diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index ef2a5f1fa9e9..105538c041b4 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -467,6 +467,7 @@ #define BOARD_MELLOW_FLY_E3_V2 5249 // Mellow Fly E3 V2 (STM32F407VG) #define BOARD_FYSETC_CHEETAH_V30 5250 // FYSETC Cheetah V3.0 (STM32F446RC) #define BOARD_BLACKBEEZMINI_V1 5251 // BlackBeezMini V1 (STM32F401CCU6) +#define BOARD_MELLOW_FLY_E3_PRO_V3 5252 // Mellow Fly E3 Pro V3 (STM32F407VG) // // ARM Cortex-M7 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index cdc4fdb7a406..d064e82ce978 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -817,7 +817,9 @@ #elif MB(I3DBEEZ9_V1) #include "stm32f4/pins_I3DBEEZ9.h" // STM32F4 env:I3DBEEZ9_V1 #elif MB(MELLOW_FLY_E3_V2) - #include "stm32f4/pins_MELLOW_FLY_E3_V2.h" // STM32F4 env:FLY_E3_V2 + #include "stm32f4/pins_MELLOW_FLY_E3_V2.h" // STM32F4 env:STM32F407VG_mellow_fly_e3 +#elif MB(MELLOW_FLY_E3_PRO_V3) + #include "stm32f4/pins_MELLOW_FLY_E3_PRO_V3.h" // STM32F4 env:STM32F407VG_mellow_fly_e3 #elif MB(BLACKBEEZMINI_V1) #include "stm32f4/pins_BLACKBEEZMINI.h" // STM32F4 env:BLACKBEEZMINI_V1 diff --git a/Marlin/src/pins/stm32f4/pins_MELLOW_FLY_E3_PRO_V3.h b/Marlin/src/pins/stm32f4/pins_MELLOW_FLY_E3_PRO_V3.h new file mode 100644 index 000000000000..b34b124c6cc4 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_MELLOW_FLY_E3_PRO_V3.h @@ -0,0 +1,586 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Mellow Fly E3 Pro V3 pin assignments + * Schematic: https://github.com/Mellow-3D/Fly-E3-Pro-v3/blob/main/Hardware/Schematic_E3-Pro-V3.pdf + * Pins: https://github.com/Mellow-3D/Fly-E3-Pro-v3/blob/main/Hardware/fly_e3_prov3_pins.svg + */ + +#include "env_validate.h" + +#if EXTRUDERS > 2 || E_STEPPERS > 2 + #error "Fly E3 Pro V3 only supports up to 2 E steppers." +#elif HOTENDS > 2 + #error "Fly E3 Pro V3 only supports up to 2 hotends." +#endif + +#define BOARD_INFO_NAME "Fly E3 Pro V3" +#define BOARD_WEBSITE_URL "github.com/Mellow-3D/Fly-E3-Pro-v3" + +#define USES_DIAG_JUMPERS + +// If you have the BigTreeTech driver expansion module, enable BTT_MOTOR_EXPANSION +// https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT +//#define BTT_MOTOR_EXPANSION + +#if ALL(HAS_WIRED_LCD, BTT_MOTOR_EXPANSION) + #if ANY(CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY) + #define EXP_MOT_USE_EXP2_ONLY 1 + #else + #error "You can't use both an LCD and a Motor Expansion Module on EXP1/EXP2 at the same time." + #endif +#endif + +// Use one of these or SDCard-based Emulation will be used +#if NO_EEPROM_SELECTED + //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation + #define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + // Decrease delays and flash wear by spreading writes across the + // 128 kB sector allocated for EEPROM emulation. + #define FLASH_EEPROM_LEVELING +#endif + +// +// Servos +// +#define SERVO0_PIN PB0 // SERVOS + +// +// Trinamic Stallguard pins +// +#define X_DIAG_PIN PA2 // X-STOP +#define Y_DIAG_PIN PB10 // Y-STOP +#define Z_DIAG_PIN PC4 // Z-STOP +#define