diff --git a/src/constraints/outage_constraints.jl b/src/constraints/outage_constraints.jl index 9a243725d..6f8b4e7a8 100644 --- a/src/constraints/outage_constraints.jl +++ b/src/constraints/outage_constraints.jl @@ -391,15 +391,15 @@ function add_cannot_have_MG_with_only_PVwind_constraints(m, p) end function add_MG_dc_coupled_tech_elec_storage_constraints(m, p) - # # Lower bound on DC coupled PV and battery inverter power capacity - # @constraint(m, [s in p.s.electric_utility.scenarios, tz in p.s.electric_utility.outage_start_time_steps, ts in p.s.electric_utility.outage_time_steps], - # m[:dvDCCoupledTechStorageInverterSize]["ElectricStorage"] >= - # m[:dvMGDischargeFromStorage][s, tz, ts] + - # sum(m[:dvMGRatedProduction][t, s, tz, ts] * p.production_factor[t, tz+ts-1] * p.levelization_factor[t] - # - m[:dvMGProductionToStorage][t, s, tz, ts] - m[:dvMGCurtail][t, s, tz, ts] - # for t in p.techs.dc_couple_with_stor - # ) - # ) + # Lower bound on DC coupled PV and battery inverter power capacity + @constraint(m, [s in p.s.electric_utility.scenarios, tz in p.s.electric_utility.outage_start_time_steps, ts in p.s.electric_utility.outage_time_steps], + m[:dvDCCoupledTechStorageInverterSize]["ElectricStorage"] >= + m[:dvMGDischargeFromStorage][s, tz, ts] + + sum(m[:dvMGRatedProduction][t, s, tz, ts] * p.production_factor[t, tz+ts-1] * p.levelization_factor[t] + - m[:dvMGProductionToStorage][t, s, tz, ts] - m[:dvMGCurtail][t, s, tz, ts] + for t in p.techs.dc_couple_with_stor + ) + ) # Don't let AC coupled elec techs charge battery. # Future development could make this an option by adding a bool input and creating the set p.techs.elec_cannot_charge_stor that is different than p.techs.ac_couple_with_stor diff --git a/src/constraints/storage_constraints.jl b/src/constraints/storage_constraints.jl index 9878c14e1..8d835ed97 100644 --- a/src/constraints/storage_constraints.jl +++ b/src/constraints/storage_constraints.jl @@ -104,25 +104,25 @@ function add_elec_storage_dispatch_constraints(m, p, b; _n="") end function add_dc_coupled_tech_elec_storage_constraints(m, p, b; _n="") - # # Constraint (4d)-1: Lower bound on DC coupled PV and battery inverter power capacity (inverter direction) - # @constraint(m, [ts in p.time_steps], - # m[Symbol("dvDCCoupledTechStorageInverterSize"*_n)][b] >= - # m[Symbol("dvDischargeFromStorage"*_n)][b,ts] - # - sum(m[Symbol("dvProductionToStorage"*_n)][b, t, ts] for t in p.techs.ac_couple_with_stor) - # + sum(p.production_factor[t, ts] * p.levelization_factor[t] * m[Symbol("dvRatedProduction"*_n)][t,ts] - # - m[Symbol("dvProductionToStorage"*_n)][b, t, ts] - # - m[Symbol("dvCurtail"*_n)][t, ts] for t in p.techs.dc_couple_with_stor) - # ) - - # # Constraint (4d)-2: Lower bound on DC coupled PV and battery inverter power capacity (rectifier direction) - # @constraint(m, [ts in p.time_steps], - # m[Symbol("dvDCCoupledTechStorageInverterSize"*_n)][b] >= - # - m[Symbol("dvDischargeFromStorage"*_n)][b,ts] - # + sum(m[Symbol("dvProductionToStorage"*_n)][b, t, ts] for t in p.techs.ac_couple_with_stor) - # - sum(p.production_factor[t, ts] * p.levelization_factor[t] * m[Symbol("dvRatedProduction"*_n)][t,ts] - # - m[Symbol("dvProductionToStorage"*_n)][b, t, ts] - # - m[Symbol("dvCurtail"*_n)][t, ts] for t in p.techs.dc_couple_with_stor) - # ) + # Constraint (4d)-1: Lower bound on DC coupled PV and battery inverter power capacity (inverter direction) + @constraint(m, [ts in p.time_steps], + m[Symbol("dvDCCoupledTechStorageInverterSize"*_n)][b] >= + m[Symbol("dvDischargeFromStorage"*_n)][b,ts] + - sum(m[Symbol("dvProductionToStorage"*_n)][b, t, ts] for t in p.techs.ac_couple_with_stor) + + sum(p.production_factor[t, ts] * p.levelization_factor[t] * m[Symbol("dvRatedProduction"*_n)][t,ts] + - m[Symbol("dvProductionToStorage"*_n)][b, t, ts] + - m[Symbol("dvCurtail"*_n)][t, ts] for t in p.techs.dc_couple_with_stor) + ) + + # Constraint (4d)-2: Lower bound on DC coupled PV and battery inverter power capacity (rectifier direction) + @constraint(m, [ts in p.time_steps], + m[Symbol("dvDCCoupledTechStorageInverterSize"*_n)][b] >= + - m[Symbol("dvDischargeFromStorage"*_n)][b,ts] + + sum(m[Symbol("dvProductionToStorage"*_n)][b, t, ts] for t in p.techs.ac_couple_with_stor) + - sum(p.production_factor[t, ts] * p.levelization_factor[t] * m[Symbol("dvRatedProduction"*_n)][t,ts] + - m[Symbol("dvProductionToStorage"*_n)][b, t, ts] + - m[Symbol("dvCurtail"*_n)][t, ts] for t in p.techs.dc_couple_with_stor) + ) # Constraint (4d)-3: Don't let AC coupled elec techs charge battery. # Future development could make this an option by adding a bool input and creating the set p.techs.elec_cannot_charge_stor that is different than p.techs.ac_couple_with_stor diff --git a/src/core/reopt.jl b/src/core/reopt.jl index caf9d6e83..c32a6a959 100644 --- a/src/core/reopt.jl +++ b/src/core/reopt.jl @@ -610,9 +610,9 @@ function add_variables!(m::JuMP.AbstractModel, p::REoptInputs) binGHP[p.ghp_options], Bin # Can be <= 1 if require_ghp_purchase=0, and is ==1 if require_ghp_purchase=1 end - # if !isempty(p.techs.dc_couple_with_stor) - # @variable(m, dvDCCoupledTechStorageInverterSize[p.s.storage.types.elec] >= 0) # Power capacity of the DC coupled PV and electric storage system b [kW] - # end + if !isempty(p.techs.dc_couple_with_stor) + @variable(m, dvDCCoupledTechStorageInverterSize[p.s.storage.types.elec] >= 0) # Power capacity of the DC coupled PV and electric storage system b [kW] + end if !isempty(p.techs.gen) # Problem becomes a MILP @warn "Adding binary variable to model gas generator. Some solvers are very slow with integer variables." diff --git a/src/results/electric_storage.jl b/src/results/electric_storage.jl index e74731f0a..fd7cee9df 100644 --- a/src/results/electric_storage.jl +++ b/src/results/electric_storage.jl @@ -23,9 +23,9 @@ function add_electric_storage_results(m::JuMP.AbstractModel, p::REoptInputs, d:: r = Dict{String, Any}() r["size_kwh"] = round(value(m[Symbol("dvStorageEnergy"*_n)][b]), digits=2) r["size_kw"] = round(value(m[Symbol("dvStoragePower"*_n)][b]), digits=2) - # if !isempty(p.techs.dc_couple_with_stor) - # r["dc_couple_inverter_size_kw"] = round(value(m[:dvDCCoupledTechStorageInverterSize][b]), digits=2) - # end + if !isempty(p.techs.dc_couple_with_stor) + r["dc_couple_inverter_size_kw"] = round(value(m[:dvDCCoupledTechStorageInverterSize][b]), digits=2) + end if r["size_kwh"] != 0 soc = (m[Symbol("dvStoredEnergy"*_n)][b, ts] for ts in p.time_steps) diff --git a/test/ac_dc_pvs_results.json b/test/ac_dc_pvs_results.json index 92c38a326..9ebecfc26 100644 --- a/test/ac_dc_pvs_results.json +++ b/test/ac_dc_pvs_results.json @@ -1,68 +1,202428 @@ { - "Messages": { - "errors": [ - [ - "ErrorException(\"Constraints of type MathOptInterface.VectorAffineFunction{Float64}-in-MathOptInterface.Indicator{MathOptInterface.ACTIVATE_ON_ONE, MathOptInterface.GreaterThan{Float64}} are not supported by the solver.\\n\\nIf you expected the solver to support your problem, you may have an error in your formulation. Otherwise, consider using a different solver.\\n\\nThe list of available solvers, along with the problem types they support, is available at https://jump.dev/JuMP.jl/stable/installation/#Supported-solvers.\")", - [ - "error(s::String) at error.jl:35", - "_moi_add_constraint(model::MathOptInterface.Utilities.CachingOptimizer{MathOptInterface.Bridges.LazyBridgeOptimizer{HiGHS.Optimizer}, MathOptInterface.Utilities.UniversalFallback{MathOptInterface.Utilities.Model{Float64}}}, f::MathOptInterface.VectorAffineFunction{Float64}, s::MathOptInterface.Indicator{MathOptInterface.ACTIVATE_ON_ONE, MathOptInterface.GreaterThan{Float64}}) at constraints.jl:679", - "add_constraint(model::Model, con::VectorConstraint{AffExpr, MathOptInterface.Indicator{MathOptInterface.ACTIVATE_ON_ONE, MathOptInterface.GreaterThan{Float64}}, VectorShape}, name::String) at constraints.jl:706", - "macro expansion at macros.jl:1345 [inlined]", - "(::REopt.var\"#226#229\"{REoptInputs{Scenario}, Model})(t::String) at macro.jl:301", - "#87 at container.jl:124 [inlined]", - "iterate at generator.jl:47 [inlined]", - "collect(itr::Base.Generator{JuMP.Containers.VectorizedProductIterator{Tuple{Vector{String}}}, JuMP.Containers.var\"#87#89\"{REopt.var\"#226#229\"{REoptInputs{Scenario}, Model}}}) at array.jl:834", - "map(f::Function, A::JuMP.Containers.VectorizedProductIterator{Tuple{Vector{String}}}) at abstractarray.jl:3313", - "container(f::Function, indices::JuMP.Containers.VectorizedProductIterator{Tuple{Vector{String}}}, ::Type{JuMP.Containers.DenseAxisArray}, names::Vector{Any}) at container.jl:123", - "container at container.jl:75 [inlined]", - "macro expansion at macros.jl:1213 [inlined]", - "add_outage_cost_constraints(m::Model, p::REoptInputs{Scenario}) at outage_constraints.jl:37", - "build_reopt!(m::Model, p::REoptInputs{Scenario}) at reopt.jl:385", - "run_reopt(m::Model, p::REoptInputs{Scenario}; organize_pvs::Bool) at reopt.jl:535", - "run_reopt at reopt.jl:532 [inlined]", - "run_reopt(m::Model, d::Dict{String, Any}) at reopt.jl:52", - "macro expansion at debugging_tests.jl:15 [inlined]", - "macro expansion at Test.jl:1577 [inlined]", - "top-level scope at debugging_tests.jl:6", - "eval at boot.jl:385 [inlined]", - "include_string(mapexpr::typeof(identity), mod::Module, code::String, filename::String) at loading.jl:2076", - "_include(mapexpr::Function, mod::Module, _path::String) at loading.jl:2136", - "include(fname::String) at client.jl:489", - "macro expansion at runtests.jl:15 [inlined]", - "macro expansion at Test.jl:1577 [inlined]", - "top-level scope at runtests.jl:15", - "eval at boot.jl:385 [inlined]", - "include_string(mapexpr::typeof(identity), mod::Module, code::String, filename::String) at loading.jl:2076", - "_include(mapexpr::Function, mod::Module, _path::String) at loading.jl:2136", - "include(fname::String) at client.jl:489", - "top-level scope at none:6", - "eval at boot.jl:385 [inlined]", - "exec_options(opts::Base.JLOptions) at client.jl:291", - "_start() at client.jl:552" + "Site": { + "annual_emissions_from_fuelburn_tonnes_PM25": 0.0, + "lifecycle_emissions_tonnes_CO2_bau": 911.04, + "annual_emissions_tonnes_CO2_bau": 36.4416, + "lifecycle_emissions_reduction_CO2_fraction": 0.09596724622409548, + "lifecycle_emissions_tonnes_PM25": 0.36, + "lifecycle_emissions_tonnes_PM25_bau": 0.39, + "annual_emissions_from_fuelburn_tonnes_NOx_bau": 0.0, + "lifecycle_emissions_tonnes_SO2": 0.33, + "lifecycle_emissions_from_fuelburn_tonnes_PM25": 0.0, + "annual_emissions_tonnes_SO2_bau": 0.0148, + "annual_emissions_from_fuelburn_tonnes_NOx": 0.0, + "lifecycle_emissions_from_fuelburn_tonnes_SO2_bau": 0.0, + "annual_emissions_tonnes_NOx": 0.086, + "renewable_electricity_fraction_bau": 0.040913, + "annual_emissions_tonnes_SO2": 0.0132, + "annual_emissions_tonnes_PM25": 0.0144, + "total_renewable_energy_fraction_bau": 0.040913, + "lifecycle_emissions_from_fuelburn_tonnes_CO2_bau": 0.0, + "lifecycle_emissions_tonnes_NOx": 2.15, + "annual_emissions_from_fuelburn_tonnes_CO2": 0.0, + "annual_emissions_from_fuelburn_tonnes_CO2_bau": 0.0, + "annual_emissions_tonnes_PM25_bau": 0.015600000000000001, + "total_renewable_energy_fraction": 0.179195, + "annual_emissions_from_fuelburn_tonnes_SO2": 0.0, + "lifecycle_emissions_from_fuelburn_tonnes_NOx_bau": 0.0, + "lifecycle_emissions_from_fuelburn_tonnes_SO2": 0.0, + "annual_renewable_electricity_kwh_bau": 45938.78, + "renewable_electricity_fraction": 0.179195, + "lifecycle_emissions_tonnes_NOx_bau": 2.38, + "lifecycle_emissions_tonnes_SO2_bau": 0.37, + "lifecycle_emissions_from_fuelburn_tonnes_CO2": 0.0, + "annual_emissions_from_fuelburn_tonnes_PM25_bau": 0.0, + "annual_emissions_from_fuelburn_tonnes_SO2_bau": 0.0, + "lifecycle_emissions_from_fuelburn_tonnes_PM25_bau": 0.0, + "annual_emissions_tonnes_NOx_bau": 0.09519999999999999, + "lifecycle_emissions_from_fuelburn_tonnes_NOx": 0.0, + "annual_renewable_electricity_kwh": 201205.81, + "lifecycle_emissions_tonnes_CO2": 823.61, + "annual_emissions_tonnes_CO2": 32.9444 + }, + "Outages": { + "expected_outage_cost": 37487.73833876885, + "electric_storage_microgrid_upgraded": true, + "unserved_load_per_outage_kwh": [ + [ + 2895.06 + ] + ], + "pv_microgrid_size_kw": 121.6667, + "pv_to_storage_series_kw": [ + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 2.467 + ] + ], + [ + [ + 7.593 + ] + ], + [ + [ + 27.479 + ] + ], + [ + [ + 14.63 + ] + ], + [ + [ + 21.782 + ] + ], + [ + [ + 4.668 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ] + ], + "critical_loads_per_outage_series_kw": [ + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 35.7032525087 + ] + ], + [ + [ + 39.13324098535 + ] + ], + [ + [ + 65.73176077400001 + ] + ], + [ + [ + 98.6273313215 + ] + ], + [ + [ + 98.5803765585 + ] + ], + [ + [ + 98.5217491685 + ] + ], + [ + [ + 98.5224687115 + ] + ], + [ + [ + 98.5364321545 + ] + ], + [ + [ + 98.536721342 + ] + ], + [ + [ + 98.3879792935 + ] + ], + [ + [ + 100.0259452265 + ] + ], + [ + [ + 108.680057484 + ] + ], + [ + [ + 84.6323553725 + ] + ], + [ + [ + 84.696616961 + ] + ], + [ + [ + 75.87522944749999 + ] + ], + [ + [ + 30.45418713595 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 16.06619674345 + ] + ], + [ + [ + 16.4401459875 + ] + ], + [ + [ + 16.42034179565 + ] + ], + [ + [ + 16.5319430043 + ] + ], + [ + [ + 35.5986135471 + ] + ], + [ + [ + 30.8088586586 + ] + ], + [ + [ + 47.996797263800005 + ] + ], + [ + [ + 74.0402767375 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 99.7876786385 + ] + ], + [ + [ + 108.353473262 + ] + ], + [ + [ + 75.3876981175 + ] + ], + [ + [ + 57.674028539999995 + ] + ], + [ + [ + 57.684197782999995 + ] + ], + [ + [ + 40.10646857055 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 16.0157476851 + ] + ], + [ + [ + 16.030614242 + ] + ], + [ + [ + 16.0572089538 + ] + ], + [ + [ + 5.697231791 + ] + ], + [ + [ + 30.045383660949998 + ] + ], + [ + [ + 29.6814054141 + ] + ], + [ + [ + 56.2519097805 + ] + ], + [ + [ + 56.2519097805 + ] + ], + [ + [ + 73.965579358 + ] + ], + [ + [ + 73.965579358 + ] + ], + [ + [ + 73.965579358 + ] + ], + [ + [ + 73.965579358 + ] + ], + [ + [ + 75.67873828249999 + ] + ], + [ + [ + 66.5308633285 + ] + ], + [ + [ + 48.817193751199994 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 35.793373751 + ] + ], + [ + [ + 39.14933736705 + ] + ], + [ + [ + 65.4495116485 + ] + ], + [ + [ + 98.08212518399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 98.07451971399999 + ] + ], + [ + [ + 99.7876786385 + ] + ], + [ + [ + 108.353473262 + ] + ], + [ + [ + 84.244532906 + ] + ], + [ + [ + 84.244532906 + ] + ], + [ + [ + 75.3876981175 + ] + ], + [ + [ + 30.45418713595 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ] + ], + "pv_microgrid_upgrade_cost": 0.0, + "max_outage_cost_per_outage_duration": [ + 37487.73833876885 + ], + "unserved_load_series_kw": [ + [ + [ + 8.029132914089132e-13 + ] + ], + [ + [ + 8.029132914089132e-13 + ] + ], + [ + [ + 8.029132914089132e-13 + ] + ], + [ + [ + 3.8269466130999987 + ] + ], + [ + [ + 4.498574924990535 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 7.0779346833514865 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 16.224439984163155 + ] + ], + [ + [ + 18.526527228529428 + ] + ], + [ + [ + 38.47081039497126 + ] + ], + [ + [ + 57.80915395355413 + ] + ], + [ + [ + 56.7607599028973 + ] + ], + [ + [ + 94.84041781498684 + ] + ], + [ + [ + 108.680057484 + ] + ], + [ + [ + 84.6323553725 + ] + ], + [ + [ + 84.696616961 + ] + ], + [ + [ + 75.87522944749999 + ] + ], + [ + [ + 30.45418713595 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 16.06619674345 + ] + ], + [ + [ + 16.4401459875 + ] + ], + [ + [ + 16.42034179565 + ] + ], + [ + [ + 16.5319430043 + ] + ], + [ + [ + 35.5986135471 + ] + ], + [ + [ + 27.545618904499626 + ] + ], + [ + [ + 8.99240288678419 + ] + ], + [ + [ + 15.780079410714672 + ] + ], + [ + [ + 47.66268221460136 + ] + ], + [ + [ + 48.48319717274314 + ] + ], + [ + [ + 36.54749512535171 + ] + ], + [ + [ + 25.114796075762865 + ] + ], + [ + [ + 37.42444801644768 + ] + ], + [ + [ + 56.475090764302394 + ] + ], + [ + [ + 88.85549108487506 + ] + ], + [ + [ + 108.353473262 + ] + ], + [ + [ + 75.3876981175 + ] + ], + [ + [ + 57.674028539999995 + ] + ], + [ + [ + 57.684197782999995 + ] + ], + [ + [ + 40.10646857055 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 16.0157476851 + ] + ], + [ + [ + 16.030614242 + ] + ], + [ + [ + 16.0572089538 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 32.83305689704975 + ] + ], + [ + [ + 32.630945958468516 + ] + ], + [ + [ + 66.5308633285 + ] + ], + [ + [ + 48.817193751199994 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 3.907985046680551e-13 + ] + ], + [ + [ + 7.411342873742273 + ] + ], + [ + [ + 15.938152947799999 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 35.793373751 + ] + ], + [ + [ + 30.509936857109135 + ] + ], + [ + [ + 25.365798356366657 + ] + ], + [ + [ + 36.51785710335283 + ] + ], + [ + [ + 21.58725481171663 + ] + ], + [ + [ + 13.76971218578071 + ] + ], + [ + [ + 13.496360661803246 + ] + ], + [ + [ + 19.900055645888116 + ] + ], + [ + [ + 32.82177591806004 + ] + ], + [ + [ + 53.41616690522777 + ] + ], + [ + [ + 86.83480344212165 + ] + ], + [ + [ + 108.353473262 + ] + ], + [ + [ + 84.244532906 + ] + ], + [ + [ + 84.244532906 + ] + ], + [ + [ + 75.3876981175 + ] + ], + [ + [ + 30.45418713595 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ], + [ + [ + 16.553543950349997 + ] + ] + ], + "soc_series_fraction": [ + [ + [ + 0.917 + ] + ], + [ + [ + 0.834 + ] + ], + [ + [ + 0.751 + ] + ], + [ + [ + 0.591 + ] + ], + [ + [ + 0.431 + ] + ], + [ + [ + 0.298 + ] + ], + [ + [ + 0.138 + ] + ], + [ + [ + 0.011 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.011 + ] + ], + [ + [ + 0.045 + ] + ], + [ + [ + 0.169 + ] + ], + [ + [ + 0.235 + ] + ], + [ + [ + 0.334 + ] + ], + [ + [ + 0.355 + ] + ], + [ + [ + 0.35 + ] + ], + [ + [ + 0.283 + ] + ], + [ + [ + 0.283 + ] + ], + [ + [ + 0.123 + ] + ], + [ + [ + 0.123 + ] + ], + [ + [ + 0.123 + ] + ], + [ + [ + 0.123 + ] + ], + [ + [ + 0.123 + ] + ], + [ + [ + 0.043 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ] + ], + "pv_curtailed_series_kw": [ + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ] + ], + "storage_microgrid_upgrade_cost": 0.0, + "pv_to_load_series_kw": [ + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 2.758 + ] + ], + [ + [ + 39.255 + ] + ], + [ + [ + 59.673 + ] + ], + [ + [ + 73.365 + ] + ], + [ + [ + 80.053 + ] + ], + [ + [ + 79.996 + ] + ], + [ + [ + 60.066 + ] + ], + [ + [ + 40.728 + ] + ], + [ + [ + 41.627 + ] + ], + [ + [ + 5.186 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 3.263 + ] + ], + [ + [ + 39.004 + ] + ], + [ + [ + 58.26 + ] + ], + [ + [ + 50.412 + ] + ], + [ + [ + 49.591 + ] + ], + [ + [ + 61.527 + ] + ], + [ + [ + 72.96 + ] + ], + [ + [ + 60.65 + ] + ], + [ + [ + 41.599 + ] + ], + [ + [ + 10.932 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 5.697 + ] + ], + [ + [ + 30.045 + ] + ], + [ + [ + 29.681 + ] + ], + [ + [ + 56.252 + ] + ], + [ + [ + 56.252 + ] + ], + [ + [ + 73.966 + ] + ], + [ + [ + 73.101 + ] + ], + [ + [ + 60.527 + ] + ], + [ + [ + 41.133 + ] + ], + [ + [ + 11.171 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 8.639 + ] + ], + [ + [ + 40.084 + ] + ], + [ + [ + 61.564 + ] + ], + [ + [ + 76.487 + ] + ], + [ + [ + 84.305 + ] + ], + [ + [ + 84.578 + ] + ], + [ + [ + 78.174 + ] + ], + [ + [ + 65.253 + ] + ], + [ + [ + 44.658 + ] + ], + [ + [ + 12.953 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ] + ], + "storage_discharge_series_kw": [ + [ + [ + 16.553543950349194 + ] + ], + [ + [ + 16.553543950349194 + ] + ], + [ + [ + 16.553543950349194 + ] + ], + [ + [ + 31.876305895599998 + ] + ], + [ + [ + 31.876305895599998 + ] + ], + [ + [ + 26.47704852075946 + ] + ], + [ + [ + 31.876305895599998 + ] + ], + [ + [ + 25.215782278447378 + ] + ], + [ + [ + 2.24453151044555 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 ] - ] - ], - "has_stacktrace": true, - "warnings": [ + ], [ - "core_electric_utility.jl_187", [ - "When using stochastic outage modeling (i.e. outage_start_time_steps, outage_durations, outage_probabilities), \n emissions and renewable energy percentage calculations and constraints do not consider outages." + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.8641905819693114 + ] + ], + [ + [ + 13.438481755355625 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 31.876305895599998 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 15.938152947799608 + ] + ], + [ + [ + 8.526810074057726 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + -0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 + ] + ], + [ + [ + 0.0 ] ], [ - "core_reopt.jl_641", [ + 0.0 + ] + ] + ], + "microgrid_upgrade_capital_cost": 0.0 + }, + "ElectricStorage": { + "size_kw": 31.88, + "size_kwh": 210.17, + "initial_capital_cost": 124638.15, + "dc_couple_inverter_size_kw": 82.7, + "soc_series_fraction": [ + 0.5, + 0.5, + 0.5, + 0.5, + 0.5, + 0.5, + 0.5, + 0.51, + 0.654, + 0.798, + 0.941, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.354, + 0.497, + 0.641, + 0.785, + 0.929, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.28, + 0.424, + 0.567, + 0.711, + 0.855, + 0.999, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.236, + 0.38, + 0.523, + 0.667, + 0.811, + 0.955, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.356, + 0.5, + 0.643, + 0.787, + 0.931, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.377, + 0.521, + 0.664, + 0.808, + 0.952, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.235, + 0.379, + 0.523, + 0.666, + 0.81, + 0.954, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.282, + 0.425, + 0.569, + 0.713, + 0.857, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.214, + 0.358, + 0.502, + 0.645, + 0.789, + 0.933, + 1.0, + 1.0, + 0.851, + 0.691, + 0.531, + 0.371, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.211, + 0.213, + 0.222, + 0.281, + 0.425, + 0.569, + 0.712, + 0.856, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.232, + 0.376, + 0.519, + 0.663, + 0.807, + 0.951, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.377, + 0.521, + 0.665, + 0.808, + 0.952, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.236, + 0.38, + 0.524, + 0.668, + 0.811, + 0.955, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.216, + 0.359, + 0.503, + 0.647, + 0.791, + 0.912, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.232, + 0.373, + 0.517, + 0.661, + 0.804, + 0.948, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.376, + 0.52, + 0.664, + 0.807, + 0.951, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.226, + 0.332, + 0.448, + 0.591, + 0.735, + 0.879, + 1.0, + 1.0, + 0.922, + 0.762, + 0.602, + 0.442, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.31, + 0.324, + 0.388, + 0.497, + 0.594, + 0.738, + 0.882, + 1.0, + 0.88, + 0.72, + 0.56, + 0.4, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.24, + 0.274, + 0.418, + 0.562, + 0.706, + 0.849, + 0.954, + 0.972, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.272, + 0.416, + 0.559, + 0.703, + 0.847, + 0.991, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.24, + 0.384, + 0.528, + 0.671, + 0.815, + 0.959, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.238, + 0.382, + 0.525, + 0.669, + 0.813, + 0.957, + 1.0, + 1.0, + 1.0, + 0.969, + 0.809, + 0.649, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.489, + 0.495, + 0.55, + 0.611, + 0.703, + 0.795, + 0.892, + 0.973, + 1.0, + 1.0, + 1.0, + 0.869, + 0.709, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.549, + 0.567, + 0.62, + 0.653, + 0.711, + 0.712, + 0.856, + 1.0, + 0.934, + 0.774, + 0.614, + 0.454, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.294, + 0.329, + 0.413, + 0.557, + 0.565, + 0.709, + 0.852, + 0.996, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.244, + 0.388, + 0.532, + 0.676, + 0.819, + 0.963, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.253, + 0.396, + 0.54, + 0.684, + 0.828, + 0.972, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.253, + 0.396, + 0.54, + 0.684, + 0.828, + 0.971, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.216, + 0.36, + 0.503, + 0.647, + 0.791, + 0.935, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.3, + 0.443, + 0.587, + 0.731, + 0.875, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.239, + 0.375, + 0.519, + 0.663, + 0.807, + 0.95, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.256, + 0.399, + 0.543, + 0.687, + 0.831, + 0.975, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.261, + 0.405, + 0.549, + 0.692, + 0.836, + 0.98, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.258, + 0.402, + 0.546, + 0.689, + 0.833, + 0.977, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.213, + 0.289, + 0.418, + 0.561, + 0.705, + 0.849, + 0.993, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.259, + 0.403, + 0.547, + 0.691, + 0.834, + 0.978, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.34, + 0.484, + 0.628, + 0.771, + 0.915, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.292, + 0.42, + 0.55, + 0.654, + 0.797, + 0.941, + 1.0, + 0.908, + 0.748, + 0.588, + 0.428, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.268, + 0.323, + 0.425, + 0.569, + 0.713, + 0.856, + 0.909, + 0.967, + 1.0, + 0.905, + 0.745, + 0.585, + 0.425, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.265, + 0.272, + 0.334, + 0.362, + 0.425, + 0.569, + 0.712, + 0.856, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.344, + 0.488, + 0.631, + 0.775, + 0.919, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.256, + 0.4, + 0.535, + 0.679, + 0.823, + 0.966, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.264, + 0.408, + 0.552, + 0.66, + 0.804, + 0.948, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.269, + 0.413, + 0.557, + 0.701, + 0.844, + 0.988, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.223, + 0.366, + 0.51, + 0.654, + 0.798, + 0.941, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.271, + 0.415, + 0.559, + 0.703, + 0.847, + 0.99, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.27, + 0.413, + 0.557, + 0.701, + 0.845, + 0.988, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.219, + 0.314, + 0.434, + 0.578, + 0.709, + 0.784, + 0.928, + 1.0, + 1.0, + 0.991, + 0.831, + 0.671, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.511, + 0.52, + 0.527, + 0.536, + 0.569, + 0.712, + 0.856, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.273, + 0.416, + 0.56, + 0.704, + 0.848, + 0.991, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.269, + 0.413, + 0.557, + 0.701, + 0.844, + 0.988, + 1.0, + 1.0, + 0.874, + 0.714, + 0.554, + 0.394, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.303, + 0.35, + 0.395, + 0.425, + 0.569, + 0.712, + 0.856, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.283, + 0.426, + 0.57, + 0.714, + 0.858, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.283, + 0.427, + 0.571, + 0.714, + 0.858, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.279, + 0.422, + 0.566, + 0.71, + 0.854, + 0.998, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.277, + 0.421, + 0.565, + 0.708, + 0.852, + 0.996, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.345, + 0.489, + 0.633, + 0.776, + 0.92, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.287, + 0.431, + 0.575, + 0.719, + 0.863, + 1.0, + 1.0, + 1.0, + 0.925, + 0.765, + 0.605, + 0.445, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.285, + 0.294, + 0.395, + 0.475, + 0.588, + 0.731, + 0.756, + 0.899, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.223, + 0.318, + 0.438, + 0.582, + 0.726, + 0.87, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.236, + 0.333, + 0.477, + 0.621, + 0.764, + 0.908, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.283, + 0.427, + 0.571, + 0.715, + 0.858, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.286, + 0.43, + 0.574, + 0.717, + 0.861, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.24, + 0.334, + 0.457, + 0.601, + 0.745, + 0.888, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.293, + 0.437, + 0.58, + 0.724, + 0.868, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.302, + 0.446, + 0.59, + 0.733, + 0.877, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.271, + 0.415, + 0.559, + 0.703, + 0.846, + 0.99, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.299, + 0.428, + 0.571, + 0.715, + 0.859, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.262, + 0.38, + 0.524, + 0.667, + 0.811, + 0.955, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.303, + 0.447, + 0.591, + 0.735, + 0.878, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.303, + 0.447, + 0.59, + 0.734, + 0.878, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.308, + 0.452, + 0.596, + 0.74, + 0.883, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.213, + 0.309, + 0.453, + 0.597, + 0.74, + 0.884, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.213, + 0.303, + 0.447, + 0.591, + 0.735, + 0.879, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.215, + 0.316, + 0.46, + 0.604, + 0.748, + 0.891, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.216, + 0.319, + 0.463, + 0.607, + 0.751, + 0.894, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.217, + 0.32, + 0.464, + 0.608, + 0.752, + 0.895, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.263, + 0.368, + 0.512, + 0.656, + 0.799, + 0.943, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.217, + 0.313, + 0.457, + 0.601, + 0.745, + 0.888, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.217, + 0.31, + 0.453, + 0.597, + 0.741, + 0.885, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.218, + 0.315, + 0.443, + 0.586, + 0.73, + 0.874, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.218, + 0.311, + 0.434, + 0.578, + 0.722, + 0.866, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.219, + 0.313, + 0.456, + 0.6, + 0.744, + 0.888, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.221, + 0.323, + 0.467, + 0.611, + 0.755, + 0.898, + 0.957, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.221, + 0.324, + 0.467, + 0.611, + 0.755, + 0.899, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.221, + 0.32, + 0.464, + 0.607, + 0.751, + 0.895, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.222, + 0.278, + 0.397, + 0.541, + 0.685, + 0.829, + 0.972, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.225, + 0.338, + 0.482, + 0.626, + 0.769, + 0.913, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.225, + 0.33, + 0.474, + 0.618, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.341, + 0.485, + 0.629, + 0.773, + 0.916, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.339, + 0.482, + 0.626, + 0.77, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.226, + 0.331, + 0.474, + 0.618, + 0.762, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.333, + 0.451, + 0.594, + 0.738, + 0.882, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.341, + 0.485, + 0.629, + 0.772, + 0.916, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.23, + 0.344, + 0.488, + 0.631, + 0.775, + 0.919, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.345, + 0.489, + 0.632, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.223, + 0.331, + 0.475, + 0.619, + 0.762, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.377, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.248, + 0.357, + 0.501, + 0.644, + 0.788, + 0.932, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.232, + 0.345, + 0.489, + 0.633, + 0.777, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.312, + 0.416, + 0.56, + 0.607, + 0.75, + 0.894, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.346, + 0.45, + 0.594, + 0.738, + 0.881, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 0.905, + 0.745, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.585, + 0.695, + 0.839, + 0.89, + 0.896, + 0.916, + 0.926, + 0.963, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.224, + 0.345, + 0.489, + 0.632, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.347, + 0.491, + 0.635, + 0.778, + 0.922, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.377, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.218, + 0.251, + 0.363, + 0.506, + 0.65, + 0.794, + 0.938, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.233, + 0.344, + 0.488, + 0.632, + 0.776, + 0.919, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.229, + 0.339, + 0.483, + 0.627, + 0.771, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.235, + 0.346, + 0.49, + 0.634, + 0.778, + 0.921, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.234, + 0.339, + 0.483, + 0.626, + 0.77, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.235, + 0.345, + 0.489, + 0.632, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.235, + 0.343, + 0.487, + 0.631, + 0.775, + 0.918, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.394, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.236, + 0.272, + 0.385, + 0.529, + 0.673, + 0.816, + 0.96, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.226, + 0.337, + 0.48, + 0.624, + 0.768, + 0.893, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.308, + 0.414, + 0.54, + 0.599, + 0.743, + 0.887, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.238, + 0.351, + 0.495, + 0.639, + 0.782, + 0.926, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.24, + 0.357, + 0.501, + 0.645, + 0.789, + 0.932, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.241, + 0.354, + 0.498, + 0.642, + 0.785, + 0.929, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.242, + 0.354, + 0.497, + 0.641, + 0.785, + 0.929, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.412, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.255, + 0.293, + 0.402, + 0.546, + 0.689, + 0.833, + 0.977, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.24, + 0.355, + 0.499, + 0.642, + 0.786, + 0.93, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.241, + 0.352, + 0.496, + 0.639, + 0.783, + 0.927, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.239, + 0.348, + 0.491, + 0.635, + 0.779, + 0.923, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.241, + 0.346, + 0.49, + 0.633, + 0.777, + 0.921, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.243, + 0.354, + 0.497, + 0.641, + 0.785, + 0.929, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.247, + 0.342, + 0.485, + 0.629, + 0.773, + 0.917, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.412, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.259, + 0.302, + 0.417, + 0.504, + 0.648, + 0.792, + 0.936, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.246, + 0.364, + 0.507, + 0.651, + 0.795, + 0.939, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.245, + 0.353, + 0.497, + 0.64, + 0.784, + 0.928, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.25, + 0.359, + 0.502, + 0.646, + 0.79, + 0.934, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.248, + 0.359, + 0.503, + 0.647, + 0.791, + 0.934, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.246, + 0.36, + 0.504, + 0.647, + 0.791, + 0.935, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.248, + 0.372, + 0.516, + 0.659, + 0.803, + 0.947, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.43, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.277, + 0.319, + 0.436, + 0.58, + 0.724, + 0.868, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.252, + 0.367, + 0.511, + 0.655, + 0.799, + 0.942, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.25, + 0.362, + 0.506, + 0.65, + 0.793, + 0.937, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.249, + 0.361, + 0.505, + 0.648, + 0.792, + 0.936, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.246, + 0.36, + 0.504, + 0.648, + 0.792, + 0.935, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.245, + 0.36, + 0.504, + 0.648, + 0.792, + 0.935, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.245, + 0.355, + 0.499, + 0.643, + 0.787, + 0.931, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.43, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.276, + 0.313, + 0.42, + 0.564, + 0.708, + 0.851, + 0.995, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.243, + 0.352, + 0.496, + 0.64, + 0.784, + 0.927, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.244, + 0.349, + 0.492, + 0.636, + 0.78, + 0.924, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.243, + 0.327, + 0.471, + 0.615, + 0.759, + 0.903, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.247, + 0.36, + 0.504, + 0.648, + 0.791, + 0.935, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.251, + 0.363, + 0.507, + 0.651, + 0.794, + 0.938, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.249, + 0.358, + 0.502, + 0.646, + 0.79, + 0.933, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.448, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.295, + 0.333, + 0.441, + 0.584, + 0.728, + 0.872, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.448, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.288, + 0.296, + 0.334, + 0.439, + 0.583, + 0.726, + 0.87, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.245, + 0.351, + 0.495, + 0.639, + 0.783, + 0.926, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.244, + 0.323, + 0.41, + 0.553, + 0.697, + 0.841, + 0.961, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.245, + 0.347, + 0.49, + 0.634, + 0.778, + 0.922, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.242, + 0.324, + 0.397, + 0.541, + 0.685, + 0.829, + 0.972, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.245, + 0.347, + 0.491, + 0.635, + 0.778, + 0.922, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.449, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.297, + 0.332, + 0.433, + 0.577, + 0.721, + 0.865, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.229, + 0.287, + 0.332, + 0.386, + 0.53, + 0.674, + 0.818, + 0.961, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.245, + 0.352, + 0.496, + 0.64, + 0.783, + 0.927, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.246, + 0.361, + 0.504, + 0.648, + 0.792, + 0.936, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.245, + 0.361, + 0.505, + 0.649, + 0.793, + 0.936, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.243, + 0.353, + 0.497, + 0.64, + 0.784, + 0.928, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.243, + 0.349, + 0.493, + 0.637, + 0.78, + 0.924, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.449, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.289, + 0.296, + 0.33, + 0.433, + 0.577, + 0.721, + 0.864, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.244, + 0.35, + 0.494, + 0.638, + 0.781, + 0.925, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.244, + 0.352, + 0.496, + 0.64, + 0.784, + 0.927, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.243, + 0.349, + 0.493, + 0.637, + 0.78, + 0.924, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.243, + 0.345, + 0.488, + 0.632, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.241, + 0.344, + 0.488, + 0.632, + 0.776, + 0.919, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.243, + 0.347, + 0.491, + 0.634, + 0.778, + 0.922, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.467, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.315, + 0.349, + 0.453, + 0.597, + 0.74, + 0.884, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.246, + 0.346, + 0.49, + 0.634, + 0.778, + 0.921, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.242, + 0.342, + 0.486, + 0.63, + 0.773, + 0.917, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.241, + 0.342, + 0.486, + 0.63, + 0.774, + 0.918, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.239, + 0.339, + 0.482, + 0.626, + 0.77, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.238, + 0.337, + 0.481, + 0.625, + 0.769, + 0.912, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.239, + 0.326, + 0.469, + 0.613, + 0.756, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.467, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.315, + 0.347, + 0.437, + 0.581, + 0.725, + 0.868, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.238, + 0.332, + 0.476, + 0.62, + 0.764, + 0.907, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.238, + 0.333, + 0.477, + 0.621, + 0.765, + 0.908, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.24, + 0.341, + 0.485, + 0.629, + 0.772, + 0.916, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.241, + 0.345, + 0.489, + 0.633, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.237, + 0.336, + 0.48, + 0.624, + 0.768, + 0.912, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.235, + 0.337, + 0.481, + 0.625, + 0.768, + 0.912, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.466, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.311, + 0.341, + 0.444, + 0.587, + 0.731, + 0.875, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.235, + 0.337, + 0.481, + 0.625, + 0.769, + 0.912, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.234, + 0.333, + 0.477, + 0.621, + 0.764, + 0.908, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.467, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.307, + 0.314, + 0.344, + 0.435, + 0.579, + 0.723, + 0.867, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.243, + 0.333, + 0.477, + 0.621, + 0.764, + 0.908, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.236, + 0.331, + 0.475, + 0.619, + 0.762, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.234, + 0.331, + 0.474, + 0.618, + 0.762, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.466, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.312, + 0.341, + 0.436, + 0.58, + 0.724, + 0.868, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.231, + 0.308, + 0.37, + 0.514, + 0.657, + 0.801, + 0.945, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.208, + 0.239, + 0.336, + 0.48, + 0.623, + 0.767, + 0.911, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.234, + 0.332, + 0.476, + 0.62, + 0.764, + 0.907, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.232, + 0.33, + 0.474, + 0.617, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.223, + 0.299, + 0.416, + 0.56, + 0.662, + 0.796, + 0.93, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.228, + 0.318, + 0.462, + 0.606, + 0.75, + 0.893, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.466, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.311, + 0.338, + 0.43, + 0.574, + 0.718, + 0.861, + 1.0, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.231, + 0.328, + 0.472, + 0.616, + 0.759, + 0.903, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.231, + 0.329, + 0.473, + 0.616, + 0.76, + 0.904, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.231, + 0.327, + 0.471, + 0.615, + 0.758, + 0.902, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.23, + 0.328, + 0.472, + 0.615, + 0.759, + 0.903, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.231, + 0.327, + 0.471, + 0.614, + 0.758, + 0.902, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.231, + 0.323, + 0.466, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.992, + 0.832, + 0.672, + 0.599, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.439, + 0.44, + 0.458, + 0.478, + 0.496, + 0.64, + 0.784, + 0.928, + 0.945, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.231, + 0.321, + 0.465, + 0.608, + 0.752, + 0.896, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.229, + 0.322, + 0.466, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.229, + 0.323, + 0.467, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.23, + 0.321, + 0.465, + 0.609, + 0.753, + 0.897, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.23, + 0.323, + 0.467, + 0.611, + 0.755, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.229, + 0.323, + 0.467, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.447, + 0.287, + 0.287, + 0.287, + 0.287, + 0.287, + 0.287, + 0.287, + 0.287, + 0.287, + 0.287, + 0.291, + 0.317, + 0.41, + 0.554, + 0.698, + 0.842, + 0.986, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.23, + 0.322, + 0.466, + 0.609, + 0.753, + 0.897, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.215, + 0.217, + 0.343, + 0.487, + 0.631, + 0.775, + 0.919, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.23, + 0.322, + 0.466, + 0.61, + 0.754, + 0.897, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.229, + 0.324, + 0.467, + 0.611, + 0.755, + 0.899, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.23, + 0.323, + 0.467, + 0.611, + 0.755, + 0.899, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.232, + 0.326, + 0.47, + 0.614, + 0.757, + 0.901, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.43, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.27, + 0.272, + 0.3, + 0.402, + 0.546, + 0.69, + 0.833, + 0.977, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.229, + 0.33, + 0.474, + 0.617, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.229, + 0.331, + 0.475, + 0.619, + 0.762, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.229, + 0.33, + 0.474, + 0.617, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.329, + 0.473, + 0.617, + 0.76, + 0.904, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.202, + 0.229, + 0.329, + 0.473, + 0.617, + 0.76, + 0.904, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.325, + 0.469, + 0.612, + 0.756, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.429, + 0.269, + 0.269, + 0.269, + 0.269, + 0.269, + 0.269, + 0.269, + 0.269, + 0.269, + 0.269, + 0.271, + 0.297, + 0.393, + 0.537, + 0.681, + 0.824, + 0.968, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.227, + 0.322, + 0.466, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.323, + 0.467, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.323, + 0.466, + 0.61, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.322, + 0.466, + 0.61, + 0.753, + 0.897, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.325, + 0.468, + 0.612, + 0.756, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.227, + 0.328, + 0.472, + 0.616, + 0.759, + 0.903, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.412, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.252, + 0.281, + 0.384, + 0.528, + 0.672, + 0.816, + 0.959, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.228, + 0.33, + 0.473, + 0.617, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.228, + 0.329, + 0.472, + 0.616, + 0.76, + 0.904, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.334, + 0.477, + 0.621, + 0.765, + 0.909, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.331, + 0.475, + 0.619, + 0.763, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.323, + 0.467, + 0.611, + 0.754, + 0.898, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.32, + 0.464, + 0.608, + 0.751, + 0.895, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.394, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.234, + 0.261, + 0.357, + 0.501, + 0.645, + 0.788, + 0.932, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.326, + 0.47, + 0.613, + 0.757, + 0.901, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.325, + 0.469, + 0.613, + 0.757, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.309, + 0.453, + 0.596, + 0.74, + 0.884, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.32, + 0.463, + 0.607, + 0.751, + 0.895, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.333, + 0.477, + 0.62, + 0.764, + 0.908, + 1.0, + 1.0, + 1.0, + 0.843, + 0.683, + 0.523, + 0.363, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.203, + 0.233, + 0.338, + 0.481, + 0.625, + 0.769, + 0.913, + 0.972, + 0.978, + 0.983, + 0.823, + 0.663, + 0.503, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.33, + 0.474, + 0.618, + 0.762, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.377, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.246, + 0.348, + 0.492, + 0.636, + 0.78, + 0.924, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.228, + 0.328, + 0.472, + 0.616, + 0.759, + 0.903, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.228, + 0.328, + 0.472, + 0.616, + 0.76, + 0.903, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.33, + 0.474, + 0.618, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.341, + 0.485, + 0.628, + 0.772, + 0.916, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.232, + 0.343, + 0.487, + 0.631, + 0.775, + 0.918, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.339, + 0.483, + 0.626, + 0.77, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.339, + 0.483, + 0.627, + 0.771, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.23, + 0.336, + 0.479, + 0.623, + 0.767, + 0.911, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.332, + 0.476, + 0.62, + 0.764, + 0.907, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.321, + 0.465, + 0.609, + 0.753, + 0.897, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.232, + 0.347, + 0.491, + 0.635, + 0.779, + 0.922, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.356, + 0.5, + 0.643, + 0.787, + 0.931, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.354, + 0.498, + 0.641, + 0.785, + 0.929, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.349, + 0.493, + 0.637, + 0.78, + 0.924, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.339, + 0.483, + 0.626, + 0.77, + 0.914, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.351, + 0.495, + 0.639, + 0.783, + 0.926, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.346, + 0.49, + 0.634, + 0.777, + 0.921, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.228, + 0.33, + 0.473, + 0.617, + 0.761, + 0.905, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.355, + 0.499, + 0.643, + 0.786, + 0.93, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.353, + 0.497, + 0.641, + 0.785, + 0.928, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.352, + 0.496, + 0.639, + 0.783, + 0.927, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.341, + 0.485, + 0.629, + 0.773, + 0.917, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.35, + 0.494, + 0.637, + 0.781, + 0.925, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.224, + 0.325, + 0.468, + 0.612, + 0.756, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.23, + 0.338, + 0.482, + 0.626, + 0.769, + 0.913, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.23, + 0.34, + 0.484, + 0.627, + 0.771, + 0.915, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.341, + 0.485, + 0.628, + 0.772, + 0.916, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.214, + 0.31, + 0.454, + 0.598, + 0.742, + 0.886, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.23, + 0.341, + 0.484, + 0.628, + 0.772, + 0.916, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.228, + 0.34, + 0.484, + 0.628, + 0.772, + 0.915, + 1.0, + 1.0, + 1.0, + 0.857, + 0.697, + 0.537, + 0.377, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.217, + 0.242, + 0.258, + 0.333, + 0.476, + 0.597, + 0.741, + 0.884, + 0.93, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.357, + 0.501, + 0.644, + 0.788, + 0.932, + 0.963, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.233, + 0.355, + 0.499, + 0.643, + 0.787, + 0.93, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.35, + 0.494, + 0.638, + 0.781, + 0.925, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.231, + 0.351, + 0.494, + 0.638, + 0.782, + 0.926, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.345, + 0.489, + 0.632, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.344, + 0.488, + 0.632, + 0.776, + 0.919, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.23, + 0.348, + 0.491, + 0.635, + 0.779, + 0.923, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.347, + 0.49, + 0.634, + 0.778, + 0.922, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.342, + 0.486, + 0.63, + 0.773, + 0.917, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.225, + 0.324, + 0.468, + 0.611, + 0.755, + 0.899, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.226, + 0.337, + 0.481, + 0.625, + 0.769, + 0.912, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.226, + 0.343, + 0.486, + 0.63, + 0.774, + 0.918, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.227, + 0.345, + 0.488, + 0.632, + 0.776, + 0.92, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.224, + 0.34, + 0.483, + 0.627, + 0.771, + 0.915, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.221, + 0.335, + 0.478, + 0.622, + 0.766, + 0.91, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.219, + 0.332, + 0.475, + 0.619, + 0.763, + 0.907, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.218, + 0.332, + 0.476, + 0.619, + 0.763, + 0.907, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.218, + 0.331, + 0.475, + 0.619, + 0.763, + 0.906, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.213, + 0.315, + 0.459, + 0.603, + 0.746, + 0.89, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.313, + 0.457, + 0.6, + 0.744, + 0.888, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.316, + 0.46, + 0.603, + 0.747, + 0.891, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.214, + 0.334, + 0.478, + 0.622, + 0.765, + 0.909, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.213, + 0.332, + 0.476, + 0.62, + 0.764, + 0.907, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.212, + 0.327, + 0.471, + 0.615, + 0.758, + 0.902, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.211, + 0.325, + 0.469, + 0.613, + 0.756, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.21, + 0.322, + 0.466, + 0.61, + 0.754, + 0.897, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.209, + 0.318, + 0.462, + 0.606, + 0.75, + 0.893, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.31, + 0.454, + 0.598, + 0.741, + 0.885, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.206, + 0.325, + 0.469, + 0.612, + 0.756, + 0.9, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.205, + 0.32, + 0.463, + 0.607, + 0.751, + 0.895, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.204, + 0.312, + 0.455, + 0.599, + 0.743, + 0.887, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.308, + 0.452, + 0.596, + 0.74, + 0.884, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.203, + 0.309, + 0.452, + 0.596, + 0.74, + 0.884, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.305, + 0.448, + 0.592, + 0.736, + 0.88, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.201, + 0.302, + 0.446, + 0.59, + 0.734, + 0.877, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.303, + 0.447, + 0.591, + 0.735, + 0.879, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.281, + 0.425, + 0.568, + 0.712, + 0.856, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.282, + 0.381, + 0.524, + 0.668, + 0.812, + 0.956, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.235, + 0.337, + 0.48, + 0.624, + 0.768, + 0.912, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.207, + 0.351, + 0.488, + 0.631, + 0.775, + 0.919, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.289, + 0.433, + 0.577, + 0.721, + 0.864, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.306, + 0.449, + 0.593, + 0.737, + 0.881, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.299, + 0.443, + 0.587, + 0.731, + 0.875, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.235, + 0.347, + 0.491, + 0.635, + 0.778, + 0.904, + 0.994, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.287, + 0.367, + 0.511, + 0.654, + 0.798, + 0.857, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.291, + 0.435, + 0.579, + 0.722, + 0.866, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.288, + 0.431, + 0.575, + 0.719, + 0.863, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.338, + 0.481, + 0.625, + 0.769, + 0.913, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.29, + 0.433, + 0.577, + 0.721, + 0.865, + 1.0, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.373, + 0.516, + 0.66, + 0.804, + 0.948, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.373, + 0.516, + 0.66, + 0.804, + 0.948, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.232, + 0.376, + 0.519, + 0.663, + 0.807, + 0.951, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.223, + 0.318, + 0.462, + 0.605, + 0.749, + 0.893, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.224, + 0.324, + 0.468, + 0.611, + 0.755, + 0.899, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.272, + 0.416, + 0.56, + 0.704, + 0.847, + 0.991, + 1.0, + 1.0, + 1.0, + 1.0, + 1.0, + 0.957, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.797, + 0.802, + 0.853, + 0.93, + 0.934, + 0.954, + 0.962, + 0.972, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.264, + 0.407, + 0.551, + 0.695, + 0.839, + 0.982, + 1.0, + 1.0, + 0.976, + 0.816, + 0.656, + 0.496, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.336, + 0.349, + 0.378, + 0.404, + 0.445, + 0.588, + 0.725, + 0.868, + 1.0, + 0.946, + 0.786, + 0.626, + 0.466, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.306, + 0.367, + 0.369, + 0.513, + 0.637, + 0.781, + 0.925, + 0.999, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.263, + 0.407, + 0.551, + 0.695, + 0.839, + 0.982, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.263, + 0.407, + 0.551, + 0.695, + 0.838, + 0.982, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.26, + 0.403, + 0.547, + 0.691, + 0.835, + 0.978, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.26, + 0.404, + 0.547, + 0.691, + 0.835, + 0.979, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.258, + 0.402, + 0.546, + 0.689, + 0.833, + 0.977, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.255, + 0.398, + 0.542, + 0.686, + 0.83, + 0.973, + 1.0, + 1.0, + 0.922, + 0.762, + 0.602, + 0.442, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.282, + 0.333, + 0.476, + 0.62, + 0.754, + 0.898, + 0.906, + 0.976, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.253, + 0.397, + 0.541, + 0.685, + 0.828, + 0.972, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.253, + 0.397, + 0.541, + 0.685, + 0.828, + 0.972, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.249, + 0.323, + 0.467, + 0.611, + 0.754, + 0.898, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.243, + 0.325, + 0.468, + 0.612, + 0.756, + 0.9, + 0.923, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.247, + 0.391, + 0.535, + 0.679, + 0.822, + 0.966, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.249, + 0.393, + 0.536, + 0.68, + 0.824, + 0.968, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.234, + 0.257, + 0.401, + 0.544, + 0.688, + 0.832, + 0.976, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.245, + 0.389, + 0.532, + 0.676, + 0.82, + 0.964, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.243, + 0.386, + 0.53, + 0.674, + 0.818, + 0.961, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.214, + 0.284, + 0.393, + 0.537, + 0.681, + 0.825, + 0.968, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.238, + 0.382, + 0.525, + 0.669, + 0.813, + 0.957, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.239, + 0.382, + 0.526, + 0.67, + 0.814, + 0.957, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.237, + 0.381, + 0.525, + 0.669, + 0.812, + 0.956, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.241, + 0.385, + 0.529, + 0.672, + 0.816, + 0.96, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.24, + 0.384, + 0.528, + 0.671, + 0.815, + 0.959, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.237, + 0.38, + 0.524, + 0.668, + 0.812, + 0.955, + 1.0, + 1.0, + 0.924, + 0.764, + 0.604, + 0.444, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.284, + 0.29, + 0.329, + 0.383, + 0.497, + 0.641, + 0.785, + 0.926, + 1.0, + 1.0, + 0.987, + 0.827, + 0.667, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.507, + 0.509, + 0.604, + 0.748, + 0.863, + 0.912, + 0.957, + 0.97, + 1.0, + 1.0, + 1.0, + 1.0, + 0.851, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.691, + 0.696, + 0.698, + 0.752, + 0.776, + 0.814, + 0.828, + 0.861, + 1.0, + 1.0, + 1.0, + 1.0, + 0.863, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.703, + 0.732, + 0.744, + 0.821, + 0.836, + 0.883, + 0.931, + 0.972, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2, + 0.229, + 0.369, + 0.513, + 0.657, + 0.8, + 0.944, + 1.0, + 1.0, + 0.84, + 0.68, + 0.52, + 0.36, + 0.2, + 0.2, + 0.2, + 0.2, + 0.2 + ], + "storage_to_load_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 29.636, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.58, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 23.941, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.126, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 26.115, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 13.14, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 18.269, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 18.993, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.803, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 25.119, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.04, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 28.45, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 18.869, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 28.45, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 25.024, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 21.597, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 21.541, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 18.015, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 17.961, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 14.385, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 14.378, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 14.195, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 14.144, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 10.564, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 10.598, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 10.802, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 10.601, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 10.812, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 10.749, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.63, + 31.876, + 31.876, + 14.412, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 14.465, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 17.987, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 18.086, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 21.597, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 25.024, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.203, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 28.45, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 28.45, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 28.476, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.532, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.77, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 10.661, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.585, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.081, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.56, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 29.663, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 27.283, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + -0.0 + ] + }, + "status": "optimal", + "solver_seconds": 5.603, + "ElectricUtility": { + "lifecycle_emissions_tonnes_CO2_bau": 911.04, + "annual_emissions_tonnes_CO2_bau": 36.4416, + "lifecycle_emissions_tonnes_PM25": 0.36, + "annual_energy_supplied_kwh_bau": 1.0054267e6, + "lifecycle_emissions_tonnes_PM25_bau": 0.39, + "lifecycle_emissions_tonnes_SO2": 0.33, + "annual_emissions_tonnes_SO2_bau": 0.0148, + "electric_to_load_series_kw": [ + 31.876, + 31.876, + 31.876, + 32.165, + 32.388, + 32.759, + 32.725, + 12.575, + 73.11, + 63.72, + 111.297, + 90.255, + 113.198, + 116.304, + 122.103, + 98.833, + 115.351, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.869, + 79.217, + 142.417, + 199.573, + 194.506, + 192.324, + 192.813, + 180.031, + 170.021, + 146.76, + 167.355, + 184.831, + 136.613, + 136.616, + 150.852, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.547, + 79.191, + 137.719, + 199.706, + 193.94, + 191.367, + 191.818, + 194.907, + 169.273, + 145.937, + 163.221, + 184.831, + 136.641, + 136.845, + 151.093, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.658, + 81.787, + 142.648, + 199.388, + 194.189, + 192.063, + 192.573, + 173.826, + 169.627, + 178.181, + 195.171, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.407, + 77.017, + 112.15, + 169.597, + 164.427, + 162.144, + 162.643, + 171.571, + 180.023, + 147.39, + 166.027, + 185.484, + 137.388, + 137.517, + 151.75, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 32.132, + 32.88, + 32.841, + 33.064, + 71.197, + 62.768, + 108.679, + 152.989, + 205.92, + 206.866, + 201.716, + 180.428, + 170.533, + 146.785, + 163.131, + 184.831, + 118.899, + 83.472, + 115.368, + 80.213, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 32.031, + 32.061, + 32.114, + 14.615, + 73.449, + 64.789, + 112.81, + 110.403, + 146.014, + 127.473, + 122.371, + 98.772, + 114.821, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.587, + 81.715, + 143.041, + 199.466, + 193.879, + 191.253, + 191.631, + 173.07, + 168.583, + 145.504, + 162.299, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.617, + 78.905, + 137.236, + 200.016, + 194.96, + 192.632, + 193.009, + 195.752, + 169.559, + 145.968, + 162.067, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.299, + 79.241, + 142.978, + 200.593, + 200.37, + 203.665, + 199.795, + 192.035, + 178.183, + 156.707, + 166.795, + 184.881, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.17, + 78.132, + 131.441, + 201.548, + 197.855, + 194.809, + 202.002, + 204.154, + 202.425, + 148.339, + 162.106, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.145, + 80.844, + 143.659, + 201.041, + 195.666, + 193.139, + 193.428, + 175.484, + 169.984, + 146.183, + 161.623, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.872, + 63.241, + 108.101, + 153.007, + 196.36, + 194.744, + 197.657, + 182.89, + 179.961, + 152.374, + 161.746, + 186.084, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.849, + 71.84, + 63.377, + 111.493, + 118.587, + 159.772, + 140.014, + 129.983, + 105.75, + 111.359, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 12.811, + 74.153, + 65.414, + 121.732, + 117.58, + 159.149, + 136.545, + 137.751, + 114.836, + 115.228, + 101.185, + 65.78, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 72.055, + 81.543, + 144.186, + 201.719, + 196.16, + 193.388, + 193.44, + 175.715, + 169.551, + 145.97, + 157.662, + 184.831, + 136.613, + 136.613, + 150.785, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 72.113, + 82.001, + 145.256, + 203.221, + 198.08, + 194.936, + 202.225, + 176.299, + 170.686, + 146.793, + 158.234, + 185.772, + 137.705, + 137.733, + 151.814, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.148, + 33.158, + 33.216, + 72.404, + 81.07, + 140.715, + 207.003, + 203.144, + 200.842, + 201.761, + 205.999, + 180.379, + 173.387, + 163.409, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.35, + 80.521, + 131.453, + 201.99, + 206.137, + 205.01, + 194.142, + 196.574, + 207.31, + 160.034, + 163.418, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.942, + 32.204, + 32.265, + 32.304, + 70.631, + 63.94, + 109.033, + 152.814, + 195.753, + 192.941, + 205.652, + 197.767, + 198.544, + 163.914, + 163.745, + 184.831, + 118.899, + 83.472, + 115.348, + 79.969, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 32.186, + 32.412, + 32.572, + 32.831, + 13.001, + 65.917, + 71.332, + 118.973, + 117.874, + 152.522, + 159.243, + 134.393, + 100.995, + 108.417, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.244, + 33.107, + 71.731, + 82.197, + 143.499, + 201.284, + 196.18, + 193.306, + 193.219, + 173.104, + 169.212, + 145.126, + 156.622, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.252, + 33.274, + 71.623, + 81.829, + 144.287, + 201.757, + 206.599, + 201.207, + 204.881, + 184.362, + 176.465, + 183.93, + 188.069, + 184.845, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.536, + 78.214, + 135.358, + 201.612, + 206.589, + 209.321, + 209.491, + 217.231, + 219.764, + 212.548, + 204.153, + 190.298, + 138.73, + 138.619, + 152.783, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.007, + 77.277, + 131.757, + 200.925, + 200.959, + 217.074, + 224.38, + 229.497, + 239.5, + 203.918, + 189.423, + 203.469, + 148.371, + 139.821, + 152.829, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.525, + 80.529, + 138.115, + 208.109, + 204.64, + 225.008, + 238.408, + 252.749, + 240.697, + 177.861, + 174.342, + 192.748, + 148.007, + 141.976, + 153.127, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 65.393, + 63.785, + 106.741, + 150.148, + 192.182, + 200.395, + 218.99, + 198.779, + 190.828, + 159.146, + 160.663, + 183.492, + 119.125, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 16.512, + 70.807, + 61.807, + 109.45, + 109.62, + 146.079, + 123.02, + 122.197, + 97.656, + 107.988, + 97.759, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.545, + 82.9, + 141.933, + 199.542, + 194.564, + 192.323, + 192.612, + 177.323, + 172.438, + 152.694, + 161.135, + 181.404, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.015, + 79.559, + 143.537, + 200.486, + 201.175, + 199.115, + 199.639, + 185.384, + 174.898, + 149.449, + 159.727, + 181.404, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.134, + 78.18, + 131.509, + 204.58, + 208.545, + 190.75, + 190.734, + 193.23, + 194.613, + 143.179, + 156.392, + 181.404, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.59, + 81.668, + 143.785, + 201.939, + 196.594, + 193.935, + 193.466, + 174.679, + 168.321, + 144.214, + 155.73, + 181.404, + 136.613, + 136.613, + 150.829, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.73, + 83.473, + 142.281, + 199.182, + 199.39, + 198.037, + 199.967, + 167.803, + 167.479, + 143.258, + 154.173, + 181.404, + 136.728, + 136.928, + 151.24, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 32.006, + 67.647, + 66.854, + 106.542, + 150.935, + 194.003, + 191.456, + 191.639, + 166.93, + 167.523, + 143.269, + 154.053, + 177.978, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.949, + 28.668, + 17.268, + 72.36, + 63.234, + 110.933, + 108.373, + 143.88, + 119.843, + 119.794, + 95.485, + 106.159, + 94.333, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.128, + 79.148, + 137.677, + 208.065, + 202.15, + 199.941, + 202.38, + 206.663, + 177.19, + 152.004, + 160.427, + 177.978, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.707, + 83.867, + 143.486, + 201.235, + 195.809, + 192.9, + 192.57, + 173.117, + 173.253, + 147.552, + 157.748, + 177.978, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.924, + 81.022, + 140.83, + 207.953, + 203.635, + 198.278, + 204.604, + 193.065, + 179.162, + 149.024, + 158.463, + 177.978, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.02, + 80.433, + 136.75, + 208.248, + 208.07, + 205.533, + 204.4, + 202.938, + 194.541, + 165.313, + 160.607, + 177.978, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.812, + 83.695, + 140.261, + 208.363, + 207.295, + 201.679, + 200.738, + 202.193, + 202.698, + 178.008, + 167.91, + 179.554, + 136.756, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 62.819, + 60.345, + 100.517, + 150.398, + 210.112, + 223.964, + 225.248, + 222.774, + 226.555, + 166.706, + 178.196, + 186.818, + 121.135, + 84.248, + 115.542, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.318, + 72.191, + 63.394, + 111.251, + 109.054, + 145.63, + 136.431, + 125.924, + 103.285, + 112.355, + 96.512, + 65.808, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.44, + 82.589, + 143.568, + 215.129, + 216.302, + 224.958, + 235.161, + 220.822, + 212.766, + 182.892, + 193.23, + 193.031, + 140.132, + 138.965, + 152.421, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.389, + 83.404, + 142.226, + 200.13, + 219.369, + 222.596, + 219.988, + 198.007, + 191.31, + 171.36, + 174.016, + 183.779, + 139.715, + 138.601, + 151.9, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.537, + 84.014, + 141.445, + 198.788, + 192.986, + 190.433, + 190.947, + 164.59, + 167.217, + 143.149, + 154.033, + 175.238, + 136.758, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.558, + 79.576, + 141.312, + 199.15, + 194.112, + 191.488, + 191.517, + 175.347, + 167.439, + 143.144, + 153.467, + 174.552, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.161, + 84.814, + 142.401, + 199.797, + 194.44, + 191.764, + 191.724, + 164.511, + 167.344, + 143.128, + 153.965, + 174.942, + 137.07, + 137.197, + 151.421, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 64.059, + 67.638, + 107.353, + 151.345, + 194.134, + 191.471, + 191.577, + 164.847, + 167.509, + 146.966, + 162.039, + 174.552, + 118.899, + 83.472, + 115.357, + 80.121, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 13.017, + 69.009, + 70.418, + 123.792, + 124.469, + 154.56, + 158.648, + 142.833, + 132.155, + 138.999, + 90.906, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.318, + 61.442, + 60.707, + 113.702, + 115.913, + 153.428, + 157.776, + 150.857, + 94.622, + 105.175, + 90.675, + 66.024, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.194, + 33.723, + 33.906, + 62.098, + 85.642, + 142.245, + 199.723, + 194.618, + 191.826, + 191.625, + 163.899, + 166.68, + 142.561, + 152.924, + 174.156, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.407, + 33.466, + 61.664, + 84.726, + 142.532, + 200.81, + 195.826, + 192.635, + 192.036, + 164.748, + 166.765, + 149.093, + 152.776, + 174.065, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.069, + 84.497, + 134.684, + 200.033, + 198.779, + 205.54, + 200.684, + 203.101, + 208.902, + 149.586, + 157.399, + 174.466, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.098, + 85.701, + 139.652, + 196.666, + 190.965, + 189.978, + 189.667, + 158.558, + 163.57, + 139.951, + 151.427, + 174.203, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 59.852, + 68.005, + 104.478, + 149.53, + 192.6, + 190.655, + 190.897, + 162.373, + 166.882, + 141.827, + 152.07, + 170.76, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 18.821, + 70.342, + 61.666, + 109.077, + 106.606, + 142.051, + 121.645, + 143.016, + 114.54, + 113.557, + 86.847, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.03, + 85.129, + 141.079, + 199.015, + 193.495, + 190.546, + 190.36, + 161.792, + 165.842, + 141.57, + 152.328, + 170.254, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.179, + 33.342, + 58.029, + 78.084, + 139.91, + 197.066, + 199.042, + 198.36, + 189.984, + 176.456, + 164.161, + 162.307, + 161.897, + 171.023, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.252, + 58.042, + 86.492, + 139.375, + 196.53, + 190.99, + 189.93, + 188.555, + 158.531, + 163.797, + 156.84, + 163.963, + 170.484, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 58.026, + 78.828, + 139.598, + 203.315, + 206.246, + 205.712, + 198.234, + 206.408, + 205.234, + 160.443, + 158.744, + 171.125, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.95, + 79.644, + 139.084, + 207.026, + 208.018, + 202.205, + 206.403, + 204.876, + 182.155, + 154.911, + 160.267, + 171.125, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 56.059, + 63.113, + 103.629, + 159.725, + 199.442, + 199.248, + 203.684, + 202.304, + 194.976, + 166.296, + 169.581, + 173.922, + 119.409, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.315, + 18.957, + 70.104, + 71.097, + 118.13, + 124.879, + 171.335, + 146.489, + 148.945, + 114.798, + 116.278, + 86.899, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.699, + 85.318, + 141.092, + 199.933, + 194.938, + 204.539, + 190.965, + 162.386, + 172.464, + 142.756, + 158.563, + 170.137, + 136.903, + 137.073, + 151.312, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 57.85, + 81.882, + 139.641, + 207.389, + 194.632, + 192.19, + 199.486, + 186.849, + 167.059, + 142.827, + 152.838, + 169.952, + 136.613, + 136.637, + 150.902, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 54.407, + 85.989, + 140.099, + 197.735, + 199.192, + 197.623, + 198.415, + 169.386, + 170.831, + 146.615, + 152.019, + 170.781, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 54.393, + 86.265, + 138.709, + 196.626, + 191.562, + 190.025, + 185.472, + 160.591, + 165.665, + 141.403, + 154.486, + 166.664, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.559, + 83.687, + 139.841, + 198.135, + 193.276, + 191.406, + 192.443, + 165.939, + 167.925, + 147.64, + 155.089, + 166.32, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 53.211, + 68.304, + 106.872, + 150.064, + 193.189, + 190.775, + 190.411, + 161.543, + 166.711, + 142.293, + 152.462, + 166.162, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 15.483, + 65.045, + 70.101, + 113.317, + 115.009, + 151.327, + 148.621, + 132.389, + 125.401, + 101.669, + 71.86, + 47.494, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.58, + 81.952, + 139.147, + 204.994, + 197.179, + 191.951, + 190.001, + 185.178, + 160.882, + 166.113, + 141.824, + 152.202, + 117.772, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.114, + 82.359, + 139.256, + 205.441, + 197.67, + 192.625, + 190.141, + 185.279, + 160.858, + 166.086, + 141.7, + 152.005, + 117.662, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.056, + 82.479, + 139.428, + 205.145, + 198.016, + 193.609, + 191.415, + 185.527, + 161.904, + 166.616, + 142.033, + 152.139, + 117.651, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.766, + 79.685, + 139.83, + 204.831, + 197.222, + 192.036, + 189.993, + 184.006, + 160.963, + 166.366, + 142.055, + 152.2, + 117.663, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.75, + 79.565, + 139.187, + 206.014, + 199.425, + 194.827, + 193.099, + 187.485, + 162.463, + 166.954, + 142.084, + 151.992, + 117.568, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.962, + 61.823, + 104.466, + 155.962, + 196.592, + 191.402, + 189.826, + 182.111, + 159.927, + 165.075, + 143.475, + 155.216, + 100.228, + 83.472, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 12.806, + 69.486, + 66.959, + 112.26, + 107.316, + 141.585, + 133.251, + 112.36, + 117.406, + 93.09, + 67.842, + 46.538, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.432, + 79.719, + 140.167, + 203.672, + 196.209, + 191.29, + 189.849, + 181.298, + 161.131, + 166.474, + 141.92, + 151.81, + 117.42, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.716, + 79.048, + 136.039, + 205.675, + 200.138, + 197.071, + 198.588, + 198.891, + 181.127, + 175.798, + 142.414, + 152.211, + 114.054, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.388, + 79.734, + 139.762, + 205.814, + 198.774, + 194.368, + 192.018, + 184.62, + 161.901, + 166.916, + 142.946, + 153.159, + 114.658, + 137.367, + 119.8, + 60.908, + 33.107, + 33.107, + 33.107, + 33.232, + 33.608, + 33.8, + 34.179, + 34.375, + 69.002, + 80.844, + 139.985, + 206.509, + 199.301, + 195.593, + 193.626, + 186.612, + 162.646, + 167.041, + 142.459, + 152.406, + 114.065, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.216, + 80.007, + 139.618, + 207.755, + 206.098, + 195.779, + 197.955, + 194.798, + 169.912, + 171.861, + 143.287, + 155.927, + 114.534, + 136.613, + 118.932, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.844, + 62.159, + 103.927, + 159.127, + 202.639, + 193.872, + 191.939, + 190.269, + 163.411, + 176.159, + 145.834, + 155.519, + 96.415, + 83.472, + 83.472, + 79.955, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 12.926, + 68.974, + 69.424, + 115.453, + 109.9, + 142.789, + 135.859, + 118.088, + 119.174, + 94.58, + 68.963, + 43.193, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.626, + 79.675, + 139.645, + 204.195, + 196.921, + 195.81, + 196.863, + 209.073, + 192.447, + 182.425, + 158.123, + 162.537, + 115.232, + 136.756, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.543, + 79.673, + 139.869, + 204.323, + 197.082, + 192.73, + 190.737, + 181.019, + 161.229, + 166.283, + 142.087, + 159.084, + 113.905, + 136.613, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.544, + 79.724, + 139.3, + 205.505, + 198.871, + 196.76, + 211.124, + 205.408, + 184.418, + 185.902, + 152.136, + 156.196, + 115.107, + 136.708, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.492, + 79.629, + 135.293, + 206.876, + 199.229, + 200.576, + 207.46, + 218.155, + 191.679, + 185.608, + 161.532, + 169.55, + 118.686, + 138.139, + 119.739, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.478, + 79.52, + 140.276, + 202.702, + 195.911, + 202.661, + 217.39, + 212.731, + 194.066, + 192.507, + 161.755, + 166.798, + 118.606, + 137.719, + 119.263, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 62.392, + 61.747, + 104.162, + 155.978, + 208.606, + 219.644, + 223.298, + 211.503, + 195.125, + 204.356, + 177.091, + 189.149, + 104.369, + 84.168, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 13.558, + 70.094, + 65.624, + 111.259, + 106.26, + 141.16, + 127.962, + 110.967, + 116.606, + 92.595, + 67.853, + 42.857, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.441, + 80.345, + 140.716, + 203.316, + 196.175, + 191.763, + 189.995, + 178.025, + 167.727, + 166.623, + 142.099, + 152.022, + 113.762, + 133.186, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.438, + 80.256, + 139.934, + 209.017, + 204.546, + 195.833, + 193.401, + 181.929, + 163.038, + 167.486, + 142.85, + 152.471, + 113.776, + 133.186, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.356, + 80.258, + 139.978, + 206.585, + 202.657, + 193.167, + 190.678, + 184.933, + 161.262, + 166.329, + 141.85, + 152.037, + 113.661, + 133.186, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.303, + 80.336, + 140.588, + 202.871, + 195.358, + 190.866, + 189.516, + 176.306, + 159.697, + 165.198, + 150.543, + 151.969, + 113.565, + 133.186, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.61, + 80.287, + 140.487, + 202.712, + 195.357, + 190.344, + 189.486, + 175.721, + 160.265, + 165.654, + 141.601, + 151.961, + 113.545, + 133.186, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 59.181, + 62.485, + 104.999, + 154.831, + 196.096, + 191.975, + 190.388, + 177.087, + 162.149, + 167.106, + 142.476, + 152.382, + 96.11, + 80.117, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 13.217, + 68.973, + 67.732, + 116.473, + 124.241, + 165.654, + 153.403, + 134.964, + 140.619, + 114.904, + 77.741, + 44.233, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.012, + 79.864, + 139.787, + 204.38, + 198.507, + 198.206, + 195.778, + 178.931, + 166.388, + 171.458, + 147.171, + 157.988, + 115.63, + 133.857, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.309, + 80.082, + 140.272, + 203.418, + 196.676, + 193.278, + 195.433, + 178.982, + 164.244, + 169.612, + 145.102, + 154.991, + 115.66, + 134.064, + 119.02, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.172, + 77.482, + 140.107, + 205.355, + 196.139, + 200.18, + 208.838, + 191.823, + 204.388, + 200.752, + 197.424, + 219.175, + 163.69, + 166.142, + 140.056, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.633, + 79.753, + 140.054, + 208.541, + 215.06, + 221.229, + 226.44, + 232.559, + 200.963, + 216.499, + 223.518, + 218.556, + 147.958, + 142.989, + 120.344, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.969, + 77.289, + 139.792, + 203.736, + 214.852, + 225.934, + 239.273, + 239.346, + 236.38, + 230.577, + 180.844, + 182.034, + 128.56, + 135.401, + 119.698, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 55.532, + 61.778, + 105.315, + 153.734, + 194.858, + 190.85, + 190.158, + 176.168, + 161.325, + 166.795, + 142.39, + 152.613, + 96.536, + 80.097, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.204, + 13.986, + 69.53, + 66.996, + 114.048, + 110.735, + 144.937, + 130.134, + 115.057, + 119.599, + 94.643, + 68.887, + 42.764, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.799, + 79.986, + 139.892, + 204.188, + 197.991, + 195.996, + 201.213, + 186.256, + 175.075, + 180.997, + 156.131, + 165.604, + 122.376, + 131.255, + 119.688, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.784, + 79.932, + 139.861, + 204.656, + 198.929, + 195.528, + 193.815, + 179.468, + 163.449, + 168.072, + 143.163, + 152.621, + 113.79, + 129.76, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.989, + 79.821, + 139.879, + 204.414, + 203.34, + 199.863, + 192.528, + 180.108, + 163.538, + 168.319, + 143.39, + 155.092, + 113.776, + 129.762, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.986, + 80.059, + 139.926, + 204.126, + 198.214, + 194.917, + 195.262, + 183.791, + 169.386, + 173.753, + 148.071, + 156.798, + 115.132, + 130.484, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.729, + 80.014, + 139.364, + 205.198, + 198.93, + 194.396, + 193.134, + 181.558, + 165.703, + 170.643, + 144.684, + 153.273, + 113.875, + 129.76, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 55.868, + 62.458, + 104.586, + 156.658, + 199.1, + 195.644, + 194.418, + 180.768, + 165.302, + 169.587, + 144.186, + 153.082, + 96.093, + 76.619, + 83.516, + 80.169, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.864, + 13.859, + 69.907, + 69.172, + 115.883, + 111.785, + 145.086, + 131.479, + 115.787, + 120.366, + 95.581, + 69.238, + 42.852, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 55.009, + 81.346, + 140.882, + 204.904, + 198.72, + 194.547, + 192.536, + 169.499, + 162.597, + 167.603, + 142.802, + 152.329, + 113.689, + 130.117, + 119.363, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 55.09, + 80.493, + 140.613, + 205.498, + 197.947, + 199.157, + 207.233, + 199.895, + 174.976, + 188.762, + 157.538, + 160.023, + 114.947, + 129.76, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.96, + 80.094, + 137.518, + 205.462, + 207.34, + 201.252, + 206.758, + 200.522, + 197.1, + 182.263, + 148.898, + 155.618, + 113.709, + 129.76, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.751, + 80.278, + 140.245, + 203.854, + 197.272, + 193.023, + 191.031, + 175.898, + 179.69, + 175.215, + 155.702, + 159.389, + 115.22, + 129.76, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.856, + 80.401, + 140.434, + 203.31, + 197.08, + 193.015, + 191.472, + 175.594, + 163.53, + 168.609, + 143.525, + 152.933, + 113.506, + 129.76, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 52.452, + 62.688, + 104.693, + 155.684, + 197.485, + 193.234, + 192.093, + 177.32, + 164.786, + 169.784, + 144.316, + 153.072, + 96.185, + 77.034, + 83.895, + 80.478, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 15.041, + 14.191, + 70.113, + 68.069, + 114.798, + 111.058, + 145.598, + 130.718, + 117.375, + 121.774, + 96.259, + 69.73, + 42.615, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.933, + 80.691, + 140.184, + 205.773, + 199.664, + 195.519, + 193.462, + 166.849, + 164.057, + 169.003, + 144.166, + 152.727, + 113.63, + 126.46, + 119.102, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.859, + 80.545, + 140.288, + 203.92, + 197.945, + 194.248, + 193.274, + 181.18, + 171.766, + 180.581, + 156.831, + 165.455, + 119.338, + 126.725, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.43, + 80.222, + 139.762, + 204.587, + 198.94, + 195.408, + 194.428, + 179.977, + 167.493, + 174.309, + 148.681, + 157.496, + 114.095, + 126.368, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.231, + 80.052, + 139.465, + 205.044, + 199.395, + 195.718, + 194.623, + 180.7, + 166.45, + 170.625, + 145.093, + 153.687, + 113.542, + 126.334, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.174, + 80.108, + 139.266, + 206.27, + 200.883, + 196.724, + 194.822, + 180.611, + 165.404, + 169.818, + 144.582, + 153.432, + 113.482, + 126.32, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 49.059, + 62.533, + 104.304, + 157.421, + 202.397, + 197.736, + 197.776, + 176.869, + 163.726, + 173.818, + 145.996, + 154.176, + 95.679, + 73.152, + 83.472, + 79.942, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.828, + 14.432, + 67.981, + 69.91, + 114.714, + 110.897, + 144.231, + 154.085, + 133.074, + 119.562, + 94.744, + 71.788, + 42.051, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 51.024, + 81.064, + 140.325, + 203.79, + 197.144, + 192.963, + 191.018, + 178.034, + 180.536, + 192.787, + 146.333, + 155.371, + 113.393, + 126.238, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.653, + 80.373, + 140.222, + 203.316, + 206.391, + 193.374, + 192.01, + 174.578, + 173.513, + 173.962, + 144.157, + 153.194, + 113.279, + 126.239, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.589, + 80.39, + 139.372, + 205.469, + 199.612, + 195.636, + 193.633, + 178.05, + 165.207, + 172.27, + 147.133, + 155.93, + 115.413, + 126.262, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.711, + 80.698, + 139.524, + 204.935, + 198.715, + 194.414, + 196.486, + 185.659, + 175.217, + 180.338, + 155.65, + 164.414, + 119.425, + 127.055, + 118.915, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.437, + 80.36, + 139.594, + 204.685, + 198.543, + 196.158, + 204.598, + 192.402, + 180.647, + 187.154, + 161.916, + 170.396, + 127.431, + 129.288, + 119.511, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.923, + 62.504, + 104.339, + 155.859, + 198.094, + 193.588, + 191.79, + 186.656, + 184.889, + 191.661, + 166.652, + 175.513, + 110.137, + 71.839, + 83.708, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.767, + 14.209, + 69.855, + 65.449, + 112.585, + 108.993, + 142.903, + 123.61, + 114.935, + 119.915, + 94.958, + 68.985, + 42.361, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.363, + 80.365, + 140.115, + 203.419, + 197.461, + 193.55, + 189.293, + 161.978, + 168.745, + 174.046, + 149.402, + 158.95, + 120.057, + 123.476, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.415, + 80.493, + 139.922, + 203.55, + 197.2, + 193.088, + 191.325, + 177.243, + 191.582, + 178.715, + 146.668, + 154.476, + 113.362, + 122.704, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.255, + 80.174, + 139.64, + 204.264, + 198.193, + 194.337, + 192.481, + 175.117, + 165.466, + 171.207, + 150.016, + 155.639, + 113.328, + 122.632, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.288, + 80.24, + 139.59, + 203.94, + 197.518, + 193.221, + 191.306, + 174.003, + 162.74, + 169.166, + 144.91, + 154.377, + 113.19, + 122.715, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.278, + 80.092, + 139.822, + 203.982, + 198.446, + 195.334, + 194.16, + 177.274, + 165.146, + 169.611, + 144.131, + 152.958, + 113.41, + 122.72, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 49.348, + 62.56, + 104.639, + 155.742, + 198.35, + 194.739, + 193.488, + 176.864, + 165.442, + 170.314, + 144.548, + 153.005, + 95.642, + 69.573, + 83.479, + 80.138, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.78, + 13.901, + 69.383, + 68.267, + 115.448, + 112.199, + 146.669, + 131.37, + 118.916, + 122.583, + 96.372, + 69.57, + 42.443, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.912, + 80.26, + 139.341, + 205.82, + 200.009, + 196.032, + 194.143, + 163.531, + 164.884, + 169.478, + 144.168, + 153.049, + 113.391, + 122.713, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.653, + 80.068, + 139.414, + 205.466, + 200.176, + 196.866, + 198.413, + 188.595, + 177.99, + 182.531, + 156.618, + 164.853, + 123.951, + 124.891, + 118.935, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.211, + 79.788, + 138.94, + 205.928, + 200.365, + 197.843, + 204.251, + 193.547, + 179.114, + 183.696, + 158.127, + 166.622, + 124.968, + 124.367, + 119.055, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.118, + 79.768, + 137.309, + 204.707, + 198.656, + 201.737, + 192.986, + 183.312, + 164.261, + 171.751, + 149.601, + 158.47, + 116.349, + 122.789, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.322, + 79.961, + 139.58, + 203.993, + 197.938, + 193.933, + 192.182, + 175.151, + 163.282, + 168.097, + 143.083, + 152.378, + 113.203, + 122.612, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 49.532, + 62.704, + 104.339, + 155.889, + 197.918, + 193.765, + 192.137, + 174.432, + 163.461, + 168.307, + 143.223, + 152.483, + 95.258, + 65.974, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.995, + 14.112, + 68.847, + 68.453, + 116.015, + 112.147, + 146.603, + 147.391, + 132.791, + 129.13, + 103.384, + 70.46, + 42.362, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.865, + 13.863, + 68.25, + 68.763, + 134.079, + 133.501, + 160.11, + 133.953, + 138.376, + 142.885, + 116.793, + 86.615, + 52.031, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.943, + 79.691, + 138.902, + 206.594, + 214.011, + 233.279, + 246.221, + 226.312, + 235.82, + 226.946, + 193.864, + 197.596, + 148.207, + 146.5, + 136.855, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.048, + 79.852, + 139.527, + 234.721, + 237.914, + 240.165, + 241.173, + 227.811, + 214.496, + 217.816, + 190.416, + 194.412, + 146.86, + 144.548, + 134.945, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.046, + 79.863, + 136.882, + 203.603, + 206.73, + 212.75, + 224.566, + 233.302, + 227.478, + 206.097, + 183.587, + 178.765, + 133.027, + 128.376, + 119.986, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.192, + 79.65, + 138.618, + 205.663, + 200.386, + 196.942, + 194.783, + 183.33, + 174.075, + 173.593, + 146.161, + 154.859, + 112.804, + 118.936, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 49.488, + 62.36, + 101.727, + 154.316, + 206.431, + 202.711, + 199.214, + 199.858, + 176.131, + 183.241, + 153.109, + 156.773, + 95.586, + 65.807, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.949, + 13.886, + 67.999, + 69.541, + 117.017, + 113.687, + 148.377, + 135.011, + 120.187, + 123.828, + 97.472, + 70.082, + 42.147, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.288, + 79.675, + 138.624, + 206.4, + 200.878, + 197.075, + 193.372, + 163.489, + 165.705, + 170.067, + 144.507, + 152.896, + 112.948, + 118.945, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.326, + 79.136, + 135.258, + 199.982, + 200.874, + 201.996, + 205.638, + 194.871, + 196.853, + 183.494, + 143.922, + 152.611, + 112.392, + 118.855, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.634, + 79.885, + 139.063, + 204.904, + 198.845, + 194.818, + 192.912, + 177.532, + 164.058, + 169.458, + 144.25, + 153.208, + 112.872, + 118.84, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.251, + 79.706, + 139.585, + 203.484, + 197.023, + 192.886, + 191.915, + 178.754, + 170.435, + 176.786, + 151.724, + 160.665, + 121.077, + 119.959, + 118.941, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.263, + 79.744, + 139.843, + 203.027, + 196.722, + 192.766, + 191.543, + 176.08, + 163.075, + 167.903, + 142.786, + 151.939, + 112.805, + 118.935, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.938, + 61.846, + 103.725, + 156.296, + 198.997, + 195.634, + 194.307, + 179.215, + 167.602, + 173.296, + 147.296, + 155.258, + 95.196, + 65.711, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.84, + 13.514, + 68.295, + 68.553, + 116.098, + 112.799, + 147.064, + 132.69, + 118.038, + 121.966, + 96.054, + 68.895, + 41.945, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.14, + 79.415, + 138.626, + 205.851, + 199.966, + 195.927, + 192.188, + 162.304, + 165.978, + 171.837, + 146.334, + 154.909, + 113.041, + 118.88, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.066, + 79.486, + 138.864, + 204.55, + 199.475, + 195.56, + 192.621, + 177.707, + 165.177, + 172.983, + 148.435, + 157.135, + 114.948, + 118.863, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.121, + 79.417, + 139.0, + 204.803, + 198.856, + 194.877, + 193.185, + 180.782, + 168.704, + 175.519, + 152.34, + 160.62, + 117.979, + 116.038, + 118.976, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.115, + 79.397, + 138.851, + 205.376, + 200.148, + 197.152, + 196.421, + 181.966, + 166.703, + 170.253, + 144.291, + 152.511, + 112.63, + 115.335, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.138, + 79.313, + 138.557, + 206.355, + 200.658, + 196.772, + 195.62, + 185.143, + 172.289, + 179.143, + 154.111, + 162.104, + 121.636, + 120.778, + 119.158, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.675, + 61.431, + 103.177, + 157.3, + 199.623, + 201.626, + 208.486, + 202.6, + 188.742, + 193.049, + 167.485, + 175.005, + 109.974, + 65.336, + 83.755, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.934, + 13.506, + 67.814, + 68.848, + 116.419, + 113.103, + 149.164, + 138.678, + 126.752, + 133.81, + 107.635, + 70.633, + 41.791, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.112, + 79.278, + 138.646, + 205.672, + 200.313, + 197.315, + 191.871, + 168.656, + 170.531, + 174.259, + 148.16, + 156.117, + 113.089, + 115.69, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.386, + 79.562, + 138.445, + 206.404, + 201.684, + 201.722, + 200.956, + 194.154, + 182.333, + 186.89, + 160.471, + 167.993, + 126.801, + 120.846, + 119.487, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.153, + 79.352, + 138.357, + 206.325, + 200.95, + 197.94, + 202.669, + 194.543, + 179.788, + 183.754, + 157.383, + 165.047, + 124.48, + 119.141, + 119.204, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.143, + 79.202, + 138.469, + 206.001, + 200.325, + 199.888, + 206.917, + 194.415, + 181.245, + 187.299, + 161.115, + 168.47, + 125.509, + 117.997, + 119.307, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.79, + 78.979, + 138.342, + 206.337, + 200.822, + 200.832, + 208.263, + 203.546, + 190.745, + 196.86, + 169.897, + 177.08, + 132.845, + 125.779, + 120.09, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.535, + 61.245, + 102.846, + 158.326, + 202.02, + 222.053, + 227.753, + 212.96, + 196.895, + 202.875, + 178.905, + 185.48, + 113.568, + 65.796, + 83.894, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.899, + 13.41, + 66.526, + 71.734, + 117.545, + 113.863, + 147.88, + 138.815, + 125.138, + 130.0, + 104.74, + 74.441, + 41.973, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.986, + 79.375, + 137.627, + 208.125, + 202.502, + 196.972, + 200.621, + 179.464, + 186.72, + 193.564, + 167.247, + 174.02, + 126.717, + 118.37, + 119.452, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.988, + 78.995, + 137.908, + 207.799, + 202.402, + 199.069, + 207.592, + 202.963, + 184.596, + 197.244, + 171.517, + 169.23, + 124.58, + 116.507, + 119.131, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.984, + 79.067, + 137.926, + 207.092, + 201.634, + 199.077, + 203.058, + 198.322, + 183.562, + 187.65, + 161.311, + 168.314, + 123.854, + 117.164, + 119.38, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.15, + 79.123, + 138.431, + 216.937, + 226.794, + 232.102, + 236.797, + 230.45, + 215.991, + 218.52, + 189.259, + 193.56, + 146.037, + 141.028, + 136.733, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.887, + 79.066, + 138.69, + 217.113, + 221.114, + 224.24, + 228.198, + 220.012, + 211.172, + 219.199, + 191.405, + 194.121, + 147.283, + 138.804, + 133.793, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.612, + 61.136, + 102.877, + 169.286, + 227.972, + 236.201, + 240.38, + 232.646, + 216.566, + 221.963, + 195.607, + 198.442, + 126.06, + 79.979, + 88.43, + 80.07, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.683, + 12.913, + 67.616, + 68.742, + 116.355, + 113.141, + 146.796, + 134.481, + 117.079, + 121.073, + 95.231, + 68.11, + 41.617, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.832, + 78.732, + 138.504, + 205.287, + 199.502, + 195.804, + 189.79, + 163.996, + 168.674, + 178.006, + 154.706, + 162.865, + 123.314, + 125.728, + 122.487, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.752, + 78.756, + 138.469, + 205.712, + 207.167, + 216.706, + 218.989, + 211.258, + 197.428, + 204.897, + 178.451, + 184.712, + 139.507, + 133.332, + 128.314, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.671, + 12.984, + 67.339, + 70.059, + 118.625, + 115.121, + 154.416, + 137.132, + 119.674, + 123.436, + 97.24, + 68.961, + 41.447, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.817, + 79.025, + 137.66, + 207.859, + 202.497, + 198.86, + 197.232, + 173.69, + 181.94, + 185.128, + 158.933, + 166.309, + 125.181, + 123.893, + 119.984, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.006, + 79.571, + 137.568, + 208.049, + 202.597, + 198.839, + 196.864, + 190.435, + 175.618, + 178.584, + 152.956, + 160.535, + 119.723, + 122.319, + 120.326, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.565, + 61.239, + 102.485, + 158.598, + 201.013, + 196.99, + 202.154, + 209.438, + 202.7, + 208.681, + 181.841, + 188.323, + 117.59, + 72.324, + 84.516, + 79.977, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.724, + 12.95, + 67.232, + 69.388, + 116.553, + 112.557, + 149.102, + 142.402, + 133.945, + 148.62, + 124.41, + 94.956, + 57.105, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.762, + 78.867, + 140.278, + 238.614, + 238.321, + 239.753, + 241.31, + 217.503, + 223.739, + 230.101, + 200.754, + 202.733, + 152.425, + 144.239, + 139.334, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.825, + 79.113, + 141.614, + 231.098, + 248.274, + 258.061, + 264.032, + 265.364, + 249.679, + 252.911, + 218.025, + 218.223, + 166.673, + 156.412, + 147.931, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.887, + 79.19, + 142.177, + 241.739, + 247.033, + 251.429, + 251.717, + 241.461, + 224.517, + 228.39, + 198.372, + 200.446, + 153.109, + 145.995, + 139.407, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.665, + 78.753, + 138.231, + 221.089, + 236.553, + 246.502, + 250.499, + 243.218, + 226.828, + 228.319, + 197.257, + 198.509, + 150.693, + 142.499, + 135.963, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.636, + 78.603, + 138.166, + 206.5, + 206.302, + 217.022, + 225.978, + 218.629, + 201.494, + 206.318, + 179.339, + 185.396, + 139.993, + 133.666, + 125.623, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.179, + 61.214, + 101.129, + 158.054, + 208.868, + 217.304, + 233.738, + 240.785, + 224.963, + 206.557, + 179.708, + 185.917, + 118.983, + 75.727, + 86.049, + 79.99, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.511, + 13.457, + 66.717, + 71.047, + 118.606, + 114.657, + 153.35, + 158.825, + 142.75, + 149.655, + 124.139, + 88.128, + 49.43, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.678, + 78.674, + 137.763, + 207.175, + 201.369, + 204.191, + 212.093, + 189.854, + 196.669, + 204.466, + 176.982, + 183.102, + 138.797, + 133.602, + 128.087, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.62, + 78.662, + 138.095, + 206.364, + 208.344, + 216.797, + 220.702, + 215.267, + 199.658, + 206.96, + 182.147, + 189.305, + 142.946, + 137.171, + 133.9, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.605, + 78.651, + 138.179, + 206.111, + 200.151, + 196.162, + 199.797, + 196.742, + 179.095, + 184.516, + 160.254, + 168.389, + 128.935, + 133.008, + 124.555, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.589, + 78.624, + 138.103, + 206.347, + 200.385, + 200.259, + 208.108, + 208.747, + 197.44, + 205.072, + 179.3, + 186.383, + 144.026, + 143.124, + 135.553, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.596, + 78.57, + 138.179, + 209.152, + 229.421, + 243.458, + 247.834, + 241.744, + 224.105, + 230.265, + 199.884, + 202.092, + 152.484, + 146.968, + 138.813, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 48.381, + 60.989, + 102.619, + 158.349, + 211.169, + 228.367, + 236.575, + 228.705, + 207.71, + 215.132, + 189.876, + 193.587, + 122.58, + 83.204, + 90.342, + 80.188, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.699, + 12.989, + 66.886, + 70.778, + 118.668, + 119.808, + 167.607, + 163.746, + 143.54, + 148.917, + 154.289, + 92.515, + 54.302, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.275, + 77.109, + 131.763, + 199.77, + 216.082, + 239.466, + 248.762, + 254.803, + 257.595, + 266.687, + 216.756, + 213.048, + 151.267, + 147.99, + 139.737, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.626, + 78.81, + 137.637, + 227.522, + 243.015, + 250.803, + 252.765, + 246.215, + 227.368, + 237.724, + 203.647, + 200.439, + 148.943, + 146.928, + 139.616, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.578, + 78.611, + 137.901, + 207.003, + 206.316, + 216.71, + 223.259, + 221.828, + 206.251, + 211.983, + 186.512, + 194.534, + 150.093, + 147.058, + 140.283, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.577, + 78.653, + 137.932, + 208.781, + 220.066, + 236.112, + 239.864, + 235.473, + 217.116, + 220.141, + 193.958, + 198.509, + 149.87, + 147.418, + 139.262, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.596, + 78.723, + 137.806, + 207.377, + 205.561, + 220.285, + 229.32, + 224.952, + 205.701, + 210.382, + 183.899, + 189.975, + 142.653, + 140.509, + 134.887, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 48.369, + 61.079, + 102.488, + 158.956, + 204.887, + 208.162, + 210.483, + 205.592, + 188.732, + 195.724, + 171.653, + 179.847, + 117.664, + 83.407, + 98.237, + 85.304, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.606, + 13.004, + 67.097, + 73.298, + 145.583, + 153.646, + 190.686, + 182.22, + 162.865, + 167.434, + 142.431, + 106.69, + 67.087, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.562, + 78.797, + 137.967, + 207.613, + 218.595, + 233.488, + 241.534, + 218.978, + 219.811, + 226.252, + 197.339, + 199.373, + 149.433, + 146.595, + 138.965, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.543, + 78.83, + 137.879, + 209.359, + 213.333, + 224.954, + 234.689, + 233.851, + 218.433, + 225.471, + 197.974, + 200.889, + 150.927, + 146.455, + 138.066, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.275, + 78.363, + 130.431, + 229.866, + 237.789, + 247.5, + 248.397, + 248.702, + 235.917, + 222.333, + 193.82, + 195.101, + 144.926, + 143.174, + 134.862, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.525, + 78.932, + 137.921, + 217.722, + 235.347, + 241.389, + 242.459, + 237.513, + 215.93, + 217.149, + 188.704, + 193.623, + 146.699, + 143.848, + 135.285, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.916, + 78.766, + 138.146, + 211.243, + 219.364, + 225.563, + 230.442, + 226.337, + 209.574, + 215.471, + 186.081, + 186.273, + 135.992, + 136.135, + 121.79, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 51.676, + 61.253, + 102.619, + 158.977, + 210.644, + 219.826, + 226.539, + 222.379, + 210.376, + 207.823, + 182.219, + 188.061, + 116.695, + 78.093, + 84.432, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.942, + 13.532, + 67.254, + 70.246, + 117.253, + 113.037, + 146.257, + 136.228, + 116.574, + 120.768, + 95.283, + 68.148, + 41.748, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.152, + 79.06, + 138.742, + 205.203, + 198.806, + 194.35, + 193.566, + 174.659, + 174.124, + 179.317, + 154.219, + 162.604, + 122.582, + 124.3, + 119.111, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.851, + 78.855, + 138.69, + 222.566, + 233.726, + 241.86, + 248.734, + 248.772, + 234.087, + 233.245, + 202.688, + 206.901, + 159.41, + 160.14, + 149.168, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.85, + 78.895, + 151.336, + 253.606, + 267.596, + 273.482, + 276.25, + 271.545, + 251.762, + 256.694, + 227.991, + 231.695, + 171.938, + 161.559, + 146.698, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.835, + 78.886, + 157.015, + 257.174, + 257.552, + 261.579, + 268.672, + 262.776, + 242.334, + 244.174, + 213.325, + 212.284, + 157.718, + 152.744, + 138.043, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.819, + 78.891, + 138.713, + 205.909, + 204.194, + 211.879, + 215.797, + 209.648, + 193.615, + 200.547, + 173.793, + 180.368, + 133.627, + 133.691, + 121.645, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 51.607, + 61.226, + 103.266, + 161.908, + 230.806, + 242.903, + 249.138, + 240.051, + 222.426, + 229.099, + 204.316, + 205.707, + 130.624, + 92.472, + 98.754, + 83.16, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.865, + 13.158, + 68.938, + 87.581, + 152.405, + 153.914, + 193.114, + 189.358, + 171.556, + 176.924, + 152.275, + 111.383, + 69.649, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.82, + 78.915, + 143.225, + 241.418, + 249.782, + 255.052, + 259.586, + 240.522, + 236.541, + 240.486, + 214.446, + 215.245, + 161.406, + 160.624, + 145.016, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.806, + 78.921, + 140.731, + 240.452, + 248.758, + 262.627, + 263.015, + 258.244, + 245.293, + 247.899, + 208.273, + 204.302, + 147.81, + 148.46, + 133.575, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.78, + 79.083, + 139.754, + 237.787, + 244.41, + 249.757, + 258.094, + 255.111, + 233.316, + 238.18, + 212.647, + 215.248, + 163.218, + 164.774, + 148.614, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.769, + 79.111, + 142.026, + 238.767, + 252.228, + 262.429, + 266.928, + 260.502, + 239.351, + 243.003, + 216.032, + 218.071, + 168.231, + 170.658, + 153.458, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.207, + 79.095, + 141.433, + 239.087, + 248.661, + 256.523, + 260.127, + 254.265, + 234.786, + 242.113, + 209.618, + 212.005, + 160.866, + 160.837, + 144.721, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 54.976, + 61.323, + 103.086, + 158.372, + 201.197, + 204.881, + 211.595, + 207.456, + 189.806, + 196.757, + 171.706, + 178.205, + 110.471, + 76.206, + 84.144, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.266, + 13.351, + 68.024, + 69.043, + 118.868, + 111.769, + 151.916, + 150.669, + 138.797, + 145.006, + 119.106, + 82.217, + 43.681, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.194, + 79.136, + 139.11, + 205.56, + 199.598, + 198.707, + 214.272, + 203.024, + 197.937, + 201.779, + 175.603, + 180.045, + 129.372, + 132.337, + 120.159, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.177, + 79.123, + 138.907, + 205.984, + 202.313, + 206.463, + 210.325, + 208.117, + 199.56, + 211.449, + 183.939, + 187.914, + 138.267, + 142.127, + 126.299, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.162, + 79.105, + 138.898, + 205.957, + 201.564, + 209.2, + 217.789, + 215.713, + 203.732, + 214.944, + 187.553, + 191.676, + 143.845, + 152.252, + 133.207, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.165, + 79.239, + 139.217, + 206.788, + 214.54, + 223.809, + 233.479, + 230.529, + 212.178, + 215.602, + 188.473, + 193.777, + 145.48, + 152.649, + 136.406, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.149, + 79.232, + 139.099, + 226.585, + 234.81, + 244.927, + 250.889, + 245.503, + 231.205, + 232.525, + 197.816, + 197.804, + 149.597, + 156.683, + 139.302, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 54.901, + 61.465, + 103.083, + 167.586, + 234.797, + 247.508, + 250.342, + 243.748, + 227.668, + 230.673, + 204.15, + 202.623, + 127.649, + 95.958, + 96.519, + 82.915, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.171, + 13.48, + 67.466, + 72.132, + 132.098, + 136.124, + 180.481, + 176.643, + 154.456, + 173.234, + 143.527, + 96.14, + 58.93, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 79.187, + 138.598, + 230.655, + 241.452, + 248.041, + 252.987, + 242.284, + 227.984, + 230.491, + 200.063, + 201.837, + 151.872, + 156.445, + 137.537, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 79.176, + 138.827, + 210.161, + 220.003, + 229.158, + 233.838, + 228.795, + 210.072, + 214.055, + 186.526, + 192.83, + 146.562, + 152.601, + 133.617, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 79.207, + 138.781, + 207.451, + 207.138, + 216.13, + 220.897, + 215.776, + 201.79, + 218.518, + 192.905, + 192.579, + 144.229, + 149.515, + 132.021, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 78.115, + 138.667, + 207.372, + 211.189, + 227.202, + 238.847, + 238.702, + 232.31, + 243.967, + 192.292, + 204.225, + 151.397, + 158.875, + 137.379, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 79.262, + 138.347, + 215.876, + 226.355, + 233.293, + 237.873, + 234.53, + 214.288, + 220.627, + 192.358, + 194.617, + 146.197, + 150.945, + 124.138, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 58.323, + 61.695, + 103.886, + 158.072, + 200.328, + 205.54, + 219.099, + 218.029, + 210.834, + 218.512, + 192.454, + 195.599, + 119.132, + 88.357, + 85.857, + 80.535, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 13.682, + 68.573, + 69.631, + 117.656, + 114.862, + 167.629, + 186.001, + 183.709, + 183.36, + 130.777, + 96.203, + 57.131, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 13.638, + 68.319, + 69.582, + 116.77, + 112.846, + 151.247, + 146.857, + 150.278, + 152.381, + 127.418, + 84.775, + 44.917, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.445, + 139.263, + 206.508, + 200.607, + 198.244, + 204.767, + 204.279, + 196.289, + 200.258, + 173.984, + 181.512, + 136.127, + 145.875, + 121.871, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.412, + 139.046, + 206.722, + 205.011, + 217.968, + 224.183, + 223.195, + 210.09, + 216.714, + 201.868, + 195.889, + 147.084, + 156.27, + 135.95, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.44, + 139.052, + 210.775, + 220.978, + 237.197, + 244.697, + 238.219, + 224.979, + 228.216, + 199.005, + 202.685, + 154.488, + 165.394, + 145.753, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.494, + 140.327, + 234.309, + 245.566, + 250.815, + 253.251, + 248.384, + 233.333, + 237.836, + 207.74, + 211.512, + 163.437, + 175.051, + 150.307, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 58.323, + 61.952, + 104.61, + 179.821, + 247.117, + 255.108, + 258.731, + 249.522, + 233.622, + 235.349, + 206.027, + 210.651, + 137.595, + 113.066, + 108.47, + 98.048, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 13.991, + 69.534, + 77.831, + 146.914, + 158.835, + 202.235, + 191.974, + 179.263, + 181.707, + 149.736, + 112.02, + 69.201, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.707, + 139.875, + 216.466, + 237.133, + 249.159, + 249.574, + 237.595, + 221.657, + 226.889, + 199.988, + 202.716, + 150.192, + 163.522, + 141.445, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.675, + 139.929, + 205.869, + 211.898, + 224.402, + 235.603, + 230.945, + 215.775, + 220.173, + 193.796, + 199.135, + 149.849, + 162.978, + 138.69, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.613, + 139.702, + 206.185, + 211.599, + 220.975, + 226.356, + 223.568, + 212.592, + 218.887, + 190.213, + 194.204, + 145.768, + 158.26, + 134.039, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.549, + 139.504, + 206.136, + 200.282, + 214.419, + 235.026, + 229.479, + 211.263, + 215.361, + 187.576, + 190.898, + 139.227, + 153.023, + 131.687, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 79.394, + 138.671, + 207.183, + 205.163, + 209.582, + 209.771, + 201.835, + 185.957, + 196.957, + 173.466, + 181.07, + 141.731, + 153.612, + 131.483, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 61.75, + 62.17, + 105.129, + 155.118, + 196.465, + 196.531, + 198.493, + 187.503, + 175.656, + 182.804, + 159.406, + 169.305, + 114.494, + 89.67, + 84.588, + 80.045, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 14.321, + 70.305, + 65.816, + 112.175, + 114.944, + 165.185, + 159.116, + 150.595, + 155.494, + 129.917, + 92.033, + 55.133, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 80.07, + 141.008, + 203.029, + 197.231, + 199.005, + 201.112, + 188.125, + 176.768, + 182.691, + 158.129, + 167.576, + 131.017, + 144.534, + 120.286, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 80.007, + 140.682, + 204.222, + 198.242, + 194.575, + 195.372, + 191.608, + 182.293, + 187.715, + 162.847, + 171.645, + 134.28, + 148.157, + 122.122, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 79.807, + 139.984, + 204.874, + 198.181, + 193.737, + 191.875, + 179.591, + 163.503, + 169.9, + 149.859, + 162.129, + 125.576, + 137.943, + 119.302, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.026, + 80.054, + 140.908, + 203.56, + 197.387, + 195.435, + 201.987, + 195.306, + 185.522, + 190.546, + 165.516, + 174.543, + 134.79, + 144.893, + 120.76, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.025, + 80.004, + 140.526, + 204.643, + 198.296, + 201.603, + 213.623, + 205.022, + 192.613, + 199.167, + 174.87, + 183.208, + 144.704, + 152.293, + 128.941, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 61.75, + 61.874, + 103.982, + 160.383, + 217.732, + 225.11, + 234.961, + 233.351, + 218.871, + 225.043, + 201.018, + 208.006, + 139.449, + 106.267, + 102.088, + 88.935, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 14.4, + 70.391, + 73.241, + 142.955, + 157.402, + 201.785, + 189.456, + 185.402, + 191.292, + 162.389, + 133.631, + 89.055, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 80.158, + 154.76, + 248.774, + 266.667, + 289.255, + 290.857, + 271.766, + 256.872, + 259.47, + 226.448, + 223.566, + 173.423, + 176.192, + 153.765, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 80.101, + 150.726, + 244.137, + 250.616, + 258.427, + 271.616, + 264.699, + 248.893, + 255.419, + 226.42, + 223.72, + 173.823, + 177.306, + 154.167, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 79.896, + 140.342, + 205.159, + 201.107, + 213.238, + 217.717, + 211.006, + 198.677, + 203.626, + 179.096, + 185.887, + 143.692, + 149.574, + 123.57, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 80.151, + 140.904, + 204.382, + 201.132, + 214.21, + 218.965, + 207.181, + 194.447, + 199.161, + 173.048, + 180.474, + 141.182, + 146.217, + 122.127, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 79.305, + 139.408, + 209.227, + 198.309, + 205.814, + 222.451, + 217.356, + 203.821, + 213.452, + 170.614, + 178.518, + 142.323, + 147.502, + 122.418, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 61.75, + 62.09, + 104.765, + 157.41, + 199.773, + 198.532, + 198.076, + 196.009, + 187.607, + 195.671, + 170.101, + 177.856, + 118.673, + 84.221, + 83.482, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 14.092, + 69.493, + 68.313, + 118.745, + 114.442, + 151.814, + 150.445, + 127.271, + 136.234, + 103.915, + 78.689, + 55.479, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.636, + 80.101, + 140.376, + 205.801, + 200.054, + 210.797, + 224.557, + 222.945, + 210.393, + 212.571, + 182.275, + 184.458, + 143.439, + 144.675, + 122.357, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 78.308, + 139.125, + 205.464, + 199.492, + 195.504, + 194.834, + 191.248, + 168.838, + 174.251, + 149.935, + 159.913, + 127.933, + 137.727, + 119.589, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.577, + 79.93, + 140.477, + 204.836, + 199.314, + 201.894, + 207.048, + 197.139, + 181.702, + 186.999, + 162.665, + 172.143, + 139.325, + 141.493, + 121.746, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.452, + 79.682, + 140.629, + 204.165, + 201.188, + 204.326, + 212.086, + 209.155, + 195.947, + 209.844, + 187.878, + 194.264, + 148.244, + 153.416, + 130.731, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 79.371, + 131.623, + 202.884, + 209.923, + 247.487, + 243.759, + 251.063, + 261.155, + 263.644, + 199.341, + 208.734, + 160.485, + 160.972, + 134.902, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 65.176, + 62.457, + 106.358, + 154.212, + 195.94, + 201.631, + 213.403, + 226.515, + 223.513, + 225.284, + 192.161, + 186.607, + 125.489, + 87.081, + 85.837, + 80.604, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 14.459, + 70.759, + 65.9, + 112.861, + 111.946, + 154.165, + 148.202, + 140.046, + 145.459, + 120.204, + 78.96, + 60.714, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 14.312, + 70.448, + 66.633, + 114.245, + 125.546, + 170.383, + 153.42, + 139.425, + 141.912, + 112.883, + 75.525, + 58.982, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 80.076, + 141.368, + 203.752, + 201.653, + 209.487, + 209.139, + 195.584, + 182.758, + 188.057, + 163.099, + 172.383, + 140.318, + 140.454, + 122.122, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 79.918, + 141.018, + 204.403, + 198.222, + 209.09, + 223.53, + 204.769, + 190.142, + 195.079, + 170.534, + 177.588, + 141.368, + 139.78, + 120.764, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 79.877, + 141.028, + 203.997, + 198.081, + 199.053, + 205.75, + 197.366, + 184.497, + 190.137, + 165.349, + 174.501, + 143.524, + 141.464, + 122.239, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 79.974, + 141.277, + 203.946, + 197.695, + 194.636, + 194.66, + 182.249, + 169.867, + 176.154, + 152.102, + 162.518, + 132.998, + 139.244, + 120.5, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 68.602, + 62.227, + 105.812, + 155.972, + 198.292, + 195.021, + 194.296, + 183.974, + 178.451, + 184.268, + 159.332, + 168.859, + 116.821, + 83.62, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.126, + 70.026, + 68.354, + 120.295, + 115.916, + 146.863, + 138.126, + 124.733, + 123.752, + 102.008, + 75.047, + 62.332, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.951, + 79.531, + 139.518, + 206.283, + 199.849, + 196.201, + 196.007, + 189.333, + 172.5, + 179.462, + 155.602, + 165.986, + 136.209, + 138.209, + 120.021, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.124, + 79.688, + 140.712, + 204.979, + 199.074, + 198.785, + 203.541, + 196.578, + 183.532, + 190.461, + 166.4, + 175.83, + 143.787, + 140.688, + 122.133, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.833, + 79.687, + 141.195, + 204.12, + 199.814, + 199.065, + 198.02, + 195.022, + 190.509, + 196.013, + 169.332, + 174.765, + 139.056, + 140.07, + 121.452, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.833, + 79.727, + 141.369, + 208.156, + 217.453, + 213.3, + 212.684, + 200.174, + 186.516, + 192.185, + 167.38, + 177.777, + 146.901, + 141.433, + 122.799, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.833, + 79.436, + 141.465, + 220.219, + 232.231, + 250.939, + 249.538, + 234.447, + 218.605, + 225.134, + 191.059, + 186.424, + 148.165, + 142.027, + 123.488, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 68.602, + 61.446, + 105.523, + 156.201, + 198.174, + 194.664, + 193.545, + 183.09, + 178.751, + 192.072, + 167.237, + 176.02, + 117.605, + 83.505, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 13.225, + 70.036, + 67.757, + 114.801, + 111.622, + 146.177, + 136.368, + 118.884, + 124.341, + 100.502, + 76.025, + 65.758, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.963, + 79.034, + 141.07, + 204.21, + 197.978, + 194.138, + 192.826, + 183.8, + 181.063, + 192.312, + 167.952, + 175.613, + 141.015, + 136.712, + 118.899, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.01, + 78.904, + 141.058, + 204.163, + 198.153, + 194.532, + 194.39, + 187.664, + 176.63, + 185.295, + 161.162, + 171.359, + 140.344, + 138.398, + 120.131, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.007, + 78.424, + 139.926, + 205.839, + 199.446, + 196.732, + 201.262, + 199.912, + 181.765, + 195.014, + 166.586, + 172.424, + 139.641, + 137.962, + 119.977, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.971, + 81.715, + 139.796, + 205.854, + 199.044, + 195.105, + 193.713, + 188.963, + 168.445, + 175.131, + 152.139, + 162.399, + 138.038, + 137.93, + 119.74, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.385, + 81.962, + 140.139, + 204.634, + 197.512, + 195.548, + 198.14, + 191.93, + 171.254, + 177.314, + 154.597, + 165.822, + 139.621, + 138.654, + 120.006, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.127, + 64.592, + 106.301, + 154.501, + 196.182, + 192.344, + 192.447, + 184.054, + 168.156, + 174.116, + 150.872, + 162.504, + 120.83, + 83.828, + 83.472, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 16.039, + 70.862, + 66.196, + 112.804, + 109.785, + 151.311, + 147.161, + 131.119, + 133.046, + 106.244, + 78.316, + 65.762, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.311, + 81.938, + 141.306, + 203.689, + 198.73, + 209.273, + 225.233, + 225.447, + 213.382, + 223.357, + 192.734, + 192.474, + 155.978, + 150.008, + 126.637, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.889, + 81.564, + 141.225, + 203.998, + 204.322, + 219.64, + 232.037, + 233.484, + 222.991, + 212.891, + 180.233, + 180.197, + 149.61, + 142.027, + 121.148, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.899, + 81.507, + 141.034, + 204.606, + 219.479, + 220.648, + 218.81, + 210.233, + 190.781, + 196.214, + 172.806, + 186.315, + 144.828, + 139.501, + 121.005, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.929, + 81.382, + 140.813, + 204.364, + 197.234, + 197.992, + 209.445, + 208.796, + 169.066, + 182.18, + 153.661, + 167.955, + 138.606, + 137.513, + 119.0, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.588, + 81.454, + 140.386, + 204.778, + 197.985, + 194.193, + 194.644, + 191.114, + 169.332, + 175.248, + 152.056, + 167.337, + 139.346, + 138.046, + 119.481, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.102, + 63.787, + 106.29, + 154.789, + 196.082, + 191.988, + 190.692, + 182.504, + 164.244, + 170.838, + 148.201, + 164.163, + 118.899, + 83.472, + 83.472, + 79.944, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 15.239, + 70.959, + 67.129, + 113.427, + 109.491, + 143.671, + 136.551, + 117.041, + 123.287, + 100.797, + 80.99, + 65.758, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 57.45, + 87.648, + 138.737, + 198.088, + 194.131, + 192.833, + 188.973, + 168.952, + 175.387, + 152.28, + 167.611, + 187.346, + 137.981, + 137.303, + 150.796, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 57.145, + 87.549, + 139.064, + 198.659, + 195.022, + 199.954, + 205.113, + 183.602, + 189.092, + 164.193, + 170.751, + 187.637, + 137.954, + 137.484, + 151.025, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.782, + 87.432, + 139.352, + 199.271, + 196.624, + 202.728, + 203.799, + 181.55, + 186.992, + 163.013, + 176.297, + 189.029, + 138.787, + 137.89, + 151.694, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.759, + 87.175, + 139.498, + 205.484, + 217.674, + 226.152, + 229.868, + 205.307, + 205.373, + 175.742, + 186.661, + 200.898, + 143.101, + 139.57, + 152.94, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.382, + 86.896, + 139.948, + 201.787, + 212.323, + 224.491, + 234.264, + 203.231, + 206.907, + 180.881, + 188.957, + 199.05, + 141.327, + 140.342, + 153.733, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 54.955, + 69.465, + 103.77, + 151.384, + 211.654, + 220.078, + 217.101, + 195.287, + 205.914, + 183.267, + 189.603, + 200.371, + 122.548, + 86.155, + 117.506, + 80.336, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.171, + 19.119, + 70.932, + 63.4, + 111.79, + 110.371, + 146.969, + 128.061, + 126.444, + 103.889, + 123.336, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.589, + 85.089, + 139.463, + 200.103, + 195.595, + 194.029, + 195.042, + 176.442, + 172.632, + 149.848, + 168.86, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.765, + 80.438, + 139.71, + 199.763, + 195.81, + 203.143, + 214.887, + 211.501, + 193.875, + 169.021, + 176.941, + 187.748, + 138.656, + 137.563, + 150.941, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.956, + 77.843, + 140.69, + 208.893, + 195.157, + 193.45, + 194.377, + 184.163, + 172.524, + 150.111, + 170.777, + 185.076, + 136.677, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 58.108, + 87.421, + 141.895, + 200.142, + 195.482, + 193.989, + 193.114, + 166.478, + 173.03, + 150.375, + 169.57, + 185.303, + 137.121, + 137.101, + 151.285, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.214, + 88.234, + 137.925, + 196.406, + 192.225, + 190.901, + 186.944, + 164.343, + 170.816, + 148.859, + 168.949, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 59.146, + 69.363, + 103.663, + 149.806, + 193.817, + 192.518, + 190.317, + 166.702, + 172.923, + 153.098, + 171.543, + 185.528, + 119.145, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 14.618, + 70.094, + 61.59, + 118.817, + 115.63, + 159.585, + 156.089, + 144.667, + 104.289, + 122.61, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.25, + 86.112, + 137.902, + 200.013, + 205.771, + 204.725, + 201.381, + 198.525, + 173.497, + 151.01, + 170.363, + 185.381, + 136.901, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.08, + 86.083, + 140.465, + 202.256, + 216.386, + 234.798, + 247.147, + 222.799, + 229.333, + 196.382, + 195.464, + 201.178, + 143.589, + 140.767, + 154.018, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.575, + 85.703, + 140.372, + 200.971, + 200.856, + 208.577, + 213.158, + 188.026, + 194.457, + 171.583, + 187.777, + 191.799, + 140.582, + 139.346, + 152.156, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 14.003, + 69.698, + 72.548, + 112.366, + 110.629, + 147.1, + 138.097, + 124.893, + 106.936, + 122.608, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.472, + 86.548, + 139.579, + 197.98, + 193.48, + 191.894, + 191.955, + 166.455, + 172.964, + 150.476, + 171.629, + 184.874, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 58.961, + 62.496, + 104.747, + 150.482, + 194.641, + 192.972, + 193.976, + 177.193, + 171.786, + 149.418, + 169.481, + 184.831, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 14.039, + 69.12, + 62.578, + 112.176, + 110.397, + 146.691, + 129.936, + 124.641, + 101.779, + 121.338, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.177, + 80.163, + 140.351, + 199.751, + 198.322, + 205.564, + 216.868, + 203.088, + 199.409, + 175.349, + 189.242, + 197.633, + 141.465, + 139.197, + 151.715, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.859, + 79.627, + 139.165, + 209.028, + 201.823, + 203.624, + 206.222, + 194.335, + 175.542, + 152.239, + 171.14, + 185.693, + 136.721, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.403, + 79.709, + 139.752, + 200.698, + 196.028, + 195.353, + 199.102, + 193.596, + 177.277, + 154.198, + 173.357, + 187.306, + 137.556, + 136.693, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.31, + 84.707, + 141.332, + 200.031, + 195.907, + 196.362, + 198.206, + 171.612, + 175.956, + 193.795, + 205.787, + 217.926, + 160.331, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.044, + 77.898, + 134.948, + 203.179, + 196.445, + 197.941, + 196.803, + 196.976, + 198.62, + 161.784, + 169.782, + 184.831, + 136.613, + 136.613, + 150.799, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 63.269, + 66.668, + 107.605, + 158.601, + 202.805, + 204.645, + 202.821, + 182.824, + 189.713, + 190.56, + 171.125, + 184.831, + 118.91, + 83.647, + 115.624, + 80.35, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 12.522, + 63.76, + 62.998, + 117.366, + 126.958, + 161.718, + 159.111, + 161.633, + 125.178, + 123.478, + 102.057, + 66.759, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 65.086, + 84.424, + 131.174, + 200.054, + 207.701, + 207.967, + 205.901, + 202.881, + 196.272, + 149.981, + 170.939, + 184.831, + 136.613, + 136.613, + 150.798, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.307, + 83.846, + 140.814, + 198.637, + 194.64, + 198.995, + 204.077, + 174.5, + 175.925, + 152.886, + 175.869, + 185.245, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.609, + 83.358, + 141.56, + 200.156, + 195.854, + 194.178, + 202.329, + 170.728, + 180.885, + 154.515, + 173.972, + 185.349, + 137.112, + 136.764, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.636, + 83.136, + 141.455, + 199.678, + 195.271, + 193.464, + 194.468, + 180.626, + 172.468, + 149.949, + 173.277, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.106, + 83.415, + 140.96, + 199.123, + 194.343, + 193.374, + 195.077, + 171.505, + 173.209, + 151.159, + 174.726, + 186.027, + 137.452, + 136.655, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.204, + 65.707, + 105.441, + 150.651, + 196.988, + 197.188, + 193.928, + 176.589, + 171.915, + 149.29, + 173.08, + 184.831, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 16.641, + 71.193, + 63.25, + 111.69, + 109.463, + 145.31, + 143.498, + 141.037, + 117.74, + 125.075, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.347, + 33.392, + 33.37, + 68.291, + 83.312, + 142.468, + 206.67, + 208.64, + 193.568, + 196.85, + 202.551, + 198.195, + 157.538, + 170.225, + 184.831, + 136.625, + 137.045, + 151.62, + 60.908, + 33.107, + 33.107, + 33.107, + 33.25, + 33.265, + 33.803, + 34.096, + 34.422, + 68.957, + 83.857, + 141.893, + 199.18, + 194.285, + 192.169, + 193.06, + 171.102, + 171.427, + 149.016, + 169.589, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.314, + 33.582, + 34.004, + 34.072, + 34.376, + 68.876, + 83.535, + 141.3, + 199.146, + 194.307, + 192.453, + 193.448, + 171.274, + 171.518, + 149.045, + 169.457, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.402, + 33.526, + 33.539, + 33.8, + 34.142, + 68.678, + 82.725, + 137.268, + 200.399, + 196.191, + 194.965, + 195.45, + 189.223, + 172.453, + 149.621, + 169.597, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.216, + 33.336, + 68.178, + 81.895, + 138.028, + 200.153, + 204.961, + 205.242, + 206.97, + 198.383, + 196.07, + 149.566, + 171.006, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.533, + 64.676, + 106.109, + 150.964, + 194.032, + 192.298, + 194.107, + 173.1, + 171.977, + 149.65, + 170.32, + 185.423, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 16.076, + 70.66, + 62.868, + 112.727, + 114.806, + 157.529, + 133.174, + 132.908, + 112.566, + 127.886, + 102.532, + 66.24, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.493, + 80.651, + 132.229, + 200.848, + 208.105, + 226.541, + 229.241, + 237.663, + 204.388, + 169.383, + 182.277, + 188.87, + 139.612, + 138.654, + 152.061, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.138, + 81.518, + 141.743, + 200.846, + 209.387, + 226.829, + 231.114, + 208.021, + 200.734, + 174.308, + 188.582, + 197.763, + 143.151, + 141.391, + 154.606, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.557, + 81.207, + 142.401, + 201.892, + 212.062, + 227.746, + 240.014, + 219.52, + 209.157, + 180.777, + 186.945, + 189.712, + 139.845, + 138.591, + 151.877, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.762, + 78.356, + 136.954, + 208.001, + 214.854, + 224.711, + 231.843, + 221.953, + 202.546, + 169.623, + 180.631, + 189.083, + 139.769, + 138.927, + 152.122, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.962, + 80.83, + 143.589, + 201.51, + 201.606, + 213.647, + 204.797, + 185.671, + 181.962, + 159.497, + 175.884, + 188.101, + 138.309, + 137.364, + 150.879, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.192, + 63.621, + 107.616, + 152.741, + 196.474, + 195.343, + 196.199, + 191.069, + 178.325, + 161.261, + 172.621, + 185.794, + 118.899, + 83.472, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.932, + 73.053, + 64.076, + 112.541, + 111.92, + 148.976, + 128.249, + 126.404, + 100.82, + 122.346, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.776, + 82.202, + 141.862, + 199.21, + 194.779, + 205.866, + 230.29, + 206.144, + 192.448, + 166.25, + 173.23, + 185.953, + 137.34, + 136.667, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 15.203, + 71.34, + 62.762, + 112.316, + 120.902, + 167.766, + 150.377, + 143.595, + 112.482, + 123.521, + 101.204, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.91, + 81.387, + 143.348, + 200.969, + 203.823, + 202.233, + 204.403, + 186.67, + 181.591, + 174.25, + 170.858, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.064, + 78.444, + 133.91, + 201.018, + 206.743, + 204.94, + 201.22, + 209.524, + 203.035, + 180.613, + 199.662, + 184.831, + 136.613, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.135, + 77.998, + 139.403, + 208.857, + 206.853, + 200.474, + 200.115, + 197.221, + 198.821, + 192.386, + 202.858, + 216.707, + 138.826, + 136.613, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.848, + 60.576, + 95.256, + 152.759, + 198.283, + 199.419, + 197.375, + 199.527, + 211.776, + 194.287, + 200.462, + 216.707, + 123.493, + 83.472, + 115.415, + 80.182, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.092, + 61.32, + 66.725, + 113.826, + 116.662, + 152.161, + 151.486, + 150.402, + 112.309, + 122.716, + 101.185, + 65.758, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.664, + 80.413, + 144.086, + 202.036, + 196.282, + 193.927, + 203.303, + 187.298, + 170.937, + 152.833, + 166.946, + 184.831, + 136.613, + 136.613, + 150.791, + 60.908, + 33.107, + 33.107 + ], + "annual_emissions_tonnes_NOx": 0.086, + "annual_emissions_tonnes_SO2": 0.0132, + "annual_emissions_tonnes_PM25": 0.0144, + "lifecycle_emissions_tonnes_NOx": 2.15, + "avert_emissions_region": "California", + "annual_emissions_tonnes_PM25_bau": 0.015600000000000001, + "annual_energy_supplied_kwh": 920618.46, + "electric_to_storage_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "distance_to_avert_emissions_region_meters": 0.0, + "lifecycle_emissions_tonnes_NOx_bau": 2.38, + "electric_to_load_series_kw_bau": [ + 31.876, + 31.876, + 31.876, + 32.165, + 32.388, + 32.759, + 32.725, + 11.701, + 61.786, + 61.326, + 114.313, + 114.512, + 149.959, + 149.812, + 149.485, + 148.975, + 151.609, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.869, + 78.357, + 131.408, + 197.598, + 197.981, + 198.183, + 198.205, + 198.047, + 197.722, + 197.211, + 199.6, + 216.707, + 168.489, + 168.492, + 150.852, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.547, + 78.334, + 131.506, + 197.95, + 198.04, + 198.239, + 198.265, + 198.12, + 197.785, + 197.262, + 199.85, + 216.707, + 168.518, + 168.721, + 151.093, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.658, + 78.498, + 131.793, + 197.616, + 198.003, + 198.203, + 198.224, + 198.077, + 197.749, + 197.241, + 199.845, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.407, + 78.333, + 132.345, + 198.669, + 198.956, + 199.038, + 199.059, + 198.6, + 198.12, + 197.842, + 200.186, + 217.36, + 169.265, + 169.393, + 151.75, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 32.132, + 32.88, + 32.841, + 33.064, + 71.197, + 61.694, + 96.869, + 149.463, + 197.4, + 197.405, + 197.705, + 198.001, + 197.697, + 197.214, + 199.857, + 216.707, + 150.775, + 115.348, + 115.368, + 80.213, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 32.031, + 32.061, + 32.114, + 11.573, + 60.936, + 60.72, + 114.241, + 114.45, + 149.912, + 149.787, + 149.476, + 148.985, + 151.645, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.587, + 78.487, + 131.798, + 197.622, + 198.02, + 198.249, + 198.278, + 198.133, + 197.814, + 197.293, + 199.909, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.617, + 78.099, + 130.812, + 197.579, + 197.962, + 198.173, + 198.2, + 198.067, + 197.757, + 197.266, + 199.924, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.299, + 77.977, + 131.162, + 197.553, + 197.694, + 198.294, + 199.167, + 198.59, + 198.537, + 198.049, + 200.568, + 216.758, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.17, + 78.033, + 130.748, + 196.626, + 197.819, + 198.059, + 197.698, + 197.593, + 197.702, + 197.125, + 199.923, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.145, + 77.935, + 131.094, + 197.537, + 197.932, + 198.151, + 198.181, + 198.04, + 197.737, + 197.257, + 199.954, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.872, + 60.189, + 95.686, + 149.309, + 197.897, + 198.929, + 201.794, + 205.582, + 207.757, + 203.466, + 199.976, + 217.96, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.513, + 60.248, + 60.792, + 114.469, + 117.858, + 154.315, + 153.88, + 153.884, + 153.086, + 150.402, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.415, + 60.997, + 60.71, + 113.792, + 114.066, + 148.911, + 149.78, + 148.585, + 148.016, + 147.989, + 133.062, + 97.656, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 72.055, + 78.576, + 131.317, + 197.505, + 197.91, + 198.14, + 198.184, + 198.063, + 197.767, + 197.277, + 196.564, + 216.707, + 168.489, + 168.489, + 150.785, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 72.113, + 78.868, + 132.257, + 198.451, + 198.83, + 198.597, + 198.144, + 198.488, + 198.311, + 197.86, + 197.282, + 217.648, + 169.581, + 169.609, + 151.814, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.148, + 33.158, + 33.216, + 72.404, + 78.723, + 131.159, + 196.979, + 197.556, + 197.739, + 197.723, + 197.216, + 197.138, + 196.614, + 196.209, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.35, + 77.96, + 130.38, + 196.666, + 197.001, + 196.956, + 198.149, + 198.04, + 197.099, + 196.914, + 196.209, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.942, + 32.204, + 32.265, + 32.304, + 70.631, + 60.762, + 95.98, + 149.326, + 197.938, + 198.171, + 197.017, + 196.327, + 196.405, + 196.175, + 196.186, + 216.707, + 150.775, + 115.348, + 115.348, + 79.969, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 32.186, + 32.412, + 32.572, + 32.831, + 11.947, + 60.762, + 60.447, + 113.945, + 114.066, + 149.568, + 149.205, + 148.916, + 148.872, + 148.417, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.244, + 33.107, + 71.731, + 78.48, + 131.308, + 197.54, + 197.922, + 198.156, + 198.207, + 198.084, + 197.8, + 197.338, + 196.636, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.252, + 33.274, + 71.623, + 78.3, + 131.238, + 197.515, + 197.393, + 197.785, + 197.896, + 197.791, + 197.705, + 197.246, + 196.591, + 216.721, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.536, + 77.757, + 130.612, + 196.644, + 198.957, + 201.756, + 201.458, + 210.612, + 217.676, + 214.575, + 204.937, + 216.414, + 170.607, + 170.495, + 152.783, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.007, + 77.277, + 130.382, + 196.595, + 198.376, + 212.506, + 224.271, + 233.115, + 237.342, + 237.856, + 229.742, + 235.345, + 180.247, + 171.697, + 152.829, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.525, + 77.29, + 130.764, + 197.345, + 204.03, + 220.137, + 233.125, + 242.381, + 240.403, + 229.2, + 213.147, + 224.624, + 179.883, + 173.853, + 153.127, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 65.393, + 59.681, + 95.73, + 149.484, + 198.15, + 208.065, + 226.654, + 228.412, + 222.99, + 213.882, + 202.456, + 215.369, + 151.001, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.599, + 60.468, + 60.901, + 114.509, + 117.231, + 153.689, + 153.549, + 153.206, + 151.793, + 149.762, + 129.635, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.545, + 78.001, + 131.222, + 197.644, + 198.029, + 198.23, + 198.262, + 197.694, + 197.617, + 196.892, + 196.359, + 213.281, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.015, + 78.188, + 131.586, + 197.599, + 197.678, + 197.851, + 197.86, + 197.703, + 197.478, + 197.092, + 196.449, + 213.281, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.134, + 78.18, + 130.911, + 196.87, + 197.306, + 198.318, + 198.372, + 198.261, + 197.962, + 197.479, + 196.665, + 213.281, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.59, + 78.143, + 131.569, + 197.632, + 197.933, + 198.148, + 198.219, + 198.129, + 197.875, + 197.418, + 196.709, + 213.281, + 168.489, + 168.489, + 150.829, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.73, + 78.289, + 131.789, + 197.953, + 197.805, + 197.917, + 197.848, + 198.222, + 197.929, + 197.479, + 196.811, + 213.281, + 168.604, + 168.804, + 151.24, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 32.006, + 67.647, + 61.139, + 96.146, + 149.46, + 198.072, + 198.287, + 198.327, + 198.203, + 197.928, + 197.48, + 196.82, + 209.854, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.949, + 28.668, + 11.84, + 61.124, + 60.87, + 114.395, + 114.608, + 150.081, + 149.956, + 149.68, + 149.237, + 148.583, + 126.209, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.128, + 78.098, + 131.035, + 197.087, + 197.64, + 197.817, + 197.716, + 197.487, + 197.444, + 196.943, + 196.408, + 209.854, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.707, + 78.319, + 131.663, + 197.585, + 197.984, + 198.213, + 198.279, + 197.862, + 197.584, + 197.219, + 196.584, + 209.854, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.924, + 78.215, + 131.232, + 197.263, + 197.579, + 197.921, + 197.602, + 197.524, + 197.236, + 197.131, + 196.539, + 209.854, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.02, + 78.01, + 131.255, + 197.299, + 197.178, + 197.021, + 197.611, + 197.709, + 197.096, + 196.967, + 196.398, + 209.854, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.812, + 78.663, + 131.282, + 197.247, + 197.386, + 197.732, + 196.625, + 197.542, + 200.173, + 200.899, + 199.787, + 211.431, + 168.632, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 62.819, + 59.797, + 95.252, + 148.275, + 205.083, + 216.793, + 216.111, + 215.997, + 215.695, + 215.091, + 212.459, + 218.694, + 153.011, + 116.124, + 115.542, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.318, + 60.291, + 60.866, + 114.692, + 115.89, + 152.835, + 154.781, + 157.072, + 157.733, + 155.068, + 128.388, + 97.684, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.44, + 77.449, + 131.136, + 203.635, + 219.248, + 231.274, + 241.577, + 249.635, + 243.545, + 237.051, + 225.776, + 224.907, + 172.008, + 170.842, + 152.421, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.389, + 77.467, + 131.191, + 198.477, + 210.472, + 229.884, + 227.574, + 223.398, + 223.014, + 221.217, + 217.127, + 215.655, + 171.592, + 170.477, + 151.9, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.537, + 77.629, + 131.227, + 197.738, + 198.165, + 198.381, + 198.915, + 199.599, + 199.271, + 198.736, + 197.938, + 207.114, + 168.635, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.558, + 77.666, + 131.411, + 197.721, + 198.104, + 198.317, + 198.363, + 198.239, + 197.96, + 197.518, + 196.884, + 206.428, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.161, + 78.23, + 131.631, + 197.742, + 198.083, + 198.374, + 198.549, + 198.471, + 198.083, + 197.668, + 197.202, + 206.818, + 168.947, + 169.073, + 151.421, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 64.059, + 61.256, + 96.619, + 149.523, + 198.105, + 198.32, + 198.363, + 198.247, + 197.961, + 197.28, + 196.305, + 206.428, + 150.775, + 115.348, + 115.357, + 80.121, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.467, + 60.829, + 60.405, + 113.751, + 113.59, + 148.604, + 149.28, + 149.285, + 148.967, + 148.422, + 122.783, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.318, + 60.771, + 60.178, + 112.994, + 113.392, + 150.231, + 149.584, + 149.769, + 149.331, + 148.68, + 122.845, + 97.901, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.194, + 33.723, + 33.906, + 62.098, + 79.048, + 131.743, + 197.712, + 198.095, + 198.315, + 198.373, + 198.275, + 198.02, + 197.568, + 196.933, + 206.464, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.407, + 33.466, + 61.664, + 78.484, + 131.343, + 197.662, + 198.033, + 198.272, + 198.351, + 198.271, + 198.018, + 197.585, + 196.945, + 206.472, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.069, + 78.339, + 130.857, + 196.554, + 196.433, + 197.556, + 197.859, + 197.736, + 197.393, + 197.124, + 196.627, + 206.434, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.098, + 78.238, + 131.635, + 197.887, + 198.308, + 198.455, + 198.511, + 198.5, + 198.226, + 197.747, + 197.045, + 206.453, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 59.852, + 60.516, + 95.945, + 149.615, + 198.219, + 198.395, + 198.405, + 198.264, + 198.019, + 197.625, + 197.002, + 203.027, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.753, + 60.781, + 61.013, + 114.568, + 114.778, + 150.256, + 149.631, + 148.277, + 148.055, + 148.114, + 119.413, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.03, + 78.244, + 131.383, + 197.776, + 198.174, + 198.405, + 198.464, + 198.359, + 198.09, + 197.648, + 196.99, + 203.082, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.179, + 33.342, + 58.029, + 77.989, + 131.436, + 197.884, + 197.874, + 197.965, + 198.517, + 198.495, + 198.201, + 196.286, + 196.315, + 203.009, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.252, + 58.042, + 78.694, + 131.746, + 197.917, + 198.324, + 198.472, + 198.525, + 198.512, + 198.227, + 197.757, + 196.171, + 203.057, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 58.026, + 78.139, + 131.1, + 196.831, + 197.103, + 197.559, + 196.377, + 197.552, + 197.036, + 196.415, + 196.539, + 203.002, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.95, + 77.813, + 131.103, + 197.111, + 197.396, + 197.758, + 197.537, + 197.464, + 197.08, + 196.787, + 196.43, + 203.002, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 56.048, + 60.102, + 95.537, + 149.123, + 197.861, + 198.394, + 201.312, + 215.605, + 219.888, + 212.484, + 207.214, + 205.999, + 151.286, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.188, + 11.79, + 60.602, + 60.561, + 115.042, + 123.776, + 171.9, + 170.413, + 169.808, + 169.753, + 160.491, + 119.948, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.53, + 77.971, + 131.656, + 197.912, + 198.144, + 197.622, + 198.382, + 198.288, + 197.692, + 197.589, + 196.555, + 203.202, + 168.779, + 168.949, + 151.312, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 57.794, + 78.658, + 131.753, + 197.273, + 198.131, + 198.334, + 197.945, + 198.31, + 198.036, + 197.587, + 196.976, + 203.115, + 168.489, + 168.513, + 150.902, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.948, + 78.358, + 131.818, + 197.931, + 197.886, + 198.025, + 197.864, + 197.866, + 197.799, + 197.339, + 197.039, + 203.026, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.726, + 78.008, + 131.453, + 197.95, + 198.319, + 198.478, + 198.517, + 198.41, + 198.133, + 197.687, + 196.858, + 199.67, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.283, + 77.865, + 131.526, + 197.872, + 198.224, + 198.391, + 198.373, + 198.214, + 197.986, + 197.272, + 196.815, + 199.711, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 52.499, + 60.453, + 96.011, + 149.654, + 198.231, + 198.429, + 198.462, + 198.354, + 198.07, + 197.633, + 197.016, + 199.728, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.794, + 60.471, + 60.319, + 114.299, + 114.283, + 149.705, + 149.9, + 149.587, + 149.416, + 148.911, + 113.142, + 80.606, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.58, + 81.11, + 131.093, + 197.39, + 197.938, + 198.31, + 198.489, + 198.529, + 198.403, + 198.115, + 197.67, + 197.039, + 151.529, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.114, + 81.462, + 131.326, + 197.47, + 197.912, + 198.276, + 198.478, + 198.527, + 198.408, + 198.12, + 197.681, + 197.056, + 151.547, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.056, + 81.419, + 131.221, + 197.431, + 197.902, + 198.223, + 198.405, + 198.442, + 198.343, + 198.087, + 197.662, + 197.05, + 151.55, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.766, + 78.563, + 131.633, + 197.506, + 197.948, + 198.315, + 198.496, + 198.527, + 198.406, + 198.107, + 197.662, + 197.047, + 151.546, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.75, + 78.512, + 131.48, + 197.379, + 197.829, + 198.158, + 198.311, + 198.392, + 198.313, + 198.07, + 197.663, + 197.066, + 151.565, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.962, + 60.504, + 95.902, + 149.234, + 197.989, + 198.358, + 198.521, + 198.564, + 198.478, + 198.198, + 197.573, + 196.819, + 133.797, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.421, + 60.772, + 60.884, + 114.388, + 114.744, + 150.31, + 150.343, + 150.222, + 149.946, + 149.504, + 113.466, + 80.735, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.432, + 78.291, + 131.436, + 197.501, + 198.019, + 198.374, + 198.525, + 198.556, + 198.407, + 198.11, + 197.68, + 197.087, + 151.585, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.716, + 78.491, + 131.434, + 197.087, + 197.799, + 198.038, + 197.998, + 198.01, + 197.942, + 197.508, + 197.649, + 197.06, + 148.146, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.388, + 78.32, + 131.696, + 197.724, + 198.33, + 198.837, + 199.093, + 198.809, + 198.365, + 198.087, + 198.019, + 197.605, + 148.629, + 169.243, + 151.676, + 60.908, + 33.107, + 33.107, + 33.107, + 33.232, + 33.608, + 33.8, + 34.179, + 34.375, + 69.002, + 79.472, + 132.259, + 197.841, + 197.857, + 198.134, + 198.297, + 198.38, + 198.319, + 198.081, + 197.654, + 197.051, + 148.145, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 68.216, + 78.52, + 131.571, + 197.183, + 197.484, + 198.122, + 198.041, + 198.026, + 197.862, + 197.768, + 197.598, + 196.772, + 148.071, + 168.489, + 150.809, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.844, + 60.728, + 96.195, + 148.973, + 197.679, + 198.237, + 198.403, + 198.415, + 198.275, + 197.491, + 197.423, + 196.806, + 130.415, + 115.348, + 115.348, + 79.955, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.443, + 61.169, + 60.729, + 114.231, + 114.614, + 150.244, + 150.287, + 149.973, + 150.137, + 149.714, + 113.397, + 77.289, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.626, + 77.993, + 131.172, + 197.492, + 198.27, + 202.73, + 205.711, + 204.484, + 205.411, + 205.217, + 204.375, + 199.632, + 149.443, + 168.633, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.543, + 78.009, + 131.385, + 197.511, + 197.995, + 198.314, + 198.486, + 198.546, + 198.425, + 198.146, + 197.695, + 196.524, + 148.168, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.544, + 78.032, + 131.207, + 197.438, + 197.898, + 200.209, + 211.74, + 214.552, + 214.045, + 213.221, + 206.057, + 200.116, + 149.283, + 168.584, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.492, + 77.929, + 130.82, + 197.099, + 197.911, + 204.942, + 212.804, + 214.605, + 215.671, + 216.096, + 214.491, + 209.688, + 152.195, + 170.015, + 151.616, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.478, + 77.547, + 130.993, + 197.593, + 198.706, + 210.662, + 226.437, + 234.334, + 232.707, + 225.533, + 218.405, + 212.375, + 153.034, + 169.595, + 151.14, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 62.392, + 59.833, + 95.516, + 149.322, + 209.589, + 225.987, + 232.107, + 231.126, + 233.294, + 237.1, + 233.403, + 221.214, + 136.33, + 116.045, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.487, + 60.726, + 60.954, + 114.497, + 114.854, + 150.394, + 150.428, + 150.355, + 150.043, + 149.583, + 113.511, + 77.361, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.441, + 78.283, + 131.591, + 197.625, + 198.068, + 198.39, + 198.547, + 198.544, + 198.024, + 198.139, + 197.708, + 197.114, + 148.213, + 165.063, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.438, + 78.226, + 131.452, + 197.289, + 197.593, + 198.15, + 198.34, + 198.411, + 198.325, + 198.084, + 197.66, + 197.082, + 148.198, + 165.063, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.356, + 78.172, + 131.376, + 197.102, + 197.706, + 198.314, + 198.511, + 198.559, + 198.445, + 198.167, + 197.734, + 197.12, + 148.213, + 165.063, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.303, + 78.15, + 131.503, + 197.639, + 198.126, + 198.457, + 198.603, + 198.643, + 198.55, + 198.246, + 197.116, + 197.119, + 148.213, + 165.063, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.61, + 78.001, + 131.323, + 197.627, + 198.133, + 198.488, + 198.609, + 198.64, + 198.517, + 198.216, + 197.755, + 197.124, + 148.222, + 165.063, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 59.181, + 60.162, + 95.811, + 149.393, + 198.09, + 198.395, + 198.539, + 198.529, + 198.392, + 198.242, + 198.076, + 197.465, + 130.772, + 111.994, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.491, + 60.26, + 60.744, + 116.645, + 129.278, + 173.128, + 171.701, + 171.356, + 171.508, + 169.721, + 122.453, + 78.797, + 28.45, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.012, + 77.568, + 131.028, + 197.543, + 199.006, + 203.411, + 203.498, + 203.442, + 203.344, + 202.912, + 202.321, + 201.494, + 149.93, + 165.733, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.309, + 77.755, + 131.156, + 197.597, + 198.066, + 199.796, + 204.394, + 202.072, + 201.979, + 201.75, + 201.122, + 200.262, + 150.286, + 165.94, + 150.896, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.172, + 77.486, + 131.141, + 197.033, + 198.098, + 196.58, + 197.424, + 200.864, + 219.001, + 228.012, + 245.485, + 253.714, + 195.654, + 198.018, + 171.933, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.633, + 77.33, + 131.053, + 200.225, + 216.941, + 227.993, + 235.449, + 240.219, + 238.187, + 234.288, + 232.12, + 225.908, + 168.393, + 174.865, + 152.221, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.969, + 77.293, + 131.039, + 198.044, + 210.901, + 225.469, + 237.72, + 238.623, + 233.493, + 227.738, + 222.762, + 217.373, + 160.437, + 167.277, + 151.574, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 55.532, + 59.946, + 95.732, + 149.478, + 198.183, + 198.729, + 199.381, + 199.405, + 199.291, + 199.019, + 198.548, + 197.906, + 131.159, + 111.973, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.176, + 11.552, + 60.549, + 60.812, + 114.374, + 114.622, + 150.165, + 150.262, + 150.411, + 150.16, + 149.746, + 113.55, + 77.395, + 28.45, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.759, + 77.607, + 131.06, + 197.571, + 198.001, + 200.19, + 207.008, + 209.226, + 209.49, + 210.704, + 210.531, + 210.047, + 156.984, + 163.131, + 151.564, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.733, + 77.634, + 131.089, + 197.55, + 197.947, + 198.198, + 198.343, + 198.406, + 198.33, + 198.079, + 197.674, + 197.109, + 148.254, + 161.636, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.881, + 77.779, + 131.191, + 197.562, + 197.694, + 197.941, + 198.439, + 198.449, + 198.34, + 198.078, + 197.685, + 196.911, + 148.265, + 161.639, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.892, + 77.742, + 131.126, + 197.581, + 197.992, + 198.395, + 200.054, + 201.852, + 201.679, + 201.415, + 200.952, + 200.249, + 149.663, + 162.36, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.647, + 77.671, + 131.149, + 197.524, + 197.949, + 198.272, + 198.392, + 198.354, + 198.182, + 197.899, + 197.562, + 197.059, + 148.248, + 161.636, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 55.77, + 60.152, + 95.945, + 149.336, + 197.944, + 198.198, + 198.312, + 198.318, + 198.213, + 197.982, + 197.607, + 197.08, + 130.543, + 108.495, + 115.392, + 80.169, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.757, + 11.556, + 61.412, + 61.31, + 114.523, + 115.13, + 150.474, + 150.434, + 150.287, + 149.839, + 149.421, + 113.456, + 77.432, + 25.024, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 54.881, + 78.843, + 132.061, + 198.433, + 198.734, + 198.99, + 199.086, + 198.651, + 198.404, + 198.128, + 197.716, + 197.151, + 148.386, + 161.993, + 151.239, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 54.919, + 78.719, + 131.951, + 197.849, + 198.021, + 197.999, + 197.271, + 197.482, + 197.587, + 196.663, + 196.622, + 196.451, + 148.009, + 161.636, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.96, + 78.085, + 131.239, + 197.062, + 197.247, + 196.691, + 197.557, + 197.976, + 197.79, + 197.115, + 197.259, + 196.833, + 148.279, + 161.636, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.582, + 77.916, + 131.437, + 197.678, + 198.069, + 198.376, + 198.544, + 198.566, + 197.277, + 197.605, + 196.756, + 196.499, + 147.99, + 161.636, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.638, + 77.888, + 131.362, + 197.655, + 198.083, + 198.377, + 198.516, + 198.492, + 198.346, + 198.06, + 197.663, + 197.099, + 148.279, + 161.636, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 52.22, + 60.12, + 95.932, + 149.411, + 198.058, + 198.365, + 198.478, + 198.428, + 198.26, + 197.974, + 197.601, + 197.102, + 130.877, + 108.911, + 115.771, + 80.478, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.777, + 11.612, + 61.439, + 61.381, + 114.553, + 114.661, + 150.152, + 150.11, + 149.988, + 149.747, + 149.38, + 113.412, + 77.407, + 21.597, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 53.668, + 78.176, + 131.73, + 197.847, + 198.096, + 198.423, + 198.517, + 198.428, + 198.319, + 198.045, + 197.629, + 197.129, + 148.307, + 158.337, + 150.979, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.603, + 78.155, + 131.48, + 197.633, + 198.036, + 198.306, + 198.409, + 200.941, + 203.978, + 208.98, + 210.422, + 209.436, + 153.967, + 158.601, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.141, + 77.818, + 131.204, + 197.589, + 197.978, + 198.235, + 198.333, + 198.288, + 199.825, + 202.535, + 201.991, + 201.22, + 148.805, + 158.244, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.968, + 77.728, + 131.143, + 197.562, + 197.95, + 198.216, + 198.322, + 198.306, + 198.159, + 197.931, + 197.561, + 197.046, + 148.273, + 158.21, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.868, + 77.725, + 131.168, + 197.494, + 197.863, + 198.155, + 198.311, + 198.343, + 198.235, + 197.994, + 197.605, + 197.072, + 148.284, + 158.215, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 48.735, + 60.07, + 95.784, + 149.315, + 197.78, + 198.103, + 198.134, + 198.48, + 198.353, + 197.713, + 197.495, + 196.993, + 130.548, + 105.079, + 115.348, + 79.942, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.376, + 11.657, + 60.681, + 60.846, + 114.381, + 114.656, + 150.253, + 148.779, + 148.955, + 149.925, + 149.509, + 113.193, + 77.463, + 21.603, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.485, + 78.178, + 131.51, + 196.943, + 198.101, + 198.405, + 198.567, + 198.307, + 197.224, + 196.383, + 197.467, + 196.857, + 148.332, + 158.228, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.257, + 77.804, + 131.254, + 197.681, + 197.55, + 198.378, + 198.504, + 198.49, + 197.697, + 197.704, + 197.639, + 197.087, + 148.293, + 158.217, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.15, + 77.804, + 131.151, + 197.553, + 197.949, + 198.232, + 198.396, + 198.424, + 198.98, + 200.775, + 200.307, + 199.653, + 150.72, + 158.218, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 50.137, + 77.854, + 131.215, + 197.594, + 198.008, + 198.316, + 202.558, + 208.58, + 209.816, + 209.902, + 209.614, + 208.547, + 154.501, + 159.088, + 150.792, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.923, + 77.681, + 131.136, + 197.605, + 198.018, + 199.991, + 210.455, + 215.186, + 215.302, + 216.774, + 216.146, + 214.754, + 162.381, + 161.347, + 151.387, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.501, + 59.957, + 95.74, + 149.424, + 198.051, + 198.37, + 198.558, + 210.345, + 220.083, + 221.632, + 221.123, + 219.99, + 145.07, + 103.859, + 115.584, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.373, + 11.668, + 60.528, + 60.975, + 114.524, + 114.788, + 150.352, + 150.341, + 150.259, + 150.208, + 149.802, + 113.748, + 77.498, + 18.205, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.857, + 77.746, + 131.223, + 197.686, + 198.094, + 198.377, + 198.528, + 200.139, + 204.02, + 204.241, + 204.069, + 203.631, + 155.359, + 155.587, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.772, + 77.707, + 131.194, + 197.682, + 198.114, + 198.41, + 198.562, + 198.503, + 198.973, + 201.307, + 201.225, + 199.022, + 148.735, + 154.819, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.66, + 77.536, + 131.158, + 197.64, + 198.048, + 198.329, + 198.486, + 198.639, + 200.403, + 200.962, + 200.139, + 198.593, + 148.63, + 154.821, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.732, + 77.654, + 131.164, + 197.658, + 198.094, + 198.402, + 198.564, + 198.585, + 198.441, + 199.751, + 199.872, + 199.211, + 148.389, + 154.828, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.87, + 77.737, + 131.234, + 197.659, + 198.037, + 198.267, + 198.375, + 198.367, + 198.266, + 198.031, + 197.675, + 197.137, + 148.347, + 154.835, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.957, + 60.248, + 96.048, + 149.458, + 198.178, + 198.352, + 198.421, + 198.397, + 198.247, + 197.967, + 197.614, + 197.123, + 130.635, + 101.693, + 115.355, + 80.138, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.376, + 11.65, + 61.091, + 61.106, + 114.366, + 114.591, + 150.112, + 150.066, + 149.908, + 149.716, + 149.401, + 113.466, + 77.486, + 18.219, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.514, + 78.057, + 131.34, + 197.549, + 197.942, + 198.225, + 198.382, + 198.408, + 198.297, + 198.045, + 197.662, + 197.13, + 148.345, + 154.837, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 50.307, + 77.912, + 131.266, + 197.572, + 197.932, + 198.262, + 201.186, + 206.695, + 209.62, + 209.848, + 209.486, + 208.626, + 159.033, + 157.041, + 150.811, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.764, + 77.597, + 131.106, + 197.542, + 197.922, + 199.742, + 208.054, + 212.171, + 212.198, + 212.071, + 211.594, + 210.818, + 159.957, + 156.537, + 150.932, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.759, + 77.62, + 130.964, + 197.622, + 198.031, + 197.871, + 198.463, + 198.465, + 198.343, + 201.022, + 203.578, + 202.897, + 151.453, + 155.007, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.82, + 77.658, + 131.185, + 197.665, + 198.079, + 198.368, + 198.518, + 198.531, + 198.414, + 198.149, + 197.747, + 197.196, + 148.386, + 154.861, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.914, + 60.199, + 95.968, + 149.445, + 198.079, + 198.379, + 198.522, + 198.533, + 198.402, + 198.134, + 197.738, + 197.183, + 130.668, + 98.288, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.4, + 11.68, + 60.738, + 60.892, + 114.327, + 114.602, + 150.608, + 167.915, + 165.794, + 157.515, + 157.019, + 114.859, + 77.588, + 14.824, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.386, + 11.661, + 60.285, + 60.902, + 132.048, + 135.402, + 166.907, + 168.401, + 170.389, + 170.444, + 169.738, + 130.538, + 87.346, + 14.817, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.437, + 77.423, + 131.116, + 198.195, + 211.705, + 235.053, + 252.899, + 261.447, + 261.569, + 254.971, + 246.972, + 240.612, + 183.692, + 178.883, + 168.732, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.364, + 77.406, + 131.681, + 226.602, + 235.713, + 241.975, + 244.944, + 246.708, + 247.286, + 246.021, + 243.686, + 238.624, + 182.275, + 176.94, + 166.821, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.363, + 77.402, + 130.926, + 196.931, + 200.588, + 210.577, + 217.727, + 223.872, + 224.602, + 225.747, + 224.432, + 222.984, + 168.471, + 160.833, + 151.862, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.608, + 77.459, + 131.094, + 197.567, + 197.926, + 198.178, + 198.35, + 198.185, + 197.673, + 197.768, + 197.527, + 196.937, + 148.277, + 151.418, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.973, + 60.116, + 95.573, + 148.602, + 197.56, + 197.818, + 198.064, + 198.053, + 197.952, + 197.057, + 196.958, + 196.732, + 130.458, + 98.291, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.394, + 11.661, + 60.49, + 60.752, + 114.264, + 114.507, + 150.011, + 149.958, + 149.835, + 149.642, + 149.327, + 113.419, + 77.504, + 14.841, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.802, + 77.668, + 131.134, + 197.523, + 197.899, + 198.17, + 198.322, + 198.353, + 198.252, + 198.013, + 197.644, + 197.147, + 148.386, + 151.469, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.836, + 77.578, + 130.822, + 196.563, + 196.656, + 197.866, + 197.647, + 198.386, + 198.305, + 197.66, + 197.687, + 197.152, + 148.388, + 151.436, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 50.074, + 77.807, + 131.248, + 197.618, + 198.031, + 198.319, + 198.479, + 198.536, + 198.625, + 199.03, + 198.631, + 198.065, + 148.549, + 151.477, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.777, + 77.676, + 131.231, + 197.711, + 198.148, + 198.445, + 199.479, + 203.489, + 206.401, + 207.604, + 207.12, + 206.32, + 156.823, + 152.569, + 150.818, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.857, + 77.743, + 131.41, + 197.758, + 198.167, + 198.453, + 198.57, + 198.456, + 198.436, + 198.169, + 197.774, + 197.235, + 148.435, + 151.5, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.542, + 59.924, + 95.765, + 149.428, + 198.022, + 198.266, + 198.385, + 198.366, + 199.875, + 200.703, + 200.328, + 199.805, + 130.691, + 98.349, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.386, + 11.654, + 60.564, + 60.85, + 114.329, + 114.567, + 150.1, + 150.09, + 149.989, + 149.78, + 149.439, + 113.526, + 77.555, + 14.