diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
index 25223155d61c..89f1a4ab2ab4 100644
--- a/Marlin/src/lcd/language/language_cz.h
+++ b/Marlin/src/lcd/language/language_cz.h
@@ -129,7 +129,6 @@ namespace LanguageNarrow_cz {
 
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Provádím G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL nástroje");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Unified Bed Leveling");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Vyrovnání bodu");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Manuální síť bodů");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Vložte kartu, změřte");
diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h
index e9202718ce08..037beb2b3caa 100644
--- a/Marlin/src/lcd/language/language_de.h
+++ b/Marlin/src/lcd/language/language_de.h
@@ -176,7 +176,6 @@ namespace LanguageNarrow_de {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2. Düse @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("G29 ausführen");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL-Werkzeuge");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Unified Bed Leveling");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Berührungspunkt");
   LSTR MSG_UBL_TILT_MESH                  = _UxGT("Tilt Mesh");
   LSTR MSG_UBL_TILTING_GRID               = _UxGT("Tilting Grid Size");
@@ -288,9 +287,9 @@ namespace LanguageNarrow_de {
   LSTR MSG_MOVE_E                         = _UxGT("Bewege Extruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Bewege Extruder *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Hotend zu kalt");
-  LSTR MSG_MOVE_N_MM                      = _UxGT(" $ mm");
-  LSTR MSG_MOVE_N_IN                      = _UxGT(" $ in");
-  LSTR MSG_MOVE_N_DEG                     = _UxGT(" $ ") LCD_STR_DEGREE;
+  LSTR MSG_MOVE_N_MM                      = _UxGT("Bewege $mm");
+  LSTR MSG_MOVE_N_IN                      = _UxGT("Bewege $in");
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("Bewege $") LCD_STR_DEGREE;
   LSTR MSG_SPEED                          = _UxGT("Geschw.");
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("Bett Z");
   LSTR MSG_NOZZLE                         = _UxGT("Düse");
diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h
index ea9d4f43e7fb..428cfce23e5e 100644
--- a/Marlin/src/lcd/language/language_el.h
+++ b/Marlin/src/lcd/language/language_el.h
@@ -96,6 +96,8 @@ namespace LanguageNarrow_el {
   LSTR MSG_MOVE_E                         = _UxGT("Εξωθητής");
   LSTR MSG_MOVE_EN                        = _UxGT("Εξωθητής *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Μετακίνηση $μμ");
+  LSTR MSG_MOVE_N_IN                      = _UxGT("Μετακίνηση $in");
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("Μετακίνηση $") LCD_STR_DEGREE;
   LSTR MSG_SPEED                          = _UxGT("Ταχύτητα");
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("Επ. Εκτύπωσης Z");
   LSTR MSG_NOZZLE                         = _UxGT("Ακροφύσιο");
diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h
index b8d0ceccf8a3..af8274b483f5 100644
--- a/Marlin/src/lcd/language/language_el_gr.h
+++ b/Marlin/src/lcd/language/language_el_gr.h
@@ -85,6 +85,8 @@ namespace LanguageNarrow_el_gr {
   LSTR MSG_MOVE_E                         = _UxGT("Εξωθητήρας");
   LSTR MSG_MOVE_EN                        = _UxGT("Εξωθητήρας *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Μετακίνηση $μμ");
+  LSTR MSG_MOVE_N_IN                      = _UxGT("Μετακίνηση $in");
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("Μετακίνηση $") LCD_STR_DEGREE;
   LSTR MSG_SPEED                          = _UxGT("Ταχύτητα");
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("Κλίνη Z");
   LSTR MSG_NOZZLE                         = _UxGT("Ακροφύσιο");
