIPH_BASE + 0x5800)
+#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00)
+#define SAI1_Block_A_BASE (SAI1_BASE + 0x004)
+#define SAI1_Block_B_BASE (SAI1_BASE + 0x024)
+#define SAI2_Block_A_BASE (SAI2_BASE + 0x004)
+#define SAI2_Block_B_BASE (SAI2_BASE + 0x024)
+#define LTDC_BASE (APB2PERIPH_BASE + 0x6800)
+#define LTDC_Layer1_BASE (LTDC_BASE + 0x84)
+#define LTDC_Layer2_BASE (LTDC_BASE + 0x104)
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000)
+#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400)
+#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+#define ETH_BASE (AHB1PERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000)
+#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000)
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800)
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000)
+#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104)
+#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080)
+#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE ((uint32_t )0x40040000)
+#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define I2C4 ((I2C_TypeDef *) I2C4_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define UART7 ((USART_TypeDef *) UART7_BASE)
+#define UART8 ((USART_TypeDef *) UART8_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define SPI6 ((SPI_TypeDef *) SPI6_BASE)
+#define SAI1 ((SAI_TypeDef *) SAI1_BASE)
+#define SAI2 ((SAI_TypeDef *) SAI2_BASE)
+#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE)
+#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE)
+#define LTDC ((LTDC_TypeDef *)LTDC_BASE)
+#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE)
+#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE)
+#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE)
+#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE)
+#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!© COPYRIGHT(c) 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx
+ * @{
+ */
+
+#ifndef __STM32F7xx_H
+#define __STM32F7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F7)
+#define STM32F7
+#endif /* STM32F7 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx)
+ /* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
+ STM32F756NG Devices */
+#define STM32F746xx /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG,
+ STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */
+ /* #define STM32F745xx */ /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V1.0.1
+ */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION ((__STM32F7xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F7xx_CMSIS_DEVICE_VERSION))
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+#if defined(STM32F756xx)
+ #include "stm32f756xx.h"
+#elif defined(STM32F746xx)
+ #include "stm32f746xx.h"
+#elif defined(STM32F745xx)
+ #include "stm32f745xx.h"
+#else
+ #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+/**
+ * @}
+ */
+
+#ifdef USE_HAL_DRIVER
+ #include "stm32f7xx_hal_conf.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F7xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h
new file mode 100644
index 00000000000..313fa4355ed
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h
@@ -0,0 +1,421 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 25-June-2015
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f7xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2015 STMicroelectronics © COPYRIGHT 2015 STMicroelectronics © COPYRIGHT(c) 2015 STMicroelectronics
+ 2
+
+ Debug
+
+ ARM
+
+ 1
+
+ C-SPY
+ 2
+
+ 26
+ 1
+ 1
+
+ CInput
+ 1
+
+
+ CEndian
+ 1
+
+
+ CProcessor
+ 1
+
+
+ OCVariant
+ 0
+
+
+ MacOverride
+ 0
+
+
+ MacFile
+
+
+ MemOverride
+ 0
+
+
+ MemFile
+ $TOOLKIT_DIR$\CONFIG\debugger\ST\STM32F746ZG.ddf
+
+
+ RunToEnable
+ 1
+
+
+ RunToName
+ main
+
+
+ CExtraOptionsCheck
+ 0
+
+
+ CExtraOptions
+
+
+ CFpuProcessor
+ 1
+
+
+ OCDDFArgumentProducer
+
+
+ OCDownloadSuppressDownload
+ 0
+
+
+ OCDownloadVerifyAll
+ 1
+
+
+ OCProductVersion
+ 7.30.4.8186
+
+
+ OCDynDriverList
+ STLINK_ID
+
+
+ OCLastSavedByProductVersion
+ 7.40.3.8937
+
+
+ OCDownloadAttachToProgram
+ 0
+
+
+ UseFlashLoader
+ 1
+
+
+ CLowLevel
+ 1
+
+
+ OCBE8Slave
+ 1
+
+
+ MacFile2
+
+
+ CDevice
+ 1
+
+
+ FlashLoadersV3
+ $TOOLKIT_DIR$\config\flashloader\ST\FlashSTM32F756xG.board
+
+
+ OCImagesSuppressCheck1
+ 0
+
+
+ OCImagesPath1
+
+
+ OCImagesSuppressCheck2
+ 0
+
+
+ OCImagesPath2
+
+
+ OCImagesSuppressCheck3
+ 0
+
+
+ OCImagesPath3
+
+
+ OverrideDefFlashBoard
+ 0
+
+
+ OCImagesOffset1
+
+
+ OCImagesOffset2
+
+
+ OCImagesOffset3
+
+
+ OCImagesUse1
+ 0
+
+
+ OCImagesUse2
+ 0
+
+
+ OCImagesUse3
+ 0
+
+
+ OCDeviceConfigMacroFile
+ 1
+
+
+ OCDebuggerExtraOption
+ 1
+
+
+ OCAllMTBOptions
+ 1
+
+
+ OCMulticoreNrOfCores
+ 1
+
+
+ OCMulticoreMaster
+ 0
+
+
+ OCMulticorePort
+ 53461
+
+
+ OCMulticoreWorkspace
+
+
+ OCMulticoreSlaveProject
+
+
+ OCMulticoreSlaveConfiguration
+
+
+
+
+ ARMSIM_ID
+ 2
+
+ 1
+ 1
+ 1
+
+ OCSimDriverInfo
+ 1
+
+
+ OCSimEnablePSP
+ 0
+
+
+ OCSimPspOverrideConfig
+ 0
+
+
+ OCSimPspConfigFile
+
+
+
+
+ ANGEL_ID
+ 2
+
+ 0
+ 1
+ 1
+
+ CCAngelHeartbeat
+ 1
+
+
+ CAngelCommunication
+ 1
+
+
+ CAngelCommBaud
+ 0
+ 3
+
+
+ CAngelCommPort
+ 0
+ 0
+
+
+ ANGELTCPIP
+ aaa.bbb.ccc.ddd
