From d0425ea91fc280e8db2eefe48ac3698acf8e32c6 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 12 May 2024 12:27:41 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A5=20Drop=20TMC26X=20support?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MarlinFirmware/Marlin#26770 --- config/default/Configuration_adv.h | 9 +++------ config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 9 +++------ config/examples/3DMatik/XL/Configuration_adv.h | 9 +++------ config/examples/ADIMLab/Gantry v1/Configuration_adv.h | 9 +++------ config/examples/ADIMLab/Gantry v2/Configuration_adv.h | 9 +++------ config/examples/Alfawise/U20-bltouch/Configuration_adv.h | 9 +++------ config/examples/Alfawise/U20/Configuration_adv.h | 9 +++------ config/examples/AliExpress/CL-260/Configuration_adv.h | 9 +++------ config/examples/AliExpress/UM2pExt/Configuration_adv.h | 9 +++------ config/examples/Anet/A2/Configuration_adv.h | 9 +++------ config/examples/Anet/A2plus/Configuration_adv.h | 9 +++------ config/examples/Anet/A6/Configuration_adv.h | 9 +++------ config/examples/Anet/A8/Configuration_adv.h | 9 +++------ config/examples/Anet/A8plus/Configuration_adv.h | 9 +++------ config/examples/Anet/A9/Configuration_adv.h | 9 +++------ config/examples/Anet/E10/Configuration_adv.h | 9 +++------ config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h | 9 +++------ config/examples/Anet/E16/Stock/Configuration_adv.h | 9 +++------ config/examples/Anet/ET4+/Configuration_adv.h | 9 +++------ config/examples/Anet/ET4-Pro/Configuration_adv.h | 9 +++------ config/examples/Anet/ET4/Configuration_adv.h | 9 +++------ config/examples/Anet/ET4X/Configuration_adv.h | 9 +++------ config/examples/Anet/ET5-Pro/Configuration_adv.h | 9 +++------ config/examples/Anet/ET5/Configuration_adv.h | 9 +++------ config/examples/Anet/ET5X/Configuration_adv.h | 9 +++------ config/examples/AnyCubic/Chiron/Configuration_adv.h | 9 +++------ .../Mega Zero 2.0/Anycubic V1/Configuration_adv.h | 9 +++------ .../AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h | 9 +++------ config/examples/AnyCubic/Vyper/Configuration_adv.h | 9 +++------ .../AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h | 9 +++------ .../i3 Mega/Trigorilla Pro STM32/Configuration_adv.h | 9 +++------ config/examples/AnyCubic/i3/Configuration_adv.h | 9 +++------ config/examples/ArmEd/Configuration_adv.h | 9 +++------ config/examples/Artillery/Genius Pro/Configuration_adv.h | 9 +++------ .../Artillery/Genius/BLTouch/Configuration_adv.h | 9 +++------ config/examples/Artillery/Genius/V1/Configuration_adv.h | 9 +++------ config/examples/Artillery/Hornet/Configuration_adv.h | 9 +++------ .../Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h | 9 +++------ .../Artillery/Sidewinder X1/V1/Configuration_adv.h | 9 +++------ .../examples/Artillery/Sidewinder X2/Configuration_adv.h | 9 +++------ config/examples/Azteeg/X5GT/Configuration_adv.h | 9 +++------ config/examples/BIBO/TouchX/cyclops/Configuration_adv.h | 9 +++------ config/examples/BIBO/TouchX/default/Configuration_adv.h | 9 +++------ config/examples/BIQU/B1 SE Plus/Configuration_adv.h | 9 +++------ config/examples/BIQU/B1 SE/Configuration_adv.h | 9 +++------ config/examples/BIQU/B1/Configuration_adv.h | 9 +++------ config/examples/BIQU/BX/Configuration_adv.h | 9 +++------ config/examples/BIQU/Hurakan/Configuration_adv.h | 9 +++------ .../examples/BIQU/Thunder Standard/Configuration_adv.h | 9 +++------ config/examples/BQ/Hephestos/Configuration_adv.h | 9 +++------ config/examples/BQ/Hephestos_2/Configuration_adv.h | 9 +++------ config/examples/BQ/WITBOX/Configuration_adv.h | 9 +++------ config/examples/CNC/miniRambo/Configuration_adv.h | 9 +++------ config/examples/CTC/A13/Configuration_adv.h | 9 +++------ config/examples/CTC/Bizer/Configuration_adv.h | 9 +++------ .../CTC/i3 2560 Rev A/no probe/Configuration_adv.h | 9 +++------ config/examples/Cartesio/Configuration_adv.h | 9 +++------ config/examples/Copymaster3D/300/Configuration_adv.h | 9 +++------ config/examples/Copymaster3D/400/Configuration_adv.h | 9 +++------ config/examples/Copymaster3D/500/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-10 Max/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 9 +++------ .../Creality/CR-10 Mini/CrealityV1/Configuration_adv.h | 9 +++------ .../Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h | 9 +++------ .../Creality/CR-10 S4/CrealityV1/Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 v3/Configuration_adv.h | 9 +++------ .../Creality/CR-10 S5/CrealityV1/Configuration_adv.h | 9 +++------ .../CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h | 9 +++------ .../CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-10 V2/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-10 V3/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 9 +++------ .../Creality/CR-10/CrealityV1/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-10S Pro/Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h | 9 +++------ .../CR-10S/CrealityV1 - BLTouch/Configuration_adv.h | 9 +++------ .../Creality/CR-10S/CrealityV1/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-20 Pro/Configuration_adv.h | 9 +++------ .../CR-20/RepRapWorld Minitronics20/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-20/Stock/Configuration_adv.h | 9 +++------ .../Creality/CR-30 PrintMill/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-6 SE/Configuration_adv.h | 9 +++------ config/examples/Creality/CR-8/Configuration_adv.h | 9 +++------ .../Ender-2 Pro/CrealityV24S4/Configuration_adv.h | 9 +++------ .../Ender-2 Pro/CrealityV423/Configuration_adv.h | 9 +++------ config/examples/Creality/Ender-2/Configuration_adv.h | 9 +++------ .../Creality/Ender-3 Max Neo/Configuration_adv.h | 9 +++------ config/examples/Creality/Ender-3 Max/Configuration_adv.h | 9 +++------ config/examples/Creality/Ender-3 Neo/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR 1.4 Turbo/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 1.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 9 +++------ .../Ender-3 Pro/Creality free-runs/Configuration_adv.h | 9 +++------ .../Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h | 9 +++------ .../Ender-3 Pro/CrealityV422/Configuration_adv.h | 9 +++------ .../CrealityV427 - BLTouch/Configuration_adv.h | 9 +++------ .../Ender-3 Pro/CrealityV427/Configuration_adv.h | 9 +++------ .../Creality/Ender-3 S1 Plus/Configuration_adv.h | 9 +++------ .../examples/Creality/Ender-3 S1 Pro/Configuration_adv.h | 9 +++------ .../Creality/Ender-3 S1/STM32F1/Configuration_adv.h | 9 +++------ .../Creality/Ender-3 S1/STM32F4/Configuration_adv.h | 9 +++------ .../examples/Creality/Ender-3 V2 Neo/Configuration_adv.h | 9 +++------ .../CrealityUI/Configuration_adv.h | 9 +++------ .../MarlinUI/Configuration_adv.h | 9 +++------ .../CrealityUI/Configuration_adv.h | 9 +++------ .../MarlinUI/Configuration_adv.h | 9 +++------ .../CrealityV422/CrealityUI/Configuration_adv.h | 9 +++------ .../Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h | 9 +++------ .../Ender-3/BigTreeTech E3 RRF/Configuration_adv.h | 9 +++------ .../Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h | 9 +++------ .../Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h | 9 +++------ .../2-into-1 Hotend/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h | 9 +++------ .../Single Extruder/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 1.