Bosch GOF 2000 CE, More Photos
MaslowCNC Wiki: Electronics | Firmware | Mechanics | Software| Community Garden
###Choosing a router, this is what you are looking for. The depth-stop can be locked so turning the spindle moves the router up and down.
The knob on the shaft is "press-fit". It took a 6mm steel rod and hammering to get it off.
The space for coupler and motor mount is tight but was possible.
The lock that needs to be tightened is in the way of the z-motor mount. Opening one screw and turning it solved that issue.
The "Power On" is on the right handle and can be locked. Not ideal but I will have one or more "Emergency Stop" somewhere.
The depth for Z is given with 65mm, I measure 60mm
Wheel for speeds is seamless from 1 to 6 so an estimate
The dust collector has an inner part that can be taken out for "Big Tools"
The base plate
The router is high, so a quick and dirty fix was found by mounting the brackets on a pice of hard wood. That got rid of my fear that they could twist.