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.706, + 77.584, + 131.117, + 197.564, + 197.96, + 198.248, + 198.414, + 198.479, + 199.859, + 201.002, + 200.556, + 199.954, + 148.702, + 151.5, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.65, + 77.555, + 131.142, + 197.646, + 197.99, + 198.271, + 198.5, + 198.52, + 199.908, + 202.839, + 203.095, + 202.418, + 150.68, + 151.566, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.573, + 77.457, + 131.159, + 197.631, + 198.033, + 198.318, + 198.591, + 201.629, + 203.016, + 204.906, + 206.64, + 205.71, + 153.635, + 148.709, + 150.853, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.631, + 77.549, + 131.143, + 197.595, + 197.949, + 198.167, + 198.241, + 198.236, + 198.192, + 198.02, + 197.686, + 197.185, + 148.411, + 148.063, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.614, + 77.479, + 131.108, + 197.53, + 197.917, + 198.194, + 198.998, + 202.415, + 205.02, + 207.329, + 207.295, + 206.634, + 157.437, + 153.445, + 151.035, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.19, + 59.686, + 95.691, + 149.367, + 198.052, + 204.29, + 213.137, + 221.06, + 222.596, + 222.156, + 221.656, + 220.124, + 145.747, + 98.037, + 115.632, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.395, + 11.65, + 60.269, + 60.792, + 114.31, + 114.55, + 151.861, + 155.448, + 158.752, + 161.712, + 161.12, + 115.472, + 77.64, + 11.454, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.592, + 77.457, + 131.122, + 197.577, + 197.94, + 198.159, + 200.225, + 202.302, + 202.243, + 202.012, + 201.515, + 200.84, + 149.004, + 148.454, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.72, + 77.518, + 131.099, + 197.529, + 198.568, + 202.561, + 203.808, + 211.375, + 214.676, + 214.528, + 213.722, + 212.629, + 162.676, + 153.584, + 151.363, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.625, + 77.494, + 131.093, + 197.533, + 197.9, + 198.661, + 204.952, + 210.247, + 211.829, + 211.452, + 210.608, + 209.644, + 160.303, + 151.846, + 151.081, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.625, + 77.47, + 131.105, + 197.553, + 197.938, + 201.587, + 210.595, + 211.477, + 214.201, + 215.703, + 214.857, + 213.411, + 161.33, + 150.72, + 151.184, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.339, + 77.381, + 131.092, + 197.533, + 197.923, + 201.993, + 211.4, + 219.362, + 223.458, + 225.11, + 223.537, + 222.029, + 168.694, + 158.499, + 151.966, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.106, + 59.665, + 95.656, + 149.302, + 198.816, + 222.072, + 230.131, + 228.075, + 229.314, + 230.975, + 231.874, + 229.917, + 149.408, + 98.463, + 115.77, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.387, + 11.615, + 60.131, + 60.603, + 114.236, + 114.5, + 150.048, + 150.589, + 153.351, + 155.183, + 155.592, + 116.929, + 77.883, + 11.447, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.46, + 77.391, + 131.01, + 197.422, + 197.798, + 198.454, + 205.724, + 212.76, + 219.263, + 222.379, + 221.338, + 219.283, + 162.647, + 151.066, + 151.328, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.494, + 77.392, + 131.04, + 197.438, + 197.804, + 198.44, + 208.941, + 215.481, + 215.395, + 214.34, + 213.577, + 213.338, + 160.529, + 149.284, + 151.007, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.511, + 77.394, + 131.047, + 197.483, + 197.854, + 199.418, + 205.382, + 212.203, + 215.591, + 215.35, + 214.507, + 213.027, + 159.858, + 149.928, + 151.256, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.644, + 77.426, + 131.102, + 208.855, + 225.202, + 235.04, + 241.845, + 248.509, + 250.113, + 247.926, + 243.72, + 239.029, + 182.067, + 173.751, + 168.609, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 26.254, + 49.349, + 77.393, + 131.159, + 209.292, + 219.07, + 225.6, + 231.261, + 237.241, + 244.178, + 248.092, + 245.753, + 239.604, + 183.305, + 171.517, + 165.669, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 48.18, + 59.655, + 95.679, + 160.389, + 224.706, + 237.013, + 243.426, + 248.123, + 249.595, + 250.676, + 249.718, + 243.889, + 161.974, + 112.507, + 120.306, + 80.07, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.365, + 11.604, + 60.257, + 60.793, + 114.309, + 114.543, + 150.117, + 150.149, + 150.057, + 149.845, + 149.498, + 113.584, + 77.601, + 11.477, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.51, + 77.402, + 131.115, + 197.594, + 197.985, + 198.252, + 198.407, + 200.191, + 202.558, + 207.423, + 209.434, + 208.604, + 159.324, + 158.255, + 154.363, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.448, + 77.376, + 131.109, + 197.567, + 204.422, + 217.272, + 221.23, + 225.853, + 229.423, + 232.84, + 232.204, + 229.879, + 175.352, + 165.814, + 160.19, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.363, + 11.601, + 60.22, + 60.71, + 114.163, + 114.413, + 149.618, + 150.03, + 149.875, + 149.671, + 149.341, + 113.496, + 77.554, + 11.446, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.338, + 77.361, + 131.012, + 197.431, + 197.792, + 198.05, + 200.553, + 206.438, + 209.385, + 212.161, + 211.728, + 210.746, + 161.21, + 156.634, + 151.861, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.358, + 77.398, + 131.0, + 197.419, + 197.784, + 198.051, + 198.21, + 198.859, + 202.889, + 205.547, + 205.656, + 205.042, + 155.94, + 155.151, + 152.202, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.105, + 59.643, + 95.611, + 149.278, + 197.887, + 198.173, + 205.417, + 223.655, + 235.753, + 237.333, + 235.864, + 233.576, + 153.504, + 104.874, + 116.392, + 79.977, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.366, + 11.585, + 60.203, + 60.748, + 114.292, + 114.577, + 153.245, + 157.446, + 167.583, + 177.716, + 178.856, + 140.623, + 93.214, + 11.469, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.331, + 77.351, + 133.342, + 229.275, + 234.922, + 240.434, + 246.703, + 252.15, + 256.308, + 258.3, + 254.161, + 247.744, + 188.869, + 177.08, + 171.21, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.337, + 77.304, + 135.833, + 226.347, + 240.963, + 251.914, + 255.224, + 258.52, + 261.024, + 265.931, + 266.733, + 261.251, + 202.442, + 189.129, + 179.807, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.344, + 77.374, + 135.118, + 233.077, + 244.994, + 254.22, + 256.669, + 258.264, + 258.834, + 258.244, + 253.404, + 246.375, + 189.283, + 178.504, + 171.283, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.32, + 77.342, + 131.066, + 212.631, + 234.252, + 248.323, + 254.392, + 258.325, + 260.379, + 257.538, + 251.838, + 244.116, + 186.721, + 174.967, + 167.839, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.316, + 77.33, + 131.057, + 197.778, + 203.491, + 218.098, + 229.175, + 232.449, + 234.291, + 234.818, + 233.318, + 230.655, + 175.949, + 166.179, + 157.499, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 48.061, + 59.568, + 95.461, + 148.955, + 198.319, + 209.308, + 223.211, + 230.211, + 231.552, + 232.613, + 231.967, + 230.65, + 155.016, + 108.288, + 117.925, + 79.99, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.341, + 11.562, + 60.133, + 60.637, + 114.152, + 114.434, + 155.186, + 168.866, + 174.21, + 177.08, + 177.174, + 132.734, + 85.498, + 11.431, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.32, + 77.319, + 131.006, + 197.463, + 197.854, + 204.933, + 216.132, + 224.547, + 229.295, + 232.796, + 230.848, + 228.366, + 174.759, + 166.084, + 159.964, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.314, + 77.322, + 131.04, + 197.512, + 205.636, + 218.2, + 224.222, + 229.066, + 232.689, + 235.638, + 236.28, + 234.712, + 178.969, + 169.655, + 165.776, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.312, + 77.321, + 131.047, + 197.526, + 197.929, + 198.213, + 204.052, + 211.414, + 212.788, + 213.665, + 214.652, + 213.933, + 164.869, + 165.399, + 156.431, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 29.681, + 49.31, + 77.316, + 131.035, + 197.51, + 197.912, + 202.304, + 212.438, + 223.216, + 231.407, + 234.601, + 234.122, + 232.274, + 180.029, + 175.51, + 167.43, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.31, + 77.312, + 131.041, + 200.388, + 227.034, + 245.521, + 252.088, + 256.252, + 258.014, + 259.582, + 254.455, + 247.8, + 188.506, + 179.355, + 170.69, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 48.081, + 59.603, + 95.594, + 149.277, + 208.379, + 229.878, + 240.184, + 242.173, + 240.897, + 243.822, + 243.89, + 238.849, + 158.523, + 115.638, + 122.218, + 80.188, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.359, + 11.553, + 60.132, + 60.644, + 114.556, + 119.885, + 169.824, + 174.947, + 175.295, + 176.404, + 176.961, + 137.095, + 90.097, + 14.768, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.275, + 77.082, + 130.387, + 198.237, + 214.666, + 234.875, + 244.331, + 255.175, + 256.27, + 262.43, + 255.386, + 245.785, + 187.105, + 180.486, + 171.613, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.314, + 77.309, + 130.97, + 217.049, + 238.644, + 250.839, + 255.026, + 257.302, + 259.442, + 265.608, + 257.123, + 245.41, + 184.83, + 179.315, + 171.492, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.308, + 77.296, + 130.995, + 197.462, + 203.014, + 217.763, + 226.52, + 234.183, + 239.323, + 240.605, + 240.509, + 239.639, + 186.009, + 179.443, + 172.16, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.307, + 77.296, + 130.995, + 199.288, + 216.773, + 236.923, + 242.839, + 247.794, + 249.957, + 248.685, + 248.005, + 243.733, + 185.783, + 179.764, + 171.138, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.309, + 77.297, + 130.979, + 197.434, + 201.751, + 220.837, + 232.025, + 236.5, + 238.235, + 238.541, + 237.495, + 234.908, + 178.49, + 172.816, + 166.763, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 48.079, + 59.588, + 95.559, + 149.228, + 201.346, + 208.822, + 213.227, + 217.649, + 221.298, + 223.976, + 225.358, + 224.812, + 153.484, + 115.708, + 130.113, + 85.304, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.348, + 11.539, + 60.132, + 63.697, + 142.138, + 154.255, + 193.43, + 194.114, + 195.01, + 195.37, + 195.976, + 151.677, + 102.841, + 14.822, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.305, + 77.298, + 130.985, + 197.902, + 214.961, + 234.064, + 244.264, + 250.344, + 252.465, + 254.501, + 251.019, + 244.354, + 185.215, + 178.817, + 170.841, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.303, + 77.298, + 130.972, + 199.383, + 209.334, + 225.161, + 236.979, + 245.021, + 250.269, + 252.866, + 250.82, + 245.486, + 186.793, + 178.637, + 169.942, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.275, + 77.219, + 130.258, + 219.943, + 234.175, + 244.326, + 246.702, + 247.393, + 250.057, + 250.342, + 247.18, + 239.91, + 180.714, + 175.344, + 166.738, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 49.302, + 77.3, + 130.969, + 207.739, + 231.432, + 241.814, + 245.269, + 249.522, + 248.494, + 245.543, + 242.456, + 238.754, + 182.421, + 175.99, + 167.161, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.723, + 77.287, + 130.987, + 201.74, + 215.865, + 226.234, + 233.049, + 238.364, + 242.077, + 243.684, + 239.716, + 231.176, + 171.64, + 168.251, + 153.667, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 51.493, + 59.586, + 95.547, + 149.266, + 207.149, + 220.453, + 229.347, + 234.389, + 235.513, + 235.686, + 235.415, + 232.748, + 152.553, + 110.199, + 116.308, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.766, + 11.569, + 60.125, + 60.657, + 114.21, + 114.511, + 150.115, + 150.16, + 150.058, + 149.843, + 149.469, + 113.536, + 77.521, + 18.22, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.961, + 77.382, + 131.033, + 197.552, + 197.984, + 198.301, + 199.766, + 207.4, + 209.526, + 209.833, + 209.498, + 208.408, + 158.306, + 156.337, + 150.988, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.716, + 77.285, + 131.022, + 214.523, + 232.283, + 244.806, + 253.997, + 264.754, + 268.69, + 263.111, + 257.516, + 252.494, + 195.05, + 192.178, + 181.044, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.716, + 77.286, + 143.585, + 245.552, + 265.924, + 275.913, + 281.055, + 287.524, + 286.29, + 286.604, + 282.944, + 277.399, + 207.562, + 193.572, + 178.575, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.715, + 77.282, + 149.295, + 249.005, + 255.924, + 264.376, + 273.826, + 278.807, + 277.033, + 274.24, + 268.317, + 257.994, + 193.38, + 184.759, + 169.919, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.713, + 77.279, + 131.011, + 197.5, + 202.32, + 214.447, + 220.713, + 225.272, + 228.127, + 230.443, + 228.694, + 225.957, + 169.147, + 165.733, + 153.521, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 51.484, + 59.566, + 95.576, + 153.699, + 229.432, + 246.055, + 254.553, + 255.886, + 257.187, + 259.043, + 259.144, + 251.182, + 166.073, + 124.489, + 130.631, + 83.16, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.757, + 11.516, + 61.486, + 78.433, + 149.651, + 155.419, + 196.645, + 202.392, + 204.54, + 205.204, + 205.776, + 156.105, + 104.859, + 18.196, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.713, + 77.271, + 135.828, + 232.09, + 246.585, + 256.102, + 262.828, + 268.499, + 269.489, + 268.927, + 268.12, + 259.909, + 196.557, + 192.584, + 176.892, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.712, + 77.268, + 133.382, + 230.762, + 244.222, + 257.087, + 266.113, + 270.308, + 272.671, + 268.765, + 259.014, + 247.782, + 182.821, + 180.37, + 165.451, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.71, + 77.284, + 132.409, + 228.136, + 240.934, + 250.334, + 260.798, + 266.984, + 265.591, + 266.083, + 265.641, + 259.132, + 198.495, + 196.651, + 180.49, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 52.709, + 77.281, + 134.702, + 228.899, + 248.385, + 262.438, + 269.03, + 271.686, + 270.958, + 270.18, + 268.348, + 261.618, + 203.389, + 202.534, + 185.334, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.138, + 77.276, + 134.113, + 229.228, + 244.962, + 257.275, + 263.022, + 266.233, + 267.37, + 270.227, + 262.776, + 256.111, + 195.972, + 192.713, + 176.597, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 54.907, + 59.553, + 95.532, + 149.221, + 198.461, + 206.635, + 215.582, + 221.069, + 223.257, + 225.508, + 225.569, + 222.83, + 145.443, + 108.082, + 116.021, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.183, + 11.519, + 60.13, + 60.699, + 114.094, + 114.563, + 153.565, + 165.884, + 173.038, + 174.365, + 173.327, + 127.011, + 78.612, + 21.597, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.136, + 77.269, + 131.001, + 197.498, + 197.907, + 201.197, + 218.98, + 230.587, + 231.911, + 230.99, + 229.668, + 224.654, + 164.211, + 164.213, + 152.035, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.134, + 77.265, + 130.979, + 197.471, + 200.18, + 208.431, + 214.227, + 222.54, + 232.746, + 239.881, + 237.406, + 232.055, + 173.09, + 174.004, + 158.175, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.133, + 77.261, + 130.974, + 197.47, + 199.547, + 211.49, + 222.097, + 230.138, + 237.196, + 243.504, + 240.95, + 235.841, + 178.571, + 184.129, + 165.084, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.133, + 77.271, + 130.998, + 199.076, + 213.606, + 227.262, + 239.159, + 247.51, + 246.787, + 245.234, + 242.83, + 238.494, + 180.223, + 184.525, + 168.283, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.131, + 77.265, + 130.996, + 218.05, + 232.757, + 247.24, + 255.313, + 260.798, + 264.952, + 261.375, + 251.496, + 242.066, + 184.224, + 188.559, + 171.178, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 54.899, + 59.547, + 95.503, + 158.131, + 231.897, + 249.023, + 254.035, + 256.622, + 255.942, + 254.796, + 253.924, + 245.943, + 162.185, + 127.835, + 128.395, + 82.915, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.171, + 11.515, + 60.065, + 60.512, + 125.654, + 136.951, + 178.549, + 181.362, + 182.124, + 180.457, + 179.805, + 138.121, + 93.448, + 25.024, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 77.258, + 130.968, + 220.966, + 238.093, + 249.2, + 256.329, + 262.289, + 260.687, + 258.54, + 252.884, + 245.391, + 186.195, + 188.321, + 169.413, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 77.25, + 130.939, + 200.518, + 216.297, + 229.745, + 236.632, + 241.426, + 242.376, + 241.672, + 239.229, + 236.251, + 180.758, + 184.477, + 165.494, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 77.25, + 130.932, + 197.368, + 202.803, + 215.629, + 222.1, + 226.606, + 232.659, + 236.983, + 236.407, + 234.548, + 178.449, + 181.391, + 163.898, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 77.191, + 130.921, + 197.613, + 207.661, + 228.24, + 242.072, + 247.84, + 247.253, + 245.421, + 244.505, + 238.76, + 183.273, + 190.751, + 169.256, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.128, + 77.258, + 130.897, + 205.114, + 221.54, + 233.027, + 239.47, + 244.499, + 245.412, + 243.846, + 241.358, + 238.057, + 180.32, + 182.821, + 156.014, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 58.323, + 59.545, + 95.535, + 149.211, + 197.84, + 207.325, + 223.086, + 233.399, + 244.14, + 246.909, + 244.843, + 238.973, + 153.185, + 120.233, + 117.733, + 80.535, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.5, + 60.112, + 60.633, + 114.136, + 115.699, + 170.564, + 181.378, + 183.243, + 183.002, + 183.427, + 139.301, + 91.083, + 28.45, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.496, + 60.089, + 60.629, + 114.185, + 114.467, + 154.806, + 160.92, + 161.624, + 161.557, + 161.431, + 124.339, + 78.866, + 28.45, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.262, + 130.944, + 197.407, + 197.816, + 199.573, + 207.856, + 221.824, + 228.15, + 227.212, + 225.798, + 223.927, + 169.977, + 177.752, + 153.747, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.254, + 130.926, + 197.391, + 201.709, + 218.706, + 226.606, + 235.56, + 241.286, + 243.194, + 241.061, + 238.121, + 179.805, + 188.146, + 167.827, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.254, + 130.923, + 201.605, + 217.962, + 238.561, + 248.078, + 251.822, + 257.483, + 255.759, + 251.085, + 245.174, + 188.127, + 197.271, + 177.629, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.258, + 132.063, + 225.23, + 242.825, + 252.484, + 256.965, + 262.727, + 266.225, + 265.385, + 259.518, + 253.725, + 196.994, + 206.927, + 182.184, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 58.323, + 59.551, + 95.623, + 172.759, + 246.739, + 259.151, + 264.686, + 268.197, + 268.369, + 264.689, + 259.582, + 253.684, + 171.204, + 144.942, + 140.346, + 98.048, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.513, + 60.381, + 71.164, + 147.046, + 163.426, + 208.863, + 211.688, + 214.132, + 211.13, + 203.28, + 155.112, + 102.718, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.266, + 131.011, + 208.514, + 235.69, + 252.392, + 254.968, + 255.411, + 255.769, + 255.818, + 253.281, + 245.641, + 183.595, + 195.399, + 173.321, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.257, + 130.966, + 197.978, + 210.32, + 226.933, + 239.627, + 246.849, + 247.426, + 246.7, + 245.408, + 241.274, + 183.1, + 194.855, + 170.567, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.256, + 130.947, + 197.754, + 209.194, + 222.537, + 229.391, + 237.771, + 243.308, + 244.867, + 241.307, + 235.956, + 178.976, + 190.137, + 165.915, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.258, + 130.93, + 197.407, + 197.839, + 216.099, + 238.694, + 244.314, + 243.713, + 242.351, + 238.744, + 231.692, + 172.157, + 184.899, + 163.563, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.554, + 77.266, + 130.905, + 197.37, + 202.269, + 212.093, + 214.152, + 214.678, + 218.948, + 224.05, + 224.132, + 222.694, + 174.798, + 185.488, + 163.359, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 61.75, + 59.562, + 95.578, + 149.342, + 198.039, + 203.209, + 207.169, + 210.153, + 212.271, + 213.334, + 213.433, + 212.25, + 147.556, + 121.546, + 116.464, + 80.045, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.517, + 60.18, + 60.81, + 114.614, + 122.017, + 173.897, + 183.904, + 187.133, + 186.078, + 184.157, + 135.012, + 88.123, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.274, + 131.02, + 197.57, + 198.764, + 205.055, + 208.922, + 210.997, + 212.054, + 212.204, + 211.488, + 210.193, + 163.835, + 176.411, + 152.162, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.268, + 130.991, + 197.502, + 197.927, + 198.199, + 200.501, + 210.895, + 215.167, + 215.509, + 215.156, + 213.617, + 166.941, + 180.033, + 153.998, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.264, + 130.949, + 197.467, + 197.927, + 198.247, + 198.407, + 198.42, + 198.273, + 199.139, + 202.674, + 204.068, + 158.111, + 169.819, + 151.179, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.026, + 77.269, + 130.998, + 197.533, + 197.972, + 200.039, + 208.024, + 215.802, + 218.948, + 218.512, + 217.644, + 216.359, + 167.249, + 176.769, + 152.636, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.025, + 77.265, + 130.966, + 197.471, + 197.916, + 205.56, + 219.511, + 224.643, + 226.306, + 227.186, + 226.646, + 224.426, + 177.087, + 184.169, + 160.818, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 61.75, + 59.549, + 95.49, + 151.786, + 216.507, + 229.683, + 241.795, + 250.425, + 253.789, + 254.249, + 253.972, + 249.847, + 171.84, + 138.143, + 133.964, + 88.935, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.512, + 60.152, + 67.992, + 144.878, + 163.804, + 209.975, + 213.058, + 220.949, + 220.802, + 215.338, + 175.318, + 121.368, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.269, + 144.642, + 243.003, + 267.773, + 294.534, + 297.698, + 293.43, + 290.917, + 287.653, + 278.505, + 264.855, + 205.654, + 208.069, + 185.641, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.266, + 140.653, + 238.004, + 251.169, + 263.21, + 277.911, + 285.471, + 282.358, + 283.258, + 278.228, + 264.81, + 205.987, + 209.182, + 186.043, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.256, + 130.937, + 197.428, + 199.875, + 216.534, + 222.937, + 228.996, + 232.282, + 231.653, + 230.965, + 226.831, + 175.805, + 181.45, + 155.446, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.265, + 130.965, + 197.468, + 200.706, + 217.831, + 224.184, + 226.714, + 227.543, + 226.791, + 224.636, + 221.274, + 173.238, + 178.093, + 154.003, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 62.98, + 77.227, + 130.874, + 197.223, + 197.903, + 204.956, + 219.578, + 225.196, + 224.557, + 222.925, + 222.342, + 219.284, + 174.325, + 179.378, + 154.294, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 61.75, + 59.538, + 95.494, + 149.183, + 197.815, + 197.947, + 198.956, + 208.215, + 214.611, + 215.345, + 214.986, + 213.707, + 150.55, + 116.098, + 115.358, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.494, + 60.071, + 60.637, + 114.024, + 114.325, + 149.681, + 149.009, + 149.284, + 148.725, + 148.77, + 112.64, + 87.355, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.636, + 77.393, + 130.914, + 197.381, + 198.217, + 213.25, + 228.913, + 240.052, + 242.976, + 239.456, + 232.966, + 224.425, + 175.316, + 176.551, + 154.233, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 77.181, + 130.847, + 197.392, + 197.821, + 198.108, + 199.283, + 201.637, + 201.45, + 201.113, + 200.591, + 199.811, + 159.809, + 169.604, + 151.465, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.577, + 77.298, + 130.917, + 197.424, + 198.565, + 205.713, + 212.636, + 215.34, + 215.09, + 214.418, + 213.368, + 211.852, + 171.202, + 173.369, + 153.622, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.452, + 77.245, + 130.933, + 197.603, + 201.922, + 209.47, + 219.041, + 228.384, + 230.437, + 230.279, + 229.424, + 226.65, + 180.121, + 185.293, + 162.607, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 77.228, + 130.371, + 196.868, + 211.213, + 237.714, + 251.316, + 257.656, + 257.594, + 258.046, + 251.211, + 240.727, + 192.361, + 192.849, + 166.779, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 65.176, + 59.548, + 95.562, + 149.329, + 198.168, + 208.12, + 221.606, + 224.14, + 226.055, + 225.85, + 224.922, + 222.812, + 157.365, + 118.957, + 117.713, + 80.604, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.502, + 60.122, + 60.741, + 114.55, + 117.715, + 161.361, + 170.55, + 174.017, + 173.439, + 171.15, + 118.461, + 92.591, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.495, + 60.097, + 60.699, + 114.95, + 130.391, + 176.531, + 173.724, + 172.769, + 169.392, + 163.858, + 114.992, + 90.858, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 77.251, + 130.949, + 197.467, + 201.804, + 212.97, + 213.457, + 214.171, + 214.628, + 214.443, + 213.432, + 211.637, + 172.194, + 172.33, + 153.998, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 77.243, + 130.926, + 197.429, + 197.878, + 206.914, + 222.268, + 223.129, + 222.561, + 221.286, + 220.003, + 216.218, + 173.245, + 171.656, + 152.64, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 77.239, + 130.92, + 197.442, + 198.12, + 202.908, + 210.846, + 215.324, + 216.736, + 216.514, + 215.192, + 213.121, + 175.4, + 173.341, + 154.116, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.407, + 77.242, + 130.926, + 197.443, + 197.935, + 198.831, + 200.302, + 201.543, + 202.674, + 202.823, + 202.11, + 201.304, + 164.875, + 171.12, + 152.377, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 68.602, + 59.527, + 95.496, + 149.213, + 197.863, + 198.114, + 198.206, + 200.793, + 209.132, + 209.736, + 208.814, + 207.41, + 148.697, + 115.496, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.477, + 60.045, + 60.592, + 113.909, + 114.208, + 149.94, + 149.692, + 149.414, + 149.498, + 148.879, + 112.921, + 94.208, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.951, + 77.279, + 130.84, + 197.328, + 197.773, + 198.044, + 199.414, + 201.297, + 204.194, + 205.265, + 204.556, + 203.493, + 168.085, + 170.085, + 151.897, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.124, + 77.272, + 130.885, + 197.381, + 198.048, + 202.087, + 208.612, + 213.188, + 216.071, + 217.008, + 215.954, + 213.778, + 175.664, + 172.564, + 154.01, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.833, + 77.224, + 130.906, + 197.421, + 199.947, + 203.293, + 203.524, + 212.696, + 222.524, + 222.039, + 218.496, + 212.574, + 170.933, + 171.946, + 153.328, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.833, + 77.224, + 130.914, + 201.98, + 217.966, + 217.785, + 218.349, + 218.421, + 218.545, + 218.3, + 216.721, + 215.543, + 178.777, + 173.309, + 154.675, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.833, + 77.211, + 131.202, + 213.225, + 231.365, + 254.341, + 254.743, + 251.835, + 251.233, + 251.691, + 240.483, + 223.651, + 180.041, + 173.903, + 155.364, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 68.602, + 59.485, + 95.464, + 149.185, + 197.851, + 198.122, + 198.237, + 198.24, + 210.463, + 218.048, + 216.316, + 212.897, + 149.481, + 115.382, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.43, + 60.059, + 60.606, + 114.187, + 114.44, + 149.967, + 149.922, + 149.755, + 149.447, + 148.965, + 112.84, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.963, + 77.349, + 130.924, + 197.401, + 197.854, + 198.142, + 198.27, + 199.271, + 213.44, + 218.518, + 216.94, + 212.928, + 172.891, + 168.588, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.01, + 77.269, + 130.879, + 197.398, + 197.841, + 198.117, + 199.224, + 202.204, + 208.241, + 210.887, + 209.78, + 208.262, + 172.22, + 170.275, + 152.008, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.007, + 77.231, + 130.825, + 197.321, + 197.769, + 199.393, + 205.312, + 210.237, + 209.451, + 208.319, + 207.884, + 206.682, + 171.518, + 169.838, + 151.854, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.971, + 80.624, + 130.822, + 197.321, + 197.789, + 198.084, + 198.259, + 199.103, + 199.589, + 199.18, + 198.595, + 197.891, + 169.914, + 169.806, + 151.616, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.385, + 80.892, + 130.836, + 197.374, + 197.868, + 200.506, + 205.182, + 205.881, + 205.62, + 205.271, + 204.501, + 202.959, + 171.497, + 170.531, + 151.882, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.127, + 63.281, + 95.491, + 149.242, + 197.937, + 198.234, + 199.502, + 201.323, + 201.764, + 201.297, + 200.599, + 199.634, + 152.707, + 115.704, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.819, + 60.113, + 60.659, + 114.276, + 115.288, + 157.933, + 163.571, + 163.857, + 159.382, + 155.135, + 115.0, + 97.638, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.311, + 80.872, + 130.876, + 197.405, + 199.083, + 213.75, + 230.915, + 239.962, + 245.691, + 249.337, + 241.23, + 228.821, + 187.854, + 181.884, + 158.514, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.889, + 80.576, + 130.865, + 197.473, + 204.332, + 223.253, + 236.665, + 246.378, + 244.135, + 235.745, + 224.943, + 216.265, + 181.486, + 173.903, + 153.024, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.899, + 80.582, + 130.851, + 197.616, + 210.429, + 222.862, + 222.538, + 222.203, + 222.154, + 221.738, + 220.961, + 219.61, + 176.705, + 171.378, + 152.881, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 69.929, + 80.598, + 130.837, + 197.364, + 197.86, + 197.945, + 199.367, + 200.791, + 201.61, + 200.769, + 200.397, + 202.835, + 170.482, + 169.389, + 150.876, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.588, + 81.034, + 130.845, + 197.344, + 197.819, + 198.24, + 199.848, + 201.431, + 201.729, + 201.365, + 200.659, + 203.167, + 171.222, + 169.922, + 151.357, + 60.908, + 33.107, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.102, + 63.221, + 95.48, + 149.204, + 197.917, + 198.234, + 198.366, + 198.322, + 198.12, + 197.745, + 197.188, + 199.821, + 150.775, + 115.348, + 115.348, + 79.944, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.778, + 60.517, + 60.686, + 114.214, + 114.52, + 150.074, + 150.035, + 149.837, + 149.482, + 148.915, + 116.143, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 57.123, + 77.793, + 131.398, + 197.8, + 198.104, + 198.3, + 199.77, + 201.016, + 200.791, + 200.154, + 202.582, + 219.223, + 169.857, + 169.179, + 150.796, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.887, + 77.898, + 131.381, + 197.769, + 198.055, + 204.042, + 213.843, + 214.449, + 213.868, + 211.936, + 205.636, + 219.514, + 169.83, + 169.361, + 151.025, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.545, + 77.727, + 131.363, + 197.734, + 198.746, + 206.332, + 212.402, + 212.439, + 211.684, + 210.481, + 211.053, + 220.906, + 170.663, + 169.767, + 151.694, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.68, + 77.672, + 131.388, + 204.12, + 220.224, + 229.849, + 237.244, + 235.648, + 229.469, + 222.486, + 220.988, + 232.774, + 174.978, + 171.446, + 152.94, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.263, + 77.631, + 131.332, + 198.982, + 213.181, + 227.352, + 232.354, + 233.889, + 231.418, + 227.846, + 223.348, + 230.926, + 173.203, + 172.218, + 153.733, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 54.955, + 59.928, + 95.937, + 150.573, + 215.369, + 225.289, + 226.06, + 227.189, + 231.245, + 230.575, + 223.85, + 232.247, + 154.424, + 118.032, + 117.506, + 80.336, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 18.171, + 11.79, + 60.403, + 60.894, + 114.377, + 114.51, + 149.908, + 149.185, + 149.796, + 149.32, + 155.334, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.589, + 77.655, + 130.911, + 197.68, + 198.012, + 198.153, + 198.132, + 197.956, + 197.612, + 197.063, + 203.153, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.765, + 77.372, + 130.922, + 197.688, + 198.04, + 200.43, + 207.798, + 211.896, + 211.359, + 210.445, + 208.936, + 219.624, + 170.533, + 169.439, + 150.941, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 56.956, + 77.3, + 131.288, + 197.162, + 198.03, + 198.18, + 198.166, + 198.152, + 197.926, + 197.344, + 203.309, + 216.952, + 168.553, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 58.108, + 79.175, + 132.69, + 198.564, + 198.401, + 198.625, + 198.414, + 197.956, + 197.787, + 197.19, + 203.376, + 217.18, + 168.997, + 168.978, + 151.285, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 61.214, + 78.387, + 131.423, + 197.856, + 198.186, + 198.321, + 198.279, + 198.084, + 197.715, + 197.118, + 203.145, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 59.146, + 60.089, + 95.92, + 149.549, + 198.093, + 198.253, + 198.805, + 198.863, + 198.489, + 197.726, + 203.797, + 217.405, + 151.021, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.551, + 60.224, + 60.959, + 113.983, + 114.199, + 148.955, + 148.681, + 148.252, + 148.671, + 154.805, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.25, + 78.048, + 130.992, + 197.657, + 197.457, + 197.552, + 196.676, + 198.252, + 198.253, + 197.644, + 203.669, + 217.258, + 168.778, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.08, + 77.593, + 131.277, + 200.309, + 219.064, + 233.036, + 241.627, + 244.074, + 238.942, + 231.655, + 227.37, + 233.055, + 175.466, + 172.643, + 154.018, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 59.575, + 77.545, + 131.278, + 199.714, + 203.693, + 212.801, + 217.463, + 218.882, + 218.853, + 218.094, + 221.156, + 223.676, + 172.458, + 171.222, + 152.156, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.513, + 60.079, + 60.415, + 114.311, + 114.468, + 149.875, + 149.698, + 149.344, + 148.506, + 154.805, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.472, + 78.194, + 131.578, + 197.749, + 198.093, + 198.26, + 198.868, + 199.308, + 198.855, + 198.105, + 203.858, + 216.75, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 58.961, + 59.967, + 96.117, + 149.501, + 198.03, + 198.186, + 198.17, + 197.993, + 197.639, + 197.069, + 203.107, + 216.707, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 21.597, + 11.51, + 60.429, + 60.888, + 114.32, + 114.48, + 149.896, + 149.717, + 149.355, + 148.813, + 154.883, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 60.177, + 77.339, + 131.261, + 197.711, + 200.295, + 208.475, + 218.525, + 222.481, + 223.58, + 222.308, + 222.91, + 229.509, + 173.341, + 171.073, + 151.715, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.859, + 77.608, + 130.845, + 197.197, + 197.634, + 198.168, + 198.957, + 199.249, + 198.872, + 198.388, + 204.354, + 217.569, + 168.598, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.403, + 77.647, + 130.87, + 197.602, + 197.946, + 199.456, + 202.352, + 202.917, + 202.394, + 201.629, + 207.024, + 219.182, + 169.432, + 168.57, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.31, + 77.996, + 131.214, + 197.629, + 198.097, + 200.602, + 201.463, + 201.195, + 200.765, + 199.667, + 205.814, + 217.926, + 168.863, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.044, + 77.566, + 130.611, + 196.76, + 196.183, + 196.346, + 196.222, + 196.241, + 196.41, + 196.319, + 203.086, + 216.707, + 168.489, + 168.489, + 150.799, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 63.269, + 60.801, + 96.51, + 149.351, + 197.587, + 197.542, + 197.661, + 197.218, + 196.573, + 196.207, + 203.002, + 216.707, + 150.787, + 115.523, + 115.624, + 80.35, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 25.024, + 11.425, + 61.463, + 61.032, + 114.113, + 114.809, + 150.102, + 150.316, + 149.996, + 149.806, + 155.921, + 133.933, + 98.635, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 65.086, + 78.799, + 131.08, + 197.712, + 197.114, + 197.357, + 197.491, + 196.775, + 196.164, + 197.023, + 203.015, + 216.707, + 168.489, + 168.489, + 150.798, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.307, + 77.984, + 131.235, + 197.686, + 198.572, + 205.002, + 209.113, + 203.747, + 202.237, + 200.461, + 207.976, + 217.122, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.609, + 77.512, + 131.19, + 197.609, + 197.941, + 198.392, + 198.393, + 198.604, + 197.773, + 197.397, + 207.05, + 217.225, + 168.988, + 168.64, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 63.636, + 77.637, + 131.191, + 197.629, + 197.967, + 198.138, + 198.123, + 197.388, + 197.581, + 197.022, + 206.507, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 64.106, + 77.888, + 131.223, + 197.654, + 198.036, + 199.106, + 199.704, + 199.513, + 199.127, + 198.563, + 207.975, + 217.903, + 169.328, + 168.531, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.204, + 60.355, + 95.898, + 149.449, + 197.865, + 197.925, + 198.153, + 197.631, + 197.612, + 197.06, + 206.518, + 216.707, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.615, + 60.507, + 60.82, + 114.317, + 114.511, + 149.957, + 148.597, + 148.382, + 148.819, + 158.288, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.347, + 33.392, + 33.37, + 68.291, + 78.65, + 131.679, + 197.302, + 197.172, + 198.13, + 196.227, + 196.746, + 196.368, + 196.572, + 203.057, + 216.707, + 168.501, + 168.921, + 151.62, + 60.908, + 33.107, + 33.107, + 33.107, + 33.25, + 33.265, + 33.803, + 34.096, + 34.422, + 68.957, + 78.938, + 131.615, + 197.645, + 198.011, + 198.204, + 198.198, + 198.01, + 197.639, + 197.074, + 203.096, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.314, + 33.582, + 34.004, + 34.072, + 34.376, + 68.876, + 78.617, + 131.335, + 197.643, + 198.01, + 198.189, + 198.177, + 198.001, + 197.634, + 197.072, + 203.104, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.402, + 33.526, + 33.539, + 33.8, + 34.142, + 68.678, + 78.238, + 130.73, + 197.58, + 197.91, + 198.052, + 198.063, + 197.912, + 197.577, + 197.037, + 203.095, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.216, + 33.336, + 68.178, + 77.987, + 130.753, + 197.589, + 197.462, + 197.54, + 197.647, + 196.568, + 197.399, + 197.244, + 203.172, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.533, + 60.323, + 95.77, + 149.418, + 198.019, + 198.72, + 199.832, + 199.585, + 199.146, + 198.565, + 204.514, + 217.299, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 28.45, + 11.58, + 60.314, + 60.825, + 115.615, + 119.63, + 161.444, + 158.399, + 158.925, + 160.905, + 160.103, + 134.408, + 98.117, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.493, + 77.562, + 130.423, + 197.557, + 203.204, + 221.818, + 232.741, + 235.071, + 224.913, + 217.481, + 216.388, + 220.746, + 171.488, + 170.531, + 152.061, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 67.138, + 77.398, + 131.158, + 198.648, + 212.192, + 231.565, + 234.973, + 232.187, + 226.78, + 222.678, + 222.627, + 229.639, + 175.028, + 173.267, + 154.606, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.557, + 77.307, + 131.128, + 198.91, + 213.007, + 230.283, + 242.293, + 242.117, + 234.115, + 228.21, + 220.548, + 221.588, + 171.722, + 170.467, + 151.877, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.762, + 77.176, + 130.686, + 198.575, + 211.442, + 228.851, + 227.142, + 223.328, + 222.471, + 218.449, + 214.226, + 220.959, + 171.645, + 170.803, + 152.122, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 66.962, + 77.375, + 131.077, + 198.039, + 203.216, + 208.137, + 208.382, + 208.203, + 207.835, + 207.531, + 209.955, + 219.978, + 170.186, + 169.241, + 150.879, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 66.192, + 60.096, + 95.695, + 149.324, + 198.238, + 199.4, + 199.575, + 199.224, + 199.436, + 198.422, + 204.64, + 217.67, + 150.775, + 115.348, + 115.348, + 79.921, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.519, + 60.64, + 60.753, + 114.256, + 115.979, + 152.429, + 150.657, + 149.401, + 148.853, + 154.822, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.776, + 78.444, + 131.391, + 197.623, + 198.671, + 211.872, + 227.876, + 219.066, + 210.202, + 205.282, + 205.37, + 217.83, + 169.216, + 168.544, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.534, + 60.62, + 60.819, + 115.553, + 119.794, + 168.346, + 174.477, + 170.564, + 162.056, + 158.753, + 133.08, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.91, + 78.039, + 131.42, + 197.534, + 197.506, + 197.648, + 197.559, + 197.333, + 197.048, + 196.578, + 203.021, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.064, + 77.977, + 130.603, + 196.588, + 197.026, + 197.505, + 197.731, + 197.253, + 196.75, + 197.09, + 203.054, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 71.135, + 77.828, + 130.871, + 197.166, + 197.033, + 196.589, + 196.558, + 196.268, + 196.429, + 196.397, + 203.012, + 216.707, + 168.489, + 168.489, + 150.775, + 60.908, + 33.107, + 33.107, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 69.848, + 60.18, + 95.111, + 148.371, + 196.38, + 196.494, + 196.284, + 196.956, + 199.485, + 196.874, + 203.157, + 216.707, + 150.775, + 115.348, + 115.415, + 80.182, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.478, + 60.392, + 60.204, + 112.649, + 112.928, + 148.363, + 148.299, + 148.192, + 148.179, + 154.798, + 133.062, + 97.634, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 33.107, + 70.664, + 77.744, + 131.267, + 197.486, + 197.891, + 198.097, + 197.622, + 197.438, + 197.666, + 196.851, + 203.256, + 216.707, + 168.489, + 168.489, + 150.791, + 60.908, + 33.107, + 33.107 + ], + "lifecycle_emissions_tonnes_SO2_bau": 0.37, + "cambium_emissions_region": "CAMXc", + "annual_emissions_tonnes_NOx_bau": 0.09519999999999999, + "annual_emissions_tonnes_CO2": 32.9444, + "lifecycle_emissions_tonnes_CO2": 823.61 + }, + "ElectricTariff": { + "lifecycle_demand_cost_after_tax_bau": 0.0, + "year_one_energy_cost_before_tax": 232771.01, + "lifecycle_fixed_cost_after_tax_bau": 0.0, + "year_one_min_charge_adder_before_tax": 0.0, + "lifecycle_export_benefit_after_tax_bau": -0.0, + "year_one_export_benefit_before_tax_bau": -0.0, + "lifecycle_demand_cost_after_tax": 0.0, + "lifecycle_export_benefit_after_tax": -0.0, + "year_one_demand_cost_before_tax_bau": 0.0, + "year_one_bill_before_tax_bau": 263196.09, + "lifecycle_energy_cost_after_tax_bau": 2.521988e6, + "lifecycle_min_charge_adder_after_tax_bau": 0.0, + "year_one_export_benefit_before_tax": -0.0, + "year_one_bill_before_tax": 232771.01, + "year_one_energy_cost_before_tax_bau": 263196.09, + "lifecycle_min_charge_adder_after_tax": 0.0, + "year_one_fixed_cost_before_tax": 0.0, + "lifecycle_coincident_peak_cost_after_tax": 0.0, + "year_one_demand_cost_before_tax": 0.0, + "lifecycle_fixed_cost_after_tax": 0.0, + "year_one_min_charge_adder_before_tax_bau": 0.0, + "year_one_coincident_peak_cost_before_tax_bau": 0.0, + "lifecycle_coincident_peak_cost_after_tax_bau": 0.0, + "lifecycle_energy_cost_after_tax": 2.23044995e6, + "year_one_coincident_peak_cost_before_tax": 0.0, + "year_one_fixed_cost_before_tax_bau": 0.0 + }, + "ElectricLoad": { + "load_series_kw": [ + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 32.1651558934, + 32.3881481528, + 32.7585418392, + 32.7247305327, + 13.187118239999998, + 81.151758507, + 92.248455282, + 153.443729561, + 157.963779561, + 193.83406871600002, + 190.506058716, + 183.106588716, + 171.551398716, + 157.05634656499998, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.8692608705, + 79.82287324699999, + 151.039085081, + 228.93602942799998, + 237.60373942799998, + 242.19172942799997, + 242.68439942799998, + 239.100019428, + 231.74531942799996, + 220.18502942799998, + 200.12341727700002, + 216.706946524, + 168.489065812, + 168.491911227, + 150.85171541, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.5474906692, + 79.79461025209999, + 141.36722718500002, + 229.54102411399998, + 238.40158277999998, + 243.459429428, + 244.03129942799998, + 240.75477942799998, + 233.17080942799998, + 221.338889428, + 205.78216727699999, + 216.706946524, + 168.517535318, + 168.721294419, + 151.09283434, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.6578533614, + 82.6777677224, + 151.60253116099997, + 229.264201979, + 238.112529428, + 242.646679428, + 243.10337942799998, + 239.78250942799997, + 232.35680942799996, + 220.85979942799997, + 205.688857277, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.4065050174, + 79.7758119707, + 151.40434154800002, + 229.270262643, + 237.79167311700002, + 242.19677833699998, + 242.63919742299998, + 231.63693430900003, + 220.750282684, + 220.89401858699998, + 203.088540453, + 217.360114968, + 169.264710745, + 169.393233922, + 151.75045889499998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 32.1323934869, + 32.880291975, + 32.8406835913, + 33.0638860086, + 71.1972270942, + 63.3542473172, + 115.80719452760002, + 179.372813475, + 224.45584942799996, + 224.581299428, + 231.36673942799996, + 238.07133942799996, + 231.18284942799997, + 220.26121942799998, + 205.939507277, + 216.706946524, + 150.775396235, + 115.34805707999999, + 115.36839556599999, + 80.2129371411, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 32.0314953702, + 32.061228484, + 32.1144179076, + 15.426403582, + 79.2113773219, + 90.07297082819998, + 151.815039561, + 156.560749561, + 192.771618716, + 189.934658716, + 182.898048716, + 171.780908716, + 157.86883656499998, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.586747502, + 82.5594247341, + 151.247963297, + 229.15358036799998, + 238.489599428, + 243.68198942799998, + 244.33314942799998, + 241.04647942799997, + 233.835759428, + 222.03845942799998, + 207.128467277, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.6172383343, + 79.4995193924, + 140.94779766099998, + 228.51640942799997, + 237.183269428, + 241.96628942799998, + 242.573489428, + 239.56897942799998, + 232.539419428, + 221.43295942799998, + 207.462187277, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.2988329368, + 79.86647197070002, + 150.05594307, + 227.92643942799995, + 230.785116099, + 229.992247968, + 236.747132685, + 225.34751629000002, + 223.952084999, + 212.87249816599999, + 203.04225295499998, + 216.75762088200003, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.1700965213, + 78.33514593059999, + 132.625735884, + 206.947999428, + 233.958299428, + 239.38561942799998, + 231.21488942799996, + 228.838809428, + 231.29383942799998, + 218.24718942799996, + 207.449887277, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.1449318269, + 81.71146280149999, + 149.41344020499997, + 227.56080942799997, + 236.51507942799998, + 241.46187942799997, + 242.14780942799996, + 238.959949428, + 232.08402942799995, + 221.236379428, + 208.140777277, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 69.8722327627, + 64.0991499322, + 114.12216757780001, + 179.12612871599998, + 235.71580942799997, + 241.344593234, + 245.077261312, + 246.300942938, + 242.186443021, + 227.497139228, + 208.05982809500003, + 217.960109224, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.7231487988, + 79.39233082819999, + 91.7047708282, + 153.814204269, + 154.642399957, + 186.62131664700001, + 183.470797012, + 183.57551991099996, + 172.534841767, + 159.52798352, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 13.5048587988, + 78.8007896061, + 89.47430930510001, + 141.658129561, + 147.864089561, + 170.10885871600001, + 189.769588716, + 162.73169871599998, + 149.86232871599998, + 149.232128716, + 133.061726657, + 97.6558853336, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 72.0552251792, + 82.37925082000001, + 148.878730501, + 226.84919942799996, + 236.016029428, + 241.20935942799997, + 242.20373942799998, + 239.473929428, + 232.780339428, + 221.66914942799997, + 205.54711942799997, + 216.706946524, + 168.489065812, + 168.489065812, + 150.784832476, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 72.1128977055, + 82.84117310530002, + 149.898008795, + 227.26379923, + 235.86537147800001, + 240.45149146, + 232.084659753, + 238.904744239, + 232.657448727, + 221.97313850600003, + 206.47035506499998, + 217.647917183, + 169.580816349, + 169.609419563, + 151.81423075200001, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.1484538693, + 33.1579791685, + 33.2161229216, + 72.404215929, + 81.89106904100001, + 144.968198032, + 214.93911942799997, + 227.99220942799997, + 232.14282942799997, + 231.76812942799998, + 220.294669428, + 218.53370942799998, + 206.66354942799998, + 197.51118942799997, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.3500988695, + 81.4242603793, + 133.21505361899997, + 207.84839942799996, + 215.425669428, + 214.406059428, + 241.425229428, + 238.94396942799997, + 217.65826942799998, + 213.458539428, + 197.499259428, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.9421555958, + 32.2035600905, + 32.2652049286, + 32.304003877599996, + 70.6306158834, + 64.87676612749999, + 114.03062435300001, + 179.501768716, + 236.64990942799997, + 241.90437942799997, + 215.79464942799999, + 200.180069428, + 201.95299942799997, + 196.726449428, + 196.99228942799996, + 216.706946524, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9691018546, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 32.1861644729, + 32.411915279999995, + 32.5718722321, + 32.830846147500004, + 13.754587628, + 69.7588359042, + 83.6192306699, + 145.124929561, + 147.864319561, + 184.970898716, + 176.772428716, + 170.21452871600002, + 169.223618716, + 158.922938716, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.244252711899996, + 33.107087900699995, + 71.7314978994, + 83.1691202537, + 150.1085794, + 227.62277942799997, + 236.28825942799998, + 241.57398942799998, + 242.735829428, + 239.95657942799997, + 233.50968942799997, + 223.06277942799997, + 207.18229942799996, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.2520486233, + 33.273657609000004, + 71.6231581158, + 82.7872733037, + 149.248053491, + 227.05994942799998, + 224.30588942799997, + 231.995510973, + 228.831475361, + 226.802187514, + 224.59631162699998, + 214.36362933, + 199.82497822599998, + 216.721073515, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.5362609355, + 78.915522855, + 139.14246913800002, + 207.34600942799997, + 215.213991826, + 218.39926344399998, + 219.18910861499998, + 225.540647516, + 223.11099023, + 217.433802111, + 206.050193761, + 216.413796675, + 170.606738842, + 170.494808514, + 152.783232233, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.0071306369, + 77.276646023, + 133.93780913800003, + 206.24377942799998, + 205.03769146699997, + 223.703108794, + 224.59824541900002, + 276.871649931, + 274.607642999, + 264.336763137, + 240.779303793, + 235.345027798, + 180.246863585, + 171.697026845, + 152.828674428, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.5248898027, + 81.6845756164, + 142.593269138, + 220.89192578799998, + 205.68775353300003, + 253.08898435600003, + 266.204581622, + 269.723578975, + 241.22410524, + 254.099784196, + 222.27934595999997, + 224.624227846, + 179.8832421, + 173.852535803, + 153.12654982, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 65.3926614137, + 64.9881444643, + 116.0537999831, + 183.077928716, + 241.44372942799998, + 255.20724061500002, + 274.81598691199997, + 274.975416228, + 263.23591507, + 242.967350689, + 215.448399118, + 215.368693224, + 151.00139183000002, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 17.673008798799998, + 81.18176410790001, + 94.16852082819999, + 156.805279498, + 164.133291661, + 201.64446886299996, + 199.02981642599997, + 192.153644078, + 180.21125928899997, + 162.765761205, + 129.635408808, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.5450257743, + 84.07233372830001, + 151.603715737, + 229.98281942799997, + 238.70235942799997, + 243.247109428, + 243.96460942799996, + 231.10899942799998, + 229.383629428, + 212.96359942799998, + 200.892399428, + 213.280628675, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 68.0150536493, + 80.53778989349999, + 150.96233383799998, + 228.96000942799998, + 230.760729428, + 234.667959428, + 234.876149428, + 231.311319428, + 226.234219428, + 217.501159428, + 202.94353942799998, + 213.280628675, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 68.1338724794, + 78.1798964587, + 132.53842153300002, + 212.16973378800003, + 222.33268942799998, + 245.23601942799996, + 246.463559428, + 243.96038942799998, + 237.194099428, + 226.241759428, + 207.82571942799999, + 213.280628675, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.5896753091, + 83.0463000934, + 149.68708138600002, + 227.847821735, + 236.52967942799998, + 241.405269428, + 243.00549942799998, + 240.95606942799998, + 235.22054942799997, + 224.86821942799997, + 208.82103942799998, + 213.280628675, + 168.489065812, + 168.489065812, + 150.82903128, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.7296707432, + 84.83498913039999, + 152.64156998500002, + 231.286721442, + 233.080839125, + 236.17564942799999, + 234.604379428, + 243.07203942799998, + 236.44632942799996, + 226.253879428, + 211.12674942799998, + 213.280628675, + 168.603925621, + 168.804078193, + 151.24034772800002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 32.006453887300005, + 67.6467927111, + 68.1944595417, + 117.1023633386, + 182.52555871599998, + 239.68242942799998, + 244.549899428, + 245.44226942799997, + 242.63131942799998, + 236.40314942799998, + 226.281789428, + 211.346439428, + 209.854310826, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.949074679299997, + 28.6677997673, + 18.6003929116, + 81.2893867719, + 93.0342763918, + 155.299429561, + 160.137389561, + 196.58083871600002, + 193.77073871599998, + 187.51920871599998, + 177.482368716, + 162.685608716, + 126.20909095800002, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 68.12779095740001, + 80.2620992761, + 142.42567853699998, + 217.372769428, + 229.90069942799997, + 233.89217942799996, + 231.617369428, + 226.43803942799997, + 225.46987942799998, + 214.123639428, + 202.017309428, + 209.854310826, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.7074061905, + 85.2441270473, + 151.448460253, + 228.643529428, + 237.69240942799996, + 242.87271942799995, + 244.368709428, + 234.92801942799997, + 228.62384942799997, + 220.361359428, + 205.992329428, + 209.854310826, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.92357773559999, + 82.4167213288, + 146.308654491, + 221.363259428, + 228.521559428, + 236.25549942799998, + 229.02654942799998, + 227.27037942799998, + 220.75058942799998, + 218.38013942799998, + 204.98196942799999, + 209.854310826, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.0195564568, + 81.7867835364, + 141.438701432, + 217.760704597, + 219.434899428, + 215.88586942799998, + 229.248449428, + 231.44786942799996, + 217.578059428, + 214.65946942799997, + 201.787599428, + 209.854310826, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.81245927900001, + 85.18322551339999, + 145.76062677499996, + 221.008839428, + 224.135639428, + 231.971729428, + 206.930759428, + 209.04693623400004, + 206.72525418, + 206.355254654, + 199.78652478299998, + 211.430508402, + 168.631881565, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 62.81905509520001, + 61.2624877597, + 105.23604998310002, + 153.788437728, + 217.200462163, + 247.528529284, + 245.00976819699997, + 248.05588464800002, + 242.97130553999997, + 236.803931562, + 215.81005935299996, + 218.694119197, + 153.011108362, + 116.124006159, + 115.542145234, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 11.3183987988, + 80.36962499970001, + 93.37841082819999, + 156.14596652999998, + 162.56821625700002, + 200.95179534300001, + 200.35616200200002, + 196.826629814, + 187.25696932499997, + 169.847331775, + 128.387966216, + 97.68391383459999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.4402921551, + 84.4116833563, + 151.01584913800002, + 225.353145893, + 260.224575856, + 277.410574156, + 288.867655975, + 295.160866498, + 282.912908403, + 266.265610333, + 226.729710159, + 224.907089411, + 172.00815785700001, + 170.841763735, + 152.421036138, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.3886767617, + 85.0703577293, + 152.25808913800003, + 232.06728081199998, + 229.857522727, + 277.21953144500003, + 276.286114656, + 269.88296576, + 263.584016227, + 244.95642575899998, + 232.53468593600002, + 215.65498269600002, + 171.59169243, + 170.476878971, + 151.899687987, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.5366435952, + 85.73380296379999, + 153.07314913800002, + 232.12146942799995, + 241.77749942799997, + 246.669359428, + 248.284772627, + 246.97845569400002, + 240.373997368, + 229.901889403, + 214.46608340199998, + 207.114032444, + 168.634719254, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.5575164019, + 81.1626185894, + 153.53443538700003, + 231.73240942799998, + 240.39310942799997, + 245.209889428, + 246.26693942799997, + 243.45749942799998, + 237.14703942799997, + 227.141839428, + 212.78095942799996, + 206.427992976, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.1606403238, + 86.4908288498, + 152.967567646, + 231.05687607200002, + 239.930439428, + 244.980257117, + 246.419868271, + 243.98226077799998, + 237.582760288, + 227.56581174000002, + 212.905455917, + 206.81844063999998, + 168.94659268, + 169.072930275, + 151.420703055, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 64.0594869676, + 69.3942565508, + 118.1059711435, + 183.152754178, + 240.42615942799998, + 245.295669428, + 246.26443942799997, + 243.638539428, + 237.150879428, + 221.75488942799998, + 199.67484942799996, + 206.427992976, + 150.775396235, + 115.34805707999999, + 115.35719230699999, + 80.1212197812, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 14.6882387988, + 75.2076569492, + 80.3885928609, + 140.72768956099998, + 137.094649561, + 163.171518716, + 178.463918716, + 178.584258716, + 171.374188716, + 159.047138716, + 122.78277310899999, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 11.3183987988, + 62.591066903400005, + 61.620917251799995, + 114.90788791000001, + 119.98777784800001, + 186.656184398, + 180.309956645, + 189.524268716, + 179.607148716, + 164.88631871599998, + 123.36221345799999, + 97.9005165071, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.194454134, + 33.7228417669, + 33.9055215817, + 62.0983558869, + 87.6459498613, + 153.78395711800002, + 231.52333942799996, + 240.197609428, + 245.169769428, + 246.493829428, + 244.26313942799996, + 238.49607942799997, + 228.27404942799998, + 213.88450942799997, + 207.242362976, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.4071003996, + 33.4662546745, + 61.6644347284, + 86.90495086979999, + 152.869496897, + 230.402639428, + 238.78407942799996, + 244.19103942799998, + 245.99332942799998, + 244.16747942799998, + 238.45839942799998, + 228.64937942799997, + 214.17428942799998, + 207.431212976, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 61.0692464553, + 86.8347729769, + 139.412798432, + 205.30404942799998, + 202.58419942799998, + 227.99749942799997, + 234.859959428, + 232.059719428, + 224.30294942799998, + 218.22037942799997, + 206.966599428, + 206.571482976, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 61.0984343479, + 88.000816009, + 156.278473491, + 235.486549428, + 245.010189428, + 248.338949428, + 249.613829428, + 249.357719428, + 243.15498942799996, + 232.31458942799998, + 216.43569942799996, + 206.984372976, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 59.8517699823, + 70.327085302, + 120.12863838559998, + 186.049638716, + 242.992039428, + 246.97988942799998, + 247.208189428, + 244.030239428, + 238.46450942799999, + 229.54659942799998, + 215.455039428, + 203.58315512700003, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 21.1638687988, + 84.09625960599999, + 96.7225708282, + 159.22080956099998, + 163.982639561, + 200.56164871599998, + 186.407898716, + 155.64161738599998, + 150.37223055600003, + 151.90098231599998, + 120.646965259, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 61.0298549706, + 87.6052969132, + 154.690187712, + 232.975649428, + 241.990679428, + 247.204869428, + 248.555129428, + 246.16845942799998, + 240.08791942799996, + 230.06842942799997, + 215.17755942799997, + 204.824035127, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.1785797869, + 33.3424234438, + 58.028736127200006, + 78.279393735, + 156.04157423400002, + 235.41783942799998, + 235.19183942799998, + 237.24539942799998, + 249.750959428, + 249.24291942799996, + 242.58904942799998, + 199.256069428, + 199.90617942799997, + 203.17426512699998, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.2521630321, + 58.042177290299996, + 89.2394074905, + 157.23230609300003, + 236.16980942799995, + 245.375899428, + 248.726819428, + 249.927869428, + 249.639959428, + 243.172539428, + 232.534549428, + 196.648649428, + 204.248705127, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 58.0257150158, + 80.00503823580001, + 147.16584901, + 211.579489428, + 217.73848942799998, + 228.064989428, + 201.30117942799995, + 227.902999428, + 216.22808942799998, + 202.17289942799997, + 204.97020942799998, + 203.001675127, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.9500601412, + 81.9974211548, + 146.446743534, + 217.925129428, + 224.370149428, + 232.56778942799997, + 227.56961942799998, + 225.911099428, + 217.218459428, + 210.58561942799997, + 202.519429428, + 203.001675127, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 56.1084519094, + 65.8739707272, + 111.11838645670001, + 174.902008716, + 234.88961942799997, + 237.291524009, + 239.002000044, + 258.96709615000003, + 252.74224895999998, + 232.01219021400001, + 215.43402158300003, + 206.29326045000002, + 151.285513646, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 18.549994497799997, + 22.0016387988, + 84.6490736895, + 86.4860908282, + 150.435675399, + 162.42258789000002, + 212.658438476, + 201.81653651300002, + 197.63704522, + 200.99674064100003, + 178.37681601100002, + 122.16730727800001, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 57.001491930300006, + 88.5084083999, + 155.846528587, + 232.86794681900003, + 240.72061945, + 229.485399428, + 246.695659428, + 244.559639428, + 231.083249428, + 228.73672942799996, + 205.33188942799998, + 205.461917194, + 168.77940147799998, + 168.94912337600002, + 151.31211313999998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 57.980951193799996, + 84.8457472648, + 147.221242539, + 218.629001152, + 241.01615942799998, + 245.60335942799998, + 236.79227942799997, + 245.05292942799997, + 238.86301942799997, + 228.705949428, + 214.874979428, + 205.57117512699998, + 168.489065812, + 168.51333617699999, + 150.902469304, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 54.64026585330001, + 89.5268164732, + 157.42452108799998, + 235.48992110799998, + 235.47182942799998, + 238.61090942799999, + 234.976159428, + 235.00010942799997, + 233.496579428, + 223.07695942799998, + 216.28564942799997, + 203.558505127, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 54.6522651167, + 89.996609359, + 158.19072913800002, + 236.91099942799997, + 245.270239428, + 248.870009428, + 249.748199428, + 247.31971942799998, + 241.05410942799998, + 230.970649428, + 212.193919428, + 201.718477277, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.7969248226, + 87.1419456858, + 157.15159927999997, + 235.14390942799997, + 243.11769942799998, + 246.88391942799998, + 246.48458942799996, + 242.88057942799998, + 237.73339942799998, + 221.574679428, + 211.211469428, + 202.653707277, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 53.5120818321, + 72.1357822177, + 116.13906359960001, + 186.830724791, + 243.27457942799998, + 247.760899428, + 248.50555942799997, + 246.061589428, + 239.62857942799997, + 229.747049428, + 215.76237942799997, + 203.022937277, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.871006648300002, + 68.67744104580001, + 79.2660339376, + 153.128079561, + 152.781699561, + 188.086408716, + 192.490818716, + 185.398918716, + 181.54126871600002, + 170.108008716, + 126.941929561, + 82.8349182551, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.5802090928, + 82.39150418280002, + 143.350764585, + 224.13923718099997, + 236.63988942799998, + 245.060589428, + 249.10148942799998, + 250.021199428, + 247.16810942799998, + 240.656269428, + 230.58179942799998, + 216.29783942799997, + 155.24320656499998, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.1137200688, + 82.8802911812, + 143.627160406, + 223.996831309, + 236.05573942799998, + 244.292709428, + 248.87162942799998, + 249.982829428, + 247.27223942799998, + 240.754279428, + 230.82607942799999, + 216.67142942799998, + 155.63881656499998, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.0562858942, + 83.0717459457, + 143.949229154, + 224.304881176, + 235.818949428, + 243.08051942799997, + 247.22165942799998, + 248.05650942799997, + 245.81473942799997, + 240.02306942799996, + 230.38495942799997, + 216.53637942799998, + 155.72582656499998, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.76560936519999, + 80.2912219564, + 144.43459250299998, + 224.84923269700002, + 236.86214942799998, + 245.18427942799997, + 249.272939428, + 249.97569942799998, + 247.24107942799998, + 240.45920942799998, + 230.39088942799998, + 216.47952942799998, + 155.63011656499998, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.74980254120001, + 80.31586904580001, + 143.99779658100002, + 223.514970005, + 234.16304942799997, + 241.62573942799997, + 245.084499428, + 246.92168942799998, + 245.123759428, + 239.621479428, + 230.40541942799996, + 216.91004942799998, + 156.05446656499998, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 69.9624117576, + 62.5211928384, + 109.4309073523, + 177.422058716, + 237.790659428, + 246.13676942799998, + 249.82544942799998, + 250.813859428, + 248.863369428, + 242.527369428, + 228.38130942799998, + 211.30550942799997, + 137.106406988, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 13.631298798800001, + 74.78951052859999, + 89.8468455384, + 155.150939561, + 163.21331956100002, + 201.782978716, + 202.516118716, + 199.77512871599998, + 193.528598716, + 183.526438716, + 134.279839561, + 85.76476825510001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.43221119629999, + 80.534782419, + 145.55771406, + 226.443439253, + 238.483339428, + 246.501139428, + 249.92033942799998, + 250.633859428, + 247.258959428, + 240.52271942799996, + 230.80742942799998, + 217.373389428, + 156.505336565, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.7159433771, + 79.88475229329998, + 140.444884554, + 214.873072607, + 233.504019428, + 238.90510942799997, + 237.99142942799998, + 238.264939428, + 236.737549428, + 226.907299428, + 230.10521942799997, + 216.77062942799998, + 152.796578716, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.3879845974, + 80.65360106380001, + 145.132872913, + 224.83137593299998, + 236.24298595800002, + 243.959789543, + 248.431849101, + 249.059836979, + 246.29821942799995, + 240.02015942799997, + 230.37158053499996, + 216.75462514199998, + 152.88780665299998, + 169.242880395, + 151.67589048099998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.2322218632, + 33.60771122, + 33.800378684900004, + 34.1789560652, + 34.3747106047, + 69.00169124979999, + 81.99469163559999, + 145.694039917, + 224.550831632, + 234.805219428, + 241.073669428, + 244.763779428, + 246.64778942799995, + 245.253429428, + 239.867489428, + 230.216499428, + 216.574739428, + 152.769188716, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 68.21642204620001, + 81.1389499349, + 145.410741746, + 218.353446071, + 226.37597942799997, + 240.79992942799998, + 238.98285942799998, + 238.63711942799998, + 234.91378942799997, + 232.784019428, + 228.94470942799998, + 210.25080942799997, + 151.093218716, + 168.489065812, + 150.808750933, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 66.8440449977, + 63.3308198436, + 109.7583088657, + 169.78048333900003, + 230.785159428, + 243.409659428, + 247.166079428, + 247.43301942799997, + 244.25738942799998, + 226.53393942799997, + 224.98619942799996, + 211.00977942799997, + 134.68789913800003, + 115.34805707999999, + 115.34805707999999, + 79.9553430496, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 14.143928798800001, + 74.9441756663, + 87.6089555353, + 151.590419561, + 160.271219561, + 200.277028716, + 201.244638716, + 192.261129945, + 192.039327609, + 182.393874509, + 132.726789561, + 81.8796604056, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.6264595813, + 80.9469880292, + 145.91811715300003, + 226.544529428, + 238.676983546, + 251.08992934100002, + 257.75363437, + 216.23348238, + 235.748508696, + 236.368900634, + 224.62777747, + 207.19918728100004, + 154.28626546499999, + 168.632610177, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.5429693398, + 81.0489714861, + 146.364710796, + 226.59867621200002, + 237.93984942799997, + 245.151749428, + 249.03806942799997, + 250.409449428, + 247.66238942799998, + 241.35525942799998, + 231.130879428, + 204.63270942799997, + 153.281008716, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.5439011054, + 81.19218284860001, + 145.92811697, + 225.312829428, + 235.74499942799997, + 244.54163106, + 253.57652506599996, + 256.998030589, + 253.466569394, + 250.307804221, + 237.10312573, + 218.689842455, + 154.16842411599998, + 168.583890605, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.4918707848, + 81.02924655150001, + 140.40666724099998, + 217.66102942799998, + 235.302024256, + 250.356664243, + 260.412406798, + 252.00652439199996, + 255.86542950600003, + 257.57594634599997, + 244.302290299, + 222.15126164499998, + 154.93885130200002, + 170.01510849299999, + 151.615747781, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.477519776099996, + 80.9145461287, + 147.555861781, + 228.82634942799996, + 241.096630038, + 260.614335821, + 279.16082357700003, + 287.826100331, + 284.00922907399996, + 270.515885651, + 253.513644919, + 233.918537953, + 159.126566426, + 169.595140774, + 151.139541776, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 62.392231850600005, + 63.182662440099996, + 111.1549164335, + 178.86599786, + 249.923024742, + 273.98893460700003, + 284.238509064, + 284.158388063, + 284.063729067, + 281.771377045, + 268.10783587599997, + 221.49038083800002, + 136.45942186799996, + 116.044688571, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 15.1452087988, + 77.7086408, + 92.8090898248, + 157.60776956100003, + 165.702339561, + 203.66982871599998, + 204.456218716, + 202.799628716, + 195.738308716, + 185.319838716, + 135.305749561, + 83.51086040560001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.4407085945, + 81.871298274, + 148.27741590999997, + 228.457548597, + 239.580599428, + 246.861649428, + 250.43224942799998, + 250.36052942799998, + 238.577619428, + 241.18252942799998, + 231.42957942799998, + 217.99456942799998, + 154.315118716, + 165.062747963, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.43753969810001, + 81.9872973375, + 147.292101857, + 221.60717879100002, + 228.823609428, + 241.43119942799999, + 245.73048942799997, + 247.33904942799998, + 245.406619428, + 239.94854942799998, + 230.33758942799997, + 217.25788942799997, + 153.970188716, + 165.062747963, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.3562861956, + 82.2327160203, + 147.80691131, + 217.72270942799997, + 231.38435942799998, + 245.14066942799997, + 249.621059428, + 250.69608942799996, + 248.107169428, + 241.815459428, + 232.02507942799997, + 218.13131942799998, + 154.312508716, + 165.062747963, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.3032653825, + 82.3991644458, + 148.845515157, + 229.346572344, + 240.90316942799998, + 248.39872942799997, + 251.68682942799998, + 252.604919428, + 250.486009428, + 243.61318942799997, + 218.04003942799997, + 218.10284942799998, + 154.302588716, + 165.062747963, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.6103889724, + 82.5015645176, + 149.078074339, + 229.60014942799998, + 241.05125942799998, + 249.081589428, + 251.829629428, + 252.531869428, + 249.74654942799998, + 242.94308942799998, + 232.50921942799997, + 218.20993942799998, + 154.512668716, + 165.062747963, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 59.1811872471, + 64.625653984, + 113.53913771340001, + 181.026528716, + 240.08097942799998, + 246.99327942799997, + 250.24188942799998, + 250.02873942799997, + 246.91414942799997, + 241.006118911, + 232.032122408, + 218.54835970599999, + 137.19492904600003, + 111.993546315, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 15.227888798799999, + 77.25841308209999, + 90.6218608282, + 156.52121751399997, + 176.134968332, + 223.95833933100002, + 223.117649116, + 220.157772618, + 214.05023976200002, + 202.651482937, + 142.973074411, + 85.0009487808, + 28.4499880461, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.012407788800004, + 82.0939927326, + 148.18850697499997, + 227.70151942799998, + 239.288077421, + 250.57088633, + 254.735318938, + 255.589043628, + 252.99883681699998, + 246.304659448, + 235.825235372, + 220.14958850099998, + 155.79986062900002, + 165.73295948799998, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.308516406, + 82.19827423989999, + 148.98296448099998, + 228.92246942799997, + 239.530259428, + 248.605908976, + 257.24138475099994, + 255.778577224, + 252.73571673100002, + 246.178919767, + 235.974109584, + 221.990823456, + 157.094293242, + 165.94027216900002, + 150.895940876, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.1719545604, + 77.49707563470001, + 148.821245398, + 216.15367942799998, + 240.27224942799998, + 205.89491942799998, + 224.99708942799998, + 254.91293345699998, + 270.25958563399996, + 265.781811182, + 268.69971213400004, + 257.47850198599997, + 195.78843733500003, + 198.018011367, + 171.932761304, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.6326017304, + 82.4102079016, + 149.133899138, + 219.374135715, + 259.065627319, + 277.270925685, + 288.512637788, + 285.366961877, + 288.356529171, + 259.09280485200003, + 244.340633355, + 236.98229650400003, + 170.652035353, + 174.865144519, + 152.22057897000002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.9689370248, + 77.3046024499, + 148.81294913800002, + 229.72853657500002, + 221.115816104, + 226.735914213, + 241.846956752, + 240.56869875700002, + 241.07255317000002, + 235.231093607, + 237.062341124, + 222.283754256, + 160.436578452, + 167.277039323, + 151.573968991, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 55.532393595900004, + 64.3425693677, + 114.9314041716, + 182.941008716, + 242.197029428, + 249.49334041900002, + 253.06922359600003, + 253.70665119500003, + 250.557965217, + 243.75172859600002, + 233.808807159, + 219.84868778400002, + 138.294368951, + 111.972841031, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 18.2799044978, + 16.6157587988, + 78.7597656058, + 92.07931528200001, + 154.83496956099998, + 160.442839561, + 198.48591871600001, + 199.713520529, + 198.128968925, + 192.56541616700002, + 183.46298169, + 134.477792386, + 84.28829040560001, + 28.4499880461, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.8943350041, + 82.56898047170002, + 149.07030765099998, + 228.341489428, + 238.06853942799998, + 246.394493072, + 256.08738273299997, + 257.98204976600005, + 255.98967464400002, + 251.964732593, + 243.24679662100002, + 230.640312184, + 163.840180262, + 163.13113847999998, + 151.564485868, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.895779064699994, + 82.4187820215, + 149.03207712799997, + 227.84770942799997, + 236.834959428, + 242.527479428, + 245.80689942799998, + 247.228789428, + 245.514839428, + 239.83893942799997, + 230.663309428, + 217.880259428, + 155.245378716, + 161.63643011300002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 57.193419216900004, + 82.5468656264, + 149.150550346, + 228.12952942799998, + 231.12895942799997, + 236.672746224, + 247.738024547, + 247.97565903499998, + 245.506759775, + 239.58520899099997, + 230.460960828, + 212.763452928, + 155.18740057000002, + 161.638727569, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 57.1698047047, + 82.7123238136, + 149.38544211299998, + 228.55744942799998, + 237.86875942799998, + 243.809736812, + 247.96174837900003, + 248.988059393, + 245.40021551200002, + 239.852812702, + 231.482164219, + 219.14732540200004, + 156.12937729, + 162.36046872499998, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.8746537333, + 82.84970444759999, + 148.530300963, + 227.26139942799998, + 236.89713942799997, + 244.204229428, + 246.91921942799996, + 246.047019428, + 242.168669428, + 235.76285942799998, + 228.13601942799997, + 216.74233942799998, + 155.092518716, + 161.63643011300002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 56.0247416906, + 65.2334866996, + 114.0898186309, + 179.58671366200002, + 236.77317942799996, + 242.52001942799998, + 245.11258942799998, + 245.25065942799998, + 242.87391942799997, + 237.63444942799998, + 229.14403942799999, + 217.22612942799998, + 137.58108913800004, + 108.495421381, + 115.392130624, + 80.1688104385, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.0190266483, + 16.6984587988, + 79.34105784229999, + 90.9274450543, + 153.163901069, + 160.50316801, + 199.27278834700002, + 199.821917123, + 197.237936357, + 191.115098716, + 181.649808716, + 134.055519561, + 84.6451365757, + 25.0236701967, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 55.214467464200006, + 84.5646780826, + 150.889083229, + 229.83606793899997, + 239.168723265, + 245.849989922, + 249.47624409499997, + 249.34805594199997, + 247.17919942799998, + 240.94981942799998, + 231.61770942799998, + 218.81979942799995, + 156.077091449, + 161.993373463, + 151.23928744699998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 55.3832138979, + 83.3214001006, + 150.64764744599998, + 227.951258324, + 238.51418942799998, + 238.01666942799997, + 221.54275942799995, + 226.323689428, + 228.70579942799998, + 207.781049428, + 206.853929428, + 202.97652942799996, + 149.688048716, + 161.63643011300002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.9600285541, + 83.1683246683, + 145.688792424, + 216.81711942799998, + 220.99963942799997, + 208.411789428, + 228.020689428, + 237.49355942799997, + 233.27982942799997, + 218.02239942799997, + 221.27764942799996, + 211.620709428, + 155.79826871600002, + 161.63643011300002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 54.033320430299995, + 83.5038280893, + 150.530390609, + 229.576756545, + 239.617039428, + 246.56247942799996, + 250.361629428, + 250.84612942799998, + 221.68032942799996, + 229.109339428, + 209.883809428, + 204.07293942799998, + 149.257958716, + 161.63643011300002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 54.193731748, + 83.92582535239998, + 151.165737726, + 230.237109428, + 239.92581942799998, + 246.58658942799997, + 249.72547942799997, + 249.181049428, + 245.873119428, + 239.39239942799998, + 230.42611942799996, + 217.648289428, + 155.79815871600002, + 161.63643011300002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 52.83817409070001, + 66.3773447168, + 115.24050882629999, + 181.343705912, + 239.35351942799997, + 246.31200942799998, + 248.85802942799998, + 247.72640942799995, + 243.93245942799996, + 237.46670942799997, + 229.007339428, + 217.435920059, + 138.45739623600002, + 108.91066667199999, + 115.77113264900001, + 80.47840571260001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.485966648300002, + 17.9675987988, + 80.693277599, + 92.8861223978, + 154.882916544, + 160.642534854, + 198.208858716, + 197.25665871599998, + 194.491158716, + 189.035668716, + 180.718798716, + 133.062679561, + 84.55450040560001, + 21.5973523472, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 54.38703122850001, + 84.4325531253, + 150.504016623, + 227.881664546, + 236.801525945, + 243.62584054900003, + 247.25970078499998, + 247.72744942799997, + 245.263329428, + 239.05568942799997, + 229.652169428, + 218.32006942799998, + 156.200712767, + 158.33658941899998, + 150.978757199, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 51.286952625199994, + 84.21860700730001, + 151.082888641, + 229.65766518, + 238.86308942799997, + 244.96928942799997, + 247.22560346199998, + 248.243791801, + 247.97800699900003, + 248.987922639, + 242.619279787, + 229.927102689, + 161.66842733, + 158.601014037, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.9111780358, + 83.9685014326, + 150.37999333399998, + 228.73693942799997, + 237.54177942799998, + 243.36666942799997, + 245.577709428, + 244.55885942799998, + 244.07546121000001, + 242.37407030000003, + 233.819980385, + 221.3126759, + 156.328864414, + 158.244194051, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.70563842749999, + 83.73663492719999, + 149.895545117, + 228.12896942799998, + 236.91792942799998, + 242.94207942799997, + 245.33705942799998, + 244.97661942799996, + 241.637779428, + 236.483509428, + 228.11059942799997, + 216.454589428, + 155.676708716, + 158.210112264, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.720432230700006, + 83.92756348759998, + 149.485038958, + 226.58125942799998, + 234.93327942799996, + 241.54949942799996, + 245.08574942799999, + 245.797429428, + 243.37032942799996, + 237.917199428, + 229.09534942799996, + 217.04313942799996, + 155.911958716, + 158.32811226400003, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 49.6489191292, + 66.5767684835, + 115.1725080478, + 179.26081871600002, + 233.068999428, + 240.36564942799998, + 241.079319428, + 248.914729428, + 246.03112942799999, + 231.55072942799998, + 226.60359942799997, + 215.250099428, + 137.699699138, + 105.28864353099999, + 115.34805707999999, + 79.9415925372, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 12.6229387988, + 18.9734187988, + 77.8120178607, + 89.90397647089999, + 154.98941956099998, + 161.217229561, + 200.48966871599998, + 167.131678716, + 171.097928716, + 193.051798716, + 183.64663871599998, + 128.095159561, + 85.8296904056, + 21.7243623472, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 51.9819339479, + 85.8689844836, + 151.884334377, + 213.95134157700002, + 240.32683942799997, + 247.20157942799997, + 250.88147942799998, + 245.00076942799998, + 220.47282942799998, + 201.447499428, + 225.98202942799998, + 212.163969428, + 157.008998716, + 158.60622226400002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 51.3553022095, + 84.8613099748, + 152.00492079499998, + 230.823159428, + 227.86054942799998, + 246.60361942799997, + 249.44561942799996, + 249.140119428, + 231.184339428, + 231.35465942799996, + 229.86210942799997, + 217.382889428, + 156.120398716, + 158.369152264, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 51.3785006977, + 84.8168968403, + 150.23952731800003, + 227.915409428, + 236.88504942799997, + 243.28486942799998, + 247.00094942799998, + 247.49624649900002, + 245.59103723899997, + 241.34372945900003, + 232.147716673, + 219.528456315, + 158.54789535, + 158.38799226400002, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 51.7383614866, + 85.58977825669999, + 150.893864684, + 228.851689428, + 238.229419428, + 245.19514942799998, + 253.014935314, + 259.425135013, + 257.623906251, + 252.017860404, + 242.706834469, + 229.506140294, + 162.784496598, + 159.45415752699998, + 150.791728013, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 51.3603945988, + 85.087841344, + 150.967459996, + 229.10864942799998, + 238.45899942799997, + 246.792641042, + 260.653868079, + 265.723752306, + 263.222474652, + 259.020540605, + 249.70897854300003, + 236.27890085699997, + 171.013820476, + 161.85811682, + 151.38688413900002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 49.7350698924, + 67.2095292564, + 116.0059778982, + 181.728988716, + 239.207459428, + 246.42265942799997, + 249.989443196, + 261.935373041, + 268.803021338, + 264.43520248, + 255.12019477399997, + 241.721754924, + 153.82558281099998, + 104.52097948299999, + 115.584317649, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 12.551588798800001, + 19.2269687988, + 82.62531907729999, + 95.81293168570001, + 158.234009561, + 164.214369561, + 202.721018716, + 202.478418716, + 199.119171639, + 193.41828128699999, + 184.309467863, + 135.991802394, + 86.61701040560001, + 18.9456644978, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.3264179058, + 85.34562734289999, + 152.329076286, + 230.938309428, + 240.18135942799998, + 246.57391942799998, + 249.99392942799997, + 251.89603599499998, + 252.92846674799998, + 247.42595661399997, + 238.366259617, + 225.671842219, + 164.420576222, + 156.291785927, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.5851861325, + 85.71609799390001, + 152.059140338, + 230.849909428, + 240.61871942799996, + 247.321879428, + 250.760909428, + 244.82294431900002, + 209.35486912000002, + 233.49251359599998, + 235.377717366, + 220.613144344, + 157.466413783, + 155.476114809, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.3634975468, + 85.2555748883, + 151.49869913800003, + 229.89148942799997, + 239.13252942799997, + 245.50172942799998, + 249.044589428, + 249.50559661999998, + 248.900460062, + 243.584534967, + 227.282967975, + 217.106808135, + 156.38711254000003, + 155.30223583, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.314760714900004, + 85.24631853359999, + 151.46851315900003, + 230.30860942799995, + 240.179689428, + 247.13971942799998, + 250.81204942799997, + 251.29268942799996, + 248.02825942799998, + 243.581185062, + 234.727267129, + 221.708859175, + 157.76520456400002, + 155.778694414, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.10426650189999, + 85.04575109559998, + 151.984898147, + 230.33436942799997, + 238.89147942799997, + 244.08066942799996, + 246.52412942799998, + 246.350729428, + 244.061769428, + 238.512799042, + 230.11845013900003, + 218.273864729, + 157.345298716, + 155.94016441399998, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 50.168172168800005, + 67.5621999894, + 116.8967132402, + 182.197426134, + 239.34731496400002, + 245.085961202, + 247.57622942799998, + 247.03709942799998, + 243.62619942799998, + 237.28892942799996, + 229.30115942799998, + 218.19413942799997, + 139.663389138, + 102.77306568200001, + 115.355332177, + 80.138469693, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 12.6168387988, + 18.8145287988, + 81.26824500400001, + 92.7641441966, + 154.39419058000001, + 159.74135956100002, + 197.283218716, + 196.260518716, + 192.677228716, + 188.334968716, + 181.198508716, + 134.271479561, + 86.3370404056, + 19.2480344978, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.73659306999999, + 85.09247036309999, + 150.792560261, + 227.842739428, + 236.72138942799998, + 243.13469942799998, + 246.68063942799995, + 247.287899428, + 244.76813942799998, + 239.05865942799997, + 230.396919428, + 218.35528942799996, + 157.297798716, + 155.987094414, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.4342724193, + 84.99568259050001, + 151.205520935, + 228.35131942799998, + 236.49957942799998, + 242.13891666299997, + 247.505963367, + 253.11963726800002, + 253.486369444, + 248.930336094, + 241.14763384, + 229.229933562, + 167.88159073699998, + 158.166777689, + 150.810815219, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.1063584972, + 84.6251929628, + 150.31777913800002, + 227.670599428, + 236.27315942799999, + 244.316513797, + 255.82519675799998, + 260.585966677, + 258.258651047, + 252.84911879700005, + 244.329654017, + 232.30401398200001, + 169.24599829, + 157.953283835, + 150.931600333, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.9250044176, + 84.78435273209999, + 146.90896285, + 229.488169428, + 238.75706942799997, + 235.132149428, + 248.51457942799996, + 248.57191942799997, + 245.812899428, + 243.109343089, + 237.05551296699997, + 224.79582627399998, + 160.87063543800002, + 156.42800753300003, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.322902290900004, + 85.2247853116, + 152.005012637, + 230.465839428, + 239.836689428, + 246.36419942799998, + 249.77324942799999, + 250.05750942799997, + 247.41593942799997, + 241.427449428, + 232.32396942799997, + 219.84046942799998, + 158.234618716, + 156.534154414, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 50.7368776258, + 68.2126644974, + 116.7913163564, + 182.195418716, + 239.82835942799997, + 246.631869428, + 249.86323942799999, + 250.11448942799998, + 247.15286942799997, + 241.081779428, + 232.11022942799997, + 219.560209428, + 140.422509138, + 99.84662783259999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 13.1689587988, + 19.505928798800003, + 80.90470275140001, + 92.2083552715, + 153.766539561, + 160.001009561, + 198.71006412799997, + 216.020419622, + 211.703477984, + 198.266171809, + 189.981276198, + 136.628501973, + 87.15307426679999, + 16.5335166483, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 12.8471887988, + 19.0737187988, + 80.1571320129, + 91.8204317235, + 171.044559237, + 180.083710793, + 214.10140183899998, + 215.337881353, + 214.93586040199997, + 210.01558254600002, + 201.633762271, + 151.45336695799998, + 96.6015416743, + 16.3873966483, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 50.994599547199996, + 84.92648040560002, + 150.54976913800002, + 228.484720458, + 250.315452636, + 279.612662497, + 300.540939723, + 309.416831334, + 297.520508286, + 295.291239114, + 279.128060381, + 259.521947569, + 192.584620922, + 180.52399473000003, + 168.73154143, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.284314034400005, + 84.54119040560002, + 151.392185961, + 257.26236188499996, + 274.46780305000004, + 286.58546152900004, + 292.821741354, + 294.83837470899994, + 293.057162398, + 286.65736393699996, + 276.155171133, + 260.056120541, + 191.77082921800002, + 178.75186625799998, + 166.82110053099998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.2603340344, + 84.44906040560001, + 146.25207913800003, + 213.855769428, + 234.533786553, + 250.167692345, + 251.789472184, + 247.689467819, + 232.704065165, + 253.81654187499998, + 237.34456570499998, + 244.40840928599997, + 177.53547945399998, + 162.369625581, + 151.862205698, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.3107813978, + 84.6430098394, + 150.06357913800002, + 228.25339942799997, + 236.36730942799997, + 242.08180942799996, + 245.96464942799997, + 242.238559428, + 230.65026942799997, + 232.469402943, + 226.95711880200002, + 213.63667401899997, + 155.692779671, + 152.720966565, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 50.505972087100005, + 66.85784952040001, + 111.1152415667, + 163.122408716, + 228.09496942799996, + 233.922249428, + 239.49399942799997, + 239.24323942799998, + 236.95336942799997, + 216.69271942799998, + 214.467649428, + 209.33763942799996, + 135.65319913800002, + 99.89477783259998, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 13.037758798799999, + 19.0782287988, + 79.5651489945, + 90.57901441450001, + 152.334829561, + 157.835569561, + 195.010998716, + 193.81232871600002, + 191.025708716, + 186.645488716, + 179.533698716, + 133.222129561, + 86.75341040560001, + 16.924256648300002, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.3268850392, + 84.7349293869, + 150.13433100400002, + 227.241109428, + 235.75164942799995, + 241.90315942799998, + 245.33372942799997, + 246.043599428, + 243.751089428, + 238.33008942799998, + 229.98526942799998, + 218.73078942799998, + 158.226718716, + 153.890896565, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.192820823, + 82.01971703680002, + 142.28364159699998, + 205.51043942799998, + 207.626519428, + 235.01978942799997, + 230.043319428, + 246.782849428, + 244.94341942799997, + 230.34752942799997, + 230.95344942799997, + 218.85157942799998, + 158.270068716, + 153.13109656499998, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.7869636396, + 85.21617398160001, + 151.263929733, + 229.39921942799998, + 238.74177942799997, + 245.266579428, + 248.87673942799998, + 249.386983041, + 246.997307833, + 241.742700913, + 232.91418580699997, + 220.716252987, + 158.88878889, + 154.056536565, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.3129415735, + 85.4275186922, + 152.731627983, + 231.50940942799997, + 241.38975942799996, + 248.11596942799997, + 252.56341731600003, + 256.886079953, + 256.73690862899997, + 252.14068987800002, + 242.95008794799998, + 230.47414875700002, + 168.031758145, + 155.658685133, + 150.817551839, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.239189130899994, + 85.51939915759999, + 153.24930903799998, + 232.183573499, + 241.81878942799997, + 248.303619428, + 250.95572942799998, + 248.36479942799997, + 247.916629428, + 241.87163942799998, + 232.93446942799997, + 220.72907942799998, + 159.33926871600002, + 154.585486565, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 49.8832650121, + 67.3768809365, + 116.3566855645, + 181.819318716, + 238.53248942799996, + 244.07188942799996, + 246.74879942799998, + 246.320629428, + 244.792259566, + 239.918135699, + 232.123084831, + 221.610350009, + 140.924289138, + 101.22005783259999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 12.847648798800002, + 18.904488798800003, + 80.5411693085, + 92.1847617411, + 153.804369561, + 159.20362956099999, + 197.01904871600001, + 196.79258871599998, + 194.511238716, + 189.78765871599998, + 182.070238716, + 135.646059561, + 87.9122904056, + 17.7120366483, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.0935190678, + 84.59672483029999, + 150.45200698399998, + 228.16540942799998, + 237.14551942799997, + 243.65010942799998, + 247.272105801, + 248.00860707500001, + 247.27979656700003, + 243.14354168300002, + 234.576760938, + 222.923447001, + 159.424096048, + 154.509329169, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.038741396, + 85.0919053452, + 151.153809138, + 230.02718942799999, + 237.827559428, + 244.179239428, + 249.343676268, + 249.79757852400002, + 248.54834537300002, + 246.00788609699998, + 237.797258508, + 225.78004080099998, + 161.548127287, + 154.646982167, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.22468810589999, + 84.8175505661, + 151.52355913800002, + 229.68683942799998, + 238.786019428, + 245.235019428, + 248.807748156, + 252.254772283, + 251.050253445, + 247.36601893300002, + 240.76015944999997, + 228.719512435, + 164.308238738, + 151.73502709899998, + 150.85270266700002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.1412789993, + 84.81849796370001, + 151.166789138, + 228.867269428, + 236.893519428, + 241.81918942799996, + 243.49483942799998, + 243.32366014800002, + 242.01094195199997, + 237.93723894299998, + 230.310221207, + 219.37089139799997, + 158.80072871599998, + 150.90495871599998, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.197482889199996, + 84.5731988873, + 150.36792913800002, + 227.41162942799997, + 236.16453942799998, + 242.42383942799995, + 246.472876009, + 250.46376483, + 250.824523153, + 248.02679070899998, + 239.683533708, + 228.56798494100002, + 167.338040882, + 155.287074506, + 151.034739169, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 49.680412423199996, + 66.6375713891, + 115.1840599831, + 180.440808716, + 237.82918167399998, + 250.188816973, + 262.356437493, + 270.81970280400003, + 269.989894761, + 264.208346594, + 255.57053490599998, + 243.12368244699996, + 156.520055754, + 101.1102057223, + 115.63158102499999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 13.0586087988, + 18.829438798800002, + 79.87778082819999, + 91.7208308282, + 153.38697956099998, + 158.80642956100002, + 198.36248284700002, + 201.98276343700002, + 203.36052989600003, + 201.854743199, + 193.894452379, + 137.838957652, + 88.20620874379999, + 14.3978787988, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.1982548603, + 84.54187937619999, + 150.69920913800004, + 228.45991942799998, + 236.68973942799997, + 241.63757942799998, + 246.028518184, + 248.23225882499997, + 246.42222789, + 241.90199614, + 234.02211880599998, + 222.989661683, + 159.563813992, + 151.431093908, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.6532804576, + 84.8968763048, + 150.16137913800003, + 227.379739428, + 236.34076035299998, + 246.00248493099997, + 250.542575904, + 258.760029098, + 259.89206374500003, + 254.383033817, + 246.191638775, + 234.72703962399999, + 173.20763270100002, + 156.58510492899998, + 151.363440978, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.229886543, + 84.53580156200002, + 150.02436913800003, + 227.47835942799998, + 235.76978942799997, + 241.98361165000003, + 250.957626618, + 256.83792846999995, + 256.61639562799996, + 251.402803121, + 243.05662208, + 231.583909067, + 170.76826737500002, + 154.82560881400002, + 151.080756455, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.16254367770001, + 84.35288869950001, + 150.31046913800003, + 227.91673942799997, + 236.64821942799998, + 246.17700520700004, + 258.462866469, + 259.844836376, + 260.290357487, + 256.676310845, + 248.08275134500002, + 235.94770841099998, + 172.02117235, + 153.890317549, + 151.183617123, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 50.7188740344, + 83.97938040560001, + 150.000589138, + 227.483029428, + 235.95243260799998, + 245.867442831, + 258.528775085, + 267.160202062, + 269.180432531, + 265.836599875, + 256.585242769, + 244.57292488699997, + 179.474430533, + 161.735248754, + 151.965881156, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 49.4301520293, + 66.2139008282, + 114.39815998310002, + 178.96817871599998, + 236.445617879, + 264.414706984, + 276.26427393, + 275.342793528, + 274.639471783, + 271.503996023, + 263.845061673, + 251.531476951, + 159.979163595, + 101.1970957412, + 115.770391238, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 12.8722487988, + 18.0369587988, + 76.7395108282, + 87.4238808282, + 151.721319561, + 157.67455956100002, + 195.837088716, + 196.970464382, + 192.778745514, + 191.38780682200002, + 184.14004794700003, + 134.121450001, + 87.72246952789999, + 14.2346387988, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 50.9615878153, + 84.0062218258, + 148.158159138, + 224.96878942799998, + 233.475309428, + 242.76067587499995, + 251.86981812599998, + 258.3336711, + 264.758246916, + 263.96253094400004, + 255.060615257, + 242.390298814, + 173.67154505599999, + 154.32071852899998, + 151.327943899, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 50.9452524508, + 83.78242665049999, + 148.83401913800003, + 225.32866942799996, + 233.59791942799998, + 239.903323764, + 253.60909575199997, + 260.636303255, + 258.363539414, + 238.78659178700002, + 228.46930013699998, + 234.181650619, + 170.68425926999998, + 152.17494640400002, + 151.00708229, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 50.9203231366, + 83.8559575219, + 148.99669913800003, + 226.33719942799996, + 234.729749428, + 242.20355993, + 251.42890706900002, + 259.019632651, + 260.37471013799995, + 255.28297311900002, + 246.84015644700003, + 235.06804806500003, + 170.476935237, + 153.01327689299998, + 151.256145403, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 51.13007211909999, + 84.14773330290001, + 150.24382913800002, + 239.663161727, + 264.924661448, + 281.249465074, + 291.550264607, + 298.683142666, + 297.867616257, + 290.37895820800003, + 278.064961456, + 262.435795183, + 193.292218702, + 177.157011821, + 168.608823255, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 26.2544522017, + 50.9479840344, + 84.23040040560001, + 150.80891926100003, + 240.48091778, + 258.182128207, + 269.671409203, + 278.17609128299995, + 284.89719936200004, + 290.15054272200007, + 289.613595248, + 279.716899259, + 262.947237772, + 194.464244761, + 174.872158963, + 165.668991833, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 49.4597975705, + 65.9841208282, + 114.4417248046, + 190.161646816, + 262.192895169, + 280.34071803, + 290.336274328, + 296.039042589, + 295.671282488, + 292.00512390899996, + 283.37453958200007, + 267.250633349, + 173.24876887999997, + 115.965794462, + 120.306294849, + 80.0698222023, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 12.3779387988, + 17.7880587988, + 79.5950208282, + 91.7363208282, + 153.360099561, + 158.661659561, + 197.400438716, + 198.127318716, + 196.054438716, + 191.248848716, + 183.40532871599999, + 136.954219561, + 88.9498104056, + 14.906028798800001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.5193406074, + 83.6135326716, + 150.54260913800002, + 228.84500942799997, + 237.71158942799997, + 243.73786942799998, + 247.24895942799998, + 249.628716011, + 249.850928518, + 249.78151201900002, + 244.062343909, + 232.43957513600003, + 170.848667081, + 161.80090664600002, + 154.363492149, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.4291275843, + 83.61708914339998, + 150.38867913800001, + 228.24296942799998, + 242.545917101, + 260.24178134600004, + 266.991932488, + 272.209243563, + 273.912571777, + 272.906354514, + 265.201409747, + 252.64017375, + 186.40602452599998, + 169.180249641, + 160.18981846, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 12.3344487988, + 17.7057887988, + 78.76206082819999, + 89.8557308282, + 150.057579561, + 155.710299561, + 186.104008716, + 195.44098871600002, + 191.922528716, + 187.317318716, + 179.846038716, + 134.967079561, + 87.8757504056, + 14.198038798799999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.7033840344, + 83.51644040560001, + 148.208519138, + 225.168229428, + 233.32700942799997, + 239.179329428, + 244.72127987599998, + 251.121113624, + 247.65648156700001, + 251.01603749699999, + 243.328763367, + 232.101014263, + 171.378893468, + 159.29917992599997, + 151.86065946, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 51.1541440344, + 84.3618804056, + 147.93403913800003, + 224.88243942799997, + 233.15776942799997, + 239.18783942799996, + 242.786469428, + 238.299329791, + 240.924100637, + 244.294814126, + 237.083505777, + 226.345829809, + 166.060823892, + 157.661011202, + 152.202488214, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 49.4144220293, + 65.6946608282, + 113.3750099831, + 178.41721871599998, + 235.47621942799998, + 241.95426942799998, + 252.61053682399998, + 271.49427770799997, + 281.85377422600004, + 278.535897406, + 269.318127036, + 256.478695698, + 164.411957237, + 107.989512838, + 116.39220425100001, + 79.9769903236, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 12.4003387988, + 17.3585687988, + 78.3781708282, + 90.7191808282, + 152.974659561, + 159.437349561, + 201.591318908, + 206.502873062, + 214.468739951, + 219.50816826300002, + 212.92692912500002, + 164.19775739099998, + 104.5304022606, + 14.7159187988, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.5272240344, + 83.28125040560002, + 151.183401079, + 258.316085275, + 272.1553947, + 283.466189734, + 293.22072942600005, + 299.375452587, + 301.686197453, + 298.769424085, + 286.59564381999996, + 269.77130502399996, + 199.32809372999998, + 179.62073431, + 171.210388531, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.6772340344, + 82.22552040560001, + 150.73955345500002, + 238.728375321, + 273.341995726, + 286.366201945, + 286.59320299399997, + 292.89047754999996, + 293.83468345200004, + 284.372294618, + 291.52311339900007, + 279.10919038000003, + 208.981164198, + 190.481060774, + 179.807210874, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.8294240344, + 83.80015040560001, + 153.168134017, + 262.977483237, + 283.95774618300004, + 300.043202867, + 306.034038065, + 308.06135966700003, + 306.591874646, + 301.069954521, + 288.28326569899997, + 270.341943528, + 200.783490457, + 181.765171176, + 171.283026297, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.29334403440001, + 83.08513040560001, + 149.43386913800003, + 242.75308958700003, + 272.802222413, + 292.818105652, + 302.28443197400003, + 306.85985431800003, + 307.01626110800004, + 299.41730524699994, + 286.03085472500004, + 267.54065319, + 197.886285564, + 178.09520998099998, + 167.839345221, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.2050840344, + 82.81207040560001, + 149.229429138, + 227.529122764, + 241.349032252, + 261.587288494, + 276.106463029, + 279.94520756900005, + 279.85121021500004, + 275.618244591, + 266.536542445, + 253.358941891, + 186.695965057, + 169.084052262, + 157.498943054, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 48.413852029299996, + 64.0094008282, + 109.9660499831, + 171.10222871599998, + 226.602413909, + 229.32311476, + 249.35486039100002, + 256.707277418, + 262.379780359, + 269.809877282, + 262.469186876, + 252.32862363200002, + 165.22503594699998, + 110.75941278, + 117.925389548, + 79.98958878010001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 11.8310787988, + 16.8402087988, + 76.78892082819999, + 88.19315082819999, + 149.812959561, + 156.195939561, + 200.29313000999997, + 214.695225888, + 217.912290123, + 216.3165948, + 208.92204242100001, + 154.109787012, + 95.613218999, + 13.874688798800001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.285054034400005, + 82.56840040560002, + 148.06195913800002, + 225.898789428, + 234.744879428, + 247.936587723, + 262.616509682, + 271.716021174, + 274.599016104, + 273.326771776, + 263.898581881, + 251.00364359800002, + 185.416712579, + 168.824375189, + 159.963594889, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.152644034400005, + 82.6305804056, + 148.839569138, + 227.00474942799997, + 243.539125157, + 262.05300099, + 271.53441019699994, + 277.023998215, + 278.519507103, + 276.635984272, + 269.697297519, + 257.551967384, + 189.715949243, + 172.36643837300002, + 165.776130203, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.11388403440001, + 82.6045004056, + 148.98353913800003, + 227.325859428, + 236.42632942799997, + 242.871039428, + 252.304870607, + 260.28015307100003, + 259.532812256, + 255.33726901499998, + 248.444854515, + 237.036839803, + 175.719463464, + 168.195043545, + 156.431284627, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 29.6807700512, + 50.0692840344, + 82.48658040560001, + 148.71410913800003, + 226.964429428, + 236.05617942799998, + 246.92564387000002, + 260.759464251, + 272.30714696200005, + 278.50146840300005, + 276.799263614, + 268.544796982, + 255.971262613, + 191.207550579, + 178.41732656399998, + 167.429539322, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.0675440344, + 82.40904040560001, + 148.85090913800002, + 229.907909631, + 265.270362197, + 290.14844208, + 300.29048602700004, + 305.15336401900004, + 305.000191893, + 301.43071935200004, + 288.432855512, + 271.18962167, + 199.48245734, + 182.145861244, + 170.68963433899998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 48.8807420293, + 64.79859082819999, + 112.98088998310001, + 178.400928716, + 246.08004676999997, + 273.7659737, + 287.512579863, + 289.964267122, + 286.85998867599994, + 284.74854792699995, + 277.027666184, + 261.348038622, + 168.939371816, + 118.04228909999999, + 122.21843333400001, + 80.18843100389999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 12.243148798800002, + 16.6262387988, + 76.7762308282, + 88.3605008282, + 150.552695892, + 161.881086704, + 215.286235204, + 220.91253774, + 219.255015339, + 215.56495779200003, + 208.358008576, + 158.358366243, + 99.5831423071, + 15.2810466483, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 49.2751940344, + 77.19351040560001, + 134.060659138, + 202.320559566, + 218.43815672, + 270.95986432499996, + 281.150942801, + 298.787676724, + 259.79973828900006, + 273.63708189, + 264.97190629700003, + 247.007535837, + 195.397879177, + 182.02214550300002, + 171.613422552, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.1471240344, + 82.3362704056, + 147.24497913800002, + 244.335182234, + 274.243430966, + 292.71871727, + 300.47738574, + 303.5542984, + 303.7764528910001, + 305.294799763, + 289.358943527, + 267.310273231, + 194.859218806, + 181.42476757800003, + 171.492411004, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.008594034400005, + 82.05566040560001, + 147.81406913800004, + 225.875979428, + 239.944152358, + 260.938930115, + 273.27771765, + 281.642570614, + 285.03465154099996, + 281.347418475, + 273.549606328, + 261.728333855, + 196.09204008600003, + 181.49938752600002, + 172.159764422, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.0021940344, + 82.0534804056, + 147.82657913800003, + 227.733732358, + 253.69487228100002, + 279.755296634, + 289.180741645, + 295.040319044, + 295.290977455, + 289.259128485, + 281.07113815699995, + 266.024888546, + 195.96749715099998, + 181.79894900599996, + 171.138305608, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 50.040114034400005, + 82.0732904056, + 147.44476913800003, + 225.23592942799996, + 237.989530795, + 263.309328407, + 277.995902698, + 283.132361344, + 283.14221569700004, + 278.561307495, + 269.855249847, + 256.658451946, + 188.30900735799997, + 174.61426594600002, + 166.76309449099998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 48.816672029299994, + 64.47073082819999, + 112.1987099831, + 177.286928716, + 237.91208351100002, + 251.41876947699998, + 259.214486239, + 264.356771452, + 266.18867848799994, + 264.06887175500003, + 257.835124758, + 246.584232016, + 163.278190699, + 117.454688927, + 130.113434233, + 85.30424118020001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 11.9996187988, + 16.3029187988, + 76.7722308282, + 91.9284985046, + 178.780023589, + 196.739780684, + 239.378861134, + 240.67957350599997, + 239.292335627, + 234.980408698, + 228.177539716, + 173.512824709, + 112.64446102800001, + 16.4859766483, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 49.9500940344, + 82.08870040560001, + 147.58013913800002, + 225.92339019699997, + 251.35738066599998, + 276.504149146, + 290.19204679800004, + 296.986700519, + 297.43536526099996, + 294.547263578, + 283.41231358, + 266.115587829, + 194.908257108, + 180.33492737100002, + 170.841428332, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 49.9018440344, + 82.08648040560001, + 147.29554913800004, + 227.07301167900002, + 245.25250021600002, + 267.10127993799995, + 282.295911092, + 290.92954976199997, + 294.04029911099997, + 291.62529852500006, + 281.86571332799997, + 266.486378904, + 196.11970009600003, + 179.84412982199999, + 169.94208084, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 49.2751940344, + 80.29559040560001, + 130.755575081, + 243.28168196800002, + 270.54253596399997, + 282.065452834, + 286.91889618700003, + 288.716211025, + 294.32795909500004, + 289.947591904, + 278.977532191, + 261.344279907, + 190.19330752400003, + 176.564714672, + 166.737806111, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 49.880484034400006, + 82.14172040560001, + 147.23343913800002, + 235.34243003900002, + 267.39275041, + 283.974814321, + 291.21256908699996, + 296.326788679, + 293.255375953, + 285.68374957099996, + 274.834503208, + 260.71034066299995, + 192.08589455400002, + 177.29742440200002, + 167.16109362, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.198691883799995, + 81.83455040560001, + 147.63632913800004, + 229.927802385, + 252.28612867, + 268.647692172, + 278.65675863100006, + 284.736453856, + 286.68879407199995, + 283.543137187, + 271.932215365, + 252.750611485, + 181.02375052399998, + 169.387670459, + 153.666559551, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 51.9647898788, + 64.41943082819999, + 111.92791998310001, + 177.126154179, + 243.493085747, + 262.74413389, + 275.170682138, + 280.75409873800004, + 270.175500304, + 275.01646648, + 266.90134775600006, + 253.774536417, + 161.65472328799996, + 111.07855970499999, + 116.30817116600001, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.2357666483, + 16.9990087988, + 76.6145208282, + 88.66123082819999, + 151.129409561, + 157.939649561, + 197.35840871599999, + 198.38883871599998, + 196.010175604, + 190.880361747, + 182.417958317, + 135.855359561, + 87.1403604056, + 19.274344497799998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.4280022408, + 82.20974509189999, + 148.670099138, + 227.90603942799999, + 237.68014942799996, + 244.85086942799998, + 250.025011672, + 258.151692122, + 258.066430793, + 252.90339783000002, + 244.08399324500002, + 231.550776329, + 168.250394732, + 157.475970286, + 150.987757527, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.03971188379999, + 81.80481040560001, + 148.42326913800002, + 244.338697139, + 271.156301577, + 290.012727107, + 302.96857434599997, + 314.45581211200005, + 316.07886636700005, + 305.209096704, + 291.406994801, + 275.233358452, + 204.75732271599998, + 193.192094567, + 181.044227236, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.038071883799994, + 81.82481040560002, + 161.093827473, + 275.296414971, + 304.46641491800005, + 320.42244180899996, + 329.384258856, + 336.81509598400004, + 333.52823101399997, + 328.72007144199995, + 316.96663743600004, + 300.36038317900005, + 217.368174832, + 194.63592762000002, + 178.574507339, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 53.000711883799994, + 81.71993040560001, + 166.615418956, + 278.570314917, + 294.481514443, + 309.319143132, + 322.58260380900003, + 328.508570425, + 324.47757135300003, + 316.54497150199995, + 302.355849143, + 280.885870163, + 203.11696617599998, + 185.75680431, + 169.919176283, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 52.96412188379999, + 81.66007040560001, + 148.17150913800003, + 226.72744942799997, + 240.530873253, + 259.055642613, + 269.114226246, + 274.610269118, + 275.27916050100004, + 272.48047127, + 262.588832792, + 248.644164956, + 178.66009216700002, + 166.53420908299998, + 153.520969881, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 51.7754598788, + 63.965150828199995, + 112.5807899831, + 183.120878204, + 268.226724347, + 291.374195827, + 303.584094965, + 305.462760907, + 304.659823482, + 301.12452394599995, + 292.90897910599995, + 273.69237358800007, + 175.414602614, + 125.23547935399999, + 130.630793055, + 83.15965708750001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.011726648300002, + 15.7806387988, + 77.87867262, + 106.6640520441, + 186.67224696499997, + 198.58489229000003, + 243.173482621, + 249.487844356, + 249.55365372699998, + 244.909488853, + 237.555506944, + 177.311706366, + 113.533086541, + 18.746964497799997, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 52.9648918838, + 81.46843040560002, + 152.00647524299998, + 260.048803964, + 283.005572472, + 298.639274852, + 308.927033975, + 315.32174602900005, + 314.41236626100005, + 308.83333894400005, + 300.15256736599997, + 281.013973299, + 205.077543618, + 193.05575761199998, + 176.892321334, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 52.93093188379999, + 81.4053904056, + 149.360073001, + 258.254651001, + 278.99396611000003, + 291.462723518, + 312.0079605, + 316.73853220300003, + 310.08254039300004, + 298.018727887, + 286.54866167299997, + 266.587353242, + 189.889431244, + 180.57998332300002, + 165.45110018, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 52.8868718838, + 81.76310040560001, + 148.293929071, + 255.561082347, + 276.94829176900004, + 292.235848868, + 306.160963779, + 313.03140931, + 309.529688548, + 305.13177381, + 296.531401421, + 278.52868086, + 205.94097253400003, + 196.695191297, + 180.490409793, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 52.8611318838, + 81.70167040560001, + 150.48640356099997, + 256.056220395, + 283.92702449399997, + 303.537614837, + 313.5220834670001, + 316.81838790200004, + 313.93489683300004, + 308.18242131700003, + 298.20660368399996, + 280.424281006, + 210.52900934899998, + 202.533875104, + 185.334149497, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.348209733299996, + 81.59950040560001, + 149.763316649, + 256.34849709499997, + 280.641399963, + 299.325280133, + 308.570432594, + 312.564853333, + 311.684202444, + 309.52902979099997, + 293.883587605, + 276.069344063, + 203.624861468, + 192.71297422900003, + 176.597344488, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 55.11725772829999, + 63.67597082819999, + 111.5700499831, + 177.130468716, + 235.28582075600002, + 249.901333338, + 262.48939370299996, + 268.769268165, + 268.704188657, + 265.684616367, + 257.714263656, + 243.744028532, + 153.42519090700003, + 108.081982935, + 116.02065319, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 18.4312844978, + 15.861458798800001, + 76.7264808282, + 89.6098208282, + 148.50671956099998, + 159.11732956100002, + 197.542428926, + 214.634128716, + 219.502248065, + 215.339507462, + 205.939705696, + 148.216045026, + 86.64620756180001, + 21.5973523472, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.318059733300004, + 81.4357104056, + 147.95856913800003, + 226.67496942799997, + 235.950039428, + 245.31746406, + 266.732376434, + 279.140510864, + 277.959245497, + 271.714006722, + 262.020346577, + 245.532395029, + 171.97274114300004, + 164.212841262, + 152.03541145999998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.2759097333, + 81.33791040560001, + 147.45404913800002, + 226.071209428, + 237.635105091, + 251.861430689, + 260.909178081, + 269.758875169, + 277.69583829600003, + 279.481294757, + 268.863232531, + 252.093829288, + 180.31320548500003, + 174.003767083, + 158.175024337, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.2408297333, + 81.24357040560001, + 147.335189138, + 226.03810942799998, + 237.087780776, + 255.288318181, + 269.279250316, + 277.598994075, + 282.519843186, + 283.275226517, + 272.279561122, + 255.899078398, + 185.776778117, + 184.128682493, + 165.083756051, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.2469997333, + 81.48150040560002, + 147.880069138, + 228.551986102, + 252.46831223199996, + 272.493854807, + 288.07476383500006, + 296.887616285, + 293.6239113969999, + 286.46986766, + 275.547842777, + 259.502177481, + 187.754692302, + 184.52540086800002, + 168.28272071, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.209019733299996, + 81.35362040560001, + 147.44840689200004, + 246.483287709, + 270.185779318, + 290.98173979300003, + 302.55128093, + 308.54487276, + 310.57692340599993, + 301.480548577, + 283.19341638599997, + 262.285748721, + 191.32624115399997, + 188.558970118, + 171.177949662, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 54.93569772829999, + 63.54040082819999, + 110.92608998310001, + 185.36627506600001, + 268.23668144500004, + 291.7188517, + 300.308991782, + 303.604251851, + 294.29829516300003, + 288.32512513200004, + 279.768188508, + 264.520004447, + 168.518186963, + 127.83454626300001, + 128.394833444, + 82.9148814461, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 18.171034497799997, + 15.7662187988, + 75.2580808282, + 85.3682208282, + 157.89312011799998, + 178.72203142200001, + 217.801634316, + 218.70666405400002, + 219.62999274499998, + 190.60735867300002, + 186.018558943, + 154.15488344, + 99.3314902847, + 25.0236701967, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.1278297333, + 81.1840804056, + 146.26087652299998, + 247.83267592200002, + 273.802876906, + 291.37051782, + 302.06380189799995, + 308.59095942700003, + 304.806066424, + 297.42287606800005, + 283.232924608, + 264.43064509299995, + 192.45645884100003, + 188.321433914, + 169.412838815, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.1278297333, + 81.00302040560001, + 146.55834913800004, + 227.442562435, + 251.53472717800003, + 271.150718104, + 281.606020475, + 287.07810784000003, + 285.881979458, + 279.906688969, + 269.37807675700003, + 255.050795359, + 186.862780908, + 184.47743760199998, + 165.493670571, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.1278297333, + 81.00297040560001, + 146.385689138, + 223.74298942799996, + 237.24258875200002, + 255.641270234, + 264.99715682199997, + 269.98419281099996, + 274.161999396, + 262.608634388, + 253.010870485, + 250.707041066, + 184.045523882, + 181.390814536, + 163.897701876, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.1278297333, + 79.66235040560001, + 146.14677913800003, + 224.23427884499998, + 243.008765665, + 270.11282360399997, + 287.530701895, + 293.832723094, + 267.850566858, + 247.47705588800002, + 273.86805987800005, + 242.52799231, + 183.273337075, + 190.751060059, + 169.255548413, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.1278297333, + 81.18780040560002, + 145.605779138, + 230.612346119, + 255.330294852, + 273.252749951, + 282.805105714, + 288.361962636, + 287.23406740099995, + 275.921695236, + 265.942285676, + 256.846897127, + 186.040322502, + 182.821379241, + 156.013817929, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 58.3233655777, + 63.480840828199995, + 111.64464998310001, + 176.89794871599997, + 234.42821942799998, + 250.093227238, + 269.44806679199996, + 280.48206651799995, + 288.854547419, + 286.087592869, + 275.374470499, + 257.654943157, + 158.766212541, + 120.233295468, + 117.733098145, + 80.5349815685, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 15.439348798800001, + 76.3193108282, + 88.11391082819999, + 149.457639561, + 157.25430673, + 215.545189634, + 193.20656877, + 184.51312827200002, + 183.98957487600003, + 213.327386717, + 157.512963436, + 96.40477551080001, + 28.4499880461, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 15.338698798800001, + 75.7959908282, + 88.0230508282, + 150.558019561, + 156.949549561, + 200.558325275, + 206.9843085, + 177.30006150300002, + 174.419127386, + 164.44758651700005, + 136.195312963, + 83.8781690571, + 28.4499880461, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.28274040560001, + 146.650399138, + 224.62684942799999, + 233.86876942799998, + 241.626463863, + 252.94928488600002, + 267.116851221, + 270.828635749, + 264.26605428299996, + 254.40990933, + 240.79366914899998, + 174.47473733500001, + 177.75167588300002, + 153.747475318, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.09045040560001, + 146.26206913800002, + 224.25384942799997, + 237.13610080100003, + 260.004547204, + 270.82443507, + 279.924151575, + 283.014625559, + 279.54130426700004, + 251.42322760200003, + 254.745412962, + 181.011585606, + 188.146301537, + 167.826734614, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.0997004056, + 146.17647913800002, + 228.63125208900004, + 253.70150914799999, + 280.605137675, + 293.483688564, + 297.753787881, + 300.95156523699995, + 293.575875048, + 280.04411726399996, + 262.23818604099995, + 192.39503086899998, + 197.27075608, + 177.628941442, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.18680040560001, + 147.503058056, + 252.36526050799998, + 278.89651230000004, + 294.888853293, + 302.762327573, + 309.06472737, + 310.135684992, + 303.18066776599994, + 288.004465386, + 270.22409427400004, + 200.894358054, + 206.927175369, + 182.18364681300002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 58.3233655777, + 63.616630828199995, + 112.25568129299998, + 202.11999440800003, + 285.581023659, + 304.44294937, + 313.290684885, + 317.049119485, + 314.759719501, + 304.92493256200004, + 290.60726518099995, + 271.638594398, + 175.580022448, + 144.94240462800002, + 140.345969834, + 98.0484376025, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 15.722018798800002, + 77.27909136379999, + 100.98003054079999, + 186.494989444, + 209.366269553, + 258.279006918, + 261.102184557, + 260.627239615, + 251.42334058999998, + 234.24513189700002, + 173.19745609199998, + 107.02703113, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.36922040560002, + 147.28166536699996, + 236.829875516, + 273.22484769199997, + 296.624971497, + 302.780436241, + 303.61264993099996, + 301.19990261199996, + 295.374519009, + 283.83758058300003, + 263.445555686, + 187.75889587299997, + 195.39861634800002, + 173.321469885, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.1687004056, + 147.16208913800003, + 226.265170285, + 247.55894467299998, + 270.21041801900003, + 285.639482015, + 292.35877669499996, + 289.499295917, + 282.83258002, + 273.396533953, + 257.710584999, + 186.820089236, + 194.854800394, + 170.56654966, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.13259040560001, + 146.72335913800003, + 225.310609599, + 245.41447747, + 264.591045659, + 274.126463864, + 282.110832164, + 284.11860321600005, + 280.212825869, + 268.544417541, + 251.673825436, + 182.262663821, + 190.13673303, + 165.914838508, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.18649040560001, + 146.339959138, + 224.63224942799997, + 233.99697369299997, + 258.291978837, + 284.214940073, + 290.37723519499997, + 286.807781879, + 279.160854192, + 266.163018906, + 245.640609514, + 174.36648534000003, + 184.899454182, + 163.562893133, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.5541475828, + 81.36691040560001, + 145.773049138, + 223.78805942799997, + 238.019366163, + 255.209142247, + 260.539704349, + 261.223320599, + 262.750832206, + 260.99858815, + 250.817348747, + 238.092745325, + 177.441910568, + 185.488473929, + 163.35897374799998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 61.7496834272, + 63.8738808282, + 112.6117299831, + 179.875138716, + 238.93520942799998, + 251.42983295099998, + 258.921396461, + 261.942313371, + 260.835594951, + 254.91425164199998, + 244.88710583800002, + 229.967868105, + 150.881121281, + 121.546033664, + 116.464006474, + 80.0448304186, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 15.811628798800001, + 77.8602608282, + 92.11660082819999, + 156.431965521, + 170.665476093, + 225.716797094, + 235.949964336, + 235.543860979, + 227.677741081, + 215.878026149, + 152.772157297, + 91.23227194260001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.5367304056, + 148.38288913800002, + 228.31372942799996, + 239.45168353300002, + 252.393298502, + 259.453426716, + 261.139001115, + 258.748830463, + 252.280392084, + 241.89069720700002, + 227.343175399, + 166.601554051, + 176.410700254, + 152.162410293, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.40646040560001, + 147.72745913800003, + 226.776479428, + 236.40164942799998, + 242.54916942799997, + 247.639693482, + 257.734218732, + 258.612008693, + 253.16777552500002, + 243.99496062699998, + 229.683712935, + 169.12192947399998, + 180.033177695, + 153.99827208, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.3267804056, + 146.78538913800003, + 225.98365942799998, + 236.398829428, + 243.63854942799998, + 247.260629428, + 247.55210942799997, + 244.22570942799996, + 238.77678216499996, + 232.26178036600004, + 220.069913577, + 159.93025595600002, + 169.819311538, + 151.178592192, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.0261606101, + 81.4411204056, + 147.88253913800003, + 227.47532942799998, + 237.414019428, + 245.50385605900001, + 256.225034687, + 263.471003145, + 263.045429672, + 256.329695351, + 246.14726838599998, + 232.113213492, + 168.99899284399999, + 176.769279425, + 152.636231673, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.0249747072, + 81.29513863719998, + 147.165349138, + 226.072359428, + 236.143429428, + 250.141593021, + 267.435233196, + 272.60087272799996, + 270.750709393, + 265.092686387, + 254.70982791, + 239.198456501, + 178.469981525, + 184.169007475, + 160.817776863, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 61.7496834272, + 63.581330828199995, + 110.6404399831, + 178.97181757500002, + 253.71811961299997, + 274.989361661, + 290.862912787, + 299.72940590999997, + 299.79149369699996, + 293.725085171, + 283.65958714000004, + 265.65999551000004, + 173.355824748, + 138.143275244, + 133.964176464, + 88.9348344682, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 15.691278798799999, + 77.2192408282, + 98.5726699331, + 185.687468061, + 211.24072609200002, + 260.666532641, + 263.44980926899996, + 267.72677796199997, + 260.652129493, + 244.994750334, + 190.860081787, + 122.708148953, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.42587040560001, + 161.42138834099998, + 272.951286129, + 307.58244162500006, + 340.56173800600004, + 346.66623379600003, + 341.82264941999995, + 335.664403249, + 325.635604823, + 306.829148539, + 279.71374178499997, + 206.81215851900004, + 208.068703894, + 185.64117534599998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.36069040560001, + 157.244879403, + 267.483457977, + 290.269404819, + 308.59718660000004, + 326.155641094, + 333.114904788, + 326.29909796500004, + 320.733624753, + 306.18117929899995, + 279.340892324, + 206.89995129, + 209.18248175099998, + 186.043015931, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.1381204056, + 146.49982913800002, + 225.098149428, + 236.90629398, + 260.098107366, + 269.806575301, + 275.962173731, + 276.376215141, + 269.36501154, + 258.991714975, + 241.120007233, + 176.550486361, + 181.450163835, + 155.446193389, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 81.35191040560001, + 147.129979138, + 226.009199428, + 238.58762623500002, + 261.72559492100004, + 270.998995147, + 273.227453191, + 270.915034564, + 263.915092583, + 252.234869678, + 235.298346972, + 173.88730621699997, + 178.093387537, + 154.00316302299998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 62.98046543219999, + 80.49138040560001, + 145.07422913800002, + 220.44802942799998, + 235.85892942799998, + 243.551405593, + 256.588321582, + 264.12748778099996, + 252.18001504499998, + 236.01651707, + 250.06072597799997, + 233.20387216900002, + 174.77627242799997, + 179.37785151, + 154.294190983, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 61.7496834272, + 63.3296608282, + 110.73195998310001, + 176.258408716, + 233.86175942799997, + 236.77596805400003, + 240.38896953500003, + 248.788326646, + 250.144781511, + 241.96176022600002, + 233.183499571, + 219.594735738, + 150.549732583, + 116.097590294, + 115.357945526, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 15.287938798800003, + 75.3898508282, + 88.1925608282, + 146.907549561, + 153.718519561, + 187.54322871600002, + 172.320308716, + 178.54719871600003, + 165.888998716, + 166.907818716, + 115.590419561, + 87.355433954, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.63566990509999, + 81.1395168443, + 145.97393913800002, + 224.024509428, + 234.242366041, + 255.51574516800002, + 274.438032685, + 285.814965056, + 285.498428355, + 275.425315145, + 259.195672945, + 237.06244682300002, + 175.315634249, + 176.551206329, + 154.233420694, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4067832817, + 79.44369040560001, + 144.471749138, + 224.28872942799998, + 233.98993942799996, + 240.493189428, + 244.864076976, + 247.37026448199998, + 243.966498804, + 237.011084283, + 226.74555670900003, + 212.328905811, + 159.809412931, + 169.60365638, + 151.46535073799998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.5768522433, + 80.98775588890001, + 146.04726913800002, + 225.01235942799997, + 235.783434059, + 249.531234249, + 259.598886729, + 262.446153296, + 258.594363844, + 251.013990201, + 239.560258157, + 224.002833229, + 171.201570561, + 173.36903368199998, + 153.622255355, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4519072739, + 80.88082040560002, + 146.42082913800002, + 226.176500863, + 240.802910026, + 254.915012402, + 267.705787347, + 276.871685338, + 275.329456015, + 257.813422908, + 247.629662013, + 227.37863106599997, + 180.120587065, + 185.292640872, + 162.606942899, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4067832817, + 80.5165604056, + 133.699289138, + 210.367562846, + 250.68866627200003, + 260.004520681, + 300.62026091099995, + 306.68391323, + 266.770092014, + 271.66762663099996, + 278.95343119, + 240.902244584, + 192.361402078, + 192.84873672, + 166.778553579, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 65.1760012766, + 63.5526708282, + 112.2508199831, + 179.57274871599998, + 238.736034999, + 255.062891074, + 271.699955362, + 230.379029447, + 240.80123720699999, + 226.657443938, + 226.178482475, + 229.26097056700002, + 157.365395581, + 118.957347285, + 117.713483262, + 80.60374977929999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 15.4780187988, + 76.5423308282, + 90.5460808282, + 154.44432758000002, + 163.756501147, + 210.19025866799998, + 218.67607222300003, + 218.09866792699998, + 210.57994536, + 197.507299945, + 130.183029197, + 92.5905557596, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 15.3146987988, + 75.9724508282, + 89.59576082819999, + 153.63258136099998, + 175.262752078, + 224.014840746, + 220.65296517400003, + 215.98026357300003, + 205.832733484, + 190.216218615, + 126.653975049, + 90.857940986, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4067832817, + 81.01626040560001, + 146.77795913800003, + 225.978939428, + 239.823472117, + 256.218723534, + 258.708131814, + 258.82570807999997, + 255.905543691, + 249.37442506099998, + 238.83772821899998, + 222.94245535399997, + 172.193883197, + 172.330119026, + 153.998246767, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4067832817, + 80.8474604056, + 146.24678913800003, + 225.116109428, + 235.279919428, + 243.59589715100003, + 260.84482487, + 268.946565554, + 264.46863388500003, + 255.978275684, + 244.22832658599998, + 226.5051922, + 173.244800605, + 171.65634912000002, + 152.640104396, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4067832817, + 80.7437604056, + 146.12183913800004, + 225.41359942799997, + 235.805307799, + 246.359744315, + 256.814036707, + 260.726562968, + 258.36265607300004, + 251.370900532, + 239.88068657699998, + 223.40455369199998, + 175.40044015200002, + 173.340638219, + 154.115625559, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.4067832817, + 80.82856040560002, + 146.256679138, + 225.43112942799996, + 235.761914175, + 242.61850562100003, + 246.883017974, + 247.6776906, + 244.994509621, + 238.02819825900002, + 226.98128961100002, + 211.823127429, + 164.874722101, + 171.120106711, + 152.376694652, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 68.6023191261, + 63.07407082819999, + 110.77345998310001, + 176.936828716, + 234.953799428, + 240.63231942799996, + 242.71593942799998, + 244.10453206, + 248.70719783299998, + 243.298665222, + 232.892351069, + 217.53581047400002, + 148.697301145, + 115.49634512899999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 14.905928798800002, + 74.7933708282, + 87.1919308282, + 144.31362956100003, + 151.086239561, + 193.403878716, + 187.796818716, + 181.486008716, + 183.390288716, + 169.381268716, + 121.94348956099999, + 94.20806965290001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.9512472562, + 80.3579729879, + 144.300299138, + 222.83975942799998, + 232.91153942799997, + 239.03763942799998, + 243.20675618, + 244.73506790700003, + 244.975949753, + 239.196644209, + 227.865442587, + 211.923362867, + 168.084887712, + 170.08494646600002, + 151.897466353, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.123584253, + 80.4316244031, + 145.33667913800002, + 224.026859428, + 234.29618345000003, + 244.676948095, + 254.330342103, + 258.60650358500004, + 257.86353694300004, + 251.85546536800004, + 240.02744358700002, + 222.89375177999997, + 175.663577768, + 172.564299219, + 154.00964487500002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.83310113120001, + 80.4043204056, + 145.80049913800002, + 224.93922942799998, + 237.374663625, + 246.877744213, + 249.698805258, + 257.94766907, + 263.60814513, + 256.156569281, + 241.975523483, + 221.449402476, + 170.932583777, + 171.946066195, + 153.328241727, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.83310113120001, + 80.41638040560001, + 145.97229913800004, + 229.92739579699997, + 255.792806601, + 261.667749462, + 264.718923414, + 263.826422772, + 259.625755156, + 252.495078577, + 240.39126657900002, + 224.32092337900002, + 178.77743081699998, + 173.309140689, + 154.67514706600002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.83310113120001, + 80.1210604056, + 146.011605407, + 240.38778867, + 267.712946663, + 296.99120268699994, + 300.53767669, + 297.514790936, + 293.030951717, + 286.431267452, + 264.24438003299997, + 231.573132208, + 180.041193143, + 173.90315999499998, + 155.36426346800002, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 68.6023191261, + 62.12186082819999, + 110.04471998310001, + 176.305458716, + 234.67748942799997, + 240.80750942799997, + 243.40653942799997, + 242.52745676, + 251.074412183, + 251.99456073399998, + 239.56756251599998, + 220.262551336, + 149.481020513, + 115.381513985, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 13.852028798800001, + 74.420819475, + 87.5067808282, + 150.610349561, + 156.332179561, + 194.018718716, + 193.001728716, + 189.22310871599998, + 182.217694899, + 171.33137871600002, + 120.102049561, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.96274588520001, + 79.60715760859999, + 145.292033664, + 224.482229428, + 234.73400942799998, + 241.260279428, + 244.16377942799997, + 244.511483821, + 254.75843052000002, + 252.655268181, + 239.96869794499997, + 220.946271355, + 172.890876477, + 168.587904659, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.009829063, + 79.3891726258, + 145.197999138, + 224.42911942799998, + 234.43475942799998, + 240.70062942799998, + 244.343518374, + 246.413805305, + 248.564995084, + 244.18999339600003, + 232.26552130800002, + 215.631634359, + 172.219932514, + 170.274739591, + 152.007691751, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.0072888922, + 78.893180937, + 143.977189138, + 222.668589428, + 232.81528942799997, + 240.851424927, + 249.448152094, + 253.605730387, + 244.866180745, + 226.099619312, + 220.674056326, + 210.11656267799998, + 171.51776048099998, + 169.837872588, + 151.853574438, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.97085777000001, + 82.1537240625, + 143.89585913800002, + 222.68342942799998, + 233.26024942799998, + 239.93898942799999, + 242.930365287, + 242.886459445, + 239.269916025, + 230.515700627, + 218.19960601099996, + 203.12190576999998, + 169.91404649799998, + 169.805917913, + 151.615885253, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.3854923508, + 82.3852345438, + 144.21819913800005, + 223.86669942799998, + 235.05399942799997, + 244.60429893499997, + 252.837200069, + 253.454093435, + 249.283593444, + 241.50869526, + 228.58001110300003, + 210.597377414, + 171.497147801, + 170.53060463900002, + 151.881904481, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 69.12727279849999, + 65.00021368889999, + 110.34091957679999, + 177.59009871599997, + 236.62221942799997, + 243.33523942799997, + 247.12877117800002, + 247.967265956, + 244.423164885, + 236.49566875099998, + 224.377994387, + 207.23965160199998, + 152.70658983599998, + 115.70391593999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 16.417906648299997, + 74.8590311192, + 88.6953808282, + 152.614839561, + 159.921419339, + 205.01622759400001, + 209.61764706199997, + 205.400196697, + 193.444049274, + 177.76187105500003, + 121.929949612, + 97.63831956339999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.3106119435, + 82.29735805969999, + 145.116369138, + 224.586579428, + 236.083265174, + 257.096630201, + 276.769638151, + 285.035819592, + 286.61360079599996, + 282.881305876, + 263.29139649499996, + 235.240294828, + 187.85440626899998, + 181.883823438, + 158.51372840899998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.88910110249999, + 81.8717877291, + 144.86749913800003, + 224.290422347, + 240.843598184, + 265.530437928, + 281.22443976, + 289.96230793000007, + 271.396758112, + 265.23383827, + 241.980995243, + 222.259331967, + 181.486020301, + 173.903343234, + 153.02433753100001, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.8990998023, + 81.7905712654, + 144.546829138, + 223.922804718, + 237.28378514899998, + 263.557358823, + 266.022292688, + 265.381816501, + 261.81492059000004, + 254.60232916300004, + 242.47766039500002, + 221.628305037, + 176.704516295, + 171.37767475500002, + 152.88116227999998, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 69.92872631430001, + 81.63309447640002, + 144.242719138, + 223.64410942799998, + 234.87033942799997, + 236.03984525799999, + 227.09538725199997, + 221.35800616699998, + 242.711384664, + 224.97756105800002, + 220.027033739, + 207.096798588, + 170.482011034, + 169.389215938, + 150.876189156, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.5881472472, + 81.7422872772, + 143.77161281500003, + 223.199419428, + 233.94635942799997, + 240.912009328, + 244.98727214200002, + 245.81960524599998, + 242.58394821899998, + 234.92583803600002, + 222.671195793, + 208.75587662499998, + 171.221833205, + 169.922150884, + 151.357198363, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 69.1023640495, + 64.0594847072, + 109.6721183483, + 176.745628716, + 236.15565942799998, + 243.33309942799997, + 246.332009428, + 245.33931942799998, + 240.76399942799998, + 232.26699942799996, + 219.661159428, + 205.14345727699998, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9435045609, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.4952566483, + 74.2109630281, + 87.3062485857, + 151.216259561, + 158.130129561, + 196.440748716, + 195.54105871599998, + 191.05987871600001, + 183.02263871600002, + 170.208718716, + 120.73778741, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 57.638458800500004, + 90.6887237903, + 156.94009913800002, + 233.50810942799998, + 240.400689428, + 243.47051394699997, + 244.11235427999998, + 241.27074241799997, + 233.29513716099999, + 221.079429554, + 206.90601551599997, + 219.22265568, + 169.857476625, + 169.178864766, + 150.79597698, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 57.319019758399996, + 90.53448180279999, + 156.56143913800003, + 232.81106942799997, + 239.28110942799998, + 247.60071735299996, + 256.522499613, + 253.18638127199998, + 245.545203692, + 232.642381542, + 209.818447325, + 219.513533787, + 169.83029883999998, + 169.360577727, + 151.024874843, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.914439650199995, + 90.3057138714, + 156.156129138, + 232.032429428, + 238.92205304, + 249.28053844899998, + 254.84721184100002, + 251.174517797, + 243.21158332299999, + 230.78884741500002, + 215.037145148, + 220.905786517, + 170.662971471, + 169.766650712, + 151.694152392, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.915379544800004, + 90.0016434316, + 156.02404879800002, + 238.51162738399998, + 260.78113288000003, + 272.828684286, + 279.222189102, + 273.666900748, + 260.187995061, + 241.823894611, + 224.36802495400002, + 232.774019853, + 174.977792222, + 171.446330074, + 152.939777506, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.4725205711, + 89.6293004056, + 155.43373913800002, + 231.83654415299998, + 251.874474823, + 269.35871387, + 263.97264451, + 272.257308108, + 262.616449192, + 247.43017782799998, + 226.802480116, + 230.926469628, + 173.202919624, + 172.218047644, + 153.73290166, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 54.9551974171, + 72.1503908282, + 120.73889998310001, + 185.465787412, + 257.181130118, + 269.95059255999996, + 270.13158366100004, + 267.040899859, + 263.437356569, + 250.569534175, + 227.09371022000002, + 232.24722252299998, + 154.424121275, + 118.031625811, + 117.506107634, + 80.3364116499, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 18.171034497799997, + 21.9822987988, + 82.91105082819999, + 94.0111608282, + 154.90185956099998, + 157.908029561, + 192.682478716, + 176.303948716, + 179.545564517, + 166.928666357, + 155.51692409099996, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.58880349539999, + 87.8749789592, + 145.907919138, + 230.80613942799997, + 238.32057942799997, + 241.50255942799996, + 241.02682942799996, + 237.05270942799996, + 229.25958942799997, + 216.843839428, + 206.430735127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.7652937465, + 82.6254606922, + 146.15565913800003, + 230.98150942799998, + 237.97828232900002, + 235.92193593000002, + 238.87020141, + 237.379610034, + 233.784812173, + 222.90007537000002, + 209.114662959, + 219.62400217500002, + 170.53271117399999, + 169.43891061, + 150.940749445, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 56.956353165900005, + 78.7802429325, + 154.443809138, + 219.078239428, + 238.72542942799998, + 242.122969428, + 241.79693942799997, + 237.899509863, + 230.016270922, + 217.080949888, + 204.232447279, + 216.952387416, + 168.55294360000002, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 58.1075231296, + 89.844647573, + 155.955868448, + 232.32634086500002, + 239.04317956100002, + 242.352217576, + 241.61354301600002, + 237.04268942799996, + 229.03550899700002, + 216.358310599, + 205.962988026, + 217.179633282, + 168.99707058200002, + 168.97779117, + 151.284839882, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 61.214324398500004, + 90.66837092669999, + 157.148049497, + 234.77392942799997, + 242.246179428, + 245.31764942799998, + 244.36975942799998, + 239.94522942799998, + 231.59395942799998, + 218.083079428, + 206.23948512700002, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 59.145902437000004, + 71.6673894429, + 120.36410998310001, + 184.551698716, + 240.15073942799998, + 243.208064376, + 243.07084470200002, + 238.75376262199998, + 230.667366956, + 214.066404648, + 204.334295453, + 217.404627504, + 151.02089641900002, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 16.5857787988, + 76.34462456210001, + 95.49581082819999, + 145.98442956099998, + 150.864879561, + 171.10636871600002, + 164.897218716, + 155.18522871599998, + 164.66760871600002, + 155.258734414, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.2497903316, + 88.1618175138, + 143.379200254, + 230.285719428, + 225.76219942799997, + 227.89991942799998, + 208.08238942799997, + 237.09244523900003, + 229.337728287, + 216.43990233300002, + 205.565249902, + 217.257503008, + 168.77767391700002, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.0799069163, + 88.1630305246, + 154.19899913800003, + 233.38771255, + 259.2038438, + 269.277076988, + 271.73814423, + 270.952284378, + 251.581327268, + 236.288614496, + 227.419720185, + 233.054605605, + 175.465536418, + 172.642907076, + 154.018150095, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 59.575491187900006, + 87.6833304056, + 154.22077913800004, + 233.34775777500002, + 243.910369616, + 255.839628945, + 259.742287523, + 257.036052224, + 249.40984450899998, + 236.660366586, + 223.132134171, + 223.675506074, + 172.458072087, + 171.221855786, + 152.156044874, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 15.7191087988, + 75.5784208282, + 83.1738208282, + 153.41117956099998, + 156.95076956100002, + 191.922038716, + 187.927398716, + 179.912088716, + 160.934308716, + 155.262884414, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.471993278700005, + 88.4733811397, + 155.37861190499999, + 232.373879428, + 240.160199428, + 243.65068359500003, + 243.59968813, + 239.779272241, + 231.180215077, + 217.995615203, + 204.36110068899998, + 216.75021975899998, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 58.9608671368, + 64.1294159361, + 119.287348884, + 183.294802798, + 238.725459428, + 242.25976942799997, + 241.88660942799996, + 237.88745942799997, + 229.873369428, + 216.96687942799997, + 205.375425127, + 216.706946524, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 21.5973523472, + 15.6477587988, + 83.5062108282, + 93.8920608282, + 153.621369561, + 157.238719561, + 192.414418716, + 188.35181871600003, + 180.16932871600002, + 167.895708716, + 157.03824441400002, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 60.177014169500005, + 81.6999428245, + 153.829819138, + 230.23671328900002, + 239.263940022, + 249.800483386, + 259.167784716, + 259.827194777, + 253.683557933, + 241.26096589000002, + 225.21334202100002, + 229.509496485, + 173.340909712, + 171.072895935, + 151.715346393, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.8589395508, + 81.0502046531, + 144.41816913800002, + 219.87260942799998, + 229.76721942799998, + 229.980849823, + 229.199644837, + 234.631164928, + 227.937637018, + 216.33041761500002, + 206.074117173, + 217.569462338, + 168.597588932, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.4028736323, + 81.1083201083, + 144.979899138, + 229.03985942799997, + 236.82214942799996, + 242.088322883, + 244.792079663, + 241.870669346, + 233.593358526, + 221.11882355999998, + 209.308542079, + 219.181938621, + 169.432359631, + 168.56968848900001, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.30970058, + 86.378177952, + 152.76644913800004, + 229.642889428, + 237.208923623, + 243.34913298300003, + 243.87767651500002, + 239.875939433, + 231.54953023599998, + 207.31879951599998, + 205.86058409999998, + 217.9260735, + 168.86329233, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.0436862193, + 78.48784013119999, + 139.08204999599997, + 209.970169428, + 196.91733942799996, + 200.59742942799997, + 197.804159428, + 198.231199428, + 202.05327942799997, + 200.00030942799998, + 204.906765127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.7988953, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 63.2692404363, + 68.2561308687, + 117.0942456372, + 174.51650710899997, + 228.687849428, + 227.684879428, + 230.36734942799998, + 220.33516942799997, + 205.74770942799998, + 197.45098942799999, + 203.001675127, + 216.706946524, + 150.786658811, + 115.522935929, + 115.623962647, + 80.35011228980001, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 25.0236701967, + 13.7287187988, + 66.9453438575, + 66.1266910474, + 122.25883268899999, + 139.07478052200003, + 173.662930174, + 178.999166923, + 172.092847342, + 167.280770406, + 156.65752221900001, + 133.933229452, + 98.6349997115, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 65.08633296139999, + 85.98092097, + 131.367474811, + 229.59369475799997, + 217.98328942799998, + 223.49385942799998, + 226.52636942799998, + 210.31368942799998, + 196.490219428, + 215.924859428, + 203.303095127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.797835451, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.3072508739, + 85.35176909, + 153.07024204199996, + 230.93334942799999, + 239.40852428300002, + 249.66729437499998, + 253.524513594, + 244.31796001, + 234.735932375, + 220.00790218, + 208.308323172, + 217.121738483, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.6085891304, + 84.8532592765, + 152.220339138, + 229.184159428, + 236.718559428, + 240.95541495100002, + 232.37957393899998, + 237.475828171, + 218.964168541, + 211.21589777499997, + 208.571065447, + 217.225333288, + 168.98817268000002, + 168.640211285, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 63.6358553966, + 84.53773028760001, + 152.24131913800002, + 229.653589428, + 237.29739942799998, + 241.156849428, + 240.81861942799998, + 224.186579428, + 228.55368942799998, + 215.90261942799998, + 208.207252976, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 64.1057948287, + 84.79294771939999, + 152.688927138, + 230.20373942799998, + 238.411987646, + 243.294369668, + 243.49703127899997, + 239.445389385, + 231.048168973, + 217.834738657, + 209.701295242, + 217.90302774, + 169.32847182600003, + 168.5309635, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 66.2036203635, + 67.1555122799, + 117.5825932734, + 182.29356871599998, + 234.987079428, + 236.354139428, + 241.51629942799997, + 229.68139942799996, + 229.26845942799997, + 216.76623942799998, + 208.476512976, + 216.706946524, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 18.0213287988, + 81.1184542746, + 92.3518408282, + 153.552889561, + 157.935769561, + 193.776448716, + 162.995458716, + 158.138588716, + 168.022868716, + 159.96517226400002, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.346509155, + 33.392057242599996, + 33.3695262576, + 68.2914835058, + 84.6647990132, + 152.21813397199998, + 222.027475006, + 219.29289942799997, + 240.99233942799998, + 197.91743942799997, + 209.66937942799998, + 201.098379428, + 205.72842942799997, + 204.26461512699998, + 216.706946524, + 168.500818925, + 168.921224596, + 151.619856366, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.2503839361, + 33.264699195, + 33.8027606411, + 34.095540346300005, + 34.4217098373, + 68.95656775009999, + 85.1516192145, + 152.50161247600002, + 230.01496942799997, + 238.30407942799997, + 242.66149942799998, + 242.52606942799997, + 238.27325942799996, + 229.88104942799998, + 217.079429428, + 205.131425127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.3144229257, + 33.5815587627, + 34.0041479176, + 34.072259395399996, + 34.376078837, + 68.8762144113, + 84.78307552029999, + 152.385564738, + 229.961559428, + 238.26442942799997, + 242.31742942799997, + 242.04587942799998, + 238.06487942799998, + 229.75389942799998, + 217.03619942799997, + 205.307895127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.401671038399996, + 33.526202160900006, + 33.539112979, + 33.8001186573, + 34.1416222222, + 68.6781547491, + 83.9574547404, + 141.425494338, + 228.54201942799997, + 235.999979428, + 239.211439428, + 239.47816942799997, + 236.04973942799998, + 228.468559428, + 216.251449428, + 205.114045127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.2162920253, + 33.3363472554, + 68.1781353352, + 83.07710048460001, + 142.327699138, + 228.735229428, + 225.86676942799997, + 226.83800988599998, + 225.523465589, + 201.342414006, + 220.248373174, + 216.78792234999997, + 203.585265389, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 66.5327447411, + 65.8717886982, + 116.4159568814, + 181.587828716, + 238.48190942799997, + 243.51970369499998, + 244.767878659, + 240.862895967, + 232.484129314, + 219.574874299, + 207.390563184, + 217.299449058, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 28.4499880461, + 17.2408987988, + 80.89162082819999, + 92.45071082820002, + 154.863484062, + 162.634265095, + 204.302606358, + 197.78707906100001, + 190.863990706, + 181.20672866200002, + 160.587686679, + 134.407984272, + 98.11667474869999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.4926085616, + 81.6755111783, + 134.866189138, + 227.880370657, + 234.104560081, + 254.182153164, + 275.088475898, + 270.7009831, + 256.720184917, + 237.490693604, + 219.15704451, + 220.74618134899998, + 171.487835572, + 170.530549526, + 152.061209479, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 67.1381684582, + 82.65239857590001, + 151.51001913800002, + 230.08731671100003, + 251.304170916, + 274.426813936, + 277.740893164, + 271.35359450199996, + 258.72821821800005, + 243.019955197, + 225.320620627, + 229.639300792, + 175.027679269, + 173.267111776, + 154.605506693, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.5574719854, + 82.3008204056, + 150.83161913800004, + 229.499564601, + 250.16815366900002, + 270.708005967, + 283.238144001, + 280.005972027, + 264.769634887, + 247.429159928, + 222.69797051299997, + 221.588052683, + 171.721629148, + 170.467264839, + 151.877494568, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.76227187479999, + 79.1553590427, + 140.833159138, + 215.48975879999998, + 243.861175352, + 270.973629929, + 260.152368974, + 263.692335382, + 255.46911128300002, + 239.33370527099999, + 216.379939986, + 220.95895033399998, + 171.645244213, + 170.80300186300002, + 152.122239918, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 66.961547701, + 81.8491374736, + 149.66646913800002, + 228.135892586, + 241.02444092699997, + 239.644128333, + 250.82779232399997, + 247.30910767999998, + 239.57075063700003, + 227.4730421, + 212.685107381, + 219.97761011400002, + 170.185698645, + 169.240674484, + 150.87909960300001, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 66.1918194813, + 64.6359119068, + 114.7560224284, + 179.454708716, + 236.153384341, + 241.41018121899998, + 241.71538248299998, + 221.361083824, + 225.48472035999998, + 205.315621338, + 204.849065516, + 217.670389171, + 150.775396235, + 115.34805707999999, + 115.34805707999999, + 79.9207179249, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 15.8695887988, + 79.2182490599, + 90.83879082819999, + 152.081081033, + 157.974748189, + 194.640869582, + 189.704361234, + 177.654557873, + 168.788508716, + 155.64991441400002, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.77559417169999, + 83.20146038330002, + 151.642940508, + 229.506999428, + 238.853863813, + 256.095800482, + 263.335949991, + 246.096710621, + 232.32599017399997, + 214.43672514800002, + 205.74651895, + 217.829547982, + 169.216481009, + 168.543561939, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 16.1897387988, + 80.62901853559998, + 92.3255508282, + 155.003637362, + 155.94485634, + 207.17649111599997, + 214.84058179000002, + 203.664242159, + 183.881676523, + 162.906132114, + 133.079947242, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.9102656636, + 82.2863245655, + 150.298378094, + 227.49638942799996, + 226.86991942799997, + 230.08132942799998, + 228.06394942799997, + 222.937479428, + 216.492919428, + 205.85311942799999, + 203.43005512699997, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.0642269696, + 79.07094481419999, + 137.02852165199997, + 206.07574942799997, + 216.00933942799998, + 226.83547942799999, + 231.95139942799997, + 221.13289942799997, + 209.74521942799998, + 217.45224942799996, + 204.192935127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 71.13484557039999, + 78.3185619394, + 143.352165699, + 219.168309428, + 216.150489428, + 206.09630942799998, + 205.399059428, + 198.83371942799997, + 202.48385942799996, + 201.77026942799998, + 203.240435127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.775396235, + 60.9083742719, + 33.107087900699995, + 33.107087900699995, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 69.84820696710001, + 61.1576854134, + 95.5366401973, + 157.80266004400002, + 201.36617942799998, + 203.95420942799996, + 199.21152942799998, + 203.55445968499998, + 222.622015705, + 200.47506645800001, + 206.524565127, + 216.706946524, + 150.775396235, + 115.34805707999999, + 115.414618495, + 80.18184590189999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 14.934278798800001, + 62.8740335445, + 72.824982439, + 115.801119561, + 122.110629561, + 157.706428716, + 156.261508716, + 153.825328716, + 153.534988716, + 155.097074414, + 133.061726657, + 97.63438750239999, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 31.876305895599998, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 33.107087900699995, + 70.6639834548, + 81.2630978375, + 148.63070680099997, + 226.36635028499998, + 235.57377942799997, + 240.230719428, + 229.495499428, + 225.33304942799998, + 230.49557942799999, + 212.03564942799997, + 208.766635127, + 216.706946524, + 168.489065812, + 168.489065812, + 150.790891642, + 60.9083742719, + 33.107087900699995, + 33.107087900699995 + ], + "critical_load_series_kw": [ + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.0825779467, + 16.1940740764, + 16.3792709196, + 16.36236526635, + 5.8159841199999995, + 30.4454442535, + 29.948087641, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 75.67873828249999, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.93463043525, + 39.144601623499995, + 65.2503425405, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.244532906, + 84.2459556135, + 75.425857705, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.7737453346, + 39.133430126049994, + 65.52504359250001, + 98.244702057, + 98.08727139, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.258767659, + 84.3606472095, + 75.54641717, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.8289266807, + 39.1525388612, + 65.4387355805, + 98.0766909895, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.7032525087, + 39.13324098535, + 65.73176077400001, + 98.6273313215, + 98.5803765585, + 98.5217491685, + 98.5224687115, + 98.5364321545, + 98.536721342, + 98.3879792935, + 100.0259452265, + 108.680057484, + 84.6323553725, + 84.696616961, + 75.87522944749999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 16.06619674345, + 16.4401459875, + 16.42034179565, + 16.5319430043, + 35.5986135471, + 30.8088586586, + 47.996797263800005, + 74.0402767375, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 75.3876981175, + 57.674028539999995, + 57.684197782999995, + 40.10646857055, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.0157476851, + 16.030614242, + 16.0572089538, + 5.697231791, + 30.045383660949998, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 75.67873828249999, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.793373751, + 39.14933736705, + 65.4495116485, + 98.08212518399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.80861916715, + 39.017204696200004, + 65.1718288305, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.6494164684, + 38.94465598535, + 65.144496535, + 98.07451971399999, + 98.0822480495, + 98.41418898399999, + 98.7151813425, + 98.676603145, + 98.6810024995, + 98.681689083, + 100.22670647749999, + 108.37881044100001, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.58504826065, + 39.0096579653, + 65.33071794199999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.57246591345, + 38.88007140075, + 65.1237501025, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.93611638135, + 30.0042599661, + 47.4168087889, + 73.965579358, + 98.07451971399999, + 98.484086617, + 99.896680656, + 101.850011469, + 103.0826315105, + 101.177759614, + 99.80134404750001, + 108.980054612, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.3249371345, + 58.079079978500005, + 76.41081332350001, + 76.256148506, + 76.25560495549999, + 76.0934708835, + 74.99023676, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 30.08682480305, + 29.69035465255, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 66.5308633285, + 48.8279426668, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 36.0276125896, + 39.200030410000004, + 65.2527652505, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 108.353473262, + 84.244532906, + 84.244532906, + 75.392416238, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 36.05644885275, + 39.342321552650006, + 65.7206993975, + 98.559464615, + 98.559205739, + 98.33126073, + 98.2877148765, + 98.3097371195, + 98.3615093635, + 98.372864253, + 98.4283925325, + 108.8239585915, + 84.7904081745, + 84.8047097815, + 75.90711537600001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.57422693465, + 16.57898958425, + 16.6080614608, + 36.2021079645, + 39.2880445205, + 65.260379016, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.67504943475, + 38.89988518965, + 65.12451180949999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.9710777979, + 16.10178004525, + 16.1326024643, + 16.152001938799998, + 35.3153079417, + 30.28601806375, + 47.5725971765, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 108.353473262, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.9845509273, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.09308223645, + 16.205957639999998, + 16.28593611605, + 16.415423073750002, + 5.931463814, + 30.1729329521, + 29.68818033495, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.622126355949998, + 16.553543950349997, + 35.8657489497, + 39.13145512685, + 65.2196297, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.62602431165, + 16.636828804500002, + 35.8115790579, + 39.04652165185, + 65.2027517455, + 98.07451971399999, + 98.07451971399999, + 98.1018454865, + 98.2329326805, + 98.225058757, + 98.23074081349999, + 98.227244665, + 98.220534113, + 108.3605367575, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.76813046775, + 38.8518314275, + 65.10874456900001, + 98.07451971399999, + 99.102700913, + 100.49345672199999, + 100.3190243075, + 104.961138758, + 108.712375115, + 107.2212460555, + 102.4426518805, + 108.2068983375, + 85.303369421, + 85.247404257, + 76.3916161165, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.50356531845, + 38.6383230115, + 65.10874456900001, + 98.07451971399999, + 99.03420573349999, + 105.994454397, + 112.12772770950001, + 115.5460249655, + 117.8097664995, + 118.3157915685, + 114.61594689649999, + 117.672513899, + 90.1234317925, + 85.8485134225, + 76.414337214, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.26244490135, + 38.5435328082, + 65.10874456900001, + 98.12839789399999, + 101.9768567665, + 109.30702717800001, + 115.797920811, + 120.55840448750001, + 120.18231262, + 114.024602098, + 106.36261798, + 112.312113923, + 89.94162105, + 86.9262679015, + 76.56327491, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 32.69633070685, + 29.71778223215, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 102.9431003075, + 112.213818456, + 113.129633114, + 110.564747535, + 106.2688053445, + 100.927779559, + 107.684346612, + 75.50069591500001, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 29.75501205395, + 29.6814054141, + 56.277154749000005, + 57.5316308305, + 75.73599943149999, + 75.72346821299999, + 75.702877039, + 75.23963964449999, + 74.5806606025, + 64.817704404, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.77251288715, + 38.86041186415, + 65.1401928685, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 106.6403143375, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.00752682465, + 39.03969494675, + 65.344951919, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 106.6403143375, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.0669362397, + 39.08994822935, + 65.4178807665, + 98.081606894, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 106.6403143375, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.79483765455, + 38.9582250467, + 65.365875693, + 98.1176908675, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 106.6403143375, + 84.244532906, + 84.244532906, + 75.41451564, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.8648353716, + 38.9932845652, + 65.4124149925, + 98.205875721, + 98.0872745625, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 106.6403143375, + 84.3019628105, + 84.4020390965, + 75.62017386400001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.003226943650002, + 33.82339635555, + 30.40652977085, + 47.5884316693, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 104.927155413, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.974537339649999, + 14.33389988365, + 5.7636614557999994, + 30.09603338595, + 29.6915831959, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 63.10454547900001, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.063895478700005, + 38.99877963805, + 65.25398926849999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 104.927155413, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.85370309525, + 38.99961352365, + 65.3742951265, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 104.927155413, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.961788867799996, + 39.0103906644, + 65.2676472455, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 104.927155413, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.0097782284, + 38.9176217682, + 65.392000716, + 98.1764522985, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 104.927155413, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.406229639500005, + 39.1807677567, + 65.30615338749999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.50511811700001, + 99.93492709, + 100.323427327, + 99.89326239149999, + 105.715254201, + 84.3159407825, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 31.409527547600003, + 29.86456387985, + 47.395074991550004, + 74.009958864, + 102.2614060815, + 107.68623964199999, + 107.38768409849999, + 107.257512324, + 107.21726776999999, + 107.043520781, + 106.15184967649999, + 109.3470595985, + 76.505554181, + 58.0620030795, + 57.771072617, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 29.68157749985, + 29.6814054141, + 56.387758264999995, + 56.8663631285, + 75.3052176715, + 76.337036001, + 77.617099907, + 78.1841646625, + 77.19246588749999, + 64.193983108, + 48.841956917299996, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.72014607755, + 38.56333167815, + 65.10874456900001, + 101.31546794650001, + 108.67704792800001, + 114.570592078, + 119.6953879875, + 123.76539824900001, + 120.8625042015, + 117.8501001665, + 112.8659600795, + 112.4535447055, + 86.00407892850001, + 85.4208818675, + 76.210518069, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.69433838085, + 38.55758386465, + 65.10874456900001, + 98.46200540599999, + 104.7878013635, + 113.8479107225, + 112.661012328, + 110.62469788, + 110.5692181135, + 110.0599928795, + 108.207342968, + 107.82749134800001, + 85.795846215, + 85.2384394855, + 75.9498439935, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.7683217976, + 38.627071481899996, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.3166363135, + 98.704372847, + 98.685733684, + 98.6474697015, + 98.587141701, + 103.557016222, + 84.317359627, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.77875820095, + 38.7520692947, + 65.19417269350001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.0803201619, + 38.9238544249, + 65.32241882299999, + 98.10096803600001, + 98.07451971399999, + 98.1099485585, + 98.16790913550001, + 98.183795389, + 98.128775144, + 98.14318587, + 98.2381379585, + 103.40922031999999, + 84.47329634, + 84.5364651375, + 75.7103515275, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 32.0297434838, + 30.439978275399998, + 47.81290057175, + 73.98425708900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 75.3876981175, + 57.674028539999995, + 57.678596153499996, + 40.0606098906, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 30.0821584746, + 29.74040143045, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 61.391386554499995, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 30.3433534517, + 30.055558625899998, + 56.452568955000004, + 56.543683924, + 74.273772199, + 74.0816883225, + 73.965579358, + 73.965579358, + 73.965579358, + 61.41064672899999, + 48.95025825355, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.597227067, + 16.86142088345, + 16.95276079085, + 31.04917794345, + 39.32514993065, + 65.361963559, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.7035501998, + 16.73312733725, + 30.8322173642, + 39.0472604349, + 65.1741034485, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.53462322765, + 38.97310648845, + 65.230709216, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.54921717395, + 38.8935430045, + 65.2480167455, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 29.92588499115, + 30.031432651, + 47.413589192799996, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.851854803, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.96810369299999, + 73.974135278, + 73.969446158, + 59.6782276295, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.5149274853, + 38.9054884566, + 65.152893856, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.58928989345, + 16.6712117219, + 29.014368063600003, + 38.9879468675, + 65.149562117, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.62608151605, + 29.021088645149998, + 39.10303874525, + 65.28393804650001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.0128575079, + 39.026534117900006, + 65.178799505, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.4750300706, + 38.809745577399994, + 65.197016767, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 28.0223609547, + 29.9175153636, + 47.40827822835, + 73.965579358, + 98.07451971399999, + 98.2979970045, + 99.784810022, + 106.800088075, + 109.18490448, + 105.790830107, + 103.4169707915, + 102.992785225, + 75.642756823, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 9.085517248899999, + 5.6591993994, + 29.74549684475, + 29.6814054141, + 56.703132699499996, + 60.994708945, + 85.008084238, + 84.48079325650001, + 84.26080761, + 84.1544003205, + 79.83234800550001, + 59.922803639, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.254090965150002, + 38.741919199950004, + 65.2686842935, + 98.1483184095, + 98.088164725, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.549023597, + 84.38970073899999, + 84.47456168800001, + 75.65605656999999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.8926355969, + 39.1859586324, + 65.5188762695, + 98.143165576, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.25666808849999, + 75.451234652, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.957832926650003, + 38.9207132366, + 65.317285544, + 98.097520554, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.84150755835, + 38.7268796795, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.6298624113, + 38.7182278429, + 65.17079464, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 26.22626591605, + 29.95655610885, + 47.540186799800004, + 73.9676873955, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 30.0456155229, + 29.7215369688, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 40.25139912755, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.2901045464, + 40.525427091400005, + 65.2632722925, + 98.0769185905, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 75.67873828249999, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.5568600344, + 40.697975590599995, + 65.378890203, + 98.1218256545, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 75.67873828249999, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.5281429471, + 40.67123797285, + 65.316404577, + 98.094495588, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 75.67873828249999, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.882804682599996, + 39.2413309782, + 65.5205912515, + 98.1212663485, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 75.67873828249999, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.874901270600006, + 39.2144245229, + 65.4506732905, + 98.0856400025, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 75.67873828249999, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.9812058788, + 30.2052614192, + 47.63853367615, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 66.821903494, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 30.0620452643, + 29.772577769199998, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 40.25139912755, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.716105598149994, + 39.0937862095, + 65.39172703, + 98.0816496265, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 75.67873828249999, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.85797168855, + 39.21343614665, + 65.508932277, + 98.1322463035, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.6939922987, + 39.106060531900006, + 65.5376964565, + 98.2354629665, + 98.28879297900001, + 98.3757997715, + 98.4060945505, + 98.2430134895, + 98.07451971399999, + 98.07451971399999, + 98.2617152675, + 98.359952571, + 74.2162483265, + 84.6214401975, + 75.83794524049999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.6161109316, + 16.80385561, + 16.900189342450002, + 17.0894780326, + 17.18735530235, + 34.500845624899995, + 39.6778908178, + 65.8190149585, + 98.303260816, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.108211023100004, + 39.19945496745, + 65.465470873, + 98.1024730355, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 84.244532906, + 75.4043754665, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 33.42202249885, + 30.3038349218, + 47.78403443285, + 74.00577666950001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 65.10874456900001, + 57.674028539999995, + 57.674028539999995, + 39.9776715248, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 30.26606783315, + 29.743317767649998, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 74.0091549725, + 74.1003288045, + 74.1015272545, + 56.2519097805, + 38.538240202800004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.81322979065, + 38.9283390146, + 65.2449435765, + 98.07451971399999, + 98.201276773, + 100.2474496705, + 101.652857185, + 101.97067619, + 102.00452934799999, + 101.888690317, + 101.719283735, + 99.64102364050001, + 74.60950773249999, + 84.3163050885, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.7714846699, + 38.93409074305, + 65.346225398, + 98.083388106, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.7719505527, + 38.9428514243, + 65.263488485, + 98.07451971399999, + 98.07451971399999, + 99.08005053000001, + 104.90299253299999, + 106.2951802945, + 106.111169697, + 105.7534371105, + 102.310797865, + 99.6286412275, + 74.528792058, + 84.2919453025, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.7459353924, + 38.89293327575, + 65.18833862049999, + 98.07451971399999, + 98.091547128, + 101.4212421215, + 105.301703399, + 106.438027196, + 106.906674753, + 107.089153173, + 106.55631514950001, + 104.5557858225, + 76.033840651, + 85.00755424649999, + 75.8078738905, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.738759888049998, + 38.695693064349996, + 65.1137508905, + 98.07451971399999, + 98.373480019, + 104.17638291050001, + 112.0000967885, + 115.9307951655, + 115.167594537, + 111.7266678255, + 108.3912424595, + 105.6894239765, + 76.37602321300001, + 84.797570387, + 75.569770888, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 31.196115925300003, + 29.83895122005, + 47.396433216750005, + 73.97834893, + 103.862532371, + 111.8843373035, + 114.848854532, + 114.33741903149999, + 115.4735995335, + 117.5176985225, + 115.899542938, + 110.600640419, + 68.16186093399999, + 58.0223442855, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 29.9703804, + 29.7410299124, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.22035429725, + 39.058624137, + 65.41002795499999, + 98.1000492985, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 82.5313739815, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.218769849050005, + 39.025893668749994, + 65.3598359285, + 98.0825393955, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 82.5313739815, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.1781430978, + 38.992153010150005, + 65.308225655, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 82.5313739815, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.15163269125, + 38.9766922229, + 65.3506875785, + 98.086511172, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 82.5313739815, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.3051944862, + 38.8963122588, + 65.2511521695, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 82.5313739815, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 29.59059362355, + 29.977751991999998, + 47.4956488567, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.1326844555, + 98.253096204, + 98.24533985299999, + 65.23754952300001, + 55.9967731575, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.73717154105, + 29.6814054141, + 57.400733757, + 63.555959166, + 85.3892346655, + 84.66240955800001, + 84.54998130899999, + 84.77077988100001, + 84.0992064685, + 60.752022205500005, + 39.2549343904, + 14.22499402305, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.006203894400002, + 38.6792463663, + 65.11742348749999, + 98.07451971399999, + 98.5719937105, + 100.615668165, + 100.564999469, + 100.515721814, + 100.5242584085, + 100.453209724, + 100.386047686, + 100.3160942505, + 74.82932031450001, + 82.86647974399999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.154258203, + 38.774642119949995, + 65.1661872405, + 98.07451971399999, + 98.07451971399999, + 98.769939488, + 100.97542737549999, + 99.794988612, + 99.81627336550001, + 99.8481498835, + 99.755589792, + 99.628686728, + 74.98569662099999, + 82.97013608450001, + 75.447970438, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.0859772802, + 38.74259781735, + 65.161837699, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.1829267285, + 108.31570781699999, + 113.132840591, + 122.20611606700001, + 126.77019099299999, + 97.8240336675, + 99.0090056835, + 85.966380652, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.8163008652, + 38.5473539508, + 65.10874456900001, + 99.6699328575, + 107.4967236595, + 112.8577478425, + 116.498263894, + 119.0662659385, + 117.9337545855, + 116.570822426, + 115.7777316775, + 112.69819825200001, + 84.1442926765, + 87.4325722595, + 76.11028948500001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.9844685124, + 38.64628622495, + 65.10874456900001, + 98.2896532875, + 105.214588052, + 112.7052671065, + 118.764563376, + 119.2667743785, + 116.571411585, + 113.6959118035, + 111.050585562, + 108.572857128, + 80.218289226, + 83.6385196615, + 75.7869844955, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 27.766196797950002, + 29.87146968385, + 47.4224870858, + 73.965579358, + 98.07451971399999, + 98.1910002095, + 98.449861798, + 98.44750059750001, + 98.4606926085, + 98.475484298, + 98.4592485795, + 98.44565389200001, + 65.4143694755, + 55.9864205155, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 9.085517248899999, + 5.6591993994, + 29.8536628029, + 29.683557641, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.9881702645, + 74.10245446249999, + 74.09985808350001, + 74.093550845, + 56.291121193, + 38.538240202800004, + 14.22499402305, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.37649750205, + 38.688605235850005, + 65.11368382549999, + 98.07451971399999, + 98.07451971399999, + 99.027266536, + 102.3699263665, + 103.486044883, + 103.670547322, + 104.3982462965, + 104.5091683105, + 104.547451092, + 78.333325131, + 81.56556923999999, + 75.782242934, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.362804532349998, + 38.706166010749996, + 65.12999856399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 80.81821505650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.43302460845, + 38.7792078132, + 65.180315173, + 98.07451971399999, + 98.07451971399999, + 98.07541311199999, + 98.0799822735, + 98.0800445175, + 98.0797548875, + 98.0794844955, + 98.085165414, + 98.089021464, + 73.972575285, + 80.8193637845, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.43945235235, + 38.7561919068, + 65.1409910565, + 98.07451971399999, + 98.07451971399999, + 98.147678406, + 98.91951918950001, + 99.83651969649999, + 99.82913775600001, + 99.81934135099999, + 99.7706321095, + 99.687567701, + 74.68196364500001, + 81.18023436249999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.31848686665, + 38.715952223799995, + 65.1726954815, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 80.81821505650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 27.8789508453, + 29.9587233498, + 47.55333931545, + 73.968611831, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 65.10874456900001, + 54.2477106905, + 57.696065312, + 40.08440521925, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 5.6591993994, + 30.291508921149997, + 29.97024752715, + 56.368615534499995, + 56.516424005, + 74.1090291735, + 74.0755285615, + 74.0581831785, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.549083287849996, + 12.51183509835, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 27.4327187321, + 39.289454041300004, + 65.59513661449999, + 98.4908639695, + 98.4325366325, + 98.411894961, + 98.37822704749999, + 98.15379797099999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 74.01529572449999, + 80.9966867315, + 75.61964372349999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 27.44881694895, + 39.253230050300004, + 65.543318723, + 98.22877416200001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 80.81821505650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.98001427705, + 38.92502733415, + 65.285341212, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 80.81821505650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.780440215149998, + 38.82899404465, + 65.2773053045, + 98.1017682725, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 80.81821505650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.806280874, + 