From 8dc12fed7bf600b233001934b50523aee7948e77 Mon Sep 17 00:00:00 2001
From: Neelrhi <30539822+Neelrhi@users.noreply.github.com>
Date: Fri, 10 May 2024 22:15:08 -0400
Subject: [PATCH] Update printer-creality-ender6-2020.cfg

Added in dimensions for the the custom 3D-printed mount.
---
 config/printer-creality-ender6-2020.cfg | 48 ++++++++++++-------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/config/printer-creality-ender6-2020.cfg b/config/printer-creality-ender6-2020.cfg
index b4048cb781a4..6407292979eb 100644
--- a/config/printer-creality-ender6-2020.cfg
+++ b/config/printer-creality-ender6-2020.cfg
@@ -50,32 +50,32 @@ dir_pin: PB5
 enable_pin: !PC3
 microsteps: 16
 rotation_distance: 8
-position_endstop: 0.0                     # disable to use BLTouch
-endstop_pin: ^PA7                         # disable to use BLTouch
-# endstop_pin: probe:z_virtual_endstop    # enable to use BLTouch
-# position_min: -5                        # enable to use BLTouch
+#position_endstop: 0.0                     # disable to use BLTouch
+#endstop_pin: ^PA7                         # disable to use BLTouch
+endstop_pin: probe:z_virtual_endstop    # enable to use BLTouch
+position_min: -5                        # enable to use BLTouch
 position_max: 400
 
-# [safe_z_home]                           # enable for BLTouch
-# home_xy_position: 150.7, 137
-# speed: 100
-# z_hop: 10
-# z_hop_speed: 5
-
-# [bltouch]                               # enable for BLTouch
-# sensor_pin: ^PB1
-# control_pin: PB0
-# x_offset: -20.7
-# y_offset: -7
-# z_offset: 2.4
-# speed: 3.0
-
-# [bed_mesh]                              # enable for BLTouch
-# speed: 100
-# mesh_min: 10, 10
-# mesh_max: 239, 239
-# algorithm: bicubic
-# probe_count: 5, 5
+ [safe_z_home]                           # enable for BLTouch
+ home_xy_position: 150.7, 137
+ speed: 100
+ z_hop: 10
+ z_hop_speed: 5
+
+ [bltouch]                               # enable for BLTouch
+ sensor_pin: ^PB1
+ control_pin: PB0
+ x_offset: -58.1
+ y_offset: -16.4
+ z_offset: 2.4
+ speed: 3.0
+
+ [bed_mesh]                              # enable for BLTouch
+ speed: 100
+ mesh_min: 10, 10
+ mesh_max: 239, 239
+ algorithm: bicubic
+ probe_count: 5, 5
 
 [extruder]
 max_extrude_only_distance: 1000.0