+
+
+ DoAngelLogfile
+ 0
+
+
+ AngelLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ CMSISDAP_ID
+ 2
+
+ 2
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ CMSISDAPAttachSlave
+ 1
+
+
+ OCIarProbeScriptFile
+ 1
+
+
+ CMSISDAPResetList
+ 1
+ 10
+
+
+ CMSISDAPHWResetDuration
+ 300
+
+
+ CMSISDAPHWResetDelay
+ 200
+
+
+ CMSISDAPDoLogfile
+ 0
+
+
+ CMSISDAPLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CMSISDAPInterfaceRadio
+ 0
+
+
+ CMSISDAPInterfaceCmdLine
+ 0
+
+
+ CMSISDAPMultiTargetEnable
+ 0
+
+
+ CMSISDAPMultiTarget
+ 0
+
+
+ CMSISDAPJtagSpeedList
+ 0
+ 0
+
+
+ CMSISDAPBreakpointRadio
+ 0
+
+
+ CMSISDAPRestoreBreakpointsCheck
+ 0
+
+
+ CMSISDAPUpdateBreakpointsEdit
+ _call_main
+
+
+ RDICatchReset
+ 0
+
+
+ RDICatchUndef
+ 1
+
+
+ RDICatchSWI
+ 0
+
+
+ RDICatchData
+ 1
+
+
+ RDICatchPrefetch
+ 1
+
+
+ RDICatchIRQ
+ 0
+
+
+ RDICatchFIQ
+ 0
+
+
+ CatchCORERESET
+ 0
+
+
+ CatchMMERR
+ 1
+
+
+ CatchNOCPERR
+ 1
+
+
+ CatchCHKERR
+ 1
+
+
+ CatchSTATERR
+ 1
+
+
+ CatchBUSERR
+ 1
+
+
+ CatchINTERR
+ 1
+
+
+ CatchHARDERR
+ 1
+
+
+ CatchDummy
+ 0
+
+
+ CMSISDAPMultiCPUEnable
+ 0
+
+
+ CMSISDAPMultiCPUNumber
+ 0
+
+
+ OCProbeCfgOverride
+ 0
+
+
+ OCProbeConfig
+
+
+ CMSISDAPProbeConfigRadio
+ 0
+
+
+ CMSISDAPSelectedCPUBehaviour
+ 0
+
+
+ ICpuName
+
+
+ OCJetEmuParams
+ 1
+
+
+
+
+ GDBSERVER_ID
+ 2
+
+ 0
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ TCPIP
+ aaa.bbb.ccc.ddd
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCJTagBreakpointRadio
+ 0
+
+
+ CCJTagDoUpdateBreakpoints
+ 0
+
+
+ CCJTagUpdateBreakpoints
+ _call_main
+
+
+
+
+ IARROM_ID
+ 2
+
+ 1
+ 1
+ 1
+
+ CRomLogFileCheck
+ 0
+
+
+ CRomLogFileEditB
+ $PROJ_DIR$\cspycomm.log
+
+
+ CRomCommPort
+ 0
+ 0
+
+
+ CRomCommBaud
+ 0
+ 7
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ IJET_ID
+ 2
+
+ 6
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ IjetAttachSlave
+ 1
+
+
+ OCIarProbeScriptFile
+ 1
+
+
+ IjetResetList
+ 1
+ 10
+
+
+ IjetHWResetDuration
+ 300
+
+
+ IjetHWResetDelay
+ 200
+
+
+ IjetPowerFromProbe
+ 1
+
+
+ IjetPowerRadio
+ 0
+
+
+ IjetDoLogfile
+ 0
+
+
+ IjetLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ IjetInterfaceRadio
+ 0
+
+
+ IjetInterfaceCmdLine
+ 0
+
+
+ IjetMultiTargetEnable
+ 0
+
+
+ IjetMultiTarget
+ 0
+
+
+ IjetScanChainNonARMDevices
+ 0
+
+
+ IjetIRLength
+ 0
+
+
+ IjetJtagSpeedList
+ 0
+ 0
+
+
+ IjetProtocolRadio
+ 0
+
+
+ IjetSwoPin
+ 0
+
+
+ IjetCpuClockEdit
+ 72.0
+
+
+ IjetSwoPrescalerList
+ 1
+ 0
+
+
+ IjetBreakpointRadio
+ 0
+
+
+ IjetRestoreBreakpointsCheck
+ 0
+
+
+ IjetUpdateBreakpointsEdit
+ _call_main
+
+
+ RDICatchReset
+ 0
+
+
+ RDICatchUndef
+ 1
+
+
+ RDICatchSWI
+ 0
+
+
+ RDICatchData
+ 1
+
+
+ RDICatchPrefetch
+ 1
+
+
+ RDICatchIRQ
+ 0
+
+
+ RDICatchFIQ
+ 0
+
+
+ CatchCORERESET
+ 0
+
+
+ CatchMMERR
+ 1
+
+
+ CatchNOCPERR
+ 1
+
+
+ CatchCHKERR
+ 1
+
+
+ CatchSTATERR
+ 1
+
+
+ CatchBUSERR
+ 1
+
+
+ CatchINTERR
+ 1
+
+
+ CatchHARDERR
+ 1
+
+
+ CatchDummy
+ 0
+
+
+ OCProbeCfgOverride
+ 0
+
+
+ OCProbeConfig
+
+
+ IjetProbeConfigRadio
+ 0
+
+
+ IjetMultiCPUEnable
+ 0
+
+
+ IjetMultiCPUNumber
+ 0
+
+
+ IjetSelectedCPUBehaviour
+ 0
+
+
+ ICpuName
+
+
+ OCJetEmuParams
+ 1
+
+
+ IjetPreferETB
+ 1
+
+
+ IjetTraceSettingsList
+ 0
+ 0
+
+
+ IjetTraceSizeList
+ 0
+ 2
+
+
+ FlashBoardPathSlave
+ 0
+
+
+
+
+ JLINK_ID
+ 2
+
+ 15
+ 1
+ 1
+
+ JLinkSpeed
+ 1000
+
+
+ CCJLinkDoLogfile
+ 0
+
+
+ CCJLinkLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCJLinkHWResetDelay
+ 0
+
+
+ OCDriverInfo
+ 1
+
+
+ JLinkInitialSpeed
+ 1000
+
+
+ CCDoJlinkMultiTarget
+ 0
+
+
+ CCScanChainNonARMDevices
+ 0
+
+
+ CCJLinkMultiTarget
+ 0
+
+
+ CCJLinkIRLength
+ 0
+
+
+ CCJLinkCommRadio
+ 0
+
+
+ CCJLinkTCPIP
+ aaa.bbb.ccc.ddd
+
+
+ CCJLinkSpeedRadioV2
+ 0
+
+
+ CCUSBDevice
+ 1
+ 1
+
+
+ CCRDICatchReset
+ 0
+
+
+ CCRDICatchUndef
+ 0
+
+
+ CCRDICatchSWI
+ 0
+
+
+ CCRDICatchData
+ 0
+
+
+ CCRDICatchPrefetch
+ 0
+
+
+ CCRDICatchIRQ
+ 0
+
+
+ CCRDICatchFIQ
+ 0
+
+
+ CCJLinkBreakpointRadio
+ 0
+
+
+ CCJLinkDoUpdateBreakpoints
+ 0
+
+
+ CCJLinkUpdateBreakpoints
+ _call_main
+
+
+ CCJLinkInterfaceRadio
+ 0
+
+
+ OCJLinkAttachSlave
+ 1
+
+
+ CCJLinkResetList
+ 6
+ 5
+
+
+ CCJLinkInterfaceCmdLine
+ 0
+
+
+ CCCatchCORERESET
+ 0
+
+
+ CCCatchMMERR
+ 0
+
+
+ CCCatchNOCPERR
+ 0
+
+
+ CCCatchCHRERR
+ 0
+
+
+ CCCatchSTATERR
+ 0
+
+
+ CCCatchBUSERR
+ 0
+
+
+ CCCatchINTERR
+ 0
+
+
+ CCCatchHARDERR
+ 0
+
+
+ CCCatchDummy
+ 0
+
+
+ OCJLinkScriptFile
+ 1
+
+
+ CCJLinkUsbSerialNo
+
+
+ CCTcpIpAlt
+ 0
+ 0
+
+
+ CCJLinkTcpIpSerialNo
+
+
+ CCCpuClockEdit
+ 72.0
+
+
+ CCSwoClockAuto
+ 0
+
+
+ CCSwoClockEdit
+ 2000
+
+
+ OCJLinkTraceSource
+ 0
+
+
+ OCJLinkTraceSourceDummy
+ 0
+
+
+ OCJLinkDeviceName
+ 1
+
+
+
+
+ LMIFTDI_ID
+ 2
+
+ 2
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ LmiftdiSpeed
+ 500
+
+
+ CCLmiftdiDoLogfile
+ 0
+
+
+ CCLmiftdiLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCLmiFtdiInterfaceRadio
+ 0
+
+
+ CCLmiFtdiInterfaceCmdLine
+ 0
+
+
+
+
+ MACRAIGOR_ID
+ 2
+
+ 3
+ 1
+ 1
+
+ jtag
+ 0
+ 0
+
+
+ EmuSpeed
+ 1
+
+
+ TCPIP
+ aaa.bbb.ccc.ddd
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ DoEmuMultiTarget
+ 0
+
+
+ EmuMultiTarget
+ 0@ARM7TDMI
+
+
+ EmuHWReset
+ 0
+
+
+ CEmuCommBaud
+ 0
+ 4
+
+