38.8043976762, + 65.223398863, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 80.81821505650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 26.095837045350002, + 29.915427358400002, + 47.519684413149996, + 73.96741295599999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.0808050295, + 65.263463118, + 54.455333335999995, + 57.885566324500004, + 40.239202856300004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 5.6591993994, + 30.2745937995, + 29.962516198899998, + 56.344493272, + 56.267772427000004, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 10.7986761736, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.817335614250002, + 38.94321656265, + 65.4309433115, + 98.229232273, + 98.1532929725, + 98.1667552745, + 98.1322353925, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.9712563835, + 79.16829470949999, + 75.4893785995, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 25.285536312599998, + 38.93723850365, + 65.2867743205, + 98.07628759, + 98.07451971399999, + 98.07451971399999, + 98.07608173099999, + 99.3772359005, + 100.97224349950001, + 103.5654563195, + 104.4670398935, + 104.2443513445, + 76.805748665, + 79.3005070185, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 25.0526140179, + 38.7669257163, + 65.15906666699999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.889705605, + 100.34668015000001, + 100.2601201925, + 100.14560295, + 74.228437207, + 79.1220970255, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.966954213749997, + 38.7251824636, + 65.13824255850001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 79.105056132, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.914231115350002, + 38.718921743799996, + 65.160539479, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 79.105056132, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 24.346634564600002, + 29.88478424175, + 47.443859023899996, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 65.10874456900001, + 52.5345517655, + 57.674028539999995, + 39.9707962686, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 5.6591993994, + 29.94468893035, + 29.75160823545, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 10.7986761736, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 25.20772197395, + 38.9113722418, + 65.2838871885, + 98.0782257885, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 79.105056132, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 25.10291610475, + 38.7388799874, + 65.1471903975, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 79.105056132, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 25.04683534885, + 38.73972842015, + 65.13433865900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07762824950001, + 98.4125936195, + 99.45013972950001, + 99.4176533365, + 99.3670331575, + 75.178842675, + 79.105056132, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 25.0315557433, + 38.748044128349996, + 65.152582342, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 100.112942657, + 103.1146375065, + 103.8031531255, + 103.977460202, + 104.0422972345, + 103.789045147, + 77.059183299, + 79.53550376349999, + 75.3958640065, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.9284872994, + 38.669260672, + 65.109604998, + 98.07451971399999, + 98.07451971399999, + 98.914075521, + 104.0672690395, + 106.425246153, + 106.543297326, + 107.4108553025, + 107.2972392715, + 106.87976042849999, + 80.991220238, + 80.66153840999999, + 75.69344206950001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 24.2217299462, + 29.8109096282, + 47.4013739491, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.090171598, + 103.9802415205, + 108.915255669, + 109.82659624, + 109.775747387, + 109.492552462, + 72.3325014055, + 51.914299741499995, + 57.7921588245, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 29.75328453865, + 29.68226584285, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 74.0003858195, + 74.1052306435, + 74.10334893150001, + 56.360061197, + 38.538240202800004, + 9.085517248899999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.8947739529, + 38.69713367145, + 65.12364314300001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.8733779975, + 100.879678374, + 101.122568307, + 101.2416498085, + 101.3060311095, + 77.470243111, + 77.7773229635, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.84427306625, + 38.668243996950004, + 65.114800169, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.18095215950001, + 99.24662956, + 99.90963179799999, + 99.823073683, + 99.012067172, + 74.1656818915, + 77.3944474045, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.7906637734, + 38.58950744415, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.14365330999999, + 99.080680031, + 99.4961074835, + 99.4420439875, + 98.8686590675, + 74.13559627000001, + 77.399602915, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.82955535745, + 38.6512692668, + 65.11283657950001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.86233753100001, + 99.1306435645, + 99.0856345875, + 73.977917282, + 77.391897207, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.90641325095, + 38.6996055478, + 65.1374590735, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.080119521, + 98.08777506950001, + 98.0798573645, + 73.965579358, + 77.391897207, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 24.450311084400003, + 29.9549299947, + 47.5421516201, + 73.972313067, + 98.13752248200001, + 98.09615560099999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 65.10874456900001, + 50.821392841, + 57.6776660885, + 40.0692348465, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 30.078942502, + 29.8210970983, + 56.25805029, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 9.085517248899999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 25.228991535, + 38.86566018155, + 65.2204601305, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 77.391897207, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 25.12755620965, + 38.792096295250005, + 65.1724004675, + 98.07451971399999, + 98.07451971399999, + 98.1167133315, + 99.5227166835, + 102.274793634, + 103.795954722, + 104.020673047, + 104.01104692, + 103.83659178100001, + 79.3118353685, + 78.4945888445, + 75.4054076095, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.851134248599998, + 38.6359764814, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.8409518985, + 102.92317837899999, + 104.9665383385, + 105.0344405235, + 105.09294939850001, + 105.0405470085, + 104.912416991, + 79.763824145, + 78.2358219175, + 75.4658001665, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.852472208800002, + 38.644191366049995, + 65.11371642499999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.53808654449999, + 101.01519648349999, + 100.942488137, + 75.508907719, + 77.47043376650001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.87518614545, + 38.6542926558, + 65.1111213185, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 77.391897207, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 24.4149338129, + 29.914297248700002, + 47.5028781782, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 65.10874456900001, + 49.108233916299994, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 29.903051375700002, + 29.72227263575, + 56.2519097805, + 56.2519097805, + 74.19253706399999, + 82.845769811, + 81.835713992, + 77.8156359045, + 77.747443099, + 56.9263559865, + 38.5730271334, + 7.37235832415, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 5.6591993994, + 29.683176006449997, + 29.73626586175, + 65.1229896185, + 66.6685203965, + 82.36290091949999, + 83.1155406765, + 84.16493020099999, + 84.30767627300001, + 84.1319761355, + 64.785758479, + 43.45933083715, + 7.37235832415, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.6824197736, + 38.538240202800004, + 65.10874456900001, + 98.397495229, + 104.96030631800001, + 116.49667624850001, + 125.3485198615, + 129.614585667, + 129.953774143, + 126.553789557, + 122.74303519050001, + 119.86900378450001, + 91.640410461, + 89.40377736500001, + 84.365770715, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.6375970172, + 38.538240202800004, + 65.3847079805, + 112.5923159425, + 116.96089152500001, + 119.9564857645, + 121.365255677, + 122.24165235449999, + 122.584946199, + 122.07127696849999, + 121.0927655665, + 118.8165402705, + 90.918069609, + 88.428238129, + 83.41055026549999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 99.5095982765, + 104.3736861725, + 108.076021092, + 111.3853889095, + 112.1137675825, + 112.22484593749999, + 111.9173828525, + 110.99680464299999, + 84.025984727, + 80.38118779050001, + 75.931102849, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.7645456989, + 38.5634999197, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.0820714715, + 98.083569401, + 98.08259700949999, + 73.96714483550001, + 75.67873828249999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 24.45118104355, + 29.9022597602, + 47.42719078335, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 65.10874456900001, + 49.108233916299994, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 5.6591993994, + 29.80440449725, + 29.68674720725, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 7.37235832415, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.8659175196, + 38.67046969345, + 65.127930502, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 75.67873828249999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.8864004115, + 38.686263518400004, + 65.14611579849999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 75.67873828249999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.9972268198, + 38.7320919908, + 65.1614498665, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.0926665205, + 98.1946939165, + 98.5276904565, + 98.5231179035, + 98.5090164935, + 74.035529445, + 75.67873828249999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.85323078675, + 38.658859346099995, + 65.1187689915, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.512523658, + 100.5101799765, + 102.0370543145, + 102.77261493900001, + 102.731653974, + 102.6019243785, + 78.15250407250001, + 76.2132925665, + 75.4087759195, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.89647456545, + 38.6915495788, + 65.200374519, + 98.0831517495, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 73.965579358, + 75.67873828249999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 24.239757506049997, + 29.78970546825, + 47.40652278225, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.89913478300001, + 99.4453678495, + 99.4294224155, + 99.3984300045, + 65.10874456900001, + 49.108233916299994, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 5.6591993994, + 29.820554654250003, + 29.70076587055, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 7.37235832415, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.8207545339, + 38.63005241515, + 65.11143349199999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.0778579005, + 98.09465853750001, + 98.83328328350001, + 99.52713584150001, + 99.491815469, + 99.4463035005, + 74.10341802399999, + 75.6804045845, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.792715698, + 38.603152672600004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.074818134, + 98.075119262, + 98.8299726865, + 100.42173804849999, + 100.745459254, + 100.6691254005, + 75.0889036435, + 75.71202608349999, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.74819905295, + 38.55819528305, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.134949078, + 99.64461114150001, + 100.3980517225, + 101.4717044665, + 102.531204725, + 102.3231662175, + 76.570849369, + 74.2843985495, + 75.42635133350001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.78069449965, + 38.606508981850006, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.076195074, + 98.08343097599999, + 98.0873794715, + 98.0892656035, + 98.07966069899999, + 73.965579358, + 73.965579358, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.7705314446, + 38.57539444365, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.4018580045, + 100.097002415, + 101.4511615765, + 102.7237103545, + 102.899126854, + 102.8101124705, + 78.489795441, + 76.679797253, + 75.5173695845, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 24.0605712116, + 29.68233069455, + 47.395074991550004, + 73.965579358, + 98.106865837, + 101.0841984865, + 105.4311787465, + 109.37987640200001, + 110.2025223805, + 110.106283297, + 110.044432453, + 109.53034122349999, + 72.624522877, + 48.94768786115, + 57.815790512499994, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 74.85557142350001, + 76.6486767185, + 78.345169948, + 79.9282565995, + 79.80276618949999, + 57.219078826, + 38.5755843719, + 5.6591993994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.75890243015, + 38.5649196881, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.053949092, + 100.0896494125, + 100.100518945, + 100.08420307, + 100.006099403, + 99.9082008415, + 74.258121996, + 74.15843695400001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.8153002288, + 38.5886831524, + 65.10874456900001, + 98.07451971399999, + 98.41094017649999, + 100.2762974655, + 100.823632952, + 104.59253954900001, + 106.2927868725, + 106.3431369085, + 106.1106743875, + 105.803979812, + 81.09481135050001, + 76.7224674645, + 75.681720489, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.7754382715, + 38.584280781000004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.32927582500001, + 101.412953309, + 104.046529235, + 104.87941281399999, + 104.8025715605, + 104.55395604, + 104.31471953350001, + 79.90974368750001, + 75.854134407, + 75.5403782275, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.776891838850002, + 38.57577934975, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 99.76304260350001, + 104.1914032345, + 104.620663188, + 106.0353637435, + 106.9046354225, + 106.6606356725, + 106.18468420549999, + 80.417686175, + 75.2866987745, + 75.5918085615, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.082401304, + 99.9826064155, + 104.6105425425, + 108.576571031, + 110.6723112655, + 111.6136799375, + 111.00487138449999, + 110.4935074435, + 84.0979102665, + 79.174549377, + 75.982940578, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 24.02220601465, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.5383789395, + 110.05741349200001, + 113.999216965, + 112.945096764, + 113.6094108915, + 114.5508630115, + 115.1980758365, + 114.4591934755, + 74.4598567975, + 49.1681128706, + 57.885195619, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 74.222457191, + 75.764132757, + 76.754648411, + 77.13613397350001, + 58.0670750005, + 38.71395976395, + 5.6591993994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.69545890765, + 38.5423859129, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.20278293749999, + 101.795334063, + 105.32650555000001, + 108.58004845800001, + 110.22819047200001, + 109.88940262850001, + 109.107339407, + 81.06871252799999, + 75.45764926449999, + 75.6639719495, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.7137012254, + 38.54808332525, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.261936882, + 103.438012876, + 106.6967666275, + 106.704439707, + 106.6051608935, + 106.4444750685, + 106.1870353095, + 80.029689635, + 74.575228202, + 75.503541145, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.7230965683, + 38.547733760949995, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.720249965, + 101.6266385345, + 105.0192813255, + 106.760430069, + 106.75185155950001, + 106.50619822350001, + 106.00392403250001, + 79.6834926185, + 74.8924384465, + 75.6280727015, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.787441059549998, + 38.55787165145, + 65.10874456900001, + 103.7157358635, + 111.682885724, + 116.451847537, + 119.7736773035, + 123.095066333, + 123.9530531285, + 122.98167910400001, + 121.066390728, + 118.97358759149999, + 90.774184351, + 86.7968559105, + 84.3044116275, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 13.12722610085, + 24.6375970172, + 38.538240202800004, + 65.12533963050001, + 103.92540889, + 108.63106910350001, + 111.78134960150001, + 114.5461656415, + 117.518939681, + 121.02665636100001, + 123.086457624, + 122.09142962950001, + 119.262618886, + 91.39474238049999, + 85.6809844815, + 82.8344959165, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 24.06052878525, + 29.6814054141, + 47.4059474023, + 79.506458408, + 111.4865675845, + 117.504894015, + 120.628722164, + 122.9542612945, + 123.73241124399999, + 124.38306695449998, + 124.08092479100002, + 121.4045366745, + 80.72656943999999, + 56.173797231, + 60.1531474245, + 40.03491110115, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 5.6591993994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.7316903037, + 38.5572363358, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.95304300549999, + 100.185989259, + 102.7322960095, + 103.9166169545, + 103.75106256800001, + 79.3955935405, + 79.045433323, + 77.1817460745, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.70121379215, + 38.543739571699994, + 65.10874456900001, + 98.07451971399999, + 101.3297835505, + 107.643005673, + 109.557296244, + 111.8548867815, + 113.6831708885, + 115.493852257, + 115.3395148735, + 114.413616875, + 87.420537263, + 82.8293598205, + 80.09490923, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 38.538240202800004, + 5.6591993994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.25556493799999, + 102.186426812, + 103.80815078350001, + 105.1826787485, + 105.1337966835, + 104.87968713149999, + 80.369826734, + 78.255194963, + 75.93032973, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.5178998955, + 100.5654403185, + 101.878097063, + 102.1018928885, + 102.0284399045, + 77.736246946, + 77.517235601, + 76.101244107, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 24.02220601465, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 101.618013412, + 110.721838854, + 116.811012113, + 117.714143703, + 117.158843518, + 116.258792849, + 76.4997686185, + 52.364946419, + 58.196102125500005, + 39.9884951618, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 75.504904454, + 77.589416531, + 82.70792497549999, + 87.89210913149999, + 88.64036956250001, + 69.7666886955, + 46.3452811303, + 5.6591993994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 66.25850553949999, + 113.9664126375, + 116.60045235, + 119.222204867, + 122.27633471300001, + 124.98375129349999, + 127.10502372650001, + 128.2145070425, + 126.33112191000001, + 123.362827512, + 94.19283686499999, + 88.481377155, + 85.6051942655, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 67.5720217275, + 112.88740766049999, + 119.73307786299999, + 125.1605309725, + 126.88683649699999, + 128.465518775, + 129.753566726, + 132.539087309, + 132.7933116995, + 130.21257019, + 101.069942099, + 94.533325387, + 89.903605437, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 67.14189700850001, + 115.8475416185, + 121.5966780915, + 126.05077643349999, + 127.1936540325, + 127.9809748335, + 128.313472323, + 128.1323022605, + 125.89580284949999, + 122.63381176399999, + 94.37587022849999, + 89.176380588, + 85.6415131485, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 105.61954479350001, + 116.2351462065, + 123.132957826, + 126.08916098700001, + 128.04073215900002, + 129.11147055400002, + 127.80120262349999, + 125.12898736250001, + 121.51650659500001, + 93.102217782, + 87.4112549905, + 83.9196726105, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.201426382, + 100.870341126, + 108.043829247, + 113.5026115145, + 115.12666378450001, + 116.0927701075, + 116.4660672955, + 115.8913312225, + 114.8027409455, + 87.7260825285, + 83.022551131, + 78.749471527, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 24.02220601465, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.5056369545, + 104.19129238000001, + 111.0012901955, + 114.49317870899999, + 115.0637801795, + 115.446988641, + 115.278668438, + 114.824216816, + 77.27180797349999, + 54.08669639, + 58.962694774, + 39.994794390050004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 76.55055500499999, + 83.374017944, + 86.0951400615, + 87.6333574, + 87.85322121050001, + 65.872858506, + 42.5150894995, + 5.6591993994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 101.4725988615, + 106.991464841, + 111.183200587, + 113.600433052, + 115.46105588799999, + 114.6603609405, + 113.65976679900001, + 87.13302628950001, + 82.9784575945, + 79.9817974445, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 101.94198757849999, + 108.08649049499999, + 111.01771509849999, + 113.4245191075, + 115.2850335515, + 116.871717136, + 117.3675787595, + 116.828378692, + 89.2361396215, + 84.76491918650001, + 82.8880651015, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 100.9106653035, + 104.5776415355, + 105.313776128, + 105.8696295075, + 106.5448472575, + 106.4326949015, + 82.183966732, + 82.6350867725, + 78.2156423135, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 14.8403850256, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 100.120916935, + 105.1020621255, + 110.47345848100001, + 114.6150542015, + 116.325376807, + 116.265228491, + 115.5894763065, + 89.7562652895, + 87.68802828199999, + 83.714769661, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 99.5115198155, + 112.6334760985, + 121.72919103999999, + 124.9300380135, + 126.9959070095, + 127.92117094650001, + 128.82387967600002, + 126.441997756, + 123.35968583500001, + 93.99950367, + 89.61292562199999, + 85.34481716949999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 24.02220601465, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 103.318218385, + 113.92446185, + 118.9979349315, + 119.981733561, + 119.386244338, + 120.9652789635, + 121.179158092, + 118.904459311, + 79.020840908, + 57.763379549999996, + 61.109216667000005, + 40.094215501949996, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.446257946, + 58.971698352000004, + 83.861142602, + 86.41105387, + 86.6316176695, + 87.297133896, + 87.755024288, + 68.0561881215, + 44.829206153550004, + 7.37235832415, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 99.023954783, + 107.24564836, + 116.6032921625, + 121.3146564005, + 126.579338362, + 128.05321914450002, + 130.955755945, + 127.47155814850001, + 122.86419291850001, + 93.36085458849999, + 90.2077427515, + 85.806711276, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 107.893866117, + 118.49912048300001, + 124.45149363499999, + 126.46268787000001, + 127.58199420000001, + 128.69650144550002, + 131.8867148815, + 127.8163467635, + 122.1986416155, + 92.183294403, + 89.60867378900001, + 85.746205502, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.653546179, + 107.8834950575, + 112.179288825, + 115.994705307, + 118.6048207705, + 119.3606442375, + 119.490863164, + 119.3089969275, + 92.77170004300001, + 89.674168763, + 86.079882211, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.986541179, + 107.53341614050001, + 117.471673317, + 120.34857082250001, + 122.805129522, + 123.9309337275, + 123.40454924250001, + 123.23810907849999, + 121.35133927300001, + 92.6561785755, + 89.83503450299999, + 85.569152804, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.0380453975, + 109.4366592035, + 114.950201349, + 117.17236067200001, + 118.0798728485, + 118.3455187475, + 117.9996749235, + 116.951060973, + 89.018108679, + 86.366662973, + 83.38154724549999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 24.02220601465, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 99.8276717555, + 103.42660473849999, + 105.55044811949999, + 107.745210726, + 109.61132424399999, + 111.0611508775, + 111.92823737900001, + 111.902971008, + 76.5155853495, + 57.8136844635, + 65.0567171165, + 42.652120590100004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 5.6591993994, + 29.6814054141, + 31.1959892523, + 70.2222167945, + 76.145575342, + 95.653250567, + 95.980896753, + 96.4818178135, + 96.769719349, + 97.24385985800001, + 75.3338623545, + 51.193795514, + 7.37235832415, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 98.3031800985, + 106.639465333, + 116.051234573, + 121.070413399, + 124.09400025949999, + 125.19334263049998, + 126.324991789, + 124.76082179, + 121.6738489145, + 92.383358554, + 89.3735286855, + 85.420714166, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 99.05172583950001, + 103.836835108, + 111.611364969, + 117.44211554600001, + 121.449534881, + 124.1227695555, + 125.5374492625, + 124.69232166399999, + 122.257759452, + 93.18103004800001, + 89.290489911, + 84.97104042, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.1176375405, + 109.432100984, + 116.247222982, + 121.290821417, + 122.4213780935, + 122.74149551250001, + 124.00556954750002, + 124.255730952, + 122.85513109549998, + 119.4598299535, + 90.138168762, + 87.64367733600001, + 83.3689030555, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 24.6375970172, + 38.538240202800004, + 65.10874456900001, + 103.2313650195, + 114.884795205, + 119.9328321605, + 121.5725895435, + 123.6795043395, + 123.21239297650001, + 121.8436397855, + 120.479436604, + 118.86940033149999, + 90.98702227700001, + 87.965002201, + 83.58054681, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 65.10874456900001, + 100.2187111925, + 107.090884335, + 112.136661086, + 115.4704543155, + 118.110046928, + 120.007652036, + 120.9207385935, + 119.1136676825, + 115.0892407425, + 85.60316526199999, + 84.0992452295, + 76.8332797755, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 25.7353649394, + 29.6814054141, + 47.395074991550004, + 73.9890170895, + 102.7344778735, + 109.248836945, + 113.614591069, + 116.12307936900001, + 116.955275152, + 116.93424824, + 116.97998387800001, + 115.88804820850001, + 76.06602664399999, + 55.0790248525, + 58.154085583000004, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.96681780200001, + 73.9728508735, + 73.9730341585, + 56.2519097805, + 38.538240202800004, + 9.085517248899999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.4696311204, + 38.57932254595, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.721630836, + 102.526891061, + 103.6413103965, + 103.921278915, + 103.94982162250001, + 103.6691431645, + 78.923162366, + 78.142360143, + 75.4938787635, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 65.10874456900001, + 106.5723235695, + 115.2429457885, + 121.3582935535, + 125.866542173, + 131.22838105600002, + 133.24959318350002, + 130.582288352, + 127.9746124005, + 125.721379226, + 97.300466358, + 96.0656522835, + 90.522113618, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 71.3876887365, + 122.0887274855, + 132.071247459, + 136.92776590449998, + 139.410629428, + 142.622872992, + 142.053435507, + 142.32849072099998, + 140.685513718, + 138.16884658950002, + 103.554567416, + 96.76132381000001, + 89.2872536695, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 74.247374478, + 123.81926745850001, + 127.0710472215, + 131.149196566, + 135.7862619045, + 138.2547452125, + 137.42002567650002, + 136.142020751, + 133.3719645715, + 128.4678150815, + 96.46473808799999, + 92.356682155, + 84.9595881415, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.2771266265, + 106.1926863065, + 109.237663123, + 111.495734559, + 112.9736252505, + 114.250065635, + 113.563866396, + 112.454392478, + 84.3534760835, + 82.84795954149999, + 76.7604849405, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 25.7353649394, + 29.6814054141, + 47.395074991550004, + 76.169729102, + 113.8194971735, + 121.9799879135, + 126.14345248250001, + 126.79732045349999, + 127.49644674099999, + 128.548936973, + 128.791614553, + 125.07050179400001, + 82.820631307, + 62.227269676999995, + 65.3153965275, + 41.579828543750004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 5.6591993994, + 30.36398131, + 38.56418102205, + 73.9699234825, + 76.711921145, + 97.2469863105, + 100.10779217800001, + 101.22941686349999, + 101.6841044265, + 102.153468472, + 77.562633183, + 52.2287982705, + 9.085517248899999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 67.54016762149999, + 115.398776982, + 122.450691236, + 127.067907426, + 130.3484219875, + 133.1675330145, + 133.7062781305, + 133.541069472, + 133.31985868299998, + 129.4667516495, + 98.081461809, + 96.281248806, + 88.446160667, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 66.3219265005, + 114.7456955005, + 121.307273055, + 127.749166759, + 131.99589525000002, + 134.0806961015, + 135.47079019650002, + 133.7065439435, + 128.8708658365, + 123.45612662100001, + 91.247185622, + 90.1801516615, + 82.72555009, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 65.8373695355, + 113.4342761735, + 119.6346558845, + 124.198484434, + 129.35077188949998, + 132.427889655, + 131.779884274, + 132.139186905, + 132.1066007105, + 129.11768543, + 99.075366267, + 98.3243006485, + 90.2452048965, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 26.350755941899997, + 38.538240202800004, + 66.98641178049999, + 113.8217701975, + 123.371187247, + 130.26919241849998, + 133.48686673350002, + 134.800083951, + 134.4857784165, + 134.2116456585, + 133.48389684199998, + 130.374245503, + 101.52964967449999, + 101.266937552, + 92.6670747485, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 66.6948833245, + 113.9870235475, + 121.6563049815, + 127.66573506649999, + 130.458446297, + 132.0456916665, + 132.660691222, + 134.20503489549998, + 130.6689188025, + 127.59405203150001, + 97.809020734, + 96.35648711450001, + 88.298672244, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 27.448523864149998, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.37961037800001, + 102.317561669, + 106.7069568515, + 109.43224908250001, + 110.5782993285, + 111.8254381835, + 112.041561828, + 110.93159926599999, + 72.53722045350001, + 54.0409914675, + 58.010326595, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 9.085517248899999, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 75.766344463, + 81.815189358, + 85.4450540325, + 86.235628731, + 85.909987848, + 63.015582513, + 39.1202787809, + 10.7986761736, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 99.57856702999999, + 108.386163217, + 114.17124043199999, + 114.8909977485, + 114.553968361, + 114.0865432885, + 111.8444075145, + 81.9259805715, + 82.106420631, + 76.01770572999999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 99.2244075455, + 103.2117403445, + 106.0345290405, + 110.1784575845, + 115.334009148, + 119.0254823785, + 117.9757162655, + 115.564619644, + 86.3782827425, + 87.0018835415, + 79.0875121685, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.906005388, + 104.7329590905, + 109.958110158, + 113.9721320375, + 117.550376593, + 120.8326032585, + 119.751085561, + 117.456939199, + 89.1187140585, + 92.0643412465, + 82.5418780255, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 98.856603051, + 105.904731116, + 112.5855224035, + 118.44904191750001, + 122.6140481425, + 122.31109569849998, + 121.66412383, + 120.6590813885, + 118.7614537405, + 89.937196151, + 92.26270043400001, + 84.141360355, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.11752844600001, + 108.36792885450001, + 115.513324659, + 122.6092998965, + 126.564580465, + 129.29565638, + 131.42179670299998, + 129.7605092885, + 125.015168193, + 120.5658893605, + 91.94805057699999, + 94.279485059, + 85.588974831, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 27.448523864149998, + 29.6814054141, + 47.395074991550004, + 78.436067533, + 115.1087757225, + 123.52458085, + 125.94829589100001, + 127.2252509255, + 127.0845925815, + 126.623012566, + 126.36474425399999, + 122.54231222349999, + 80.9461534815, + 63.917273131500004, + 64.197416722, + 41.45744072305, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 9.085517248899999, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 62.082105059, + 67.51015071100001, + 88.367257158, + 89.818122027, + 90.1951613725, + 89.99398933650001, + 89.7591444715, + 68.68988172, + 46.58827514235, + 12.51183509835, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.13061326149999, + 109.862147961, + 118.22139845299999, + 123.62562890999999, + 127.10728094899999, + 130.0743697135, + 129.323873212, + 128.371153034, + 125.740587304, + 122.25569754649999, + 92.9527644205, + 94.160716957, + 84.7064194075, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 99.6367862175, + 107.333958589, + 113.915549052, + 117.2764752375, + 119.65772892, + 120.182429729, + 119.95241448450001, + 118.9179383785, + 117.6908526795, + 90.238035454, + 92.23871880099999, + 82.7468352855, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.605584376, + 106.889535117, + 110.05855841099999, + 112.30064140549999, + 115.370264698, + 117.899387194, + 117.81953024250001, + 116.900405533, + 89.095411941, + 90.695407268, + 81.948850938, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 98.19100942249999, + 103.0133978325, + 113.152031802, + 119.9852859475, + 122.857026547, + 123.150543429, + 122.66299794400001, + 121.574039939, + 119.29303115500001, + 91.6366685375, + 95.3755300295, + 84.6277742065, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.06391486665, + 38.538240202800004, + 65.10874456900001, + 101.9675730595, + 109.98929742600001, + 115.5836649755, + 118.733202857, + 121.23577631799999, + 121.7396387005, + 121.181777618, + 120.110977838, + 118.5940835635, + 90.027676251, + 91.4106896205, + 78.0069089645, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 29.16168278885, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 102.673983619, + 110.471298396, + 115.611588259, + 121.0367787095, + 122.54923143449999, + 121.71594524950001, + 119.0544865785, + 76.4636212705, + 60.116647734, + 58.8665490725, + 40.26749078425, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.889338365, + 84.24261981699999, + 90.415524385, + 91.592144136, + 91.478047438, + 91.0225783585, + 69.229476718, + 45.418252755400005, + 14.22499402305, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 76.3456176375, + 79.39554425, + 80.4498357515, + 80.481483693, + 80.64585825850001, + 61.89573148149999, + 39.31701452855, + 14.22499402305, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.81437693150001, + 102.885747443, + 109.8649656105, + 113.0887828745, + 112.74937714149999, + 112.237909665, + 111.5738845745, + 84.8844686675, + 88.87583794150001, + 76.873737659, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.03575540050001, + 108.39849860199999, + 112.281142535, + 116.75491578750001, + 119.6787577795, + 120.7570521335, + 120.290778801, + 118.676176481, + 89.874692803, + 94.0731507685, + 83.913367307, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 100.17787604450001, + 108.155114574, + 118.30860883749999, + 122.98947928199999, + 124.84939894050001, + 127.7366576185, + 127.00572252399999, + 124.87344863199999, + 122.19279302049999, + 93.96505543449999, + 98.63537804, + 88.814470721, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.674524028, + 111.987675254, + 120.57868615, + 125.2618316465, + 127.4239487865, + 130.292708685, + 132.097617496, + 131.818983883, + 129.100727693, + 126.481037137, + 98.407044027, + 103.4635876845, + 91.09182340650001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 29.16168278885, + 29.6814054141, + 47.4271306465, + 85.70074720400001, + 122.47165682949999, + 128.528834685, + 131.2197374425, + 132.9692197425, + 133.1125947505, + 131.414336281, + 129.0741575905, + 126.427112199, + 85.501031224, + 72.47120231400001, + 70.172984917, + 49.02421880125, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.8000756819, + 34.8927002704, + 72.611094722, + 80.6513947765, + 103.289428459, + 104.70219727850001, + 105.9916498075, + 104.63350029499999, + 100.9241559485, + 77.138163046, + 51.259615565, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.12949768349999, + 103.602417758, + 116.977713846, + 125.1737457485, + 126.3787931205, + 126.5913899655, + 126.83443130599998, + 126.9948845045, + 125.9342002915, + 122.409262843, + 91.70135293649999, + 97.69930817400001, + 86.6607349425, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 98.3353901425, + 104.29916233649999, + 112.4661890095, + 118.7502110075, + 122.37251334749999, + 122.7405379585, + 122.51466001, + 122.05720197650001, + 120.25705749950001, + 91.464034618, + 97.427400197, + 85.28327483, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 98.2402697995, + 103.760053735, + 110.2963628295, + 113.66177193200001, + 117.860636082, + 120.711001608, + 121.6164029345, + 120.0242237705, + 117.61488771799999, + 89.4122769105, + 95.068366515, + 82.957419254, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.08368684649999, + 107.07448441849999, + 118.2947400365, + 121.0921825975, + 120.8604309395, + 120.324947096, + 118.73837945300001, + 115.523419757, + 86.02759267, + 92.449727091, + 81.7814465665, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.7770737914, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.3085080815, + 105.0498611235, + 106.0040671745, + 106.2633652995, + 108.461701103, + 111.170834075, + 111.4494493735, + 110.99123266250001, + 87.337805284, + 92.7442369645, + 81.67948687399999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 30.8748417136, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 100.4899264755, + 102.3885382305, + 103.8793966855, + 105.0133224755, + 105.706020821, + 105.98938291900001, + 105.7153490525, + 73.7012156405, + 60.773016832, + 58.232003237, + 40.0224152093, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.3407477605, + 59.8842330465, + 85.750733547, + 90.749212168, + 92.4478954895, + 92.0778205405, + 91.34529307449999, + 67.0956586485, + 43.989680971300004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.4417517665, + 101.433344251, + 103.293053358, + 104.3395855575, + 104.9478102315, + 105.17568604200001, + 105.0411836035, + 104.7001126995, + 81.8535370255, + 88.205350127, + 76.0812051465, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.161216741, + 104.364944366, + 106.5795893465, + 106.88416776250001, + 106.91142031349999, + 106.4370014675, + 83.420194737, + 90.0165888475, + 76.99913604, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.65333608249999, + 100.65338018300001, + 101.6642717885, + 79.01360297800001, + 84.909655769, + 75.589296096, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.51308030505, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.9688980295, + 102.8978323435, + 106.7992565725, + 108.454879836, + 108.3821776755, + 108.163024193, + 107.815511746, + 83.584206422, + 88.3846397125, + 76.3181158365, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.5124873536, + 38.539349318599996, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 101.7498815105, + 108.648036598, + 111.213286364, + 112.1256796965, + 112.7166581935, + 112.674368955, + 111.8717032505, + 88.5117007625, + 92.0845037375, + 80.4088884315, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 30.8748417136, + 29.6814054141, + 47.395074991550004, + 75.2649137875, + 107.3932898065, + 113.7945858305, + 119.7635813935, + 124.072912955, + 125.83143184849999, + 126.2122625855, + 126.30010857, + 124.55788775500001, + 85.884937374, + 69.071637622, + 66.982088232, + 44.4674172341, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 29.6814054141, + 33.28942496655, + 71.4957440305, + 80.80544304600001, + 103.8157113205, + 105.36430963449999, + 109.39321398099999, + 109.4800497465, + 106.983455167, + 87.2995808935, + 60.6528994765, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 71.9332691705, + 120.8094180645, + 132.9664008125, + 146.203294003, + 147.717146898, + 145.59639971, + 144.4243066245, + 142.9487424115, + 138.5979092695, + 132.0842858925, + 102.80020925950001, + 104.034351947, + 92.82058767299999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 69.9428097015, + 118.32088898849999, + 124.68071240949999, + 130.5558583, + 137.840360547, + 141.634247394, + 140.16330398250003, + 140.7628223765, + 138.4682046495, + 132.068981162, + 102.972615645, + 104.59124087549999, + 93.0215079655, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 99.08172198999999, + 107.260388683, + 110.3853176505, + 113.4127918655, + 115.1220025705, + 114.95469577, + 114.83463748749999, + 113.0853786165, + 87.8854181805, + 90.7250819175, + 77.7230966945, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 99.4774881175, + 107.90113246050001, + 111.0100125735, + 112.2820615955, + 112.769312282, + 112.5376962915, + 111.680404839, + 110.31270848599999, + 86.6039631085, + 89.0466937685, + 77.00158151149999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.490232716099996, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 101.5858477965, + 108.93356579099999, + 111.69835389049999, + 111.6400775225, + 111.15979853500001, + 110.53012298899999, + 109.32014108450001, + 87.15185121399999, + 89.688925755, + 77.1470954915, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 30.8748417136, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 98.07627902700001, + 98.5203447675, + 103.169908323, + 106.4844207555, + 107.057415113, + 107.0726347855, + 106.717227869, + 75.2748662915, + 58.048795147, + 57.678972763, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 43.677716977, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.317834952549994, + 38.60986842215, + 65.10874456900001, + 98.07451971399999, + 98.2756480205, + 105.64818258400001, + 113.4045963425, + 118.968107528, + 120.5051291775, + 118.89694757250001, + 115.8769664725, + 111.9204984115, + 87.6578171245, + 88.2756031645, + 77.116710347, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.20339164085, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.587893488, + 99.76155224099999, + 99.742544402, + 99.7269171415, + 99.69121335450001, + 99.6163679055, + 79.9047064655, + 84.80182819, + 75.73267536899999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.28842612165, + 38.563827944450004, + 65.10874456900001, + 98.07451971399999, + 98.4225620295, + 101.84403212449999, + 105.23273336449999, + 106.581141648, + 106.539771922, + 106.3634201005, + 106.0788290785, + 105.6450766145, + 85.6007852805, + 86.68451684099999, + 76.8111276775, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.22595363695, + 38.538240202800004, + 65.10874456900001, + 98.14113543149999, + 100.062445013, + 103.684661201, + 108.3957736735, + 113.071327669, + 114.1809330075, + 114.50312645400001, + 114.2914210065, + 113.308300533, + 90.0602935325, + 92.646320436, + 81.3034714495, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.20339164085, + 38.538240202800004, + 65.10874456900001, + 98.122176423, + 104.693958136, + 118.3415753405, + 124.51861545549998, + 127.69490661500001, + 128.584986007, + 128.7082483155, + 124.96449559499999, + 120.359357292, + 96.180701039, + 96.42436836, + 83.3892767895, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 32.5880006383, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.1463024995, + 102.975210537, + 109.645027681, + 111.9256397235, + 112.6867586035, + 112.906296969, + 112.4320562375, + 111.2570252835, + 78.6826977905, + 59.4786736425, + 58.856741631, + 40.301874889649994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.35323879, + 57.7934305735, + 79.551844334, + 84.1628611115, + 85.9898689635, + 85.86117768, + 84.9660849725, + 58.9598195985, + 46.2952778798, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.5811656805, + 64.158386039, + 87.167870373, + 85.77726758700001, + 85.3855967865, + 83.85385174199999, + 81.3200343075, + 57.2264675245, + 45.428970493, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.20339164085, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 100.0232510585, + 105.485516767, + 105.682720907, + 106.05320904, + 106.3602618455, + 106.4139475305, + 106.1287541095, + 105.55732267699999, + 86.0969415985, + 86.165059513, + 76.9991233835, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.20339164085, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 102.60921857550001, + 110.242627435, + 110.505562777, + 110.3120919425, + 109.841197842, + 109.44171329299999, + 107.87133610000001, + 86.6224003025, + 85.82817456000001, + 76.320052198, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.20339164085, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.1890238995, + 100.4497371575, + 104.36036835350001, + 106.612731484, + 107.4061630365, + 107.451435266, + 107.0255132885, + 106.32271184599999, + 87.70022007600001, + 86.6703191095, + 77.0578127795, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.20339164085, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 98.0932070875, + 98.4033228105, + 99.074653987, + 99.7054453, + 100.3591048105, + 100.5977391295, + 100.4801098055, + 100.4086937145, + 82.4373610505, + 85.5600533555, + 76.188347326, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.30115956305, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.39575103, + 103.65136891649999, + 104.092327611, + 103.85066553450001, + 103.47076023700001, + 74.3486505725, + 57.748172564499995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 56.2519097805, + 47.104034826450004, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.9756236281, + 38.56845149395, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.69473809, + 99.64447395350001, + 101.1543848765, + 101.8483421045, + 101.7392112935, + 101.5518514335, + 84.042443856, + 85.04247323300001, + 75.9487331765, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.0617921265, + 38.56304220155, + 65.10874456900001, + 98.07451971399999, + 98.18639672500001, + 100.0589990475, + 103.2492710515, + 105.5443317925, + 107.06967347150001, + 107.69842768400001, + 107.4206667935, + 106.67846589, + 87.831788884, + 86.2821496095, + 77.00482243750001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.916550565600005, + 38.538240202800004, + 65.10874456900001, + 98.07451971399999, + 99.1086918125, + 100.6391071065, + 100.694902629, + 105.302254535, + 110.312377565, + 110.2307696405, + 108.7051267415, + 106.082051238, + 85.4662918885, + 85.9730330975, + 76.6641208635, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.916550565600005, + 38.538240202800004, + 65.10874456900001, + 100.3439128985, + 108.1086183005, + 107.878264731, + 108.102706707, + 108.161301386, + 108.322957578, + 108.3596992885, + 107.81365328950001, + 107.5684016895, + 89.38871540849999, + 86.6545703445, + 77.33757353300001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.916550565600005, + 38.538240202800004, + 65.2589327035, + 105.984934335, + 114.8423233315, + 126.1846563435, + 126.313173345, + 124.86178046799999, + 124.6505508585, + 125.042393726, + 119.6924350165, + 111.642536104, + 90.0205965715, + 86.95157999749999, + 77.68213173400001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.30115956305, + 29.6814054141, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.09621838, + 104.2927560915, + 108.23968036699999, + 107.620691258, + 106.27827566799999, + 74.7405102565, + 57.6907569925, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 29.6974197375, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.9658624495, + 73.965579358, + 56.2519097805, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.981372942600004, + 38.622568804299995, + 65.129916832, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.5900819105, + 105.76530526, + 108.4699640905, + 107.9379589725, + 106.2788056775, + 86.4454382385, + 84.2939523295, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.0049145315, + 38.5852813129, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.569224187, + 100.0801526525, + 103.188477542, + 104.673576698, + 104.370525654, + 103.96058217950001, + 86.109966257, + 85.1373697955, + 76.0038458755, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.0036444461, + 38.5769004685, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.7382274635, + 101.63590604699999, + 104.1161901935, + 103.9068103725, + 103.748569656, + 103.646478163, + 103.261396339, + 85.75888024049999, + 84.918936294, + 75.926787219, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.985428885000005, + 40.27654203125, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.0968926435, + 98.53935472250001, + 98.8776630125, + 98.8660103135, + 98.84459800549999, + 98.824432885, + 84.95702324899999, + 84.9029589565, + 75.8079426265, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.1927461754, + 40.411402271899995, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 99.2339844675, + 101.4898350345, + 101.8409417175, + 101.800861722, + 101.79822263, + 101.6942105515, + 101.303098707, + 85.7485739005, + 85.26530231950001, + 75.9409522405, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.563636399249994, + 31.60072184445, + 47.4024047884, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.650505589, + 99.583737978, + 99.8960774425, + 99.8351543755, + 99.7499821935, + 99.641475801, + 76.35329491799999, + 57.851957969999994, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 29.7158705596, + 29.6814054141, + 56.2519097805, + 56.6124346695, + 77.878543797, + 80.721183531, + 80.9682383485, + 78.903834637, + 77.04446552750001, + 57.339814806, + 48.819159781699994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.15530597175, + 40.40317402985, + 65.10874456900001, + 98.07451971399999, + 98.686212587, + 105.8731451005, + 114.3976890755, + 118.939394796, + 121.89982539799999, + 123.893227938, + 120.1053182475, + 114.26222241400001, + 93.92720313449999, + 90.941911719, + 79.25686420449999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.944550551249996, + 40.25818886455, + 65.10874456900001, + 98.1166111735, + 101.322179092, + 110.649168964, + 117.30287988, + 122.18161896500001, + 121.437574056, + 117.19097413499999, + 112.0775526215, + 107.9938709835, + 90.7430101505, + 86.951671617, + 76.51216876550001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.94954990115, + 40.263065632700005, + 65.10874456900001, + 98.199792359, + 104.5938775745, + 110.49071441150001, + 110.263791344, + 110.10339325049999, + 110.160190295, + 110.10942458150001, + 109.9833151975, + 109.7584625185, + 88.3522581475, + 85.68883737750001, + 76.44058113999999, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 34.964363157150004, + 40.275257238200005, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.092117629, + 99.04273862599999, + 99.9203230835, + 99.855067332, + 99.82523552900001, + 99.7446918695, + 101.318934294, + 85.241005517, + 84.694607969, + 75.438094578, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.2940736236, + 40.500783638600005, + 65.12388640750001, + 98.07451971399999, + 98.07451971399999, + 98.134024664, + 98.880976071, + 99.689817623, + 99.9205291095, + 99.907009018, + 99.8207228965, + 101.4545233125, + 85.6109166025, + 84.961075442, + 75.6785991815, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.55118202475, + 31.5912323536, + 47.41178917415, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 99.7876786385, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.97175228045, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 7.37235832415, + 29.942171514050003, + 29.72796429285, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 57.965068705, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.54957940025, + 38.59832689515, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.10628197349999, + 98.86036714, + 99.57786620899999, + 99.6444485805, + 99.593504777, + 101.19102275799999, + 109.61132784, + 84.9287383125, + 84.589432383, + 75.39798849, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.4336998792, + 38.656865901399996, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 101.01412367649999, + 105.9349548065, + 106.329070636, + 106.202081846, + 105.489575771, + 102.72143866249999, + 109.7567668935, + 84.91514941999999, + 84.6802888635, + 75.5124374215, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.263819825099997, + 38.5728769357, + 65.10874456900001, + 98.07451971399999, + 98.44458652, + 102.1736192245, + 105.2201709205, + 105.3242488985, + 105.1135066615, + 104.7713787075, + 105.434302574, + 110.4528932585, + 85.3314857355, + 84.883325356, + 75.847076196, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.3346647724, + 38.5511367158, + 65.124784399, + 101.265158692, + 109.17453144, + 113.931422143, + 117.651669551, + 116.94555037399999, + 114.02442753049999, + 110.79607230549999, + 110.415672477, + 116.3870099265, + 87.488896111, + 85.723165037, + 76.469888753, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.12664028555, + 38.538240202800004, + 65.10874456900001, + 98.7317070765, + 105.69616241150001, + 112.704911935, + 115.44631225500001, + 116.05753905399999, + 114.988144596, + 113.470253914, + 111.594130058, + 115.463234814, + 86.601459812, + 86.109023822, + 76.86645083, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 27.47759870855, + 29.6814054141, + 47.395074991550004, + 74.480028706, + 106.718160059, + 111.61233628, + 112.0113018305, + 112.6736849295, + 114.8787132845, + 114.8251420875, + 111.85009511, + 116.12361126149999, + 77.2120606375, + 59.0158129055, + 58.753053817, + 40.16820582495, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 9.085517248899999, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 74.2102772585, + 74.2531581785, + 77.66285204549999, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.294401747699997, + 38.5910844796, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.38264687325, + 38.5644753461, + 65.10874456900001, + 98.07451971399999, + 98.0969661645, + 99.39479796500001, + 103.180645705, + 105.358820017, + 105.1613510865, + 104.934612685, + 104.4639864795, + 109.81200108750001, + 85.26635558699999, + 84.719455305, + 75.4703747225, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 28.478176582950002, + 38.61554646625, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.1573599315, + 98.22123046099999, + 98.216024944, + 101.6328986395, + 108.476193708, + 84.27647180000001, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.0537615648, + 39.3408387865, + 65.807229224, + 98.5017004325, + 98.2613997805, + 98.301693788, + 98.20863150800001, + 98.07451971399999, + 98.1710794985, + 98.1521752995, + 101.628329013, + 108.589816641, + 84.49853529100001, + 84.488895585, + 75.642419941, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.607162199250002, + 38.90991046335, + 65.1167397485, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 29.572951218500002, + 29.77689472145, + 47.395074991550004, + 73.965579358, + 98.07451971399999, + 98.087362188, + 98.37967235100001, + 98.50975631099999, + 98.50088347799999, + 98.485522324, + 101.8860377265, + 108.702313752, + 75.51044820950001, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.739192281050002, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 77.391897207, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.1248951658, + 38.7900987569, + 65.209835127, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.22851761950001, + 98.4081491435, + 98.38752116650001, + 101.790849951, + 108.628751504, + 84.38883695850001, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.03995345815, + 38.552375262300004, + 65.10874456900001, + 99.389771275, + 108.6041419, + 115.680248494, + 120.117492115, + 121.415872189, + 119.178923634, + 115.720182248, + 113.6838050925, + 116.5273028025, + 87.732768209, + 86.321453538, + 77.0090750475, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 29.787745593950003, + 38.538240202800004, + 65.10874456900001, + 99.07971888750001, + 100.917174808, + 105.4059994725, + 107.7545387615, + 108.559186112, + 108.7204272545, + 108.617798293, + 110.5323670855, + 111.837753037, + 86.2290360435, + 85.610927893, + 76.078022437, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 77.391897207, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.235996639350002, + 38.85962056985, + 65.2391259525, + 98.07451971399999, + 98.07451971399999, + 98.08105179750001, + 98.400069065, + 98.7185611205, + 98.6804475385, + 98.5927176015, + 101.9175853445, + 108.37510987949999, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 29.4804335684, + 29.88734796805, + 47.523204442, + 73.969441399, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 10.7986761736, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 77.391897207, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 30.088507084750002, + 38.56896641225, + 65.10874456900001, + 98.1038766445, + 99.246880011, + 103.282556693, + 108.323422358, + 110.3775523885, + 111.0944139665, + 110.71599794500001, + 111.40166601050001, + 114.7547482425, + 86.670454856, + 85.5364479675, + 75.8576731965, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.9294697754, + 38.72421232655, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.3486199115, + 98.7797524185, + 98.806887464, + 98.764298509, + 98.7790938075, + 102.1373135865, + 108.784731169, + 84.298794466, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.20143681615, + 38.74326005415, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.7425364415, + 100.1951098315, + 100.558429673, + 100.475724263, + 100.36426177999999, + 103.45904103950001, + 109.5909693105, + 84.7161798155, + 84.28484424450001, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.15485029, + 38.804243976, + 65.10874456900001, + 98.07451971399999, + 98.1447018115, + 99.31284149150001, + 99.7514032575, + 99.7035197165, + 99.67112011799999, + 99.656509758, + 102.90590205, + 108.96303675, + 84.431646165, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.02184310965, + 38.761605065599994, + 65.109604998, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.39944765, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 31.63462021815, + 30.228225434349998, + 47.779352818599996, + 74.09377355449999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 75.3933294055, + 57.7614679645, + 57.8119813235, + 40.175056144900005, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 12.51183509835, + 5.6591993994, + 30.60461692875, + 30.3981505237, + 56.868316344499995, + 56.843905261, + 74.506210087, + 74.49500846149999, + 74.487158671, + 74.498885203, + 77.9436111095, + 66.966614726, + 49.31749985575, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.543166480699995, + 39.233585485, + 65.5334274055, + 98.119357379, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3989177255, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.15362543695, + 38.821559545, + 65.112796021, + 98.07451971399999, + 98.3420021415, + 101.4686221875, + 103.530091797, + 100.935710005, + 100.3671961875, + 99.77858109, + 103.980381586, + 108.5608692415, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.8042945652, + 38.58652463825, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.21251747550001, + 98.4112319695, + 98.4034590855, + 98.39691927049999, + 98.37918388749999, + 103.4897727235, + 108.612666644, + 84.49408634000001, + 84.3201056425, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 31.8179276983, + 38.6588951438, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 32.05289741435, + 38.7841738597, + 65.115223569, + 98.07451971399999, + 98.084703823, + 98.531679834, + 98.8396556395, + 98.8335996925, + 98.8259594865, + 98.8358443285, + 103.947762621, + 108.95151387, + 84.66423591300001, + 84.26548175, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 33.10181018175, + 30.02031113995, + 47.4478766367, + 73.965579358, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 103.213996488, + 108.353473262, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 29.7771721373, + 29.6814054141, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 79.105056132, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.6732545775, + 16.696028621299998, + 16.6847631288, + 34.1457417529, + 39.1859745066, + 65.364821986, + 98.079557503, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.2504094625, + 84.460612298, + 75.809928183, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.62519196805, + 16.6323495975, + 16.90138032055, + 17.047770173150003, + 17.21085491865, + 34.478283875049996, + 39.32527460725, + 65.324821238, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.65721146285, + 16.79077938135, + 17.0020739588, + 17.036129697699998, + 17.1880394185, + 34.43810720565, + 39.16624776015, + 65.181137369, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.700835519199998, + 16.763101080450003, + 16.7695564895, + 16.90005932865, + 17.0708111111, + 34.33907737455, + 38.986557370199996, + 65.11755216899999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.60814601265, + 16.6681736277, + 34.0890676676, + 38.875920242300005, + 65.10874456900001, + 98.07451971399999, + 98.07451971399999, + 98.092774943, + 98.1794877945, + 98.173617003, + 98.171416587, + 98.17029117499999, + 101.5762526945, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 33.26637237055, + 30.033064349100002, + 47.4080134407, + 73.965579358, + 98.07451971399999, + 98.32442184749999, + 98.8773643295, + 98.83863298349999, + 98.802329657, + 98.7967521495, + 102.190466592, + 108.649724529, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 14.22499402305, + 5.6591993994, + 29.6814054141, + 29.6814054141, + 56.900617030999996, + 58.8211875475, + 79.731543179, + 78.2891645305, + 78.724210353, + 79.98341933100001, + 80.0401433395, + 67.203992136, + 49.058337374349996, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.7463042808, + 38.685945589149995, + 65.10874456900001, + 98.07789532849999, + 100.8875950405, + 110.161236582, + 115.391987949, + 116.71213655, + 111.7211774585, + 108.27795680199999, + 108.129757255, + 110.37309067449999, + 85.743917786, + 85.265274763, + 76.0306047395, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.5690842291, + 38.57771928795, + 65.10874456900001, + 98.59749835550001, + 105.192185458, + 114.791826968, + 116.498316582, + 115.188047251, + 112.651649109, + 110.8686775985, + 111.2513303135, + 114.819650396, + 87.5138396345, + 86.633555888, + 77.3027533465, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.2787359927, + 38.538240202800004, + 65.10874456900001, + 98.7478073005, + 105.6448618345, + 114.2073179835, + 120.2000820005, + 120.1826760135, + 116.3488774435, + 113.660769964, + 110.22409025649999, + 110.7940263415, + 85.860814574, + 85.2336324195, + 75.938747284, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.381135937399996, + 38.54240452135, + 65.10874456900001, + 98.8964494, + 104.971772676, + 113.45196996450001, + 112.808334487, + 110.730862691, + 110.47286564150001, + 108.7419076355, + 107.063394993, + 110.47947516699999, + 85.8226221065, + 85.40150093150001, + 76.061119959, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 33.4807738505, + 38.5839587368, + 65.10874456900001, + 98.32399629300001, + 100.73420046349999, + 103.3401641665, + 103.20998616199999, + 103.19785384, + 103.18386531850001, + 103.30484605, + 104.9144086905, + 109.98880505700001, + 85.0928493225, + 84.620337242, + 75.43954980150001, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 33.09590974065, + 29.9431309534, + 47.4068062142, + 73.965579358, + 98.2428021705, + 98.7290606095, + 98.8136112415, + 99.100191912, + 99.11592018, + 99.051610669, + 102.315212758, + 108.8351945855, + 75.3876981175, + 57.674028539999995, + 57.674028539999995, + 39.96035896245, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 29.890764529949998, + 29.6814054141, + 56.254010516499996, + 57.0191690945, + 75.239144791, + 74.426005617, + 74.0473039365, + 73.965579358, + 77.391897207, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.887797085849996, + 39.11199519165, + 65.227675254, + 98.07451971399999, + 98.4070119065, + 104.914150241, + 113.11843999550001, + 108.90842531050001, + 104.58954008699999, + 102.429212574, + 102.676059475, + 108.914773991, + 84.6082405045, + 84.2717809695, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 29.847549267799998, + 29.6814054141, + 56.864818681, + 59.06144817, + 83.27550555799999, + 86.305570895, + 84.5170160795, + 80.5233282615, + 79.280646057, + 66.539973621, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.4551328318, + 38.92142728275, + 65.273814047, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.5321134848, + 38.9631624071, + 65.153085826, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.567422785199994, + 38.9024509697, + 65.1472328495, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.3876981175, + 30.45418713595, + 16.553543950349997, + 16.553543950349997, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 34.924103483550006, + 30.0675227067, + 47.54576009865, + 73.96727002200001, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.32530984249999, + 99.2078228525, + 98.353618229, + 101.5008375635, + 108.353473262, + 75.3876981175, + 57.674028539999995, + 57.7073092475, + 40.090922950949995, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 5.6591993994, + 30.13853677225, + 29.8100812195, + 56.2519097805, + 56.2519097805, + 73.965579358, + 73.965579358, + 73.965579358, + 73.965579358, + 77.391897207, + 66.5308633285, + 48.817193751199994, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 15.938152947799999, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 16.553543950349997, + 35.3319917274, + 38.79053391875, + 65.2323684005, + 98.0753801425, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 98.07451971399999, + 101.5008375635, + 108.353473262, + 84.244532906, + 84.244532906, + 75.395445821, + 30.45418713595, + 16.553543950349997, + 16.553543950349997 + ], + "bau_critical_load_met": true, + "bau_critical_load_met_time_steps": 0, + "annual_calculated_kwh": 1.12282905e6 + }, + "Messages": { + "errors": [], + "warnings": [ + [ + "core_reopt.jl_665", + [ + "Adding binary variable to model outages. Some solvers are very slow with integer variables", "Adding binary variable to model outages. Some solvers are very slow with integer variables" ] ], [ "core_pv.jl_152", [ + "PV inv_eff will be ignored because dc_coupled_with_storage=true. The inverter of the DC coupled PV and electric storage system will be defined by ElectricStorage inverter_efficiency_fraction and rectifier_efficiency_fraction.", "PV inv_eff will be ignored because dc_coupled_with_storage=true. The inverter of the DC coupled PV and electric storage system will be defined by ElectricStorage inverter_efficiency_fraction and rectifier_efficiency_fraction." ] + ], + [ + "src_operators.jl_279", + [ + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", + "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y." + ] + ], + [ + "core_electric_utility.jl_321", + [ + "When using stochastic outage modeling (i.e. outage_start_time_steps, outage_durations, outage_probabilities), \n emissions and renewable energy percentage calculations and constraints do not consider outages." + ] ] ] }, - "status": "error" + "PV": [ + { + "electric_to_grid_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "production_factor_series": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0286, + 0.450571, + 0.633268, + 0.744947, + 0.793452, + 0.78297, + 0.715558, + 0.588895, + 0.40189299999999994, + 0.101677, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028162, + 0.45753699999999997, + 0.642251, + 0.754753, + 0.803629, + 0.793688, + 0.7219990000000001, + 0.595598, + 0.408476, + 0.007211, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028044, + 0.19891999999999999, + 0.646805, + 0.767886, + 0.824961, + 0.815863, + 0.748986, + 0.618642, + 0.427358, + 0.109796, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10198600000000001, + 0.46055799999999997, + 0.646065, + 0.761364, + 0.808933, + 0.798491, + 0.731373, + 0.603872, + 0.418497, + 0.107887, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027690000000000003, + 0.44222100000000003, + 0.623648, + 0.736392, + 0.784879, + 0.774659, + 0.5752849999999999, + 0.384918, + 0.407344, + 0.051701000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034294, + 0.43924, + 0.607711, + 0.49395999999999995, + 0.470439, + 0.590503, + 0.701127, + 0.582704, + 0.406561, + 0.11155, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09420300000000001, + 0.423632, + 0.5959139999999999, + 0.7097100000000001, + 0.763675, + 0.760593, + 0.702431, + 0.5813189999999999, + 0.4016, + 0.1135, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.099858, + 0.451869, + 0.6443920000000001, + 0.768126, + 0.8269099999999999, + 0.819444, + 0.75181, + 0.627075, + 0.436331, + 0.131458, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026475000000000002, + 0.205537, + 0.631447, + 0.743663, + 0.795695, + 0.788168, + 0.726307, + 0.604583, + 0.425152, + 0.137095, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04018, + 0.439099, + 0.618131, + 0.621395, + 0.559123, + 0.663237, + 0.450356, + 0.433272, + 0.25259899999999996, + 0.04169, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0039169999999999995, + 0.025873999999999998, + 0.168769, + 0.677282, + 0.745774, + 0.582485, + 0.5360069999999999, + 0.581296, + 0.369096, + 0.135547, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09023, + 0.421796, + 0.607395, + 0.726932, + 0.783492, + 0.777952, + 0.713266, + 0.5940599999999999, + 0.419165, + 0.147207, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094402, + 0.425144, + 0.6031749999999999, + 0.7110639999999999, + 0.7654890000000001, + 0.7645, + 0.7089529999999999, + 0.594789, + 0.419214, + 0.144476, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10291800000000001, + 0.443369, + 0.627301, + 0.7420359999999999, + 0.660114, + 0.556516, + 0.502782, + 0.5106539999999999, + 0.335623, + 0.16300299999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.044334000000000005, + 0.40844600000000003, + 0.581538, + 0.505087, + 0.598952, + 0.344792, + 0.696433, + 0.224176, + 0.02542, + 0.017504000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09154999999999999, + 0.40002, + 0.591764, + 0.715178, + 0.777251, + 0.7770410000000001, + 0.7196910000000001, + 0.603445, + 0.42285700000000004, + 0.15934299999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096468, + 0.403909, + 0.5793959999999999, + 0.693592, + 0.753745, + 0.585834, + 0.70137, + 0.5902000000000001, + 0.417464, + 0.16236699999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.073009, + 0.300634, + 0.329412, + 0.5555910000000001, + 0.6068490000000001, + 0.586326, + 0.375901, + 0.352163, + 0.16000399999999998, + 0.018201000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.079705, + 0.039686, + 0.182792, + 0.30805, + 0.276697, + 0.7603300000000001, + 0.70805, + 0.336334, + 0.277441, + 0.017983, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.098058, + 0.409474, + 0.606632, + 0.72363, + 0.7864650000000001, + 0.295967, + 0.053444000000000005, + 0.078268, + 0.007386, + 0.01093, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034525, + 0.169334, + 0.444776, + 0.56665, + 0.59008, + 0.608679, + 0.456737, + 0.347829, + 0.344897, + 0.182774, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.11413, + 0.428121, + 0.6001340000000001, + 0.713409, + 0.7776660000000001, + 0.7805700000000001, + 0.722752, + 0.609504, + 0.440609, + 0.182881, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10841500000000001, + 0.407538, + 0.589562, + 0.47498599999999996, + 0.598577, + 0.520196, + 0.482027, + 0.448958, + 0.284584, + 0.050682000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016729, + 0.157054, + 0.171817, + 0.261702, + 0.26113099999999995, + 0.276725, + 0.22903, + 0.07654000000000001, + 0.039643, + 0.015227000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.050504, + 0.15126699999999998, + 0.09453700000000001, + 0.163939, + 0.004285, + 0.751994, + 0.632285, + 0.448647, + 0.188441, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.100645, + 0.23713499999999998, + 0.44599500000000003, + 0.022806999999999997, + 0.5645410000000001, + 0.555473, + 0.448182, + 0.011151999999999999, + 0.418286, + 0.152155, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.125967, + 0.452179, + 0.666222, + 0.804135, + 0.833333, + 0.833333, + 0.8020309999999999, + 0.685693, + 0.493643, + 0.221669, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.149752, + 0.466714, + 0.659509, + 0.782608, + 0.833333, + 0.833333, + 0.779763, + 0.65934, + 0.479859, + 0.22078, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.149283, + 0.458294, + 0.637745, + 0.7479389999999999, + 0.797717, + 0.792046, + 0.561855, + 0.534002, + 0.260548, + 0.070947, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.044878999999999995, + 0.430502, + 0.616332, + 0.598413, + 0.643923, + 0.632186, + 0.5630850000000001, + 0.47594200000000003, + 0.33596499999999996, + 0.10489, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022372, + 0.260567, + 0.429184, + 0.832736, + 0.833333, + 0.780323, + 0.66086, + 0.482171, + 0.18476900000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10989, + 0.388042, + 0.584493, + 0.701311, + 0.760602, + 0.772002, + 0.7273310000000001, + 0.626444, + 0.457374, + 0.200685, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.15815, + 0.461204, + 0.650505, + 0.638783, + 0.667528, + 0.623993, + 0.761259, + 0.6451319999999999, + 0.479234, + 0.23832, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.173528, + 0.46302, + 0.6451699999999999, + 0.7592369999999999, + 0.815883, + 0.812612, + 0.753826, + 0.644084, + 0.478806, + 0.240957, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.164988, + 0.44464499999999996, + 0.6259880000000001, + 0.746251, + 0.803201, + 0.802269, + 0.743349, + 0.632984, + 0.468763, + 0.23313, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036122, + 0.217928, + 0.364184, + 0.5746359999999999, + 0.623495, + 0.5682590000000001, + 0.472519, + 0.459391, + 0.275068, + 0.086787, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.16855099999999998, + 0.43074799999999996, + 0.5974400000000001, + 0.71784, + 0.782592, + 0.790762, + 0.621947, + 0.512969, + 0.378907, + 0.15110900000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08886100000000001, + 0.30909800000000004, + 0.44502600000000003, + 0.539613, + 0.660063, + 0.516105, + 0.483675, + 0.375995, + 0.34377199999999997, + 0.13292099999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.077481, + 0.183764, + 0.364105, + 0.368695, + 0.294676, + 0.5210359999999999, + 0.5571889999999999, + 0.32177, + 0.28090899999999996, + 0.081801, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.15431, + 0.29091300000000003, + 0.43531200000000003, + 0.45634399999999997, + 0.5829500000000001, + 0.148619, + 0.16697800000000002, + 0.09240999999999999, + 0.076974, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020406, + 0.177107, + 0.077952, + 0.179719, + 0.512512, + 0.47045499999999996, + 0.522221, + 0.4382, + 0.348827, + 0.047588, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.426782, + 0.619888, + 0.7427630000000001, + 0.813002, + 0.8206509999999999, + 0.764043, + 0.65728, + 0.48028899999999997, + 0.23641, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.159789, + 0.41400200000000004, + 0.383481, + 0.7319880000000001, + 0.801713, + 0.8031459999999999, + 0.7624529999999999, + 0.6487050000000001, + 0.473391, + 0.012986000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.182844, + 0.444467, + 0.6377200000000001, + 0.307536, + 0.821686, + 0.82773, + 0.776646, + 0.6681739999999999, + 0.379492, + 0.244171, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.19666, + 0.4618, + 0.649791, + 0.778346, + 0.833333, + 0.833333, + 0.7903640000000001, + 0.674843, + 0.503323, + 0.261649, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.063964, + 0.46842399999999995, + 0.6415599999999999, + 0.753082, + 0.81137, + 0.8115950000000001, + 0.753113, + 0.6421979999999999, + 0.477145, + 0.250693, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.202893, + 0.44939999999999997, + 0.628192, + 0.7456470000000001, + 0.806683, + 0.810988, + 0.75764, + 0.646557, + 0.48032400000000003, + 0.24621700000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.1977, + 0.44957100000000005, + 0.632799, + 0.75189, + 0.811101, + 0.8096230000000001, + 0.753838, + 0.640026, + 0.388192, + 0.047199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.053673, + 0.270929, + 0.339274, + 0.450962, + 0.373411, + 0.21321, + 0.46469299999999997, + 0.467673, + 0.352525, + 0.161339, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025070000000000002, + 0.01982, + 0.026404, + 0.092708, + 0.593568, + 0.48880399999999996, + 0.646008, + 0.48217899999999997, + 0.250653, + 0.006632, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.20622300000000002, + 0.452774, + 0.62728, + 0.739916, + 0.801964, + 0.8072630000000001, + 0.7589349999999999, + 0.657741, + 0.488255, + 0.261502, + 0.009914, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.196677, + 0.43737200000000004, + 0.602696, + 0.7128479999999999, + 0.783792, + 0.797941, + 0.7564160000000001, + 0.655254, + 0.493145, + 0.26468, + 0.012121999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.195046, + 0.13467400000000002, + 0.126432, + 0.08637099999999999, + 0.4903, + 0.6004619999999999, + 0.547961, + 0.42044600000000004, + 0.32540199999999997, + 0.15460300000000002, + 0.0016979999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.234482, + 0.504428, + 0.693958, + 0.819987, + 0.833333, + 0.833333, + 0.833333, + 0.726069, + 0.545953, + 0.29538600000000004, + 0.007253999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.235769, + 0.493041, + 0.6696660000000001, + 0.783592, + 0.826952, + 0.813374, + 0.749607, + 0.651683, + 0.503247, + 0.280216, + 0.007592, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.223576, + 0.470523, + 0.6536109999999999, + 0.7803089999999999, + 0.833333, + 0.833333, + 0.591489, + 0.10359900000000001, + 0.031994, + 0.05282, + 0.015186, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.218893, + 0.46704399999999996, + 0.640811, + 0.762932, + 0.828513, + 0.833333, + 0.7819109999999999, + 0.674176, + 0.50845, + 0.273312, + 0.021475, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003749, + 0.492428, + 0.6835800000000001, + 0.6376040000000001, + 0.651986, + 0.833333, + 0.8287859999999999, + 0.711244, + 0.041110999999999995, + 0.049970999999999995, + 0.002016, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.248348, + 0.50992, + 0.695159, + 0.8175549999999999, + 0.833333, + 0.833333, + 0.833333, + 0.7190700000000001, + 0.542566, + 0.006356, + 0.0149, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025703, + 0.28707, + 0.22825299999999998, + 0.31976499999999997, + 0.484998, + 0.068646, + 0.47113, + 0.28612400000000004, + 0.080551, + 0.121452, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.065211, + 0.270589, + 0.34073899999999996, + 0.43450700000000003, + 0.564427, + 0.470264, + 0.440012, + 0.303741, + 0.20243799999999998, + 0.08629, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.000625, + 0.10296599999999999, + 0.274528, + 0.43856799999999996, + 0.6285890000000001, + 0.64235, + 0.6104959999999999, + 0.69977, + 0.5169210000000001, + 0.294677, + 0.117826, + 0.003814, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004866, + 0.23189099999999999, + 0.467852, + 0.439327, + 0.595376, + 0.635923, + 0.66084, + 0.491358, + 0.429028, + 0.481851, + 0.260872, + 0.025587, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006404, + 0.23831899999999998, + 0.468815, + 0.621392, + 0.729179, + 0.512265, + 0.7930119999999999, + 0.745931, + 0.522497, + 0.478852, + 0.125235, + 0.025823, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0023239999999999997, + 0.110476, + 0.26891000000000004, + 0.34832, + 0.735032, + 0.7888780000000001, + 0.626105, + 0.7520209999999999, + 0.644224, + 0.47677600000000003, + 0.258363, + 0.027822, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014503, + 0.248988, + 0.491815, + 0.6668529999999999, + 0.631985, + 0.66659, + 0.59104, + 0.587684, + 0.5590170000000001, + 0.390397, + 0.27675700000000003, + 0.0071070000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020686, + 0.26943599999999995, + 0.512773, + 0.6897960000000001, + 0.801706, + 0.833333, + 0.833333, + 0.784597, + 0.674201, + 0.508015, + 0.21973900000000002, + 0.023818000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00929, + 0.193048, + 0.490407, + 0.656295, + 0.763794, + 0.805766, + 0.783956, + 0.7152000000000001, + 0.624163, + 0.366973, + 0.205098, + 0.032366, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022431999999999997, + 0.257743, + 0.366151, + 0.652868, + 0.765331, + 0.8191269999999999, + 0.815251, + 0.763028, + 0.6505259999999999, + 0.48769999999999997, + 0.26577300000000004, + 0.03592, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022263, + 0.155226, + 0.333334, + 0.681357, + 0.642654, + 0.622414, + 0.6835019999999999, + 0.557971, + 0.494259, + 0.314836, + 0.19498, + 0.025546, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027193000000000002, + 0.266175, + 0.5036809999999999, + 0.675987, + 0.791523, + 0.833333, + 0.833333, + 0.7767229999999999, + 0.6628390000000001, + 0.49724599999999997, + 0.27077300000000004, + 0.039682, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.029364, + 0.263062, + 0.49554000000000004, + 0.665284, + 0.7763880000000001, + 0.831767, + 0.833333, + 0.776888, + 0.663154, + 0.49977699999999997, + 0.27498500000000003, + 0.042381999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034777, + 0.272615, + 0.500659, + 0.6572709999999999, + 0.754832, + 0.803843, + 0.802212, + 0.753706, + 0.6511849999999999, + 0.49210899999999996, + 0.27166500000000005, + 0.042554, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036937, + 0.272994, + 0.508205, + 0.674024, + 0.788607, + 0.833333, + 0.8306549999999999, + 0.774006, + 0.656318, + 0.49120199999999997, + 0.26981700000000003, + 0.04192, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035573, + 0.258268, + 0.480442, + 0.625922, + 0.727953, + 0.766827, + 0.7822100000000001, + 0.740966, + 0.6431950000000001, + 0.49036, + 0.274265, + 0.044278, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043862000000000005, + 0.28632799999999997, + 0.519708, + 0.687342, + 0.801947, + 0.833333, + 0.833333, + 0.796066, + 0.684133, + 0.458973, + 0.199952, + 0.034779000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.046604, + 0.29249200000000003, + 0.532813, + 0.701804, + 0.8111240000000001, + 0.833333, + 0.833333, + 0.7815610000000001, + 0.671753, + 0.5065930000000001, + 0.284866, + 0.048066000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.048201999999999995, + 0.293671, + 0.5304869999999999, + 0.694885, + 0.803686, + 0.833333, + 0.833333, + 0.7690710000000001, + 0.65273, + 0.49297399999999997, + 0.277183, + 0.047128, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020489999999999998, + 0.159672, + 0.297165, + 0.609066, + 0.676987, + 0.642823, + 0.636871, + 0.605011, + 0.443596, + 0.481607, + 0.26773, + 0.045341, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.048548, + 0.27296, + 0.489988, + 0.647985, + 0.748813, + 0.8024439999999999, + 0.8025789999999999, + 0.751006, + 0.6422720000000001, + 0.47753300000000004, + 0.258759, + 0.042466000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.048032, + 0.263108, + 0.477387, + 0.626881, + 0.70925, + 0.7532530000000001, + 0.7694719999999999, + 0.7346670000000001, + 0.63935, + 0.479748, + 0.26255900000000004, + 0.044708, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052124000000000004, + 0.274038, + 0.36294099999999996, + 0.476195, + 0.705324, + 0.656172, + 0.6397569999999999, + 0.572809, + 0.531555, + 0.461238, + 0.18224100000000001, + 0.033141, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.050497999999999994, + 0.264375, + 0.351066, + 0.5514819999999999, + 0.745287, + 0.7885650000000001, + 0.7804439999999999, + 0.717212, + 0.434625, + 0.404483, + 0.19178399999999998, + 0.042551, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052564, + 0.267226, + 0.47595800000000005, + 0.630185, + 0.7523869999999999, + 0.8087409999999999, + 0.80862, + 0.653411, + 0.6360990000000001, + 0.47718299999999997, + 0.256821, + 0.04431, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059616999999999996, + 0.290353, + 0.5164500000000001, + 0.682253, + 0.797115, + 0.833333, + 0.16717400000000002, + 0.45448099999999997, + 0.46339199999999997, + 0.29006099999999996, + 0.10355299999999999, + 0.046447, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059647, + 0.29149400000000003, + 0.513788, + 0.673314, + 0.769463, + 0.813923, + 0.8218840000000001, + 0.76376, + 0.654168, + 0.486163, + 0.110514, + 0.047460999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.060957, + 0.279205, + 0.487477, + 0.634207, + 0.7255739999999999, + 0.6654990000000001, + 0.664925, + 0.60641, + 0.559984, + 0.45113, + 0.24507900000000002, + 0.045424, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.061514000000000006, + 0.158634, + 0.34015300000000004, + 0.626716, + 0.743757, + 0.7635510000000001, + 0.576456, + 0.615402, + 0.624807, + 0.430882, + 0.166222, + 0.032039, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07167799999999999, + 0.320742, + 0.547427, + 0.710536, + 0.817975, + 0.833333, + 0.833333, + 0.792452, + 0.676607, + 0.5065919999999999, + 0.27848399999999995, + 0.049923, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06979600000000001, + 0.299483, + 0.5156040000000001, + 0.672848, + 0.783323, + 0.833333, + 0.833333, + 0.781905, + 0.670515, + 0.49901, + 0.0035600000000000002, + 0.001519, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076033, + 0.325241, + 0.555669, + 0.7183440000000001, + 0.828828, + 0.833333, + 0.833333, + 0.8065650000000001, + 0.683909, + 0.5125149999999999, + 0.27913299999999996, + 0.051022, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07630500000000001, + 0.317442, + 0.534298, + 0.690827, + 0.788548, + 0.828337, + 0.812378, + 0.618195, + 0.6447459999999999, + 0.484323, + 0.267463, + 0.049756999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07509199999999999, + 0.295948, + 0.409665, + 0.5080330000000001, + 0.700648, + 0.754485, + 0.7657820000000001, + 0.722059, + 0.6255620000000001, + 0.46718200000000004, + 0.25702600000000003, + 0.049191000000000006, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.077741, + 0.301195, + 0.332797, + 0.548603, + 0.757414, + 0.8126749999999999, + 0.8148029999999999, + 0.760481, + 0.650139, + 0.488832, + 0.26615300000000003, + 0.051476, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081947, + 0.31866500000000003, + 0.542439, + 0.707737, + 0.8066409999999999, + 0.833333, + 0.833333, + 0.79441, + 0.6744969999999999, + 0.294969, + 0.266897, + 0.053130000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.086087, + 0.322366, + 0.544869, + 0.707036, + 0.818068, + 0.833333, + 0.833333, + 0.781256, + 0.664436, + 0.493467, + 0.266914, + 0.05339, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.087821, + 0.32359, + 0.5374439999999999, + 0.691071, + 0.782223, + 0.81831, + 0.801588, + 0.740737, + 0.635092, + 0.48212900000000003, + 0.265005, + 0.052945, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.065011, + 0.30724, + 0.505894, + 0.6535359999999999, + 0.754046, + 0.80425, + 0.799144, + 0.743028, + 0.6292490000000001, + 0.46536500000000003, + 0.257074, + 0.050731, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.087405, + 0.30928300000000003, + 0.508621, + 0.6600090000000001, + 0.756638, + 0.8083859999999999, + 0.808361, + 0.753652, + 0.640535, + 0.471777, + 0.232572, + 0.045505000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09006399999999999, + 0.322381, + 0.529067, + 0.6774049999999999, + 0.7831319999999999, + 0.833333, + 0.831739, + 0.769178, + 0.653711, + 0.489156, + 0.267332, + 0.051216, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.318284, + 0.296548, + 0.688505, + 0.131945, + 0.40971199999999997, + 0.833333, + 0.775517, + 0.552646, + 0.324836, + 0.052094, + 0.001581, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.093538, + 0.32006999999999997, + 0.296445, + 0.6869059999999999, + 0.787072, + 0.833271, + 0.690156, + 0.75807, + 0.35645, + 0.170287, + 0.145337, + 0.030512, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.31214600000000003, + 0.530008, + 0.144901, + 0.017404, + 0.057464, + 0.02689, + 0.10618899999999999, + 0.104592, + 0.19900700000000002, + 0.06780599999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06933299999999999, + 0.342296, + 0.558711, + 0.7151430000000001, + 0.809067, + 0.833333, + 0.833333, + 0.772605, + 0.654187, + 0.490548, + 0.26618400000000003, + 0.049963, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0012330000000000002, + 0.09572, + 0.321052, + 0.5200220000000001, + 0.65449, + 0.728992, + 0.757262, + 0.762134, + 0.719857, + 0.620426, + 0.46901600000000004, + 0.253298, + 0.050327, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0016690000000000001, + 0.09465900000000001, + 0.31650599999999995, + 0.510839, + 0.647573, + 0.7342380000000001, + 0.7676499999999999, + 0.749907, + 0.70039, + 0.6027250000000001, + 0.454475, + 0.248599, + 0.049688, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002056, + 0.092822, + 0.314685, + 0.50071, + 0.627832, + 0.704061, + 0.742521, + 0.7506520000000001, + 0.709469, + 0.6083970000000001, + 0.456293, + 0.249084, + 0.04615, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004171, + 0.079361, + 0.312446, + 0.505381, + 0.5305059999999999, + 0.6073970000000001, + 0.768773, + 0.758687, + 0.707098, + 0.602851, + 0.451488, + 0.196221, + 0.046654, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00368, + 0.09466, + 0.31739999999999996, + 0.5110779999999999, + 0.641614, + 0.718328, + 0.7459199999999999, + 0.7219439999999999, + 0.656686, + 0.561312, + 0.423359, + 0.228249, + 0.047985, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0031160000000000003, + 0.09451000000000001, + 0.296693, + 0.48783800000000005, + 0.626103, + 0.7262540000000001, + 0.7552960000000001, + 0.730158, + 0.6605030000000001, + 0.552884, + 0.423077, + 0.234292, + 0.043821, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003677, + 0.095359, + 0.31258600000000003, + 0.494859, + 0.622539, + 0.699718, + 0.727936, + 0.7180639999999999, + 0.668481, + 0.574665, + 0.433135, + 0.237929, + 0.045067, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003932, + 0.095683, + 0.307305, + 0.48436, + 0.618182, + 0.715095, + 0.757069, + 0.752592, + 0.699485, + 0.595964, + 0.440961, + 0.24171299999999998, + 0.047500999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004831, + 0.102782, + 0.320268, + 0.511568, + 0.645338, + 0.736718, + 0.780067, + 0.771028, + 0.7257100000000001, + 0.616525, + 0.462174, + 0.253173, + 0.049109, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0065190000000000005, + 0.066915, + 0.314789, + 0.487471, + 0.6466580000000001, + 0.62102, + 0.356428, + 0.425276, + 0.453667, + 0.15556999999999999, + 0.141686, + 0.0891, + 0.023103000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.077063, + 0.22902, + 0.30123300000000003, + 0.35945499999999997, + 0.16671100000000003, + 0.455053, + 0.591701, + 0.5196029999999999, + 0.295059, + 0.328498, + 0.182773, + 0.046209, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006555, + 0.100576, + 0.321745, + 0.516317, + 0.65977, + 0.753534, + 0.7979740000000001, + 0.791191, + 0.350196, + 0.44869099999999995, + 0.18113900000000002, + 0.102381, + 0.017366, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008257, + 0.106676, + 0.332041, + 0.5264310000000001, + 0.663759, + 0.753968, + 0.789001, + 0.767882, + 0.705055, + 0.5944210000000001, + 0.445972, + 0.23931200000000002, + 0.0505, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008976000000000001, + 0.107257, + 0.32126499999999997, + 0.5135080000000001, + 0.654913, + 0.748992, + 0.775543, + 0.74678, + 0.6782, + 0.569312, + 0.42905, + 0.236399, + 0.048375, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010291, + 0.108006, + 0.31831099999999996, + 0.505023, + 0.638344, + 0.7184769999999999, + 0.7381449999999999, + 0.713146, + 0.660882, + 0.564436, + 0.424891, + 0.229594, + 0.051271000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010466, + 0.10596599999999999, + 0.310052, + 0.481008, + 0.612304, + 0.703692, + 0.747678, + 0.74293, + 0.6925560000000001, + 0.584621, + 0.430902, + 0.242638, + 0.04711, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010247, + 0.104661, + 0.324788, + 0.512518, + 0.644531, + 0.726992, + 0.750174, + 0.716337, + 0.652427, + 0.572123, + 0.433572, + 0.23425, + 0.046297, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011493, + 0.104272, + 0.31566500000000003, + 0.49829199999999996, + 0.623115, + 0.701994, + 0.725149, + 0.6996140000000001, + 0.654077, + 0.568095, + 0.42760000000000004, + 0.22891999999999998, + 0.048407, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010798, + 0.10084, + 0.30776299999999995, + 0.488156, + 0.612795, + 0.69465, + 0.720113, + 0.703209, + 0.640765, + 0.549727, + 0.410707, + 0.221828, + 0.049038, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012454, + 0.10273499999999999, + 0.29896100000000003, + 0.462991, + 0.5818289999999999, + 0.673712, + 0.715769, + 0.713335, + 0.662376, + 0.566331, + 0.421135, + 0.22682400000000003, + 0.050051000000000005, + 0.000265, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013356, + 0.10736, + 0.315653, + 0.475482, + 0.547633, + 0.649818, + 0.649512, + 0.755608, + 0.697936, + 0.478663, + 0.39053699999999997, + 0.211218, + 0.052392, + 0.000885, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017774, + 0.114646, + 0.269629, + 0.455324, + 0.634439, + 0.718846, + 0.765439, + 0.26036200000000004, + 0.315164, + 0.609187, + 0.455052, + 0.18510400000000002, + 0.061958, + 0.0011120000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021055, + 0.120321, + 0.326667, + 0.249369, + 0.6607000000000001, + 0.7526860000000001, + 0.796169, + 0.695712, + 0.331509, + 0.07050100000000001, + 0.382584, + 0.186471, + 0.050327, + 0.002114, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016376, + 0.114142, + 0.334106, + 0.523788, + 0.46036, + 0.743443, + 0.774518, + 0.7570990000000001, + 0.48442599999999997, + 0.47536399999999995, + 0.429522, + 0.23114099999999999, + 0.053783000000000004, + 0.001906, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017890999999999997, + 0.11111199999999999, + 0.305196, + 0.478737, + 0.6079049999999999, + 0.6958719999999999, + 0.740216, + 0.733753, + 0.680134, + 0.57128, + 0.422783, + 0.22766499999999998, + 0.060482999999999995, + 0.001453, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02252, + 0.118865, + 0.309426, + 0.489388, + 0.6264160000000001, + 0.72094, + 0.765513, + 0.758164, + 0.696181, + 0.592469, + 0.43827499999999997, + 0.234696, + 0.054144, + 0.002975, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020886, + 0.115802, + 0.315673, + 0.494723, + 0.63, + 0.7193780000000001, + 0.760879, + 0.752655, + 0.6970230000000001, + 0.592936, + 0.4432, + 0.23829599999999998, + 0.050184, + 0.003494, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01805, + 0.113789, + 0.322474, + 0.506938, + 0.6386000000000001, + 0.7380220000000001, + 0.7788529999999999, + 0.767454, + 0.707477, + 0.599621, + 0.447622, + 0.24037899999999998, + 0.049343000000000005, + 0.002857, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017647, + 0.11895900000000001, + 0.351456, + 0.5451950000000001, + 0.6781309999999999, + 0.758325, + 0.792749, + 0.776025, + 0.710465, + 0.606226, + 0.45502699999999996, + 0.24554900000000002, + 0.053021, + 0.0037949999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021425999999999997, + 0.11785899999999999, + 0.33396499999999996, + 0.520678, + 0.652086, + 0.738655, + 0.77783, + 0.768207, + 0.708399, + 0.603823, + 0.451034, + 0.244024, + 0.056997, + 0.0046, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025890999999999997, + 0.121327, + 0.32797000000000004, + 0.517463, + 0.656903, + 0.74773, + 0.787175, + 0.683625, + 0.145391, + 0.449699, + 0.448711, + 0.241917, + 0.059165, + 0.004690000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024353000000000003, + 0.116798, + 0.319142, + 0.502363, + 0.6362279999999999, + 0.721268, + 0.762564, + 0.753633, + 0.701221, + 0.594227, + 0.360646, + 0.212177, + 0.060020000000000004, + 0.006011, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023062000000000003, + 0.115385, + 0.318305, + 0.508492, + 0.649561, + 0.744592, + 0.787408, + 0.780338, + 0.716335, + 0.610981, + 0.456218, + 0.245863, + 0.053357999999999996, + 0.004723, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018521999999999997, + 0.11134999999999999, + 0.325488, + 0.507606, + 0.630612, + 0.700866, + 0.728102, + 0.714431, + 0.666462, + 0.568956, + 0.429075, + 0.23388399999999998, + 0.047885, + 0.004823, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018206, + 0.110859, + 0.326323, + 0.508023, + 0.63478, + 0.713638, + 0.7416079999999999, + 0.72251, + 0.6599729999999999, + 0.5539189999999999, + 0.419891, + 0.23247800000000002, + 0.049087000000000006, + 0.004857, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018628, + 0.107973, + 0.315065, + 0.490662, + 0.616642, + 0.689198, + 0.711938, + 0.687785, + 0.6243920000000001, + 0.5432359999999999, + 0.41836399999999996, + 0.22775299999999998, + 0.050698, + 0.005151, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018358, + 0.105473, + 0.303141, + 0.469229, + 0.596981, + 0.684713, + 0.72653, + 0.722366, + 0.670046, + 0.569789, + 0.426495, + 0.230902, + 0.048235, + 0.005031, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017026, + 0.105659, + 0.310141, + 0.476236, + 0.59358, + 0.669273, + 0.698151, + 0.688505, + 0.635335, + 0.545533, + 0.414512, + 0.225163, + 0.051445, + 0.005476, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020076, + 0.104229, + 0.297725, + 0.46619, + 0.588707, + 0.6781739999999999, + 0.717313, + 0.714263, + 0.663059, + 0.565624, + 0.42561200000000005, + 0.232578, + 0.047889, + 0.005946, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017606, + 0.105719, + 0.238644, + 0.491149, + 0.6243139999999999, + 0.560535, + 0.7503329999999999, + 0.7383970000000001, + 0.6829080000000001, + 0.583312, + 0.435453, + 0.236799, + 0.050226999999999994, + 0.006876999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022439, + 0.111043, + 0.32108800000000004, + 0.5059870000000001, + 0.639225, + 0.7277659999999999, + 0.766937, + 0.757749, + 0.703331, + 0.598426, + 0.44866500000000004, + 0.243835, + 0.050792000000000004, + 0.007489, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026583, + 0.116976, + 0.31985800000000003, + 0.503658, + 0.639937, + 0.731346, + 0.76786, + 0.7583289999999999, + 0.699305, + 0.593778, + 0.44572, + 0.241714, + 0.05638, + 0.00869, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025828, + 0.113846, + 0.309731, + 0.48231599999999997, + 0.603705, + 0.689261, + 0.72146, + 0.709804, + 0.661774, + 0.56584, + 0.428647, + 0.236154, + 0.052384, + 0.008686999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02186, + 0.107363, + 0.304884, + 0.47581, + 0.59627, + 0.677749, + 0.707368, + 0.692353, + 0.641794, + 0.5492480000000001, + 0.41504399999999997, + 0.227178, + 0.055352, + 0.008679000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022837, + 0.108329, + 0.297632, + 0.465415, + 0.591086, + 0.6747989999999999, + 0.712321, + 0.704955, + 0.513889, + 0.55824, + 0.41801, + 0.211184, + 0.060215000000000005, + 0.009994999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027086, + 0.10156399999999999, + 0.300896, + 0.47039299999999995, + 0.5929829999999999, + 0.675374, + 0.7154389999999999, + 0.7067680000000001, + 0.656062, + 0.561526, + 0.420931, + 0.23238499999999998, + 0.056902, + 0.01016, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026749, + 0.099407, + 0.22459, + 0.24485200000000001, + 0.5129360000000001, + 0.594277, + 0.499435, + 0.34096499999999996, + 0.113253, + 0.389322, + 0.17610800000000001, + 0.232566, + 0.058821, + 0.01137, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024446000000000002, + 0.10292, + 0.288817, + 0.470563, + 0.587526, + 0.6634479999999999, + 0.711379, + 0.6465850000000001, + 0.47048700000000004, + 0.480901, + 0.383762, + 0.194849, + 0.063973, + 0.011786, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022508, + 0.095442, + 0.233078, + 0.209598, + 0.457675, + 0.538803, + 0.615423, + 0.601993, + 0.558013, + 0.272806, + 0.23549199999999998, + 0.155949, + 0.056026000000000006, + 0.011869999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024080999999999998, + 0.104823, + 0.28908100000000003, + 0.456069, + 0.580834, + 0.6550900000000001, + 0.6732630000000001, + 0.647371, + 0.594966, + 0.51464, + 0.393495, + 0.216064, + 0.055954000000000004, + 0.012646000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022435, + 0.099913, + 0.288506, + 0.454903, + 0.576324, + 0.660193, + 0.700664, + 0.6987089999999999, + 0.650706, + 0.5555789999999999, + 0.417808, + 0.232491, + 0.056086, + 0.012664, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019122, + 0.062392, + 0.166643, + 0.126191, + 0.155042, + 0.553751, + 0.47687799999999997, + 0.709415, + 0.6657759999999999, + 0.45122, + 0.430092, + 0.239257, + 0.069127, + 0.013733, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025147, + 0.104072, + 0.302836, + 0.485308, + 0.618636, + 0.707659, + 0.7501230000000001, + 0.74401, + 0.6906680000000001, + 0.587548, + 0.44193400000000005, + 0.243698, + 0.060195, + 0.014825, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023091999999999998, + 0.107852, + 0.32506799999999997, + 0.514827, + 0.65712, + 0.7487910000000001, + 0.790323, + 0.781319, + 0.718595, + 0.6122340000000001, + 0.461611, + 0.25816300000000003, + 0.059158999999999996, + 0.014372, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02091, + 0.10786499999999999, + 0.329336, + 0.524165, + 0.662985, + 0.7509600000000001, + 0.7790929999999999, + 0.731245, + 0.706564, + 0.601442, + 0.45377999999999996, + 0.251438, + 0.057115, + 0.013441000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020297, + 0.103196, + 0.310813, + 0.49312900000000004, + 0.615524, + 0.6908529999999999, + 0.721373, + 0.705028, + 0.6469, + 0.546747, + 0.417009, + 0.238565, + 0.055630000000000006, + 0.014894000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021984, + 0.10004600000000001, + 0.301289, + 0.476923, + 0.600129, + 0.6742630000000001, + 0.7013550000000001, + 0.6875439999999999, + 0.6399969999999999, + 0.553538, + 0.422827, + 0.239673, + 0.058202, + 0.014279, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020905, + 0.096807, + 0.29156, + 0.46563099999999996, + 0.595129, + 0.68424, + 0.727169, + 0.724508, + 0.676852, + 0.579286, + 0.438503, + 0.246951, + 0.058277, + 0.014452999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020978, + 0.103711, + 0.30124900000000004, + 0.492296, + 0.60519, + 0.691808, + 0.756122, + 0.749417, + 0.693576, + 0.59278, + 0.446956, + 0.251482, + 0.059522, + 0.016097999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024692, + 0.101509, + 0.306178, + 0.486923, + 0.61805, + 0.706105, + 0.746726, + 0.740161, + 0.685342, + 0.58361, + 0.440013, + 0.247858, + 0.05823, + 0.015413999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022692, + 0.099591, + 0.301002, + 0.475352, + 0.5918049999999999, + 0.65971, + 0.677968, + 0.6659660000000001, + 0.631185, + 0.552614, + 0.422991, + 0.240372, + 0.062121, + 0.016402999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0237, + 0.097289, + 0.289606, + 0.455368, + 0.58065, + 0.666376, + 0.7064539999999999, + 0.702767, + 0.653768, + 0.559735, + 0.418342, + 0.237709, + 0.06417199999999999, + 0.015298, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022382000000000003, + 0.094915, + 0.292767, + 0.47190899999999997, + 0.603071, + 0.690392, + 0.73129, + 0.726989, + 0.676063, + 0.57801, + 0.43747, + 0.248535, + 0.060649, + 0.015957000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02445, + 0.098259, + 0.294391, + 0.469688, + 0.592923, + 0.667273, + 0.693997, + 0.684228, + 0.640695, + 0.555057, + 0.424647, + 0.243791, + 0.06313, + 0.017103999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023622, + 0.096822, + 0.293751, + 0.468892, + 0.587795, + 0.6554, + 0.683688, + 0.675655, + 0.635104, + 0.55223, + 0.422313, + 0.24165899999999998, + 0.064717, + 0.017035, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028225999999999998, + 0.101655, + 0.285871, + 0.454168, + 0.573444, + 0.655255, + 0.696434, + 0.694153, + 0.6463289999999999, + 0.549381, + 0.419748, + 0.23971199999999998, + 0.063885, + 0.016486, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023583, + 0.096449, + 0.28380700000000003, + 0.455216, + 0.573911, + 0.652087, + 0.6845330000000001, + 0.682194, + 0.640356, + 0.5502910000000001, + 0.41918900000000003, + 0.239277, + 0.062779, + 0.015814, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023014, + 0.09371800000000001, + 0.288, + 0.461893, + 0.587114, + 0.6716599999999999, + 0.712399, + 0.70778, + 0.658431, + 0.564304, + 0.429375, + 0.24572, + 0.061926, + 0.016263000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020762, + 0.089423, + 0.283757, + 0.455029, + 0.577249, + 0.66112, + 0.701744, + 0.6999059999999999, + 0.653766, + 0.561375, + 0.427478, + 0.24587399999999998, + 0.062351, + 0.016157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019960000000000002, + 0.08870600000000001, + 0.281314, + 0.450772, + 0.571198, + 0.638492, + 0.6862569999999999, + 0.6919109999999999, + 0.647716, + 0.558225, + 0.414401, + 0.236504, + 0.062818, + 0.015049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021803999999999997, + 0.088122, + 0.247201, + 0.406413, + 0.56886, + 0.650404, + 0.6825370000000001, + 0.679723, + 0.563136, + 0.500325, + 0.372995, + 0.20285599999999998, + 0.066905, + 0.016215, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022018999999999997, + 0.091596, + 0.25647699999999996, + 0.41759199999999996, + 0.541029, + 0.6669039999999999, + 0.686589, + 0.666661, + 0.650298, + 0.572316, + 0.436123, + 0.251766, + 0.063527, + 0.015615, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021318, + 0.08708199999999999, + 0.267414, + 0.42529, + 0.5441609999999999, + 0.626165, + 0.666723, + 0.662829, + 0.616031, + 0.339106, + 0.200223, + 0.23109100000000002, + 0.06683599999999999, + 0.017179, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020723, + 0.08841800000000001, + 0.269378, + 0.438927, + 0.559154, + 0.644154, + 0.684859, + 0.684685, + 0.639729, + 0.550276, + 0.418878, + 0.241939, + 0.066716, + 0.016861, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02183, + 0.09173, + 0.287225, + 0.468626, + 0.6022029999999999, + 0.695561, + 0.7390030000000001, + 0.7332150000000001, + 0.6812, + 0.583902, + 0.443425, + 0.255988, + 0.065438, + 0.016097, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023462, + 0.093066, + 0.29536399999999996, + 0.474477, + 0.594953, + 0.6665639999999999, + 0.7020639999999999, + 0.7018, + 0.660861, + 0.5749460000000001, + 0.441888, + 0.256538, + 0.065402, + 0.015889, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019271, + 0.085837, + 0.282464, + 0.453672, + 0.570973, + 0.655236, + 0.700911, + 0.703828, + 0.6606449999999999, + 0.5709890000000001, + 0.43703800000000004, + 0.255383, + 0.062399, + 0.012121999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015525, + 0.083098, + 0.29074500000000003, + 0.471264, + 0.5941620000000001, + 0.666476, + 0.706287, + 0.70486, + 0.659653, + 0.572145, + 0.440029, + 0.256063, + 0.063881, + 0.012581, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015458, + 0.08371899999999999, + 0.292272, + 0.476039, + 0.604306, + 0.686845, + 0.728879, + 0.7254980000000001, + 0.67747, + 0.5848369999999999, + 0.449019, + 0.26106999999999997, + 0.06397800000000001, + 0.012060000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014923, + 0.084548, + 0.290361, + 0.467714, + 0.5809439999999999, + 0.650807, + 0.6858609999999999, + 0.683898, + 0.6411330000000001, + 0.556585, + 0.430581, + 0.250658, + 0.061438, + 0.011205999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014752000000000001, + 0.083088, + 0.27992, + 0.444704, + 0.5475570000000001, + 0.625011, + 0.542512, + 0.667587, + 0.604707, + 0.522306, + 0.39812200000000003, + 0.23974299999999998, + 0.070262, + 0.016050000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019957, + 0.08533299999999999, + 0.259551, + 0.423283, + 0.541607, + 0.622212, + 0.660265, + 0.6567609999999999, + 0.54818, + 0.537731, + 0.411678, + 0.23780500000000002, + 0.06890500000000001, + 0.016466, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025300999999999997, + 0.09675199999999999, + 0.255707, + 0.41941199999999995, + 0.539602, + 0.62264, + 0.666414, + 0.576126, + 0.5447540000000001, + 0.5365270000000001, + 0.409919, + 0.239778, + 0.07345600000000001, + 0.018277, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019161, + 0.084047, + 0.268942, + 0.444732, + 0.5724629999999999, + 0.661275, + 0.7041689999999999, + 0.70201, + 0.660876, + 0.569911, + 0.435745, + 0.252776, + 0.063846, + 0.012654, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015596, + 0.079602, + 0.275878, + 0.45825099999999996, + 0.589977, + 0.67836, + 0.722074, + 0.720493, + 0.672778, + 0.578997, + 0.444415, + 0.26076299999999997, + 0.067411, + 0.012289999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017902, + 0.08257099999999999, + 0.270924, + 0.444865, + 0.567483, + 0.652158, + 0.696374, + 0.695039, + 0.651436, + 0.561582, + 0.424255, + 0.250003, + 0.07804000000000001, + 0.018463, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018394999999999998, + 0.068333, + 0.220519, + 0.175357, + 0.488813, + 0.5133110000000001, + 0.460078, + 0.499653, + 0.469571, + 0.257116, + 0.33198200000000005, + 0.214376, + 0.07343000000000001, + 0.016293, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021617, + 0.090007, + 0.274323, + 0.458315, + 0.594495, + 0.6940109999999999, + 0.738758, + 0.733101, + 0.686984, + 0.594563, + 0.45626, + 0.266219, + 0.068632, + 0.011840999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01468, + 0.080611, + 0.280236, + 0.462341, + 0.589976, + 0.675434, + 0.718328, + 0.716052, + 0.672102, + 0.582233, + 0.447535, + 0.260158, + 0.066204, + 0.011064000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013564, + 0.076969, + 0.277999, + 0.457399, + 0.5802609999999999, + 0.661036, + 0.704718, + 0.7014779999999999, + 0.6572060000000001, + 0.568141, + 0.435956, + 0.254136, + 0.065755, + 0.012052, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004628, + 0.061717, + 0.216007, + 0.33203699999999997, + 0.42419799999999996, + 0.289919, + 0.37951999999999997, + 0.38125400000000004, + 0.440322, + 0.519638, + 0.40256200000000003, + 0.244771, + 0.06940600000000001, + 0.013007, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006535, + 0.07380400000000001, + 0.255538, + 0.424486, + 0.547668, + 0.634656, + 0.677077, + 0.6764690000000001, + 0.630222, + 0.5471079999999999, + 0.417806, + 0.242733, + 0.07062, + 0.012983, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014478, + 0.07508100000000001, + 0.262874, + 0.43830399999999997, + 0.5662290000000001, + 0.654087, + 0.698203, + 0.696646, + 0.653809, + 0.564929, + 0.434158, + 0.254848, + 0.066488, + 0.011514, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012667, + 0.076346, + 0.274509, + 0.455258, + 0.582511, + 0.6675209999999999, + 0.7111559999999999, + 0.708902, + 0.66218, + 0.572129, + 0.439625, + 0.257841, + 0.06777, + 0.011583999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012127, + 0.076393, + 0.277362, + 0.46061799999999997, + 0.592174, + 0.6805739999999999, + 0.726029, + 0.722896, + 0.675523, + 0.581646, + 0.44487400000000005, + 0.26032799999999995, + 0.065473, + 0.009749, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011498, + 0.07521800000000001, + 0.274161, + 0.456083, + 0.587598, + 0.680817, + 0.7278600000000001, + 0.726917, + 0.681245, + 0.589383, + 0.453366, + 0.267001, + 0.06622499999999999, + 0.009749, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011549, + 0.074517, + 0.2769, + 0.457709, + 0.589566, + 0.681406, + 0.726542, + 0.724599, + 0.6802590000000001, + 0.58536, + 0.448698, + 0.26376900000000003, + 0.067418, + 0.009707, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012029, + 0.076544, + 0.271383, + 0.451926, + 0.581679, + 0.670462, + 0.713649, + 0.708481, + 0.665903, + 0.5729829999999999, + 0.437997, + 0.255859, + 0.067228, + 0.010731, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013194, + 0.075078, + 0.25977100000000003, + 0.43105099999999996, + 0.55522, + 0.641657, + 0.685635, + 0.681661, + 0.637246, + 0.5495599999999999, + 0.41673899999999997, + 0.24327600000000002, + 0.066526, + 0.006848, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0012720000000000001, + 0.051014000000000004, + 0.056789, + 0.052455, + 0.5478500000000001, + 0.551359, + 0.6499729999999999, + 0.049083, + 0.15639699999999998, + 0.13254, + 0.016735, + 0.07085, + 0.011986, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012169000000000001, + 0.07522, + 0.255774, + 0.424952, + 0.550921, + 0.641629, + 0.687348, + 0.687721, + 0.644226, + 0.557498, + 0.42799, + 0.251089, + 0.067396, + 0.009917, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010538, + 0.072035, + 0.265319, + 0.443202, + 0.572061, + 0.6619149999999999, + 0.7073039999999999, + 0.705715, + 0.664263, + 0.572346, + 0.438365, + 0.253925, + 0.06802899999999999, + 0.009911, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010423, + 0.07245900000000001, + 0.266138, + 0.44423599999999996, + 0.572506, + 0.657473, + 0.702114, + 0.7038260000000001, + 0.66013, + 0.571194, + 0.439668, + 0.25635, + 0.067789, + 0.009155, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010912000000000002, + 0.073114, + 0.260879, + 0.435747, + 0.562297, + 0.6522519999999999, + 0.696553, + 0.6945979999999999, + 0.653941, + 0.563513, + 0.43092, + 0.251074, + 0.06714700000000001, + 0.008439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010995, + 0.075171, + 0.26406999999999997, + 0.44027, + 0.5679379999999999, + 0.654803, + 0.697816, + 0.6970270000000001, + 0.655087, + 0.565827, + 0.433409, + 0.251974, + 0.066898, + 0.008345, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009736, + 0.074, + 0.26538, + 0.442835, + 0.570096, + 0.654072, + 0.698145, + 0.6958529999999999, + 0.646836, + 0.559742, + 0.430479, + 0.25247800000000004, + 0.065444, + 0.007019999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009629, + 0.074934, + 0.265065, + 0.44109699999999996, + 0.5665549999999999, + 0.653421, + 0.6977380000000001, + 0.696757, + 0.657166, + 0.566136, + 0.433302, + 0.252695, + 0.066535, + 0.006828, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00895, + 0.075384, + 0.26143099999999997, + 0.436389, + 0.559781, + 0.646471, + 0.6892780000000001, + 0.686742, + 0.641418, + 0.54957, + 0.417097, + 0.245817, + 0.06964100000000001, + 0.005979, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.042686, + 0.006637, + 0.358203, + 0.5673680000000001, + 0.577245, + 0.607641, + 0.615478, + 0.648558, + 0.562297, + 0.42758999999999997, + 0.24985, + 0.067526, + 0.005753, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008407, + 0.07680100000000001, + 0.262219, + 0.436562, + 0.561754, + 0.6511950000000001, + 0.7001710000000001, + 0.7014790000000001, + 0.655922, + 0.5700940000000001, + 0.4355, + 0.25629599999999997, + 0.06561199999999999, + 0.005293999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007109, + 0.07395399999999999, + 0.270024, + 0.446108, + 0.570472, + 0.656852, + 0.6969310000000001, + 0.696861, + 0.655416, + 0.566506, + 0.433398, + 0.252085, + 0.06474099999999999, + 0.004791999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006857, + 0.077874, + 0.265974, + 0.44231099999999995, + 0.5708730000000001, + 0.656091, + 0.7010040000000001, + 0.697132, + 0.504191, + 0.559731, + 0.42486900000000005, + 0.248596, + 0.070513, + 0.004543999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006601, + 0.08469499999999999, + 0.266532, + 0.445038, + 0.580115, + 0.672755, + 0.7217039999999999, + 0.7242799999999999, + 0.6750069999999999, + 0.584368, + 0.44479199999999997, + 0.262043, + 0.06742400000000001, + 0.004683, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0069370000000000005, + 0.080025, + 0.289116, + 0.483524, + 0.624478, + 0.7229500000000001, + 0.7694099999999999, + 0.7636839999999999, + 0.714212, + 0.6133350000000001, + 0.466629, + 0.26996699999999996, + 0.06569799999999999, + 0.003277, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004882, + 0.07692600000000001, + 0.287098, + 0.476315, + 0.612769, + 0.7035359999999999, + 0.751235, + 0.7493329999999999, + 0.698535, + 0.600611, + 0.45809, + 0.266259, + 0.064384, + 0.00329, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004844, + 0.077888, + 0.289605, + 0.476438, + 0.608678, + 0.6937300000000001, + 0.7425309999999999, + 0.7443339999999999, + 0.697496, + 0.6019070000000001, + 0.460738, + 0.26852800000000004, + 0.064038, + 0.0027730000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004318, + 0.077015, + 0.287494, + 0.47453500000000004, + 0.6097899999999999, + 0.701236, + 0.749715, + 0.751082, + 0.701121, + 0.60526, + 0.461826, + 0.269077, + 0.065229, + 0.00283, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003803, + 0.07689700000000001, + 0.286003, + 0.47014, + 0.605211, + 0.6969740000000001, + 0.745189, + 0.746537, + 0.697662, + 0.602155, + 0.46024400000000004, + 0.266986, + 0.062581, + 0.003162, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004367, + 0.077557, + 0.284992, + 0.474109, + 0.615112, + 0.708534, + 0.7551939999999999, + 0.75049, + 0.702862, + 0.6033419999999999, + 0.45904199999999995, + 0.264962, + 0.061602, + 0.002662, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003832, + 0.075235, + 0.275488, + 0.455628, + 0.587604, + 0.6755890000000001, + 0.717346, + 0.713549, + 0.667135, + 0.5699740000000001, + 0.432887, + 0.250701, + 0.0577, + 0.002069, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003766, + 0.07469799999999999, + 0.273005, + 0.452291, + 0.5791580000000001, + 0.667019, + 0.712179, + 0.710818, + 0.666808, + 0.573551, + 0.436599, + 0.249812, + 0.056856000000000004, + 0.0015509999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0032890000000000003, + 0.07414799999999999, + 0.270334, + 0.445384, + 0.552289, + 0.5316029999999999, + 0.7093079999999999, + 0.705339, + 0.5526380000000001, + 0.41850299999999996, + 0.377523, + 0.227534, + 0.056715, + 0.0005600000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002543, + 0.076658, + 0.269613, + 0.44653699999999996, + 0.5740080000000001, + 0.6577200000000001, + 0.701564, + 0.700024, + 0.653627, + 0.563628, + 0.423556, + 0.235727, + 0.062078, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002186, + 0.077586, + 0.26826799999999995, + 0.442486, + 0.5668179999999999, + 0.646841, + 0.69008, + 0.687998, + 0.640653, + 0.549154, + 0.410123, + 0.229373, + 0.060127, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00273, + 0.076699, + 0.267375, + 0.44297699999999995, + 0.5698920000000001, + 0.661606, + 0.705661, + 0.705322, + 0.6602140000000001, + 0.568335, + 0.427339, + 0.24024700000000002, + 0.058287, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0027280000000000004, + 0.07608, + 0.275271, + 0.45746800000000004, + 0.589716, + 0.6823490000000001, + 0.7283350000000001, + 0.7277619999999999, + 0.678284, + 0.581177, + 0.441774, + 0.250563, + 0.054793, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003267, + 0.073828, + 0.28688400000000003, + 0.47397500000000004, + 0.5482400000000001, + 0.703952, + 0.680172, + 0.745155, + 0.694793, + 0.593942, + 0.449212, + 0.254136, + 0.053938, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0023250000000000002, + 0.08029399999999999, + 0.29437, + 0.480045, + 0.611919, + 0.6984199999999999, + 0.74415, + 0.743555, + 0.689866, + 0.591361, + 0.446406, + 0.250798, + 0.052543999999999993, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.001758, + 0.07896500000000001, + 0.287109, + 0.471032, + 0.602951, + 0.687862, + 0.727938, + 0.72372, + 0.6741090000000001, + 0.575817, + 0.434733, + 0.241907, + 0.053357999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.001286, + 0.07777500000000001, + 0.286416, + 0.471769, + 0.6054189999999999, + 0.694309, + 0.735928, + 0.727256, + 0.6796810000000001, + 0.578447, + 0.433556, + 0.242729, + 0.051383000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.001369, + 0.08148000000000001, + 0.296375, + 0.487702, + 0.627654, + 0.718278, + 0.7641939999999999, + 0.757818, + 0.703286, + 0.60054, + 0.45319, + 0.253834, + 0.051377, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.000859, + 0.080983, + 0.2911, + 0.471852, + 0.60568, + 0.695742, + 0.7391939999999999, + 0.733955, + 0.686178, + 0.5850270000000001, + 0.43987200000000004, + 0.245218, + 0.049717, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00028599999999999996, + 0.077226, + 0.27174200000000004, + 0.453347, + 0.5882200000000001, + 0.679154, + 0.724007, + 0.722152, + 0.5730299999999999, + 0.487927, + 0.360096, + 0.226899, + 0.049052, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.077318, + 0.264808, + 0.40756200000000004, + 0.515223, + 0.66592, + 0.607734, + 0.565789, + 0.560976, + 0.142279, + 0.086342, + 0.200441, + 0.049277, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076251, + 0.272393, + 0.449427, + 0.579801, + 0.672975, + 0.71786, + 0.713912, + 0.6656839999999999, + 0.569961, + 0.42335300000000003, + 0.23199899999999998, + 0.044802999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076772, + 0.280738, + 0.450853, + 0.573722, + 0.6623049999999999, + 0.707663, + 0.705832, + 0.6583089999999999, + 0.561391, + 0.421406, + 0.22975, + 0.042415, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.077394, + 0.27872399999999997, + 0.442267, + 0.561292, + 0.64067, + 0.6759550000000001, + 0.672164, + 0.629779, + 0.372318, + 0.23221899999999998, + 0.200868, + 0.043741999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034484, + 0.27456400000000003, + 0.448955, + 0.577234, + 0.671217, + 0.71621, + 0.711653, + 0.298404, + 0.02838, + 0.41194, + 0.052028, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076614, + 0.263334, + 0.428958, + 0.5518200000000001, + 0.6457390000000001, + 0.6840839999999999, + 0.680338, + 0.635049, + 0.47165300000000004, + 0.346009, + 0.23098500000000002, + 0.041799, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08293099999999999, + 0.294332, + 0.46803500000000003, + 0.599711, + 0.687917, + 0.73317, + 0.731445, + 0.679921, + 0.578455, + 0.429896, + 0.229972, + 0.040606, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08349899999999999, + 0.297692, + 0.465627, + 0.579393, + 0.6691670000000001, + 0.7122809999999999, + 0.168298, + 0.017440999999999998, + 0.013486000000000001, + 0.421836, + 0.224774, + 0.038871, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081165, + 0.288803, + 0.466765, + 0.597967, + 0.684778, + 0.724682, + 0.716654, + 0.226055, + 0.181448, + 0.041783, + 0.153233, + 0.039250999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081596, + 0.291173, + 0.464038, + 0.594292, + 0.679375, + 0.71565, + 0.705945, + 0.651207, + 0.550168, + 0.405345, + 0.21164, + 0.037613999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08039400000000001, + 0.28363900000000003, + 0.459699, + 0.584056, + 0.667556, + 0.702353, + 0.6923400000000001, + 0.638196, + 0.541066, + 0.145143, + 0.208316, + 0.01642, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08083, + 0.283387, + 0.463325, + 0.590157, + 0.680508, + 0.722025, + 0.717405, + 0.66488, + 0.562855, + 0.411295, + 0.21374600000000002, + 0.03362, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.082058, + 0.28736700000000004, + 0.46560700000000005, + 0.596176, + 0.68714, + 0.729155, + 0.724485, + 0.673636, + 0.5631029999999999, + 0.405323, + 0.208385, + 0.032292, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08783400000000001, + 0.31195, + 0.506901, + 0.6445839999999999, + 0.73576, + 0.7751140000000001, + 0.764851, + 0.711467, + 0.599876, + 0.44211900000000004, + 0.225365, + 0.033305, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.089965, + 0.31704000000000004, + 0.515319, + 0.655404, + 0.74751, + 0.789505, + 0.775277, + 0.714527, + 0.602128, + 0.442338, + 0.226978, + 0.031569, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.088021, + 0.30609699999999995, + 0.48977800000000005, + 0.623915, + 0.720404, + 0.764923, + 0.757652, + 0.699528, + 0.592502, + 0.437656, + 0.22398300000000002, + 0.029422, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08673399999999999, + 0.308907, + 0.49097, + 0.621409, + 0.7063680000000001, + 0.737344, + 0.716649, + 0.64995, + 0.544202, + 0.404028, + 0.208511, + 0.026652000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08402, + 0.301133, + 0.480499, + 0.6047809999999999, + 0.68675, + 0.717307, + 0.698774, + 0.63093, + 0.533446, + 0.393503, + 0.200775, + 0.026053999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081199, + 0.29427499999999995, + 0.474688, + 0.604115, + 0.688973, + 0.729838, + 0.7273890000000001, + 0.6664990000000001, + 0.553592, + 0.39467, + 0.180597, + 0.020611, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076186, + 0.26887700000000003, + 0.450653, + 0.59403, + 0.706471, + 0.744642, + 0.735173, + 0.677592, + 0.555531, + 0.383541, + 0.198412, + 0.023417999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.091524, + 0.326945, + 0.5356449999999999, + 0.687071, + 0.792531, + 0.833333, + 0.819292, + 0.752477, + 0.626927, + 0.454283, + 0.22625, + 0.023404, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.097609, + 0.345224, + 0.551808, + 0.705429, + 0.801021, + 0.833333, + 0.8246079999999999, + 0.751374, + 0.628577, + 0.459171, + 0.227413, + 0.02209, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096786, + 0.33986500000000003, + 0.5428869999999999, + 0.6872140000000001, + 0.780438, + 0.816801, + 0.795639, + 0.726172, + 0.607062, + 0.441548, + 0.22045599999999999, + 0.018767, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094247, + 0.32894, + 0.517535, + 0.649841, + 0.731229, + 0.762368, + 0.7442329999999999, + 0.677188, + 0.572231, + 0.420319, + 0.20741900000000002, + 0.015727, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08742799999999999, + 0.306751, + 0.5035149999999999, + 0.651353, + 0.749309, + 0.791015, + 0.781106, + 0.71594, + 0.602262, + 0.430803, + 0.20699299999999998, + 0.013266, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094812, + 0.334854, + 0.532556, + 0.669088, + 0.7520560000000001, + 0.781653, + 0.759274, + 0.6891799999999999, + 0.576434, + 0.417296, + 0.205063, + 0.011842, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.092682, + 0.322262, + 0.509454, + 0.649606, + 0.738998, + 0.7787350000000001, + 0.764912, + 0.694447, + 0.5777490000000001, + 0.41013299999999997, + 0.192739, + 0.010324, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.080023, + 0.28840499999999997, + 0.47956, + 0.632268, + 0.751885, + 0.798491, + 0.787661, + 0.720281, + 0.602485, + 0.435154, + 0.206253, + 0.01056, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096716, + 0.343882, + 0.549614, + 0.697564, + 0.789918, + 0.826779, + 0.8064600000000001, + 0.733641, + 0.609169, + 0.435505, + 0.203543, + 0.009023999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096266, + 0.339086, + 0.5392680000000001, + 0.681166, + 0.767297, + 0.799513, + 0.7754840000000001, + 0.7032430000000001, + 0.582318, + 0.417617, + 0.19570300000000002, + 0.007417, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09411, + 0.336858, + 0.532257, + 0.670243, + 0.757509, + 0.788704, + 0.7645890000000001, + 0.691678, + 0.575564, + 0.412901, + 0.191941, + 0.005817, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08748, + 0.314267, + 0.49972300000000003, + 0.633547, + 0.727117, + 0.766744, + 0.754402, + 0.6947380000000001, + 0.5796520000000001, + 0.41447300000000004, + 0.18912700000000002, + 0.004798, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094654, + 0.330827, + 0.517004, + 0.650887, + 0.7343569999999999, + 0.7672720000000001, + 0.74859, + 0.684762, + 0.571964, + 0.409229, + 0.186581, + 0.003675, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06918600000000001, + 0.284687, + 0.40991500000000003, + 0.6516810000000001, + 0.640837, + 0.597262, + 0.620324, + 0.42395900000000003, + 0.189798, + 0.412403, + 0.186075, + 0.0025510000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08379099999999999, + 0.308387, + 0.490259, + 0.6198830000000001, + 0.64715, + 0.6772400000000001, + 0.649732, + 0.556929, + 0.403734, + 0.26719099999999996, + 0.08055200000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.084813, + 0.312623, + 0.5021209999999999, + 0.5615220000000001, + 0.656464, + 0.612754, + 0.351671, + 0.45055399999999995, + 0.251888, + 0.266644, + 0.040715, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.087385, + 0.312525, + 0.487219, + 0.6231180000000001, + 0.711661, + 0.750903, + 0.741106, + 0.675552, + 0.55799, + 0.392288, + 0.170631, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.039078, + 0.274578, + 0.494924, + 0.6267699999999999, + 0.715075, + 0.753089, + 0.741706, + 0.6765410000000001, + 0.557902, + 0.39205900000000005, + 0.169608, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.084552, + 0.315007, + 0.508853, + 0.64604, + 0.7403930000000001, + 0.776867, + 0.7648550000000001, + 0.692774, + 0.5699529999999999, + 0.393096, + 0.165522, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07907800000000001, + 0.319609, + 0.526711, + 0.677661, + 0.7681330000000001, + 0.805468, + 0.7878200000000001, + 0.71602, + 0.420351, + 0.269385, + 0.009849, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.069745, + 0.046383, + 0.211787, + 0.6891079999999999, + 0.34262400000000004, + 0.81826, + 0.7984629999999999, + 0.129915, + 0.198302, + 0.41850400000000004, + 0.002156, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09232800000000001, + 0.35337999999999997, + 0.562568, + 0.7093590000000001, + 0.797221, + 0.832553, + 0.08744299999999999, + 0.216433, + 0.010967000000000001, + 0.017209, + 0.08956, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09317700000000001, + 0.347765, + 0.557428, + 0.698462, + 0.782534, + 0.811904, + 0.7856069999999999, + 0.7065560000000001, + 0.583272, + 0.400089, + 0.162653, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08865300000000001, + 0.337718, + 0.541632, + 0.6783490000000001, + 0.763695, + 0.790509, + 0.767128, + 0.694002, + 0.57304, + 0.401406, + 0.162493, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.088395, + 0.339119, + 0.5344800000000001, + 0.667239, + 0.7358049999999999, + 0.752885, + 0.729962, + 0.663695, + 0.55055, + 0.38830000000000003, + 0.158317, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.083626, + 0.328098, + 0.5205839999999999, + 0.657128, + 0.6154310000000001, + 0.633888, + 0.751035, + 0.675605, + 0.547004, + 0.36993, + 0.144755, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08204900000000001, + 0.32782799999999995, + 0.529906, + 0.665727, + 0.744328, + 0.769812, + 0.7462770000000001, + 0.672236, + 0.5512440000000001, + 0.37904000000000004, + 0.14527400000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.084373, + 0.334637, + 0.531218, + 0.670381, + 0.751812, + 0.781566, + 0.759664, + 0.684359, + 0.55765, + 0.382878, + 0.14928899999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08333, + 0.333183, + 0.526046, + 0.6566219999999999, + 0.729096, + 0.74574, + 0.712372, + 0.6402559999999999, + 0.5327999999999999, + 0.372125, + 0.14454599999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08132500000000001, + 0.321942, + 0.505543, + 0.531186, + 0.628436, + 0.728611, + 0.622981, + 0.5122709999999999, + 0.539091, + 0.316109, + 0.12946100000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.069771, + 0.281949, + 0.479825, + 0.622484, + 0.703116, + 0.735587, + 0.7170890000000001, + 0.6619210000000001, + 0.540678, + 0.361514, + 0.121517, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.073994, + 0.316137, + 0.509618, + 0.645105, + 0.7344579999999999, + 0.77101, + 0.752058, + 0.68022, + 0.556929, + 0.37499400000000005, + 0.132066, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07506600000000001, + 0.329903, + 0.5288189999999999, + 0.669962, + 0.75436, + 0.7805460000000001, + 0.7505259999999999, + 0.669593, + 0.546274, + 0.367042, + 0.129351, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07594799999999999, + 0.33469600000000005, + 0.5404629999999999, + 0.678221, + 0.759999, + 0.784149, + 0.753497, + 0.6700839999999999, + 0.548381, + 0.37117, + 0.12865000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067917, + 0.32844, + 0.523242, + 0.649293, + 0.737413, + 0.774697, + 0.7590779999999999, + 0.6829489999999999, + 0.558019, + 0.373231, + 0.116453, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.060235, + 0.321887, + 0.522903, + 0.66134, + 0.7388239999999999, + 0.764106, + 0.7355839999999999, + 0.663938, + 0.5459700000000001, + 0.36623, + 0.10873999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.055192, + 0.318624, + 0.520471, + 0.655613, + 0.725698, + 0.745539, + 0.716071, + 0.647002, + 0.527909, + 0.35341, + 0.107935, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.051723, + 0.322864, + 0.528386, + 0.6661549999999999, + 0.751287, + 0.780913, + 0.755735, + 0.678964, + 0.55192, + 0.365546, + 0.120102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04988, + 0.323188, + 0.529798, + 0.662609, + 0.742851, + 0.768439, + 0.738955, + 0.663066, + 0.5391330000000001, + 0.357768, + 0.110888, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03703, + 0.290132, + 0.492291, + 0.634021, + 0.723682, + 0.7520650000000001, + 0.7258680000000001, + 0.579526, + 0.273806, + 0.19725499999999999, + 0.050616999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033932000000000004, + 0.28628899999999996, + 0.491966, + 0.643153, + 0.7302569999999999, + 0.76287, + 0.7335119999999999, + 0.6533869999999999, + 0.505711, + 0.309961, + 0.078503, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033249, + 0.2959, + 0.519744, + 0.67773, + 0.7724869999999999, + 0.815714, + 0.7995950000000001, + 0.7221029999999999, + 0.590255, + 0.386684, + 0.11690900000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040188, + 0.340798, + 0.563101, + 0.707622, + 0.7927329999999999, + 0.816487, + 0.784709, + 0.70663, + 0.574032, + 0.383591, + 0.11746899999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037425, + 0.33852899999999997, + 0.55747, + 0.701844, + 0.784769, + 0.807535, + 0.775019, + 0.688376, + 0.556468, + 0.36551999999999996, + 0.107404, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.032839, + 0.327946, + 0.5421180000000001, + 0.678649, + 0.763641, + 0.78828, + 0.7606620000000001, + 0.679907, + 0.549496, + 0.357584, + 0.10004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030358, + 0.32491699999999996, + 0.5375639999999999, + 0.671922, + 0.7458400000000001, + 0.76644, + 0.735885, + 0.440041, + 0.483379, + 0.275113, + 0.093996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028457999999999997, + 0.31888099999999997, + 0.5279360000000001, + 0.477634, + 0.716495, + 0.747712, + 0.729763, + 0.6608529999999999, + 0.540621, + 0.351203, + 0.030073, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024170999999999998, + 0.312137, + 0.5279980000000001, + 0.685941, + 0.667825, + 0.449124, + 0.31792899999999996, + 0.68565, + 0.390001, + 0.32025099999999995, + 0.066684, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013835, + 0.29871800000000004, + 0.518872, + 0.66926, + 0.7559130000000001, + 0.779464, + 0.752802, + 0.683199, + 0.5535869999999999, + 0.36177699999999996, + 0.089503, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01821, + 0.33626799999999996, + 0.559174, + 0.71211, + 0.802959, + 0.8321660000000001, + 0.800361, + 0.714853, + 0.570804, + 0.370468, + 0.085726, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015080999999999999, + 0.324504, + 0.5412089999999999, + 0.690302, + 0.7776810000000001, + 0.805843, + 0.776123, + 0.692526, + 0.556356, + 0.351922, + 0.07431, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010805, + 0.305906, + 0.522848, + 0.667957, + 0.755856, + 0.78654, + 0.75751, + 0.67748, + 0.53965, + 0.347092, + 0.07054200000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008667, + 0.299342, + 0.515717, + 0.65528, + 0.7360789999999999, + 0.757438, + 0.728174, + 0.651712, + 0.526399, + 0.344615, + 0.068788, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007969, + 0.300274, + 0.5095810000000001, + 0.64179, + 0.71697, + 0.747503, + 0.725487, + 0.652981, + 0.524933, + 0.338949, + 0.065881, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003077, + 0.293784, + 0.507337, + 0.6458579999999999, + 0.726481, + 0.749827, + 0.718604, + 0.641595, + 0.5127200000000001, + 0.32316500000000004, + 0.05602, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004224, + 0.28614999999999996, + 0.496679, + 0.615192, + 0.6905309999999999, + 0.732201, + 0.5296420000000001, + 0.648601, + 0.522007, + 0.328353, + 0.057686999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.293768, + 0.513991, + 0.65822, + 0.751837, + 0.7826000000000001, + 0.758028, + 0.6754779999999999, + 0.5398780000000001, + 0.336031, + 0.054354999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.229303, + 0.454669, + 0.621816, + 0.727923, + 0.759908, + 0.73499, + 0.443108, + 0.496525, + 0.293755, + 0.002265, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.231903, + 0.28092700000000004, + 0.624068, + 0.724563, + 0.759909, + 0.738721, + 0.664337, + 0.5331269999999999, + 0.334949, + 0.055779, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10041599999999999, + 0.287881, + 0.632407, + 0.721325, + 0.6127100000000001, + 0.517942, + 0.416767, + 0.369634, + 0.20540899999999998, + 0.002205, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020344, + 0.48115800000000003, + 0.388367, + 0.734931, + 0.7734249999999999, + 0.754199, + 0.677771, + 0.542781, + 0.335702, + 0.01334, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.253521, + 0.485854, + 0.643393, + 0.736509, + 0.772089, + 0.7487659999999999, + 0.668156, + 0.529126, + 0.326788, + 0.044567999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.300174, + 0.5451849999999999, + 0.708502, + 0.80134, + 0.831197, + 0.799507, + 0.716394, + 0.575545, + 0.35889800000000005, + 0.053811, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.282563, + 0.5187430000000001, + 0.6723830000000001, + 0.7659579999999999, + 0.7958310000000001, + 0.768602, + 0.682907, + 0.547088, + 0.278557, + 0.007331000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.099217, + 0.31859699999999996, + 0.6646989999999999, + 0.569653, + 0.64242, + 0.35803500000000005, + 0.25294300000000003, + 0.100123, + 0.273293, + 0.006157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.24607099999999998, + 0.228103, + 0.628096, + 0.493699, + 0.51686, + 0.16775800000000002, + 0.666389, + 0.530216, + 0.32371300000000003, + 0.033112, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.25875099999999995, + 0.48815, + 0.636755, + 0.732501, + 0.6356219999999999, + 0.505801, + 0.44678500000000004, + 0.198896, + 0.06913899999999999, + 0.00046800000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.248726, + 0.490769, + 0.6524070000000001, + 0.736359, + 0.764673, + 0.736735, + 0.655981, + 0.5230049999999999, + 0.321517, + 0.034885, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081214, + 0.309337, + 0.415222, + 0.717863, + 0.757005, + 0.734993, + 0.659292, + 0.52464, + 0.210478, + 0.006212, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.254383, + 0.515559, + 0.6748310000000001, + 0.774992, + 0.8111, + 0.7836989999999999, + 0.69948, + 0.555818, + 0.346985, + 0.006843, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08201800000000001, + 0.502087, + 0.658883, + 0.748788, + 0.78643, + 0.76538, + 0.689615, + 0.555316, + 0.347454, + 0.040917, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081954, + 0.500901, + 0.643764, + 0.722268, + 0.762445, + 0.7445320000000001, + 0.6681130000000001, + 0.5307050000000001, + 0.334155, + 0.039174999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.090297, + 0.492899, + 0.636746, + 0.7192200000000001, + 0.7378709999999999, + 0.7117279999999999, + 0.6460499999999999, + 0.5192469999999999, + 0.332792, + 0.042119, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.066106, + 0.268338, + 0.423965, + 0.5869800000000001, + 0.557567, + 0.5192140000000001, + 0.610062, + 0.5009089999999999, + 0.31441800000000003, + 0.031341, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067292, + 0.284527, + 0.6138920000000001, + 0.7181799999999999, + 0.763692, + 0.7462409999999999, + 0.6763239999999999, + 0.540089, + 0.343514, + 0.042225, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.20565, + 0.470835, + 0.629564, + 0.724308, + 0.766805, + 0.7465689999999999, + 0.6720280000000001, + 0.533674, + 0.124861, + 0.000423, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012541, + 0.146346, + 0.218701, + 0.009936, + 0.05912, + 0.021743, + 0.027427, + 0.080292, + 0.053134999999999995, + 0.033429, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.180511, + 0.44994999999999996, + 0.480558, + 0.563862, + 0.520109, + 0.564016, + 0.383623, + 0.13995500000000002, + 0.017038, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037923, + 0.082157, + 0.072137, + 0.117772, + 0.405541, + 0.387872, + 0.488442, + 0.374099, + 0.307741, + 0.012944, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.17328100000000002, + 0.003713, + 0.631733, + 0.353815, + 0.444603, + 0.492788, + 0.20970599999999998, + 0.004253, + 0.33504, + 0.003823, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.180171, + 0.48429099999999997, + 0.662058, + 0.762557, + 0.805327, + 0.7852169999999999, + 0.7080230000000001, + 0.56678, + 0.346855, + 0.004444, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.179709, + 0.46717000000000003, + 0.6276470000000001, + 0.7230850000000001, + 0.767178, + 0.5914020000000001, + 0.680023, + 0.360042, + 0.241241, + 0.028045999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.169067, + 0.47007499999999997, + 0.638692, + 0.7366739999999999, + 0.7774, + 0.7561380000000001, + 0.45593, + 0.5411459999999999, + 0.335918, + 0.031799, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.169875, + 0.48206099999999996, + 0.651482, + 0.7582770000000001, + 0.800237, + 0.777166, + 0.6993429999999999, + 0.558841, + 0.34334, + 0.032179, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.16505099999999998, + 0.486207, + 0.657125, + 0.6986079999999999, + 0.693381, + 0.7683150000000001, + 0.557194, + 0.553859, + 0.351525, + 0.036669, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.155145, + 0.461129, + 0.630808, + 0.735178, + 0.785512, + 0.777556, + 0.225082, + 0.15044300000000002, + 0.342557, + 0.03123, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.14418199999999998, + 0.458913, + 0.479303, + 0.380979, + 0.775091, + 0.023267, + 0.199731, + 0.066807, + 0.153915, + 0.022161, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.151681, + 0.470808, + 0.650428, + 0.7594529999999999, + 0.807166, + 0.788475, + 0.706433, + 0.5650510000000001, + 0.358124, + 0.038231, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.151543, + 0.478238, + 0.651402, + 0.758953, + 0.800665, + 0.7795639999999999, + 0.702674, + 0.56286, + 0.357308, + 0.041568, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.138708, + 0.210651, + 0.622953, + 0.716237, + 0.743563, + 0.734023, + 0.6681849999999999, + 0.5414829999999999, + 0.343507, + 0.038011, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.121145, + 0.23294, + 0.6289, + 0.5152709999999999, + 0.507863, + 0.473408, + 0.066858, + 0.39196, + 0.349071, + 0.0055899999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.134658, + 0.470459, + 0.6508379999999999, + 0.7654489999999999, + 0.8158200000000001, + 0.801414, + 0.72621, + 0.585942, + 0.377149, + 0.054387, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.138851, + 0.470574, + 0.6401760000000001, + 0.741839, + 0.781397, + 0.76232, + 0.691926, + 0.560845, + 0.364261, + 0.006595, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096102, + 0.065228, + 0.613275, + 0.5733469999999999, + 0.5743980000000001, + 0.753479, + 0.625656, + 0.558945, + 0.358668, + 0.052375, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.127584, + 0.465435, + 0.6368630000000001, + 0.740158, + 0.779592, + 0.761161, + 0.687929, + 0.5615610000000001, + 0.364584, + 0.050676, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.120866, + 0.450305, + 0.61999, + 0.69971, + 0.7320570000000001, + 0.727034, + 0.665661, + 0.537581, + 0.343251, + 0.040179, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038506, + 0.201413, + 0.30916899999999997, + 0.605852, + 0.767018, + 0.574845, + 0.710862, + 0.58084, + 0.374729, + 0.039710999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10720099999999999, + 0.422965, + 0.6094339999999999, + 0.7143740000000001, + 0.55702, + 0.755105, + 0.6869160000000001, + 0.557506, + 0.35659199999999996, + 0.051065, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10942400000000001, + 0.43626, + 0.6105119999999999, + 0.717865, + 0.7653110000000001, + 0.751, + 0.369433, + 0.453274, + 0.111301, + 0.002709, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.105634, + 0.425738, + 0.613294, + 0.71697, + 0.7653390000000001, + 0.7526849999999999, + 0.6871799999999999, + 0.494915, + 0.35642399999999996, + 0.012266, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.116429, + 0.469032, + 0.6505650000000001, + 0.7637849999999999, + 0.806976, + 0.625709, + 0.4617, + 0.37878500000000004, + 0.153164, + 0.005131999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.113733, + 0.463537, + 0.642828, + 0.749715, + 0.654027, + 0.691058, + 0.7094790000000001, + 0.580594, + 0.390424, + 0.07828199999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.103739, + 0.437002, + 0.6106699999999999, + 0.542218, + 0.577558, + 0.528649, + 0.43344900000000003, + 0.32770900000000003, + 0.155053, + 0.005602, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01668, + 0.11138200000000001, + 0.152782, + 0.324201, + 0.515428, + 0.602601, + 0.40186, + 0.209235, + 0.36279, + 0.017186, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006552, + 0.26812400000000003, + 0.430122, + 0.327291, + 0.139334, + 0.128154, + 0.035482, + 0.086597, + 0.082486, + 0.002897, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014361, + 0.005632, + 0.151531, + 0.07006399999999999, + 0.106531, + 0.040536, + 0.093756, + 0.394959, + 0.051283, + 0.06218, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081358, + 0.034476999999999994, + 0.218393, + 0.043686, + 0.13411199999999998, + 0.136252, + 0.114898, + 0.08026000000000001, + 0.081997, + 0.0038900000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.083077, + 0.396892, + 0.586102, + 0.714333, + 0.767248, + 0.553376, + 0.476887, + 0.574817, + 0.264644, + 0.10291, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "annual_energy_produced_kwh_bau": 71463.73, + "electric_to_load_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.295, + 17.556, + 26.273, + 48.938, + 61.118, + 55.855, + 45.968, + 31.371, + 7.937, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.839, + 18.257, + 27.039, + 30.854, + 30.078, + 40.563, + 46.492, + 31.885, + 0.563, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 18.613, + 28.064, + 32.519, + 31.809, + 26.589, + 48.014, + 33.359, + 8.571, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.074, + 18.555, + 27.555, + 31.268, + 30.453, + 47.058, + 47.137, + 32.667, + 8.422, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.161, + 34.519, + 48.681, + 57.482, + 61.267, + 60.469, + 44.906, + 30.046, + 31.797, + 4.036, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.41, + 15.561, + 6.682, + 4.846, + 14.218, + 39.413, + 45.485, + 31.736, + 8.707, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.192, + 14.64, + 23.523, + 27.735, + 27.495, + 44.191, + 45.377, + 31.348, + 8.86, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.396, + 18.424, + 28.083, + 32.671, + 32.089, + 48.487, + 48.949, + 34.059, + 10.261, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 17.414, + 26.173, + 30.235, + 29.647, + 24.935, + 47.193, + 33.187, + 10.701, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.399, + 16.374, + 16.629, + 11.768, + 19.895, + 20.298, + 33.821, + 19.718, + 3.254, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 20.992, + 26.338, + 13.592, + 9.964, + 13.499, + 28.811, + 10.581, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.049, + 15.536, + 24.867, + 29.282, + 28.85, + 44.727, + 46.371, + 32.719, + 11.491, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.31, + 15.207, + 23.629, + 27.877, + 27.8, + 44.716, + 46.428, + 32.723, + 11.278, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.733, + 17.09, + 26.046, + 19.652, + 11.565, + 29.287, + 39.861, + 26.198, + 12.724, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.007, + 13.518, + 7.55, + 14.877, + -0.0, + 34.868, + 17.499, + 1.984, + 1.366, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 14.316, + 23.95, + 28.795, + 28.779, + 44.68, + 47.104, + 33.008, + 12.438, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 13.351, + 22.265, + 26.96, + 13.853, + 43.938, + 46.07, + 32.587, + 12.674, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 11.493, + 15.494, + 13.892, + 2.476, + 27.489, + 12.49, + 1.421, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + -0.0, + -0.0, + 27.474, + 23.393, + -0.0, + 21.657, + 1.404, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.087, + 15.477, + 24.61, + 29.514, + -0.0, + -0.0, + 0.0, + 0.577, + 0.853, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 2.843, + 12.356, + 14.185, + 15.637, + 3.776, + 25.071, + 26.922, + 14.267, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.543, + 14.97, + 23.812, + 28.827, + 29.054, + 47.333, + 47.577, + 34.393, + 14.275, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 14.144, + 5.201, + 14.848, + 8.73, + 28.031, + 35.045, + 22.214, + 3.956, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 0.0, + -0.0, + -0.0, + -0.0, + -0.0, + 3.094, + 1.189, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 0.0, + 26.824, + 17.479, + 35.021, + 14.709, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.938, + 0.0, + 12.191, + 11.483, + 3.108, + -0.0, + 32.651, + 11.877, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.42, + 20.128, + 30.894, + 33.173, + 33.173, + 54.445, + 53.524, + 38.533, + 17.303, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.555, + 19.604, + 29.213, + 33.173, + 33.173, + 54.564, + 51.467, + 37.457, + 17.234, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.898, + 17.905, + 26.507, + 30.393, + 29.95, + 37.518, + 41.683, + 20.338, + 5.538, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.728, + 16.234, + 14.835, + 18.388, + 17.472, + 29.464, + 37.151, + 26.225, + 8.188, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.625, + 33.126, + 33.173, + 29.035, + 23.803, + 37.638, + 14.423, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 13.749, + 22.867, + 27.495, + 28.385, + 45.773, + 48.899, + 35.702, + 15.665, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.125, + 18.901, + 17.986, + 20.23, + 16.832, + 53.775, + 50.358, + 37.408, + 18.603, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.267, + 18.485, + 27.389, + 31.811, + 31.555, + 54.395, + 50.276, + 37.375, + 18.809, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.832, + 16.988, + 26.375, + 30.821, + 30.748, + 52.911, + 49.41, + 36.591, + 18.198, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 12.979, + 16.793, + 12.481, + 5.008, + 34.248, + 21.471, + 6.774, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.748, + 14.759, + 24.158, + 29.212, + 29.85, + 43.712, + 40.042, + 29.577, + 11.795, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.862, + 10.245, + 19.648, + 8.41, + 18.95, + 29.35, + 26.834, + 10.376, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 8.795, + 11.617, + 12.091, + 21.927, + 6.385, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.104, + 3.746, + 13.628, + -0.0, + 0.0, + 0.0, + 6.008, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + -0.0, + 8.13, + 4.847, + 8.888, + 2.329, + 27.229, + 3.715, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.438, + 16.512, + 26.103, + 31.586, + 32.183, + 41.647, + 51.306, + 37.491, + 18.454, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.44, + -0.0, + 25.262, + 30.705, + 30.816, + 52.054, + 50.637, + 36.952, + 1.014, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.818, + 17.904, + -0.0, + 32.264, + 32.735, + 49.033, + 52.157, + 29.623, + 19.06, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.171, + 18.846, + 28.881, + 33.173, + 33.173, + 59.053, + 52.677, + 39.289, + 20.424, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.689, + 18.203, + 26.908, + 31.458, + 31.476, + 45.787, + 50.129, + 37.245, + 19.569, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.204, + 17.16, + 26.328, + 31.093, + 31.429, + 56.985, + 50.469, + 37.493, + 19.219, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.217, + 17.519, + 26.815, + 31.437, + 31.322, + 56.283, + 49.96, + 30.302, + 3.684, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 3.325, + -0.0, + -0.0, + 4.397, + 20.496, + 27.518, + 12.594, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + -0.0, + 14.457, + 6.279, + 18.55, + 37.638, + 19.566, + 0.518, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.467, + 17.089, + 25.881, + 30.724, + 31.138, + 57.346, + 51.342, + 38.112, + 20.412, + 0.774, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.265, + 15.17, + 23.768, + 29.306, + 30.41, + 56.404, + 51.148, + 38.494, + 20.661, + 0.946, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.396, + 14.995, + 10.897, + 0.943, + 25.4, + 12.068, + 0.133, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.499, + 22.293, + 32.131, + 33.173, + 33.483, + 65.049, + 56.676, + 42.616, + 23.057, + 0.566, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.61, + 20.397, + 29.29, + 32.675, + 32.026, + 58.513, + 50.869, + 39.283, + 21.873, + 0.593, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.852, + 19.144, + 29.034, + 33.173, + 33.173, + 45.63, + 8.087, + 2.497, + 4.123, + 1.185, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.581, + 18.145, + 27.677, + 32.797, + 33.173, + 60.129, + 52.625, + 39.689, + 21.334, + 1.676, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.562, + 21.483, + 17.894, + 19.017, + 33.173, + 46.994, + 55.519, + 3.209, + 3.901, + 0.157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 7.928, + 22.387, + 31.941, + 33.173, + 34.566, + 65.049, + 56.13, + 42.352, + 0.496, + 1.163, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.982, + 0.0, + 4.9, + 0.0, + 6.288, + 9.48, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 2.041, + 12.182, + 4.832, + 5.411, + 23.71, + 15.802, + 6.736, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 2.358, + 17.191, + 18.265, + 15.778, + 34.269, + 40.35, + 23.002, + 9.197, + 0.298, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 4.644, + 2.417, + 14.598, + 17.763, + 20.196, + 38.355, + 33.489, + 37.613, + 20.363, + 1.997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 4.719, + 16.629, + 25.043, + 8.111, + 31.135, + 58.226, + 40.785, + 37.378, + 9.776, + 2.016, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 25.5, + 29.703, + 16.997, + 33.942, + 50.287, + 37.216, + 20.167, + 2.172, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.514, + 20.178, + 17.456, + 20.157, + 16.835, + 45.874, + 43.636, + 30.474, + 21.603, + 0.555, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.15, + 21.968, + 30.704, + 33.173, + 37.826, + 61.245, + 52.627, + 39.655, + 17.153, + 1.859, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.404, + 19.353, + 27.745, + 31.021, + 29.318, + 53.628, + 48.721, + 28.645, + 16.01, + 2.526, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 19.086, + 27.865, + 32.064, + 32.343, + 59.561, + 50.779, + 38.069, + 20.746, + 2.804, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 21.31, + 18.289, + 16.709, + 21.477, + 33.559, + 38.581, + 24.576, + 15.22, + 1.994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.441, + 20.891, + 29.909, + 33.173, + 38.08, + 60.63, + 51.74, + 38.814, + 21.136, + 3.098, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.805, + 20.055, + 28.728, + 33.051, + 38.006, + 60.643, + 51.765, + 39.012, + 21.465, + 3.308, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 7.205, + 19.43, + 27.045, + 30.871, + 36.745, + 58.833, + 50.831, + 38.413, + 21.206, + 3.322, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 7.794, + 20.737, + 29.682, + 33.173, + 39.164, + 60.418, + 51.231, + 38.343, + 21.062, + 3.272, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.627, + 16.983, + 24.947, + 27.981, + 34.126, + 57.839, + 50.207, + 38.277, + 21.409, + 3.456, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 8.692, + 21.777, + 30.723, + 33.173, + 40.954, + 62.14, + 53.402, + 35.827, + 15.608, + 2.715, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.715, + 22.906, + 31.439, + 33.173, + 41.649, + 61.008, + 52.436, + 39.544, + 22.236, + 3.752, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.533, + 22.366, + 30.859, + 33.173, + 41.866, + 60.033, + 50.951, + 38.481, + 21.637, + 3.679, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 15.667, + 20.969, + 18.302, + 17.837, + 34.616, + 34.626, + 37.594, + 20.899, + 3.539, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 6.372, + 18.705, + 26.575, + 30.762, + 37.875, + 58.622, + 50.135, + 37.276, + 20.198, + 3.315, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 5.388, + 17.057, + 23.487, + 26.922, + 34.482, + 57.347, + 49.907, + 37.448, + 20.495, + 3.49, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 5.295, + 23.181, + 19.344, + 21.984, + 44.713, + 41.492, + 36.004, + 14.225, + 2.587, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 11.172, + 26.3, + 29.678, + 31.157, + 55.985, + 33.926, + 31.573, + 14.97, + 3.321, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.277, + 17.315, + 26.854, + 31.253, + 38.213, + 51.004, + 49.653, + 37.248, + 20.047, + 3.459, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.437, + 21.38, + 30.346, + 33.173, + 0.0, + 25.974, + 36.172, + 22.642, + 8.083, + 3.626, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.23, + 20.682, + 28.187, + 31.658, + 41.695, + 59.618, + 51.063, + 37.949, + 8.627, + 3.705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.176, + 17.629, + 24.761, + 20.072, + 28.586, + 47.335, + 43.712, + 35.215, + 19.131, + 3.546, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 17.045, + 26.181, + 27.726, + 13.121, + 41.904, + 48.772, + 33.634, + 12.975, + 2.501, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 10.855, + 23.587, + 31.974, + 33.173, + 45.812, + 61.858, + 52.815, + 39.544, + 21.738, + 3.897, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.371, + 20.646, + 29.269, + 33.173, + 44.005, + 61.034, + 52.339, + 38.952, + 0.278, + 0.119, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 11.499, + 24.197, + 32.821, + 33.173, + 46.503, + 62.959, + 53.385, + 40.006, + 21.789, + 3.983, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.831, + 22.049, + 29.677, + 32.783, + 44.279, + 48.255, + 50.328, + 37.806, + 20.878, + 3.884, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.102, + 7.78, + 22.816, + 27.018, + 38.87, + 56.363, + 48.83, + 36.468, + 20.063, + 3.84, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 10.947, + 27.247, + 31.56, + 37.413, + 59.362, + 50.749, + 38.158, + 20.776, + 4.018, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 10.466, + 23.369, + 31.089, + 33.173, + 46.451, + 62.011, + 52.65, + 23.025, + 20.834, + 4.147, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 10.656, + 23.314, + 31.981, + 33.173, + 47.063, + 60.984, + 51.865, + 38.519, + 20.835, + 4.168, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 10.076, + 22.068, + 29.183, + 32.0, + 44.816, + 57.821, + 49.574, + 37.634, + 20.686, + 4.133, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 7.613, + 19.138, + 26.984, + 30.903, + 41.568, + 58.0, + 49.118, + 36.326, + 20.067, + 3.96, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.826, + 19.643, + 27.186, + 31.225, + 48.008, + 58.829, + 49.999, + 36.826, + 18.154, + 3.552, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 9.422, + 21.001, + 29.254, + 33.173, + 47.25, + 60.041, + 51.028, + 38.183, + 20.868, + 3.998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 21.868, + 0.0, + 0.106, + 33.173, + 37.083, + 43.139, + 25.356, + 4.066, + 0.123, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 21.743, + 29.562, + 33.168, + 27.553, + 59.174, + 27.824, + 13.292, + 11.345, + 2.382, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 9.496, + -0.0, + -0.0, + -0.0, + -0.0, + -0.0, + 0.0, + 15.534, + 5.293, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.736, + 23.947, + 31.279, + 33.173, + 47.311, + 60.308, + 51.065, + 38.291, + 20.778, + 3.9, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.716, + 19.213, + 25.028, + 27.235, + 42.251, + 56.191, + 48.43, + 36.611, + 19.772, + 3.928, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.999, + 18.673, + 25.438, + 28.046, + 44.706, + 54.671, + 47.048, + 35.476, + 19.405, + 3.879, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 7.209, + 17.132, + 23.082, + 26.084, + 40.696, + 55.38, + 47.491, + 35.618, + 19.443, + 3.602, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 7.573, + 9.535, + 15.537, + 28.133, + 40.262, + 55.195, + 47.058, + 35.243, + 15.317, + 3.642, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 8.018, + 18.207, + 24.196, + 26.349, + 38.937, + 51.26, + 43.815, + 33.047, + 17.817, + 3.746, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.204, + 16.997, + 24.814, + 27.081, + 37.906, + 51.558, + 43.157, + 33.025, + 18.288, + 3.421, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 6.752, + 16.718, + 22.743, + 24.946, + 38.312, + 52.181, + 44.858, + 33.81, + 18.572, + 3.518, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 5.932, + 16.378, + 23.943, + 27.22, + 40.64, + 54.601, + 46.52, + 34.421, + 18.868, + 3.708, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 8.056, + 18.498, + 25.631, + 29.015, + 51.342, + 56.648, + 48.125, + 36.077, + 19.762, + 3.833, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 6.175, + 18.601, + 16.6, + 0.0, + 9.577, + 35.413, + 12.144, + 11.06, + 6.955, + 1.803, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 0.0, + 3.645, + 14.311, + 15.415, + 23.032, + 25.642, + 14.267, + 3.607, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 8.427, + 19.625, + 26.944, + 30.413, + 45.367, + 27.336, + 35.024, + 14.139, + 7.992, + 1.356, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 9.216, + 19.936, + 26.978, + 29.712, + 44.961, + 55.036, + 46.4, + 34.812, + 18.68, + 3.942, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 8.208, + 19.246, + 26.589, + 28.662, + 42.574, + 52.939, + 44.44, + 33.491, + 18.453, + 3.776, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 7.545, + 17.952, + 24.207, + 25.743, + 39.879, + 51.587, + 44.059, + 33.166, + 17.922, + 4.002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 5.671, + 15.92, + 23.053, + 26.487, + 52.853, + 54.06, + 45.635, + 33.636, + 18.94, + 3.677, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 8.13, + 18.435, + 24.872, + 26.682, + 40.369, + 50.928, + 44.659, + 33.844, + 18.285, + 3.614, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.02, + 16.763, + 22.921, + 24.728, + 38.419, + 51.056, + 44.345, + 33.378, + 17.869, + 3.779, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 6.229, + 15.958, + 22.347, + 24.335, + 37.76, + 50.017, + 42.911, + 32.059, + 17.316, + 3.828, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.264, + 13.541, + 20.713, + 23.996, + 38.141, + 51.704, + 44.207, + 32.873, + 17.706, + 3.907, + 0.021, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 5.239, + 10.871, + 18.848, + 18.824, + 43.175, + 54.48, + 37.364, + 30.485, + 16.487, + 4.09, + 0.069, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.666, + 17.647, + 24.236, + 27.873, + 1.837, + 24.601, + 47.552, + 35.521, + 14.449, + 4.836, + 0.087, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 19.697, + 26.878, + 30.272, + 40.063, + 25.877, + 5.503, + 29.864, + 14.556, + 3.928, + 0.165, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.01, + 4.059, + 26.156, + 28.582, + 45.497, + 37.814, + 37.106, + 33.528, + 18.043, + 4.198, + 0.149, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 5.494, + 15.576, + 22.443, + 25.904, + 41.3, + 53.09, + 44.593, + 33.002, + 17.771, + 4.721, + 0.113, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 6.325, + 17.021, + 24.4, + 27.879, + 44.501, + 54.343, + 46.247, + 34.211, + 18.32, + 4.226, + 0.232, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.741, + 17.301, + 24.278, + 27.517, + 44.192, + 54.409, + 46.284, + 34.596, + 18.601, + 3.917, + 0.273, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 7.695, + 17.972, + 25.733, + 28.92, + 45.5, + 55.225, + 46.806, + 34.941, + 18.764, + 3.852, + 0.223, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 10.681, + 21.058, + 27.318, + 30.005, + 48.803, + 55.458, + 47.321, + 35.519, + 19.167, + 4.139, + 0.296, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.767, + 19.025, + 25.782, + 31.338, + 59.965, + 55.297, + 47.134, + 35.207, + 19.048, + 4.449, + 0.359, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.516, + 19.401, + 26.491, + 29.57, + 40.586, + 11.349, + 35.103, + 35.026, + 18.884, + 4.618, + 0.366, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 7.338, + 17.787, + 24.425, + 27.649, + 44.889, + 54.736, + 46.385, + 28.152, + 16.562, + 4.685, + 0.469, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.816, + 18.828, + 26.246, + 29.588, + 46.696, + 55.916, + 47.692, + 35.612, + 19.192, + 4.165, + 0.369, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 7.747, + 17.349, + 22.833, + 24.959, + 41.443, + 52.023, + 44.412, + 33.493, + 18.257, + 3.738, + 0.376, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.78, + 17.674, + 23.83, + 26.013, + 42.076, + 51.517, + 43.238, + 32.776, + 18.147, + 3.832, + 0.379, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.424, + 16.258, + 21.922, + 23.697, + 38.295, + 48.739, + 42.404, + 32.657, + 17.778, + 3.957, + 0.402, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 4.751, + 14.723, + 21.572, + 24.836, + 55.333, + 52.303, + 44.477, + 33.292, + 18.024, + 3.765, + 0.393, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.298, + 14.458, + 20.366, + 22.621, + 37.661, + 49.593, + 42.584, + 32.356, + 17.576, + 4.016, + 0.427, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 4.514, + 14.078, + 21.061, + 24.116, + 38.828, + 51.757, + 44.152, + 33.223, + 18.155, + 3.738, + 0.464, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.462, + 16.857, + 11.879, + 26.694, + 36.024, + 53.307, + 45.532, + 33.991, + 18.484, + 3.921, + 0.537, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 7.621, + 18.021, + 24.932, + 27.99, + 44.763, + 54.901, + 46.712, + 35.022, + 19.033, + 3.965, + 0.585, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 7.439, + 18.077, + 25.212, + 28.062, + 45.499, + 54.587, + 46.349, + 34.792, + 18.868, + 4.401, + 0.678, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.773, + 15.248, + 21.927, + 24.44, + 40.617, + 51.657, + 44.169, + 33.46, + 18.434, + 4.089, + 0.678, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 5.265, + 14.668, + 21.028, + 26.822, + 54.044, + 50.098, + 42.874, + 32.398, + 17.733, + 4.321, + 0.677, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 4.454, + 14.263, + 20.798, + 26.803, + 55.028, + 40.113, + 43.575, + 32.629, + 16.485, + 4.7, + 0.78, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 4.842, + 14.411, + 20.843, + 23.97, + 38.83, + 51.211, + 43.832, + 32.857, + 18.14, + 4.442, + 0.793, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + -0.0, + 8.163, + 14.512, + 7.109, + 0.0, + 0.201, + 30.39, + 13.747, + 18.154, + 4.591, + 0.888, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 4.855, + 13.985, + 19.912, + 23.653, + 33.088, + 36.726, + 37.538, + 29.956, + 15.21, + 4.994, + 0.92, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + -0.0, + 3.849, + 10.182, + 16.163, + 15.115, + 37.45, + 21.295, + 18.382, + 12.173, + 4.373, + 0.927, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 3.724, + 13.463, + 19.259, + 20.678, + 33.291, + 46.442, + 40.172, + 30.716, + 16.866, + 4.368, + 0.987, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.633, + 13.111, + 19.658, + 24.695, + 54.54, + 50.793, + 43.368, + 32.613, + 18.148, + 4.378, + 0.989, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 11.349, + 5.348, + 23.5, + 20.094, + 26.676, + 33.572, + 18.676, + 5.396, + 1.072, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 6.006, + 16.414, + 23.363, + 26.678, + 41.932, + 53.913, + 45.863, + 34.497, + 19.023, + 4.699, + 1.157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 8.311, + 19.418, + 26.574, + 29.815, + 46.715, + 56.092, + 47.79, + 36.033, + 20.152, + 4.618, + 1.122, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 9.04, + 19.876, + 26.743, + 28.939, + 42.97, + 55.153, + 46.948, + 35.421, + 19.627, + 4.458, + 1.049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.617, + 16.171, + 22.051, + 24.433, + 39.065, + 50.496, + 42.678, + 32.551, + 18.622, + 4.342, + 1.163, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.352, + 14.969, + 20.756, + 22.871, + 36.844, + 49.957, + 43.208, + 33.005, + 18.709, + 4.543, + 1.115, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 4.47, + 14.579, + 21.535, + 26.698, + 56.554, + 52.834, + 45.218, + 34.229, + 19.277, + 4.549, + 1.128, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 6.552, + 15.364, + 22.126, + 27.146, + 41.877, + 54.14, + 46.272, + 34.889, + 19.63, + 4.646, + 1.257, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 6.133, + 16.368, + 23.242, + 26.412, + 41.658, + 53.497, + 45.556, + 34.347, + 19.347, + 4.545, + 1.203, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 5.229, + 14.319, + 19.62, + 21.045, + 35.156, + 49.269, + 43.136, + 33.018, + 18.763, + 4.849, + 1.28, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 3.669, + 13.449, + 20.14, + 23.269, + 37.038, + 51.032, + 43.692, + 32.655, + 18.555, + 5.009, + 1.194, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 4.961, + 15.199, + 22.015, + 25.207, + 38.888, + 52.773, + 45.119, + 34.148, + 19.4, + 4.734, + 1.246, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 4.787, + 14.407, + 20.21, + 22.296, + 36.099, + 50.012, + 43.327, + 33.147, + 19.03, + 4.928, + 1.335, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 4.725, + 14.006, + 19.284, + 27.672, + 52.741, + 49.575, + 43.106, + 32.965, + 18.864, + 5.052, + 1.33, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.576, + 12.886, + 19.272, + 22.487, + 36.769, + 50.452, + 42.884, + 32.765, + 18.712, + 4.987, + 1.287, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 3.658, + 12.923, + 19.025, + 21.558, + 34.905, + 49.985, + 42.955, + 32.721, + 18.678, + 4.9, + 1.234, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.179, + 13.953, + 20.553, + 23.733, + 36.972, + 51.396, + 44.049, + 33.516, + 19.181, + 4.834, + 1.269, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 3.643, + 13.183, + 19.73, + 22.901, + 35.515, + 51.032, + 43.82, + 33.368, + 19.193, + 4.867, + 1.261, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.311, + 12.711, + 17.964, + 21.692, + 34.582, + 50.56, + 43.574, + 32.348, + 18.461, + 4.903, + 1.175, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 0.0, + 12.528, + 18.894, + 21.402, + 30.913, + 43.958, + 39.055, + 29.115, + 15.835, + 5.223, + 1.266, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 0.721, + 10.356, + 20.182, + 24.418, + 52.039, + 50.761, + 44.674, + 34.043, + 19.652, + 4.959, + 1.219, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.322, + 10.6, + 17.002, + 20.167, + 31.205, + 48.086, + 26.47, + 15.629, + 18.039, + 5.217, + 1.341, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 2.386, + 11.771, + 18.406, + 21.583, + 33.123, + 49.936, + 42.954, + 32.697, + 18.885, + 5.208, + 1.316, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.704, + 15.131, + 22.418, + 25.81, + 38.65, + 53.173, + 45.579, + 34.613, + 19.982, + 5.108, + 1.257, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 5.161, + 14.565, + 20.155, + 22.926, + 37.064, + 51.586, + 44.879, + 34.493, + 20.025, + 5.105, + 1.24, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.537, + 12.693, + 19.271, + 22.836, + 35.324, + 51.569, + 44.571, + 34.115, + 19.935, + 4.871, + 0.946, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 4.91, + 14.503, + 20.148, + 23.256, + 35.544, + 51.492, + 44.661, + 34.348, + 19.988, + 4.986, + 0.982, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 5.283, + 15.295, + 21.738, + 29.159, + 56.631, + 52.882, + 45.652, + 35.05, + 20.379, + 4.994, + 0.941, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 4.633, + 13.472, + 18.925, + 21.661, + 33.945, + 50.046, + 43.446, + 33.611, + 19.566, + 4.796, + 0.875, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 2.837, + 10.866, + 16.911, + 10.472, + 31.729, + 47.203, + 40.77, + 31.077, + 18.714, + 5.485, + 1.253, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 1.165, + 10.401, + 16.693, + 21.95, + 51.266, + 42.79, + 41.975, + 32.135, + 18.563, + 5.379, + 1.285, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 0.863, + 10.245, + 16.726, + 20.143, + 24.59, + 42.523, + 41.881, + 31.998, + 18.717, + 5.734, + 1.427, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 2.839, + 12.81, + 19.742, + 23.09, + 33.978, + 51.587, + 44.486, + 34.014, + 19.731, + 4.984, + 0.988, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 3.894, + 14.177, + 21.076, + 24.488, + 35.337, + 52.516, + 45.196, + 34.69, + 20.355, + 5.262, + 0.959, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.85, + 12.421, + 19.031, + 25.046, + 54.254, + 50.85, + 43.836, + 33.117, + 19.515, + 6.092, + 1.441, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 0.0, + 6.28, + 8.192, + 4.037, + 7.126, + 24.456, + 20.07, + 25.914, + 16.734, + 5.732, + 1.272, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 3.899, + 14.529, + 22.298, + 25.79, + 37.482, + 53.625, + 46.411, + 35.615, + 20.781, + 5.357, + 0.924, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 4.214, + 14.177, + 20.847, + 24.196, + 35.338, + 52.463, + 45.448, + 34.934, + 20.308, + 5.168, + 0.864, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 3.828, + 13.418, + 19.724, + 23.133, + 33.654, + 51.301, + 44.348, + 34.03, + 19.837, + 5.133, + 0.941, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 1.236, + -0.0, + -0.0, + 0.0, + 18.847, + 40.562, + 31.423, + 19.106, + 5.418, + 1.015, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.259, + 10.874, + 17.664, + 20.976, + 29.153, + 49.194, + 42.706, + 32.613, + 18.947, + 5.512, + 1.013, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 2.337, + 12.323, + 19.181, + 23.778, + 54.379, + 51.035, + 44.098, + 33.89, + 19.893, + 5.19, + 0.899, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 3.661, + 13.594, + 20.23, + 23.636, + 33.843, + 51.689, + 44.66, + 34.316, + 20.127, + 5.29, + 0.904, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 4.079, + 14.348, + 21.249, + 24.797, + 35.119, + 52.73, + 45.402, + 34.726, + 20.321, + 5.111, + 0.761, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 3.725, + 13.991, + 21.268, + 24.94, + 35.042, + 53.177, + 46.006, + 35.389, + 20.842, + 5.169, + 0.761, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 3.852, + 14.145, + 21.314, + 24.837, + 35.024, + 53.1, + 45.692, + 35.025, + 20.589, + 5.263, + 0.758, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 3.401, + 13.529, + 20.459, + 23.83, + 33.531, + 51.979, + 44.726, + 34.189, + 19.972, + 5.248, + 0.838, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 1.771, + 11.464, + 18.211, + 21.644, + 30.508, + 49.743, + 42.898, + 32.53, + 18.99, + 5.193, + 0.535, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 10.888, + 11.162, + 18.86, + 0.0, + 0.0, + 10.346, + 1.306, + 5.53, + 0.936, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 1.295, + 11.128, + 18.209, + 21.777, + 30.601, + 50.287, + 43.517, + 33.408, + 19.6, + 5.261, + 0.774, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 2.72, + 12.778, + 19.792, + 23.335, + 32.374, + 51.851, + 44.677, + 34.218, + 19.821, + 5.31, + 0.774, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 2.8, + 12.813, + 19.445, + 22.93, + 32.315, + 51.529, + 44.587, + 34.32, + 20.01, + 5.292, + 0.715, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 2.138, + 12.016, + 19.038, + 22.496, + 31.273, + 51.046, + 43.987, + 33.637, + 19.598, + 5.241, + 0.659, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 2.491, + 12.456, + 19.237, + 22.595, + 31.879, + 51.135, + 44.168, + 33.831, + 19.669, + 5.222, + 0.651, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 2.691, + 12.625, + 19.18, + 22.62, + 31.699, + 50.491, + 43.693, + 33.603, + 19.708, + 5.108, + 0.548, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 2.555, + 12.348, + 19.129, + 22.588, + 51.187, + 51.297, + 44.192, + 33.823, + 19.725, + 5.194, + 0.533, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 2.188, + 11.82, + 18.587, + 21.928, + 30.727, + 50.068, + 42.899, + 32.558, + 19.188, + 5.436, + 0.467, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 12.412, + 13.183, + 15.556, + 16.167, + 32.568, + 43.892, + 33.377, + 19.503, + 5.271, + 0.449, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 2.201, + 11.974, + 18.955, + 22.778, + 32.006, + 51.2, + 44.501, + 33.995, + 20.006, + 5.122, + 0.413, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 2.947, + 12.654, + 19.397, + 22.525, + 31.932, + 51.161, + 44.221, + 33.83, + 19.677, + 5.054, + 0.374, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 2.65, + 12.686, + 19.338, + 22.843, + 31.923, + 39.356, + 43.692, + 33.165, + 19.405, + 5.504, + 0.355, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.863, + 13.407, + 20.638, + 24.459, + 34.598, + 52.69, + 45.615, + 34.72, + 20.455, + 5.263, + 0.366, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 5.867, + 16.87, + 24.556, + 28.183, + 54.556, + 55.75, + 47.876, + 36.424, + 21.073, + 5.128, + 0.256, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.304, + 15.956, + 23.041, + 26.764, + 37.419, + 54.527, + 46.883, + 35.758, + 20.784, + 5.026, + 0.257, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.314, + 15.637, + 22.276, + 26.085, + 37.297, + 54.446, + 46.984, + 35.965, + 20.961, + 4.999, + 0.216, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.166, + 15.723, + 22.861, + 26.646, + 37.549, + 54.728, + 47.246, + 36.049, + 21.004, + 5.092, + 0.221, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 4.822, + 15.366, + 22.529, + 26.292, + 37.029, + 54.458, + 47.003, + 35.926, + 20.841, + 4.885, + 0.247, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 5.132, + 16.139, + 23.431, + 27.073, + 37.354, + 54.864, + 47.096, + 35.832, + 20.683, + 4.809, + 0.208, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 3.69, + 13.992, + 20.86, + 24.119, + 33.506, + 52.076, + 44.491, + 33.791, + 19.569, + 4.504, + 0.162, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 3.429, + 13.332, + 20.191, + 23.716, + 48.398, + 52.05, + 44.771, + 34.08, + 19.5, + 4.438, + 0.121, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 2.89, + 11.235, + 9.62, + 23.492, + 32.335, + 43.138, + 32.668, + 29.469, + 17.761, + 4.427, + 0.044, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 2.98, + 12.93, + 19.465, + 22.887, + 32.002, + 51.021, + 43.996, + 33.062, + 18.401, + 4.846, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 2.664, + 12.369, + 18.615, + 21.991, + 31.002, + 50.008, + 42.866, + 32.014, + 17.905, + 4.693, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.702, + 12.609, + 19.768, + 23.207, + 32.258, + 51.535, + 44.363, + 33.357, + 18.753, + 4.55, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 3.833, + 14.156, + 21.387, + 24.977, + 34.578, + 52.946, + 45.366, + 34.484, + 19.559, + 4.277, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 5.122, + 10.919, + 23.073, + 21.217, + 36.709, + 54.235, + 46.362, + 35.065, + 19.837, + 4.21, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 5.596, + 15.89, + 22.642, + 26.211, + 49.038, + 53.85, + 46.161, + 34.846, + 19.577, + 4.102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 4.892, + 15.189, + 21.818, + 24.946, + 35.336, + 52.62, + 44.947, + 33.935, + 18.883, + 4.165, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.95, + 15.382, + 22.321, + 25.569, + 35.428, + 53.055, + 45.153, + 33.843, + 18.947, + 4.011, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + 6.193, + 17.118, + 24.192, + 27.776, + 38.887, + 54.897, + 46.877, + 35.375, + 19.814, + 4.01, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.956, + 15.403, + 22.433, + 25.824, + 36.533, + 53.562, + 45.666, + 34.336, + 19.141, + 3.881, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.512, + 14.04, + 21.138, + 24.639, + 33.763, + 44.73, + 38.087, + 28.109, + 17.711, + 3.829, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.342, + 20.105, + 15.563, + 20.939, + 43.789, + 11.106, + 6.74, + 15.646, + 3.846, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.206, + 13.382, + 20.655, + 24.159, + 40.699, + 51.962, + 44.49, + 33.046, + 18.11, + 3.497, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 3.317, + 12.908, + 19.823, + 23.363, + 33.134, + 51.387, + 43.821, + 32.894, + 17.934, + 3.311, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.647, + 11.938, + 18.134, + 20.888, + 30.397, + 49.16, + 29.063, + 18.127, + 15.679, + 3.414, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 3.169, + 13.182, + 20.518, + 24.03, + 29.806, + 23.293, + 2.215, + 32.155, + 4.061, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.608, + 11.198, + 18.529, + 21.523, + 29.773, + 49.571, + 36.817, + 27.009, + 18.03, + 3.263, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.658, + 14.937, + 21.822, + 25.354, + 36.675, + 53.074, + 45.153, + 33.557, + 17.951, + 3.17, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 4.47, + 13.351, + 20.358, + 23.724, + 0.0, + 0.0, + -0.0, + 32.928, + 17.546, + 3.034, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 4.559, + 14.8, + 21.577, + 24.692, + 34.951, + 17.646, + 14.164, + 3.262, + 11.961, + 3.064, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.346, + 14.514, + 21.155, + 23.987, + 38.147, + 50.832, + 42.945, + 31.641, + 16.52, + 2.936, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.007, + 13.715, + 20.232, + 22.949, + 32.59, + 49.817, + 42.235, + 11.33, + 16.261, + 1.282, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.29, + 14.191, + 21.243, + 24.484, + 34.561, + 51.9, + 43.936, + 32.105, + 16.685, + 2.624, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.469, + 14.661, + 21.761, + 25.041, + 35.52, + 52.583, + 43.955, + 31.639, + 16.266, + 2.521, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.692, + 18.439, + 25.556, + 28.628, + 41.04, + 55.536, + 46.825, + 34.511, + 17.592, + 2.6, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.349, + 19.284, + 26.474, + 29.752, + 42.418, + 55.775, + 47.001, + 34.528, + 17.718, + 2.464, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 6.355, + 16.826, + 24.358, + 27.833, + 40.036, + 54.604, + 46.25, + 34.163, + 17.484, + 2.297, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.448, + 16.63, + 23.262, + 25.68, + 36.955, + 50.734, + 42.48, + 31.538, + 16.276, + 2.08, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.631, + 15.332, + 21.731, + 24.116, + 34.74, + 49.249, + 41.64, + 30.716, + 15.672, + 2.034, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 5.177, + 15.28, + 21.904, + 25.094, + 36.219, + 52.026, + 43.213, + 30.807, + 14.097, + 1.609, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 3.301, + 14.493, + 23.27, + 26.25, + 34.453, + 52.892, + 43.364, + 29.939, + 15.488, + 1.828, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 9.936, + 21.756, + 29.988, + 33.173, + 46.749, + 58.737, + 48.937, + 35.461, + 17.661, + 1.827, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 11.197, + 23.189, + 30.651, + 33.173, + 49.066, + 58.651, + 49.066, + 35.842, + 17.752, + 1.724, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 10.501, + 21.767, + 29.044, + 31.882, + 46.321, + 56.684, + 47.386, + 34.467, + 17.208, + 1.465, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.522, + 18.85, + 25.203, + 27.633, + 41.258, + 52.86, + 44.668, + 32.809, + 16.191, + 1.228, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 7.428, + 18.968, + 26.614, + 29.869, + 41.872, + 55.885, + 47.012, + 33.628, + 16.158, + 1.036, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 9.695, + 20.352, + 26.828, + 29.139, + 42.938, + 53.796, + 44.996, + 32.574, + 16.007, + 0.924, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.891, + 18.831, + 25.809, + 28.911, + 42.229, + 54.208, + 45.098, + 32.014, + 15.045, + 0.806, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.558, + 17.478, + 26.815, + 30.453, + 40.374, + 56.224, + 47.029, + 33.967, + 16.1, + 0.824, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 11.026, + 22.575, + 29.784, + 32.661, + 47.474, + 57.267, + 47.551, + 33.995, + 15.888, + 0.704, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 10.218, + 21.295, + 28.018, + 30.533, + 44.647, + 54.894, + 45.455, + 32.599, + 15.276, + 0.579, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 9.671, + 20.442, + 27.254, + 29.689, + 43.455, + 53.991, + 44.928, + 32.23, + 14.983, + 0.454, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.132, + 17.578, + 24.882, + 27.975, + 40.379, + 54.23, + 45.247, + 32.353, + 14.763, + 0.375, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.481, + 18.931, + 25.447, + 28.016, + 41.777, + 53.452, + 44.647, + 31.944, + 14.564, + 0.287, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.121, + 18.993, + 18.147, + 14.745, + 26.176, + 33.094, + 14.815, + 32.192, + 14.525, + 0.