diff --git a/Marlin/src/HAL/STM32/tft/tft_spi.cpp b/Marlin/src/HAL/STM32/tft/tft_spi.cpp index cca247e20d6b..cda2eb28e304 100644 --- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp @@ -31,6 +31,10 @@ #include "tft_spi.h" #include "pinconfig.h" +//#define DEBUG_TFT_IO +#define DEBUG_OUT ENABLED(DEBUG_TFT_IO) +#include "../../../core/debug_out.h" + SPI_HandleTypeDef TFT_SPI::SPIx; DMA_HandleTypeDef TFT_SPI::DMAtx; @@ -43,8 +47,9 @@ void TFT_SPI::init() { if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK)) == NP) return; if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return; - #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN - if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return; + #if PIN_EXISTS(TFT_MISO) + // Check these pins in code because they are sometimes defined as analog pin references + if ((TFT_MISO_PIN != TFT_MOSI_PIN) && (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO))) return; #endif SPIx.Instance = spiInstance; @@ -76,10 +81,13 @@ void TFT_SPI::init() { pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK); pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI); - #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN - pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO); + #if PIN_EXISTS(TFT_MISO) + // Check these pins in code because they are sometimes defined as analog pin references + if (TFT_MISO_PIN != TFT_MOSI_PIN) pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO); #endif + //pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN); + #ifdef SPI1_BASE if (SPIx.Instance == SPI1) { __HAL_RCC_SPI1_CLK_ENABLE(); @@ -151,29 +159,47 @@ void TFT_SPI::dataTransferBegin(uint16_t dataSize) { WRITE(TFT_CS_PIN, LOW); } -#ifdef TFT_DEFAULT_DRIVER - #include "../../../lcd/tft_io/tft_ids.h" -#endif +#include "../../../lcd/tft_io/tft_ids.h" uint32_t TFT_SPI::getID() { - uint32_t id; - id = readID(LCD_READ_ID); + DEBUG_ECHOLNPGM("TFT_SPI::getID()"); + + uint32_t id = readID(LCD_READ_ID); + #if ENABLED(DEBUG_TFT_IO) + char debug_register[3], debug_value[5]; + sprintf_P(debug_register, PSTR("%02X"), LCD_READ_ID); + sprintf_P(debug_value, PSTR("%04X"), uint16_t(id)); + DEBUG_ECHOLNPGM(" readID(0x", debug_register, ") : 0x", debug_value); + #endif + if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF) { id = readID(LCD_READ_ID4); - #ifdef TFT_DEFAULT_DRIVER - if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF) - id = TFT_DEFAULT_DRIVER; + #if ENABLED(DEBUG_TFT_IO) + sprintf_P(debug_register, PSTR("%02X"), LCD_READ_ID4); + sprintf_P(debug_value, PSTR("%04X"), uint16_t(id)); + DEBUG_ECHOLNPGM(" readID(0x", debug_register, ") : 0x", debug_value); #endif - } + } + + #ifdef TFT_DEFAULT_DRIVER + if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF) { + id = TFT_DEFAULT_DRIVER; + #if ENABLED(DEBUG_TFT_IO) + sprintf_P(debug_value, PSTR("%04X"), uint16_t(id)); + DEBUG_ECHOLNPGM(" Fallback to TFT_DEFAULT_DRIVER : 0x", debug_value); + #endif + } + #endif + return id; } uint32_t TFT_SPI::readID(const uint16_t inReg) { uint32_t data = 0; #if PIN_EXISTS(TFT_MISO) - const uint32_t oldPrescaler = SPIx.Init.BaudRatePrescaler; - + uint32_t BaudRatePrescaler = SPIx.Init.BaudRatePrescaler; SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64; + dataTransferBegin(DATASIZE_8BIT); writeReg(inReg); @@ -185,10 +211,8 @@ uint32_t TFT_SPI::readID(const uint16_t inReg) { __HAL_SPI_ENABLE(&SPIx); SET_BIT(SPIx.Instance->CR1, SPI_CR1_CSTART); - #if TFT_MISO_PIN != TFT_MOSI_PIN - SPIx.Instance->TXDR = 0; - #endif - while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_EOT)) {} + if (SPIx.Init.Direction == SPI_DIRECTION_2LINES) SPIx.Instance->TXDR = 0; + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_EOT)) { /* nada */ } data = (data << 8) | SPIx.Instance->RXDR; __HAL_SPI_DISABLE(&SPIx); __HAL_SPI_CLEAR_EOTFLAG(&SPIx); @@ -197,19 +221,22 @@ uint32_t TFT_SPI::readID(const uint16_t inReg) { #else __HAL_SPI_ENABLE(&SPIx); for (uint32_t i = 0; i < 4; i++) { - #if TFT_MISO_PIN != TFT_MOSI_PIN - while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) {} + if (SPIx.Init.Direction == SPI_DIRECTION_2LINES) { + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) { /* nada */ } SPIx.Instance->DR = 0; - #endif - while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_RXNE)) {} + } + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_RXNE)) { /* nada */ } data = (data << 8) | SPIx.Instance->DR; } #endif dataTransferEnd(); - SPIx.Init.BaudRatePrescaler = oldPrescaler; + #if DISABLED(DEBUG_TFT_IO) + SPIx.Init.BaudRatePrescaler = BaudRatePrescaler; + #endif #endif + DEBUG_ECHOLNPGM(" raw data : ", data); return data >> 7; } @@ -238,13 +265,13 @@ bool TFT_SPI::isBusy() { // Check if SPI data transfer is completed if (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_EOT)) return true; #else - // Check if SPI is idle - if (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) return true; + // Check if SPI transmit butter is empty and SPI is idle + if ((!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) || (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY))) return true; #endif } abort(); - return false; + return true; } void TFT_SPI::abort() { @@ -263,9 +290,7 @@ void TFT_SPI::abort() { } void TFT_SPI::transmit(uint16_t data) { - #if TFT_MISO_PIN == TFT_MOSI_PIN - SPI_1LINE_TX(&SPIx); - #endif + if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_TX(&SPIx); #ifdef STM32H7xx MODIFY_REG(SPIx.Instance->CR2, SPI_CR2_TSIZE, 1); @@ -274,30 +299,26 @@ void TFT_SPI::transmit(uint16_t data) { SPIx.Instance->TXDR = data; - while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT)) {} + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT)) { /* nada */ } __HAL_SPI_CLEAR_EOTFLAG(&SPIx); __HAL_SPI_CLEAR_TXTFFLAG(&SPIx); + __HAL_SPI_DISABLE(&SPIx); #else __HAL_SPI_ENABLE(&SPIx); SPIx.Instance->DR = data; - while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) {} + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) { /* nada */ } // Wait for data transfer to actually start + while ( __HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) { /* nada */ } // Wait until SPI is idle #endif - __HAL_SPI_DISABLE(&SPIx); - - #if TFT_MISO_PIN != TFT_MOSI_PIN - __HAL_SPI_CLEAR_OVRFLAG(&SPIx); // Clear overrun flag in 2 Lines communication mode because received data is not read - #endif + if (SPIx.Init.Direction == SPI_DIRECTION_2LINES) __HAL_SPI_CLEAR_OVRFLAG(&SPIx); // Clear overrun flag in 2 Lines communication mode because received data is not read } void TFT_SPI::transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t count) { DMAtx.Init.MemInc = memoryIncrease; HAL_DMA_Init(&DMAtx); - #if TFT_MISO_PIN == TFT_MOSI_PIN - SPI_1LINE_TX(&SPIx); - #endif + if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_TX(&SPIx); dataTransferBegin(); @@ -316,7 +337,7 @@ void TFT_SPI::transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t coun SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); // Enable Tx DMA Request #endif - TERN_(TFT_SHARED_IO, while (isBusy())); + TERN_(TFT_SHARED_IO, while (isBusy()) { /* nada */ }); } void TFT_SPI::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count) { @@ -324,9 +345,10 @@ void TFT_SPI::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count) HAL_DMA_PollForTransfer(&DMAtx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY); #ifdef STM32H7xx - while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT)) {} + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT)) { /* nada */ } #else - while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) {} + while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) { /* nada */ } + while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) { /* nada */ } #endif abort(); } @@ -337,8 +359,7 @@ void TFT_SPI::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count) DMAtx.Init.MemInc = memoryIncrease; HAL_DMA_Init(&DMAtx); - if (TFT_MISO_PIN == TFT_MOSI_PIN) - SPI_1LINE_TX(&SPIx); + if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_TX(&SPIx); dataTransferBegin(); diff --git a/Marlin/src/lcd/extui/mks_ui/SPI_TFT.cpp b/Marlin/src/lcd/extui/mks_ui/SPI_TFT.cpp index 6cbe13e9fddb..236ff3f615ed 100644 --- a/Marlin/src/lcd/extui/mks_ui/SPI_TFT.cpp +++ b/Marlin/src/lcd/extui/mks_ui/SPI_TFT.cpp @@ -63,9 +63,7 @@ void TFT::lcdInit() { #if PIN_EXISTS(TFT_BACKLIGHT) OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH); #endif - #if HAS_LOGO_IN_FLASH - delay(2000); - #endif + TERN_(HAS_LOGO_IN_FLASH, delay(2000)); } void TFT::lcdClear(uint16_t color) { diff --git a/Marlin/src/lcd/tft/tft_string.cpp b/Marlin/src/lcd/tft/tft_string.cpp index 9b4ab3e0843c..ad1a53c4556f 100644 --- a/Marlin/src/lcd/tft/tft_string.cpp +++ b/Marlin/src/lcd/tft/tft_string.cpp @@ -58,7 +58,7 @@ void TFT_String::set_font(const uint8_t *font) { for (glyph = 0; glyph < EXTRA_GLYPHS; glyph++) glyphs_extra[glyph] = nullptr; #endif - DEBUG_ECHOLNPGM("Format: ", ((unifont_t *)font_header)->format); + DEBUG_ECHOLNPGM("format: ", ((unifont_t *)font_header)->format); DEBUG_ECHOLNPGM("capitalAHeight: ", ((unifont_t *)font_header)->capitalAHeight); DEBUG_ECHOLNPGM("fontStartEncoding: ", ((unifont_t *)font_header)->fontStartEncoding); DEBUG_ECHOLNPGM("fontEndEncoding: ", ((unifont_t *)font_header)->fontEndEncoding); diff --git a/Marlin/src/lcd/tft_io/tft_io.cpp b/Marlin/src/lcd/tft_io/tft_io.cpp index d46c2de418fb..893ba617eb37 100644 --- a/Marlin/src/lcd/tft_io/tft_io.cpp +++ b/Marlin/src/lcd/tft_io/tft_io.cpp @@ -111,37 +111,37 @@ void TFT_IO::initTFT() { switch (lcd_id) { case LTDC_RGB: break; - case ST7796: // ST7796S 480x320 - DEBUG_ECHO_MSG(" ST7796S"); + case ST7796: + DEBUG_ECHO_MSG(" ST7796S"); // 480x320 write_esc_sequence(st7796s_init); break; - case ST7789: // ST7789V 320x240 - DEBUG_ECHO_MSG(" ST7789V"); + case ST7789: + DEBUG_ECHO_MSG(" ST7789V"); // 320x240 write_esc_sequence(st7789v_init); break; - case SSD1963: // SSD1963 + case SSD1963: DEBUG_ECHO_MSG(" SSD1963"); write_esc_sequence(ssd1963_init); break; - case ST7735: // ST7735 160x128 - DEBUG_ECHO_MSG(" ST7735"); + case ST7735: + DEBUG_ECHO_MSG(" ST7735"); // 160x128 write_esc_sequence(st7735_init); break; - case R61505: // R61505U 320x240 - DEBUG_ECHO_MSG(" R61505U"); + case R61505: + DEBUG_ECHO_MSG(" R61505U"); // 320x240 write_esc_sequence(r61505_init); break; - case ILI9328: // ILI9328 320x240 - DEBUG_ECHO_MSG(" ILI9328"); + case ILI9328: + DEBUG_ECHO_MSG(" ILI9328"); // 320x240 write_esc_sequence(ili9328_init); break; - case ILI9341: // ILI9341 320x240 - DEBUG_ECHO_MSG(" ILI9341"); + case ILI9341: + DEBUG_ECHO_MSG(" ILI9341"); // 320x240 write_esc_sequence(ili9341_init); break; - case ILI9488: // ILI9488 480x320 - case ILI9488_ID1: // 0x8066 ILI9488 480x320 - DEBUG_ECHO_MSG(" ILI9488"); + case ILI9488: + case ILI9488_ID1: + DEBUG_ECHO_MSG(" ILI9488"); // 480x320 write_esc_sequence(ili9488_init); break; default: diff --git a/Marlin/src/lcd/tft_io/tft_io.h b/Marlin/src/lcd/tft_io/tft_io.h index 98ce7407260c..efbd79b7c1f3 100644 --- a/Marlin/src/lcd/tft_io/tft_io.h +++ b/Marlin/src/lcd/tft_io/tft_io.h @@ -38,7 +38,7 @@ #endif #ifndef TFT_DRIVER - #define TFT_DRIVER AUTO + #define TFT_DRIVER AUTO #endif #define ESC_REG(x) 0xFFFF, 0x00FF & (uint16_t)x