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 9 +++------ .../Ender-3/Creality free-runs/Configuration_adv.h | 9 +++------ .../Creality/Ender-3/CrealityV1/Configuration_adv.h | 9 +++------ .../Creality/Ender-3/CrealityV422/Configuration_adv.h | 9 +++------ .../Creality/Ender-3/CrealityV427/Configuration_adv.h | 9 +++------ .../FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h | 9 +++------ .../Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h | 9 +++------ .../Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h | 9 +++------ .../Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h | 9 +++------ .../Ender-3/FYSETC Cheetah/base/Configuration_adv.h | 9 +++------ .../Creality/Ender-3/MEEB-3DP/Configuration_adv.h | 9 +++------ .../Ender-3/MKS Robin E3/V1.0/Configuration_adv.h | 9 +++------ .../Ender-3/MKS Robin E3/V1.1/Configuration_adv.h | 9 +++------ .../Creality/Ender-3/MKS Robin E3P/Configuration_adv.h | 9 +++------ .../Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h | 9 +++------ config/examples/Creality/Ender-4/Configuration_adv.h | 9 +++------ .../Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h | 9 +++------ .../CrealityV1 (ORIGIN UI)/Configuration_adv.h | 9 +++------ .../CrealityV1 (RELOADED UI)/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR E3 Turbo/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h | 9 +++------ .../Ender-5 Pro/CrealityV422/Configuration_adv.h | 9 +++------ .../Ender-5 Pro/CrealityV427/Configuration_adv.h | 9 +++------ config/examples/Creality/Ender-5 S1/Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../Ender-5/Creality free-runs/Configuration_adv.h | 9 +++------ .../Creality/Ender-5/CrealityV1/Configuration_adv.h | 9 +++------ .../CrealityV427 with BLTouch/Configuration_adv.h | 9 +++------ .../Creality/Ender-5/CrealityV427/Configuration_adv.h | 9 +++------ config/examples/Creality/Ender-6/Configuration_adv.h | 9 +++------ .../examples/Dagoma/Disco Ultimate/Configuration_adv.h | 9 +++------ config/examples/Daycom/3DP-100/Configuration_adv.h | 9 +++------ .../EXP3D/Imprimante multifonction/Configuration_adv.h | 9 +++------ .../examples/EasyThreeD/ET4000PLUS/Configuration_adv.h | 9 +++------ config/examples/Eazao/Zero/Configuration_adv.h | 9 +++------ config/examples/Einstart-S/Configuration_adv.h | 9 +++------ config/examples/Elegoo/Neptune 2/Configuration_adv.h | 9 +++------ config/examples/Eryone/Thinker SE/Configuration_adv.h | 9 +++------ config/examples/Eryone/Thinker V2/Configuration_adv.h | 9 +++------ config/examples/FYSETC/AIO_II/Configuration_adv.h | 9 +++------ config/examples/FYSETC/F6_13/Configuration_adv.h | 9 +++------ config/examples/FYSETC/S6/Configuration_adv.h | 9 +++------ config/examples/Felix/DUAL/Configuration_adv.h | 9 +++------ config/examples/Felix/Single/Configuration_adv.h | 9 +++------ .../examples/FlashForge/Creator 2X/Configuration_adv.h | 9 +++------ .../examples/FlashForge/CreatorPro/Configuration_adv.h | 9 +++------ config/examples/FlyingBear/P902/Configuration_adv.h | 9 +++------ config/examples/FlyingBear/P905H/Configuration_adv.h | 9 +++------ config/examples/FoamCutter/generic/Configuration_adv.h | 9 +++------ config/examples/FoamCutter/rcKeith/Configuration_adv.h | 9 +++------ config/examples/FolgerTech/FT-5 R2/Configuration_adv.h | 9 +++------ config/examples/FolgerTech/i3-2020/Configuration_adv.h | 9 +++------ config/examples/Formbot/Raptor/Configuration_adv.h | 9 +++------ config/examples/Formbot/T_Rex_2+/Configuration_adv.h | 9 +++------ config/examples/Formbot/T_Rex_3/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A10/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A10D/Configuration_adv.h | 9 +++------ .../examples/Geeetech/A10M/Stock LCD/Configuration_adv.h | 9 +++------ .../Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A10PRO/Configuration_adv.h | 9 +++------ .../examples/Geeetech/A10T/Stock LCD/Configuration_adv.h | 9 +++------ .../Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A20/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A20M/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A20T/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A30/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A30M/Configuration_adv.h | 9 +++------ config/examples/Geeetech/A30T/Configuration_adv.h | 9 +++------ config/examples/Geeetech/D200/Configuration_adv.h | 9 +++------ config/examples/Geeetech/Duplicator5/Configuration_adv.h | 9 +++------ config/examples/Geeetech/E180/Configuration_adv.h | 9 +++------ config/examples/Geeetech/GT2560/Configuration_adv.h | 9 +++------ .../Geeetech/I3_Pro_X-GT2560/Configuration_adv.h | 9 +++------ config/examples/Geeetech/M201/Configuration_adv.h | 9 +++------ config/examples/Geeetech/MeCreator2/Configuration_adv.h | 9 +++------ config/examples/Geeetech/Me_creator/Configuration_adv.h | 9 +++------ config/examples/Geeetech/Me_ducer/Configuration_adv.h | 9 +++------ config/examples/Geeetech/PI3A PRO/Configuration_adv.h | 9 +++------ .../Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h | 9 +++------ .../Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h | 9 +++------ .../examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h | 9 +++------ .../examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h | 9 +++------ config/examples/HMS434/Configuration_adv.h | 9 +++------ config/examples/Infitary/i3-M508/Configuration_adv.h | 9 +++------ .../examples/Intamsys/FunmatHT 4988/Configuration_adv.h | 9 +++------ config/examples/JGAurora/A1/Configuration_adv.h | 9 +++------ config/examples/JGAurora/A3/Configuration_adv.h | 9 +++------ config/examples/JGAurora/A5/Configuration_adv.h | 9 +++------ config/examples/JGAurora/A5S/Configuration_adv.h | 9 +++------ config/examples/JGAurora/Magic/Configuration_adv.h | 9 +++------ config/examples/Kingroon/KP3/Configuration_adv.h | 9 +++------ config/examples/Kingroon/KP3S/Configuration_adv.h | 9 +++------ config/examples/Kingroon/KP3S_Pro/Configuration_adv.h | 9 +++------ config/examples/Kingroon/KP5L-DIY/Configuration_adv.h | 9 +++------ config/examples/Labists/ET4/Configuration_adv.h | 9 +++------ config/examples/Longer/LK5/Configuration_adv.h | 9 +++------ config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h | 9 +++------ config/examples/LulzBot/TAZ4/Configuration_adv.h | 9 +++------ config/examples/MBot/Cube/Configuration_adv.h | 9 +++------ config/examples/MakerFarm/Pegasus 12/Configuration_adv.h | 9 +++------ config/examples/MakerParts/Configuration_adv.h | 9 +++------ .../MakerTech3D/Proforge2sDual/Configuration_adv.h | 9 +++------ config/examples/Malyan/M150/Configuration_adv.h | 9 +++------ config/examples/Malyan/M180/Configuration_adv.h | 9 +++------ config/examples/Malyan/M200/Configuration_adv.h | 9 +++------ config/examples/Micromake/C1/basic/Configuration_adv.h | 9 +++------ .../examples/Micromake/C1/enhanced/Configuration_adv.h | 9 +++------ config/examples/Mks/Robin/Configuration_adv.h | 9 +++------ config/examples/Mks/Robin_Lite3/Configuration_adv.h | 9 +++------ config/examples/Mks/Robin_Pro/Configuration_adv.h | 9 +++------ config/examples/Mks/Sbase/Configuration_adv.h | 9 +++------ config/examples/Modix/Big60/Configuration_adv.h | 9 +++------ config/examples/Nextion/Configuration_adv.h | 9 +++------ .../ORD Bot/Hadron/Sanguinololu/Configuration_adv.h | 9 +++------ config/examples/Opulo/Lumen_REV3/Configuration_adv.h | 9 +++------ config/examples/Opulo/Lumen_REV4/Configuration_adv.h | 9 +++------ config/examples/Ortur 4/Configuration_adv.h | 9 +++------ config/examples/Polargraph/Configuration_adv.h | 9 +++------ .../examples/Printrbot/PrintrboardG2/Configuration_adv.h | 9 +++------ .../Printrbot/Simple Metal RevD/Configuration_adv.h | 9 +++------ config/examples/Prusa/MK3/Configuration_adv.h | 9 +++------ .../Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h | 9 +++------ config/examples/Qidi/Qidi 1/Configuration_adv.h | 9 +++------ config/examples/Raiscube/A8r/Configuration_adv.h | 9 +++------ config/examples/RapideLite/RL200/Configuration_adv.h | 9 +++------ config/examples/Renkforce/RF100/Configuration_adv.h | 9 +++------ config/examples/Renkforce/RF100XL/Configuration_adv.h | 9 +++------ config/examples/Renkforce/RF100v2/Configuration_adv.h | 9 +++------ config/examples/RepRapPro/Huxley/Configuration_adv.h | 9 +++------ .../examples/RepRapWorld/Megatronics/Configuration_adv.h | 9 +++------ .../RepRapWorld/Minitronics20/CNC/Configuration_adv.h | 9 +++------ config/examples/RigidBot/Configuration_adv.h | 9 +++------ config/examples/Robo3D/R1+/Configuration_adv.h | 9 +++------ config/examples/Rolohaun/Rook MK1/Configuration_adv.h | 9 +++------ config/examples/SCARA/MP_SCARA/Configuration_adv.h | 9 +++------ config/examples/SCARA/Morgan/Configuration_adv.h | 9 +++------ .../STM32/Black_STM32F407VET6/Configuration_adv.h | 9 +++------ config/examples/STM32/STM32F103RE/Configuration_adv.h | 9 +++------ config/examples/Simax/Mi-M200/Configuration_adv.h | 9 +++------ config/examples/Simulator/Configuration_adv.h | 9 +++------ .../SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 9 +++------ .../examples/Sovol/SV-01/CrealityV22/Configuration_adv.h | 9 +++------ .../Sovol/SV-01/CrealityV221/Configuration_adv.h | 9 +++------ config/examples/Sovol/SV-02/Configuration_adv.h | 9 +++------ config/examples/Sovol/SV-03/Configuration_adv.h | 9 +++------ config/examples/Sovol/SV-05/Configuration_adv.h | 9 +++------ config/examples/Sunlu/S8/Configuration_adv.h | 9 +++------ config/examples/Sunlu/T3/Configuration_adv.h | 9 +++------ config/examples/TPARA/AXEL_TPARA/Configuration_adv.h | 9 +++------ config/examples/Tevo/Michelangelo/Configuration_adv.h | 9 +++------ config/examples/Tevo/Nereus/Configuration_adv.h | 9 +++------ .../Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h | 9 +++------ .../Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h | 9 +++------ .../Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h | 9 +++------ .../Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h | 9 +++------ .../Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h | 9 +++------ config/examples/TinyBoy2/Configuration_adv.h | 9 +++------ .../Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h | 9 +++------ config/examples/Tronxy/X1/Configuration_adv.h | 9 +++------ config/examples/Tronxy/X3A/Configuration_adv.h | 9 +++------ .../X5S-2E/Green Board (Chitu V5)/Configuration_adv.h | 9 +++------ .../X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h | 9 +++------ config/examples/Tronxy/X5S/Configuration_adv.h | 9 +++------ config/examples/Tronxy/X5SA-2E/Configuration_adv.h | 9 +++------ config/examples/Tronxy/X5SA/Configuration_adv.h | 9 +++------ config/examples/Tronxy/XY100/Configuration_adv.h | 9 +++------ config/examples/Tronxy/XY2-Pro/Configuration_adv.h | 9 +++------ config/examples/Turnigy/Fabrikator/Configuration_adv.h | 9 +++------ config/examples/Two Trees/BlueR Plus/Configuration_adv.h | 9 +++------ .../Two Trees/BlueR/BlueR V1/Configuration_adv.h | 9 +++------ .../Two Trees/BlueR/BlueR V2/Configuration_adv.h | 9 +++------ .../Two Trees/BlueR/BlueR V3/Configuration_adv.h | 9 +++------ .../Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h | 9 +++------ .../Sapphire Plus/Sapphire Plus V2/Configuration_adv.h | 9 +++------ .../examples/Two Trees/Sapphire Pro/Configuration_adv.h | 9 +++------ config/examples/UltiMachine/Archim1/Configuration_adv.h | 9 +++------ config/examples/UltiMachine/Archim2/Configuration_adv.h | 9 +++------ .../examples/Ultimaker/Ultimaker 2+/Configuration_adv.h | 9 +++------ .../examples/Ultimaker/Ultimaker 2/Configuration_adv.h | 9 +++------ .../Ultimaker Original (1.5.7)/Configuration_adv.h | 9 +++------ .../Ultimaker Original Plus (2.1.1)/Configuration_adv.h | 9 +++------ .../Ultimaker Original Plus DXU/Configuration_adv.h | 9 +++------ config/examples/VORONDesign/Configuration_adv.h | 9 +++------ .../examples/Velleman/K8200 Upgraded/Configuration_adv.h | 9 +++------ config/examples/Velleman/K8200/Configuration_adv.h | 9 +++------ .../Velleman/K8400/Dual-head/Configuration_adv.h | 9 +++------ .../Velleman/K8400/Single-head/Configuration_adv.h | 9 +++------ .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 9 +++------ config/examples/WASP/PowerWASP/Configuration_adv.h | 9 +++------ config/examples/Wanhao/Duplicator 4S/Configuration_adv.h | 9 +++------ config/examples/Wanhao/Duplicator 6/Configuration_adv.h | 9 +++------ .../Wanhao/Duplicator i3 2.1/Configuration_adv.h | 9 +++------ .../Wanhao/Duplicator i3 Mini/Configuration_adv.h | 9 +++------ .../Wanhao/Duplicator i3 Plus/Configuration_adv.h | 9 +++------ config/examples/Weedo/Tina2/V2/Configuration_adv.h | 9 +++------ config/examples/Weedo/Tina2/V3/Configuration_adv.h | 9 +++------ config/examples/Weistek/wt150/Configuration_adv.h | 9 +++------ config/examples/Zonestar/P802M/Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../Configuration_adv.h | 9 +++------ .../Anycubic/Kossel Linear Plus/Configuration_adv.h | 9 +++------ .../examples/delta/Anycubic/Kossel/Configuration_adv.h | 9 +++------ .../examples/delta/Anycubic/Predator/Configuration_adv.h | 9 +++------ .../delta/Dreammaker/Overlord/Configuration_adv.h | 9 +++------ .../delta/Dreammaker/Overlord_Pro/Configuration_adv.h | 9 +++------ .../examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h | 9 +++------ .../examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h | 9 +++------ config/examples/delta/FLSUN/QQ-S/Configuration_adv.h | 9 +++------ config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h | 9 +++------ .../delta/FLSUN/auto_calibrate/Configuration_adv.h | 9 +++------ config/examples/delta/FLSUN/kossel/Configuration_adv.h | 9 +++------ .../examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 9 +++------ config/examples/delta/Geeetech/G2/Configuration_adv.h | 9 +++------ config/examples/delta/Geeetech/G2Pro/Configuration_adv.h | 9 +++------ config/examples/delta/Geeetech/G2S/Configuration_adv.h | 9 +++------ .../examples/delta/Geeetech/G2SPro/Configuration_adv.h | 9 +++------ .../delta/Geeetech/Rostock 301/Configuration_adv.h | 9 +++------ config/examples/delta/Hatchbox_Alpha/Configuration_adv.h | 9 +++------ config/examples/delta/MKS/SBASE/Configuration_adv.h | 9 +++------ config/examples/delta/Malyan M300/Configuration_adv.h | 9 +++------ .../delta/Tevo Little Monster/Configuration_adv.h | 9 +++------ config/examples/delta/Velleman/K8800/Configuration_adv.h | 9 +++------ config/examples/delta/generic/Configuration_adv.h | 9 +++------ config/examples/delta/kossel_clear/Configuration_adv.h | 9 +++------ config/examples/delta/kossel_mini/Configuration_adv.h | 9 +++------ config/examples/delta/kossel_pro/Configuration_adv.h | 9 +++------ config/examples/delta/kossel_xl/Configuration_adv.h | 9 +++------ config/examples/gCreate/gMax1.5+/Configuration_adv.h | 9 +++------ .../Octopus 8 LINEAR_AXES/Configuration_adv.h | 9 +++------ .../linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h | 9 +++------ config/examples/makibox/Configuration_adv.h | 9 +++------ config/examples/tvrrug/Round2/Configuration_adv.h | 9 +++------ 368 files changed, 1104 insertions(+), 2208 deletions(-) diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 86ab7ed1670..5f5d54dad08 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index b2a89f966ef..d2df320f060 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index ce9710453b5..712f43d3d35 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 3edcae03821..9ef21d1be18 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 41615e8a8a0..3e50bef3f9a 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -2980,15 +2980,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -3002,7 +2999,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3502,7 +3499,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index c4db8e101a7..c5966322570 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index c383c04cbc8..180e104240c 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index e39cde9ac30..02ad0fceb22 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index e39cde9ac30..02ad0fceb22 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 43f56720c0a..1a7205e987a 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 7d229f7fc08..282d0e8f320 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index a82704c562a..665ed31012b 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 53fc1e96da0..393261c789a 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index bce12c274f4..633aa5bc057 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index fdeba99ca5c..d96b67b8ef2 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index a64327138eb..fda0f09e1e1 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 514f03bfc4c..6014e20a2a7 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 514f03bfc4c..6014e20a2a7 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index a31eb578280..cb426899eab 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index a31eb578280..cb426899eab 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 3afff74b93f..237a3733f11 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 3afff74b93f..237a3733f11 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 3afff74b93f..237a3733f11 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index fc1fcc3e037..5e8f7ce0056 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 07316787f72..e335f17129a 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index f5f432bf3e9..ca1fcc2b3be 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 26a72de3b00..4f669651861 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 0253f0a0826..912b60eb0ef 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 9c8d83a7860..999242cf553 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 17431790d03..5269ef98de3 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 2db71390065..ada7ff573c4 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 093556e8235..d640bb1a154 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -2975,15 +2975,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2997,7 +2994,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3497,7 +3494,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index b79e43b42a8..6d8d7e2fb72 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index e461ef8c602..d86119d7315 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 82c779bade2..175cd30ee7a 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index aeb59adc97a..98a97663240 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 0f11b8a7fa8..a25a994b56a 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 82c779bade2..175cd30ee7a 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 58b9b107d3b..ac32c8a6a0c 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 18d376ef5ba..6041c663226 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3ef1e72c1a2..74232c805e7 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2967,15 +2967,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2989,7 +2986,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3489,7 +3486,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 8d2f107a143..ad113ca72af 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index caf2cdbc818..d03867191e7 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 23118f05611..bea03dd83a6 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 342a5d0030f..5f0728373c0 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 1050 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME 350 // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index e2a84786770..3f2ca0b338c 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 47ec6098dad..15eec0a71e8 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 493eab41b9e..be3152391bd 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 287946d4eeb..1103a8fe690 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -2978,15 +2978,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -3000,7 +2997,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3500,7 +3497,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 493eab41b9e..be3152391bd 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/CNC/miniRambo/Configuration_adv.h b/config/examples/CNC/miniRambo/Configuration_adv.h index fc7ddf487ce..c8264ea76d5 100644 --- a/config/examples/CNC/miniRambo/Configuration_adv.h +++ b/config/examples/CNC/miniRambo/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 5a38cf745aa..088f5af52c0 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index aab58530f7c..b781aaac35b 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 9df7cde5f97..c30dc114205 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index 03494c6075d..2d37d59f795 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2b0cb9d424a..36abd2443c2 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 6dbe79917cf..ae0900a59f6 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 73f61a9c03b..f43ae26f051 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 12f0b8bcea7..c6fa2550c4e 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.1 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.1 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3489,7 +3486,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 0b86ffe164f..89e87d8bd13 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 6b4ddebb4f0..8580640496d 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index d9f30f25a98..c6f13608b55 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 0b86ffe164f..89e87d8bd13 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h index d3f54ebb8f6..32936c3bc1c 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h index 1b7e13c2982..37164e81fdc 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h @@ -2973,15 +2973,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2995,7 +2992,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3495,7 +3492,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 67364e0e777..581f0198969 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -2975,15 +2975,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2997,7 +2994,7 @@ #define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3495,7 +3492,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 49fb94097cd..eeca75ba378 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -2977,15 +2977,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2999,7 +2996,7 @@ #define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3497,7 +3494,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 16265bf4635..48730d3d575 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index a7546d46591..7c4cb871eab 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 30e1b078757..366a09870da 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index f165a12b88d..eb68f60bda7 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index de1241b1c8e..f44db7fa46f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.0 // Multiplied x1000 for TMC26X62 + #define X_RSENSE 0.062 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 56f77a6f9d6..c4fdf56b5f7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.0 // Multiplied x1000 for TMC26X62 + #define X_RSENSE 0.062 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 16265bf4635..48730d3d575 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index fc7385135b0..c19610e3564 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index 4e95bc7c88c..99b7a5a9b0b 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index a282b0b365f..27ade510faf 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 2213ed537c1..2d985964b4c 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index e540365ab0f..0a7e16f39b8 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index e540365ab0f..0a7e16f39b8 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 4bea5e6fdac..a9d2d29d5d6 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 27f4dc7c59f..913ff8d94b3 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 02d5f1b826f..8f460c3f7d8 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index e9de51fd0be..f0b2ad9a50a 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 6a291a4acc1..47fa4d6bffe 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 7b2fd23935c..0612c301ec8 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h index 63e7a675d0b..b22c4840481 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 1aa51241533..c771474daa0 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index dbc4337a1b7..1c978581286 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index cc0b7d9fdde..65823e63f4a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 63ce37663d6..4e6f74cfbc3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 63ce37663d6..4e6f74cfbc3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index e94fb1b169c..97567af4169 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 0fce893d908..1f204a699f1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index ce5264eddc6..e516ac31445 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index e676cedc8e3..78ab8e1a4bf 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 3087fe0cd6e..69456629721 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h index 007bcc9730a..da6b76bf299 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 29b583bb22d..2075831c6ec 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 877f39972c8..44ee25a2c07 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 877f39972c8..44ee25a2c07 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 41cd65e480d..e807840f58f 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index ea75a4eee17..66b0d4cb9ac 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index aaf7676ad12..f30fd4b432a 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index e077abc709a..37594a8777c 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index f87a4292122..e7b3737bc76 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index ec844dc79f0..086715bddb4 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 51c45fa6a86..06c3100eab6 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 5e5aa235b47..19ea997b268 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index d54a06a7346..9f3845ad271 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 1ab173f370d..8f9b422ebb0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 260f6311ce4..e9a38efe162 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 1626d973493..2fcbdc12514 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index a83b3c00b09..a89934c6060 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index d87a768e604..4c89880d81f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index a83b3c00b09..a89934c6060 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index cd06b4a643a..4aa47db9653 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 530 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 26e7a9a31dd..7f6f58c275d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 26e7a9a31dd..7f6f58c275d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 1eca583d991..7e55ff67c2e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 007248ae473..5c171fd240d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index ce5264eddc6..e516ac31445 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index e676cedc8e3..78ab8e1a4bf 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 3ee74cbf370..7f8960b6bdb 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 29b583bb22d..2075831c6ec 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 226244d4878..8cd2e0cd010 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 226244d4878..8cd2e0cd010 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 8dce6f23958..9f90e65201a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 226244d4878..8cd2e0cd010 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 226244d4878..8cd2e0cd010 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index af2970f5f5b..529082dfe5c 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.1 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.1 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3489,7 +3486,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index f7f75ff6ec9..a30de44b95e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index ad43335595d..6321b97d718 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index c81cb57d5ea..abc2d628014 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 9d009c72a4c..6bb8a5fcf52 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3490,7 +3487,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 5367e6cb9d4..9cdd47991fa 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 0e67192578d..237c2561877 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index fcdaaa01d41..98404bc87a6 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index f790ca3ddc0..eeb7f0ae7d6 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 1a78fa0d37e..604fe3a6e7c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 3d4486536b6..908f5ff64d9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 4e07dd49813..29bfcc84875 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 