+ CEmuCommPort
+ 0
+ 0
+
+
+ jtago
+ 0
+ 0
+
+
+ OCDriverInfo
+ 1
+
+
+ UnusedAddr
+ 0x00800000
+
+
+ CCMacraigorHWResetDelay
+
+
+ CCJTagBreakpointRadio
+ 0
+
+
+ CCJTagDoUpdateBreakpoints
+ 0
+
+
+ CCJTagUpdateBreakpoints
+ _call_main
+
+
+ CCMacraigorInterfaceRadio
+ 0
+
+
+ CCMacraigorInterfaceCmdLine
+ 0
+
+
+
+
+ PEMICRO_ID
+ 2
+
+ 1
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ OCPEMicroAttachSlave
+ 1
+
+
+ CCPEMicroInterfaceList
+ 0
+ 0
+
+
+ CCPEMicroResetDelay
+
+
+ CCPEMicroJtagSpeed
+ #UNINITIALIZED#
+
+
+ CCJPEMicroShowSettings
+ 0
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCPEMicroUSBDevice
+ 0
+ 0
+
+
+ CCPEMicroSerialPort
+ 0
+ 0
+
+
+ CCJPEMicroTCPIPAutoScanNetwork
+ 1
+
+
+ CCPEMicroTCPIP
+ 10.0.0.1
+
+
+ CCPEMicroCommCmdLineProducer
+ 0
+
+
+ CCSTLinkInterfaceRadio
+ 0
+
+
+ CCSTLinkInterfaceCmdLine
+ 0
+
+
+
+
+ RDI_ID
+ 2
+
+ 2
+ 1
+ 1
+
+ CRDIDriverDll
+ ###Uninitialized###
+
+
+ CRDILogFileCheck
+ 0
+
+
+ CRDILogFileEdit
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCRDIHWReset
+ 0
+
+
+ CCRDICatchReset
+ 0
+
+
+ CCRDICatchUndef
+ 0
+
+
+ CCRDICatchSWI
+ 0
+
+
+ CCRDICatchData
+ 0
+
+
+ CCRDICatchPrefetch
+ 0
+
+
+ CCRDICatchIRQ
+ 0
+
+
+ CCRDICatchFIQ
+ 0
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ STLINK_ID
+ 2
+
+ 2
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ CCSTLinkInterfaceRadio
+ 1
+
+
+ CCSTLinkInterfaceCmdLine
+ 0
+
+
+ CCSTLinkResetList
+ 1
+ 2
+
+
+ CCCpuClockEdit
+ 72.0
+
+
+ CCSwoClockAuto
+ 1
+
+
+ CCSwoClockEdit
+ 2000
+
+
+
+
+ THIRDPARTY_ID
+ 2
+
+ 0
+ 1
+ 1
+
+ CThirdPartyDriverDll
+ Browse to your third-party driver
+
+
+ CThirdPartyLogFileCheck
+ 0
+
+
+ CThirdPartyLogFileEditB
+ $PROJ_DIR$\cspycomm.log
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ XDS100_ID
+ 2
+
+ 4
+ 1
+ 1
+
+ OCDriverInfo
+ 1
+
+
+ OCXDS100AttachSlave
+ 1
+
+
+ TIPackageOverride
+ 0
+
+
+ TIPackage
+
+
+ BoardFile
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCXds100BreakpointRadio
+ 0
+
+
+ CCXds100DoUpdateBreakpoints
+ 0
+
+
+ CCXds100UpdateBreakpoints
+ _call_main
+
+
+ CCXds100CatchReset
+ 0
+
+
+ CCXds100CatchUndef
+ 0
+
+
+ CCXds100CatchSWI
+ 0
+
+
+ CCXds100CatchData
+ 0
+
+
+ CCXds100CatchPrefetch
+ 0
+
+
+ CCXds100CatchIRQ
+ 0
+
+
+ CCXds100CatchFIQ
+ 0
+
+
+ CCXds100CatchCORERESET
+ 0
+
+
+ CCXds100CatchMMERR
+ 0
+
+
+ CCXds100CatchNOCPERR
+ 0
+
+
+ CCXds100CatchCHRERR
+ 0
+
+
+ CCXds100CatchSTATERR
+ 0
+
+
+ CCXds100CatchBUSERR
+ 0
+
+
+ CCXds100CatchINTERR
+ 0
+
+
+ CCXds100CatchHARDERR
+ 0
+
+
+ CCXds100CatchDummy
+ 0
+
+
+ CCXds100CpuClockEdit
+ 72.0
+
+
+ CCXds100SwoClockAuto
+ 0
+
+
+ CCXds100SwoClockEdit
+ 1000
+
+
+ CCXds100HWResetDelay
+ 0
+
+
+ CCXds100ResetList
+ 0
+ 0
+
+
+ CCXds100UsbSerialNo
+
+
+ CCXds100UsbSerialNoSelect
+ 0
+
+
+ CCXds100JtagSpeedList
+ 0
+ 0
+
+
+ CCXds100InterfaceRadio
+ 0
+
+
+ CCXds100InterfaceCmdLine
+ 0
+
+
+ CCXds100ProbeList
+ 0
+ 0
+
+
+
+
+
+ $TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB7_Plugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin
+ 0
+
+
+ $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin
+ 1
+
+
+ $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin
+ 0
+
+
+ $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin
+ 1
+
+
+ $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin
+ 0
+
+
+
+
+ Release
+
+ ARM
+
+ 0
+
+ C-SPY
+ 2
+
+ 26
+ 1
+ 0
+
+ CInput
+ 1
+
+
+ CEndian
+ 1
+
+
+ CProcessor
+ 1
+
+
+ OCVariant
+ 0
+
+
+ MacOverride
+ 0
+
+
+ MacFile
+
+
+ MemOverride
+ 0
+
+
+ MemFile
+
+
+ RunToEnable
+ 1
+
+
+ RunToName
+ main
+
+
+ CExtraOptionsCheck
+ 0
+
+
+ CExtraOptions
+
+
+ CFpuProcessor
+ 1
+
+
+ OCDDFArgumentProducer
+
+
+ OCDownloadSuppressDownload
+ 0
+
+
+ OCDownloadVerifyAll
+ 0
+
+
+ OCProductVersion
+ 7.30.4.8186
+
+
+ OCDynDriverList
+ ARMSIM_ID
+
+
+ OCLastSavedByProductVersion
+
+
+ OCDownloadAttachToProgram
+ 0
+
+
+ UseFlashLoader
+ 0
+
+
+ CLowLevel
+ 1
+
+
+ OCBE8Slave
+ 1
+
+
+ MacFile2
+
+
+ CDevice
+ 1
+
+
+ FlashLoadersV3
+
+
+ OCImagesSuppressCheck1
+ 0
+
+
+ OCImagesPath1
+
+
+ OCImagesSuppressCheck2
+ 0
+
+
+ OCImagesPath2
+
+
+ OCImagesSuppressCheck3
+ 0
+
+
+ OCImagesPath3
+
+
+ OverrideDefFlashBoard
+ 0
+
+
+ OCImagesOffset1
+
+
+ OCImagesOffset2
+
+
+ OCImagesOffset3
+
+
+ OCImagesUse1
+ 0
+
+
+ OCImagesUse2
+ 0
+
+
+ OCImagesUse3
+ 0
+
+
+ OCDeviceConfigMacroFile
+ 1
+
+
+ OCDebuggerExtraOption
+ 1
+
+
+ OCAllMTBOptions
+ 1
+
+
+ OCMulticoreNrOfCores
+ 1
+
+
+ OCMulticoreMaster
+ 0
+
+
+ OCMulticorePort
+ 53461
+
+
+ OCMulticoreWorkspace
+
+
+ OCMulticoreSlaveProject
+
+
+ OCMulticoreSlaveConfiguration
+
+
+
+
+ ARMSIM_ID
+ 2
+
+ 1
+ 1
+ 0
+
+ OCSimDriverInfo
+ 1
+
+
+ OCSimEnablePSP
+ 0
+
+
+ OCSimPspOverrideConfig
+ 0
+
+
+ OCSimPspConfigFile
+
+
+
+
+ ANGEL_ID
+ 2
+
+ 0
+ 1
+ 0
+
+ CCAngelHeartbeat
+ 1
+
+
+ CAngelCommunication
+ 1
+
+
+ CAngelCommBaud
+ 0
+ 3
+
+
+ CAngelCommPort
+ 0
+ 0
+
+
+ ANGELTCPIP
+ aaa.bbb.ccc.ddd
+
+
+ DoAngelLogfile
+ 0
+
+
+ AngelLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ CMSISDAP_ID
+ 2
+
+ 2
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ CMSISDAPAttachSlave
+ 1
+
+
+ OCIarProbeScriptFile
+ 1
+
+
+ CMSISDAPResetList
+ 1
+ 10
+
+
+ CMSISDAPHWResetDuration
+ 300
