diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index 4ae4c19922d9..aa0cfe52f768 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -1095,7 +1095,7 @@ void MarlinSettings::postprocess() {
     {
       _FIELD_TEST(bedPID);
       #if ENABLED(PIDTEMPBED)
-        const PID_t &pid = thermalManager.temp_bed.pid;
+        const auto &pid = thermalManager.temp_bed.pid;
         const raw_pid_t bed_pid = { pid.p(), pid.i(), pid.d() };
       #else
         const raw_pid_t bed_pid = { NAN, NAN, NAN };
@@ -1109,7 +1109,7 @@ void MarlinSettings::postprocess() {
     {
       _FIELD_TEST(chamberPID);
       #if ENABLED(PIDTEMPCHAMBER)
-        const PID_t &pid = thermalManager.temp_chamber.pid;
+        const auto &pid = thermalManager.temp_chamber.pid;
         const raw_pid_t chamber_pid = { pid.p(), pid.i(), pid.d() };
       #else
         const raw_pid_t chamber_pid = { NAN, NAN, NAN };
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index fb3953841b7c..b88f19a86bcf 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -534,10 +534,6 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
 
 volatile bool Temperature::raw_temps_ready = false;
 
-#if ENABLED(PID_EXTRUSION_SCALING)
-  int32_t Temperature::pes_e_position, Temperature::lpq[LPQ_MAX_LEN];
-  lpq_ptr_t Temperature::lpq_ptr = 0;
-#endif
 
 #if ENABLED(MPCTEMP)
   int32_t Temperature::mpc_e_position; // = 0
@@ -1338,50 +1334,33 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
 
 #if HAS_PID_HEATING
 
-  template<typename TT, int MIN_POW, int MAX_POW>
+  template<typename TT>
   class PIDRunner {
   public:
     TT &tempinfo;
-    __typeof__(TT::pid) work_pid{0};
-    float temp_iState = 0, temp_dState = 0;
-    bool pid_reset = true;
 
     PIDRunner(TT &t) : tempinfo(t) { }
 
-    float get_pid_output() {
-
+    float get_pid_output(const uint8_t extr=0) {
       #if ENABLED(PID_OPENLOOP)
 
         return constrain(tempinfo.target, 0, MAX_POW);
 
       #else // !PID_OPENLOOP
 
-        const float pid_error = tempinfo.target - tempinfo.celsius;
-        if (!tempinfo.target || pid_error < -(PID_FUNCTIONAL_RANGE)) {
-          pid_reset = true;
-          return 0;
-        }
-        else if (pid_error > PID_FUNCTIONAL_RANGE) {
-          pid_reset = true;
-          return MAX_POW;
-        }
+        float out = tempinfo.pid.get_pid_output(tempinfo.target, tempinfo.celsius);
 
-        if (pid_reset) {
-          pid_reset = false;
-          temp_iState = 0.0;
-          work_pid.Kd = 0.0;
-        }
-
-        const float max_power_over_i_gain = float(MAX_POW) / tempinfo.pid.Ki - float(MIN_POW);
-        temp_iState = constrain(temp_iState + pid_error, 0, max_power_over_i_gain);
-
-        work_pid.Kp = tempinfo.pid.Kp * pid_error;
-        work_pid.Ki = tempinfo.pid.Ki * temp_iState;
-        work_pid.Kd = work_pid.Kd + PID_K2 * (tempinfo.pid.Kd * (temp_dState - tempinfo.celsius) - work_pid.Kd);
+        #if ENABLED(PID_FAN_SCALING)
+          out += tempinfo.pid.get_fan_scale_output(thermalManager.fan_speed[extr]);
+        #endif
 
-        temp_dState = tempinfo.celsius;
+        #if ENABLED(PID_EXTRUSION_SCALING)
+          out += tempinfo.pid.get_extrusion_scale_output(
+            extr == active_extruder, stepper.position(E_AXIS), planner.mm_per_step[E_AXIS], thermalManager.lpq_len
+          );
+        #endif
 
-        return constrain(work_pid.Kp + work_pid.Ki + work_pid.Kd + float(MIN_POW), 0, MAX_POW);
+        return constrain(out, tempinfo.pid.low(), tempinfo.pid.high());
 