4c507cab7f7..cb2acd5a011 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 5e13bb0c796..f17891e6250 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 9e9ca220498..637bc535f69 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 808c164db34..3f0abb5c20c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 2f8ba51c786..d8e2e984e69 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -2974,15 +2974,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2996,7 +2993,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3496,7 +3493,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 1a78fa0d37e..604fe3a6e7c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0b72d190c4f..d35d3d3ff49 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d18693b719b..0059dc5939b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 94536e9bac4..9d58b646e38 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 54c354a9d44..dc6703e2e63 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index 92519fee820..1c7258e430f 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.15 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.15 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 738985e7440..34a26dec19b 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index 30fb84ee521..3e60c0fc03d 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index fffc748e260..30b130df7dc 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index fb7444abf4a..dd39b014a90 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 23f8fda985f..bb3c0754600 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 145ee5254a8..7a0a143bdbe 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index bd6fc7ba360..437e78af1c3 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 5c2d15a1284..61ffd8db9a4 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index 69b18e426ff..98606ecfef2 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 6709ff945ee..8a296e1fb02 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 0f3219156d0..ba7d1a4a14b 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index f29cce0576a..889a0d4d598 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -2976,15 +2976,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2998,7 +2995,7 @@ #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3498,7 +3495,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 8d5836d7c2e..b0d94dd5996 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -2976,15 +2976,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2998,7 +2995,7 @@ #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3498,7 +3495,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index fac677c9cae..8e3f17c02ab 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index f86986df44b..832876a78ce 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 3dfcb1df77c..a34c22c5f5c 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index db8b31a8255..f36e0f33517 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index db8b31a8255..f36e0f33517 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index c51ef3a3fc4..4040a877418 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index f878e9b6154..9013ff1b4e3 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index a87a9963f4e..b2ec30bb2b8 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 86a29035328..67827787ada 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2973,15 +2973,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2995,7 +2992,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3495,7 +3492,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index a16f3bd865e..a706f6e0553 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index a16f3bd865e..a706f6e0553 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 8ff28679182..43480e46838 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 7d5e539d8be..693dac09fec 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index c05f9f6d413..37a0765c9e0 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index c84e622ed60..1dc0fb2e8e5 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 40a1a1f16ce..96770a9eaa8 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -2974,15 +2974,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2996,7 +2993,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3496,7 +3493,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 26627659d0f..2d72c89136a 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 2d2cd2ff889..fa48729f71d 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index c5fac54db15..1a7cc255f3c 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index c5fac54db15..1a7cc255f3c 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 26627659d0f..2d72c89136a 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index c5fac54db15..1a7cc255f3c 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index c5fac54db15..1a7cc255f3c 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 1fdeaf0e738..aee303f0865 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 1fdeaf0e738..aee303f0865 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 1fdeaf0e738..aee303f0865 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 260d7bb67f8..fd4f4c70079 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 260d7bb67f8..fd4f4c70079 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 260d7bb67f8..fd4f4c70079 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index c7af11acd20..33030426f31 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 3dfcb1df77c..a34c22c5f5c 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 260d7bb67f8..fd4f4c70079 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index c7af11acd20..33030426f31 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 29a2e4eef8b..1513382dd31 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 3dfcb1df77c..a34c22c5f5c 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 210203b2a75..fdf3cdcb27e 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index afababc00a6..716ba56aba5 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 26627659d0f..2d72c89136a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 26627659d0f..2d72c89136a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index ca3f65db714..03e9fb578b6 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 19e7449fa33..0a96829e5b9 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 45846225380..c9201810a9a 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 2234ab53ca8..801f064af88 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -2976,15 +2976,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2998,7 +2995,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3498,7 +3495,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index d4bce80126d..d9fb072bcfb 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 5aa4237fd4a..7a08bc848de 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -2976,15 +2976,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2998,7 +2995,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3498,7 +3495,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 8b473ef7338..d7ac92ddd87 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 62d4d71eca6..95bd8c6c81e 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 5696682cd94..a6efbf88f06 