Installation

With a OneRNG on a raspberry pi with Raspbian

Install rasbian

Follow instructions on Raspberry site

First, put a ssh file in the boot partition to activate ssh in headless mode as stated here

Install common packages and clone project

    ssh pi@<your-raspberry-pi-ip>
    sudo apt-get install git rng-tools python-gnupg at wget
    git clone https://github.com/ChickenRand/RNG.git

Install Nodejs

Nodejs version that comes with recent Raspbian (2018-06-27) is very very old (v4.8.2), so we need to install it manually by picking the Node's ARM v6 build that can be found here.

Note : those instructions come from here and here.

    # We use LTS version of node
    wget https://nodejs.org/dist/latest-v8.x/node-v8.11.3-linux-armv6l.tar.gz
    tar -xzf node-v8.11.3-linux-armv6l.tar.gz
    cd node-v8.11.3-linux-armv6l/
    sudo cp -R * /usr/local/
    sudo ln -s /usr/local/bin/node /usr/bin/node
    sudo ln -s /usr/local/bin/npm /usr/bin/npm

Install OneRNG packages

Get the lastest onerng version and then install it on the raspberry pi as follow

    # On the raspberry pi machine
    wget http://moonbaseotago.com/onerng/onerng_3.6-1_all.deb
    # Then on the raspberry
    sudo dpkg -i onerng_3.6-1_all.deb
    # Edit onerng conf to enable avalanche raw mode
    sudo nano /etc/onerng.conf
    # And change
    # ONERNG_MODE_COMMAND="cmd1" instead of ONERNG_MODE_COMMAND="cmd0"

Setup and launch systemd service

At this step, you can plug in your OneRNG key to the raspberry pi.

Then, install globally the rng application and launch the systemd service.

If everything is OK, the rng service should start directly on startup, this way you have nothing to do and can leave your rasperry pi alone.

    cd RNG/
    sudo npm install -g
    sudo cp rng.service /etc/systemd/system/rng.service
    sudo systemctl enable rng
    sudo systemctl start rng
    sudo systemctl status rng -l