       #endif // !PID_OPENLOOP
     }
@@ -1395,7 +1374,8 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
           STR_PID_DEBUG_INPUT, c,
           STR_PID_DEBUG_OUTPUT, pid_out
           #if DISABLED(PID_OPENLOOP)
-            , " pTerm ", work_pid.Kp, " iTerm ", work_pid.Ki, " dTerm ", work_pid.Kd
+            , " pTerm ", tempinfo.pid.pTerm(), " iTerm ", tempinfo.pid.iTerm(), " dTerm ", tempinfo.pid.dTerm()
+            , " cTerm ", tempinfo.pid.cTerm(), " fTerm ", tempinfo.pid.fTerm()
           #endif
         );
       }
@@ -1413,14 +1393,14 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
 
     #if ENABLED(PIDTEMP)
 
-      typedef PIDRunner<hotend_info_t, 0, PID_MAX> PIDRunnerHotend;
+      typedef PIDRunner<hotend_info_t> PIDRunnerHotend;
 
       static PIDRunnerHotend hotend_pid[HOTENDS] = {
         #define _HOTENDPID(E) temp_hotend[E],
         REPEAT(HOTENDS, _HOTENDPID)
       };
 
-      const float pid_output = is_idling ? 0 : hotend_pid[ee].get_pid_output();
+      const float pid_output = is_idling ? 0 : hotend_pid[ee].get_pid_output(ee);
 
       #if ENABLED(PID_DEBUG)
         if (ee == active_extruder)
@@ -1521,7 +1501,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
 #if ENABLED(PIDTEMPBED)
 
   float Temperature::get_pid_output_bed() {
-    static PIDRunner<bed_info_t, MIN_BED_POWER, MAX_BED_POWER> bed_pid(temp_bed);
+    static PIDRunner<bed_info_t> bed_pid(temp_bed);
     const float pid_output = bed_pid.get_pid_output();
     TERN_(PID_BED_DEBUG, bed_pid.debug(temp_bed.celsius, pid_output, F("(Bed)")));
     return pid_output;
@@ -1532,7 +1512,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
 #if ENABLED(PIDTEMPCHAMBER)
 
   float Temperature::get_pid_output_chamber() {
-    static PIDRunner<chamber_info_t, MIN_CHAMBER_POWER, MAX_CHAMBER_POWER> chamber_pid(temp_chamber);
+    static PIDRunner<chamber_info_t> chamber_pid(temp_chamber);
     const float pid_output = chamber_pid.get_pid_output();
     TERN_(PID_CHAMBER_DEBUG, chamber_pid.debug(temp_chamber.celsius, pid_output, F("(Chamber)")));
     return pid_output;
@@ -2471,9 +2451,6 @@ void Temperature::init() {
 
   TERN_(PROBING_HEATERS_OFF, paused_for_probing = false);
 
-  #if BOTH(PIDTEMP, PID_EXTRUSION_SCALING)
-    pes_e_position = 0;
-  #endif
 
   // Init (and disable) SPI thermocouples
   #if TEMP_SENSOR_IS_ANY_MAX_TC(0) && PIN_EXISTS(TEMP_0_CS)
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index d0f7d2dda774..c40a418428bc 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -159,94 +159,216 @@ typedef struct { float p, i, d, c, f; } raw_pidcf_t;
   #define scalePID_d(d)   ( float(d) / PID_dT )
   #define unscalePID_d(d) ( float(d) * PID_dT )
 