+
+
+ CMSISDAPHWResetDelay
+ 200
+
+
+ CMSISDAPDoLogfile
+ 0
+
+
+ CMSISDAPLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CMSISDAPInterfaceRadio
+ 0
+
+
+ CMSISDAPInterfaceCmdLine
+ 0
+
+
+ CMSISDAPMultiTargetEnable
+ 0
+
+
+ CMSISDAPMultiTarget
+ 0
+
+
+ CMSISDAPJtagSpeedList
+ 0
+ 0
+
+
+ CMSISDAPBreakpointRadio
+ 0
+
+
+ CMSISDAPRestoreBreakpointsCheck
+ 0
+
+
+ CMSISDAPUpdateBreakpointsEdit
+ _call_main
+
+
+ RDICatchReset
+ 0
+
+
+ RDICatchUndef
+ 1
+
+
+ RDICatchSWI
+ 0
+
+
+ RDICatchData
+ 1
+
+
+ RDICatchPrefetch
+ 1
+
+
+ RDICatchIRQ
+ 0
+
+
+ RDICatchFIQ
+ 0
+
+
+ CatchCORERESET
+ 0
+
+
+ CatchMMERR
+ 1
+
+
+ CatchNOCPERR
+ 1
+
+
+ CatchCHKERR
+ 1
+
+
+ CatchSTATERR
+ 1
+
+
+ CatchBUSERR
+ 1
+
+
+ CatchINTERR
+ 1
+
+
+ CatchHARDERR
+ 1
+
+
+ CatchDummy
+ 0
+
+
+ CMSISDAPMultiCPUEnable
+ 0
+
+
+ CMSISDAPMultiCPUNumber
+ 0
+
+
+ OCProbeCfgOverride
+ 0
+
+
+ OCProbeConfig
+
+
+ CMSISDAPProbeConfigRadio
+ 0
+
+
+ CMSISDAPSelectedCPUBehaviour
+ 0
+
+
+ ICpuName
+
+
+ OCJetEmuParams
+ 1
+
+
+
+
+ GDBSERVER_ID
+ 2
+
+ 0
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ TCPIP
+ aaa.bbb.ccc.ddd
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCJTagBreakpointRadio
+ 0
+
+
+ CCJTagDoUpdateBreakpoints
+ 0
+
+
+ CCJTagUpdateBreakpoints
+ _call_main
+
+
+
+
+ IARROM_ID
+ 2
+
+ 1
+ 1
+ 0
+
+ CRomLogFileCheck
+ 0
+
+
+ CRomLogFileEditB
+ $PROJ_DIR$\cspycomm.log
+
+
+ CRomCommPort
+ 0
+ 0
+
+
+ CRomCommBaud
+ 0
+ 7
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ IJET_ID
+ 2
+
+ 6
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ IjetAttachSlave
+ 1
+
+
+ OCIarProbeScriptFile
+ 1
+
+
+ IjetResetList
+ 1
+ 10
+
+
+ IjetHWResetDuration
+ 300
+
+
+ IjetHWResetDelay
+ 200
+
+
+ IjetPowerFromProbe
+ 1
+
+
+ IjetPowerRadio
+ 0
+
+
+ IjetDoLogfile
+ 0
+
+
+ IjetLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ IjetInterfaceRadio
+ 0
+
+
+ IjetInterfaceCmdLine
+ 0
+
+
+ IjetMultiTargetEnable
+ 0
+
+
+ IjetMultiTarget
+ 0
+
+
+ IjetScanChainNonARMDevices
+ 0
+
+
+ IjetIRLength
+ 0
+
+
+ IjetJtagSpeedList
+ 0
+ 0
+
+
+ IjetProtocolRadio
+ 0
+
+
+ IjetSwoPin
+ 0
+
+
+ IjetCpuClockEdit
+ 72.0
+
+
+ IjetSwoPrescalerList
+ 1
+ 0
+
+
+ IjetBreakpointRadio
+ 0
+
+
+ IjetRestoreBreakpointsCheck
+ 0
+
+
+ IjetUpdateBreakpointsEdit
+ _call_main
+
+
+ RDICatchReset
+ 0
+
+
+ RDICatchUndef
+ 1
+
+
+ RDICatchSWI
+ 0
+
+
+ RDICatchData
+ 1
+
+
+ RDICatchPrefetch
+ 1
+
+
+ RDICatchIRQ
+ 0
+
+
+ RDICatchFIQ
+ 0
+
+
+ CatchCORERESET
+ 0
+
+
+ CatchMMERR
+ 1
+
+
+ CatchNOCPERR
+ 1
+
+
+ CatchCHKERR
+ 1
+
+
+ CatchSTATERR
+ 1
+
+
+ CatchBUSERR
+ 1
+
+
+ CatchINTERR
+ 1
+
+
+ CatchHARDERR
+ 1
+
+
+ CatchDummy
+ 0
+
+
+ OCProbeCfgOverride
+ 0
+
+
+ OCProbeConfig
+
+
+ IjetProbeConfigRadio
+ 0
+
+
+ IjetMultiCPUEnable
+ 0
+
+
+ IjetMultiCPUNumber
+ 0
+
+
+ IjetSelectedCPUBehaviour
+ 0
+
+
+ ICpuName
+
+
+ OCJetEmuParams
+ 1
+
+
+ IjetPreferETB
+ 1
+
+
+ IjetTraceSettingsList
+ 0
+ 0
+
+
+ IjetTraceSizeList
+ 0
+ 2
+
+
+ FlashBoardPathSlave
+ 0
+
+
+
+
+ JLINK_ID
+ 2
+
+ 15
+ 1
+ 0
+
+ JLinkSpeed
+ 1000
+
+
+ CCJLinkDoLogfile
+ 0
+
+
+ CCJLinkLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCJLinkHWResetDelay
+ 0
+
+
+ OCDriverInfo
+ 1
+
+
+ JLinkInitialSpeed
+ 1000
+
+
+ CCDoJlinkMultiTarget
+ 0
+
+
+ CCScanChainNonARMDevices
+ 0
+
+
+ CCJLinkMultiTarget
+ 0
+
+
+ CCJLinkIRLength
+ 0
+
+
+ CCJLinkCommRadio
+ 0
+
+
+ CCJLinkTCPIP
+ aaa.bbb.ccc.ddd
+
+
+ CCJLinkSpeedRadioV2
+ 0
+
+
+ CCUSBDevice
+ 1
+ 1
+
+
+ CCRDICatchReset
+ 0
+
+
+ CCRDICatchUndef
+ 0
+
+
+ CCRDICatchSWI
+ 0
+
+
+ CCRDICatchData
+ 0
+
+
+ CCRDICatchPrefetch
+ 0
+
+
+ CCRDICatchIRQ
+ 0
+
+
+ CCRDICatchFIQ
+ 0
+
+
+ CCJLinkBreakpointRadio
+ 0
+
+
+ CCJLinkDoUpdateBreakpoints
+ 0
+
+
+ CCJLinkUpdateBreakpoints
+ _call_main
+
+
+ CCJLinkInterfaceRadio
+ 0
+
+
+ OCJLinkAttachSlave
+ 1
+
+
+ CCJLinkResetList
+ 6
+ 5
+
+
+ CCJLinkInterfaceCmdLine
+ 0
+
+
+ CCCatchCORERESET
+ 0
+
+
+ CCCatchMMERR
+ 0
+
+
+ CCCatchNOCPERR
+ 0
+
+
+ CCCatchCHRERR
+ 0
+
+
+ CCCatchSTATERR
+ 0
+
+
+ CCCatchBUSERR
+ 0
+
+
+ CCCatchINTERR
+ 0
+
+
+ CCCatchHARDERR
+ 0
+
+
+ CCCatchDummy
+ 0
+
+
+ OCJLinkScriptFile
+ 1
+
+
+ CCJLinkUsbSerialNo
+
+
+ CCTcpIpAlt
+ 0
+ 0
+
+
+ CCJLinkTcpIpSerialNo
+
+
+ CCCpuClockEdit
+ 72.0
+
+
+ CCSwoClockAuto
+ 0
+
+
+ CCSwoClockEdit
+ 2000
+
+
+ OCJLinkTraceSource
+ 0
+
+
+ OCJLinkTraceSourceDummy
+ 0
+
+
+ OCJLinkDeviceName
+ 1
+
+
+
+
+ LMIFTDI_ID
+ 2
+
+ 2
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ LmiftdiSpeed
+ 500
+
+
+ CCLmiftdiDoLogfile
+ 0
+
+
+ CCLmiftdiLogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCLmiFtdiInterfaceRadio
+ 0
+
+
+ CCLmiFtdiInterfaceCmdLine
+ 0
+
+
+
+
+ MACRAIGOR_ID
+ 2
+
+ 3
+ 1
+ 0
+
+ jtag
+ 0
+ 0
+
+
+ EmuSpeed
+ 1
+
+
+ TCPIP
+ aaa.bbb.ccc.ddd
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ DoEmuMultiTarget
+ 0
+
+
+ EmuMultiTarget
+ 0@ARM7TDMI
+
+
+ EmuHWReset
+ 0
+
+
+ CEmuCommBaud
+ 0
+ 4
+
+
+ CEmuCommPort
+ 0
+ 0
+
+
+ jtago
+ 0
+ 0
+
+
+ OCDriverInfo
+ 1
+
+
+ UnusedAddr
+ 0x00800000
+
+
+ CCMacraigorHWResetDelay
+
+
+ CCJTagBreakpointRadio
+ 0
+
+
+ CCJTagDoUpdateBreakpoints
+ 0
+
+
+ CCJTagUpdateBreakpoints
+ _call_main
+
+
+ CCMacraigorInterfaceRadio
+ 0
+
+
+ CCMacraigorInterfaceCmdLine