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 6.393, + 16.511, + 18.64, + 20.988, + 31.461, + 43.473, + 31.515, + 20.857, + 6.288, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 7.319, + 11.956, + 19.367, + 15.955, + 8.605, + 35.17, + 19.662, + 20.814, + 3.178, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.156, + 16.764, + 23.675, + 26.738, + 39.197, + 52.733, + 43.556, + 30.621, + 13.319, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.757, + 17.049, + 23.942, + 26.909, + 32.511, + 52.81, + 43.549, + 30.604, + 13.239, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 7.844, + 18.553, + 25.918, + 28.765, + 41.023, + 54.077, + 44.49, + 30.685, + 12.92, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 9.238, + 21.021, + 28.083, + 30.998, + 42.748, + 55.891, + 32.812, + 21.028, + 0.769, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 21.915, + -0.0, + 31.996, + 30.451, + -0.0, + 0.0, + 32.668, + 0.168, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 12.037, + 23.496, + 30.354, + 33.112, + -0.0, + 8.642, + 0.856, + 1.343, + 6.991, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.636, + 22.645, + 29.207, + 31.5, + 45.873, + 55.153, + 45.529, + 31.23, + 12.696, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 10.403, + 21.075, + 27.737, + 29.83, + 43.294, + 54.173, + 44.731, + 31.333, + 12.684, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 9.845, + 20.208, + 25.56, + 26.893, + 40.482, + 51.807, + 42.975, + 30.31, + 12.358, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.76, + 19.418, + 16.164, + 17.604, + 40.894, + 52.737, + 42.698, + 28.876, + 11.299, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.488, + 20.09, + 26.225, + 28.214, + 40.378, + 52.474, + 43.029, + 29.587, + 11.34, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.59, + 20.453, + 26.809, + 29.132, + 42.136, + 53.42, + 43.529, + 29.887, + 11.653, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.186, + 19.379, + 25.036, + 26.335, + 38.25, + 49.977, + 41.59, + 29.048, + 11.283, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.586, + 9.588, + 17.179, + 24.998, + 30.238, + 39.987, + 42.081, + 24.675, + 10.106, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 5.578, + 16.714, + 23.008, + 25.543, + 33.561, + 51.669, + 42.205, + 28.219, + 9.485, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 7.904, + 18.48, + 25.455, + 28.308, + 39.289, + 53.097, + 43.473, + 29.271, + 10.309, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.403, + 20.42, + 27.008, + 29.052, + 40.327, + 52.267, + 42.641, + 28.651, + 10.097, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 10.312, + 21.065, + 27.448, + 29.334, + 41.002, + 52.306, + 42.806, + 28.973, + 10.042, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.968, + 18.807, + 25.685, + 28.596, + 40.323, + 53.31, + 43.558, + 29.134, + 9.09, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 8.941, + 19.747, + 25.796, + 27.769, + 37.378, + 51.826, + 42.618, + 28.587, + 8.488, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.751, + 19.3, + 24.771, + 26.32, + 35.205, + 50.504, + 41.208, + 27.587, + 8.425, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.369, + 20.123, + 26.768, + 29.081, + 38.363, + 52.999, + 43.082, + 28.534, + 9.375, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.479, + 19.846, + 26.11, + 28.107, + 36.934, + 51.758, + 42.084, + 27.927, + 8.656, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 6.552, + 17.615, + 24.614, + 26.829, + 32.329, + 45.237, + 21.373, + 15.397, + 3.951, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 6.526, + 18.328, + 25.127, + 27.673, + 32.384, + 51.002, + 39.475, + 24.195, + 6.128, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 8.694, + 21.027, + 28.423, + 31.797, + 38.239, + 56.366, + 46.074, + 30.184, + 9.126, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.079, + 23.36, + 30.004, + 31.858, + 41.123, + 55.159, + 44.808, + 29.943, + 9.169, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.639, + 22.909, + 29.382, + 31.159, + 39.974, + 53.734, + 43.437, + 28.532, + 8.384, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 10.441, + 21.098, + 27.733, + 29.656, + 37.669, + 53.073, + 42.893, + 27.912, + 7.809, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 10.085, + 20.573, + 26.343, + 27.951, + 35.305, + 34.349, + 37.732, + 21.475, + 7.337, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.334, + 5.407, + 24.053, + 26.489, + 34.208, + 51.585, + 42.2, + 27.414, + 2.347, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 9.339, + 21.668, + 20.253, + 3.182, + 1.2, + 53.521, + 30.443, + 24.998, + 5.205, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 8.626, + 20.365, + 27.129, + 28.968, + 33.291, + 53.33, + 43.212, + 28.24, + 6.986, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 11.772, + 23.71, + 30.802, + 33.082, + 40.276, + 55.8, + 44.556, + 28.918, + 6.692, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 10.37, + 22.008, + 28.829, + 31.027, + 37.221, + 54.058, + 43.428, + 27.471, + 5.801, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 8.937, + 20.264, + 27.125, + 29.52, + 33.983, + 52.883, + 42.124, + 27.094, + 5.506, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 8.38, + 19.274, + 25.581, + 27.249, + 31.014, + 50.872, + 41.09, + 26.9, + 5.369, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 7.901, + 18.221, + 24.09, + 26.473, + 30.822, + 50.971, + 40.976, + 26.458, + 5.143, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.726, + 18.539, + 24.832, + 26.654, + 29.396, + 50.082, + 40.022, + 25.226, + 4.373, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 6.894, + 16.145, + 22.026, + 25.279, + 14.14, + 50.629, + 40.747, + 25.631, + 4.503, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.245, + 19.504, + 26.811, + 29.213, + 32.233, + 52.727, + 42.142, + 26.23, + 4.243, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.615, + 16.662, + 24.945, + 27.441, + 25.496, + 34.494, + 38.758, + 22.93, + 0.177, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 16.838, + 24.682, + 27.441, + 25.787, + 42.019, + 41.615, + 26.146, + 4.354, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 17.489, + 24.43, + 15.951, + 8.554, + 12.973, + 28.853, + 16.034, + 0.172, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.683, + 0.0, + 25.492, + 28.496, + 26.996, + 34.94, + 42.369, + 26.204, + 1.041, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.049, + 18.346, + 25.615, + 28.392, + 28.368, + 52.155, + 41.303, + 25.509, + 3.479, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 10.68, + 23.429, + 30.675, + 33.006, + 35.97, + 55.921, + 44.926, + 28.015, + 4.2, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.616, + 20.609, + 27.914, + 30.245, + 32.183, + 53.307, + 42.705, + 21.744, + 0.572, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 20.009, + 12.59, + 18.27, + -0.0, + 0.0, + 6.376, + 21.333, + 0.481, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 17.152, + 6.661, + 8.469, + -0.0, + 20.38, + 41.388, + 25.269, + 2.585, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.228, + 17.828, + 25.302, + 17.74, + 9.811, + 34.875, + 15.526, + 5.397, + 0.037, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.433, + 19.05, + 25.603, + 27.813, + 27.054, + 51.205, + 40.825, + 25.097, + 2.723, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.536, + 24.159, + 27.215, + 25.496, + 32.08, + 40.953, + 16.43, + 0.485, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 8.368, + 20.8, + 28.619, + 31.437, + 31.162, + 54.6, + 43.386, + 27.085, + 0.534, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.316, + 19.555, + 26.573, + 29.512, + 27.868, + 42.239, + 43.347, + 27.122, + 3.194, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.224, + 18.375, + 24.503, + 27.639, + 26.241, + 40.556, + 41.426, + 26.084, + 3.058, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.599, + 17.827, + 24.265, + 25.721, + 23.68, + 39.486, + 40.532, + 25.977, + 3.288, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.218, + 13.943, + 11.647, + 8.653, + 23.858, + 39.1, + 24.543, + 2.446, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 16.044, + 24.184, + 27.737, + 26.374, + 30.386, + 42.159, + 26.814, + 3.296, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.877, + 17.267, + 24.662, + 27.98, + 26.4, + 50.518, + 41.658, + 9.746, + 0.033, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + -0.0, + -0.0, + 0.0, + -0.0, + 0.0, + 4.148, + 2.609, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.246, + 5.636, + 12.138, + 8.723, + 12.15, + 26.043, + 10.925, + 1.33, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + -0.0, + -0.0, + 6.251, + -0.0, + 24.022, + 1.01, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 17.436, + 0.0, + 2.829, + 6.59, + 0.0, + -0.0, + 26.153, + 0.298, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 5.927, + 19.803, + 27.648, + 30.987, + 29.417, + 51.338, + 44.242, + 27.075, + 0.347, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.591, + 17.117, + 24.567, + 28.009, + 14.288, + 49.117, + 28.104, + 18.831, + 2.189, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.817, + 17.979, + 25.628, + 28.807, + 27.147, + 30.793, + 42.241, + 26.221, + 2.482, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.753, + 18.978, + 27.314, + 30.589, + 28.788, + 49.857, + 43.622, + 26.801, + 2.512, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 6.077, + 19.418, + 22.656, + 22.248, + 28.098, + 38.385, + 43.233, + 27.44, + 2.862, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.119, + 17.364, + 25.511, + 29.44, + 28.819, + 11.688, + 11.743, + 26.74, + 2.438, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.946, + 5.538, + -0.0, + 28.626, + 0.0, + -0.0, + -0.0, + 12.014, + 1.73, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.875, + 18.895, + 27.406, + 31.13, + 29.671, + 48.99, + 44.107, + 27.955, + 2.984, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.455, + 18.972, + 27.367, + 30.623, + 28.976, + 48.686, + 43.936, + 27.891, + 3.245, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 16.751, + 24.032, + 26.165, + 25.421, + 29.559, + 42.267, + 26.814, + 2.967, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 17.215, + 8.345, + 7.767, + 5.078, + -0.0, + 13.585, + 27.248, + 0.436, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.847, + 18.927, + 27.874, + 31.806, + 30.681, + 49.205, + 45.738, + 29.44, + 4.245, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.856, + 18.095, + 26.031, + 29.119, + 27.63, + 46.857, + 43.779, + 28.434, + 0.515, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 15.995, + 12.879, + 12.961, + 26.939, + 16.962, + 38.23, + 27.997, + 4.088, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.455, + 17.837, + 25.9, + 28.978, + 27.539, + 45.665, + 43.835, + 28.459, + 3.956, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 3.274, + 16.52, + 22.742, + 25.267, + 24.875, + 43.403, + 41.963, + 26.794, + 3.136, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 15.416, + 27.996, + 12.996, + 23.613, + 38.332, + 29.251, + 3.1, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.14, + 15.696, + 23.887, + 11.604, + 27.066, + 43.995, + 43.518, + 27.835, + 3.986, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.178, + 15.78, + 24.16, + 27.863, + 26.746, + 19.386, + 35.382, + 8.688, + 0.211, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 1.356, + 15.997, + 24.09, + 27.865, + 26.878, + 43.893, + 38.632, + 27.822, + 0.957, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.736, + 18.906, + 27.744, + 31.115, + 16.966, + 27.135, + 29.567, + 11.956, + 0.401, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 4.307, + 18.302, + 26.646, + 19.176, + 22.067, + 46.266, + 45.32, + 30.476, + 6.111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 2.236, + 15.792, + 10.449, + 13.207, + 9.39, + 23.939, + 25.58, + 12.103, + 0.437, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 8.358, + 15.162, + -0.0, + -0.0, + 28.319, + 1.342, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.699, + -0.0, + 0.0, + -0.0, + -0.0, + -0.0, + 6.439, + 0.226, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + -0.0, + 4.003, + 4.854, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + -0.0, + -0.0, + 6.401, + 0.304, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + -0.0, + -0.0, + 13.874, + 23.884, + 28.014, + 11.32, + 24.822, + 44.869, + 20.658, + 8.033, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "size_kw": 81.6667, + "lifecycle_om_cost_after_tax_bau": 6256.0, + "name": "ground", + "annual_energy_produced_kwh": 145904.83, + "year_one_energy_produced_kwh_bau": 74767.0, + "year_one_energy_produced_kwh": 152649.0, + "annual_energy_exported_kwh": 0.0, + "electric_to_storage_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.232, + 31.876, + 31.876, + 31.876, + 12.998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.198, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 15.795, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.189, + 15.527, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.276, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.961, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 10.032, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.677, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 15.316, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.353, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 10.64, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.795, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 10.198, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.067, + 16.044, + 31.876, + 31.876, + 31.876, + 31.876, + 31.759, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.136, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.856, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.306, + 2.02, + 13.174, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.043, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 10.95, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.369, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 10.624, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.034, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.959, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.461, + 31.876, + 31.876, + 31.876, + 31.876, + 26.914, + 19.495, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.146, + 31.225, + 31.876, + 31.876, + 31.876, + 31.876, + 11.498, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.53, + 31.529, + 31.876, + 31.876, + 31.876, + 31.876, + 10.81, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.699, + 23.467, + 25.713, + 31.876, + 31.876, + 31.876, + 26.866, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.222, + 3.098, + 14.268, + 24.046, + 21.599, + 31.876, + 31.876, + 26.254, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.654, + 31.876, + 31.876, + 31.876, + 31.876, + 23.103, + 4.172, + 6.109, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.695, + 13.218, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 2.08, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.909, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.084, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.463, + 31.812, + 31.876, + 31.876, + 31.876, + 31.876, + 9.595, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.306, + 12.259, + 13.412, + 20.428, + 20.384, + 21.601, + 17.878, + 5.975, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.942, + 11.808, + 7.379, + 12.797, + 0.334, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.856, + 18.51, + 31.876, + 1.78, + 31.876, + 31.876, + 31.876, + 0.871, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.833, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 8.16, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.689, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 6.303, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.653, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 6.34, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.503, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 14.49, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.746, + 20.339, + 31.876, + 31.876, + 31.876, + 31.876, + 27.783, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.578, + 30.29, + 31.876, + 31.876, + 31.876, + 31.876, + 11.001, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.345, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 5.648, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 13.545, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 4.448, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.879, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 5.114, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.82, + 17.011, + 28.428, + 31.876, + 31.876, + 31.876, + 31.876, + 1.611, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 13.157, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 4.836, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.936, + 24.128, + 31.876, + 31.876, + 31.876, + 31.876, + 18.805, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.048, + 14.344, + 28.422, + 28.78, + 23.002, + 31.876, + 31.876, + 13.026, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.045, + 22.708, + 31.876, + 31.876, + 31.876, + 11.601, + 13.034, + 7.213, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.593, + 13.825, + 6.085, + 14.029, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 17.993, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.473, + 31.876, + 29.934, + 31.876, + 31.876, + 31.876, + 7.462, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 14.273, + 31.876, + 31.876, + 24.006, + 31.876, + 31.876, + 11.591, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.351, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 2.642, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.993, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 13.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.838, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 2.155, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.432, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 2.561, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.19, + 21.148, + 26.483, + 31.876, + 29.148, + 16.643, + 31.876, + 16.01, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.957, + 1.547, + 2.061, + 7.237, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 16.097, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 1.895, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.352, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 2.641, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 15.225, + 10.512, + 9.869, + 6.742, + 31.876, + 31.876, + 31.876, + 31.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 18.303, + 31.876, + 31.876, + 31.876, + 31.876, + 31.566, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 18.404, + 31.876, + 31.876, + 31.876, + 31.876, + 31.465, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 17.452, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.541, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 17.086, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.906, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.293, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 17.7, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 19.386, + 31.876, + 31.876, + 31.876, + 31.876, + 30.483, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.006, + 22.408, + 17.817, + 24.96, + 31.876, + 5.358, + 31.876, + 22.334, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.09, + 21.122, + 26.598, + 31.876, + 31.876, + 31.876, + 28.936, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.049, + 8.037, + 21.429, + 31.876, + 31.876, + 31.876, + 31.876, + 20.354, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.38, + 18.101, + 31.876, + 31.876, + 31.876, + 31.876, + 31.388, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.5, + 18.603, + 31.876, + 31.876, + 31.876, + 31.876, + 30.766, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.181, + 8.624, + 20.991, + 27.189, + 31.876, + 31.876, + 31.876, + 24.76, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.132, + 19.436, + 31.876, + 31.876, + 31.876, + 31.876, + 29.301, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.615, + 21.032, + 31.876, + 31.876, + 31.876, + 31.876, + 27.223, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.725, + 15.069, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 2.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.751, + 20.119, + 28.581, + 31.876, + 31.876, + 31.876, + 31.294, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.738, + 12.117, + 26.02, + 31.876, + 31.876, + 31.876, + 31.876, + 9.995, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.123, + 20.777, + 31.876, + 31.876, + 31.876, + 31.876, + 26.969, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.292, + 20.534, + 31.876, + 31.876, + 31.876, + 31.876, + 27.043, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.715, + 21.28, + 31.876, + 31.876, + 31.876, + 31.876, + 25.875, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.883, + 21.31, + 31.876, + 31.876, + 31.876, + 31.876, + 25.676, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.777, + 20.16, + 31.876, + 31.876, + 31.876, + 31.876, + 26.932, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.424, + 22.35, + 31.876, + 31.876, + 31.876, + 31.876, + 24.095, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.638, + 22.832, + 31.876, + 31.876, + 31.876, + 31.876, + 23.4, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.763, + 22.924, + 31.876, + 31.876, + 31.876, + 31.876, + 23.183, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.599, + 12.464, + 23.196, + 31.876, + 31.876, + 31.876, + 31.876, + 12.61, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.79, + 21.307, + 31.876, + 31.876, + 31.876, + 31.876, + 24.773, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.749, + 20.538, + 31.876, + 31.876, + 31.876, + 31.876, + 25.582, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.069, + 21.391, + 28.331, + 31.876, + 31.876, + 31.876, + 27.955, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.942, + 20.637, + 27.404, + 31.876, + 31.876, + 31.876, + 29.763, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.103, + 20.859, + 31.876, + 31.876, + 31.876, + 31.876, + 24.907, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.654, + 22.665, + 31.876, + 31.876, + 31.876, + 31.876, + 13.049, + 9.502, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.656, + 22.754, + 31.876, + 31.876, + 31.876, + 31.876, + 22.46, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.758, + 21.794, + 31.876, + 31.876, + 31.876, + 31.876, + 23.317, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.802, + 12.383, + 26.552, + 31.876, + 31.876, + 31.876, + 31.876, + 6.133, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.595, + 25.037, + 31.876, + 31.876, + 31.876, + 31.876, + 19.237, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.448, + 23.377, + 31.876, + 31.876, + 31.876, + 31.876, + 21.044, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.935, + 25.388, + 31.876, + 31.876, + 31.876, + 31.876, + 18.546, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.956, + 24.779, + 31.876, + 31.876, + 31.876, + 31.876, + 19.134, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.862, + 23.101, + 31.876, + 31.876, + 31.876, + 31.876, + 20.906, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.068, + 23.511, + 25.978, + 31.876, + 31.876, + 31.876, + 26.189, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.397, + 24.875, + 31.876, + 31.876, + 31.876, + 31.876, + 18.598, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.72, + 25.163, + 31.876, + 31.876, + 31.876, + 31.876, + 17.986, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.855, + 25.259, + 31.876, + 31.876, + 31.876, + 31.876, + 17.755, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.075, + 23.983, + 31.876, + 31.876, + 31.876, + 31.876, + 20.812, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.823, + 24.142, + 31.876, + 31.876, + 31.876, + 31.876, + 15.091, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.03, + 25.165, + 31.876, + 31.876, + 31.876, + 31.876, + 17.674, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 24.845, + 23.148, + 31.876, + 10.299, + 31.876, + 31.876, + 23.453, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.301, + 24.984, + 23.14, + 31.876, + 31.876, + 31.876, + 26.32, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 24.366, + 31.876, + 11.311, + 1.359, + 4.486, + 2.099, + 8.289, + 8.164, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.412, + 26.719, + 31.876, + 31.876, + 31.876, + 31.876, + 17.738, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096, + 7.472, + 25.061, + 31.876, + 31.876, + 31.876, + 31.876, + 17.24, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.13, + 7.389, + 24.706, + 31.876, + 31.876, + 31.876, + 31.876, + 13.831, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.16, + 7.246, + 24.564, + 31.876, + 31.876, + 31.876, + 31.876, + 17.899, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.326, + 6.195, + 24.389, + 31.876, + 31.876, + 31.876, + 31.876, + 18.96, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.287, + 7.389, + 24.776, + 31.876, + 31.876, + 31.876, + 31.876, + 17.417, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.243, + 7.377, + 23.159, + 31.876, + 31.876, + 31.876, + 31.876, + 19.089, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.287, + 7.444, + 24.4, + 31.876, + 31.876, + 31.876, + 31.876, + 17.739, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.307, + 7.469, + 23.988, + 31.876, + 31.876, + 31.876, + 31.876, + 18.106, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.377, + 8.023, + 25.0, + 31.876, + 31.876, + 31.876, + 31.876, + 8.843, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.509, + 5.223, + 24.572, + 31.876, + 31.876, + 31.876, + 27.822, + 23.619, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.015, + 17.877, + 23.514, + 28.059, + 13.013, + 31.876, + 31.876, + 25.144, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.512, + 7.851, + 25.115, + 31.876, + 31.876, + 31.876, + 31.876, + 16.392, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.645, + 8.327, + 25.919, + 31.876, + 31.876, + 31.876, + 31.876, + 14.979, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.701, + 8.372, + 25.077, + 31.876, + 31.876, + 31.876, + 31.876, + 15.719, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.803, + 8.431, + 24.847, + 31.876, + 31.876, + 31.876, + 31.876, + 15.788, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.817, + 8.272, + 24.202, + 31.876, + 31.876, + 31.876, + 31.876, + 5.139, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.8, + 8.17, + 25.352, + 31.876, + 31.876, + 31.876, + 31.876, + 15.547, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.897, + 8.139, + 24.64, + 31.876, + 31.876, + 31.876, + 31.876, + 16.192, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.843, + 7.871, + 24.024, + 31.876, + 31.876, + 31.876, + 31.876, + 17.131, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.972, + 8.019, + 23.336, + 31.876, + 31.876, + 31.876, + 31.876, + 17.541, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.043, + 8.38, + 24.639, + 31.876, + 31.876, + 31.876, + 31.876, + 15.807, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.387, + 8.949, + 21.047, + 31.876, + 31.876, + 31.876, + 31.876, + 18.486, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.644, + 9.392, + 25.499, + 19.465, + 31.876, + 31.876, + 31.876, + 14.243, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.278, + 8.91, + 26.08, + 31.876, + 31.876, + 31.876, + 31.876, + 13.601, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.397, + 8.673, + 23.823, + 31.876, + 31.876, + 31.876, + 31.876, + 15.976, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.758, + 9.278, + 24.153, + 31.876, + 31.876, + 31.876, + 31.876, + 14.68, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.63, + 9.039, + 24.641, + 31.876, + 31.876, + 31.876, + 31.876, + 14.559, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.409, + 8.882, + 25.172, + 31.876, + 31.876, + 31.876, + 31.876, + 14.406, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.377, + 9.286, + 27.434, + 31.876, + 31.876, + 31.876, + 31.876, + 11.772, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.672, + 9.2, + 26.069, + 31.876, + 31.876, + 31.876, + 29.378, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.021, + 9.471, + 25.601, + 31.876, + 31.876, + 31.876, + 31.876, + 12.777, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.901, + 9.117, + 24.912, + 31.876, + 31.876, + 31.876, + 31.876, + 13.939, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.8, + 9.007, + 24.846, + 31.876, + 31.876, + 31.876, + 31.876, + 14.216, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.446, + 8.692, + 25.407, + 31.876, + 31.876, + 31.876, + 31.876, + 14.324, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.421, + 8.653, + 25.472, + 31.876, + 31.876, + 31.876, + 31.876, + 14.322, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.454, + 8.428, + 24.594, + 31.876, + 31.876, + 31.876, + 31.876, + 15.393, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.433, + 8.233, + 23.663, + 31.876, + 31.876, + 31.876, + 31.876, + 1.054, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.329, + 8.248, + 24.209, + 31.876, + 31.876, + 31.876, + 31.876, + 16.083, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.567, + 8.136, + 23.24, + 31.876, + 31.876, + 31.876, + 31.876, + 16.926, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.374, + 8.252, + 18.628, + 31.876, + 31.876, + 31.876, + 31.876, + 21.614, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.752, + 8.668, + 25.064, + 31.876, + 31.876, + 31.876, + 31.876, + 14.386, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.075, + 9.131, + 24.968, + 31.876, + 31.876, + 31.876, + 31.876, + 13.695, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.016, + 8.887, + 24.177, + 31.876, + 31.876, + 31.876, + 31.876, + 14.789, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.706, + 8.381, + 23.799, + 31.876, + 31.876, + 31.876, + 28.394, + -0.0, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.783, + 8.456, + 23.233, + 31.876, + 31.876, + 31.876, + 28.8, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.114, + 7.928, + 23.488, + 31.876, + 31.876, + 31.876, + 31.876, + 16.339, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.088, + 7.76, + 17.531, + 19.113, + 31.876, + 31.876, + 31.876, + 26.615, + 8.639, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.908, + 8.034, + 22.545, + 31.876, + 31.876, + 31.876, + 31.876, + 17.383, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.757, + 7.45, + 18.194, + 16.361, + 31.876, + 31.876, + 31.876, + 31.876, + 6.108, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.88, + 8.182, + 22.565, + 31.876, + 31.876, + 31.876, + 31.876, + 17.242, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.751, + 7.799, + 22.52, + 31.876, + 31.876, + 31.876, + 29.998, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.493, + 4.87, + 13.008, + 9.85, + 12.102, + 31.876, + 31.876, + 31.876, + 31.876, + 8.546, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.963, + 8.124, + 23.639, + 31.876, + 31.876, + 31.876, + 31.876, + 16.144, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.803, + 8.419, + 25.374, + 31.876, + 31.876, + 31.876, + 31.876, + 14.274, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.632, + 8.42, + 25.707, + 31.876, + 31.876, + 31.876, + 31.876, + 14.11, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.584, + 8.055, + 24.262, + 31.876, + 31.876, + 31.876, + 31.876, + 15.968, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.716, + 7.809, + 23.518, + 31.876, + 31.876, + 31.876, + 31.876, + 16.825, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.632, + 7.557, + 22.759, + 31.876, + 31.876, + 31.876, + 30.064, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.638, + 8.096, + 23.515, + 31.876, + 31.876, + 31.876, + 31.876, + 16.621, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.927, + 7.924, + 23.9, + 31.876, + 31.876, + 31.876, + 31.876, + 16.118, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.771, + 7.774, + 23.496, + 31.876, + 31.876, + 31.876, + 31.876, + 16.828, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.85, + 7.594, + 22.606, + 31.876, + 31.876, + 31.876, + 31.876, + 17.819, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.747, + 7.409, + 22.853, + 31.876, + 31.876, + 31.876, + 31.876, + 17.86, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.909, + 7.67, + 22.98, + 31.876, + 31.876, + 31.876, + 31.876, + 17.311, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.844, + 7.558, + 22.93, + 31.876, + 31.876, + 31.876, + 25.696, + 0.0, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.203, + 7.935, + 22.315, + 31.876, + 31.876, + 31.876, + 31.876, + 17.416, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.841, + 7.529, + 22.154, + 31.876, + 31.876, + 31.876, + 31.876, + 18.346, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.796, + 7.315, + 22.481, + 31.876, + 31.876, + 31.876, + 31.876, + 18.276, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.621, + 6.98, + 22.15, + 31.876, + 31.876, + 31.876, + 31.876, + 19.119, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.558, + 6.924, + 21.959, + 31.876, + 31.876, + 31.876, + 31.876, + 19.428, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.702, + 6.879, + 19.296, + 31.724, + 31.876, + 31.876, + 31.876, + 22.145, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.719, + 7.15, + 20.02, + 31.876, + 31.876, + 31.876, + 29.176, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.664, + 6.797, + 20.874, + 31.876, + 31.876, + 31.876, + 31.876, + 20.534, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.618, + 6.902, + 21.027, + 31.876, + 31.876, + 31.876, + 31.876, + 20.323, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.704, + 7.16, + 22.42, + 31.876, + 31.876, + 31.876, + 31.876, + 18.584, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.831, + 7.265, + 23.056, + 31.876, + 31.876, + 31.876, + 31.876, + 17.717, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.504, + 6.7, + 22.049, + 31.876, + 31.876, + 31.876, + 31.876, + 19.616, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.212, + 6.487, + 22.695, + 31.876, + 31.876, + 31.876, + 31.876, + 19.476, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.207, + 6.535, + 22.814, + 31.876, + 31.876, + 31.876, + 27.736, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.165, + 6.6, + 22.665, + 31.876, + 31.876, + 31.876, + 31.876, + 19.439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.152, + 6.486, + 21.85, + 31.876, + 31.876, + 31.876, + 31.876, + 20.382, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.558, + 6.661, + 20.26, + 31.876, + 31.876, + 31.876, + 29.589, + -0.0, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.975, + 7.552, + 19.96, + 31.876, + 31.876, + 31.876, + 31.876, + 20.382, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.496, + 6.561, + 20.993, + 31.876, + 31.876, + 31.876, + 31.876, + 20.82, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.217, + 6.214, + 21.535, + 31.876, + 31.876, + 31.876, + 31.876, + 20.904, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.397, + 6.445, + 21.148, + 31.876, + 31.876, + 31.876, + 29.312, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.436, + 5.334, + 17.213, + 13.688, + 31.876, + 31.876, + 31.876, + 31.876, + 12.198, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.687, + 7.026, + 21.413, + 31.876, + 31.876, + 31.876, + 31.876, + 19.743, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.146, + 6.292, + 21.875, + 31.876, + 31.876, + 31.876, + 31.876, + 20.556, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.059, + 6.008, + 21.7, + 31.876, + 31.876, + 31.876, + 31.876, + 21.102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.361, + 4.818, + 16.861, + 25.918, + 31.876, + 22.631, + 29.625, + 29.76, + 15.524, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.51, + 5.761, + 19.947, + 31.876, + 31.876, + 31.876, + 31.876, + 23.651, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.13, + 5.861, + 20.52, + 31.876, + 31.876, + 31.876, + 30.723, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.989, + 5.959, + 21.428, + 31.876, + 31.876, + 31.876, + 31.876, + 21.493, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.947, + 5.963, + 21.65, + 31.876, + 31.876, + 31.876, + 31.876, + 21.309, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.898, + 5.871, + 21.401, + 31.876, + 31.876, + 31.876, + 31.876, + 21.7, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.901, + 5.817, + 21.614, + 31.876, + 31.876, + 31.876, + 31.876, + 21.537, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.939, + 5.975, + 21.184, + 31.876, + 31.876, + 31.876, + 31.876, + 21.772, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.03, + 5.86, + 20.277, + 31.876, + 31.876, + 31.876, + 31.876, + 22.701, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.099, + 3.982, + 4.433, + 4.095, + 31.876, + 31.876, + 31.876, + 3.831, + 12.208, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.95, + 5.872, + 19.965, + 31.876, + 31.876, + 31.876, + 31.876, + 23.082, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.823, + 5.623, + 20.71, + 31.876, + 31.876, + 31.876, + 31.876, + 22.713, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.814, + 5.656, + 20.774, + 31.876, + 31.876, + 31.876, + 31.876, + 22.625, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.852, + 5.707, + 20.364, + 31.876, + 31.876, + 31.876, + 31.876, + 22.946, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.858, + 5.868, + 20.613, + 31.876, + 31.876, + 31.876, + 31.876, + 22.53, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.76, + 5.776, + 20.715, + 31.876, + 31.876, + 31.876, + 31.876, + 22.618, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.752, + 5.849, + 20.691, + 31.876, + 31.876, + 31.876, + 31.876, + 3.201, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.699, + 5.884, + 20.407, + 31.876, + 31.876, + 31.876, + 31.876, + 22.879, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.332, + 0.518, + 27.961, + 31.876, + 31.876, + 31.876, + 31.876, + 18.058, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.656, + 5.995, + 20.468, + 31.876, + 31.876, + 31.876, + 31.876, + 22.75, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.555, + 5.773, + 21.078, + 31.876, + 31.876, + 31.876, + 31.876, + 22.464, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.535, + 6.079, + 20.762, + 31.876, + 31.876, + 31.876, + 31.876, + 22.494, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.515, + 6.611, + 20.805, + 31.876, + 31.876, + 31.876, + 31.876, + 21.938, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.541, + 6.247, + 22.568, + 31.876, + 31.876, + 31.876, + 31.876, + 5.056, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.381, + 6.005, + 22.41, + 31.876, + 31.876, + 31.876, + 31.876, + 21.073, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.378, + 6.08, + 22.606, + 31.876, + 31.876, + 31.876, + 31.876, + 20.805, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.337, + 6.012, + 22.441, + 31.876, + 31.876, + 31.876, + 31.876, + 21.079, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.297, + 6.002, + 22.325, + 31.876, + 31.876, + 31.876, + 31.876, + 21.245, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.341, + 6.054, + 22.246, + 31.876, + 31.876, + 31.876, + 31.876, + 21.228, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.299, + 5.873, + 21.504, + 31.876, + 31.876, + 31.876, + 31.876, + 22.193, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.294, + 5.831, + 21.31, + 31.876, + 31.876, + 31.876, + 31.876, + 7.087, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.257, + 5.788, + 21.102, + 31.876, + 31.876, + 31.876, + 31.876, + 22.723, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.199, + 5.984, + 21.046, + 31.876, + 31.876, + 31.876, + 31.876, + 22.641, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.171, + 6.056, + 20.941, + 31.876, + 31.876, + 31.876, + 31.876, + 22.702, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.213, + 5.987, + 20.871, + 31.876, + 31.876, + 31.876, + 31.876, + 22.798, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.213, + 5.939, + 21.487, + 31.876, + 31.876, + 31.876, + 31.876, + 22.23, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.255, + 5.763, + 22.394, + 31.876, + 31.876, + 31.876, + 31.876, + 21.457, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.181, + 6.268, + 22.978, + 31.876, + 31.876, + 31.876, + 31.876, + 9.003, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.137, + 6.164, + 22.411, + 31.876, + 31.876, + 31.876, + 31.876, + 21.157, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.1, + 6.071, + 22.357, + 31.876, + 31.876, + 31.876, + 31.876, + 21.341, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.107, + 6.36, + 23.135, + 31.876, + 31.876, + 31.876, + 31.876, + 20.267, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067, + 6.321, + 22.723, + 31.876, + 31.876, + 31.876, + 31.876, + 20.758, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022, + 6.028, + 21.212, + 31.876, + 31.876, + 31.876, + 31.876, + 22.607, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.035, + 20.671, + 31.814, + 31.876, + 31.876, + 31.876, + 23.226, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.952, + 21.263, + 31.876, + 31.876, + 31.876, + 31.876, + 15.028, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.993, + 21.914, + 31.876, + 31.876, + 31.876, + 31.876, + 21.962, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.041, + 21.757, + 31.876, + 31.876, + 31.876, + 31.876, + 22.071, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.692, + 21.432, + 31.876, + 31.876, + 31.876, + 31.876, + 25.745, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.98, + 20.555, + 31.876, + 31.876, + 31.876, + 31.876, + 23.333, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.473, + 22.975, + 31.876, + 31.876, + 31.876, + 31.876, + 20.421, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.518, + 23.237, + 31.876, + 31.876, + 31.876, + 31.876, + 13.137, + 1.361, + 1.053, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.336, + 22.544, + 31.876, + 31.876, + 31.876, + 31.876, + 20.99, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.369, + 22.729, + 31.876, + 31.876, + 31.876, + 31.876, + 16.958, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.275, + 22.14, + 31.876, + 31.876, + 31.876, + 31.876, + 21.453, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.309, + 22.121, + 31.876, + 31.876, + 31.876, + 31.876, + 21.439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.405, + 22.431, + 31.876, + 31.876, + 31.876, + 31.876, + 21.032, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.856, + 24.35, + 31.876, + 31.876, + 31.876, + 31.876, + 18.663, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.023, + 24.748, + 31.876, + 31.876, + 31.876, + 31.876, + 18.099, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.871, + 23.893, + 31.876, + 31.876, + 31.876, + 31.876, + 19.105, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.77, + 24.113, + 31.876, + 31.876, + 31.876, + 31.876, + 18.986, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.558, + 23.506, + 31.876, + 31.876, + 31.876, + 31.876, + 19.805, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.338, + 22.971, + 31.876, + 31.876, + 31.876, + 31.876, + 20.56, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.947, + 20.988, + 31.876, + 31.876, + 31.876, + 31.876, + 22.934, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.144, + 25.521, + 31.876, + 31.876, + 31.876, + 31.876, + 17.204, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.619, + 26.948, + 31.876, + 31.876, + 31.876, + 31.876, + 15.302, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.555, + 26.529, + 31.876, + 31.876, + 31.876, + 31.876, + 15.785, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.357, + 25.677, + 31.876, + 31.876, + 31.876, + 31.876, + 16.836, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.825, + 23.945, + 31.876, + 31.876, + 31.876, + 31.876, + 19.1, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.401, + 26.138, + 31.876, + 31.876, + 31.876, + 31.876, + 16.33, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.235, + 25.155, + 31.876, + 31.876, + 31.876, + 31.876, + 17.479, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.246, + 22.512, + 31.876, + 31.876, + 31.876, + 31.876, + 21.11, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.55, + 26.843, + 31.876, + 31.876, + 31.876, + 31.876, + 15.477, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.514, + 26.469, + 31.876, + 31.876, + 31.876, + 31.876, + 15.886, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.346, + 26.295, + 31.876, + 31.876, + 31.876, + 31.876, + 16.228, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.829, + 24.531, + 31.876, + 31.876, + 31.876, + 31.876, + 18.509, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.389, + 25.824, + 31.876, + 31.876, + 31.876, + 31.876, + 16.657, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.401, + 22.222, + 31.876, + 31.876, + 31.876, + 31.876, + 22.246, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.541, + 24.072, + 31.876, + 31.876, + 31.876, + 31.876, + 19.256, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.62, + 24.403, + 31.876, + 31.876, + 31.876, + 31.876, + 18.846, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.821, + 24.395, + 31.876, + 31.876, + 31.876, + 31.876, + 18.653, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.05, + 21.433, + 31.876, + 31.876, + 31.876, + 31.876, + 25.386, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.6, + 24.589, + 31.876, + 31.876, + 31.876, + 31.876, + 18.68, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.173, + 24.948, + 31.876, + 31.876, + 31.876, + 31.876, + 18.748, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.444, + 3.621, + 16.532, + 31.876, + 26.745, + 31.876, + 31.876, + 10.141, + 15.479, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.207, + 27.584, + 31.876, + 31.876, + 31.876, + 31.876, + 6.826, + 8.252, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.273, + 27.146, + 31.876, + 31.876, + 31.876, + 31.876, + 15.45, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.92, + 26.362, + 31.876, + 31.876, + 31.876, + 31.876, + 16.587, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.9, + 26.471, + 31.876, + 31.876, + 31.876, + 31.876, + 16.498, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.528, + 25.611, + 31.876, + 31.876, + 31.876, + 31.876, + 17.731, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.405, + 25.59, + 31.876, + 31.876, + 31.876, + 31.876, + 17.875, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.586, + 26.121, + 31.876, + 31.876, + 31.876, + 31.876, + 17.162, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.505, + 26.008, + 31.876, + 31.876, + 31.876, + 31.876, + 17.357, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.348, + 25.13, + 31.876, + 31.876, + 31.876, + 31.876, + 18.391, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.446, + 22.009, + 31.876, + 31.876, + 31.876, + 31.876, + 22.414, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.776, + 24.677, + 31.876, + 31.876, + 31.876, + 31.876, + 19.416, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.86, + 25.752, + 31.876, + 31.876, + 31.876, + 31.876, + 18.258, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.928, + 26.126, + 31.876, + 31.876, + 31.876, + 31.876, + 17.815, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.302, + 25.638, + 31.876, + 31.876, + 31.876, + 31.876, + 18.93, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.702, + 25.126, + 31.876, + 31.876, + 31.876, + 31.876, + 20.041, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.308, + 24.871, + 31.876, + 31.876, + 31.876, + 31.876, + 20.69, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 4.037, + 25.202, + 31.876, + 31.876, + 31.876, + 31.876, + 20.629, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.894, + 25.228, + 31.876, + 31.876, + 31.876, + 31.876, + 20.748, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.891, + 22.647, + 31.876, + 31.876, + 31.876, + 31.876, + 24.331, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.649, + 22.347, + 31.876, + 31.876, + 31.876, + 31.876, + 24.873, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.595, + 23.098, + 31.876, + 31.876, + 31.876, + 31.876, + 24.176, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.137, + 26.602, + 31.876, + 31.876, + 31.876, + 31.876, + 20.13, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.921, + 26.425, + 31.876, + 31.876, + 31.876, + 31.876, + 20.523, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.563, + 25.599, + 31.876, + 31.876, + 31.876, + 31.876, + 21.707, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.37, + 25.363, + 31.876, + 31.876, + 31.876, + 31.876, + 22.137, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.221, + 24.891, + 31.876, + 31.876, + 31.876, + 31.876, + 22.756, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.887, + 24.365, + 31.876, + 31.876, + 31.876, + 31.876, + 23.617, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.08, + 23.317, + 31.876, + 31.876, + 31.876, + 31.876, + 25.472, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.421, + 26.249, + 31.876, + 31.876, + 31.876, + 31.876, + 22.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.177, + 25.33, + 31.876, + 31.876, + 31.876, + 31.876, + 23.362, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.843, + 23.879, + 31.876, + 31.876, + 31.876, + 31.876, + 25.147, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.677, + 23.366, + 31.876, + 31.876, + 31.876, + 31.876, + 25.826, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.622, + 23.439, + 31.876, + 31.876, + 31.876, + 31.876, + 25.808, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.24, + 22.932, + 31.876, + 31.876, + 31.876, + 31.876, + 26.697, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.33, + 22.336, + 31.876, + 31.876, + 31.876, + 31.876, + 27.203, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 22.931, + 31.876, + 31.876, + 31.876, + 31.876, + 26.938, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 17.899, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 0.094, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 18.102, + 21.929, + 31.876, + 31.876, + 31.876, + 31.876, + 9.838, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.838, + 22.472, + 31.876, + 31.876, + 31.876, + 31.876, + 19.559, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.588, + 31.876, + 30.315, + 31.876, + 31.876, + 31.876, + 17.966, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 19.789, + 31.876, + 31.876, + 31.876, + 31.876, + 30.08, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 23.431, + 31.876, + 31.876, + 31.876, + 31.876, + 26.438, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 22.056, + 31.876, + 31.876, + 31.876, + 31.876, + 27.813, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.745, + 24.869, + 31.876, + 31.876, + 31.876, + 27.948, + 19.744, + 1.439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 19.208, + 17.805, + 31.876, + 31.876, + 31.876, + 13.095, + 31.637, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 20.198, + 31.876, + 31.876, + 31.876, + 31.876, + 29.671, + -0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 19.415, + 31.876, + 31.876, + 31.876, + 31.876, + 30.454, + 0.0, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.339, + 24.146, + 31.876, + 31.876, + 31.876, + 31.876, + 19.383, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 19.857, + 31.876, + 31.876, + 31.876, + 31.876, + 30.012, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.402, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.591, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.397, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 11.596, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.048, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 10.944, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.16, + 20.946, + 31.876, + 31.876, + 31.876, + 31.876, + 23.763, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 5.253, + 22.21, + 31.876, + 31.876, + 31.876, + 31.876, + 22.407, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 16.053, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 1.94, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.979, + 11.424, + 17.071, + 0.776, + 4.615, + 1.697, + 2.141, + 6.267, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 14.09, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 3.902, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.96, + 6.413, + 5.631, + 9.193, + 31.656, + 30.277, + 31.876, + 29.202, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 13.526, + 0.29, + 31.876, + 27.618, + 31.876, + 31.876, + 16.369, + 0.332, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 14.064, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 3.929, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 14.028, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 3.965, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 13.197, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 4.796, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 13.26, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 4.733, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.884, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 5.109, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 12.11, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 5.882, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.255, + 31.876, + 31.876, + 29.739, + 31.876, + 1.816, + 15.591, + 5.215, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.84, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 6.153, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 11.829, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 6.164, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 10.827, + 16.443, + 31.876, + 31.876, + 31.876, + 31.876, + 22.599, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.456, + 18.183, + 31.876, + 31.876, + 31.876, + 31.876, + 5.219, + 17.011, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 10.511, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 7.482, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 10.839, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 7.154, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 7.502, + 5.092, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 5.4, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.959, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 8.034, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.435, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 8.558, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.006, + 15.722, + 24.133, + 31.876, + 31.876, + 31.876, + 31.876, + 7.008, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.368, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.625, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.541, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.451, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.246, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.747, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 9.088, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 8.905, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.878, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.115, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 8.098, + 31.876, + 31.876, + 31.876, + 31.876, + 31.876, + 9.895, + -0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.302, + 8.694, + 11.926, + 25.307, + 31.876, + 31.876, + 31.369, + 16.333, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.511, + 20.929, + 31.876, + 25.548, + 10.876, + 10.004, + 2.77, + 6.76, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.121, + 0.44, + 11.828, + 5.469, + 8.316, + 3.164, + 7.318, + 30.83, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.351, + 2.691, + 17.047, + 3.41, + 10.469, + 10.636, + 8.969, + 6.265, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 6.485, + 30.981, + 31.876, + 31.876, + 31.876, + 31.876, + 12.403, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "electric_curtailed_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "lifecycle_om_cost_after_tax": 12772.0, + "lcoe_per_kwh": 0.0283 + }, + { + "electric_to_grid_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "production_factor_series": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013705, + 0.074601, + 0.23405199999999998, + 0.37140100000000004, + 0.457396, + 0.486137, + 0.465086, + 0.387321, + 0.251484, + 0.054393000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013573, + 0.07456399999999999, + 0.236565, + 0.375486, + 0.46325099999999997, + 0.492928, + 0.469034, + 0.392412, + 0.256565, + 0.008654, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013533, + 0.078678, + 0.239314, + 0.38372, + 0.477065, + 0.508258, + 0.48821, + 0.409203, + 0.269851, + 0.060499000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009775, + 0.07675799999999999, + 0.242274, + 0.38363099999999994, + 0.471344, + 0.50049, + 0.479285, + 0.401763, + 0.26569600000000004, + 0.059933999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013391, + 0.07506600000000001, + 0.235656, + 0.372508, + 0.458604, + 0.48693000000000003, + 0.385089, + 0.276004, + 0.26081, + 0.032286999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012159000000000001, + 0.07479999999999999, + 0.232794, + 0.284947, + 0.32049, + 0.386586, + 0.462574, + 0.390855, + 0.261658, + 0.063405, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008794, + 0.07251099999999999, + 0.22912000000000002, + 0.364094, + 0.45033100000000004, + 0.480558, + 0.46354199999999995, + 0.390471, + 0.25952499999999995, + 0.065712, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008881, + 0.075806, + 0.240455, + 0.38718400000000003, + 0.481885, + 0.5135449999999999, + 0.494168, + 0.420124, + 0.281206, + 0.07649299999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013537, + 0.07942199999999999, + 0.236983, + 0.376257, + 0.466315, + 0.496591, + 0.478922, + 0.406902, + 0.275928, + 0.080101, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012332000000000001, + 0.07343300000000001, + 0.235072, + 0.325494, + 0.359965, + 0.426243, + 0.332669, + 0.30863999999999997, + 0.180172, + 0.030708, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005305, + 0.030978000000000002, + 0.13494, + 0.35726600000000003, + 0.446854, + 0.392215, + 0.374983, + 0.396432, + 0.244477, + 0.081755, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011404, + 0.07647, + 0.23719900000000002, + 0.37629199999999996, + 0.46577199999999996, + 0.49602300000000005, + 0.476009, + 0.405753, + 0.277358, + 0.089238, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010485, + 0.07609300000000001, + 0.235599, + 0.370807, + 0.458562, + 0.49013, + 0.47476, + 0.407654, + 0.27910199999999996, + 0.08927, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009601, + 0.076492, + 0.241664, + 0.38276299999999996, + 0.402656, + 0.384635, + 0.361574, + 0.354605, + 0.230766, + 0.100913, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01377, + 0.07631, + 0.227736, + 0.298361, + 0.380073, + 0.279534, + 0.466037, + 0.19444999999999998, + 0.030479, + 0.020027, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010573, + 0.07908, + 0.23432, + 0.375329, + 0.465676, + 0.499102, + 0.484575, + 0.41645, + 0.286861, + 0.100812, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009927, + 0.076675, + 0.23230099999999998, + 0.366776, + 0.454639, + 0.40252899999999997, + 0.47434899999999997, + 0.410881, + 0.284295, + 0.103963, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013154, + 0.080736, + 0.18712, + 0.320651, + 0.390661, + 0.40553500000000003, + 0.303653, + 0.27660500000000005, + 0.13714500000000002, + 0.021137, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014542999999999999, + 0.045953, + 0.146256, + 0.231821, + 0.23963800000000002, + 0.495433, + 0.482431, + 0.268529, + 0.20706200000000002, + 0.02103, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012747, + 0.08354900000000001, + 0.243511, + 0.385189, + 0.476558, + 0.260231, + 0.063109, + 0.089108, + 0.009399, + 0.013535, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017022, + 0.087987, + 0.215061, + 0.331837, + 0.39191000000000004, + 0.423086, + 0.35239299999999996, + 0.279007, + 0.249886, + 0.122694, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011367, + 0.084816, + 0.248946, + 0.386762, + 0.477277, + 0.5121330000000001, + 0.49658199999999997, + 0.432683, + 0.30964600000000003, + 0.123934, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011921, + 0.084701, + 0.244281, + 0.305247, + 0.39495800000000003, + 0.385259, + 0.369033, + 0.339217, + 0.217526, + 0.045221, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01809, + 0.08809399999999999, + 0.144143, + 0.218017, + 0.232237, + 0.24940199999999998, + 0.215239, + 0.087488, + 0.046853, + 0.018527000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.056672, + 0.134802, + 0.10626000000000001, + 0.171888, + 0.005713, + 0.523328, + 0.456557, + 0.32531, + 0.133659, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019056999999999998, + 0.096346, + 0.226511, + 0.027392, + 0.396443, + 0.412994, + 0.355983, + 0.013779999999999999, + 0.31063799999999997, + 0.11559699999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01713, + 0.10588299999999999, + 0.283263, + 0.43764299999999995, + 0.532924, + 0.5685009999999999, + 0.5544969999999999, + 0.48929, + 0.356134, + 0.157536, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012151, + 0.100106, + 0.280845, + 0.431555, + 0.524557, + 0.5613049999999999, + 0.546412, + 0.479143, + 0.351254, + 0.159108, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012673, + 0.09971899999999999, + 0.277466, + 0.421192, + 0.506313, + 0.537791, + 0.416192, + 0.39581700000000003, + 0.213088, + 0.063516, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022108, + 0.101745, + 0.271923, + 0.355839, + 0.4254, + 0.44798899999999997, + 0.421296, + 0.36825, + 0.263784, + 0.08663, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026926, + 0.186128, + 0.300543, + 0.525918, + 0.56604, + 0.5532809999999999, + 0.487022, + 0.360196, + 0.142864, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024475, + 0.114455, + 0.274424, + 0.41093999999999997, + 0.494405, + 0.5325460000000001, + 0.523793, + 0.467125, + 0.347474, + 0.15481999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017414000000000002, + 0.112286, + 0.295159, + 0.37849900000000003, + 0.444183, + 0.449854, + 0.549088, + 0.483067, + 0.364516, + 0.18149700000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014676, + 0.11349, + 0.29292, + 0.43879700000000005, + 0.525518, + 0.559625, + 0.544308, + 0.483025, + 0.366017, + 0.185304, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015785, + 0.110384, + 0.287053, + 0.431519, + 0.516851, + 0.551964, + 0.536854, + 0.475623, + 0.36002300000000004, + 0.180975, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027322, + 0.106686, + 0.221879, + 0.358874, + 0.42677800000000005, + 0.424599, + 0.379608, + 0.36484, + 0.232396, + 0.079893, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016762, + 0.115665, + 0.286563, + 0.427659, + 0.514, + 0.5529729999999999, + 0.46337, + 0.39853500000000003, + 0.30186799999999997, + 0.126631, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028050000000000002, + 0.113648, + 0.247106, + 0.35960000000000003, + 0.456798, + 0.407777, + 0.392478, + 0.31872500000000004, + 0.282674, + 0.117203, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02841, + 0.110138, + 0.22812000000000002, + 0.28460199999999997, + 0.264993, + 0.408599, + 0.433709, + 0.285274, + 0.242469, + 0.078884, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021643, + 0.11706, + 0.248244, + 0.324428, + 0.416823, + 0.161232, + 0.17858600000000002, + 0.10529999999999999, + 0.08764799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023904, + 0.112054, + 0.088348, + 0.182963, + 0.388519, + 0.38054000000000004, + 0.421734, + 0.366959, + 0.292127, + 0.053427999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.131173, + 0.307336, + 0.45533100000000004, + 0.543847, + 0.583844, + 0.5706789999999999, + 0.510041, + 0.38923599999999997, + 0.2002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.029782, + 0.141276, + 0.24609899999999998, + 0.453032, + 0.540029, + 0.5783680000000001, + 0.571065, + 0.50799, + 0.387659, + 0.015945, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021381, + 0.142064, + 0.321149, + 0.26601600000000003, + 0.555209, + 0.595163, + 0.585591, + 0.5239539999999999, + 0.321892, + 0.211772, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020442000000000002, + 0.146122, + 0.33269299999999996, + 0.483154, + 0.5729, + 0.610606, + 0.598505, + 0.533627, + 0.415801, + 0.22752799999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036664, + 0.146971, + 0.330699, + 0.470693, + 0.553535, + 0.58847, + 0.572798, + 0.510336, + 0.3969, + 0.22013999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01758, + 0.144891, + 0.32424200000000003, + 0.46518400000000004, + 0.549768, + 0.588151, + 0.5769690000000001, + 0.5154310000000001, + 0.402216, + 0.21935, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020210000000000002, + 0.149911, + 0.32907600000000004, + 0.473384, + 0.556753, + 0.591016, + 0.577866, + 0.51336, + 0.33593900000000004, + 0.054595, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040764, + 0.140206, + 0.244561, + 0.33951299999999995, + 0.321813, + 0.223732, + 0.398168, + 0.398206, + 0.311401, + 0.155414, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030052, + 0.023899999999999998, + 0.031553, + 0.10640300000000001, + 0.47886399999999996, + 0.419814, + 0.5250929999999999, + 0.412961, + 0.23096799999999998, + 0.009188, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024891, + 0.164969, + 0.34276999999999996, + 0.481731, + 0.564739, + 0.6018089999999999, + 0.59189, + 0.53458, + 0.419827, + 0.242513, + 0.013927, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031445, + 0.167547, + 0.338192, + 0.470704, + 0.5563440000000001, + 0.597555, + 0.5920599999999999, + 0.53664, + 0.425818, + 0.247935, + 0.017277999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036224, + 0.11881399999999999, + 0.13659100000000002, + 0.09934399999999999, + 0.407882, + 0.489748, + 0.466408, + 0.377869, + 0.301842, + 0.154448, + 0.002519, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027815000000000003, + 0.18684399999999998, + 0.385973, + 0.535389, + 0.628553, + 0.671049, + 0.662512, + 0.598773, + 0.47758100000000003, + 0.282374, + 0.008874, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027782, + 0.185994, + 0.377728, + 0.516644, + 0.591759, + 0.6174729999999999, + 0.596564, + 0.541605, + 0.442256, + 0.269912, + 0.00926, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030081, + 0.185721, + 0.373844, + 0.516821, + 0.60485, + 0.643239, + 0.493906, + 0.118715, + 0.03814, + 0.061643, + 0.022768999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03462, + 0.190088, + 0.373139, + 0.510812, + 0.5971770000000001, + 0.635759, + 0.6247659999999999, + 0.5657279999999999, + 0.45271300000000003, + 0.269868, + 0.032112, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005118, + 0.201511, + 0.39752, + 0.451288, + 0.500564, + 0.67562, + 0.664748, + 0.599675, + 0.048753, + 0.05861, + 0.003065, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036647, + 0.208921, + 0.407147, + 0.550822, + 0.641482, + 0.681517, + 0.67192, + 0.6086900000000001, + 0.48942899999999995, + 0.008179, + 0.021701, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030795000000000003, + 0.17751499999999998, + 0.210011, + 0.29329500000000003, + 0.41720100000000004, + 0.08020999999999999, + 0.43029199999999995, + 0.287803, + 0.093394, + 0.132103, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.058982999999999994, + 0.17430500000000002, + 0.271551, + 0.361361, + 0.461389, + 0.420334, + 0.405386, + 0.29732600000000003, + 0.211302, + 0.097293, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0012909999999999998, + 0.06401000000000001, + 0.177357, + 0.314271, + 0.45323399999999997, + 0.500051, + 0.500418, + 0.5792039999999999, + 0.45652, + 0.288115, + 0.12956800000000002, + 0.005171, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006144, + 0.04692, + 0.21480000000000002, + 0.31833999999999996, + 0.440479, + 0.499875, + 0.540289, + 0.440021, + 0.39847699999999997, + 0.44712999999999997, + 0.27590800000000004, + 0.043274, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007905, + 0.04972699999999999, + 0.218552, + 0.390521, + 0.512571, + 0.428192, + 0.627538, + 0.619112, + 0.467811, + 0.447787, + 0.13911500000000002, + 0.044365, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003424, + 0.068493, + 0.18090299999999998, + 0.280329, + 0.515528, + 0.59664, + 0.519968, + 0.627435, + 0.564834, + 0.449529, + 0.279714, + 0.048554, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004816, + 0.057529000000000004, + 0.237245, + 0.420692, + 0.468113, + 0.526609, + 0.5061840000000001, + 0.5114569999999999, + 0.499562, + 0.37706799999999996, + 0.302211, + 0.009085000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004727, + 0.058847000000000003, + 0.248744, + 0.439004, + 0.568432, + 0.646255, + 0.675528, + 0.6595599999999999, + 0.5979009999999999, + 0.483367, + 0.241844, + 0.03968, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00552, + 0.066119, + 0.239791, + 0.424769, + 0.54723, + 0.616808, + 0.632577, + 0.604118, + 0.553928, + 0.358224, + 0.228617, + 0.059457, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005409, + 0.063765, + 0.213755, + 0.42602100000000004, + 0.55041, + 0.628226, + 0.658216, + 0.646381, + 0.5819500000000001, + 0.46966699999999995, + 0.299414, + 0.067026, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007859, + 0.079239, + 0.21631999999999998, + 0.445666, + 0.485724, + 0.5086229999999999, + 0.573986, + 0.504964, + 0.461325, + 0.319447, + 0.221297, + 0.043676, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008431, + 0.072574, + 0.261272, + 0.448379, + 0.575021, + 0.653971, + 0.684628, + 0.665005, + 0.599789, + 0.48476400000000003, + 0.310596, + 0.07661499999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010326, + 0.07823000000000001, + 0.264386, + 0.443178, + 0.569605, + 0.648397, + 0.6833490000000001, + 0.668256, + 0.602636, + 0.48953199999999997, + 0.31743299999999997, + 0.086202, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011273, + 0.08039400000000001, + 0.26965100000000003, + 0.445969, + 0.5579400000000001, + 0.63063, + 0.660633, + 0.650582, + 0.594221, + 0.48505200000000004, + 0.31735800000000003, + 0.08887300000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011035999999999999, + 0.082455, + 0.27595, + 0.45840499999999995, + 0.583032, + 0.659686, + 0.686682, + 0.67106, + 0.601915, + 0.48645900000000003, + 0.317927, + 0.08652800000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015470000000000001, + 0.09219100000000001, + 0.270867, + 0.43257100000000004, + 0.5452859999999999, + 0.608746, + 0.649475, + 0.644536, + 0.591488, + 0.488066, + 0.326347, + 0.09752899999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011873, + 0.090024, + 0.290086, + 0.471598, + 0.596995, + 0.6781029999999999, + 0.71105, + 0.695723, + 0.6337670000000001, + 0.462445, + 0.238613, + 0.069048, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014958, + 0.098858, + 0.299639, + 0.485832, + 0.608818, + 0.6839500000000001, + 0.708388, + 0.6860510000000001, + 0.624244, + 0.5110520000000001, + 0.34604599999999996, + 0.11131100000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013971, + 0.100914, + 0.302022, + 0.48463, + 0.606822, + 0.6812659999999999, + 0.70505, + 0.678236, + 0.608816, + 0.497981, + 0.337901, + 0.108758, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021276, + 0.101338, + 0.22406600000000002, + 0.43307799999999996, + 0.522553, + 0.537649, + 0.554702, + 0.546269, + 0.43381400000000003, + 0.48973, + 0.330413, + 0.101726, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016652, + 0.10463599999999999, + 0.292031, + 0.4582, + 0.575189, + 0.65073, + 0.682355, + 0.670298, + 0.606008, + 0.49156099999999997, + 0.322812, + 0.091889, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023920999999999998, + 0.117723, + 0.29496100000000003, + 0.452698, + 0.551821, + 0.616154, + 0.6573289999999999, + 0.657257, + 0.6048150000000001, + 0.495918, + 0.330778, + 0.101657, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021835999999999998, + 0.11727599999999999, + 0.254362, + 0.37263799999999997, + 0.5479310000000001, + 0.552898, + 0.56326, + 0.528413, + 0.512426, + 0.478205, + 0.227071, + 0.061214, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023441, + 0.12050799999999999, + 0.257543, + 0.419228, + 0.581638, + 0.6491480000000001, + 0.668874, + 0.6473289999999999, + 0.43333, + 0.42192799999999997, + 0.239646, + 0.092279, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024099, + 0.12409999999999999, + 0.3028, + 0.46264, + 0.5890639999999999, + 0.666541, + 0.698956, + 0.603546, + 0.6131570000000001, + 0.50345, + 0.331671, + 0.10102599999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023521, + 0.127137, + 0.324583, + 0.49947699999999995, + 0.623681, + 0.70382, + 0.186839, + 0.452007, + 0.468528, + 0.31955900000000004, + 0.125834, + 0.106979, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026497, + 0.13375, + 0.329346, + 0.49527499999999997, + 0.6074729999999999, + 0.6777369999999999, + 0.712835, + 0.698765, + 0.6346499999999999, + 0.5178440000000001, + 0.135437, + 0.115047, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02894, + 0.141098, + 0.32215699999999997, + 0.47425599999999996, + 0.578619, + 0.571686, + 0.5936889999999999, + 0.566261, + 0.5467190000000001, + 0.481211, + 0.32098000000000004, + 0.109796, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026094000000000003, + 0.122821, + 0.263529, + 0.468343, + 0.59213, + 0.642232, + 0.535741, + 0.5812, + 0.613512, + 0.465146, + 0.213027, + 0.052987, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021868, + 0.14995599999999998, + 0.359341, + 0.530941, + 0.651419, + 0.727577, + 0.7543730000000001, + 0.7325320000000001, + 0.666609, + 0.5489160000000001, + 0.38001100000000004, + 0.14592, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023764, + 0.146091, + 0.34283800000000003, + 0.509468, + 0.629578, + 0.7069160000000001, + 0.738341, + 0.728011, + 0.663846, + 0.544945, + 0.004889999999999999, + 0.0024980000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026183, + 0.158608, + 0.37000900000000003, + 0.545673, + 0.66818, + 0.746845, + 0.773058, + 0.753529, + 0.681693, + 0.562936, + 0.387887, + 0.14645, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023395, + 0.15865600000000002, + 0.362851, + 0.526616, + 0.639023, + 0.704991, + 0.723879, + 0.5900259999999999, + 0.641455, + 0.530254, + 0.371567, + 0.14645599999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031061, + 0.157817, + 0.30185, + 0.411775, + 0.5752079999999999, + 0.6467350000000001, + 0.6852910000000001, + 0.6791739999999999, + 0.6259009999999999, + 0.516709, + 0.360927, + 0.135713, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03795900000000001, + 0.171422, + 0.275393, + 0.44304000000000004, + 0.623169, + 0.698834, + 0.731831, + 0.717963, + 0.655362, + 0.544092, + 0.37787200000000004, + 0.144077, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03893, + 0.179918, + 0.382533, + 0.548155, + 0.666135, + 0.740149, + 0.770752, + 0.752019, + 0.682809, + 0.33640800000000004, + 0.37593099999999996, + 0.141541, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.042182000000000004, + 0.189371, + 0.38854500000000003, + 0.5540259999999999, + 0.673661, + 0.744909, + 0.768317, + 0.744909, + 0.6738869999999999, + 0.5540499999999999, + 0.379478, + 0.148197, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038577, + 0.186808, + 0.386587, + 0.5429700000000001, + 0.6518440000000001, + 0.712015, + 0.727206, + 0.704521, + 0.644569, + 0.541359, + 0.381916, + 0.153401, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043635, + 0.183149, + 0.36744299999999996, + 0.519277, + 0.628707, + 0.700329, + 0.7275689999999999, + 0.7112229999999999, + 0.644624, + 0.527949, + 0.372869, + 0.148728, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04131, + 0.186078, + 0.37358800000000003, + 0.524791, + 0.6358010000000001, + 0.708996, + 0.7407720000000001, + 0.726808, + 0.6592279999999999, + 0.539402, + 0.34048399999999995, + 0.144034, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034881, + 0.191845, + 0.38702499999999995, + 0.5428339999999999, + 0.658025, + 0.7319070000000001, + 0.763968, + 0.744535, + 0.677806, + 0.5632229999999999, + 0.401339, + 0.169142, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00039600000000000003, + 0.192207, + 0.271424, + 0.552767, + 0.148936, + 0.415319, + 0.773792, + 0.753583, + 0.5803429999999999, + 0.376468, + 0.061812, + 0.0025710000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052466, + 0.203787, + 0.272549, + 0.553198, + 0.669085, + 0.739509, + 0.654273, + 0.738874, + 0.389772, + 0.199123, + 0.19241399999999997, + 0.038098999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00040100000000000004, + 0.203654, + 0.398297, + 0.16302, + 0.020974, + 0.067309, + 0.031985, + 0.122739, + 0.12185299999999999, + 0.233363, + 0.08086, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.060877, + 0.21315299999999998, + 0.422047, + 0.581409, + 0.691622, + 0.761206, + 0.782611, + 0.757746, + 0.6877759999999999, + 0.575613, + 0.410334, + 0.18223699999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0019850000000000002, + 0.048951999999999996, + 0.207012, + 0.397044, + 0.538385, + 0.6259779999999999, + 0.675476, + 0.708394, + 0.704326, + 0.6516219999999999, + 0.550508, + 0.392121, + 0.173291, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0024860000000000004, + 0.046847, + 0.20609, + 0.391963, + 0.533886, + 0.6323479999999999, + 0.6880510000000001, + 0.700456, + 0.687766, + 0.635308, + 0.534982, + 0.386715, + 0.172867, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002931, + 0.043119, + 0.206156, + 0.389009, + 0.519088, + 0.6072000000000001, + 0.665234, + 0.701789, + 0.699568, + 0.645134, + 0.542085, + 0.392262, + 0.182274, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005351, + 0.060467, + 0.20973599999999998, + 0.392175, + 0.458656, + 0.540868, + 0.694238, + 0.715603, + 0.702111, + 0.64374, + 0.541037, + 0.291219, + 0.179203, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00479, + 0.047118, + 0.213582, + 0.398843, + 0.535172, + 0.626042, + 0.676197, + 0.681242, + 0.64915, + 0.592055, + 0.500218, + 0.354741, + 0.16153499999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0037679999999999996, + 0.05458, + 0.210573, + 0.38662799999999997, + 0.523466, + 0.633501, + 0.685278, + 0.689722, + 0.653317, + 0.5832820000000001, + 0.50213, + 0.374054, + 0.180284, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003992, + 0.050055999999999996, + 0.21599000000000002, + 0.395171, + 0.524086, + 0.612742, + 0.661537, + 0.6793020000000001, + 0.666188, + 0.6166269999999999, + 0.52232, + 0.38533100000000003, + 0.185364, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003901, + 0.051758000000000005, + 0.215528, + 0.38708499999999996, + 0.523313, + 0.628884, + 0.692399, + 0.7189059999999999, + 0.704739, + 0.644846, + 0.5360069999999999, + 0.396106, + 0.18823099999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005193, + 0.062483, + 0.229603, + 0.413054, + 0.549671, + 0.651916, + 0.717237, + 0.7399779999999999, + 0.733392, + 0.671326, + 0.566057, + 0.418128, + 0.202738, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007494, + 0.07127800000000001, + 0.232315, + 0.399829, + 0.549961, + 0.567561, + 0.37122000000000005, + 0.438787, + 0.480336, + 0.180307, + 0.16791499999999998, + 0.108783, + 0.027759, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07452500000000001, + 0.198577, + 0.287292, + 0.34908, + 0.186477, + 0.45565100000000003, + 0.589216, + 0.544889, + 0.3357, + 0.399623, + 0.27202499999999996, + 0.200625, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007008, + 0.060759999999999995, + 0.23686600000000002, + 0.42401799999999995, + 0.56924, + 0.675736, + 0.743121, + 0.7683150000000001, + 0.384115, + 0.500422, + 0.216307, + 0.127622, + 0.021072, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008362999999999999, + 0.068333, + 0.24791, + 0.434361, + 0.574214, + 0.675961, + 0.73388, + 0.743891, + 0.7173959999999999, + 0.648884, + 0.5479400000000001, + 0.39755900000000005, + 0.19490000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009582, + 0.075207, + 0.245018, + 0.428952, + 0.566932, + 0.673443, + 0.722909, + 0.7235389999999999, + 0.688514, + 0.618173, + 0.5232100000000001, + 0.393945, + 0.199849, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010987, + 0.077632, + 0.247055, + 0.425339, + 0.555339, + 0.645597, + 0.6917300000000001, + 0.693322, + 0.670824, + 0.6175689999999999, + 0.5264, + 0.37917, + 0.180906, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011124, + 0.076916, + 0.24133500000000002, + 0.406096, + 0.5334260000000001, + 0.638155, + 0.702937, + 0.728707, + 0.713735, + 0.6507269999999999, + 0.542235, + 0.41551699999999997, + 0.21246, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010199999999999999, + 0.071923, + 0.250594, + 0.433479, + 0.564427, + 0.658019, + 0.7022160000000001, + 0.694528, + 0.664548, + 0.632403, + 0.544744, + 0.40227999999999997, + 0.20683500000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011541000000000001, + 0.075459, + 0.247842, + 0.421874, + 0.548938, + 0.637929, + 0.680757, + 0.680842, + 0.671099, + 0.631897, + 0.539858, + 0.395489, + 0.197857, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011327, + 0.075089, + 0.243618, + 0.41512299999999996, + 0.541903, + 0.633568, + 0.67945, + 0.6899740000000001, + 0.661938, + 0.6115130000000001, + 0.5177759999999999, + 0.381081, + 0.192801, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013127000000000002, + 0.079344, + 0.240184, + 0.397086, + 0.5170359999999999, + 0.615066, + 0.676865, + 0.7038329999999999, + 0.690875, + 0.637164, + 0.536697, + 0.394038, + 0.199292, + 0.0035800000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014047, + 0.08376, + 0.255289, + 0.410346, + 0.500488, + 0.607463, + 0.63166, + 0.751379, + 0.732155, + 0.5418390000000001, + 0.494436, + 0.35507799999999995, + 0.179551, + 0.006138, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019786, + 0.102306, + 0.237916, + 0.40626, + 0.570268, + 0.665319, + 0.731365, + 0.292868, + 0.352007, + 0.691772, + 0.58378, + 0.272906, + 0.20916300000000002, + 0.002751, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024143, + 0.10778, + 0.27499599999999996, + 0.260671, + 0.59166, + 0.69817, + 0.762856, + 0.7007749999999999, + 0.368781, + 0.082614, + 0.484321, + 0.285203, + 0.23549199999999998, + 0.010385, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016481000000000003, + 0.093929, + 0.27820999999999996, + 0.45742, + 0.44323700000000005, + 0.690562, + 0.7438619999999999, + 0.756904, + 0.521942, + 0.539702, + 0.5510729999999999, + 0.39960700000000005, + 0.201264, + 0.00276, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018973, + 0.096432, + 0.25876699999999997, + 0.42056299999999996, + 0.547327, + 0.643365, + 0.708109, + 0.733029, + 0.718683, + 0.6530750000000001, + 0.5467029999999999, + 0.389593, + 0.192363, + 0.003992, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025815, + 0.111303, + 0.27372199999999997, + 0.43757100000000004, + 0.567458, + 0.6736169999999999, + 0.738951, + 0.7623099999999999, + 0.7390119999999999, + 0.678806, + 0.569708, + 0.418007, + 0.216679, + 0.008805, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022265999999999998, + 0.103908, + 0.27071100000000003, + 0.43902300000000005, + 0.570332, + 0.672979, + 0.736139, + 0.7589020000000001, + 0.741832, + 0.682713, + 0.57955, + 0.432918, + 0.23413399999999998, + 0.013176, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018986999999999997, + 0.101205, + 0.276809, + 0.450677, + 0.5838139999999999, + 0.691758, + 0.755166, + 0.775891, + 0.7557809999999999, + 0.693239, + 0.5887939999999999, + 0.43738299999999997, + 0.23956200000000002, + 0.01927, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017577000000000002, + 0.105007, + 0.302017, + 0.48802, + 0.620165, + 0.712585, + 0.7693300000000001, + 0.7835420000000001, + 0.75666, + 0.698626, + 0.596723, + 0.448324, + 0.24732300000000002, + 0.020760999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022661, + 0.10790000000000001, + 0.290773, + 0.46540499999999996, + 0.598296, + 0.695956, + 0.7577229999999999, + 0.7807000000000001, + 0.761105, + 0.7009299999999999, + 0.59472, + 0.44329399999999997, + 0.240007, + 0.018438, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0287, + 0.117551, + 0.290358, + 0.466745, + 0.606452, + 0.708788, + 0.770829, + 0.703868, + 0.16819900000000002, + 0.522843, + 0.5927709999999999, + 0.430411, + 0.225615, + 0.016654, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026934999999999997, + 0.113488, + 0.283851, + 0.454931, + 0.5844790000000001, + 0.683399, + 0.746433, + 0.7690990000000001, + 0.756342, + 0.694108, + 0.46576799999999996, + 0.36274700000000004, + 0.19050399999999998, + 0.008753, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024439, + 0.110946, + 0.283688, + 0.460663, + 0.601607, + 0.7069, + 0.772223, + 0.797671, + 0.7741939999999999, + 0.713909, + 0.607242, + 0.456769, + 0.25583500000000003, + 0.026866, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018352, + 0.10641800000000001, + 0.289682, + 0.462703, + 0.583932, + 0.663233, + 0.708367, + 0.7208150000000001, + 0.7084750000000001, + 0.6531440000000001, + 0.55933, + 0.42529300000000003, + 0.24995799999999999, + 0.032115000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017977, + 0.107266, + 0.291983, + 0.46439600000000003, + 0.589369, + 0.678271, + 0.725429, + 0.7329220000000001, + 0.7026079999999999, + 0.632771, + 0.545216, + 0.42486599999999997, + 0.249414, + 0.0312, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018444, + 0.105907, + 0.283592, + 0.449849, + 0.573747, + 0.655654, + 0.6958179999999999, + 0.693932, + 0.6590130000000001, + 0.622479, + 0.5510929999999999, + 0.421918, + 0.241088, + 0.029032, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018143, + 0.104741, + 0.2742, + 0.430818, + 0.556437, + 0.6532380000000001, + 0.71568, + 0.7414740000000001, + 0.7272419999999999, + 0.6706019999999999, + 0.572936, + 0.432339, + 0.247908, + 0.033402, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016604, + 0.106171, + 0.28183600000000003, + 0.438428, + 0.553578, + 0.6378189999999999, + 0.684483, + 0.700995, + 0.682702, + 0.6355890000000001, + 0.5515019999999999, + 0.418341, + 0.240004, + 0.031952, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020035, + 0.106136, + 0.273043, + 0.429132, + 0.552528, + 0.650255, + 0.709544, + 0.7360789999999999, + 0.722247, + 0.667942, + 0.574136, + 0.439202, + 0.260093, + 0.041460000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017193999999999997, + 0.10890699999999999, + 0.23785900000000001, + 0.45643900000000004, + 0.5878490000000001, + 0.552057, + 0.7450739999999999, + 0.7629, + 0.744918, + 0.690023, + 0.5869, + 0.447963, + 0.261458, + 0.040402, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022498999999999998, + 0.115816, + 0.29797500000000005, + 0.46924400000000005, + 0.603955, + 0.703484, + 0.764891, + 0.786617, + 0.771122, + 0.711379, + 0.607611, + 0.464601, + 0.275726, + 0.04836, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028123000000000002, + 0.123501, + 0.29970800000000003, + 0.470598, + 0.6027279999999999, + 0.7076330000000001, + 0.76666, + 0.7877430000000001, + 0.767721, + 0.706054, + 0.604413, + 0.45808699999999997, + 0.264994, + 0.042752000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027248, + 0.12112300000000001, + 0.290312, + 0.44903899999999997, + 0.570484, + 0.6642250000000001, + 0.715553, + 0.7312240000000001, + 0.718703, + 0.66671, + 0.578017, + 0.444321, + 0.26372199999999996, + 0.048043999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021813, + 0.11536, + 0.286514, + 0.44385, + 0.564926, + 0.654557, + 0.702696, + 0.713756, + 0.697808, + 0.6476770000000001, + 0.558935, + 0.426491, + 0.24896000000000001, + 0.043184, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023876, + 0.117228, + 0.2809, + 0.435771, + 0.55838, + 0.654245, + 0.711702, + 0.732982, + 0.5685800000000001, + 0.661802, + 0.564053, + 0.377886, + 0.22984000000000002, + 0.043887999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030856, + 0.113405, + 0.286231, + 0.442067, + 0.56089, + 0.655251, + 0.715789, + 0.7361449999999999, + 0.721493, + 0.6684589999999999, + 0.57108, + 0.43758800000000003, + 0.255287, + 0.049633000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030506000000000002, + 0.11320999999999999, + 0.235033, + 0.263755, + 0.499905, + 0.5883079999999999, + 0.5220009999999999, + 0.376003, + 0.131547, + 0.45979899999999996, + 0.21551599999999999, + 0.437072, + 0.23768899999999998, + 0.038415, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026795000000000003, + 0.113307, + 0.276447, + 0.442728, + 0.557241, + 0.646495, + 0.712015, + 0.6742039999999999, + 0.522725, + 0.5689740000000001, + 0.5146499999999999, + 0.322584, + 0.173319, + 0.029735, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023443000000000002, + 0.107855, + 0.23125800000000002, + 0.226911, + 0.45463099999999995, + 0.5407029999999999, + 0.624268, + 0.633816, + 0.616127, + 0.321048, + 0.296631, + 0.23168799999999998, + 0.106489, + 0.040117, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025204, + 0.118897, + 0.27976999999999996, + 0.432092, + 0.5532549999999999, + 0.637605, + 0.671644, + 0.666211, + 0.643197, + 0.604291, + 0.5287580000000001, + 0.40252499999999997, + 0.247959, + 0.05579, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023254999999999998, + 0.11324899999999999, + 0.277941, + 0.429865, + 0.551655, + 0.64488, + 0.705271, + 0.73154, + 0.719127, + 0.665263, + 0.570797, + 0.44273700000000005, + 0.268404, + 0.067562, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021838, + 0.071717, + 0.177523, + 0.143792, + 0.17586000000000002, + 0.557357, + 0.49397199999999997, + 0.7419070000000001, + 0.738778, + 0.538323, + 0.5866910000000001, + 0.437742, + 0.252461, + 0.04081, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026221, + 0.11963700000000001, + 0.294253, + 0.461262, + 0.5949099999999999, + 0.693706, + 0.757426, + 0.781375, + 0.7660399999999999, + 0.7061799999999999, + 0.6063529999999999, + 0.46501, + 0.280331, + 0.070202, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022760000000000002, + 0.126524, + 0.316379, + 0.492243, + 0.631864, + 0.7338429999999999, + 0.797515, + 0.820432, + 0.7973, + 0.73687, + 0.6340779999999999, + 0.49812599999999996, + 0.312013, + 0.088574, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020328, + 0.12739, + 0.322504, + 0.501689, + 0.638345, + 0.737206, + 0.788099, + 0.765532, + 0.783501, + 0.722164, + 0.6211409999999999, + 0.484084, + 0.304117, + 0.08967900000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019729, + 0.122321, + 0.30370400000000003, + 0.4721, + 0.5920829999999999, + 0.6762910000000001, + 0.724828, + 0.732349, + 0.703933, + 0.6385839999999999, + 0.5527960000000001, + 0.442363, + 0.28272, + 0.080261, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021663, + 0.119475, + 0.29495, + 0.45687700000000003, + 0.576513, + 0.657643, + 0.701123, + 0.711989, + 0.6993400000000001, + 0.657166, + 0.5742, + 0.45184399999999997, + 0.283591, + 0.079872, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020527, + 0.115478, + 0.285558, + 0.44637099999999996, + 0.573044, + 0.671049, + 0.734321, + 0.761299, + 0.751305, + 0.697261, + 0.601767, + 0.47176, + 0.296206, + 0.08568, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020472999999999998, + 0.124572, + 0.296212, + 0.472877, + 0.582364, + 0.678596, + 0.764972, + 0.789022, + 0.771512, + 0.7151069999999999, + 0.61427, + 0.479417, + 0.299648, + 0.085967, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024687, + 0.12136, + 0.301965, + 0.468696, + 0.5971660000000001, + 0.694726, + 0.7556269999999999, + 0.7786369999999999, + 0.761349, + 0.702607, + 0.603241, + 0.471962, + 0.29457799999999995, + 0.08498900000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022407, + 0.12072799999999999, + 0.296974, + 0.456805, + 0.569076, + 0.642725, + 0.674236, + 0.6844210000000001, + 0.686556, + 0.655264, + 0.573735, + 0.453223, + 0.279491, + 0.077256, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023614, + 0.117695, + 0.28554, + 0.43492899999999995, + 0.55965, + 0.6539919999999999, + 0.7137, + 0.738636, + 0.725716, + 0.672999, + 0.57172, + 0.44798000000000004, + 0.259719, + 0.043851999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022133, + 0.115877, + 0.28944099999999995, + 0.454443, + 0.583087, + 0.680158, + 0.7414160000000001, + 0.766013, + 0.7514109999999999, + 0.695846, + 0.599429, + 0.47072, + 0.29483499999999996, + 0.085885, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025407, + 0.11935599999999999, + 0.291311, + 0.45235000000000003, + 0.5722079999999999, + 0.6537229999999999, + 0.696382, + 0.710543, + 0.7014130000000001, + 0.659865, + 0.5767680000000001, + 0.454972, + 0.28432799999999997, + 0.079844, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024519, + 0.117972, + 0.291056, + 0.45183999999999996, + 0.56763, + 0.642418, + 0.68577, + 0.7008920000000001, + 0.693901, + 0.654813, + 0.5705800000000001, + 0.45023, + 0.281963, + 0.081094, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.029788000000000002, + 0.121777, + 0.28363499999999997, + 0.435466, + 0.552704, + 0.641323, + 0.701265, + 0.726961, + 0.7151109999999999, + 0.657384, + 0.5726789999999999, + 0.45102, + 0.282087, + 0.082691, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024523, + 0.116976, + 0.28182, + 0.43735599999999997, + 0.555477, + 0.641386, + 0.69168, + 0.715237, + 0.7081109999999999, + 0.659534, + 0.572705, + 0.446113, + 0.281254, + 0.082826, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022940000000000002, + 0.11508700000000001, + 0.285766, + 0.44306599999999996, + 0.567154, + 0.6594840000000001, + 0.71947, + 0.743077, + 0.729413, + 0.676496, + 0.586216, + 0.458318, + 0.290292, + 0.08888, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02044, + 0.110866, + 0.281094, + 0.437761, + 0.556589, + 0.648581, + 0.7079310000000001, + 0.733694, + 0.722839, + 0.671808, + 0.582546, + 0.458365, + 0.292819, + 0.091329, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019577999999999998, + 0.110095, + 0.278515, + 0.43353800000000003, + 0.550698, + 0.62534, + 0.693852, + 0.725872, + 0.717067, + 0.6691090000000001, + 0.562429, + 0.43843099999999996, + 0.284891, + 0.075297, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022723, + 0.10645600000000001, + 0.249622, + 0.39348500000000003, + 0.54877, + 0.638486, + 0.6868150000000001, + 0.711221, + 0.6241680000000001, + 0.5955170000000001, + 0.49826600000000004, + 0.32910199999999995, + 0.253945, + 0.07558799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022997, + 0.108587, + 0.256053, + 0.40386900000000003, + 0.522837, + 0.655965, + 0.6938529999999999, + 0.700474, + 0.7195410000000001, + 0.687117, + 0.594563, + 0.470166, + 0.299768, + 0.092694, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022171, + 0.106766, + 0.26399900000000004, + 0.405601, + 0.5227480000000001, + 0.611095, + 0.668805, + 0.690987, + 0.677114, + 0.400401, + 0.252381, + 0.418798, + 0.265048, + 0.07791100000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021507000000000002, + 0.107459, + 0.266803, + 0.421036, + 0.540485, + 0.6332300000000001, + 0.6927089999999999, + 0.719789, + 0.708823, + 0.658941, + 0.5690879999999999, + 0.44608800000000004, + 0.281377, + 0.085132, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022733, + 0.112093, + 0.284578, + 0.449555, + 0.5823590000000001, + 0.684111, + 0.748093, + 0.772147, + 0.7571169999999999, + 0.701984, + 0.606506, + 0.47497, + 0.304211, + 0.097314, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024477, + 0.114376, + 0.291456, + 0.455034, + 0.570729, + 0.648205, + 0.70004, + 0.726244, + 0.722093, + 0.681428, + 0.595284, + 0.47201600000000005, + 0.301956, + 0.095821, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01893, + 0.106261, + 0.277709, + 0.433395, + 0.5460280000000001, + 0.637383, + 0.7014130000000001, + 0.73258, + 0.7260220000000001, + 0.679981, + 0.591039, + 0.474208, + 0.30998899999999996, + 0.10444400000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014618, + 0.104858, + 0.28674700000000003, + 0.45076499999999997, + 0.5696599999999999, + 0.64996, + 0.70726, + 0.733392, + 0.724572, + 0.681063, + 0.595767, + 0.473596, + 0.310603, + 0.102813, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014587999999999999, + 0.10501, + 0.287808, + 0.45514699999999997, + 0.579677, + 0.670501, + 0.7314919999999999, + 0.7567569999999999, + 0.746005, + 0.697448, + 0.6089450000000001, + 0.48315499999999995, + 0.316612, + 0.10758799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014326, + 0.104923, + 0.285225, + 0.446179, + 0.554953, + 0.630783, + 0.68143, + 0.704785, + 0.696697, + 0.655175, + 0.576638, + 0.45955399999999996, + 0.303581, + 0.10244299999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014199, + 0.10212900000000001, + 0.273415, + 0.42349200000000004, + 0.521716, + 0.6068680000000001, + 0.549079, + 0.693545, + 0.660103, + 0.616464, + 0.533, + 0.429118, + 0.266293, + 0.07458799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020997, + 0.100888, + 0.253633, + 0.402929, + 0.517123, + 0.604727, + 0.659985, + 0.682594, + 0.6037659999999999, + 0.638048, + 0.553135, + 0.42764800000000003, + 0.26276799999999995, + 0.071005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028897, + 0.113844, + 0.249609, + 0.39856400000000003, + 0.5141549999999999, + 0.6044400000000001, + 0.666029, + 0.607283, + 0.600102, + 0.635918, + 0.549432, + 0.423261, + 0.255003, + 0.063182, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020119, + 0.09899899999999999, + 0.260906, + 0.423226, + 0.5476219999999999, + 0.645141, + 0.7069249999999999, + 0.73234, + 0.726557, + 0.677039, + 0.585688, + 0.461669, + 0.295286, + 0.091782, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015269999999999999, + 0.09520300000000001, + 0.26600799999999997, + 0.434211, + 0.562392, + 0.659971, + 0.723285, + 0.750144, + 0.738059, + 0.6854690000000001, + 0.595653, + 0.474462, + 0.30478, + 0.096864, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017865, + 0.096731, + 0.260981, + 0.419622, + 0.5418390000000001, + 0.631182, + 0.69377, + 0.720213, + 0.713957, + 0.662571, + 0.56544, + 0.434851, + 0.26069400000000004, + 0.063982, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022208, + 0.080524, + 0.225825, + 0.19797599999999999, + 0.47744400000000004, + 0.51709, + 0.480547, + 0.5324439999999999, + 0.5181570000000001, + 0.30031599999999997, + 0.421907, + 0.33696699999999996, + 0.130136, + 0.025422999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022985, + 0.104113, + 0.263714, + 0.43166000000000004, + 0.566153, + 0.6727069999999999, + 0.7365470000000001, + 0.7591789999999999, + 0.749519, + 0.700761, + 0.6080420000000001, + 0.480852, + 0.30954899999999996, + 0.097959, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014365000000000001, + 0.092807, + 0.266898, + 0.434012, + 0.557763, + 0.651161, + 0.712433, + 0.737877, + 0.730308, + 0.6841860000000001, + 0.595716, + 0.47004399999999996, + 0.301123, + 0.09433799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012910999999999999, + 0.088561, + 0.26306599999999997, + 0.42767700000000003, + 0.546597, + 0.635273, + 0.6970839999999999, + 0.721092, + 0.712581, + 0.6653490000000001, + 0.577188, + 0.452934, + 0.28712, + 0.085229, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006144, + 0.072597, + 0.21785400000000002, + 0.32965300000000003, + 0.420774, + 0.311459, + 0.405716, + 0.415692, + 0.487978, + 0.604346, + 0.5269790000000001, + 0.429645, + 0.26350599999999996, + 0.068858, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008376, + 0.085655, + 0.240153, + 0.39503, + 0.513414, + 0.6101960000000001, + 0.670298, + 0.6962809999999999, + 0.6837709999999999, + 0.638852, + 0.5501119999999999, + 0.421825, + 0.258608, + 0.067899, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014358000000000001, + 0.082956, + 0.244317, + 0.407253, + 0.531556, + 0.627597, + 0.690182, + 0.7161259999999999, + 0.708193, + 0.66025, + 0.573718, + 0.449673, + 0.283038, + 0.08023000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012359, + 0.083342, + 0.254724, + 0.42151299999999997, + 0.545157, + 0.639306, + 0.701758, + 0.727296, + 0.715408, + 0.666913, + 0.579238, + 0.452719, + 0.284429, + 0.079108, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011787, + 0.08241, + 0.255719, + 0.42507, + 0.5530109999999999, + 0.649968, + 0.714746, + 0.7403010000000001, + 0.729478, + 0.677739, + 0.5853400000000001, + 0.458611, + 0.291087, + 0.084497, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011139, + 0.080046, + 0.251006, + 0.419069, + 0.546774, + 0.648371, + 0.7146979999999999, + 0.7427849999999999, + 0.734052, + 0.6857730000000001, + 0.59599, + 0.47040899999999997, + 0.30153399999999997, + 0.088377, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011013, + 0.07839600000000001, + 0.25191399999999997, + 0.419217, + 0.547359, + 0.647794, + 0.712291, + 0.739253, + 0.731583, + 0.678952, + 0.5866979999999999, + 0.463983, + 0.292891, + 0.08439100000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011839, + 0.079134, + 0.244514, + 0.413091, + 0.539215, + 0.636619, + 0.699025, + 0.722052, + 0.7150460000000001, + 0.663289, + 0.571649, + 0.443492, + 0.273619, + 0.06954300000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013233, + 0.076824, + 0.23408600000000002, + 0.391855, + 0.515046, + 0.609047, + 0.671285, + 0.694133, + 0.6833980000000001, + 0.632943, + 0.53928, + 0.417165, + 0.24212299999999998, + 0.008747, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002205, + 0.060087, + 0.066703, + 0.061622, + 0.527976, + 0.548909, + 0.654336, + 0.057665999999999995, + 0.182323, + 0.15757300000000002, + 0.020325, + 0.194739, + 0.037573999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012839, + 0.075033, + 0.22655099999999997, + 0.38497899999999996, + 0.506945, + 0.605019, + 0.668603, + 0.696049, + 0.6871470000000001, + 0.640715, + 0.5535549999999999, + 0.428981, + 0.259893, + 0.060357999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010396, + 0.069926, + 0.232794, + 0.399962, + 0.525154, + 0.623178, + 0.687566, + 0.714152, + 0.708483, + 0.6577430000000001, + 0.567776, + 0.431778, + 0.260916, + 0.058487000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010336, + 0.069288, + 0.232119, + 0.399707, + 0.52426, + 0.617101, + 0.6799679999999999, + 0.709234, + 0.700797, + 0.653409, + 0.56694, + 0.435607, + 0.264786, + 0.058756, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010948000000000001, + 0.069075, + 0.226404, + 0.388567, + 0.5140520000000001, + 0.6115309999999999, + 0.674446, + 0.700124, + 0.6941609999999999, + 0.644325, + 0.5539700000000001, + 0.423779, + 0.252897, + 0.051446, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011082000000000002, + 0.070036, + 0.228192, + 0.39149900000000004, + 0.517974, + 0.612448, + 0.673365, + 0.699509, + 0.6920850000000001, + 0.643783, + 0.5547430000000001, + 0.423311, + 0.25237, + 0.049784, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009726, + 0.06748399999999999, + 0.22647399999999998, + 0.394104, + 0.517725, + 0.609525, + 0.671552, + 0.6961219999999999, + 0.681842, + 0.635043, + 0.549022, + 0.42486599999999997, + 0.254637, + 0.048682, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009658, + 0.067162, + 0.225335, + 0.38910500000000003, + 0.513875, + 0.6088279999999999, + 0.6713899999999999, + 0.6976140000000001, + 0.692068, + 0.641728, + 0.551953, + 0.42200299999999996, + 0.249338, + 0.043825, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008955, + 0.066488, + 0.220694, + 0.38380000000000003, + 0.506253, + 0.600657, + 0.6613519999999999, + 0.68536, + 0.671268, + 0.6189199999999999, + 0.526573, + 0.404606, + 0.2324, + 0.034133000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.050389, + 0.008494, + 0.336312, + 0.511779, + 0.546467, + 0.59235, + 0.6204700000000001, + 0.67915, + 0.631475, + 0.538789, + 0.414354, + 0.240531, + 0.034908, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008967000000000001, + 0.06644, + 0.21757300000000002, + 0.380574, + 0.5051, + 0.6020449999999999, + 0.668685, + 0.696954, + 0.686457, + 0.6397569999999999, + 0.5485209999999999, + 0.42399000000000003, + 0.249579, + 0.038522, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0070940000000000005, + 0.059997, + 0.22059600000000001, + 0.388202, + 0.509516, + 0.603343, + 0.6612870000000001, + 0.688064, + 0.681895, + 0.634714, + 0.5456319999999999, + 0.416291, + 0.240926, + 0.03325, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007326, + 0.06472199999999999, + 0.21662700000000001, + 0.381856, + 0.5063070000000001, + 0.600094, + 0.663378, + 0.687422, + 0.536577, + 0.625291, + 0.531554, + 0.40182, + 0.223405, + 0.024625, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007567, + 0.07642700000000001, + 0.21968100000000002, + 0.38323, + 0.514033, + 0.617521, + 0.685303, + 0.716216, + 0.702542, + 0.6519980000000001, + 0.5560069999999999, + 0.42899400000000004, + 0.245564, + 0.030533, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007042, + 0.06167, + 0.229599, + 0.413868, + 0.5517329999999999, + 0.659461, + 0.7268450000000001, + 0.7516849999999999, + 0.7405109999999999, + 0.6842480000000001, + 0.583973, + 0.447127, + 0.25920499999999996, + 0.035338999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004764, + 0.055043, + 0.224062, + 0.404715, + 0.538655, + 0.63849, + 0.706203, + 0.734191, + 0.7212759999999999, + 0.667336, + 0.5711390000000001, + 0.438008, + 0.252701, + 0.030973, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0047599999999999995, + 0.054426999999999996, + 0.224475, + 0.402048, + 0.5325599999999999, + 0.627257, + 0.695392, + 0.726533, + 0.717384, + 0.666227, + 0.572203, + 0.442719, + 0.256584, + 0.033412, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004216, + 0.052094999999999995, + 0.220697, + 0.398346, + 0.531594, + 0.632377, + 0.700716, + 0.7318600000000001, + 0.719756, + 0.668351, + 0.571296, + 0.439572, + 0.252611, + 0.031008, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0036829999999999996, + 0.050256999999999996, + 0.21713, + 0.392427, + 0.525606, + 0.626377, + 0.694378, + 0.725244, + 0.7141810000000001, + 0.663138, + 0.568378, + 0.435198, + 0.24833000000000002, + 0.023727, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004335, + 0.050002000000000005, + 0.213032, + 0.393902, + 0.532775, + 0.6357619999999999, + 0.702981, + 0.728284, + 0.7184149999999999, + 0.663099, + 0.565469, + 0.43176299999999995, + 0.243642, + 0.022482, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003791, + 0.048428, + 0.204373, + 0.377019, + 0.5076080000000001, + 0.604583, + 0.6661889999999999, + 0.69101, + 0.680314, + 0.6247440000000001, + 0.531103, + 0.40528, + 0.225583, + 0.016439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003758, + 0.046801, + 0.20019800000000001, + 0.371987, + 0.49792899999999995, + 0.59409, + 0.658101, + 0.685132, + 0.6775829999999999, + 0.626972, + 0.534963, + 0.402933, + 0.22134600000000001, + 0.014374000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003262, + 0.045433, + 0.196762, + 0.36493000000000003, + 0.476262, + 0.49000900000000003, + 0.6547949999999999, + 0.6787859999999999, + 0.5678479999999999, + 0.46218400000000004, + 0.456867, + 0.35245800000000005, + 0.170882, + 0.006575999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0027879999999999997, + 0.054009999999999996, + 0.194489, + 0.36103500000000005, + 0.490622, + 0.584336, + 0.646562, + 0.672489, + 0.660828, + 0.6102759999999999, + 0.512532, + 0.36214100000000005, + 0.176904, + 0.001553, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002406, + 0.050725, + 0.192762, + 0.357108, + 0.483731, + 0.5708529999999999, + 0.631505, + 0.65661, + 0.644574, + 0.593099, + 0.49446300000000004, + 0.350029, + 0.168821, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003706, + 0.048502, + 0.189285, + 0.35517899999999997, + 0.484437, + 0.5843189999999999, + 0.6475700000000001, + 0.675353, + 0.665142, + 0.612852, + 0.515073, + 0.375712, + 0.18917799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0037029999999999997, + 0.042332, + 0.192302, + 0.363353, + 0.49793200000000004, + 0.599075, + 0.664736, + 0.6931430000000001, + 0.6805410000000001, + 0.626222, + 0.532006, + 0.395277, + 0.20530099999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004319, + 0.052997999999999997, + 0.19627699999999998, + 0.376267, + 0.46911, + 0.6151810000000001, + 0.6267619999999999, + 0.706585, + 0.694014, + 0.637019, + 0.538375, + 0.400648, + 0.20827099999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003241, + 0.038249000000000005, + 0.198876, + 0.377471, + 0.510808, + 0.6074510000000001, + 0.673135, + 0.701861, + 0.686087, + 0.631721, + 0.533034, + 0.39372199999999996, + 0.20063399999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002592, + 0.036761, + 0.19174000000000002, + 0.369363, + 0.502275, + 0.597449, + 0.65742, + 0.681772, + 0.668782, + 0.613255, + 0.5174160000000001, + 0.376277, + 0.180744, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002052, + 0.035203000000000005, + 0.188702, + 0.36727699999999996, + 0.5019669999999999, + 0.601668, + 0.664197, + 0.685483, + 0.674395, + 0.615738, + 0.514505, + 0.375868, + 0.182801, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0021469999999999996, + 0.038194000000000006, + 0.193586, + 0.37768999999999997, + 0.518423, + 0.6197229999999999, + 0.686964, + 0.71156, + 0.6956760000000001, + 0.637334, + 0.536736, + 0.394197, + 0.194174, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0015609999999999999, + 0.034594, + 0.185645, + 0.362445, + 0.497731, + 0.597782, + 0.6618120000000001, + 0.6865119999999999, + 0.676207, + 0.618615, + 0.5189400000000001, + 0.37817500000000004, + 0.18138200000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.000907, + 0.036285, + 0.175542, + 0.345342, + 0.483011, + 0.583451, + 0.648404, + 0.6755890000000001, + 0.573597, + 0.518734, + 0.421162, + 0.345314, + 0.15546000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04517, + 0.17676499999999998, + 0.32343099999999997, + 0.437333, + 0.568831, + 0.558592, + 0.547962, + 0.560021, + 0.164274, + 0.10155299999999999, + 0.291916, + 0.139462, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035252000000000006, + 0.170131, + 0.33770999999999995, + 0.47226799999999997, + 0.573342, + 0.637828, + 0.662858, + 0.651032, + 0.596071, + 0.493921, + 0.354643, + 0.15862700000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028522, + 0.17037799999999997, + 0.337829, + 0.463931, + 0.560914, + 0.624885, + 0.6509790000000001, + 0.639492, + 0.584874, + 0.48953199999999997, + 0.349303, + 0.15633699999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027691, + 0.16730799999999998, + 0.330109, + 0.452658, + 0.54118, + 0.5947279999999999, + 0.616545, + 0.607677, + 0.397238, + 0.269435, + 0.295717, + 0.136834, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040216999999999996, + 0.16489099999999998, + 0.32980200000000004, + 0.46308699999999997, + 0.5653360000000001, + 0.6303909999999999, + 0.655085, + 0.320444, + 0.033862, + 0.474746, + 0.062027, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034892000000000006, + 0.161831, + 0.31729599999999997, + 0.44262999999999997, + 0.541862, + 0.599178, + 0.622563, + 0.611761, + 0.489734, + 0.39599900000000005, + 0.347311, + 0.143767, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026693, + 0.169374, + 0.34151299999999996, + 0.476358, + 0.574286, + 0.639289, + 0.6667029999999999, + 0.652805, + 0.595031, + 0.491558, + 0.344903, + 0.140491, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026033, + 0.168294, + 0.337534, + 0.45926999999999996, + 0.556965, + 0.618957, + 0.18812, + 0.02104, + 0.016468, + 0.480293, + 0.335435, + 0.133781, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02579, + 0.16270199999999999, + 0.332988, + 0.47118400000000005, + 0.568487, + 0.629327, + 0.6509020000000001, + 0.245273, + 0.206608, + 0.049485, + 0.209151, + 0.12247, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031414000000000004, + 0.15953299999999998, + 0.33054300000000003, + 0.464935, + 0.560757, + 0.6183930000000001, + 0.638304, + 0.620093, + 0.558686, + 0.457343, + 0.30601, + 0.106708, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026607, + 0.156634, + 0.323895, + 0.456745, + 0.550177, + 0.605601, + 0.624024, + 0.604309, + 0.5461520000000001, + 0.16786500000000001, + 0.302014, + 0.02018, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026334, + 0.154117, + 0.32475, + 0.4595, + 0.55892, + 0.6207910000000001, + 0.645293, + 0.629435, + 0.568341, + 0.46151400000000004, + 0.310092, + 0.104004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027600000000000003, + 0.155311, + 0.325521, + 0.46307, + 0.5626530000000001, + 0.6249410000000001, + 0.6499969999999999, + 0.633167, + 0.567286, + 0.453003, + 0.297554, + 0.09295300000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024682, + 0.164114, + 0.348082, + 0.495145, + 0.598496, + 0.661555, + 0.683888, + 0.6691950000000001, + 0.6033740000000001, + 0.492473, + 0.325659, + 0.108192, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026834, + 0.166578, + 0.35272899999999996, + 0.501888, + 0.6054360000000001, + 0.670665, + 0.689557, + 0.668762, + 0.6023740000000001, + 0.49011, + 0.328067, + 0.108168, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02573, + 0.15929300000000002, + 0.334464, + 0.477094, + 0.582044, + 0.647531, + 0.670793, + 0.651664, + 0.589489, + 0.482098, + 0.322257, + 0.105977, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020762, + 0.152944, + 0.331853, + 0.470142, + 0.567444, + 0.62151, + 0.631593, + 0.6006739999999999, + 0.5345059999999999, + 0.437367, + 0.29520100000000005, + 0.09419799999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023177, + 0.148685, + 0.320337, + 0.45677100000000004, + 0.550944, + 0.603688, + 0.61462, + 0.58198, + 0.5214059999999999, + 0.425195, + 0.280435, + 0.07986499999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028735, + 0.145049, + 0.316523, + 0.4555, + 0.552803, + 0.614398, + 0.636577, + 0.614232, + 0.5455760000000001, + 0.42998200000000003, + 0.24566300000000002, + 0.049561999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041433, + 0.160016, + 0.32043, + 0.45470499999999997, + 0.561686, + 0.6248630000000001, + 0.642989, + 0.624125, + 0.547856, + 0.41922699999999996, + 0.27246, + 0.060986, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028337, + 0.15812600000000002, + 0.350606, + 0.510111, + 0.624958, + 0.6937000000000001, + 0.7137279999999999, + 0.690329, + 0.614171, + 0.491234, + 0.316239, + 0.084751, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019629, + 0.15628299999999998, + 0.356049, + 0.517777, + 0.628539, + 0.696067, + 0.7155739999999999, + 0.686437, + 0.612634, + 0.49401999999999996, + 0.316144, + 0.078977, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019627, + 0.15236000000000002, + 0.34830700000000003, + 0.502654, + 0.610303, + 0.673176, + 0.687809, + 0.660211, + 0.5882179999999999, + 0.47154700000000005, + 0.30415699999999996, + 0.07146, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018670000000000003, + 0.145079, + 0.330868, + 0.47529899999999997, + 0.571699, + 0.627418, + 0.641167, + 0.612177, + 0.55034, + 0.445312, + 0.283765, + 0.055082, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025106000000000003, + 0.143262, + 0.32313400000000003, + 0.473189, + 0.583905, + 0.649033, + 0.671961, + 0.647969, + 0.579321, + 0.45743, + 0.282055, + 0.045747, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019072, + 0.142363, + 0.334135, + 0.483382, + 0.582794, + 0.638775, + 0.650051, + 0.618949, + 0.5502659999999999, + 0.43764600000000003, + 0.275989, + 0.04523, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016972, + 0.135246, + 0.318172, + 0.467005, + 0.569397, + 0.632992, + 0.652594, + 0.624049, + 0.551647, + 0.431859, + 0.258183, + 0.034454, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03392, + 0.143803, + 0.308653, + 0.45469400000000004, + 0.577493, + 0.646537, + 0.6692380000000001, + 0.643913, + 0.573372, + 0.45510700000000004, + 0.27647000000000005, + 0.038785, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016808, + 0.13670500000000002, + 0.333642, + 0.493114, + 0.6011040000000001, + 0.6654650000000001, + 0.682093, + 0.653157, + 0.577509, + 0.45358800000000005, + 0.27064, + 0.034713, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016625, + 0.133047, + 0.32539100000000004, + 0.4801, + 0.582109, + 0.641714, + 0.653683, + 0.622869, + 0.54818, + 0.430955, + 0.257235, + 0.030501999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017327000000000002, + 0.129498, + 0.31838, + 0.469942, + 0.572837, + 0.630892, + 0.6420950000000001, + 0.610179, + 0.539514, + 0.424291, + 0.250843, + 0.024068000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018748, + 0.123722, + 0.298673, + 0.446699, + 0.549755, + 0.612206, + 0.632017, + 0.611423, + 0.542318, + 0.424784, + 0.246139, + 0.019591, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016309, + 0.122647, + 0.306, + 0.453239, + 0.551635, + 0.609603, + 0.623991, + 0.5995309999999999, + 0.532038, + 0.41683, + 0.240323, + 0.017745999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021582, + 0.115642, + 0.263413, + 0.454755, + 0.491541, + 0.49435700000000005, + 0.530594, + 0.39805, + 0.2035, + 0.416812, + 0.237353, + 0.012351, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020507, + 0.120211, + 0.290563, + 0.43057999999999996, + 0.491247, + 0.541956, + 0.5486409999999999, + 0.49662599999999996, + 0.38991899999999996, + 0.278353, + 0.09794, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019234, + 0.117404, + 0.291497, + 0.39809500000000003, + 0.49853800000000004, + 0.503397, + 0.344077, + 0.419796, + 0.26274400000000003, + 0.27703, + 0.048600000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014146, + 0.108515, + 0.279557, + 0.425545, + 0.525098, + 0.586424, + 0.607817, + 0.582203, + 0.510394, + 0.39167399999999997, + 0.21320699999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026803, + 0.109038, + 0.27809100000000003, + 0.42567, + 0.5247050000000001, + 0.585491, + 0.6059640000000001, + 0.580659, + 0.508039, + 0.38935899999999996, + 0.210395, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015934, + 0.10765000000000001, + 0.28364, + 0.43655700000000003, + 0.5409149999999999, + 0.601958, + 0.622989, + 0.5934619999999999, + 0.516301, + 0.38929199999999997, + 0.20306, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021373999999999997, + 0.113966, + 0.294193, + 0.452386, + 0.5606789999999999, + 0.623184, + 0.640541, + 0.610893, + 0.399771, + 0.275714, + 0.012269, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021675999999999997, + 0.054216, + 0.188391, + 0.457881, + 0.320547, + 0.628421, + 0.645186, + 0.146784, + 0.210635, + 0.409476, + 0.003243, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016558, + 0.110849, + 0.30462900000000004, + 0.46896899999999997, + 0.574121, + 0.636926, + 0.10100100000000001, + 0.22568000000000002, + 0.013538999999999999, + 0.020867, + 0.105484, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014417999999999999, + 0.108964, + 0.296205, + 0.45997899999999997, + 0.562276, + 0.620347, + 0.630869, + 0.595223, + 0.517557, + 0.385719, + 0.191909, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015006, + 0.103364, + 0.285589, + 0.444543, + 0.546606, + 0.601958, + 0.613777, + 0.5816330000000001, + 0.506781, + 0.38399700000000003, + 0.19004400000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013465999999999999, + 0.099857, + 0.28169, + 0.436247, + 0.527183, + 0.5742430000000001, + 0.5840270000000001, + 0.5545739999999999, + 0.484151, + 0.368274, + 0.183171, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014198, + 0.096846, + 0.271457, + 0.428192, + 0.45867399999999997, + 0.500135, + 0.596468, + 0.5606749999999999, + 0.480524, + 0.35158999999999996, + 0.165744, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012844, + 0.093041, + 0.268944, + 0.426606, + 0.522905, + 0.5766939999999999, + 0.5883339999999999, + 0.555363, + 0.48060899999999995, + 0.355602, + 0.164939, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012572, + 0.088457, + 0.267779, + 0.425342, + 0.524646, + 0.582369, + 0.5960080000000001, + 0.5633980000000001, + 0.484224, + 0.356865, + 0.167806, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012602, + 0.088533, + 0.265461, + 0.417996, + 0.510648, + 0.55791, + 0.560605, + 0.526474, + 0.460067, + 0.343534, + 0.160415, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011151, + 0.085096, + 0.25358, + 0.35207900000000003, + 0.448166, + 0.544276, + 0.498214, + 0.435467, + 0.463183, + 0.293525, + 0.142041, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014341, + 0.09349500000000001, + 0.249924, + 0.395438, + 0.492132, + 0.5464600000000001, + 0.5587519999999999, + 0.539678, + 0.462428, + 0.330882, + 0.131966, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011526, + 0.08245699999999999, + 0.24977000000000002, + 0.403973, + 0.506021, + 0.56638, + 0.5811839999999999, + 0.550513, + 0.472715, + 0.33954500000000004, + 0.14180600000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01084, + 0.07956300000000001, + 0.254581, + 0.41196, + 0.514171, + 0.569572, + 0.577404, + 0.539989, + 0.461469, + 0.329453, + 0.137042, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010066, + 0.078899, + 0.254035, + 0.414891, + 0.517042, + 0.571585, + 0.578798, + 0.539216, + 0.46134800000000004, + 0.330572, + 0.134604, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01093, + 0.078538, + 0.249608, + 0.401886, + 0.5041789999999999, + 0.564115, + 0.580937, + 0.547063, + 0.467524, + 0.331009, + 0.12099800000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011654999999999999, + 0.079303, + 0.248606, + 0.402495, + 0.503517, + 0.556442, + 0.563722, + 0.531046, + 0.45588, + 0.32256599999999996, + 0.11188, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010865, + 0.076034, + 0.244171, + 0.396067, + 0.493348, + 0.5422, + 0.547591, + 0.513729, + 0.438987, + 0.30879399999999996, + 0.109361, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00977, + 0.070588, + 0.239925, + 0.397959, + 0.501992, + 0.559274, + 0.570064, + 0.5356420000000001, + 0.454618, + 0.315698, + 0.11948600000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0074470000000000005, + 0.06843300000000001, + 0.23627199999999998, + 0.392712, + 0.494585, + 0.548917, + 0.55651, + 0.52218, + 0.442584, + 0.307125, + 0.10916500000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008605999999999999, + 0.07181399999999999, + 0.22759700000000002, + 0.376847, + 0.480923, + 0.536458, + 0.544621, + 0.462384, + 0.255008, + 0.18303, + 0.052302999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008112, + 0.074227, + 0.228525, + 0.379503, + 0.48598899999999995, + 0.540726, + 0.548909, + 0.5126369999999999, + 0.418508, + 0.270399, + 0.077764, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007749, + 0.072157, + 0.23093, + 0.393192, + 0.507895, + 0.574299, + 0.592947, + 0.559925, + 0.476735, + 0.324141, + 0.110494, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006375, + 0.063473, + 0.23783, + 0.40561, + 0.5158959999999999, + 0.572276, + 0.5803809999999999, + 0.5455270000000001, + 0.46213600000000005, + 0.317813, + 0.108598, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005873000000000001, + 0.062871, + 0.234459, + 0.40124200000000004, + 0.510193, + 0.565258, + 0.572484, + 0.530956, + 0.44592200000000004, + 0.301738, + 0.09847199999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005915, + 0.059368000000000004, + 0.225094, + 0.385496, + 0.49349, + 0.548102, + 0.557685, + 0.5205890000000001, + 0.437167, + 0.29258, + 0.090475, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004703000000000001, + 0.055111, + 0.218488, + 0.37741199999999997, + 0.47995, + 0.532036, + 0.538789, + 0.363999, + 0.38389100000000004, + 0.227379, + 0.083725, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004203999999999999, + 0.052469999999999996, + 0.21352600000000002, + 0.29968900000000004, + 0.463871, + 0.519541, + 0.532817, + 0.502014, + 0.425288, + 0.282097, + 0.030282, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003858, + 0.051325, + 0.212505, + 0.376122, + 0.438087, + 0.368165, + 0.29334, + 0.5191749999999999, + 0.324235, + 0.257587, + 0.059719, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0062439999999999996, + 0.052503999999999995, + 0.20984999999999998, + 0.367564, + 0.480248, + 0.534892, + 0.544263, + 0.513831, + 0.432278, + 0.285289, + 0.075557, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004954, + 0.046594000000000003, + 0.214917, + 0.384074, + 0.50219, + 0.563211, + 0.572528, + 0.5340280000000001, + 0.44286000000000003, + 0.28978, + 0.071302, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00491, + 0.044882, + 0.206732, + 0.370012, + 0.483969, + 0.542529, + 0.552166, + 0.5142559999999999, + 0.427908, + 0.273356, + 0.061175, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00357, + 0.041860999999999995, + 0.193623, + 0.354693, + 0.467247, + 0.5265449999999999, + 0.536374, + 0.5005269999999999, + 0.414008, + 0.26695800000000003, + 0.056743, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0034980000000000002, + 0.041569, + 0.19050899999999998, + 0.348361, + 0.456297, + 0.509165, + 0.517521, + 0.48199200000000003, + 0.402836, + 0.262621, + 0.054134999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0022679999999999996, + 0.038299999999999994, + 0.18518, + 0.34039299999999995, + 0.44513600000000003, + 0.5011059999999999, + 0.5129130000000001, + 0.480226, + 0.399575, + 0.256271, + 0.05111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004099, + 0.038267, + 0.1827, + 0.338233, + 0.445761, + 0.499092, + 0.505823, + 0.4704, + 0.387678, + 0.243505, + 0.043196, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.001676, + 0.036893999999999996, + 0.178303, + 0.325515, + 0.428697, + 0.488695, + 0.396478, + 0.473273, + 0.39199599999999996, + 0.24518500000000001, + 0.043558, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034561999999999996, + 0.179637, + 0.339231, + 0.45571100000000003, + 0.514064, + 0.5262619999999999, + 0.489147, + 0.402827, + 0.249267, + 0.040644, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.049726, + 0.178716, + 0.325857, + 0.442704, + 0.500263, + 0.511724, + 0.354949, + 0.375467, + 0.222405, + 0.003354, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.047223, + 0.148445, + 0.323146, + 0.439634, + 0.498572, + 0.510965, + 0.477673, + 0.392849, + 0.243228, + 0.03993, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.049329, + 0.147431, + 0.317873, + 0.431045, + 0.420798, + 0.393041, + 0.33304300000000003, + 0.289225, + 0.16048300000000001, + 0.003283, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024513, + 0.166, + 0.246484, + 0.439305, + 0.501231, + 0.5159980000000001, + 0.482465, + 0.39541899999999996, + 0.240694, + 0.014435, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034071, + 0.163575, + 0.319574, + 0.435334, + 0.49550900000000003, + 0.508188, + 0.47224700000000003, + 0.384277, + 0.23274799999999998, + 0.030787, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028053, + 0.170239, + 0.342827, + 0.468118, + 0.530691, + 0.5413479999999999, + 0.5046809999999999, + 0.41410399999999997, + 0.252604, + 0.036179, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027036, + 0.160808, + 0.32417399999999996, + 0.445446, + 0.5066700000000001, + 0.518914, + 0.480599, + 0.392736, + 0.198436, + 0.008966, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04329, + 0.137412, + 0.318168, + 0.356483, + 0.422142, + 0.29512700000000003, + 0.22827799999999998, + 0.10830500000000001, + 0.19349100000000002, + 0.007622, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024626000000000002, + 0.127847, + 0.300428, + 0.32883999999999997, + 0.369216, + 0.174101, + 0.465995, + 0.377093, + 0.223878, + 0.021969000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023608, + 0.14851699999999998, + 0.304599, + 0.423184, + 0.41639, + 0.375704, + 0.341638, + 0.175588, + 0.069423, + 0.001113, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021927, + 0.145751, + 0.303068, + 0.420722, + 0.48135700000000003, + 0.49212700000000004, + 0.45594799999999996, + 0.368293, + 0.218803, + 0.0224, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038405, + 0.128071, + 0.240071, + 0.406428, + 0.472225, + 0.486372, + 0.454152, + 0.36651100000000003, + 0.152801, + 0.007687, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019294000000000002, + 0.1426, + 0.30772000000000005, + 0.433716, + 0.501486, + 0.515053, + 0.478765, + 0.38622, + 0.231026, + 0.008407, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0358, + 0.13858199999999998, + 0.30002, + 0.42083, + 0.488451, + 0.504079, + 0.471794, + 0.38372300000000004, + 0.230656, + 0.024569, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03504, + 0.136912, + 0.29262299999999997, + 0.40756099999999995, + 0.47457, + 0.490066, + 0.456538, + 0.366999, + 0.219945, + 0.022914999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031671, + 0.129879, + 0.28530399999999995, + 0.400046, + 0.457351, + 0.46839400000000003, + 0.441003, + 0.357495, + 0.217243, + 0.024175000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031918, + 0.11557200000000001, + 0.225499, + 0.337966, + 0.366031, + 0.36238600000000004, + 0.420497, + 0.34575599999999995, + 0.206517, + 0.018195, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031004, + 0.11271099999999999, + 0.27783800000000003, + 0.398197, + 0.468519, + 0.485074, + 0.456695, + 0.36794499999999997, + 0.221658, + 0.023382, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018123, + 0.123852, + 0.277043, + 0.39824, + 0.468375, + 0.48373700000000003, + 0.452926, + 0.362011, + 0.100378, + 0.001062, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015433, + 0.1003, + 0.169103, + 0.012362, + 0.069453, + 0.02618, + 0.032836, + 0.089752, + 0.057529000000000004, + 0.018931, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019308, + 0.11791800000000001, + 0.23688800000000002, + 0.33281099999999997, + 0.35771600000000003, + 0.388589, + 0.294707, + 0.133349, + 0.020681, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02978, + 0.081661, + 0.081497, + 0.127044, + 0.30551100000000003, + 0.30452100000000004, + 0.349049, + 0.27181900000000003, + 0.19911199999999998, + 0.008417999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019417, + 0.00507, + 0.269522, + 0.25605500000000003, + 0.31869, + 0.355527, + 0.192547, + 0.005702, + 0.212474, + 0.00495, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016727, + 0.115767, + 0.276733, + 0.407408, + 0.483899, + 0.501855, + 0.470854, + 0.377678, + 0.219218, + 0.00566, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016395, + 0.110535, + 0.264308, + 0.388204, + 0.461442, + 0.396701, + 0.44893299999999997, + 0.258955, + 0.16026300000000002, + 0.015656, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015242, + 0.107361, + 0.265229, + 0.38938, + 0.463727, + 0.480802, + 0.326678, + 0.35862700000000003, + 0.210562, + 0.01691, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014320000000000001, + 0.10586799999999999, + 0.26651400000000003, + 0.39705, + 0.474051, + 0.49103600000000003, + 0.460149, + 0.368087, + 0.214315, + 0.017287, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017095, + 0.10795199999999999, + 0.269247, + 0.363124, + 0.415662, + 0.487822, + 0.37482, + 0.365502, + 0.21853999999999998, + 0.019392, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016571000000000002, + 0.103965, + 0.25855700000000004, + 0.388065, + 0.467049, + 0.491435, + 0.202034, + 0.139657, + 0.212981, + 0.016862, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017519, + 0.104399, + 0.223208, + 0.26349, + 0.461322, + 0.027924, + 0.18437, + 0.075902, + 0.114093, + 0.01255, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014461, + 0.100655, + 0.261627, + 0.392564, + 0.474194, + 0.494601, + 0.46223000000000003, + 0.370999, + 0.22018100000000002, + 0.020017, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012962, + 0.096459, + 0.258548, + 0.391909, + 0.47139299999999995, + 0.490476, + 0.460296, + 0.369682, + 0.219828, + 0.02145, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014534, + 0.09214499999999999, + 0.249162, + 0.373382, + 0.443996, + 0.46560700000000005, + 0.43911, + 0.35534, + 0.212071, + 0.019731000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015982, + 0.093087, + 0.247673, + 0.30356299999999997, + 0.344598, + 0.34093900000000005, + 0.077362, + 0.274238, + 0.21615, + 0.006972000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013977999999999999, + 0.092719, + 0.25410499999999997, + 0.39049700000000004, + 0.47460199999999997, + 0.498553, + 0.47124099999999997, + 0.381393, + 0.229847, + 0.027805, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012282, + 0.090195, + 0.249362, + 0.379623, + 0.457867, + 0.478224, + 0.45105700000000004, + 0.366059, + 0.22231499999999998, + 0.008119999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015318, + 0.067986, + 0.239786, + 0.313183, + 0.36279199999999995, + 0.472178, + 0.40834899999999996, + 0.36400099999999996, + 0.219602, + 0.026751, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01312, + 0.089171, + 0.24725999999999998, + 0.377116, + 0.455316, + 0.476594, + 0.448678, + 0.365416, + 0.223308, + 0.026364000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01299, + 0.08673099999999999, + 0.240145, + 0.36300099999999996, + 0.43370299999999995, + 0.45855399999999996, + 0.43380599999999997, + 0.352288, + 0.21258600000000002, + 0.021421, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017677, + 0.085305, + 0.17767, + 0.32278500000000004, + 0.446299, + 0.38473, + 0.459871, + 0.37632600000000005, + 0.228691, + 0.022157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013106, + 0.084346, + 0.237018, + 0.36603600000000003, + 0.3561, + 0.473454, + 0.447892, + 0.36342599999999997, + 0.21998900000000002, + 0.027123, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012423, + 0.08306699999999999, + 0.236769, + 0.365106, + 0.444654, + 0.46827199999999997, + 0.279446, + 0.304064, + 0.092012, + 0.003676, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010861, + 0.08023999999999999, + 0.23147399999999999, + 0.363142, + 0.444095, + 0.468506, + 0.445505, + 0.325445, + 0.22001300000000001, + 0.012516, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010676999999999999, + 0.08087699999999999, + 0.244512, + 0.38294799999999996, + 0.466282, + 0.402357, + 0.327062, + 0.266517, + 0.11505800000000001, + 0.006304000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010734, + 0.079748, + 0.241654, + 0.37618, + 0.38869600000000004, + 0.432772, + 0.461676, + 0.38021499999999997, + 0.240602, + 0.040451999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009797, + 0.07568899999999999, + 0.230685, + 0.301072, + 0.360999, + 0.358965, + 0.315016, + 0.241184, + 0.116732, + 0.006809999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015914, + 0.075569, + 0.127181, + 0.229742, + 0.335644, + 0.389944, + 0.296982, + 0.174226, + 0.226387, + 0.016794, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008386, + 0.077758, + 0.19381299999999999, + 0.230327, + 0.145797, + 0.137462, + 0.04218, + 0.09569799999999999, + 0.077393, + 0.004096, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01494, + 0.007328, + 0.126896, + 0.080486, + 0.118131, + 0.048034999999999994, + 0.10512, + 0.280267, + 0.057217, + 0.034523000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012052, + 0.04059599999999999, + 0.14897, + 0.051662, + 0.141411, + 0.144173, + 0.124481, + 0.089459, + 0.077465, + 0.005256, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011965, + 0.07634300000000001, + 0.225717, + 0.361714, + 0.446392, + 0.373714, + 0.336951, + 0.37846199999999997, + 0.176695, + 0.054952, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "annual_energy_produced_kwh_bau": 45938.58, + "electric_to_load_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.393, + 2.139, + 6.711, + 10.65, + 13.116, + 13.94, + 13.336, + 11.106, + 7.211, + 1.56, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.389, + 2.138, + 6.783, + 10.767, + 13.284, + 14.135, + 13.449, + 11.252, + 7.357, + 0.248, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.388, + 2.256, + 6.862, + 11.003, + 13.68, + 14.574, + 13.999, + 11.734, + 7.738, + 1.735, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.28, + 2.201, + 6.947, + 11.0, + 13.516, + 14.351, + 13.743, + 11.52, + 7.619, + 1.719, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.384, + 2.152, + 6.757, + 10.682, + 13.15, + 13.963, + 11.042, + 7.914, + 7.479, + 0.926, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.349, + 2.145, + 6.675, + 8.171, + 9.19, + 11.085, + 13.264, + 11.208, + 7.503, + 1.818, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.252, + 2.079, + 6.57, + 10.44, + 12.913, + 13.78, + 13.292, + 11.197, + 7.442, + 1.884, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.255, + 2.174, + 6.895, + 11.102, + 13.818, + 14.726, + 14.17, + 12.047, + 8.063, + 2.193, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.388, + 2.277, + 6.795, + 10.789, + 13.371, + 14.24, + 13.733, + 11.668, + 7.912, + 2.297, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.354, + 2.106, + 6.741, + 9.333, + 10.322, + 12.222, + 9.539, + 8.85, + 5.166, + 0.881, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.152, + 0.888, + 3.869, + 10.244, + 12.813, + 11.247, + 10.752, + 11.368, + 7.01, + 2.344, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.327, + 2.193, + 6.802, + 10.79, + 13.356, + 14.223, + 13.649, + 11.635, + 7.953, + 2.559, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.301, + 2.182, + 6.756, + 10.633, + 13.149, + 14.054, + 13.614, + 11.689, + 8.003, + 2.56, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.275, + 2.193, + 6.93, + 10.976, + 11.546, + 11.029, + 10.368, + 10.168, + 6.617, + 2.894, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.395, + 2.188, + 6.53, + 8.555, + 10.898, + 8.016, + 13.363, + 5.576, + 0.874, + 0.574, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.303, + 2.268, + 6.719, + 10.762, + 13.353, + 14.312, + 13.895, + 11.942, + 8.226, + 2.891, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.285, + 2.199, + 6.661, + 10.517, + 13.037, + 11.542, + 13.602, + 11.782, + 8.152, + 2.981, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.377, + 2.315, + 5.366, + 9.195, + 11.202, + 11.629, + 8.707, + 7.932, + 3.933, + 0.606, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.417, + 1.318, + 4.194, + 6.647, + 6.872, + 14.206, + 13.834, + 7.7, + 5.937, + 0.603, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.366, + 2.396, + 6.983, + 11.045, + 13.665, + 7.462, + 1.81, + 2.555, + 0.27, + 0.388, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.488, + 2.523, + 6.167, + 9.515, + 11.238, + 12.132, + 10.105, + 8.0, + 7.165, + 3.518, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.326, + 2.432, + 7.138, + 11.09, + 13.686, + 14.685, + 14.239, + 12.407, + 8.879, + 3.554, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.342, + 2.429, + 7.005, + 8.753, + 11.325, + 11.047, + 10.582, + 9.727, + 6.237, + 1.297, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.519, + 2.526, + 4.133, + 6.252, + 6.659, + 7.151, + 6.172, + 2.509, + 1.343, + 0.531, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.625, + 3.865, + 3.047, + 4.929, + 0.164, + 15.006, + 13.092, + 9.328, + 3.833, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.546, + 2.763, + 6.495, + 0.785, + 11.368, + 11.842, + 10.208, + 0.395, + 8.907, + 3.315, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.491, + 3.036, + 8.122, + 12.549, + 15.281, + 16.302, + 15.9, + 14.03, + 10.212, + 4.517, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.348, + 2.87, + 8.053, + 12.375, + 15.041, + 16.095, + 15.668, + 13.739, + 10.072, + 4.562, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.363, + 2.859, + 7.956, + 12.078, + 14.518, + 15.421, + 11.934, + 11.35, + 6.11, + 1.821, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.634, + 2.917, + 7.797, + 10.204, + 12.198, + 12.846, + 12.08, + 10.559, + 7.564, + 2.484, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.772, + 5.337, + 8.618, + 15.08, + 16.231, + 15.865, + 13.965, + 10.328, + 4.097, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.702, + 3.282, + 7.869, + 11.784, + 14.177, + 15.271, + 15.02, + 13.395, + 9.964, + 4.439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.499, + 3.22, + 8.464, + 10.853, + 12.737, + 12.899, + 15.745, + 13.852, + 10.452, + 5.204, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.421, + 3.254, + 8.399, + 12.582, + 15.069, + 16.047, + 15.608, + 13.851, + 10.495, + 5.314, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.453, + 3.165, + 8.231, + 12.374, + 14.82, + 15.827, + 15.394, + 13.638, + 10.324, + 5.189, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.783, + 3.059, + 6.362, + 10.291, + 12.238, + 12.175, + 10.885, + 10.462, + 6.664, + 2.291, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.481, + 3.317, + 8.217, + 12.263, + 14.739, + 15.856, + 13.287, + 11.428, + 8.656, + 3.631, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.804, + 3.259, + 7.086, + 10.311, + 13.098, + 11.693, + 11.254, + 9.139, + 8.106, + 3.361, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.815, + 3.158, + 6.541, + 8.161, + 7.599, + 11.716, + 12.436, + 8.18, + 6.953, + 2.262, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.621, + 3.357, + 7.118, + 9.303, + 11.952, + 4.623, + 5.121, + 3.019, + 2.513, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.685, + 3.213, + 2.533, + 5.246, + 11.141, + 10.912, + 12.093, + 10.522, + 8.377, + 1.532, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 3.761, + 8.813, + 13.056, + 15.595, + 16.741, + 16.364, + 14.625, + 11.161, + 5.741, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.854, + 4.051, + 7.057, + 12.99, + 15.485, + 16.584, + 16.375, + 14.566, + 11.116, + 0.457, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.613, + 4.074, + 9.209, + 7.628, + 15.92, + 17.066, + 16.792, + 15.024, + 9.23, + 6.072, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.586, + 4.19, + 9.54, + 13.854, + 16.428, + 17.509, + 17.162, + 15.302, + 11.923, + 6.524, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.051, + 4.214, + 9.483, + 13.497, + 15.872, + 16.874, + 16.425, + 14.634, + 11.381, + 6.312, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.504, + 4.155, + 9.298, + 13.339, + 15.764, + 16.865, + 16.544, + 14.78, + 11.533, + 6.29, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.58, + 4.299, + 9.436, + 13.574, + 15.965, + 16.947, + 16.57, + 14.72, + 9.633, + 1.565, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.169, + 4.02, + 7.013, + 9.735, + 9.228, + 6.415, + 11.417, + 11.418, + 8.929, + 4.456, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.862, + 0.685, + 0.905, + 3.051, + 13.731, + 12.038, + 15.057, + 11.841, + 6.623, + 0.263, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.714, + 4.73, + 9.829, + 13.813, + 16.194, + 17.257, + 16.972, + 15.329, + 12.038, + 6.954, + 0.399, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.902, + 4.804, + 9.698, + 13.497, + 15.953, + 17.135, + 16.977, + 15.388, + 12.21, + 7.109, + 0.495, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.039, + 3.407, + 3.917, + 2.849, + 11.696, + 14.043, + 13.374, + 10.835, + 8.655, + 4.429, + 0.072, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.798, + 5.358, + 11.068, + 15.352, + 18.023, + 19.242, + 18.997, + 17.17, + 13.694, + 8.097, + 0.254, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.797, + 5.333, + 10.831, + 14.815, + 16.968, + 17.706, + 17.106, + 15.53, + 12.682, + 7.74, + 0.266, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.863, + 5.325, + 10.72, + 14.82, + 17.344, + 18.445, + 14.163, + 3.404, + 1.094, + 1.768, + 0.653, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.993, + 5.451, + 10.7, + 14.647, + 17.124, + 18.23, + 17.915, + 16.222, + 12.981, + 7.738, + 0.921, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.147, + 5.778, + 11.399, + 12.94, + 14.353, + 19.373, + 19.061, + 17.195, + 1.398, + 1.681, + 0.088, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.051, + 5.991, + 11.675, + 15.795, + 18.394, + 19.542, + 19.267, + 17.454, + 14.034, + 0.235, + 0.622, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.883, + 5.09, + 6.022, + 8.41, + 11.963, + 2.3, + 12.338, + 8.253, + 2.678, + 3.788, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.691, + 4.998, + 7.787, + 10.362, + 13.23, + 12.053, + 11.624, + 8.526, + 6.059, + 2.79, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037, + 1.835, + 5.086, + 9.012, + 12.996, + 14.339, + 14.349, + 16.608, + 13.091, + 8.262, + 3.715, + 0.148, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.176, + 1.345, + 6.159, + 9.128, + 12.631, + 14.334, + 15.493, + 12.617, + 11.426, + 12.821, + 7.912, + 1.241, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.227, + 1.426, + 6.267, + 11.198, + 14.698, + 12.278, + 17.994, + 17.753, + 13.414, + 12.84, + 3.989, + 1.272, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.098, + 1.964, + 5.187, + 8.038, + 14.783, + 17.108, + 14.91, + 17.991, + 16.196, + 12.89, + 8.021, + 1.392, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.138, + 1.65, + 6.803, + 12.063, + 13.423, + 15.1, + 14.515, + 14.666, + 14.325, + 10.812, + 8.666, + 0.261, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.136, + 1.687, + 7.133, + 12.588, + 16.3, + 18.531, + 19.37, + 18.913, + 17.145, + 13.86, + 6.935, + 1.138, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.158, + 1.896, + 6.876, + 12.18, + 15.692, + 17.687, + 18.139, + 17.323, + 15.884, + 10.272, + 6.555, + 1.705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.155, + 1.828, + 6.129, + 12.216, + 15.783, + 18.014, + 18.874, + 18.535, + 16.687, + 13.468, + 8.586, + 1.922, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.225, + 2.272, + 6.203, + 12.779, + 13.928, + 14.585, + 16.459, + 14.48, + 13.228, + 9.16, + 6.346, + 1.252, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.242, + 2.081, + 7.492, + 12.857, + 16.488, + 18.752, + 19.631, + 19.069, + 17.199, + 13.9, + 8.906, + 2.197, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.296, + 2.243, + 7.581, + 12.708, + 16.333, + 18.593, + 19.595, + 19.162, + 17.28, + 14.037, + 9.102, + 2.472, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.323, + 2.305, + 7.732, + 12.788, + 15.999, + 18.083, + 18.943, + 18.655, + 17.039, + 13.909, + 9.1, + 2.548, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.316, + 2.364, + 7.913, + 13.145, + 16.718, + 18.916, + 19.69, + 19.242, + 17.26, + 13.949, + 9.116, + 2.481, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.444, + 2.644, + 7.767, + 12.404, + 15.636, + 17.456, + 18.623, + 18.482, + 16.961, + 13.995, + 9.358, + 2.797, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.34, + 2.581, + 8.318, + 13.523, + 17.119, + 19.444, + 20.389, + 19.95, + 18.173, + 13.26, + 6.842, + 1.98, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.429, + 2.835, + 8.592, + 13.931, + 17.458, + 19.612, + 20.313, + 19.672, + 17.9, + 14.654, + 9.923, + 3.192, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.401, + 2.894, + 8.66, + 13.897, + 17.4, + 19.535, + 20.217, + 19.448, + 17.458, + 14.279, + 9.689, + 3.119, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.61, + 2.906, + 6.425, + 12.418, + 14.984, + 15.417, + 15.906, + 15.664, + 12.439, + 14.043, + 9.474, + 2.917, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.477, + 3.0, + 8.374, + 13.139, + 16.493, + 18.659, + 19.566, + 19.221, + 17.377, + 14.095, + 9.256, + 2.635, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.686, + 3.376, + 8.458, + 12.981, + 15.823, + 17.668, + 18.849, + 18.847, + 17.343, + 14.22, + 9.485, + 2.915, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.626, + 3.363, + 7.294, + 10.685, + 15.712, + 15.854, + 16.151, + 15.152, + 14.694, + 13.712, + 6.511, + 1.755, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.672, + 3.456, + 7.385, + 12.021, + 16.678, + 18.614, + 19.18, + 18.562, + 12.426, + 12.099, + 6.872, + 2.646, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.691, + 3.559, + 8.683, + 13.266, + 16.891, + 19.113, + 20.042, + 17.306, + 17.582, + 14.436, + 9.511, + 2.897, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.674, + 3.646, + 9.307, + 14.322, + 17.884, + 20.182, + 5.358, + 12.961, + 13.435, + 9.163, + 3.608, + 3.068, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.76, + 3.835, + 9.444, + 14.202, + 17.419, + 19.434, + 20.44, + 20.037, + 18.198, + 14.849, + 3.884, + 3.299, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.83, + 4.046, + 9.238, + 13.599, + 16.592, + 16.393, + 17.024, + 16.237, + 15.677, + 13.799, + 9.204, + 3.148, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.748, + 3.522, + 7.557, + 13.43, + 16.979, + 18.416, + 15.362, + 16.666, + 17.592, + 13.338, + 6.108, + 1.519, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.627, + 4.3, + 10.304, + 15.225, + 18.679, + 20.863, + 21.631, + 21.005, + 19.115, + 15.74, + 10.897, + 4.184, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.681, + 4.189, + 9.831, + 14.609, + 18.053, + 20.271, + 21.172, + 20.875, + 19.036, + 15.626, + 0.14, + 0.072, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.751, + 4.548, + 10.61, + 15.647, + 19.16, + 21.415, + 22.167, + 21.607, + 19.547, + 16.142, + 11.122, + 4.