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index e53389e87cc..d80a5d18acc 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 514f03bfc4c..6014e20a2a7 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index a136e589c59..a74b62f5178 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 8b48d5b0bcc..52982581f31 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -2974,15 +2974,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2996,7 +2993,7 @@ #define X_CURRENT 980 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 32 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index bdcf658e66b..a49fbda99c8 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 4087c743de1..d27193eca37 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 41e1adcb246..1e2efd9f3c2 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2965,15 +2965,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2987,7 +2984,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3487,7 +3484,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 32fb368eba6..7b88b3d8f63 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 8fbce444e13..01832ccaa6e 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index bc6d477445a..5244f857818 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 4d8ff97308c..b920ae88400 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index fea3df7485b..718af00401a 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 745501db6bf..f53777905db 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 165b906ba01..33006c0fa1c 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 6d683191d3a..049257a8efa 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 2d325aaad0c..b8ebf8d6506 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 79968cf0626..646bb3440d3 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index c2d560d4e6c..3ac21ddb860 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index cf5590f8106..c42ecede605 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 256 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 6ce8e9927d5..45c82e017a9 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 64 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 28e2bda797f..2a766bc4cb6 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index a001bcf7c28..f01753d9a6b 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 430c9018601..dfa35b9a330 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 1.0 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 500 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME 230 // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.22 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.22 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3498,7 +3495,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index d43cce122e9..8ddb61926c5 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 500 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME ((X_CURRENT) / 2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3497,7 +3494,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 1fcbcb12f88..2ccbd05cbab 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 43f56720c0a..1a7205e987a 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 3dfcb1df77c..a34c22c5f5c 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index b8387d0642a..afece2af54b 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index b8387d0642a..afece2af54b 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index b8387d0642a..afece2af54b 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 58adc9be109..4fd04cc49f9 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index a10ddf8790b..ddd75fe2151 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 7a31e7efa25..15f4066acd3 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index c0ba90cdf3c..9c9398dcfe5 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 1200 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME 960 // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index b66493907e1..83faadaa281 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 7c0295875fc..db61f148b34 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index eb11115ea69..d69ccd58e4f 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 3ed7d07af24..f28aa384321 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 0bc05ab018b..533243cf603 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index fe8b7de8fa0..a10019e69fb 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 0ea4dcadccd..f7aa2e51e88 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 9f207f2dd1e..1fe05184349 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 8e49bd64f08..edd314acbd9 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 0bfa4255d42..beb89df7eb7 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index a64a27391ed..a0fe5b2e124 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 5327f0a5f66..588ed27f606 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index ebc362769c1..416e494a847 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 53bcd426a78..4c70d5e0884 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 4bc386361b5..41d58c451eb 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 79d939e18ea..2ce573d4621 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index c1854348960..7308c844bcc 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index fbdaf7250c2..4d3d9b84ad3 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index 31cc8ad2417..4d14942f140 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index c926f923260..53d4f338732 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index b2fba0ea54f..8aa6a7eeda0 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index b2fba0ea54f..8aa6a7eeda0 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index eda28053c5b..5892fd99a59 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index ac82f0c4ee5..e7ad2dfb3ea 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index d71724c0913..a11a602fc7a 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index dd75a94d88a..5f9e19b31cb 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 574af89678d..52d4facde47 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 2bbd508d97c..bddf074eb65 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 2b4b1f344ce..c6d5d8f59f2 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -2974,15 +2974,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2996,7 +2993,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3496,7 +3493,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 7656eb53bd1..b28c8e91798 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -2974,15 +2974,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2996,7 +2993,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3496,7 +3493,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index b7eda4de994..ca324ca9bf6 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index c537c264b32..6b61fee4134 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 15cabc3e0c6..f665722b5e4 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2969,15 +2969,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2991,7 +2988,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 3715031b940..f15f7131756 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 3715031b940..f15f7131756 