E0_DIAG_PIN PD0 // E0-STOP +#define E1_DIAG_PIN PD1 // E1-STOP + +// +// Limit Switches +// +#ifdef X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN +#else + #define X_STOP_PIN PA2 // X-STOP +#endif + +#ifdef Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN +#else + #define Y_STOP_PIN PB10 // Y-STOP +#endif + +#ifdef Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN +#else + #ifndef Z_STOP_PIN + #define Z_STOP_PIN PC4 // Z-STOP + #endif +#endif + +// +// Z Probe must be this pin +// +#define Z_MIN_PROBE_PIN PC5 // PROBE + +// +// Probe enable +// +#if ENABLED(PROBE_ENABLE_DISABLE) && !defined(PROBE_ENABLE_PIN) + #define PROBE_ENABLE_PIN SERVO0_PIN +#endif + +// +// Filament Runout Sensor +// +#define FIL_RUNOUT_PIN PD0 // E0STOP +#define FIL_RUNOUT2_PIN PD1 // E1STOP + +// +// Power Supply Control +// +#ifndef PS_ON_PIN + #define PS_ON_PIN PD11 // PS-ON +#endif + +// +// Power Loss Detection +// +#ifndef POWER_LOSS_PIN + #define POWER_LOSS_PIN PD10 // PWRDET +#endif + +// +// Laser Port +// +#if HAS_CUTTER + #define SPINDLE_LASER_ENA_PIN PB1 +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PE5 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PB9 +#define Y_DIR_PIN PB8 + +#define Z_ENABLE_PIN PC2 +#define Z_STEP_PIN PA15 +#define Z_DIR_PIN PD7 + +#define E0_ENABLE_PIN PD6 +#define E0_STEP_PIN PD4 +#define E0_DIR_PIN PD3 + +#define E1_ENABLE_PIN PC15 +#define E1_STEP_PIN PC13 +#define E1_DIR_PIN PC0 + +// +// Integrated TMC2209 driver defaults +// +#if (HAS_X_AXIS && !AXIS_DRIVER_TYPE_X(TMC2209)) \ + || (HAS_Y_AXIS && !AXIS_DRIVER_TYPE_Y(TMC2209)) \ + || (NUM_Z_STEPPERS >= 1 && !AXIS_DRIVER_TYPE_Z(TMC2209)) \ + || (NUM_Z_STEPPERS >= 2 && !AXIS_DRIVER_TYPE_Z2(TMC2209)) \ + || (EXTRUDERS >= 1 && !AXIS_DRIVER_TYPE_E0(TMC2209)) \ + || (EXTRUDERS >= 2 && !AXIS_DRIVER_TYPE_E1(TMC2209)) + #error "All DRIVER TYPEs must be TMC2209 for BOARD_MELLOW_FLY_E3_PRO_V3." +#endif + +// RSENSE defaults +#if HAS_X_AXIS + static_assert(X_RSENSE == 0.11, "X_RSENSE must be 0.11 for BOARD_MELLOW_FLY_E3_PRO_V3."); +#endif +#if HAS_Y_AXIS + static_assert(Y_RSENSE == 0.11, "Y_RSENSE must be 0.11 for BOARD_MELLOW_FLY_E3_PRO_V3."); +#endif +#if NUM_Z_STEPPERS >= 1 + static_assert(Z_RSENSE == 0.11, "Z_RSENSE must be 0.11 for BOARD_MELLOW_FLY_E3_PRO_V3."); +#endif +#if NUM_Z_STEPPERS >= 2 + static_assert(Z2_RSENSE == 0.11, "Z2_RSENSE must be 0.11 for BOARD_MELLOW_FLY_E3_PRO_V3."); +#endif +#if EXTRUDERS >= 1 + static_assert(E0_RSENSE == 0.11, "E0_RSENSE must be 0.11 for BOARD_MELLOW_FLY_E3_PRO_V3."); +#endif +#if EXTRUDERS >= 2 + static_assert(E1_RSENSE == 0.11, "E1_RSENSE must be 0.11 for BOARD_MELLOW_FLY_E3_PRO_V3."); +#endif + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA3 // Analog Input "TB" +#define TEMP_0_PIN PA4 // Analog Input "TH0" + +#if TEMP_SENSOR_0_IS_MAX31865 + #define TEMP_0_CS_PIN PD15 // Max31865 CS + #define TEMP_0_SCK_PIN PD14 + #define TEMP_0_MISO_PIN PD12 + #define TEMP_0_MOSI_PIN PD13 + #define SOFTWARE_SPI // Max31865 use's Software SPI + #define FORCE_SOFT_SPI +#elif