-  typedef struct {
-    float Kp, Ki, Kd;
+  /// @brief The default PID class, only has Kp, Ki, Kd, other classes extend this one
+  /// @tparam MIN_POW output when current is above target by functional_range
+  /// @tparam MAX_POW output when current is below target by functional_range
+  /// @details This class has methods for Kc and Kf terms, but returns constant default values
+  /// PID classes that implement these features are expected to override these methods
+  /// Since the finally used PID class is typedef-d, there is no need to use virtual functions
+  template<int MIN_POW, int MAX_POW>
+  struct PID_t{
+  protected:
+    bool pid_reset = true;
+    float temp_iState = 0.0f, temp_dState = 0.0f;
+    float work_p = 0, work_i = 0, work_d = 0;
+
+  public:
+    float Kp = 0, Ki = 0, Kd = 0;
     float p() const { return Kp; }
     float i() const { return unscalePID_i(Ki); }
     float d() const { return unscalePID_d(Kd); }
     float c() const { return 1; }
     float f() const { return 0; }
+    float pTerm() const { return work_p; }
+    float iTerm() const { return work_i; }
+    float dTerm() const { return work_d; }
+    float cTerm() const { return 0; }
+    float fTerm() const { return 0; }
     void set_Kp(float p) { Kp = p; }
     void set_Ki(float i) { Ki = scalePID_i(i); }
     void set_Kd(float d) { Kd = scalePID_d(d); }
     void set_Kc(float) {}
     void set_Kf(float) {}
-    void set(float p, float i, float d, float c=1, float f=0) { set_Kp(p); set_Ki(i); set_Kd(d); UNUSED(c); UNUSED(f); }
+    int low() const { return MIN_POW; }
+    int high() const { return MAX_POW; }
+    void reset() { pid_reset = true; }
+    void set(float p, float i, float d, float c=1, float f=0) { set_Kp(p); set_Ki(i); set_Kd(d); set_Kc(c); set_Kf(f); }
     void set(const raw_pid_t &raw) { set(raw.p, raw.i, raw.d); }
-    void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d); }
-  } PID_t;
+    void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d, raw.c, raw.f); }
+
+    float get_fan_scale_output(const uint8_t) { return 0; }
+
+    float get_extrusion_scale_output(const bool, const int32_t, const float, const int16_t) { return 0; }
+
+    float get_pid_output(const float target, const float current) {
+      const float pid_error = target - current;
+      if (!target || pid_error < -(PID_FUNCTIONAL_RANGE)) {
+        pid_reset = true;
+        return 0;
+      }
+      else if (pid_error > PID_FUNCTIONAL_RANGE) {
+        pid_reset = true;
+        return MAX_POW;
+      }
+
+      if (pid_reset) {
+        pid_reset = false;
+        temp_iState = 0.0;
+        work_d = 0.0;
+      }
+
+      const float max_power_over_i_gain = float(MAX_POW) / Ki - float(MIN_POW);
+      temp_iState = constrain(temp_iState + pid_error, 0, max_power_over_i_gain);
+
+      work_p = Kp * pid_error;
+      work_i = Ki * temp_iState;
+      work_d = work_d + PID_K2 * (Kd * (temp_dState - current) - work_d);
+
+      temp_dState = current;
+
+      return constrain(work_p + work_i + work_d + float(MIN_POW), 0, MAX_POW);
+    }
+
+  };
 
 #endif
 
 #if ENABLED(PIDTEMP)
 
-  typedef struct {
-    float Kp, Ki, Kd, Kc;
-    float p() const { return Kp; }
-    float i() const { return unscalePID_i(Ki); }
-    float d() const { return unscalePID_d(Kd); }
+  /// @brief Extrusion scaled PID class
+  template<int MIN_POW, int MAX_POW, int LPQ_ARR_SZ>
+  struct PIDC_t : public PID_t<MIN_POW, MAX_POW> {
+  private:
+    using base = PID_t<MIN_POW, MAX_POW>;
+    float work_c = 0;
+    float prev_e_pos = 0;
+    int32_t lpq[LPQ_ARR_SZ] = {};
+    int16_t lpq_ptr = 0;
+  public:
+    float Kc = 0;
     float c() const { return Kc; }
-    float f() const { return 0; }
-    void set_Kp(float p) { Kp = p; }
-    void set_Ki(float i) { Ki = scalePID_i(i); }
-    void set_Kd(float d) { Kd = scalePID_d(d); }
     void set_Kc(float c) { Kc = c; }
-    void set_Kf(float) {}
-    void set(float p, float i, float d, float c=1, float f=0) { set_Kp(p); set_Ki(i); set_Kd(d); set_Kc(c); set_Kf(f); }
+    float cTerm() const { return work_c; }
+    void set(float p, float i, float d, float c=1, float f=0) {
+      base::set_Kp(p);
+      base::set_Ki(i);
+      base::set_Kd(d);
+      set_Kc(c);
+      base::set_Kf(f);
+    }
     void set(const raw_pid_t &raw) { set(raw.p, raw.i, raw.d); }
-    void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d, raw.c); }
-  } PIDC_t;
+    void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d, raw.c, raw.f); }
+    void reset() {
+      base::reset();
+      prev_e_pos = 0;
+      lpq_ptr = 0;
+      LOOP_L_N(i, LPQ_ARR_SZ) lpq[i] = 0;
+    }
 