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 3715031b940..f15f7131756 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 3a1f4a04059..4d3ceb5350c 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -2977,15 +2977,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2999,7 +2996,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3499,7 +3496,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index b3277a93f0c..0f389d60751 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -2977,15 +2977,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2999,7 +2996,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3499,7 +3496,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index c6deca916ca..afa78ec9c7b 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index e85f9ce8f0e..4a761ebadcc 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c051167982f..ae15fcd4672 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index 28591269bc7..9053e03c532 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 24c06ad484d..62162854b6b 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 714ca3e2e3b..4db41baf54e 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 3d322b9c6f4..8efaff899b8 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index f5f9bf06675..58d7570e5fc 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -2968,15 +2968,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2990,7 +2987,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3490,7 +3487,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 637bd070e0f..1387d4a2d2f 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 44039a71008..5ecc4366bd6 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -2983,15 +2983,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -3005,7 +3002,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3505,7 +3502,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 2a307ad4225..2ce131575f2 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -2983,15 +2983,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -3005,7 +3002,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3505,7 +3502,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 7ec620d0d6e..60c30607f79 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 7ec620d0d6e..60c30607f79 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 64c5a03c155..bbf3aa0ac8d 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 0216f20807b..0dbef81b9f5 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index de902bae9e8..ae987192177 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index b542ef51414..edff3109fc5 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index bd8459cd4bb..474c3d58545 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 0a7bbe5dfad..7e0bf497e30 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 2e70f8a02bf..f25d1108709 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 2e70f8a02bf..f25d1108709 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index a5f541f1186..a74a28bb181 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 5c56e916624..cfcc18177cd 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 2b7050d6c92..7d70f40b329 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 187fb35f73e..4215df722bd 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 2e0aa42a6eb..15e5f8c5b3f 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 43d780a9064..c625ff0a17c 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index f7225b714a1..7be5cc8072f 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2973,15 +2973,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2995,7 +2992,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3495,7 +3492,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index d5e694397e9..1a04dad353f 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index d5e694397e9..1a04dad353f 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index c6ace721f5c..404280537cd 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3491,7 +3488,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index ceccce1f2ec..4fd2a967343 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 556c261f2d7..812a7a9c42e 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 900 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 88e512572ff..da9a82ef7ca 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 88e512572ff..da9a82ef7ca 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index ab420fc8ad8..105b4df3e31 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 36f9f80e9ea..84ca691821d 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 36f9f80e9ea..84ca691821d 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 36f9f80e9ea..84ca691821d 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 36f9f80e9ea..84ca691821d 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index f816feffe04..8704a9102b4 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index e46a189c4c9..c22851e3444 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index e8a4500f496..0ca773b353c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 15c1ab51daa..0cde108e131 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index f89ba458914..6e15cef91bb 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index d8f078f5e1a..75f20e6d597 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -2972,15 +2972,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2994,7 +2991,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3494,7 +3491,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index ab420fc8ad8..105b4df3e31 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index eb1cf0f39d1..f965b2683cd 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index 0a7dcf213af..61a73c8b090 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index c1da67987b7..8d2b68ae0d9 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2971,15 +2971,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2993,7 +2990,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3493,7 +3490,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 7a5d4a8ab26..95e5f17277d 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index ffad421a211..b11cbc6d313 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 3833add0c97..4eb4cd7efb7 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index b87b4590c17..e5788b7ae33 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index c1e88e8c324..3e544fb39ce 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2970,15 +2970,12 @@ * Some boards have simple jumper connections! See your board's documentation. * - These drivers can also be used with Hardware Serial. * - * The TMC26XStepper library is required for TMC26X stepper drivers. - * https://github.com/MarlinFirmware/TMC26XStepper - * * The TMCStepper library is required for other TMC stepper drivers. * https://github.com/teemuatlut/TMCStepper * * @section tmc/config */ -#if HAS_TRINAMIC_CONFIG || HAS_TMC26X +#if HAS_TRINAMIC_CONFIG #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -2992,7 +2989,7 @@ #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X + #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis @@ -3492,7 +3489,7 @@ */ #define TMC_ADV() { } -#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X +#endif // HAS_TRINAMIC_CONFIG // @section i2cbus