TEMP_SENSOR_0_IS_AD8495 + #define TEMP_0_CS_PIN PC7 // Max31855 CS + #define TEMP_0_SCK_PIN PD14 + #define TEMP_0_MISO_PIN PD12 + #define TEMP_0_MOSI_PIN PD13 + #define SOFTWARE_SPI // Max31855 use's Software SPI + #define FORCE_SOFT_SPI +#endif + +#define TEMP_1_PIN PA1 // Analog Input "TH0" + +#if TEMP_SENSOR_1_IS_MAX31865 + #define TEMP_1_CS_PIN PD15 // Max31865 CS + #define TEMP_1_SCK_PIN PD14 + #define TEMP_1_MISO_PIN PD12 + #define TEMP_1_MOSI_PIN PD13 + #define SOFTWARE_SPI // Max31865 use's Software SPI + #define FORCE_SOFT_SPI +#elif TEMP_SENSOR_1_IS_AD8495 + #define TEMP_1_CS_PIN PC7 // Max31855 CS + #define TEMP_1_SCK_PIN PD14 + #define TEMP_1_MISO_PIN PD12 + #define TEMP_1_MOSI_PIN PD13 + #define SOFTWARE_SPI // Max31855 use's Software SPI + #define FORCE_SOFT_SPI +#endif + +#define TEMP_BOARD_PIN PC1 // Board Temp + +// +// Heaters / Fans +// +#ifndef HEATER_BED_PIN + #define HEATER_BED_PIN PA0 // "HB" +#endif +#ifndef HEATER_0_PIN + #define HEATER_0_PIN PA5 // "HE0" +#endif +#ifndef HEATER_1_PIN + #define HEATER_1_PIN PC6 // "HE0" +#endif + +#ifndef FAN0_PIN + #define FAN0_PIN PA7 // "FAN0" +#endif +#ifndef FAN1_PIN + #define FAN1_PIN PA6 +#endif +#ifndef FAN2_PIN + #define FAN2_PIN PA5 +#endif +#ifndef FAN3_PIN + #define FAN3_PIN PA4 +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN PE4 + #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN + + #define Y_SERIAL_TX_PIN PE0 + #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN + + #define Z_SERIAL_TX_PIN PA8 + #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN + + #define E0_SERIAL_TX_PIN PD5 + #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN + + #define E1_SERIAL_TX_PIN PC14 + #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN + + // Reduce baud rate to improve software serial reliability + #ifndef TMC_BAUD_RATE + #define TMC_BAUD_RATE 19200 + #endif + +#endif // HAS_TMC_UART + +// +// SD Support +// +#ifndef SDCARD_CONNECTION + #if HAS_WIRED_LCD && DISABLED(NO_LCD_SDCARD) + #define SDCARD_CONNECTION LCD + #else + #define SDCARD_CONNECTION ONBOARD + #endif +#endif + +/** + * Fly-E3-v2 + * ------ ------ + * (BEEPER) PE11 | 1 2 | PE12 (BTN_ENC) (MISO) PB4 | 1 2 | PB3 (SCK) + * (LCD_EN) PA14 | 3 4 | PE6 (LCD_RS) (BTN_EN1) PA10 | 3 4 | PB2 (SD_SS) + * (LCD_D4) PE9 | 5 6 PE10 (LCD_D5) (BTN_EN2) PA9 | 5 6 | PB5 (MOSI) + * (LCD_D6) PE7 | 7 8 | PE8 (LCD_D7) (SD_DETECT) PA13 | 7 8 | RESET + * GND | 9 10 | 5V GND | 9 10 | -- + * ------ ------ + * EXP1 EXP2 + */ +#define EXP1_01_PIN PE11 +#define EXP1_02_PIN PE12 +#define EXP1_03_PIN PA14 +#define EXP1_04_PIN PE6 +#define EXP1_05_PIN PE9 +#define EXP1_06_PIN PE10 +#define EXP1_07_PIN PE7 +#define EXP1_08_PIN PE8 + +#define EXP2_01_PIN PB4 +#define EXP2_02_PIN PB3 +#define EXP2_03_PIN PA10 +#define EXP2_04_PIN PB2 +#define EXP2_05_PIN PA9 +#define EXP2_06_PIN PB5 +#define EXP2_07_PIN PA13 +#define EXP2_08_PIN -1 + +// +// Onboard SD card +// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2 +// +#if SD_CONNECTION_IS(LCD) + #define SDSS EXP2_04_PIN + #define