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index d049630555c3..ad49906dd023 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -203,7 +203,6 @@ namespace LanguageNarrow_en {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2nd Nozzle @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Doing G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL Tools");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Unified Bed Leveling");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Tilting Point");
   LSTR MSG_UBL_TILT_MESH                  = _UxGT("Tilt Mesh");
   LSTR MSG_UBL_TILTING_GRID               = _UxGT("Tilting Grid Size");
@@ -316,9 +315,9 @@ namespace LanguageNarrow_en {
   LSTR MSG_MOVE_E                         = _UxGT("Move Extruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Move *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Hotend too cold");
-  LSTR MSG_MOVE_N_MM                      = _UxGT("Move $ mm");
-  LSTR MSG_MOVE_N_IN                      = _UxGT("Move $ in");
-  LSTR MSG_MOVE_N_DEG                     = _UxGT("Move $ ") LCD_STR_DEGREE;
+  LSTR MSG_MOVE_N_MM                      = _UxGT("Move $mm");
+  LSTR MSG_MOVE_N_IN                      = _UxGT("Move $in");
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("Move $") LCD_STR_DEGREE;
   LSTR MSG_LIVE_MOVE                      = _UxGT("Live Move");
   LSTR MSG_SPEED                          = _UxGT("Speed");
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("Bed Z");
diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
index 34555b5443c3..5bee09b2428b 100644
--- a/Marlin/src/lcd/language/language_es.h
+++ b/Marlin/src/lcd/language/language_es.h
@@ -127,7 +127,6 @@ namespace LanguageNarrow_es {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2ª Fusor @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Hacer G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Herramientas UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Nivelado UBL");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Punto de inclinación");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Crear Mallado man.");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Colocar cuña y Medir");
diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h
index b9edbd45bdb7..1c2cf8fb8643 100644
--- a/Marlin/src/lcd/language/language_eu.h
+++ b/Marlin/src/lcd/language/language_eu.h
@@ -87,7 +87,6 @@ namespace LanguageNarrow_eu {
 
   LSTR MSG_UBL_DOING_G29                  = _UxGT("G29 exekutatzen");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL Tresnak");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Unified Bed Leveling");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Sarea eskuz sortu");
   LSTR MSG_UBL_BC_INSERT2                 = _UxGT("Neurtu");
   LSTR MSG_UBL_ACTIVATE_MESH              = _UxGT("UBL aktibatu");
diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h
index ff81614b156c..0ac8f71d5874 100644
--- a/Marlin/src/lcd/language/language_fr.h
+++ b/Marlin/src/lcd/language/language_fr.h
@@ -139,7 +139,6 @@ namespace LanguageNarrow_fr {
   LSTR MSG_G26_LEAVING                    = _UxGT("Sortie G26");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("G29 en cours");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Outils UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Niveau lit unifié");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Maillage manuel");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Poser câle & mesurer");
   LSTR MSG_UBL_BC_INSERT2                 = _UxGT("Mesure");
diff --git a/Marlin/src/lcd/language/language_fr_na.h b/Marlin/src/lcd/language/language_fr_na.h
index d2d165dd3863..55737555030a 100644
--- a/Marlin/src/lcd/language/language_fr_na.h
+++ b/Marlin/src/lcd/language/language_fr_na.h