-  typedef struct {
-    float Kp, Ki, Kd, Kf;
-    float p() const { return Kp; }
-    float i() const { return unscalePID_i(Ki); }
-    float d() const { return unscalePID_d(Kd); }
-    float c() const { return 1; }
+    float get_extrusion_scale_output(const bool is_active, const int32_t e_position, const float e_mm_per_step, const int16_t lpq_len) {
+      work_c = 0;
+      if (!is_active) return work_c;
+
+      if (e_position > prev_e_pos) {
+        lpq[lpq_ptr] = e_position - prev_e_pos;
+        prev_e_pos = e_position;
+      }
+      else
+        lpq[lpq_ptr] = 0;
+
+      ++lpq_ptr;
+
+      if (lpq_ptr >= LPQ_ARR_SZ || lpq_ptr >= lpq_len)
+        lpq_ptr = 0;
+
+      work_c = (lpq[lpq_ptr] * e_mm_per_step) * Kc;
+
+      return work_c;
+    }
+  };
+
+  /// @brief Fan scaled PID, this class implements the get_fan_scale_output() method
+  /// @tparam MIN_POW @see PID_t
+  /// @tparam MAX_POW @see PID_t
+  /// @tparam SCALE_MIN_SPEED parameter from Configuration_adv.h
+  /// @tparam SCALE_LIN_FACTOR parameter from Configuration_adv.h
+  template<int MIN_POW, int MAX_POW, int SCALE_MIN_SPEED, int SCALE_LIN_FACTOR>
+  struct PIDF_t : public PID_t<MIN_POW, MAX_POW> {
+  private:
+    using base = PID_t<MIN_POW, MAX_POW>;
+    float work_f = 0;
+  public:
+    float Kf = 0;
     float f() const { return Kf; }
-    void set_Kp(float p) { Kp = p; }
-    void set_Ki(float i) { Ki = scalePID_i(i); }
-    void set_Kd(float d) { Kd = scalePID_d(d); }
-    void set_Kc(float) {}
     void set_Kf(float f) { Kf = f; }
-    void set(float p, float i, float d, float c=1, float f=0) { set_Kp(p); set_Ki(i); set_Kd(d); set_Kf(f); }
+    float fTerm() const { return work_f; }
+    void set(float p, float i, float d, float c=1, float f=0) {
+      base::set_Kp(p);
+      base::set_Ki(i);
+      base::set_Kd(d);
+      base::set_Kc(c);
+      set_Kf(f);
+    }
     void set(const raw_pid_t &raw) { set(raw.p, raw.i, raw.d); }
-    void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d, raw.f); }
-  } PIDF_t;
+    void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d, raw.c, raw.f); }
 
-  typedef struct {
-    float Kp, Ki, Kd, Kc, Kf;
-    float p() const { return Kp; }
-    float i() const { return unscalePID_i(Ki); }
-    float d() const { return unscalePID_d(Kd); }
-    float c() const { return Kc; }
+    float get_fan_scale_output(const uint8_t fan_speed) {
+      work_f = 0;
+      if (fan_speed > SCALE_MIN_SPEED)
+        work_f = Kf + (SCALE_LIN_FACTOR) * fan_speed;
+
+      return work_f;
+    }
+  };
+
+  /// @brief Inherits PID and PIDC - can't use proper diamond inheritance w/o virtual
+  template<int MIN_POW, int MAX_POW, int LPQ_ARR_SZ, int SCALE_MIN_SPEED, int SCALE_LIN_FACTOR>
+  struct PIDCF_t : public PIDC_t<MIN_POW, MAX_POW, LPQ_ARR_SZ> {
+  private:
+    using base = PID_t<MIN_POW, MAX_POW>;
+    using cPID = PIDC_t<MIN_POW, MAX_POW, LPQ_ARR_SZ>;
+    float work_f = 0;
+  public:
+    float Kf = 0;
+    float c() const { return cPID::c(); }
     float f() const { return Kf; }
-    void set_Kp(float p) { Kp = p; }
-    void set_Ki(float i) { Ki = scalePID_i(i); }
-    void set_Kd(float d) { Kd = scalePID_d(d); }
-    void set_Kc(float c) { Kc = c; }
+    void set_Kc(float c) { cPID::set_Kc(c); }
     void set_Kf(float f) { Kf = f; }
-    void set(float p, float i, float d, float c=1, float f=0) { set_Kp(p); set_Ki(i); set_Kd(d); set_Kc(c); set_Kf(f); }
+    float cTerm() const { return cPID::cTerm(); }
+    float fTerm() const { return work_f; }
+    void set(float p, float i, float d, float c=1, float f=0) {
+      base::set_Kp(p);
+      base::set_Ki(i);
+      base::set_Kd(d);
+      cPID::set_Kc(c);
+      set_Kf(f);
+    }
     void set(const raw_pid_t &raw) { set(raw.p, raw.i, raw.d); }
     void set(const raw_pidcf_t &raw) { set(raw.p, raw.i, raw.d, raw.c, raw.f); }
-  } PIDCF_t;
+
+    void reset() { cPID::reset(); }
+
+    float get_fan_scale_output(const uint8_t fan_speed) {
+      work_f = fan_speed > (SCALE_MIN_SPEED) ? Kf + (SCALE_LIN_FACTOR) * fan_speed : 0;
+      return work_f;
+    }
+    float get_extrusion_scale_output(const bool is_active, const int32_t e_position, const float e_mm_per_step, const int16_t lpq_len) {
+      return cPID::get_extrusion_scale_output(is_active, e_position, e_mm_per_step, lpq_len);
+    }
+  };
 
