IMR_PSoC6_BMS_V1.3

Updated CAN message IDs, CAN SJW = 2 in device configurator, include .gitignore, and update main printf debug for latest SW release.

IMR_PSoC6_BMS_V1.2

Implemented switch to deactivate software watchdog for debugging
Implemented example code to read from debug UART
Implemented experimental switch to determine slot based on current and coding resistor. With this set, slot CHARGER is detected if current is <0. Otherwise SYSTEM1/2 and NONE are detected normally (see DETECT_SLOT_BASED_ON_CURRENT)
Fixed error where hardware watchdog could not be deactivated with the switch

IMR_PSoC6_BMS_V1.1

Release 1.1
Keeping the debug button S3 on the small controller board pressed during startup now resets the SoH to 100% (e.g. if new set of cells is used)

IMR_PSoC6_BMS_V1.0

Release V1.0