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.671, + 4.549, + 10.405, + 15.1, + 18.324, + 20.215, + 20.757, + 16.919, + 18.393, + 15.205, + 10.655, + 4.2, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.891, + 4.525, + 8.655, + 11.807, + 16.494, + 18.545, + 19.65, + 19.475, + 17.947, + 14.816, + 10.349, + 3.892, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.088, + 4.915, + 7.897, + 12.704, + 17.869, + 20.039, + 20.985, + 20.587, + 18.792, + 15.602, + 10.835, + 4.131, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.116, + 5.159, + 10.969, + 15.718, + 19.101, + 21.223, + 22.101, + 21.564, + 19.579, + 9.646, + 10.78, + 4.059, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.21, + 5.43, + 11.141, + 15.886, + 19.317, + 21.36, + 22.031, + 21.36, + 19.323, + 15.887, + 10.881, + 4.249, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.106, + 5.357, + 11.085, + 15.569, + 18.691, + 20.417, + 20.852, + 20.202, + 18.483, + 15.523, + 10.951, + 4.399, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.251, + 5.252, + 10.536, + 14.89, + 18.028, + 20.082, + 20.863, + 20.394, + 18.484, + 15.139, + 10.692, + 4.265, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.185, + 5.336, + 10.712, + 15.048, + 18.231, + 20.33, + 21.241, + 20.841, + 18.903, + 15.467, + 9.763, + 4.13, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.0, + 5.501, + 11.098, + 15.566, + 18.869, + 20.987, + 21.906, + 21.349, + 19.436, + 16.15, + 11.508, + 4.85, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011, + 5.511, + 7.783, + 15.85, + 4.271, + 11.909, + 22.188, + 21.609, + 16.641, + 10.795, + 1.772, + 0.074, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.504, + 5.844, + 7.815, + 15.863, + 19.186, + 21.205, + 18.761, + 21.187, + 11.177, + 5.71, + 5.517, + 1.092, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011, + 5.84, + 11.421, + 4.675, + 0.601, + 1.93, + 0.917, + 3.519, + 3.494, + 6.692, + 2.319, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.746, + 6.112, + 12.102, + 16.672, + 19.832, + 21.827, + 22.441, + 21.728, + 19.722, + 16.505, + 11.766, + 5.226, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.057, + 1.404, + 5.936, + 11.385, + 15.438, + 17.95, + 19.369, + 20.313, + 20.196, + 18.685, + 15.786, + 11.244, + 4.969, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.071, + 1.343, + 5.91, + 11.239, + 15.309, + 18.132, + 19.73, + 20.085, + 19.721, + 18.217, + 15.34, + 11.089, + 4.957, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.084, + 1.236, + 5.911, + 11.155, + 14.885, + 17.411, + 19.075, + 20.124, + 20.06, + 18.499, + 15.544, + 11.248, + 5.227, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.153, + 1.734, + 6.014, + 11.245, + 13.152, + 15.509, + 19.907, + 20.52, + 20.133, + 18.459, + 15.514, + 8.351, + 5.139, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.137, + 1.351, + 6.124, + 11.437, + 15.346, + 17.951, + 19.39, + 19.534, + 18.614, + 16.977, + 14.344, + 10.172, + 4.632, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.108, + 1.565, + 6.038, + 11.086, + 15.01, + 18.165, + 19.65, + 19.777, + 18.734, + 16.725, + 14.398, + 10.726, + 5.17, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.114, + 1.435, + 6.193, + 11.331, + 15.028, + 17.57, + 18.969, + 19.479, + 19.103, + 17.682, + 14.977, + 11.049, + 5.315, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.112, + 1.484, + 6.18, + 11.099, + 15.006, + 18.033, + 19.854, + 20.614, + 20.208, + 18.491, + 15.37, + 11.358, + 5.397, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.149, + 1.792, + 6.584, + 11.844, + 15.762, + 18.693, + 20.566, + 21.219, + 21.03, + 19.25, + 16.231, + 11.99, + 5.813, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.215, + 2.044, + 6.662, + 11.465, + 15.77, + 16.275, + 10.645, + 12.582, + 13.773, + 5.17, + 4.815, + 3.119, + 0.796, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.137, + 5.694, + 8.238, + 10.01, + 5.347, + 13.066, + 16.896, + 15.624, + 9.626, + 11.459, + 7.8, + 5.753, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.201, + 1.742, + 6.792, + 12.159, + 16.323, + 19.376, + 21.309, + 22.031, + 11.014, + 14.349, + 6.203, + 3.66, + 0.604, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.24, + 1.959, + 7.109, + 12.455, + 16.465, + 19.383, + 21.044, + 21.331, + 20.571, + 18.606, + 15.712, + 11.4, + 5.589, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.275, + 2.157, + 7.026, + 12.3, + 16.257, + 19.311, + 20.729, + 20.747, + 19.743, + 17.726, + 15.003, + 11.296, + 5.731, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.315, + 2.226, + 7.084, + 12.196, + 15.924, + 18.512, + 19.835, + 19.881, + 19.236, + 17.709, + 15.094, + 10.873, + 5.187, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.319, + 2.206, + 6.92, + 11.645, + 15.296, + 18.299, + 20.156, + 20.895, + 20.466, + 18.659, + 15.548, + 11.915, + 6.092, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.292, + 2.062, + 7.186, + 12.43, + 16.185, + 18.868, + 20.136, + 19.915, + 19.056, + 18.134, + 15.62, + 11.535, + 5.931, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.331, + 2.164, + 7.107, + 12.097, + 15.741, + 18.292, + 19.52, + 19.523, + 19.243, + 18.119, + 15.48, + 11.34, + 5.673, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.325, + 2.153, + 6.986, + 11.903, + 15.539, + 18.167, + 19.483, + 19.785, + 18.981, + 17.535, + 14.847, + 10.927, + 5.528, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.376, + 2.275, + 6.887, + 11.386, + 14.826, + 17.637, + 19.409, + 20.182, + 19.811, + 18.27, + 15.39, + 11.299, + 5.715, + 0.103, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.403, + 2.402, + 7.32, + 11.766, + 14.351, + 17.419, + 18.113, + 21.545, + 20.994, + 15.537, + 14.178, + 10.182, + 5.149, + 0.176, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.567, + 2.934, + 6.822, + 11.649, + 16.352, + 19.078, + 20.972, + 8.398, + 10.094, + 19.836, + 16.74, + 7.825, + 5.998, + 0.079, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.692, + 3.091, + 7.885, + 7.475, + 16.966, + 20.02, + 21.875, + 20.094, + 10.575, + 2.369, + 13.888, + 8.178, + 6.753, + 0.298, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.473, + 2.693, + 7.978, + 13.116, + 12.71, + 19.802, + 21.33, + 21.704, + 14.966, + 15.476, + 15.802, + 11.459, + 5.771, + 0.079, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.544, + 2.765, + 7.42, + 12.059, + 15.694, + 18.448, + 20.305, + 21.019, + 20.608, + 18.727, + 15.676, + 11.171, + 5.516, + 0.114, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.74, + 3.192, + 7.849, + 12.547, + 16.272, + 19.316, + 21.189, + 21.859, + 21.191, + 19.464, + 16.336, + 11.986, + 6.213, + 0.252, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.638, + 2.98, + 7.763, + 12.589, + 16.354, + 19.297, + 21.108, + 21.761, + 21.272, + 19.577, + 16.618, + 12.414, + 6.714, + 0.378, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.544, + 2.902, + 7.937, + 12.923, + 16.741, + 19.836, + 21.654, + 22.248, + 21.672, + 19.878, + 16.883, + 12.542, + 6.869, + 0.553, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.504, + 3.011, + 8.66, + 13.994, + 17.783, + 20.433, + 22.06, + 22.468, + 21.697, + 20.033, + 17.111, + 12.855, + 7.092, + 0.595, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.65, + 3.094, + 8.338, + 13.345, + 17.156, + 19.956, + 21.727, + 22.386, + 21.824, + 20.099, + 17.053, + 12.711, + 6.882, + 0.529, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.823, + 3.371, + 8.326, + 13.384, + 17.39, + 20.324, + 22.103, + 20.183, + 4.823, + 14.992, + 16.997, + 12.342, + 6.469, + 0.478, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.772, + 3.254, + 8.139, + 13.045, + 16.76, + 19.596, + 21.404, + 22.054, + 21.688, + 19.903, + 13.356, + 10.402, + 5.463, + 0.251, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.701, + 3.181, + 8.135, + 13.209, + 17.251, + 20.27, + 22.143, + 22.873, + 22.2, + 20.471, + 17.412, + 13.098, + 7.336, + 0.77, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.526, + 3.051, + 8.307, + 13.268, + 16.744, + 19.018, + 20.312, + 20.669, + 20.315, + 18.729, + 16.039, + 12.195, + 7.167, + 0.921, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.515, + 3.076, + 8.372, + 13.316, + 16.9, + 19.449, + 20.801, + 21.016, + 20.147, + 18.144, + 15.634, + 12.183, + 7.152, + 0.895, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.529, + 3.037, + 8.132, + 12.899, + 16.452, + 18.801, + 19.952, + 19.898, + 18.897, + 17.849, + 15.802, + 12.098, + 6.913, + 0.832, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.52, + 3.003, + 7.863, + 12.354, + 15.956, + 18.731, + 20.522, + 21.261, + 20.853, + 19.229, + 16.429, + 12.397, + 7.109, + 0.958, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.476, + 3.044, + 8.082, + 12.572, + 15.874, + 18.289, + 19.627, + 20.101, + 19.576, + 18.225, + 15.814, + 11.996, + 6.882, + 0.916, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.574, + 3.043, + 7.829, + 12.305, + 15.844, + 18.646, + 20.346, + 21.107, + 20.71, + 19.153, + 16.463, + 12.594, + 7.458, + 1.189, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.493, + 3.123, + 6.821, + 13.088, + 16.856, + 15.83, + 21.365, + 21.876, + 21.36, + 19.786, + 16.829, + 12.845, + 7.497, + 1.159, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.645, + 3.321, + 8.544, + 13.455, + 17.318, + 20.172, + 21.933, + 22.556, + 22.112, + 20.398, + 17.423, + 13.322, + 7.906, + 1.387, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.806, + 3.541, + 8.594, + 13.494, + 17.283, + 20.291, + 21.984, + 22.588, + 22.014, + 20.246, + 17.331, + 13.135, + 7.599, + 1.226, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.781, + 3.473, + 8.325, + 12.876, + 16.358, + 19.046, + 20.518, + 20.968, + 20.609, + 19.118, + 16.574, + 12.741, + 7.562, + 1.378, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.625, + 3.308, + 8.216, + 12.727, + 16.199, + 18.769, + 20.15, + 20.467, + 20.009, + 18.572, + 16.027, + 12.229, + 7.139, + 1.238, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.685, + 3.361, + 8.055, + 12.496, + 16.011, + 18.76, + 20.408, + 21.018, + 16.304, + 18.977, + 16.174, + 10.836, + 6.591, + 1.258, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.885, + 3.252, + 8.208, + 12.676, + 16.083, + 18.789, + 20.525, + 21.109, + 20.689, + 19.168, + 16.375, + 12.548, + 7.32, + 1.423, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.875, + 3.246, + 6.739, + 7.563, + 14.335, + 16.869, + 14.968, + 10.782, + 3.772, + 13.185, + 6.18, + 12.533, + 6.816, + 1.102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.768, + 3.249, + 7.927, + 12.695, + 15.979, + 18.538, + 20.417, + 19.333, + 14.989, + 16.315, + 14.757, + 9.25, + 4.97, + 0.853, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.672, + 3.093, + 6.631, + 6.507, + 13.036, + 15.504, + 17.901, + 18.174, + 17.667, + 9.206, + 8.506, + 6.644, + 3.054, + 1.15, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.723, + 3.409, + 8.022, + 12.39, + 15.864, + 18.283, + 19.259, + 19.103, + 18.443, + 17.328, + 15.162, + 11.542, + 7.11, + 1.6, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.667, + 3.247, + 7.97, + 12.326, + 15.818, + 18.492, + 20.223, + 20.977, + 20.621, + 19.076, + 16.367, + 12.695, + 7.696, + 1.937, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.626, + 2.056, + 5.09, + 4.123, + 5.043, + 15.982, + 14.164, + 21.274, + 21.184, + 15.436, + 16.823, + 12.552, + 7.239, + 1.17, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.752, + 3.431, + 8.438, + 13.226, + 17.059, + 19.892, + 21.719, + 22.406, + 21.966, + 20.249, + 17.387, + 13.334, + 8.038, + 2.013, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.653, + 3.628, + 9.072, + 14.115, + 18.118, + 21.043, + 22.868, + 23.526, + 22.862, + 21.129, + 18.182, + 14.284, + 8.947, + 2.54, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.583, + 3.653, + 9.248, + 14.386, + 18.304, + 21.139, + 22.598, + 21.951, + 22.467, + 20.708, + 17.811, + 13.881, + 8.72, + 2.572, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.566, + 3.508, + 8.709, + 13.537, + 16.978, + 19.392, + 20.784, + 21.0, + 20.185, + 18.311, + 15.851, + 12.685, + 8.107, + 2.301, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.621, + 3.426, + 8.458, + 13.101, + 16.531, + 18.858, + 20.104, + 20.416, + 20.053, + 18.844, + 16.465, + 12.956, + 8.132, + 2.29, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.589, + 3.311, + 8.188, + 12.799, + 16.432, + 19.242, + 21.056, + 21.83, + 21.543, + 19.994, + 17.255, + 13.528, + 8.494, + 2.457, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.587, + 3.572, + 8.494, + 13.56, + 16.699, + 19.458, + 21.935, + 22.625, + 22.123, + 20.505, + 17.614, + 13.747, + 8.592, + 2.465, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.708, + 3.48, + 8.659, + 13.44, + 17.123, + 19.921, + 21.667, + 22.327, + 21.831, + 20.147, + 17.298, + 13.533, + 8.447, + 2.437, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.643, + 3.462, + 8.516, + 13.099, + 16.318, + 18.43, + 19.333, + 19.625, + 19.687, + 18.789, + 16.452, + 12.996, + 8.014, + 2.215, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.677, + 3.375, + 8.188, + 12.471, + 16.048, + 18.753, + 20.465, + 21.18, + 20.81, + 19.298, + 16.394, + 12.846, + 7.447, + 1.257, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.635, + 3.323, + 8.3, + 13.031, + 16.72, + 19.503, + 21.26, + 21.965, + 21.546, + 19.953, + 17.188, + 13.498, + 8.454, + 2.463, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.729, + 3.422, + 8.353, + 12.971, + 16.408, + 18.745, + 19.968, + 20.375, + 20.113, + 18.921, + 16.539, + 13.046, + 8.153, + 2.289, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.703, + 3.383, + 8.346, + 12.956, + 16.277, + 18.421, + 19.664, + 20.098, + 19.897, + 18.776, + 16.361, + 12.91, + 8.085, + 2.325, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.854, + 3.492, + 8.133, + 12.487, + 15.849, + 18.39, + 20.108, + 20.845, + 20.506, + 18.85, + 16.421, + 12.933, + 8.089, + 2.371, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.703, + 3.354, + 8.081, + 12.541, + 15.928, + 18.391, + 19.834, + 20.509, + 20.305, + 18.912, + 16.422, + 12.792, + 8.065, + 2.375, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.658, + 3.3, + 8.194, + 12.705, + 16.263, + 18.91, + 20.63, + 21.307, + 20.916, + 19.398, + 16.809, + 13.142, + 8.324, + 2.549, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.586, + 3.179, + 8.06, + 12.553, + 15.96, + 18.598, + 20.3, + 21.038, + 20.727, + 19.264, + 16.704, + 13.143, + 8.396, + 2.619, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.561, + 3.157, + 7.986, + 12.432, + 15.791, + 17.931, + 19.896, + 20.814, + 20.562, + 19.186, + 16.127, + 12.572, + 8.169, + 2.159, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.652, + 3.053, + 7.158, + 11.283, + 15.736, + 18.308, + 19.694, + 20.394, + 17.898, + 17.076, + 14.288, + 9.437, + 7.282, + 2.167, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.659, + 3.114, + 7.342, + 11.581, + 14.992, + 18.81, + 19.896, + 20.086, + 20.633, + 19.703, + 17.049, + 13.482, + 8.596, + 2.658, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.636, + 3.061, + 7.57, + 11.63, + 14.99, + 17.523, + 19.178, + 19.814, + 19.416, + 11.481, + 7.237, + 12.009, + 7.6, + 2.234, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.617, + 3.081, + 7.65, + 12.073, + 15.498, + 18.158, + 19.863, + 20.64, + 20.325, + 18.895, + 16.318, + 12.791, + 8.068, + 2.441, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.652, + 3.214, + 8.16, + 12.891, + 16.699, + 19.617, + 21.451, + 22.141, + 21.71, + 20.129, + 17.391, + 13.62, + 8.723, + 2.79, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.702, + 3.28, + 8.357, + 13.048, + 16.365, + 18.587, + 20.073, + 20.825, + 20.706, + 19.54, + 17.07, + 13.535, + 8.658, + 2.748, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.543, + 3.047, + 7.963, + 12.427, + 15.657, + 18.277, + 20.113, + 21.006, + 20.818, + 19.498, + 16.948, + 13.598, + 8.889, + 2.995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.419, + 3.007, + 8.222, + 12.925, + 16.335, + 18.637, + 20.28, + 21.03, + 20.777, + 19.529, + 17.083, + 13.58, + 8.906, + 2.948, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.418, + 3.011, + 8.253, + 13.051, + 16.622, + 19.226, + 20.975, + 21.7, + 21.391, + 19.999, + 17.461, + 13.854, + 9.079, + 3.085, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.411, + 3.009, + 8.179, + 12.794, + 15.913, + 18.087, + 19.54, + 20.209, + 19.977, + 18.787, + 16.535, + 13.178, + 8.705, + 2.938, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.407, + 2.929, + 7.84, + 12.143, + 14.96, + 17.402, + 15.745, + 19.887, + 18.928, + 17.677, + 15.284, + 12.305, + 7.636, + 2.139, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.602, + 2.893, + 7.273, + 11.554, + 14.828, + 17.34, + 18.925, + 19.573, + 17.313, + 18.296, + 15.861, + 12.263, + 7.535, + 2.036, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.829, + 3.264, + 7.157, + 11.429, + 14.743, + 17.332, + 19.098, + 17.414, + 17.208, + 18.235, + 15.755, + 12.137, + 7.312, + 1.812, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.577, + 2.839, + 7.481, + 12.136, + 15.703, + 18.499, + 20.271, + 21.0, + 20.834, + 19.414, + 16.794, + 13.238, + 8.467, + 2.632, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.438, + 2.73, + 7.628, + 12.451, + 16.126, + 18.924, + 20.74, + 21.51, + 21.164, + 19.656, + 17.08, + 13.605, + 8.739, + 2.778, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.512, + 2.774, + 7.484, + 12.032, + 15.537, + 18.099, + 19.894, + 20.652, + 20.472, + 18.999, + 16.214, + 12.469, + 7.475, + 1.835, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.637, + 2.309, + 6.475, + 5.677, + 13.691, + 14.827, + 13.779, + 15.268, + 14.858, + 8.611, + 12.098, + 9.662, + 3.732, + 0.729, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.659, + 2.985, + 7.562, + 12.378, + 16.234, + 19.29, + 21.12, + 21.769, + 21.492, + 20.094, + 17.435, + 13.788, + 8.876, + 2.809, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.412, + 2.661, + 7.653, + 12.445, + 15.994, + 18.672, + 20.429, + 21.158, + 20.941, + 19.619, + 17.082, + 13.478, + 8.635, + 2.705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.37, + 2.539, + 7.543, + 12.263, + 15.673, + 18.216, + 19.989, + 20.677, + 20.433, + 19.079, + 16.551, + 12.988, + 8.233, + 2.444, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.176, + 2.082, + 6.247, + 9.453, + 12.066, + 8.931, + 11.634, + 11.92, + 13.993, + 17.329, + 15.111, + 12.32, + 7.556, + 1.974, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.24, + 2.456, + 6.886, + 11.327, + 14.722, + 17.497, + 19.221, + 19.966, + 19.607, + 18.319, + 15.774, + 12.096, + 7.415, + 1.947, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.412, + 2.379, + 7.006, + 11.678, + 15.242, + 17.996, + 19.791, + 20.535, + 20.307, + 18.932, + 16.451, + 12.894, + 8.116, + 2.301, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.354, + 2.39, + 7.304, + 12.087, + 15.632, + 18.332, + 20.123, + 20.855, + 20.514, + 19.123, + 16.609, + 12.982, + 8.156, + 2.268, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.338, + 2.363, + 7.333, + 12.189, + 15.857, + 18.638, + 20.495, + 21.228, + 20.917, + 19.434, + 16.784, + 13.15, + 8.347, + 2.423, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.319, + 2.295, + 7.197, + 12.017, + 15.679, + 18.592, + 20.494, + 21.299, + 21.049, + 19.664, + 17.09, + 13.489, + 8.646, + 2.534, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.316, + 2.248, + 7.224, + 12.021, + 15.695, + 18.575, + 20.425, + 21.198, + 20.978, + 19.469, + 16.823, + 13.305, + 8.399, + 2.42, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.339, + 2.269, + 7.011, + 11.845, + 15.462, + 18.255, + 20.044, + 20.705, + 20.504, + 19.02, + 16.392, + 12.717, + 7.846, + 1.994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.379, + 2.203, + 6.712, + 11.236, + 14.769, + 17.464, + 19.249, + 19.904, + 19.596, + 18.149, + 15.464, + 11.962, + 6.943, + 0.251, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.063, + 1.723, + 1.913, + 1.767, + 15.139, + 15.74, + 18.763, + 1.654, + 5.228, + 4.518, + 0.583, + 5.584, + 1.077, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.368, + 2.152, + 6.496, + 11.039, + 14.536, + 17.349, + 19.172, + 19.959, + 19.704, + 18.372, + 15.873, + 12.301, + 7.452, + 1.731, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.298, + 2.005, + 6.675, + 11.469, + 15.059, + 17.869, + 19.716, + 20.478, + 20.315, + 18.861, + 16.281, + 12.381, + 7.482, + 1.677, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.296, + 1.987, + 6.656, + 11.461, + 15.033, + 17.695, + 19.498, + 20.337, + 20.095, + 18.736, + 16.257, + 12.491, + 7.593, + 1.685, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.314, + 1.981, + 6.492, + 11.142, + 14.74, + 17.535, + 19.339, + 20.076, + 19.905, + 18.476, + 15.885, + 12.152, + 7.252, + 1.475, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.318, + 2.008, + 6.543, + 11.226, + 14.853, + 17.562, + 19.308, + 20.058, + 19.845, + 18.46, + 15.907, + 12.138, + 7.237, + 1.428, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.279, + 1.935, + 6.494, + 11.301, + 14.846, + 17.478, + 19.256, + 19.961, + 19.552, + 18.21, + 15.743, + 12.183, + 7.302, + 1.396, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.277, + 1.926, + 6.461, + 11.157, + 14.735, + 17.458, + 19.252, + 20.004, + 19.845, + 18.401, + 15.827, + 12.101, + 7.15, + 1.257, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.257, + 1.907, + 6.328, + 11.005, + 14.517, + 17.224, + 18.964, + 19.652, + 19.248, + 17.747, + 15.099, + 11.602, + 6.664, + 0.979, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.445, + 0.244, + 9.644, + 14.675, + 15.67, + 16.985, + 17.792, + 19.474, + 18.107, + 15.45, + 11.881, + 6.897, + 1.001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.257, + 1.905, + 6.239, + 10.913, + 14.484, + 17.263, + 19.174, + 19.985, + 19.684, + 18.345, + 15.729, + 12.158, + 7.157, + 1.105, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.203, + 1.72, + 6.325, + 11.132, + 14.61, + 17.301, + 18.962, + 19.73, + 19.553, + 18.2, + 15.646, + 11.937, + 6.908, + 0.953, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.21, + 1.856, + 6.212, + 10.95, + 14.518, + 17.207, + 19.022, + 19.712, + 15.386, + 17.93, + 15.242, + 11.522, + 6.406, + 0.706, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.217, + 2.192, + 6.299, + 10.989, + 14.74, + 17.707, + 19.651, + 20.537, + 20.145, + 18.696, + 15.943, + 12.301, + 7.041, + 0.876, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.202, + 1.768, + 6.584, + 11.867, + 15.821, + 18.91, + 20.842, + 21.554, + 21.234, + 19.621, + 16.745, + 12.821, + 7.433, + 1.013, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.137, + 1.578, + 6.425, + 11.605, + 15.446, + 18.308, + 20.25, + 21.053, + 20.682, + 19.136, + 16.377, + 12.56, + 7.246, + 0.888, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.136, + 1.561, + 6.437, + 11.529, + 15.271, + 17.986, + 19.94, + 20.833, + 20.571, + 19.104, + 16.408, + 12.695, + 7.357, + 0.958, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.121, + 1.494, + 6.328, + 11.422, + 15.243, + 18.133, + 20.093, + 20.986, + 20.639, + 19.165, + 16.382, + 12.605, + 7.244, + 0.889, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.106, + 1.441, + 6.226, + 11.253, + 15.072, + 17.961, + 19.911, + 20.796, + 20.479, + 19.015, + 16.298, + 12.479, + 7.121, + 0.68, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.124, + 1.434, + 6.109, + 11.295, + 15.277, + 18.23, + 20.158, + 20.883, + 20.6, + 19.014, + 16.215, + 12.381, + 6.986, + 0.645, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.109, + 1.389, + 5.86, + 10.811, + 14.555, + 17.336, + 19.103, + 19.814, + 19.508, + 17.914, + 15.229, + 11.621, + 6.468, + 0.471, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.108, + 1.342, + 5.741, + 10.667, + 14.278, + 17.035, + 18.871, + 19.646, + 19.429, + 17.978, + 15.34, + 11.554, + 6.347, + 0.412, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094, + 1.303, + 5.642, + 10.464, + 13.657, + 14.051, + 18.776, + 19.464, + 16.283, + 13.253, + 13.1, + 10.107, + 4.9, + 0.189, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08, + 1.549, + 5.577, + 10.353, + 14.068, + 16.756, + 18.54, + 19.283, + 18.949, + 17.499, + 14.697, + 10.384, + 5.073, + 0.045, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.069, + 1.455, + 5.527, + 10.24, + 13.871, + 16.369, + 18.108, + 18.828, + 18.483, + 17.007, + 14.179, + 10.037, + 4.841, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.106, + 1.391, + 5.428, + 10.185, + 13.891, + 16.755, + 18.569, + 19.365, + 19.073, + 17.573, + 14.769, + 10.773, + 5.425, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.106, + 1.214, + 5.514, + 10.419, + 14.278, + 17.178, + 19.061, + 19.876, + 19.514, + 17.957, + 15.255, + 11.334, + 5.887, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.124, + 1.52, + 5.628, + 10.789, + 13.452, + 17.64, + 17.972, + 20.261, + 19.901, + 18.266, + 15.438, + 11.488, + 5.972, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.093, + 1.097, + 5.703, + 10.824, + 14.647, + 17.418, + 19.302, + 20.126, + 19.673, + 18.114, + 15.285, + 11.29, + 5.753, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.074, + 1.054, + 5.498, + 10.591, + 14.403, + 17.132, + 18.851, + 19.55, + 19.177, + 17.585, + 14.837, + 10.79, + 5.183, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059, + 1.009, + 5.411, + 10.532, + 14.394, + 17.253, + 19.046, + 19.656, + 19.338, + 17.656, + 14.753, + 10.778, + 5.242, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.062, + 1.095, + 5.551, + 10.83, + 14.866, + 17.77, + 19.698, + 20.404, + 19.948, + 18.275, + 15.391, + 11.303, + 5.568, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.045, + 0.992, + 5.323, + 10.393, + 14.272, + 17.141, + 18.977, + 19.685, + 19.39, + 17.739, + 14.88, + 10.844, + 5.201, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026, + 1.04, + 5.034, + 9.903, + 13.85, + 16.73, + 18.593, + 19.372, + 16.448, + 14.874, + 12.077, + 9.902, + 4.458, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.295, + 5.069, + 9.274, + 12.54, + 16.311, + 16.017, + 15.713, + 16.058, + 4.71, + 2.912, + 8.371, + 3.999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.011, + 4.878, + 9.684, + 13.542, + 16.44, + 18.289, + 19.007, + 18.668, + 17.092, + 14.163, + 10.169, + 4.549, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.818, + 4.886, + 9.687, + 13.303, + 16.084, + 17.918, + 18.667, + 18.337, + 16.771, + 14.037, + 10.016, + 4.483, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.794, + 4.797, + 9.466, + 12.98, + 15.518, + 17.054, + 17.679, + 17.425, + 11.391, + 7.726, + 8.48, + 3.924, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.153, + 4.728, + 9.457, + 13.279, + 16.211, + 18.076, + 18.784, + 9.189, + 0.971, + 13.613, + 1.779, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.001, + 4.64, + 9.098, + 12.692, + 15.538, + 17.181, + 17.852, + 17.542, + 14.043, + 11.355, + 9.959, + 4.122, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.765, + 4.857, + 9.793, + 13.659, + 16.467, + 18.331, + 19.117, + 18.719, + 17.062, + 14.095, + 9.89, + 4.029, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.746, + 4.826, + 9.679, + 13.169, + 15.971, + 17.748, + 5.394, + 0.603, + 0.472, + 13.772, + 9.618, + 3.836, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.74, + 4.665, + 9.548, + 13.511, + 16.301, + 18.046, + 18.664, + 7.033, + 5.924, + 1.419, + 5.997, + 3.512, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.901, + 4.575, + 9.478, + 13.332, + 16.079, + 17.732, + 18.303, + 17.781, + 16.02, + 13.114, + 8.775, + 3.06, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.763, + 4.491, + 9.288, + 13.097, + 15.776, + 17.365, + 17.894, + 17.328, + 15.661, + 4.813, + 8.66, + 0.579, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.755, + 4.419, + 9.312, + 13.176, + 16.027, + 17.801, + 18.504, + 18.049, + 16.297, + 13.234, + 8.892, + 2.982, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.791, + 4.453, + 9.334, + 13.278, + 16.134, + 17.92, + 18.638, + 18.156, + 16.267, + 12.99, + 8.532, + 2.665, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.708, + 4.706, + 9.981, + 14.198, + 17.162, + 18.97, + 19.61, + 19.189, + 17.301, + 14.121, + 9.338, + 3.102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.769, + 4.777, + 10.114, + 14.391, + 17.361, + 19.231, + 19.773, + 19.176, + 17.273, + 14.054, + 9.407, + 3.102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.738, + 4.568, + 9.591, + 13.68, + 16.69, + 18.568, + 19.235, + 18.686, + 16.903, + 13.824, + 9.241, + 3.039, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.595, + 4.386, + 9.516, + 13.481, + 16.271, + 17.822, + 18.111, + 17.224, + 15.327, + 12.541, + 8.465, + 2.701, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.665, + 4.263, + 9.186, + 13.098, + 15.798, + 17.31, + 17.624, + 16.688, + 14.951, + 12.192, + 8.041, + 2.29, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.824, + 4.159, + 9.076, + 13.061, + 15.851, + 17.618, + 18.254, + 17.613, + 15.644, + 12.33, + 7.044, + 1.421, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.188, + 4.588, + 9.188, + 13.038, + 16.106, + 17.918, + 18.437, + 17.897, + 15.71, + 12.021, + 7.813, + 1.749, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.813, + 4.534, + 10.053, + 14.627, + 17.92, + 19.892, + 20.466, + 19.795, + 17.611, + 14.086, + 9.068, + 2.43, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.563, + 4.481, + 10.21, + 14.847, + 18.023, + 19.959, + 20.519, + 19.683, + 17.567, + 14.166, + 9.065, + 2.265, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.563, + 4.369, + 9.988, + 14.413, + 17.5, + 19.303, + 19.723, + 18.931, + 16.867, + 13.521, + 8.722, + 2.049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.535, + 4.16, + 9.487, + 13.629, + 16.393, + 17.991, + 18.385, + 17.554, + 15.781, + 12.769, + 8.137, + 1.579, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.72, + 4.108, + 9.266, + 13.568, + 16.743, + 18.611, + 19.268, + 18.58, + 16.612, + 13.117, + 8.088, + 1.312, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.547, + 4.082, + 9.581, + 13.861, + 16.711, + 18.317, + 18.64, + 17.748, + 15.779, + 12.549, + 7.914, + 1.297, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.487, + 3.878, + 9.123, + 13.391, + 16.327, + 18.151, + 18.713, + 17.894, + 15.818, + 12.383, + 7.403, + 0.988, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.973, + 4.123, + 8.85, + 13.038, + 16.559, + 18.539, + 19.19, + 18.464, + 16.441, + 13.05, + 7.928, + 1.112, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.482, + 3.92, + 9.567, + 14.14, + 17.236, + 19.082, + 19.559, + 18.729, + 16.56, + 13.006, + 7.76, + 0.995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.477, + 3.815, + 9.33, + 13.767, + 16.692, + 18.401, + 18.744, + 17.861, + 15.719, + 12.357, + 7.376, + 0.875, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.497, + 3.713, + 9.129, + 13.475, + 16.426, + 18.091, + 18.412, + 17.497, + 15.47, + 12.166, + 7.193, + 0.69, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.538, + 3.548, + 8.564, + 12.809, + 15.764, + 17.555, + 18.123, + 17.532, + 15.551, + 12.181, + 7.058, + 0.562, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.468, + 3.517, + 8.774, + 12.996, + 15.818, + 17.48, + 17.893, + 17.191, + 15.256, + 11.952, + 6.891, + 0.509, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.619, + 3.316, + 7.553, + 13.04, + 14.095, + 14.175, + 15.215, + 11.414, + 5.835, + 11.952, + 6.806, + 0.354, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.588, + 3.447, + 8.332, + 12.347, + 14.086, + 15.54, + 15.732, + 14.241, + 11.181, + 7.982, + 2.808, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.552, + 3.367, + 8.359, + 11.415, + 14.295, + 14.435, + 9.866, + 12.037, + 7.534, + 7.944, + 1.394, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.406, + 3.112, + 8.016, + 12.202, + 15.057, + 16.815, + 17.429, + 16.694, + 14.635, + 11.231, + 6.114, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.769, + 3.127, + 7.974, + 12.206, + 15.046, + 16.789, + 17.376, + 16.65, + 14.568, + 11.165, + 6.033, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.457, + 3.087, + 8.133, + 12.518, + 15.511, + 17.261, + 17.864, + 17.017, + 14.805, + 11.163, + 5.823, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.613, + 3.268, + 8.436, + 12.972, + 16.077, + 17.87, + 18.367, + 17.517, + 11.463, + 7.906, + 0.352, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.622, + 1.555, + 5.402, + 13.13, + 9.192, + 18.02, + 18.5, + 4.209, + 6.04, + 11.742, + 0.093, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.475, + 3.179, + 8.735, + 13.447, + 16.463, + 18.264, + 2.896, + 6.471, + 0.388, + 0.598, + 3.025, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.413, + 3.124, + 8.494, + 13.19, + 16.123, + 17.788, + 18.09, + 17.068, + 14.841, + 11.06, + 5.503, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.43, + 2.964, + 8.189, + 12.747, + 15.674, + 17.261, + 17.6, + 16.678, + 14.532, + 11.011, + 5.449, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.386, + 2.863, + 8.077, + 12.509, + 15.117, + 16.466, + 16.747, + 15.902, + 13.883, + 10.56, + 5.252, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.407, + 2.777, + 7.784, + 12.278, + 13.152, + 14.341, + 17.103, + 16.077, + 13.779, + 10.082, + 4.753, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.368, + 2.668, + 7.712, + 12.233, + 14.994, + 16.536, + 16.87, + 15.925, + 13.781, + 10.197, + 4.73, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.36, + 2.536, + 7.678, + 12.197, + 15.044, + 16.699, + 17.09, + 16.155, + 13.885, + 10.233, + 4.812, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.361, + 2.539, + 7.612, + 11.986, + 14.643, + 15.998, + 16.075, + 15.096, + 13.192, + 9.851, + 4.6, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.32, + 2.44, + 7.271, + 10.096, + 12.851, + 15.607, + 14.286, + 12.487, + 13.282, + 8.417, + 4.073, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.411, + 2.681, + 7.166, + 11.339, + 14.112, + 15.67, + 16.022, + 15.475, + 13.26, + 9.488, + 3.784, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.331, + 2.364, + 7.162, + 11.584, + 14.51, + 16.241, + 16.665, + 15.786, + 13.555, + 9.736, + 4.066, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.311, + 2.281, + 7.3, + 11.813, + 14.744, + 16.332, + 16.557, + 15.484, + 13.232, + 9.447, + 3.93, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.289, + 2.262, + 7.284, + 11.897, + 14.826, + 16.39, + 16.597, + 15.462, + 13.229, + 9.479, + 3.86, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.313, + 2.252, + 7.157, + 11.524, + 14.457, + 16.176, + 16.658, + 15.687, + 13.406, + 9.492, + 3.47, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.334, + 2.274, + 7.129, + 11.541, + 14.438, + 15.956, + 16.164, + 15.228, + 13.072, + 9.249, + 3.208, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.312, + 2.18, + 7.001, + 11.357, + 14.147, + 15.547, + 15.702, + 14.731, + 12.588, + 8.855, + 3.136, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.28, + 2.024, + 6.88, + 11.411, + 14.394, + 16.037, + 16.346, + 15.359, + 13.036, + 9.053, + 3.426, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.214, + 1.962, + 6.775, + 11.261, + 14.182, + 15.74, + 15.958, + 14.973, + 12.691, + 8.807, + 3.13, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.247, + 2.059, + 6.526, + 10.806, + 13.79, + 15.383, + 15.617, + 13.259, + 7.312, + 5.248, + 1.5, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.233, + 2.128, + 6.553, + 10.882, + 13.936, + 15.505, + 15.74, + 14.7, + 12.001, + 7.754, + 2.23, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.222, + 2.069, + 6.622, + 11.275, + 14.564, + 16.468, + 17.003, + 16.056, + 13.67, + 9.295, + 3.168, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.183, + 1.82, + 6.82, + 11.631, + 14.793, + 16.41, + 16.642, + 15.643, + 13.252, + 9.113, + 3.114, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.168, + 1.803, + 6.723, + 11.505, + 14.63, + 16.209, + 16.416, + 15.225, + 12.787, + 8.652, + 2.824, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.17, + 1.702, + 6.454, + 11.054, + 14.151, + 15.717, + 15.991, + 14.928, + 12.536, + 8.39, + 2.594, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.135, + 1.58, + 6.265, + 10.822, + 13.762, + 15.256, + 15.45, + 10.438, + 11.008, + 6.52, + 2.401, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.121, + 1.505, + 6.123, + 8.593, + 13.301, + 14.898, + 15.278, + 14.395, + 12.195, + 8.089, + 0.868, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.111, + 1.472, + 6.093, + 10.785, + 12.562, + 10.557, + 8.411, + 14.887, + 9.297, + 7.386, + 1.712, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.179, + 1.506, + 6.017, + 10.54, + 13.771, + 15.338, + 15.607, + 14.734, + 12.395, + 8.181, + 2.167, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.142, + 1.336, + 6.163, + 11.013, + 14.4, + 16.15, + 16.417, + 15.313, + 12.699, + 8.309, + 2.045, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.141, + 1.287, + 5.928, + 10.61, + 13.878, + 15.557, + 15.833, + 14.746, + 12.27, + 7.838, + 1.754, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.102, + 1.2, + 5.552, + 10.171, + 13.398, + 15.098, + 15.38, + 14.352, + 11.872, + 7.655, + 1.627, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.1, + 1.192, + 5.463, + 9.989, + 13.084, + 14.6, + 14.84, + 13.821, + 11.551, + 7.531, + 1.552, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.065, + 1.098, + 5.31, + 9.761, + 12.764, + 14.369, + 14.708, + 13.77, + 11.458, + 7.348, + 1.466, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.118, + 1.097, + 5.239, + 9.699, + 12.782, + 14.311, + 14.504, + 13.489, + 11.117, + 6.982, + 1.239, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.048, + 1.058, + 5.113, + 9.334, + 12.293, + 14.013, + 11.369, + 13.571, + 11.24, + 7.031, + 1.249, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.991, + 5.151, + 9.727, + 13.067, + 14.741, + 15.09, + 14.026, + 11.551, + 7.148, + 1.165, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.426, + 5.125, + 9.344, + 12.694, + 14.345, + 14.673, + 10.178, + 10.766, + 6.377, + 0.096, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.354, + 4.257, + 9.266, + 12.606, + 14.296, + 14.652, + 13.697, + 11.265, + 6.974, + 1.145, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.414, + 4.228, + 9.115, + 12.36, + 12.066, + 11.27, + 9.55, + 8.293, + 4.602, + 0.094, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.703, + 4.76, + 7.068, + 12.597, + 14.373, + 14.796, + 13.834, + 11.338, + 6.902, + 0.414, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.977, + 4.69, + 9.164, + 12.483, + 14.209, + 14.572, + 13.541, + 11.019, + 6.674, + 0.883, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.804, + 4.882, + 9.83, + 13.423, + 15.217, + 15.523, + 14.472, + 11.874, + 7.243, + 1.037, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.775, + 4.611, + 9.296, + 12.773, + 14.529, + 14.88, + 13.781, + 11.262, + 5.69, + 0.257, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.241, + 3.94, + 9.123, + 10.222, + 12.105, + 8.463, + 6.546, + 3.106, + 5.548, + 0.219, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.706, + 3.666, + 8.615, + 9.429, + 10.587, + 4.992, + 13.362, + 10.813, + 6.42, + 0.63, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.677, + 4.259, + 8.734, + 12.135, + 11.94, + 10.773, + 9.796, + 5.035, + 1.991, + 0.032, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.629, + 4.179, + 8.69, + 12.064, + 13.803, + 14.112, + 13.074, + 10.561, + 6.274, + 0.642, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.101, + 3.672, + 6.884, + 11.654, + 13.541, + 13.947, + 13.023, + 10.51, + 4.382, + 0.22, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.553, + 4.089, + 8.824, + 12.437, + 14.38, + 14.769, + 13.728, + 11.075, + 6.625, + 0.241, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.027, + 3.974, + 8.603, + 12.067, + 14.006, + 14.454, + 13.528, + 11.003, + 6.614, + 0.705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.005, + 3.926, + 8.391, + 11.687, + 13.608, + 14.052, + 13.091, + 10.524, + 6.307, + 0.657, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.908, + 3.724, + 8.181, + 11.471, + 13.114, + 13.431, + 12.646, + 10.251, + 6.229, + 0.693, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.915, + 3.314, + 6.466, + 9.691, + 10.496, + 10.391, + 12.058, + 9.914, + 5.922, + 0.522, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.889, + 3.232, + 7.967, + 11.418, + 13.435, + 13.909, + 13.096, + 10.551, + 6.356, + 0.67, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.52, + 3.551, + 7.944, + 11.419, + 13.43, + 13.871, + 12.987, + 10.381, + 2.878, + 0.03, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.443, + 2.876, + 4.849, + 0.354, + 1.992, + 0.751, + 0.942, + 2.574, + 1.65, + 0.543, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.554, + 3.381, + 6.793, + 9.543, + 10.257, + 11.143, + 8.451, + 3.824, + 0.593, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.854, + 2.342, + 2.337, + 3.643, + 8.76, + 8.732, + 10.009, + 7.794, + 5.709, + 0.241, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.557, + 0.145, + 7.728, + 7.342, + 9.138, + 10.195, + 5.521, + 0.164, + 6.093, + 0.142, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.48, + 3.32, + 7.935, + 11.682, + 13.876, + 14.39, + 13.502, + 10.83, + 6.286, + 0.162, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.47, + 3.17, + 7.579, + 11.132, + 13.232, + 11.375, + 12.873, + 7.425, + 4.595, + 0.449, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.437, + 3.079, + 7.605, + 11.165, + 13.297, + 13.787, + 9.367, + 10.283, + 6.038, + 0.485, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.411, + 3.036, + 7.642, + 11.385, + 13.593, + 14.08, + 13.195, + 10.555, + 6.145, + 0.496, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.49, + 3.095, + 7.721, + 10.412, + 11.919, + 13.988, + 10.748, + 10.481, + 6.267, + 0.556, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.475, + 2.981, + 7.414, + 11.128, + 13.392, + 14.092, + 5.793, + 4.005, + 6.107, + 0.484, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.502, + 2.994, + 6.4, + 7.555, + 13.228, + 0.801, + 5.287, + 2.176, + 3.272, + 0.36, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.415, + 2.886, + 7.502, + 11.257, + 13.597, + 14.182, + 13.254, + 10.638, + 6.314, + 0.574, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.372, + 2.766, + 7.414, + 11.238, + 13.517, + 14.064, + 13.199, + 10.6, + 6.303, + 0.615, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.417, + 2.642, + 7.145, + 10.707, + 12.731, + 13.351, + 12.591, + 10.189, + 6.081, + 0.566, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.458, + 2.669, + 7.102, + 8.705, + 9.881, + 9.776, + 2.218, + 7.864, + 6.198, + 0.2, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.401, + 2.659, + 7.286, + 11.197, + 13.609, + 14.296, + 13.513, + 10.936, + 6.591, + 0.797, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.352, + 2.586, + 7.15, + 10.886, + 13.129, + 13.713, + 12.934, + 10.497, + 6.375, + 0.233, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.439, + 1.949, + 6.876, + 8.98, + 10.403, + 13.54, + 11.709, + 10.438, + 6.297, + 0.767, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.376, + 2.557, + 7.09, + 10.814, + 13.056, + 13.666, + 12.866, + 10.478, + 6.403, + 0.756, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.372, + 2.487, + 6.886, + 10.409, + 12.436, + 13.149, + 12.439, + 10.102, + 6.096, + 0.614, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.507, + 2.446, + 5.095, + 9.256, + 12.797, + 11.032, + 13.187, + 10.791, + 6.558, + 0.635, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.376, + 2.419, + 6.796, + 10.496, + 10.211, + 13.576, + 12.843, + 10.421, + 6.308, + 0.778, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.356, + 2.382, + 6.789, + 10.469, + 12.75, + 13.427, + 8.013, + 8.719, + 2.638, + 0.105, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.311, + 2.301, + 6.637, + 10.413, + 12.734, + 13.434, + 12.775, + 9.332, + 6.309, + 0.359, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.306, + 2.319, + 7.011, + 10.981, + 13.37, + 11.537, + 9.378, + 7.642, + 3.299, + 0.181, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.308, + 2.287, + 6.929, + 10.787, + 11.146, + 12.41, + 13.238, + 10.903, + 6.899, + 1.16, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.281, + 2.17, + 6.615, + 8.633, + 10.351, + 10.293, + 9.033, + 6.916, + 3.347, + 0.195, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.456, + 2.167, + 3.647, + 6.588, + 9.624, + 11.181, + 8.516, + 4.996, + 6.492, + 0.482, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.24, + 2.23, + 5.558, + 6.605, + 4.181, + 3.942, + 1.209, + 2.744, + 2.219, + 0.117, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.428, + 0.21, + 3.639, + 2.308, + 3.387, + 1.377, + 3.014, + 8.037, + 1.641, + 0.99, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.346, + 1.164, + 4.272, + 1.481, + 4.055, + 4.134, + 3.569, + 2.565, + 2.221, + 0.151, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.343, + 2.189, + 6.472, + 10.372, + 12.8, + 10.716, + 9.662, + 10.852, + 5.067, + 1.576, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "size_kw": 30.0, + "lifecycle_om_cost_after_tax_bau": 4692.0, + "name": "roof_west", + "annual_energy_produced_kwh": 45938.58, + "year_one_energy_produced_kwh_bau": 48062.0, + "year_one_energy_produced_kwh": 48062.0, + "annual_energy_exported_kwh": 0.0, + "electric_to_storage_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "electric_curtailed_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "lifecycle_om_cost_after_tax": 4692.0, + "lcoe_per_kwh": 0.0 + }, + { + "electric_to_grid_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "production_factor_series": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022978000000000002, + 0.27288999999999997, + 0.445854, + 0.5465420000000001, + 0.591682, + 0.583673, + 0.5242279999999999, + 0.411019, + 0.236401, + 0.034754, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022653, + 0.276824, + 0.45223599999999997, + 0.5536369999999999, + 0.5995119999999999, + 0.592028, + 0.528977, + 0.416471, + 0.241361, + 0.008482, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022562000000000002, + 0.145619, + 0.4562, + 0.564461, + 0.6166470000000001, + 0.6099439999999999, + 0.5502720000000001, + 0.434185, + 0.254059, + 0.039703, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06387, + 0.280279, + 0.45767, + 0.5616319999999999, + 0.60687, + 0.599073, + 0.539341, + 0.425978, + 0.250363, + 0.039555, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022278, + 0.270249, + 0.443043, + 0.544181, + 0.589649, + 0.582188, + 0.430776, + 0.289503, + 0.24606299999999998, + 0.023436, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024863, + 0.26920299999999997, + 0.433961, + 0.385355, + 0.38497000000000003, + 0.45489999999999997, + 0.5196219999999999, + 0.414036, + 0.247006, + 0.042544, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.058472, + 0.260633, + 0.426284, + 0.527544, + 0.576386, + 0.573664, + 0.52089, + 0.413633, + 0.245071, + 0.044734, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.061723999999999994, + 0.275969, + 0.457096, + 0.567693, + 0.62141, + 0.616001, + 0.556507, + 0.445408, + 0.265272, + 0.052107, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021593, + 0.150088, + 0.449024, + 0.550481, + 0.59936, + 0.594076, + 0.5386559999999999, + 0.43105099999999996, + 0.260469, + 0.054509999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028431, + 0.269183, + 0.441416, + 0.465824, + 0.44329700000000005, + 0.5058670000000001, + 0.363678, + 0.324168, + 0.17225, + 0.024745, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005305, + 0.030978000000000002, + 0.16019, + 0.509293, + 0.5676509999999999, + 0.45764, + 0.415178, + 0.41879, + 0.231256, + 0.056825, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.056552, + 0.262899, + 0.437574, + 0.543254, + 0.594781, + 0.590759, + 0.533532, + 0.42827499999999996, + 0.26207400000000003, + 0.061966, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.058335, + 0.264675, + 0.434864, + 0.5330560000000001, + 0.58327, + 0.582414, + 0.531679, + 0.42980900000000005, + 0.26372500000000004, + 0.062804, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.062623, + 0.27475499999999997, + 0.450786, + 0.554461, + 0.508286, + 0.445257, + 0.39775099999999997, + 0.372865, + 0.218964, + 0.070658, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031313, + 0.256684, + 0.419742, + 0.399716, + 0.471709, + 0.308034, + 0.522432, + 0.199423, + 0.030479, + 0.019586, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.055816000000000004, + 0.253767, + 0.42849200000000004, + 0.5381670000000001, + 0.593552, + 0.5936520000000001, + 0.542314, + 0.43771899999999997, + 0.27098099999999997, + 0.07117, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.058152999999999996, + 0.255591, + 0.421735, + 0.5235449999999999, + 0.577455, + 0.467109, + 0.530111, + 0.430957, + 0.268392, + 0.073744, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.046487, + 0.202721, + 0.268911, + 0.43532499999999996, + 0.481805, + 0.469433, + 0.325589, + 0.286048, + 0.133246, + 0.020788, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.050829, + 0.046491, + 0.174156, + 0.276293, + 0.26412599999999997, + 0.5861580000000001, + 0.5381079999999999, + 0.27710199999999996, + 0.197701, + 0.020732, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0598, + 0.263193, + 0.442423, + 0.5485119999999999, + 0.605111, + 0.280431, + 0.063109, + 0.089338, + 0.009399, + 0.013535, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027816, + 0.137937, + 0.343021, + 0.447851, + 0.47796, + 0.489751, + 0.381742, + 0.287661, + 0.236998, + 0.08838700000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067565, + 0.275725, + 0.442669, + 0.544751, + 0.602113, + 0.604465, + 0.5524640000000001, + 0.451336, + 0.291688, + 0.089422, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.064446, + 0.264971, + 0.434603, + 0.392749, + 0.482927, + 0.436721, + 0.400306, + 0.351462, + 0.207393, + 0.039549, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019105, + 0.131615, + 0.167436, + 0.24829900000000002, + 0.253054, + 0.266384, + 0.223674, + 0.087664, + 0.046837000000000004, + 0.018527000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0581, + 0.152072, + 0.107938, + 0.17790199999999998, + 0.005713, + 0.580141, + 0.474704, + 0.306535, + 0.09817000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.063698, + 0.17949, + 0.350516, + 0.027392, + 0.47311200000000003, + 0.467771, + 0.382824, + 0.013779999999999999, + 0.293421, + 0.09096299999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.074492, + 0.298854, + 0.489619, + 0.608819, + 0.665207, + 0.6645549999999999, + 0.6121449999999999, + 0.5077889999999999, + 0.33481299999999997, + 0.113911, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08497199999999999, + 0.308612, + 0.492224, + 0.60342, + 0.659079, + 0.658919, + 0.604468, + 0.497025, + 0.329534, + 0.115649, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.084618, + 0.304865, + 0.47912400000000005, + 0.581071, + 0.629161, + 0.625871, + 0.453515, + 0.409361, + 0.20354499999999998, + 0.054633, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036031, + 0.29087, + 0.46480099999999996, + 0.47569900000000004, + 0.519653, + 0.514759, + 0.458504, + 0.379313, + 0.24978, + 0.06993200000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026926, + 0.23562799999999998, + 0.3708, + 0.657019, + 0.661883, + 0.610007, + 0.503558, + 0.336935, + 0.108598, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.070821, + 0.27416199999999996, + 0.448975, + 0.552966, + 0.6066159999999999, + 0.615607, + 0.57377, + 0.481856, + 0.32558499999999996, + 0.11618600000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.090217, + 0.315563, + 0.49589, + 0.507509, + 0.5411180000000001, + 0.513334, + 0.601509, + 0.497702, + 0.340918, + 0.132905, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096163, + 0.318058, + 0.492362, + 0.597247, + 0.6501760000000001, + 0.648783, + 0.596201, + 0.497319, + 0.341725, + 0.135519, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.092016, + 0.30680799999999997, + 0.479341, + 0.5877140000000001, + 0.640606, + 0.640903, + 0.588313, + 0.489339, + 0.33548300000000003, + 0.13215100000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034573, + 0.17678, + 0.308187, + 0.468813, + 0.514845, + 0.479311, + 0.406145, + 0.37342200000000003, + 0.22059, + 0.06787, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.093773, + 0.303268, + 0.46372800000000003, + 0.571534, + 0.630091, + 0.637439, + 0.503395, + 0.408197, + 0.28252, + 0.098532, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.061799999999999994, + 0.23228100000000002, + 0.36229700000000004, + 0.453062, + 0.547335, + 0.45193, + 0.418584, + 0.324337, + 0.265775, + 0.094868, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.056404, + 0.160153, + 0.310853, + 0.335241, + 0.28818299999999997, + 0.453737, + 0.466209, + 0.28936900000000004, + 0.229859, + 0.068694, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.090783, + 0.22418700000000003, + 0.358185, + 0.39674200000000004, + 0.49299, + 0.16425399999999998, + 0.181268, + 0.105452, + 0.08718600000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024269, + 0.15756299999999998, + 0.089691, + 0.192675, + 0.44923599999999997, + 0.41883, + 0.45, + 0.37295, + 0.27366500000000005, + 0.05136, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.311707, + 0.48760899999999996, + 0.600097, + 0.66269, + 0.669376, + 0.6187290000000001, + 0.520137, + 0.36028899999999997, + 0.148734, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10135, + 0.309293, + 0.33135000000000003, + 0.59323, + 0.6552250000000001, + 0.6597540000000001, + 0.6183529999999999, + 0.5171749999999999, + 0.358772, + 0.015945, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.110244, + 0.328564, + 0.504842, + 0.299254, + 0.673755, + 0.679768, + 0.633096, + 0.532873, + 0.299978, + 0.157957, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.118618, + 0.341825, + 0.5177039999999999, + 0.633687, + 0.694293, + 0.696429, + 0.645895, + 0.541791, + 0.38344799999999996, + 0.16831800000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.055966, + 0.347346, + 0.5123540000000001, + 0.614775, + 0.668671, + 0.66964, + 0.6170990000000001, + 0.517404, + 0.365716, + 0.1628, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.122723, + 0.33569, + 0.502521, + 0.609291, + 0.6653830000000001, + 0.6698500000000001, + 0.621625, + 0.521982, + 0.369787, + 0.162665, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.123127, + 0.338734, + 0.507713, + 0.617544, + 0.6720119999999999, + 0.671558, + 0.6212880000000001, + 0.5191180000000001, + 0.31151100000000004, + 0.053357, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052573, + 0.227932, + 0.30947800000000003, + 0.40543799999999997, + 0.355527, + 0.22976, + 0.418706, + 0.401428, + 0.290085, + 0.125098, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030052, + 0.023899999999999998, + 0.031553, + 0.10711, + 0.527266, + 0.441151, + 0.5294500000000001, + 0.379682, + 0.17224, + 0.003104, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.13495400000000002, + 0.349676, + 0.510934, + 0.615754, + 0.672307, + 0.6774249999999999, + 0.632533, + 0.5383150000000001, + 0.385633, + 0.179666, + 0.003904, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.133584, + 0.34202899999999997, + 0.494431, + 0.595623, + 0.6588440000000001, + 0.670895, + 0.6317269999999999, + 0.5395890000000001, + 0.39056, + 0.183342, + 0.0050279999999999995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.135927, + 0.138305, + 0.141706, + 0.100103, + 0.45676, + 0.537517, + 0.490485, + 0.379, + 0.282707, + 0.124977, + 0.002519, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.157182, + 0.39447699999999997, + 0.571219, + 0.6866, + 0.7496090000000001, + 0.7556, + 0.70663, + 0.600432, + 0.43700900000000004, + 0.206917, + 0.008874, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.159547, + 0.387934, + 0.553624, + 0.657882, + 0.699131, + 0.6884629999999999, + 0.631644, + 0.542259, + 0.405862, + 0.19830099999999998, + 0.00926, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.15486000000000003, + 0.374213, + 0.543337, + 0.658105, + 0.717752, + 0.721236, + 0.5200309999999999, + 0.118714, + 0.03814, + 0.060388, + 0.008919999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.15516999999999997, + 0.374505, + 0.5353519999999999, + 0.6456989999999999, + 0.705025, + 0.7106079999999999, + 0.662566, + 0.56483, + 0.413461, + 0.198819, + 0.010156, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005118, + 0.396708, + 0.572284, + 0.556077, + 0.577016, + 0.75547, + 0.704306, + 0.597847, + 0.048753, + 0.057662, + 0.003065, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.177535, + 0.412158, + 0.58366, + 0.6958, + 0.756462, + 0.760168, + 0.71075, + 0.605949, + 0.44654000000000005, + 0.008179, + 0.010734, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030795000000000003, + 0.259217, + 0.23462, + 0.322512, + 0.461189, + 0.080301, + 0.445406, + 0.286831, + 0.092908, + 0.113111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.069318, + 0.24738200000000002, + 0.325633, + 0.41318900000000003, + 0.517983, + 0.44802800000000004, + 0.41850099999999996, + 0.295938, + 0.202648, + 0.088953, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0012909999999999998, + 0.09683499999999999, + 0.251491, + 0.398411, + 0.5504049999999999, + 0.5691219999999999, + 0.543, + 0.6053160000000001, + 0.452526, + 0.269584, + 0.111288, + 0.005171, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006144, + 0.177758, + 0.39155, + 0.402166, + 0.531193, + 0.569882, + 0.589491, + 0.455673, + 0.395069, + 0.406826, + 0.203746, + 0.016051, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007905, + 0.184586, + 0.394318, + 0.534432, + 0.632212, + 0.476845, + 0.690689, + 0.648095, + 0.462375, + 0.40652699999999997, + 0.117973, + 0.016797, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003424, + 0.104625, + 0.250387, + 0.33493, + 0.638423, + 0.690736, + 0.564935, + 0.656146, + 0.556631, + 0.407584, + 0.20638399999999998, + 0.018708, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009958, + 0.19759800000000002, + 0.419371, + 0.576944, + 0.565112, + 0.599621, + 0.5453640000000001, + 0.5308630000000001, + 0.492223, + 0.345253, + 0.221903, + 0.008977, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012955, + 0.21387299999999998, + 0.43934300000000004, + 0.599375, + 0.70153, + 0.7471939999999999, + 0.740663, + 0.6875330000000001, + 0.5877169999999999, + 0.436877, + 0.182532, + 0.018968, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008298, + 0.163119, + 0.421695, + 0.572865, + 0.6701459999999999, + 0.708371, + 0.6888529999999999, + 0.6266649999999999, + 0.544385, + 0.32863, + 0.175871, + 0.02361, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015291, + 0.209602, + 0.32827100000000003, + 0.571808, + 0.673644, + 0.722773, + 0.7194940000000001, + 0.671988, + 0.570326, + 0.42275, + 0.218978, + 0.027053, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017005, + 0.14236000000000001, + 0.30988600000000005, + 0.5986480000000001, + 0.581332, + 0.571936, + 0.620871, + 0.520115, + 0.453101, + 0.295776, + 0.171549, + 0.022775, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020716000000000002, + 0.222038, + 0.440744, + 0.597726, + 0.702284, + 0.7506849999999999, + 0.746171, + 0.6891889999999999, + 0.586337, + 0.435887, + 0.22781200000000001, + 0.031432, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023548, + 0.222624, + 0.436303, + 0.5883160000000001, + 0.691258, + 0.741501, + 0.743193, + 0.691493, + 0.588292, + 0.439447, + 0.232567, + 0.033536, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028154, + 0.23184200000000002, + 0.441818, + 0.5843440000000001, + 0.67253, + 0.7170230000000001, + 0.715776, + 0.6719360000000001, + 0.579322, + 0.434553, + 0.23178200000000002, + 0.034383000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03032, + 0.234348, + 0.45109699999999997, + 0.602428, + 0.706098, + 0.752413, + 0.744544, + 0.692391, + 0.5860789999999999, + 0.436076, + 0.232815, + 0.035353, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.032142000000000004, + 0.226786, + 0.429745, + 0.559917, + 0.650331, + 0.685116, + 0.699664, + 0.663322, + 0.5753659999999999, + 0.43664400000000003, + 0.23805500000000002, + 0.037380000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03741, + 0.249372, + 0.465603, + 0.6171760000000001, + 0.721192, + 0.772442, + 0.7699969999999999, + 0.71634, + 0.6148429999999999, + 0.41246499999999997, + 0.184438, + 0.032187, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041436999999999995, + 0.258249, + 0.479285, + 0.633405, + 0.7324039999999999, + 0.77564, + 0.764101, + 0.7046720000000001, + 0.60539, + 0.45637900000000003, + 0.251317, + 0.042522, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043442, + 0.261204, + 0.479028, + 0.628995, + 0.727423, + 0.7704249999999999, + 0.7588680000000001, + 0.695432, + 0.590086, + 0.44477, + 0.247013, + 0.043025, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023710000000000002, + 0.156916, + 0.290146, + 0.552496, + 0.615418, + 0.594812, + 0.589144, + 0.557578, + 0.423031, + 0.437151, + 0.241738, + 0.042901, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.046208, + 0.248043, + 0.44692200000000004, + 0.588581, + 0.682535, + 0.731596, + 0.732162, + 0.685685, + 0.585053, + 0.43715699999999996, + 0.236922, + 0.042259, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.048606, + 0.244159, + 0.438972, + 0.571936, + 0.645571, + 0.6850890000000001, + 0.701557, + 0.670985, + 0.583451, + 0.44072100000000003, + 0.24191300000000002, + 0.044289, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052875, + 0.254266, + 0.3458, + 0.449639, + 0.6412279999999999, + 0.609991, + 0.596832, + 0.537481, + 0.495557, + 0.42534500000000003, + 0.179044, + 0.035669, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.05232, + 0.24854099999999998, + 0.341986, + 0.518261, + 0.686274, + 0.725561, + 0.714306, + 0.659125, + 0.420927, + 0.37704899999999997, + 0.185391, + 0.044886, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.055176, + 0.25230199999999997, + 0.44215, + 0.581354, + 0.693191, + 0.745133, + 0.746006, + 0.613351, + 0.5890650000000001, + 0.444975, + 0.24378, + 0.047523, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.062491, + 0.274924, + 0.48180900000000004, + 0.633382, + 0.737687, + 0.7884629999999999, + 0.188622, + 0.456774, + 0.45382, + 0.29539, + 0.114509, + 0.050733, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.064452, + 0.27839800000000003, + 0.481527, + 0.625073, + 0.7130850000000001, + 0.7543540000000001, + 0.759017, + 0.709175, + 0.607936, + 0.457104, + 0.12157899999999999, + 0.051923000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06675, + 0.27018000000000003, + 0.45982799999999996, + 0.5907340000000001, + 0.6726, + 0.626512, + 0.625633, + 0.57292, + 0.52491, + 0.426621, + 0.238881, + 0.051368000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06825400000000001, + 0.166576, + 0.337752, + 0.585789, + 0.692699, + 0.7125969999999999, + 0.5616319999999999, + 0.5876269999999999, + 0.5863590000000001, + 0.410388, + 0.17171899999999998, + 0.037293, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08026699999999999, + 0.311736, + 0.519514, + 0.66683, + 0.763806, + 0.8092659999999999, + 0.80059, + 0.740795, + 0.636042, + 0.481125, + 0.272969, + 0.05887, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.078956, + 0.29339, + 0.49027699999999996, + 0.6343759999999999, + 0.734832, + 0.7843730000000001, + 0.782467, + 0.735336, + 0.631993, + 0.477341, + 0.004889999999999999, + 0.0024980000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08752800000000001, + 0.32083999999999996, + 0.531154, + 0.680622, + 0.780645, + 0.8288110000000001, + 0.818589, + 0.760168, + 0.648649, + 0.491788, + 0.278853, + 0.062253, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.089488, + 0.315118, + 0.513361, + 0.654596, + 0.742654, + 0.778299, + 0.7636989999999999, + 0.593854, + 0.6107809999999999, + 0.46488, + 0.268236, + 0.062068, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08800100000000001, + 0.296363, + 0.401084, + 0.490665, + 0.657942, + 0.707991, + 0.720861, + 0.683225, + 0.594764, + 0.452683, + 0.26132, + 0.061418999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09269, + 0.30482299999999996, + 0.339094, + 0.5310940000000001, + 0.7175549999999999, + 0.768336, + 0.7704589999999999, + 0.721499, + 0.622015, + 0.474979, + 0.27276100000000003, + 0.065489, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.099105, + 0.324137, + 0.527339, + 0.6756449999999999, + 0.768229, + 0.813423, + 0.8105209999999999, + 0.754867, + 0.647179, + 0.30854899999999996, + 0.2767, + 0.06858, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.105159, + 0.33068200000000003, + 0.532682, + 0.6793899999999999, + 0.778357, + 0.817264, + 0.807366, + 0.746788, + 0.638291, + 0.48389499999999996, + 0.277932, + 0.070545, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10826300000000001, + 0.33305599999999996, + 0.526687, + 0.664145, + 0.7474729999999999, + 0.7780739999999999, + 0.7610030000000001, + 0.705448, + 0.611265, + 0.473163, + 0.277534, + 0.070842, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07944, + 0.31741800000000003, + 0.495967, + 0.629851, + 0.720111, + 0.7658769999999999, + 0.761985, + 0.7114, + 0.609758, + 0.46101400000000003, + 0.271666, + 0.069745, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.109413, + 0.320778, + 0.500403, + 0.637115, + 0.7269450000000001, + 0.7744460000000001, + 0.775124, + 0.726168, + 0.621904, + 0.46916800000000003, + 0.247685, + 0.06397, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.116779, + 0.33581599999999995, + 0.5215660000000001, + 0.657805, + 0.753876, + 0.800246, + 0.799304, + 0.743024, + 0.638557, + 0.487832, + 0.287506, + 0.074242, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00039600000000000003, + 0.33508499999999997, + 0.315492, + 0.6711609999999999, + 0.15106299999999998, + 0.433596, + 0.8086810000000001, + 0.751201, + 0.5493049999999999, + 0.339786, + 0.061509, + 0.0025710000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.120556, + 0.33857, + 0.315758, + 0.669653, + 0.7632279999999999, + 0.8055739999999999, + 0.679415, + 0.735764, + 0.375935, + 0.190462, + 0.16362200000000002, + 0.036721, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00040100000000000004, + 0.33282, + 0.5311130000000001, + 0.16630899999999998, + 0.020974, + 0.067363, + 0.031985, + 0.12269100000000001, + 0.12139, + 0.221413, + 0.079731, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.085728, + 0.36663, + 0.56172, + 0.7031459999999999, + 0.788147, + 0.827765, + 0.814667, + 0.752943, + 0.645499, + 0.496529, + 0.294537, + 0.07916500000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0019850000000000002, + 0.12825299999999998, + 0.344555, + 0.521257, + 0.642079, + 0.704152, + 0.726666, + 0.734059, + 0.6994049999999999, + 0.6122089999999999, + 0.475781, + 0.282342, + 0.078566, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0024860000000000004, + 0.129666, + 0.341979, + 0.514204, + 0.637827, + 0.714459, + 0.7427659999999999, + 0.725581, + 0.682313, + 0.5966330000000001, + 0.462808, + 0.278949, + 0.078737, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002931, + 0.130802, + 0.341043, + 0.5051410000000001, + 0.61624, + 0.680727, + 0.714862, + 0.7262430000000001, + 0.693217, + 0.604402, + 0.466887, + 0.28166399999999997, + 0.078515, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005351, + 0.103737, + 0.340779, + 0.512291, + 0.533926, + 0.603131, + 0.750169, + 0.741364, + 0.6948049999999999, + 0.6015539999999999, + 0.464293, + 0.222612, + 0.07900700000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0048200000000000005, + 0.136212, + 0.348911, + 0.52075, + 0.638338, + 0.7057749999999999, + 0.728272, + 0.7036359999999999, + 0.64238, + 0.555282, + 0.433651, + 0.25991000000000003, + 0.077809, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0039169999999999995, + 0.132902, + 0.327289, + 0.49943099999999996, + 0.623662, + 0.714466, + 0.7379819999999999, + 0.7120019999999999, + 0.645931, + 0.547905, + 0.434427, + 0.269776, + 0.078567, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004395, + 0.140253, + 0.346389, + 0.506982, + 0.620054, + 0.6866369999999999, + 0.7093189999999999, + 0.700067, + 0.657883, + 0.5763400000000001, + 0.449305, + 0.276812, + 0.08149200000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0044800000000000005, + 0.14174799999999999, + 0.340475, + 0.49417500000000003, + 0.6169669999999999, + 0.705382, + 0.744146, + 0.741552, + 0.6948869999999999, + 0.6003229999999999, + 0.46051299999999995, + 0.284065, + 0.084875, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005914, + 0.14931999999999998, + 0.358197, + 0.526503, + 0.647513, + 0.730099, + 0.769931, + 0.762496, + 0.722365, + 0.624736, + 0.484547, + 0.299467, + 0.090544, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008154999999999999, + 0.08208700000000001, + 0.35286399999999996, + 0.503592, + 0.648299, + 0.626173, + 0.383484, + 0.446698, + 0.475339, + 0.178368, + 0.163679, + 0.104948, + 0.027759, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09802899999999999, + 0.259078, + 0.32610500000000003, + 0.381897, + 0.189616, + 0.476332, + 0.603183, + 0.537755, + 0.324527, + 0.35591500000000004, + 0.215447, + 0.08920499999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008484, + 0.155226, + 0.365468, + 0.537476, + 0.66938, + 0.755377, + 0.7961739999999999, + 0.78983, + 0.380897, + 0.472947, + 0.205452, + 0.120952, + 0.021072, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010284000000000001, + 0.16378600000000001, + 0.379092, + 0.549883, + 0.674282, + 0.7544270000000001, + 0.784396, + 0.763225, + 0.704767, + 0.604391, + 0.470884, + 0.28860800000000003, + 0.092624, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011672, + 0.16034, + 0.368438, + 0.539048, + 0.6661180000000001, + 0.7510399999999999, + 0.771501, + 0.7412880000000001, + 0.676354, + 0.577233, + 0.45210300000000003, + 0.28647500000000004, + 0.093061, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013548, + 0.162237, + 0.36579, + 0.53099, + 0.649633, + 0.718287, + 0.735898, + 0.709253, + 0.6583920000000001, + 0.574806, + 0.452233, + 0.278528, + 0.09145099999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014098000000000001, + 0.16071100000000002, + 0.355671, + 0.501487, + 0.6196309999999999, + 0.7067129999999999, + 0.748565, + 0.746015, + 0.698871, + 0.602509, + 0.463026, + 0.299421, + 0.096711, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014199, + 0.168587, + 0.37761399999999995, + 0.541717, + 0.658953, + 0.730346, + 0.7464299999999999, + 0.709284, + 0.651704, + 0.587295, + 0.465312, + 0.29039499999999996, + 0.095122, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015702999999999998, + 0.16558799999999999, + 0.367365, + 0.526586, + 0.6380309999999999, + 0.7057559999999999, + 0.7220610000000001, + 0.6947129999999999, + 0.65732, + 0.5859650000000001, + 0.460868, + 0.285677, + 0.094719, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015663, + 0.160244, + 0.360363, + 0.518244, + 0.630502, + 0.7020270000000001, + 0.721552, + 0.704256, + 0.647636, + 0.566264, + 0.443056, + 0.27703300000000003, + 0.094347, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017818, + 0.161547, + 0.348586, + 0.48762900000000003, + 0.594683, + 0.6775890000000001, + 0.717635, + 0.718139, + 0.674953, + 0.588174, + 0.45766199999999996, + 0.28566199999999997, + 0.09751699999999999, + 0.000884, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019586, + 0.171746, + 0.371196, + 0.505783, + 0.570112, + 0.6657609999999999, + 0.666184, + 0.766402, + 0.7146330000000001, + 0.5055149999999999, + 0.42571800000000004, + 0.264512, + 0.09479800000000001, + 0.001592, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023765, + 0.168226, + 0.314747, + 0.48953199999999997, + 0.6566609999999999, + 0.733024, + 0.775652, + 0.294155, + 0.34824099999999997, + 0.638282, + 0.498584, + 0.22563, + 0.111778, + 0.001849, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027780000000000003, + 0.17932900000000002, + 0.384343, + 0.281111, + 0.682115, + 0.768111, + 0.807403, + 0.712447, + 0.364597, + 0.082512, + 0.42072000000000004, + 0.228365, + 0.110783, + 0.002996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024001, + 0.187811, + 0.39814499999999997, + 0.563, + 0.491871, + 0.760876, + 0.787202, + 0.770135, + 0.511757, + 0.503337, + 0.470674, + 0.294127, + 0.104197, + 0.00276, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025634, + 0.17385599999999998, + 0.360719, + 0.511978, + 0.628001, + 0.7070660000000001, + 0.749035, + 0.745674, + 0.699461, + 0.60202, + 0.46660700000000005, + 0.290762, + 0.106836, + 0.002242, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030077000000000003, + 0.177895, + 0.368394, + 0.527759, + 0.65099, + 0.739336, + 0.78059, + 0.774771, + 0.7191230000000001, + 0.624389, + 0.48478, + 0.304426, + 0.10920099999999999, + 0.003985, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02982, + 0.182881, + 0.377786, + 0.532938, + 0.655054, + 0.738601, + 0.777452, + 0.770897, + 0.721355, + 0.6283719999999999, + 0.491968, + 0.31301, + 0.112516, + 0.0045780000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027966, + 0.188729, + 0.390241, + 0.549544, + 0.669653, + 0.7602380000000001, + 0.7978310000000001, + 0.78787, + 0.734248, + 0.637231, + 0.498815, + 0.316668, + 0.114202, + 0.0031269999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.029353, + 0.209994, + 0.429993, + 0.5952569999999999, + 0.712356, + 0.7816649999999999, + 0.811209, + 0.794807, + 0.735446, + 0.643344, + 0.506985, + 0.325111, + 0.120192, + 0.004144999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.032761000000000005, + 0.197406, + 0.405572, + 0.565692, + 0.6842050000000001, + 0.762223, + 0.798749, + 0.7916799999999999, + 0.7388790000000001, + 0.643138, + 0.5050520000000001, + 0.322899, + 0.120985, + 0.0054, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036361, + 0.193815, + 0.398789, + 0.564962, + 0.693448, + 0.7761849999999999, + 0.812235, + 0.712507, + 0.167505, + 0.48988299999999996, + 0.503308, + 0.317582, + 0.11928, + 0.005496, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035205, + 0.19121000000000002, + 0.389172, + 0.548788, + 0.6688390000000001, + 0.747393, + 0.78587, + 0.7790860000000001, + 0.7334189999999999, + 0.637138, + 0.406315, + 0.27494, + 0.108342, + 0.007724, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034149, + 0.190958, + 0.391731, + 0.559068, + 0.688788, + 0.774586, + 0.81349, + 0.807757, + 0.750432, + 0.6541119999999999, + 0.514418, + 0.331288, + 0.12529099999999999, + 0.005084, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031354, + 0.199011, + 0.403476, + 0.558457, + 0.664685, + 0.7215069999999999, + 0.742147, + 0.728673, + 0.6881799999999999, + 0.6027830000000001, + 0.47908300000000004, + 0.312613, + 0.120687, + 0.004825, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031899000000000004, + 0.201569, + 0.40648700000000004, + 0.560793, + 0.672029, + 0.739583, + 0.761017, + 0.7408250000000001, + 0.682249, + 0.585124, + 0.467391, + 0.312076, + 0.121537, + 0.00521, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.032219000000000005, + 0.196378, + 0.39269400000000004, + 0.5413490000000001, + 0.652509, + 0.713539, + 0.7286950000000001, + 0.7007380000000001, + 0.6407999999999999, + 0.5752970000000001, + 0.46989600000000004, + 0.308466, + 0.120066, + 0.005534, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031833, + 0.191333, + 0.37551999999999996, + 0.514594, + 0.6312989999999999, + 0.711431, + 0.751192, + 0.7492859999999999, + 0.703858, + 0.614596, + 0.48463799999999996, + 0.314851, + 0.12098600000000001, + 0.004995, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031925, + 0.197052, + 0.38814800000000005, + 0.524762, + 0.626928, + 0.692374, + 0.716143, + 0.7076140000000001, + 0.661907, + 0.584851, + 0.469053, + 0.306459, + 0.121005, + 0.005863, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033595, + 0.18772, + 0.371257, + 0.515101, + 0.626413, + 0.7079650000000001, + 0.7441380000000001, + 0.7432519999999999, + 0.698558, + 0.611916, + 0.485512, + 0.319841, + 0.126107, + 0.005994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.03284, + 0.19814400000000001, + 0.290743, + 0.547235, + 0.668337, + 0.5950030000000001, + 0.781571, + 0.7700779999999999, + 0.720268, + 0.63188, + 0.49784300000000004, + 0.326458, + 0.128452, + 0.0070599999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037232999999999995, + 0.203264, + 0.40596699999999997, + 0.5646939999999999, + 0.6863239999999999, + 0.766539, + 0.802354, + 0.79383, + 0.7449990000000001, + 0.6507580000000001, + 0.5147419999999999, + 0.33799, + 0.13438, + 0.007757, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041719, + 0.205837, + 0.403714, + 0.562225, + 0.68536, + 0.770467, + 0.8036190000000001, + 0.794658, + 0.741831, + 0.646501, + 0.511359, + 0.334588, + 0.1348, + 0.009633, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04112, + 0.200904, + 0.39056799999999997, + 0.53426, + 0.642923, + 0.719899, + 0.747913, + 0.737051, + 0.695397, + 0.611998, + 0.490318, + 0.326181, + 0.13218000000000002, + 0.009722, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037342, + 0.199108, + 0.386202, + 0.529931, + 0.63807, + 0.70993, + 0.734398, + 0.719234, + 0.675148, + 0.594846, + 0.474974, + 0.313772, + 0.129152, + 0.009791000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038433, + 0.196039, + 0.375925, + 0.517062, + 0.630891, + 0.7089249999999999, + 0.743894, + 0.738548, + 0.55279, + 0.606056, + 0.479606, + 0.285516, + 0.126634, + 0.011359, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036768, + 0.15032900000000002, + 0.38269600000000004, + 0.525587, + 0.633947, + 0.710306, + 0.7484339999999999, + 0.74164, + 0.696926, + 0.611206, + 0.48445900000000003, + 0.322266, + 0.133146, + 0.011651, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035557000000000005, + 0.140129, + 0.275218, + 0.281443, + 0.555212, + 0.6315449999999999, + 0.538423, + 0.37727999999999995, + 0.13103, + 0.4337, + 0.204493, + 0.322255, + 0.12813999999999998, + 0.013416, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036653, + 0.182499, + 0.368115, + 0.527369, + 0.6296029999999999, + 0.699947, + 0.7440410000000001, + 0.678689, + 0.5085149999999999, + 0.525531, + 0.44005099999999997, + 0.255466, + 0.109786, + 0.014183999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036136, + 0.14699500000000001, + 0.288489, + 0.24065799999999998, + 0.49988900000000003, + 0.578037, + 0.650356, + 0.63781, + 0.596899, + 0.30871699999999996, + 0.27147000000000004, + 0.195782, + 0.079908, + 0.01413, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038274, + 0.18654300000000001, + 0.370752, + 0.51515, + 0.626788, + 0.691193, + 0.7007329999999999, + 0.6703049999999999, + 0.622845, + 0.5563400000000001, + 0.45074400000000003, + 0.298825, + 0.13105799999999998, + 0.014851000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038943, + 0.189664, + 0.370415, + 0.510782, + 0.621888, + 0.698824, + 0.73695, + 0.736352, + 0.69389, + 0.608862, + 0.48343, + 0.32593700000000003, + 0.138957, + 0.015052, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025207, + 0.086544, + 0.2025, + 0.14699500000000001, + 0.178921, + 0.595679, + 0.511918, + 0.746797, + 0.712818, + 0.496055, + 0.49797, + 0.328073, + 0.142975, + 0.016474, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041927, + 0.198898, + 0.393727, + 0.550537, + 0.6721630000000001, + 0.752691, + 0.791807, + 0.78639, + 0.738726, + 0.645733, + 0.5130410000000001, + 0.34267200000000003, + 0.146853, + 0.017783999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.042822000000000006, + 0.218983, + 0.42624900000000004, + 0.585924, + 0.714679, + 0.796581, + 0.833333, + 0.825641, + 0.768677, + 0.673288, + 0.537254, + 0.365889, + 0.158408, + 0.016905999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.04112, + 0.222062, + 0.43511500000000003, + 0.5996760000000001, + 0.723688, + 0.800942, + 0.823935, + 0.770372, + 0.7555660000000001, + 0.6604990000000001, + 0.5272519999999999, + 0.356379, + 0.154811, + 0.016048, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.039738, + 0.211647, + 0.410432, + 0.561813, + 0.668283, + 0.731834, + 0.7558980000000001, + 0.7365499999999999, + 0.680978, + 0.5893010000000001, + 0.475823, + 0.331582, + 0.146741, + 0.01765, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040382, + 0.205578, + 0.396413, + 0.54189, + 0.649263, + 0.7105090000000001, + 0.7303, + 0.715977, + 0.676191, + 0.603606, + 0.488602, + 0.335844, + 0.148165, + 0.017107, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038153, + 0.195684, + 0.380589, + 0.527771, + 0.645433, + 0.726718, + 0.766889, + 0.765923, + 0.72449, + 0.6376000000000001, + 0.510811, + 0.348852, + 0.153234, + 0.017542000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040301000000000003, + 0.21276499999999998, + 0.397152, + 0.5613859999999999, + 0.657985, + 0.736112, + 0.799551, + 0.793873, + 0.743774, + 0.653672, + 0.52134, + 0.354842, + 0.15535, + 0.019489, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041442, + 0.20097900000000002, + 0.40434800000000004, + 0.555787, + 0.6736019999999999, + 0.7528590000000001, + 0.7892509999999999, + 0.783377, + 0.734248, + 0.642808, + 0.512617, + 0.349675, + 0.15282099999999998, + 0.018852, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040202, + 0.20501499999999998, + 0.39755, + 0.540271, + 0.639068, + 0.692349, + 0.700532, + 0.688028, + 0.6645460000000001, + 0.602483, + 0.488937, + 0.33738999999999997, + 0.149673, + 0.020681, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040042, + 0.197246, + 0.37905399999999995, + 0.5143049999999999, + 0.6287820000000001, + 0.707105, + 0.7448049999999999, + 0.743107, + 0.7003659999999999, + 0.616591, + 0.486174, + 0.33345400000000003, + 0.143232, + 0.018938, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038765999999999995, + 0.197042, + 0.387881, + 0.538791, + 0.657811, + 0.7370359999999999, + 0.774551, + 0.770784, + 0.7249329999999999, + 0.63695, + 0.509798, + 0.34986900000000004, + 0.154938, + 0.019857, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041406, + 0.19886099999999998, + 0.388235, + 0.535121, + 0.6438630000000001, + 0.705975, + 0.725391, + 0.714668, + 0.678412, + 0.606443, + 0.491455, + 0.340374, + 0.152591, + 0.021883, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.040060000000000005, + 0.19684100000000002, + 0.387821, + 0.5342619999999999, + 0.637538, + 0.692408, + 0.7136520000000001, + 0.7049460000000001, + 0.6715800000000001, + 0.602635, + 0.4875, + 0.337202, + 0.15294999999999997, + 0.021945, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043266, + 0.192819, + 0.37493400000000005, + 0.514085, + 0.619599, + 0.692432, + 0.731464, + 0.731559, + 0.690725, + 0.602467, + 0.48736399999999996, + 0.33621100000000004, + 0.15224100000000002, + 0.021474, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.039131, + 0.191453, + 0.37524, + 0.5184489999999999, + 0.624524, + 0.693374, + 0.721629, + 0.719843, + 0.684012, + 0.6048920000000001, + 0.486957, + 0.333826, + 0.151323, + 0.020812999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037859000000000004, + 0.19366999999999998, + 0.381596, + 0.526567, + 0.638955, + 0.714146, + 0.751456, + 0.748071, + 0.7045220000000001, + 0.620471, + 0.498634, + 0.343065, + 0.154632, + 0.020844, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035847000000000004, + 0.19053299999999998, + 0.376516, + 0.517941, + 0.626421, + 0.7018220000000001, + 0.739202, + 0.738702, + 0.6984400000000001, + 0.61653, + 0.495889, + 0.343176, + 0.155891, + 0.020914000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034868, + 0.189607, + 0.373081, + 0.512719, + 0.619819, + 0.676603, + 0.7242970000000001, + 0.730967, + 0.692896, + 0.613929, + 0.48014, + 0.328728, + 0.152944, + 0.019939, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033680999999999996, + 0.16467400000000001, + 0.319664, + 0.461029, + 0.618574, + 0.6915159999999999, + 0.7179, + 0.716426, + 0.605262, + 0.549984, + 0.431166, + 0.26499, + 0.14321199999999998, + 0.021338, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033055, + 0.158804, + 0.333644, + 0.475215, + 0.588523, + 0.71125, + 0.725481, + 0.70569, + 0.695136, + 0.6300159999999999, + 0.506945, + 0.351519, + 0.159383, + 0.020635999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033642000000000005, + 0.180592, + 0.35109199999999996, + 0.478918, + 0.5865560000000001, + 0.660199, + 0.6980270000000001, + 0.696112, + 0.655494, + 0.37572300000000003, + 0.231172, + 0.316745, + 0.14757900000000002, + 0.022646, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033409999999999995, + 0.178671, + 0.357849, + 0.50072, + 0.609645, + 0.686665, + 0.724547, + 0.725538, + 0.685388, + 0.605172, + 0.485137, + 0.33492, + 0.153879, + 0.022616, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.034295, + 0.18945099999999998, + 0.3822, + 0.536862, + 0.659258, + 0.744155, + 0.783871, + 0.7787029999999999, + 0.7316630000000001, + 0.6435420000000001, + 0.515283, + 0.35550099999999996, + 0.161887, + 0.021529, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037520000000000005, + 0.197154, + 0.39357400000000003, + 0.5398099999999999, + 0.642197, + 0.699843, + 0.730161, + 0.732009, + 0.6996359999999999, + 0.627283, + 0.509817, + 0.35464999999999997, + 0.161286, + 0.02129, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031948, + 0.188439, + 0.37681, + 0.513817, + 0.614227, + 0.689768, + 0.733209, + 0.738884, + 0.702857, + 0.624936, + 0.505193, + 0.35572699999999996, + 0.162479, + 0.017716000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028822, + 0.195447, + 0.393019, + 0.5397329999999999, + 0.645183, + 0.704693, + 0.73956, + 0.739881, + 0.7017279999999999, + 0.6262190000000001, + 0.50915, + 0.355665, + 0.16354400000000002, + 0.018168, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028170999999999998, + 0.195689, + 0.39605399999999996, + 0.546616, + 0.65837, + 0.729157, + 0.766378, + 0.763892, + 0.722227, + 0.640786, + 0.51985, + 0.362557, + 0.165882, + 0.017826, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027849, + 0.193765, + 0.39143700000000003, + 0.5340499999999999, + 0.627211, + 0.6825249999999999, + 0.711657, + 0.7111559999999999, + 0.676004, + 0.6043440000000001, + 0.494711, + 0.346157, + 0.15918100000000002, + 0.016695, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.026806, + 0.187631, + 0.374859, + 0.503897, + 0.586672, + 0.656679, + 0.5724859999999999, + 0.700259, + 0.640009, + 0.5685119999999999, + 0.45714499999999997, + 0.325433, + 0.149855, + 0.021518000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.029771000000000002, + 0.167203, + 0.34266800000000003, + 0.480284, + 0.585948, + 0.657707, + 0.692002, + 0.689659, + 0.587314, + 0.587776, + 0.473223, + 0.323367, + 0.147375, + 0.021834, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033407, + 0.159736, + 0.335692, + 0.47524099999999997, + 0.5831069999999999, + 0.658111, + 0.699041, + 0.61314, + 0.583372, + 0.585461, + 0.470721, + 0.322364, + 0.14804900000000001, + 0.023818000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028475, + 0.169211, + 0.356615, + 0.506901, + 0.622581, + 0.7033579999999999, + 0.742394, + 0.7405900000000001, + 0.704444, + 0.6230289999999999, + 0.501395, + 0.346339, + 0.156408, + 0.017728999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024974, + 0.175667, + 0.368088, + 0.521645, + 0.640152, + 0.719812, + 0.7597849999999999, + 0.758857, + 0.716019, + 0.6316, + 0.509522, + 0.356269, + 0.161958, + 0.017498, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0265, + 0.171648, + 0.358034, + 0.504274, + 0.61488, + 0.6888540000000001, + 0.7294039999999999, + 0.7289439999999999, + 0.693065, + 0.610286, + 0.48495499999999997, + 0.332512, + 0.152704, + 0.023977000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022515999999999998, + 0.084023, + 0.277282, + 0.204399, + 0.533362, + 0.5530109999999999, + 0.496407, + 0.536986, + 0.506528, + 0.290825, + 0.377672, + 0.273443, + 0.10129200000000001, + 0.020077, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.029623999999999998, + 0.169984, + 0.35880900000000004, + 0.519102, + 0.644633, + 0.735249, + 0.774864, + 0.7689239999999999, + 0.7279500000000001, + 0.646058, + 0.52147, + 0.361056, + 0.163673, + 0.016846, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022645, + 0.174845, + 0.371355, + 0.523745, + 0.636038, + 0.711097, + 0.749275, + 0.747565, + 0.709711, + 0.631049, + 0.510715, + 0.3525, + 0.15849000000000002, + 0.015778, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020832999999999997, + 0.17463900000000002, + 0.368286, + 0.5166069999999999, + 0.6230829999999999, + 0.69323, + 0.733054, + 0.730793, + 0.6929460000000001, + 0.614465, + 0.49593400000000004, + 0.341185, + 0.152788, + 0.016417, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.006144, + 0.07465000000000001, + 0.270973, + 0.37614, + 0.463733, + 0.323115, + 0.416686, + 0.418754, + 0.47887799999999997, + 0.5608730000000001, + 0.455164, + 0.325289, + 0.14563900000000002, + 0.017425, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008376, + 0.096971, + 0.333249, + 0.47708300000000003, + 0.5870700000000001, + 0.667234, + 0.705943, + 0.7063740000000001, + 0.6654779999999999, + 0.589662, + 0.472858, + 0.320355, + 0.14424700000000001, + 0.017287, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.020425000000000002, + 0.15854, + 0.34454, + 0.49261900000000003, + 0.607958, + 0.687275, + 0.727647, + 0.726949, + 0.689226, + 0.6100140000000001, + 0.49165499999999995, + 0.338763, + 0.150404, + 0.015352000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018639, + 0.165161, + 0.359976, + 0.511953, + 0.6245689999999999, + 0.700379, + 0.740152, + 0.7385900000000001, + 0.6966950000000001, + 0.616583, + 0.496722, + 0.341349, + 0.15143299999999998, + 0.015276999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017901, + 0.16643799999999997, + 0.363272, + 0.517631, + 0.635094, + 0.713886, + 0.755038, + 0.752393, + 0.7103630000000001, + 0.62615, + 0.502616, + 0.34526100000000004, + 0.151745, + 0.013311, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016861, + 0.16393100000000002, + 0.357118, + 0.510175, + 0.627952, + 0.712211, + 0.755189, + 0.755255, + 0.71515, + 0.633672, + 0.51157, + 0.353733, + 0.15578399999999998, + 0.012785999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016267, + 0.166452, + 0.36075, + 0.5108469999999999, + 0.628792, + 0.711665, + 0.7528210000000001, + 0.7519710000000001, + 0.71325, + 0.6281749999999999, + 0.504735, + 0.348151, + 0.152898, + 0.012986000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016765000000000002, + 0.16118700000000002, + 0.350588, + 0.5028210000000001, + 0.6194550000000001, + 0.6994199999999999, + 0.738958, + 0.7347469999999999, + 0.697543, + 0.6142029999999999, + 0.491095, + 0.334322, + 0.14533000000000001, + 0.013602, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017179, + 0.150042, + 0.332447, + 0.478684, + 0.5913390000000001, + 0.669427, + 0.710054, + 0.706696, + 0.6671119999999999, + 0.585976, + 0.46509500000000004, + 0.315475, + 0.132756, + 0.008747, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002205, + 0.060121, + 0.06674200000000001, + 0.061644, + 0.5719059999999999, + 0.574131, + 0.665625, + 0.057652999999999996, + 0.18019200000000002, + 0.15434, + 0.020325, + 0.11923600000000001, + 0.014959, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016055, + 0.14385499999999998, + 0.32550999999999997, + 0.468585, + 0.5821810000000001, + 0.6652619999999999, + 0.707637, + 0.709312, + 0.671417, + 0.59437, + 0.47650400000000004, + 0.323766, + 0.13886, + 0.012132, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013907, + 0.15060300000000001, + 0.338698, + 0.490125, + 0.6058819999999999, + 0.687158, + 0.7290249999999999, + 0.728403, + 0.692297, + 0.609715, + 0.487755, + 0.326013, + 0.13918799999999998, + 0.011949, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013433, + 0.147872, + 0.33881, + 0.490784, + 0.6050829999999999, + 0.68032, + 0.7208, + 0.723591, + 0.6853440000000001, + 0.60637, + 0.487599, + 0.328384, + 0.139934, + 0.010964, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.01367, + 0.143287, + 0.32917599999999997, + 0.479076, + 0.5934510000000001, + 0.6749120000000001, + 0.715701, + 0.714788, + 0.679074, + 0.5981029999999999, + 0.476885, + 0.319809, + 0.134625, + 0.009939, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013558, + 0.144707, + 0.331373, + 0.48279700000000003, + 0.598018, + 0.67574, + 0.7144149999999999, + 0.714332, + 0.677572, + 0.5981799999999999, + 0.47788099999999994, + 0.31953699999999996, + 0.133824, + 0.00968, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011961000000000001, + 0.142739, + 0.332787, + 0.485333, + 0.5991409999999999, + 0.673432, + 0.713125, + 0.711305, + 0.66795, + 0.5905549999999999, + 0.473401, + 0.31971, + 0.13300399999999998, + 0.008078, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011664999999999998, + 0.142928, + 0.329692, + 0.481033, + 0.594195, + 0.672692, + 0.713345, + 0.713251, + 0.678145, + 0.596621, + 0.47567200000000004, + 0.318065, + 0.131356, + 0.007741, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010717, + 0.141215, + 0.32306999999999997, + 0.472989, + 0.5841989999999999, + 0.663044, + 0.702528, + 0.700881, + 0.658143, + 0.5762480000000001, + 0.455995, + 0.306647, + 0.12728799999999998, + 0.0070739999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.051, + 0.008494, + 0.39469099999999996, + 0.592891, + 0.5977140000000001, + 0.625775, + 0.633501, + 0.666396, + 0.587482, + 0.466099, + 0.312025, + 0.127938, + 0.006742, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.010239000000000002, + 0.136447, + 0.321606, + 0.47143799999999997, + 0.584718, + 0.666158, + 0.711609, + 0.7137279999999999, + 0.673858, + 0.5951799999999999, + 0.474097, + 0.318847, + 0.128992, + 0.005772, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008298, + 0.141035, + 0.331121, + 0.481951, + 0.5919260000000001, + 0.66831, + 0.703824, + 0.704922, + 0.66969, + 0.591263, + 0.470706, + 0.31249099999999996, + 0.124811, + 0.00512, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008267, + 0.13709100000000002, + 0.324084, + 0.47602300000000003, + 0.590712, + 0.6668339999999999, + 0.707945, + 0.705119, + 0.5290860000000001, + 0.582878, + 0.460252, + 0.304499, + 0.12271800000000001, + 0.005093, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008072, + 0.133481, + 0.320299, + 0.47744600000000004, + 0.5994700000000001, + 0.686033, + 0.731494, + 0.7350220000000001, + 0.690578, + 0.6070180000000001, + 0.480834, + 0.321745, + 0.126792, + 0.004812, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.00779, + 0.144517, + 0.34993599999999997, + 0.5198740000000001, + 0.646922, + 0.735993, + 0.777798, + 0.7723669999999999, + 0.727992, + 0.6371749999999999, + 0.504147, + 0.33224400000000004, + 0.128842, + 0.0031720000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005487, + 0.143456, + 0.34610599999999997, + 0.5088360000000001, + 0.6307910000000001, + 0.7117910000000001, + 0.75539, + 0.754596, + 0.7095990000000001, + 0.6220979999999999, + 0.492528, + 0.325678, + 0.125438, + 0.00323, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.005373, + 0.143227, + 0.347498, + 0.507187, + 0.623888, + 0.698751, + 0.743804, + 0.7470289999999999, + 0.7061799999999999, + 0.621328, + 0.49452999999999997, + 0.327817, + 0.12532, + 0.002697, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004726, + 0.140213, + 0.342374, + 0.503129, + 0.623875, + 0.705729, + 0.750364, + 0.7530359999999999, + 0.708913, + 0.623654, + 0.494181, + 0.32613400000000003, + 0.124193, + 0.002797, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004099, + 0.138907, + 0.33822199999999997, + 0.49629399999999996, + 0.6172190000000001, + 0.699663, + 0.744261, + 0.7467849999999999, + 0.7037709999999999, + 0.618878, + 0.49122699999999997, + 0.322232, + 0.12040000000000001, + 0.004202, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004652999999999999, + 0.13662100000000002, + 0.335481, + 0.500767, + 0.628244, + 0.71245, + 0.754878, + 0.750611, + 0.7082430000000001, + 0.6189020000000001, + 0.488597, + 0.318644, + 0.117093, + 0.003629, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004006, + 0.12913999999999998, + 0.322255, + 0.47945299999999996, + 0.598459, + 0.6774779999999999, + 0.715392, + 0.712467, + 0.671119, + 0.583727, + 0.45869600000000005, + 0.29936399999999996, + 0.108293, + 0.0029519999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003899, + 0.12675799999999998, + 0.31815499999999997, + 0.47454399999999997, + 0.587348, + 0.665582, + 0.70674, + 0.706788, + 0.6687759999999999, + 0.585743, + 0.46137599999999995, + 0.296981, + 0.105639, + 0.002359, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003335, + 0.12366200000000001, + 0.312546, + 0.465404, + 0.559199, + 0.5404, + 0.70363, + 0.70052, + 0.5617179999999999, + 0.439291, + 0.400668, + 0.265927, + 0.091641, + 0.001224, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002798, + 0.1184, + 0.31002199999999996, + 0.46475900000000003, + 0.579596, + 0.654808, + 0.694721, + 0.69426, + 0.653168, + 0.570881, + 0.44455700000000004, + 0.27406400000000003, + 0.09713899999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002406, + 0.11888800000000001, + 0.306836, + 0.458847, + 0.5712240000000001, + 0.640745, + 0.679603, + 0.678552, + 0.6374, + 0.555199, + 0.42962, + 0.265231, + 0.092832, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003706, + 0.11653400000000001, + 0.303732, + 0.457692, + 0.5733769999999999, + 0.6570170000000001, + 0.697658, + 0.698473, + 0.658043, + 0.573277, + 0.445885, + 0.278466, + 0.095026, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0037029999999999997, + 0.119132, + 0.310663, + 0.471481, + 0.5915940000000001, + 0.675332, + 0.7174109999999999, + 0.717658, + 0.673609, + 0.586452, + 0.459546, + 0.28980399999999995, + 0.09557500000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004319, + 0.103644, + 0.32169099999999995, + 0.487144, + 0.551172, + 0.69414, + 0.673451, + 0.7319589999999999, + 0.687357, + 0.596832, + 0.466117, + 0.29257299999999997, + 0.094847, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.003241, + 0.125825, + 0.32913600000000004, + 0.491283, + 0.608404, + 0.685315, + 0.726881, + 0.727384, + 0.67992, + 0.592128, + 0.46148, + 0.287145, + 0.090999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002592, + 0.121434, + 0.31897699999999996, + 0.481742, + 0.599483, + 0.674786, + 0.710134, + 0.7068369999999999, + 0.6632129999999999, + 0.575431, + 0.44741699999999995, + 0.275254, + 0.08604300000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.002052, + 0.11815600000000001, + 0.316576, + 0.481294, + 0.60136, + 0.6816319999999999, + 0.719354, + 0.711635, + 0.66908, + 0.577789, + 0.445101, + 0.274327, + 0.08402899999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0021469999999999996, + 0.119984, + 0.325624, + 0.496, + 0.621972, + 0.7033809999999999, + 0.745115, + 0.739527, + 0.690571, + 0.597995, + 0.463714, + 0.285745, + 0.0858, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0015609999999999999, + 0.118184, + 0.31664299999999995, + 0.475954, + 0.59654, + 0.678072, + 0.717777, + 0.713781, + 0.671649, + 0.580697, + 0.448352, + 0.27414499999999997, + 0.080693, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.000907, + 0.10832699999999999, + 0.293983, + 0.45682799999999996, + 0.5807089999999999, + 0.663621, + 0.704661, + 0.703154, + 0.570496, + 0.490773, + 0.372096, + 0.251903, + 0.073857, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.103695, + 0.284952, + 0.414459, + 0.514033, + 0.646885, + 0.600637, + 0.5662229999999999, + 0.5573210000000001, + 0.162833, + 0.100768, + 0.22199100000000002, + 0.071107, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.103206, + 0.29133499999999996, + 0.44874200000000003, + 0.5677380000000001, + 0.652242, + 0.693485, + 0.6906359999999999, + 0.6478160000000001, + 0.5596810000000001, + 0.427318, + 0.255113, + 0.069294, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.105546, + 0.297691, + 0.44755399999999995, + 0.55668, + 0.636774, + 0.678643, + 0.6782229999999999, + 0.636747, + 0.550224, + 0.42310899999999996, + 0.25056, + 0.066012, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.104811, + 0.293671, + 0.43728500000000003, + 0.542678, + 0.613101, + 0.644374, + 0.641531, + 0.605519, + 0.38060000000000005, + 0.248685, + 0.218975, + 0.062952, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041209, + 0.287834, + 0.44327999999999995, + 0.560703, + 0.646821, + 0.688198, + 0.6843769999999999, + 0.319996, + 0.033862, + 0.411325, + 0.061418999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09678, + 0.273964, + 0.42163799999999996, + 0.531984, + 0.616543, + 0.6516109999999999, + 0.649445, + 0.610274, + 0.463975, + 0.349865, + 0.24739, + 0.060881, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10677800000000001, + 0.30363, + 0.457733, + 0.575913, + 0.655412, + 0.697217, + 0.6968300000000001, + 0.651571, + 0.56072, + 0.425363, + 0.244651, + 0.058516, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10578, + 0.305517, + 0.45350599999999996, + 0.5525890000000001, + 0.6343880000000001, + 0.674273, + 0.18954300000000002, + 0.02104, + 0.016468, + 0.41572699999999996, + 0.237429, + 0.055146, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.100547, + 0.294126, + 0.453463, + 0.573006, + 0.651343, + 0.687822, + 0.681296, + 0.24521700000000002, + 0.20402099999999998, + 0.049485, + 0.165898, + 0.053232999999999996, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09804399999999999, + 0.29430700000000004, + 0.44932, + 0.5666599999999999, + 0.64324, + 0.676222, + 0.668314, + 0.620078, + 0.527533, + 0.39703, + 0.220797, + 0.049773000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.095766, + 0.285087, + 0.443277, + 0.555987, + 0.630669, + 0.662021, + 0.653458, + 0.604665, + 0.5159790000000001, + 0.160728, + 0.21544300000000002, + 0.019963, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094664, + 0.283039, + 0.445112, + 0.560492, + 0.642205, + 0.680275, + 0.676956, + 0.6302150000000001, + 0.536471, + 0.40004399999999996, + 0.219795, + 0.04439, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094322, + 0.284843, + 0.44501999999999997, + 0.564142, + 0.646529, + 0.685341, + 0.6824349999999999, + 0.634381, + 0.5359539999999999, + 0.39334800000000003, + 0.21319, + 0.04134, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.100071, + 0.30755200000000005, + 0.484047, + 0.609601, + 0.692317, + 0.728324, + 0.719368, + 0.6709210000000001, + 0.570039, + 0.425938, + 0.228274, + 0.042527, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.100576, + 0.310529, + 0.490254, + 0.617924, + 0.700704, + 0.738758, + 0.725837, + 0.670923, + 0.569414, + 0.423811, + 0.22773400000000002, + 0.040129, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.096688, + 0.296982, + 0.462267, + 0.584386, + 0.6715220000000001, + 0.7120700000000001, + 0.705865, + 0.654162, + 0.55788, + 0.417105, + 0.222715, + 0.037112, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094015, + 0.297892, + 0.463688, + 0.580667, + 0.65659, + 0.683769, + 0.664187, + 0.603245, + 0.507748, + 0.381339, + 0.204911, + 0.032825, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.089437, + 0.288495, + 0.450819, + 0.563432, + 0.6369450000000001, + 0.663785, + 0.646377, + 0.584783, + 0.495367, + 0.371068, + 0.19668, + 0.030812000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.085122, + 0.280087, + 0.443914, + 0.56216, + 0.640024, + 0.6776599999999999, + 0.672249, + 0.617878, + 0.517169, + 0.37389100000000003, + 0.18049, + 0.024440999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.082076, + 0.262995, + 0.430628, + 0.557104, + 0.653967, + 0.690711, + 0.6798630000000001, + 0.6282920000000001, + 0.519812, + 0.36776299999999995, + 0.19318100000000002, + 0.026951, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.093292, + 0.30844099999999997, + 0.49885199999999996, + 0.6368590000000001, + 0.7314550000000001, + 0.770456, + 0.755887, + 0.695492, + 0.581945, + 0.424542, + 0.21530000000000002, + 0.02658, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.097021, + 0.321579, + 0.512035, + 0.650868, + 0.737379, + 0.774154, + 0.7584919999999999, + 0.692058, + 0.580783, + 0.42652999999999996, + 0.214105, + 0.02451, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.094604, + 0.314513, + 0.501854, + 0.631984, + 0.716062, + 0.748725, + 0.72917, + 0.666026, + 0.558239, + 0.407743, + 0.20517, + 0.020307, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.090443, + 0.30183, + 0.47558, + 0.59437, + 0.6673680000000001, + 0.695031, + 0.6782619999999999, + 0.617726, + 0.523592, + 0.386385, + 0.191911, + 0.016558, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.083661, + 0.28184, + 0.462051, + 0.594452, + 0.6847190000000001, + 0.722514, + 0.713658, + 0.6546770000000001, + 0.5496449999999999, + 0.395652, + 0.190338, + 0.013626, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08790600000000001, + 0.302577, + 0.485401, + 0.608275, + 0.6831430000000001, + 0.709656, + 0.68916, + 0.6254829999999999, + 0.5240739999999999, + 0.379986, + 0.185525, + 0.011703, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08412900000000001, + 0.288859, + 0.46193599999999996, + 0.588503, + 0.669823, + 0.706303, + 0.694404, + 0.631456, + 0.524109, + 0.37300599999999995, + 0.174322, + 0.010048999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076842, + 0.26517, + 0.43738499999999997, + 0.572268, + 0.680645, + 0.7228920000000001, + 0.7130230000000001, + 0.652085, + 0.54532, + 0.392127, + 0.183145, + 0.009888999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.084713, + 0.30424799999999996, + 0.495755, + 0.6296470000000001, + 0.7134429999999999, + 0.746826, + 0.728238, + 0.6620940000000001, + 0.54926, + 0.390058, + 0.178299, + 0.008067999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08281699999999999, + 0.297822, + 0.484236, + 0.61248, + 0.6902010000000001, + 0.719336, + 0.69736, + 0.631652, + 0.522306, + 0.371261, + 0.16936400000000001, + 0.00624, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.079842, + 0.293498, + 0.47559199999999996, + 0.600124, + 0.6790470000000001, + 0.7072419999999999, + 0.685289, + 0.619202, + 0.514371, + 0.364967, + 0.164196, + 0.005873000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.073725, + 0.27306400000000003, + 0.44398200000000004, + 0.566296, + 0.650169, + 0.686335, + 0.675346, + 0.621106, + 0.517038, + 0.36465, + 0.160661, + 0.004835, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076723, + 0.28345800000000004, + 0.45745800000000003, + 0.578323, + 0.654049, + 0.68402, + 0.667159, + 0.6094579999999999, + 0.507566, + 0.357259, + 0.156128, + 0.00347, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059387, + 0.245905, + 0.371063, + 0.577198, + 0.5749890000000001, + 0.545766, + 0.563027, + 0.40292700000000004, + 0.200211, + 0.35852, + 0.154666, + 0.002508, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.068218, + 0.263673, + 0.43150900000000003, + 0.547331, + 0.577388, + 0.6052240000000001, + 0.5845009999999999, + 0.504705, + 0.376124, + 0.24774600000000002, + 0.080129, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067448, + 0.26474000000000003, + 0.439631, + 0.501317, + 0.587448, + 0.558698, + 0.356151, + 0.425711, + 0.257269, + 0.24675299999999997, + 0.047415, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.066188, + 0.260146, + 0.423949, + 0.546438, + 0.626352, + 0.662018, + 0.6532720000000001, + 0.594037, + 0.48781599999999997, + 0.333895, + 0.135472, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038423, + 0.232245, + 0.428281, + 0.54857, + 0.628002, + 0.662551, + 0.6523669999999999, + 0.593091, + 0.485763, + 0.3312, + 0.132563, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.062842, + 0.259795, + 0.439276, + 0.564822, + 0.6496430000000001, + 0.68271, + 0.671639, + 0.606659, + 0.493876, + 0.331801, + 0.129773, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.061281999999999996, + 0.26401100000000005, + 0.45386000000000004, + 0.588178, + 0.6725760000000001, + 0.706539, + 0.690717, + 0.625009, + 0.38653899999999997, + 0.245025, + 0.012269, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.054775, + 0.054612, + 0.217751, + 0.598576, + 0.347933, + 0.7161660000000001, + 0.6978, + 0.147157, + 0.207529, + 0.348006, + 0.003243, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.064946, + 0.284012, + 0.480082, + 0.6123999999999999, + 0.692093, + 0.724176, + 0.10127, + 0.227502, + 0.013538999999999999, + 0.020867, + 0.079705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.063347, + 0.27813, + 0.472509, + 0.6014640000000001, + 0.678023, + 0.704911, + 0.681207, + 0.6102179999999999, + 0.497005, + 0.328104, + 0.120082, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059893999999999996, + 0.267918, + 0.45728199999999997, + 0.5822780000000001, + 0.659768, + 0.684342, + 0.6632140000000001, + 0.596789, + 0.487321, + 0.325628, + 0.11706100000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.057939, + 0.266401, + 0.450442, + 0.570547, + 0.6335230000000001, + 0.6497179999999999, + 0.62914, + 0.568915, + 0.46653, + 0.313031, + 0.112288, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.054674, + 0.256502, + 0.436181, + 0.560947, + 0.5430510000000001, + 0.5617759999999999, + 0.646557, + 0.576778, + 0.462645, + 0.29918599999999995, + 0.103493, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052175, + 0.253827, + 0.441199, + 0.565236, + 0.636888, + 0.660554, + 0.639398, + 0.572006, + 0.462787, + 0.30038400000000004, + 0.100241, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.05171, + 0.255584, + 0.441209, + 0.5668150000000001, + 0.6413070000000001, + 0.668728, + 0.6488740000000001, + 0.5809030000000001, + 0.466656, + 0.30166699999999996, + 0.100827, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.050858, + 0.253434, + 0.43593, + 0.554246, + 0.620658, + 0.636805, + 0.607407, + 0.542194, + 0.44450599999999996, + 0.291452, + 0.09598999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.048127, + 0.243536, + 0.416502, + 0.45360500000000004, + 0.537848, + 0.6210370000000001, + 0.5384840000000001, + 0.44772500000000004, + 0.447344, + 0.251609, + 0.088078, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043531, + 0.219894, + 0.398851, + 0.524128, + 0.598099, + 0.6264109999999999, + 0.608898, + 0.557902, + 0.44674, + 0.28036700000000003, + 0.08276900000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043183, + 0.236495, + 0.416605, + 0.5397150000000001, + 0.62014, + 0.6529969999999999, + 0.635564, + 0.570061, + 0.45686200000000005, + 0.286976, + 0.084994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.042483, + 0.24319300000000002, + 0.430652, + 0.557433, + 0.634103, + 0.65854, + 0.632051, + 0.559492, + 0.446678, + 0.279265, + 0.08178, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041898000000000005, + 0.244881, + 0.436876, + 0.562731, + 0.6375449999999999, + 0.660394, + 0.633298, + 0.5588719999999999, + 0.447255, + 0.28070100000000003, + 0.080154, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038862, + 0.240059, + 0.423147, + 0.538959, + 0.618309, + 0.651651, + 0.636895, + 0.568049, + 0.453351, + 0.280725, + 0.07465000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035768, + 0.235137, + 0.422114, + 0.545661, + 0.618355, + 0.642042, + 0.616854, + 0.551388, + 0.442795, + 0.273832, + 0.070149, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.032957, + 0.230689, + 0.418208, + 0.539057, + 0.606037, + 0.6251019999999999, + 0.599024, + 0.534023, + 0.426995, + 0.262783, + 0.066952, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030677, + 0.229981, + 0.421015, + 0.546366, + 0.623522, + 0.650821, + 0.628068, + 0.558356, + 0.44204899999999997, + 0.26723399999999997, + 0.068591, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028468, + 0.22783799999999998, + 0.419799, + 0.541416, + 0.614899, + 0.63891, + 0.61291, + 0.5444289999999999, + 0.431063, + 0.260906, + 0.063857, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023306, + 0.20844900000000002, + 0.392553, + 0.5177609999999999, + 0.5979629999999999, + 0.6250439999999999, + 0.601333, + 0.481858, + 0.251106, + 0.163836, + 0.038179000000000005, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021533999999999998, + 0.206279, + 0.392372, + 0.523848, + 0.603898, + 0.63189, + 0.6067659999999999, + 0.5359109999999999, + 0.408934, + 0.233927, + 0.051175, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021013999999999998, + 0.210345, + 0.409751, + 0.54832, + 0.635013, + 0.6729080000000001, + 0.657267, + 0.586643, + 0.465536, + 0.27495800000000004, + 0.06324, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023575, + 0.232213, + 0.438413, + 0.570172, + 0.648104, + 0.6710900000000001, + 0.643169, + 0.571905, + 0.45200999999999997, + 0.26927100000000004, + 0.060287999999999994, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.022057, + 0.229532, + 0.432834, + 0.564585, + 0.6408769999999999, + 0.663053, + 0.634691, + 0.556892, + 0.43673700000000004, + 0.25705399999999995, + 0.0555, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019889, + 0.22059600000000001, + 0.418784, + 0.544142, + 0.621509, + 0.644906, + 0.620247, + 0.547282, + 0.428476, + 0.248886, + 0.050881, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.018111000000000002, + 0.215781, + 0.41248599999999996, + 0.536329, + 0.6052390000000001, + 0.625668, + 0.598826, + 0.378624, + 0.37693, + 0.196311, + 0.046908, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017030999999999998, + 0.21016200000000002, + 0.40384800000000004, + 0.398018, + 0.5812350000000001, + 0.60954, + 0.592482, + 0.528775, + 0.417814, + 0.23981899999999998, + 0.023097000000000003, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.014684, + 0.2049, + 0.402571, + 0.5423429999999999, + 0.547418, + 0.4093, + 0.30870299999999995, + 0.547997, + 0.319856, + 0.220202, + 0.036376, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.011456, + 0.19670500000000002, + 0.39527100000000004, + 0.528978, + 0.60876, + 0.6316799999999999, + 0.6076480000000001, + 0.5428339999999999, + 0.42582, + 0.242606, + 0.040801000000000004, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.013673999999999999, + 0.214113, + 0.420834, + 0.5597430000000001, + 0.6427039999999999, + 0.67048, + 0.642612, + 0.565605, + 0.4367, + 0.24651599999999999, + 0.038451, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012035, + 0.20561600000000002, + 0.40593599999999996, + 0.54108, + 0.6207, + 0.647239, + 0.6209779999999999, + 0.545631, + 0.42242, + 0.23296899999999998, + 0.033108, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008978, + 0.192532, + 0.388581, + 0.521621, + 0.60124, + 0.629786, + 0.6043350000000001, + 0.531867, + 0.409298, + 0.227534, + 0.029854, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007753, + 0.187654, + 0.38234199999999996, + 0.511464, + 0.585287, + 0.60662, + 0.581268, + 0.511805, + 0.398883, + 0.224148, + 0.02818, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.007053, + 0.185805, + 0.375927, + 0.500037, + 0.56963, + 0.597468, + 0.5773830000000001, + 0.510872, + 0.39615, + 0.219048, + 0.026705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004099, + 0.18094200000000002, + 0.37263, + 0.5011909999999999, + 0.574722, + 0.597499, + 0.570586, + 0.501077, + 0.384611, + 0.20900200000000002, + 0.02296, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004468, + 0.175241, + 0.364012, + 0.478192, + 0.5475460000000001, + 0.583438, + 0.439335, + 0.504962, + 0.389358, + 0.21044300000000002, + 0.022756000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.177291, + 0.373799, + 0.507509, + 0.591043, + 0.6192960000000001, + 0.597124, + 0.52324, + 0.400737, + 0.21434, + 0.021555, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.150385, + 0.338997, + 0.4818, + 0.572628, + 0.6017469999999999, + 0.580009, + 0.373573, + 0.37421, + 0.194152, + 0.003354, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.14979699999999999, + 0.228929, + 0.481213, + 0.568846, + 0.600154, + 0.580215, + 0.51209, + 0.392079, + 0.20922900000000003, + 0.020467, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08083199999999999, + 0.232099, + 0.482801, + 0.5627190000000001, + 0.498164, + 0.435174, + 0.351072, + 0.28915199999999996, + 0.14305199999999998, + 0.003283, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024513, + 0.346494, + 0.32615, + 0.573357, + 0.607205, + 0.588825, + 0.51916, + 0.39595800000000003, + 0.20794900000000002, + 0.012917999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.151341, + 0.34754599999999997, + 0.489064, + 0.571661, + 0.602927, + 0.581693, + 0.509258, + 0.385441, + 0.201382, + 0.016177, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.17056100000000002, + 0.383116, + 0.534518, + 0.6196240000000001, + 0.647965, + 0.620694, + 0.5450839999999999, + 0.41609199999999996, + 0.218616, + 0.018501, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.160016, + 0.363435, + 0.506499, + 0.590881, + 0.619033, + 0.595371, + 0.5193369999999999, + 0.395272, + 0.17350200000000002, + 0.008966, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07596800000000001, + 0.241744, + 0.49944700000000003, + 0.455626, + 0.50849, + 0.320034, + 0.23671999999999999, + 0.108423, + 0.16964400000000002, + 0.007622, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.14062799999999998, + 0.189454, + 0.4714, + 0.408132, + 0.430942, + 0.178798, + 0.504814, + 0.380819, + 0.19515000000000002, + 0.011653, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.14677199999999999, + 0.33975700000000003, + 0.47808999999999996, + 0.56304, + 0.502155, + 0.41929099999999997, + 0.36426, + 0.176563, + 0.067291, + 0.001113, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.14144800000000002, + 0.338646, + 0.485058, + 0.563625, + 0.5907749999999999, + 0.56692, + 0.494998, + 0.373198, + 0.191473, + 0.011846, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06433499999999999, + 0.231017, + 0.335453, + 0.5473830000000001, + 0.5823740000000001, + 0.562813, + 0.494665, + 0.37210899999999997, + 0.137154, + 0.007687, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.143591, + 0.349757, + 0.499045, + 0.5885560000000001, + 0.621398, + 0.597831, + 0.522635, + 0.39282999999999996, + 0.202256, + 0.008407, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0635, + 0.34009100000000003, + 0.486976, + 0.569596, + 0.603739, + 0.584653, + 0.515358, + 0.390985, + 0.20262, + 0.012493, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06314800000000001, + 0.33870100000000003, + 0.475841, + 0.549922, + 0.585296, + 0.5681620000000001, + 0.49886, + 0.374455, + 0.193519, + 0.011385, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06573999999999999, + 0.330195, + 0.468435, + 0.5446190000000001, + 0.56514, + 0.542883, + 0.482128, + 0.365375, + 0.191405, + 0.011933999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.05315400000000001, + 0.20283299999999999, + 0.33069299999999996, + 0.45095100000000005, + 0.440981, + 0.41150099999999995, + 0.458339, + 0.353757, + 0.183159, + 0.009366, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.053342, + 0.208784, + 0.453227, + 0.543203, + 0.5821689999999999, + 0.565639, + 0.501481, + 0.37741399999999997, + 0.196145, + 0.011381, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.120463, + 0.314512, + 0.46050599999999997, + 0.546219, + 0.583488, + 0.565106, + 0.49794499999999997, + 0.371956, + 0.094087, + 0.001062, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015433, + 0.131639, + 0.20315799999999998, + 0.012362, + 0.06952599999999999, + 0.02618, + 0.032836, + 0.08994100000000001, + 0.056783, + 0.010027, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10819100000000001, + 0.29938400000000004, + 0.364867, + 0.43964, + 0.42477699999999996, + 0.445087, + 0.31572100000000003, + 0.13458699999999998, + 0.020681, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.036859, + 0.08828100000000001, + 0.08282099999999999, + 0.130786, + 0.351127, + 0.336097, + 0.379638, + 0.27890699999999996, + 0.17896, + 0.005429000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10466800000000001, + 0.00507, + 0.457807, + 0.307574, + 0.372399, + 0.401781, + 0.200015, + 0.005702, + 0.190623, + 0.00495, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.107344, + 0.314921, + 0.476922, + 0.569009, + 0.607897, + 0.590093, + 0.520841, + 0.39121, + 0.197143, + 0.00566, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10728, + 0.303464, + 0.45329899999999995, + 0.5405570000000001, + 0.5793339999999999, + 0.45904700000000004, + 0.49782499999999996, + 0.266731, + 0.146287, + 0.008859, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.100965, + 0.30238400000000004, + 0.45943599999999996, + 0.547574, + 0.584808, + 0.566751, + 0.35568299999999997, + 0.372574, + 0.190185, + 0.009074, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.101205, + 0.307601, + 0.466706, + 0.561849, + 0.600324, + 0.5808289999999999, + 0.511471, + 0.383149, + 0.193938, + 0.009578, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.10023, + 0.31065699999999996, + 0.471208, + 0.515823, + 0.5230130000000001, + 0.575727, + 0.414311, + 0.380789, + 0.198157, + 0.010682, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.09473999999999999, + 0.29558, + 0.45243, + 0.546573, + 0.5901810000000001, + 0.5813189999999999, + 0.21108600000000002, + 0.141643, + 0.193686, + 0.009659000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08902800000000001, + 0.294024, + 0.357752, + 0.324027, + 0.582724, + 0.027924, + 0.19164599999999998, + 0.076059, + 0.10757, + 0.007665, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.092065, + 0.298016, + 0.46426, + 0.560408, + 0.6031369999999999, + 0.587172, + 0.515438, + 0.388034, + 0.20076, + 0.011305999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.091671, + 0.29983, + 0.463589, + 0.560024, + 0.5989779999999999, + 0.5815359999999999, + 0.5132749999999999, + 0.387034, + 0.20096899999999998, + 0.012029, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.085336, + 0.158522, + 0.444445, + 0.5304840000000001, + 0.559742, + 0.549946, + 0.48927499999999996, + 0.372391, + 0.194496, + 0.011257999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07577500000000001, + 0.17056100000000002, + 0.446291, + 0.40341899999999997, + 0.413005, + 0.38709899999999997, + 0.077582, + 0.285616, + 0.19878800000000002, + 0.006972000000000001, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08317400000000001, + 0.293077, + 0.46144, + 0.562736, + 0.607542, + 0.59468, + 0.527851, + 0.400974, + 0.211105, + 0.01591, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.085075, + 0.291786, + 0.45381299999999997, + 0.546158, + 0.583913, + 0.568297, + 0.504597, + 0.385032, + 0.20467500000000002, + 0.008119999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.061225999999999996, + 0.07191, + 0.43544, + 0.433187, + 0.44755700000000004, + 0.56165, + 0.45692099999999997, + 0.383309, + 0.2027, + 0.015527, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.079315, + 0.288259, + 0.45148, + 0.544455, + 0.582112, + 0.56726, + 0.502379, + 0.38518, + 0.206497, + 0.015752000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.075518, + 0.279343, + 0.43961500000000003, + 0.5184160000000001, + 0.5501860000000001, + 0.5440470000000001, + 0.485947, + 0.371241, + 0.19733799999999999, + 0.013205999999999999, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.030548, + 0.149894, + 0.250506, + 0.453637, + 0.57217, + 0.448015, + 0.516853, + 0.397627, + 0.212008, + 0.014402, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067276, + 0.263601, + 0.43258300000000005, + 0.526889, + 0.437587, + 0.5638, + 0.502197, + 0.383875, + 0.204656, + 0.016835999999999997, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.068893, + 0.269957, + 0.43371499999999996, + 0.5284310000000001, + 0.570666, + 0.558982, + 0.302652, + 0.32002600000000003, + 0.08913, + 0.003676, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.065553, + 0.262365, + 0.432004, + 0.527038, + 0.570743, + 0.560129, + 0.500919, + 0.343792, + 0.205208, + 0.011622, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.07253799999999999, + 0.285231, + 0.458283, + 0.559757, + 0.600951, + 0.475324, + 0.35981, + 0.27920100000000003, + 0.110406, + 0.006163, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.071065, + 0.282051, + 0.45328399999999996, + 0.549851, + 0.493921, + 0.5162519999999999, + 0.518815, + 0.402447, + 0.224782, + 0.024914000000000002, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.06468, + 0.26617799999999997, + 0.431159, + 0.41487999999999997, + 0.448781, + 0.41622899999999996, + 0.344767, + 0.25162799999999996, + 0.112171, + 0.006654, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.017875, + 0.099539, + 0.147631, + 0.280245, + 0.409477, + 0.459101, + 0.323611, + 0.179341, + 0.212308, + 0.015411, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.008386, + 0.179917, + 0.319699, + 0.281781, + 0.150833, + 0.14043799999999998, + 0.04218, + 0.096152, + 0.076027, + 0.004096, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.016027, + 0.007328, + 0.146984, + 0.081163, + 0.120132, + 0.048034999999999994, + 0.105957, + 0.293942, + 0.05697, + 0.022897999999999998, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.051933999999999994, + 0.040779, + 0.191251, + 0.051662, + 0.145851, + 0.147685, + 0.12615, + 0.089821, + 0.07617600000000001, + 0.005256, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052993000000000005, + 0.24642, + 0.416819, + 0.526861, + 0.574294, + 0.43489, + 0.371593, + 0.401469, + 0.167606, + 0.035059, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "electric_to_load_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.22, + 2.608, + 4.262, + 5.224, + 5.655, + 5.579, + 5.011, + 3.929, + 2.26, + 0.332, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.217, + 2.646, + 4.323, + 5.292, + 5.73, + 5.659, + 5.056, + 3.981, + 2.307, + 0.081, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.216, + 1.392, + 4.36, + 5.395, + 5.894, + 5.83, + 5.26, + 4.15, + 2.428, + 0.379, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.61, + 2.679, + 4.374, + 5.368, + 5.801, + 5.726, + 5.155, + 4.072, + 2.393, + 0.378, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.213, + 2.583, + 4.235, + 5.201, + 5.636, + 5.565, + 4.117, + 2.767, + 2.352, + 0.224, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.238, + 2.573, + 4.148, + 3.683, + 3.68, + 4.348, + 4.967, + 3.957, + 2.361, + 0.407, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.559, + 2.491, + 4.075, + 5.042, + 5.509, + 5.483, + 4.979, + 3.954, + 2.342, + 0.428, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.59, + 2.638, + 4.369, + 5.426, + 5.94, + 5.888, + 5.319, + 4.257, + 2.536, + 0.498, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.206, + 1.435, + 4.292, + 5.262, + 5.729, + 5.678, + 5.149, + 4.12, + 2.49, + 0.521, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.272, + 2.573, + 4.219, + 4.452, + 4.237, + 4.835, + 3.476, + 3.098, + 1.646, + 0.237, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.051, + 0.296, + 1.531, + 4.868, + 5.426, + 4.374, + 3.968, + 4.003, + 2.21, + 0.543, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.541, + 2.513, + 4.182, + 5.193, + 5.685, + 5.647, + 5.1, + 4.094, + 2.505, + 0.592, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.558, + 2.53, + 4.157, + 5.095, + 5.575, + 5.567, + 5.082, + 4.108, + 2.521, + 0.6, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.599, + 2.626, + 4.309, + 5.3, + 4.858, + 4.256, + 3.802, + 3.564, + 2.093, + 0.675, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.299, + 2.453, + 4.012, + 3.821, + 4.509, + 2.944, + 4.994, + 1.906, + 0.291, + 0.187, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.533, + 2.426, + 4.096, + 5.144, + 5.673, + 5.674, + 5.184, + 4.184, + 2.59, + 0.68, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.556, + 2.443, + 4.031, + 5.004, + 5.519, + 4.465, + 5.067, + 4.119, + 2.565, + 0.705, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.444, + 1.938, + 2.57, + 4.161, + 4.605, + 4.487, + 3.112, + 2.734, + 1.274, + 0.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.486, + 0.444, + 1.665, + 2.641, + 2.525, + 5.603, + 5.143, + 2.649, + 1.89, + 0.198, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.572, + 2.516, + 4.229, + 5.243, + 5.784, + 2.68, + 0.603, + 0.854, + 0.09, + 0.129, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.266, + 1.318, + 3.279, + 4.281, + 4.568, + 4.681, + 3.649, + 2.75, + 2.265, + 0.845, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.646, + 2.635, + 4.231, + 5.207, + 5.755, + 5.778, + 5.281, + 4.314, + 2.788, + 0.855, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.616, + 2.533, + 4.154, + 3.754, + 4.616, + 4.174, + 3.826, + 3.359, + 1.982, + 0.378, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.183, + 1.258, + 1.6, + 2.373, + 2.419, + 2.546, + 2.138, + 0.838, + 0.448, + 0.177, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.555, + 1.454, + 1.032, + 1.7, + 0.055, + 5.545, + 4.537, + 2.93, + 0.938, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.609, + 1.716, + 3.35, + 0.262, + 4.522, + 4.471, + 3.659, + 0.132, + 2.805, + 0.869, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.712, + 2.857, + 4.68, + 5.819, + 6.358, + 6.352, + 5.851, + 4.854, + 3.2, + 1.089, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.812, + 2.95, + 4.705, + 5.768, + 6.3, + 6.298, + 5.778, + 4.751, + 3.15, + 1.105, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.809, + 2.914, + 4.58, + 5.554, + 6.014, + 5.982, + 4.335, + 3.913, + 1.946, + 0.522, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.344, + 2.78, + 4.443, + 4.547, + 4.967, + 4.92, + 4.382, + 3.626, + 2.387, + 0.668, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.257, + 2.252, + 3.544, + 6.28, + 6.326, + 5.831, + 4.813, + 3.22, + 1.038, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.677, + 2.62, + 4.291, + 5.285, + 5.798, + 5.884, + 5.484, + 4.606, + 3.112, + 1.111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.862, + 3.016, + 4.74, + 4.851, + 5.172, + 4.907, + 5.749, + 4.757, + 3.259, + 1.27, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.919, + 3.04, + 4.706, + 5.709, + 6.215, + 6.201, + 5.699, + 4.753, + 3.266, + 1.295, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.88, + 2.933, + 4.582, + 5.617, + 6.123, + 6.126, + 5.623, + 4.677, + 3.207, + 1.263, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.33, + 1.69, + 2.946, + 4.481, + 4.921, + 4.581, + 3.882, + 3.569, + 2.108, + 0.649, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.896, + 2.899, + 4.432, + 5.463, + 6.023, + 6.093, + 4.812, + 3.902, + 2.7, + 0.942, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.591, + 2.22, + 3.463, + 4.33, + 5.232, + 4.32, + 4.001, + 3.1, + 2.54, + 0.907, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.539, + 1.531, + 2.971, + 3.204, + 2.755, + 4.337, + 4.456, + 2.766, + 2.197, + 0.657, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.868, + 2.143, + 3.424, + 3.792, + 4.712, + 1.57, + 1.733, + 1.008, + 0.833, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.232, + 1.506, + 0.857, + 1.842, + 4.294, + 4.003, + 4.301, + 3.565, + 2.616, + 0.491, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 2.979, + 4.661, + 5.736, + 6.334, + 6.398, + 5.914, + 4.972, + 3.444, + 1.422, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.969, + 2.956, + 3.167, + 5.67, + 6.263, + 6.306, + 5.91, + 4.943, + 3.429, + 0.152, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.054, + 3.14, + 4.825, + 2.86, + 6.44, + 6.497, + 6.051, + 5.093, + 2.867, + 1.51, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.134, + 3.267, + 4.948, + 6.057, + 6.636, + 6.657, + 6.174, + 5.179, + 3.665, + 1.609, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.535, + 3.32, + 4.897, + 5.876, + 6.391, + 6.401, + 5.898, + 4.945, + 3.496, + 1.556, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.173, + 3.209, + 4.803, + 5.824, + 6.36, + 6.403, + 5.942, + 4.989, + 3.534, + 1.555, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.177, + 3.238, + 4.853, + 5.903, + 6.423, + 6.419, + 5.938, + 4.962, + 2.977, + 0.51, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.503, + 2.179, + 2.958, + 3.875, + 3.398, + 2.196, + 4.002, + 3.837, + 2.773, + 1.196, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.287, + 0.228, + 0.302, + 1.024, + 5.04, + 4.217, + 5.061, + 3.629, + 1.646, + 0.03, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.29, + 3.342, + 4.884, + 5.885, + 6.426, + 6.475, + 6.046, + 5.145, + 3.686, + 1.717, + 0.037, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.277, + 3.269, + 4.726, + 5.693, + 6.297, + 6.413, + 6.038, + 5.157, + 3.733, + 1.752, + 0.048, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.299, + 1.322, + 1.354, + 0.957, + 4.366, + 5.138, + 4.688, + 3.623, + 2.702, + 1.195, + 0.024, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.502, + 3.77, + 5.46, + 6.563, + 7.165, + 7.222, + 6.754, + 5.739, + 4.177, + 1.978, + 0.085, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.525, + 3.708, + 5.292, + 6.288, + 6.682, + 6.58, + 6.037, + 5.183, + 3.879, + 1.895, + 0.089, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.48, + 3.577, + 5.193, + 6.29, + 6.86, + 6.894, + 4.971, + 1.135, + 0.365, + 0.577, + 0.085, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.483, + 3.58, + 5.117, + 6.172, + 6.739, + 6.792, + 6.333, + 5.399, + 3.952, + 1.9, + 0.097, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.049, + 3.792, + 5.47, + 5.315, + 5.515, + 7.221, + 6.732, + 5.714, + 0.466, + 0.551, + 0.029, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.697, + 3.939, + 5.579, + 6.651, + 7.23, + 7.266, + 6.793, + 5.792, + 4.268, + 0.078, + 0.103, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.294, + 2.478, + 2.243, + 3.083, + 4.408, + 0.768, + 4.257, + 2.742, + 0.888, + 1.081, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.663, + 2.365, + 3.112, + 3.949, + 4.951, + 4.282, + 4.0, + 2.829, + 1.937, + 0.85, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.012, + 0.926, + 2.404, + 3.808, + 5.261, + 5.44, + 5.19, + 5.786, + 4.325, + 2.577, + 1.064, + 0.049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059, + 1.699, + 3.743, + 3.844, + 5.077, + 5.447, + 5.634, + 4.355, + 3.776, + 3.889, + 1.947, + 0.153, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.076, + 1.764, + 3.769, + 5.108, + 6.043, + 4.558, + 6.602, + 6.195, + 4.419, + 3.886, + 1.128, + 0.161, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.033, + 1.0, + 2.393, + 3.201, + 6.102, + 6.602, + 5.4, + 6.272, + 5.32, + 3.896, + 1.973, + 0.179, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.095, + 1.889, + 4.008, + 5.515, + 5.401, + 5.731, + 5.213, + 5.074, + 4.705, + 3.3, + 2.121, + 0.086, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.124, + 2.044, + 4.199, + 5.729, + 6.705, + 7.142, + 7.079, + 6.572, + 5.618, + 4.176, + 1.745, + 0.181, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.079, + 1.559, + 4.031, + 5.476, + 6.405, + 6.771, + 6.584, + 5.99, + 5.203, + 3.141, + 1.681, + 0.226, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.146, + 2.003, + 3.138, + 5.465, + 6.439, + 6.908, + 6.877, + 6.423, + 5.451, + 4.041, + 2.093, + 0.259, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.163, + 1.361, + 2.962, + 5.722, + 5.556, + 5.467, + 5.934, + 4.971, + 4.331, + 2.827, + 1.64, + 0.218, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.198, + 2.122, + 4.213, + 5.713, + 6.713, + 7.175, + 7.132, + 6.587, + 5.604, + 4.166, + 2.177, + 0.3, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.225, + 2.128, + 4.17, + 5.623, + 6.607, + 7.087, + 7.104, + 6.609, + 5.623, + 4.2, + 2.223, + 0.321, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.269, + 2.216, + 4.223, + 5.585, + 6.428, + 6.853, + 6.842, + 6.422, + 5.537, + 4.154, + 2.215, + 0.329, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.29, + 2.24, + 4.312, + 5.758, + 6.749, + 7.192, + 7.116, + 6.618, + 5.602, + 4.168, + 2.225, + 0.338, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.307, + 2.168, + 4.108, + 5.352, + 6.216, + 6.548, + 6.688, + 6.34, + 5.499, + 4.174, + 2.275, + 0.357, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.358, + 2.384, + 4.45, + 5.899, + 6.893, + 7.383, + 7.36, + 6.847, + 5.877, + 3.942, + 1.763, + 0.308, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.396, + 2.468, + 4.581, + 6.054, + 7.0, + 7.414, + 7.303, + 6.735, + 5.786, + 4.362, + 2.402, + 0.406, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.415, + 2.497, + 4.579, + 6.012, + 6.953, + 7.364, + 7.253, + 6.647, + 5.64, + 4.251, + 2.361, + 0.411, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.227, + 1.5, + 2.773, + 5.281, + 5.882, + 5.685, + 5.631, + 5.329, + 4.043, + 4.178, + 2.311, + 0.41, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.442, + 2.371, + 4.272, + 5.626, + 6.524, + 6.993, + 6.998, + 6.554, + 5.592, + 4.178, + 2.265, + 0.404, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.465, + 2.334, + 4.196, + 5.467, + 6.17, + 6.548, + 6.706, + 6.413, + 5.577, + 4.212, + 2.312, + 0.423, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.505, + 2.43, + 3.305, + 4.298, + 6.129, + 5.83, + 5.705, + 5.137, + 4.737, + 4.066, + 1.711, + 0.341, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.5, + 2.376, + 3.269, + 4.954, + 6.56, + 6.935, + 6.827, + 6.3, + 4.023, + 3.604, + 1.772, + 0.429, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.527, + 2.412, + 4.226, + 5.557, + 6.626, + 7.122, + 7.13, + 5.863, + 5.63, + 4.253, + 2.33, + 0.454, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.597, + 2.628, + 4.605, + 6.054, + 7.051, + 7.536, + 1.803, + 4.366, + 4.338, + 2.823, + 1.094, + 0.485, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.616, + 2.661, + 4.603, + 5.975, + 6.816, + 7.21, + 7.255, + 6.778, + 5.811, + 4.369, + 1.162, + 0.496, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.638, + 2.582, + 4.395, + 5.646, + 6.429, + 5.988, + 5.98, + 5.476, + 5.017, + 4.078, + 2.283, + 0.491, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.652, + 1.592, + 3.228, + 5.599, + 6.621, + 6.811, + 5.368, + 5.617, + 5.605, + 3.923, + 1.641, + 0.356, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.767, + 2.98, + 4.966, + 6.374, + 7.301, + 7.735, + 7.652, + 7.081, + 6.079, + 4.599, + 2.609, + 0.563, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.755, + 2.804, + 4.686, + 6.063, + 7.024, + 7.497, + 7.479, + 7.028, + 6.041, + 4.563, + 0.047, + 0.024, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.837, + 3.067, + 5.077, + 6.506, + 7.462, + 7.922, + 7.824, + 7.266, + 6.2, + 4.701, + 2.665, + 0.595, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.855, + 3.012, + 4.907, + 6.257, + 7.098, + 7.439, + 7.3, + 5.676, + 5.838, + 4.443, + 2.564, + 0.593, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.841, + 2.833, + 3.834, + 4.69, + 6.289, + 6.767, + 6.89, + 6.53, + 5.685, + 4.327, + 2.498, + 0.587, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.886, + 2.914, + 3.241, + 5.076, + 6.859, + 7.344, + 7.364, + 6.896, + 5.945, + 4.54, + 2.607, + 0.626, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.947, + 3.098, + 5.04, + 6.458, + 7.343, + 7.775, + 7.747, + 7.215, + 6.186, + 2.949, + 2.645, + 0.656, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.005, + 3.161, + 5.091, + 6.494, + 7.44, + 7.812, + 7.717, + 7.138, + 6.101, + 4.625, + 2.657, + 0.674, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.035, + 3.183, + 5.034, + 6.348, + 7.144, + 7.437, + 7.274, + 6.743, + 5.843, + 4.523, + 2.653, + 0.677, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.759, + 3.034, + 4.741, + 6.02, + 6.883, + 7.32, + 7.283, + 6.8, + 5.828, + 4.406, + 2.597, + 0.667, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.046, + 3.066, + 4.783, + 6.09, + 6.948, + 7.402, + 7.409, + 6.941, + 5.944, + 4.484, + 2.367, + 0.611, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.116, + 3.21, + 4.985, + 6.287, + 7.206, + 7.649, + 7.64, + 7.102, + 6.103, + 4.663, + 2.748, + 0.71, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004, + 3.203, + 3.016, + 6.415, + 1.444, + 4.144, + 7.73, + 7.18, + 5.25, + 3.248, + 0.588, + 0.025, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.152, + 3.236, + 3.018, + 6.401, + 7.295, + 7.7, + 6.494, + 7.033, + 3.593, + 1.82, + 1.564, + 0.351, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.004, + 3.181, + 5.076, + 1.59, + 0.2, + 0.644, + 0.306, + 1.173, + 1.16, + 2.116, + 0.762, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.819, + 3.504, + 5.369, + 6.721, + 7.533, + 7.912, + 7.787, + 7.197, + 6.17, + 4.746, + 2.815, + 0.757, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.019, + 1.226, + 3.293, + 4.982, + 6.137, + 6.73, + 6.946, + 7.016, + 6.685, + 5.852, + 4.548, + 2.699, + 0.751, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.024, + 1.239, + 3.269, + 4.915, + 6.096, + 6.829, + 7.099, + 6.935, + 6.522, + 5.703, + 4.424, + 2.666, + 0.753, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.028, + 1.25, + 3.26, + 4.828, + 5.89, + 6.507, + 6.833, + 6.942, + 6.626, + 5.777, + 4.463, + 2.692, + 0.75, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.051, + 0.992, + 3.257, + 4.897, + 5.103, + 5.765, + 7.17, + 7.086, + 6.641, + 5.75, + 4.438, + 2.128, + 0.755, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.046, + 1.302, + 3.335, + 4.977, + 6.101, + 6.746, + 6.961, + 6.725, + 6.14, + 5.307, + 4.145, + 2.484, + 0.744, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037, + 1.27, + 3.128, + 4.774, + 5.961, + 6.829, + 7.054, + 6.805, + 6.174, + 5.237, + 4.152, + 2.579, + 0.751, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.042, + 1.341, + 3.311, + 4.846, + 5.927, + 6.563, + 6.78, + 6.691, + 6.288, + 5.509, + 4.295, + 2.646, + 0.779, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043, + 1.355, + 3.254, + 4.723, + 5.897, + 6.742, + 7.113, + 7.088, + 6.642, + 5.738, + 4.402, + 2.715, + 0.811, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.057, + 1.427, + 3.424, + 5.032, + 6.189, + 6.978, + 7.359, + 7.288, + 6.905, + 5.971, + 4.631, + 2.862, + 0.865, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.078, + 0.785, + 3.373, + 4.813, + 6.197, + 5.985, + 3.665, + 4.27, + 4.543, + 1.705, + 1.564, + 1.003, + 0.265, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.937, + 2.476, + 3.117, + 3.65, + 1.812, + 4.553, + 5.765, + 5.14, + 3.102, + 3.402, + 2.059, + 0.853, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.081, + 1.484, + 3.493, + 5.137, + 6.398, + 7.22, + 7.61, + 7.549, + 3.641, + 4.521, + 1.964, + 1.156, + 0.201, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.098, + 1.565, + 3.623, + 5.256, + 6.445, + 7.211, + 7.497, + 7.295, + 6.736, + 5.777, + 4.501, + 2.759, + 0.885, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.112, + 1.533, + 3.522, + 5.152, + 6.367, + 7.179, + 7.374, + 7.085, + 6.465, + 5.517, + 4.321, + 2.738, + 0.889, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.129, + 1.551, + 3.496, + 5.075, + 6.209, + 6.866, + 7.034, + 6.779, + 6.293, + 5.494, + 4.323, + 2.662, + 0.874, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.135, + 1.536, + 3.4, + 4.793, + 5.923, + 6.755, + 7.155, + 7.131, + 6.68, + 5.759, + 4.426, + 2.862, + 0.924, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.136, + 1.611, + 3.609, + 5.178, + 6.298, + 6.981, + 7.135, + 6.779, + 6.229, + 5.613, + 4.448, + 2.776, + 0.909, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.15, + 1.583, + 3.511, + 5.033, + 6.098, + 6.746, + 6.902, + 6.64, + 6.283, + 5.601, + 4.405, + 2.731, + 0.905, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.15, + 1.532, + 3.444, + 4.953, + 6.026, + 6.71, + 6.897, + 6.731, + 6.19, + 5.412, + 4.235, + 2.648, + 0.902, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.17, + 1.544, + 3.332, + 4.661, + 5.684, + 6.477, + 6.859, + 6.864, + 6.451, + 5.622, + 4.374, + 2.73, + 0.932, + 0.008, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.187, + 1.642, + 3.548, + 4.834, + 5.449, + 6.363, + 6.368, + 7.325, + 6.831, + 4.832, + 4.069, + 2.528, + 0.906, + 0.015, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.227, + 1.608, + 3.008, + 4.679, + 6.276, + 7.006, + 7.414, + 2.812, + 3.329, + 6.101, + 4.766, + 2.157, + 1.068, + 0.018, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.266, + 1.714, + 3.674, + 2.687, + 6.52, + 7.342, + 7.717, + 6.81, + 3.485, + 0.789, + 4.021, + 2.183, + 1.059, + 0.029, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.229, + 1.795, + 3.806, + 5.381, + 4.701, + 7.273, + 7.524, + 7.361, + 4.891, + 4.811, + 4.499, + 2.811, + 0.996, + 0.026, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.245, + 1.662, + 3.448, + 4.894, + 6.003, + 6.758, + 7.159, + 7.127, + 6.686, + 5.754, + 4.46, + 2.779, + 1.021, + 0.021, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.287, + 1.7, + 3.521, + 5.044, + 6.222, + 7.067, + 7.461, + 7.405, + 6.874, + 5.968, + 4.634, + 2.91, + 1.044, + 0.038, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.285, + 1.748, + 3.611, + 5.094, + 6.261, + 7.06, + 7.431, + 7.368, + 6.895, + 6.006, + 4.702, + 2.992, + 1.075, + 0.044, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.267, + 1.804, + 3.73, + 5.253, + 6.401, + 7.267, + 7.626, + 7.531, + 7.018, + 6.091, + 4.768, + 3.027, + 1.092, + 0.03, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.281, + 2.007, + 4.11, + 5.69, + 6.809, + 7.471, + 7.754, + 7.597, + 7.03, + 6.149, + 4.846, + 3.107, + 1.149, + 0.04, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.313, + 1.887, + 3.877, + 5.407, + 6.54, + 7.285, + 7.635, + 7.567, + 7.062, + 6.147, + 4.827, + 3.086, + 1.156, + 0.052, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.348, + 1.853, + 3.812, + 5.4, + 6.628, + 7.419, + 7.763, + 6.81, + 1.601, + 4.682, + 4.811, + 3.036, + 1.14, + 0.053, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.336, + 1.828, + 3.72, + 5.245, + 6.393, + 7.144, + 7.511, + 7.447, + 7.01, + 6.09, + 3.884, + 2.628, + 1.036, + 0.074, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.326, + 1.825, + 3.744, + 5.344, + 6.584, + 7.404, + 7.775, + 7.721, + 7.173, + 6.252, + 4.917, + 3.167, + 1.198, + 0.049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.3, + 1.902, + 3.857, + 5.338, + 6.353, + 6.896, + 7.094, + 6.965, + 6.578, + 5.762, + 4.579, + 2.988, + 1.154, + 0.046, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.305, + 1.927, + 3.885, + 5.36, + 6.423, + 7.069, + 7.274, + 7.081, + 6.521, + 5.593, + 4.467, + 2.983, + 1.162, + 0.05, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.308, + 1.877, + 3.753, + 5.174, + 6.237, + 6.82, + 6.965, + 6.698, + 6.125, + 5.499, + 4.491, + 2.948, + 1.148, + 0.053, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.304, + 1.829, + 3.589, + 4.919, + 6.034, + 6.8, + 7.18, + 7.162, + 6.728, + 5.874, + 4.632, + 3.009, + 1.156, + 0.048, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.305, + 1.883, + 3.71, + 5.016, + 5.992, + 6.618, + 6.845, + 6.764, + 6.327, + 5.59, + 4.483, + 2.929, + 1.157, + 0.056, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.321, + 1.794, + 3.549, + 4.923, + 5.987, + 6.767, + 7.113, + 7.104, + 6.677, + 5.849, + 4.641, + 3.057, + 1.205, + 0.057, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.314, + 1.894, + 2.779, + 5.231, + 6.388, + 5.687, + 7.47, + 7.361, + 6.884, + 6.04, + 4.758, + 3.12, + 1.228, + 0.067, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.356, + 1.943, + 3.88, + 5.397, + 6.56, + 7.327, + 7.669, + 7.588, + 7.121, + 6.22, + 4.92, + 3.231, + 1.284, + 0.074, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.399, + 1.967, + 3.859, + 5.374, + 6.551, + 7.364, + 7.681, + 7.595, + 7.091, + 6.179, + 4.888, + 3.198, + 1.288, + 0.092, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.393, + 1.92, + 3.733, + 5.107, + 6.145, + 6.881, + 7.149, + 7.045, + 6.647, + 5.85, + 4.687, + 3.118, + 1.263, + 0.093, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.357, + 1.903, + 3.691, + 5.065, + 6.099, + 6.786, + 7.02, + 6.875, + 6.453, + 5.686, + 4.54, + 2.999, + 1.234, + 0.094, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.367, + 1.874, + 3.593, + 4.942, + 6.03, + 6.776, + 7.11, + 7.059, + 5.284, + 5.793, + 4.584, + 2.729, + 1.21, + 0.109, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.351, + 1.437, + 3.658, + 5.024, + 6.059, + 6.789, + 7.154, + 7.089, + 6.661, + 5.842, + 4.631, + 3.08, + 1.273, + 0.111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.34, + 1.339, + 2.631, + 2.69, + 5.307, + 6.036, + 5.146, + 3.606, + 1.252, + 4.145, + 1.955, + 3.08, + 1.225, + 0.128, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.35, + 1.744, + 3.519, + 5.041, + 6.018, + 6.69, + 7.112, + 6.487, + 4.86, + 5.023, + 4.206, + 2.442, + 1.049, + 0.136, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.345, + 1.405, + 2.757, + 2.3, + 4.778, + 5.525, + 6.216, + 6.096, + 5.705, + 2.951, + 2.595, + 1.871, + 0.764, + 0.135, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.366, + 1.783, + 3.544, + 4.924, + 5.991, + 6.607, + 6.698, + 6.407, + 5.953, + 5.318, + 4.308, + 2.856, + 1.253, + 0.142, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.372, + 1.813, + 3.54, + 4.882, + 5.944, + 6.679, + 7.044, + 7.038, + 6.632, + 5.82, + 4.621, + 3.115, + 1.328, + 0.144, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.241, + 0.827, + 1.936, + 1.405, + 1.71, + 5.694, + 4.893, + 7.138, + 6.813, + 4.741, + 4.76, + 3.136, + 1.367, + 0.157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.401, + 1.901, + 3.763, + 5.262, + 6.425, + 7.194, + 7.568, + 7.516, + 7.061, + 6.172, + 4.904, + 3.275, + 1.404, + 0.17, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.409, + 2.093, + 4.074, + 5.6, + 6.831, + 7.614, + 7.965, + 7.892, + 7.347, + 6.435, + 5.135, + 3.497, + 1.514, + 0.162, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.393, + 2.123, + 4.159, + 5.732, + 6.917, + 7.656, + 7.875, + 7.363, + 7.222, + 6.313, + 5.04, + 3.406, + 1.48, + 0.153, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.38, + 2.023, + 3.923, + 5.37, + 6.388, + 6.995, + 7.225, + 7.04, + 6.509, + 5.633, + 4.548, + 3.169, + 1.403, + 0.169, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.386, + 1.965, + 3.789, + 5.179, + 6.206, + 6.791, + 6.98, + 6.843, + 6.463, + 5.769, + 4.67, + 3.21, + 1.416, + 0.164, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.365, + 1.87, + 3.638, + 5.045, + 6.169, + 6.946, + 7.33, + 7.321, + 6.925, + 6.094, + 4.882, + 3.334, + 1.465, + 0.168, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.385, + 2.034, + 3.796, + 5.366, + 6.289, + 7.036, + 7.642, + 7.588, + 7.109, + 6.248, + 4.983, + 3.392, + 1.485, + 0.186, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.396, + 1.921, + 3.865, + 5.312, + 6.438, + 7.196, + 7.544, + 7.488, + 7.018, + 6.144, + 4.9, + 3.342, + 1.461, + 0.18, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.384, + 1.96, + 3.8, + 5.164, + 6.108, + 6.618, + 6.696, + 6.576, + 6.352, + 5.759, + 4.673, + 3.225, + 1.431, + 0.198, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.383, + 1.885, + 3.623, + 4.916, + 6.01, + 6.759, + 7.119, + 7.103, + 6.694, + 5.893, + 4.647, + 3.187, + 1.369, + 0.181, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.371, + 1.883, + 3.707, + 5.15, + 6.287, + 7.045, + 7.403, + 7.367, + 6.929, + 6.088, + 4.873, + 3.344, + 1.481, + 0.19, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.396, + 1.901, + 3.711, + 5.115, + 6.154, + 6.748, + 6.933, + 6.831, + 6.484, + 5.796, + 4.697, + 3.253, + 1.458, + 0.209, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.383, + 1.881, + 3.707, + 5.107, + 6.094, + 6.618, + 6.821, + 6.738, + 6.419, + 5.76, + 4.66, + 3.223, + 1.462, + 0.21, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.414, + 1.843, + 3.584, + 4.914, + 5.922, + 6.618, + 6.991, + 6.992, + 6.602, + 5.758, + 4.658, + 3.214, + 1.455, + 0.205, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.374, + 1.83, + 3.587, + 4.955, + 5.969, + 6.627, + 6.897, + 6.88, + 6.538, + 5.782, + 4.654, + 3.191, + 1.446, + 0.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.362, + 1.851, + 3.647, + 5.033, + 6.107, + 6.826, + 7.183, + 7.15, + 6.734, + 5.931, + 4.766, + 3.279, + 1.478, + 0.199, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.343, + 1.821, + 3.599, + 4.951, + 5.987, + 6.708, + 7.065, + 7.061, + 6.676, + 5.893, + 4.74, + 3.28, + 1.49, + 0.2, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.333, + 1.812, + 3.566, + 4.901, + 5.924, + 6.467, + 6.923, + 6.987, + 6.623, + 5.868, + 4.589, + 3.142, + 1.462, + 0.191, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.322, + 1.574, + 3.055, + 4.407, + 5.912, + 6.61, + 6.862, + 6.848, + 5.785, + 5.257, + 4.121, + 2.533, + 1.369, + 0.204, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.316, + 1.518, + 3.189, + 4.542, + 5.625, + 6.798, + 6.934, + 6.745, + 6.644, + 6.022, + 4.845, + 3.36, + 1.523, + 0.197, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.322, + 1.726, + 3.356, + 4.578, + 5.606, + 6.31, + 6.672, + 6.654, + 6.265, + 3.591, + 2.21, + 3.028, + 1.411, + 0.216, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.319, + 1.708, + 3.42, + 4.786, + 5.827, + 6.563, + 6.925, + 6.935, + 6.551, + 5.784, + 4.637, + 3.201, + 1.471, + 0.216, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.328, + 1.811, + 3.653, + 5.131, + 6.301, + 7.113, + 7.492, + 7.443, + 6.993, + 6.151, + 4.925, + 3.398, + 1.547, + 0.206, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.359, + 1.884, + 3.762, + 5.16, + 6.138, + 6.689, + 6.979, + 6.997, + 6.687, + 5.996, + 4.873, + 3.39, + 1.542, + 0.203, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.305, + 1.801, + 3.602, + 4.911, + 5.871, + 6.593, + 7.008, + 7.062, + 6.718, + 5.973, + 4.829, + 3.4, + 1.553, + 0.169, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.275, + 1.868, + 3.757, + 5.159, + 6.167, + 6.736, + 7.069, + 7.072, + 6.707, + 5.986, + 4.867, + 3.4, + 1.563, + 0.174, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.269, + 1.87, + 3.786, + 5.225, + 6.293, + 6.969, + 7.325, + 7.301, + 6.903, + 6.125, + 4.969, + 3.465, + 1.586, + 0.17, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.266, + 1.852, + 3.741, + 5.105, + 5.995, + 6.524, + 6.802, + 6.797, + 6.461, + 5.776, + 4.729, + 3.309, + 1.521, + 0.16, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.256, + 1.793, + 3.583, + 4.816, + 5.608, + 6.277, + 5.472, + 6.693, + 6.117, + 5.434, + 4.369, + 3.111, + 1.432, + 0.206, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.285, + 1.598, + 3.275, + 4.591, + 5.601, + 6.286, + 6.614, + 6.592, + 5.614, + 5.618, + 4.523, + 3.091, + 1.409, + 0.209, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.319, + 1.527, + 3.209, + 4.542, + 5.573, + 6.29, + 6.682, + 5.861, + 5.576, + 5.596, + 4.499, + 3.081, + 1.415, + 0.228, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.272, + 1.617, + 3.409, + 4.845, + 5.951, + 6.723, + 7.096, + 7.079, + 6.733, + 5.955, + 4.792, + 3.31, + 1.495, + 0.169, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.239, + 1.679, + 3.518, + 4.986, + 6.119, + 6.88, + 7.262, + 7.253, + 6.844, + 6.037, + 4.87, + 3.405, + 1.548, + 0.167, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.253, + 1.641, + 3.422, + 4.82, + 5.877, + 6.584, + 6.972, + 6.967, + 6.624, + 5.833, + 4.635, + 3.178, + 1.46, + 0.229, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.215, + 0.803, + 2.65, + 1.954, + 5.098, + 5.286, + 4.745, + 5.133, + 4.841, + 2.78, + 3.61, + 2.614, + 0.968, + 0.192, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.283, + 1.625, + 3.43, + 4.962, + 6.162, + 7.028, + 7.406, + 7.35, + 6.958, + 6.175, + 4.984, + 3.451, + 1.564, + 0.161, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.216, + 1.671, + 3.549, + 5.006, + 6.079, + 6.797, + 7.162, + 7.145, + 6.784, + 6.032, + 4.882, + 3.369, + 1.515, + 0.151, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.199, + 1.669, + 3.52, + 4.938, + 5.956, + 6.626, + 7.007, + 6.985, + 6.623, + 5.873, + 4.74, + 3.261, + 1.46, + 0.157, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.059, + 0.714, + 2.59, + 3.595, + 4.432, + 3.088, + 3.983, + 4.003, + 4.577, + 5.361, + 4.351, + 3.109, + 1.392, + 0.167, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08, + 0.927, + 3.185, + 4.56, + 5.611, + 6.378, + 6.748, + 6.752, + 6.361, + 5.636, + 4.52, + 3.062, + 1.379, + 0.165, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.195, + 1.515, + 3.293, + 4.709, + 5.811, + 6.569, + 6.955, + 6.948, + 6.588, + 5.831, + 4.699, + 3.238, + 1.438, + 0.147, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.178, + 1.579, + 3.441, + 4.893, + 5.97, + 6.694, + 7.075, + 7.06, + 6.659, + 5.893, + 4.748, + 3.263, + 1.447, + 0.146, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.171, + 1.591, + 3.472, + 4.948, + 6.07, + 6.823, + 7.217, + 7.192, + 6.79, + 5.985, + 4.804, + 3.3, + 1.45, + 0.127, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.161, + 1.567, + 3.413, + 4.876, + 6.002, + 6.807, + 7.218, + 7.219, + 6.836, + 6.057, + 4.89, + 3.381, + 1.489, + 0.122, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.155, + 1.591, + 3.448, + 4.883, + 6.01, + 6.802, + 7.196, + 7.187, + 6.817, + 6.004, + 4.824, + 3.328, + 1.461, + 0.124, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.16, + 1.541, + 3.351, + 4.806, + 5.921, + 6.685, + 7.063, + 7.023, + 6.667, + 5.871, + 4.694, + 3.196, + 1.389, + 0.13, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.164, + 1.434, + 3.178, + 4.575, + 5.652, + 6.399, + 6.787, + 6.755, + 6.376, + 5.601, + 4.445, + 3.015, + 1.269, + 0.084, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021, + 0.575, + 0.638, + 0.589, + 5.466, + 5.488, + 6.362, + 0.551, + 1.722, + 1.475, + 0.194, + 1.14, + 0.143, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.153, + 1.375, + 3.111, + 4.479, + 5.565, + 6.359, + 6.764, + 6.78, + 6.418, + 5.681, + 4.555, + 3.095, + 1.327, + 0.116, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.133, + 1.439, + 3.237, + 4.685, + 5.791, + 6.568, + 6.968, + 6.962, + 6.617, + 5.828, + 4.662, + 3.116, + 1.33, + 0.114, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.128, + 1.413, + 3.238, + 4.691, + 5.783, + 6.503, + 6.89, + 6.916, + 6.551, + 5.796, + 4.661, + 3.139, + 1.338, + 0.105, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.131, + 1.37, + 3.146, + 4.579, + 5.672, + 6.451, + 6.841, + 6.832, + 6.491, + 5.717, + 4.558, + 3.057, + 1.287, + 0.095, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.13, + 1.383, + 3.167, + 4.615, + 5.716, + 6.459, + 6.829, + 6.828, + 6.476, + 5.718, + 4.568, + 3.054, + 1.279, + 0.093, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.114, + 1.364, + 3.181, + 4.639, + 5.727, + 6.437, + 6.816, + 6.799, + 6.384, + 5.645, + 4.525, + 3.056, + 1.271, + 0.077, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.111, + 1.366, + 3.151, + 4.598, + 5.679, + 6.43, + 6.818, + 6.817, + 6.482, + 5.703, + 4.547, + 3.04, + 1.256, + 0.074, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.102, + 1.35, + 3.088, + 4.521, + 5.584, + 6.338, + 6.715, + 6.699, + 6.291, + 5.508, + 4.358, + 2.931, + 1.217, + 0.068, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.487, + 0.081, + 3.773, + 5.667, + 5.713, + 5.981, + 6.055, + 6.37, + 5.615, + 4.455, + 2.982, + 1.223, + 0.064, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.098, + 1.304, + 3.074, + 4.506, + 5.589, + 6.367, + 6.802, + 6.822, + 6.441, + 5.689, + 4.532, + 3.048, + 1.233, + 0.055, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.079, + 1.348, + 3.165, + 4.607, + 5.658, + 6.388, + 6.727, + 6.738, + 6.401, + 5.651, + 4.499, + 2.987, + 1.193, + 0.049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.079, + 1.31, + 3.098, + 4.55, + 5.646, + 6.374, + 6.767, + 6.74, + 5.057, + 5.571, + 4.399, + 2.91, + 1.173, + 0.049, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.077, + 1.276, + 3.061, + 4.564, + 5.73, + 6.557, + 6.992, + 7.025, + 6.601, + 5.802, + 4.596, + 3.075, + 1.212, + 0.046, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.074, + 1.381, + 3.345, + 4.969, + 6.183, + 7.035, + 7.434, + 7.382, + 6.958, + 6.09, + 4.819, + 3.176, + 1.231, + 0.03, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.052, + 1.371, + 3.308, + 4.864, + 6.029, + 6.803, + 7.22, + 7.213, + 6.782, + 5.946, + 4.708, + 3.113, + 1.199, + 0.031, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.051, + 1.369, + 3.321, + 4.848, + 5.963, + 6.679, + 7.109, + 7.14, + 6.75, + 5.939, + 4.727, + 3.133, + 1.198, + 0.026, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.045, + 1.34, + 3.272, + 4.809, + 5.963, + 6.745, + 7.172, + 7.198, + 6.776, + 5.961, + 4.723, + 3.117, + 1.187, + 0.027, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.039, + 1.328, + 3.233, + 4.744, + 5.899, + 6.688, + 7.114, + 7.138, + 6.727, + 5.915, + 4.695, + 3.08, + 1.151, + 0.04, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.044, + 1.306, + 3.207, + 4.786, + 6.005, + 6.81, + 7.215, + 7.174, + 6.77, + 5.916, + 4.67, + 3.046, + 1.119, + 0.035, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.038, + 1.234, + 3.08, + 4.583, + 5.72, + 6.475, + 6.838, + 6.81, + 6.415, + 5.579, + 4.384, + 2.861, + 1.035, + 0.028, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.037, + 1.212, + 3.041, + 4.536, + 5.614, + 6.362, + 6.755, + 6.756, + 6.392, + 5.599, + 4.41, + 2.839, + 1.01, + 0.023, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.032, + 1.182, + 2.987, + 4.448, + 5.345, + 5.165, + 6.725, + 6.696, + 5.369, + 4.199, + 3.83, + 2.542, + 0.876, + 0.012, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.027, + 1.132, + 2.963, + 4.442, + 5.54, + 6.259, + 6.64, + 6.636, + 6.243, + 5.457, + 4.249, + 2.62, + 0.928, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.023, + 1.136, + 2.933, + 4.386, + 5.46, + 6.124, + 6.496, + 6.486, + 6.092, + 5.307, + 4.106, + 2.535, + 0.887, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035, + 1.114, + 2.903, + 4.375, + 5.48, + 6.28, + 6.668, + 6.676, + 6.29, + 5.479, + 4.262, + 2.662, + 0.908, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.035, + 1.139, + 2.969, + 4.507, + 5.655, + 6.455, + 6.857, + 6.86, + 6.438, + 5.605, + 4.392, + 2.77, + 0.914, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.041, + 0.991, + 3.075, + 4.656, + 5.268, + 6.635, + 6.437, + 6.996, + 6.57, + 5.705, + 4.455, + 2.796, + 0.907, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.031, + 1.203, + 3.146, + 4.696, + 5.815, + 6.55, + 6.948, + 6.952, + 6.499, + 5.66, + 4.411, + 2.745, + 0.87, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.025, + 1.161, + 3.049, + 4.605, + 5.73, + 6.45, + 6.788, + 6.756, + 6.339, + 5.5, + 4.276, + 2.631, + 0.822, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.02, + 1.129, + 3.026, + 4.6, + 5.748, + 6.515, + 6.876, + 6.802, + 6.395, + 5.523, + 4.254, + 2.622, + 0.803, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.021, + 1.147, + 3.112, + 4.741, + 5.945, + 6.723, + 7.122, + 7.069, + 6.601, + 5.716, + 4.432, + 2.731, + 0.82, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.015, + 1.13, + 3.027, + 4.549, + 5.702, + 6.481, + 6.861, + 6.822, + 6.42, + 5.55, + 4.285, + 2.62, + 0.771, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.009, + 1.035, + 2.81, + 4.366, + 5.551, + 6.343, + 6.735, + 6.721, + 5.453, + 4.691, + 3.557, + 2.408, + 0.706, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.991, + 2.724, + 3.961, + 4.913, + 6.183, + 5.741, + 5.412, + 5.327, + 1.556, + 0.963, + 2.122, + 0.68, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.986, + 2.785, + 4.289, + 5.427, + 6.234, + 6.628, + 6.601, + 6.192, + 5.35, + 4.084, + 2.438, + 0.662, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.009, + 2.845, + 4.278, + 5.321, + 6.086, + 6.487, + 6.483, + 6.086, + 5.259, + 4.044, + 2.395, + 0.631, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.002, + 2.807, + 4.18, + 5.187, + 5.86, + 6.159, + 6.132, + 5.788, + 3.638, + 2.377, + 2.093, + 0.602, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.394, + 2.751, + 4.237, + 5.359, + 6.182, + 6.578, + 6.541, + 3.059, + 0.324, + 3.932, + 0.587, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.925, + 2.619, + 4.03, + 5.085, + 5.893, + 6.228, + 6.208, + 5.833, + 4.435, + 3.344, + 2.365, + 0.582, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.021, + 2.902, + 4.375, + 5.505, + 6.265, + 6.664, + 6.66, + 6.228, + 5.359, + 4.066, + 2.338, + 0.559, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.011, + 2.92, + 4.335, + 5.282, + 6.064, + 6.445, + 1.812, + 0.201, + 0.157, + 3.974, + 2.269, + 0.527, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.961, + 2.811, + 4.334, + 5.477, + 6.226, + 6.574, + 6.512, + 2.344, + 1.95, + 0.473, + 1.586, + 0.509, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.937, + 2.813, + 4.295, + 5.416, + 6.148, + 6.463, + 6.388, + 5.927, + 5.042, + 3.795, + 2.11, + 0.476, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.915, + 2.725, + 4.237, + 5.314, + 6.028, + 6.328, + 6.246, + 5.78, + 4.932, + 1.536, + 2.059, + 0.191, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.905, + 2.705, + 4.254, + 5.357, + 6.138, + 6.502, + 6.47, + 6.024, + 5.128, + 3.824, + 2.101, + 0.424, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.902, + 2.723, + 4.254, + 5.392, + 6.18, + 6.551, + 6.523, + 6.064, + 5.123, + 3.76, + 2.038, + 0.395, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.956, + 2.94, + 4.627, + 5.827, + 6.617, + 6.961, + 6.876, + 6.413, + 5.449, + 4.071, + 2.182, + 0.406, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.961, + 2.968, + 4.686, + 5.906, + 6.697, + 7.061, + 6.938, + 6.413, + 5.443, + 4.051, + 2.177, + 0.384, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.924, + 2.839, + 4.418, + 5.586, + 6.419, + 6.806, + 6.747, + 6.253, + 5.332, + 3.987, + 2.129, + 0.355, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.899, + 2.847, + 4.432, + 5.55, + 6.276, + 6.536, + 6.348, + 5.766, + 4.853, + 3.645, + 1.959, + 0.314, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.855, + 2.757, + 4.309, + 5.385, + 6.088, + 6.345, + 6.178, + 5.589, + 4.735, + 3.547, + 1.88, + 0.295, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.814, + 2.677, + 4.243, + 5.373, + 6.117, + 6.477, + 6.425, + 5.906, + 4.943, + 3.574, + 1.725, + 0.234, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.784, + 2.514, + 4.116, + 5.325, + 6.251, + 6.602, + 6.498, + 6.005, + 4.968, + 3.515, + 1.846, + 0.258, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.892, + 2.948, + 4.768, + 6.087, + 6.991, + 7.364, + 7.225, + 6.648, + 5.562, + 4.058, + 2.058, + 0.254, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.927, + 3.074, + 4.894, + 6.221, + 7.048, + 7.4, + 7.25, + 6.615, + 5.551, + 4.077, + 2.046, + 0.234, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.904, + 3.006, + 4.797, + 6.041, + 6.844, + 7.156, + 6.97, + 6.366, + 5.336, + 3.897, + 1.961, + 0.194, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.864, + 2.885, + 4.546, + 5.681, + 6.379, + 6.643, + 6.483, + 5.904, + 5.005, + 3.693, + 1.834, + 0.158, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.8, + 2.694, + 4.416, + 5.682, + 6.545, + 6.906, + 6.821, + 6.258, + 5.254, + 3.782, + 1.819, + 0.13, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.84, + 2.892, + 4.64, + 5.814, + 6.53, + 6.783, + 6.587, + 5.978, + 5.009, + 3.632, + 1.773, + 0.112, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.804, + 2.761, + 4.415, + 5.625, + 6.402, + 6.751, + 6.637, + 6.036, + 5.01, + 3.565, + 1.666, + 0.096, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.734, + 2.535, + 4.181, + 5.47, + 6.506, + 6.91, + 6.815, + 6.233, + 5.212, + 3.748, + 1.751, + 0.095, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.81, + 2.908, + 4.739, + 6.018, + 6.819, + 7.138, + 6.961, + 6.328, + 5.25, + 3.728, + 1.704, + 0.077, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.792, + 2.847, + 4.628, + 5.854, + 6.597, + 6.876, + 6.666, + 6.037, + 4.992, + 3.549, + 1.619, + 0.06, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.763, + 2.805, + 4.546, + 5.736, + 6.49, + 6.76, + 6.55, + 5.918, + 4.916, + 3.488, + 1.569, + 0.056, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.705, + 2.61, + 4.244, + 5.413, + 6.214, + 6.56, + 6.455, + 5.937, + 4.942, + 3.485, + 1.536, + 0.046, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.733, + 2.709, + 4.372, + 5.528, + 6.252, + 6.538, + 6.377, + 5.825, + 4.851, + 3.415, + 1.492, + 0.033, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.568, + 2.35, + 3.547, + 5.517, + 5.496, + 5.217, + 5.382, + 3.851, + 1.914, + 3.427, + 1.478, + 0.024, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.652, + 2.52, + 4.124, + 5.231, + 5.519, + 5.785, + 5.587, + 4.824, + 3.595, + 2.368, + 0.766, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.645, + 2.53, + 4.202, + 4.792, + 5.615, + 5.34, + 3.404, + 4.069, + 2.459, + 2.359, + 0.453, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.633, + 2.487, + 4.052, + 5.223, + 5.987, + 6.328, + 6.244, + 5.678, + 4.663, + 3.191, + 1.295, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.367, + 2.22, + 4.094, + 5.243, + 6.003, + 6.333, + 6.235, + 5.669, + 4.643, + 3.166, + 1.267, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.601, + 2.483, + 4.199, + 5.399, + 6.209, + 6.525, + 6.42, + 5.799, + 4.721, + 3.171, + 1.24, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.586, + 2.523, + 4.338, + 5.622, + 6.429, + 6.753, + 6.602, + 5.974, + 3.695, + 2.342, + 0.117, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.524, + 0.522, + 2.081, + 5.721, + 3.326, + 6.845, + 6.67, + 1.407, + 1.984, + 3.326, + 0.031, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.621, + 2.715, + 4.589, + 5.853, + 6.615, + 6.922, + 0.968, + 2.175, + 0.129, + 0.199, + 0.762, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.605, + 2.658, + 4.516, + 5.749, + 6.481, + 6.738, + 6.511, + 5.833, + 4.75, + 3.136, + 1.148, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.572, + 2.561, + 4.371, + 5.566, + 6.306, + 6.541, + 6.339, + 5.704, + 4.658, + 3.112, + 1.119, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.554, + 2.546, + 4.305, + 5.453, + 6.055, + 6.21, + 6.013, + 5.438, + 4.459, + 2.992, + 1.073, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.523, + 2.452, + 4.169, + 5.362, + 5.191, + 5.37, + 6.18, + 5.513, + 4.422, + 2.86, + 0.989, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.499, + 2.426, + 4.217, + 5.403, + 6.087, + 6.314, + 6.111, + 5.467, + 4.423, + 2.871, + 0.958, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.494, + 2.443, + 4.217, + 5.418, + 6.13, + 6.392, + 6.202, + 5.552, + 4.46, + 2.883, + 0.964, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.486, + 2.422, + 4.167, + 5.298, + 5.932, + 6.087, + 5.806, + 5.182, + 4.249, + 2.786, + 0.917, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.46, + 2.328, + 3.981, + 4.336, + 5.141, + 5.936, + 5.147, + 4.279, + 4.276, + 2.405, + 0.842, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.416, + 2.102, + 3.812, + 5.01, + 5.717, + 5.987, + 5.82, + 5.333, + 4.27, + 2.68, + 0.791, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.413, + 2.26, + 3.982, + 5.159, + 5.927, + 6.241, + 6.075, + 5.449, + 4.367, + 2.743, + 0.812, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.406, + 2.324, + 4.116, + 5.328, + 6.061, + 6.294, + 6.041, + 5.348, + 4.269, + 2.669, + 0.782, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.4, + 2.341, + 4.176, + 5.379, + 6.094, + 6.312, + 6.053, + 5.342, + 4.275, + 2.683, + 0.766, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.371, + 2.295, + 4.045, + 5.151, + 5.91, + 6.229, + 6.088, + 5.43, + 4.333, + 2.683, + 0.714, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.342, + 2.247, + 4.035, + 5.216, + 5.91, + 6.137, + 5.896, + 5.27, + 4.232, + 2.617, + 0.67, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.315, + 2.205, + 3.997, + 5.152, + 5.793, + 5.975, + 5.726, + 5.104, + 4.081, + 2.512, + 0.64, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.293, + 2.198, + 4.024, + 5.222, + 5.96, + 6.221, + 6.003, + 5.337, + 4.225, + 2.554, + 0.656, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.272, + 2.178, + 4.013, + 5.175, + 5.877, + 6.107, + 5.858, + 5.204, + 4.12, + 2.494, + 0.61, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.223, + 1.992, + 3.752, + 4.949, + 5.715, + 5.974, + 5.748, + 4.606, + 2.4, + 1.566, + 0.365, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.206, + 1.972, + 3.75, + 5.007, + 5.772, + 6.04, + 5.8, + 5.122, + 3.909, + 2.236, + 0.489, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.201, + 2.011, + 3.916, + 5.241, + 6.07, + 6.432, + 6.282, + 5.607, + 4.45, + 2.628, + 0.604, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.225, + 2.22, + 4.19, + 5.45, + 6.195, + 6.414, + 6.148, + 5.466, + 4.32, + 2.574, + 0.576, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.211, + 2.194, + 4.137, + 5.396, + 6.126, + 6.338, + 6.066, + 5.323, + 4.174, + 2.457, + 0.53, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.19, + 2.108, + 4.003, + 5.201, + 5.941, + 6.164, + 5.928, + 5.231, + 4.095, + 2.379, + 0.486, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.173, + 2.062, + 3.943, + 5.126, + 5.785, + 5.98, + 5.724, + 3.619, + 3.603, + 1.876, + 0.448, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.163, + 2.009, + 3.86, + 3.804, + 5.556, + 5.826, + 5.663, + 5.054, + 3.994, + 2.292, + 0.221, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.14, + 1.958, + 3.848, + 5.184, + 5.232, + 3.912, + 2.951, + 5.238, + 3.057, + 2.105, + 0.348, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.109, + 1.88, + 3.778, + 5.056, + 5.819, + 6.038, + 5.808, + 5.189, + 4.07, + 2.319, + 0.39, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.131, + 2.047, + 4.022, + 5.35, + 6.143, + 6.409, + 6.142, + 5.406, + 4.174, + 2.356, + 0.368, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.115, + 1.965, + 3.88, + 5.172, + 5.933, + 6.186, + 5.935, + 5.215, + 4.038, + 2.227, + 0.316, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.086, + 1.84, + 3.714, + 4.986, + 5.747, + 6.02, + 5.776, + 5.084, + 3.912, + 2.175, + 0.285, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.074, + 1.794, + 3.654, + 4.889, + 5.594, + 5.798, + 5.556, + 4.892, + 3.813, + 2.142, + 0.269, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.067, + 1.776, + 3.593, + 4.779, + 5.445, + 5.711, + 5.519, + 4.883, + 3.786, + 2.094, + 0.255, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.039, + 1.729, + 3.562, + 4.79, + 5.493, + 5.711, + 5.454, + 4.789, + 3.676, + 1.998, + 0.219, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.043, + 1.675, + 3.479, + 4.571, + 5.234, + 5.577, + 4.199, + 4.827, + 3.722, + 2.011, + 0.218, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.695, + 3.573, + 4.851, + 5.649, + 5.919, + 5.707, + 5.001, + 3.83, + 2.049, + 0.206, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.437, + 3.24, + 4.605, + 5.473, + 5.752, + 5.544, + 3.571, + 3.577, + 1.856, + 0.032, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.432, + 2.188, + 4.6, + 5.437, + 5.736, + 5.546, + 4.895, + 3.748, + 2.0, + 0.196, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.773, + 2.218, + 4.615, + 5.379, + 4.762, + 4.159, + 3.356, + 2.764, + 1.367, + 0.031, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.234, + 3.312, + 3.117, + 5.48, + 5.804, + 5.628, + 4.962, + 3.785, + 1.988, + 0.123, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.447, + 3.322, + 4.675, + 5.464, + 5.763, + 5.56, + 4.868, + 3.684, + 1.925, + 0.155, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.63, + 3.662, + 5.109, + 5.922, + 6.193, + 5.933, + 5.21, + 3.977, + 2.09, + 0.177, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.529, + 3.474, + 4.841, + 5.648, + 5.917, + 5.691, + 4.964, + 3.778, + 1.658, + 0.086, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.726, + 2.311, + 4.774, + 4.355, + 4.86, + 3.059, + 2.263, + 1.036, + 1.621, + 0.073, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.344, + 1.811, + 4.506, + 3.901, + 4.119, + 1.709, + 4.825, + 3.64, + 1.865, + 0.111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.403, + 3.247, + 4.57, + 5.382, + 4.8, + 4.008, + 3.482, + 1.688, + 0.643, + 0.011, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.352, + 3.237, + 4.636, + 5.387, + 5.647, + 5.419, + 4.731, + 3.567, + 1.83, + 0.113, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.615, + 2.208, + 3.206, + 5.232, + 5.566, + 5.379, + 4.728, + 3.557, + 1.311, + 0.073, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.372, + 3.343, + 4.77, + 5.626, + 5.939, + 5.714, + 4.995, + 3.755, + 1.933, + 0.08, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.607, + 3.251, + 4.655, + 5.444, + 5.771, + 5.588, + 4.926, + 3.737, + 1.937, + 0.119, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.604, + 3.237, + 4.548, + 5.256, + 5.594, + 5.431, + 4.768, + 3.579, + 1.85, + 0.109, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.628, + 3.156, + 4.477, + 5.206, + 5.402, + 5.189, + 4.608, + 3.492, + 1.829, + 0.114, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.508, + 1.939, + 3.161, + 4.31, + 4.215, + 3.933, + 4.381, + 3.381, + 1.751, + 0.09, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.51, + 1.996, + 4.332, + 5.192, + 5.564, + 5.406, + 4.793, + 3.607, + 1.875, + 0.109, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.151, + 3.006, + 4.402, + 5.221, + 5.577, + 5.401, + 4.759, + 3.555, + 0.899, + 0.01, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.148, + 1.258, + 1.942, + 0.118, + 0.665, + 0.25, + 0.314, + 0.86, + 0.543, + 0.096, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.034, + 2.862, + 3.487, + 4.202, + 4.06, + 4.254, + 3.018, + 1.286, + 0.198, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.352, + 0.844, + 0.792, + 1.25, + 3.356, + 3.212, + 3.629, + 2.666, + 1.711, + 0.052, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.0, + 0.048, + 4.376, + 2.94, + 3.559, + 3.84, + 1.912, + 0.055, + 1.822, + 0.047, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.026, + 3.01, + 4.559, + 5.439, + 5.81, + 5.64, + 4.978, + 3.739, + 1.884, + 0.054, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 1.025, + 2.901, + 4.333, + 5.167, + 5.537, + 4.388, + 4.758, + 2.549, + 1.398, + 0.085, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.965, + 2.89, + 4.391, + 5.234, + 5.59, + 5.417, + 3.4, + 3.561, + 1.818, + 0.087, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.967, + 2.94, + 4.461, + 5.37, + 5.738, + 5.552, + 4.889, + 3.662, + 1.854, + 0.092, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.958, + 2.969, + 4.504, + 4.93, + 4.999, + 5.503, + 3.96, + 3.64, + 1.894, + 0.102, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.906, + 2.825, + 4.324, + 5.224, + 5.641, + 5.556, + 2.018, + 1.354, + 1.851, + 0.092, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.851, + 2.81, + 3.419, + 3.097, + 5.57, + 0.267, + 1.832, + 0.727, + 1.028, + 0.073, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.88, + 2.848, + 4.437, + 5.356, + 5.765, + 5.612, + 4.927, + 3.709, + 1.919, + 0.108, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.876, + 2.866, + 4.431, + 5.353, + 5.725, + 5.558, + 4.906, + 3.699, + 1.921, + 0.115, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.816, + 1.515, + 4.248, + 5.07, + 5.35, + 5.256, + 4.677, + 3.559, + 1.859, + 0.108, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.724, + 1.63, + 4.266, + 3.856, + 3.948, + 3.7, + 0.742, + 2.73, + 1.9, + 0.067, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.795, + 2.801, + 4.411, + 5.379, + 5.807, + 5.684, + 5.045, + 3.833, + 2.018, + 0.152, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.813, + 2.789, + 4.338, + 5.22, + 5.581, + 5.432, + 4.823, + 3.68, + 1.956, + 0.078, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.585, + 0.687, + 4.162, + 4.14, + 4.278, + 5.368, + 4.367, + 3.664, + 1.937, + 0.148, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.758, + 2.755, + 4.315, + 5.204, + 5.564, + 5.422, + 4.802, + 3.682, + 1.974, + 0.151, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.722, + 2.67, + 4.202, + 4.955, + 5.259, + 5.2, + 4.645, + 3.548, + 1.886, + 0.126, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.292, + 1.433, + 2.394, + 4.336, + 5.469, + 4.282, + 4.94, + 3.801, + 2.026, + 0.138, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.643, + 2.52, + 4.135, + 5.036, + 4.183, + 5.389, + 4.8, + 3.669, + 1.956, + 0.161, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.658, + 2.58, + 4.146, + 5.051, + 5.455, + 5.343, + 2.893, + 3.059, + 0.852, + 0.035, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.627, + 2.508, + 4.129, + 5.038, + 5.455, + 5.354, + 4.788, + 3.286, + 1.961, + 0.111, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.693, + 2.726, + 4.38, + 5.35, + 5.744, + 4.543, + 3.439, + 2.669, + 1.055, + 0.059, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.679, + 2.696, + 4.333, + 5.256, + 4.721, + 4.934, + 4.959, + 3.847, + 2.149, + 0.238, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.618, + 2.544, + 4.121, + 3.966, + 4.29, + 3.978, + 3.295, + 2.405, + 1.072, + 0.064, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.171, + 0.951, + 1.411, + 2.679, + 3.914, + 4.388, + 3.093, + 1.714, + 2.029, + 0.147, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.08, + 1.72, + 3.056, + 2.693, + 1.442, + 1.342, + 0.403, + 0.919, + 0.727, + 0.039, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.153, + 0.07, + 1.405, + 0.776, + 1.148, + 0.459, + 1.013, + 2.81, + 0.545, + 0.219, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.496, + 0.39, + 1.828, + 0.494, + 1.394, + 1.412, + 1.206, + 0.859, + 0.728, + 0.05, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.507, + 2.355, + 3.984, + 5.036, + 5.489, + 4.157, + 3.552, + 3.837, + 1.602, + 0.335, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "size_kw": 10.0, + "name": "roof_east", + "annual_energy_produced_kwh": 16714.41, + "year_one_energy_produced_kwh": 17487.0, + "annual_energy_exported_kwh": 0.0, + "electric_to_storage_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "electric_curtailed_series_kw": [ + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0, + 0.0 + ], + "lifecycle_om_cost_after_tax": 1564.0, + "lcoe_per_kwh": 0.0594 + } + ], + "Financial": { + "net_present_cost": 0.0, + "lifecycle_om_costs_before_tax_bau": 14793.9232, + "lcc": 2.4288865985e6, + "lifecycle_om_costs_after_tax": 19027.8031, + "year_one_om_costs_before_tax": 1946.6667, + "lifecycle_generation_tech_capital_costs": 45554.4483, + "lifecycle_offgrid_other_annual_costs_after_tax": 0.0, + "replacements_present_cost_after_tax": 29880.1042, + "lifecycle_outage_cost": 37487.7383, + "initial_capital_costs_after_incentives": 112040.9982, + "lifecycle_MG_upgrade_and_fuel_cost": 0.0, + "lifecycle_elecbill_after_tax": 2.2304499547e6, + "lifecycle_storage_capital_costs": 96366.6541, + "offtaker_annual_free_cashflows": [ + -207302.28, + -82003.36, + -179080.34, + -184035.54, + -188866.68, + -193637.69, + -198118.35, + -202699.91, + -207880.57, + -213168.04, + -284399.42, + -223093.9, + -228228.84, + -233481.98, + -238856.04, + -244353.8, + -249978.11, + -255731.88, + -261618.1, + -267639.81, + -273800.13, + -280102.26, + -286549.45, + -293145.04, + -299892.46, + -306795.2 + ], + "year_one_om_costs_before_tax_bau": 1120.0, + "lifecycle_offgrid_other_capital_costs": 0.0, + "lifecycle_emissions_cost_health_bau": 48796.67, + "om_and_replacement_present_cost_after_tax": 48907.9073, + "lifecycle_fuel_costs_after_tax_bau": 0.0, + "replacements_future_cost_after_tax": 89626.194, + "developer_annual_free_cashflows": [], + "developer_om_and_replacement_present_cost_after_tax": 48907.9073, + "lifecycle_emissions_cost_climate_bau": 29288.99, + "offtaker_discounted_annual_free_cashflows": [ + -207302.28, + -75718.71, + -152683.11, + -144882.63, + -137290.83, + -129971.34, + -122787.45, + -115999.03, + -109846.51, + -104007.82, + -128128.03, + -92805.7, + -87665.57, + -82810.12, + -78223.61, + -73891.12, + -69798.59, + -65932.74, + -62281.0, + -58831.52, + -55573.09, + -52495.13, + -49587.65, + -46841.2, + -44246.87, + -41796.23 + ], + "lcc_bau": 2.5988498648e6, + "lifecycle_capital_costs_plus_om_after_tax": 160948.9055, + "lifecycle_emissions_cost_health": 44202.55, + "initial_capital_costs": 207302.2781, + "lifecycle_om_costs_after_tax_bau": 10947.5032, + "lifecycle_om_costs_before_tax": 25713.2475, + "annualized_payment_to_third_party": 0.0, + "offtaker_annual_free_cashflows_bau": [ + 0.0, + -200094.22, + -204698.09, + -209407.89, + -214226.05, + -219155.08, + -224197.53, + -229355.99, + -234633.15, + -240031.73, + -245554.53, + -251204.41, + -256984.28, + -262897.15, + -268946.07, + -275134.17, + -281464.66, + -287940.81, + -294565.97, + -301343.57, + -308277.12, + -315370.21, + -322626.51, + -330049.77, + -337643.84, + -345412.65 + ], + "lifecycle_emissions_cost_climate": 26478.04, + "lifecycle_fuel_costs_after_tax": 0.0, + "lifecycle_chp_standby_cost_after_tax_bau": 0.0, + "lifecycle_production_incentive_after_tax_bau": 0.0, + "offtaker_discounted_annual_free_cashflows_bau": [ + 0.0, + -184759.21, + -174524.69, + -164857.1, + -155725.04, + -147098.85, + -138950.49, + -131253.5, + -123982.88, + -117115.01, + -110627.57, + -104499.5, + -98710.89, + -93242.94, + -88077.87, + -83198.92, + -78590.23, + -74236.84, + -70124.59, + -66240.14, + -62570.87, + -59104.84, + -55830.82, + -52738.16, + -49816.81, + -47057.28 + ], + "lifecycle_capital_costs": 141921.1024, + "lifecycle_production_incentive_after_tax": 0.0, + "npv": 169963.27, + "internal_rate_of_return": 0.19, + "lifecycle_elecbill_after_tax_bau": 2.5219879993e6, + "lifecycle_MG_upgrade_and_fuel_cost_bau": 0.0, + "simple_payback_years": 4.5, + "year_one_om_costs_after_tax": 1440.5333, + "lifecycle_outage_cost_bau": 65914.3623, + "lifecycle_chp_standby_cost_after_tax": 0.0 + } } diff --git a/test/ac_dc_pvs_results_baseline.json b/test/ac_dc_pvs_results_baseline.json deleted file mode 100644 index 967740c85..000000000 --- a/test/ac_dc_pvs_results_baseline.json +++ /dev/null @@ -1,202426 +0,0 @@ -{ - "Site": { - "annual_emissions_from_fuelburn_tonnes_PM25": 0.0, - "lifecycle_emissions_tonnes_CO2_bau": 10653.83, - "annual_emissions_tonnes_CO2_bau": 495.07, - "lifecycle_emissions_reduction_CO2_fraction": 0.08563586991720352, - "lifecycle_emissions_tonnes_PM25": 0.54, - "lifecycle_emissions_tonnes_PM25_bau": 0.6, - "annual_emissions_from_fuelburn_tonnes_NOx_bau": 0.0, - "lifecycle_emissions_tonnes_SO2": 0.63, - "lifecycle_emissions_from_fuelburn_tonnes_PM25": 0.0, - "annual_emissions_tonnes_SO2_bau": 0.03, - "annual_emissions_from_fuelburn_tonnes_NOx": 0.0, - "lifecycle_emissions_from_fuelburn_tonnes_SO2_bau": 0.0, - "annual_emissions_tonnes_NOx": 0.13, - "renewable_electricity_fraction_bau": 0.040913, - "annual_emissions_tonnes_SO2": 0.03, - "annual_emissions_tonnes_PM25": 0.03, - "total_renewable_energy_fraction_bau": 