AEG MF 1400 KE
MaslowCNC Wiki: Electronics | Firmware | Mechanics | Software| Community Garden
| Feature | Value |
|---|---|
| Model # | MF 1400 KE |
| Cost (approx) | 300 € |
| Colet size | 8 / 12 mm |
| Ease of attaching Z-axis | Easy |
| Shaft connector size | 3/8 in |
| Variable speed (y/n) | Yes |
| Illuminated (y/n) | Yes |
| Dust collector (y/n) | Yes |
Available in EU. Comes with additional plunge base. Exactly the same specs as the Ridgid R2200 just rebranded. Used by dev team so well supported
Slightly expensive as it comes from the same assembly line as the R2200
AEG Combo router (MF-1400-KE), Cheapest option so far: www.rotopino.de
The RPM can go in between 10.000 and 23.000
- 3-6 mm HSS (SoftWood>23000) (HardWood>20400) (Plastics>15200) (ALUMINIUM>15200)
- 6-8 mm HSS (SoftWood>20400) (HardWood>17800) (Plastics>15200) (ALUMINIUM>12600)
- 8-10 mm HSS (SoftWood>17800) (HardWood>15200) (Plastics>12600) (ALUMINIUM>10000)
- 10-12 mm HM (SoftWood>17800) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)
- 12-20 mm HM (SoftWood>15200) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)
- 20-25 mm HM (SoftWood>15200) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)
- 25-40 mm HM (SoftWood>15200) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)