+ 0
+
+
+
+
+ PEMICRO_ID
+ 2
+
+ 1
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ OCPEMicroAttachSlave
+ 1
+
+
+ CCPEMicroInterfaceList
+ 0
+ 0
+
+
+ CCPEMicroResetDelay
+
+
+ CCPEMicroJtagSpeed
+ #UNINITIALIZED#
+
+
+ CCJPEMicroShowSettings
+ 0
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCPEMicroUSBDevice
+ 0
+ 0
+
+
+ CCPEMicroSerialPort
+ 0
+ 0
+
+
+ CCJPEMicroTCPIPAutoScanNetwork
+ 1
+
+
+ CCPEMicroTCPIP
+ 10.0.0.1
+
+
+ CCPEMicroCommCmdLineProducer
+ 0
+
+
+ CCSTLinkInterfaceRadio
+ 0
+
+
+ CCSTLinkInterfaceCmdLine
+ 0
+
+
+
+
+ RDI_ID
+ 2
+
+ 2
+ 1
+ 0
+
+ CRDIDriverDll
+ ###Uninitialized###
+
+
+ CRDILogFileCheck
+ 0
+
+
+ CRDILogFileEdit
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCRDIHWReset
+ 0
+
+
+ CCRDICatchReset
+ 0
+
+
+ CCRDICatchUndef
+ 0
+
+
+ CCRDICatchSWI
+ 0
+
+
+ CCRDICatchData
+ 0
+
+
+ CCRDICatchPrefetch
+ 0
+
+
+ CCRDICatchIRQ
+ 0
+
+
+ CCRDICatchFIQ
+ 0
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ STLINK_ID
+ 2
+
+ 2
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ CCSTLinkInterfaceRadio
+ 0
+
+
+ CCSTLinkInterfaceCmdLine
+ 0
+
+
+ CCSTLinkResetList
+ 1
+ 0
+
+
+ CCCpuClockEdit
+ 72.0
+
+
+ CCSwoClockAuto
+ 0
+
+
+ CCSwoClockEdit
+ 2000
+
+
+
+
+ THIRDPARTY_ID
+ 2
+
+ 0
+ 1
+ 0
+
+ CThirdPartyDriverDll
+ ###Uninitialized###
+
+
+ CThirdPartyLogFileCheck
+ 0
+
+
+ CThirdPartyLogFileEditB
+ $PROJ_DIR$\cspycomm.log
+
+
+ OCDriverInfo
+ 1
+
+
+
+
+ XDS100_ID
+ 2
+
+ 4
+ 1
+ 0
+
+ OCDriverInfo
+ 1
+
+
+ OCXDS100AttachSlave
+ 1
+
+
+ TIPackageOverride
+ 0
+
+
+ TIPackage
+
+
+ BoardFile
+
+
+ DoLogfile
+ 0
+
+
+ LogFile
+ $PROJ_DIR$\cspycomm.log
+
+
+ CCXds100BreakpointRadio
+ 0
+
+
+ CCXds100DoUpdateBreakpoints
+ 0
+
+
+ CCXds100UpdateBreakpoints
+ _call_main
+
+
+ CCXds100CatchReset
+ 0
+
+
+ CCXds100CatchUndef
+ 0
+
+
+ CCXds100CatchSWI
+ 0
+
+
+ CCXds100CatchData
+ 0
+
+
+ CCXds100CatchPrefetch
+ 0
+
+
+ CCXds100CatchIRQ
+ 0
+
+
+ CCXds100CatchFIQ
+ 0
+
+
+ CCXds100CatchCORERESET
+ 0
+
+
+ CCXds100CatchMMERR
+ 0
+
+
+ CCXds100CatchNOCPERR
+ 0
+
+
+ CCXds100CatchCHRERR
+ 0
+
+
+ CCXds100CatchSTATERR
+ 0
+
+
+ CCXds100CatchBUSERR
+ 0
+
+
+ CCXds100CatchINTERR
+ 0
+
+
+ CCXds100CatchHARDERR
+ 0
+
+
+ CCXds100CatchDummy
+ 0
+
+
+ CCXds100CpuClockEdit
+ 72.0
+
+
+ CCXds100SwoClockAuto
+ 0
+
+
+ CCXds100SwoClockEdit
+ 1000
+
+
+ CCXds100HWResetDelay
+ 0
+
+
+ CCXds100ResetList
+ 0
+ 0
+
+
+ CCXds100UsbSerialNo
+
+
+ CCXds100UsbSerialNoSelect
+ 0
+
+
+ CCXds100JtagSpeedList
+ 0
+ 0
+
+
+ CCXds100InterfaceRadio
+ 0
+
+
+ CCXds100InterfaceCmdLine
+ 0
+
+
+ CCXds100ProbeList
+ 0
+ 0
+
+
+
+
+
+ $TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB7_Plugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin
+ 0
+
+
+ $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin
+ 0
+
+
+ $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin
+ 1
+
+
+ $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin
+ 0
+
+
+ $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin
+ 1
+
+
+ $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin
+ 0
+
+
+
+
+
diff --git a/workspace_tools/export/iar_nucleo_f746zg.ewp.tmpl b/workspace_tools/export/iar_nucleo_f746zg.ewp.tmpl
new file mode 100644
index 00000000000..9727b84c500
--- /dev/null
+++ b/workspace_tools/export/iar_nucleo_f746zg.ewp.tmpl
@@ -0,0 +1,1927 @@
+
+
+
+ 2
+
+ Debug
+
+ ARM
+
+ 1
+
+ General
+ 3
+
+ 24
+ 1
+ 1
+
+ ExePath
+ Debug\Exe
+
+
+ ObjPath
+ Debug\Obj
+
+
+ ListPath
+ Debug\List
+
+
+ GEndianMode
+ 0
+
+
+ Input variant
+ 3
+ 1
+
+
+ Input description
+ Full formatting.
+
+
+ Output variant
+ 2
+ 1
+
+
+ Output description
+ Full formatting.
+
+
+ GOutputBinary
+ 0
+
+
+ OGCoreOrChip
+ 1
+
+
+ GRuntimeLibSelect
+ 0
+ 2
+
+
+ GRuntimeLibSelectSlave
+ 0
+ 2
+
+
+ RTDescription
+ Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.
+
+
+ OGProductVersion
+ 5.10.0.159
+
+
+ OGLastSavedByProductVersion
+ 7.40.3.8937
+
+
+ GeneralEnableMisra
+ 0
+
+
+ GeneralMisraVerbose
+ 0
+
+
+ OGChipSelectEditMenu
+ STM32F746ZG ST STM32F746ZG
+
+
+ GenLowLevelInterface
+ 1
+
+
+ GEndianModeBE
+ 1
+
+
+ OGBufferedTerminalOutput
+ 0
+
+
+ GenStdoutInterface
+ 0
+
+
+ GeneralMisraRules98
+ 0
+ 1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111
+
+
+ GeneralMisraVer
+ 0
+
+
+ GeneralMisraRules04
+ 0
+ 111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111
+
+
+ RTConfigPath2
+ $TOOLKIT_DIR$\INC\c\DLib_Config_Full.h
+
+
+ GBECoreSlave
+ 22
+ 41
+
+
+ OGUseCmsis
+ 0
+
+
+ OGUseCmsisDspLib
+ 0
+
+
+ GRuntimeLibThreads
+ 0
+
+
+ CoreVariant
+ 22
+ 41
+
+
+ GFPUDeviceSlave
+ STM32F746ZG ST STM32F746ZG
+
+
+ FPU2
+ 0
+ 6
+
+
+ NrRegs
+ 0
+ 1
+
+
+ NEON
+ 0
+
+
+ GFPUCoreSlave2
+ 22
+ 41
+
+
+
+
+ ICCARM
+ 2
+
+ 31
+ 1
+ 1
+
+ CCOptimizationNoSizeConstraints
+ 0
+
+
+ CCDefines
+ {% for s in symbols %}
+ {{s}}
+ {% endfor %}
+
+
+ CCPreprocFile
+ 0
+
+
+ CCPreprocComments
+ 0
+
+
+ CCPreprocLine
+ 0
+
+
+ CCListCFile
+ 0
+
+
+ CCListCMnemonics
+ 0
+
+
+ CCListCMessages
+ 0
+
+
+ CCListAssFile
+ 0
+
+
+ CCListAssSource
+ 0
+
+
+ CCEnableRemarks
+ 0
+
+
+ CCDiagSuppress
+ Pa050,Pa084,Pa093,Pa082
+
+
+ CCDiagRemark
+
+
+ CCDiagWarning
+
+
+ CCDiagError
+
+
+ CCObjPrefix
+ 1
+
+
+ CCAllowList
+ 1
+ 00000000
+