SD_SS_PIN SDSS + #define SD_SCK_PIN EXP2_02_PIN + #define SD_MISO_PIN EXP2_01_PIN + #define SD_MOSI_PIN EXP2_06_PIN + #define SD_DETECT_PIN EXP2_07_PIN +#elif SD_CONNECTION_IS(ONBOARD) + #define ONBOARD_SDIO // Use SDIO for onboard SD +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +#if ENABLED(BTT_MOTOR_EXPANSION) + /** ----- ----- + * -- | . . | GND -- | . . | GND + * -- | . . | M1EN M2EN | . . | M3EN + * M1STP | . . M1DIR M1RX | . . M1DIAG + * M2DIR | . . | M2STP M2RX | . . | M2DIAG + * M3DIR | . . | M3STP M3RX | . . | M3DIAG + * ----- ----- + * EXP2 EXP1 + * + * NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN + */ + + // M1 on Driver Expansion Module + #define E2_STEP_PIN EXP2_06_PIN + #define E2_DIR_PIN EXP2_05_PIN + #define E2_ENABLE_PIN EXP2_07_PIN + #if !EXP_MOT_USE_EXP2_ONLY + #define E2_DIAG_PIN EXP1_05_PIN + #define E2_CS_PIN EXP1_06_PIN + #if HAS_TMC_UART + #define E2_SERIAL_TX_PIN EXP1_06_PIN + #define E2_SERIAL_RX_PIN EXP1_06_PIN + #endif + #endif + + // M2 on Driver Expansion Module + #define E3_STEP_PIN EXP2_03_PIN + #define E3_DIR_PIN EXP2_04_PIN + #if !EXP_MOT_USE_EXP2_ONLY + #define E3_ENABLE_PIN EXP1_08_PIN + #define E3_DIAG_PIN EXP1_03_PIN + #define E3_CS_PIN EXP1_04_PIN + #if HAS_TMC_UART + #define E3_SERIAL_TX_PIN EXP1_04_PIN + #define E3_SERIAL_RX_PIN EXP1_04_PIN + #endif + #else + #define E3_ENABLE_PIN EXP2_07_PIN + #endif + + // M3 on Driver Expansion Module + #define E4_STEP_PIN EXP2_01_PIN + #define E4_DIR_PIN EXP2_02_PIN + #if !EXP_MOT_USE_EXP2_ONLY + #define E4_ENABLE_PIN EXP1_07_PIN + #define E4_DIAG_PIN EXP1_01_PIN + #define E4_CS_PIN EXP1_02_PIN + #if HAS_TMC_UART + #define E4_SERIAL_TX_PIN EXP1_02_PIN + #define E4_SERIAL_RX_PIN EXP1_02_PIN + #endif + #else + #define E4_ENABLE_PIN EXP2_07_PIN + #endif + +#endif // BTT_MOTOR_EXPANSION + +// +// LCDs and Controllers +// +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS EXP2_03_PIN + #endif + +#elif HAS_WIRED_LCD + + #define BEEPER_PIN EXP1_01_PIN + #define BTN_ENC EXP1_02_PIN + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS EXP1_07_PIN + + #define BTN_EN1 EXP1_03_PIN + #define BTN_EN2 EXP1_05_PIN + + #define LCD_PINS_EN EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN + + #elif ENABLED(MKS_MINI_12864) + + #define DOGLCD_A0 EXP1_07_PIN + #define DOGLCD_CS EXP1_06_PIN + #define BTN_EN1 EXP2_03_PIN + #define BTN_EN2 EXP2_05_PIN + + #else + + #define LCD_PINS_RS EXP1_04_PIN + + #define BTN_EN1 EXP2_03_PIN + #define BTN_EN2 EXP2_05_PIN + + #define LCD_PINS_EN EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS EXP1_03_PIN + #define DOGLCD_A0 EXP1_04_PIN + //#define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally. + #if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN EXP1_06_PIN + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN EXP1_07_PIN + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN EXP1_08_PIN + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN EXP1_06_PIN + #endif + #endif // !FYSETC_MINI_12864 + + #if IS_ULTIPANEL + #define LCD_PINS_D5 EXP1_06_PIN + #define LCD_PINS_D6 EXP1_07_PIN + #define LCD_PINS_D7 EXP1_08_PIN + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif + +#endif // HAS_WIRED_LCD + +#if HAS_SPI_TFT + + #define BTN_ENC EXP1_02_PIN + #define BTN_EN1 EXP2_03_PIN + #define BTN_EN2 EXP2_05_PIN + + #if ENABLED(BTT_TFT35_SPI_V1_0) + // 480x320, 3.5", SPI Display with Rotary Encoder. + // Stock Display for the BIQU B1 SE. + #define TFT_CS_PIN EXP2_04_PIN + #define TFT_A0_PIN EXP2_07_PIN + + #define TOUCH_CS_PIN EXP1_04_PIN + #define TOUCH_SCK_PIN EXP1_05_PIN + #define TOUCH_MISO_PIN EXP1_06_PIN + #define TOUCH_MOSI_PIN EXP1_03_PIN + #define TOUCH_INT_PIN EXP1_07_PIN + + #elif ENABLED(MKS_TS35_V2_0) + + /** ------ ------ + * BEEPER | 1 2 | BTN_ENC SPI1_MISO | 1 2 | SPI1_SCK + * TFT_BKL / LCD_EN | 3 4 | TFT_RESET / LCD_RS BTN_EN1 | 3 4 | SPI1_CS + * TOUCH_CS / LCD_D4 | 5 6 TOUCH_INT / LCD_D5 BTN_EN2 | 5 6 SPI1_MOSI + * SPI1_CS / LCD_D6 | 7 8 | SPI1_RS / LCD_D7 SPI1_RS | 7 8 | RESET + * GND | 9 10 | VCC GND | 9 10 | VCC + * ------ ------ + * EXP1 EXP2 + */ + #define TFT_CS_PIN EXP1_07_PIN // SPI1_CS + #define TFT_A0_PIN EXP1_08_PIN // SPI1_RS + #define TFT_DC_PIN TFT_DC_PIN + + #define TFT_RESET_PIN EXP1_04_PIN + + #define LCD_BACKLIGHT_PIN EXP1_03_PIN + #define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 + + #define TOUCH_CS_PIN EXP1_05_PIN // SPI1_NSS + #define TOUCH_SCK_PIN EXP2_02_PIN // SPI1_SCK + #define TOUCH_MISO_PIN EXP2_01_PIN // SPI1_MISO + #define TOUCH_MOSI_PIN EXP2_06_PIN // SPI1_MOSI + + #define LCD_READ_ID 0xD3 + #define LCD_USE_DMA_SPI + + #define TFT_BUFFER_SIZE 14400 + + #endif + +#endif // HAS_SPI_TFT + +// Alter timing for graphical display +#if IS_U8GLIB_ST7920 + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 120 + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 80 + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 580 + #endif +#endif + +// +// NeoPixel LED +// +#ifndef BOARD_NEOPIXEL_PIN + #define BOARD_NEOPIXEL_PIN PB11 +#endif + +#if ENABLED(WIFISUPPORT) + // + // WIFI + // + + #define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this + #define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2 + #define ESP_WIFI_MODULE_RESET_PIN PE15 + #define ESP_WIFI_MODULE_GPIO0_PIN PE13 + #define ESP_WIFI_MODULE_GPIO4_PIN PE14 +#endif diff --git a/ini/renamed.ini b/ini/renamed.ini index 85f2df286273..722d48ce98e8 100644 --- a/ini/renamed.ini +++ b/ini/renamed.ini @@ -98,3 +98,6 @@ extends = renamed [env:STM32F446_tronxy] ;=> TRONXY_CXY_446_V10 extends = renamed + +[env:FLY_E3_V2] ;= STM32F407VG_mellow_fly_e3 +extends = renamed diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini index 9c6f751746c3..9693f84b69f7 100644 --- a/ini/stm32f4.ini +++ b/ini/stm32f4.ini @@ -872,9 +872,9 @@ monitor_speed = 250000 upload_protocol = dfu # -# Mellow Fly E3 V2 (STM32F407VGT6 ARM Cortex-M4) +# Mellow Fly E3 V2 / Pro V3 (STM32F407VGT6 ARM Cortex-M4) # -[env:FLY_E3_V2] +[env:STM32F407VG_mellow_fly_e3] extends = stm32_variant board = marlin_STM32F407VGT6_CCM board_build.variant = MARLIN_F4x7Vx