@@ -139,7 +139,6 @@ namespace LanguageNarrow_fr_na {
   LSTR MSG_G26_LEAVING                    = _UxGT("Sortie G26");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("G29 en cours");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Outils UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Niveau lit unifie");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Maillage manuel");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Poser cale & mesurer");
   LSTR MSG_UBL_BC_INSERT2                 = _UxGT("Mesure");
diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
index b647eabb8884..ebcf384c5caf 100644
--- a/Marlin/src/lcd/language/language_gl.h
+++ b/Marlin/src/lcd/language/language_gl.h
@@ -124,7 +124,6 @@ namespace LanguageNarrow_gl {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2º Bico @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Executando G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Ferramentas UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Unified Bed Leveling");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Punto de inclinación");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Facer Malla Manual");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Colocar Calzo e Medir");
diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h
index 771b3b66ff4c..9153df718677 100644
--- a/Marlin/src/lcd/language/language_hu.h
+++ b/Marlin/src/lcd/language/language_hu.h
@@ -154,7 +154,6 @@ namespace LanguageNarrow_hu {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2. fej @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Szintezz! G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL eszköz");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Egységes ágy szint");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Döntési pont");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Kézi háló építés");
   LSTR MSG_UBL_MESH_WIZARD                = _UxGT("UBL Háló varázsló");
diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h
index 35bc50d0d203..a1c0dda9d9c0 100644
--- a/Marlin/src/lcd/language/language_it.h
+++ b/Marlin/src/lcd/language/language_it.h
@@ -196,7 +196,6 @@ namespace LanguageNarrow_it {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2° ugello @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("G29 in corso");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Strumenti UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Livel.letto unificato");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Punto inclinaz.");
   LSTR MSG_UBL_TILT_MESH                  = _UxGT("Inclina Mesh");
   LSTR MSG_UBL_TILTING_GRID               = _UxGT("Dim.griglia inclin.");
diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h
index 53f62b5bb338..2cb9aa2288ae 100644
--- a/Marlin/src/lcd/language/language_pl.h
+++ b/Marlin/src/lcd/language/language_pl.h
@@ -239,9 +239,9 @@ namespace LanguageNarrow_pl {
   LSTR MSG_MOVE_E                         = _UxGT("Ekstruzja (os E)");
   LSTR MSG_MOVE_EN                        = _UxGT("Ekstruzja (os E) *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Dysza za zimna");
-  LSTR MSG_MOVE_N_MM                      = _UxGT("Przesuń co $ mm");
-  LSTR MSG_MOVE_N_IN                      = _UxGT("Przesuń co $ in");
-  LSTR MSG_MOVE_N_DEG                     = _UxGT("Przesuń co $ ") LCD_STR_DEGREE;
+  LSTR MSG_MOVE_N_MM                      = _UxGT("Przesuń co $mm");
+  LSTR MSG_MOVE_N_IN                      = _UxGT("Przesuń co $in");
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("Przesuń co $") LCD_STR_DEGREE;
   LSTR MSG_SPEED                          = _UxGT("Predkość");
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("Stół Z");
   LSTR MSG_NOZZLE                         = _UxGT("Dysza");
diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h
index 58b592fd9036..17c6ada02604 100644
--- a/Marlin/src/lcd/language/language_pt_br.h
+++ b/Marlin/src/lcd/language/language_pt_br.h
@@ -114,7 +114,6 @@ namespace LanguageNarrow_pt_br {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2o bico @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Executando G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Ferramentas UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Nivel. Mesa Unif.");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Fazer malha manual");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Calçar e calibrar");
   LSTR MSG_UBL_BC_INSERT2                 = _UxGT("Medir");
diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h
index e7f60dce9bed..81f44fe65ada 100644
--- a/Marlin/src/lcd/language/language_ro.h
+++ b/Marlin/src/lcd/language/language_ro.h
@@ -123,7 +123,6 @@ namespace LanguageNarrow_ro {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2nd Nozzle @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Doing G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL Tools");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Unified Bed Leveling");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Tilting Point");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Manually Build Mesh");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Place Shim & Measure");
diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h
index a16d38a85235..ffe2fb1ae5c7 100644
--- a/Marlin/src/lcd/language/language_ru.h
+++ b/Marlin/src/lcd/language/language_ru.h
@@ -157,7 +157,6 @@ namespace LanguageNarrow_ru {
 
   LSTR MSG_UBL_DOING_G29                    = _UxGT("Выполняем G29");
   LSTR MSG_UBL_TOOLS                        = _UxGT("Инструменты UBL");
-  LSTR MSG_UBL_LEVEL_BED                    = _UxGT("Настройка UBL");
   LSTR MSG_LCD_TILTING_MESH                 = _UxGT("Точка разворота");
   LSTR MSG_UBL_MANUAL_MESH                  = _UxGT("Ручной ввод сетки");
   LSTR MSG_UBL_BC_INSERT                    = _UxGT("Разм.шайбу, измерить");
diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h
index f27e20d83462..73bf58d99110 100644
--- a/Marlin/src/lcd/language/language_sk.h
+++ b/Marlin/src/lcd/language/language_sk.h
@@ -192,7 +192,6 @@ namespace LanguageNarrow_sk {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2. tryska @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Vykonávam G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("Nástroje UBL");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("UBL rovnanie");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Vyrovnávam bod");
   LSTR MSG_UBL_TILT_MESH                  = _UxGT("Nakloniť sieť");
   LSTR MSG_UBL_TILTING_GRID               = _UxGT("Veľkosť nakl. siete");
diff --git a/Marlin/src/lcd/language/language_sv.h b/Marlin/src/lcd/language/language_sv.h
index 9a4e712dcd77..4023d135217d 100644
--- a/Marlin/src/lcd/language/language_sv.h
+++ b/Marlin/src/lcd/language/language_sv.h
@@ -146,7 +146,6 @@ namespace LanguageNarrow_sv {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2:a Munstycke @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Utför G29");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL Verktyg");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("Enad Bädd Nivellering (UBL)");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Lutningspunkt");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("Manuellt skapa nät");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("Placera Shim & Mät");
diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h
index bc130bf37541..c3c3b76cec99 100644
--- a/Marlin/src/lcd/language/language_tr.h
+++ b/Marlin/src/lcd/language/language_tr.h
