From 73bb491eb780d25ed6f9c0db763aa3b48468512d Mon Sep 17 00:00:00 2001
From: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date: Sat, 30 Nov 2024 11:38:18 -0800
Subject: [PATCH] Format MONSTER8 pins

---
 Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h
index fefc8dccdbcc..422374ac80b0 100644
--- a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h
+++ b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h
@@ -44,13 +44,13 @@
 #define I2C_EEPROM                                // Need use jumpers set i2c for EEPROM
 #define MARLIN_EEPROM_SIZE                0x1000  // 4K
 
-#if ENALBED(CAN_MASTER) // Onboard I2C EEPROM is disconnected by enabling CAN bus jumpers
-// NOTE: 2 Patchwires are required to reconnect the I2C EEPROM
-//  #define I2C_SCL_PIN                       PA8   // 3Dtouch servo control pin
-//  #define I2C_SDA_PIN                       PC9   // SPI3_CS TFT Card chip select pin
+#if ENALBED(CAN_MASTER)                           // Onboard I2C EEPROM is disconnected by enabling CAN bus jumpers
+// NOTE: 2 Patch wires are required to reconnect the I2C EEPROM
+//#define I2C_SCL_PIN                       PA8   // BLTouch servo control pin
+//#define I2C_SDA_PIN                       PC9   // SPI3_CS TFT Card chip select pin
 #else
-  #define I2C_SCL_PIN                         PB8   // I2C_SCL to CAN_RX
-  #define I2C_SDA_PIN                         PB9   // I2C_SDA to CAN_TX
+  #define I2C_SCL_PIN                       PB8   // I2C_SCL to CAN_RX
+  #define I2C_SDA_PIN                       PB9   // I2C_SDA to CAN_TX
 #endif
 
 //