0.040913, - "lifecycle_emissions_from_fuelburn_tonnes_CO2_bau": 0.0, - "lifecycle_emissions_tonnes_NOx": 2.84, - "annual_emissions_from_fuelburn_tonnes_CO2": 0.0, - "annual_emissions_from_fuelburn_tonnes_CO2_bau": 0.0, - "annual_emissions_tonnes_PM25_bau": 0.03, - "total_renewable_energy_fraction": 0.179195, - "annual_emissions_from_fuelburn_tonnes_SO2": 0.0, - "lifecycle_emissions_from_fuelburn_tonnes_NOx_bau": 0.0, - "lifecycle_emissions_from_fuelburn_tonnes_SO2": 0.0, - "annual_renewable_electricity_kwh_bau": 45938.78, - "renewable_electricity_fraction": 0.179195, - "lifecycle_emissions_tonnes_NOx_bau": 3.11, - "lifecycle_emissions_tonnes_SO2_bau": 0.69, - "lifecycle_emissions_from_fuelburn_tonnes_CO2": 0.0, - "annual_emissions_from_fuelburn_tonnes_PM25_bau": 0.0, - "annual_emissions_from_fuelburn_tonnes_SO2_bau": 0.0, - "lifecycle_emissions_from_fuelburn_tonnes_PM25_bau": 0.0, - "annual_emissions_tonnes_NOx_bau": 0.14, - "lifecycle_emissions_from_fuelburn_tonnes_NOx": 0.0, - "annual_renewable_electricity_kwh": 201205.81, - "annual_emissions_tonnes_CO2": 452.67, - "lifecycle_emissions_tonnes_CO2": 9741.48 - }, - "Outages": { - "expected_outage_cost": 38003.69101517182, - "electric_storage_microgrid_upgraded": true, - "unserved_load_per_outage_kwh": [ - [ - 2934.9 - ] - ], - "pv_microgrid_size_kw": 121.6667, - "pv_to_storage_series_kw": [ - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 2.467 - ] - ], - [ - [ - 7.593 - ] - ], - [ - [ - 27.479 - ] - ], - [ - [ - 14.63 - ] - ], - [ - [ - 21.782 - ] - ], - [ - [ - 4.668 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ] - ], - "critical_loads_per_outage_series_kw": [ - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 35.7032525087 - ] - ], - [ - [ - 39.13324098535 - ] - ], - [ - [ - 65.73176077400001 - ] - ], - [ - [ - 98.6273313215 - ] - ], - [ - [ - 98.5803765585 - ] - ], - [ - [ - 98.5217491685 - ] - ], - [ - [ - 98.5224687115 - ] - ], - [ - [ - 98.5364321545 - ] - ], - [ - [ - 98.536721342 - ] - ], - [ - [ - 98.3879792935 - ] - ], - [ - [ - 100.0259452265 - ] - ], - [ - [ - 108.680057484 - ] - ], - [ - [ - 84.6323553725 - ] - ], - [ - [ - 84.696616961 - ] - ], - [ - [ - 75.87522944749999 - ] - ], - [ - [ - 30.45418713595 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 16.06619674345 - ] - ], - [ - [ - 16.4401459875 - ] - ], - [ - [ - 16.42034179565 - ] - ], - [ - [ - 16.5319430043 - ] - ], - [ - [ - 35.5986135471 - ] - ], - [ - [ - 30.8088586586 - ] - ], - [ - [ - 47.996797263800005 - ] - ], - [ - [ - 74.0402767375 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 99.7876786385 - ] - ], - [ - [ - 108.353473262 - ] - ], - [ - [ - 75.3876981175 - ] - ], - [ - [ - 57.674028539999995 - ] - ], - [ - [ - 57.684197782999995 - ] - ], - [ - [ - 40.10646857055 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 16.0157476851 - ] - ], - [ - [ - 16.030614242 - ] - ], - [ - [ - 16.0572089538 - ] - ], - [ - [ - 5.697231791 - ] - ], - [ - [ - 30.045383660949998 - ] - ], - [ - [ - 29.6814054141 - ] - ], - [ - [ - 56.2519097805 - ] - ], - [ - [ - 56.2519097805 - ] - ], - [ - [ - 73.965579358 - ] - ], - [ - [ - 73.965579358 - ] - ], - [ - [ - 73.965579358 - ] - ], - [ - [ - 73.965579358 - ] - ], - [ - [ - 75.67873828249999 - ] - ], - [ - [ - 66.5308633285 - ] - ], - [ - [ - 48.817193751199994 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 35.793373751 - ] - ], - [ - [ - 39.14933736705 - ] - ], - [ - [ - 65.4495116485 - ] - ], - [ - [ - 98.08212518399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 98.07451971399999 - ] - ], - [ - [ - 99.7876786385 - ] - ], - [ - [ - 108.353473262 - ] - ], - [ - [ - 84.244532906 - ] - ], - [ - [ - 84.244532906 - ] - ], - [ - [ - 75.3876981175 - ] - ], - [ - [ - 30.45418713595 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ] - ], - "pv_microgrid_upgrade_cost": 0.0, - "max_outage_cost_per_outage_duration": [ - 38003.69101517182 - ], - "unserved_load_series_kw": [ - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 35.7032525087 - ] - ], - [ - [ - 4.4985749249905425 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 38.954240578951485 - ] - ], - [ - [ - 25.215782278447378 - ] - ], - [ - [ - 18.46897149460871 - ] - ], - [ - [ - 18.526527228529417 - ] - ], - [ - [ - 38.47081039497125 - ] - ], - [ - [ - 57.809153953554144 - ] - ], - [ - [ - 56.7607599028973 - ] - ], - [ - [ - 94.84041781498684 - ] - ], - [ - [ - 108.680057484 - ] - ], - [ - [ - 84.6323553725 - ] - ], - [ - [ - 84.696616961 - ] - ], - [ - [ - 43.99892355189999 - ] - ], - [ - [ - 30.45418713595 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 16.06619674345 - ] - ], - [ - [ - 16.4401459875 - ] - ], - [ - [ - 16.42034179565 - ] - ], - [ - [ - 16.5319430043 - ] - ], - [ - [ - 35.5986135471 - ] - ], - [ - [ - 27.545618904499626 - ] - ], - [ - [ - 8.992402886784191 - ] - ], - [ - [ - 15.780079410714663 - ] - ], - [ - [ - 47.66268221460136 - ] - ], - [ - [ - 48.483197172743154 - ] - ], - [ - [ - 36.54749512535171 - ] - ], - [ - [ - 25.114796075762854 - ] - ], - [ - [ - 37.42444801644768 - ] - ], - [ - [ - 24.598784868702396 - ] - ], - [ - [ - 88.85549108487504 - ] - ], - [ - [ - 108.353473262 - ] - ], - [ - [ - 75.3876981175 - ] - ], - [ - [ - 57.674028539999995 - ] - ], - [ - [ - 57.684197782999995 - ] - ], - [ - [ - 40.10646857055 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 16.0157476851 - ] - ], - [ - [ - 16.030614242 - ] - ], - [ - [ - 16.0572089538 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 3.552713678800501e-15 - ] - ], - [ - [ - 3.552713678800501e-15 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 13.438481755355632 - ] - ], - [ - [ - 0.9567510014497458 - ] - ], - [ - [ - 64.50725185406851 - ] - ], - [ - [ - 66.5308633285 - ] - ], - [ - [ - 48.817193751199994 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 15.938152947799999 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 35.793373751 - ] - ], - [ - [ - 30.509936857109146 - ] - ], - [ - [ - 25.36579835636666 - ] - ], - [ - [ - 4.641551207752826 - ] - ], - [ - [ - 21.587254811716633 - ] - ], - [ - [ - 13.769712185780705 - ] - ], - [ - [ - 13.496360661803237 - ] - ], - [ - [ - 19.900055645888102 - ] - ], - [ - [ - 32.82177591806004 - ] - ], - [ - [ - 21.53986100962777 - ] - ], - [ - [ - 86.83480344212165 - ] - ], - [ - [ - 108.353473262 - ] - ], - [ - [ - 84.244532906 - ] - ], - [ - [ - 84.244532906 - ] - ], - [ - [ - 63.96130186104654 - ] - ], - [ - [ - 30.45418713595 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ], - [ - [ - 16.553543950349997 - ] - ] - ], - "soc_series_fraction": [ - [ - [ - 1.0 - ] - ], - [ - [ - 1.0 - ] - ], - [ - [ - 1.0 - ] - ], - [ - [ - 1.0 - ] - ], - [ - [ - 0.84 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.707 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.547 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.387 - ] - ], - [ - [ - 0.398 - ] - ], - [ - [ - 0.432 - ] - ], - [ - [ - 0.556 - ] - ], - [ - [ - 0.622 - ] - ], - [ - [ - 0.721 - ] - ], - [ - [ - 0.742 - ] - ], - [ - [ - 0.737 - ] - ], - [ - [ - 0.737 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.577 - ] - ], - [ - [ - 0.417 - ] - ], - [ - [ - 0.417 - ] - ], - [ - [ - 0.417 - ] - ], - [ - [ - 0.417 - ] - ], - [ - [ - 0.417 - ] - ], - [ - [ - 0.417 - ] - ], - [ - [ - 0.257 - ] - ], - [ - [ - 0.257 - ] - ], - [ - [ - 0.257 - ] - ], - [ - [ - 0.257 - ] - ], - [ - [ - 0.257 - ] - ], - [ - [ - 0.2 - ] - ], - [ - [ - 0.2 - ] - ], - [ - [ - 0.2 - ] - ], - [ - [ - 0.2 - ] - ], - [ - [ - 0.2 - ] - ], - [ - [ - 0.2 - ] - ], - [ - [ - 0.2 - ] - ] - ], - "pv_curtailed_series_kw": [ - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ] - ], - "storage_microgrid_upgrade_cost": 0.0, - "pv_to_load_series_kw": [ - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 2.758 - ] - ], - [ - [ - 39.255 - ] - ], - [ - [ - 59.673 - ] - ], - [ - [ - 73.365 - ] - ], - [ - [ - 80.053 - ] - ], - [ - [ - 79.996 - ] - ], - [ - [ - 60.066 - ] - ], - [ - [ - 40.728 - ] - ], - [ - [ - 41.627 - ] - ], - [ - [ - 5.186 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 3.263 - ] - ], - [ - [ - 39.004 - ] - ], - [ - [ - 58.26 - ] - ], - [ - [ - 50.412 - ] - ], - [ - [ - 49.591 - ] - ], - [ - [ - 61.527 - ] - ], - [ - [ - 72.96 - ] - ], - [ - [ - 60.65 - ] - ], - [ - [ - 41.599 - ] - ], - [ - [ - 10.932 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 5.697 - ] - ], - [ - [ - 30.045 - ] - ], - [ - [ - 29.681 - ] - ], - [ - [ - 56.252 - ] - ], - [ - [ - 56.252 - ] - ], - [ - [ - 73.966 - ] - ], - [ - [ - 73.101 - ] - ], - [ - [ - 60.527 - ] - ], - [ - [ - 41.133 - ] - ], - [ - [ - 11.171 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 8.639 - ] - ], - [ - [ - 40.084 - ] - ], - [ - [ - 61.564 - ] - ], - [ - [ - 76.487 - ] - ], - [ - [ - 84.305 - ] - ], - [ - [ - 84.578 - ] - ], - [ - [ - 78.174 - ] - ], - [ - [ - 65.253 - ] - ], - [ - [ - 44.658 - ] - ], - [ - [ - 12.953 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ] - ], - "storage_discharge_series_kw": [ - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 31.8763058956 - ] - ], - [ - [ - 26.477048520759453 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 31.8763058956 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 31.8763058956 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.8641905819693108 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 31.8763058956 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 31.8763058956 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 31.8763058956 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 11.426396256453451 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ], - [ - [ - 0.0 - ] - ] - ], - "microgrid_upgrade_capital_cost": 0.0 - }, - "ElectricStorage": { - "size_kw": 31.88, - "size_kwh": 210.17, - "initial_capital_cost": 124638.15, - "dc_couple_inverter_size_kw": 82.18, - "soc_series_fraction": [ - 0.5, - 0.5, - 0.5, - 0.5, - 0.5, - 0.5, - 0.5, - 0.51, - 0.654, - 0.798, - 0.941, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.354, - 0.497, - 0.641, - 0.785, - 0.929, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.28, - 0.424, - 0.567, - 0.711, - 0.855, - 0.999, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.236, - 0.38, - 0.523, - 0.667, - 0.811, - 0.955, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.356, - 0.5, - 0.643, - 0.787, - 0.931, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.377, - 0.521, - 0.664, - 0.808, - 0.952, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.235, - 0.379, - 0.523, - 0.666, - 0.81, - 0.954, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.282, - 0.425, - 0.569, - 0.713, - 0.857, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.214, - 0.358, - 0.502, - 0.645, - 0.789, - 0.933, - 1.0, - 1.0, - 0.851, - 0.691, - 0.531, - 0.371, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.211, - 0.213, - 0.222, - 0.281, - 0.425, - 0.569, - 0.712, - 0.856, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.232, - 0.376, - 0.519, - 0.663, - 0.807, - 0.951, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.377, - 0.521, - 0.665, - 0.808, - 0.952, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.236, - 0.38, - 0.524, - 0.668, - 0.811, - 0.955, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.216, - 0.359, - 0.503, - 0.647, - 0.791, - 0.912, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.232, - 0.373, - 0.517, - 0.661, - 0.804, - 0.948, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.376, - 0.52, - 0.664, - 0.807, - 0.951, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.226, - 0.332, - 0.448, - 0.591, - 0.735, - 0.879, - 1.0, - 1.0, - 0.922, - 0.762, - 0.602, - 0.442, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.31, - 0.324, - 0.388, - 0.497, - 0.594, - 0.738, - 0.882, - 1.0, - 0.88, - 0.72, - 0.56, - 0.4, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.24, - 0.274, - 0.418, - 0.562, - 0.706, - 0.849, - 0.954, - 0.972, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.272, - 0.416, - 0.559, - 0.703, - 0.847, - 0.991, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.24, - 0.384, - 0.528, - 0.671, - 0.815, - 0.959, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.238, - 0.382, - 0.525, - 0.669, - 0.813, - 0.957, - 1.0, - 1.0, - 1.0, - 0.969, - 0.809, - 0.649, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.489, - 0.495, - 0.55, - 0.611, - 0.703, - 0.795, - 0.892, - 0.973, - 1.0, - 1.0, - 1.0, - 0.869, - 0.709, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.549, - 0.567, - 0.62, - 0.653, - 0.711, - 0.712, - 0.856, - 1.0, - 0.934, - 0.774, - 0.614, - 0.454, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.294, - 0.329, - 0.413, - 0.557, - 0.565, - 0.709, - 0.852, - 0.996, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.244, - 0.388, - 0.532, - 0.676, - 0.819, - 0.963, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.253, - 0.396, - 0.54, - 0.684, - 0.828, - 0.972, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.253, - 0.396, - 0.54, - 0.684, - 0.828, - 0.971, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.216, - 0.36, - 0.503, - 0.647, - 0.791, - 0.935, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.3, - 0.443, - 0.587, - 0.731, - 0.875, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.239, - 0.375, - 0.519, - 0.663, - 0.807, - 0.95, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.256, - 0.399, - 0.543, - 0.687, - 0.831, - 0.975, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.261, - 0.405, - 0.549, - 0.692, - 0.836, - 0.98, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.258, - 0.402, - 0.546, - 0.689, - 0.833, - 0.977, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.213, - 0.289, - 0.418, - 0.561, - 0.705, - 0.849, - 0.993, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.259, - 0.403, - 0.547, - 0.691, - 0.834, - 0.978, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.34, - 0.484, - 0.628, - 0.771, - 0.915, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.292, - 0.42, - 0.55, - 0.654, - 0.797, - 0.941, - 1.0, - 0.908, - 0.748, - 0.588, - 0.428, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.268, - 0.323, - 0.425, - 0.569, - 0.713, - 0.856, - 0.909, - 0.967, - 1.0, - 0.905, - 0.745, - 0.585, - 0.425, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.265, - 0.272, - 0.334, - 0.362, - 0.425, - 0.569, - 0.712, - 0.856, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.344, - 0.488, - 0.631, - 0.775, - 0.919, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.256, - 0.4, - 0.535, - 0.679, - 0.823, - 0.966, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.264, - 0.408, - 0.552, - 0.66, - 0.804, - 0.948, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.269, - 0.413, - 0.557, - 0.701, - 0.844, - 0.988, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.223, - 0.366, - 0.51, - 0.654, - 0.798, - 0.941, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.271, - 0.415, - 0.559, - 0.703, - 0.847, - 0.99, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.27, - 0.413, - 0.557, - 0.701, - 0.845, - 0.988, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.219, - 0.314, - 0.434, - 0.578, - 0.709, - 0.784, - 0.928, - 1.0, - 1.0, - 0.991, - 0.831, - 0.671, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.511, - 0.52, - 0.527, - 0.536, - 0.569, - 0.712, - 0.856, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.273, - 0.416, - 0.56, - 0.704, - 0.848, - 0.991, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.269, - 0.413, - 0.557, - 0.701, - 0.844, - 0.988, - 1.0, - 1.0, - 0.874, - 0.714, - 0.554, - 0.394, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.303, - 0.35, - 0.395, - 0.425, - 0.569, - 0.712, - 0.856, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.283, - 0.426, - 0.57, - 0.714, - 0.858, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.283, - 0.427, - 0.571, - 0.714, - 0.858, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.279, - 0.422, - 0.566, - 0.71, - 0.854, - 0.998, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.277, - 0.421, - 0.565, - 0.708, - 0.852, - 0.996, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.345, - 0.489, - 0.633, - 0.776, - 0.92, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.287, - 0.431, - 0.575, - 0.719, - 0.863, - 1.0, - 1.0, - 1.0, - 0.925, - 0.765, - 0.605, - 0.445, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.285, - 0.294, - 0.395, - 0.475, - 0.588, - 0.731, - 0.756, - 0.899, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.223, - 0.318, - 0.438, - 0.582, - 0.726, - 0.87, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.236, - 0.333, - 0.477, - 0.621, - 0.764, - 0.908, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.283, - 0.427, - 0.571, - 0.715, - 0.858, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.286, - 0.43, - 0.574, - 0.717, - 0.861, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.24, - 0.334, - 0.457, - 0.601, - 0.745, - 0.888, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.293, - 0.437, - 0.58, - 0.724, - 0.868, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.302, - 0.446, - 0.59, - 0.733, - 0.877, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.271, - 0.415, - 0.559, - 0.703, - 0.846, - 0.99, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.299, - 0.428, - 0.571, - 0.715, - 0.859, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.262, - 0.38, - 0.524, - 0.667, - 0.811, - 0.955, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.303, - 0.447, - 0.591, - 0.735, - 0.878, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.303, - 0.447, - 0.59, - 0.734, - 0.878, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.308, - 0.452, - 0.596, - 0.74, - 0.883, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.213, - 0.309, - 0.453, - 0.597, - 0.74, - 0.884, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.213, - 0.303, - 0.447, - 0.591, - 0.735, - 0.879, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.215, - 0.316, - 0.46, - 0.604, - 0.748, - 0.891, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.216, - 0.319, - 0.463, - 0.607, - 0.751, - 0.894, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.217, - 0.32, - 0.464, - 0.608, - 0.752, - 0.895, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.263, - 0.368, - 0.512, - 0.656, - 0.799, - 0.943, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.217, - 0.313, - 0.457, - 0.601, - 0.745, - 0.888, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.217, - 0.31, - 0.453, - 0.597, - 0.741, - 0.885, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.218, - 0.315, - 0.443, - 0.586, - 0.73, - 0.874, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.218, - 0.311, - 0.434, - 0.578, - 0.722, - 0.866, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.219, - 0.313, - 0.456, - 0.6, - 0.744, - 0.888, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.221, - 0.323, - 0.467, - 0.611, - 0.755, - 0.898, - 0.957, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.221, - 0.324, - 0.467, - 0.611, - 0.755, - 0.899, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.221, - 0.32, - 0.464, - 0.607, - 0.751, - 0.895, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.222, - 0.278, - 0.397, - 0.541, - 0.685, - 0.829, - 0.972, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.225, - 0.338, - 0.482, - 0.626, - 0.769, - 0.913, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.225, - 0.33, - 0.474, - 0.618, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.341, - 0.485, - 0.629, - 0.773, - 0.916, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.339, - 0.482, - 0.626, - 0.77, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.226, - 0.331, - 0.474, - 0.618, - 0.762, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.333, - 0.451, - 0.594, - 0.738, - 0.882, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.341, - 0.485, - 0.629, - 0.772, - 0.916, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.23, - 0.344, - 0.488, - 0.631, - 0.775, - 0.919, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.345, - 0.489, - 0.632, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.223, - 0.331, - 0.475, - 0.619, - 0.762, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.377, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.248, - 0.357, - 0.501, - 0.644, - 0.788, - 0.932, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.232, - 0.345, - 0.489, - 0.633, - 0.777, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.312, - 0.416, - 0.56, - 0.607, - 0.75, - 0.894, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.346, - 0.45, - 0.594, - 0.738, - 0.881, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 0.905, - 0.745, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.585, - 0.695, - 0.839, - 0.89, - 0.896, - 0.916, - 0.926, - 0.963, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.224, - 0.345, - 0.489, - 0.632, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.347, - 0.491, - 0.635, - 0.778, - 0.922, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.377, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.218, - 0.251, - 0.363, - 0.506, - 0.65, - 0.794, - 0.938, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.233, - 0.344, - 0.488, - 0.632, - 0.776, - 0.919, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.229, - 0.339, - 0.483, - 0.627, - 0.771, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.235, - 0.346, - 0.49, - 0.634, - 0.778, - 0.921, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.234, - 0.339, - 0.483, - 0.626, - 0.77, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.235, - 0.345, - 0.489, - 0.632, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.235, - 0.343, - 0.487, - 0.631, - 0.775, - 0.918, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.394, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.236, - 0.272, - 0.385, - 0.529, - 0.673, - 0.816, - 0.96, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.226, - 0.337, - 0.48, - 0.624, - 0.768, - 0.893, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.308, - 0.414, - 0.54, - 0.599, - 0.743, - 0.887, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.238, - 0.351, - 0.495, - 0.639, - 0.782, - 0.926, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.24, - 0.357, - 0.501, - 0.645, - 0.789, - 0.932, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.241, - 0.354, - 0.498, - 0.642, - 0.785, - 0.929, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.242, - 0.354, - 0.497, - 0.641, - 0.785, - 0.929, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.412, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.255, - 0.293, - 0.402, - 0.546, - 0.689, - 0.833, - 0.977, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.24, - 0.355, - 0.499, - 0.642, - 0.786, - 0.93, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.241, - 0.352, - 0.496, - 0.639, - 0.783, - 0.927, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.239, - 0.348, - 0.491, - 0.635, - 0.779, - 0.923, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.241, - 0.346, - 0.49, - 0.633, - 0.777, - 0.921, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.243, - 0.354, - 0.497, - 0.641, - 0.785, - 0.929, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.247, - 0.342, - 0.485, - 0.629, - 0.773, - 0.917, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.412, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.259, - 0.302, - 0.417, - 0.504, - 0.648, - 0.792, - 0.936, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.246, - 0.364, - 0.507, - 0.651, - 0.795, - 0.939, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.245, - 0.353, - 0.497, - 0.64, - 0.784, - 0.928, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.25, - 0.359, - 0.502, - 0.646, - 0.79, - 0.934, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.248, - 0.359, - 0.503, - 0.647, - 0.791, - 0.934, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.246, - 0.36, - 0.504, - 0.647, - 0.791, - 0.935, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.248, - 0.372, - 0.516, - 0.659, - 0.803, - 0.947, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.43, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.277, - 0.319, - 0.436, - 0.58, - 0.724, - 0.868, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.252, - 0.367, - 0.511, - 0.655, - 0.799, - 0.942, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.25, - 0.362, - 0.506, - 0.65, - 0.793, - 0.937, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.249, - 0.361, - 0.505, - 0.648, - 0.792, - 0.936, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.246, - 0.36, - 0.504, - 0.648, - 0.792, - 0.935, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.245, - 0.36, - 0.504, - 0.648, - 0.792, - 0.935, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.245, - 0.355, - 0.499, - 0.643, - 0.787, - 0.931, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.43, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.276, - 0.313, - 0.42, - 0.564, - 0.708, - 0.851, - 0.995, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.243, - 0.352, - 0.496, - 0.64, - 0.784, - 0.927, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.244, - 0.349, - 0.492, - 0.636, - 0.78, - 0.924, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.243, - 0.327, - 0.471, - 0.615, - 0.759, - 0.903, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.247, - 0.36, - 0.504, - 0.648, - 0.791, - 0.935, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.251, - 0.363, - 0.507, - 0.651, - 0.794, - 0.938, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.249, - 0.358, - 0.502, - 0.646, - 0.79, - 0.933, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.448, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.295, - 0.333, - 0.441, - 0.584, - 0.728, - 0.872, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.448, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.288, - 0.296, - 0.334, - 0.439, - 0.583, - 0.726, - 0.87, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.245, - 0.351, - 0.495, - 0.639, - 0.783, - 0.926, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.244, - 0.323, - 0.41, - 0.553, - 0.697, - 0.841, - 0.961, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.245, - 0.347, - 0.49, - 0.634, - 0.778, - 0.922, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.242, - 0.324, - 0.397, - 0.541, - 0.685, - 0.829, - 0.972, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.245, - 0.347, - 0.491, - 0.635, - 0.778, - 0.922, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.449, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.297, - 0.332, - 0.433, - 0.577, - 0.721, - 0.865, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.229, - 0.287, - 0.332, - 0.386, - 0.53, - 0.674, - 0.818, - 0.961, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.245, - 0.352, - 0.496, - 0.64, - 0.783, - 0.927, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.246, - 0.361, - 0.504, - 0.648, - 0.792, - 0.936, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.245, - 0.361, - 0.505, - 0.649, - 0.793, - 0.936, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.243, - 0.353, - 0.497, - 0.64, - 0.784, - 0.928, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.243, - 0.349, - 0.493, - 0.637, - 0.78, - 0.924, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.449, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.289, - 0.296, - 0.33, - 0.433, - 0.577, - 0.721, - 0.864, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.244, - 0.35, - 0.494, - 0.638, - 0.781, - 0.925, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.244, - 0.352, - 0.496, - 0.64, - 0.784, - 0.927, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.243, - 0.349, - 0.493, - 0.637, - 0.78, - 0.924, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.243, - 0.345, - 0.488, - 0.632, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.241, - 0.344, - 0.488, - 0.632, - 0.776, - 0.919, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.243, - 0.347, - 0.491, - 0.634, - 0.778, - 0.922, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.467, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.315, - 0.349, - 0.453, - 0.597, - 0.74, - 0.884, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.246, - 0.346, - 0.49, - 0.634, - 0.778, - 0.921, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.242, - 0.342, - 0.486, - 0.63, - 0.773, - 0.917, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.241, - 0.342, - 0.486, - 0.63, - 0.774, - 0.918, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.239, - 0.339, - 0.482, - 0.626, - 0.77, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.238, - 0.337, - 0.481, - 0.625, - 0.769, - 0.912, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.239, - 0.326, - 0.469, - 0.613, - 0.756, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.467, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.315, - 0.347, - 0.437, - 0.581, - 0.725, - 0.868, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.238, - 0.332, - 0.476, - 0.62, - 0.764, - 0.907, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.238, - 0.333, - 0.477, - 0.621, - 0.765, - 0.908, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.24, - 0.341, - 0.485, - 0.629, - 0.772, - 0.916, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.241, - 0.345, - 0.489, - 0.633, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.237, - 0.336, - 0.48, - 0.624, - 0.768, - 0.912, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.235, - 0.337, - 0.481, - 0.625, - 0.768, - 0.912, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.466, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.311, - 0.341, - 0.444, - 0.587, - 0.731, - 0.875, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.235, - 0.337, - 0.481, - 0.625, - 0.769, - 0.912, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.234, - 0.333, - 0.477, - 0.621, - 0.764, - 0.908, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.467, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.307, - 0.314, - 0.344, - 0.435, - 0.579, - 0.723, - 0.867, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.243, - 0.333, - 0.477, - 0.621, - 0.764, - 0.908, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.236, - 0.331, - 0.475, - 0.619, - 0.762, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.234, - 0.331, - 0.474, - 0.618, - 0.762, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.466, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.312, - 0.341, - 0.436, - 0.58, - 0.724, - 0.868, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.231, - 0.308, - 0.37, - 0.514, - 0.657, - 0.801, - 0.945, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.208, - 0.239, - 0.336, - 0.48, - 0.623, - 0.767, - 0.911, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.234, - 0.332, - 0.476, - 0.62, - 0.764, - 0.907, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.232, - 0.33, - 0.474, - 0.617, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.223, - 0.299, - 0.416, - 0.56, - 0.662, - 0.796, - 0.93, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.228, - 0.318, - 0.462, - 0.606, - 0.75, - 0.893, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.466, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.311, - 0.338, - 0.43, - 0.574, - 0.718, - 0.861, - 1.0, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.231, - 0.328, - 0.472, - 0.616, - 0.759, - 0.903, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.231, - 0.329, - 0.473, - 0.616, - 0.76, - 0.904, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.231, - 0.327, - 0.471, - 0.615, - 0.758, - 0.902, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.23, - 0.328, - 0.472, - 0.615, - 0.759, - 0.903, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.231, - 0.327, - 0.471, - 0.614, - 0.758, - 0.902, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.231, - 0.323, - 0.466, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.992, - 0.832, - 0.672, - 0.599, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.439, - 0.44, - 0.458, - 0.478, - 0.496, - 0.64, - 0.784, - 0.928, - 0.945, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.231, - 0.321, - 0.465, - 0.608, - 0.752, - 0.896, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.229, - 0.322, - 0.466, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.229, - 0.323, - 0.467, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.23, - 0.321, - 0.465, - 0.609, - 0.753, - 0.897, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.23, - 0.323, - 0.467, - 0.611, - 0.755, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.229, - 0.323, - 0.467, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.447, - 0.287, - 0.287, - 0.287, - 0.287, - 0.287, - 0.287, - 0.287, - 0.287, - 0.287, - 0.287, - 0.291, - 0.317, - 0.41, - 0.554, - 0.698, - 0.842, - 0.986, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.23, - 0.322, - 0.466, - 0.609, - 0.753, - 0.897, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.215, - 0.217, - 0.343, - 0.487, - 0.631, - 0.775, - 0.919, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.23, - 0.322, - 0.466, - 0.61, - 0.754, - 0.897, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.229, - 0.324, - 0.467, - 0.611, - 0.755, - 0.899, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.23, - 0.323, - 0.467, - 0.611, - 0.755, - 0.899, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.232, - 0.326, - 0.47, - 0.614, - 0.757, - 0.901, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.43, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.27, - 0.272, - 0.3, - 0.402, - 0.546, - 0.69, - 0.833, - 0.977, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.229, - 0.33, - 0.474, - 0.617, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.229, - 0.331, - 0.475, - 0.619, - 0.762, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.229, - 0.33, - 0.474, - 0.617, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.329, - 0.473, - 0.617, - 0.76, - 0.904, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.202, - 0.229, - 0.329, - 0.473, - 0.617, - 0.76, - 0.904, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.325, - 0.469, - 0.612, - 0.756, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.429, - 0.269, - 0.269, - 0.269, - 0.269, - 0.269, - 0.269, - 0.269, - 0.269, - 0.269, - 0.269, - 0.271, - 0.297, - 0.393, - 0.537, - 0.681, - 0.824, - 0.968, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.227, - 0.322, - 0.466, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.323, - 0.467, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.323, - 0.466, - 0.61, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.322, - 0.466, - 0.61, - 0.753, - 0.897, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.325, - 0.468, - 0.612, - 0.756, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.227, - 0.328, - 0.472, - 0.616, - 0.759, - 0.903, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.412, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.252, - 0.281, - 0.384, - 0.528, - 0.672, - 0.816, - 0.959, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.228, - 0.33, - 0.473, - 0.617, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.228, - 0.329, - 0.472, - 0.616, - 0.76, - 0.904, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.334, - 0.477, - 0.621, - 0.765, - 0.909, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.331, - 0.475, - 0.619, - 0.763, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.323, - 0.467, - 0.611, - 0.754, - 0.898, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.32, - 0.464, - 0.608, - 0.751, - 0.895, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.394, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.234, - 0.261, - 0.357, - 0.501, - 0.645, - 0.788, - 0.932, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.326, - 0.47, - 0.613, - 0.757, - 0.901, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.325, - 0.469, - 0.613, - 0.757, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.309, - 0.453, - 0.596, - 0.74, - 0.884, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.32, - 0.463, - 0.607, - 0.751, - 0.895, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.333, - 0.477, - 0.62, - 0.764, - 0.908, - 1.0, - 1.0, - 1.0, - 0.843, - 0.683, - 0.523, - 0.363, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.203, - 0.233, - 0.338, - 0.481, - 0.625, - 0.769, - 0.913, - 0.972, - 0.978, - 0.983, - 0.823, - 0.663, - 0.503, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.33, - 0.474, - 0.618, - 0.762, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.377, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.246, - 0.348, - 0.492, - 0.636, - 0.78, - 0.924, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.228, - 0.328, - 0.472, - 0.616, - 0.759, - 0.903, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.228, - 0.328, - 0.472, - 0.616, - 0.76, - 0.903, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.33, - 0.474, - 0.618, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.341, - 0.485, - 0.628, - 0.772, - 0.916, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.232, - 0.343, - 0.487, - 0.631, - 0.775, - 0.918, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.339, - 0.483, - 0.626, - 0.77, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.339, - 0.483, - 0.627, - 0.771, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.23, - 0.336, - 0.479, - 0.623, - 0.767, - 0.911, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.332, - 0.476, - 0.62, - 0.764, - 0.907, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.321, - 0.465, - 0.609, - 0.753, - 0.897, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.232, - 0.347, - 0.491, - 0.635, - 0.779, - 0.922, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.356, - 0.5, - 0.643, - 0.787, - 0.931, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.354, - 0.498, - 0.641, - 0.785, - 0.929, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.349, - 0.493, - 0.637, - 0.78, - 0.924, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.339, - 0.483, - 0.626, - 0.77, - 0.914, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.351, - 0.495, - 0.639, - 0.783, - 0.926, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.346, - 0.49, - 0.634, - 0.777, - 0.921, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.228, - 0.33, - 0.473, - 0.617, - 0.761, - 0.905, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.355, - 0.499, - 0.643, - 0.786, - 0.93, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.353, - 0.497, - 0.641, - 0.785, - 0.928, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.352, - 0.496, - 0.639, - 0.783, - 0.927, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.341, - 0.485, - 0.629, - 0.773, - 0.917, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.35, - 0.494, - 0.637, - 0.781, - 0.925, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.224, - 0.325, - 0.468, - 0.612, - 0.756, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.23, - 0.338, - 0.482, - 0.626, - 0.769, - 0.913, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.23, - 0.34, - 0.484, - 0.627, - 0.771, - 0.915, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.341, - 0.485, - 0.628, - 0.772, - 0.916, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.214, - 0.31, - 0.454, - 0.598, - 0.742, - 0.886, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.23, - 0.341, - 0.484, - 0.628, - 0.772, - 0.916, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.228, - 0.34, - 0.484, - 0.628, - 0.772, - 0.915, - 1.0, - 1.0, - 1.0, - 0.857, - 0.697, - 0.537, - 0.377, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.217, - 0.242, - 0.258, - 0.333, - 0.476, - 0.597, - 0.741, - 0.884, - 0.93, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.357, - 0.501, - 0.644, - 0.788, - 0.932, - 0.963, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.233, - 0.355, - 0.499, - 0.643, - 0.787, - 0.93, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.35, - 0.494, - 0.638, - 0.781, - 0.925, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.231, - 0.351, - 0.494, - 0.638, - 0.782, - 0.926, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.345, - 0.489, - 0.632, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.344, - 0.488, - 0.632, - 0.776, - 0.919, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.23, - 0.348, - 0.491, - 0.635, - 0.779, - 0.923, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.347, - 0.49, - 0.634, - 0.778, - 0.922, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.342, - 0.486, - 0.63, - 0.773, - 0.917, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.225, - 0.324, - 0.468, - 0.611, - 0.755, - 0.899, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.226, - 0.337, - 0.481, - 0.625, - 0.769, - 0.912, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.226, - 0.343, - 0.486, - 0.63, - 0.774, - 0.918, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.227, - 0.345, - 0.488, - 0.632, - 0.776, - 0.92, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.224, - 0.34, - 0.483, - 0.627, - 0.771, - 0.915, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.221, - 0.335, - 0.478, - 0.622, - 0.766, - 0.91, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.219, - 0.332, - 0.475, - 0.619, - 0.763, - 0.907, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.218, - 0.332, - 0.476, - 0.619, - 0.763, - 0.907, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.218, - 0.331, - 0.475, - 0.619, - 0.763, - 0.906, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.213, - 0.315, - 0.459, - 0.603, - 0.746, - 0.89, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.313, - 0.457, - 0.6, - 0.744, - 0.888, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.316, - 0.46, - 0.603, - 0.747, - 0.891, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.214, - 0.334, - 0.478, - 0.622, - 0.765, - 0.909, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.213, - 0.332, - 0.476, - 0.62, - 0.764, - 0.907, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.212, - 0.327, - 0.471, - 0.615, - 0.758, - 0.902, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.211, - 0.325, - 0.469, - 0.613, - 0.756, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.21, - 0.322, - 0.466, - 0.61, - 0.754, - 0.897, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.209, - 0.318, - 0.462, - 0.606, - 0.75, - 0.893, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.31, - 0.454, - 0.598, - 0.741, - 0.885, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.206, - 0.325, - 0.469, - 0.612, - 0.756, - 0.9, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.205, - 0.32, - 0.463, - 0.607, - 0.751, - 0.895, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.204, - 0.312, - 0.455, - 0.599, - 0.743, - 0.887, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.308, - 0.452, - 0.596, - 0.74, - 0.884, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.203, - 0.309, - 0.452, - 0.596, - 0.74, - 0.884, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.305, - 0.448, - 0.592, - 0.736, - 0.88, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.201, - 0.302, - 0.446, - 0.59, - 0.734, - 0.877, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.303, - 0.447, - 0.591, - 0.735, - 0.879, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.281, - 0.425, - 0.568, - 0.712, - 0.856, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.282, - 0.381, - 0.524, - 0.668, - 0.812, - 0.956, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.235, - 0.337, - 0.48, - 0.624, - 0.768, - 0.912, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.207, - 0.351, - 0.488, - 0.631, - 0.775, - 0.919, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.289, - 0.433, - 0.577, - 0.721, - 0.864, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.306, - 0.449, - 0.593, - 0.737, - 0.881, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.299, - 0.443, - 0.587, - 0.731, - 0.875, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.235, - 0.347, - 0.491, - 0.635, - 0.778, - 0.904, - 0.994, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.287, - 0.367, - 0.511, - 0.654, - 0.798, - 0.857, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.291, - 0.435, - 0.579, - 0.722, - 0.866, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.288, - 0.431, - 0.575, - 0.719, - 0.863, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.338, - 0.481, - 0.625, - 0.769, - 0.913, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.29, - 0.433, - 0.577, - 0.721, - 0.865, - 1.0, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.373, - 0.516, - 0.66, - 0.804, - 0.948, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.373, - 0.516, - 0.66, - 0.804, - 0.948, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.232, - 0.376, - 0.519, - 0.663, - 0.807, - 0.951, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.223, - 0.318, - 0.462, - 0.605, - 0.749, - 0.893, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.224, - 0.324, - 0.468, - 0.611, - 0.755, - 0.899, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.272, - 0.416, - 0.56, - 0.704, - 0.847, - 0.991, - 1.0, - 1.0, - 1.0, - 1.0, - 1.0, - 0.957, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.797, - 0.802, - 0.853, - 0.93, - 0.934, - 0.954, - 0.962, - 0.972, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.264, - 0.407, - 0.551, - 0.695, - 0.839, - 0.982, - 1.0, - 1.0, - 0.976, - 0.816, - 0.656, - 0.496, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.336, - 0.349, - 0.378, - 0.404, - 0.445, - 0.588, - 0.725, - 0.868, - 1.0, - 0.946, - 0.786, - 0.626, - 0.466, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.306, - 0.367, - 0.369, - 0.513, - 0.637, - 0.781, - 0.925, - 0.999, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.263, - 0.407, - 0.551, - 0.695, - 0.839, - 0.982, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.263, - 0.407, - 0.551, - 0.695, - 0.838, - 0.982, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.26, - 0.403, - 0.547, - 0.691, - 0.835, - 0.978, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.26, - 0.404, - 0.547, - 0.691, - 0.835, - 0.979, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.258, - 0.402, - 0.546, - 0.689, - 0.833, - 0.977, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.255, - 0.398, - 0.542, - 0.686, - 0.83, - 0.973, - 1.0, - 1.0, - 0.922, - 0.762, - 0.602, - 0.442, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.282, - 0.333, - 0.476, - 0.62, - 0.754, - 0.898, - 0.906, - 0.976, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.253, - 0.397, - 0.541, - 0.685, - 0.828, - 0.972, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.253, - 0.397, - 0.541, - 0.685, - 0.828, - 0.972, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.249, - 0.323, - 0.467, - 0.611, - 0.754, - 0.898, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.243, - 0.325, - 0.468, - 0.612, - 0.756, - 0.9, - 0.923, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.247, - 0.391, - 0.535, - 0.679, - 0.822, - 0.966, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.249, - 0.393, - 0.536, - 0.68, - 0.824, - 0.968, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.234, - 0.257, - 0.401, - 0.544, - 0.688, - 0.832, - 0.976, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.245, - 0.389, - 0.532, - 0.676, - 0.82, - 0.964, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.243, - 0.386, - 0.53, - 0.674, - 0.818, - 0.961, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.214, - 0.284, - 0.393, - 0.537, - 0.681, - 0.825, - 0.968, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.238, - 0.382, - 0.525, - 0.669, - 0.813, - 0.957, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.239, - 0.382, - 0.526, - 0.67, - 0.814, - 0.957, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.237, - 0.381, - 0.525, - 0.669, - 0.812, - 0.956, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.241, - 0.385, - 0.529, - 0.672, - 0.816, - 0.96, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.24, - 0.384, - 0.528, - 0.671, - 0.815, - 0.959, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.237, - 0.38, - 0.524, - 0.668, - 0.812, - 0.955, - 1.0, - 1.0, - 0.924, - 0.764, - 0.604, - 0.444, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.284, - 0.29, - 0.329, - 0.383, - 0.497, - 0.641, - 0.785, - 0.926, - 1.0, - 1.0, - 0.987, - 0.827, - 0.667, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.507, - 0.509, - 0.604, - 0.748, - 0.863, - 0.912, - 0.957, - 0.97, - 1.0, - 1.0, - 1.0, - 1.0, - 0.851, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.691, - 0.696, - 0.698, - 0.752, - 0.776, - 0.814, - 0.828, - 0.861, - 1.0, - 1.0, - 1.0, - 1.0, - 0.863, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.703, - 0.732, - 0.744, - 0.821, - 0.836, - 0.883, - 0.931, - 0.972, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2, - 0.229, - 0.369, - 0.513, - 0.657, - 0.8, - 0.944, - 1.0, - 1.0, - 0.84, - 0.68, - 0.52, - 0.36, - 0.2, - 0.2, - 0.2, - 0.2, - 0.2 - ], - "storage_to_load_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 29.636, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.58, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 23.941, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.126, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 26.115, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 13.14, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.269, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.993, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.803, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 25.119, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.04, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 28.45, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.869, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 28.45, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 25.024, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 21.597, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 21.541, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 18.015, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 17.961, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 14.385, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 14.378, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 14.195, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 14.144, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 10.564, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 10.598, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 10.802, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 10.601, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 10.812, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 10.749, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.63, - 31.876, - 31.876, - 14.412, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 14.465, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 17.987, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 18.086, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 21.597, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 25.024, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.203, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 28.45, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 28.45, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 28.476, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.532, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.77, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 10.661, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.585, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.081, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.56, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 29.663, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 27.283, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0 - ] - }, - "status": "optimal", - "solver_seconds": 4.146, - "ElectricUtility": { - "lifecycle_emissions_tonnes_CO2_bau": 10653.83, - "annual_emissions_tonnes_CO2_bau": 495.07, - "lifecycle_emissions_tonnes_PM25": 0.54, - "annual_energy_supplied_kwh_bau": 1.0054267e6, - "lifecycle_emissions_tonnes_PM25_bau": 0.6, - "lifecycle_emissions_tonnes_SO2": 0.63, - "annual_emissions_tonnes_SO2_bau": 0.03, - "electric_to_load_series_kw": [ - 31.876, - 31.876, - 31.876, - 32.165, - 32.388, - 32.759, - 32.725, - 12.575, - 73.11, - 63.72, - 111.297, - 90.255, - 113.198, - 116.304, - 122.103, - 98.833, - 115.351, - 101.185, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.869, - 79.217, - 142.417, - 199.573, - 194.506, - 192.324, - 192.813, - 180.031, - 170.021, - 146.76, - 167.355, - 184.831, - 136.613, - 136.616, - 150.852, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.547, - 79.191, - 137.719, - 199.706, - 193.94, - 191.367, - 191.818, - 194.907, - 169.273, - 145.937, - 163.221, - 184.831, - 136.641, - 136.845, - 151.093, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.658, - 81.787, - 142.648, - 199.388, - 194.189, - 192.063, - 192.573, - 173.826, - 169.627, - 178.181, - 195.171, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.407, - 77.017, - 112.15, - 169.597, - 164.427, - 162.144, - 162.643, - 171.571, - 180.023, - 147.39, - 166.027, - 185.484, - 137.388, - 137.517, - 151.75, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 32.132, - 32.88, - 32.841, - 33.064, - 71.197, - 62.768, - 108.679, - 152.989, - 205.92, - 206.866, - 201.716, - 180.428, - 170.533, - 146.785, - 163.131, - 184.831, - 118.899, - 83.472, - 115.368, - 80.213, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 32.031, - 32.061, - 32.114, - 14.615, - 73.449, - 64.789, - 112.81, - 110.403, - 146.014, - 127.473, - 122.371, - 98.772, - 114.821, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.587, - 81.715, - 143.041, - 199.466, - 193.879, - 191.253, - 191.631, - 173.07, - 168.583, - 145.504, - 162.299, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.617, - 78.905, - 137.236, - 200.016, - 194.96, - 192.632, - 193.009, - 195.752, - 169.559, - 145.968, - 162.067, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.299, - 79.241, - 142.978, - 200.593, - 200.37, - 203.665, - 199.795, - 192.035, - 178.183, - 156.707, - 166.795, - 184.881, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.17, - 78.132, - 131.441, - 201.548, - 197.855, - 194.809, - 202.002, - 204.154, - 202.425, - 148.339, - 162.106, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.145, - 80.844, - 143.659, - 201.041, - 195.666, - 193.139, - 193.428, - 175.484, - 169.984, - 146.183, - 161.623, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.872, - 63.241, - 108.101, - 153.007, - 196.36, - 194.744, - 197.657, - 182.89, - 179.961, - 152.374, - 161.746, - 186.084, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.849, - 71.84, - 63.377, - 111.493, - 118.587, - 159.772, - 140.014, - 129.983, - 105.75, - 111.359, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 12.811, - 74.153, - 65.414, - 121.732, - 117.58, - 159.149, - 136.545, - 137.751, - 114.836, - 115.228, - 101.185, - 65.78, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 72.055, - 81.543, - 144.186, - 201.719, - 196.16, - 193.388, - 193.44, - 175.715, - 169.551, - 145.97, - 157.662, - 184.831, - 136.613, - 136.613, - 150.785, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 72.113, - 82.001, - 145.256, - 203.221, - 198.08, - 194.936, - 202.225, - 176.299, - 170.686, - 146.793, - 158.234, - 185.772, - 137.705, - 137.733, - 151.814, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.148, - 33.158, - 33.216, - 72.404, - 81.07, - 140.715, - 207.003, - 203.144, - 200.842, - 201.761, - 205.999, - 180.379, - 173.387, - 163.409, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.35, - 80.521, - 131.453, - 201.99, - 206.137, - 205.01, - 194.142, - 196.574, - 207.31, - 160.034, - 163.418, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.942, - 32.204, - 32.265, - 32.304, - 70.631, - 63.94, - 109.033, - 152.814, - 195.753, - 192.941, - 205.652, - 197.767, - 198.544, - 163.914, - 163.745, - 184.831, - 118.899, - 83.472, - 115.348, - 79.969, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 32.186, - 32.412, - 32.572, - 32.831, - 13.001, - 65.917, - 71.332, - 118.973, - 117.874, - 152.522, - 159.243, - 134.393, - 100.995, - 108.417, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.244, - 33.107, - 71.731, - 82.197, - 143.499, - 201.284, - 196.18, - 193.306, - 193.219, - 173.104, - 169.212, - 145.126, - 156.622, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.252, - 33.274, - 71.623, - 81.829, - 144.287, - 201.757, - 206.599, - 201.207, - 204.881, - 184.362, - 176.465, - 183.93, - 188.069, - 184.845, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.536, - 78.214, - 135.358, - 201.612, - 206.589, - 209.321, - 209.491, - 217.231, - 219.764, - 212.548, - 204.153, - 190.298, - 138.73, - 138.619, - 152.783, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.007, - 77.277, - 131.757, - 200.925, - 200.959, - 217.074, - 224.38, - 229.497, - 239.5, - 203.918, - 189.423, - 203.469, - 148.371, - 139.821, - 152.829, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.525, - 80.529, - 138.115, - 208.109, - 204.64, - 225.008, - 238.408, - 252.749, - 240.697, - 177.861, - 174.342, - 192.748, - 148.007, - 141.976, - 153.127, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 65.393, - 63.785, - 106.741, - 150.148, - 192.182, - 200.395, - 218.99, - 198.779, - 190.828, - 159.146, - 160.663, - 183.492, - 119.125, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 16.512, - 70.807, - 61.807, - 109.45, - 109.62, - 146.079, - 123.02, - 122.197, - 97.656, - 107.988, - 97.759, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.545, - 82.9, - 141.933, - 199.542, - 194.564, - 192.323, - 192.612, - 177.323, - 172.438, - 152.694, - 161.135, - 181.404, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.015, - 79.559, - 143.537, - 200.486, - 201.175, - 199.115, - 199.639, - 185.384, - 174.898, - 149.449, - 159.727, - 181.404, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.134, - 78.18, - 131.509, - 204.58, - 208.545, - 190.75, - 190.734, - 193.23, - 194.613, - 143.179, - 156.392, - 181.404, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.59, - 81.668, - 143.785, - 201.939, - 196.594, - 193.935, - 193.466, - 174.679, - 168.321, - 144.214, - 155.73, - 181.404, - 136.613, - 136.613, - 150.829, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.73, - 83.473, - 142.281, - 199.182, - 199.39, - 198.037, - 199.967, - 167.803, - 167.479, - 143.258, - 154.173, - 181.404, - 136.728, - 136.928, - 151.24, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 32.006, - 67.647, - 66.854, - 106.542, - 150.935, - 194.003, - 191.456, - 191.639, - 166.93, - 167.523, - 143.269, - 154.053, - 177.978, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.949, - 28.668, - 17.268, - 72.36, - 63.234, - 110.933, - 108.373, - 143.88, - 119.843, - 119.794, - 95.485, - 106.159, - 94.333, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.128, - 79.148, - 137.677, - 208.065, - 202.15, - 199.941, - 202.38, - 206.663, - 177.19, - 152.004, - 160.427, - 177.978, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.707, - 83.867, - 143.486, - 201.235, - 195.809, - 192.9, - 192.57, - 173.117, - 173.253, - 147.552, - 157.748, - 177.978, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.924, - 81.022, - 140.83, - 207.953, - 203.635, - 198.278, - 204.604, - 193.065, - 179.162, - 149.024, - 158.463, - 177.978, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.02, - 80.433, - 136.75, - 208.248, - 208.07, - 205.533, - 204.4, - 202.938, - 194.541, - 165.313, - 160.607, - 177.978, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.812, - 83.695, - 140.261, - 208.363, - 207.295, - 201.679, - 200.738, - 202.193, - 202.698, - 178.008, - 167.91, - 179.554, - 136.756, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 62.819, - 60.345, - 100.517, - 150.398, - 210.112, - 223.964, - 225.248, - 222.774, - 226.555, - 166.706, - 178.196, - 186.818, - 121.135, - 84.248, - 115.542, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.318, - 72.191, - 63.394, - 111.251, - 109.054, - 145.63, - 136.431, - 125.924, - 103.285, - 112.355, - 96.512, - 65.808, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.44, - 82.589, - 143.568, - 215.129, - 216.302, - 224.958, - 235.161, - 220.822, - 212.766, - 182.892, - 193.23, - 193.031, - 140.132, - 138.965, - 152.421, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.389, - 83.404, - 142.226, - 200.13, - 219.369, - 222.596, - 219.988, - 198.007, - 191.31, - 171.36, - 174.016, - 183.779, - 139.715, - 138.601, - 151.9, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.537, - 84.014, - 141.445, - 198.788, - 192.986, - 190.433, - 190.947, - 164.59, - 167.217, - 143.149, - 154.033, - 175.238, - 136.758, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.558, - 79.576, - 141.312, - 199.15, - 194.112, - 191.488, - 191.517, - 175.347, - 167.439, - 143.144, - 153.467, - 174.552, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.161, - 84.814, - 142.401, - 199.797, - 194.44, - 191.764, - 191.724, - 164.511, - 167.344, - 143.128, - 153.965, - 174.942, - 137.07, - 137.197, - 151.421, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 64.059, - 67.638, - 107.353, - 151.345, - 194.134, - 191.471, - 191.577, - 164.847, - 167.509, - 146.966, - 162.039, - 174.552, - 118.899, - 83.472, - 115.357, - 80.121, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 13.017, - 69.009, - 70.418, - 123.792, - 124.469, - 154.56, - 158.648, - 142.833, - 132.155, - 138.999, - 90.906, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.318, - 61.442, - 60.707, - 113.702, - 115.913, - 153.428, - 157.776, - 150.857, - 94.622, - 105.175, - 90.675, - 66.024, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.194, - 33.723, - 33.906, - 62.098, - 85.642, - 142.245, - 199.723, - 194.618, - 191.826, - 191.625, - 163.899, - 166.68, - 142.561, - 152.924, - 174.156, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.407, - 33.466, - 61.664, - 84.726, - 142.532, - 200.81, - 195.826, - 192.635, - 192.036, - 164.748, - 166.765, - 149.093, - 152.776, - 174.065, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.069, - 84.497, - 134.684, - 200.033, - 198.779, - 205.54, - 200.684, - 203.101, - 208.902, - 149.586, - 157.399, - 174.466, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.098, - 85.701, - 139.652, - 196.666, - 190.965, - 189.978, - 189.667, - 158.558, - 163.57, - 139.951, - 151.427, - 174.203, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 59.852, - 68.005, - 104.478, - 149.53, - 192.6, - 190.655, - 190.897, - 162.373, - 166.882, - 141.827, - 152.07, - 170.76, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 18.821, - 70.342, - 61.666, - 109.077, - 106.606, - 142.051, - 121.645, - 143.016, - 114.54, - 113.557, - 86.847, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.03, - 85.129, - 141.079, - 199.015, - 193.495, - 190.546, - 190.36, - 161.792, - 165.842, - 141.57, - 152.328, - 170.254, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.179, - 33.342, - 58.029, - 78.084, - 139.91, - 197.066, - 199.042, - 198.36, - 189.984, - 176.456, - 164.161, - 162.307, - 161.897, - 171.023, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.252, - 58.042, - 86.492, - 139.375, - 196.53, - 190.99, - 189.93, - 188.555, - 158.531, - 163.797, - 156.84, - 163.963, - 170.484, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 58.026, - 78.828, - 139.598, - 203.315, - 206.246, - 205.712, - 198.234, - 206.408, - 205.234, - 160.443, - 158.744, - 171.125, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.95, - 79.644, - 139.084, - 207.026, - 208.018, - 202.205, - 206.403, - 204.876, - 182.155, - 154.911, - 160.267, - 171.125, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 56.059, - 63.113, - 103.629, - 159.725, - 199.442, - 199.248, - 203.684, - 202.304, - 194.976, - 166.296, - 169.581, - 173.922, - 119.409, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.315, - 18.957, - 70.104, - 71.097, - 118.13, - 124.879, - 171.335, - 146.489, - 148.945, - 114.798, - 116.278, - 86.899, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.699, - 85.318, - 141.092, - 199.933, - 194.938, - 204.539, - 190.965, - 162.386, - 172.464, - 142.756, - 158.563, - 170.137, - 136.903, - 137.073, - 151.312, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 57.85, - 81.882, - 139.641, - 207.389, - 194.632, - 192.19, - 199.486, - 186.849, - 167.059, - 142.827, - 152.838, - 169.952, - 136.613, - 136.637, - 150.902, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 54.407, - 85.989, - 140.099, - 197.735, - 199.192, - 197.623, - 198.415, - 169.386, - 170.831, - 146.615, - 152.019, - 170.781, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 54.393, - 86.265, - 138.709, - 196.626, - 191.562, - 190.025, - 185.472, - 160.591, - 165.665, - 141.403, - 154.486, - 166.664, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.559, - 83.687, - 139.841, - 198.135, - 193.276, - 191.406, - 192.443, - 165.939, - 167.925, - 147.64, - 155.089, - 166.32, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 53.211, - 68.304, - 106.872, - 150.064, - 193.189, - 190.775, - 190.411, - 161.543, - 166.711, - 142.293, - 152.462, - 166.162, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 15.483, - 65.045, - 70.101, - 113.317, - 115.009, - 151.327, - 148.621, - 132.389, - 125.401, - 101.669, - 71.86, - 47.494, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.58, - 81.952, - 139.147, - 204.994, - 197.179, - 191.951, - 190.001, - 185.178, - 160.882, - 166.113, - 141.824, - 152.202, - 117.772, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.114, - 82.359, - 139.256, - 205.441, - 197.67, - 192.625, - 190.141, - 185.279, - 160.858, - 166.086, - 141.7, - 152.005, - 117.662, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.056, - 82.479, - 139.428, - 205.145, - 198.016, - 193.609, - 191.415, - 185.527, - 161.904, - 166.616, - 142.033, - 152.139, - 117.651, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.766, - 79.685, - 139.83, - 204.831, - 197.222, - 192.036, - 189.993, - 184.006, - 160.963, - 166.366, - 142.055, - 152.2, - 117.663, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.75, - 79.565, - 139.187, - 206.014, - 199.425, - 194.827, - 193.099, - 187.485, - 162.463, - 166.954, - 142.084, - 151.992, - 117.568, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.962, - 61.823, - 104.466, - 155.962, - 196.592, - 191.402, - 189.826, - 182.111, - 159.927, - 165.075, - 143.475, - 155.216, - 100.228, - 83.472, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 12.806, - 69.486, - 66.959, - 112.26, - 107.316, - 141.585, - 133.251, - 112.36, - 117.406, - 93.09, - 67.842, - 46.538, - -0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.432, - 79.719, - 140.167, - 203.672, - 196.209, - 191.29, - 189.849, - 181.298, - 161.131, - 166.474, - 141.92, - 151.81, - 117.42, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.716, - 79.048, - 136.039, - 205.675, - 200.138, - 197.071, - 198.588, - 198.891, - 181.127, - 175.798, - 142.414, - 152.211, - 114.054, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.388, - 79.734, - 139.762, - 205.814, - 198.774, - 194.368, - 192.018, - 184.62, - 161.901, - 166.916, - 142.946, - 153.159, - 114.658, - 137.367, - 119.8, - 60.908, - 33.107, - 33.107, - 33.107, - 33.232, - 33.608, - 33.8, - 34.179, - 34.375, - 69.002, - 80.844, - 139.985, - 206.509, - 199.301, - 195.593, - 193.626, - 186.612, - 162.646, - 167.041, - 142.459, - 152.406, - 114.065, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.216, - 80.007, - 139.618, - 207.755, - 206.098, - 195.779, - 197.955, - 194.798, - 169.912, - 171.861, - 143.287, - 155.927, - 114.534, - 136.613, - 118.932, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.844, - 62.159, - 103.927, - 159.127, - 202.639, - 193.872, - 191.939, - 190.269, - 163.411, - 176.159, - 145.834, - 155.519, - 96.415, - 83.472, - 83.472, - 79.955, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 12.926, - 68.974, - 69.424, - 115.453, - 109.9, - 142.789, - 135.859, - 118.088, - 119.174, - 94.58, - 68.963, - 43.193, - -0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.626, - 79.675, - 139.645, - 204.195, - 196.921, - 195.81, - 196.863, - 209.073, - 192.447, - 182.425, - 158.123, - 162.537, - 115.232, - 136.756, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.543, - 79.673, - 139.869, - 204.323, - 197.082, - 192.73, - 190.737, - 181.019, - 161.229, - 166.283, - 142.087, - 159.084, - 113.905, - 136.613, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.544, - 79.724, - 139.3, - 205.505, - 198.871, - 196.76, - 211.124, - 205.408, - 184.418, - 185.902, - 152.136, - 156.196, - 115.107, - 136.708, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.492, - 79.629, - 135.293, - 206.876, - 199.229, - 200.576, - 207.46, - 218.155, - 191.679, - 185.608, - 161.532, - 169.55, - 118.686, - 138.139, - 119.739, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.478, - 79.52, - 140.276, - 202.702, - 195.911, - 202.661, - 217.39, - 212.731, - 194.066, - 192.507, - 161.755, - 166.798, - 118.606, - 137.719, - 119.263, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 62.392, - 61.747, - 104.162, - 155.978, - 208.606, - 219.644, - 223.298, - 211.503, - 195.125, - 204.356, - 177.091, - 189.149, - 104.369, - 84.168, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 13.558, - 70.094, - 65.624, - 111.259, - 106.26, - 141.16, - 127.962, - 110.967, - 116.606, - 92.595, - 67.853, - 42.857, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.441, - 80.345, - 140.716, - 203.316, - 196.175, - 191.763, - 189.995, - 178.025, - 167.727, - 166.623, - 142.099, - 152.022, - 113.762, - 133.186, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.438, - 80.256, - 139.934, - 209.017, - 204.546, - 195.833, - 193.401, - 181.929, - 163.038, - 167.486, - 142.85, - 152.471, - 113.776, - 133.186, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.356, - 80.258, - 139.978, - 206.585, - 202.657, - 193.167, - 190.678, - 184.933, - 161.262, - 166.329, - 141.85, - 152.037, - 113.661, - 133.186, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.303, - 80.336, - 140.588, - 202.871, - 195.358, - 190.866, - 189.516, - 176.306, - 159.697, - 165.198, - 150.543, - 151.969, - 113.565, - 133.186, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.61, - 80.287, - 140.487, - 202.712, - 195.357, - 190.344, - 189.486, - 175.721, - 160.265, - 165.654, - 141.601, - 151.961, - 113.545, - 133.186, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 59.181, - 62.485, - 104.999, - 154.831, - 196.096, - 191.975, - 190.388, - 177.087, - 162.149, - 167.106, - 142.476, - 152.382, - 96.11, - 80.117, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 13.217, - 68.973, - 67.732, - 116.473, - 124.241, - 165.654, - 153.403, - 134.964, - 140.619, - 114.904, - 77.741, - 44.233, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.012, - 79.864, - 139.787, - 204.38, - 198.507, - 198.206, - 195.778, - 178.931, - 166.388, - 171.458, - 147.171, - 157.988, - 115.63, - 133.857, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.309, - 80.082, - 140.272, - 203.418, - 196.676, - 193.278, - 195.433, - 178.982, - 164.244, - 169.612, - 145.102, - 154.991, - 115.66, - 134.064, - 119.02, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.172, - 77.482, - 140.107, - 205.355, - 196.139, - 200.18, - 208.838, - 191.823, - 204.388, - 200.752, - 197.424, - 219.175, - 163.69, - 166.142, - 140.056, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.633, - 79.753, - 140.054, - 208.541, - 215.06, - 221.229, - 226.44, - 232.559, - 200.963, - 216.499, - 223.518, - 218.556, - 147.958, - 142.989, - 120.344, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.969, - 77.289, - 139.792, - 203.736, - 214.852, - 225.934, - 239.273, - 239.346, - 236.38, - 230.577, - 180.844, - 182.034, - 128.56, - 135.401, - 119.698, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 55.532, - 61.778, - 105.315, - 153.734, - 194.858, - 190.85, - 190.158, - 176.168, - 161.325, - 166.795, - 142.39, - 152.613, - 96.536, - 80.097, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.204, - 13.986, - 69.53, - 66.996, - 114.048, - 110.735, - 144.937, - 130.134, - 115.057, - 119.599, - 94.643, - 68.887, - 42.764, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.799, - 79.986, - 139.892, - 204.188, - 197.991, - 195.996, - 201.213, - 186.256, - 175.075, - 180.997, - 156.131, - 165.604, - 122.376, - 131.255, - 119.688, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.784, - 79.932, - 139.861, - 204.656, - 198.929, - 195.528, - 193.815, - 179.468, - 163.449, - 168.072, - 143.163, - 152.621, - 113.79, - 129.76, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.989, - 79.821, - 139.879, - 204.414, - 203.34, - 199.863, - 192.528, - 180.108, - 163.538, - 168.319, - 143.39, - 155.092, - 113.776, - 129.762, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.986, - 80.059, - 139.926, - 204.126, - 198.214, - 194.917, - 195.262, - 183.791, - 169.386, - 173.753, - 148.071, - 156.798, - 115.132, - 130.484, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.729, - 80.014, - 139.364, - 205.198, - 198.93, - 194.396, - 193.134, - 181.558, - 165.703, - 170.643, - 144.684, - 153.273, - 113.875, - 129.76, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 55.868, - 62.458, - 104.586, - 156.658, - 199.1, - 195.644, - 194.418, - 180.768, - 165.302, - 169.587, - 144.186, - 153.082, - 96.093, - 76.619, - 83.516, - 80.169, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.864, - 13.859, - 69.907, - 69.172, - 115.883, - 111.785, - 145.086, - 131.479, - 115.787, - 120.366, - 95.581, - 69.238, - 42.852, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 55.009, - 81.346, - 140.882, - 204.904, - 198.72, - 194.547, - 192.536, - 169.499, - 162.597, - 167.603, - 142.802, - 152.329, - 113.689, - 130.117, - 119.363, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 55.09, - 80.493, - 140.613, - 205.498, - 197.947, - 199.157, - 207.233, - 199.895, - 174.976, - 188.762, - 157.538, - 160.023, - 114.947, - 129.76, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.96, - 80.094, - 137.518, - 205.462, - 207.34, - 201.252, - 206.758, - 200.522, - 197.1, - 182.263, - 148.898, - 155.618, - 113.709, - 129.76, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.751, - 80.278, - 140.245, - 203.854, - 197.272, - 193.023, - 191.031, - 175.898, - 179.69, - 175.215, - 155.702, - 159.389, - 115.22, - 129.76, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.856, - 80.401, - 140.434, - 203.31, - 197.08, - 193.015, - 191.472, - 175.594, - 163.53, - 168.609, - 143.525, - 152.933, - 113.506, - 129.76, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 52.452, - 62.688, - 104.693, - 155.684, - 197.485, - 193.234, - 192.093, - 177.32, - 164.786, - 169.784, - 144.316, - 153.072, - 96.185, - 77.034, - 83.895, - 80.478, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 15.041, - 14.191, - 70.113, - 68.069, - 114.798, - 111.058, - 145.598, - 130.718, - 117.375, - 121.774, - 96.259, - 69.73, - 42.615, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.933, - 80.691, - 140.184, - 205.773, - 199.664, - 195.519, - 193.462, - 166.849, - 164.057, - 169.003, - 144.166, - 152.727, - 113.63, - 126.46, - 119.102, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.859, - 80.545, - 140.288, - 203.92, - 197.945, - 194.248, - 193.274, - 181.18, - 171.766, - 180.581, - 156.831, - 165.455, - 119.338, - 126.725, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.43, - 80.222, - 139.762, - 204.587, - 198.94, - 195.408, - 194.428, - 179.977, - 167.493, - 174.309, - 148.681, - 157.496, - 114.095, - 126.368, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.231, - 80.052, - 139.465, - 205.044, - 199.395, - 195.718, - 194.623, - 180.7, - 166.45, - 170.625, - 145.093, - 153.687, - 113.542, - 126.334, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.174, - 80.108, - 139.266, - 206.27, - 200.883, - 196.724, - 194.822, - 180.611, - 165.404, - 169.818, - 144.582, - 153.432, - 113.482, - 126.32, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 49.059, - 62.533, - 104.304, - 157.421, - 202.397, - 197.736, - 197.776, - 176.869, - 163.726, - 173.818, - 145.996, - 154.176, - 95.679, - 73.152, - 83.472, - 79.942, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.828, - 14.432, - 67.981, - 69.91, - 114.714, - 110.897, - 144.231, - 154.085, - 133.074, - 119.562, - 94.744, - 71.788, - 42.051, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 51.024, - 81.064, - 140.325, - 203.79, - 197.144, - 192.963, - 191.018, - 178.034, - 180.536, - 192.787, - 146.333, - 155.371, - 113.393, - 126.238, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.653, - 80.373, - 140.222, - 203.316, - 206.391, - 193.374, - 192.01, - 174.578, - 173.513, - 173.962, - 144.157, - 153.194, - 113.279, - 126.239, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.589, - 80.39, - 139.372, - 205.469, - 199.612, - 195.636, - 193.633, - 178.05, - 165.207, - 172.27, - 147.133, - 155.93, - 115.413, - 126.262, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.711, - 80.698, - 139.524, - 204.935, - 198.715, - 194.414, - 196.486, - 185.659, - 175.217, - 180.338, - 155.65, - 164.414, - 119.425, - 127.055, - 118.915, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.437, - 80.36, - 139.594, - 204.685, - 198.543, - 196.158, - 204.598, - 192.402, - 180.647, - 187.154, - 161.916, - 170.396, - 127.431, - 129.288, - 119.511, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.923, - 62.504, - 104.339, - 155.859, - 198.094, - 193.588, - 191.79, - 186.656, - 184.889, - 191.661, - 166.652, - 175.513, - 110.137, - 71.839, - 83.708, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.767, - 14.209, - 69.855, - 65.449, - 112.585, - 108.993, - 142.903, - 123.61, - 114.935, - 119.915, - 94.958, - 68.985, - 42.361, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.363, - 80.365, - 140.115, - 203.419, - 197.461, - 193.55, - 189.293, - 161.978, - 168.745, - 174.046, - 149.402, - 158.95, - 120.057, - 123.476, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.415, - 80.493, - 139.922, - 203.55, - 197.2, - 193.088, - 191.325, - 177.243, - 191.582, - 178.715, - 146.668, - 154.476, - 113.362, - 122.704, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.255, - 80.174, - 139.64, - 204.264, - 198.193, - 194.337, - 192.481, - 175.117, - 165.466, - 171.207, - 150.016, - 155.639, - 113.328, - 122.632, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.288, - 80.24, - 139.59, - 203.94, - 197.518, - 193.221, - 191.306, - 174.003, - 162.74, - 169.166, - 144.91, - 154.377, - 113.19, - 122.715, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.278, - 80.092, - 139.822, - 203.982, - 198.446, - 195.334, - 194.16, - 177.274, - 165.146, - 169.611, - 144.131, - 152.958, - 113.41, - 122.72, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 49.348, - 62.56, - 104.639, - 155.742, - 198.35, - 194.739, - 193.488, - 176.864, - 165.442, - 170.314, - 144.548, - 153.005, - 95.642, - 69.573, - 83.479, - 80.138, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.78, - 13.901, - 69.383, - 68.267, - 115.448, - 112.199, - 146.669, - 131.37, - 118.916, - 122.583, - 96.372, - 69.57, - 42.443, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.912, - 80.26, - 139.341, - 205.82, - 200.009, - 196.032, - 194.143, - 163.531, - 164.884, - 169.478, - 144.168, - 153.049, - 113.391, - 122.713, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.653, - 80.068, - 139.414, - 205.466, - 200.176, - 196.866, - 198.413, - 188.595, - 177.99, - 182.531, - 156.618, - 164.853, - 123.951, - 124.891, - 118.935, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.211, - 79.788, - 138.94, - 205.928, - 200.365, - 197.843, - 204.251, - 193.547, - 179.114, - 183.696, - 158.127, - 166.622, - 124.968, - 124.367, - 119.055, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.118, - 79.768, - 137.309, - 204.707, - 198.656, - 201.737, - 192.986, - 183.312, - 164.261, - 171.751, - 149.601, - 158.47, - 116.349, - 122.789, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.322, - 79.961, - 139.58, - 203.993, - 197.938, - 193.933, - 192.182, - 175.151, - 163.282, - 168.097, - 143.083, - 152.378, - 113.203, - 122.612, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 49.532, - 62.704, - 104.339, - 155.889, - 197.918, - 193.765, - 192.137, - 174.432, - 163.461, - 168.307, - 143.223, - 152.483, - 95.258, - 65.974, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.995, - 14.112, - 68.847, - 68.453, - 116.015, - 112.147, - 146.603, - 147.391, - 132.791, - 129.13, - 103.384, - 70.46, - 42.362, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.865, - 13.863, - 68.25, - 68.763, - 134.079, - 133.501, - 160.11, - 133.953, - 138.376, - 142.885, - 116.793, - 86.615, - 52.031, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.943, - 79.691, - 138.902, - 206.594, - 214.011, - 233.279, - 246.221, - 226.312, - 235.82, - 226.946, - 193.864, - 197.596, - 148.207, - 146.5, - 136.855, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.048, - 79.852, - 139.527, - 234.721, - 237.914, - 240.165, - 241.173, - 227.811, - 214.496, - 217.816, - 190.416, - 194.412, - 146.86, - 144.548, - 134.945, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.046, - 79.863, - 136.882, - 203.603, - 206.73, - 212.75, - 224.566, - 233.302, - 227.478, - 206.097, - 183.587, - 178.765, - 133.027, - 128.376, - 119.986, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.192, - 79.65, - 138.618, - 205.663, - 200.386, - 196.942, - 194.783, - 183.33, - 174.075, - 173.593, - 146.161, - 154.859, - 112.804, - 118.936, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 49.488, - 62.36, - 101.727, - 154.316, - 206.431, - 202.711, - 199.214, - 199.858, - 176.131, - 183.241, - 153.109, - 156.773, - 95.586, - 65.807, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.949, - 13.886, - 67.999, - 69.541, - 117.017, - 113.687, - 148.377, - 135.011, - 120.187, - 123.828, - 97.472, - 70.082, - 42.147, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.288, - 79.675, - 138.624, - 206.4, - 200.878, - 197.075, - 193.372, - 163.489, - 165.705, - 170.067, - 144.507, - 152.896, - 112.948, - 118.945, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.326, - 79.136, - 135.258, - 199.982, - 200.874, - 201.996, - 205.638, - 194.871, - 196.853, - 183.494, - 143.922, - 152.611, - 112.392, - 118.855, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.634, - 79.885, - 139.063, - 204.904, - 198.845, - 194.818, - 192.912, - 177.532, - 164.058, - 169.458, - 144.25, - 153.208, - 112.872, - 118.84, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.251, - 79.706, - 139.585, - 203.484, - 197.023, - 192.886, - 191.915, - 178.754, - 170.435, - 176.786, - 151.724, - 160.665, - 121.077, - 119.959, - 118.941, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.263, - 79.744, - 139.843, - 203.027, - 196.722, - 192.766, - 191.543, - 176.08, - 163.075, - 167.903, - 142.786, - 151.939, - 112.805, - 118.935, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.938, - 61.846, - 103.725, - 156.296, - 198.997, - 195.634, - 194.307, - 179.215, - 167.602, - 173.296, - 147.296, - 155.258, - 95.196, - 65.711, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.84, - 13.514, - 68.295, - 68.553, - 116.098, - 112.799, - 147.064, - 132.69, - 118.038, - 121.966, - 96.054, - 68.895, - 41.945, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.14, - 79.415, - 138.626, - 205.851, - 199.966, - 195.927, - 192.188, - 162.304, - 165.978, - 171.837, - 146.334, - 154.909, - 113.041, - 118.88, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.066, - 79.486, - 138.864, - 204.55, - 199.475, - 195.56, - 192.621, - 177.707, - 165.177, - 172.983, - 148.435, - 157.135, - 114.948, - 118.863, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.121, - 79.417, - 139.0, - 204.803, - 198.856, - 194.877, - 193.185, - 180.782, - 168.704, - 175.519, - 152.34, - 160.62, - 117.979, - 116.038, - 118.976, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.115, - 79.397, - 138.851, - 205.376, - 200.148, - 197.152, - 196.421, - 181.966, - 166.703, - 170.253, - 144.291, - 152.511, - 112.63, - 115.335, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.138, - 79.313, - 138.557, - 206.355, - 200.658, - 196.772, - 195.62, - 185.143, - 172.289, - 179.143, - 154.111, - 162.104, - 121.636, - 120.778, - 119.158, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.675, - 61.431, - 103.177, - 157.3, - 199.623, - 201.626, - 208.486, - 202.6, - 188.742, - 193.049, - 167.485, - 175.005, - 109.974, - 65.336, - 83.755, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.934, - 13.506, - 67.814, - 68.848, - 116.419, - 113.103, - 149.164, - 138.678, - 126.752, - 133.81, - 107.635, - 70.633, - 41.791, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.112, - 79.278, - 138.646, - 205.672, - 200.313, - 197.315, - 191.871, - 168.656, - 170.531, - 174.259, - 148.16, - 156.117, - 113.089, - 115.69, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.386, - 79.562, - 138.445, - 206.404, - 201.684, - 201.722, - 200.956, - 194.154, - 182.333, - 186.89, - 160.471, - 167.993, - 126.801, - 120.846, - 119.487, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.153, - 79.352, - 138.357, - 206.325, - 200.95, - 197.94, - 202.669, - 194.543, - 179.788, - 183.754, - 157.383, - 165.047, - 124.48, - 119.141, - 119.204, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.143, - 79.202, - 138.469, - 206.001, - 200.325, - 199.888, - 206.917, - 194.415, - 181.245, - 187.299, - 161.115, - 168.47, - 125.509, - 117.997, - 119.307, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.79, - 78.979, - 138.342, - 206.337, - 200.822, - 200.832, - 208.263, - 203.546, - 190.745, - 196.86, - 169.897, - 177.08, - 132.845, - 125.779, - 120.09, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.535, - 61.245, - 102.846, - 158.326, - 202.02, - 222.053, - 227.753, - 212.96, - 196.895, - 202.875, - 178.905, - 185.48, - 113.568, - 65.796, - 83.894, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.899, - 13.41, - 66.526, - 71.734, - 117.545, - 113.863, - 147.88, - 138.815, - 125.138, - 130.0, - 104.74, - 74.441, - 41.973, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.986, - 79.375, - 137.627, - 208.125, - 202.502, - 196.972, - 200.621, - 179.464, - 186.72, - 193.564, - 167.247, - 174.02, - 126.717, - 118.37, - 119.452, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.988, - 78.995, - 137.908, - 207.799, - 202.402, - 199.069, - 207.592, - 202.963, - 184.596, - 197.244, - 171.517, - 169.23, - 124.58, - 116.507, - 119.131, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.984, - 79.067, - 137.926, - 207.092, - 201.634, - 199.077, - 203.058, - 198.322, - 183.562, - 187.65, - 161.311, - 168.314, - 123.854, - 117.164, - 119.38, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.15, - 79.123, - 138.431, - 216.937, - 226.794, - 232.102, - 236.797, - 230.45, - 215.991, - 218.52, - 189.259, - 193.56, - 146.037, - 141.028, - 136.733, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.887, - 79.066, - 138.69, - 217.113, - 221.114, - 224.24, - 228.198, - 220.012, - 211.172, - 219.199, - 191.405, - 194.121, - 147.283, - 138.804, - 133.793, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.612, - 61.136, - 102.877, - 169.286, - 227.972, - 236.201, - 240.38, - 232.646, - 216.566, - 221.963, - 195.607, - 198.442, - 126.06, - 79.979, - 88.43, - 80.07, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.683, - 12.913, - 67.616, - 68.742, - 116.355, - 113.141, - 146.796, - 134.481, - 117.079, - 121.073, - 95.231, - 68.11, - 41.617, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.832, - 78.732, - 138.504, - 205.287, - 199.502, - 195.804, - 189.79, - 163.996, - 168.674, - 178.006, - 154.706, - 162.865, - 123.314, - 125.728, - 122.487, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.752, - 78.756, - 138.469, - 205.712, - 207.167, - 216.706, - 218.989, - 211.258, - 197.428, - 204.897, - 178.451, - 184.712, - 139.507, - 133.332, - 128.314, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.671, - 12.984, - 67.339, - 70.059, - 118.625, - 115.121, - 154.416, - 137.132, - 119.674, - 123.436, - 97.24, - 68.961, - 41.447, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.817, - 79.025, - 137.66, - 207.859, - 202.497, - 198.86, - 197.232, - 173.69, - 181.94, - 185.128, - 158.933, - 166.309, - 125.181, - 123.893, - 119.984, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.006, - 79.571, - 137.568, - 208.049, - 202.597, - 198.839, - 196.864, - 190.435, - 175.618, - 178.584, - 152.956, - 160.535, - 119.723, - 122.319, - 120.326, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.565, - 61.239, - 102.485, - 158.598, - 201.013, - 196.99, - 202.154, - 209.438, - 202.7, - 208.681, - 181.841, - 188.323, - 117.59, - 72.324, - 84.516, - 79.977, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.724, - 12.95, - 67.232, - 69.388, - 116.553, - 112.557, - 149.102, - 142.402, - 133.945, - 148.62, - 124.41, - 94.956, - 57.105, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.762, - 78.867, - 140.278, - 238.614, - 238.321, - 239.753, - 241.31, - 217.503, - 223.739, - 230.101, - 200.754, - 202.733, - 152.425, - 144.239, - 139.334, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.825, - 79.113, - 141.614, - 231.098, - 248.274, - 258.061, - 264.032, - 265.364, - 249.679, - 252.911, - 218.025, - 218.223, - 166.673, - 156.412, - 147.931, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.887, - 79.19, - 142.177, - 241.739, - 247.033, - 251.429, - 251.717, - 241.461, - 224.517, - 228.39, - 198.372, - 200.446, - 153.109, - 145.995, - 139.407, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.665, - 78.753, - 138.231, - 221.089, - 236.553, - 246.502, - 250.499, - 243.218, - 226.828, - 228.319, - 197.257, - 198.509, - 150.693, - 142.499, - 135.963, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.636, - 78.603, - 138.166, - 206.5, - 206.302, - 217.022, - 225.978, - 218.629, - 201.494, - 206.318, - 179.339, - 185.396, - 139.993, - 133.666, - 125.623, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.179, - 61.214, - 101.129, - 158.054, - 208.868, - 217.304, - 233.738, - 240.785, - 224.963, - 206.557, - 179.708, - 185.917, - 118.983, - 75.727, - 86.049, - 79.99, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.511, - 13.457, - 66.717, - 71.047, - 118.606, - 114.657, - 153.35, - 158.825, - 142.75, - 149.655, - 124.139, - 88.128, - 49.43, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.678, - 78.674, - 137.763, - 207.175, - 201.369, - 204.191, - 212.093, - 189.854, - 196.669, - 204.466, - 176.982, - 183.102, - 138.797, - 133.602, - 128.087, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.62, - 78.662, - 138.095, - 206.364, - 208.344, - 216.797, - 220.702, - 215.267, - 199.658, - 206.96, - 182.147, - 189.305, - 142.946, - 137.171, - 133.9, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.605, - 78.651, - 138.179, - 206.111, - 200.151, - 196.162, - 199.797, - 196.742, - 179.095, - 184.516, - 160.254, - 168.389, - 128.935, - 133.008, - 124.555, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.589, - 78.624, - 138.103, - 206.347, - 200.385, - 200.259, - 208.108, - 208.747, - 197.44, - 205.072, - 179.3, - 186.383, - 144.026, - 143.124, - 135.553, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.596, - 78.57, - 138.179, - 209.152, - 229.421, - 243.458, - 247.834, - 241.744, - 224.105, - 230.265, - 199.884, - 202.092, - 152.484, - 146.968, - 138.813, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 48.381, - 60.989, - 102.619, - 158.349, - 211.169, - 228.367, - 236.575, - 228.705, - 207.71, - 215.132, - 189.876, - 193.587, - 122.58, - 83.204, - 90.342, - 80.188, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.699, - 12.989, - 66.886, - 70.778, - 118.668, - 119.808, - 167.607, - 163.746, - 143.54, - 148.917, - 154.289, - 92.515, - 54.302, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.275, - 77.109, - 131.763, - 199.77, - 216.082, - 239.466, - 248.762, - 254.803, - 257.595, - 266.687, - 216.756, - 213.048, - 151.267, - 147.99, - 139.737, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.626, - 78.81, - 137.637, - 227.522, - 243.015, - 250.803, - 252.765, - 246.215, - 227.368, - 237.724, - 203.647, - 200.439, - 148.943, - 146.928, - 139.616, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.578, - 78.611, - 137.901, - 207.003, - 206.316, - 216.71, - 223.259, - 221.828, - 206.251, - 211.983, - 186.512, - 194.534, - 150.093, - 147.058, - 140.283, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.577, - 78.653, - 137.932, - 208.781, - 220.066, - 236.112, - 239.864, - 235.473, - 217.116, - 220.141, - 193.958, - 198.509, - 149.87, - 147.418, - 139.262, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.596, - 78.723, - 137.806, - 207.377, - 205.561, - 220.285, - 229.32, - 224.952, - 205.701, - 210.382, - 183.899, - 189.975, - 142.653, - 140.509, - 134.887, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 48.369, - 61.079, - 102.488, - 158.956, - 204.887, - 208.162, - 210.483, - 205.592, - 188.732, - 195.724, - 171.653, - 179.847, - 117.664, - 83.407, - 98.237, - 85.304, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.606, - 13.004, - 67.097, - 73.298, - 145.583, - 153.646, - 190.686, - 182.22, - 162.865, - 167.434, - 142.431, - 106.69, - 67.087, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.562, - 78.797, - 137.967, - 207.613, - 218.595, - 233.488, - 241.534, - 218.978, - 219.811, - 226.252, - 197.339, - 199.373, - 149.433, - 146.595, - 138.965, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.543, - 78.83, - 137.879, - 209.359, - 213.333, - 224.954, - 234.689, - 233.851, - 218.433, - 225.471, - 197.974, - 200.889, - 150.927, - 146.455, - 138.066, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.275, - 78.363, - 130.431, - 229.866, - 237.789, - 247.5, - 248.397, - 248.702, - 235.917, - 222.333, - 193.82, - 195.101, - 144.926, - 143.174, - 134.862, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.525, - 78.932, - 137.921, - 217.722, - 235.347, - 241.389, - 242.459, - 237.513, - 215.93, - 217.149, - 188.704, - 193.623, - 146.699, - 143.848, - 135.285, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.916, - 78.766, - 138.146, - 211.243, - 219.364, - 225.563, - 230.442, - 226.337, - 209.574, - 215.471, - 186.081, - 186.273, - 135.992, - 136.135, - 121.79, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 51.676, - 61.253, - 102.619, - 158.977, - 210.644, - 219.826, - 226.539, - 222.379, - 210.376, - 207.823, - 182.219, - 188.061, - 116.695, - 78.093, - 84.432, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.942, - 13.532, - 67.254, - 70.246, - 117.253, - 113.037, - 146.257, - 136.228, - 116.574, - 120.768, - 95.283, - 68.148, - 41.748, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.152, - 79.06, - 138.742, - 205.203, - 198.806, - 194.35, - 193.566, - 174.659, - 174.124, - 179.317, - 154.219, - 162.604, - 122.582, - 124.3, - 119.111, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.851, - 78.855, - 138.69, - 222.566, - 233.726, - 241.86, - 248.734, - 248.772, - 234.087, - 233.245, - 202.688, - 206.901, - 159.41, - 160.14, - 149.168, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.85, - 78.895, - 151.336, - 253.606, - 267.596, - 273.482, - 276.25, - 271.545, - 251.762, - 256.694, - 227.991, - 231.695, - 171.938, - 161.559, - 146.698, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.835, - 78.886, - 157.015, - 257.174, - 257.552, - 261.579, - 268.672, - 262.776, - 242.334, - 244.174, - 213.325, - 212.284, - 157.718, - 152.744, - 138.043, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.819, - 78.891, - 138.713, - 205.909, - 204.194, - 211.879, - 215.797, - 209.648, - 193.615, - 200.547, - 173.793, - 180.368, - 133.627, - 133.691, - 121.645, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 51.607, - 61.226, - 103.266, - 161.908, - 230.806, - 242.903, - 249.138, - 240.051, - 222.426, - 229.099, - 204.316, - 205.707, - 130.624, - 92.472, - 98.754, - 83.16, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.865, - 13.158, - 68.938, - 87.581, - 152.405, - 153.914, - 193.114, - 189.358, - 171.556, - 176.924, - 152.275, - 111.383, - 69.649, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.82, - 78.915, - 143.225, - 241.418, - 249.782, - 255.052, - 259.586, - 240.522, - 236.541, - 240.486, - 214.446, - 215.245, - 161.406, - 160.624, - 145.016, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.806, - 78.921, - 140.731, - 240.452, - 248.758, - 262.627, - 263.015, - 258.244, - 245.293, - 247.899, - 208.273, - 204.302, - 147.81, - 148.46, - 133.575, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.78, - 79.083, - 139.754, - 237.787, - 244.41, - 249.757, - 258.094, - 255.111, - 233.316, - 238.18, - 212.647, - 215.248, - 163.218, - 164.774, - 148.614, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.769, - 79.111, - 142.026, - 238.767, - 252.228, - 262.429, - 266.928, - 260.502, - 239.351, - 243.003, - 216.032, - 218.071, - 168.231, - 170.658, - 153.458, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.207, - 79.095, - 141.433, - 239.087, - 248.661, - 256.523, - 260.127, - 254.265, - 234.786, - 242.113, - 209.618, - 212.005, - 160.866, - 160.837, - 144.721, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 54.976, - 61.323, - 103.086, - 158.372, - 201.197, - 204.881, - 211.595, - 207.456, - 189.806, - 196.757, - 171.706, - 178.205, - 110.471, - 76.206, - 84.144, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.266, - 13.351, - 68.024, - 69.043, - 118.868, - 111.769, - 151.916, - 150.669, - 138.797, - 145.006, - 119.106, - 82.217, - 43.681, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.194, - 79.136, - 139.11, - 205.56, - 199.598, - 198.707, - 214.272, - 203.024, - 197.937, - 201.779, - 175.603, - 180.045, - 129.372, - 132.337, - 120.159, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.177, - 79.123, - 138.907, - 205.984, - 202.313, - 206.463, - 210.325, - 208.117, - 199.56, - 211.449, - 183.939, - 187.914, - 138.267, - 142.127, - 126.299, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.162, - 79.105, - 138.898, - 205.957, - 201.564, - 209.2, - 217.789, - 215.713, - 203.732, - 214.944, - 187.553, - 191.676, - 143.845, - 152.252, - 133.207, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.165, - 79.239, - 139.217, - 206.788, - 214.54, - 223.809, - 233.479, - 230.529, - 212.178, - 215.602, - 188.473, - 193.777, - 145.48, - 152.649, - 136.406, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.149, - 79.232, - 139.099, - 226.585, - 234.81, - 244.927, - 250.889, - 245.503, - 231.205, - 232.525, - 197.816, - 197.804, - 149.597, - 156.683, - 139.302, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 54.901, - 61.465, - 103.083, - 167.586, - 234.797, - 247.508, - 250.342, - 243.748, - 227.668, - 230.673, - 204.15, - 202.623, - 127.649, - 95.958, - 96.519, - 82.915, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.171, - 13.48, - 67.466, - 72.132, - 132.098, - 136.124, - 180.481, - 176.643, - 154.456, - 173.234, - 143.527, - 96.14, - 58.93, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 79.187, - 138.598, - 230.655, - 241.452, - 248.041, - 252.987, - 242.284, - 227.984, - 230.491, - 200.063, - 201.837, - 151.872, - 156.445, - 137.537, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 79.176, - 138.827, - 210.161, - 220.003, - 229.158, - 233.838, - 228.795, - 210.072, - 214.055, - 186.526, - 192.83, - 146.562, - 152.601, - 133.617, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 79.207, - 138.781, - 207.451, - 207.138, - 216.13, - 220.897, - 215.776, - 201.79, - 218.518, - 192.905, - 192.579, - 144.229, - 149.515, - 132.021, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 78.115, - 138.667, - 207.372, - 211.189, - 227.202, - 238.847, - 238.702, - 232.31, - 243.967, - 192.292, - 204.225, - 151.397, - 158.875, - 137.379, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 79.262, - 138.347, - 215.876, - 226.355, - 233.293, - 237.873, - 234.53, - 214.288, - 220.627, - 192.358, - 194.617, - 146.197, - 150.945, - 124.138, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 58.323, - 61.695, - 103.886, - 158.072, - 200.328, - 205.54, - 219.099, - 218.029, - 210.834, - 218.512, - 192.454, - 195.599, - 119.132, - 88.357, - 85.857, - 80.535, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 13.682, - 68.573, - 69.631, - 117.656, - 114.862, - 167.629, - 186.001, - 183.709, - 183.36, - 130.777, - 96.203, - 57.131, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 13.638, - 68.319, - 69.582, - 116.77, - 112.846, - 151.247, - 146.857, - 150.278, - 152.381, - 127.418, - 84.775, - 44.917, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.445, - 139.263, - 206.508, - 200.607, - 198.244, - 204.767, - 204.279, - 196.289, - 200.258, - 173.984, - 181.512, - 136.127, - 145.875, - 121.871, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.412, - 139.046, - 206.722, - 205.011, - 217.968, - 224.183, - 223.195, - 210.09, - 216.714, - 201.868, - 195.889, - 147.084, - 156.27, - 135.95, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.44, - 139.052, - 210.775, - 220.978, - 237.197, - 244.697, - 238.219, - 224.979, - 228.216, - 199.005, - 202.685, - 154.488, - 165.394, - 145.753, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.494, - 140.327, - 234.309, - 245.566, - 250.815, - 253.251, - 248.384, - 233.333, - 237.836, - 207.74, - 211.512, - 163.437, - 175.051, - 150.307, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 58.323, - 61.952, - 104.61, - 179.821, - 247.117, - 255.108, - 258.731, - 249.522, - 233.622, - 235.349, - 206.027, - 210.651, - 137.595, - 113.066, - 108.47, - 98.048, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 13.991, - 69.534, - 77.831, - 146.914, - 158.835, - 202.235, - 191.974, - 179.263, - 181.707, - 149.736, - 112.02, - 69.201, - -0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.707, - 139.875, - 216.466, - 237.133, - 249.159, - 249.574, - 237.595, - 221.657, - 226.889, - 199.988, - 202.716, - 150.192, - 163.522, - 141.445, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.675, - 139.929, - 205.869, - 211.898, - 224.402, - 235.603, - 230.945, - 215.775, - 220.173, - 193.796, - 199.135, - 149.849, - 162.978, - 138.69, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.613, - 139.702, - 206.185, - 211.599, - 220.975, - 226.356, - 223.568, - 212.592, - 218.887, - 190.213, - 194.204, - 145.768, - 158.26, - 134.039, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.549, - 139.504, - 206.136, - 200.282, - 214.419, - 235.026, - 229.479, - 211.263, - 215.361, - 187.576, - 190.898, - 139.227, - 153.023, - 131.687, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 79.394, - 138.671, - 207.183, - 205.163, - 209.582, - 209.771, - 201.835, - 185.957, - 196.957, - 173.466, - 181.07, - 141.731, - 153.612, - 131.483, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 61.75, - 62.17, - 105.129, - 155.118, - 196.465, - 196.531, - 198.493, - 187.503, - 175.656, - 182.804, - 159.406, - 169.305, - 114.494, - 89.67, - 84.588, - 80.045, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 14.321, - 70.305, - 65.816, - 112.175, - 114.944, - 165.185, - 159.116, - 150.595, - 155.494, - 129.917, - 92.033, - 55.133, - -0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 80.07, - 141.008, - 203.029, - 197.231, - 199.005, - 201.112, - 188.125, - 176.768, - 182.691, - 158.129, - 167.576, - 131.017, - 144.534, - 120.286, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 80.007, - 140.682, - 204.222, - 198.242, - 194.575, - 195.372, - 191.608, - 182.293, - 187.715, - 162.847, - 171.645, - 134.28, - 148.157, - 122.122, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 79.807, - 139.984, - 204.874, - 198.181, - 193.737, - 191.875, - 179.591, - 163.503, - 169.9, - 149.859, - 162.129, - 125.576, - 137.943, - 119.302, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.026, - 80.054, - 140.908, - 203.56, - 197.387, - 195.435, - 201.987, - 195.306, - 185.522, - 190.546, - 165.516, - 174.543, - 134.79, - 144.893, - 120.76, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.025, - 80.004, - 140.526, - 204.643, - 198.296, - 201.603, - 213.623, - 205.022, - 192.613, - 199.167, - 174.87, - 183.208, - 144.704, - 152.293, - 128.941, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 61.75, - 61.874, - 103.982, - 160.383, - 217.732, - 225.11, - 234.961, - 233.351, - 218.871, - 225.043, - 201.018, - 208.006, - 139.449, - 106.267, - 102.088, - 88.935, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 14.4, - 70.391, - 73.241, - 142.955, - 157.402, - 201.785, - 189.456, - 185.402, - 191.292, - 162.389, - 133.631, - 89.055, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 80.158, - 154.76, - 248.774, - 266.667, - 289.255, - 290.857, - 271.766, - 256.872, - 259.47, - 226.448, - 223.566, - 173.423, - 176.192, - 153.765, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 80.101, - 150.726, - 244.137, - 250.616, - 258.427, - 271.616, - 264.699, - 248.893, - 255.419, - 226.42, - 223.72, - 173.823, - 177.306, - 154.167, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 79.896, - 140.342, - 205.159, - 201.107, - 213.238, - 217.717, - 211.006, - 198.677, - 203.626, - 179.096, - 185.887, - 143.692, - 149.574, - 123.57, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 80.151, - 140.904, - 204.382, - 201.132, - 214.21, - 218.965, - 207.181, - 194.447, - 199.161, - 173.048, - 180.474, - 141.182, - 146.217, - 122.127, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 79.305, - 139.408, - 209.227, - 198.309, - 205.814, - 222.451, - 217.356, - 203.821, - 213.452, - 170.614, - 178.518, - 142.323, - 147.502, - 122.418, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 61.75, - 62.09, - 104.765, - 157.41, - 199.773, - 198.532, - 198.076, - 196.009, - 187.607, - 195.671, - 170.101, - 177.856, - 118.673, - 84.221, - 83.482, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 14.092, - 69.493, - 68.313, - 118.745, - 114.442, - 151.814, - 150.445, - 127.271, - 136.234, - 103.915, - 78.689, - 55.479, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.636, - 80.101, - 140.376, - 205.801, - 200.054, - 210.797, - 224.557, - 222.945, - 210.393, - 212.571, - 182.275, - 184.458, - 143.439, - 144.675, - 122.357, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 78.308, - 139.125, - 205.464, - 199.492, - 195.504, - 194.834, - 191.248, - 168.838, - 174.251, - 149.935, - 159.913, - 127.933, - 137.727, - 119.589, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.577, - 79.93, - 140.477, - 204.836, - 199.314, - 201.894, - 207.048, - 197.139, - 181.702, - 186.999, - 162.665, - 172.143, - 139.325, - 141.493, - 121.746, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.452, - 79.682, - 140.629, - 204.165, - 201.188, - 204.326, - 212.086, - 209.155, - 195.947, - 209.844, - 187.878, - 194.264, - 148.244, - 153.416, - 130.731, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 79.371, - 131.623, - 202.884, - 209.923, - 247.487, - 243.759, - 251.063, - 261.155, - 263.644, - 199.341, - 208.734, - 160.485, - 160.972, - 134.902, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 65.176, - 62.457, - 106.358, - 154.212, - 195.94, - 201.631, - 213.403, - 226.515, - 223.513, - 225.284, - 192.161, - 186.607, - 125.489, - 87.081, - 85.837, - 80.604, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 14.459, - 70.759, - 65.9, - 112.861, - 111.946, - 154.165, - 148.202, - 140.046, - 145.459, - 120.204, - 78.96, - 60.714, - -0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 14.312, - 70.448, - 66.633, - 114.245, - 125.546, - 170.383, - 153.42, - 139.425, - 141.912, - 112.883, - 75.525, - 58.982, - -0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 80.076, - 141.368, - 203.752, - 201.653, - 209.487, - 209.139, - 195.584, - 182.758, - 188.057, - 163.099, - 172.383, - 140.318, - 140.454, - 122.122, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 79.918, - 141.018, - 204.403, - 198.222, - 209.09, - 223.53, - 204.769, - 190.142, - 195.079, - 170.534, - 177.588, - 141.368, - 139.78, - 120.764, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 79.877, - 141.028, - 203.997, - 198.081, - 199.053, - 205.75, - 197.366, - 184.497, - 190.137, - 165.349, - 174.501, - 143.524, - 141.464, - 122.239, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 79.974, - 141.277, - 203.946, - 197.695, - 194.636, - 194.66, - 182.249, - 169.867, - 176.154, - 152.102, - 162.518, - 132.998, - 139.244, - 120.5, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 68.602, - 62.227, - 105.812, - 155.972, - 198.292, - 195.021, - 194.296, - 183.974, - 178.451, - 184.268, - 159.332, - 168.859, - 116.821, - 83.62, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.126, - 70.026, - 68.354, - 120.295, - 115.916, - 146.863, - 138.126, - 124.733, - 123.752, - 102.008, - 75.047, - 62.332, - -0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.951, - 79.531, - 139.518, - 206.283, - 199.849, - 196.201, - 196.007, - 189.333, - 172.5, - 179.462, - 155.602, - 165.986, - 136.209, - 138.209, - 120.021, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.124, - 79.688, - 140.712, - 204.979, - 199.074, - 198.785, - 203.541, - 196.578, - 183.532, - 190.461, - 166.4, - 175.83, - 143.787, - 140.688, - 122.133, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.833, - 79.687, - 141.195, - 204.12, - 199.814, - 199.065, - 198.02, - 195.022, - 190.509, - 196.013, - 169.332, - 174.765, - 139.056, - 140.07, - 121.452, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.833, - 79.727, - 141.369, - 208.156, - 217.453, - 213.3, - 212.684, - 200.174, - 186.516, - 192.185, - 167.38, - 177.777, - 146.901, - 141.433, - 122.799, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.833, - 79.436, - 141.465, - 220.219, - 232.231, - 250.939, - 249.538, - 234.447, - 218.605, - 225.134, - 191.059, - 186.424, - 148.165, - 142.027, - 123.488, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 68.602, - 61.446, - 105.523, - 156.201, - 198.174, - 194.664, - 193.545, - 183.09, - 178.751, - 192.072, - 167.237, - 176.02, - 117.605, - 83.505, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 13.225, - 70.036, - 67.757, - 114.801, - 111.622, - 146.177, - 136.368, - 118.884, - 124.341, - 100.502, - 76.025, - 65.758, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.963, - 79.034, - 141.07, - 204.21, - 197.978, - 194.138, - 192.826, - 183.8, - 181.063, - 192.312, - 167.952, - 175.613, - 141.015, - 136.712, - 118.899, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.01, - 78.904, - 141.058, - 204.163, - 198.153, - 194.532, - 194.39, - 187.664, - 176.63, - 185.295, - 161.162, - 171.359, - 140.344, - 138.398, - 120.131, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.007, - 78.424, - 139.926, - 205.839, - 199.446, - 196.732, - 201.262, - 199.912, - 181.765, - 195.014, - 166.586, - 172.424, - 139.641, - 137.962, - 119.977, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.971, - 81.715, - 139.796, - 205.854, - 199.044, - 195.105, - 193.713, - 188.963, - 168.445, - 175.131, - 152.139, - 162.399, - 138.038, - 137.93, - 119.74, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.385, - 81.962, - 140.139, - 204.634, - 197.512, - 195.548, - 198.14, - 191.93, - 171.254, - 177.314, - 154.597, - 165.822, - 139.621, - 138.654, - 120.006, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.127, - 64.592, - 106.301, - 154.501, - 196.182, - 192.344, - 192.447, - 184.054, - 168.156, - 174.116, - 150.872, - 162.504, - 120.83, - 83.828, - 83.472, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 16.039, - 70.862, - 66.196, - 112.804, - 109.785, - 151.311, - 147.161, - 131.119, - 133.046, - 106.244, - 78.316, - 65.762, - 0.0, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.311, - 81.938, - 141.306, - 203.689, - 198.73, - 209.273, - 225.233, - 225.447, - 213.382, - 223.357, - 192.734, - 192.474, - 155.978, - 150.008, - 126.637, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.889, - 81.564, - 141.225, - 203.998, - 204.322, - 219.64, - 232.037, - 233.484, - 222.991, - 212.891, - 180.233, - 180.197, - 149.61, - 142.027, - 121.148, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.899, - 81.507, - 141.034, - 204.606, - 219.479, - 220.648, - 218.81, - 210.233, - 190.781, - 196.214, - 172.806, - 186.315, - 144.828, - 139.501, - 121.005, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.929, - 81.382, - 140.813, - 204.364, - 197.234, - 197.992, - 209.445, - 208.796, - 169.066, - 182.18, - 153.661, - 167.955, - 138.606, - 137.513, - 119.0, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.588, - 81.454, - 140.386, - 204.778, - 197.985, - 194.193, - 194.644, - 191.114, - 169.332, - 175.248, - 152.056, - 167.337, - 139.346, - 138.046, - 119.481, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.102, - 63.787, - 106.29, - 154.789, - 196.082, - 191.988, - 190.692, - 182.504, - 164.244, - 170.838, - 148.201, - 164.163, - 118.899, - 83.472, - 83.472, - 79.944, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 15.239, - 70.959, - 67.129, - 113.427, - 109.491, - 143.671, - 136.551, - 117.041, - 123.287, - 100.797, - 80.99, - 65.758, - -0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 57.45, - 87.648, - 138.737, - 198.088, - 194.131, - 192.833, - 188.973, - 168.952, - 175.387, - 152.28, - 167.611, - 187.346, - 137.981, - 137.303, - 150.796, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 57.145, - 87.549, - 139.064, - 198.659, - 195.022, - 199.954, - 205.113, - 183.602, - 189.092, - 164.193, - 170.751, - 187.637, - 137.954, - 137.484, - 151.025, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.782, - 87.432, - 139.352, - 199.271, - 196.624, - 202.728, - 203.799, - 181.55, - 186.992, - 163.013, - 176.297, - 189.029, - 138.787, - 137.89, - 151.694, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.759, - 87.175, - 139.498, - 205.484, - 217.674, - 226.152, - 229.868, - 205.307, - 205.373, - 175.742, - 186.661, - 200.898, - 143.101, - 139.57, - 152.94, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.382, - 86.896, - 139.948, - 201.787, - 212.323, - 224.491, - 234.264, - 203.231, - 206.907, - 180.881, - 188.957, - 199.05, - 141.327, - 140.342, - 153.733, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 54.955, - 69.465, - 103.77, - 151.384, - 211.654, - 220.078, - 217.101, - 195.287, - 205.914, - 183.267, - 189.603, - 200.371, - 122.548, - 86.155, - 117.506, - 80.336, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.171, - 19.119, - 70.932, - 63.4, - 111.79, - 110.371, - 146.969, - 128.061, - 126.444, - 103.889, - 123.336, - 101.185, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.589, - 85.089, - 139.463, - 200.103, - 195.595, - 194.029, - 195.042, - 176.442, - 172.632, - 149.848, - 168.86, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.765, - 80.438, - 139.71, - 199.763, - 195.81, - 203.143, - 214.887, - 211.501, - 193.875, - 169.021, - 176.941, - 187.748, - 138.656, - 137.563, - 150.941, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.956, - 77.843, - 140.69, - 208.893, - 195.157, - 193.45, - 194.377, - 184.163, - 172.524, - 150.111, - 170.777, - 185.076, - 136.677, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 58.108, - 87.421, - 141.895, - 200.142, - 195.482, - 193.989, - 193.114, - 166.478, - 173.03, - 150.375, - 169.57, - 185.303, - 137.121, - 137.101, - 151.285, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.214, - 88.234, - 137.925, - 196.406, - 192.225, - 190.901, - 186.944, - 164.343, - 170.816, - 148.859, - 168.949, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 59.146, - 69.363, - 103.663, - 149.806, - 193.817, - 192.518, - 190.317, - 166.702, - 172.923, - 153.098, - 171.543, - 185.528, - 119.145, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 14.618, - 70.094, - 61.59, - 118.817, - 115.63, - 159.585, - 156.089, - 144.667, - 104.289, - 122.61, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.25, - 86.112, - 137.902, - 200.013, - 205.771, - 204.725, - 201.381, - 198.525, - 173.497, - 151.01, - 170.363, - 185.381, - 136.901, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.08, - 86.083, - 140.465, - 202.256, - 216.386, - 234.798, - 247.147, - 222.799, - 229.333, - 196.382, - 195.464, - 201.178, - 143.589, - 140.767, - 154.018, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.575, - 85.703, - 140.372, - 200.971, - 200.856, - 208.577, - 213.158, - 188.026, - 194.457, - 171.583, - 187.777, - 191.799, - 140.582, - 139.346, - 152.156, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 14.003, - 69.698, - 72.548, - 112.366, - 110.629, - 147.1, - 138.097, - 124.893, - 106.936, - 122.608, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.472, - 86.548, - 139.579, - 197.98, - 193.48, - 191.894, - 191.955, - 166.455, - 172.964, - 150.476, - 171.629, - 184.874, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 58.961, - 62.496, - 104.747, - 150.482, - 194.641, - 192.972, - 193.976, - 177.193, - 171.786, - 149.418, - 169.481, - 184.831, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 14.039, - 69.12, - 62.578, - 112.176, - 110.397, - 146.691, - 129.936, - 124.641, - 101.779, - 121.338, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.177, - 80.163, - 140.351, - 199.751, - 198.322, - 205.564, - 216.868, - 203.088, - 199.409, - 175.349, - 189.242, - 197.633, - 141.465, - 139.197, - 151.715, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.859, - 79.627, - 139.165, - 209.028, - 201.823, - 203.624, - 206.222, - 194.335, - 175.542, - 152.239, - 171.14, - 185.693, - 136.721, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.403, - 79.709, - 139.752, - 200.698, - 196.028, - 195.353, - 199.102, - 193.596, - 177.277, - 154.198, - 173.357, - 187.306, - 137.556, - 136.693, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.31, - 84.707, - 141.332, - 200.031, - 195.907, - 196.362, - 198.206, - 171.612, - 175.956, - 193.795, - 205.787, - 217.926, - 160.331, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.044, - 77.898, - 134.948, - 203.179, - 196.445, - 197.941, - 196.803, - 196.976, - 198.62, - 161.784, - 169.782, - 184.831, - 136.613, - 136.613, - 150.799, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 63.269, - 66.668, - 107.605, - 158.601, - 202.805, - 204.645, - 202.821, - 182.824, - 189.713, - 190.56, - 171.125, - 184.831, - 118.91, - 83.647, - 115.624, - 80.35, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 12.522, - 63.76, - 62.998, - 117.366, - 126.958, - 161.718, - 159.111, - 161.633, - 125.178, - 123.478, - 102.057, - 66.759, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 65.086, - 84.424, - 131.174, - 200.054, - 207.701, - 207.967, - 205.901, - 202.881, - 196.272, - 149.981, - 170.939, - 184.831, - 136.613, - 136.613, - 150.798, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.307, - 83.846, - 140.814, - 198.637, - 194.64, - 198.995, - 204.077, - 174.5, - 175.925, - 152.886, - 175.869, - 185.245, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.609, - 83.358, - 141.56, - 200.156, - 195.854, - 194.178, - 202.329, - 170.728, - 180.885, - 154.515, - 173.972, - 185.349, - 137.112, - 136.764, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.636, - 83.136, - 141.455, - 199.678, - 195.271, - 193.464, - 194.468, - 180.626, - 172.468, - 149.949, - 173.277, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.106, - 83.415, - 140.96, - 199.123, - 194.343, - 193.374, - 195.077, - 171.505, - 173.209, - 151.159, - 174.726, - 186.027, - 137.452, - 136.655, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.204, - 65.707, - 105.441, - 150.651, - 196.988, - 197.188, - 193.928, - 176.589, - 171.915, - 149.29, - 173.08, - 184.831, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 16.641, - 71.193, - 63.25, - 111.69, - 109.463, - 145.31, - 143.498, - 141.037, - 117.74, - 125.075, - 101.185, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.347, - 33.392, - 33.37, - 68.291, - 83.312, - 142.468, - 206.67, - 208.64, - 193.568, - 196.85, - 202.551, - 198.195, - 157.538, - 170.225, - 184.831, - 136.625, - 137.045, - 151.62, - 60.908, - 33.107, - 33.107, - 33.107, - 33.25, - 33.265, - 33.803, - 34.096, - 34.422, - 68.957, - 83.857, - 141.893, - 199.18, - 194.285, - 192.169, - 193.06, - 171.102, - 171.427, - 149.016, - 169.589, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.314, - 33.582, - 34.004, - 34.072, - 34.376, - 68.876, - 83.535, - 141.3, - 199.146, - 194.307, - 192.453, - 193.448, - 171.274, - 171.518, - 149.045, - 169.457, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.402, - 33.526, - 33.539, - 33.8, - 34.142, - 68.678, - 82.725, - 137.268, - 200.399, - 196.191, - 194.965, - 195.45, - 189.223, - 172.453, - 149.621, - 169.597, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.216, - 33.336, - 68.178, - 81.895, - 138.028, - 200.153, - 204.961, - 205.242, - 206.97, - 198.383, - 196.07, - 149.566, - 171.006, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.533, - 64.676, - 106.109, - 150.964, - 194.032, - 192.298, - 194.107, - 173.1, - 171.977, - 149.65, - 170.32, - 185.423, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 16.076, - 70.66, - 62.868, - 112.727, - 114.806, - 157.529, - 133.174, - 132.908, - 112.566, - 127.886, - 102.532, - 66.24, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.493, - 80.651, - 132.229, - 200.848, - 208.105, - 226.541, - 229.241, - 237.663, - 204.388, - 169.383, - 182.277, - 188.87, - 139.612, - 138.654, - 152.061, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.138, - 81.518, - 141.743, - 200.846, - 209.387, - 226.829, - 231.114, - 208.021, - 200.734, - 174.308, - 188.582, - 197.763, - 143.151, - 141.391, - 154.606, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.557, - 81.207, - 142.401, - 201.892, - 212.062, - 227.746, - 240.014, - 219.52, - 209.157, - 180.777, - 186.945, - 189.712, - 139.845, - 138.591, - 151.877, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.762, - 78.356, - 136.954, - 208.001, - 214.854, - 224.711, - 231.843, - 221.953, - 202.546, - 169.623, - 180.631, - 189.083, - 139.769, - 138.927, - 152.122, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.962, - 80.83, - 143.589, - 201.51, - 201.606, - 213.647, - 204.797, - 185.671, - 181.962, - 159.497, - 175.884, - 188.101, - 138.309, - 137.364, - 150.879, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.192, - 63.621, - 107.616, - 152.741, - 196.474, - 195.343, - 196.199, - 191.069, - 178.325, - 161.261, - 172.621, - 185.794, - 118.899, - 83.472, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.932, - 73.053, - 64.076, - 112.541, - 111.92, - 148.976, - 128.249, - 126.404, - 100.82, - 122.346, - 101.185, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.776, - 82.202, - 141.862, - 199.21, - 194.779, - 205.866, - 230.29, - 206.144, - 192.448, - 166.25, - 173.23, - 185.953, - 137.34, - 136.667, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 15.203, - 71.34, - 62.762, - 112.316, - 120.902, - 167.766, - 150.377, - 143.595, - 112.482, - 123.521, - 101.204, - 65.758, - -0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.91, - 81.387, - 143.348, - 200.969, - 203.823, - 202.233, - 204.403, - 186.67, - 181.591, - 174.25, - 170.858, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.064, - 78.444, - 133.91, - 201.018, - 206.743, - 204.94, - 201.22, - 209.524, - 203.035, - 180.613, - 199.662, - 184.831, - 136.613, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.135, - 77.998, - 139.403, - 208.857, - 206.853, - 200.474, - 200.115, - 197.221, - 198.821, - 192.386, - 202.858, - 216.707, - 138.826, - 136.613, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.848, - 60.576, - 95.256, - 152.759, - 198.283, - 199.419, - 197.375, - 199.527, - 211.776, - 194.287, - 200.462, - 216.707, - 123.493, - 83.472, - 115.415, - 80.182, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.092, - 61.32, - 66.725, - 113.826, - 116.662, - 152.161, - 151.486, - 150.402, - 112.309, - 122.716, - 101.185, - 65.758, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.664, - 80.413, - 144.086, - 202.036, - 196.282, - 193.927, - 203.303, - 187.298, - 170.937, - 152.833, - 166.946, - 184.831, - 136.613, - 136.613, - 150.791, - 60.908, - 33.107, - 33.107 - ], - "annual_emissions_tonnes_NOx": 0.13, - "annual_emissions_tonnes_SO2": 0.03, - "annual_emissions_tonnes_PM25": 0.03, - "lifecycle_emissions_tonnes_NOx": 2.84, - "annual_emissions_tonnes_PM25_bau": 0.03, - "annual_energy_supplied_kwh": 920618.46, - "emissions_region": "California", - "electric_to_storage_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "lifecycle_emissions_tonnes_NOx_bau": 3.11, - "electric_to_load_series_kw_bau": [ - 31.876, - 31.876, - 31.876, - 32.165, - 32.388, - 32.759, - 32.725, - 11.701, - 61.786, - 61.326, - 114.313, - 114.512, - 149.959, - 149.812, - 149.485, - 148.975, - 151.609, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.869, - 78.357, - 131.408, - 197.598, - 197.981, - 198.183, - 198.205, - 198.047, - 197.722, - 197.211, - 199.6, - 216.707, - 168.489, - 168.492, - 150.852, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.547, - 78.334, - 131.506, - 197.95, - 198.04, - 198.239, - 198.265, - 198.12, - 197.785, - 197.262, - 199.85, - 216.707, - 168.518, - 168.721, - 151.093, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.658, - 78.498, - 131.793, - 197.616, - 198.003, - 198.203, - 198.224, - 198.077, - 197.749, - 197.241, - 199.845, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.407, - 78.333, - 132.345, - 198.669, - 198.956, - 199.038, - 199.059, - 198.6, - 198.12, - 197.842, - 200.186, - 217.36, - 169.265, - 169.393, - 151.75, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 32.132, - 32.88, - 32.841, - 33.064, - 71.197, - 61.694, - 96.869, - 149.463, - 197.4, - 197.405, - 197.705, - 198.001, - 197.697, - 197.214, - 199.857, - 216.707, - 150.775, - 115.348, - 115.368, - 80.213, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 32.031, - 32.061, - 32.114, - 11.573, - 60.936, - 60.72, - 114.241, - 114.45, - 149.912, - 149.787, - 149.476, - 148.985, - 151.645, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.587, - 78.487, - 131.798, - 197.622, - 198.02, - 198.249, - 198.278, - 198.133, - 197.814, - 197.293, - 199.909, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.617, - 78.099, - 130.812, - 197.579, - 197.962, - 198.173, - 198.2, - 198.067, - 197.757, - 197.266, - 199.924, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.299, - 77.977, - 131.162, - 197.553, - 197.694, - 198.294, - 199.167, - 198.59, - 198.537, - 198.049, - 200.568, - 216.758, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.17, - 78.033, - 130.748, - 196.626, - 197.819, - 198.059, - 197.698, - 197.593, - 197.702, - 197.125, - 199.923, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.145, - 77.935, - 131.094, - 197.537, - 197.932, - 198.151, - 198.181, - 198.04, - 197.737, - 197.257, - 199.954, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.872, - 60.189, - 95.686, - 149.309, - 197.897, - 198.929, - 201.794, - 205.582, - 207.757, - 203.466, - 199.976, - 217.96, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.513, - 60.248, - 60.792, - 114.469, - 117.858, - 154.315, - 153.88, - 153.884, - 153.086, - 150.402, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.415, - 60.997, - 60.71, - 113.792, - 114.066, - 148.911, - 149.78, - 148.585, - 148.016, - 147.989, - 133.062, - 97.656, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 72.055, - 78.576, - 131.317, - 197.505, - 197.91, - 198.14, - 198.184, - 198.063, - 197.767, - 197.277, - 196.564, - 216.707, - 168.489, - 168.489, - 150.785, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 72.113, - 78.868, - 132.257, - 198.451, - 198.83, - 198.597, - 198.144, - 198.488, - 198.311, - 197.86, - 197.282, - 217.648, - 169.581, - 169.609, - 151.814, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.148, - 33.158, - 33.216, - 72.404, - 78.723, - 131.159, - 196.979, - 197.556, - 197.739, - 197.723, - 197.216, - 197.138, - 196.614, - 196.209, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.35, - 77.96, - 130.38, - 196.666, - 197.001, - 196.956, - 198.149, - 198.04, - 197.099, - 196.914, - 196.209, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.942, - 32.204, - 32.265, - 32.304, - 70.631, - 60.762, - 95.98, - 149.326, - 197.938, - 198.171, - 197.017, - 196.327, - 196.405, - 196.175, - 196.186, - 216.707, - 150.775, - 115.348, - 115.348, - 79.969, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 32.186, - 32.412, - 32.572, - 32.831, - 11.947, - 60.762, - 60.447, - 113.945, - 114.066, - 149.568, - 149.205, - 148.916, - 148.872, - 148.417, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.244, - 33.107, - 71.731, - 78.48, - 131.308, - 197.54, - 197.922, - 198.156, - 198.207, - 198.084, - 197.8, - 197.338, - 196.636, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.252, - 33.274, - 71.623, - 78.3, - 131.238, - 197.515, - 197.393, - 197.785, - 197.896, - 197.791, - 197.705, - 197.246, - 196.591, - 216.721, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.536, - 77.757, - 130.612, - 196.644, - 198.957, - 201.756, - 201.458, - 210.612, - 217.676, - 214.575, - 204.937, - 216.414, - 170.607, - 170.495, - 152.783, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.007, - 77.277, - 130.382, - 196.595, - 198.376, - 212.506, - 224.271, - 233.115, - 237.342, - 237.856, - 229.742, - 235.345, - 180.247, - 171.697, - 152.829, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.525, - 77.29, - 130.764, - 197.345, - 204.03, - 220.137, - 233.125, - 242.381, - 240.403, - 229.2, - 213.147, - 224.624, - 179.883, - 173.853, - 153.127, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 65.393, - 59.681, - 95.73, - 149.484, - 198.15, - 208.065, - 226.654, - 228.412, - 222.99, - 213.882, - 202.456, - 215.369, - 151.001, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.599, - 60.468, - 60.901, - 114.509, - 117.231, - 153.689, - 153.549, - 153.206, - 151.793, - 149.762, - 129.635, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.545, - 78.001, - 131.222, - 197.644, - 198.029, - 198.23, - 198.262, - 197.694, - 197.617, - 196.892, - 196.359, - 213.281, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.015, - 78.188, - 131.586, - 197.599, - 197.678, - 197.851, - 197.86, - 197.703, - 197.478, - 197.092, - 196.449, - 213.281, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.134, - 78.18, - 130.911, - 196.87, - 197.306, - 198.318, - 198.372, - 198.261, - 197.962, - 197.479, - 196.665, - 213.281, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.59, - 78.143, - 131.569, - 197.632, - 197.933, - 198.148, - 198.219, - 198.129, - 197.875, - 197.418, - 196.709, - 213.281, - 168.489, - 168.489, - 150.829, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.73, - 78.289, - 131.789, - 197.953, - 197.805, - 197.917, - 197.848, - 198.222, - 197.929, - 197.479, - 196.811, - 213.281, - 168.604, - 168.804, - 151.24, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 32.006, - 67.647, - 61.139, - 96.146, - 149.46, - 198.072, - 198.287, - 198.327, - 198.203, - 197.928, - 197.48, - 196.82, - 209.854, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.949, - 28.668, - 11.84, - 61.124, - 60.87, - 114.395, - 114.608, - 150.081, - 149.956, - 149.68, - 149.237, - 148.583, - 126.209, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.128, - 78.098, - 131.035, - 197.087, - 197.64, - 197.817, - 197.716, - 197.487, - 197.444, - 196.943, - 196.408, - 209.854, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.707, - 78.319, - 131.663, - 197.585, - 197.984, - 198.213, - 198.279, - 197.862, - 197.584, - 197.219, - 196.584, - 209.854, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.924, - 78.215, - 131.232, - 197.263, - 197.579, - 197.921, - 197.602, - 197.524, - 197.236, - 197.131, - 196.539, - 209.854, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.02, - 78.01, - 131.255, - 197.299, - 197.178, - 197.021, - 197.611, - 197.709, - 197.096, - 196.967, - 196.398, - 209.854, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.812, - 78.663, - 131.282, - 197.247, - 197.386, - 197.732, - 196.625, - 197.542, - 200.173, - 200.899, - 199.787, - 211.431, - 168.632, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 62.819, - 59.797, - 95.252, - 148.275, - 205.083, - 216.793, - 216.111, - 215.997, - 215.695, - 215.091, - 212.459, - 218.694, - 153.011, - 116.124, - 115.542, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.318, - 60.291, - 60.866, - 114.692, - 115.89, - 152.835, - 154.781, - 157.072, - 157.733, - 155.068, - 128.388, - 97.684, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.44, - 77.449, - 131.136, - 203.635, - 219.248, - 231.274, - 241.577, - 249.635, - 243.545, - 237.051, - 225.776, - 224.907, - 172.008, - 170.842, - 152.421, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.389, - 77.467, - 131.191, - 198.477, - 210.472, - 229.884, - 227.574, - 223.398, - 223.014, - 221.217, - 217.127, - 215.655, - 171.592, - 170.477, - 151.9, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.537, - 77.629, - 131.227, - 197.738, - 198.165, - 198.381, - 198.915, - 199.599, - 199.271, - 198.736, - 197.938, - 207.114, - 168.635, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.558, - 77.666, - 131.411, - 197.721, - 198.104, - 198.317, - 198.363, - 198.239, - 197.96, - 197.518, - 196.884, - 206.428, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.161, - 78.23, - 131.631, - 197.742, - 198.083, - 198.374, - 198.549, - 198.471, - 198.083, - 197.668, - 197.202, - 206.818, - 168.947, - 169.073, - 151.421, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 64.059, - 61.256, - 96.619, - 149.523, - 198.105, - 198.32, - 198.363, - 198.247, - 197.961, - 197.28, - 196.305, - 206.428, - 150.775, - 115.348, - 115.357, - 80.121, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.467, - 60.829, - 60.405, - 113.751, - 113.59, - 148.604, - 149.28, - 149.285, - 148.967, - 148.422, - 122.783, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.318, - 60.771, - 60.178, - 112.994, - 113.392, - 150.231, - 149.584, - 149.769, - 149.331, - 148.68, - 122.845, - 97.901, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.194, - 33.723, - 33.906, - 62.098, - 79.048, - 131.743, - 197.712, - 198.095, - 198.315, - 198.373, - 198.275, - 198.02, - 197.568, - 196.933, - 206.464, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.407, - 33.466, - 61.664, - 78.484, - 131.343, - 197.662, - 198.033, - 198.272, - 198.351, - 198.271, - 198.018, - 197.585, - 196.945, - 206.472, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.069, - 78.339, - 130.857, - 196.554, - 196.433, - 197.556, - 197.859, - 197.736, - 197.393, - 197.124, - 196.627, - 206.434, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.098, - 78.238, - 131.635, - 197.887, - 198.308, - 198.455, - 198.511, - 198.5, - 198.226, - 197.747, - 197.045, - 206.453, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 59.852, - 60.516, - 95.945, - 149.615, - 198.219, - 198.395, - 198.405, - 198.264, - 198.019, - 197.625, - 197.002, - 203.027, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.753, - 60.781, - 61.013, - 114.568, - 114.778, - 150.256, - 149.631, - 148.277, - 148.055, - 148.114, - 119.413, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.03, - 78.244, - 131.383, - 197.776, - 198.174, - 198.405, - 198.464, - 198.359, - 198.09, - 197.648, - 196.99, - 203.082, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.179, - 33.342, - 58.029, - 77.989, - 131.436, - 197.884, - 197.874, - 197.965, - 198.517, - 198.495, - 198.201, - 196.286, - 196.315, - 203.009, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.252, - 58.042, - 78.694, - 131.746, - 197.917, - 198.324, - 198.472, - 198.525, - 198.512, - 198.227, - 197.757, - 196.171, - 203.057, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 58.026, - 78.139, - 131.1, - 196.831, - 197.103, - 197.559, - 196.377, - 197.552, - 197.036, - 196.415, - 196.539, - 203.002, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.95, - 77.813, - 131.103, - 197.111, - 197.396, - 197.758, - 197.537, - 197.464, - 197.08, - 196.787, - 196.43, - 203.002, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 56.048, - 60.102, - 95.537, - 149.123, - 197.861, - 198.394, - 201.312, - 215.605, - 219.888, - 212.484, - 207.214, - 205.999, - 151.286, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.188, - 11.79, - 60.602, - 60.561, - 115.042, - 123.776, - 171.9, - 170.413, - 169.808, - 169.753, - 160.491, - 119.948, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.53, - 77.971, - 131.656, - 197.912, - 198.144, - 197.622, - 198.382, - 198.288, - 197.692, - 197.589, - 196.555, - 203.202, - 168.779, - 168.949, - 151.312, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 57.794, - 78.658, - 131.753, - 197.273, - 198.131, - 198.334, - 197.945, - 198.31, - 198.036, - 197.587, - 196.976, - 203.115, - 168.489, - 168.513, - 150.902, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.948, - 78.358, - 131.818, - 197.931, - 197.886, - 198.025, - 197.864, - 197.866, - 197.799, - 197.339, - 197.039, - 203.026, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.726, - 78.008, - 131.453, - 197.95, - 198.319, - 198.478, - 198.517, - 198.41, - 198.133, - 197.687, - 196.858, - 199.67, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.283, - 77.865, - 131.526, - 197.872, - 198.224, - 198.391, - 198.373, - 198.214, - 197.986, - 197.272, - 196.815, - 199.711, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 52.499, - 60.453, - 96.011, - 149.654, - 198.231, - 198.429, - 198.462, - 198.354, - 198.07, - 197.633, - 197.016, - 199.728, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.794, - 60.471, - 60.319, - 114.299, - 114.283, - 149.705, - 149.9, - 149.587, - 149.416, - 148.911, - 113.142, - 80.606, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.58, - 81.11, - 131.093, - 197.39, - 197.938, - 198.31, - 198.489, - 198.529, - 198.403, - 198.115, - 197.67, - 197.039, - 151.529, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.114, - 81.462, - 131.326, - 197.47, - 197.912, - 198.276, - 198.478, - 198.527, - 198.408, - 198.12, - 197.681, - 197.056, - 151.547, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.056, - 81.419, - 131.221, - 197.431, - 197.902, - 198.223, - 198.405, - 198.442, - 198.343, - 198.087, - 197.662, - 197.05, - 151.55, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.766, - 78.563, - 131.633, - 197.506, - 197.948, - 198.315, - 198.496, - 198.527, - 198.406, - 198.107, - 197.662, - 197.047, - 151.546, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.75, - 78.512, - 131.48, - 197.379, - 197.829, - 198.158, - 198.311, - 198.392, - 198.313, - 198.07, - 197.663, - 197.066, - 151.565, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.962, - 60.504, - 95.902, - 149.234, - 197.989, - 198.358, - 198.521, - 198.564, - 198.478, - 198.198, - 197.573, - 196.819, - 133.797, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.421, - 60.772, - 60.884, - 114.388, - 114.744, - 150.31, - 150.343, - 150.222, - 149.946, - 149.504, - 113.466, - 80.735, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.432, - 78.291, - 131.436, - 197.501, - 198.019, - 198.374, - 198.525, - 198.556, - 198.407, - 198.11, - 197.68, - 197.087, - 151.585, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.716, - 78.491, - 131.434, - 197.087, - 197.799, - 198.038, - 197.998, - 198.01, - 197.942, - 197.508, - 197.649, - 197.06, - 148.146, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.388, - 78.32, - 131.696, - 197.724, - 198.33, - 198.837, - 199.093, - 198.809, - 198.365, - 198.087, - 198.019, - 197.605, - 148.629, - 169.243, - 151.676, - 60.908, - 33.107, - 33.107, - 33.107, - 33.232, - 33.608, - 33.8, - 34.179, - 34.375, - 69.002, - 79.472, - 132.259, - 197.841, - 197.857, - 198.134, - 198.297, - 198.38, - 198.319, - 198.081, - 197.654, - 197.051, - 148.145, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 68.216, - 78.52, - 131.571, - 197.183, - 197.484, - 198.122, - 198.041, - 198.026, - 197.862, - 197.768, - 197.598, - 196.772, - 148.071, - 168.489, - 150.809, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.844, - 60.728, - 96.195, - 148.973, - 197.679, - 198.237, - 198.403, - 198.415, - 198.275, - 197.491, - 197.423, - 196.806, - 130.415, - 115.348, - 115.348, - 79.955, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.443, - 61.169, - 60.729, - 114.231, - 114.614, - 150.244, - 150.287, - 149.973, - 150.137, - 149.714, - 113.397, - 77.289, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.626, - 77.993, - 131.172, - 197.492, - 198.27, - 202.73, - 205.711, - 204.484, - 205.411, - 205.217, - 204.375, - 199.632, - 149.443, - 168.633, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.543, - 78.009, - 131.385, - 197.511, - 197.995, - 198.314, - 198.486, - 198.546, - 198.425, - 198.146, - 197.695, - 196.524, - 148.168, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.544, - 78.032, - 131.207, - 197.438, - 197.898, - 200.209, - 211.74, - 214.552, - 214.045, - 213.221, - 206.057, - 200.116, - 149.283, - 168.584, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.492, - 77.929, - 130.82, - 197.099, - 197.911, - 204.942, - 212.804, - 214.605, - 215.671, - 216.096, - 214.491, - 209.688, - 152.195, - 170.015, - 151.616, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.478, - 77.547, - 130.993, - 197.593, - 198.706, - 210.662, - 226.437, - 234.334, - 232.707, - 225.533, - 218.405, - 212.375, - 153.034, - 169.595, - 151.14, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 62.392, - 59.833, - 95.516, - 149.322, - 209.589, - 225.987, - 232.107, - 231.126, - 233.294, - 237.1, - 233.403, - 221.214, - 136.33, - 116.045, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.487, - 60.726, - 60.954, - 114.497, - 114.854, - 150.394, - 150.428, - 150.355, - 150.043, - 149.583, - 113.511, - 77.361, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.441, - 78.283, - 131.591, - 197.625, - 198.068, - 198.39, - 198.547, - 198.544, - 198.024, - 198.139, - 197.708, - 197.114, - 148.213, - 165.063, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.438, - 78.226, - 131.452, - 197.289, - 197.593, - 198.15, - 198.34, - 198.411, - 198.325, - 198.084, - 197.66, - 197.082, - 148.198, - 165.063, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.356, - 78.172, - 131.376, - 197.102, - 197.706, - 198.314, - 198.511, - 198.559, - 198.445, - 198.167, - 197.734, - 197.12, - 148.213, - 165.063, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.303, - 78.15, - 131.503, - 197.639, - 198.126, - 198.457, - 198.603, - 198.643, - 198.55, - 198.246, - 197.116, - 197.119, - 148.213, - 165.063, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.61, - 78.001, - 131.323, - 197.627, - 198.133, - 198.488, - 198.609, - 198.64, - 198.517, - 198.216, - 197.755, - 197.124, - 148.222, - 165.063, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 59.181, - 60.162, - 95.811, - 149.393, - 198.09, - 198.395, - 198.539, - 198.529, - 198.392, - 198.242, - 198.076, - 197.465, - 130.772, - 111.994, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.491, - 60.26, - 60.744, - 116.645, - 129.278, - 173.128, - 171.701, - 171.356, - 171.508, - 169.721, - 122.453, - 78.797, - 28.45, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.012, - 77.568, - 131.028, - 197.543, - 199.006, - 203.411, - 203.498, - 203.442, - 203.344, - 202.912, - 202.321, - 201.494, - 149.93, - 165.733, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.309, - 77.755, - 131.156, - 197.597, - 198.066, - 199.796, - 204.394, - 202.072, - 201.979, - 201.75, - 201.122, - 200.262, - 150.286, - 165.94, - 150.896, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.172, - 77.486, - 131.141, - 197.033, - 198.098, - 196.58, - 197.424, - 200.864, - 219.001, - 228.012, - 245.485, - 253.714, - 195.654, - 198.018, - 171.933, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.633, - 77.33, - 131.053, - 200.225, - 216.941, - 227.993, - 235.449, - 240.219, - 238.187, - 234.288, - 232.12, - 225.908, - 168.393, - 174.865, - 152.221, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.969, - 77.293, - 131.039, - 198.044, - 210.901, - 225.469, - 237.72, - 238.623, - 233.493, - 227.738, - 222.762, - 217.373, - 160.437, - 167.277, - 151.574, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 55.532, - 59.946, - 95.732, - 149.478, - 198.183, - 198.729, - 199.381, - 199.405, - 199.291, - 199.019, - 198.548, - 197.906, - 131.159, - 111.973, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.176, - 11.552, - 60.549, - 60.812, - 114.374, - 114.622, - 150.165, - 150.262, - 150.411, - 150.16, - 149.746, - 113.55, - 77.395, - 28.45, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.759, - 77.607, - 131.06, - 197.571, - 198.001, - 200.19, - 207.008, - 209.226, - 209.49, - 210.704, - 210.531, - 210.047, - 156.984, - 163.131, - 151.564, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.733, - 77.634, - 131.089, - 197.55, - 197.947, - 198.198, - 198.343, - 198.406, - 198.33, - 198.079, - 197.674, - 197.109, - 148.254, - 161.636, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.881, - 77.779, - 131.191, - 197.562, - 197.694, - 197.941, - 198.439, - 198.449, - 198.34, - 198.078, - 197.685, - 196.911, - 148.265, - 161.639, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.892, - 77.742, - 131.126, - 197.581, - 197.992, - 198.395, - 200.054, - 201.852, - 201.679, - 201.415, - 200.952, - 200.249, - 149.663, - 162.36, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.647, - 77.671, - 131.149, - 197.524, - 197.949, - 198.272, - 198.392, - 198.354, - 198.182, - 197.899, - 197.562, - 197.059, - 148.248, - 161.636, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 55.77, - 60.152, - 95.945, - 149.336, - 197.944, - 198.198, - 198.312, - 198.318, - 198.213, - 197.982, - 197.607, - 197.08, - 130.543, - 108.495, - 115.392, - 80.169, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.757, - 11.556, - 61.412, - 61.31, - 114.523, - 115.13, - 150.474, - 150.434, - 150.287, - 149.839, - 149.421, - 113.456, - 77.432, - 25.024, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 54.881, - 78.843, - 132.061, - 198.433, - 198.734, - 198.99, - 199.086, - 198.651, - 198.404, - 198.128, - 197.716, - 197.151, - 148.386, - 161.993, - 151.239, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 54.919, - 78.719, - 131.951, - 197.849, - 198.021, - 197.999, - 197.271, - 197.482, - 197.587, - 196.663, - 196.622, - 196.451, - 148.009, - 161.636, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.96, - 78.085, - 131.239, - 197.062, - 197.247, - 196.691, - 197.557, - 197.976, - 197.79, - 197.115, - 197.259, - 196.833, - 148.279, - 161.636, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.582, - 77.916, - 131.437, - 197.678, - 198.069, - 198.376, - 198.544, - 198.566, - 197.277, - 197.605, - 196.756, - 196.499, - 147.99, - 161.636, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.638, - 77.888, - 131.362, - 197.655, - 198.083, - 198.377, - 198.516, - 198.492, - 198.346, - 198.06, - 197.663, - 197.099, - 148.279, - 161.636, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 52.22, - 60.12, - 95.932, - 149.411, - 198.058, - 198.365, - 198.478, - 198.428, - 198.26, - 197.974, - 197.601, - 197.102, - 130.877, - 108.911, - 115.771, - 80.478, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.777, - 11.612, - 61.439, - 61.381, - 114.553, - 114.661, - 150.152, - 150.11, - 149.988, - 149.747, - 149.38, - 113.412, - 77.407, - 21.597, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 53.668, - 78.176, - 131.73, - 197.847, - 198.096, - 198.423, - 198.517, - 198.428, - 198.319, - 198.045, - 197.629, - 197.129, - 148.307, - 158.337, - 150.979, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.603, - 78.155, - 131.48, - 197.633, - 198.036, - 198.306, - 198.409, - 200.941, - 203.978, - 208.98, - 210.422, - 209.436, - 153.967, - 158.601, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.141, - 77.818, - 131.204, - 197.589, - 197.978, - 198.235, - 198.333, - 198.288, - 199.825, - 202.535, - 201.991, - 201.22, - 148.805, - 158.244, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.968, - 77.728, - 131.143, - 197.562, - 197.95, - 198.216, - 198.322, - 198.306, - 198.159, - 197.931, - 197.561, - 197.046, - 148.273, - 158.21, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.868, - 77.725, - 131.168, - 197.494, - 197.863, - 198.155, - 198.311, - 198.343, - 198.235, - 197.994, - 197.605, - 197.072, - 148.284, - 158.215, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 48.735, - 60.07, - 95.784, - 149.315, - 197.78, - 198.103, - 198.134, - 198.48, - 198.353, - 197.713, - 197.495, - 196.993, - 130.548, - 105.079, - 115.348, - 79.942, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.376, - 11.657, - 60.681, - 60.846, - 114.381, - 114.656, - 150.253, - 148.779, - 148.955, - 149.925, - 149.509, - 113.193, - 77.463, - 21.603, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.485, - 78.178, - 131.51, - 196.943, - 198.101, - 198.405, - 198.567, - 198.307, - 197.224, - 196.383, - 197.467, - 196.857, - 148.332, - 158.228, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.257, - 77.804, - 131.254, - 197.681, - 197.55, - 198.378, - 198.504, - 198.49, - 197.697, - 197.704, - 197.639, - 197.087, - 148.293, - 158.217, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.15, - 77.804, - 131.151, - 197.553, - 197.949, - 198.232, - 198.396, - 198.424, - 198.98, - 200.775, - 200.307, - 199.653, - 150.72, - 158.218, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 50.137, - 77.854, - 131.215, - 197.594, - 198.008, - 198.316, - 202.558, - 208.58, - 209.816, - 209.902, - 209.614, - 208.547, - 154.501, - 159.088, - 150.792, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.923, - 77.681, - 131.136, - 197.605, - 198.018, - 199.991, - 210.455, - 215.186, - 215.302, - 216.774, - 216.146, - 214.754, - 162.381, - 161.347, - 151.387, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.501, - 59.957, - 95.74, - 149.424, - 198.051, - 198.37, - 198.558, - 210.345, - 220.083, - 221.632, - 221.123, - 219.99, - 145.07, - 103.859, - 115.584, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.373, - 11.668, - 60.528, - 60.975, - 114.524, - 114.788, - 150.352, - 150.341, - 150.259, - 150.208, - 149.802, - 113.748, - 77.498, - 18.205, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.857, - 77.746, - 131.223, - 197.686, - 198.094, - 198.377, - 198.528, - 200.139, - 204.02, - 204.241, - 204.069, - 203.631, - 155.359, - 155.587, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.772, - 77.707, - 131.194, - 197.682, - 198.114, - 198.41, - 198.562, - 198.503, - 198.973, - 201.307, - 201.225, - 199.022, - 148.735, - 154.819, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.66, - 77.536, - 131.158, - 197.64, - 198.048, - 198.329, - 198.486, - 198.639, - 200.403, - 200.962, - 200.139, - 198.593, - 148.63, - 154.821, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.732, - 77.654, - 131.164, - 197.658, - 198.094, - 198.402, - 198.564, - 198.585, - 198.441, - 199.751, - 199.872, - 199.211, - 148.389, - 154.828, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.87, - 77.737, - 131.234, - 197.659, - 198.037, - 198.267, - 198.375, - 198.367, - 198.266, - 198.031, - 197.675, - 197.137, - 148.347, - 154.835, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.957, - 60.248, - 96.048, - 149.458, - 198.178, - 198.352, - 198.421, - 198.397, - 198.247, - 197.967, - 197.614, - 197.123, - 130.635, - 101.693, - 115.355, - 80.138, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.376, - 11.65, - 61.091, - 61.106, - 114.366, - 114.591, - 150.112, - 150.066, - 149.908, - 149.716, - 149.401, - 113.466, - 77.486, - 18.219, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.514, - 78.057, - 131.34, - 197.549, - 197.942, - 198.225, - 198.382, - 198.408, - 198.297, - 198.045, - 197.662, - 197.13, - 148.345, - 154.837, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 50.307, - 77.912, - 131.266, - 197.572, - 197.932, - 198.262, - 201.186, - 206.695, - 209.62, - 209.848, - 209.486, - 208.626, - 159.033, - 157.041, - 150.811, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.764, - 77.597, - 131.106, - 197.542, - 197.922, - 199.742, - 208.054, - 212.171, - 212.198, - 212.071, - 211.594, - 210.818, - 159.957, - 156.537, - 150.932, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.759, - 77.62, - 130.964, - 197.622, - 198.031, - 197.871, - 198.463, - 198.465, - 198.343, - 201.022, - 203.578, - 202.897, - 151.453, - 155.007, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.82, - 77.658, - 131.185, - 197.665, - 198.079, - 198.368, - 198.518, - 198.531, - 198.414, - 198.149, - 197.747, - 197.196, - 148.386, - 154.861, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.914, - 60.199, - 95.968, - 149.445, - 198.079, - 198.379, - 198.522, - 198.533, - 198.402, - 198.134, - 197.738, - 197.183, - 130.668, - 98.288, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.4, - 11.68, - 60.738, - 60.892, - 114.327, - 114.602, - 150.608, - 167.915, - 165.794, - 157.515, - 157.019, - 114.859, - 77.588, - 14.824, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.386, - 11.661, - 60.285, - 60.902, - 132.048, - 135.402, - 166.907, - 168.401, - 170.389, - 170.444, - 169.738, - 130.538, - 87.346, - 14.817, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.437, - 77.423, - 131.116, - 198.195, - 211.705, - 235.053, - 252.899, - 261.447, - 261.569, - 254.971, - 246.972, - 240.612, - 183.692, - 178.883, - 168.732, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.364, - 77.406, - 131.681, - 226.602, - 235.713, - 241.975, - 244.944, - 246.708, - 247.286, - 246.021, - 243.686, - 238.624, - 182.275, - 176.94, - 166.821, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.363, - 77.402, - 130.926, - 196.931, - 200.588, - 210.577, - 217.727, - 223.872, - 224.602, - 225.747, - 224.432, - 222.984, - 168.471, - 160.833, - 151.862, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.608, - 77.459, - 131.094, - 197.567, - 197.926, - 198.178, - 198.35, - 198.185, - 197.673, - 197.768, - 197.527, - 196.937, - 148.277, - 151.418, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.973, - 60.116, - 95.573, - 148.602, - 197.56, - 197.818, - 198.064, - 198.053, - 197.952, - 197.057, - 196.958, - 196.732, - 130.458, - 98.291, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.394, - 11.661, - 60.49, - 60.752, - 114.264, - 114.507, - 150.011, - 149.958, - 149.835, - 149.642, - 149.327, - 113.419, - 77.504, - 14.841, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.802, - 77.668, - 131.134, - 197.523, - 197.899, - 198.17, - 198.322, - 198.353, - 198.252, - 198.013, - 197.644, - 197.147, - 148.386, - 151.469, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.836, - 77.578, - 130.822, - 196.563, - 196.656, - 197.866, - 197.647, - 198.386, - 198.305, - 197.66, - 197.687, - 197.152, - 148.388, - 151.436, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 50.074, - 77.807, - 131.248, - 197.618, - 198.031, - 198.319, - 198.479, - 198.536, - 198.625, - 199.03, - 198.631, - 198.065, - 148.549, - 151.477, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.777, - 77.676, - 131.231, - 197.711, - 198.148, - 198.445, - 199.479, - 203.489, - 206.401, - 207.604, - 207.12, - 206.32, - 156.823, - 152.569, - 150.818, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.857, - 77.743, - 131.41, - 197.758, - 198.167, - 198.453, - 198.57, - 198.456, - 198.436, - 198.169, - 197.774, - 197.235, - 148.435, - 151.5, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.542, - 59.924, - 95.765, - 149.428, - 198.022, - 198.266, - 198.385, - 198.366, - 199.875, - 200.703, - 200.328, - 199.805, - 130.691, - 98.349, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.386, - 11.654, - 60.564, - 60.85, - 114.329, - 114.567, - 150.1, - 150.09, - 149.989, - 149.78, - 149.439, - 113.526, - 77.555, - 14.