@@ -179,7 +179,6 @@ namespace LanguageNarrow_tr {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2. nozul @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("G29 Çalışıyor");
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL Araçları");
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("UBL Tabla Seviyeleme");
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("Eğim Noktası");
   LSTR MSG_UBL_TILT_MESH                  = _UxGT("Eğimli Mesh");
   LSTR MSG_UBL_TILTING_GRID               = _UxGT("Eğimli Izgara Boyutu");
@@ -345,7 +344,6 @@ namespace LanguageNarrow_tr {
   LSTR MSG_SENSOR_RESPONSIVENESS_E        = _UxGT("Sensör çözünürlüğü *");
   LSTR MSG_MPC_AMBIENT_XFER_COEFF_E       = _UxGT("Ortam h *");
   LSTR MSG_MPC_AMBIENT_XFER_COEFF_FAN_E   = _UxGT("Amb. h fan *");
-  LSTR MSG_SELECT                         = _UxGT("Seç");
   LSTR MSG_SELECT_E                       = _UxGT("Seç *");
   LSTR MSG_ACC                            = _UxGT("İvme");
   LSTR MSG_JERK                           = _UxGT("Sarsma");
diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h
index d06171643c79..cc20c8955f24 100644
--- a/Marlin/src/lcd/language/language_uk.h
+++ b/Marlin/src/lcd/language/language_uk.h
@@ -155,7 +155,6 @@ namespace LanguageNarrow_uk {
 
   LSTR MSG_UBL_DOING_G29                    = _UxGT("Виконується G29");
   LSTR MSG_UBL_TOOLS                        = _UxGT("Інструменти UBL");
-  LSTR MSG_UBL_LEVEL_BED                    = _UxGT("Налаштування UBL");
   LSTR MSG_LCD_TILTING_MESH                 = _UxGT("Точка нахилу");
   LSTR MSG_UBL_MANUAL_MESH                  = _UxGT("Ручне введ. сітки");
   LSTR MSG_UBL_BC_INSERT                    = _UxGT("Розм. шайбу і вимір.");
diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h
index e445413efe80..c952416ec8cb 100644
--- a/Marlin/src/lcd/language/language_vi.h
+++ b/Marlin/src/lcd/language/language_vi.h
@@ -98,7 +98,6 @@ namespace LanguageNarrow_vi {
   LSTR MSG_CUSTOM_COMMANDS                = _UxGT("Các lệnh tự chọn");                     // Custom Commands
   LSTR MSG_UBL_DOING_G29                  = _UxGT("Đang chạy G29");                        // Doing G29
   LSTR MSG_UBL_TOOLS                      = _UxGT("Công cụ UBL");                          // UBL tools
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("San Lấp Bàn Thống Nhất (UBL)");         // Unified Bed Leveling
   LSTR MSG_IDEX_MENU                      = _UxGT("chế độ IDEX");                          // IDEX Mode
   LSTR MSG_IDEX_MODE_AUTOPARK             = _UxGT("Đậu tự động");                          // Auto-Park
   LSTR MSG_IDEX_MODE_DUPLICATE            = _UxGT("Sự gấp đôi");                           // Duplication
diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index d86e2c43e050..75d81f2c9a13 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -37,14 +37,17 @@ namespace LanguageNarrow_zh_CN {
   LSTR MSG_MARLIN                         = _UxGT("马林");
   LSTR MSG_YES                            = _UxGT("是");
   LSTR MSG_NO                             = _UxGT("否");
+  LSTR MSG_HIGH                           = _UxGT("高");
+  LSTR MSG_LOW                            = _UxGT("低");
   LSTR MSG_BACK                           = _UxGT("返回"); // ”Back“
-  LSTR MSG_MEDIA_ABORTING                 = _UxGT("放弃中...");
+  LSTR MSG_ERROR                          = _UxGT("错误");
+  LSTR MSG_MEDIA_ABORTING                 = _UxGT("存储卡中止...");
   LSTR MSG_MEDIA_INSERTED                 = _UxGT("存储卡已插入"); // "Card inserted"
   LSTR MSG_MEDIA_REMOVED                  = _UxGT("存储卡被拔出"); // "Card removed"
   LSTR MSG_MEDIA_WAITING                  = _UxGT("等待存储器");
-  LSTR MSG_MEDIA_READ_ERROR               = _UxGT("存储器读取错误");
+  LSTR MSG_MEDIA_READ_ERROR               = _UxGT("卡读卡器错误");
   LSTR MSG_MEDIA_USB_REMOVED              = _UxGT("USB设备已弹出");