+
+ CCDebugInfo
+ 1
+
+
+ IEndianMode
+ 1
+
+
+ IProcessor
+ 1
+
+
+ IExtraOptionsCheck
+ 0
+
+
+ IExtraOptions
+
+
+ CCLangConformance
+ 0
+
+
+ CCSignedPlainChar
+ 1
+
+
+ CCRequirePrototypes
+ 0
+
+
+ CCMultibyteSupport
+ 0
+
+
+ CCDiagWarnAreErr
+ 0
+
+
+ CCCompilerRuntimeInfo
+ 0
+
+
+ IFpuProcessor
+ 1
+
+
+ OutputFile
+ $FILE_BNAME$.o
+
+
+ CCLibConfigHeader
+ 1
+
+
+ PreInclude
+
+
+ CompilerMisraOverride
+ 0
+
+
+ CCIncludePath2
+ {% for path in include_paths %}
+ $PROJ_DIR$\{{path}}
+ {% endfor %}
+
+
+ CCStdIncCheck
+ 0
+
+
+ CCCodeSection
+ .text
+
+
+ IInterwork2
+ 0
+
+
+ IProcessorMode2
+ 1
+
+
+ CCOptLevel
+ 0
+
+
+ CCOptStrategy
+ 0
+ 0
+
+
+ CCOptLevelSlave
+ 0
+
+
+ CompilerMisraRules98
+ 0
+ 1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111
+
+
+ CompilerMisraRules04
+ 0
+ 111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111
+
+
+ CCPosIndRopi
+ 0
+
+
+ CCPosIndRwpi
+ 0
+
+
+ CCPosIndNoDynInit
+ 0
+
+
+ IccLang
+ 2
+
+
+ IccCDialect
+ 1
+
+
+ IccAllowVLA
+ 1
+
+
+ IccCppDialect
+ 2
+
+
+ IccExceptions
+ 0
+
+
+ IccRTTI
+ 0
+
+
+ IccStaticDestr
+ 1
+
+
+ IccCppInlineSemantics
+ 0
+
+
+ IccCmsis
+ 1
+
+
+ IccFloatSemantics
+ 1
+
+
+ CCNoLiteralPool
+ 0
+
+
+ CCOptStrategySlave
+ 0
+ 0
+
+
+ CCGuardCalls
+ 1
+
+
+
+
+ AARM
+ 2
+
+ 9
+ 1
+ 1
+
+ AObjPrefix
+ 1
+
+
+ AEndian
+ 1
+
+
+ ACaseSensitivity
+ 1
+
+
+ MacroChars
+ 0
+ 0
+
+
+ AWarnEnable
+ 0
+
+
+ AWarnWhat
+ 0
+
+
+ AWarnOne
+
+
+ AWarnRange1
+
+
+ AWarnRange2
+
+
+ ADebug
+ 1
+
+
+ AltRegisterNames
+ 0
+
+
+ ADefines
+
+
+ AList
+ 0
+
+
+ AListHeader
+ 1
+
+
+ AListing
+ 1
+
+
+ Includes
+ 0
+
+
+ MacDefs
+ 0
+
+
+ MacExps
+ 1
+
+
+ MacExec
+ 0
+
+
+ OnlyAssed
+ 0
+
+
+ MultiLine
+ 0
+
+
+ PageLengthCheck
+ 0
+
+
+ PageLength
+ 80
+
+
+ TabSpacing
+ 8
+
+
+ AXRef
+ 0
+
+
+ AXRefDefines
+ 0
+
+
+ AXRefInternal
+ 0
+
+
+ AXRefDual
+ 0
+
+
+ AProcessor
+ 1
+
+
+ AFpuProcessor
+ 1
+
+
+ AOutputFile
+ $FILE_BNAME$.o
+
+
+ AMultibyteSupport
+ 0
+
+
+ ALimitErrorsCheck
+ 0
+
+
+ ALimitErrorsEdit
+ 100
+
+
+ AIgnoreStdInclude
+ 1
+
+
+ AUserIncludes
+
+
+ AExtraOptionsCheckV2
+ 0
+
+
+ AExtraOptionsV2
+
+
+ AsmNoLiteralPool
+ 0
+
+
+
+
+ OBJCOPY
+ 0
+
+ 1
+ 1
+ 1
+
+ OOCOutputFormat
+ 3
+ 3
+
+
+ OCOutputOverride
+ 0
+
+
+ OOCOutputFile
+ {{name}}.bin
+
+
+ OOCCommandLineProducer
+ 1
+
+
+ OOCObjCopyEnable
+ 1
+
+
+
+
+ CUSTOM
+ 3
+
+ 0
+
+
+
+ BICOMP
+ 0
+
+
+ BUILDACTION
+ 1
+
+
+
+
+ ILINK
+ 0
+
+ 16
+ 1
+ 1
+
+ IlinkOutputFile
+ cpp.out
+
+
+ IlinkLibIOConfig
+ 1
+
+
+ XLinkMisraHandler
+ 0
+
+
+ IlinkInputFileSlave
+ 0
+
+
+ IlinkDebugInfoEnable
+ 1
+
+
+ IlinkKeepSymbols
+
+
+ IlinkRawBinaryFile
+
+
+ IlinkRawBinarySymbol
+
+
+ IlinkRawBinarySegment
+
+
+ IlinkRawBinaryAlign
+
+
+ IlinkDefines
+
+
+ IlinkConfigDefines
+
+
+ IlinkMapFile
+ 0
+
+
+ IlinkLogFile
+ 0
+
+
+ IlinkLogInitialization
+ 0
+
+
+ IlinkLogModule
+ 0
+
+
+ IlinkLogSection
+ 0
+
+
+ IlinkLogVeneer
+ 0
+
+
+ IlinkIcfOverride
+ 1
+
+
+ IlinkIcfFile
+ $PROJ_DIR$\{{linker_script}}
+
+
+ IlinkIcfFileSlave
+
+
+ IlinkEnableRemarks
+ 0
+
+
+ IlinkSuppressDiags
+
+
+ IlinkTreatAsRem
+
+
+ IlinkTreatAsWarn
+
+
+ IlinkTreatAsErr
+
+
+ IlinkWarningsAreErrors
+ 0
+
+
+ IlinkUseExtraOptions
+ 1
+
+
+ IlinkExtraOptions
+ --skip_dynamic_initialization
+
+
+ IlinkLowLevelInterfaceSlave
+ 1
+
+
+ IlinkAutoLibEnable
+ 1
+
+
+ IlinkAdditionalLibs
+ {% for library in libraries %}
+ $PROJ_DIR$\{{library}}
+ {% endfor %}
+ {% for object in object_files %}
+ $PROJ_DIR$\{{object}}
+ {% endfor %}
+
+
+ IlinkOverrideProgramEntryLabel
+ 0
+
+
+ IlinkProgramEntryLabelSelect
+ 0
+
+
+ IlinkProgramEntryLabel
+ __iar_program_start
+
+
+ DoFill
+ 0
+
+
+ FillerByte
+ 0xFF
+
+
+ FillerStart
+ 0x0
+
+
+ FillerEnd
+ 0x0
+
+
+ CrcSize
+ 0
+ 1
+
+
+ CrcAlign
+ 1
+
+
+ CrcPoly
+ 0x11021
+
+
+ CrcCompl
+ 0
+ 0
+
+
+ CrcBitOrder
+ 0
+ 0
+
+
+ CrcInitialValue
+ 0x0
+
+
+ DoCrc
+ 0
+
+
+ IlinkBE8Slave
+ 1
+
+
+ IlinkBufferedTerminalOutput
+ 1
+
+
+ IlinkStdoutInterfaceSlave
+ 1
+
+
+ CrcFullSize
+ 0
+
+
+ IlinkIElfToolPostProcess
+ 0
+
+
+ IlinkLogAutoLibSelect
+ 0
+
+
+ IlinkLogRedirSymbols
+ 0
+
+
+ IlinkLogUnusedFragments
+ 0
+
+
+ IlinkCrcReverseByteOrder
+ 0
+
+
+ IlinkCrcUseAsInput
+ 1
+
+
+ IlinkOptInline
+ 0
+
+
+ IlinkOptExceptionsAllow
+ 0
+
+
+ IlinkOptExceptionsForce
+ 1
+
+
+ IlinkCmsis
+ 1
+
+
+ IlinkOptMergeDuplSections
+ 0
+
+
+ IlinkOptUseVfe
+ 0
+
+
+ IlinkOptForceVfe
+ 1
+
+
+ IlinkStackAnalysisEnable
+ 0
+
+
+ IlinkStackControlFile
+
+
+ IlinkStackCallGraphFile
+
+
+ CrcAlgorithm
+ 0
+ 1
+
+
+ CrcUnitSize
+ 0
+ 0
+
+
+ IlinkThreadsSlave
+ 1
+
+
+
+
+ IARCHIVE
+ 0
+
+ 0
+ 1
+ 1
+
+ IarchiveInputs
+
+
+ IarchiveOverride
+ 0
+
+
+ IarchiveOutput
+ ###Unitialized###
+
+
+
+
+ BILINK
+ 0
+
+
+
+ Release
+
+ ARM
+
+ 0
+
+ General
+ 3
+
+ 24
+ 1
+ 0
+
+ ExePath
+ Release\Exe
+
+
+ ObjPath
+ Release\Obj
+
+
+ ListPath
+ Release\List
+
+
+ GEndianMode
+ 0
+
+
+ Input variant
+ 3
+ 1
+
+
+ Input description
+ Full formatting.
+
+
+ Output variant
+ 2
+ 1
+
+
+ Output description
+ Full formatting.
+
+
+ GOutputBinary
+ 0
+
+
+ OGCoreOrChip
+ 0
+
+
+ GRuntimeLibSelect
+ 0
+ 1
+
+
+ GRuntimeLibSelectSlave
+ 0
+ 1
+
+
+ RTDescription
+ Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.