   typedef
     #if BOTH(PID_EXTRUSION_SCALING, PID_FAN_SCALING)
-      PIDCF_t
+      PIDCF_t<0, PID_MAX, LPQ_MAX_LEN, PID_FAN_SCALING_MIN_SPEED, PID_FAN_SCALING_LIN_FACTOR>
     #elif ENABLED(PID_EXTRUSION_SCALING)
-      PIDC_t
+      PIDC_t<0, PID_MAX, LPQ_MAX_LEN>
     #elif ENABLED(PID_FAN_SCALING)
-      PIDF_t
+      PIDF_t<0, PID_MAX, PID_FAN_SCALING_MIN_SPEED, PID_FAN_SCALING_LIN_FACTOR>
     #else
-      PID_t
+      PID_t<0, PID_MAX>
     #endif
   hotend_pid_t;
 
-  #if ENABLED(PID_EXTRUSION_SCALING)
-    typedef IF<(LPQ_MAX_LEN > 255), uint16_t, uint8_t>::type lpq_ptr_t;
-  #endif
-
   #if ENABLED(PID_PARAMS_PER_HOTEND)
     #define SET_HOTEND_PID(F,H,V) thermalManager.temp_hotend[H].pid.set_##F(V)
   #else
@@ -326,14 +448,14 @@ struct PIDHeaterInfo : public HeaterInfo {
 #endif
 #if HAS_HEATED_BED
   #if ENABLED(PIDTEMPBED)
-    typedef struct PIDHeaterInfo<PID_t> bed_info_t;
+    typedef struct PIDHeaterInfo<PID_t<MIN_BED_POWER, MAX_BED_POWER>> bed_info_t;
   #else
     typedef heater_info_t bed_info_t;
   #endif
 #endif
 #if HAS_HEATED_CHAMBER
   #if ENABLED(PIDTEMPCHAMBER)
-    typedef struct PIDHeaterInfo<PID_t> chamber_info_t;
+    typedef struct PIDHeaterInfo<PID_t<MIN_CHAMBER_POWER, MAX_CHAMBER_POWER>> chamber_info_t;
   #else
     typedef heater_info_t chamber_info_t;
   #endif
@@ -585,11 +707,6 @@ class Temperature {
       static hotend_watch_t watch_hotend[HOTENDS];
     #endif
 
-    #if ENABLED(PID_EXTRUSION_SCALING)
-      static int32_t pes_e_position, lpq[LPQ_MAX_LEN];
-      static lpq_ptr_t lpq_ptr;
-    #endif
-
     #if ENABLED(MPCTEMP)
       static int32_t mpc_e_position;
     #endif
@@ -1035,7 +1152,7 @@ class Temperature {
 
       // Update the temp manager when PID values change
       #if ENABLED(PIDTEMP)
-        static void updatePID() { TERN_(PID_EXTRUSION_SCALING, pes_e_position = 0); }
+        static void updatePID() { HOTEND_LOOP() temp_hotend[e].pid.reset(); }
         static void setPID(const uint8_t hotend, const_float_t p, const_float_t i, const_float_t d) {
           #if ENABLED(PID_PARAMS_PER_HOTEND)
             temp_hotend[hotend].pid.set(p, i, d);
diff --git a/buildroot/tests/LPC1768 b/buildroot/tests/LPC1768
index 9fb7479d9921..535e776a3892 100755
--- a/buildroot/tests/LPC1768
+++ b/buildroot/tests/LPC1768
@@ -52,5 +52,12 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO
            SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER SOFT_RESET_ON_KILL SOFT_RESET_VIA_SERIAL
 exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
 
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_V1_3 EXTRUDERS 2 \
+        TEMP_SENSOR_0 1 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 1 TEMP_SENSOR_CHAMBER 1 \
+        TEMP_CHAMBER_PIN P1_30 HEATER_CHAMBER_PIN P0_28
+opt_enable PIDTEMPBED PIDTEMPCHAMBER PID_EXTRUSION_SCALING PID_FAN_SCALING
+exec_test $1 $2 "SKR v1.3 with 2*Extr, bed, chamber all PID." "$3"
+
 # clean up
 restore_configs