-  LSTR MSG_MEDIA_USB_FAILED               = _UxGT("USB启动错误");
+  LSTR MSG_MEDIA_USB_FAILED               = _UxGT("USB读取失败");
   LSTR MSG_KILL_SUBCALL_OVERFLOW          = _UxGT("子响应溢出");
   LSTR MSG_LCD_ENDSTOPS                   = _UxGT("挡块"); // "Endstops" // Max length 8 characters
   LSTR MSG_LCD_SOFT_ENDSTOPS              = _UxGT("软挡块");
@@ -112,6 +115,7 @@ namespace LanguageNarrow_zh_CN {
   LSTR MSG_CUSTOM_COMMANDS                = _UxGT("定制命令"); // "Custom Commands"
   LSTR MSG_M48_TEST                       = _UxGT("M48探测");
   LSTR MSG_M48_POINT                      = _UxGT("M48点");
+  LSTR MSG_M48_OUT_OF_BOUNDS              = _UxGT("探针测试越界");
   LSTR MSG_M48_DEVIATION                  = _UxGT("M48偏差");
   LSTR MSG_IDEX_MENU                      = _UxGT("IDEX模式");
   LSTR MSG_OFFSETS_MENU                   = _UxGT("工具偏移量");
@@ -123,9 +127,12 @@ namespace LanguageNarrow_zh_CN {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("第二喷头是@");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("执行G29"); // "Doing G29"
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL工具"); // "UBL Tools"
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling"
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("倾斜點");
+  LSTR MSG_UBL_TILT_MESH                  = _UxGT("倾斜网格");
+  LSTR MSG_UBL_TILTING_GRID               = _UxGT("倾斜网格尺寸");
+  LSTR MSG_UBL_MESH_TILTED                = _UxGT("网格倾斜");
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("手工创设网格"); // "Manually Build Mesh"
+  LSTR MSG_UBL_MESH_WIZARD                = _UxGT("网格精灵(UBL)");
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("放置垫片并测量"); // "Place shim & measure"
   LSTR MSG_UBL_BC_INSERT2                 = _UxGT("测量"); // "Measure"
   LSTR MSG_UBL_BC_REMOVE                  = _UxGT("移除并测量热床"); // "Remove & measure bed"
@@ -180,8 +187,10 @@ namespace LanguageNarrow_zh_CN {
   LSTR MSG_UBL_STORAGE_SLOT               = _UxGT("存储槽"); // "Memory Slot"
   LSTR MSG_UBL_LOAD_MESH                  = _UxGT("装载热床网格"); // "Load Bed Mesh"
   LSTR MSG_UBL_SAVE_MESH                  = _UxGT("保存热床网格"); // "Save Bed Mesh"
+  LSTR MSG_UBL_INVALID_SLOT               = _UxGT("首先选择一个网格槽");
   LSTR MSG_MESH_LOADED                    = _UxGT("网格 %i 已装载"); // "Mesh %i loaded"
   LSTR MSG_MESH_SAVED                     = _UxGT("网格 %i 已保存"); // "Mesh %i saved"
+  LSTR MSG_MESH_ACTIVE                    = _UxGT("网格 %i 激活");
   LSTR MSG_UBL_NO_STORAGE                 = _UxGT("没有存储"); // "No storage"
   LSTR MSG_UBL_SAVE_ERROR                 = _UxGT("错误: UBL保存"); // "Err: UBL Save"
   LSTR MSG_UBL_RESTORE_ERROR              = _UxGT("错误: UBL还原"); // "Err: UBL Restore"
@@ -224,7 +233,9 @@ namespace LanguageNarrow_zh_CN {
   LSTR MSG_MOVE_E                         = _UxGT("挤出机"); // "Extruder"
   LSTR MSG_MOVE_EN                        = _UxGT("挤出机 *"); // "Extruder"
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("热端太冷");
-  LSTR MSG_MOVE_N_MM                      = _UxGT("移动 $ mm"); // "Move 0.025mm"
+  LSTR MSG_MOVE_N_MM                      = _UxGT("移动 $mm"); // "Move $mm"
+  LSTR MSG_MOVE_N_IN                      = _UxGT("移动 $in"); // "Move $in"
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("移动 $") LCD_STR_DEGREE; // "Move $°"
   LSTR MSG_SPEED                          = _UxGT("速率"); // "Speed"
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("热床Z"); // "Bed Z"
   LSTR MSG_NOZZLE                         = _UxGT("喷嘴"); // "Nozzle" 噴嘴
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
index df2a31b3fedb..e47704da7efa 100644
--- a/Marlin/src/lcd/language/language_zh_TW.h
+++ b/Marlin/src/lcd/language/language_zh_TW.h
@@ -119,7 +119,6 @@ namespace LanguageNarrow_zh_TW {
   LSTR MSG_HOTEND_OFFSET_A                = _UxGT("2nd Nozzle @");
   LSTR MSG_UBL_DOING_G29                  = _UxGT("執行G29"); // "Doing G29"