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.706, - 77.584, - 131.117, - 197.564, - 197.96, - 198.248, - 198.414, - 198.479, - 199.859, - 201.002, - 200.556, - 199.954, - 148.702, - 151.5, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.65, - 77.555, - 131.142, - 197.646, - 197.99, - 198.271, - 198.5, - 198.52, - 199.908, - 202.839, - 203.095, - 202.418, - 150.68, - 151.566, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.573, - 77.457, - 131.159, - 197.631, - 198.033, - 198.318, - 198.591, - 201.629, - 203.016, - 204.906, - 206.64, - 205.71, - 153.635, - 148.709, - 150.853, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.631, - 77.549, - 131.143, - 197.595, - 197.949, - 198.167, - 198.241, - 198.236, - 198.192, - 198.02, - 197.686, - 197.185, - 148.411, - 148.063, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.614, - 77.479, - 131.108, - 197.53, - 197.917, - 198.194, - 198.998, - 202.415, - 205.02, - 207.329, - 207.295, - 206.634, - 157.437, - 153.445, - 151.035, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.19, - 59.686, - 95.691, - 149.367, - 198.052, - 204.29, - 213.137, - 221.06, - 222.596, - 222.156, - 221.656, - 220.124, - 145.747, - 98.037, - 115.632, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.395, - 11.65, - 60.269, - 60.792, - 114.31, - 114.55, - 151.861, - 155.448, - 158.752, - 161.712, - 161.12, - 115.472, - 77.64, - 11.454, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.592, - 77.457, - 131.122, - 197.577, - 197.94, - 198.159, - 200.225, - 202.302, - 202.243, - 202.012, - 201.515, - 200.84, - 149.004, - 148.454, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.72, - 77.518, - 131.099, - 197.529, - 198.568, - 202.561, - 203.808, - 211.375, - 214.676, - 214.528, - 213.722, - 212.629, - 162.676, - 153.584, - 151.363, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.625, - 77.494, - 131.093, - 197.533, - 197.9, - 198.661, - 204.952, - 210.247, - 211.829, - 211.452, - 210.608, - 209.644, - 160.303, - 151.846, - 151.081, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.625, - 77.47, - 131.105, - 197.553, - 197.938, - 201.587, - 210.595, - 211.477, - 214.201, - 215.703, - 214.857, - 213.411, - 161.33, - 150.72, - 151.184, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.339, - 77.381, - 131.092, - 197.533, - 197.923, - 201.993, - 211.4, - 219.362, - 223.458, - 225.11, - 223.537, - 222.029, - 168.694, - 158.499, - 151.966, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.106, - 59.665, - 95.656, - 149.302, - 198.816, - 222.072, - 230.131, - 228.075, - 229.314, - 230.975, - 231.874, - 229.917, - 149.408, - 98.463, - 115.77, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.387, - 11.615, - 60.131, - 60.603, - 114.236, - 114.5, - 150.048, - 150.589, - 153.351, - 155.183, - 155.592, - 116.929, - 77.883, - 11.447, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.46, - 77.391, - 131.01, - 197.422, - 197.798, - 198.454, - 205.724, - 212.76, - 219.263, - 222.379, - 221.338, - 219.283, - 162.647, - 151.066, - 151.328, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.494, - 77.392, - 131.04, - 197.438, - 197.804, - 198.44, - 208.941, - 215.481, - 215.395, - 214.34, - 213.577, - 213.338, - 160.529, - 149.284, - 151.007, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.511, - 77.394, - 131.047, - 197.483, - 197.854, - 199.418, - 205.382, - 212.203, - 215.591, - 215.35, - 214.507, - 213.027, - 159.858, - 149.928, - 151.256, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.644, - 77.426, - 131.102, - 208.855, - 225.202, - 235.04, - 241.845, - 248.509, - 250.113, - 247.926, - 243.72, - 239.029, - 182.067, - 173.751, - 168.609, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 26.254, - 49.349, - 77.393, - 131.159, - 209.292, - 219.07, - 225.6, - 231.261, - 237.241, - 244.178, - 248.092, - 245.753, - 239.604, - 183.305, - 171.517, - 165.669, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 48.18, - 59.655, - 95.679, - 160.389, - 224.706, - 237.013, - 243.426, - 248.123, - 249.595, - 250.676, - 249.718, - 243.889, - 161.974, - 112.507, - 120.306, - 80.07, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.365, - 11.604, - 60.257, - 60.793, - 114.309, - 114.543, - 150.117, - 150.149, - 150.057, - 149.845, - 149.498, - 113.584, - 77.601, - 11.477, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.51, - 77.402, - 131.115, - 197.594, - 197.985, - 198.252, - 198.407, - 200.191, - 202.558, - 207.423, - 209.434, - 208.604, - 159.324, - 158.255, - 154.363, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.448, - 77.376, - 131.109, - 197.567, - 204.422, - 217.272, - 221.23, - 225.853, - 229.423, - 232.84, - 232.204, - 229.879, - 175.352, - 165.814, - 160.19, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.363, - 11.601, - 60.22, - 60.71, - 114.163, - 114.413, - 149.618, - 150.03, - 149.875, - 149.671, - 149.341, - 113.496, - 77.554, - 11.446, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.338, - 77.361, - 131.012, - 197.431, - 197.792, - 198.05, - 200.553, - 206.438, - 209.385, - 212.161, - 211.728, - 210.746, - 161.21, - 156.634, - 151.861, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.358, - 77.398, - 131.0, - 197.419, - 197.784, - 198.051, - 198.21, - 198.859, - 202.889, - 205.547, - 205.656, - 205.042, - 155.94, - 155.151, - 152.202, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.105, - 59.643, - 95.611, - 149.278, - 197.887, - 198.173, - 205.417, - 223.655, - 235.753, - 237.333, - 235.864, - 233.576, - 153.504, - 104.874, - 116.392, - 79.977, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.366, - 11.585, - 60.203, - 60.748, - 114.292, - 114.577, - 153.245, - 157.446, - 167.583, - 177.716, - 178.856, - 140.623, - 93.214, - 11.469, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.331, - 77.351, - 133.342, - 229.275, - 234.922, - 240.434, - 246.703, - 252.15, - 256.308, - 258.3, - 254.161, - 247.744, - 188.869, - 177.08, - 171.21, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.337, - 77.304, - 135.833, - 226.347, - 240.963, - 251.914, - 255.224, - 258.52, - 261.024, - 265.931, - 266.733, - 261.251, - 202.442, - 189.129, - 179.807, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.344, - 77.374, - 135.118, - 233.077, - 244.994, - 254.22, - 256.669, - 258.264, - 258.834, - 258.244, - 253.404, - 246.375, - 189.283, - 178.504, - 171.283, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.32, - 77.342, - 131.066, - 212.631, - 234.252, - 248.323, - 254.392, - 258.325, - 260.379, - 257.538, - 251.838, - 244.116, - 186.721, - 174.967, - 167.839, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.316, - 77.33, - 131.057, - 197.778, - 203.491, - 218.098, - 229.175, - 232.449, - 234.291, - 234.818, - 233.318, - 230.655, - 175.949, - 166.179, - 157.499, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 48.061, - 59.568, - 95.461, - 148.955, - 198.319, - 209.308, - 223.211, - 230.211, - 231.552, - 232.613, - 231.967, - 230.65, - 155.016, - 108.288, - 117.925, - 79.99, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.341, - 11.562, - 60.133, - 60.637, - 114.152, - 114.434, - 155.186, - 168.866, - 174.21, - 177.08, - 177.174, - 132.734, - 85.498, - 11.431, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.32, - 77.319, - 131.006, - 197.463, - 197.854, - 204.933, - 216.132, - 224.547, - 229.295, - 232.796, - 230.848, - 228.366, - 174.759, - 166.084, - 159.964, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.314, - 77.322, - 131.04, - 197.512, - 205.636, - 218.2, - 224.222, - 229.066, - 232.689, - 235.638, - 236.28, - 234.712, - 178.969, - 169.655, - 165.776, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.312, - 77.321, - 131.047, - 197.526, - 197.929, - 198.213, - 204.052, - 211.414, - 212.788, - 213.665, - 214.652, - 213.933, - 164.869, - 165.399, - 156.431, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 29.681, - 49.31, - 77.316, - 131.035, - 197.51, - 197.912, - 202.304, - 212.438, - 223.216, - 231.407, - 234.601, - 234.122, - 232.274, - 180.029, - 175.51, - 167.43, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.31, - 77.312, - 131.041, - 200.388, - 227.034, - 245.521, - 252.088, - 256.252, - 258.014, - 259.582, - 254.455, - 247.8, - 188.506, - 179.355, - 170.69, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 48.081, - 59.603, - 95.594, - 149.277, - 208.379, - 229.878, - 240.184, - 242.173, - 240.897, - 243.822, - 243.89, - 238.849, - 158.523, - 115.638, - 122.218, - 80.188, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.359, - 11.553, - 60.132, - 60.644, - 114.556, - 119.885, - 169.824, - 174.947, - 175.295, - 176.404, - 176.961, - 137.095, - 90.097, - 14.768, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.275, - 77.082, - 130.387, - 198.237, - 214.666, - 234.875, - 244.331, - 255.175, - 256.27, - 262.43, - 255.386, - 245.785, - 187.105, - 180.486, - 171.613, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.314, - 77.309, - 130.97, - 217.049, - 238.644, - 250.839, - 255.026, - 257.302, - 259.442, - 265.608, - 257.123, - 245.41, - 184.83, - 179.315, - 171.492, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.308, - 77.296, - 130.995, - 197.462, - 203.014, - 217.763, - 226.52, - 234.183, - 239.323, - 240.605, - 240.509, - 239.639, - 186.009, - 179.443, - 172.16, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.307, - 77.296, - 130.995, - 199.288, - 216.773, - 236.923, - 242.839, - 247.794, - 249.957, - 248.685, - 248.005, - 243.733, - 185.783, - 179.764, - 171.138, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.309, - 77.297, - 130.979, - 197.434, - 201.751, - 220.837, - 232.025, - 236.5, - 238.235, - 238.541, - 237.495, - 234.908, - 178.49, - 172.816, - 166.763, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 48.079, - 59.588, - 95.559, - 149.228, - 201.346, - 208.822, - 213.227, - 217.649, - 221.298, - 223.976, - 225.358, - 224.812, - 153.484, - 115.708, - 130.113, - 85.304, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.348, - 11.539, - 60.132, - 63.697, - 142.138, - 154.255, - 193.43, - 194.114, - 195.01, - 195.37, - 195.976, - 151.677, - 102.841, - 14.822, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.305, - 77.298, - 130.985, - 197.902, - 214.961, - 234.064, - 244.264, - 250.344, - 252.465, - 254.501, - 251.019, - 244.354, - 185.215, - 178.817, - 170.841, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.303, - 77.298, - 130.972, - 199.383, - 209.334, - 225.161, - 236.979, - 245.021, - 250.269, - 252.866, - 250.82, - 245.486, - 186.793, - 178.637, - 169.942, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.275, - 77.219, - 130.258, - 219.943, - 234.175, - 244.326, - 246.702, - 247.393, - 250.057, - 250.342, - 247.18, - 239.91, - 180.714, - 175.344, - 166.738, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 49.302, - 77.3, - 130.969, - 207.739, - 231.432, - 241.814, - 245.269, - 249.522, - 248.494, - 245.543, - 242.456, - 238.754, - 182.421, - 175.99, - 167.161, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.723, - 77.287, - 130.987, - 201.74, - 215.865, - 226.234, - 233.049, - 238.364, - 242.077, - 243.684, - 239.716, - 231.176, - 171.64, - 168.251, - 153.667, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 51.493, - 59.586, - 95.547, - 149.266, - 207.149, - 220.453, - 229.347, - 234.389, - 235.513, - 235.686, - 235.415, - 232.748, - 152.553, - 110.199, - 116.308, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.766, - 11.569, - 60.125, - 60.657, - 114.21, - 114.511, - 150.115, - 150.16, - 150.058, - 149.843, - 149.469, - 113.536, - 77.521, - 18.22, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.961, - 77.382, - 131.033, - 197.552, - 197.984, - 198.301, - 199.766, - 207.4, - 209.526, - 209.833, - 209.498, - 208.408, - 158.306, - 156.337, - 150.988, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.716, - 77.285, - 131.022, - 214.523, - 232.283, - 244.806, - 253.997, - 264.754, - 268.69, - 263.111, - 257.516, - 252.494, - 195.05, - 192.178, - 181.044, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.716, - 77.286, - 143.585, - 245.552, - 265.924, - 275.913, - 281.055, - 287.524, - 286.29, - 286.604, - 282.944, - 277.399, - 207.562, - 193.572, - 178.575, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.715, - 77.282, - 149.295, - 249.005, - 255.924, - 264.376, - 273.826, - 278.807, - 277.033, - 274.24, - 268.317, - 257.994, - 193.38, - 184.759, - 169.919, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.713, - 77.279, - 131.011, - 197.5, - 202.32, - 214.447, - 220.713, - 225.272, - 228.127, - 230.443, - 228.694, - 225.957, - 169.147, - 165.733, - 153.521, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 51.484, - 59.566, - 95.576, - 153.699, - 229.432, - 246.055, - 254.553, - 255.886, - 257.187, - 259.043, - 259.144, - 251.182, - 166.073, - 124.489, - 130.631, - 83.16, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.757, - 11.516, - 61.486, - 78.433, - 149.651, - 155.419, - 196.645, - 202.392, - 204.54, - 205.204, - 205.776, - 156.105, - 104.859, - 18.196, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.713, - 77.271, - 135.828, - 232.09, - 246.585, - 256.102, - 262.828, - 268.499, - 269.489, - 268.927, - 268.12, - 259.909, - 196.557, - 192.584, - 176.892, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.712, - 77.268, - 133.382, - 230.762, - 244.222, - 257.087, - 266.113, - 270.308, - 272.671, - 268.765, - 259.014, - 247.782, - 182.821, - 180.37, - 165.451, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.71, - 77.284, - 132.409, - 228.136, - 240.934, - 250.334, - 260.798, - 266.984, - 265.591, - 266.083, - 265.641, - 259.132, - 198.495, - 196.651, - 180.49, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 52.709, - 77.281, - 134.702, - 228.899, - 248.385, - 262.438, - 269.03, - 271.686, - 270.958, - 270.18, - 268.348, - 261.618, - 203.389, - 202.534, - 185.334, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.138, - 77.276, - 134.113, - 229.228, - 244.962, - 257.275, - 263.022, - 266.233, - 267.37, - 270.227, - 262.776, - 256.111, - 195.972, - 192.713, - 176.597, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 54.907, - 59.553, - 95.532, - 149.221, - 198.461, - 206.635, - 215.582, - 221.069, - 223.257, - 225.508, - 225.569, - 222.83, - 145.443, - 108.082, - 116.021, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.183, - 11.519, - 60.13, - 60.699, - 114.094, - 114.563, - 153.565, - 165.884, - 173.038, - 174.365, - 173.327, - 127.011, - 78.612, - 21.597, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.136, - 77.269, - 131.001, - 197.498, - 197.907, - 201.197, - 218.98, - 230.587, - 231.911, - 230.99, - 229.668, - 224.654, - 164.211, - 164.213, - 152.035, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.134, - 77.265, - 130.979, - 197.471, - 200.18, - 208.431, - 214.227, - 222.54, - 232.746, - 239.881, - 237.406, - 232.055, - 173.09, - 174.004, - 158.175, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.133, - 77.261, - 130.974, - 197.47, - 199.547, - 211.49, - 222.097, - 230.138, - 237.196, - 243.504, - 240.95, - 235.841, - 178.571, - 184.129, - 165.084, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.133, - 77.271, - 130.998, - 199.076, - 213.606, - 227.262, - 239.159, - 247.51, - 246.787, - 245.234, - 242.83, - 238.494, - 180.223, - 184.525, - 168.283, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.131, - 77.265, - 130.996, - 218.05, - 232.757, - 247.24, - 255.313, - 260.798, - 264.952, - 261.375, - 251.496, - 242.066, - 184.224, - 188.559, - 171.178, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 54.899, - 59.547, - 95.503, - 158.131, - 231.897, - 249.023, - 254.035, - 256.622, - 255.942, - 254.796, - 253.924, - 245.943, - 162.185, - 127.835, - 128.395, - 82.915, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.171, - 11.515, - 60.065, - 60.512, - 125.654, - 136.951, - 178.549, - 181.362, - 182.124, - 180.457, - 179.805, - 138.121, - 93.448, - 25.024, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 77.258, - 130.968, - 220.966, - 238.093, - 249.2, - 256.329, - 262.289, - 260.687, - 258.54, - 252.884, - 245.391, - 186.195, - 188.321, - 169.413, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 77.25, - 130.939, - 200.518, - 216.297, - 229.745, - 236.632, - 241.426, - 242.376, - 241.672, - 239.229, - 236.251, - 180.758, - 184.477, - 165.494, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 77.25, - 130.932, - 197.368, - 202.803, - 215.629, - 222.1, - 226.606, - 232.659, - 236.983, - 236.407, - 234.548, - 178.449, - 181.391, - 163.898, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 77.191, - 130.921, - 197.613, - 207.661, - 228.24, - 242.072, - 247.84, - 247.253, - 245.421, - 244.505, - 238.76, - 183.273, - 190.751, - 169.256, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.128, - 77.258, - 130.897, - 205.114, - 221.54, - 233.027, - 239.47, - 244.499, - 245.412, - 243.846, - 241.358, - 238.057, - 180.32, - 182.821, - 156.014, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 58.323, - 59.545, - 95.535, - 149.211, - 197.84, - 207.325, - 223.086, - 233.399, - 244.14, - 246.909, - 244.843, - 238.973, - 153.185, - 120.233, - 117.733, - 80.535, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.5, - 60.112, - 60.633, - 114.136, - 115.699, - 170.564, - 181.378, - 183.243, - 183.002, - 183.427, - 139.301, - 91.083, - 28.45, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.496, - 60.089, - 60.629, - 114.185, - 114.467, - 154.806, - 160.92, - 161.624, - 161.557, - 161.431, - 124.339, - 78.866, - 28.45, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.262, - 130.944, - 197.407, - 197.816, - 199.573, - 207.856, - 221.824, - 228.15, - 227.212, - 225.798, - 223.927, - 169.977, - 177.752, - 153.747, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.254, - 130.926, - 197.391, - 201.709, - 218.706, - 226.606, - 235.56, - 241.286, - 243.194, - 241.061, - 238.121, - 179.805, - 188.146, - 167.827, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.254, - 130.923, - 201.605, - 217.962, - 238.561, - 248.078, - 251.822, - 257.483, - 255.759, - 251.085, - 245.174, - 188.127, - 197.271, - 177.629, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.258, - 132.063, - 225.23, - 242.825, - 252.484, - 256.965, - 262.727, - 266.225, - 265.385, - 259.518, - 253.725, - 196.994, - 206.927, - 182.184, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 58.323, - 59.551, - 95.623, - 172.759, - 246.739, - 259.151, - 264.686, - 268.197, - 268.369, - 264.689, - 259.582, - 253.684, - 171.204, - 144.942, - 140.346, - 98.048, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.513, - 60.381, - 71.164, - 147.046, - 163.426, - 208.863, - 211.688, - 214.132, - 211.13, - 203.28, - 155.112, - 102.718, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.266, - 131.011, - 208.514, - 235.69, - 252.392, - 254.968, - 255.411, - 255.769, - 255.818, - 253.281, - 245.641, - 183.595, - 195.399, - 173.321, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.257, - 130.966, - 197.978, - 210.32, - 226.933, - 239.627, - 246.849, - 247.426, - 246.7, - 245.408, - 241.274, - 183.1, - 194.855, - 170.567, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.256, - 130.947, - 197.754, - 209.194, - 222.537, - 229.391, - 237.771, - 243.308, - 244.867, - 241.307, - 235.956, - 178.976, - 190.137, - 165.915, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.258, - 130.93, - 197.407, - 197.839, - 216.099, - 238.694, - 244.314, - 243.713, - 242.351, - 238.744, - 231.692, - 172.157, - 184.899, - 163.563, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.554, - 77.266, - 130.905, - 197.37, - 202.269, - 212.093, - 214.152, - 214.678, - 218.948, - 224.05, - 224.132, - 222.694, - 174.798, - 185.488, - 163.359, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 61.75, - 59.562, - 95.578, - 149.342, - 198.039, - 203.209, - 207.169, - 210.153, - 212.271, - 213.334, - 213.433, - 212.25, - 147.556, - 121.546, - 116.464, - 80.045, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.517, - 60.18, - 60.81, - 114.614, - 122.017, - 173.897, - 183.904, - 187.133, - 186.078, - 184.157, - 135.012, - 88.123, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.274, - 131.02, - 197.57, - 198.764, - 205.055, - 208.922, - 210.997, - 212.054, - 212.204, - 211.488, - 210.193, - 163.835, - 176.411, - 152.162, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.268, - 130.991, - 197.502, - 197.927, - 198.199, - 200.501, - 210.895, - 215.167, - 215.509, - 215.156, - 213.617, - 166.941, - 180.033, - 153.998, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.264, - 130.949, - 197.467, - 197.927, - 198.247, - 198.407, - 198.42, - 198.273, - 199.139, - 202.674, - 204.068, - 158.111, - 169.819, - 151.179, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.026, - 77.269, - 130.998, - 197.533, - 197.972, - 200.039, - 208.024, - 215.802, - 218.948, - 218.512, - 217.644, - 216.359, - 167.249, - 176.769, - 152.636, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.025, - 77.265, - 130.966, - 197.471, - 197.916, - 205.56, - 219.511, - 224.643, - 226.306, - 227.186, - 226.646, - 224.426, - 177.087, - 184.169, - 160.818, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 61.75, - 59.549, - 95.49, - 151.786, - 216.507, - 229.683, - 241.795, - 250.425, - 253.789, - 254.249, - 253.972, - 249.847, - 171.84, - 138.143, - 133.964, - 88.935, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.512, - 60.152, - 67.992, - 144.878, - 163.804, - 209.975, - 213.058, - 220.949, - 220.802, - 215.338, - 175.318, - 121.368, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.269, - 144.642, - 243.003, - 267.773, - 294.534, - 297.698, - 293.43, - 290.917, - 287.653, - 278.505, - 264.855, - 205.654, - 208.069, - 185.641, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.266, - 140.653, - 238.004, - 251.169, - 263.21, - 277.911, - 285.471, - 282.358, - 283.258, - 278.228, - 264.81, - 205.987, - 209.182, - 186.043, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.256, - 130.937, - 197.428, - 199.875, - 216.534, - 222.937, - 228.996, - 232.282, - 231.653, - 230.965, - 226.831, - 175.805, - 181.45, - 155.446, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.265, - 130.965, - 197.468, - 200.706, - 217.831, - 224.184, - 226.714, - 227.543, - 226.791, - 224.636, - 221.274, - 173.238, - 178.093, - 154.003, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 62.98, - 77.227, - 130.874, - 197.223, - 197.903, - 204.956, - 219.578, - 225.196, - 224.557, - 222.925, - 222.342, - 219.284, - 174.325, - 179.378, - 154.294, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 61.75, - 59.538, - 95.494, - 149.183, - 197.815, - 197.947, - 198.956, - 208.215, - 214.611, - 215.345, - 214.986, - 213.707, - 150.55, - 116.098, - 115.358, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.494, - 60.071, - 60.637, - 114.024, - 114.325, - 149.681, - 149.009, - 149.284, - 148.725, - 148.77, - 112.64, - 87.355, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.636, - 77.393, - 130.914, - 197.381, - 198.217, - 213.25, - 228.913, - 240.052, - 242.976, - 239.456, - 232.966, - 224.425, - 175.316, - 176.551, - 154.233, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 77.181, - 130.847, - 197.392, - 197.821, - 198.108, - 199.283, - 201.637, - 201.45, - 201.113, - 200.591, - 199.811, - 159.809, - 169.604, - 151.465, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.577, - 77.298, - 130.917, - 197.424, - 198.565, - 205.713, - 212.636, - 215.34, - 215.09, - 214.418, - 213.368, - 211.852, - 171.202, - 173.369, - 153.622, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.452, - 77.245, - 130.933, - 197.603, - 201.922, - 209.47, - 219.041, - 228.384, - 230.437, - 230.279, - 229.424, - 226.65, - 180.121, - 185.293, - 162.607, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 77.228, - 130.371, - 196.868, - 211.213, - 237.714, - 251.316, - 257.656, - 257.594, - 258.046, - 251.211, - 240.727, - 192.361, - 192.849, - 166.779, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 65.176, - 59.548, - 95.562, - 149.329, - 198.168, - 208.12, - 221.606, - 224.14, - 226.055, - 225.85, - 224.922, - 222.812, - 157.365, - 118.957, - 117.713, - 80.604, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.502, - 60.122, - 60.741, - 114.55, - 117.715, - 161.361, - 170.55, - 174.017, - 173.439, - 171.15, - 118.461, - 92.591, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.495, - 60.097, - 60.699, - 114.95, - 130.391, - 176.531, - 173.724, - 172.769, - 169.392, - 163.858, - 114.992, - 90.858, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 77.251, - 130.949, - 197.467, - 201.804, - 212.97, - 213.457, - 214.171, - 214.628, - 214.443, - 213.432, - 211.637, - 172.194, - 172.33, - 153.998, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 77.243, - 130.926, - 197.429, - 197.878, - 206.914, - 222.268, - 223.129, - 222.561, - 221.286, - 220.003, - 216.218, - 173.245, - 171.656, - 152.64, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 77.239, - 130.92, - 197.442, - 198.12, - 202.908, - 210.846, - 215.324, - 216.736, - 216.514, - 215.192, - 213.121, - 175.4, - 173.341, - 154.116, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.407, - 77.242, - 130.926, - 197.443, - 197.935, - 198.831, - 200.302, - 201.543, - 202.674, - 202.823, - 202.11, - 201.304, - 164.875, - 171.12, - 152.377, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 68.602, - 59.527, - 95.496, - 149.213, - 197.863, - 198.114, - 198.206, - 200.793, - 209.132, - 209.736, - 208.814, - 207.41, - 148.697, - 115.496, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.477, - 60.045, - 60.592, - 113.909, - 114.208, - 149.94, - 149.692, - 149.414, - 149.498, - 148.879, - 112.921, - 94.208, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.951, - 77.279, - 130.84, - 197.328, - 197.773, - 198.044, - 199.414, - 201.297, - 204.194, - 205.265, - 204.556, - 203.493, - 168.085, - 170.085, - 151.897, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.124, - 77.272, - 130.885, - 197.381, - 198.048, - 202.087, - 208.612, - 213.188, - 216.071, - 217.008, - 215.954, - 213.778, - 175.664, - 172.564, - 154.01, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.833, - 77.224, - 130.906, - 197.421, - 199.947, - 203.293, - 203.524, - 212.696, - 222.524, - 222.039, - 218.496, - 212.574, - 170.933, - 171.946, - 153.328, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.833, - 77.224, - 130.914, - 201.98, - 217.966, - 217.785, - 218.349, - 218.421, - 218.545, - 218.3, - 216.721, - 215.543, - 178.777, - 173.309, - 154.675, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.833, - 77.211, - 131.202, - 213.225, - 231.365, - 254.341, - 254.743, - 251.835, - 251.233, - 251.691, - 240.483, - 223.651, - 180.041, - 173.903, - 155.364, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 68.602, - 59.485, - 95.464, - 149.185, - 197.851, - 198.122, - 198.237, - 198.24, - 210.463, - 218.048, - 216.316, - 212.897, - 149.481, - 115.382, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.43, - 60.059, - 60.606, - 114.187, - 114.44, - 149.967, - 149.922, - 149.755, - 149.447, - 148.965, - 112.84, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.963, - 77.349, - 130.924, - 197.401, - 197.854, - 198.142, - 198.27, - 199.271, - 213.44, - 218.518, - 216.94, - 212.928, - 172.891, - 168.588, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.01, - 77.269, - 130.879, - 197.398, - 197.841, - 198.117, - 199.224, - 202.204, - 208.241, - 210.887, - 209.78, - 208.262, - 172.22, - 170.275, - 152.008, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.007, - 77.231, - 130.825, - 197.321, - 197.769, - 199.393, - 205.312, - 210.237, - 209.451, - 208.319, - 207.884, - 206.682, - 171.518, - 169.838, - 151.854, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.971, - 80.624, - 130.822, - 197.321, - 197.789, - 198.084, - 198.259, - 199.103, - 199.589, - 199.18, - 198.595, - 197.891, - 169.914, - 169.806, - 151.616, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.385, - 80.892, - 130.836, - 197.374, - 197.868, - 200.506, - 205.182, - 205.881, - 205.62, - 205.271, - 204.501, - 202.959, - 171.497, - 170.531, - 151.882, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.127, - 63.281, - 95.491, - 149.242, - 197.937, - 198.234, - 199.502, - 201.323, - 201.764, - 201.297, - 200.599, - 199.634, - 152.707, - 115.704, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.819, - 60.113, - 60.659, - 114.276, - 115.288, - 157.933, - 163.571, - 163.857, - 159.382, - 155.135, - 115.0, - 97.638, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.311, - 80.872, - 130.876, - 197.405, - 199.083, - 213.75, - 230.915, - 239.962, - 245.691, - 249.337, - 241.23, - 228.821, - 187.854, - 181.884, - 158.514, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.889, - 80.576, - 130.865, - 197.473, - 204.332, - 223.253, - 236.665, - 246.378, - 244.135, - 235.745, - 224.943, - 216.265, - 181.486, - 173.903, - 153.024, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.899, - 80.582, - 130.851, - 197.616, - 210.429, - 222.862, - 222.538, - 222.203, - 222.154, - 221.738, - 220.961, - 219.61, - 176.705, - 171.378, - 152.881, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 69.929, - 80.598, - 130.837, - 197.364, - 197.86, - 197.945, - 199.367, - 200.791, - 201.61, - 200.769, - 200.397, - 202.835, - 170.482, - 169.389, - 150.876, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.588, - 81.034, - 130.845, - 197.344, - 197.819, - 198.24, - 199.848, - 201.431, - 201.729, - 201.365, - 200.659, - 203.167, - 171.222, - 169.922, - 151.357, - 60.908, - 33.107, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.102, - 63.221, - 95.48, - 149.204, - 197.917, - 198.234, - 198.366, - 198.322, - 198.12, - 197.745, - 197.188, - 199.821, - 150.775, - 115.348, - 115.348, - 79.944, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.778, - 60.517, - 60.686, - 114.214, - 114.52, - 150.074, - 150.035, - 149.837, - 149.482, - 148.915, - 116.143, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 57.123, - 77.793, - 131.398, - 197.8, - 198.104, - 198.3, - 199.77, - 201.016, - 200.791, - 200.154, - 202.582, - 219.223, - 169.857, - 169.179, - 150.796, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.887, - 77.898, - 131.381, - 197.769, - 198.055, - 204.042, - 213.843, - 214.449, - 213.868, - 211.936, - 205.636, - 219.514, - 169.83, - 169.361, - 151.025, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.545, - 77.727, - 131.363, - 197.734, - 198.746, - 206.332, - 212.402, - 212.439, - 211.684, - 210.481, - 211.053, - 220.906, - 170.663, - 169.767, - 151.694, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.68, - 77.672, - 131.388, - 204.12, - 220.224, - 229.849, - 237.244, - 235.648, - 229.469, - 222.486, - 220.988, - 232.774, - 174.978, - 171.446, - 152.94, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.263, - 77.631, - 131.332, - 198.982, - 213.181, - 227.352, - 232.354, - 233.889, - 231.418, - 227.846, - 223.348, - 230.926, - 173.203, - 172.218, - 153.733, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 54.955, - 59.928, - 95.937, - 150.573, - 215.369, - 225.289, - 226.06, - 227.189, - 231.245, - 230.575, - 223.85, - 232.247, - 154.424, - 118.032, - 117.506, - 80.336, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 18.171, - 11.79, - 60.403, - 60.894, - 114.377, - 114.51, - 149.908, - 149.185, - 149.796, - 149.32, - 155.334, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.589, - 77.655, - 130.911, - 197.68, - 198.012, - 198.153, - 198.132, - 197.956, - 197.612, - 197.063, - 203.153, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.765, - 77.372, - 130.922, - 197.688, - 198.04, - 200.43, - 207.798, - 211.896, - 211.359, - 210.445, - 208.936, - 219.624, - 170.533, - 169.439, - 150.941, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 56.956, - 77.3, - 131.288, - 197.162, - 198.03, - 198.18, - 198.166, - 198.152, - 197.926, - 197.344, - 203.309, - 216.952, - 168.553, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 58.108, - 79.175, - 132.69, - 198.564, - 198.401, - 198.625, - 198.414, - 197.956, - 197.787, - 197.19, - 203.376, - 217.18, - 168.997, - 168.978, - 151.285, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 61.214, - 78.387, - 131.423, - 197.856, - 198.186, - 198.321, - 198.279, - 198.084, - 197.715, - 197.118, - 203.145, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 59.146, - 60.089, - 95.92, - 149.549, - 198.093, - 198.253, - 198.805, - 198.863, - 198.489, - 197.726, - 203.797, - 217.405, - 151.021, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.551, - 60.224, - 60.959, - 113.983, - 114.199, - 148.955, - 148.681, - 148.252, - 148.671, - 154.805, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.25, - 78.048, - 130.992, - 197.657, - 197.457, - 197.552, - 196.676, - 198.252, - 198.253, - 197.644, - 203.669, - 217.258, - 168.778, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.08, - 77.593, - 131.277, - 200.309, - 219.064, - 233.036, - 241.627, - 244.074, - 238.942, - 231.655, - 227.37, - 233.055, - 175.466, - 172.643, - 154.018, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 59.575, - 77.545, - 131.278, - 199.714, - 203.693, - 212.801, - 217.463, - 218.882, - 218.853, - 218.094, - 221.156, - 223.676, - 172.458, - 171.222, - 152.156, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.513, - 60.079, - 60.415, - 114.311, - 114.468, - 149.875, - 149.698, - 149.344, - 148.506, - 154.805, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.472, - 78.194, - 131.578, - 197.749, - 198.093, - 198.26, - 198.868, - 199.308, - 198.855, - 198.105, - 203.858, - 216.75, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 58.961, - 59.967, - 96.117, - 149.501, - 198.03, - 198.186, - 198.17, - 197.993, - 197.639, - 197.069, - 203.107, - 216.707, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 21.597, - 11.51, - 60.429, - 60.888, - 114.32, - 114.48, - 149.896, - 149.717, - 149.355, - 148.813, - 154.883, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 60.177, - 77.339, - 131.261, - 197.711, - 200.295, - 208.475, - 218.525, - 222.481, - 223.58, - 222.308, - 222.91, - 229.509, - 173.341, - 171.073, - 151.715, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.859, - 77.608, - 130.845, - 197.197, - 197.634, - 198.168, - 198.957, - 199.249, - 198.872, - 198.388, - 204.354, - 217.569, - 168.598, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.403, - 77.647, - 130.87, - 197.602, - 197.946, - 199.456, - 202.352, - 202.917, - 202.394, - 201.629, - 207.024, - 219.182, - 169.432, - 168.57, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.31, - 77.996, - 131.214, - 197.629, - 198.097, - 200.602, - 201.463, - 201.195, - 200.765, - 199.667, - 205.814, - 217.926, - 168.863, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.044, - 77.566, - 130.611, - 196.76, - 196.183, - 196.346, - 196.222, - 196.241, - 196.41, - 196.319, - 203.086, - 216.707, - 168.489, - 168.489, - 150.799, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 63.269, - 60.801, - 96.51, - 149.351, - 197.587, - 197.542, - 197.661, - 197.218, - 196.573, - 196.207, - 203.002, - 216.707, - 150.787, - 115.523, - 115.624, - 80.35, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 25.024, - 11.425, - 61.463, - 61.032, - 114.113, - 114.809, - 150.102, - 150.316, - 149.996, - 149.806, - 155.921, - 133.933, - 98.635, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 65.086, - 78.799, - 131.08, - 197.712, - 197.114, - 197.357, - 197.491, - 196.775, - 196.164, - 197.023, - 203.015, - 216.707, - 168.489, - 168.489, - 150.798, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.307, - 77.984, - 131.235, - 197.686, - 198.572, - 205.002, - 209.113, - 203.747, - 202.237, - 200.461, - 207.976, - 217.122, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.609, - 77.512, - 131.19, - 197.609, - 197.941, - 198.392, - 198.393, - 198.604, - 197.773, - 197.397, - 207.05, - 217.225, - 168.988, - 168.64, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 63.636, - 77.637, - 131.191, - 197.629, - 197.967, - 198.138, - 198.123, - 197.388, - 197.581, - 197.022, - 206.507, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 64.106, - 77.888, - 131.223, - 197.654, - 198.036, - 199.106, - 199.704, - 199.513, - 199.127, - 198.563, - 207.975, - 217.903, - 169.328, - 168.531, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.204, - 60.355, - 95.898, - 149.449, - 197.865, - 197.925, - 198.153, - 197.631, - 197.612, - 197.06, - 206.518, - 216.707, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.615, - 60.507, - 60.82, - 114.317, - 114.511, - 149.957, - 148.597, - 148.382, - 148.819, - 158.288, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.347, - 33.392, - 33.37, - 68.291, - 78.65, - 131.679, - 197.302, - 197.172, - 198.13, - 196.227, - 196.746, - 196.368, - 196.572, - 203.057, - 216.707, - 168.501, - 168.921, - 151.62, - 60.908, - 33.107, - 33.107, - 33.107, - 33.25, - 33.265, - 33.803, - 34.096, - 34.422, - 68.957, - 78.938, - 131.615, - 197.645, - 198.011, - 198.204, - 198.198, - 198.01, - 197.639, - 197.074, - 203.096, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.314, - 33.582, - 34.004, - 34.072, - 34.376, - 68.876, - 78.617, - 131.335, - 197.643, - 198.01, - 198.189, - 198.177, - 198.001, - 197.634, - 197.072, - 203.104, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.402, - 33.526, - 33.539, - 33.8, - 34.142, - 68.678, - 78.238, - 130.73, - 197.58, - 197.91, - 198.052, - 198.063, - 197.912, - 197.577, - 197.037, - 203.095, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.216, - 33.336, - 68.178, - 77.987, - 130.753, - 197.589, - 197.462, - 197.54, - 197.647, - 196.568, - 197.399, - 197.244, - 203.172, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.533, - 60.323, - 95.77, - 149.418, - 198.019, - 198.72, - 199.832, - 199.585, - 199.146, - 198.565, - 204.514, - 217.299, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 28.45, - 11.58, - 60.314, - 60.825, - 115.615, - 119.63, - 161.444, - 158.399, - 158.925, - 160.905, - 160.103, - 134.408, - 98.117, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.493, - 77.562, - 130.423, - 197.557, - 203.204, - 221.818, - 232.741, - 235.071, - 224.913, - 217.481, - 216.388, - 220.746, - 171.488, - 170.531, - 152.061, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 67.138, - 77.398, - 131.158, - 198.648, - 212.192, - 231.565, - 234.973, - 232.187, - 226.78, - 222.678, - 222.627, - 229.639, - 175.028, - 173.267, - 154.606, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.557, - 77.307, - 131.128, - 198.91, - 213.007, - 230.283, - 242.293, - 242.117, - 234.115, - 228.21, - 220.548, - 221.588, - 171.722, - 170.467, - 151.877, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.762, - 77.176, - 130.686, - 198.575, - 211.442, - 228.851, - 227.142, - 223.328, - 222.471, - 218.449, - 214.226, - 220.959, - 171.645, - 170.803, - 152.122, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 66.962, - 77.375, - 131.077, - 198.039, - 203.216, - 208.137, - 208.382, - 208.203, - 207.835, - 207.531, - 209.955, - 219.978, - 170.186, - 169.241, - 150.879, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 66.192, - 60.096, - 95.695, - 149.324, - 198.238, - 199.4, - 199.575, - 199.224, - 199.436, - 198.422, - 204.64, - 217.67, - 150.775, - 115.348, - 115.348, - 79.921, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.519, - 60.64, - 60.753, - 114.256, - 115.979, - 152.429, - 150.657, - 149.401, - 148.853, - 154.822, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.776, - 78.444, - 131.391, - 197.623, - 198.671, - 211.872, - 227.876, - 219.066, - 210.202, - 205.282, - 205.37, - 217.83, - 169.216, - 168.544, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.534, - 60.62, - 60.819, - 115.553, - 119.794, - 168.346, - 174.477, - 170.564, - 162.056, - 158.753, - 133.08, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.91, - 78.039, - 131.42, - 197.534, - 197.506, - 197.648, - 197.559, - 197.333, - 197.048, - 196.578, - 203.021, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.064, - 77.977, - 130.603, - 196.588, - 197.026, - 197.505, - 197.731, - 197.253, - 196.75, - 197.09, - 203.054, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 71.135, - 77.828, - 130.871, - 197.166, - 197.033, - 196.589, - 196.558, - 196.268, - 196.429, - 196.397, - 203.012, - 216.707, - 168.489, - 168.489, - 150.775, - 60.908, - 33.107, - 33.107, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 69.848, - 60.18, - 95.111, - 148.371, - 196.38, - 196.494, - 196.284, - 196.956, - 199.485, - 196.874, - 203.157, - 216.707, - 150.775, - 115.348, - 115.415, - 80.182, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.478, - 60.392, - 60.204, - 112.649, - 112.928, - 148.363, - 148.299, - 148.192, - 148.179, - 154.798, - 133.062, - 97.634, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 33.107, - 70.664, - 77.744, - 131.267, - 197.486, - 197.891, - 198.097, - 197.622, - 197.438, - 197.666, - 196.851, - 203.256, - 216.707, - 168.489, - 168.489, - 150.791, - 60.908, - 33.107, - 33.107 - ], - "lifecycle_emissions_tonnes_SO2_bau": 0.69, - "distance_to_emissions_region_meters": 0.0, - "annual_emissions_tonnes_NOx_bau": 0.14, - "annual_emissions_tonnes_CO2": 452.67, - "lifecycle_emissions_tonnes_CO2": 9741.48 - }, - "ElectricTariff": { - "lifecycle_demand_cost_after_tax_bau": 0.0, - "year_one_energy_cost_before_tax": 232771.01, - "lifecycle_fixed_cost_after_tax_bau": 0.0, - "year_one_min_charge_adder_before_tax": 0.0, - "lifecycle_export_benefit_after_tax_bau": -0.0, - "year_one_export_benefit_before_tax_bau": -0.0, - "lifecycle_demand_cost_after_tax": 0.0, - "lifecycle_export_benefit_after_tax": -0.0, - "year_one_demand_cost_before_tax_bau": 0.0, - "year_one_bill_before_tax_bau": 263196.09, - "lifecycle_energy_cost_after_tax_bau": 2.521988e6, - "lifecycle_min_charge_adder_after_tax_bau": 0.0, - "year_one_export_benefit_before_tax": -0.0, - "year_one_bill_before_tax": 232771.01, - "year_one_energy_cost_before_tax_bau": 263196.09, - "lifecycle_min_charge_adder_after_tax": 0.0, - "year_one_fixed_cost_before_tax": 0.0, - "lifecycle_coincident_peak_cost_after_tax": 0.0, - "year_one_demand_cost_before_tax": 0.0, - "lifecycle_fixed_cost_after_tax": 0.0, - "year_one_min_charge_adder_before_tax_bau": 0.0, - "year_one_coincident_peak_cost_before_tax_bau": 0.0, - "lifecycle_coincident_peak_cost_after_tax_bau": 0.0, - "lifecycle_energy_cost_after_tax": 2.23044995e6, - "year_one_coincident_peak_cost_before_tax": 0.0, - "year_one_fixed_cost_before_tax_bau": 0.0 - }, - "ElectricLoad": { - "load_series_kw": [ - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 32.1651558934, - 32.3881481528, - 32.7585418392, - 32.7247305327, - 13.187118239999998, - 81.151758507, - 92.248455282, - 153.443729561, - 157.963779561, - 193.83406871600002, - 190.506058716, - 183.106588716, - 171.551398716, - 157.05634656499998, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.8692608705, - 79.82287324699999, - 151.039085081, - 228.93602942799998, - 237.60373942799998, - 242.19172942799997, - 242.68439942799998, - 239.100019428, - 231.74531942799996, - 220.18502942799998, - 200.12341727700002, - 216.706946524, - 168.489065812, - 168.491911227, - 150.85171541, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.5474906692, - 79.79461025209999, - 141.36722718500002, - 229.54102411399998, - 238.40158277999998, - 243.459429428, - 244.03129942799998, - 240.75477942799998, - 233.17080942799998, - 221.338889428, - 205.78216727699999, - 216.706946524, - 168.517535318, - 168.721294419, - 151.09283434, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.6578533614, - 82.6777677224, - 151.60253116099997, - 229.264201979, - 238.112529428, - 242.646679428, - 243.10337942799998, - 239.78250942799997, - 232.35680942799996, - 220.85979942799997, - 205.688857277, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.4065050174, - 79.7758119707, - 151.40434154800002, - 229.270262643, - 237.79167311700002, - 242.19677833699998, - 242.63919742299998, - 231.63693430900003, - 220.750282684, - 220.89401858699998, - 203.088540453, - 217.360114968, - 169.264710745, - 169.393233922, - 151.75045889499998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 32.1323934869, - 32.880291975, - 32.8406835913, - 33.0638860086, - 71.1972270942, - 63.3542473172, - 115.80719452760002, - 179.372813475, - 224.45584942799996, - 224.581299428, - 231.36673942799996, - 238.07133942799996, - 231.18284942799997, - 220.26121942799998, - 205.939507277, - 216.706946524, - 150.775396235, - 115.34805707999999, - 115.36839556599999, - 80.2129371411, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 32.0314953702, - 32.061228484, - 32.1144179076, - 15.426403582, - 79.2113773219, - 90.07297082819998, - 151.815039561, - 156.560749561, - 192.771618716, - 189.934658716, - 182.898048716, - 171.780908716, - 157.86883656499998, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.586747502, - 82.5594247341, - 151.247963297, - 229.15358036799998, - 238.489599428, - 243.68198942799998, - 244.33314942799998, - 241.04647942799997, - 233.835759428, - 222.03845942799998, - 207.128467277, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.6172383343, - 79.4995193924, - 140.94779766099998, - 228.51640942799997, - 237.183269428, - 241.96628942799998, - 242.573489428, - 239.56897942799998, - 232.539419428, - 221.43295942799998, - 207.462187277, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.2988329368, - 79.86647197070002, - 150.05594307, - 227.92643942799995, - 230.785116099, - 229.992247968, - 236.747132685, - 225.34751629000002, - 223.952084999, - 212.87249816599999, - 203.04225295499998, - 216.75762088200003, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.1700965213, - 78.33514593059999, - 132.625735884, - 206.947999428, - 233.958299428, - 239.38561942799998, - 231.21488942799996, - 228.838809428, - 231.29383942799998, - 218.24718942799996, - 207.449887277, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.1449318269, - 81.71146280149999, - 149.41344020499997, - 227.56080942799997, - 236.51507942799998, - 241.46187942799997, - 242.14780942799996, - 238.959949428, - 232.08402942799995, - 221.236379428, - 208.140777277, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 69.8722327627, - 64.0991499322, - 114.12216757780001, - 179.12612871599998, - 235.71580942799997, - 241.344593234, - 245.077261312, - 246.300942938, - 242.186443021, - 227.497139228, - 208.05982809500003, - 217.960109224, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.7231487988, - 79.39233082819999, - 91.7047708282, - 153.814204269, - 154.642399957, - 186.62131664700001, - 183.470797012, - 183.57551991099996, - 172.534841767, - 159.52798352, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 13.5048587988, - 78.8007896061, - 89.47430930510001, - 141.658129561, - 147.864089561, - 170.10885871600001, - 189.769588716, - 162.73169871599998, - 149.86232871599998, - 149.232128716, - 133.061726657, - 97.6558853336, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 72.0552251792, - 82.37925082000001, - 148.878730501, - 226.84919942799996, - 236.016029428, - 241.20935942799997, - 242.20373942799998, - 239.473929428, - 232.780339428, - 221.66914942799997, - 205.54711942799997, - 216.706946524, - 168.489065812, - 168.489065812, - 150.784832476, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 72.1128977055, - 82.84117310530002, - 149.898008795, - 227.26379923, - 235.86537147800001, - 240.45149146, - 232.084659753, - 238.904744239, - 232.657448727, - 221.97313850600003, - 206.47035506499998, - 217.647917183, - 169.580816349, - 169.609419563, - 151.81423075200001, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.1484538693, - 33.1579791685, - 33.2161229216, - 72.404215929, - 81.89106904100001, - 144.968198032, - 214.93911942799997, - 227.99220942799997, - 232.14282942799997, - 231.76812942799998, - 220.294669428, - 218.53370942799998, - 206.66354942799998, - 197.51118942799997, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.3500988695, - 81.4242603793, - 133.21505361899997, - 207.84839942799996, - 215.425669428, - 214.406059428, - 241.425229428, - 238.94396942799997, - 217.65826942799998, - 213.458539428, - 197.499259428, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.9421555958, - 32.2035600905, - 32.2652049286, - 32.304003877599996, - 70.6306158834, - 64.87676612749999, - 114.03062435300001, - 179.501768716, - 236.64990942799997, - 241.90437942799997, - 215.79464942799999, - 200.180069428, - 201.95299942799997, - 196.726449428, - 196.99228942799996, - 216.706946524, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9691018546, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 32.1861644729, - 32.411915279999995, - 32.5718722321, - 32.830846147500004, - 13.754587628, - 69.7588359042, - 83.6192306699, - 145.124929561, - 147.864319561, - 184.970898716, - 176.772428716, - 170.21452871600002, - 169.223618716, - 158.922938716, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.244252711899996, - 33.107087900699995, - 71.7314978994, - 83.1691202537, - 150.1085794, - 227.62277942799997, - 236.28825942799998, - 241.57398942799998, - 242.735829428, - 239.95657942799997, - 233.50968942799997, - 223.06277942799997, - 207.18229942799996, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.2520486233, - 33.273657609000004, - 71.6231581158, - 82.7872733037, - 149.248053491, - 227.05994942799998, - 224.30588942799997, - 231.995510973, - 228.831475361, - 226.802187514, - 224.59631162699998, - 214.36362933, - 199.82497822599998, - 216.721073515, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.5362609355, - 78.915522855, - 139.14246913800002, - 207.34600942799997, - 215.213991826, - 218.39926344399998, - 219.18910861499998, - 225.540647516, - 223.11099023, - 217.433802111, - 206.050193761, - 216.413796675, - 170.606738842, - 170.494808514, - 152.783232233, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.0071306369, - 77.276646023, - 133.93780913800003, - 206.24377942799998, - 205.03769146699997, - 223.703108794, - 224.59824541900002, - 276.871649931, - 274.607642999, - 264.336763137, - 240.779303793, - 235.345027798, - 180.246863585, - 171.697026845, - 152.828674428, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.5248898027, - 81.6845756164, - 142.593269138, - 220.89192578799998, - 205.68775353300003, - 253.08898435600003, - 266.204581622, - 269.723578975, - 241.22410524, - 254.099784196, - 222.27934595999997, - 224.624227846, - 179.8832421, - 173.852535803, - 153.12654982, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 65.3926614137, - 64.9881444643, - 116.0537999831, - 183.077928716, - 241.44372942799998, - 255.20724061500002, - 274.81598691199997, - 274.975416228, - 263.23591507, - 242.967350689, - 215.448399118, - 215.368693224, - 151.00139183000002, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 17.673008798799998, - 81.18176410790001, - 94.16852082819999, - 156.805279498, - 164.133291661, - 201.64446886299996, - 199.02981642599997, - 192.153644078, - 180.21125928899997, - 162.765761205, - 129.635408808, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.5450257743, - 84.07233372830001, - 151.603715737, - 229.98281942799997, - 238.70235942799997, - 243.247109428, - 243.96460942799996, - 231.10899942799998, - 229.383629428, - 212.96359942799998, - 200.892399428, - 213.280628675, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 68.0150536493, - 80.53778989349999, - 150.96233383799998, - 228.96000942799998, - 230.760729428, - 234.667959428, - 234.876149428, - 231.311319428, - 226.234219428, - 217.501159428, - 202.94353942799998, - 213.280628675, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 68.1338724794, - 78.1798964587, - 132.53842153300002, - 212.16973378800003, - 222.33268942799998, - 245.23601942799996, - 246.463559428, - 243.96038942799998, - 237.194099428, - 226.241759428, - 207.82571942799999, - 213.280628675, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.5896753091, - 83.0463000934, - 149.68708138600002, - 227.847821735, - 236.52967942799998, - 241.405269428, - 243.00549942799998, - 240.95606942799998, - 235.22054942799997, - 224.86821942799997, - 208.82103942799998, - 213.280628675, - 168.489065812, - 168.489065812, - 150.82903128, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.7296707432, - 84.83498913039999, - 152.64156998500002, - 231.286721442, - 233.080839125, - 236.17564942799999, - 234.604379428, - 243.07203942799998, - 236.44632942799996, - 226.253879428, - 211.12674942799998, - 213.280628675, - 168.603925621, - 168.804078193, - 151.24034772800002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 32.006453887300005, - 67.6467927111, - 68.1944595417, - 117.1023633386, - 182.52555871599998, - 239.68242942799998, - 244.549899428, - 245.44226942799997, - 242.63131942799998, - 236.40314942799998, - 226.281789428, - 211.346439428, - 209.854310826, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.949074679299997, - 28.6677997673, - 18.6003929116, - 81.2893867719, - 93.0342763918, - 155.299429561, - 160.137389561, - 196.58083871600002, - 193.77073871599998, - 187.51920871599998, - 177.482368716, - 162.685608716, - 126.20909095800002, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 68.12779095740001, - 80.2620992761, - 142.42567853699998, - 217.372769428, - 229.90069942799997, - 233.89217942799996, - 231.617369428, - 226.43803942799997, - 225.46987942799998, - 214.123639428, - 202.017309428, - 209.854310826, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.7074061905, - 85.2441270473, - 151.448460253, - 228.643529428, - 237.69240942799996, - 242.87271942799995, - 244.368709428, - 234.92801942799997, - 228.62384942799997, - 220.361359428, - 205.992329428, - 209.854310826, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.92357773559999, - 82.4167213288, - 146.308654491, - 221.363259428, - 228.521559428, - 236.25549942799998, - 229.02654942799998, - 227.27037942799998, - 220.75058942799998, - 218.38013942799998, - 204.98196942799999, - 209.854310826, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.0195564568, - 81.7867835364, - 141.438701432, - 217.760704597, - 219.434899428, - 215.88586942799998, - 229.248449428, - 231.44786942799996, - 217.578059428, - 214.65946942799997, - 201.787599428, - 209.854310826, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.81245927900001, - 85.18322551339999, - 145.76062677499996, - 221.008839428, - 224.135639428, - 231.971729428, - 206.930759428, - 209.04693623400004, - 206.72525418, - 206.355254654, - 199.78652478299998, - 211.430508402, - 168.631881565, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 62.81905509520001, - 61.2624877597, - 105.23604998310002, - 153.788437728, - 217.200462163, - 247.528529284, - 245.00976819699997, - 248.05588464800002, - 242.97130553999997, - 236.803931562, - 215.81005935299996, - 218.694119197, - 153.011108362, - 116.124006159, - 115.542145234, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 11.3183987988, - 80.36962499970001, - 93.37841082819999, - 156.14596652999998, - 162.56821625700002, - 200.95179534300001, - 200.35616200200002, - 196.826629814, - 187.25696932499997, - 169.847331775, - 128.387966216, - 97.68391383459999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.4402921551, - 84.4116833563, - 151.01584913800002, - 225.353145893, - 260.224575856, - 277.410574156, - 288.867655975, - 295.160866498, - 282.912908403, - 266.265610333, - 226.729710159, - 224.907089411, - 172.00815785700001, - 170.841763735, - 152.421036138, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.3886767617, - 85.0703577293, - 152.25808913800003, - 232.06728081199998, - 229.857522727, - 277.21953144500003, - 276.286114656, - 269.88296576, - 263.584016227, - 244.95642575899998, - 232.53468593600002, - 215.65498269600002, - 171.59169243, - 170.476878971, - 151.899687987, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.5366435952, - 85.73380296379999, - 153.07314913800002, - 232.12146942799995, - 241.77749942799997, - 246.669359428, - 248.284772627, - 246.97845569400002, - 240.373997368, - 229.901889403, - 214.46608340199998, - 207.114032444, - 168.634719254, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.5575164019, - 81.1626185894, - 153.53443538700003, - 231.73240942799998, - 240.39310942799997, - 245.209889428, - 246.26693942799997, - 243.45749942799998, - 237.14703942799997, - 227.141839428, - 212.78095942799996, - 206.427992976, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.1606403238, - 86.4908288498, - 152.967567646, - 231.05687607200002, - 239.930439428, - 244.980257117, - 246.419868271, - 243.98226077799998, - 237.582760288, - 227.56581174000002, - 212.905455917, - 206.81844063999998, - 168.94659268, - 169.072930275, - 151.420703055, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 64.0594869676, - 69.3942565508, - 118.1059711435, - 183.152754178, - 240.42615942799998, - 245.295669428, - 246.26443942799997, - 243.638539428, - 237.150879428, - 221.75488942799998, - 199.67484942799996, - 206.427992976, - 150.775396235, - 115.34805707999999, - 115.35719230699999, - 80.1212197812, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 14.6882387988, - 75.2076569492, - 80.3885928609, - 140.72768956099998, - 137.094649561, - 163.171518716, - 178.463918716, - 178.584258716, - 171.374188716, - 159.047138716, - 122.78277310899999, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 11.3183987988, - 62.591066903400005, - 61.620917251799995, - 114.90788791000001, - 119.98777784800001, - 186.656184398, - 180.309956645, - 189.524268716, - 179.607148716, - 164.88631871599998, - 123.36221345799999, - 97.9005165071, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.194454134, - 33.7228417669, - 33.9055215817, - 62.0983558869, - 87.6459498613, - 153.78395711800002, - 231.52333942799996, - 240.197609428, - 245.169769428, - 246.493829428, - 244.26313942799996, - 238.49607942799997, - 228.27404942799998, - 213.88450942799997, - 207.242362976, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.4071003996, - 33.4662546745, - 61.6644347284, - 86.90495086979999, - 152.869496897, - 230.402639428, - 238.78407942799996, - 244.19103942799998, - 245.99332942799998, - 244.16747942799998, - 238.45839942799998, - 228.64937942799997, - 214.17428942799998, - 207.431212976, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 61.0692464553, - 86.8347729769, - 139.412798432, - 205.30404942799998, - 202.58419942799998, - 227.99749942799997, - 234.859959428, - 232.059719428, - 224.30294942799998, - 218.22037942799997, - 206.966599428, - 206.571482976, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 61.0984343479, - 88.000816009, - 156.278473491, - 235.486549428, - 245.010189428, - 248.338949428, - 249.613829428, - 249.357719428, - 243.15498942799996, - 232.31458942799998, - 216.43569942799996, - 206.984372976, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 59.8517699823, - 70.327085302, - 120.12863838559998, - 186.049638716, - 242.992039428, - 246.97988942799998, - 247.208189428, - 244.030239428, - 238.46450942799999, - 229.54659942799998, - 215.455039428, - 203.58315512700003, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 21.1638687988, - 84.09625960599999, - 96.7225708282, - 159.22080956099998, - 163.982639561, - 200.56164871599998, - 186.407898716, - 155.64161738599998, - 150.37223055600003, - 151.90098231599998, - 120.646965259, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 61.0298549706, - 87.6052969132, - 154.690187712, - 232.975649428, - 241.990679428, - 247.204869428, - 248.555129428, - 246.16845942799998, - 240.08791942799996, - 230.06842942799997, - 215.17755942799997, - 204.824035127, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.1785797869, - 33.3424234438, - 58.028736127200006, - 78.279393735, - 156.04157423400002, - 235.41783942799998, - 235.19183942799998, - 237.24539942799998, - 249.750959428, - 249.24291942799996, - 242.58904942799998, - 199.256069428, - 199.90617942799997, - 203.17426512699998, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.2521630321, - 58.042177290299996, - 89.2394074905, - 157.23230609300003, - 236.16980942799995, - 245.375899428, - 248.726819428, - 249.927869428, - 249.639959428, - 243.172539428, - 232.534549428, - 196.648649428, - 204.248705127, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 58.0257150158, - 80.00503823580001, - 147.16584901, - 211.579489428, - 217.73848942799998, - 228.064989428, - 201.30117942799995, - 227.902999428, - 216.22808942799998, - 202.17289942799997, - 204.97020942799998, - 203.001675127, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.9500601412, - 81.9974211548, - 146.446743534, - 217.925129428, - 224.370149428, - 232.56778942799997, - 227.56961942799998, - 225.911099428, - 217.218459428, - 210.58561942799997, - 202.519429428, - 203.001675127, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 56.1084519094, - 65.8739707272, - 111.11838645670001, - 174.902008716, - 234.88961942799997, - 237.291524009, - 239.002000044, - 258.96709615000003, - 252.74224895999998, - 232.01219021400001, - 215.43402158300003, - 206.29326045000002, - 151.285513646, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 18.549994497799997, - 22.0016387988, - 84.6490736895, - 86.4860908282, - 150.435675399, - 162.42258789000002, - 212.658438476, - 201.81653651300002, - 197.63704522, - 200.99674064100003, - 178.37681601100002, - 122.16730727800001, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 57.001491930300006, - 88.5084083999, - 155.846528587, - 232.86794681900003, - 240.72061945, - 229.485399428, - 246.695659428, - 244.559639428, - 231.083249428, - 228.73672942799996, - 205.33188942799998, - 205.461917194, - 168.77940147799998, - 168.94912337600002, - 151.31211313999998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 57.980951193799996, - 84.8457472648, - 147.221242539, - 218.629001152, - 241.01615942799998, - 245.60335942799998, - 236.79227942799997, - 245.05292942799997, - 238.86301942799997, - 228.705949428, - 214.874979428, - 205.57117512699998, - 168.489065812, - 168.51333617699999, - 150.902469304, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 54.64026585330001, - 89.5268164732, - 157.42452108799998, - 235.48992110799998, - 235.47182942799998, - 238.61090942799999, - 234.976159428, - 235.00010942799997, - 233.496579428, - 223.07695942799998, - 216.28564942799997, - 203.558505127, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 54.6522651167, - 89.996609359, - 158.19072913800002, - 236.91099942799997, - 245.270239428, - 248.870009428, - 249.748199428, - 247.31971942799998, - 241.05410942799998, - 230.970649428, - 212.193919428, - 201.718477277, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.7969248226, - 87.1419456858, - 157.15159927999997, - 235.14390942799997, - 243.11769942799998, - 246.88391942799998, - 246.48458942799996, - 242.88057942799998, - 237.73339942799998, - 221.574679428, - 211.211469428, - 202.653707277, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 53.5120818321, - 72.1357822177, - 116.13906359960001, - 186.830724791, - 243.27457942799998, - 247.760899428, - 248.50555942799997, - 246.061589428, - 239.62857942799997, - 229.747049428, - 215.76237942799997, - 203.022937277, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.871006648300002, - 68.67744104580001, - 79.2660339376, - 153.128079561, - 152.781699561, - 188.086408716, - 192.490818716, - 185.398918716, - 181.54126871600002, - 170.108008716, - 126.941929561, - 82.8349182551, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.5802090928, - 82.39150418280002, - 143.350764585, - 224.13923718099997, - 236.63988942799998, - 245.060589428, - 249.10148942799998, - 250.021199428, - 247.16810942799998, - 240.656269428, - 230.58179942799998, - 216.29783942799997, - 155.24320656499998, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.1137200688, - 82.8802911812, - 143.627160406, - 223.996831309, - 236.05573942799998, - 244.292709428, - 248.87162942799998, - 249.982829428, - 247.27223942799998, - 240.754279428, - 230.82607942799999, - 216.67142942799998, - 155.63881656499998, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.0562858942, - 83.0717459457, - 143.949229154, - 224.304881176, - 235.818949428, - 243.08051942799997, - 247.22165942799998, - 248.05650942799997, - 245.81473942799997, - 240.02306942799996, - 230.38495942799997, - 216.53637942799998, - 155.72582656499998, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.76560936519999, - 80.2912219564, - 144.43459250299998, - 224.84923269700002, - 236.86214942799998, - 245.18427942799997, - 249.272939428, - 249.97569942799998, - 247.24107942799998, - 240.45920942799998, - 230.39088942799998, - 216.47952942799998, - 155.63011656499998, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.74980254120001, - 80.31586904580001, - 143.99779658100002, - 223.514970005, - 234.16304942799997, - 241.62573942799997, - 245.084499428, - 246.92168942799998, - 245.123759428, - 239.621479428, - 230.40541942799996, - 216.91004942799998, - 156.05446656499998, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 69.9624117576, - 62.5211928384, - 109.4309073523, - 177.422058716, - 237.790659428, - 246.13676942799998, - 249.82544942799998, - 250.813859428, - 248.863369428, - 242.527369428, - 228.38130942799998, - 211.30550942799997, - 137.106406988, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 13.631298798800001, - 74.78951052859999, - 89.8468455384, - 155.150939561, - 163.21331956100002, - 201.782978716, - 202.516118716, - 199.77512871599998, - 193.528598716, - 183.526438716, - 134.279839561, - 85.76476825510001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.43221119629999, - 80.534782419, - 145.55771406, - 226.443439253, - 238.483339428, - 246.501139428, - 249.92033942799998, - 250.633859428, - 247.258959428, - 240.52271942799996, - 230.80742942799998, - 217.373389428, - 156.505336565, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.7159433771, - 79.88475229329998, - 140.444884554, - 214.873072607, - 233.504019428, - 238.90510942799997, - 237.99142942799998, - 238.264939428, - 236.737549428, - 226.907299428, - 230.10521942799997, - 216.77062942799998, - 152.796578716, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.3879845974, - 80.65360106380001, - 145.132872913, - 224.83137593299998, - 236.24298595800002, - 243.959789543, - 248.431849101, - 249.059836979, - 246.29821942799995, - 240.02015942799997, - 230.37158053499996, - 216.75462514199998, - 152.88780665299998, - 169.242880395, - 151.67589048099998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.2322218632, - 33.60771122, - 33.800378684900004, - 34.1789560652, - 34.3747106047, - 69.00169124979999, - 81.99469163559999, - 145.694039917, - 224.550831632, - 234.805219428, - 241.073669428, - 244.763779428, - 246.64778942799995, - 245.253429428, - 239.867489428, - 230.216499428, - 216.574739428, - 152.769188716, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 68.21642204620001, - 81.1389499349, - 145.410741746, - 218.353446071, - 226.37597942799997, - 240.79992942799998, - 238.98285942799998, - 238.63711942799998, - 234.91378942799997, - 232.784019428, - 228.94470942799998, - 210.25080942799997, - 151.093218716, - 168.489065812, - 150.808750933, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 66.8440449977, - 63.3308198436, - 109.7583088657, - 169.78048333900003, - 230.785159428, - 243.409659428, - 247.166079428, - 247.43301942799997, - 244.25738942799998, - 226.53393942799997, - 224.98619942799996, - 211.00977942799997, - 134.68789913800003, - 115.34805707999999, - 115.34805707999999, - 79.9553430496, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 14.143928798800001, - 74.9441756663, - 87.6089555353, - 151.590419561, - 160.271219561, - 200.277028716, - 201.244638716, - 192.261129945, - 192.039327609, - 182.393874509, - 132.726789561, - 81.8796604056, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.6264595813, - 80.9469880292, - 145.91811715300003, - 226.544529428, - 238.676983546, - 251.08992934100002, - 257.75363437, - 216.23348238, - 235.748508696, - 236.368900634, - 224.62777747, - 207.19918728100004, - 154.28626546499999, - 168.632610177, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.5429693398, - 81.0489714861, - 146.364710796, - 226.59867621200002, - 237.93984942799997, - 245.151749428, - 249.03806942799997, - 250.409449428, - 247.66238942799998, - 241.35525942799998, - 231.130879428, - 204.63270942799997, - 153.281008716, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.5439011054, - 81.19218284860001, - 145.92811697, - 225.312829428, - 235.74499942799997, - 244.54163106, - 253.57652506599996, - 256.998030589, - 253.466569394, - 250.307804221, - 237.10312573, - 218.689842455, - 154.16842411599998, - 168.583890605, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.4918707848, - 81.02924655150001, - 140.40666724099998, - 217.66102942799998, - 235.302024256, - 250.356664243, - 260.412406798, - 252.00652439199996, - 255.86542950600003, - 257.57594634599997, - 244.302290299, - 222.15126164499998, - 154.93885130200002, - 170.01510849299999, - 151.615747781, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.477519776099996, - 80.9145461287, - 147.555861781, - 228.82634942799996, - 241.096630038, - 260.614335821, - 279.16082357700003, - 287.826100331, - 284.00922907399996, - 270.515885651, - 253.513644919, - 233.918537953, - 159.126566426, - 169.595140774, - 151.139541776, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 62.392231850600005, - 63.182662440099996, - 111.1549164335, - 178.86599786, - 249.923024742, - 273.98893460700003, - 284.238509064, - 284.158388063, - 284.063729067, - 281.771377045, - 268.10783587599997, - 221.49038083800002, - 136.45942186799996, - 116.044688571, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 15.1452087988, - 77.7086408, - 92.8090898248, - 157.60776956100003, - 165.702339561, - 203.66982871599998, - 204.456218716, - 202.799628716, - 195.738308716, - 185.319838716, - 135.305749561, - 83.51086040560001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.4407085945, - 81.871298274, - 148.27741590999997, - 228.457548597, - 239.580599428, - 246.861649428, - 250.43224942799998, - 250.36052942799998, - 238.577619428, - 241.18252942799998, - 231.42957942799998, - 217.99456942799998, - 154.315118716, - 165.062747963, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.43753969810001, - 81.9872973375, - 147.292101857, - 221.60717879100002, - 228.823609428, - 241.43119942799999, - 245.73048942799997, - 247.33904942799998, - 245.406619428, - 239.94854942799998, - 230.33758942799997, - 217.25788942799997, - 153.970188716, - 165.062747963, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.3562861956, - 82.2327160203, - 147.80691131, - 217.72270942799997, - 231.38435942799998, - 245.14066942799997, - 249.621059428, - 250.69608942799996, - 248.107169428, - 241.815459428, - 232.02507942799997, - 218.13131942799998, - 154.312508716, - 165.062747963, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.3032653825, - 82.3991644458, - 148.845515157, - 229.346572344, - 240.90316942799998, - 248.39872942799997, - 251.68682942799998, - 252.604919428, - 250.486009428, - 243.61318942799997, - 218.04003942799997, - 218.10284942799998, - 154.302588716, - 165.062747963, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.6103889724, - 82.5015645176, - 149.078074339, - 229.60014942799998, - 241.05125942799998, - 249.081589428, - 251.829629428, - 252.531869428, - 249.74654942799998, - 242.94308942799998, - 232.50921942799997, - 218.20993942799998, - 154.512668716, - 165.062747963, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 59.1811872471, - 64.625653984, - 113.53913771340001, - 181.026528716, - 240.08097942799998, - 246.99327942799997, - 250.24188942799998, - 250.02873942799997, - 246.91414942799997, - 241.006118911, - 232.032122408, - 218.54835970599999, - 137.19492904600003, - 111.993546315, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 15.227888798799999, - 77.25841308209999, - 90.6218608282, - 156.52121751399997, - 176.134968332, - 223.95833933100002, - 223.117649116, - 220.157772618, - 214.05023976200002, - 202.651482937, - 142.973074411, - 85.0009487808, - 28.4499880461, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.012407788800004, - 82.0939927326, - 148.18850697499997, - 227.70151942799998, - 239.288077421, - 250.57088633, - 254.735318938, - 255.589043628, - 252.99883681699998, - 246.304659448, - 235.825235372, - 220.14958850099998, - 155.79986062900002, - 165.73295948799998, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.308516406, - 82.19827423989999, - 148.98296448099998, - 228.92246942799997, - 239.530259428, - 248.605908976, - 257.24138475099994, - 255.778577224, - 252.73571673100002, - 246.178919767, - 235.974109584, - 221.990823456, - 157.094293242, - 165.94027216900002, - 150.895940876, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.1719545604, - 77.49707563470001, - 148.821245398, - 216.15367942799998, - 240.27224942799998, - 205.89491942799998, - 224.99708942799998, - 254.91293345699998, - 270.25958563399996, - 265.781811182, - 268.69971213400004, - 257.47850198599997, - 195.78843733500003, - 198.018011367, - 171.932761304, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.6326017304, - 82.4102079016, - 149.133899138, - 219.374135715, - 259.065627319, - 277.270925685, - 288.512637788, - 285.366961877, - 288.356529171, - 259.09280485200003, - 244.340633355, - 236.98229650400003, - 170.652035353, - 174.865144519, - 152.22057897000002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.9689370248, - 77.3046024499, - 148.81294913800002, - 229.72853657500002, - 221.115816104, - 226.735914213, - 241.846956752, - 240.56869875700002, - 241.07255317000002, - 235.231093607, - 237.062341124, - 222.283754256, - 160.436578452, - 167.277039323, - 151.573968991, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 55.532393595900004, - 64.3425693677, - 114.9314041716, - 182.941008716, - 242.197029428, - 249.49334041900002, - 253.06922359600003, - 253.70665119500003, - 250.557965217, - 243.75172859600002, - 233.808807159, - 219.84868778400002, - 138.294368951, - 111.972841031, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 18.2799044978, - 16.6157587988, - 78.7597656058, - 92.07931528200001, - 154.83496956099998, - 160.442839561, - 198.48591871600001, - 199.713520529, - 198.128968925, - 192.56541616700002, - 183.46298169, - 134.477792386, - 84.28829040560001, - 28.4499880461, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.8943350041, - 82.56898047170002, - 149.07030765099998, - 228.341489428, - 238.06853942799998, - 246.394493072, - 256.08738273299997, - 257.98204976600005, - 255.98967464400002, - 251.964732593, - 243.24679662100002, - 230.640312184, - 163.840180262, - 163.13113847999998, - 151.564485868, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.895779064699994, - 82.4187820215, - 149.03207712799997, - 227.84770942799997, - 236.834959428, - 242.527479428, - 245.80689942799998, - 247.228789428, - 245.514839428, - 239.83893942799997, - 230.663309428, - 217.880259428, - 155.245378716, - 161.63643011300002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 57.193419216900004, - 82.5468656264, - 149.150550346, - 228.12952942799998, - 231.12895942799997, - 236.672746224, - 247.738024547, - 247.97565903499998, - 245.506759775, - 239.58520899099997, - 230.460960828, - 212.763452928, - 155.18740057000002, - 161.638727569, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 57.1698047047, - 82.7123238136, - 149.38544211299998, - 228.55744942799998, - 237.86875942799998, - 243.809736812, - 247.96174837900003, - 248.988059393, - 245.40021551200002, - 239.852812702, - 231.482164219, - 219.14732540200004, - 156.12937729, - 162.36046872499998, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.8746537333, - 82.84970444759999, - 148.530300963, - 227.26139942799998, - 236.89713942799997, - 244.204229428, - 246.91921942799996, - 246.047019428, - 242.168669428, - 235.76285942799998, - 228.13601942799997, - 216.74233942799998, - 155.092518716, - 161.63643011300002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 56.0247416906, - 65.2334866996, - 114.0898186309, - 179.58671366200002, - 236.77317942799996, - 242.52001942799998, - 245.11258942799998, - 245.25065942799998, - 242.87391942799997, - 237.63444942799998, - 229.14403942799999, - 217.22612942799998, - 137.58108913800004, - 108.495421381, - 115.392130624, - 80.1688104385, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.0190266483, - 16.6984587988, - 79.34105784229999, - 90.9274450543, - 153.163901069, - 160.50316801, - 199.27278834700002, - 199.821917123, - 197.237936357, - 191.115098716, - 181.649808716, - 134.055519561, - 84.6451365757, - 25.0236701967, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 55.214467464200006, - 84.5646780826, - 150.889083229, - 229.83606793899997, - 239.168723265, - 245.849989922, - 249.47624409499997, - 249.34805594199997, - 247.17919942799998, - 240.94981942799998, - 231.61770942799998, - 218.81979942799995, - 156.077091449, - 161.993373463, - 151.23928744699998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 55.3832138979, - 83.3214001006, - 150.64764744599998, - 227.951258324, - 238.51418942799998, - 238.01666942799997, - 221.54275942799995, - 226.323689428, - 228.70579942799998, - 207.781049428, - 206.853929428, - 202.97652942799996, - 149.688048716, - 161.63643011300002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.9600285541, - 83.1683246683, - 145.688792424, - 216.81711942799998, - 220.99963942799997, - 208.411789428, - 228.020689428, - 237.49355942799997, - 233.27982942799997, - 218.02239942799997, - 221.27764942799996, - 211.620709428, - 155.79826871600002, - 161.63643011300002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 54.033320430299995, - 83.5038280893, - 150.530390609, - 229.576756545, - 239.617039428, - 246.56247942799996, - 250.361629428, - 250.84612942799998, - 221.68032942799996, - 229.109339428, - 209.883809428, - 204.07293942799998, - 149.257958716, - 161.63643011300002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 54.193731748, - 83.92582535239998, - 151.165737726, - 230.237109428, - 239.92581942799998, - 246.58658942799997, - 249.72547942799997, - 249.181049428, - 245.873119428, - 239.39239942799998, - 230.42611942799996, - 217.648289428, - 155.79815871600002, - 161.63643011300002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 52.83817409070001, - 66.3773447168, - 115.24050882629999, - 181.343705912, - 239.35351942799997, - 246.31200942799998, - 248.85802942799998, - 247.72640942799995, - 243.93245942799996, - 237.46670942799997, - 229.007339428, - 217.435920059, - 138.45739623600002, - 108.91066667199999, - 115.77113264900001, - 80.47840571260001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.485966648300002, - 17.9675987988, - 80.693277599, - 92.8861223978, - 154.882916544, - 160.642534854, - 198.208858716, - 197.25665871599998, - 194.491158716, - 189.035668716, - 180.718798716, - 133.062679561, - 84.55450040560001, - 21.5973523472, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 54.38703122850001, - 84.4325531253, - 150.504016623, - 227.881664546, - 236.801525945, - 243.62584054900003, - 247.25970078499998, - 247.72744942799997, - 245.263329428, - 239.05568942799997, - 229.652169428, - 218.32006942799998, - 156.200712767, - 158.33658941899998, - 150.978757199, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 51.286952625199994, - 84.21860700730001, - 151.082888641, - 229.65766518, - 238.86308942799997, - 244.96928942799997, - 247.22560346199998, - 248.243791801, - 247.97800699900003, - 248.987922639, - 242.619279787, - 229.927102689, - 161.66842733, - 158.601014037, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.9111780358, - 83.9685014326, - 150.37999333399998, - 228.73693942799997, - 237.54177942799998, - 243.36666942799997, - 245.577709428, - 244.55885942799998, - 244.07546121000001, - 242.37407030000003, - 233.819980385, - 221.3126759, - 156.328864414, - 158.244194051, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.70563842749999, - 83.73663492719999, - 149.895545117, - 228.12896942799998, - 236.91792942799998, - 242.94207942799997, - 245.33705942799998, - 244.97661942799996, - 241.637779428, - 236.483509428, - 228.11059942799997, - 216.454589428, - 155.676708716, - 158.210112264, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.720432230700006, - 83.92756348759998, - 149.485038958, - 226.58125942799998, - 234.93327942799996, - 241.54949942799996, - 245.08574942799999, - 245.797429428, - 243.37032942799996, - 237.917199428, - 229.09534942799996, - 217.04313942799996, - 155.911958716, - 158.32811226400003, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 49.6489191292, - 66.5767684835, - 115.1725080478, - 179.26081871600002, - 233.068999428, - 240.36564942799998, - 241.079319428, - 248.914729428, - 246.03112942799999, - 231.55072942799998, - 226.60359942799997, - 215.250099428, - 137.699699138, - 105.28864353099999, - 115.34805707999999, - 79.9415925372, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 12.6229387988, - 18.9734187988, - 77.8120178607, - 89.90397647089999, - 154.98941956099998, - 161.217229561, - 200.48966871599998, - 167.131678716, - 171.097928716, - 193.051798716, - 183.64663871599998, - 128.095159561, - 85.8296904056, - 21.7243623472, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 51.9819339479, - 85.8689844836, - 151.884334377, - 213.95134157700002, - 240.32683942799997, - 247.20157942799997, - 250.88147942799998, - 245.00076942799998, - 220.47282942799998, - 201.447499428, - 225.98202942799998, - 212.163969428, - 157.008998716, - 158.60622226400002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 51.3553022095, - 84.8613099748, - 152.00492079499998, - 230.823159428, - 227.86054942799998, - 246.60361942799997, - 249.44561942799996, - 249.140119428, - 231.184339428, - 231.35465942799996, - 229.86210942799997, - 217.382889428, - 156.120398716, - 158.369152264, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 51.3785006977, - 84.8168968403, - 150.23952731800003, - 227.915409428, - 236.88504942799997, - 243.28486942799998, - 247.00094942799998, - 247.49624649900002, - 245.59103723899997, - 241.34372945900003, - 232.147716673, - 219.528456315, - 158.54789535, - 158.38799226400002, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 51.7383614866, - 85.58977825669999, - 150.893864684, - 228.851689428, - 238.229419428, - 245.19514942799998, - 253.014935314, - 259.425135013, - 257.623906251, - 252.017860404, - 242.706834469, - 229.506140294, - 162.784496598, - 159.45415752699998, - 150.791728013, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 51.3603945988, - 85.087841344, - 150.967459996, - 229.10864942799998, - 238.45899942799997, - 246.792641042, - 260.653868079, - 265.723752306, - 263.222474652, - 259.020540605, - 249.70897854300003, - 236.27890085699997, - 171.013820476, - 161.85811682, - 151.38688413900002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 49.7350698924, - 67.2095292564, - 116.0059778982, - 181.728988716, - 239.207459428, - 246.42265942799997, - 249.989443196, - 261.935373041, - 268.803021338, - 264.43520248, - 255.12019477399997, - 241.721754924, - 153.82558281099998, - 104.52097948299999, - 115.584317649, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 12.551588798800001, - 19.2269687988, - 82.62531907729999, - 95.81293168570001, - 158.234009561, - 164.214369561, - 202.721018716, - 202.478418716, - 199.119171639, - 193.41828128699999, - 184.309467863, - 135.991802394, - 86.61701040560001, - 18.9456644978, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.3264179058, - 85.34562734289999, - 152.329076286, - 230.938309428, - 240.18135942799998, - 246.57391942799998, - 249.99392942799997, - 251.89603599499998, - 252.92846674799998, - 247.42595661399997, - 238.366259617, - 225.671842219, - 164.420576222, - 156.291785927, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.5851861325, - 85.71609799390001, - 152.059140338, - 230.849909428, - 240.61871942799996, - 247.321879428, - 250.760909428, - 244.82294431900002, - 209.35486912000002, - 233.49251359599998, - 235.377717366, - 220.613144344, - 157.466413783, - 155.476114809, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.3634975468, - 85.2555748883, - 151.49869913800003, - 229.89148942799997, - 239.13252942799997, - 245.50172942799998, - 249.044589428, - 249.50559661999998, - 248.900460062, - 243.584534967, - 227.282967975, - 217.106808135, - 156.38711254000003, - 155.30223583, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.314760714900004, - 85.24631853359999, - 151.46851315900003, - 230.30860942799995, - 240.179689428, - 247.13971942799998, - 250.81204942799997, - 251.29268942799996, - 248.02825942799998, - 243.581185062, - 234.727267129, - 221.708859175, - 157.76520456400002, - 155.778694414, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.10426650189999, - 85.04575109559998, - 151.984898147, - 230.33436942799997, - 238.89147942799997, - 244.08066942799996, - 246.52412942799998, - 246.350729428, - 244.061769428, - 238.512799042, - 230.11845013900003, - 218.273864729, - 157.345298716, - 155.94016441399998, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 50.168172168800005, - 67.5621999894, - 116.8967132402, - 182.197426134, - 239.34731496400002, - 245.085961202, - 247.57622942799998, - 247.03709942799998, - 243.62619942799998, - 237.28892942799996, - 229.30115942799998, - 218.19413942799997, - 139.663389138, - 102.77306568200001, - 115.355332177, - 80.138469693, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 12.6168387988, - 18.8145287988, - 81.26824500400001, - 92.7641441966, - 154.39419058000001, - 159.74135956100002, - 197.283218716, - 196.260518716, - 192.677228716, - 188.334968716, - 181.198508716, - 134.271479561, - 86.3370404056, - 19.2480344978, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.73659306999999, - 85.09247036309999, - 150.792560261, - 227.842739428, - 236.72138942799998, - 243.13469942799998, - 246.68063942799995, - 247.287899428, - 244.76813942799998, - 239.05865942799997, - 230.396919428, - 218.35528942799996, - 157.297798716, - 155.987094414, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.4342724193, - 84.99568259050001, - 151.205520935, - 228.35131942799998, - 236.49957942799998, - 242.13891666299997, - 247.505963367, - 253.11963726800002, - 253.486369444, - 248.930336094, - 241.14763384, - 229.229933562, - 167.88159073699998, - 158.166777689, - 150.810815219, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.1063584972, - 84.6251929628, - 150.31777913800002, - 227.670599428, - 236.27315942799999, - 244.316513797, - 255.82519675799998, - 260.585966677, - 258.258651047, - 252.84911879700005, - 244.329654017, - 232.30401398200001, - 169.24599829, - 157.953283835, - 150.931600333, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.9250044176, - 84.78435273209999, - 146.90896285, - 229.488169428, - 238.75706942799997, - 235.132149428, - 248.51457942799996, - 248.57191942799997, - 245.812899428, - 243.109343089, - 237.05551296699997, - 224.79582627399998, - 160.87063543800002, - 156.42800753300003, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.322902290900004, - 85.2247853116, - 152.005012637, - 230.465839428, - 239.836689428, - 246.36419942799998, - 249.77324942799999, - 250.05750942799997, - 247.41593942799997, - 241.427449428, - 232.32396942799997, - 219.84046942799998, - 158.234618716, - 156.534154414, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 50.7368776258, - 68.2126644974, - 116.7913163564, - 182.195418716, - 239.82835942799997, - 246.631869428, - 249.86323942799999, - 250.11448942799998, - 247.15286942799997, - 241.081779428, - 232.11022942799997, - 219.560209428, - 140.422509138, - 99.84662783259999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 13.1689587988, - 19.505928798800003, - 80.90470275140001, - 92.2083552715, - 153.766539561, - 160.001009561, - 198.71006412799997, - 216.020419622, - 211.703477984, - 198.266171809, - 189.981276198, - 136.628501973, - 87.15307426679999, - 16.5335166483, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 12.8471887988, - 19.0737187988, - 80.1571320129, - 91.8204317235, - 171.044559237, - 180.083710793, - 214.10140183899998, - 215.337881353, - 214.93586040199997, - 210.01558254600002, - 201.633762271, - 151.45336695799998, - 96.6015416743, - 16.3873966483, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 50.994599547199996, - 84.92648040560002, - 150.54976913800002, - 228.484720458, - 250.315452636, - 279.612662497, - 300.540939723, - 309.416831334, - 297.520508286, - 295.291239114, - 279.128060381, - 259.521947569, - 192.584620922, - 180.52399473000003, - 168.73154143, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.284314034400005, - 84.54119040560002, - 151.392185961, - 257.26236188499996, - 274.46780305000004, - 286.58546152900004, - 292.821741354, - 294.83837470899994, - 293.057162398, - 286.65736393699996, - 276.155171133, - 260.056120541, - 191.77082921800002, - 178.75186625799998, - 166.82110053099998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.2603340344, - 84.44906040560001, - 146.25207913800003, - 213.855769428, - 234.533786553, - 250.167692345, - 251.789472184, - 247.689467819, - 232.704065165, - 253.81654187499998, - 237.34456570499998, - 244.40840928599997, - 177.53547945399998, - 162.369625581, - 151.862205698, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.3107813978, - 84.6430098394, - 150.06357913800002, - 228.25339942799997, - 236.36730942799997, - 242.08180942799996, - 245.96464942799997, - 242.238559428, - 230.65026942799997, - 232.469402943, - 226.95711880200002, - 213.63667401899997, - 155.692779671, - 152.720966565, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 50.505972087100005, - 66.85784952040001, - 111.1152415667, - 163.122408716, - 228.09496942799996, - 233.922249428, - 239.49399942799997, - 239.24323942799998, - 236.95336942799997, - 216.69271942799998, - 214.467649428, - 209.33763942799996, - 135.65319913800002, - 99.89477783259998, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 13.037758798799999, - 19.0782287988, - 79.5651489945, - 90.57901441450001, - 152.334829561, - 157.835569561, - 195.010998716, - 193.81232871600002, - 191.025708716, - 186.645488716, - 179.533698716, - 133.222129561, - 86.75341040560001, - 16.924256648300002, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.3268850392, - 84.7349293869, - 150.13433100400002, - 227.241109428, - 235.75164942799995, - 241.90315942799998, - 245.33372942799997, - 246.043599428, - 243.751089428, - 238.33008942799998, - 229.98526942799998, - 218.73078942799998, - 158.226718716, - 153.890896565, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.192820823, - 82.01971703680002, - 142.28364159699998, - 205.51043942799998, - 207.626519428, - 235.01978942799997, - 230.043319428, - 246.782849428, - 244.94341942799997, - 230.34752942799997, - 230.95344942799997, - 218.85157942799998, - 158.270068716, - 153.13109656499998, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.7869636396, - 85.21617398160001, - 151.263929733, - 229.39921942799998, - 238.74177942799997, - 245.266579428, - 248.87673942799998, - 249.386983041, - 246.997307833, - 241.742700913, - 232.91418580699997, - 220.716252987, - 158.88878889, - 154.056536565, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.3129415735, - 85.4275186922, - 152.731627983, - 231.50940942799997, - 241.38975942799996, - 248.11596942799997, - 252.56341731600003, - 256.886079953, - 256.73690862899997, - 252.14068987800002, - 242.95008794799998, - 230.47414875700002, - 168.031758145, - 155.658685133, - 150.817551839, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.239189130899994, - 85.51939915759999, - 153.24930903799998, - 232.183573499, - 241.81878942799997, - 248.303619428, - 250.95572942799998, - 248.36479942799997, - 247.916629428, - 241.87163942799998, - 232.93446942799997, - 220.72907942799998, - 159.33926871600002, - 154.585486565, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 49.8832650121, - 67.3768809365, - 116.3566855645, - 181.819318716, - 238.53248942799996, - 244.07188942799996, - 246.74879942799998, - 246.320629428, - 244.792259566, - 239.918135699, - 232.123084831, - 221.610350009, - 140.924289138, - 101.22005783259999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 12.847648798800002, - 18.904488798800003, - 80.5411693085, - 92.1847617411, - 153.804369561, - 159.20362956099999, - 197.01904871600001, - 196.79258871599998, - 194.511238716, - 189.78765871599998, - 182.070238716, - 135.646059561, - 87.9122904056, - 17.7120366483, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.0935190678, - 84.59672483029999, - 150.45200698399998, - 228.16540942799998, - 237.14551942799997, - 243.65010942799998, - 247.272105801, - 248.00860707500001, - 247.27979656700003, - 243.14354168300002, - 234.576760938, - 222.923447001, - 159.424096048, - 154.509329169, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.038741396, - 85.0919053452, - 151.153809138, - 230.02718942799999, - 237.827559428, - 244.179239428, - 249.343676268, - 249.79757852400002, - 248.54834537300002, - 246.00788609699998, - 237.797258508, - 225.78004080099998, - 161.548127287, - 154.646982167, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.22468810589999, - 84.8175505661, - 151.52355913800002, - 229.68683942799998, - 238.786019428, - 245.235019428, - 248.807748156, - 252.254772283, - 251.050253445, - 247.36601893300002, - 240.76015944999997, - 228.719512435, - 164.308238738, - 151.73502709899998, - 150.85270266700002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.1412789993, - 84.81849796370001, - 151.166789138, - 228.867269428, - 236.893519428, - 241.81918942799996, - 243.49483942799998, - 243.32366014800002, - 242.01094195199997, - 237.93723894299998, - 230.310221207, - 219.37089139799997, - 158.80072871599998, - 150.90495871599998, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.197482889199996, - 84.5731988873, - 150.36792913800002, - 227.41162942799997, - 236.16453942799998, - 242.42383942799995, - 246.472876009, - 250.46376483, - 250.824523153, - 248.02679070899998, - 239.683533708, - 228.56798494100002, - 167.338040882, - 155.287074506, - 151.034739169, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 49.680412423199996, - 66.6375713891, - 115.1840599831, - 180.440808716, - 237.82918167399998, - 250.188816973, - 262.356437493, - 270.81970280400003, - 269.989894761, - 264.208346594, - 255.57053490599998, - 243.12368244699996, - 156.520055754, - 101.1102057223, - 115.63158102499999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 13.0586087988, - 18.829438798800002, - 79.87778082819999, - 91.7208308282, - 153.38697956099998, - 158.80642956100002, - 198.36248284700002, - 201.98276343700002, - 203.36052989600003, - 201.854743199, - 193.894452379, - 137.838957652, - 88.20620874379999, - 14.3978787988, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.1982548603, - 84.54187937619999, - 150.69920913800004, - 228.45991942799998, - 236.68973942799997, - 241.63757942799998, - 246.028518184, - 248.23225882499997, - 246.42222789, - 241.90199614, - 234.02211880599998, - 222.989661683, - 159.563813992, - 151.431093908, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.6532804576, - 84.8968763048, - 150.16137913800003, - 227.379739428, - 236.34076035299998, - 246.00248493099997, - 250.542575904, - 258.760029098, - 259.89206374500003, - 254.383033817, - 246.191638775, - 234.72703962399999, - 173.20763270100002, - 156.58510492899998, - 151.363440978, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.229886543, - 84.53580156200002, - 150.02436913800003, - 227.47835942799998, - 235.76978942799997, - 241.98361165000003, - 250.957626618, - 256.83792846999995, - 256.61639562799996, - 251.402803121, - 243.05662208, - 231.583909067, - 170.76826737500002, - 154.82560881400002, - 151.080756455, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.16254367770001, - 84.35288869950001, - 150.31046913800003, - 227.91673942799997, - 236.64821942799998, - 246.17700520700004, - 258.462866469, - 259.844836376, - 260.290357487, - 256.676310845, - 248.08275134500002, - 235.94770841099998, - 172.02117235, - 153.890317549, - 151.183617123, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 50.7188740344, - 83.97938040560001, - 150.000589138, - 227.483029428, - 235.95243260799998, - 245.867442831, - 258.528775085, - 267.160202062, - 269.180432531, - 265.836599875, - 256.585242769, - 244.57292488699997, - 179.474430533, - 161.735248754, - 151.965881156, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 49.4301520293, - 66.2139008282, - 114.39815998310002, - 178.96817871599998, - 236.445617879, - 264.414706984, - 276.26427393, - 275.342793528, - 274.639471783, - 271.503996023, - 263.845061673, - 251.531476951, - 159.979163595, - 101.1970957412, - 115.770391238, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 12.8722487988, - 18.0369587988, - 76.7395108282, - 87.4238808282, - 151.721319561, - 157.67455956100002, - 195.837088716, - 196.970464382, - 192.778745514, - 191.38780682200002, - 184.14004794700003, - 134.121450001, - 87.72246952789999, - 14.2346387988, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 50.9615878153, - 84.0062218258, - 148.158159138, - 224.96878942799998, - 233.475309428, - 242.76067587499995, - 251.86981812599998, - 258.3336711, - 264.758246916, - 263.96253094400004, - 255.060615257, - 242.390298814, - 173.67154505599999, - 154.32071852899998, - 151.327943899, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 50.9452524508, - 83.78242665049999, - 148.83401913800003, - 225.32866942799996, - 233.59791942799998, - 239.903323764, - 253.60909575199997, - 260.636303255, - 258.363539414, - 238.78659178700002, - 228.46930013699998, - 234.181650619, - 170.68425926999998, - 152.17494640400002, - 151.00708229, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 50.9203231366, - 83.8559575219, - 148.99669913800003, - 226.33719942799996, - 234.729749428, - 242.20355993, - 251.42890706900002, - 259.019632651, - 260.37471013799995, - 255.28297311900002, - 246.84015644700003, - 235.06804806500003, - 170.476935237, - 153.01327689299998, - 151.256145403, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 51.13007211909999, - 84.14773330290001, - 150.24382913800002, - 239.663161727, - 264.924661448, - 281.249465074, - 291.550264607, - 298.683142666, - 297.867616257, - 290.37895820800003, - 278.064961456, - 262.435795183, - 193.292218702, - 177.157011821, - 168.608823255, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 26.2544522017, - 50.9479840344, - 84.23040040560001, - 150.80891926100003, - 240.48091778, - 258.182128207, - 269.671409203, - 278.17609128299995, - 284.89719936200004, - 290.15054272200007, - 289.613595248, - 279.716899259, - 262.947237772, - 194.464244761, - 174.872158963, - 165.668991833, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 49.4597975705, - 65.9841208282, - 114.4417248046, - 190.161646816, - 262.192895169, - 280.34071803, - 290.336274328, - 296.039042589, - 295.671282488, - 292.00512390899996, - 283.37453958200007, - 267.250633349, - 173.24876887999997, - 115.965794462, - 120.306294849, - 80.0698222023, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 12.3779387988, - 17.7880587988, - 79.5950208282, - 91.7363208282, - 153.360099561, - 158.661659561, - 197.400438716, - 198.127318716, - 196.054438716, - 191.248848716, - 183.40532871599999, - 136.954219561, - 88.9498104056, - 14.906028798800001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.5193406074, - 83.6135326716, - 150.54260913800002, - 228.84500942799997, - 237.71158942799997, - 243.73786942799998, - 247.24895942799998, - 249.628716011, - 249.850928518, - 249.78151201900002, - 244.062343909, - 232.43957513600003, - 170.848667081, - 161.80090664600002, - 154.363492149, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.4291275843, - 83.61708914339998, - 150.38867913800001, - 228.24296942799998, - 242.545917101, - 260.24178134600004, - 266.991932488, - 272.209243563, - 273.912571777, - 272.906354514, - 265.201409747, - 252.64017375, - 186.40602452599998, - 169.180249641, - 160.18981846, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 12.3344487988, - 17.7057887988, - 78.76206082819999, - 89.8557308282, - 150.057579561, - 155.710299561, - 186.104008716, - 195.44098871600002, - 191.922528716, - 187.317318716, - 179.846038716, - 134.967079561, - 87.8757504056, - 14.198038798799999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.7033840344, - 83.51644040560001, - 148.208519138, - 225.168229428, - 233.32700942799997, - 239.179329428, - 244.72127987599998, - 251.121113624, - 247.65648156700001, - 251.01603749699999, - 243.328763367, - 232.101014263, - 171.378893468, - 159.29917992599997, - 151.86065946, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 51.1541440344, - 84.3618804056, - 147.93403913800003, - 224.88243942799997, - 233.15776942799997, - 239.18783942799996, - 242.786469428, - 238.299329791, - 240.924100637, - 244.294814126, - 237.083505777, - 226.345829809, - 166.060823892, - 157.661011202, - 152.202488214, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 49.4144220293, - 65.6946608282, - 113.3750099831, - 178.41721871599998, - 235.47621942799998, - 241.95426942799998, - 252.61053682399998, - 271.49427770799997, - 281.85377422600004, - 278.535897406, - 269.318127036, - 256.478695698, - 164.411957237, - 107.989512838, - 116.39220425100001, - 79.9769903236, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 12.4003387988, - 17.3585687988, - 78.3781708282, - 90.7191808282, - 152.974659561, - 159.437349561, - 201.591318908, - 206.502873062, - 214.468739951, - 219.50816826300002, - 212.92692912500002, - 164.19775739099998, - 104.5304022606, - 14.7159187988, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.5272240344, - 83.28125040560002, - 151.183401079, - 258.316085275, - 272.1553947, - 283.466189734, - 293.22072942600005, - 299.375452587, - 301.686197453, - 298.769424085, - 286.59564381999996, - 269.77130502399996, - 199.32809372999998, - 179.62073431, - 171.210388531, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.6772340344, - 82.22552040560001, - 150.73955345500002, - 238.728375321, - 273.341995726, - 286.366201945, - 286.59320299399997, - 292.89047754999996, - 293.83468345200004, - 284.372294618, - 291.52311339900007, - 279.10919038000003, - 208.981164198, - 190.481060774, - 179.807210874, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.8294240344, - 83.80015040560001, - 153.168134017, - 262.977483237, - 283.95774618300004, - 300.043202867, - 306.034038065, - 308.06135966700003, - 306.591874646, - 301.069954521, - 288.28326569899997, - 270.341943528, - 200.783490457, - 181.765171176, - 171.283026297, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.29334403440001, - 83.08513040560001, - 149.43386913800003, - 242.75308958700003, - 272.802222413, - 292.818105652, - 302.28443197400003, - 306.85985431800003, - 307.01626110800004, - 299.41730524699994, - 286.03085472500004, - 267.54065319, - 197.886285564, - 178.09520998099998, - 167.839345221, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.2050840344, - 82.81207040560001, - 149.229429138, - 227.529122764, - 241.349032252, - 261.587288494, - 276.106463029, - 279.94520756900005, - 279.85121021500004, - 275.618244591, - 266.536542445, - 253.358941891, - 186.695965057, - 169.084052262, - 157.498943054, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 48.413852029299996, - 64.0094008282, - 109.9660499831, - 171.10222871599998, - 226.602413909, - 229.32311476, - 249.35486039100002, - 256.707277418, - 262.379780359, - 269.809877282, - 262.469186876, - 252.32862363200002, - 165.22503594699998, - 110.75941278, - 117.925389548, - 79.98958878010001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 11.8310787988, - 16.8402087988, - 76.78892082819999, - 88.19315082819999, - 149.812959561, - 156.195939561, - 200.29313000999997, - 214.695225888, - 217.912290123, - 216.3165948, - 208.92204242100001, - 154.109787012, - 95.613218999, - 13.874688798800001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.285054034400005, - 82.56840040560002, - 148.06195913800002, - 225.898789428, - 234.744879428, - 247.936587723, - 262.616509682, - 271.716021174, - 274.599016104, - 273.326771776, - 263.898581881, - 251.00364359800002, - 185.416712579, - 168.824375189, - 159.963594889, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.152644034400005, - 82.6305804056, - 148.839569138, - 227.00474942799997, - 243.539125157, - 262.05300099, - 271.53441019699994, - 277.023998215, - 278.519507103, - 276.635984272, - 269.697297519, - 257.551967384, - 189.715949243, - 172.36643837300002, - 165.776130203, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.11388403440001, - 82.6045004056, - 148.98353913800003, - 227.325859428, - 236.42632942799997, - 242.871039428, - 252.304870607, - 260.28015307100003, - 259.532812256, - 255.33726901499998, - 248.444854515, - 237.036839803, - 175.719463464, - 168.195043545, - 156.431284627, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 29.6807700512, - 50.0692840344, - 82.48658040560001, - 148.71410913800003, - 226.964429428, - 236.05617942799998, - 246.92564387000002, - 260.759464251, - 272.30714696200005, - 278.50146840300005, - 276.799263614, - 268.544796982, - 255.971262613, - 191.207550579, - 178.41732656399998, - 167.429539322, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.0675440344, - 82.40904040560001, - 148.85090913800002, - 229.907909631, - 265.270362197, - 290.14844208, - 300.29048602700004, - 305.15336401900004, - 305.000191893, - 301.43071935200004, - 288.432855512, - 271.18962167, - 199.48245734, - 182.145861244, - 170.68963433899998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 48.8807420293, - 64.79859082819999, - 112.98088998310001, - 178.400928716, - 246.08004676999997, - 273.7659737, - 287.512579863, - 289.964267122, - 286.85998867599994, - 284.74854792699995, - 277.027666184, - 261.348038622, - 168.939371816, - 118.04228909999999, - 122.21843333400001, - 80.18843100389999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 12.243148798800002, - 16.6262387988, - 76.7762308282, - 88.3605008282, - 150.552695892, - 161.881086704, - 215.286235204, - 220.91253774, - 219.255015339, - 215.56495779200003, - 208.358008576, - 158.358366243, - 99.5831423071, - 15.2810466483, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 49.2751940344, - 77.19351040560001, - 134.060659138, - 202.320559566, - 218.43815672, - 270.95986432499996, - 281.150942801, - 298.787676724, - 259.79973828900006, - 273.63708189, - 264.97190629700003, - 247.007535837, - 195.397879177, - 182.02214550300002, - 171.613422552, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.1471240344, - 82.3362704056, - 147.24497913800002, - 244.335182234, - 274.243430966, - 292.71871727, - 300.47738574, - 303.5542984, - 303.7764528910001, - 305.294799763, - 289.358943527, - 267.310273231, - 194.859218806, - 181.42476757800003, - 171.492411004, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.008594034400005, - 82.05566040560001, - 147.81406913800004, - 225.875979428, - 239.944152358, - 260.938930115, - 273.27771765, - 281.642570614, - 285.03465154099996, - 281.347418475, - 273.549606328, - 261.728333855, - 196.09204008600003, - 181.49938752600002, - 172.159764422, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.0021940344, - 82.0534804056, - 147.82657913800003, - 227.733732358, - 253.69487228100002, - 279.755296634, - 289.180741645, - 295.040319044, - 295.290977455, - 289.259128485, - 281.07113815699995, - 266.024888546, - 195.96749715099998, - 181.79894900599996, - 171.138305608, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 50.040114034400005, - 82.0732904056, - 147.44476913800003, - 225.23592942799996, - 237.989530795, - 263.309328407, - 277.995902698, - 283.132361344, - 283.14221569700004, - 278.561307495, - 269.855249847, - 256.658451946, - 188.30900735799997, - 174.61426594600002, - 166.76309449099998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 48.816672029299994, - 64.47073082819999, - 112.1987099831, - 177.286928716, - 237.91208351100002, - 251.41876947699998, - 259.214486239, - 264.356771452, - 266.18867848799994, - 264.06887175500003, - 257.835124758, - 246.584232016, - 163.278190699, - 117.454688927, - 130.113434233, - 85.30424118020001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 11.9996187988, - 16.3029187988, - 76.7722308282, - 91.9284985046, - 178.780023589, - 196.739780684, - 239.378861134, - 240.67957350599997, - 239.292335627, - 234.980408698, - 228.177539716, - 173.512824709, - 112.64446102800001, - 16.4859766483, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 49.9500940344, - 82.08870040560001, - 147.58013913800002, - 225.92339019699997, - 251.35738066599998, - 276.504149146, - 290.19204679800004, - 296.986700519, - 297.43536526099996, - 294.547263578, - 283.41231358, - 266.115587829, - 194.908257108, - 180.33492737100002, - 170.841428332, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 49.9018440344, - 82.08648040560001, - 147.29554913800004, - 227.07301167900002, - 245.25250021600002, - 267.10127993799995, - 282.295911092, - 290.92954976199997, - 294.04029911099997, - 291.62529852500006, - 281.86571332799997, - 266.486378904, - 196.11970009600003, - 179.84412982199999, - 169.94208084, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 49.2751940344, - 80.29559040560001, - 130.755575081, - 243.28168196800002, - 270.54253596399997, - 282.065452834, - 286.91889618700003, - 288.716211025, - 294.32795909500004, - 289.947591904, - 278.977532191, - 261.344279907, - 190.19330752400003, - 176.564714672, - 166.737806111, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 49.880484034400006, - 82.14172040560001, - 147.23343913800002, - 235.34243003900002, - 267.39275041, - 283.974814321, - 291.21256908699996, - 296.326788679, - 293.255375953, - 285.68374957099996, - 274.834503208, - 260.71034066299995, - 192.08589455400002, - 177.29742440200002, - 167.16109362, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.198691883799995, - 81.83455040560001, - 147.63632913800004, - 229.927802385, - 252.28612867, - 268.647692172, - 278.65675863100006, - 284.736453856, - 286.68879407199995, - 283.543137187, - 271.932215365, - 252.750611485, - 181.02375052399998, - 169.387670459, - 153.666559551, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 51.9647898788, - 64.41943082819999, - 111.92791998310001, - 177.126154179, - 243.493085747, - 262.74413389, - 275.170682138, - 280.75409873800004, - 270.175500304, - 275.01646648, - 266.90134775600006, - 253.774536417, - 161.65472328799996, - 111.07855970499999, - 116.30817116600001, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.2357666483, - 16.9990087988, - 76.6145208282, - 88.66123082819999, - 151.129409561, - 157.939649561, - 197.35840871599999, - 198.38883871599998, - 196.010175604, - 190.880361747, - 182.417958317, - 135.855359561, - 87.1403604056, - 19.274344497799998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.4280022408, - 82.20974509189999, - 148.670099138, - 227.90603942799999, - 237.68014942799996, - 244.85086942799998, - 250.025011672, - 258.151692122, - 258.066430793, - 252.90339783000002, - 244.08399324500002, - 231.550776329, - 168.250394732, - 157.475970286, - 150.987757527, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.03971188379999, - 81.80481040560001, - 148.42326913800002, - 244.338697139, - 271.156301577, - 290.012727107, - 302.96857434599997, - 314.45581211200005, - 316.07886636700005, - 305.209096704, - 291.406994801, - 275.233358452, - 204.75732271599998, - 193.192094567, - 181.044227236, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.038071883799994, - 81.82481040560002, - 161.093827473, - 275.296414971, - 304.46641491800005, - 320.42244180899996, - 329.384258856, - 336.81509598400004, - 333.52823101399997, - 328.72007144199995, - 316.96663743600004, - 300.36038317900005, - 217.368174832, - 194.63592762000002, - 178.574507339, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 53.000711883799994, - 81.71993040560001, - 166.615418956, - 278.570314917, - 294.481514443, - 309.319143132, - 322.58260380900003, - 328.508570425, - 324.47757135300003, - 316.54497150199995, - 302.355849143, - 280.885870163, - 203.11696617599998, - 185.75680431, - 169.919176283, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 52.96412188379999, - 81.66007040560001, - 148.17150913800003, - 226.72744942799997, - 240.530873253, - 259.055642613, - 269.114226246, - 274.610269118, - 275.27916050100004, - 272.48047127, - 262.588832792, - 248.644164956, - 178.66009216700002, - 166.53420908299998, - 153.520969881, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 51.7754598788, - 63.965150828199995, - 112.5807899831, - 183.120878204, - 268.226724347, - 291.374195827, - 303.584094965, - 305.462760907, - 304.659823482, - 301.12452394599995, - 292.90897910599995, - 273.69237358800007, - 175.414602614, - 125.23547935399999, - 130.630793055, - 83.15965708750001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.011726648300002, - 15.7806387988, - 77.87867262, - 106.6640520441, - 186.67224696499997, - 198.58489229000003, - 243.173482621, - 249.487844356, - 249.55365372699998, - 244.909488853, - 237.555506944, - 177.311706366, - 113.533086541, - 18.746964497799997, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 52.9648918838, - 81.46843040560002, - 152.00647524299998, - 260.048803964, - 283.005572472, - 298.639274852, - 308.927033975, - 315.32174602900005, - 314.41236626100005, - 308.83333894400005, - 300.15256736599997, - 281.013973299, - 205.077543618, - 193.05575761199998, - 176.892321334, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 52.93093188379999, - 81.4053904056, - 149.360073001, - 258.254651001, - 278.99396611000003, - 291.462723518, - 312.0079605, - 316.73853220300003, - 310.08254039300004, - 298.018727887, - 286.54866167299997, - 266.587353242, - 189.889431244, - 180.57998332300002, - 165.45110018, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 52.8868718838, - 81.76310040560001, - 148.293929071, - 255.561082347, - 276.94829176900004, - 292.235848868, - 306.160963779, - 313.03140931, - 309.529688548, - 305.13177381, - 296.531401421, - 278.52868086, - 205.94097253400003, - 196.695191297, - 180.490409793, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 52.8611318838, - 81.70167040560001, - 150.48640356099997, - 256.056220395, - 283.92702449399997, - 303.537614837, - 313.5220834670001, - 316.81838790200004, - 313.93489683300004, - 308.18242131700003, - 298.20660368399996, - 280.424281006, - 210.52900934899998, - 202.533875104, - 185.334149497, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.348209733299996, - 81.59950040560001, - 149.763316649, - 256.34849709499997, - 280.641399963, - 299.325280133, - 308.570432594, - 312.564853333, - 311.684202444, - 309.52902979099997, - 293.883587605, - 276.069344063, - 203.624861468, - 192.71297422900003, - 176.597344488, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 55.11725772829999, - 63.67597082819999, - 111.5700499831, - 177.130468716, - 235.28582075600002, - 249.901333338, - 262.48939370299996, - 268.769268165, - 268.704188657, - 265.684616367, - 257.714263656, - 243.744028532, - 153.42519090700003, - 108.081982935, - 116.02065319, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 18.4312844978, - 15.861458798800001, - 76.7264808282, - 89.6098208282, - 148.50671956099998, - 159.11732956100002, - 197.542428926, - 214.634128716, - 219.502248065, - 215.339507462, - 205.939705696, - 148.216045026, - 86.64620756180001, - 21.5973523472, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.318059733300004, - 81.4357104056, - 147.95856913800003, - 226.67496942799997, - 235.950039428, - 245.31746406, - 266.732376434, - 279.140510864, - 277.959245497, - 271.714006722, - 262.020346577, - 245.532395029, - 171.97274114300004, - 164.212841262, - 152.03541145999998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.2759097333, - 81.33791040560001, - 147.45404913800002, - 226.071209428, - 237.635105091, - 251.861430689, - 260.909178081, - 269.758875169, - 277.69583829600003, - 279.481294757, - 268.863232531, - 252.093829288, - 180.31320548500003, - 174.003767083, - 158.175024337, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.2408297333, - 81.24357040560001, - 147.335189138, - 226.03810942799998, - 237.087780776, - 255.288318181, - 269.279250316, - 277.598994075, - 282.519843186, - 283.275226517, - 272.279561122, - 255.899078398, - 185.776778117, - 184.128682493, - 165.083756051, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.2469997333, - 81.48150040560002, - 147.880069138, - 228.551986102, - 252.46831223199996, - 272.493854807, - 288.07476383500006, - 296.887616285, - 293.6239113969999, - 286.46986766, - 275.547842777, - 259.502177481, - 187.754692302, - 184.52540086800002, - 168.28272071, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.209019733299996, - 81.35362040560001, - 147.44840689200004, - 246.483287709, - 270.185779318, - 290.98173979300003, - 302.55128093, - 308.54487276, - 310.57692340599993, - 301.480548577, - 283.19341638599997, - 262.285748721, - 191.32624115399997, - 188.558970118, - 171.177949662, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 54.93569772829999, - 63.54040082819999, - 110.92608998310001, - 185.36627506600001, - 268.23668144500004, - 291.7188517, - 300.308991782, - 303.604251851, - 294.29829516300003, - 288.32512513200004, - 279.768188508, - 264.520004447, - 168.518186963, - 127.83454626300001, - 128.394833444, - 82.9148814461, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 18.171034497799997, - 15.7662187988, - 75.2580808282, - 85.3682208282, - 157.89312011799998, - 178.72203142200001, - 217.801634316, - 218.70666405400002, - 219.62999274499998, - 190.60735867300002, - 186.018558943, - 154.15488344, - 99.3314902847, - 25.0236701967, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.1278297333, - 81.1840804056, - 146.26087652299998, - 247.83267592200002, - 273.802876906, - 291.37051782, - 302.06380189799995, - 308.59095942700003, - 304.806066424, - 297.42287606800005, - 283.232924608, - 264.43064509299995, - 192.45645884100003, - 188.321433914, - 169.412838815, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.1278297333, - 81.00302040560001, - 146.55834913800004, - 227.442562435, - 251.53472717800003, - 271.150718104, - 281.606020475, - 287.07810784000003, - 285.881979458, - 279.906688969, - 269.37807675700003, - 255.050795359, - 186.862780908, - 184.47743760199998, - 165.493670571, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.1278297333, - 81.00297040560001, - 146.385689138, - 223.74298942799996, - 237.24258875200002, - 255.641270234, - 264.99715682199997, - 269.98419281099996, - 274.161999396, - 262.608634388, - 253.010870485, - 250.707041066, - 184.045523882, - 181.390814536, - 163.897701876, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.1278297333, - 79.66235040560001, - 146.14677913800003, - 224.23427884499998, - 243.008765665, - 270.11282360399997, - 287.530701895, - 293.832723094, - 267.850566858, - 247.47705588800002, - 273.86805987800005, - 242.52799231, - 183.273337075, - 190.751060059, - 169.255548413, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.1278297333, - 81.18780040560002, - 145.605779138, - 230.612346119, - 255.330294852, - 273.252749951, - 282.805105714, - 288.361962636, - 287.23406740099995, - 275.921695236, - 265.942285676, - 256.846897127, - 186.040322502, - 182.821379241, - 156.013817929, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 58.3233655777, - 63.480840828199995, - 111.64464998310001, - 176.89794871599997, - 234.42821942799998, - 250.093227238, - 269.44806679199996, - 280.48206651799995, - 288.854547419, - 286.087592869, - 275.374470499, - 257.654943157, - 158.766212541, - 120.233295468, - 117.733098145, - 80.5349815685, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 15.439348798800001, - 76.3193108282, - 88.11391082819999, - 149.457639561, - 157.25430673, - 215.545189634, - 193.20656877, - 184.51312827200002, - 183.98957487600003, - 213.327386717, - 157.512963436, - 96.40477551080001, - 28.4499880461, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 15.338698798800001, - 75.7959908282, - 88.0230508282, - 150.558019561, - 156.949549561, - 200.558325275, - 206.9843085, - 177.30006150300002, - 174.419127386, - 164.44758651700005, - 136.195312963, - 83.8781690571, - 28.4499880461, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.28274040560001, - 146.650399138, - 224.62684942799999, - 233.86876942799998, - 241.626463863, - 252.94928488600002, - 267.116851221, - 270.828635749, - 264.26605428299996, - 254.40990933, - 240.79366914899998, - 174.47473733500001, - 177.75167588300002, - 153.747475318, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.09045040560001, - 146.26206913800002, - 224.25384942799997, - 237.13610080100003, - 260.004547204, - 270.82443507, - 279.924151575, - 283.014625559, - 279.54130426700004, - 251.42322760200003, - 254.745412962, - 181.011585606, - 188.146301537, - 167.826734614, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.0997004056, - 146.17647913800002, - 228.63125208900004, - 253.70150914799999, - 280.605137675, - 293.483688564, - 297.753787881, - 300.95156523699995, - 293.575875048, - 280.04411726399996, - 262.23818604099995, - 192.39503086899998, - 197.27075608, - 177.628941442, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.18680040560001, - 147.503058056, - 252.36526050799998, - 278.89651230000004, - 294.888853293, - 302.762327573, - 309.06472737, - 310.135684992, - 303.18066776599994, - 288.004465386, - 270.22409427400004, - 200.894358054, - 206.927175369, - 182.18364681300002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 58.3233655777, - 63.616630828199995, - 112.25568129299998, - 202.11999440800003, - 285.581023659, - 304.44294937, - 313.290684885, - 317.049119485, - 314.759719501, - 304.92493256200004, - 290.60726518099995, - 271.638594398, - 175.580022448, - 144.94240462800002, - 140.345969834, - 98.0484376025, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 15.722018798800002, - 77.27909136379999, - 100.98003054079999, - 186.494989444, - 209.366269553, - 258.279006918, - 261.102184557, - 260.627239615, - 251.42334058999998, - 234.24513189700002, - 173.19745609199998, - 107.02703113, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.36922040560002, - 147.28166536699996, - 236.829875516, - 273.22484769199997, - 296.624971497, - 302.780436241, - 303.61264993099996, - 301.19990261199996, - 295.374519009, - 283.83758058300003, - 263.445555686, - 187.75889587299997, - 195.39861634800002, - 173.321469885, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.1687004056, - 147.16208913800003, - 226.265170285, - 247.55894467299998, - 270.21041801900003, - 285.639482015, - 292.35877669499996, - 289.499295917, - 282.83258002, - 273.396533953, - 257.710584999, - 186.820089236, - 194.854800394, - 170.56654966, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.13259040560001, - 146.72335913800003, - 225.310609599, - 245.41447747, - 264.591045659, - 274.126463864, - 282.110832164, - 284.11860321600005, - 280.212825869, - 268.544417541, - 251.673825436, - 182.262663821, - 190.13673303, - 165.914838508, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.18649040560001, - 146.339959138, - 224.63224942799997, - 233.99697369299997, - 258.291978837, - 284.214940073, - 290.37723519499997, - 286.807781879, - 279.160854192, - 266.163018906, - 245.640609514, - 174.36648534000003, - 184.899454182, - 163.562893133, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.5541475828, - 81.36691040560001, - 145.773049138, - 223.78805942799997, - 238.019366163, - 255.209142247, - 260.539704349, - 261.223320599, - 262.750832206, - 260.99858815, - 250.817348747, - 238.092745325, - 177.441910568, - 185.488473929, - 163.35897374799998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 61.7496834272, - 63.8738808282, - 112.6117299831, - 179.875138716, - 238.93520942799998, - 251.42983295099998, - 258.921396461, - 261.942313371, - 260.835594951, - 254.91425164199998, - 244.88710583800002, - 229.967868105, - 150.881121281, - 121.546033664, - 116.464006474, - 80.0448304186, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 15.811628798800001, - 77.8602608282, - 92.11660082819999, - 156.431965521, - 170.665476093, - 225.716797094, - 235.949964336, - 235.543860979, - 227.677741081, - 215.878026149, - 152.772157297, - 91.23227194260001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.5367304056, - 148.38288913800002, - 228.31372942799996, - 239.45168353300002, - 252.393298502, - 259.453426716, - 261.139001115, - 258.748830463, - 252.280392084, - 241.89069720700002, - 227.343175399, - 166.601554051, - 176.410700254, - 152.162410293, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.40646040560001, - 147.72745913800003, - 226.776479428, - 236.40164942799998, - 242.54916942799997, - 247.639693482, - 257.734218732, - 258.612008693, - 253.16777552500002, - 243.99496062699998, - 229.683712935, - 169.12192947399998, - 180.033177695, - 153.99827208, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.3267804056, - 146.78538913800003, - 225.98365942799998, - 236.398829428, - 243.63854942799998, - 247.260629428, - 247.55210942799997, - 244.22570942799996, - 238.77678216499996, - 232.26178036600004, - 220.069913577, - 159.93025595600002, - 169.819311538, - 151.178592192, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.0261606101, - 81.4411204056, - 147.88253913800003, - 227.47532942799998, - 237.414019428, - 245.50385605900001, - 256.225034687, - 263.471003145, - 263.045429672, - 256.329695351, - 246.14726838599998, - 232.113213492, - 168.99899284399999, - 176.769279425, - 152.636231673, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.0249747072, - 81.29513863719998, - 147.165349138, - 226.072359428, - 236.143429428, - 250.141593021, - 267.435233196, - 272.60087272799996, - 270.750709393, - 265.092686387, - 254.70982791, - 239.198456501, - 178.469981525, - 184.169007475, - 160.817776863, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 61.7496834272, - 63.581330828199995, - 110.6404399831, - 178.97181757500002, - 253.71811961299997, - 274.989361661, - 290.862912787, - 299.72940590999997, - 299.79149369699996, - 293.725085171, - 283.65958714000004, - 265.65999551000004, - 173.355824748, - 138.143275244, - 133.964176464, - 88.9348344682, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 15.691278798799999, - 77.2192408282, - 98.5726699331, - 185.687468061, - 211.24072609200002, - 260.666532641, - 263.44980926899996, - 267.72677796199997, - 260.652129493, - 244.994750334, - 190.860081787, - 122.708148953, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.42587040560001, - 161.42138834099998, - 272.951286129, - 307.58244162500006, - 340.56173800600004, - 346.66623379600003, - 341.82264941999995, - 335.664403249, - 325.635604823, - 306.829148539, - 279.71374178499997, - 206.81215851900004, - 208.068703894, - 185.64117534599998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.36069040560001, - 157.244879403, - 267.483457977, - 290.269404819, - 308.59718660000004, - 326.155641094, - 333.114904788, - 326.29909796500004, - 320.733624753, - 306.18117929899995, - 279.340892324, - 206.89995129, - 209.18248175099998, - 186.043015931, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.1381204056, - 146.49982913800002, - 225.098149428, - 236.90629398, - 260.098107366, - 269.806575301, - 275.962173731, - 276.376215141, - 269.36501154, - 258.991714975, - 241.120007233, - 176.550486361, - 181.450163835, - 155.446193389, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 81.35191040560001, - 147.129979138, - 226.009199428, - 238.58762623500002, - 261.72559492100004, - 270.998995147, - 273.227453191, - 270.915034564, - 263.915092583, - 252.234869678, - 235.298346972, - 173.88730621699997, - 178.093387537, - 154.00316302299998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 62.98046543219999, - 80.49138040560001, - 145.07422913800002, - 220.44802942799998, - 235.85892942799998, - 243.551405593, - 256.588321582, - 264.12748778099996, - 252.18001504499998, - 236.01651707, - 250.06072597799997, - 233.20387216900002, - 174.77627242799997, - 179.37785151, - 154.294190983, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 61.7496834272, - 63.3296608282, - 110.73195998310001, - 176.258408716, - 233.86175942799997, - 236.77596805400003, - 240.38896953500003, - 248.788326646, - 250.144781511, - 241.96176022600002, - 233.183499571, - 219.594735738, - 150.549732583, - 116.097590294, - 115.357945526, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 15.287938798800003, - 75.3898508282, - 88.1925608282, - 146.907549561, - 153.718519561, - 187.54322871600002, - 172.320308716, - 178.54719871600003, - 165.888998716, - 166.907818716, - 115.590419561, - 87.355433954, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.63566990509999, - 81.1395168443, - 145.97393913800002, - 224.024509428, - 234.242366041, - 255.51574516800002, - 274.438032685, - 285.814965056, - 285.498428355, - 275.425315145, - 259.195672945, - 237.06244682300002, - 175.315634249, - 176.551206329, - 154.233420694, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4067832817, - 79.44369040560001, - 144.471749138, - 224.28872942799998, - 233.98993942799996, - 240.493189428, - 244.864076976, - 247.37026448199998, - 243.966498804, - 237.011084283, - 226.74555670900003, - 212.328905811, - 159.809412931, - 169.60365638, - 151.46535073799998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.5768522433, - 80.98775588890001, - 146.04726913800002, - 225.01235942799997, - 235.783434059, - 249.531234249, - 259.598886729, - 262.446153296, - 258.594363844, - 251.013990201, - 239.560258157, - 224.002833229, - 171.201570561, - 173.36903368199998, - 153.622255355, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4519072739, - 80.88082040560002, - 146.42082913800002, - 226.176500863, - 240.802910026, - 254.915012402, - 267.705787347, - 276.871685338, - 275.329456015, - 257.813422908, - 247.629662013, - 227.37863106599997, - 180.120587065, - 185.292640872, - 162.606942899, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4067832817, - 80.5165604056, - 133.699289138, - 210.367562846, - 250.68866627200003, - 260.004520681, - 300.62026091099995, - 306.68391323, - 266.770092014, - 271.66762663099996, - 278.95343119, - 240.902244584, - 192.361402078, - 192.84873672, - 166.778553579, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 65.1760012766, - 63.5526708282, - 112.2508199831, - 179.57274871599998, - 238.736034999, - 255.062891074, - 271.699955362, - 230.379029447, - 240.80123720699999, - 226.657443938, - 226.178482475, - 229.26097056700002, - 157.365395581, - 118.957347285, - 117.713483262, - 80.60374977929999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 15.4780187988, - 76.5423308282, - 90.5460808282, - 154.44432758000002, - 163.756501147, - 210.19025866799998, - 218.67607222300003, - 218.09866792699998, - 210.57994536, - 197.507299945, - 130.183029197, - 92.5905557596, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 15.3146987988, - 75.9724508282, - 89.59576082819999, - 153.63258136099998, - 175.262752078, - 224.014840746, - 220.65296517400003, - 215.98026357300003, - 205.832733484, - 190.216218615, - 126.653975049, - 90.857940986, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4067832817, - 81.01626040560001, - 146.77795913800003, - 225.978939428, - 239.823472117, - 256.218723534, - 258.708131814, - 258.82570807999997, - 255.905543691, - 249.37442506099998, - 238.83772821899998, - 222.94245535399997, - 172.193883197, - 172.330119026, - 153.998246767, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4067832817, - 80.8474604056, - 146.24678913800003, - 225.116109428, - 235.279919428, - 243.59589715100003, - 260.84482487, - 268.946565554, - 264.46863388500003, - 255.978275684, - 244.22832658599998, - 226.5051922, - 173.244800605, - 171.65634912000002, - 152.640104396, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4067832817, - 80.7437604056, - 146.12183913800004, - 225.41359942799997, - 235.805307799, - 246.359744315, - 256.814036707, - 260.726562968, - 258.36265607300004, - 251.370900532, - 239.88068657699998, - 223.40455369199998, - 175.40044015200002, - 173.340638219, - 154.115625559, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.4067832817, - 80.82856040560002, - 146.256679138, - 225.43112942799996, - 235.761914175, - 242.61850562100003, - 246.883017974, - 247.6776906, - 244.994509621, - 238.02819825900002, - 226.98128961100002, - 211.823127429, - 164.874722101, - 171.120106711, - 152.376694652, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 68.6023191261, - 63.07407082819999, - 110.77345998310001, - 176.936828716, - 234.953799428, - 240.63231942799996, - 242.71593942799998, - 244.10453206, - 248.70719783299998, - 243.298665222, - 232.892351069, - 217.53581047400002, - 148.697301145, - 115.49634512899999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 14.905928798800002, - 74.7933708282, - 87.1919308282, - 144.31362956100003, - 151.086239561, - 193.403878716, - 187.796818716, - 181.486008716, - 183.390288716, - 169.381268716, - 121.94348956099999, - 94.20806965290001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.9512472562, - 80.3579729879, - 144.300299138, - 222.83975942799998, - 232.91153942799997, - 239.03763942799998, - 243.20675618, - 244.73506790700003, - 244.975949753, - 239.196644209, - 227.865442587, - 211.923362867, - 168.084887712, - 170.08494646600002, - 151.897466353, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.123584253, - 80.4316244031, - 145.33667913800002, - 224.026859428, - 234.29618345000003, - 244.676948095, - 254.330342103, - 258.60650358500004, - 257.86353694300004, - 251.85546536800004, - 240.02744358700002, - 222.89375177999997, - 175.663577768, - 172.564299219, - 154.00964487500002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.83310113120001, - 80.4043204056, - 145.80049913800002, - 224.93922942799998, - 237.374663625, - 246.877744213, - 249.698805258, - 257.94766907, - 263.60814513, - 256.156569281, - 241.975523483, - 221.449402476, - 170.932583777, - 171.946066195, - 153.328241727, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.83310113120001, - 80.41638040560001, - 145.97229913800004, - 229.92739579699997, - 255.792806601, - 261.667749462, - 264.718923414, - 263.826422772, - 259.625755156, - 252.495078577, - 240.39126657900002, - 224.32092337900002, - 178.77743081699998, - 173.309140689, - 154.67514706600002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.83310113120001, - 80.1210604056, - 146.011605407, - 240.38778867, - 267.712946663, - 296.99120268699994, - 300.53767669, - 297.514790936, - 293.030951717, - 286.431267452, - 264.24438003299997, - 231.573132208, - 180.041193143, - 173.90315999499998, - 155.36426346800002, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 68.6023191261, - 62.12186082819999, - 110.04471998310001, - 176.305458716, - 234.67748942799997, - 240.80750942799997, - 243.40653942799997, - 242.52745676, - 251.074412183, - 251.99456073399998, - 239.56756251599998, - 220.262551336, - 149.481020513, - 115.381513985, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 13.852028798800001, - 74.420819475, - 87.5067808282, - 150.610349561, - 156.332179561, - 194.018718716, - 193.001728716, - 189.22310871599998, - 182.217694899, - 171.33137871600002, - 120.102049561, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.96274588520001, - 79.60715760859999, - 145.292033664, - 224.482229428, - 234.73400942799998, - 241.260279428, - 244.16377942799997, - 244.511483821, - 254.75843052000002, - 252.655268181, - 239.96869794499997, - 220.946271355, - 172.890876477, - 168.587904659, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.009829063, - 79.3891726258, - 145.197999138, - 224.42911942799998, - 234.43475942799998, - 240.70062942799998, - 244.343518374, - 246.413805305, - 248.564995084, - 244.18999339600003, - 232.26552130800002, - 215.631634359, - 172.219932514, - 170.274739591, - 152.007691751, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.0072888922, - 78.893180937, - 143.977189138, - 222.668589428, - 232.81528942799997, - 240.851424927, - 249.448152094, - 253.605730387, - 244.866180745, - 226.099619312, - 220.674056326, - 210.11656267799998, - 171.51776048099998, - 169.837872588, - 151.853574438, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.97085777000001, - 82.1537240625, - 143.89585913800002, - 222.68342942799998, - 233.26024942799998, - 239.93898942799999, - 242.930365287, - 242.886459445, - 239.269916025, - 230.515700627, - 218.19960601099996, - 203.12190576999998, - 169.91404649799998, - 169.805917913, - 151.615885253, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.3854923508, - 82.3852345438, - 144.21819913800005, - 223.86669942799998, - 235.05399942799997, - 244.60429893499997, - 252.837200069, - 253.454093435, - 249.283593444, - 241.50869526, - 228.58001110300003, - 210.597377414, - 171.497147801, - 170.53060463900002, - 151.881904481, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 69.12727279849999, - 65.00021368889999, - 110.34091957679999, - 177.59009871599997, - 236.62221942799997, - 243.33523942799997, - 247.12877117800002, - 247.967265956, - 244.423164885, - 236.49566875099998, - 224.377994387, - 207.23965160199998, - 152.70658983599998, - 115.70391593999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 16.417906648299997, - 74.8590311192, - 88.6953808282, - 152.614839561, - 159.921419339, - 205.01622759400001, - 209.61764706199997, - 205.400196697, - 193.444049274, - 177.76187105500003, - 121.929949612, - 97.63831956339999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.3106119435, - 82.29735805969999, - 145.116369138, - 224.586579428, - 236.083265174, - 257.096630201, - 276.769638151, - 285.035819592, - 286.61360079599996, - 282.881305876, - 263.29139649499996, - 235.240294828, - 187.85440626899998, - 181.883823438, - 158.51372840899998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.88910110249999, - 81.8717877291, - 144.86749913800003, - 224.290422347, - 240.843598184, - 265.530437928, - 281.22443976, - 289.96230793000007, - 271.396758112, - 265.23383827, - 241.980995243, - 222.259331967, - 181.486020301, - 173.903343234, - 153.02433753100001, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.8990998023, - 81.7905712654, - 144.546829138, - 223.922804718, - 237.28378514899998, - 263.557358823, - 266.022292688, - 265.381816501, - 261.81492059000004, - 254.60232916300004, - 242.47766039500002, - 221.628305037, - 176.704516295, - 171.37767475500002, - 152.88116227999998, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 69.92872631430001, - 81.63309447640002, - 144.242719138, - 223.64410942799998, - 234.87033942799997, - 236.03984525799999, - 227.09538725199997, - 221.35800616699998, - 242.711384664, - 224.97756105800002, - 220.027033739, - 207.096798588, - 170.482011034, - 169.389215938, - 150.876189156, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.5881472472, - 81.7422872772, - 143.77161281500003, - 223.199419428, - 233.94635942799997, - 240.912009328, - 244.98727214200002, - 245.81960524599998, - 242.58394821899998, - 234.92583803600002, - 222.671195793, - 208.75587662499998, - 171.221833205, - 169.922150884, - 151.357198363, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 69.1023640495, - 64.0594847072, - 109.6721183483, - 176.745628716, - 236.15565942799998, - 243.33309942799997, - 246.332009428, - 245.33931942799998, - 240.76399942799998, - 232.26699942799996, - 219.661159428, - 205.14345727699998, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9435045609, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.4952566483, - 74.2109630281, - 87.3062485857, - 151.216259561, - 158.130129561, - 196.440748716, - 195.54105871599998, - 191.05987871600001, - 183.02263871600002, - 170.208718716, - 120.73778741, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 57.638458800500004, - 90.6887237903, - 156.94009913800002, - 233.50810942799998, - 240.400689428, - 243.47051394699997, - 244.11235427999998, - 241.27074241799997, - 233.29513716099999, - 221.079429554, - 206.90601551599997, - 219.22265568, - 169.857476625, - 169.178864766, - 150.79597698, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 57.319019758399996, - 90.53448180279999, - 156.56143913800003, - 232.81106942799997, - 239.28110942799998, - 247.60071735299996, - 256.522499613, - 253.18638127199998, - 245.545203692, - 232.642381542, - 209.818447325, - 219.513533787, - 169.83029883999998, - 169.360577727, - 151.024874843, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.914439650199995, - 90.3057138714, - 156.156129138, - 232.032429428, - 238.92205304, - 249.28053844899998, - 254.84721184100002, - 251.174517797, - 243.21158332299999, - 230.78884741500002, - 215.037145148, - 220.905786517, - 170.662971471, - 169.766650712, - 151.694152392, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.915379544800004, - 90.0016434316, - 156.02404879800002, - 238.51162738399998, - 260.78113288000003, - 272.828684286, - 279.222189102, - 273.666900748, - 260.187995061, - 241.823894611, - 224.36802495400002, - 232.774019853, - 174.977792222, - 171.446330074, - 152.939777506, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.4725205711, - 89.6293004056, - 155.43373913800002, - 231.83654415299998, - 251.874474823, - 269.35871387, - 263.97264451, - 272.257308108, - 262.616449192, - 247.43017782799998, - 226.802480116, - 230.926469628, - 173.202919624, - 172.218047644, - 153.73290166, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 54.9551974171, - 72.1503908282, - 120.73889998310001, - 185.465787412, - 257.181130118, - 269.95059255999996, - 270.13158366100004, - 267.040899859, - 263.437356569, - 250.569534175, - 227.09371022000002, - 232.24722252299998, - 154.424121275, - 118.031625811, - 117.506107634, - 80.3364116499, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 18.171034497799997, - 21.9822987988, - 82.91105082819999, - 94.0111608282, - 154.90185956099998, - 157.908029561, - 192.682478716, - 176.303948716, - 179.545564517, - 166.928666357, - 155.51692409099996, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.58880349539999, - 87.8749789592, - 145.907919138, - 230.80613942799997, - 238.32057942799997, - 241.50255942799996, - 241.02682942799996, - 237.05270942799996, - 229.25958942799997, - 216.843839428, - 206.430735127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.7652937465, - 82.6254606922, - 146.15565913800003, - 230.98150942799998, - 237.97828232900002, - 235.92193593000002, - 238.87020141, - 237.379610034, - 233.784812173, - 222.90007537000002, - 209.114662959, - 219.62400217500002, - 170.53271117399999, - 169.43891061, - 150.940749445, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 56.956353165900005, - 78.7802429325, - 154.443809138, - 219.078239428, - 238.72542942799998, - 242.122969428, - 241.79693942799997, - 237.899509863, - 230.016270922, - 217.080949888, - 204.232447279, - 216.952387416, - 168.55294360000002, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 58.1075231296, - 89.844647573, - 155.955868448, - 232.32634086500002, - 239.04317956100002, - 242.352217576, - 241.61354301600002, - 237.04268942799996, - 229.03550899700002, - 216.358310599, - 205.962988026, - 217.179633282, - 168.99707058200002, - 168.97779117, - 151.284839882, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 61.214324398500004, - 90.66837092669999, - 157.148049497, - 234.77392942799997, - 242.246179428, - 245.31764942799998, - 244.36975942799998, - 239.94522942799998, - 231.59395942799998, - 218.083079428, - 206.23948512700002, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 59.145902437000004, - 71.6673894429, - 120.36410998310001, - 184.551698716, - 240.15073942799998, - 243.208064376, - 243.07084470200002, - 238.75376262199998, - 230.667366956, - 214.066404648, - 204.334295453, - 217.404627504, - 151.02089641900002, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 16.5857787988, - 76.34462456210001, - 95.49581082819999, - 145.98442956099998, - 150.864879561, - 171.10636871600002, - 164.897218716, - 155.18522871599998, - 164.66760871600002, - 155.258734414, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.2497903316, - 88.1618175138, - 143.379200254, - 230.285719428, - 225.76219942799997, - 227.89991942799998, - 208.08238942799997, - 237.09244523900003, - 229.337728287, - 216.43990233300002, - 205.565249902, - 217.257503008, - 168.77767391700002, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.0799069163, - 88.1630305246, - 154.19899913800003, - 233.38771255, - 259.2038438, - 269.277076988, - 271.73814423, - 270.952284378, - 251.581327268, - 236.288614496, - 227.419720185, - 233.054605605, - 175.465536418, - 172.642907076, - 154.018150095, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 59.575491187900006, - 87.6833304056, - 154.22077913800004, - 233.34775777500002, - 243.910369616, - 255.839628945, - 259.742287523, - 257.036052224, - 249.40984450899998, - 236.660366586, - 223.132134171, - 223.675506074, - 172.458072087, - 171.221855786, - 152.156044874, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 15.7191087988, - 75.5784208282, - 83.1738208282, - 153.41117956099998, - 156.95076956100002, - 191.922038716, - 187.927398716, - 179.912088716, - 160.934308716, - 155.262884414, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.471993278700005, - 88.4733811397, - 155.37861190499999, - 232.373879428, - 240.160199428, - 243.65068359500003, - 243.59968813, - 239.779272241, - 231.180215077, - 217.995615203, - 204.36110068899998, - 216.75021975899998, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 58.9608671368, - 64.1294159361, - 119.287348884, - 183.294802798, - 238.725459428, - 242.25976942799997, - 241.88660942799996, - 237.88745942799997, - 229.873369428, - 216.96687942799997, - 205.375425127, - 216.706946524, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 21.5973523472, - 15.6477587988, - 83.5062108282, - 93.8920608282, - 153.621369561, - 157.238719561, - 192.414418716, - 188.35181871600003, - 180.16932871600002, - 167.895708716, - 157.03824441400002, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 60.177014169500005, - 81.6999428245, - 153.829819138, - 230.23671328900002, - 239.263940022, - 249.800483386, - 259.167784716, - 259.827194777, - 253.683557933, - 241.26096589000002, - 225.21334202100002, - 229.509496485, - 173.340909712, - 171.072895935, - 151.715346393, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.8589395508, - 81.0502046531, - 144.41816913800002, - 219.87260942799998, - 229.76721942799998, - 229.980849823, - 229.199644837, - 234.631164928, - 227.937637018, - 216.33041761500002, - 206.074117173, - 217.569462338, - 168.597588932, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.4028736323, - 81.1083201083, - 144.979899138, - 229.03985942799997, - 236.82214942799996, - 242.088322883, - 244.792079663, - 241.870669346, - 233.593358526, - 221.11882355999998, - 209.308542079, - 219.181938621, - 169.432359631, - 168.56968848900001, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.30970058, - 86.378177952, - 152.76644913800004, - 229.642889428, - 237.208923623, - 243.34913298300003, - 243.87767651500002, - 239.875939433, - 231.54953023599998, - 207.31879951599998, - 205.86058409999998, - 217.9260735, - 168.86329233, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.0436862193, - 78.48784013119999, - 139.08204999599997, - 209.970169428, - 196.91733942799996, - 200.59742942799997, - 197.804159428, - 198.231199428, - 202.05327942799997, - 200.00030942799998, - 204.906765127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.7988953, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 63.2692404363, - 68.2561308687, - 117.0942456372, - 174.51650710899997, - 228.687849428, - 227.684879428, - 230.36734942799998, - 220.33516942799997, - 205.74770942799998, - 197.45098942799999, - 203.001675127, - 216.706946524, - 150.786658811, - 115.522935929, - 115.623962647, - 80.35011228980001, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 25.0236701967, - 13.7287187988, - 66.9453438575, - 66.1266910474, - 122.25883268899999, - 139.07478052200003, - 173.662930174, - 178.999166923, - 172.092847342, - 167.280770406, - 156.65752221900001, - 133.933229452, - 98.6349997115, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 65.08633296139999, - 85.98092097, - 131.367474811, - 229.59369475799997, - 217.98328942799998, - 223.49385942799998, - 226.52636942799998, - 210.31368942799998, - 196.490219428, - 215.924859428, - 203.303095127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.797835451, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.3072508739, - 85.35176909, - 153.07024204199996, - 230.93334942799999, - 239.40852428300002, - 249.66729437499998, - 253.524513594, - 244.31796001, - 234.735932375, - 220.00790218, - 208.308323172, - 217.121738483, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.6085891304, - 84.8532592765, - 152.220339138, - 229.184159428, - 236.718559428, - 240.95541495100002, - 232.37957393899998, - 237.475828171, - 218.964168541, - 211.21589777499997, - 208.571065447, - 217.225333288, - 168.98817268000002, - 168.640211285, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 63.6358553966, - 84.53773028760001, - 152.24131913800002, - 229.653589428, - 237.29739942799998, - 241.156849428, - 240.81861942799998, - 224.186579428, - 228.55368942799998, - 215.90261942799998, - 208.207252976, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 64.1057948287, - 84.79294771939999, - 152.688927138, - 230.20373942799998, - 238.411987646, - 243.294369668, - 243.49703127899997, - 239.445389385, - 231.048168973, - 217.834738657, - 209.701295242, - 217.90302774, - 169.32847182600003, - 168.5309635, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 66.2036203635, - 67.1555122799, - 117.5825932734, - 182.29356871599998, - 234.987079428, - 236.354139428, - 241.51629942799997, - 229.68139942799996, - 229.26845942799997, - 216.76623942799998, - 208.476512976, - 216.706946524, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 18.0213287988, - 81.1184542746, - 92.3518408282, - 153.552889561, - 157.935769561, - 193.776448716, - 162.995458716, - 158.138588716, - 168.022868716, - 159.96517226400002, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.346509155, - 33.392057242599996, - 33.3695262576, - 68.2914835058, - 84.6647990132, - 152.21813397199998, - 222.027475006, - 219.29289942799997, - 240.99233942799998, - 197.91743942799997, - 209.66937942799998, - 201.098379428, - 205.72842942799997, - 204.26461512699998, - 216.706946524, - 168.500818925, - 168.921224596, - 151.619856366, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.2503839361, - 33.264699195, - 33.8027606411, - 34.095540346300005, - 34.4217098373, - 68.95656775009999, - 85.1516192145, - 152.50161247600002, - 230.01496942799997, - 238.30407942799997, - 242.66149942799998, - 242.52606942799997, - 238.27325942799996, - 229.88104942799998, - 217.079429428, - 205.131425127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.3144229257, - 33.5815587627, - 34.0041479176, - 34.072259395399996, - 34.376078837, - 68.8762144113, - 84.78307552029999, - 152.385564738, - 229.961559428, - 238.26442942799997, - 242.31742942799997, - 242.04587942799998, - 238.06487942799998, - 229.75389942799998, - 217.03619942799997, - 205.307895127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.401671038399996, - 33.526202160900006, - 33.539112979, - 33.8001186573, - 34.1416222222, - 68.6781547491, - 83.9574547404, - 141.425494338, - 228.54201942799997, - 235.999979428, - 239.211439428, - 239.47816942799997, - 236.04973942799998, - 228.468559428, - 216.251449428, - 205.114045127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.2162920253, - 33.3363472554, - 68.1781353352, - 83.07710048460001, - 142.327699138, - 228.735229428, - 225.86676942799997, - 226.83800988599998, - 225.523465589, - 201.342414006, - 220.248373174, - 216.78792234999997, - 203.585265389, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 66.5327447411, - 65.8717886982, - 116.4159568814, - 181.587828716, - 238.48190942799997, - 243.51970369499998, - 244.767878659, - 240.862895967, - 232.484129314, - 219.574874299, - 207.390563184, - 217.299449058, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 28.4499880461, - 17.2408987988, - 80.89162082819999, - 92.45071082820002, - 154.863484062, - 162.634265095, - 204.302606358, - 197.78707906100001, - 190.863990706, - 181.20672866200002, - 160.587686679, - 134.407984272, - 98.11667474869999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.4926085616, - 81.6755111783, - 134.866189138, - 227.880370657, - 234.104560081, - 254.182153164, - 275.088475898, - 270.7009831, - 256.720184917, - 237.490693604, - 219.15704451, - 220.74618134899998, - 171.487835572, - 170.530549526, - 152.061209479, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 67.1381684582, - 82.65239857590001, - 151.51001913800002, - 230.08731671100003, - 251.304170916, - 274.426813936, - 277.740893164, - 271.35359450199996, - 258.72821821800005, - 243.019955197, - 225.320620627, - 229.639300792, - 175.027679269, - 173.267111776, - 154.605506693, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.5574719854, - 82.3008204056, - 150.83161913800004, - 229.499564601, - 250.16815366900002, - 270.708005967, - 283.238144001, - 280.005972027, - 264.769634887, - 247.429159928, - 222.69797051299997, - 221.588052683, - 171.721629148, - 170.467264839, - 151.877494568, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.76227187479999, - 79.1553590427, - 140.833159138, - 215.48975879999998, - 243.861175352, - 270.973629929, - 260.152368974, - 263.692335382, - 255.46911128300002, - 239.33370527099999, - 216.379939986, - 220.95895033399998, - 171.645244213, - 170.80300186300002, - 152.122239918, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 66.961547701, - 81.8491374736, - 149.66646913800002, - 228.135892586, - 241.02444092699997, - 239.644128333, - 250.82779232399997, - 247.30910767999998, - 239.57075063700003, - 227.4730421, - 212.685107381, - 219.97761011400002, - 170.185698645, - 169.240674484, - 150.87909960300001, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 66.1918194813, - 64.6359119068, - 114.7560224284, - 179.454708716, - 236.153384341, - 241.41018121899998, - 241.71538248299998, - 221.361083824, - 225.48472035999998, - 205.315621338, - 204.849065516, - 217.670389171, - 150.775396235, - 115.34805707999999, - 115.34805707999999, - 79.9207179249, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 15.8695887988, - 79.2182490599, - 90.83879082819999, - 152.081081033, - 157.974748189, - 194.640869582, - 189.704361234, - 177.654557873, - 168.788508716, - 155.64991441400002, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.77559417169999, - 83.20146038330002, - 151.642940508, - 229.506999428, - 238.853863813, - 256.095800482, - 263.335949991, - 246.096710621, - 232.32599017399997, - 214.43672514800002, - 205.74651895, - 217.829547982, - 169.216481009, - 168.543561939, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 16.1897387988, - 80.62901853559998, - 92.3255508282, - 155.003637362, - 155.94485634, - 207.17649111599997, - 214.84058179000002, - 203.664242159, - 183.881676523, - 162.906132114, - 133.079947242, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.9102656636, - 82.2863245655, - 150.298378094, - 227.49638942799996, - 226.86991942799997, - 230.08132942799998, - 228.06394942799997, - 222.937479428, - 216.492919428, - 205.85311942799999, - 203.43005512699997, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.0642269696, - 79.07094481419999, - 137.02852165199997, - 206.07574942799997, - 216.00933942799998, - 226.83547942799999, - 231.95139942799997, - 221.13289942799997, - 209.74521942799998, - 217.45224942799996, - 204.192935127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 71.13484557039999, - 78.3185619394, - 143.352165699, - 219.168309428, - 216.150489428, - 206.09630942799998, - 205.399059428, - 198.83371942799997, - 202.48385942799996, - 201.77026942799998, - 203.240435127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.775396235, - 60.9083742719, - 33.107087900699995, - 33.107087900699995, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 69.84820696710001, - 61.1576854134, - 95.5366401973, - 157.80266004400002, - 201.36617942799998, - 203.95420942799996, - 199.21152942799998, - 203.55445968499998, - 222.622015705, - 200.47506645800001, - 206.524565127, - 216.706946524, - 150.775396235, - 115.34805707999999, - 115.414618495, - 80.18184590189999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 14.934278798800001, - 62.8740335445, - 72.824982439, - 115.801119561, - 122.110629561, - 157.706428716, - 156.261508716, - 153.825328716, - 153.534988716, - 155.097074414, - 133.061726657, - 97.63438750239999, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 31.876305895599998, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 33.107087900699995, - 70.6639834548, - 81.2630978375, - 148.63070680099997, - 226.36635028499998, - 235.57377942799997, - 240.230719428, - 229.495499428, - 225.33304942799998, - 230.49557942799999, - 212.03564942799997, - 208.766635127, - 216.706946524, - 168.489065812, - 168.489065812, - 150.790891642, - 60.9083742719, - 33.107087900699995, - 33.107087900699995 - ], - "critical_load_series_kw": [ - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.0825779467, - 16.1940740764, - 16.3792709196, - 16.36236526635, - 5.8159841199999995, - 30.4454442535, - 29.948087641, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 75.67873828249999, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.93463043525, - 39.144601623499995, - 65.2503425405, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.244532906, - 84.2459556135, - 75.425857705, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.7737453346, - 39.133430126049994, - 65.52504359250001, - 98.244702057, - 98.08727139, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.258767659, - 84.3606472095, - 75.54641717, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.8289266807, - 39.1525388612, - 65.4387355805, - 98.0766909895, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.7032525087, - 39.13324098535, - 65.73176077400001, - 98.6273313215, - 98.5803765585, - 98.5217491685, - 98.5224687115, - 98.5364321545, - 98.536721342, - 98.3879792935, - 100.0259452265, - 108.680057484, - 84.6323553725, - 84.696616961, - 75.87522944749999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 16.06619674345, - 16.4401459875, - 16.42034179565, - 16.5319430043, - 35.5986135471, - 30.8088586586, - 47.996797263800005, - 74.0402767375, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 75.3876981175, - 57.674028539999995, - 57.684197782999995, - 40.10646857055, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.0157476851, - 16.030614242, - 16.0572089538, - 5.697231791, - 30.045383660949998, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 75.67873828249999, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.793373751, - 39.14933736705, - 65.4495116485, - 98.08212518399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.80861916715, - 39.017204696200004, - 65.1718288305, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.6494164684, - 38.94465598535, - 65.144496535, - 98.07451971399999, - 98.0822480495, - 98.41418898399999, - 98.7151813425, - 98.676603145, - 98.6810024995, - 98.681689083, - 100.22670647749999, - 108.37881044100001, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.58504826065, - 39.0096579653, - 65.33071794199999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.57246591345, - 38.88007140075, - 65.1237501025, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.93611638135, - 30.0042599661, - 47.4168087889, - 73.965579358, - 98.07451971399999, - 98.484086617, - 99.896680656, - 101.850011469, - 103.0826315105, - 101.177759614, - 99.80134404750001, - 108.980054612, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.3249371345, - 58.079079978500005, - 76.41081332350001, - 76.256148506, - 76.25560495549999, - 76.0934708835, - 74.99023676, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 30.08682480305, - 29.69035465255, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 66.5308633285, - 48.8279426668, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 36.0276125896, - 39.200030410000004, - 65.2527652505, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 108.353473262, - 84.244532906, - 84.244532906, - 75.392416238, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 36.05644885275, - 39.342321552650006, - 65.7206993975, - 98.559464615, - 98.559205739, - 98.33126073, - 98.2877148765, - 98.3097371195, - 98.3615093635, - 98.372864253, - 98.4283925325, - 108.8239585915, - 84.7904081745, - 84.8047097815, - 75.90711537600001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.57422693465, - 16.57898958425, - 16.6080614608, - 36.2021079645, - 39.2880445205, - 65.260379016, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.67504943475, - 38.89988518965, - 65.12451180949999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.9710777979, - 16.10178004525, - 16.1326024643, - 16.152001938799998, - 35.3153079417, - 30.28601806375, - 47.5725971765, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 108.353473262, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.9845509273, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.09308223645, - 16.205957639999998, - 16.28593611605, - 16.415423073750002, - 5.931463814, - 30.1729329521, - 29.68818033495, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.622126355949998, - 16.553543950349997, - 35.8657489497, - 39.13145512685, - 65.2196297, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.62602431165, - 16.636828804500002, - 35.8115790579, - 39.04652165185, - 65.2027517455, - 98.07451971399999, - 98.07451971399999, - 98.1018454865, - 98.2329326805, - 98.225058757, - 98.23074081349999, - 98.227244665, - 98.220534113, - 108.3605367575, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.76813046775, - 38.8518314275, - 65.10874456900001, - 98.07451971399999, - 99.102700913, - 100.49345672199999, - 100.3190243075, - 104.961138758, - 108.712375115, - 107.2212460555, - 102.4426518805, - 108.2068983375, - 85.303369421, - 85.247404257, - 76.3916161165, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.50356531845, - 38.6383230115, - 65.10874456900001, - 98.07451971399999, - 99.03420573349999, - 105.994454397, - 112.12772770950001, - 115.5460249655, - 117.8097664995, - 118.3157915685, - 114.61594689649999, - 117.672513899, - 90.1234317925, - 85.8485134225, - 76.414337214, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.26244490135, - 38.5435328082, - 65.10874456900001, - 98.12839789399999, - 101.9768567665, - 109.30702717800001, - 115.797920811, - 120.55840448750001, - 120.18231262, - 114.024602098, - 106.36261798, - 112.312113923, - 89.94162105, - 86.9262679015, - 76.56327491, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 32.69633070685, - 29.71778223215, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 102.9431003075, - 112.213818456, - 113.129633114, - 110.564747535, - 106.2688053445, - 100.927779559, - 107.684346612, - 75.50069591500001, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 29.75501205395, - 29.6814054141, - 56.277154749000005, - 57.5316308305, - 75.73599943149999, - 75.72346821299999, - 75.702877039, - 75.23963964449999, - 74.5806606025, - 64.817704404, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.77251288715, - 38.86041186415, - 65.1401928685, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 106.6403143375, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.00752682465, - 39.03969494675, - 65.344951919, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 106.6403143375, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.0669362397, - 39.08994822935, - 65.4178807665, - 98.081606894, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 106.6403143375, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.79483765455, - 38.9582250467, - 65.365875693, - 98.1176908675, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 106.6403143375, - 84.244532906, - 84.244532906, - 75.41451564, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.8648353716, - 38.9932845652, - 65.4124149925, - 98.205875721, - 98.0872745625, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 106.6403143375, - 84.3019628105, - 84.4020390965, - 75.62017386400001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.003226943650002, - 33.82339635555, - 30.40652977085, - 47.5884316693, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 104.927155413, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.974537339649999, - 14.33389988365, - 5.7636614557999994, - 30.09603338595, - 29.6915831959, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 63.10454547900001, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.063895478700005, - 38.99877963805, - 65.25398926849999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 104.927155413, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.85370309525, - 38.99961352365, - 65.3742951265, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 104.927155413, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.961788867799996, - 39.0103906644, - 65.2676472455, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 104.927155413, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.0097782284, - 38.9176217682, - 65.392000716, - 98.1764522985, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 104.927155413, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.406229639500005, - 39.1807677567, - 65.30615338749999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.50511811700001, - 99.93492709, - 100.323427327, - 99.89326239149999, - 105.715254201, - 84.3159407825, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 31.409527547600003, - 29.86456387985, - 47.395074991550004, - 74.009958864, - 102.2614060815, - 107.68623964199999, - 107.38768409849999, - 107.257512324, - 107.21726776999999, - 107.043520781, - 106.15184967649999, - 109.3470595985, - 76.505554181, - 58.0620030795, - 57.771072617, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 29.68157749985, - 29.6814054141, - 56.387758264999995, - 56.8663631285, - 75.3052176715, - 76.337036001, - 77.617099907, - 78.1841646625, - 77.19246588749999, - 64.193983108, - 48.841956917299996, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.72014607755, - 38.56333167815, - 65.10874456900001, - 101.31546794650001, - 108.67704792800001, - 114.570592078, - 119.6953879875, - 123.76539824900001, - 120.8625042015, - 117.8501001665, - 112.8659600795, - 112.4535447055, - 86.00407892850001, - 85.4208818675, - 76.210518069, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.69433838085, - 38.55758386465, - 65.10874456900001, - 98.46200540599999, - 104.7878013635, - 113.8479107225, - 112.661012328, - 110.62469788, - 110.5692181135, - 110.0599928795, - 108.207342968, - 107.82749134800001, - 85.795846215, - 85.2384394855, - 75.9498439935, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.7683217976, - 38.627071481899996, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.3166363135, - 98.704372847, - 98.685733684, - 98.6474697015, - 98.587141701, - 103.557016222, - 84.317359627, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.77875820095, - 38.7520692947, - 65.19417269350001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.0803201619, - 38.9238544249, - 65.32241882299999, - 98.10096803600001, - 98.07451971399999, - 98.1099485585, - 98.16790913550001, - 98.183795389, - 98.128775144, - 98.14318587, - 98.2381379585, - 103.40922031999999, - 84.47329634, - 84.5364651375, - 75.7103515275, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 32.0297434838, - 30.439978275399998, - 47.81290057175, - 73.98425708900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 75.3876981175, - 57.674028539999995, - 57.678596153499996, - 40.0606098906, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 30.0821584746, - 29.74040143045, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 61.391386554499995, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 30.3433534517, - 30.055558625899998, - 56.452568955000004, - 56.543683924, - 74.273772199, - 74.0816883225, - 73.965579358, - 73.965579358, - 73.965579358, - 61.41064672899999, - 48.95025825355, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.597227067, - 16.86142088345, - 16.95276079085, - 31.04917794345, - 39.32514993065, - 65.361963559, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.7035501998, - 16.73312733725, - 30.8322173642, - 39.0472604349, - 65.1741034485, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.53462322765, - 38.97310648845, - 65.230709216, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.54921717395, - 38.8935430045, - 65.2480167455, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 29.92588499115, - 30.031432651, - 47.413589192799996, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.851854803, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.96810369299999, - 73.974135278, - 73.969446158, - 59.6782276295, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.5149274853, - 38.9054884566, - 65.152893856, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.58928989345, - 16.6712117219, - 29.014368063600003, - 38.9879468675, - 65.149562117, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.62608151605, - 29.021088645149998, - 39.10303874525, - 65.28393804650001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.0128575079, - 39.026534117900006, - 65.178799505, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.4750300706, - 38.809745577399994, - 65.197016767, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 28.0223609547, - 29.9175153636, - 47.40827822835, - 73.965579358, - 98.07451971399999, - 98.2979970045, - 99.784810022, - 106.800088075, - 109.18490448, - 105.790830107, - 103.4169707915, - 102.992785225, - 75.642756823, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 9.085517248899999, - 5.6591993994, - 29.74549684475, - 29.6814054141, - 56.703132699499996, - 60.994708945, - 85.008084238, - 84.48079325650001, - 84.26080761, - 84.1544003205, - 79.83234800550001, - 59.922803639, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.254090965150002, - 38.741919199950004, - 65.2686842935, - 98.1483184095, - 98.088164725, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.549023597, - 84.38970073899999, - 84.47456168800001, - 75.65605656999999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.8926355969, - 39.1859586324, - 65.5188762695, - 98.143165576, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.25666808849999, - 75.451234652, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.957832926650003, - 38.9207132366, - 65.317285544, - 98.097520554, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.84150755835, - 38.7268796795, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.6298624113, - 38.7182278429, - 65.17079464, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 26.22626591605, - 29.95655610885, - 47.540186799800004, - 73.9676873955, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 30.0456155229, - 29.7215369688, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 40.25139912755, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.2901045464, - 40.525427091400005, - 65.2632722925, - 98.0769185905, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 75.67873828249999, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.5568600344, - 40.697975590599995, - 65.378890203, - 98.1218256545, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 75.67873828249999, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.5281429471, - 40.67123797285, - 65.316404577, - 98.094495588, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 75.67873828249999, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.882804682599996, - 39.2413309782, - 65.5205912515, - 98.1212663485, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 75.67873828249999, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.874901270600006, - 39.2144245229, - 65.4506732905, - 98.0856400025, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 75.67873828249999, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.9812058788, - 30.2052614192, - 47.63853367615, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 66.821903494, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 30.0620452643, - 29.772577769199998, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 40.25139912755, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.716105598149994, - 39.0937862095, - 65.39172703, - 98.0816496265, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 75.67873828249999, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.85797168855, - 39.21343614665, - 65.508932277, - 98.1322463035, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.6939922987, - 39.106060531900006, - 65.5376964565, - 98.2354629665, - 98.28879297900001, - 98.3757997715, - 98.4060945505, - 98.2430134895, - 98.07451971399999, - 98.07451971399999, - 98.2617152675, - 98.359952571, - 74.2162483265, - 84.6214401975, - 75.83794524049999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.6161109316, - 16.80385561, - 16.900189342450002, - 17.0894780326, - 17.18735530235, - 34.500845624899995, - 39.6778908178, - 65.8190149585, - 98.303260816, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.108211023100004, - 39.19945496745, - 65.465470873, - 98.1024730355, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 84.244532906, - 75.4043754665, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 33.42202249885, - 30.3038349218, - 47.78403443285, - 74.00577666950001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 65.10874456900001, - 57.674028539999995, - 57.674028539999995, - 39.9776715248, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 30.26606783315, - 29.743317767649998, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 74.0091549725, - 74.1003288045, - 74.1015272545, - 56.2519097805, - 38.538240202800004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.81322979065, - 38.9283390146, - 65.2449435765, - 98.07451971399999, - 98.201276773, - 100.2474496705, - 101.652857185, - 101.97067619, - 102.00452934799999, - 101.888690317, - 101.719283735, - 99.64102364050001, - 74.60950773249999, - 84.3163050885, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.7714846699, - 38.93409074305, - 65.346225398, - 98.083388106, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.7719505527, - 38.9428514243, - 65.263488485, - 98.07451971399999, - 98.07451971399999, - 99.08005053000001, - 104.90299253299999, - 106.2951802945, - 106.111169697, - 105.7534371105, - 102.310797865, - 99.6286412275, - 74.528792058, - 84.2919453025, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.7459353924, - 38.89293327575, - 65.18833862049999, - 98.07451971399999, - 98.091547128, - 101.4212421215, - 105.301703399, - 106.438027196, - 106.906674753, - 107.089153173, - 106.55631514950001, - 104.5557858225, - 76.033840651, - 85.00755424649999, - 75.8078738905, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.738759888049998, - 38.695693064349996, - 65.1137508905, - 98.07451971399999, - 98.373480019, - 104.17638291050001, - 112.0000967885, - 115.9307951655, - 115.167594537, - 111.7266678255, - 108.3912424595, - 105.6894239765, - 76.37602321300001, - 84.797570387, - 75.569770888, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 31.196115925300003, - 29.83895122005, - 47.396433216750005, - 73.97834893, - 103.862532371, - 111.8843373035, - 114.848854532, - 114.33741903149999, - 115.4735995335, - 117.5176985225, - 115.899542938, - 110.600640419, - 68.16186093399999, - 58.0223442855, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 29.9703804, - 29.7410299124, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.22035429725, - 39.058624137, - 65.41002795499999, - 98.1000492985, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 82.5313739815, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.218769849050005, - 39.025893668749994, - 65.3598359285, - 98.0825393955, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 82.5313739815, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.1781430978, - 38.992153010150005, - 65.308225655, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 82.5313739815, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.15163269125, - 38.9766922229, - 65.3506875785, - 98.086511172, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 82.5313739815, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.3051944862, - 38.8963122588, - 65.2511521695, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 82.5313739815, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 29.59059362355, - 29.977751991999998, - 47.4956488567, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.1326844555, - 98.253096204, - 98.24533985299999, - 65.23754952300001, - 55.9967731575, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.73717154105, - 29.6814054141, - 57.400733757, - 63.555959166, - 85.3892346655, - 84.66240955800001, - 84.54998130899999, - 84.77077988100001, - 84.0992064685, - 60.752022205500005, - 39.2549343904, - 14.22499402305, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.006203894400002, - 38.6792463663, - 65.11742348749999, - 98.07451971399999, - 98.5719937105, - 100.615668165, - 100.564999469, - 100.515721814, - 100.5242584085, - 100.453209724, - 100.386047686, - 100.3160942505, - 74.82932031450001, - 82.86647974399999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.154258203, - 38.774642119949995, - 65.1661872405, - 98.07451971399999, - 98.07451971399999, - 98.769939488, - 100.97542737549999, - 99.794988612, - 99.81627336550001, - 99.8481498835, - 99.755589792, - 99.628686728, - 74.98569662099999, - 82.97013608450001, - 75.447970438, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.0859772802, - 38.74259781735, - 65.161837699, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.1829267285, - 108.31570781699999, - 113.132840591, - 122.20611606700001, - 126.77019099299999, - 97.8240336675, - 99.0090056835, - 85.966380652, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.8163008652, - 38.5473539508, - 65.10874456900001, - 99.6699328575, - 107.4967236595, - 112.8577478425, - 116.498263894, - 119.0662659385, - 117.9337545855, - 116.570822426, - 115.7777316775, - 112.69819825200001, - 84.1442926765, - 87.4325722595, - 76.11028948500001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.9844685124, - 38.64628622495, - 65.10874456900001, - 98.2896532875, - 105.214588052, - 112.7052671065, - 118.764563376, - 119.2667743785, - 116.571411585, - 113.6959118035, - 111.050585562, - 108.572857128, - 80.218289226, - 83.6385196615, - 75.7869844955, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 27.766196797950002, - 29.87146968385, - 47.4224870858, - 73.965579358, - 98.07451971399999, - 98.1910002095, - 98.449861798, - 98.44750059750001, - 98.4606926085, - 98.475484298, - 98.4592485795, - 98.44565389200001, - 65.4143694755, - 55.9864205155, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 9.085517248899999, - 5.6591993994, - 29.8536628029, - 29.683557641, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.9881702645, - 74.10245446249999, - 74.09985808350001, - 74.093550845, - 56.291121193, - 38.538240202800004, - 14.22499402305, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.37649750205, - 38.688605235850005, - 65.11368382549999, - 98.07451971399999, - 98.07451971399999, - 99.027266536, - 102.3699263665, - 103.486044883, - 103.670547322, - 104.3982462965, - 104.5091683105, - 104.547451092, - 78.333325131, - 81.56556923999999, - 75.782242934, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.362804532349998, - 38.706166010749996, - 65.12999856399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 80.81821505650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.43302460845, - 38.7792078132, - 65.180315173, - 98.07451971399999, - 98.07451971399999, - 98.07541311199999, - 98.0799822735, - 98.0800445175, - 98.0797548875, - 98.0794844955, - 98.085165414, - 98.089021464, - 73.972575285, - 80.8193637845, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.43945235235, - 38.7561919068, - 65.1409910565, - 98.07451971399999, - 98.07451971399999, - 98.147678406, - 98.91951918950001, - 99.83651969649999, - 99.82913775600001, - 99.81934135099999, - 99.7706321095, - 99.687567701, - 74.68196364500001, - 81.18023436249999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.31848686665, - 38.715952223799995, - 65.1726954815, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 80.81821505650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 27.8789508453, - 29.9587233498, - 47.55333931545, - 73.968611831, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 65.10874456900001, - 54.2477106905, - 57.696065312, - 40.08440521925, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 5.6591993994, - 30.291508921149997, - 29.97024752715, - 56.368615534499995, - 56.516424005, - 74.1090291735, - 74.0755285615, - 74.0581831785, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.549083287849996, - 12.51183509835, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 27.4327187321, - 39.289454041300004, - 65.59513661449999, - 98.4908639695, - 98.4325366325, - 98.411894961, - 98.37822704749999, - 98.15379797099999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 74.01529572449999, - 80.9966867315, - 75.61964372349999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 27.44881694895, - 39.253230050300004, - 65.543318723, - 98.22877416200001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 80.81821505650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.98001427705, - 38.92502733415, - 65.285341212, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 80.81821505650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.780440215149998, - 38.82899404465, - 65.2773053045, - 98.1017682725, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 80.81821505650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.806280874, - 38.8043976762, - 65.223398863, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 80.81821505650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 26.095837045350002, - 29.915427358400002, - 47.519684413149996, - 73.96741295599999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.0808050295, - 65.263463118, - 54.455333335999995, - 57.885566324500004, - 40.239202856300004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 5.6591993994, - 30.2745937995, - 29.962516198899998, - 56.344493272, - 56.267772427000004, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 10.7986761736, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.817335614250002, - 38.94321656265, - 65.4309433115, - 98.229232273, - 98.1532929725, - 98.1667552745, - 98.1322353925, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.9712563835, - 79.16829470949999, - 75.4893785995, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 25.285536312599998, - 38.93723850365, - 65.2867743205, - 98.07628759, - 98.07451971399999, - 98.07451971399999, - 98.07608173099999, - 99.3772359005, - 100.97224349950001, - 103.5654563195, - 104.4670398935, - 104.2443513445, - 76.805748665, - 79.3005070185, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 25.0526140179, - 38.7669257163, - 65.15906666699999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.889705605, - 100.34668015000001, - 100.2601201925, - 100.14560295, - 74.228437207, - 79.1220970255, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.966954213749997, - 38.7251824636, - 65.13824255850001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 79.105056132, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.914231115350002, - 38.718921743799996, - 65.160539479, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 79.105056132, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 24.346634564600002, - 29.88478424175, - 47.443859023899996, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 65.10874456900001, - 52.5345517655, - 57.674028539999995, - 39.9707962686, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 5.6591993994, - 29.94468893035, - 29.75160823545, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 10.7986761736, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 25.20772197395, - 38.9113722418, - 65.2838871885, - 98.0782257885, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 79.105056132, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 25.10291610475, - 38.7388799874, - 65.1471903975, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 79.105056132, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 25.04683534885, - 38.73972842015, - 65.13433865900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07762824950001, - 98.4125936195, - 99.45013972950001, - 99.4176533365, - 99.3670331575, - 75.178842675, - 79.105056132, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 25.0315557433, - 38.748044128349996, - 65.152582342, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 100.112942657, - 103.1146375065, - 103.8031531255, - 103.977460202, - 104.0422972345, - 103.789045147, - 77.059183299, - 79.53550376349999, - 75.3958640065, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.9284872994, - 38.669260672, - 65.109604998, - 98.07451971399999, - 98.07451971399999, - 98.914075521, - 104.0672690395, - 106.425246153, - 106.543297326, - 107.4108553025, - 107.2972392715, - 106.87976042849999, - 80.991220238, - 80.66153840999999, - 75.69344206950001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 24.2217299462, - 29.8109096282, - 47.4013739491, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.090171598, - 103.9802415205, - 108.915255669, - 109.82659624, - 109.775747387, - 109.492552462, - 72.3325014055, - 51.914299741499995, - 57.7921588245, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 29.75328453865, - 29.68226584285, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 74.0003858195, - 74.1052306435, - 74.10334893150001, - 56.360061197, - 38.538240202800004, - 9.085517248899999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.8947739529, - 38.69713367145, - 65.12364314300001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.8733779975, - 100.879678374, - 101.122568307, - 101.2416498085, - 101.3060311095, - 77.470243111, - 77.7773229635, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.84427306625, - 38.668243996950004, - 65.114800169, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.18095215950001, - 99.24662956, - 99.90963179799999, - 99.823073683, - 99.012067172, - 74.1656818915, - 77.3944474045, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.7906637734, - 38.58950744415, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.14365330999999, - 99.080680031, - 99.4961074835, - 99.4420439875, - 98.8686590675, - 74.13559627000001, - 77.399602915, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.82955535745, - 38.6512692668, - 65.11283657950001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.86233753100001, - 99.1306435645, - 99.0856345875, - 73.977917282, - 77.391897207, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.90641325095, - 38.6996055478, - 65.1374590735, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.080119521, - 98.08777506950001, - 98.0798573645, - 73.965579358, - 77.391897207, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 24.450311084400003, - 29.9549299947, - 47.5421516201, - 73.972313067, - 98.13752248200001, - 98.09615560099999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 65.10874456900001, - 50.821392841, - 57.6776660885, - 40.0692348465, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 30.078942502, - 29.8210970983, - 56.25805029, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 9.085517248899999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 25.228991535, - 38.86566018155, - 65.2204601305, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 77.391897207, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 25.12755620965, - 38.792096295250005, - 65.1724004675, - 98.07451971399999, - 98.07451971399999, - 98.1167133315, - 99.5227166835, - 102.274793634, - 103.795954722, - 104.020673047, - 104.01104692, - 103.83659178100001, - 79.3118353685, - 78.4945888445, - 75.4054076095, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.851134248599998, - 38.6359764814, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.8409518985, - 102.92317837899999, - 104.9665383385, - 105.0344405235, - 105.09294939850001, - 105.0405470085, - 104.912416991, - 79.763824145, - 78.2358219175, - 75.4658001665, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.852472208800002, - 38.644191366049995, - 65.11371642499999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.53808654449999, - 101.01519648349999, - 100.942488137, - 75.508907719, - 77.47043376650001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.87518614545, - 38.6542926558, - 65.1111213185, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 77.391897207, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 24.4149338129, - 29.914297248700002, - 47.5028781782, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 65.10874456900001, - 49.108233916299994, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 29.903051375700002, - 29.72227263575, - 56.2519097805, - 56.2519097805, - 74.19253706399999, - 82.845769811, - 81.835713992, - 77.8156359045, - 77.747443099, - 56.9263559865, - 38.5730271334, - 7.37235832415, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 5.6591993994, - 29.683176006449997, - 29.73626586175, - 65.1229896185, - 66.6685203965, - 82.36290091949999, - 83.1155406765, - 84.16493020099999, - 84.30767627300001, - 84.1319761355, - 64.785758479, - 43.45933083715, - 7.37235832415, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.6824197736, - 38.538240202800004, - 65.10874456900001, - 98.397495229, - 104.96030631800001, - 116.49667624850001, - 125.3485198615, - 129.614585667, - 129.953774143, - 126.553789557, - 122.74303519050001, - 119.86900378450001, - 91.640410461, - 89.40377736500001, - 84.365770715, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.6375970172, - 38.538240202800004, - 65.3847079805, - 112.5923159425, - 116.96089152500001, - 119.9564857645, - 121.365255677, - 122.24165235449999, - 122.584946199, - 122.07127696849999, - 121.0927655665, - 118.8165402705, - 90.918069609, - 88.428238129, - 83.41055026549999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 99.5095982765, - 104.3736861725, - 108.076021092, - 111.3853889095, - 112.1137675825, - 112.22484593749999, - 111.9173828525, - 110.99680464299999, - 84.025984727, - 80.38118779050001, - 75.931102849, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.7645456989, - 38.5634999197, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.0820714715, - 98.083569401, - 98.08259700949999, - 73.96714483550001, - 75.67873828249999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 24.45118104355, - 29.9022597602, - 47.42719078335, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 65.10874456900001, - 49.108233916299994, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 5.6591993994, - 29.80440449725, - 29.68674720725, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 7.37235832415, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.8659175196, - 38.67046969345, - 65.127930502, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 75.67873828249999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.8864004115, - 38.686263518400004, - 65.14611579849999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 75.67873828249999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.9972268198, - 38.7320919908, - 65.1614498665, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.0926665205, - 98.1946939165, - 98.5276904565, - 98.5231179035, - 98.5090164935, - 74.035529445, - 75.67873828249999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.85323078675, - 38.658859346099995, - 65.1187689915, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.512523658, - 100.5101799765, - 102.0370543145, - 102.77261493900001, - 102.731653974, - 102.6019243785, - 78.15250407250001, - 76.2132925665, - 75.4087759195, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.89647456545, - 38.6915495788, - 65.200374519, - 98.0831517495, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 73.965579358, - 75.67873828249999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 24.239757506049997, - 29.78970546825, - 47.40652278225, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.89913478300001, - 99.4453678495, - 99.4294224155, - 99.3984300045, - 65.10874456900001, - 49.108233916299994, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 5.6591993994, - 29.820554654250003, - 29.70076587055, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 7.37235832415, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.8207545339, - 38.63005241515, - 65.11143349199999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.0778579005, - 98.09465853750001, - 98.83328328350001, - 99.52713584150001, - 99.491815469, - 