diff --git a/TFT_eSPI.cpp b/TFT_eSPI.cpp
index 858b375f..67ee7c6c 100644
--- a/TFT_eSPI.cpp
+++ b/TFT_eSPI.cpp
@@ -159,6 +159,10 @@ void TFT_eSPI::init(void)
 #endif
 
   SPI.begin(); // This will set MISO to input
+  
+#ifdef D6_NOT_USED_FOR_MISO
+  pinMode(D6, OUTPUT);
+#endif
 
 #ifndef SUPPORT_TRANSACTIONS
   #ifdef SET_SPI_TO_LSB_FIRST
@@ -203,19 +207,19 @@ void TFT_eSPI::init(void)
   
   // This loads the driver specific initialisation code  <<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVERS TO THE LIST HERE <<<<<<<<<<<<<<<<<<<<<<<
 #if   defined (ILI9341_DRIVER)
-     #include "TFT_Drivers\ILI9341_Init.h"
+     #include "TFT_Drivers/ILI9341_Init.h"
 
 #elif defined (ST7735_DRIVER)
-     #include "TFT_Drivers\ST7735_Init.h"
+     #include "TFT_Drivers/ST7735_Init.h"
 
 #elif defined (ILI9163_DRIVER)
-     #include "TFT_Drivers\ILI9163_Init.h"
+     #include "TFT_Drivers/ILI9163_Init.h"
 
 #elif defined (S6D02A1_DRIVER)
-     #include "TFT_Drivers\S6D02A1_Init.h"
+     #include "TFT_Drivers/S6D02A1_Init.h"
 	 
 #elif defined (RPI_ILI9486_DRIVER)
-     #include "TFT_Drivers\RPI_ILI9486_Init.h"
+     #include "TFT_Drivers/RPI_ILI9486_Init.h"
 #endif
 
   spi_end();
@@ -234,19 +238,19 @@ void TFT_eSPI::setRotation(uint8_t m)
 
     // This loads the driver specific rotation code  <<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVERS TO THE LIST HERE <<<<<<<<<<<<<<<<<<<<<<<
 #if   defined (ILI9341_DRIVER)
-     #include "TFT_Drivers\ILI9341_Rotation.h"
+     #include "TFT_Drivers/ILI9341_Rotation.h"
 
 #elif defined (ST7735_DRIVER)
-     #include "TFT_Drivers\ST7735_Rotation.h"
+     #include "TFT_Drivers/ST7735_Rotation.h"
 
 #elif defined (ILI9163_DRIVER)
-     #include "TFT_Drivers\ILI9163_Rotation.h"
+     #include "TFT_Drivers/ILI9163_Rotation.h"
 
 #elif defined (S6D02A1_DRIVER)
-     #include "TFT_Drivers\S6D02A1_Rotation.h"
+     #include "TFT_Drivers/S6D02A1_Rotation.h"
 
 #elif defined (RPI_ILI9486_DRIVER)
-     #include "TFT_Drivers\RPI_ILI9486_Rotation.h"
+     #include "TFT_Drivers/RPI_ILI9486_Rotation.h"
 
 	 #endif
 
diff --git a/User_Setup.h b/User_Setup.h
index 12e516c5..b1628cc4 100644
--- a/User_Setup.h
+++ b/User_Setup.h
@@ -125,10 +125,16 @@
 
 // ##################################################################################
 //
-// Section 4. Not used section
+// Section 4. Define whether D6 is used for MISO
 //
 // ##################################################################################
 
+// Comment out the #define below to free up pin D6 for uses other than MISO
+// Specifically, this way it can be used for DC / CS
+// May be useful for pin-constrained applications
+// WARNING: this only works if the display is used write-only
+//
+// #define D6_NOT_USED_FOR_MISO
 
 // ##################################################################################
 //
@@ -145,8 +151,8 @@
 // #define SPI_FREQUENCY   5000000
 // #define SPI_FREQUENCY  10000000
 // #define SPI_FREQUENCY  20000000
- #define SPI_FREQUENCY  27000000 // Actually sets it to 26.67MHz = 80/3
-// #define SPI_FREQUENCY  40000000 // Maximum to use SPIFFS
+// #define SPI_FREQUENCY  27000000 // Actually sets it to 26.67MHz = 80/3
+#define SPI_FREQUENCY  40000000 // Maximum to use SPIFFS
 // #define SPI_FREQUENCY  80000000