   LSTR MSG_UBL_TOOLS                      = _UxGT("UBL工具"); // "UBL Tools"
-  LSTR MSG_UBL_LEVEL_BED                  = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling"
   LSTR MSG_LCD_TILTING_MESH               = _UxGT("傾斜點"); // "Tilting Point"
   LSTR MSG_UBL_MANUAL_MESH                = _UxGT("手工建網"); // "Manually Build Mesh"
   LSTR MSG_UBL_BC_INSERT                  = _UxGT("放置墊片並測量"); // "Place shim & measure"
@@ -220,9 +219,9 @@ namespace LanguageNarrow_zh_TW {
   LSTR MSG_MOVE_E                         = _UxGT("擠出機"); // "Extruder"
   LSTR MSG_MOVE_EN                        = _UxGT("擠出機 *"); // "Extruder *"
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("噴嘴溫度不夠"); // "Hotend too cold"
-  LSTR MSG_MOVE_N_MM                      = _UxGT("移動 $ mm"); // "Move $mm"
-  LSTR MSG_MOVE_N_IN                      = _UxGT("移動 $ in"); // "Move $in"
-  LSTR MSG_MOVE_N_DEG                     = _UxGT("移動 $ ") LCD_STR_DEGREE; // "Move $°"
+  LSTR MSG_MOVE_N_MM                      = _UxGT("移動 $mm"); // "Move $mm"
+  LSTR MSG_MOVE_N_IN                      = _UxGT("移動 $in"); // "Move $in"
+  LSTR MSG_MOVE_N_DEG                     = _UxGT("移動 $") LCD_STR_DEGREE; // "Move $°"
   LSTR MSG_SPEED                          = _UxGT("速率"); // "Speed"
   LSTR MSG_MESH_Z_OFFSET                  = _UxGT("熱床Z"); // "Bed Z"
   LSTR MSG_NOZZLE                         = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴"); // "Nozzle" 噴嘴
diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp
index 4aea30d998ec..35adf1211f04 100644
--- a/Marlin/src/lcd/menu/menu_motion.cpp
+++ b/Marlin/src/lcd/menu/menu_motion.cpp
@@ -495,7 +495,7 @@ void menu_motion() {
   //
   #if ENABLED(AUTO_BED_LEVELING_UBL)
 
-    SUBMENU(MSG_UBL_LEVEL_BED, _lcd_ubl_level_bed);
+    SUBMENU(MSG_UBL_LEVELING, _lcd_ubl_level_bed);
 
   #elif ENABLED(LCD_BED_LEVELING)
 
diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp
index c8fd33d26df0..dc2e1761adbc 100644
--- a/Marlin/src/lcd/menu/menu_ubl.cpp
+++ b/Marlin/src/lcd/menu/menu_ubl.cpp
@@ -361,7 +361,7 @@ void _lcd_ubl_save_mesh_cmd() { _lcd_ubl_load_save_cmd('S', GET_TEXT_F(MSG_MESH_
 void _lcd_ubl_storage_mesh() {
   int16_t a = settings.calc_num_meshes();
   START_MENU();
-  BACK_ITEM(MSG_UBL_LEVEL_BED);
+  BACK_ITEM(MSG_UBL_LEVELING);
   if (!WITHIN(ubl_storage_slot, 0, a - 1))
     STATIC_ITEM(MSG_UBL_NO_STORAGE);
   else {
@@ -517,7 +517,7 @@ void _ubl_goto_map_screen() {
  */
 void _lcd_ubl_output_map() {
   START_MENU();
-  BACK_ITEM(MSG_UBL_LEVEL_BED);
+  BACK_ITEM(MSG_UBL_LEVELING);
   GCODES_ITEM(MSG_UBL_OUTPUT_MAP_HOST, F("G29T0"));
   GCODES_ITEM(MSG_UBL_OUTPUT_MAP_CSV, F("G29T1"));
   GCODES_ITEM(MSG_UBL_OUTPUT_MAP_BACKUP, F("G29S-1"));
@@ -535,7 +535,7 @@ void _lcd_ubl_output_map() {
  */
 void _menu_ubl_tools() {
   START_MENU();
-  BACK_ITEM(MSG_UBL_LEVEL_BED);
+  BACK_ITEM(MSG_UBL_LEVELING);
   SUBMENU(MSG_UBL_BUILD_MESH_MENU, _lcd_ubl_build_mesh);
   GCODES_ITEM(MSG_UBL_MANUAL_MESH, F("G29I999\nG29P2BT0"));
   #if ENABLED(G26_MESH_VALIDATION)
@@ -562,7 +562,7 @@ void _menu_ubl_tools() {
    */
   void _lcd_ubl_step_by_step() {
     START_MENU();
-    BACK_ITEM(MSG_UBL_LEVEL_BED);
+    BACK_ITEM(MSG_UBL_LEVELING);
     GCODES_ITEM(MSG_UBL_1_BUILD_COLD_MESH, F("G29NP1"));
     GCODES_ITEM(MSG_UBL_2_SMART_FILLIN, F("G29P3T0"));
     SUBMENU(MSG_UBL_3_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh);
@@ -596,7 +596,7 @@ void _menu_ubl_tools() {
   void _menu_ubl_mesh_wizard() {
     const int16_t total_slots = settings.calc_num_meshes();
     START_MENU();
-    BACK_ITEM(MSG_UBL_LEVEL_BED);
+    BACK_ITEM(MSG_UBL_LEVELING);
 
     #if HAS_HOTEND
       EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, HEATER_0_MINTEMP + 20, thermalManager.hotend_max_target(0));