diff --git a/agama/engine/profiles/default/config-agama-test.properties b/agama/engine/profiles/default/config-agama-test.properties
index 64cf8839cdf..fd7e3fdd8fc 100644
--- a/agama/engine/profiles/default/config-agama-test.properties
+++ b/agama/engine/profiles/default/config-agama-test.properties
@@ -1,6 +1,6 @@
 #The URL of your Jans installation
 server=https://jgomer2001-guiding-herring.gluu.info
 
-clientId=1800.5e01b3bb-1f68-4847-b9ba-d5c999a05e33
+clientId=BADA-BADA
 
-custParamName=customParam1
+custParamName=agama_flow
diff --git a/docs/admin/developer/agama/quick-start.md b/docs/admin/developer/agama/quick-start.md
index aa605c361a8..2599f57c874 100644
--- a/docs/admin/developer/agama/quick-start.md
+++ b/docs/admin/developer/agama/quick-start.md
@@ -194,16 +194,16 @@ Finally the flow assets must be uploaded. You can SFTP/SCP or use other means to
 
 This section assumes your [client application](#client-application) is ready, or at least you have made the configurations required so that you can trigger an (OpendId Connect) authentication request.
 
-This usually boils down to create and launch a URL looking like `https://<your-host>/jans-auth/restv1/authorize?acr_values=agama&customParam1=flow-qname&scope=...&response_type=...&redirect_uri=https...&client_id=...&state=...`. You may like to check the [spec](https://openid.net/specs/openid-connect-core-1_0.html) for more details, however, keep in mind that:
+This usually boils down to create and launch a URL looking like `https://<your-host>/jans-auth/restv1/authorize?acr_values=agama&agama_flow=flow-qname&scope=...&response_type=...&redirect_uri=https...&client_id=...&state=...`. You may like to check the [spec](https://openid.net/specs/openid-connect-core-1_0.html) for more details, however, keep in mind that:
 
 - To trigger an Agama flow, the `acr_values` parameter must be equal to `agama`
 
-- The qualified name (identifier) of the flow to trigger is passed using the parameter referenced in property `cust_param_name` of the Agama bridge script. `customParam1` will work in most cases since this is the default value employed by the Jans installer. For the current example `customParam1=test` should be fine
+- The qualified name (identifier) of the flow to trigger is passed using the parameter referenced in property `cust_param_name` of the Agama bridge script. `agama_flow` will work in most cases since this is the default value employed by the Jans installer. For the current example `agama_flow=test` should be fine
 
 !!! Note
     To use a different parameter name ensure to register the given parameter in the [server configuration](../../config-guide/jans-cli/im/im-jans-authorization-server.md) (property `authorizationRequestCustomAllowedParameters`) and update the bridge accordingly
 
-- If the flow to call receives input parameters, their values can be passed in the custom parameter as well. Use a hyphen to separate the flow name and the parameters expressed in JSON object format. For example, if the flow had inputs  `height` and `color`, you can use `test-{"height": 190, "color": "blue"}` for the value of `customParam1`. Ensure to apply proper URL-encoding beforehand. In this case, the actual value would be `test-%7B%22height%22%3A+190%2C+%22color%22%3A+%22blue%22%7D`. If certain inputs are not provided, `null` values will be assigned for them
+- If the flow to call receives input parameters, their values can be passed in the custom parameter as well. Use a hyphen to separate the flow name and the parameters expressed in JSON object format. For example, if the flow had inputs  `height` and `color`, you can use `test-{"height": 190, "color": "blue"}` for the value of `agama_flow`. Ensure to apply proper URL-encoding beforehand. In this case, the actual value would be `test-%7B%22height%22%3A+190%2C+%22color%22%3A+%22blue%22%7D`. If certain inputs are not provided, `null` values will be assigned for them
 
 ### Testing
 
diff --git a/jans-auth-server/server/conf/jans-config.json b/jans-auth-server/server/conf/jans-config.json
index 8a4b64b9ca7..770b0d15d30 100644
--- a/jans-auth-server/server/conf/jans-config.json
+++ b/jans-auth-server/server/conf/jans-config.json
@@ -385,6 +385,10 @@
         {
             "paramName": "customParam5",
             "returnInResponse": true
+        },
+        {
+            "paramName": "agama_flow",
+            "returnInResponse": false
         }
     ],
     "legacyDynamicRegistrationScopeParam": false,
diff --git a/jans-linux-setup/jans_setup/templates/jans-auth/jans-auth-config.json b/jans-linux-setup/jans_setup/templates/jans-auth/jans-auth-config.json
index 5801fafbd60..b1af26481ed 100644
--- a/jans-linux-setup/jans_setup/templates/jans-auth/jans-auth-config.json
+++ b/jans-linux-setup/jans_setup/templates/jans-auth/jans-auth-config.json
@@ -424,6 +424,10 @@
         {
             "paramName": "customParam5",
             "returnInResponse": true
+        },
+        {
+            "paramName": "agama_flow",
+            "returnInResponse": false
         }
     ],
     "legacyDynamicRegistrationScopeParam": false,
diff --git a/jans-linux-setup/jans_setup/templates/scripts.ldif b/jans-linux-setup/jans_setup/templates/scripts.ldif
index 292e06095a9..fa3c8efc5a4 100644
--- a/jans-linux-setup/jans_setup/templates/scripts.ldif
+++ b/jans-linux-setup/jans_setup/templates/scripts.ldif
@@ -537,7 +537,7 @@ objectClass: top
 description: Agama Script
 displayName: agama
 inum: BADA-BADA
-jansConfProperty: {"value1":"cust_param_name","value2":"customParam1","hide":false,"description":""}
+jansConfProperty: {"value1":"cust_param_name","value2":"agama_flow","hide":false,"description":""}
 jansEnabled: false
 jansLevel: 10
 jansModuleProperty: {"value1":"usage_type","value2":"interactive","description":""}