+
+
+ OGProductVersion
+ 5.10.0.159
+
+
+ OGLastSavedByProductVersion
+ 7.40.3.8937
+
+
+ GeneralEnableMisra
+ 0
+
+
+ GeneralMisraVerbose
+ 0
+
+
+ OGChipSelectEditMenu
+ Default None
+
+
+ GenLowLevelInterface
+ 0
+
+
+ GEndianModeBE
+ 0
+
+
+ OGBufferedTerminalOutput
+ 0
+
+
+ GenStdoutInterface
+ 0
+
+
+ GeneralMisraRules98
+ 0
+ 1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111
+
+
+ GeneralMisraVer
+ 0
+
+
+ GeneralMisraRules04
+ 0
+ 111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111
+
+
+ RTConfigPath2
+ $TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h
+
+
+ GBECoreSlave
+ 22
+ 0
+
+
+ OGUseCmsis
+ 0
+
+
+ OGUseCmsisDspLib
+ 0
+
+
+ GRuntimeLibThreads
+ 0
+
+
+ CoreVariant
+ 22
+ 0
+
+
+ GFPUDeviceSlave
+ Default None
+
+
+ FPU2
+ 0
+ 0
+
+
+ NrRegs
+ 0
+ 0
+
+
+ NEON
+ 0
+
+
+ GFPUCoreSlave2
+ 22
+ 0
+
+
+
+
+ ICCARM
+ 2
+
+ 31
+ 1
+ 0
+
+ CCOptimizationNoSizeConstraints
+ 0
+
+
+ CCDefines
+ NDEBUG
+
+
+ CCPreprocFile
+ 0
+
+
+ CCPreprocComments
+ 0
+
+
+ CCPreprocLine
+ 0
+
+
+ CCListCFile
+ 0
+
+
+ CCListCMnemonics
+ 0
+
+
+ CCListCMessages
+ 0
+
+
+ CCListAssFile
+ 0
+
+
+ CCListAssSource
+ 0
+
+
+ CCEnableRemarks
+ 0
+
+
+ CCDiagSuppress
+
+
+ CCDiagRemark
+
+
+ CCDiagWarning
+
+
+ CCDiagError
+
+
+ CCObjPrefix
+ 1
+
+
+ CCAllowList
+ 1
+ 11111110
+
+
+ CCDebugInfo
+ 0
+
+
+ IEndianMode
+ 1
+
+
+ IProcessor
+ 1
+
+
+ IExtraOptionsCheck
+ 0
+
+
+ IExtraOptions
+
+
+ CCLangConformance
+ 0
+
+
+ CCSignedPlainChar
+ 1
+
+
+ CCRequirePrototypes
+ 0
+
+
+ CCMultibyteSupport
+ 0
+
+
+ CCDiagWarnAreErr
+ 0
+
+
+ CCCompilerRuntimeInfo
+ 0
+
+
+ IFpuProcessor
+ 1
+
+
+ OutputFile
+ $FILE_BNAME$.o
+
+
+ CCLibConfigHeader
+ 1
+
+
+ PreInclude
+
+
+ CompilerMisraOverride
+ 0
+
+
+ CCIncludePath2
+
+
+ CCStdIncCheck
+ 0
+
+
+ CCCodeSection
+ .text
+
+
+ IInterwork2
+ 1
+
+
+ IProcessorMode2
+ 1
+
+
+ CCOptLevel
+ 3
+
+
+ CCOptStrategy
+ 0
+ 0
+
+
+ CCOptLevelSlave
+ 3
+
+
+ CompilerMisraRules98
+ 0
+ 1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111
+
+
+ CompilerMisraRules04
+ 0
+ 111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111
+
+
+ CCPosIndRopi
+ 0
+
+
+ CCPosIndRwpi
+ 0
+
+
+ CCPosIndNoDynInit
+ 0
+
+
+ IccLang
+ 2
+
+
+ IccCDialect
+ 1
+
+
+ IccAllowVLA
+ 1
+
+
+ IccCppDialect
+ 1
+
+
+ IccExceptions
+ 1
+
+
+ IccRTTI
+ 1
+
+
+ IccStaticDestr
+ 1
+
+
+ IccCppInlineSemantics
+ 0
+
+
+ IccCmsis
+ 1
+
+
+ IccFloatSemantics
+ 0
+
+
+ CCNoLiteralPool
+ 0
+
+
+ CCOptStrategySlave
+ 0
+ 0
+
+
+ CCGuardCalls
+ 1
+
+
+
+
+ AARM
+ 2
+
+ 9
+ 1
+ 0
+
+ AObjPrefix
+ 1
+
+
+ AEndian
+ 1
+
+
+ ACaseSensitivity
+ 1
+
+
+ MacroChars
+ 0
+ 0
+
+
+ AWarnEnable
+ 0
+
+
+ AWarnWhat
+ 0
+
+
+ AWarnOne
+
+
+ AWarnRange1
+
+
+ AWarnRange2
+
+
+ ADebug
+ 0
+
+
+ AltRegisterNames
+ 0
+
+
+ ADefines
+
+
+ AList
+ 0
+
+
+ AListHeader
+ 1
+
+
+ AListing
+ 1
+
+
+ Includes
+ 0
+
+
+ MacDefs
+ 0
+
+
+ MacExps
+ 1
+
+
+ MacExec
+ 0
+
+
+ OnlyAssed
+ 0
+
+
+ MultiLine
+ 0
+
+
+ PageLengthCheck
+ 0
+
+
+ PageLength
+ 80
+
+
+ TabSpacing
+ 8
+
+
+ AXRef
+ 0
+
+
+ AXRefDefines
+ 0
+
+
+ AXRefInternal
+ 0
+
+
+ AXRefDual
+ 0
+
+
+ AProcessor
+ 1
+
+
+ AFpuProcessor
+ 1
+
+
+ AOutputFile
+ $FILE_BNAME$.o
+
+
+ AMultibyteSupport
+ 0
+
+
+ ALimitErrorsCheck
+ 0
+
+
+ ALimitErrorsEdit
+ 100
+
+
+ AIgnoreStdInclude
+ 0
+
+
+ AUserIncludes
+
+
+ AExtraOptionsCheckV2
+ 0
+
+
+ AExtraOptionsV2
+
+
+ AsmNoLiteralPool
+ 0
+
+
+
+
+ OBJCOPY
+ 0
+
+ 1
+ 1
+ 0
+
+ OOCOutputFormat
+ 3
+ 0
+
+
+ OCOutputOverride
+ 0
+
+
+ OOCOutputFile
+ 5.srec
+
+
+ OOCCommandLineProducer
+ 1
+
+
+ OOCObjCopyEnable
+ 0
+
+
+
+
+ CUSTOM
+ 3
+
+ 0
+
+
+
+ BICOMP
+ 0
+
+
+ BUILDACTION
+ 1
+
+
+
+
+ ILINK
+ 0
+
+ 16
+ 1
+ 0
+
+ IlinkOutputFile
+ cpp.out
+
+
+ IlinkLibIOConfig
+ 1
+
+
+ XLinkMisraHandler
+ 0
+
+
+ IlinkInputFileSlave
+ 0
+
+
+ IlinkDebugInfoEnable
+ 1
+
+
+ IlinkKeepSymbols
+
+
+ IlinkRawBinaryFile
+
+
+ IlinkRawBinarySymbol
+
+
+ IlinkRawBinarySegment
+
+
+ IlinkRawBinaryAlign
+
+
+ IlinkDefines
+
+
+ IlinkConfigDefines
+
+
+ IlinkMapFile
+ 0
+
+
+ IlinkLogFile
+ 0
+
+
+ IlinkLogInitialization
+ 0
+
+
+ IlinkLogModule
+ 0
+
+
+ IlinkLogSection
+ 0
+
+
+ IlinkLogVeneer
+ 0
+
+
+ IlinkIcfOverride
+ 0
+
+
+ IlinkIcfFile
+ $TOOLKIT_DIR$\CONFIG\generic.icf
+
+
+ IlinkIcfFileSlave
+
+
+ IlinkEnableRemarks
+ 0
+
+
+ IlinkSuppressDiags
+
+
+ IlinkTreatAsRem
+
+
+ IlinkTreatAsWarn
+
+
+ IlinkTreatAsErr
+
+
+ IlinkWarningsAreErrors
+ 0
+
+
+ IlinkUseExtraOptions
+ 0
+
+
+ IlinkExtraOptions
+
+
+ IlinkLowLevelInterfaceSlave
+ 1
+
+
+ IlinkAutoLibEnable
+ 1
+
+
+ IlinkAdditionalLibs
+
+
+ IlinkOverrideProgramEntryLabel
+ 0
+
+
+ IlinkProgramEntryLabelSelect
+ 0
+
+
+ IlinkProgramEntryLabel
+
+
+ DoFill
+ 0
+
+
+ FillerByte
+ 0xFF
+
+
+ FillerStart
+ 0x0
+
+
+ FillerEnd
+ 0x0
+
+
+ CrcSize
+ 0
+ 1
+
+
+ CrcAlign
+ 1
+
+
+ CrcPoly
+ 0x11021
+
+
+ CrcCompl
+ 0
+ 0
+
+
+ CrcBitOrder
+ 0
+ 0
+
+
+ CrcInitialValue
+ 0x0
+
+
+ DoCrc
+ 0
+
+
+ IlinkBE8Slave
+ 1
+
+
+ IlinkBufferedTerminalOutput
+ 1
+
+
+ IlinkStdoutInterfaceSlave
+ 1
+
+
+ CrcFullSize
+ 0
+
+
+ IlinkIElfToolPostProcess
+ 0
+
+
+ IlinkLogAutoLibSelect
+ 0
+
+
+ IlinkLogRedirSymbols
+ 0
+
+
+ IlinkLogUnusedFragments
+ 0
+
+
+ IlinkCrcReverseByteOrder
+ 0
+
+
+ IlinkCrcUseAsInput
+ 1
+
+
+ IlinkOptInline
+ 1
+
+
+ IlinkOptExceptionsAllow
+ 1
+
+
+ IlinkOptExceptionsForce
+ 0
+
+
+ IlinkCmsis
+ 1
+
+
+ IlinkOptMergeDuplSections
+ 0
+
+
+ IlinkOptUseVfe
+ 1
+
+
+ IlinkOptForceVfe
+ 0
+
+
+ IlinkStackAnalysisEnable
+ 0
+
+
+ IlinkStackControlFile
+
+
+ IlinkStackCallGraphFile
+
+
+ CrcAlgorithm
+ 0
+ 1
+
+
+ CrcUnitSize
+ 0
+ 0
+
+
+ IlinkThreadsSlave
+ 1
+
+
+
+
+ IARCHIVE
+ 0
+
+ 0
+ 1
+ 0
+
+ IarchiveInputs
+
+
+ IarchiveOverride
+ 0
+
+
+ IarchiveOutput
+ ###Unitialized###
+
+
+
+
+ BILINK
+ 0
+
+
+ {{source_files}}
+
+
+
diff --git a/workspace_tools/export/uvision4.py b/workspace_tools/export/uvision4.py
index 241e5068b7f..d3ca7bbe925 100644
--- a/workspace_tools/export/uvision4.py
+++ b/workspace_tools/export/uvision4.py
@@ -57,6 +57,7 @@ class Uvision4(Exporter):
'NUCLEO_F410RB',
'NUCLEO_F411RE',
'NUCLEO_F446RE',
+ 'NUCLEO_F746ZG',
'NUCLEO_L053R8',
'NUCLEO_L073RZ',
'NUCLEO_L152RE',
@@ -119,6 +120,7 @@ class Uvision4(Exporter):
'NUCLEO_F410RB',
'NUCLEO_F411RE',
'NUCLEO_F446RE',
+ 'NUCLEO_F746ZG',
'NUCLEO_L053R8',
'NUCLEO_L073RZ',
'NUCLEO_L152RE',
diff --git a/workspace_tools/export/uvision4_nucleo_f746zg.uvopt.tmpl b/workspace_tools/export/uvision4_nucleo_f746zg.uvopt.tmpl
new file mode 100644
index 00000000000..4df60993acd
--- /dev/null
+++ b/workspace_tools/export/uvision4_nucleo_f746zg.uvopt.tmpl
@@ -0,0 +1,185 @@
+
+
+
+ 1.0
+
+ ### uVision Project, (C) Keil Software
+
+
+ *.c
+ *.s*; *.src; *.a*
+ *.obj
+ *.lib
+ *.txt; *.h; *.inc
+ *.plm
+ *.cpp
+ 0
+
+
+
+ 0
+ 0
+
+
+
+ STM32F746ZG
+ 0x4
+ ARM-ADS
+
+ 8000000
+
+ 1
+ 1
+ 0
+ 1
+ 0
+
+
+ 1
+ 65535
+ 0
+ 0
+ 0
+
+
+ 79
+ 66
+ 8
+ .\build\
+
+
+ 1
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+
+
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+
+
+ 1
+ 0
+ 1
+
+ 18
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+ 11
+ STLink\ST-LINKIII-KEIL_SWO.dll
+
+
+
+ 0
+ UL2CM3
+ UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN2 -FF0STM32F7x_1024 -FS08000000 -FL0100000 -FF1STM32F7x_TCM -FS1200000 -FL1100000 -FP0($$Device:STM32F756IG$Flash\STM32F7x_1024.FLM) -FP1($$Device:STM32F756IG$Flash\STM32F7x_TCM.FLM))
+
+
+ 0
+ ST-LINKIII-KEIL_SWO
+ -U066EFF535651727067055449 -O2254 -S0 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F7x_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F746ZG$CMSIS\Flash\STM32F7x_1024.FLM)
+
+
+
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+ 0
+
+
+
+
+ src
+ 1
+ 0
+ 0
+ 0
+
+ 1
+ 1
+ 1
+ 0
+ 0
+ 0
+ 0
+ main.cpp
+ main.cpp
+ 0
+ 0
+
+
+
+
diff --git a/workspace_tools/export/uvision4_nucleo_f746zg.uvproj.tmpl b/workspace_tools/export/uvision4_nucleo_f746zg.uvproj.tmpl
new file mode 100644
index 00000000000..82dc736b7d0
--- /dev/null
+++ b/workspace_tools/export/uvision4_nucleo_f746zg.uvproj.tmpl
@@ -0,0 +1,446 @@
+
+
+
+ 2.1
+
+ ###This file was automagically generated by mbed.org. For more information, see http://mbed.org/handbook/Exporting-To-Uvision
+
+
+
+ STM32F746ZG
+ 0x4
+ ARM-ADS
+
+
+ STM32F746ZG
+ STMicroelectronics
+ Keil.STM32F7xx_DFP.1.0.0
+ http://www.keil.com/pack
+ IROM(0x08000000-0x080FFFFF) IRAM(0x20000000-0x2004FFFF) CPUTYPE("Cortex-M7") FPU3(SFPU) CLOCK(12000000) ELITTLE
+ $$Device:STM32F756IG$CMSIS\SVD\STM32F7x.svd
+ 0
+ 0
+
+ 0
+ 0
+ 0
+ 0
+ 1
+
+ .\build\
+ {{name}}
+ 1
+ 0
+ 0
+ 1
+ 1
+ .\build\
+ 1
+ 0
+ 0
+
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+
+ 1
+ 0
+ fromelf --bin -o build\{{name}}_STM32F746ZG.bin build\{{name}}.axf
+ 0
+ 0
+ 0
+ 0
+
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 3
+ 0
+
+
+ SARMCM3.DLL
+ -REMAP
+ DCM.DLL
+ -pCM7
+ SARMCM3.DLL
+ TCM.DLL
+ -pCM7
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 16
+
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 1
+
+
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+
+ 0
+ 11
+
+
+
+ STLink\ST-LINKIII-KEIL_SWO.dll
+
+
+
+
+ 1
+ 0
+ 0
+ 1
+ 1
+ 4107
+
+ 1
+ STLink\ST-LINKIII-KEIL_SWO.dll
+ 0
+
+
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+ "Cortex-M7"
+ 0
+ 0
+ 0
+ 1
+ 1
+ 0
+ 0
+ 2
+ 0
+ 0
+ 8
+ 0
+ 0
+ 0
+ 3
+ 3
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x20000000
+ 0x50000
+
+
+ 1
+ 0x8000000
+ 0x100000
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x8000000
+ 0x100000
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x20000000
+ 0x50000
+
+
+ 0
+ 0x0
+ 0x0
+
+
+
+
+ 1
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+ {% for flag in flags %}{{flag}} {% endfor %}
+ {% for s in symbols %} {{s}}, {% endfor %}
+ {% for path in include_paths %} {{path}}; {% endfor %}
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+
+
+
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0x08000000
+ 0x20000000
+ {{scatter_file}}
+
+ {% for file in object_files %}
+ {{file}}
+ {% endfor %}
+ --any_placement=first_fit
+
+
+
+
+
+ {% for group,files in source_files %}
+
+ {{group}}
+
+ {% for file in files %}
+
+ {{file.name}}
+ {{file.type}}
+ {{file.path}}
+ {%if file.type == "1" %}
+
+
+
+
+ --c99
+
+
+
+
+ {% endif %}
+
+ {% endfor %}
+
+
+ {% endfor %}
+
+
+
+
+
diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py
index 1416de03204..4ea869c5844 100755
--- a/workspace_tools/targets.py
+++ b/workspace_tools/targets.py
@@ -760,6 +760,15 @@ def __init__(self):
self.supported_form_factors = ["ARDUINO", "MORPHO"]
self.detect_code = ["0840"]
+class NUCLEO_F746ZG(Target):
+ def __init__(self):
+ Target.__init__(self)
+ self.core = "Cortex-M7F"
+ self.extra_labels = ['STM', 'STM32F7', 'STM32F746', 'STM32F746ZG']
+ self.supported_toolchains = ["ARM", "uARM", "IAR", "GCC_ARM"]
+ self.detect_code = ["0816"]
+ self.progen_target ='nucleo-f746zg'
+
class NUCLEO_L053R8(Target):
def __init__(self):
Target.__init__(self)
@@ -1855,6 +1864,7 @@ def __init__(self):
NUCLEO_F401RE(),
NUCLEO_F410RB(),
NUCLEO_F411RE(),
+ NUCLEO_F746ZG(),
ELMO_F411RE(),
NUCLEO_F446RE(),
NUCLEO_L053R8(),