99.4463035005, - 74.10341802399999, - 75.6804045845, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.792715698, - 38.603152672600004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.074818134, - 98.075119262, - 98.8299726865, - 100.42173804849999, - 100.745459254, - 100.6691254005, - 75.0889036435, - 75.71202608349999, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.74819905295, - 38.55819528305, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.134949078, - 99.64461114150001, - 100.3980517225, - 101.4717044665, - 102.531204725, - 102.3231662175, - 76.570849369, - 74.2843985495, - 75.42635133350001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.78069449965, - 38.606508981850006, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.076195074, - 98.08343097599999, - 98.0873794715, - 98.0892656035, - 98.07966069899999, - 73.965579358, - 73.965579358, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.7705314446, - 38.57539444365, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.4018580045, - 100.097002415, - 101.4511615765, - 102.7237103545, - 102.899126854, - 102.8101124705, - 78.489795441, - 76.679797253, - 75.5173695845, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 24.0605712116, - 29.68233069455, - 47.395074991550004, - 73.965579358, - 98.106865837, - 101.0841984865, - 105.4311787465, - 109.37987640200001, - 110.2025223805, - 110.106283297, - 110.044432453, - 109.53034122349999, - 72.624522877, - 48.94768786115, - 57.815790512499994, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 74.85557142350001, - 76.6486767185, - 78.345169948, - 79.9282565995, - 79.80276618949999, - 57.219078826, - 38.5755843719, - 5.6591993994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.75890243015, - 38.5649196881, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.053949092, - 100.0896494125, - 100.100518945, - 100.08420307, - 100.006099403, - 99.9082008415, - 74.258121996, - 74.15843695400001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.8153002288, - 38.5886831524, - 65.10874456900001, - 98.07451971399999, - 98.41094017649999, - 100.2762974655, - 100.823632952, - 104.59253954900001, - 106.2927868725, - 106.3431369085, - 106.1106743875, - 105.803979812, - 81.09481135050001, - 76.7224674645, - 75.681720489, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.7754382715, - 38.584280781000004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.32927582500001, - 101.412953309, - 104.046529235, - 104.87941281399999, - 104.8025715605, - 104.55395604, - 104.31471953350001, - 79.90974368750001, - 75.854134407, - 75.5403782275, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.776891838850002, - 38.57577934975, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 99.76304260350001, - 104.1914032345, - 104.620663188, - 106.0353637435, - 106.9046354225, - 106.6606356725, - 106.18468420549999, - 80.417686175, - 75.2866987745, - 75.5918085615, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.082401304, - 99.9826064155, - 104.6105425425, - 108.576571031, - 110.6723112655, - 111.6136799375, - 111.00487138449999, - 110.4935074435, - 84.0979102665, - 79.174549377, - 75.982940578, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 24.02220601465, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.5383789395, - 110.05741349200001, - 113.999216965, - 112.945096764, - 113.6094108915, - 114.5508630115, - 115.1980758365, - 114.4591934755, - 74.4598567975, - 49.1681128706, - 57.885195619, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 74.222457191, - 75.764132757, - 76.754648411, - 77.13613397350001, - 58.0670750005, - 38.71395976395, - 5.6591993994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.69545890765, - 38.5423859129, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.20278293749999, - 101.795334063, - 105.32650555000001, - 108.58004845800001, - 110.22819047200001, - 109.88940262850001, - 109.107339407, - 81.06871252799999, - 75.45764926449999, - 75.6639719495, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.7137012254, - 38.54808332525, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.261936882, - 103.438012876, - 106.6967666275, - 106.704439707, - 106.6051608935, - 106.4444750685, - 106.1870353095, - 80.029689635, - 74.575228202, - 75.503541145, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.7230965683, - 38.547733760949995, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.720249965, - 101.6266385345, - 105.0192813255, - 106.760430069, - 106.75185155950001, - 106.50619822350001, - 106.00392403250001, - 79.6834926185, - 74.8924384465, - 75.6280727015, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.787441059549998, - 38.55787165145, - 65.10874456900001, - 103.7157358635, - 111.682885724, - 116.451847537, - 119.7736773035, - 123.095066333, - 123.9530531285, - 122.98167910400001, - 121.066390728, - 118.97358759149999, - 90.774184351, - 86.7968559105, - 84.3044116275, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 13.12722610085, - 24.6375970172, - 38.538240202800004, - 65.12533963050001, - 103.92540889, - 108.63106910350001, - 111.78134960150001, - 114.5461656415, - 117.518939681, - 121.02665636100001, - 123.086457624, - 122.09142962950001, - 119.262618886, - 91.39474238049999, - 85.6809844815, - 82.8344959165, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 24.06052878525, - 29.6814054141, - 47.4059474023, - 79.506458408, - 111.4865675845, - 117.504894015, - 120.628722164, - 122.9542612945, - 123.73241124399999, - 124.38306695449998, - 124.08092479100002, - 121.4045366745, - 80.72656943999999, - 56.173797231, - 60.1531474245, - 40.03491110115, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 5.6591993994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.7316903037, - 38.5572363358, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.95304300549999, - 100.185989259, - 102.7322960095, - 103.9166169545, - 103.75106256800001, - 79.3955935405, - 79.045433323, - 77.1817460745, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.70121379215, - 38.543739571699994, - 65.10874456900001, - 98.07451971399999, - 101.3297835505, - 107.643005673, - 109.557296244, - 111.8548867815, - 113.6831708885, - 115.493852257, - 115.3395148735, - 114.413616875, - 87.420537263, - 82.8293598205, - 80.09490923, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 38.538240202800004, - 5.6591993994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.25556493799999, - 102.186426812, - 103.80815078350001, - 105.1826787485, - 105.1337966835, - 104.87968713149999, - 80.369826734, - 78.255194963, - 75.93032973, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.5178998955, - 100.5654403185, - 101.878097063, - 102.1018928885, - 102.0284399045, - 77.736246946, - 77.517235601, - 76.101244107, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 24.02220601465, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 101.618013412, - 110.721838854, - 116.811012113, - 117.714143703, - 117.158843518, - 116.258792849, - 76.4997686185, - 52.364946419, - 58.196102125500005, - 39.9884951618, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 75.504904454, - 77.589416531, - 82.70792497549999, - 87.89210913149999, - 88.64036956250001, - 69.7666886955, - 46.3452811303, - 5.6591993994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 66.25850553949999, - 113.9664126375, - 116.60045235, - 119.222204867, - 122.27633471300001, - 124.98375129349999, - 127.10502372650001, - 128.2145070425, - 126.33112191000001, - 123.362827512, - 94.19283686499999, - 88.481377155, - 85.6051942655, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 67.5720217275, - 112.88740766049999, - 119.73307786299999, - 125.1605309725, - 126.88683649699999, - 128.465518775, - 129.753566726, - 132.539087309, - 132.7933116995, - 130.21257019, - 101.069942099, - 94.533325387, - 89.903605437, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 67.14189700850001, - 115.8475416185, - 121.5966780915, - 126.05077643349999, - 127.1936540325, - 127.9809748335, - 128.313472323, - 128.1323022605, - 125.89580284949999, - 122.63381176399999, - 94.37587022849999, - 89.176380588, - 85.6415131485, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 105.61954479350001, - 116.2351462065, - 123.132957826, - 126.08916098700001, - 128.04073215900002, - 129.11147055400002, - 127.80120262349999, - 125.12898736250001, - 121.51650659500001, - 93.102217782, - 87.4112549905, - 83.9196726105, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.201426382, - 100.870341126, - 108.043829247, - 113.5026115145, - 115.12666378450001, - 116.0927701075, - 116.4660672955, - 115.8913312225, - 114.8027409455, - 87.7260825285, - 83.022551131, - 78.749471527, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 24.02220601465, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.5056369545, - 104.19129238000001, - 111.0012901955, - 114.49317870899999, - 115.0637801795, - 115.446988641, - 115.278668438, - 114.824216816, - 77.27180797349999, - 54.08669639, - 58.962694774, - 39.994794390050004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 76.55055500499999, - 83.374017944, - 86.0951400615, - 87.6333574, - 87.85322121050001, - 65.872858506, - 42.5150894995, - 5.6591993994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 101.4725988615, - 106.991464841, - 111.183200587, - 113.600433052, - 115.46105588799999, - 114.6603609405, - 113.65976679900001, - 87.13302628950001, - 82.9784575945, - 79.9817974445, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 101.94198757849999, - 108.08649049499999, - 111.01771509849999, - 113.4245191075, - 115.2850335515, - 116.871717136, - 117.3675787595, - 116.828378692, - 89.2361396215, - 84.76491918650001, - 82.8880651015, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 100.9106653035, - 104.5776415355, - 105.313776128, - 105.8696295075, - 106.5448472575, - 106.4326949015, - 82.183966732, - 82.6350867725, - 78.2156423135, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 14.8403850256, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 100.120916935, - 105.1020621255, - 110.47345848100001, - 114.6150542015, - 116.325376807, - 116.265228491, - 115.5894763065, - 89.7562652895, - 87.68802828199999, - 83.714769661, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 99.5115198155, - 112.6334760985, - 121.72919103999999, - 124.9300380135, - 126.9959070095, - 127.92117094650001, - 128.82387967600002, - 126.441997756, - 123.35968583500001, - 93.99950367, - 89.61292562199999, - 85.34481716949999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 24.02220601465, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 103.318218385, - 113.92446185, - 118.9979349315, - 119.981733561, - 119.386244338, - 120.9652789635, - 121.179158092, - 118.904459311, - 79.020840908, - 57.763379549999996, - 61.109216667000005, - 40.094215501949996, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.446257946, - 58.971698352000004, - 83.861142602, - 86.41105387, - 86.6316176695, - 87.297133896, - 87.755024288, - 68.0561881215, - 44.829206153550004, - 7.37235832415, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 99.023954783, - 107.24564836, - 116.6032921625, - 121.3146564005, - 126.579338362, - 128.05321914450002, - 130.955755945, - 127.47155814850001, - 122.86419291850001, - 93.36085458849999, - 90.2077427515, - 85.806711276, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 107.893866117, - 118.49912048300001, - 124.45149363499999, - 126.46268787000001, - 127.58199420000001, - 128.69650144550002, - 131.8867148815, - 127.8163467635, - 122.1986416155, - 92.183294403, - 89.60867378900001, - 85.746205502, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.653546179, - 107.8834950575, - 112.179288825, - 115.994705307, - 118.6048207705, - 119.3606442375, - 119.490863164, - 119.3089969275, - 92.77170004300001, - 89.674168763, - 86.079882211, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.986541179, - 107.53341614050001, - 117.471673317, - 120.34857082250001, - 122.805129522, - 123.9309337275, - 123.40454924250001, - 123.23810907849999, - 121.35133927300001, - 92.6561785755, - 89.83503450299999, - 85.569152804, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.0380453975, - 109.4366592035, - 114.950201349, - 117.17236067200001, - 118.0798728485, - 118.3455187475, - 117.9996749235, - 116.951060973, - 89.018108679, - 86.366662973, - 83.38154724549999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 24.02220601465, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 99.8276717555, - 103.42660473849999, - 105.55044811949999, - 107.745210726, - 109.61132424399999, - 111.0611508775, - 111.92823737900001, - 111.902971008, - 76.5155853495, - 57.8136844635, - 65.0567171165, - 42.652120590100004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 5.6591993994, - 29.6814054141, - 31.1959892523, - 70.2222167945, - 76.145575342, - 95.653250567, - 95.980896753, - 96.4818178135, - 96.769719349, - 97.24385985800001, - 75.3338623545, - 51.193795514, - 7.37235832415, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 98.3031800985, - 106.639465333, - 116.051234573, - 121.070413399, - 124.09400025949999, - 125.19334263049998, - 126.324991789, - 124.76082179, - 121.6738489145, - 92.383358554, - 89.3735286855, - 85.420714166, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 99.05172583950001, - 103.836835108, - 111.611364969, - 117.44211554600001, - 121.449534881, - 124.1227695555, - 125.5374492625, - 124.69232166399999, - 122.257759452, - 93.18103004800001, - 89.290489911, - 84.97104042, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.1176375405, - 109.432100984, - 116.247222982, - 121.290821417, - 122.4213780935, - 122.74149551250001, - 124.00556954750002, - 124.255730952, - 122.85513109549998, - 119.4598299535, - 90.138168762, - 87.64367733600001, - 83.3689030555, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 24.6375970172, - 38.538240202800004, - 65.10874456900001, - 103.2313650195, - 114.884795205, - 119.9328321605, - 121.5725895435, - 123.6795043395, - 123.21239297650001, - 121.8436397855, - 120.479436604, - 118.86940033149999, - 90.98702227700001, - 87.965002201, - 83.58054681, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 65.10874456900001, - 100.2187111925, - 107.090884335, - 112.136661086, - 115.4704543155, - 118.110046928, - 120.007652036, - 120.9207385935, - 119.1136676825, - 115.0892407425, - 85.60316526199999, - 84.0992452295, - 76.8332797755, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 25.7353649394, - 29.6814054141, - 47.395074991550004, - 73.9890170895, - 102.7344778735, - 109.248836945, - 113.614591069, - 116.12307936900001, - 116.955275152, - 116.93424824, - 116.97998387800001, - 115.88804820850001, - 76.06602664399999, - 55.0790248525, - 58.154085583000004, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.96681780200001, - 73.9728508735, - 73.9730341585, - 56.2519097805, - 38.538240202800004, - 9.085517248899999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.4696311204, - 38.57932254595, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.721630836, - 102.526891061, - 103.6413103965, - 103.921278915, - 103.94982162250001, - 103.6691431645, - 78.923162366, - 78.142360143, - 75.4938787635, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 65.10874456900001, - 106.5723235695, - 115.2429457885, - 121.3582935535, - 125.866542173, - 131.22838105600002, - 133.24959318350002, - 130.582288352, - 127.9746124005, - 125.721379226, - 97.300466358, - 96.0656522835, - 90.522113618, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 71.3876887365, - 122.0887274855, - 132.071247459, - 136.92776590449998, - 139.410629428, - 142.622872992, - 142.053435507, - 142.32849072099998, - 140.685513718, - 138.16884658950002, - 103.554567416, - 96.76132381000001, - 89.2872536695, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 74.247374478, - 123.81926745850001, - 127.0710472215, - 131.149196566, - 135.7862619045, - 138.2547452125, - 137.42002567650002, - 136.142020751, - 133.3719645715, - 128.4678150815, - 96.46473808799999, - 92.356682155, - 84.9595881415, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.2771266265, - 106.1926863065, - 109.237663123, - 111.495734559, - 112.9736252505, - 114.250065635, - 113.563866396, - 112.454392478, - 84.3534760835, - 82.84795954149999, - 76.7604849405, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 25.7353649394, - 29.6814054141, - 47.395074991550004, - 76.169729102, - 113.8194971735, - 121.9799879135, - 126.14345248250001, - 126.79732045349999, - 127.49644674099999, - 128.548936973, - 128.791614553, - 125.07050179400001, - 82.820631307, - 62.227269676999995, - 65.3153965275, - 41.579828543750004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 5.6591993994, - 30.36398131, - 38.56418102205, - 73.9699234825, - 76.711921145, - 97.2469863105, - 100.10779217800001, - 101.22941686349999, - 101.6841044265, - 102.153468472, - 77.562633183, - 52.2287982705, - 9.085517248899999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 67.54016762149999, - 115.398776982, - 122.450691236, - 127.067907426, - 130.3484219875, - 133.1675330145, - 133.7062781305, - 133.541069472, - 133.31985868299998, - 129.4667516495, - 98.081461809, - 96.281248806, - 88.446160667, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 66.3219265005, - 114.7456955005, - 121.307273055, - 127.749166759, - 131.99589525000002, - 134.0806961015, - 135.47079019650002, - 133.7065439435, - 128.8708658365, - 123.45612662100001, - 91.247185622, - 90.1801516615, - 82.72555009, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 65.8373695355, - 113.4342761735, - 119.6346558845, - 124.198484434, - 129.35077188949998, - 132.427889655, - 131.779884274, - 132.139186905, - 132.1066007105, - 129.11768543, - 99.075366267, - 98.3243006485, - 90.2452048965, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 26.350755941899997, - 38.538240202800004, - 66.98641178049999, - 113.8217701975, - 123.371187247, - 130.26919241849998, - 133.48686673350002, - 134.800083951, - 134.4857784165, - 134.2116456585, - 133.48389684199998, - 130.374245503, - 101.52964967449999, - 101.266937552, - 92.6670747485, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 66.6948833245, - 113.9870235475, - 121.6563049815, - 127.66573506649999, - 130.458446297, - 132.0456916665, - 132.660691222, - 134.20503489549998, - 130.6689188025, - 127.59405203150001, - 97.809020734, - 96.35648711450001, - 88.298672244, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 27.448523864149998, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.37961037800001, - 102.317561669, - 106.7069568515, - 109.43224908250001, - 110.5782993285, - 111.8254381835, - 112.041561828, - 110.93159926599999, - 72.53722045350001, - 54.0409914675, - 58.010326595, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 9.085517248899999, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 75.766344463, - 81.815189358, - 85.4450540325, - 86.235628731, - 85.909987848, - 63.015582513, - 39.1202787809, - 10.7986761736, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 99.57856702999999, - 108.386163217, - 114.17124043199999, - 114.8909977485, - 114.553968361, - 114.0865432885, - 111.8444075145, - 81.9259805715, - 82.106420631, - 76.01770572999999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 99.2244075455, - 103.2117403445, - 106.0345290405, - 110.1784575845, - 115.334009148, - 119.0254823785, - 117.9757162655, - 115.564619644, - 86.3782827425, - 87.0018835415, - 79.0875121685, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.906005388, - 104.7329590905, - 109.958110158, - 113.9721320375, - 117.550376593, - 120.8326032585, - 119.751085561, - 117.456939199, - 89.1187140585, - 92.0643412465, - 82.5418780255, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 98.856603051, - 105.904731116, - 112.5855224035, - 118.44904191750001, - 122.6140481425, - 122.31109569849998, - 121.66412383, - 120.6590813885, - 118.7614537405, - 89.937196151, - 92.26270043400001, - 84.141360355, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.11752844600001, - 108.36792885450001, - 115.513324659, - 122.6092998965, - 126.564580465, - 129.29565638, - 131.42179670299998, - 129.7605092885, - 125.015168193, - 120.5658893605, - 91.94805057699999, - 94.279485059, - 85.588974831, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 27.448523864149998, - 29.6814054141, - 47.395074991550004, - 78.436067533, - 115.1087757225, - 123.52458085, - 125.94829589100001, - 127.2252509255, - 127.0845925815, - 126.623012566, - 126.36474425399999, - 122.54231222349999, - 80.9461534815, - 63.917273131500004, - 64.197416722, - 41.45744072305, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 9.085517248899999, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 62.082105059, - 67.51015071100001, - 88.367257158, - 89.818122027, - 90.1951613725, - 89.99398933650001, - 89.7591444715, - 68.68988172, - 46.58827514235, - 12.51183509835, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.13061326149999, - 109.862147961, - 118.22139845299999, - 123.62562890999999, - 127.10728094899999, - 130.0743697135, - 129.323873212, - 128.371153034, - 125.740587304, - 122.25569754649999, - 92.9527644205, - 94.160716957, - 84.7064194075, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 99.6367862175, - 107.333958589, - 113.915549052, - 117.2764752375, - 119.65772892, - 120.182429729, - 119.95241448450001, - 118.9179383785, - 117.6908526795, - 90.238035454, - 92.23871880099999, - 82.7468352855, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.605584376, - 106.889535117, - 110.05855841099999, - 112.30064140549999, - 115.370264698, - 117.899387194, - 117.81953024250001, - 116.900405533, - 89.095411941, - 90.695407268, - 81.948850938, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 98.19100942249999, - 103.0133978325, - 113.152031802, - 119.9852859475, - 122.857026547, - 123.150543429, - 122.66299794400001, - 121.574039939, - 119.29303115500001, - 91.6366685375, - 95.3755300295, - 84.6277742065, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.06391486665, - 38.538240202800004, - 65.10874456900001, - 101.9675730595, - 109.98929742600001, - 115.5836649755, - 118.733202857, - 121.23577631799999, - 121.7396387005, - 121.181777618, - 120.110977838, - 118.5940835635, - 90.027676251, - 91.4106896205, - 78.0069089645, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 29.16168278885, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 102.673983619, - 110.471298396, - 115.611588259, - 121.0367787095, - 122.54923143449999, - 121.71594524950001, - 119.0544865785, - 76.4636212705, - 60.116647734, - 58.8665490725, - 40.26749078425, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.889338365, - 84.24261981699999, - 90.415524385, - 91.592144136, - 91.478047438, - 91.0225783585, - 69.229476718, - 45.418252755400005, - 14.22499402305, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 76.3456176375, - 79.39554425, - 80.4498357515, - 80.481483693, - 80.64585825850001, - 61.89573148149999, - 39.31701452855, - 14.22499402305, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.81437693150001, - 102.885747443, - 109.8649656105, - 113.0887828745, - 112.74937714149999, - 112.237909665, - 111.5738845745, - 84.8844686675, - 88.87583794150001, - 76.873737659, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.03575540050001, - 108.39849860199999, - 112.281142535, - 116.75491578750001, - 119.6787577795, - 120.7570521335, - 120.290778801, - 118.676176481, - 89.874692803, - 94.0731507685, - 83.913367307, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 100.17787604450001, - 108.155114574, - 118.30860883749999, - 122.98947928199999, - 124.84939894050001, - 127.7366576185, - 127.00572252399999, - 124.87344863199999, - 122.19279302049999, - 93.96505543449999, - 98.63537804, - 88.814470721, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.674524028, - 111.987675254, - 120.57868615, - 125.2618316465, - 127.4239487865, - 130.292708685, - 132.097617496, - 131.818983883, - 129.100727693, - 126.481037137, - 98.407044027, - 103.4635876845, - 91.09182340650001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 29.16168278885, - 29.6814054141, - 47.4271306465, - 85.70074720400001, - 122.47165682949999, - 128.528834685, - 131.2197374425, - 132.9692197425, - 133.1125947505, - 131.414336281, - 129.0741575905, - 126.427112199, - 85.501031224, - 72.47120231400001, - 70.172984917, - 49.02421880125, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.8000756819, - 34.8927002704, - 72.611094722, - 80.6513947765, - 103.289428459, - 104.70219727850001, - 105.9916498075, - 104.63350029499999, - 100.9241559485, - 77.138163046, - 51.259615565, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.12949768349999, - 103.602417758, - 116.977713846, - 125.1737457485, - 126.3787931205, - 126.5913899655, - 126.83443130599998, - 126.9948845045, - 125.9342002915, - 122.409262843, - 91.70135293649999, - 97.69930817400001, - 86.6607349425, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 98.3353901425, - 104.29916233649999, - 112.4661890095, - 118.7502110075, - 122.37251334749999, - 122.7405379585, - 122.51466001, - 122.05720197650001, - 120.25705749950001, - 91.464034618, - 97.427400197, - 85.28327483, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 98.2402697995, - 103.760053735, - 110.2963628295, - 113.66177193200001, - 117.860636082, - 120.711001608, - 121.6164029345, - 120.0242237705, - 117.61488771799999, - 89.4122769105, - 95.068366515, - 82.957419254, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.08368684649999, - 107.07448441849999, - 118.2947400365, - 121.0921825975, - 120.8604309395, - 120.324947096, - 118.73837945300001, - 115.523419757, - 86.02759267, - 92.449727091, - 81.7814465665, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.7770737914, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.3085080815, - 105.0498611235, - 106.0040671745, - 106.2633652995, - 108.461701103, - 111.170834075, - 111.4494493735, - 110.99123266250001, - 87.337805284, - 92.7442369645, - 81.67948687399999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 30.8748417136, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 100.4899264755, - 102.3885382305, - 103.8793966855, - 105.0133224755, - 105.706020821, - 105.98938291900001, - 105.7153490525, - 73.7012156405, - 60.773016832, - 58.232003237, - 40.0224152093, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.3407477605, - 59.8842330465, - 85.750733547, - 90.749212168, - 92.4478954895, - 92.0778205405, - 91.34529307449999, - 67.0956586485, - 43.989680971300004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.4417517665, - 101.433344251, - 103.293053358, - 104.3395855575, - 104.9478102315, - 105.17568604200001, - 105.0411836035, - 104.7001126995, - 81.8535370255, - 88.205350127, - 76.0812051465, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.161216741, - 104.364944366, - 106.5795893465, - 106.88416776250001, - 106.91142031349999, - 106.4370014675, - 83.420194737, - 90.0165888475, - 76.99913604, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.65333608249999, - 100.65338018300001, - 101.6642717885, - 79.01360297800001, - 84.909655769, - 75.589296096, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.51308030505, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.9688980295, - 102.8978323435, - 106.7992565725, - 108.454879836, - 108.3821776755, - 108.163024193, - 107.815511746, - 83.584206422, - 88.3846397125, - 76.3181158365, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.5124873536, - 38.539349318599996, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 101.7498815105, - 108.648036598, - 111.213286364, - 112.1256796965, - 112.7166581935, - 112.674368955, - 111.8717032505, - 88.5117007625, - 92.0845037375, - 80.4088884315, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 30.8748417136, - 29.6814054141, - 47.395074991550004, - 75.2649137875, - 107.3932898065, - 113.7945858305, - 119.7635813935, - 124.072912955, - 125.83143184849999, - 126.2122625855, - 126.30010857, - 124.55788775500001, - 85.884937374, - 69.071637622, - 66.982088232, - 44.4674172341, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 29.6814054141, - 33.28942496655, - 71.4957440305, - 80.80544304600001, - 103.8157113205, - 105.36430963449999, - 109.39321398099999, - 109.4800497465, - 106.983455167, - 87.2995808935, - 60.6528994765, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 71.9332691705, - 120.8094180645, - 132.9664008125, - 146.203294003, - 147.717146898, - 145.59639971, - 144.4243066245, - 142.9487424115, - 138.5979092695, - 132.0842858925, - 102.80020925950001, - 104.034351947, - 92.82058767299999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 69.9428097015, - 118.32088898849999, - 124.68071240949999, - 130.5558583, - 137.840360547, - 141.634247394, - 140.16330398250003, - 140.7628223765, - 138.4682046495, - 132.068981162, - 102.972615645, - 104.59124087549999, - 93.0215079655, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 99.08172198999999, - 107.260388683, - 110.3853176505, - 113.4127918655, - 115.1220025705, - 114.95469577, - 114.83463748749999, - 113.0853786165, - 87.8854181805, - 90.7250819175, - 77.7230966945, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 99.4774881175, - 107.90113246050001, - 111.0100125735, - 112.2820615955, - 112.769312282, - 112.5376962915, - 111.680404839, - 110.31270848599999, - 86.6039631085, - 89.0466937685, - 77.00158151149999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.490232716099996, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 101.5858477965, - 108.93356579099999, - 111.69835389049999, - 111.6400775225, - 111.15979853500001, - 110.53012298899999, - 109.32014108450001, - 87.15185121399999, - 89.688925755, - 77.1470954915, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 30.8748417136, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 98.07627902700001, - 98.5203447675, - 103.169908323, - 106.4844207555, - 107.057415113, - 107.0726347855, - 106.717227869, - 75.2748662915, - 58.048795147, - 57.678972763, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 43.677716977, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.317834952549994, - 38.60986842215, - 65.10874456900001, - 98.07451971399999, - 98.2756480205, - 105.64818258400001, - 113.4045963425, - 118.968107528, - 120.5051291775, - 118.89694757250001, - 115.8769664725, - 111.9204984115, - 87.6578171245, - 88.2756031645, - 77.116710347, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.20339164085, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.587893488, - 99.76155224099999, - 99.742544402, - 99.7269171415, - 99.69121335450001, - 99.6163679055, - 79.9047064655, - 84.80182819, - 75.73267536899999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.28842612165, - 38.563827944450004, - 65.10874456900001, - 98.07451971399999, - 98.4225620295, - 101.84403212449999, - 105.23273336449999, - 106.581141648, - 106.539771922, - 106.3634201005, - 106.0788290785, - 105.6450766145, - 85.6007852805, - 86.68451684099999, - 76.8111276775, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.22595363695, - 38.538240202800004, - 65.10874456900001, - 98.14113543149999, - 100.062445013, - 103.684661201, - 108.3957736735, - 113.071327669, - 114.1809330075, - 114.50312645400001, - 114.2914210065, - 113.308300533, - 90.0602935325, - 92.646320436, - 81.3034714495, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.20339164085, - 38.538240202800004, - 65.10874456900001, - 98.122176423, - 104.693958136, - 118.3415753405, - 124.51861545549998, - 127.69490661500001, - 128.584986007, - 128.7082483155, - 124.96449559499999, - 120.359357292, - 96.180701039, - 96.42436836, - 83.3892767895, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 32.5880006383, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.1463024995, - 102.975210537, - 109.645027681, - 111.9256397235, - 112.6867586035, - 112.906296969, - 112.4320562375, - 111.2570252835, - 78.6826977905, - 59.4786736425, - 58.856741631, - 40.301874889649994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.35323879, - 57.7934305735, - 79.551844334, - 84.1628611115, - 85.9898689635, - 85.86117768, - 84.9660849725, - 58.9598195985, - 46.2952778798, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.5811656805, - 64.158386039, - 87.167870373, - 85.77726758700001, - 85.3855967865, - 83.85385174199999, - 81.3200343075, - 57.2264675245, - 45.428970493, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.20339164085, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 100.0232510585, - 105.485516767, - 105.682720907, - 106.05320904, - 106.3602618455, - 106.4139475305, - 106.1287541095, - 105.55732267699999, - 86.0969415985, - 86.165059513, - 76.9991233835, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.20339164085, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 102.60921857550001, - 110.242627435, - 110.505562777, - 110.3120919425, - 109.841197842, - 109.44171329299999, - 107.87133610000001, - 86.6224003025, - 85.82817456000001, - 76.320052198, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.20339164085, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.1890238995, - 100.4497371575, - 104.36036835350001, - 106.612731484, - 107.4061630365, - 107.451435266, - 107.0255132885, - 106.32271184599999, - 87.70022007600001, - 86.6703191095, - 77.0578127795, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.20339164085, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 98.0932070875, - 98.4033228105, - 99.074653987, - 99.7054453, - 100.3591048105, - 100.5977391295, - 100.4801098055, - 100.4086937145, - 82.4373610505, - 85.5600533555, - 76.188347326, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.30115956305, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.39575103, - 103.65136891649999, - 104.092327611, - 103.85066553450001, - 103.47076023700001, - 74.3486505725, - 57.748172564499995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 56.2519097805, - 47.104034826450004, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.9756236281, - 38.56845149395, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.69473809, - 99.64447395350001, - 101.1543848765, - 101.8483421045, - 101.7392112935, - 101.5518514335, - 84.042443856, - 85.04247323300001, - 75.9487331765, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.0617921265, - 38.56304220155, - 65.10874456900001, - 98.07451971399999, - 98.18639672500001, - 100.0589990475, - 103.2492710515, - 105.5443317925, - 107.06967347150001, - 107.69842768400001, - 107.4206667935, - 106.67846589, - 87.831788884, - 86.2821496095, - 77.00482243750001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.916550565600005, - 38.538240202800004, - 65.10874456900001, - 98.07451971399999, - 99.1086918125, - 100.6391071065, - 100.694902629, - 105.302254535, - 110.312377565, - 110.2307696405, - 108.7051267415, - 106.082051238, - 85.4662918885, - 85.9730330975, - 76.6641208635, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.916550565600005, - 38.538240202800004, - 65.10874456900001, - 100.3439128985, - 108.1086183005, - 107.878264731, - 108.102706707, - 108.161301386, - 108.322957578, - 108.3596992885, - 107.81365328950001, - 107.5684016895, - 89.38871540849999, - 86.6545703445, - 77.33757353300001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.916550565600005, - 38.538240202800004, - 65.2589327035, - 105.984934335, - 114.8423233315, - 126.1846563435, - 126.313173345, - 124.86178046799999, - 124.6505508585, - 125.042393726, - 119.6924350165, - 111.642536104, - 90.0205965715, - 86.95157999749999, - 77.68213173400001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.30115956305, - 29.6814054141, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.09621838, - 104.2927560915, - 108.23968036699999, - 107.620691258, - 106.27827566799999, - 74.7405102565, - 57.6907569925, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 29.6974197375, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.9658624495, - 73.965579358, - 56.2519097805, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.981372942600004, - 38.622568804299995, - 65.129916832, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.5900819105, - 105.76530526, - 108.4699640905, - 107.9379589725, - 106.2788056775, - 86.4454382385, - 84.2939523295, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.0049145315, - 38.5852813129, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.569224187, - 100.0801526525, - 103.188477542, - 104.673576698, - 104.370525654, - 103.96058217950001, - 86.109966257, - 85.1373697955, - 76.0038458755, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.0036444461, - 38.5769004685, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.7382274635, - 101.63590604699999, - 104.1161901935, - 103.9068103725, - 103.748569656, - 103.646478163, - 103.261396339, - 85.75888024049999, - 84.918936294, - 75.926787219, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.985428885000005, - 40.27654203125, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.0968926435, - 98.53935472250001, - 98.8776630125, - 98.8660103135, - 98.84459800549999, - 98.824432885, - 84.95702324899999, - 84.9029589565, - 75.8079426265, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.1927461754, - 40.411402271899995, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 99.2339844675, - 101.4898350345, - 101.8409417175, - 101.800861722, - 101.79822263, - 101.6942105515, - 101.303098707, - 85.7485739005, - 85.26530231950001, - 75.9409522405, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.563636399249994, - 31.60072184445, - 47.4024047884, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.650505589, - 99.583737978, - 99.8960774425, - 99.8351543755, - 99.7499821935, - 99.641475801, - 76.35329491799999, - 57.851957969999994, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 29.7158705596, - 29.6814054141, - 56.2519097805, - 56.6124346695, - 77.878543797, - 80.721183531, - 80.9682383485, - 78.903834637, - 77.04446552750001, - 57.339814806, - 48.819159781699994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.15530597175, - 40.40317402985, - 65.10874456900001, - 98.07451971399999, - 98.686212587, - 105.8731451005, - 114.3976890755, - 118.939394796, - 121.89982539799999, - 123.893227938, - 120.1053182475, - 114.26222241400001, - 93.92720313449999, - 90.941911719, - 79.25686420449999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.944550551249996, - 40.25818886455, - 65.10874456900001, - 98.1166111735, - 101.322179092, - 110.649168964, - 117.30287988, - 122.18161896500001, - 121.437574056, - 117.19097413499999, - 112.0775526215, - 107.9938709835, - 90.7430101505, - 86.951671617, - 76.51216876550001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.94954990115, - 40.263065632700005, - 65.10874456900001, - 98.199792359, - 104.5938775745, - 110.49071441150001, - 110.263791344, - 110.10339325049999, - 110.160190295, - 110.10942458150001, - 109.9833151975, - 109.7584625185, - 88.3522581475, - 85.68883737750001, - 76.44058113999999, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 34.964363157150004, - 40.275257238200005, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.092117629, - 99.04273862599999, - 99.9203230835, - 99.855067332, - 99.82523552900001, - 99.7446918695, - 101.318934294, - 85.241005517, - 84.694607969, - 75.438094578, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.2940736236, - 40.500783638600005, - 65.12388640750001, - 98.07451971399999, - 98.07451971399999, - 98.134024664, - 98.880976071, - 99.689817623, - 99.9205291095, - 99.907009018, - 99.8207228965, - 101.4545233125, - 85.6109166025, - 84.961075442, - 75.6785991815, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.55118202475, - 31.5912323536, - 47.41178917415, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 99.7876786385, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.97175228045, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 7.37235832415, - 29.942171514050003, - 29.72796429285, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 57.965068705, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.54957940025, - 38.59832689515, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.10628197349999, - 98.86036714, - 99.57786620899999, - 99.6444485805, - 99.593504777, - 101.19102275799999, - 109.61132784, - 84.9287383125, - 84.589432383, - 75.39798849, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.4336998792, - 38.656865901399996, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 101.01412367649999, - 105.9349548065, - 106.329070636, - 106.202081846, - 105.489575771, - 102.72143866249999, - 109.7567668935, - 84.91514941999999, - 84.6802888635, - 75.5124374215, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.263819825099997, - 38.5728769357, - 65.10874456900001, - 98.07451971399999, - 98.44458652, - 102.1736192245, - 105.2201709205, - 105.3242488985, - 105.1135066615, - 104.7713787075, - 105.434302574, - 110.4528932585, - 85.3314857355, - 84.883325356, - 75.847076196, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.3346647724, - 38.5511367158, - 65.124784399, - 101.265158692, - 109.17453144, - 113.931422143, - 117.651669551, - 116.94555037399999, - 114.02442753049999, - 110.79607230549999, - 110.415672477, - 116.3870099265, - 87.488896111, - 85.723165037, - 76.469888753, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.12664028555, - 38.538240202800004, - 65.10874456900001, - 98.7317070765, - 105.69616241150001, - 112.704911935, - 115.44631225500001, - 116.05753905399999, - 114.988144596, - 113.470253914, - 111.594130058, - 115.463234814, - 86.601459812, - 86.109023822, - 76.86645083, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 27.47759870855, - 29.6814054141, - 47.395074991550004, - 74.480028706, - 106.718160059, - 111.61233628, - 112.0113018305, - 112.6736849295, - 114.8787132845, - 114.8251420875, - 111.85009511, - 116.12361126149999, - 77.2120606375, - 59.0158129055, - 58.753053817, - 40.16820582495, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 9.085517248899999, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 74.2102772585, - 74.2531581785, - 77.66285204549999, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.294401747699997, - 38.5910844796, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.38264687325, - 38.5644753461, - 65.10874456900001, - 98.07451971399999, - 98.0969661645, - 99.39479796500001, - 103.180645705, - 105.358820017, - 105.1613510865, - 104.934612685, - 104.4639864795, - 109.81200108750001, - 85.26635558699999, - 84.719455305, - 75.4703747225, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 28.478176582950002, - 38.61554646625, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.1573599315, - 98.22123046099999, - 98.216024944, - 101.6328986395, - 108.476193708, - 84.27647180000001, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.0537615648, - 39.3408387865, - 65.807229224, - 98.5017004325, - 98.2613997805, - 98.301693788, - 98.20863150800001, - 98.07451971399999, - 98.1710794985, - 98.1521752995, - 101.628329013, - 108.589816641, - 84.49853529100001, - 84.488895585, - 75.642419941, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.607162199250002, - 38.90991046335, - 65.1167397485, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 29.572951218500002, - 29.77689472145, - 47.395074991550004, - 73.965579358, - 98.07451971399999, - 98.087362188, - 98.37967235100001, - 98.50975631099999, - 98.50088347799999, - 98.485522324, - 101.8860377265, - 108.702313752, - 75.51044820950001, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.739192281050002, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 77.391897207, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.1248951658, - 38.7900987569, - 65.209835127, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.22851761950001, - 98.4081491435, - 98.38752116650001, - 101.790849951, - 108.628751504, - 84.38883695850001, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.03995345815, - 38.552375262300004, - 65.10874456900001, - 99.389771275, - 108.6041419, - 115.680248494, - 120.117492115, - 121.415872189, - 119.178923634, - 115.720182248, - 113.6838050925, - 116.5273028025, - 87.732768209, - 86.321453538, - 77.0090750475, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 29.787745593950003, - 38.538240202800004, - 65.10874456900001, - 99.07971888750001, - 100.917174808, - 105.4059994725, - 107.7545387615, - 108.559186112, - 108.7204272545, - 108.617798293, - 110.5323670855, - 111.837753037, - 86.2290360435, - 85.610927893, - 76.078022437, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 77.391897207, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.235996639350002, - 38.85962056985, - 65.2391259525, - 98.07451971399999, - 98.07451971399999, - 98.08105179750001, - 98.400069065, - 98.7185611205, - 98.6804475385, - 98.5927176015, - 101.9175853445, - 108.37510987949999, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 29.4804335684, - 29.88734796805, - 47.523204442, - 73.969441399, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 10.7986761736, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 77.391897207, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 30.088507084750002, - 38.56896641225, - 65.10874456900001, - 98.1038766445, - 99.246880011, - 103.282556693, - 108.323422358, - 110.3775523885, - 111.0944139665, - 110.71599794500001, - 111.40166601050001, - 114.7547482425, - 86.670454856, - 85.5364479675, - 75.8576731965, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.9294697754, - 38.72421232655, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.3486199115, - 98.7797524185, - 98.806887464, - 98.764298509, - 98.7790938075, - 102.1373135865, - 108.784731169, - 84.298794466, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.20143681615, - 38.74326005415, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.7425364415, - 100.1951098315, - 100.558429673, - 100.475724263, - 100.36426177999999, - 103.45904103950001, - 109.5909693105, - 84.7161798155, - 84.28484424450001, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.15485029, - 38.804243976, - 65.10874456900001, - 98.07451971399999, - 98.1447018115, - 99.31284149150001, - 99.7514032575, - 99.7035197165, - 99.67112011799999, - 99.656509758, - 102.90590205, - 108.96303675, - 84.431646165, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.02184310965, - 38.761605065599994, - 65.109604998, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.39944765, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 31.63462021815, - 30.228225434349998, - 47.779352818599996, - 74.09377355449999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 75.3933294055, - 57.7614679645, - 57.8119813235, - 40.175056144900005, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 12.51183509835, - 5.6591993994, - 30.60461692875, - 30.3981505237, - 56.868316344499995, - 56.843905261, - 74.506210087, - 74.49500846149999, - 74.487158671, - 74.498885203, - 77.9436111095, - 66.966614726, - 49.31749985575, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.543166480699995, - 39.233585485, - 65.5334274055, - 98.119357379, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3989177255, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.15362543695, - 38.821559545, - 65.112796021, - 98.07451971399999, - 98.3420021415, - 101.4686221875, - 103.530091797, - 100.935710005, - 100.3671961875, - 99.77858109, - 103.980381586, - 108.5608692415, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.8042945652, - 38.58652463825, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.21251747550001, - 98.4112319695, - 98.4034590855, - 98.39691927049999, - 98.37918388749999, - 103.4897727235, - 108.612666644, - 84.49408634000001, - 84.3201056425, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 31.8179276983, - 38.6588951438, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 32.05289741435, - 38.7841738597, - 65.115223569, - 98.07451971399999, - 98.084703823, - 98.531679834, - 98.8396556395, - 98.8335996925, - 98.8259594865, - 98.8358443285, - 103.947762621, - 108.95151387, - 84.66423591300001, - 84.26548175, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 33.10181018175, - 30.02031113995, - 47.4478766367, - 73.965579358, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 103.213996488, - 108.353473262, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 29.7771721373, - 29.6814054141, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 79.105056132, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.6732545775, - 16.696028621299998, - 16.6847631288, - 34.1457417529, - 39.1859745066, - 65.364821986, - 98.079557503, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.2504094625, - 84.460612298, - 75.809928183, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.62519196805, - 16.6323495975, - 16.90138032055, - 17.047770173150003, - 17.21085491865, - 34.478283875049996, - 39.32527460725, - 65.324821238, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.65721146285, - 16.79077938135, - 17.0020739588, - 17.036129697699998, - 17.1880394185, - 34.43810720565, - 39.16624776015, - 65.181137369, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.700835519199998, - 16.763101080450003, - 16.7695564895, - 16.90005932865, - 17.0708111111, - 34.33907737455, - 38.986557370199996, - 65.11755216899999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.60814601265, - 16.6681736277, - 34.0890676676, - 38.875920242300005, - 65.10874456900001, - 98.07451971399999, - 98.07451971399999, - 98.092774943, - 98.1794877945, - 98.173617003, - 98.171416587, - 98.17029117499999, - 101.5762526945, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 33.26637237055, - 30.033064349100002, - 47.4080134407, - 73.965579358, - 98.07451971399999, - 98.32442184749999, - 98.8773643295, - 98.83863298349999, - 98.802329657, - 98.7967521495, - 102.190466592, - 108.649724529, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 14.22499402305, - 5.6591993994, - 29.6814054141, - 29.6814054141, - 56.900617030999996, - 58.8211875475, - 79.731543179, - 78.2891645305, - 78.724210353, - 79.98341933100001, - 80.0401433395, - 67.203992136, - 49.058337374349996, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.7463042808, - 38.685945589149995, - 65.10874456900001, - 98.07789532849999, - 100.8875950405, - 110.161236582, - 115.391987949, - 116.71213655, - 111.7211774585, - 108.27795680199999, - 108.129757255, - 110.37309067449999, - 85.743917786, - 85.265274763, - 76.0306047395, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.5690842291, - 38.57771928795, - 65.10874456900001, - 98.59749835550001, - 105.192185458, - 114.791826968, - 116.498316582, - 115.188047251, - 112.651649109, - 110.8686775985, - 111.2513303135, - 114.819650396, - 87.5138396345, - 86.633555888, - 77.3027533465, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.2787359927, - 38.538240202800004, - 65.10874456900001, - 98.7478073005, - 105.6448618345, - 114.2073179835, - 120.2000820005, - 120.1826760135, - 116.3488774435, - 113.660769964, - 110.22409025649999, - 110.7940263415, - 85.860814574, - 85.2336324195, - 75.938747284, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.381135937399996, - 38.54240452135, - 65.10874456900001, - 98.8964494, - 104.971772676, - 113.45196996450001, - 112.808334487, - 110.730862691, - 110.47286564150001, - 108.7419076355, - 107.063394993, - 110.47947516699999, - 85.8226221065, - 85.40150093150001, - 76.061119959, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 33.4807738505, - 38.5839587368, - 65.10874456900001, - 98.32399629300001, - 100.73420046349999, - 103.3401641665, - 103.20998616199999, - 103.19785384, - 103.18386531850001, - 103.30484605, - 104.9144086905, - 109.98880505700001, - 85.0928493225, - 84.620337242, - 75.43954980150001, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 33.09590974065, - 29.9431309534, - 47.4068062142, - 73.965579358, - 98.2428021705, - 98.7290606095, - 98.8136112415, - 99.100191912, - 99.11592018, - 99.051610669, - 102.315212758, - 108.8351945855, - 75.3876981175, - 57.674028539999995, - 57.674028539999995, - 39.96035896245, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 29.890764529949998, - 29.6814054141, - 56.254010516499996, - 57.0191690945, - 75.239144791, - 74.426005617, - 74.0473039365, - 73.965579358, - 77.391897207, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.887797085849996, - 39.11199519165, - 65.227675254, - 98.07451971399999, - 98.4070119065, - 104.914150241, - 113.11843999550001, - 108.90842531050001, - 104.58954008699999, - 102.429212574, - 102.676059475, - 108.914773991, - 84.6082405045, - 84.2717809695, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 29.847549267799998, - 29.6814054141, - 56.864818681, - 59.06144817, - 83.27550555799999, - 86.305570895, - 84.5170160795, - 80.5233282615, - 79.280646057, - 66.539973621, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.4551328318, - 38.92142728275, - 65.273814047, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.5321134848, - 38.9631624071, - 65.153085826, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.567422785199994, - 38.9024509697, - 65.1472328495, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.3876981175, - 30.45418713595, - 16.553543950349997, - 16.553543950349997, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 34.924103483550006, - 30.0675227067, - 47.54576009865, - 73.96727002200001, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.32530984249999, - 99.2078228525, - 98.353618229, - 101.5008375635, - 108.353473262, - 75.3876981175, - 57.674028539999995, - 57.7073092475, - 40.090922950949995, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 5.6591993994, - 30.13853677225, - 29.8100812195, - 56.2519097805, - 56.2519097805, - 73.965579358, - 73.965579358, - 73.965579358, - 73.965579358, - 77.391897207, - 66.5308633285, - 48.817193751199994, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 15.938152947799999, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 16.553543950349997, - 35.3319917274, - 38.79053391875, - 65.2323684005, - 98.0753801425, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 98.07451971399999, - 101.5008375635, - 108.353473262, - 84.244532906, - 84.244532906, - 75.395445821, - 30.45418713595, - 16.553543950349997, - 16.553543950349997 - ], - "bau_critical_load_met": true, - "bau_critical_load_met_time_steps": 0, - "annual_calculated_kwh": 1.12282905e6 - }, - "Messages": { - "errors": [], - "warnings": [ - [ - "core_electric_utility.jl_187", - [ - "When using stochastic outage modeling (i.e. outage_start_time_steps, outage_durations, outage_probabilities), \n emissions and renewable energy percentage calculations and constraints do not consider outages." - ] - ], - [ - "core_reopt.jl_641", - [ - "Adding binary variable to model outages. Some solvers are very slow with integer variables", - "Adding binary variable to model outages. Some solvers are very slow with integer variables" - ] - ], - [ - "core_pv.jl_152", - [ - "PV inv_eff will be ignored because dc_coupled_with_storage=true. The inverter of the DC coupled PV and electric storage system will be defined by ElectricStorage inverter_efficiency_fraction and rectifier_efficiency_fraction.", - "PV inv_eff will be ignored because dc_coupled_with_storage=true. The inverter of the DC coupled PV and electric storage system will be defined by ElectricStorage inverter_efficiency_fraction and rectifier_efficiency_fraction." - ] - ], - [ - "src_operators.jl_279", - [ - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y.", - "The addition operator has been used on JuMP expressions a large number of times. This warning is safe to ignore but may indicate that model generation is slower than necessary. For performance reasons, you should not add expressions in a loop. Instead of x += y, use add_to_expression!(x,y) to modify x in place. If y is a single variable, you may also use add_to_expression!(x, coef, y) for x += coef*y." - ] - ] - ] - }, - "PV": [ - { - "electric_to_grid_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "production_factor_series": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0286, - 0.450571, - 0.633268, - 0.744947, - 0.793452, - 0.78297, - 0.715558, - 0.588895, - 0.40189299999999994, - 0.101677, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028162, - 0.45753699999999997, - 0.642251, - 0.754753, - 0.803629, - 0.793688, - 0.7219990000000001, - 0.595598, - 0.408476, - 0.007211, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028044, - 0.19891999999999999, - 0.646805, - 0.767886, - 0.824961, - 0.815863, - 0.748986, - 0.618642, - 0.427358, - 0.109796, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10198600000000001, - 0.46055799999999997, - 0.646065, - 0.761364, - 0.808933, - 0.798491, - 0.731373, - 0.603872, - 0.418497, - 0.107887, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027690000000000003, - 0.44222100000000003, - 0.623648, - 0.736392, - 0.784879, - 0.774659, - 0.5752849999999999, - 0.384918, - 0.407344, - 0.051701000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034294, - 0.43924, - 0.607711, - 0.49395999999999995, - 0.470439, - 0.590503, - 0.701127, - 0.582704, - 0.406561, - 0.11155, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09420300000000001, - 0.423632, - 0.5959139999999999, - 0.7097100000000001, - 0.763675, - 0.760593, - 0.702431, - 0.5813189999999999, - 0.4016, - 0.1135, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.099858, - 0.451869, - 0.6443920000000001, - 0.768126, - 0.8269099999999999, - 0.819444, - 0.75181, - 0.627075, - 0.436331, - 0.131458, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026475000000000002, - 0.205537, - 0.631447, - 0.743663, - 0.795695, - 0.788168, - 0.726307, - 0.604583, - 0.425152, - 0.137095, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04018, - 0.439099, - 0.618131, - 0.621395, - 0.559123, - 0.663237, - 0.450356, - 0.433272, - 0.25259899999999996, - 0.04169, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0039169999999999995, - 0.025873999999999998, - 0.168769, - 0.677282, - 0.745774, - 0.582485, - 0.5360069999999999, - 0.581296, - 0.369096, - 0.135547, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09023, - 0.421796, - 0.607395, - 0.726932, - 0.783492, - 0.777952, - 0.713266, - 0.5940599999999999, - 0.419165, - 0.147207, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094402, - 0.425144, - 0.6031749999999999, - 0.7110639999999999, - 0.7654890000000001, - 0.7645, - 0.7089529999999999, - 0.594789, - 0.419214, - 0.144476, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10291800000000001, - 0.443369, - 0.627301, - 0.7420359999999999, - 0.660114, - 0.556516, - 0.502782, - 0.5106539999999999, - 0.335623, - 0.16300299999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.044334000000000005, - 0.40844600000000003, - 0.581538, - 0.505087, - 0.598952, - 0.344792, - 0.696433, - 0.224176, - 0.02542, - 0.017504000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09154999999999999, - 0.40002, - 0.591764, - 0.715178, - 0.777251, - 0.7770410000000001, - 0.7196910000000001, - 0.603445, - 0.42285700000000004, - 0.15934299999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096468, - 0.403909, - 0.5793959999999999, - 0.693592, - 0.753745, - 0.585834, - 0.70137, - 0.5902000000000001, - 0.417464, - 0.16236699999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.073009, - 0.300634, - 0.329412, - 0.5555910000000001, - 0.6068490000000001, - 0.586326, - 0.375901, - 0.352163, - 0.16000399999999998, - 0.018201000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.079705, - 0.039686, - 0.182792, - 0.30805, - 0.276697, - 0.7603300000000001, - 0.70805, - 0.336334, - 0.277441, - 0.017983, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.098058, - 0.409474, - 0.606632, - 0.72363, - 0.7864650000000001, - 0.295967, - 0.053444000000000005, - 0.078268, - 0.007386, - 0.01093, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034525, - 0.169334, - 0.444776, - 0.56665, - 0.59008, - 0.608679, - 0.456737, - 0.347829, - 0.344897, - 0.182774, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.11413, - 0.428121, - 0.6001340000000001, - 0.713409, - 0.7776660000000001, - 0.7805700000000001, - 0.722752, - 0.609504, - 0.440609, - 0.182881, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10841500000000001, - 0.407538, - 0.589562, - 0.47498599999999996, - 0.598577, - 0.520196, - 0.482027, - 0.448958, - 0.284584, - 0.050682000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016729, - 0.157054, - 0.171817, - 0.261702, - 0.26113099999999995, - 0.276725, - 0.22903, - 0.07654000000000001, - 0.039643, - 0.015227000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.050504, - 0.15126699999999998, - 0.09453700000000001, - 0.163939, - 0.004285, - 0.751994, - 0.632285, - 0.448647, - 0.188441, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.100645, - 0.23713499999999998, - 0.44599500000000003, - 0.022806999999999997, - 0.5645410000000001, - 0.555473, - 0.448182, - 0.011151999999999999, - 0.418286, - 0.152155, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.125967, - 0.452179, - 0.666222, - 0.804135, - 0.833333, - 0.833333, - 0.8020309999999999, - 0.685693, - 0.493643, - 0.221669, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.149752, - 0.466714, - 0.659509, - 0.782608, - 0.833333, - 0.833333, - 0.779763, - 0.65934, - 0.479859, - 0.22078, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.149283, - 0.458294, - 0.637745, - 0.7479389999999999, - 0.797717, - 0.792046, - 0.561855, - 0.534002, - 0.260548, - 0.070947, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.044878999999999995, - 0.430502, - 0.616332, - 0.598413, - 0.643923, - 0.632186, - 0.5630850000000001, - 0.47594200000000003, - 0.33596499999999996, - 0.10489, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022372, - 0.260567, - 0.429184, - 0.832736, - 0.833333, - 0.780323, - 0.66086, - 0.482171, - 0.18476900000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10989, - 0.388042, - 0.584493, - 0.701311, - 0.760602, - 0.772002, - 0.7273310000000001, - 0.626444, - 0.457374, - 0.200685, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.15815, - 0.461204, - 0.650505, - 0.638783, - 0.667528, - 0.623993, - 0.761259, - 0.6451319999999999, - 0.479234, - 0.23832, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.173528, - 0.46302, - 0.6451699999999999, - 0.7592369999999999, - 0.815883, - 0.812612, - 0.753826, - 0.644084, - 0.478806, - 0.240957, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.164988, - 0.44464499999999996, - 0.6259880000000001, - 0.746251, - 0.803201, - 0.802269, - 0.743349, - 0.632984, - 0.468763, - 0.23313, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036122, - 0.217928, - 0.364184, - 0.5746359999999999, - 0.623495, - 0.5682590000000001, - 0.472519, - 0.459391, - 0.275068, - 0.086787, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.16855099999999998, - 0.43074799999999996, - 0.5974400000000001, - 0.71784, - 0.782592, - 0.790762, - 0.621947, - 0.512969, - 0.378907, - 0.15110900000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08886100000000001, - 0.30909800000000004, - 0.44502600000000003, - 0.539613, - 0.660063, - 0.516105, - 0.483675, - 0.375995, - 0.34377199999999997, - 0.13292099999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.077481, - 0.183764, - 0.364105, - 0.368695, - 0.294676, - 0.5210359999999999, - 0.5571889999999999, - 0.32177, - 0.28090899999999996, - 0.081801, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.15431, - 0.29091300000000003, - 0.43531200000000003, - 0.45634399999999997, - 0.5829500000000001, - 0.148619, - 0.16697800000000002, - 0.09240999999999999, - 0.076974, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020406, - 0.177107, - 0.077952, - 0.179719, - 0.512512, - 0.47045499999999996, - 0.522221, - 0.4382, - 0.348827, - 0.047588, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.426782, - 0.619888, - 0.7427630000000001, - 0.813002, - 0.8206509999999999, - 0.764043, - 0.65728, - 0.48028899999999997, - 0.23641, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.159789, - 0.41400200000000004, - 0.383481, - 0.7319880000000001, - 0.801713, - 0.8031459999999999, - 0.7624529999999999, - 0.6487050000000001, - 0.473391, - 0.012986000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.182844, - 0.444467, - 0.6377200000000001, - 0.307536, - 0.821686, - 0.82773, - 0.776646, - 0.6681739999999999, - 0.379492, - 0.244171, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.19666, - 0.4618, - 0.649791, - 0.778346, - 0.833333, - 0.833333, - 0.7903640000000001, - 0.674843, - 0.503323, - 0.261649, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.063964, - 0.46842399999999995, - 0.6415599999999999, - 0.753082, - 0.81137, - 0.8115950000000001, - 0.753113, - 0.6421979999999999, - 0.477145, - 0.250693, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.202893, - 0.44939999999999997, - 0.628192, - 0.7456470000000001, - 0.806683, - 0.810988, - 0.75764, - 0.646557, - 0.48032400000000003, - 0.24621700000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.1977, - 0.44957100000000005, - 0.632799, - 0.75189, - 0.811101, - 0.8096230000000001, - 0.753838, - 0.640026, - 0.388192, - 0.047199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.053673, - 0.270929, - 0.339274, - 0.450962, - 0.373411, - 0.21321, - 0.46469299999999997, - 0.467673, - 0.352525, - 0.161339, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025070000000000002, - 0.01982, - 0.026404, - 0.092708, - 0.593568, - 0.48880399999999996, - 0.646008, - 0.48217899999999997, - 0.250653, - 0.006632, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.20622300000000002, - 0.452774, - 0.62728, - 0.739916, - 0.801964, - 0.8072630000000001, - 0.7589349999999999, - 0.657741, - 0.488255, - 0.261502, - 0.009914, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.196677, - 0.43737200000000004, - 0.602696, - 0.7128479999999999, - 0.783792, - 0.797941, - 0.7564160000000001, - 0.655254, - 0.493145, - 0.26468, - 0.012121999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.195046, - 0.13467400000000002, - 0.126432, - 0.08637099999999999, - 0.4903, - 0.6004619999999999, - 0.547961, - 0.42044600000000004, - 0.32540199999999997, - 0.15460300000000002, - 0.0016979999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.234482, - 0.504428, - 0.693958, - 0.819987, - 0.833333, - 0.833333, - 0.833333, - 0.726069, - 0.545953, - 0.29538600000000004, - 0.007253999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.235769, - 0.493041, - 0.6696660000000001, - 0.783592, - 0.826952, - 0.813374, - 0.749607, - 0.651683, - 0.503247, - 0.280216, - 0.007592, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.223576, - 0.470523, - 0.6536109999999999, - 0.7803089999999999, - 0.833333, - 0.833333, - 0.591489, - 0.10359900000000001, - 0.031994, - 0.05282, - 0.015186, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.218893, - 0.46704399999999996, - 0.640811, - 0.762932, - 0.828513, - 0.833333, - 0.7819109999999999, - 0.674176, - 0.50845, - 0.273312, - 0.021475, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003749, - 0.492428, - 0.6835800000000001, - 0.6376040000000001, - 0.651986, - 0.833333, - 0.8287859999999999, - 0.711244, - 0.041110999999999995, - 0.049970999999999995, - 0.002016, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.248348, - 0.50992, - 0.695159, - 0.8175549999999999, - 0.833333, - 0.833333, - 0.833333, - 0.7190700000000001, - 0.542566, - 0.006356, - 0.0149, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025703, - 0.28707, - 0.22825299999999998, - 0.31976499999999997, - 0.484998, - 0.068646, - 0.47113, - 0.28612400000000004, - 0.080551, - 0.121452, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.065211, - 0.270589, - 0.34073899999999996, - 0.43450700000000003, - 0.564427, - 0.470264, - 0.440012, - 0.303741, - 0.20243799999999998, - 0.08629, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.000625, - 0.10296599999999999, - 0.274528, - 0.43856799999999996, - 0.6285890000000001, - 0.64235, - 0.6104959999999999, - 0.69977, - 0.5169210000000001, - 0.294677, - 0.117826, - 0.003814, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004866, - 0.23189099999999999, - 0.467852, - 0.439327, - 0.595376, - 0.635923, - 0.66084, - 0.491358, - 0.429028, - 0.481851, - 0.260872, - 0.025587, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006404, - 0.23831899999999998, - 0.468815, - 0.621392, - 0.729179, - 0.512265, - 0.7930119999999999, - 0.745931, - 0.522497, - 0.478852, - 0.125235, - 0.025823, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0023239999999999997, - 0.110476, - 0.26891000000000004, - 0.34832, - 0.735032, - 0.7888780000000001, - 0.626105, - 0.7520209999999999, - 0.644224, - 0.47677600000000003, - 0.258363, - 0.027822, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014503, - 0.248988, - 0.491815, - 0.6668529999999999, - 0.631985, - 0.66659, - 0.59104, - 0.587684, - 0.5590170000000001, - 0.390397, - 0.27675700000000003, - 0.0071070000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020686, - 0.26943599999999995, - 0.512773, - 0.6897960000000001, - 0.801706, - 0.833333, - 0.833333, - 0.784597, - 0.674201, - 0.508015, - 0.21973900000000002, - 0.023818000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00929, - 0.193048, - 0.490407, - 0.656295, - 0.763794, - 0.805766, - 0.783956, - 0.7152000000000001, - 0.624163, - 0.366973, - 0.205098, - 0.032366, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022431999999999997, - 0.257743, - 0.366151, - 0.652868, - 0.765331, - 0.8191269999999999, - 0.815251, - 0.763028, - 0.6505259999999999, - 0.48769999999999997, - 0.26577300000000004, - 0.03592, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022263, - 0.155226, - 0.333334, - 0.681357, - 0.642654, - 0.622414, - 0.6835019999999999, - 0.557971, - 0.494259, - 0.314836, - 0.19498, - 0.025546, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027193000000000002, - 0.266175, - 0.5036809999999999, - 0.675987, - 0.791523, - 0.833333, - 0.833333, - 0.7767229999999999, - 0.6628390000000001, - 0.49724599999999997, - 0.27077300000000004, - 0.039682, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.029364, - 0.263062, - 0.49554000000000004, - 0.665284, - 0.7763880000000001, - 0.831767, - 0.833333, - 0.776888, - 0.663154, - 0.49977699999999997, - 0.27498500000000003, - 0.042381999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034777, - 0.272615, - 0.500659, - 0.6572709999999999, - 0.754832, - 0.803843, - 0.802212, - 0.753706, - 0.6511849999999999, - 0.49210899999999996, - 0.27166500000000005, - 0.042554, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036937, - 0.272994, - 0.508205, - 0.674024, - 0.788607, - 0.833333, - 0.8306549999999999, - 0.774006, - 0.656318, - 0.49120199999999997, - 0.26981700000000003, - 0.04192, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035573, - 0.258268, - 0.480442, - 0.625922, - 0.727953, - 0.766827, - 0.7822100000000001, - 0.740966, - 0.6431950000000001, - 0.49036, - 0.274265, - 0.044278, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043862000000000005, - 0.28632799999999997, - 0.519708, - 0.687342, - 0.801947, - 0.833333, - 0.833333, - 0.796066, - 0.684133, - 0.458973, - 0.199952, - 0.034779000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.046604, - 0.29249200000000003, - 0.532813, - 0.701804, - 0.8111240000000001, - 0.833333, - 0.833333, - 0.7815610000000001, - 0.671753, - 0.5065930000000001, - 0.284866, - 0.048066000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.048201999999999995, - 0.293671, - 0.5304869999999999, - 0.694885, - 0.803686, - 0.833333, - 0.833333, - 0.7690710000000001, - 0.65273, - 0.49297399999999997, - 0.277183, - 0.047128, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020489999999999998, - 0.159672, - 0.297165, - 0.609066, - 0.676987, - 0.642823, - 0.636871, - 0.605011, - 0.443596, - 0.481607, - 0.26773, - 0.045341, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.048548, - 0.27296, - 0.489988, - 0.647985, - 0.748813, - 0.8024439999999999, - 0.8025789999999999, - 0.751006, - 0.6422720000000001, - 0.47753300000000004, - 0.258759, - 0.042466000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.048032, - 0.263108, - 0.477387, - 0.626881, - 0.70925, - 0.7532530000000001, - 0.7694719999999999, - 0.7346670000000001, - 0.63935, - 0.479748, - 0.26255900000000004, - 0.044708, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052124000000000004, - 0.274038, - 0.36294099999999996, - 0.476195, - 0.705324, - 0.656172, - 0.6397569999999999, - 0.572809, - 0.531555, - 0.461238, - 0.18224100000000001, - 0.033141, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.050497999999999994, - 0.264375, - 0.351066, - 0.5514819999999999, - 0.745287, - 0.7885650000000001, - 0.7804439999999999, - 0.717212, - 0.434625, - 0.404483, - 0.19178399999999998, - 0.042551, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052564, - 0.267226, - 0.47595800000000005, - 0.630185, - 0.7523869999999999, - 0.8087409999999999, - 0.80862, - 0.653411, - 0.6360990000000001, - 0.47718299999999997, - 0.256821, - 0.04431, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059616999999999996, - 0.290353, - 0.5164500000000001, - 0.682253, - 0.797115, - 0.833333, - 0.16717400000000002, - 0.45448099999999997, - 0.46339199999999997, - 0.29006099999999996, - 0.10355299999999999, - 0.046447, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059647, - 0.29149400000000003, - 0.513788, - 0.673314, - 0.769463, - 0.813923, - 0.8218840000000001, - 0.76376, - 0.654168, - 0.486163, - 0.110514, - 0.047460999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.060957, - 0.279205, - 0.487477, - 0.634207, - 0.7255739999999999, - 0.6654990000000001, - 0.664925, - 0.60641, - 0.559984, - 0.45113, - 0.24507900000000002, - 0.045424, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.061514000000000006, - 0.158634, - 0.34015300000000004, - 0.626716, - 0.743757, - 0.7635510000000001, - 0.576456, - 0.615402, - 0.624807, - 0.430882, - 0.166222, - 0.032039, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07167799999999999, - 0.320742, - 0.547427, - 0.710536, - 0.817975, - 0.833333, - 0.833333, - 0.792452, - 0.676607, - 0.5065919999999999, - 0.27848399999999995, - 0.049923, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06979600000000001, - 0.299483, - 0.5156040000000001, - 0.672848, - 0.783323, - 0.833333, - 0.833333, - 0.781905, - 0.670515, - 0.49901, - 0.0035600000000000002, - 0.001519, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076033, - 0.325241, - 0.555669, - 0.7183440000000001, - 0.828828, - 0.833333, - 0.833333, - 0.8065650000000001, - 0.683909, - 0.5125149999999999, - 0.27913299999999996, - 0.051022, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07630500000000001, - 0.317442, - 0.534298, - 0.690827, - 0.788548, - 0.828337, - 0.812378, - 0.618195, - 0.6447459999999999, - 0.484323, - 0.267463, - 0.049756999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07509199999999999, - 0.295948, - 0.409665, - 0.5080330000000001, - 0.700648, - 0.754485, - 0.7657820000000001, - 0.722059, - 0.6255620000000001, - 0.46718200000000004, - 0.25702600000000003, - 0.049191000000000006, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.077741, - 0.301195, - 0.332797, - 0.548603, - 0.757414, - 0.8126749999999999, - 0.8148029999999999, - 0.760481, - 0.650139, - 0.488832, - 0.26615300000000003, - 0.051476, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081947, - 0.31866500000000003, - 0.542439, - 0.707737, - 0.8066409999999999, - 0.833333, - 0.833333, - 0.79441, - 0.6744969999999999, - 0.294969, - 0.266897, - 0.053130000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.086087, - 0.322366, - 0.544869, - 0.707036, - 0.818068, - 0.833333, - 0.833333, - 0.781256, - 0.664436, - 0.493467, - 0.266914, - 0.05339, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.087821, - 0.32359, - 0.5374439999999999, - 0.691071, - 0.782223, - 0.81831, - 0.801588, - 0.740737, - 0.635092, - 0.48212900000000003, - 0.265005, - 0.052945, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.065011, - 0.30724, - 0.505894, - 0.6535359999999999, - 0.754046, - 0.80425, - 0.799144, - 0.743028, - 0.6292490000000001, - 0.46536500000000003, - 0.257074, - 0.050731, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.087405, - 0.30928300000000003, - 0.508621, - 0.6600090000000001, - 0.756638, - 0.8083859999999999, - 0.808361, - 0.753652, - 0.640535, - 0.471777, - 0.232572, - 0.045505000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09006399999999999, - 0.322381, - 0.529067, - 0.6774049999999999, - 0.7831319999999999, - 0.833333, - 0.831739, - 0.769178, - 0.653711, - 0.489156, - 0.267332, - 0.051216, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.318284, - 0.296548, - 0.688505, - 0.131945, - 0.40971199999999997, - 0.833333, - 0.775517, - 0.552646, - 0.324836, - 0.052094, - 0.001581, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.093538, - 0.32006999999999997, - 0.296445, - 0.6869059999999999, - 0.787072, - 0.833271, - 0.690156, - 0.75807, - 0.35645, - 0.170287, - 0.145337, - 0.030512, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.31214600000000003, - 0.530008, - 0.144901, - 0.017404, - 0.057464, - 0.02689, - 0.10618899999999999, - 0.104592, - 0.19900700000000002, - 0.06780599999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06933299999999999, - 0.342296, - 0.558711, - 0.7151430000000001, - 0.809067, - 0.833333, - 0.833333, - 0.772605, - 0.654187, - 0.490548, - 0.26618400000000003, - 0.049963, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0012330000000000002, - 0.09572, - 0.321052, - 0.5200220000000001, - 0.65449, - 0.728992, - 0.757262, - 0.762134, - 0.719857, - 0.620426, - 0.46901600000000004, - 0.253298, - 0.050327, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0016690000000000001, - 0.09465900000000001, - 0.31650599999999995, - 0.510839, - 0.647573, - 0.7342380000000001, - 0.7676499999999999, - 0.749907, - 0.70039, - 0.6027250000000001, - 0.454475, - 0.248599, - 0.049688, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002056, - 0.092822, - 0.314685, - 0.50071, - 0.627832, - 0.704061, - 0.742521, - 0.7506520000000001, - 0.709469, - 0.6083970000000001, - 0.456293, - 0.249084, - 0.04615, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004171, - 0.079361, - 0.312446, - 0.505381, - 0.5305059999999999, - 0.6073970000000001, - 0.768773, - 0.758687, - 0.707098, - 0.602851, - 0.451488, - 0.196221, - 0.046654, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00368, - 0.09466, - 0.31739999999999996, - 0.5110779999999999, - 0.641614, - 0.718328, - 0.7459199999999999, - 0.7219439999999999, - 0.656686, - 0.561312, - 0.423359, - 0.228249, - 0.047985, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0031160000000000003, - 0.09451000000000001, - 0.296693, - 0.48783800000000005, - 0.626103, - 0.7262540000000001, - 0.7552960000000001, - 0.730158, - 0.6605030000000001, - 0.552884, - 0.423077, - 0.234292, - 0.043821, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003677, - 0.095359, - 0.31258600000000003, - 0.494859, - 0.622539, - 0.699718, - 0.727936, - 0.7180639999999999, - 0.668481, - 0.574665, - 0.433135, - 0.237929, - 0.045067, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003932, - 0.095683, - 0.307305, - 0.48436, - 0.618182, - 0.715095, - 0.757069, - 0.752592, - 0.699485, - 0.595964, - 0.440961, - 0.24171299999999998, - 0.047500999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004831, - 0.102782, - 0.320268, - 0.511568, - 0.645338, - 0.736718, - 0.780067, - 0.771028, - 0.7257100000000001, - 0.616525, - 0.462174, - 0.253173, - 0.049109, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0065190000000000005, - 0.066915, - 0.314789, - 0.487471, - 0.6466580000000001, - 0.62102, - 0.356428, - 0.425276, - 0.453667, - 0.15556999999999999, - 0.141686, - 0.0891, - 0.023103000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.077063, - 0.22902, - 0.30123300000000003, - 0.35945499999999997, - 0.16671100000000003, - 0.455053, - 0.591701, - 0.5196029999999999, - 0.295059, - 0.328498, - 0.182773, - 0.046209, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006555, - 0.100576, - 0.321745, - 0.516317, - 0.65977, - 0.753534, - 0.7979740000000001, - 0.791191, - 0.350196, - 0.44869099999999995, - 0.18113900000000002, - 0.102381, - 0.017366, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008257, - 0.106676, - 0.332041, - 0.5264310000000001, - 0.663759, - 0.753968, - 0.789001, - 0.767882, - 0.705055, - 0.5944210000000001, - 0.445972, - 0.23931200000000002, - 0.0505, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008976000000000001, - 0.107257, - 0.32126499999999997, - 0.5135080000000001, - 0.654913, - 0.748992, - 0.775543, - 0.74678, - 0.6782, - 0.569312, - 0.42905, - 0.236399, - 0.048375, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010291, - 0.108006, - 0.31831099999999996, - 0.505023, - 0.638344, - 0.7184769999999999, - 0.7381449999999999, - 0.713146, - 0.660882, - 0.564436, - 0.424891, - 0.229594, - 0.051271000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010466, - 0.10596599999999999, - 0.310052, - 0.481008, - 0.612304, - 0.703692, - 0.747678, - 0.74293, - 0.6925560000000001, - 0.584621, - 0.430902, - 0.242638, - 0.04711, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010247, - 0.104661, - 0.324788, - 0.512518, - 0.644531, - 0.726992, - 0.750174, - 0.716337, - 0.652427, - 0.572123, - 0.433572, - 0.23425, - 0.046297, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011493, - 0.104272, - 0.31566500000000003, - 0.49829199999999996, - 0.623115, - 0.701994, - 0.725149, - 0.6996140000000001, - 0.654077, - 0.568095, - 0.42760000000000004, - 0.22891999999999998, - 0.048407, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010798, - 0.10084, - 0.30776299999999995, - 0.488156, - 0.612795, - 0.69465, - 0.720113, - 0.703209, - 0.640765, - 0.549727, - 0.410707, - 0.221828, - 0.049038, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012454, - 0.10273499999999999, - 0.29896100000000003, - 0.462991, - 0.5818289999999999, - 0.673712, - 0.715769, - 0.713335, - 0.662376, - 0.566331, - 0.421135, - 0.22682400000000003, - 0.050051000000000005, - 0.000265, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013356, - 0.10736, - 0.315653, - 0.475482, - 0.547633, - 0.649818, - 0.649512, - 0.755608, - 0.697936, - 0.478663, - 0.39053699999999997, - 0.211218, - 0.052392, - 0.000885, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017774, - 0.114646, - 0.269629, - 0.455324, - 0.634439, - 0.718846, - 0.765439, - 0.26036200000000004, - 0.315164, - 0.609187, - 0.455052, - 0.18510400000000002, - 0.061958, - 0.0011120000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021055, - 0.120321, - 0.326667, - 0.249369, - 0.6607000000000001, - 0.7526860000000001, - 0.796169, - 0.695712, - 0.331509, - 0.07050100000000001, - 0.382584, - 0.186471, - 0.050327, - 0.002114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016376, - 0.114142, - 0.334106, - 0.523788, - 0.46036, - 0.743443, - 0.774518, - 0.7570990000000001, - 0.48442599999999997, - 0.47536399999999995, - 0.429522, - 0.23114099999999999, - 0.053783000000000004, - 0.001906, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017890999999999997, - 0.11111199999999999, - 0.305196, - 0.478737, - 0.6079049999999999, - 0.6958719999999999, - 0.740216, - 0.733753, - 0.680134, - 0.57128, - 0.422783, - 0.22766499999999998, - 0.060482999999999995, - 0.001453, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02252, - 0.118865, - 0.309426, - 0.489388, - 0.6264160000000001, - 0.72094, - 0.765513, - 0.758164, - 0.696181, - 0.592469, - 0.43827499999999997, - 0.234696, - 0.054144, - 0.002975, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020886, - 0.115802, - 0.315673, - 0.494723, - 0.63, - 0.7193780000000001, - 0.760879, - 0.752655, - 0.6970230000000001, - 0.592936, - 0.4432, - 0.23829599999999998, - 0.050184, - 0.003494, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01805, - 0.113789, - 0.322474, - 0.506938, - 0.6386000000000001, - 0.7380220000000001, - 0.7788529999999999, - 0.767454, - 0.707477, - 0.599621, - 0.447622, - 0.24037899999999998, - 0.049343000000000005, - 0.002857, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017647, - 0.11895900000000001, - 0.351456, - 0.5451950000000001, - 0.6781309999999999, - 0.758325, - 0.792749, - 0.776025, - 0.710465, - 0.606226, - 0.45502699999999996, - 0.24554900000000002, - 0.053021, - 0.0037949999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021425999999999997, - 0.11785899999999999, - 0.33396499999999996, - 0.520678, - 0.652086, - 0.738655, - 0.77783, - 0.768207, - 0.708399, - 0.603823, - 0.451034, - 0.244024, - 0.056997, - 0.0046, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025890999999999997, - 0.121327, - 0.32797000000000004, - 0.517463, - 0.656903, - 0.74773, - 0.787175, - 0.683625, - 0.145391, - 0.449699, - 0.448711, - 0.241917, - 0.059165, - 0.004690000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024353000000000003, - 0.116798, - 0.319142, - 0.502363, - 0.6362279999999999, - 0.721268, - 0.762564, - 0.753633, - 0.701221, - 0.594227, - 0.360646, - 0.212177, - 0.060020000000000004, - 0.006011, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023062000000000003, - 0.115385, - 0.318305, - 0.508492, - 0.649561, - 0.744592, - 0.787408, - 0.780338, - 0.716335, - 0.610981, - 0.456218, - 0.245863, - 0.053357999999999996, - 0.004723, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018521999999999997, - 0.11134999999999999, - 0.325488, - 0.507606, - 0.630612, - 0.700866, - 0.728102, - 0.714431, - 0.666462, - 0.568956, - 0.429075, - 0.23388399999999998, - 0.047885, - 0.004823, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018206, - 0.110859, - 0.326323, - 0.508023, - 0.63478, - 0.713638, - 0.7416079999999999, - 0.72251, - 0.6599729999999999, - 0.5539189999999999, - 0.419891, - 0.23247800000000002, - 0.049087000000000006, - 0.004857, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018628, - 0.107973, - 0.315065, - 0.490662, - 0.616642, - 0.689198, - 0.711938, - 0.687785, - 0.6243920000000001, - 0.5432359999999999, - 0.41836399999999996, - 0.22775299999999998, - 0.050698, - 0.005151, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018358, - 0.105473, - 0.303141, - 0.469229, - 0.596981, - 0.684713, - 0.72653, - 0.722366, - 0.670046, - 0.569789, - 0.426495, - 0.230902, - 0.048235, - 0.005031, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017026, - 0.105659, - 0.310141, - 0.476236, - 0.59358, - 0.669273, - 0.698151, - 0.688505, - 0.635335, - 0.545533, - 0.414512, - 0.225163, - 0.051445, - 0.005476, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020076, - 0.104229, - 0.297725, - 0.46619, - 0.588707, - 0.6781739999999999, - 0.717313, - 0.714263, - 0.663059, - 0.565624, - 0.42561200000000005, - 0.232578, - 0.047889, - 0.005946, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017606, - 0.105719, - 0.238644, - 0.491149, - 0.6243139999999999, - 0.560535, - 0.7503329999999999, - 0.7383970000000001, - 0.6829080000000001, - 0.583312, - 0.435453, - 0.236799, - 0.050226999999999994, - 0.006876999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022439, - 0.111043, - 0.32108800000000004, - 0.5059870000000001, - 0.639225, - 0.7277659999999999, - 0.766937, - 0.757749, - 0.703331, - 0.598426, - 0.44866500000000004, - 0.243835, - 0.050792000000000004, - 0.007489, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026583, - 0.116976, - 0.31985800000000003, - 0.503658, - 0.639937, - 0.731346, - 0.76786, - 0.7583289999999999, - 0.699305, - 0.593778, - 0.44572, - 0.241714, - 0.05638, - 0.00869, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025828, - 0.113846, - 0.309731, - 0.48231599999999997, - 0.603705, - 0.689261, - 0.72146, - 0.709804, - 0.661774, - 0.56584, - 0.428647, - 0.236154, - 0.052384, - 0.008686999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02186, - 0.107363, - 0.304884, - 0.47581, - 0.59627, - 0.677749, - 0.707368, - 0.692353, - 0.641794, - 0.5492480000000001, - 0.41504399999999997, - 0.227178, - 0.055352, - 0.008679000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022837, - 0.108329, - 0.297632, - 0.465415, - 0.591086, - 0.6747989999999999, - 0.712321, - 0.704955, - 0.513889, - 0.55824, - 0.41801, - 0.211184, - 0.060215000000000005, - 0.009994999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027086, - 0.10156399999999999, - 0.300896, - 0.47039299999999995, - 0.5929829999999999, - 0.675374, - 0.7154389999999999, - 0.7067680000000001, - 0.656062, - 0.561526, - 0.420931, - 0.23238499999999998, - 0.056902, - 0.01016, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026749, - 0.099407, - 0.22459, - 0.24485200000000001, - 0.5129360000000001, - 0.594277, - 0.499435, - 0.34096499999999996, - 0.113253, - 0.389322, - 0.17610800000000001, - 0.232566, - 0.058821, - 0.01137, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024446000000000002, - 0.10292, - 0.288817, - 0.470563, - 0.587526, - 0.6634479999999999, - 0.711379, - 0.6465850000000001, - 0.47048700000000004, - 0.480901, - 0.383762, - 0.194849, - 0.063973, - 0.011786, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022508, - 0.095442, - 0.233078, - 0.209598, - 0.457675, - 0.538803, - 0.615423, - 0.601993, - 0.558013, - 0.272806, - 0.23549199999999998, - 0.155949, - 0.056026000000000006, - 0.011869999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024080999999999998, - 0.104823, - 0.28908100000000003, - 0.456069, - 0.580834, - 0.6550900000000001, - 0.6732630000000001, - 0.647371, - 0.594966, - 0.51464, - 0.393495, - 0.216064, - 0.055954000000000004, - 0.012646000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022435, - 0.099913, - 0.288506, - 0.454903, - 0.576324, - 0.660193, - 0.700664, - 0.6987089999999999, - 0.650706, - 0.5555789999999999, - 0.417808, - 0.232491, - 0.056086, - 0.012664, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019122, - 0.062392, - 0.166643, - 0.126191, - 0.155042, - 0.553751, - 0.47687799999999997, - 0.709415, - 0.6657759999999999, - 0.45122, - 0.430092, - 0.239257, - 0.069127, - 0.013733, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025147, - 0.104072, - 0.302836, - 0.485308, - 0.618636, - 0.707659, - 0.7501230000000001, - 0.74401, - 0.6906680000000001, - 0.587548, - 0.44193400000000005, - 0.243698, - 0.060195, - 0.014825, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023091999999999998, - 0.107852, - 0.32506799999999997, - 0.514827, - 0.65712, - 0.7487910000000001, - 0.790323, - 0.781319, - 0.718595, - 0.6122340000000001, - 0.461611, - 0.25816300000000003, - 0.059158999999999996, - 0.014372, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02091, - 0.10786499999999999, - 0.329336, - 0.524165, - 0.662985, - 0.7509600000000001, - 0.7790929999999999, - 0.731245, - 0.706564, - 0.601442, - 0.45377999999999996, - 0.251438, - 0.057115, - 0.013441000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020297, - 0.103196, - 0.310813, - 0.49312900000000004, - 0.615524, - 0.6908529999999999, - 0.721373, - 0.705028, - 0.6469, - 0.546747, - 0.417009, - 0.238565, - 0.055630000000000006, - 0.014894000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021984, - 0.10004600000000001, - 0.301289, - 0.476923, - 0.600129, - 0.6742630000000001, - 0.7013550000000001, - 0.6875439999999999, - 0.6399969999999999, - 0.553538, - 0.422827, - 0.239673, - 0.058202, - 0.014279, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020905, - 0.096807, - 0.29156, - 0.46563099999999996, - 0.595129, - 0.68424, - 0.727169, - 0.724508, - 0.676852, - 0.579286, - 0.438503, - 0.246951, - 0.058277, - 0.014452999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020978, - 0.103711, - 0.30124900000000004, - 0.492296, - 0.60519, - 0.691808, - 0.756122, - 0.749417, - 0.693576, - 0.59278, - 0.446956, - 0.251482, - 0.059522, - 0.016097999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024692, - 0.101509, - 0.306178, - 0.486923, - 0.61805, - 0.706105, - 0.746726, - 0.740161, - 0.685342, - 0.58361, - 0.440013, - 0.247858, - 0.05823, - 0.015413999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022692, - 0.099591, - 0.301002, - 0.475352, - 0.5918049999999999, - 0.65971, - 0.677968, - 0.6659660000000001, - 0.631185, - 0.552614, - 0.422991, - 0.240372, - 0.062121, - 0.016402999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0237, - 0.097289, - 0.289606, - 0.455368, - 0.58065, - 0.666376, - 0.7064539999999999, - 0.702767, - 0.653768, - 0.559735, - 0.418342, - 0.237709, - 0.06417199999999999, - 0.015298, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022382000000000003, - 0.094915, - 0.292767, - 0.47190899999999997, - 0.603071, - 0.690392, - 0.73129, - 0.726989, - 0.676063, - 0.57801, - 0.43747, - 0.248535, - 0.060649, - 0.015957000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02445, - 0.098259, - 0.294391, - 0.469688, - 0.592923, - 0.667273, - 0.693997, - 0.684228, - 0.640695, - 0.555057, - 0.424647, - 0.243791, - 0.06313, - 0.017103999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023622, - 0.096822, - 0.293751, - 0.468892, - 0.587795, - 0.6554, - 0.683688, - 0.675655, - 0.635104, - 0.55223, - 0.422313, - 0.24165899999999998, - 0.064717, - 0.017035, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028225999999999998, - 0.101655, - 0.285871, - 0.454168, - 0.573444, - 0.655255, - 0.696434, - 0.694153, - 0.6463289999999999, - 0.549381, - 0.419748, - 0.23971199999999998, - 0.063885, - 0.016486, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023583, - 0.096449, - 0.28380700000000003, - 0.455216, - 0.573911, - 0.652087, - 0.6845330000000001, - 0.682194, - 0.640356, - 0.5502910000000001, - 0.41918900000000003, - 0.239277, - 0.062779, - 0.015814, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023014, - 0.09371800000000001, - 0.288, - 0.461893, - 0.587114, - 0.6716599999999999, - 0.712399, - 0.70778, - 0.658431, - 0.564304, - 0.429375, - 0.24572, - 0.061926, - 0.016263000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020762, - 0.089423, - 0.283757, - 0.455029, - 0.577249, - 0.66112, - 0.701744, - 0.6999059999999999, - 0.653766, - 0.561375, - 0.427478, - 0.24587399999999998, - 0.062351, - 0.016157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019960000000000002, - 0.08870600000000001, - 0.281314, - 0.450772, - 0.571198, - 0.638492, - 0.6862569999999999, - 0.6919109999999999, - 0.647716, - 0.558225, - 0.414401, - 0.236504, - 0.062818, - 0.015049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021803999999999997, - 0.088122, - 0.247201, - 0.406413, - 0.56886, - 0.650404, - 0.6825370000000001, - 0.679723, - 0.563136, - 0.500325, - 0.372995, - 0.20285599999999998, - 0.066905, - 0.016215, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022018999999999997, - 0.091596, - 0.25647699999999996, - 0.41759199999999996, - 0.541029, - 0.6669039999999999, - 0.686589, - 0.666661, - 0.650298, - 0.572316, - 0.436123, - 0.251766, - 0.063527, - 0.015615, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021318, - 0.08708199999999999, - 0.267414, - 0.42529, - 0.5441609999999999, - 0.626165, - 0.666723, - 0.662829, - 0.616031, - 0.339106, - 0.200223, - 0.23109100000000002, - 0.06683599999999999, - 0.017179, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020723, - 0.08841800000000001, - 0.269378, - 0.438927, - 0.559154, - 0.644154, - 0.684859, - 0.684685, - 0.639729, - 0.550276, - 0.418878, - 0.241939, - 0.066716, - 0.016861, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02183, - 0.09173, - 0.287225, - 0.468626, - 0.6022029999999999, - 0.695561, - 0.7390030000000001, - 0.7332150000000001, - 0.6812, - 0.583902, - 0.443425, - 0.255988, - 0.065438, - 0.016097, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023462, - 0.093066, - 0.29536399999999996, - 0.474477, - 0.594953, - 0.6665639999999999, - 0.7020639999999999, - 0.7018, - 0.660861, - 0.5749460000000001, - 0.441888, - 0.256538, - 0.065402, - 0.015889, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019271, - 0.085837, - 0.282464, - 0.453672, - 0.570973, - 0.655236, - 0.700911, - 0.703828, - 0.6606449999999999, - 0.5709890000000001, - 0.43703800000000004, - 0.255383, - 0.062399, - 0.012121999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015525, - 0.083098, - 0.29074500000000003, - 0.471264, - 0.5941620000000001, - 0.666476, - 0.706287, - 0.70486, - 0.659653, - 0.572145, - 0.440029, - 0.256063, - 0.063881, - 0.012581, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015458, - 0.08371899999999999, - 0.292272, - 0.476039, - 0.604306, - 0.686845, - 0.728879, - 0.7254980000000001, - 0.67747, - 0.5848369999999999, - 0.449019, - 0.26106999999999997, - 0.06397800000000001, - 0.012060000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014923, - 0.084548, - 0.290361, - 0.467714, - 0.5809439999999999, - 0.650807, - 0.6858609999999999, - 0.683898, - 0.6411330000000001, - 0.556585, - 0.430581, - 0.250658, - 0.061438, - 0.011205999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014752000000000001, - 0.083088, - 0.27992, - 0.444704, - 0.5475570000000001, - 0.625011, - 0.542512, - 0.667587, - 0.604707, - 0.522306, - 0.39812200000000003, - 0.23974299999999998, - 0.070262, - 0.016050000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019957, - 0.08533299999999999, - 0.259551, - 0.423283, - 0.541607, - 0.622212, - 0.660265, - 0.6567609999999999, - 0.54818, - 0.537731, - 0.411678, - 0.23780500000000002, - 0.06890500000000001, - 0.016466, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025300999999999997, - 0.09675199999999999, - 0.255707, - 0.41941199999999995, - 0.539602, - 0.62264, - 0.666414, - 0.576126, - 0.5447540000000001, - 0.5365270000000001, - 0.409919, - 0.239778, - 0.07345600000000001, - 0.018277, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019161, - 0.084047, - 0.268942, - 0.444732, - 0.5724629999999999, - 0.661275, - 0.7041689999999999, - 0.70201, - 0.660876, - 0.569911, - 0.435745, - 0.252776, - 0.063846, - 0.012654, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015596, - 0.079602, - 0.275878, - 0.45825099999999996, - 0.589977, - 0.67836, - 0.722074, - 0.720493, - 0.672778, - 0.578997, - 0.444415, - 0.26076299999999997, - 0.067411, - 0.012289999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017902, - 0.08257099999999999, - 0.270924, - 0.444865, - 0.567483, - 0.652158, - 0.696374, - 0.695039, - 0.651436, - 0.561582, - 0.424255, - 0.250003, - 0.07804000000000001, - 0.018463, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018394999999999998, - 0.068333, - 0.220519, - 0.175357, - 0.488813, - 0.5133110000000001, - 0.460078, - 0.499653, - 0.469571, - 0.257116, - 0.33198200000000005, - 0.214376, - 0.07343000000000001, - 0.016293, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021617, - 0.090007, - 0.274323, - 0.458315, - 0.594495, - 0.6940109999999999, - 0.738758, - 0.733101, - 0.686984, - 0.594563, - 0.45626, - 0.266219, - 0.068632, - 0.011840999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01468, - 0.080611, - 0.280236, - 0.462341, - 0.589976, - 0.675434, - 0.718328, - 0.716052, - 0.672102, - 0.582233, - 0.447535, - 0.260158, - 0.066204, - 0.011064000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013564, - 0.076969, - 0.277999, - 0.457399, - 0.5802609999999999, - 0.661036, - 0.704718, - 0.7014779999999999, - 0.6572060000000001, - 0.568141, - 0.435956, - 0.254136, - 0.065755, - 0.012052, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004628, - 0.061717, - 0.216007, - 0.33203699999999997, - 0.42419799999999996, - 0.289919, - 0.37951999999999997, - 0.38125400000000004, - 0.440322, - 0.519638, - 0.40256200000000003, - 0.244771, - 0.06940600000000001, - 0.013007, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006535, - 0.07380400000000001, - 0.255538, - 0.424486, - 0.547668, - 0.634656, - 0.677077, - 0.6764690000000001, - 0.630222, - 0.5471079999999999, - 0.417806, - 0.242733, - 0.07062, - 0.012983, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014478, - 0.07508100000000001, - 0.262874, - 0.43830399999999997, - 0.5662290000000001, - 0.654087, - 0.698203, - 0.696646, - 0.653809, - 0.564929, - 0.434158, - 0.254848, - 0.066488, - 0.011514, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012667, - 0.076346, - 0.274509, - 0.455258, - 0.582511, - 0.6675209999999999, - 0.7111559999999999, - 0.708902, - 0.66218, - 0.572129, - 0.439625, - 0.257841, - 0.06777, - 0.011583999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012127, - 0.076393, - 0.277362, - 0.46061799999999997, - 0.592174, - 0.6805739999999999, - 0.726029, - 0.722896, - 0.675523, - 0.581646, - 0.44487400000000005, - 0.26032799999999995, - 0.065473, - 0.009749, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011498, - 0.07521800000000001, - 0.274161, - 0.456083, - 0.587598, - 0.680817, - 0.7278600000000001, - 0.726917, - 0.681245, - 0.589383, - 0.453366, - 0.267001, - 0.06622499999999999, - 0.009749, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011549, - 0.074517, - 0.2769, - 0.457709, - 0.589566, - 0.681406, - 0.726542, - 0.724599, - 0.6802590000000001, - 0.58536, - 0.448698, - 0.26376900000000003, - 0.067418, - 0.009707, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012029, - 0.076544, - 0.271383, - 0.451926, - 0.581679, - 0.670462, - 0.713649, - 0.708481, - 0.665903, - 0.5729829999999999, - 0.437997, - 0.255859, - 0.067228, - 0.010731, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013194, - 0.075078, - 0.25977100000000003, - 0.43105099999999996, - 0.55522, - 0.641657, - 0.685635, - 0.681661, - 0.637246, - 0.5495599999999999, - 0.41673899999999997, - 0.24327600000000002, - 0.066526, - 0.006848, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0012720000000000001, - 0.051014000000000004, - 0.056789, - 0.052455, - 0.5478500000000001, - 0.551359, - 0.6499729999999999, - 0.049083, - 0.15639699999999998, - 0.13254, - 0.016735, - 0.07085, - 0.011986, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012169000000000001, - 0.07522, - 0.255774, - 0.424952, - 0.550921, - 0.641629, - 0.687348, - 0.687721, - 0.644226, - 0.557498, - 0.42799, - 0.251089, - 0.067396, - 0.009917, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010538, - 0.072035, - 0.265319, - 0.443202, - 0.572061, - 0.6619149999999999, - 0.7073039999999999, - 0.705715, - 0.664263, - 0.572346, - 0.438365, - 0.253925, - 0.06802899999999999, - 0.009911, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010423, - 0.07245900000000001, - 0.266138, - 0.44423599999999996, - 0.572506, - 0.657473, - 0.702114, - 0.7038260000000001, - 0.66013, - 0.571194, - 0.439668, - 0.25635, - 0.067789, - 0.009155, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010912000000000002, - 0.073114, - 0.260879, - 0.435747, - 0.562297, - 0.6522519999999999, - 0.696553, - 0.6945979999999999, - 0.653941, - 0.563513, - 0.43092, - 0.251074, - 0.06714700000000001, - 0.008439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010995, - 0.075171, - 0.26406999999999997, - 0.44027, - 0.5679379999999999, - 0.654803, - 0.697816, - 0.6970270000000001, - 0.655087, - 0.565827, - 0.433409, - 0.251974, - 0.066898, - 0.008345, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009736, - 0.074, - 0.26538, - 0.442835, - 0.570096, - 0.654072, - 0.698145, - 0.6958529999999999, - 0.646836, - 0.559742, - 0.430479, - 0.25247800000000004, - 0.065444, - 0.007019999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009629, - 0.074934, - 0.265065, - 0.44109699999999996, - 0.5665549999999999, - 0.653421, - 0.6977380000000001, - 0.696757, - 0.657166, - 0.566136, - 0.433302, - 0.252695, - 0.066535, - 0.006828, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00895, - 0.075384, - 0.26143099999999997, - 0.436389, - 0.559781, - 0.646471, - 0.6892780000000001, - 0.686742, - 0.641418, - 0.54957, - 0.417097, - 0.245817, - 0.06964100000000001, - 0.005979, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.042686, - 0.006637, - 0.358203, - 0.5673680000000001, - 0.577245, - 0.607641, - 0.615478, - 0.648558, - 0.562297, - 0.42758999999999997, - 0.24985, - 0.067526, - 0.005753, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008407, - 0.07680100000000001, - 0.262219, - 0.436562, - 0.561754, - 0.6511950000000001, - 0.7001710000000001, - 0.7014790000000001, - 0.655922, - 0.5700940000000001, - 0.4355, - 0.25629599999999997, - 0.06561199999999999, - 0.005293999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007109, - 0.07395399999999999, - 0.270024, - 0.446108, - 0.570472, - 0.656852, - 0.6969310000000001, - 0.696861, - 0.655416, - 0.566506, - 0.433398, - 0.252085, - 0.06474099999999999, - 0.004791999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006857, - 0.077874, - 0.265974, - 0.44231099999999995, - 0.5708730000000001, - 0.656091, - 0.7010040000000001, - 0.697132, - 0.504191, - 0.559731, - 0.42486900000000005, - 0.248596, - 0.070513, - 0.004543999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006601, - 0.08469499999999999, - 0.266532, - 0.445038, - 0.580115, - 0.672755, - 0.7217039999999999, - 0.7242799999999999, - 0.6750069999999999, - 0.584368, - 0.44479199999999997, - 0.262043, - 0.06742400000000001, - 0.004683, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0069370000000000005, - 0.080025, - 0.289116, - 0.483524, - 0.624478, - 0.7229500000000001, - 0.7694099999999999, - 0.7636839999999999, - 0.714212, - 0.6133350000000001, - 0.466629, - 0.26996699999999996, - 0.06569799999999999, - 0.003277, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004882, - 0.07692600000000001, - 0.287098, - 0.476315, - 0.612769, - 0.7035359999999999, - 0.751235, - 0.7493329999999999, - 0.698535, - 0.600611, - 0.45809, - 0.266259, - 0.064384, - 0.00329, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004844, - 0.077888, - 0.289605, - 0.476438, - 0.608678, - 0.6937300000000001, - 0.7425309999999999, - 0.7443339999999999, - 0.697496, - 0.6019070000000001, - 0.460738, - 0.26852800000000004, - 0.064038, - 0.0027730000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004318, - 0.077015, - 0.287494, - 0.47453500000000004, - 0.6097899999999999, - 0.701236, - 0.749715, - 0.751082, - 0.701121, - 0.60526, - 0.461826, - 0.269077, - 0.065229, - 0.00283, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003803, - 0.07689700000000001, - 0.286003, - 0.47014, - 0.605211, - 0.6969740000000001, - 0.745189, - 0.746537, - 0.697662, - 0.602155, - 0.46024400000000004, - 0.266986, - 0.062581, - 0.003162, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004367, - 0.077557, - 0.284992, - 0.474109, - 0.615112, - 0.708534, - 0.7551939999999999, - 0.75049, - 0.702862, - 0.6033419999999999, - 0.45904199999999995, - 0.264962, - 0.061602, - 0.002662, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003832, - 0.075235, - 0.275488, - 0.455628, - 0.587604, - 0.6755890000000001, - 0.717346, - 0.713549, - 0.667135, - 0.5699740000000001, - 0.432887, - 0.250701, - 0.0577, - 0.002069, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003766, - 0.07469799999999999, - 0.273005, - 0.452291, - 0.5791580000000001, - 0.667019, - 0.712179, - 0.710818, - 0.666808, - 0.573551, - 0.436599, - 0.249812, - 0.056856000000000004, - 0.0015509999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0032890000000000003, - 0.07414799999999999, - 0.270334, - 0.445384, - 0.552289, - 0.5316029999999999, - 0.7093079999999999, - 0.705339, - 0.5526380000000001, - 0.41850299999999996, - 0.377523, - 0.227534, - 0.056715, - 0.0005600000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002543, - 0.076658, - 0.269613, - 0.44653699999999996, - 0.5740080000000001, - 0.6577200000000001, - 0.701564, - 0.700024, - 0.653627, - 0.563628, - 0.423556, - 0.235727, - 0.062078, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002186, - 0.077586, - 0.26826799999999995, - 0.442486, - 0.5668179999999999, - 0.646841, - 0.69008, - 0.687998, - 0.640653, - 0.549154, - 0.410123, - 0.229373, - 0.060127, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00273, - 0.076699, - 0.267375, - 0.44297699999999995, - 0.5698920000000001, - 0.661606, - 0.705661, - 0.705322, - 0.6602140000000001, - 0.568335, - 0.427339, - 0.24024700000000002, - 0.058287, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0027280000000000004, - 0.07608, - 0.275271, - 0.45746800000000004, - 0.589716, - 0.6823490000000001, - 0.7283350000000001, - 0.7277619999999999, - 0.678284, - 0.581177, - 0.441774, - 0.250563, - 0.054793, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003267, - 0.073828, - 0.28688400000000003, - 0.47397500000000004, - 0.5482400000000001, - 0.703952, - 0.680172, - 0.745155, - 0.694793, - 0.593942, - 0.449212, - 0.254136, - 0.053938, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0023250000000000002, - 0.08029399999999999, - 0.29437, - 0.480045, - 0.611919, - 0.6984199999999999, - 0.74415, - 0.743555, - 0.689866, - 0.591361, - 0.446406, - 0.250798, - 0.052543999999999993, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.001758, - 0.07896500000000001, - 0.287109, - 0.471032, - 0.602951, - 0.687862, - 0.727938, - 0.72372, - 0.6741090000000001, - 0.575817, - 0.434733, - 0.241907, - 0.053357999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.001286, - 0.07777500000000001, - 0.286416, - 0.471769, - 0.6054189999999999, - 0.694309, - 0.735928, - 0.727256, - 0.6796810000000001, - 0.578447, - 0.433556, - 0.242729, - 0.051383000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.001369, - 0.08148000000000001, - 0.296375, - 0.487702, - 0.627654, - 0.718278, - 0.7641939999999999, - 0.757818, - 0.703286, - 0.60054, - 0.45319, - 0.253834, - 0.051377, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.000859, - 0.080983, - 0.2911, - 0.471852, - 0.60568, - 0.695742, - 0.7391939999999999, - 0.733955, - 0.686178, - 0.5850270000000001, - 0.43987200000000004, - 0.245218, - 0.049717, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00028599999999999996, - 0.077226, - 0.27174200000000004, - 0.453347, - 0.5882200000000001, - 0.679154, - 0.724007, - 0.722152, - 0.5730299999999999, - 0.487927, - 0.360096, - 0.226899, - 0.049052, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.077318, - 0.264808, - 0.40756200000000004, - 0.515223, - 0.66592, - 0.607734, - 0.565789, - 0.560976, - 0.142279, - 0.086342, - 0.200441, - 0.049277, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076251, - 0.272393, - 0.449427, - 0.579801, - 0.672975, - 0.71786, - 0.713912, - 0.6656839999999999, - 0.569961, - 0.42335300000000003, - 0.23199899999999998, - 0.044802999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076772, - 0.280738, - 0.450853, - 0.573722, - 0.6623049999999999, - 0.707663, - 0.705832, - 0.6583089999999999, - 0.561391, - 0.421406, - 0.22975, - 0.042415, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.077394, - 0.27872399999999997, - 0.442267, - 0.561292, - 0.64067, - 0.6759550000000001, - 0.672164, - 0.629779, - 0.372318, - 0.23221899999999998, - 0.200868, - 0.043741999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034484, - 0.27456400000000003, - 0.448955, - 0.577234, - 0.671217, - 0.71621, - 0.711653, - 0.298404, - 0.02838, - 0.41194, - 0.052028, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076614, - 0.263334, - 0.428958, - 0.5518200000000001, - 0.6457390000000001, - 0.6840839999999999, - 0.680338, - 0.635049, - 0.47165300000000004, - 0.346009, - 0.23098500000000002, - 0.041799, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08293099999999999, - 0.294332, - 0.46803500000000003, - 0.599711, - 0.687917, - 0.73317, - 0.731445, - 0.679921, - 0.578455, - 0.429896, - 0.229972, - 0.040606, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08349899999999999, - 0.297692, - 0.465627, - 0.579393, - 0.6691670000000001, - 0.7122809999999999, - 0.168298, - 0.017440999999999998, - 0.013486000000000001, - 0.421836, - 0.224774, - 0.038871, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081165, - 0.288803, - 0.466765, - 0.597967, - 0.684778, - 0.724682, - 0.716654, - 0.226055, - 0.181448, - 0.041783, - 0.153233, - 0.039250999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081596, - 0.291173, - 0.464038, - 0.594292, - 0.679375, - 0.71565, - 0.705945, - 0.651207, - 0.550168, - 0.405345, - 0.21164, - 0.037613999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08039400000000001, - 0.28363900000000003, - 0.459699, - 0.584056, - 0.667556, - 0.702353, - 0.6923400000000001, - 0.638196, - 0.541066, - 0.145143, - 0.208316, - 0.01642, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08083, - 0.283387, - 0.463325, - 0.590157, - 0.680508, - 0.722025, - 0.717405, - 0.66488, - 0.562855, - 0.411295, - 0.21374600000000002, - 0.03362, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.082058, - 0.28736700000000004, - 0.46560700000000005, - 0.596176, - 0.68714, - 0.729155, - 0.724485, - 0.673636, - 0.5631029999999999, - 0.405323, - 0.208385, - 0.032292, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08783400000000001, - 0.31195, - 0.506901, - 0.6445839999999999, - 0.73576, - 0.7751140000000001, - 0.764851, - 0.711467, - 0.599876, - 0.44211900000000004, - 0.225365, - 0.033305, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.089965, - 0.31704000000000004, - 0.515319, - 0.655404, - 0.74751, - 0.789505, - 0.775277, - 0.714527, - 0.602128, - 0.442338, - 0.226978, - 0.031569, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.088021, - 0.30609699999999995, - 0.48977800000000005, - 0.623915, - 0.720404, - 0.764923, - 0.757652, - 0.699528, - 0.592502, - 0.437656, - 0.22398300000000002, - 0.029422, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08673399999999999, - 0.308907, - 0.49097, - 0.621409, - 0.7063680000000001, - 0.737344, - 0.716649, - 0.64995, - 0.544202, - 0.404028, - 0.208511, - 0.026652000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08402, - 0.301133, - 0.480499, - 0.6047809999999999, - 0.68675, - 0.717307, - 0.698774, - 0.63093, - 0.533446, - 0.393503, - 0.200775, - 0.026053999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081199, - 0.29427499999999995, - 0.474688, - 0.604115, - 0.688973, - 0.729838, - 0.7273890000000001, - 0.6664990000000001, - 0.553592, - 0.39467, - 0.180597, - 0.020611, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076186, - 0.26887700000000003, - 0.450653, - 0.59403, - 0.706471, - 0.744642, - 0.735173, - 0.677592, - 0.555531, - 0.383541, - 0.198412, - 0.023417999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.091524, - 0.326945, - 0.5356449999999999, - 0.687071, - 0.792531, - 0.833333, - 0.819292, - 0.752477, - 0.626927, - 0.454283, - 0.22625, - 0.023404, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.097609, - 0.345224, - 0.551808, - 0.705429, - 0.801021, - 0.833333, - 0.8246079999999999, - 0.751374, - 0.628577, - 0.459171, - 0.227413, - 0.02209, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096786, - 0.33986500000000003, - 0.5428869999999999, - 0.6872140000000001, - 0.780438, - 0.816801, - 0.795639, - 0.726172, - 0.607062, - 0.441548, - 0.22045599999999999, - 0.018767, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094247, - 0.32894, - 0.517535, - 0.649841, - 0.731229, - 0.762368, - 0.7442329999999999, - 0.677188, - 0.572231, - 0.420319, - 0.20741900000000002, - 0.015727, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08742799999999999, - 0.306751, - 0.5035149999999999, - 0.651353, - 0.749309, - 0.791015, - 0.781106, - 0.71594, - 0.602262, - 0.430803, - 0.20699299999999998, - 0.013266, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094812, - 0.334854, - 0.532556, - 0.669088, - 0.7520560000000001, - 0.781653, - 0.759274, - 0.6891799999999999, - 0.576434, - 0.417296, - 0.205063, - 0.011842, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.092682, - 0.322262, - 0.509454, - 0.649606, - 0.738998, - 0.7787350000000001, - 0.764912, - 0.694447, - 0.5777490000000001, - 0.41013299999999997, - 0.192739, - 0.010324, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.080023, - 0.28840499999999997, - 0.47956, - 0.632268, - 0.751885, - 0.798491, - 0.787661, - 0.720281, - 0.602485, - 0.435154, - 0.206253, - 0.01056, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096716, - 0.343882, - 0.549614, - 0.697564, - 0.789918, - 0.826779, - 0.8064600000000001, - 0.733641, - 0.609169, - 0.435505, - 0.203543, - 0.009023999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096266, - 0.339086, - 0.5392680000000001, - 0.681166, - 0.767297, - 0.799513, - 0.7754840000000001, - 0.7032430000000001, - 0.582318, - 0.417617, - 0.19570300000000002, - 0.007417, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09411, - 0.336858, - 0.532257, - 0.670243, - 0.757509, - 0.788704, - 0.7645890000000001, - 0.691678, - 0.575564, - 0.412901, - 0.191941, - 0.005817, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08748, - 0.314267, - 0.49972300000000003, - 0.633547, - 0.727117, - 0.766744, - 0.754402, - 0.6947380000000001, - 0.5796520000000001, - 0.41447300000000004, - 0.18912700000000002, - 0.004798, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094654, - 0.330827, - 0.517004, - 0.650887, - 0.7343569999999999, - 0.7672720000000001, - 0.74859, - 0.684762, - 0.571964, - 0.409229, - 0.186581, - 0.003675, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06918600000000001, - 0.284687, - 0.40991500000000003, - 0.6516810000000001, - 0.640837, - 0.597262, - 0.620324, - 0.42395900000000003, - 0.189798, - 0.412403, - 0.186075, - 0.0025510000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08379099999999999, - 0.308387, - 0.490259, - 0.6198830000000001, - 0.64715, - 0.6772400000000001, - 0.649732, - 0.556929, - 0.403734, - 0.26719099999999996, - 0.08055200000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.084813, - 0.312623, - 0.5021209999999999, - 0.5615220000000001, - 0.656464, - 0.612754, - 0.351671, - 0.45055399999999995, - 0.251888, - 0.266644, - 0.040715, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.087385, - 0.312525, - 0.487219, - 0.6231180000000001, - 0.711661, - 0.750903, - 0.741106, - 0.675552, - 0.55799, - 0.392288, - 0.170631, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.039078, - 0.274578, - 0.494924, - 0.6267699999999999, - 0.715075, - 0.753089, - 0.741706, - 0.6765410000000001, - 0.557902, - 0.39205900000000005, - 0.169608, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.084552, - 0.315007, - 0.508853, - 0.64604, - 0.7403930000000001, - 0.776867, - 0.7648550000000001, - 0.692774, - 0.5699529999999999, - 0.393096, - 0.165522, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07907800000000001, - 0.319609, - 0.526711, - 0.677661, - 0.7681330000000001, - 0.805468, - 0.7878200000000001, - 0.71602, - 0.420351, - 0.269385, - 0.009849, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.069745, - 0.046383, - 0.211787, - 0.6891079999999999, - 0.34262400000000004, - 0.81826, - 0.7984629999999999, - 0.129915, - 0.198302, - 0.41850400000000004, - 0.002156, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09232800000000001, - 0.35337999999999997, - 0.562568, - 0.7093590000000001, - 0.797221, - 0.832553, - 0.08744299999999999, - 0.216433, - 0.010967000000000001, - 0.017209, - 0.08956, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09317700000000001, - 0.347765, - 0.557428, - 0.698462, - 0.782534, - 0.811904, - 0.7856069999999999, - 0.7065560000000001, - 0.583272, - 0.400089, - 0.162653, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08865300000000001, - 0.337718, - 0.541632, - 0.6783490000000001, - 0.763695, - 0.790509, - 0.767128, - 0.694002, - 0.57304, - 0.401406, - 0.162493, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.088395, - 0.339119, - 0.5344800000000001, - 0.667239, - 0.7358049999999999, - 0.752885, - 0.729962, - 0.663695, - 0.55055, - 0.38830000000000003, - 0.158317, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.083626, - 0.328098, - 0.5205839999999999, - 0.657128, - 0.6154310000000001, - 0.633888, - 0.751035, - 0.675605, - 0.547004, - 0.36993, - 0.144755, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08204900000000001, - 0.32782799999999995, - 0.529906, - 0.665727, - 0.744328, - 0.769812, - 0.7462770000000001, - 0.672236, - 0.5512440000000001, - 0.37904000000000004, - 0.14527400000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.084373, - 0.334637, - 0.531218, - 0.670381, - 0.751812, - 0.781566, - 0.759664, - 0.684359, - 0.55765, - 0.382878, - 0.14928899999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08333, - 0.333183, - 0.526046, - 0.6566219999999999, - 0.729096, - 0.74574, - 0.712372, - 0.6402559999999999, - 0.5327999999999999, - 0.372125, - 0.14454599999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08132500000000001, - 0.321942, - 0.505543, - 0.531186, - 0.628436, - 0.728611, - 0.622981, - 0.5122709999999999, - 0.539091, - 0.316109, - 0.12946100000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.069771, - 0.281949, - 0.479825, - 0.622484, - 0.703116, - 0.735587, - 0.7170890000000001, - 0.6619210000000001, - 0.540678, - 0.361514, - 0.121517, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.073994, - 0.316137, - 0.509618, - 0.645105, - 0.7344579999999999, - 0.77101, - 0.752058, - 0.68022, - 0.556929, - 0.37499400000000005, - 0.132066, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07506600000000001, - 0.329903, - 0.5288189999999999, - 0.669962, - 0.75436, - 0.7805460000000001, - 0.7505259999999999, - 0.669593, - 0.546274, - 0.367042, - 0.129351, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07594799999999999, - 0.33469600000000005, - 0.5404629999999999, - 0.678221, - 0.759999, - 0.784149, - 0.753497, - 0.6700839999999999, - 0.548381, - 0.37117, - 0.12865000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067917, - 0.32844, - 0.523242, - 0.649293, - 0.737413, - 0.774697, - 0.7590779999999999, - 0.6829489999999999, - 0.558019, - 0.373231, - 0.116453, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.060235, - 0.321887, - 0.522903, - 0.66134, - 0.7388239999999999, - 0.764106, - 0.7355839999999999, - 0.663938, - 0.5459700000000001, - 0.36623, - 0.10873999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.055192, - 0.318624, - 0.520471, - 0.655613, - 0.725698, - 0.745539, - 0.716071, - 0.647002, - 0.527909, - 0.35341, - 0.107935, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.051723, - 0.322864, - 0.528386, - 0.6661549999999999, - 0.751287, - 0.780913, - 0.755735, - 0.678964, - 0.55192, - 0.365546, - 0.120102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04988, - 0.323188, - 0.529798, - 0.662609, - 0.742851, - 0.768439, - 0.738955, - 0.663066, - 0.5391330000000001, - 0.357768, - 0.110888, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03703, - 0.290132, - 0.492291, - 0.634021, - 0.723682, - 0.7520650000000001, - 0.7258680000000001, - 0.579526, - 0.273806, - 0.19725499999999999, - 0.050616999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033932000000000004, - 0.28628899999999996, - 0.491966, - 0.643153, - 0.7302569999999999, - 0.76287, - 0.7335119999999999, - 0.6533869999999999, - 0.505711, - 0.309961, - 0.078503, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033249, - 0.2959, - 0.519744, - 0.67773, - 0.7724869999999999, - 0.815714, - 0.7995950000000001, - 0.7221029999999999, - 0.590255, - 0.386684, - 0.11690900000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040188, - 0.340798, - 0.563101, - 0.707622, - 0.7927329999999999, - 0.816487, - 0.784709, - 0.70663, - 0.574032, - 0.383591, - 0.11746899999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037425, - 0.33852899999999997, - 0.55747, - 0.701844, - 0.784769, - 0.807535, - 0.775019, - 0.688376, - 0.556468, - 0.36551999999999996, - 0.107404, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.032839, - 0.327946, - 0.5421180000000001, - 0.678649, - 0.763641, - 0.78828, - 0.7606620000000001, - 0.679907, - 0.549496, - 0.357584, - 0.10004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030358, - 0.32491699999999996, - 0.5375639999999999, - 0.671922, - 0.7458400000000001, - 0.76644, - 0.735885, - 0.440041, - 0.483379, - 0.275113, - 0.093996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028457999999999997, - 0.31888099999999997, - 0.5279360000000001, - 0.477634, - 0.716495, - 0.747712, - 0.729763, - 0.6608529999999999, - 0.540621, - 0.351203, - 0.030073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024170999999999998, - 0.312137, - 0.5279980000000001, - 0.685941, - 0.667825, - 0.449124, - 0.31792899999999996, - 0.68565, - 0.390001, - 0.32025099999999995, - 0.066684, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013835, - 0.29871800000000004, - 0.518872, - 0.66926, - 0.7559130000000001, - 0.779464, - 0.752802, - 0.683199, - 0.5535869999999999, - 0.36177699999999996, - 0.089503, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01821, - 0.33626799999999996, - 0.559174, - 0.71211, - 0.802959, - 0.8321660000000001, - 0.800361, - 0.714853, - 0.570804, - 0.370468, - 0.085726, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015080999999999999, - 0.324504, - 0.5412089999999999, - 0.690302, - 0.7776810000000001, - 0.805843, - 0.776123, - 0.692526, - 0.556356, - 0.351922, - 0.07431, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010805, - 0.305906, - 0.522848, - 0.667957, - 0.755856, - 0.78654, - 0.75751, - 0.67748, - 0.53965, - 0.347092, - 0.07054200000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008667, - 0.299342, - 0.515717, - 0.65528, - 0.7360789999999999, - 0.757438, - 0.728174, - 0.651712, - 0.526399, - 0.344615, - 0.068788, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007969, - 0.300274, - 0.5095810000000001, - 0.64179, - 0.71697, - 0.747503, - 0.725487, - 0.652981, - 0.524933, - 0.338949, - 0.065881, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003077, - 0.293784, - 0.507337, - 0.6458579999999999, - 0.726481, - 0.749827, - 0.718604, - 0.641595, - 0.5127200000000001, - 0.32316500000000004, - 0.05602, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004224, - 0.28614999999999996, - 0.496679, - 0.615192, - 0.6905309999999999, - 0.732201, - 0.5296420000000001, - 0.648601, - 0.522007, - 0.328353, - 0.057686999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.293768, - 0.513991, - 0.65822, - 0.751837, - 0.7826000000000001, - 0.758028, - 0.6754779999999999, - 0.5398780000000001, - 0.336031, - 0.054354999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.229303, - 0.454669, - 0.621816, - 0.727923, - 0.759908, - 0.73499, - 0.443108, - 0.496525, - 0.293755, - 0.002265, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.231903, - 0.28092700000000004, - 0.624068, - 0.724563, - 0.759909, - 0.738721, - 0.664337, - 0.5331269999999999, - 0.334949, - 0.055779, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10041599999999999, - 0.287881, - 0.632407, - 0.721325, - 0.6127100000000001, - 0.517942, - 0.416767, - 0.369634, - 0.20540899999999998, - 0.002205, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020344, - 0.48115800000000003, - 0.388367, - 0.734931, - 0.7734249999999999, - 0.754199, - 0.677771, - 0.542781, - 0.335702, - 0.01334, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.253521, - 0.485854, - 0.643393, - 0.736509, - 0.772089, - 0.7487659999999999, - 0.668156, - 0.529126, - 0.326788, - 0.044567999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.300174, - 0.5451849999999999, - 0.708502, - 0.80134, - 0.831197, - 0.799507, - 0.716394, - 0.575545, - 0.35889800000000005, - 0.053811, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.282563, - 0.5187430000000001, - 0.6723830000000001, - 0.7659579999999999, - 0.7958310000000001, - 0.768602, - 0.682907, - 0.547088, - 0.278557, - 0.007331000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.099217, - 0.31859699999999996, - 0.6646989999999999, - 0.569653, - 0.64242, - 0.35803500000000005, - 0.25294300000000003, - 0.100123, - 0.273293, - 0.006157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.24607099999999998, - 0.228103, - 0.628096, - 0.493699, - 0.51686, - 0.16775800000000002, - 0.666389, - 0.530216, - 0.32371300000000003, - 0.033112, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.25875099999999995, - 0.48815, - 0.636755, - 0.732501, - 0.6356219999999999, - 0.505801, - 0.44678500000000004, - 0.198896, - 0.06913899999999999, - 0.00046800000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.248726, - 0.490769, - 0.6524070000000001, - 0.736359, - 0.764673, - 0.736735, - 0.655981, - 0.5230049999999999, - 0.321517, - 0.034885, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081214, - 0.309337, - 0.415222, - 0.717863, - 0.757005, - 0.734993, - 0.659292, - 0.52464, - 0.210478, - 0.006212, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.254383, - 0.515559, - 0.6748310000000001, - 0.774992, - 0.8111, - 0.7836989999999999, - 0.69948, - 0.555818, - 0.346985, - 0.006843, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08201800000000001, - 0.502087, - 0.658883, - 0.748788, - 0.78643, - 0.76538, - 0.689615, - 0.555316, - 0.347454, - 0.040917, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081954, - 0.500901, - 0.643764, - 0.722268, - 0.762445, - 0.7445320000000001, - 0.6681130000000001, - 0.5307050000000001, - 0.334155, - 0.039174999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.090297, - 0.492899, - 0.636746, - 0.7192200000000001, - 0.7378709999999999, - 0.7117279999999999, - 0.6460499999999999, - 0.5192469999999999, - 0.332792, - 0.042119, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.066106, - 0.268338, - 0.423965, - 0.5869800000000001, - 0.557567, - 0.5192140000000001, - 0.610062, - 0.5009089999999999, - 0.31441800000000003, - 0.031341, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067292, - 0.284527, - 0.6138920000000001, - 0.7181799999999999, - 0.763692, - 0.7462409999999999, - 0.6763239999999999, - 0.540089, - 0.343514, - 0.042225, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.20565, - 0.470835, - 0.629564, - 0.724308, - 0.766805, - 0.7465689999999999, - 0.6720280000000001, - 0.533674, - 0.124861, - 0.000423, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012541, - 0.146346, - 0.218701, - 0.009936, - 0.05912, - 0.021743, - 0.027427, - 0.080292, - 0.053134999999999995, - 0.033429, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.180511, - 0.44994999999999996, - 0.480558, - 0.563862, - 0.520109, - 0.564016, - 0.383623, - 0.13995500000000002, - 0.017038, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037923, - 0.082157, - 0.072137, - 0.117772, - 0.405541, - 0.387872, - 0.488442, - 0.374099, - 0.307741, - 0.012944, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.17328100000000002, - 0.003713, - 0.631733, - 0.353815, - 0.444603, - 0.492788, - 0.20970599999999998, - 0.004253, - 0.33504, - 0.003823, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.180171, - 0.48429099999999997, - 0.662058, - 0.762557, - 0.805327, - 0.7852169999999999, - 0.7080230000000001, - 0.56678, - 0.346855, - 0.004444, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.179709, - 0.46717000000000003, - 0.6276470000000001, - 0.7230850000000001, - 0.767178, - 0.5914020000000001, - 0.680023, - 0.360042, - 0.241241, - 0.028045999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.169067, - 0.47007499999999997, - 0.638692, - 0.7366739999999999, - 0.7774, - 0.7561380000000001, - 0.45593, - 0.5411459999999999, - 0.335918, - 0.031799, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.169875, - 0.48206099999999996, - 0.651482, - 0.7582770000000001, - 0.800237, - 0.777166, - 0.6993429999999999, - 0.558841, - 0.34334, - 0.032179, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.16505099999999998, - 0.486207, - 0.657125, - 0.6986079999999999, - 0.693381, - 0.7683150000000001, - 0.557194, - 0.553859, - 0.351525, - 0.036669, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.155145, - 0.461129, - 0.630808, - 0.735178, - 0.785512, - 0.777556, - 0.225082, - 0.15044300000000002, - 0.342557, - 0.03123, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.14418199999999998, - 0.458913, - 0.479303, - 0.380979, - 0.775091, - 0.023267, - 0.199731, - 0.066807, - 0.153915, - 0.022161, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.151681, - 0.470808, - 0.650428, - 0.7594529999999999, - 0.807166, - 0.788475, - 0.706433, - 0.5650510000000001, - 0.358124, - 0.038231, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.151543, - 0.478238, - 0.651402, - 0.758953, - 0.800665, - 0.7795639999999999, - 0.702674, - 0.56286, - 0.357308, - 0.041568, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.138708, - 0.210651, - 0.622953, - 0.716237, - 0.743563, - 0.734023, - 0.6681849999999999, - 0.5414829999999999, - 0.343507, - 0.038011, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.121145, - 0.23294, - 0.6289, - 0.5152709999999999, - 0.507863, - 0.473408, - 0.066858, - 0.39196, - 0.349071, - 0.0055899999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.134658, - 0.470459, - 0.6508379999999999, - 0.7654489999999999, - 0.8158200000000001, - 0.801414, - 0.72621, - 0.585942, - 0.377149, - 0.054387, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.138851, - 0.470574, - 0.6401760000000001, - 0.741839, - 0.781397, - 0.76232, - 0.691926, - 0.560845, - 0.364261, - 0.006595, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096102, - 0.065228, - 0.613275, - 0.5733469999999999, - 0.5743980000000001, - 0.753479, - 0.625656, - 0.558945, - 0.358668, - 0.052375, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.127584, - 0.465435, - 0.6368630000000001, - 0.740158, - 0.779592, - 0.761161, - 0.687929, - 0.5615610000000001, - 0.364584, - 0.050676, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.120866, - 0.450305, - 0.61999, - 0.69971, - 0.7320570000000001, - 0.727034, - 0.665661, - 0.537581, - 0.343251, - 0.040179, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038506, - 0.201413, - 0.30916899999999997, - 0.605852, - 0.767018, - 0.574845, - 0.710862, - 0.58084, - 0.374729, - 0.039710999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10720099999999999, - 0.422965, - 0.6094339999999999, - 0.7143740000000001, - 0.55702, - 0.755105, - 0.6869160000000001, - 0.557506, - 0.35659199999999996, - 0.051065, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10942400000000001, - 0.43626, - 0.6105119999999999, - 0.717865, - 0.7653110000000001, - 0.751, - 0.369433, - 0.453274, - 0.111301, - 0.002709, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.105634, - 0.425738, - 0.613294, - 0.71697, - 0.7653390000000001, - 0.7526849999999999, - 0.6871799999999999, - 0.494915, - 0.35642399999999996, - 0.012266, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.116429, - 0.469032, - 0.6505650000000001, - 0.7637849999999999, - 0.806976, - 0.625709, - 0.4617, - 0.37878500000000004, - 0.153164, - 0.005131999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.113733, - 0.463537, - 0.642828, - 0.749715, - 0.654027, - 0.691058, - 0.7094790000000001, - 0.580594, - 0.390424, - 0.07828199999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.103739, - 0.437002, - 0.6106699999999999, - 0.542218, - 0.577558, - 0.528649, - 0.43344900000000003, - 0.32770900000000003, - 0.155053, - 0.005602, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01668, - 0.11138200000000001, - 0.152782, - 0.324201, - 0.515428, - 0.602601, - 0.40186, - 0.209235, - 0.36279, - 0.017186, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006552, - 0.26812400000000003, - 0.430122, - 0.327291, - 0.139334, - 0.128154, - 0.035482, - 0.086597, - 0.082486, - 0.002897, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014361, - 0.005632, - 0.151531, - 0.07006399999999999, - 0.106531, - 0.040536, - 0.093756, - 0.394959, - 0.051283, - 0.06218, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081358, - 0.034476999999999994, - 0.218393, - 0.043686, - 0.13411199999999998, - 0.136252, - 0.114898, - 0.08026000000000001, - 0.081997, - 0.0038900000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.083077, - 0.396892, - 0.586102, - 0.714333, - 0.767248, - 0.553376, - 0.476887, - 0.574817, - 0.264644, - 0.10291, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "annual_energy_produced_kwh_bau": 71463.73, - "electric_to_load_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.295, - 17.556, - 26.273, - 48.938, - 61.118, - 55.855, - 45.968, - 31.371, - 7.937, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.839, - 18.257, - 27.039, - 30.854, - 30.078, - 40.563, - 46.492, - 31.885, - 0.563, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.613, - 28.064, - 32.519, - 31.809, - 26.589, - 48.014, - 33.359, - 8.571, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.074, - 18.555, - 27.555, - 31.268, - 30.453, - 47.058, - 47.137, - 32.667, - 8.422, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.161, - 34.519, - 48.681, - 57.482, - 61.267, - 60.469, - 44.906, - 30.046, - 31.797, - 4.036, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.41, - 15.561, - 6.682, - 4.846, - 14.218, - 39.413, - 45.485, - 31.736, - 8.707, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.192, - 14.64, - 23.523, - 27.735, - 27.495, - 44.191, - 45.377, - 31.348, - 8.86, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.396, - 18.424, - 28.083, - 32.671, - 32.089, - 48.487, - 48.949, - 34.059, - 10.261, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 17.414, - 26.173, - 30.235, - 29.647, - 24.935, - 47.193, - 33.187, - 10.701, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.399, - 16.374, - 16.629, - 11.768, - 19.895, - 20.298, - 33.821, - 19.718, - 3.254, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 20.992, - 26.338, - 13.592, - 9.964, - 13.499, - 28.811, - 10.581, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.049, - 15.536, - 24.867, - 29.282, - 28.85, - 44.727, - 46.371, - 32.719, - 11.491, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.31, - 15.207, - 23.629, - 27.877, - 27.8, - 44.716, - 46.428, - 32.723, - 11.278, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.733, - 17.09, - 26.046, - 19.652, - 11.565, - 29.287, - 39.861, - 26.198, - 12.724, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.007, - 13.518, - 7.55, - 14.877, - -0.0, - 34.868, - 17.499, - 1.984, - 1.366, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 14.316, - 23.95, - 28.795, - 28.779, - 44.68, - 47.104, - 33.008, - 12.438, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 13.351, - 22.265, - 26.96, - 13.853, - 43.938, - 46.07, - 32.587, - 12.674, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 11.493, - 15.494, - 13.892, - 2.476, - 27.489, - 12.49, - 1.421, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - -0.0, - -0.0, - 27.474, - 23.393, - -0.0, - 21.657, - 1.404, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.087, - 15.477, - 24.61, - 29.514, - -0.0, - -0.0, - 0.0, - 0.577, - 0.853, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 2.843, - 12.356, - 14.185, - 15.637, - 3.776, - 25.071, - 26.922, - 14.267, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.543, - 14.97, - 23.812, - 28.827, - 29.054, - 47.333, - 47.577, - 34.393, - 14.275, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 14.144, - 5.201, - 14.848, - 8.73, - 28.031, - 35.045, - 22.214, - 3.956, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 0.0, - -0.0, - -0.0, - -0.0, - -0.0, - 3.094, - 1.189, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 0.0, - 26.824, - 17.479, - 35.021, - 14.709, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.938, - 0.0, - 12.191, - 11.483, - 3.108, - -0.0, - 32.651, - 11.877, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.42, - 20.128, - 30.894, - 33.173, - 33.173, - 54.445, - 53.524, - 38.533, - 17.303, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.555, - 19.604, - 29.213, - 33.173, - 33.173, - 54.564, - 51.467, - 37.457, - 17.234, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.898, - 17.905, - 26.507, - 30.393, - 29.95, - 37.518, - 41.683, - 20.338, - 5.538, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.728, - 16.234, - 14.835, - 18.388, - 17.472, - 29.464, - 37.151, - 26.225, - 8.188, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.625, - 33.126, - 33.173, - 29.035, - 23.803, - 37.638, - 14.423, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 13.749, - 22.867, - 27.495, - 28.385, - 45.773, - 48.899, - 35.702, - 15.665, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.125, - 18.901, - 17.986, - 20.23, - 16.832, - 53.775, - 50.358, - 37.408, - 18.603, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.267, - 18.485, - 27.389, - 31.811, - 31.555, - 54.395, - 50.276, - 37.375, - 18.809, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.832, - 16.988, - 26.375, - 30.821, - 30.748, - 52.911, - 49.41, - 36.591, - 18.198, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 12.979, - 16.793, - 12.481, - 5.008, - 34.248, - 21.471, - 6.774, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.748, - 14.759, - 24.158, - 29.212, - 29.85, - 43.712, - 40.042, - 29.577, - 11.795, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.862, - 10.245, - 19.648, - 8.41, - 18.95, - 29.35, - 26.834, - 10.376, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 8.795, - 11.617, - 12.091, - 21.927, - 6.385, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.104, - 3.746, - 13.628, - -0.0, - 0.0, - 0.0, - 6.008, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - -0.0, - 8.13, - 4.847, - 8.888, - 2.329, - 27.229, - 3.715, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.438, - 16.512, - 26.103, - 31.586, - 32.183, - 41.647, - 51.306, - 37.491, - 18.454, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.44, - -0.0, - 25.262, - 30.705, - 30.816, - 52.054, - 50.637, - 36.952, - 1.014, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.818, - 17.904, - -0.0, - 32.264, - 32.735, - 49.033, - 52.157, - 29.623, - 19.06, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.171, - 18.846, - 28.881, - 33.173, - 33.173, - 59.053, - 52.677, - 39.289, - 20.424, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.689, - 18.203, - 26.908, - 31.458, - 31.476, - 45.787, - 50.129, - 37.245, - 19.569, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.204, - 17.16, - 26.328, - 31.093, - 31.429, - 56.985, - 50.469, - 37.493, - 19.219, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.217, - 17.519, - 26.815, - 31.437, - 31.322, - 56.283, - 49.96, - 30.302, - 3.684, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 3.325, - -0.0, - -0.0, - 4.397, - 20.496, - 27.518, - 12.594, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - -0.0, - 14.457, - 6.279, - 18.55, - 37.638, - 19.566, - 0.518, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.467, - 17.089, - 25.881, - 30.724, - 31.138, - 57.346, - 51.342, - 38.112, - 20.412, - 0.774, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.265, - 15.17, - 23.768, - 29.306, - 30.41, - 56.404, - 51.148, - 38.494, - 20.661, - 0.946, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.396, - 14.995, - 10.897, - 0.943, - 25.4, - 12.068, - 0.133, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.499, - 22.293, - 32.131, - 33.173, - 33.483, - 65.049, - 56.676, - 42.616, - 23.057, - 0.566, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.61, - 20.397, - 29.29, - 32.675, - 32.026, - 58.513, - 50.869, - 39.283, - 21.873, - 0.593, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.852, - 19.144, - 29.034, - 33.173, - 33.173, - 45.63, - 8.087, - 2.497, - 4.123, - 1.185, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.581, - 18.145, - 27.677, - 32.797, - 33.173, - 60.129, - 52.625, - 39.689, - 21.334, - 1.676, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.562, - 21.483, - 17.894, - 19.017, - 33.173, - 46.994, - 55.519, - 3.209, - 3.901, - 0.157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 7.928, - 22.387, - 31.941, - 33.173, - 34.566, - 65.049, - 56.13, - 42.352, - 0.496, - 1.163, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.982, - 0.0, - 4.9, - 0.0, - 6.288, - 9.48, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 2.041, - 12.182, - 4.832, - 5.411, - 23.71, - 15.802, - 6.736, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 2.358, - 17.191, - 18.265, - 15.778, - 34.269, - 40.35, - 23.002, - 9.197, - 0.298, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 4.644, - 2.417, - 14.598, - 17.763, - 20.196, - 38.355, - 33.489, - 37.613, - 20.363, - 1.997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 4.719, - 16.629, - 25.043, - 8.111, - 31.135, - 58.226, - 40.785, - 37.378, - 9.776, - 2.016, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 25.5, - 29.703, - 16.997, - 33.942, - 50.287, - 37.216, - 20.167, - 2.172, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.514, - 20.178, - 17.456, - 20.157, - 16.835, - 45.874, - 43.636, - 30.474, - 21.603, - 0.555, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.15, - 21.968, - 30.704, - 33.173, - 37.826, - 61.245, - 52.627, - 39.655, - 17.153, - 1.859, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.404, - 19.353, - 27.745, - 31.021, - 29.318, - 53.628, - 48.721, - 28.645, - 16.01, - 2.526, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 19.086, - 27.865, - 32.064, - 32.343, - 59.561, - 50.779, - 38.069, - 20.746, - 2.804, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 21.31, - 18.289, - 16.709, - 21.477, - 33.559, - 38.581, - 24.576, - 15.22, - 1.994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.441, - 20.891, - 29.909, - 33.173, - 38.08, - 60.63, - 51.74, - 38.814, - 21.136, - 3.098, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.805, - 20.055, - 28.728, - 33.051, - 38.006, - 60.643, - 51.765, - 39.012, - 21.465, - 3.308, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 7.205, - 19.43, - 27.045, - 30.871, - 36.745, - 58.833, - 50.831, - 38.413, - 21.206, - 3.322, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 7.794, - 20.737, - 29.682, - 33.173, - 39.164, - 60.418, - 51.231, - 38.343, - 21.062, - 3.272, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.627, - 16.983, - 24.947, - 27.981, - 34.126, - 57.839, - 50.207, - 38.277, - 21.409, - 3.456, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 8.692, - 21.777, - 30.723, - 33.173, - 40.954, - 62.14, - 53.402, - 35.827, - 15.608, - 2.715, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.715, - 22.906, - 31.439, - 33.173, - 41.649, - 61.008, - 52.436, - 39.544, - 22.236, - 3.752, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.533, - 22.366, - 30.859, - 33.173, - 41.866, - 60.033, - 50.951, - 38.481, - 21.637, - 3.679, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 15.667, - 20.969, - 18.302, - 17.837, - 34.616, - 34.626, - 37.594, - 20.899, - 3.539, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 6.372, - 18.705, - 26.575, - 30.762, - 37.875, - 58.622, - 50.135, - 37.276, - 20.198, - 3.315, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 5.388, - 17.057, - 23.487, - 26.922, - 34.482, - 57.347, - 49.907, - 37.448, - 20.495, - 3.49, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 5.295, - 23.181, - 19.344, - 21.984, - 44.713, - 41.492, - 36.004, - 14.225, - 2.587, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 11.172, - 26.3, - 29.678, - 31.157, - 55.985, - 33.926, - 31.573, - 14.97, - 3.321, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.277, - 17.315, - 26.854, - 31.253, - 38.213, - 51.004, - 49.653, - 37.248, - 20.047, - 3.459, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.437, - 21.38, - 30.346, - 33.173, - 0.0, - 25.974, - 36.172, - 22.642, - 8.083, - 3.626, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.23, - 20.682, - 28.187, - 31.658, - 41.695, - 59.618, - 51.063, - 37.949, - 8.627, - 3.705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.176, - 17.629, - 24.761, - 20.072, - 28.586, - 47.335, - 43.712, - 35.215, - 19.131, - 3.546, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 17.045, - 26.181, - 27.726, - 13.121, - 41.904, - 48.772, - 33.634, - 12.975, - 2.501, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 10.855, - 23.587, - 31.974, - 33.173, - 45.812, - 61.858, - 52.815, - 39.544, - 21.738, - 3.897, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.371, - 20.646, - 29.269, - 33.173, - 44.005, - 61.034, - 52.339, - 38.952, - 0.278, - 0.119, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 11.499, - 24.197, - 32.821, - 33.173, - 46.503, - 62.959, - 53.385, - 40.006, - 21.789, - 3.983, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.831, - 22.049, - 29.677, - 32.783, - 44.279, - 48.255, - 50.328, - 37.806, - 20.878, - 3.884, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.102, - 7.78, - 22.816, - 27.018, - 38.87, - 56.363, - 48.83, - 36.468, - 20.063, - 3.84, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 10.947, - 27.247, - 31.56, - 37.413, - 59.362, - 50.749, - 38.158, - 20.776, - 4.018, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 10.466, - 23.369, - 31.089, - 33.173, - 46.451, - 62.011, - 52.65, - 23.025, - 20.834, - 4.147, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 10.656, - 23.314, - 31.981, - 33.173, - 47.063, - 60.984, - 51.865, - 38.519, - 20.835, - 4.168, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 10.076, - 22.068, - 29.183, - 32.0, - 44.816, - 57.821, - 49.574, - 37.634, - 20.686, - 4.133, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 7.613, - 19.138, - 26.984, - 30.903, - 41.568, - 58.0, - 49.118, - 36.326, - 20.067, - 3.96, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.826, - 19.643, - 27.186, - 31.225, - 48.008, - 58.829, - 49.999, - 36.826, - 18.154, - 3.552, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 9.422, - 21.001, - 29.254, - 33.173, - 47.25, - 60.041, - 51.028, - 38.183, - 20.868, - 3.998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 21.868, - 0.0, - 0.106, - 33.173, - 37.083, - 43.139, - 25.356, - 4.066, - 0.123, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 21.743, - 29.562, - 33.168, - 27.553, - 59.174, - 27.824, - 13.292, - 11.345, - 2.382, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 9.496, - -0.0, - -0.0, - -0.0, - -0.0, - -0.0, - 0.0, - 15.534, - 5.293, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.736, - 23.947, - 31.279, - 33.173, - 47.311, - 60.308, - 51.065, - 38.291, - 20.778, - 3.9, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.716, - 19.213, - 25.028, - 27.235, - 42.251, - 56.191, - 48.43, - 36.611, - 19.772, - 3.928, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.999, - 18.673, - 25.438, - 28.046, - 44.706, - 54.671, - 47.048, - 35.476, - 19.405, - 3.879, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 7.209, - 17.132, - 23.082, - 26.084, - 40.696, - 55.38, - 47.491, - 35.618, - 19.443, - 3.602, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 7.573, - 9.535, - 15.537, - 28.133, - 40.262, - 55.195, - 47.058, - 35.243, - 15.317, - 3.642, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 8.018, - 18.207, - 24.196, - 26.349, - 38.937, - 51.26, - 43.815, - 33.047, - 17.817, - 3.746, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.204, - 16.997, - 24.814, - 27.081, - 37.906, - 51.558, - 43.157, - 33.025, - 18.288, - 3.421, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 6.752, - 16.718, - 22.743, - 24.946, - 38.312, - 52.181, - 44.858, - 33.81, - 18.572, - 3.518, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 5.932, - 16.378, - 23.943, - 27.22, - 40.64, - 54.601, - 46.52, - 34.421, - 18.868, - 3.708, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 8.056, - 18.498, - 25.631, - 29.015, - 51.342, - 56.648, - 48.125, - 36.077, - 19.762, - 3.833, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 6.175, - 18.601, - 16.6, - 0.0, - 9.577, - 35.413, - 12.144, - 11.06, - 6.955, - 1.803, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 0.0, - 3.645, - 14.311, - 15.415, - 23.032, - 25.642, - 14.267, - 3.607, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 8.427, - 19.625, - 26.944, - 30.413, - 45.367, - 27.336, - 35.024, - 14.139, - 7.992, - 1.356, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 9.216, - 19.936, - 26.978, - 29.712, - 44.961, - 55.036, - 46.4, - 34.812, - 18.68, - 3.942, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 8.208, - 19.246, - 26.589, - 28.662, - 42.574, - 52.939, - 44.44, - 33.491, - 18.453, - 3.776, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 7.545, - 17.952, - 24.207, - 25.743, - 39.879, - 51.587, - 44.059, - 33.166, - 17.922, - 4.002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 5.671, - 15.92, - 23.053, - 26.487, - 52.853, - 54.06, - 45.635, - 33.636, - 18.94, - 3.677, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 8.13, - 18.435, - 24.872, - 26.682, - 40.369, - 50.928, - 44.659, - 33.844, - 18.285, - 3.614, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.02, - 16.763, - 22.921, - 24.728, - 38.419, - 51.056, - 44.345, - 33.378, - 17.869, - 3.779, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 6.229, - 15.958, - 22.347, - 24.335, - 37.76, - 50.017, - 42.911, - 32.059, - 17.316, - 3.828, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.264, - 13.541, - 20.713, - 23.996, - 38.141, - 51.704, - 44.207, - 32.873, - 17.706, - 3.907, - 0.021, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 5.239, - 10.871, - 18.848, - 18.824, - 43.175, - 54.48, - 37.364, - 30.485, - 16.487, - 4.09, - 0.069, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.666, - 17.647, - 24.236, - 27.873, - 1.837, - 24.601, - 47.552, - 35.521, - 14.449, - 4.836, - 0.087, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 0.0, - 19.697, - 26.878, - 30.272, - 40.063, - 25.877, - 5.503, - 29.864, - 14.556, - 3.928, - 0.165, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.01, - 4.059, - 26.156, - 28.582, - 45.497, - 37.814, - 37.106, - 33.528, - 18.043, - 4.198, - 0.149, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 5.494, - 15.576, - 22.443, - 25.904, - 41.3, - 53.09, - 44.593, - 33.002, - 17.771, - 4.721, - 0.113, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 6.325, - 17.021, - 24.4, - 27.879, - 44.501, - 54.343, - 46.247, - 34.211, - 18.32, - 4.226, - 0.232, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.741, - 17.301, - 24.278, - 27.517, - 44.192, - 54.409, - 46.284, - 34.596, - 18.601, - 3.917, - 0.273, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 7.695, - 17.972, - 25.733, - 28.92, - 45.5, - 55.225, - 46.806, - 34.941, - 18.764, - 3.852, - 0.223, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 10.681, - 21.058, - 27.318, - 30.005, - 48.803, - 55.458, - 47.321, - 35.519, - 19.167, - 4.139, - 0.296, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.767, - 19.025, - 25.782, - 31.338, - 59.965, - 55.297, - 47.134, - 35.207, - 19.048, - 4.449, - 0.359, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.516, - 19.401, - 26.491, - 29.57, - 40.586, - 11.349, - 35.103, - 35.026, - 18.884, - 4.618, - 0.366, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 7.338, - 17.787, - 24.425, - 27.649, - 44.889, - 54.736, - 46.385, - 28.152, - 16.562, - 4.685, - 0.469, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.816, - 18.828, - 26.246, - 29.588, - 46.696, - 55.916, - 47.692, - 35.612, - 19.192, - 4.165, - 0.369, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 7.747, - 17.349, - 22.833, - 24.959, - 41.443, - 52.023, - 44.412, - 33.493, - 18.257, - 3.738, - 0.376, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.78, - 17.674, - 23.83, - 26.013, - 42.076, - 51.517, - 43.238, - 32.776, - 18.147, - 3.832, - 0.379, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.424, - 16.258, - 21.922, - 23.697, - 38.295, - 48.739, - 42.404, - 32.657, - 17.778, - 3.957, - 0.402, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 4.751, - 14.723, - 21.572, - 24.836, - 55.333, - 52.303, - 44.477, - 33.292, - 18.024, - 3.765, - 0.393, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.298, - 14.458, - 20.366, - 22.621, - 37.661, - 49.593, - 42.584, - 32.356, - 17.576, - 4.016, - 0.427, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 4.514, - 14.078, - 21.061, - 24.116, - 38.828, - 51.757, - 44.152, - 33.223, - 18.155, - 3.738, - 0.464, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.462, - 16.857, - 11.879, - 26.694, - 36.024, - 53.307, - 45.532, - 33.991, - 18.484, - 3.921, - 0.537, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 7.621, - 18.021, - 24.932, - 27.99, - 44.763, - 54.901, - 46.712, - 35.022, - 19.033, - 3.965, - 0.585, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 7.439, - 18.077, - 25.212, - 28.062, - 45.499, - 54.587, - 46.349, - 34.792, - 18.868, - 4.401, - 0.678, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.773, - 15.248, - 21.927, - 24.44, - 40.617, - 51.657, - 44.169, - 33.46, - 18.434, - 4.089, - 0.678, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 5.265, - 14.668, - 21.028, - 26.822, - 54.044, - 50.098, - 42.874, - 32.398, - 17.733, - 4.321, - 0.677, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 4.454, - 14.263, - 20.798, - 26.803, - 55.028, - 40.113, - 43.575, - 32.629, - 16.485, - 4.7, - 0.78, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 4.842, - 14.411, - 20.843, - 23.97, - 38.83, - 51.211, - 43.832, - 32.857, - 18.14, - 4.442, - 0.793, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - -0.0, - 8.163, - 14.512, - 7.109, - 0.0, - 0.201, - 30.39, - 13.747, - 18.154, - 4.591, - 0.888, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 4.855, - 13.985, - 19.912, - 23.653, - 33.088, - 36.726, - 37.538, - 29.956, - 15.21, - 4.994, - 0.92, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - -0.0, - 3.849, - 10.182, - 16.163, - 15.115, - 37.45, - 21.295, - 18.382, - 12.173, - 4.373, - 0.927, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 3.724, - 13.463, - 19.259, - 20.678, - 33.291, - 46.442, - 40.172, - 30.716, - 16.866, - 4.368, - 0.987, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.633, - 13.111, - 19.658, - 24.695, - 54.54, - 50.793, - 43.368, - 32.613, - 18.148, - 4.378, - 0.989, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 11.349, - 5.348, - 23.5, - 20.094, - 26.676, - 33.572, - 18.676, - 5.396, - 1.072, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 6.006, - 16.414, - 23.363, - 26.678, - 41.932, - 53.913, - 45.863, - 34.497, - 19.023, - 4.699, - 1.157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 8.311, - 19.418, - 26.574, - 29.815, - 46.715, - 56.092, - 47.79, - 36.033, - 20.152, - 4.618, - 1.122, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 9.04, - 19.876, - 26.743, - 28.939, - 42.97, - 55.153, - 46.948, - 35.421, - 19.627, - 4.458, - 1.049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.617, - 16.171, - 22.051, - 24.433, - 39.065, - 50.496, - 42.678, - 32.551, - 18.622, - 4.342, - 1.163, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.352, - 14.969, - 20.756, - 22.871, - 36.844, - 49.957, - 43.208, - 33.005, - 18.709, - 4.543, - 1.115, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 4.47, - 14.579, - 21.535, - 26.698, - 56.554, - 52.834, - 45.218, - 34.229, - 19.277, - 4.549, - 1.128, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 6.552, - 15.364, - 22.126, - 27.146, - 41.877, - 54.14, - 46.272, - 34.889, - 19.63, - 4.646, - 1.257, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 6.133, - 16.368, - 23.242, - 26.412, - 41.658, - 53.497, - 45.556, - 34.347, - 19.347, - 4.545, - 1.203, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 5.229, - 14.319, - 19.62, - 21.045, - 35.156, - 49.269, - 43.136, - 33.018, - 18.763, - 4.849, - 1.28, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 3.669, - 13.449, - 20.14, - 23.269, - 37.038, - 51.032, - 43.692, - 32.655, - 18.555, - 5.009, - 1.194, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 4.961, - 15.199, - 22.015, - 25.207, - 38.888, - 52.773, - 45.119, - 34.148, - 19.4, - 4.734, - 1.246, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 4.787, - 14.407, - 20.21, - 22.296, - 36.099, - 50.012, - 43.327, - 33.147, - 19.03, - 4.928, - 1.335, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 4.725, - 14.006, - 19.284, - 27.672, - 52.741, - 49.575, - 43.106, - 32.965, - 18.864, - 5.052, - 1.33, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.576, - 12.886, - 19.272, - 22.487, - 36.769, - 50.452, - 42.884, - 32.765, - 18.712, - 4.987, - 1.287, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 3.658, - 12.923, - 19.025, - 21.558, - 34.905, - 49.985, - 42.955, - 32.721, - 18.678, - 4.9, - 1.234, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.179, - 13.953, - 20.553, - 23.733, - 36.972, - 51.396, - 44.049, - 33.516, - 19.181, - 4.834, - 1.269, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 3.643, - 13.183, - 19.73, - 22.901, - 35.515, - 51.032, - 43.82, - 33.368, - 19.193, - 4.867, - 1.261, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.311, - 12.711, - 17.964, - 21.692, - 34.582, - 50.56, - 43.574, - 32.348, - 18.461, - 4.903, - 1.175, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 0.0, - 12.528, - 18.894, - 21.402, - 30.913, - 43.958, - 39.055, - 29.115, - 15.835, - 5.223, - 1.266, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 0.721, - 10.356, - 20.182, - 24.418, - 52.039, - 50.761, - 44.674, - 34.043, - 19.652, - 4.959, - 1.219, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.322, - 10.6, - 17.002, - 20.167, - 31.205, - 48.086, - 26.47, - 15.629, - 18.039, - 5.217, - 1.341, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 2.386, - 11.771, - 18.406, - 21.583, - 33.123, - 49.936, - 42.954, - 32.697, - 18.885, - 5.208, - 1.316, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.704, - 15.131, - 22.418, - 25.81, - 38.65, - 53.173, - 45.579, - 34.613, - 19.982, - 5.108, - 1.257, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 5.161, - 14.565, - 20.155, - 22.926, - 37.064, - 51.586, - 44.879, - 34.493, - 20.025, - 5.105, - 1.24, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.537, - 12.693, - 19.271, - 22.836, - 35.324, - 51.569, - 44.571, - 34.115, - 19.935, - 4.871, - 0.946, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 4.91, - 14.503, - 20.148, - 23.256, - 35.544, - 51.492, - 44.661, - 34.348, - 19.988, - 4.986, - 0.982, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 5.283, - 15.295, - 21.738, - 29.159, - 56.631, - 52.882, - 45.652, - 35.05, - 20.379, - 4.994, - 0.941, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 4.633, - 13.472, - 18.925, - 21.661, - 33.945, - 50.046, - 43.446, - 33.611, - 19.566, - 4.796, - 0.875, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 2.837, - 10.866, - 16.911, - 10.472, - 31.729, - 47.203, - 40.77, - 31.077, - 18.714, - 5.485, - 1.253, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 1.165, - 10.401, - 16.693, - 21.95, - 51.266, - 42.79, - 41.975, - 32.135, - 18.563, - 5.379, - 1.285, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 0.863, - 10.245, - 16.726, - 20.143, - 24.59, - 42.523, - 41.881, - 31.998, - 18.717, - 5.734, - 1.427, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 2.839, - 12.81, - 19.742, - 23.09, - 33.978, - 51.587, - 44.486, - 34.014, - 19.731, - 4.984, - 0.988, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 3.894, - 14.177, - 21.076, - 24.488, - 35.337, - 52.516, - 45.196, - 34.69, - 20.355, - 5.262, - 0.959, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.85, - 12.421, - 19.031, - 25.046, - 54.254, - 50.85, - 43.836, - 33.117, - 19.515, - 6.092, - 1.441, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 0.0, - 6.28, - 8.192, - 4.037, - 7.126, - 24.456, - 20.07, - 25.914, - 16.734, - 5.732, - 1.272, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 3.899, - 14.529, - 22.298, - 25.79, - 37.482, - 53.625, - 46.411, - 35.615, - 20.781, - 5.357, - 0.924, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 4.214, - 14.177, - 20.847, - 24.196, - 35.338, - 52.463, - 45.448, - 34.934, - 20.308, - 5.168, - 0.864, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 3.828, - 13.418, - 19.724, - 23.133, - 33.654, - 51.301, - 44.348, - 34.03, - 19.837, - 5.133, - 0.941, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 1.236, - -0.0, - -0.0, - 0.0, - 18.847, - 40.562, - 31.423, - 19.106, - 5.418, - 1.015, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.259, - 10.874, - 17.664, - 20.976, - 29.153, - 49.194, - 42.706, - 32.613, - 18.947, - 5.512, - 1.013, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 2.337, - 12.323, - 19.181, - 23.778, - 54.379, - 51.035, - 44.098, - 33.89, - 19.893, - 5.19, - 0.899, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 3.661, - 13.594, - 20.23, - 23.636, - 33.843, - 51.689, - 44.66, - 34.316, - 20.127, - 5.29, - 0.904, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 4.079, - 14.348, - 21.249, - 24.797, - 35.119, - 52.73, - 45.402, - 34.726, - 20.321, - 5.111, - 0.761, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 3.725, - 13.991, - 21.268, - 24.94, - 35.042, - 53.177, - 46.006, - 35.389, - 20.842, - 5.169, - 0.761, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 3.852, - 14.145, - 21.314, - 24.837, - 35.024, - 53.1, - 45.692, - 35.025, - 20.589, - 5.263, - 0.758, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 3.401, - 13.529, - 20.459, - 23.83, - 33.531, - 51.979, - 44.726, - 34.189, - 19.972, - 5.248, - 0.838, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 1.771, - 11.464, - 18.211, - 21.644, - 30.508, - 49.743, - 42.898, - 32.53, - 18.99, - 5.193, - 0.535, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 10.888, - 11.162, - 18.86, - 0.0, - 0.0, - 10.346, - 1.306, - 5.53, - 0.936, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 1.295, - 11.128, - 18.209, - 21.777, - 30.601, - 50.287, - 43.517, - 33.408, - 19.6, - 5.261, - 0.774, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 2.72, - 12.778, - 19.792, - 23.335, - 32.374, - 51.851, - 44.677, - 34.218, - 19.821, - 5.31, - 0.774, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 2.8, - 12.813, - 19.445, - 22.93, - 32.315, - 51.529, - 44.587, - 34.32, - 20.01, - 5.292, - 0.715, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 2.138, - 12.016, - 19.038, - 22.496, - 31.273, - 51.046, - 43.987, - 33.637, - 19.598, - 5.241, - 0.659, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 2.491, - 12.456, - 19.237, - 22.595, - 31.879, - 51.135, - 44.168, - 33.831, - 19.669, - 5.222, - 0.651, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 2.691, - 12.625, - 19.18, - 22.62, - 31.699, - 50.491, - 43.693, - 33.603, - 19.708, - 5.108, - 0.548, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 2.555, - 12.348, - 19.129, - 22.588, - 51.187, - 51.297, - 44.192, - 33.823, - 19.725, - 5.194, - 0.533, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 2.188, - 11.82, - 18.587, - 21.928, - 30.727, - 50.068, - 42.899, - 32.558, - 19.188, - 5.436, - 0.467, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 12.412, - 13.183, - 15.556, - 16.167, - 32.568, - 43.892, - 33.377, - 19.503, - 5.271, - 0.449, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 2.201, - 11.974, - 18.955, - 22.778, - 32.006, - 51.2, - 44.501, - 33.995, - 20.006, - 5.122, - 0.413, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 2.947, - 12.654, - 19.397, - 22.525, - 31.932, - 51.161, - 44.221, - 33.83, - 19.677, - 5.054, - 0.374, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 2.65, - 12.686, - 19.338, - 22.843, - 31.923, - 39.356, - 43.692, - 33.165, - 19.405, - 5.504, - 0.355, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.863, - 13.407, - 20.638, - 24.459, - 34.598, - 52.69, - 45.615, - 34.72, - 20.455, - 5.263, - 0.366, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 5.867, - 16.87, - 24.556, - 28.183, - 54.556, - 55.75, - 47.876, - 36.424, - 21.073, - 5.128, - 0.256, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.304, - 15.956, - 23.041, - 26.764, - 37.419, - 54.527, - 46.883, - 35.758, - 20.784, - 5.026, - 0.257, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.314, - 15.637, - 22.276, - 26.085, - 37.297, - 54.446, - 46.984, - 35.965, - 20.961, - 4.999, - 0.216, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.166, - 15.723, - 22.861, - 26.646, - 37.549, - 54.728, - 47.246, - 36.049, - 21.004, - 5.092, - 0.221, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 4.822, - 15.366, - 22.529, - 26.292, - 37.029, - 54.458, - 47.003, - 35.926, - 20.841, - 4.885, - 0.247, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 5.132, - 16.139, - 23.431, - 27.073, - 37.354, - 54.864, - 47.096, - 35.832, - 20.683, - 4.809, - 0.208, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 3.69, - 13.992, - 20.86, - 24.119, - 33.506, - 52.076, - 44.491, - 33.791, - 19.569, - 4.504, - 0.162, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 3.429, - 13.332, - 20.191, - 23.716, - 48.398, - 52.05, - 44.771, - 34.08, - 19.5, - 4.438, - 0.121, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 2.89, - 11.235, - 9.62, - 23.492, - 32.335, - 43.138, - 32.668, - 29.469, - 17.761, - 4.427, - 0.044, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 2.98, - 12.93, - 19.465, - 22.887, - 32.002, - 51.021, - 43.996, - 33.062, - 18.401, - 4.846, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 2.664, - 12.369, - 18.615, - 21.991, - 31.002, - 50.008, - 42.866, - 32.014, - 17.905, - 4.693, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.702, - 12.609, - 19.768, - 23.207, - 32.258, - 51.535, - 44.363, - 33.357, - 18.753, - 4.55, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 3.833, - 14.156, - 21.387, - 24.977, - 34.578, - 52.946, - 45.366, - 34.484, - 19.559, - 4.277, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 5.122, - 10.919, - 23.073, - 21.217, - 36.709, - 54.235, - 46.362, - 35.065, - 19.837, - 4.21, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 5.596, - 15.89, - 22.642, - 26.211, - 49.038, - 53.85, - 46.161, - 34.846, - 19.577, - 4.102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 4.892, - 15.189, - 21.818, - 24.946, - 35.336, - 52.62, - 44.947, - 33.935, - 18.883, - 4.165, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.95, - 15.382, - 22.321, - 25.569, - 35.428, - 53.055, - 45.153, - 33.843, - 18.947, - 4.011, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - 6.193, - 17.118, - 24.192, - 27.776, - 38.887, - 54.897, - 46.877, - 35.375, - 19.814, - 4.01, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.956, - 15.403, - 22.433, - 25.824, - 36.533, - 53.562, - 45.666, - 34.336, - 19.141, - 3.881, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.512, - 14.04, - 21.138, - 24.639, - 33.763, - 44.73, - 38.087, - 28.109, - 17.711, - 3.829, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.342, - 20.105, - 15.563, - 20.939, - 43.789, - 11.106, - 6.74, - 15.646, - 3.846, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.206, - 13.382, - 20.655, - 24.159, - 40.699, - 51.962, - 44.49, - 33.046, - 18.11, - 3.497, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 3.317, - 12.908, - 19.823, - 23.363, - 33.134, - 51.387, - 43.821, - 32.894, - 17.934, - 3.311, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.647, - 11.938, - 18.134, - 20.888, - 30.397, - 49.16, - 29.063, - 18.127, - 15.679, - 3.414, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 3.169, - 13.182, - 20.518, - 24.03, - 29.806, - 23.293, - 2.215, - 32.155, - 4.061, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.608, - 11.198, - 18.529, - 21.523, - 29.773, - 49.571, - 36.817, - 27.009, - 18.03, - 3.263, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.658, - 14.937, - 21.822, - 25.354, - 36.675, - 53.074, - 45.153, - 33.557, - 17.951, - 3.17, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 4.47, - 13.351, - 20.358, - 23.724, - 0.0, - 0.0, - -0.0, - 32.928, - 17.546, - 3.034, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 4.559, - 14.8, - 21.577, - 24.692, - 34.951, - 17.646, - 14.164, - 3.262, - 11.961, - 3.064, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.346, - 14.514, - 21.155, - 23.987, - 38.147, - 50.832, - 42.945, - 31.641, - 16.52, - 2.936, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.007, - 13.715, - 20.232, - 22.949, - 32.59, - 49.817, - 42.235, - 11.33, - 16.261, - 1.282, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.29, - 14.191, - 21.243, - 24.484, - 34.561, - 51.9, - 43.936, - 32.105, - 16.685, - 2.624, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.469, - 14.661, - 21.761, - 25.041, - 35.52, - 52.583, - 43.955, - 31.639, - 16.266, - 2.521, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.692, - 18.439, - 25.556, - 28.628, - 41.04, - 55.536, - 46.825, - 34.511, - 17.592, - 2.6, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.349, - 19.284, - 26.474, - 29.752, - 42.418, - 55.775, - 47.001, - 34.528, - 17.718, - 2.464, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 6.355, - 16.826, - 24.358, - 27.833, - 40.036, - 54.604, - 46.25, - 34.163, - 17.484, - 2.297, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.448, - 16.63, - 23.262, - 25.68, - 36.955, - 50.734, - 42.48, - 31.538, - 16.276, - 2.08, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.631, - 15.332, - 21.731, - 24.116, - 34.74, - 49.249, - 41.64, - 30.716, - 15.672, - 2.034, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 5.177, - 15.28, - 21.904, - 25.094, - 36.219, - 52.026, - 43.213, - 30.807, - 14.097, - 1.609, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 3.301, - 14.493, - 23.27, - 26.25, - 34.453, - 52.892, - 43.364, - 29.939, - 15.488, - 1.828, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 9.936, - 21.756, - 29.988, - 33.173, - 46.749, - 58.737, - 48.937, - 35.461, - 17.661, - 1.827, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 11.197, - 23.189, - 30.651, - 33.173, - 49.066, - 58.651, - 49.066, - 35.842, - 17.752, - 1.724, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 10.501, - 21.767, - 29.044, - 31.882, - 46.321, - 56.684, - 47.386, - 34.467, - 17.208, - 1.465, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.522, - 18.85, - 25.203, - 27.633, - 41.258, - 52.86, - 44.668, - 32.809, - 16.191, - 1.228, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 7.428, - 18.968, - 26.614, - 29.869, - 41.872, - 55.885, - 47.012, - 33.628, - 16.158, - 1.036, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 9.695, - 20.352, - 26.828, - 29.139, - 42.938, - 53.796, - 44.996, - 32.574, - 16.007, - 0.924, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.891, - 18.831, - 25.809, - 28.911, - 42.229, - 54.208, - 45.098, - 32.014, - 15.045, - 0.806, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.558, - 17.478, - 26.815, - 30.453, - 40.374, - 56.224, - 47.029, - 33.967, - 16.1, - 0.824, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 11.026, - 22.575, - 29.784, - 32.661, - 47.474, - 57.267, - 47.551, - 33.995, - 15.888, - 0.704, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 10.218, - 21.295, - 28.018, - 30.533, - 44.647, - 54.894, - 45.455, - 32.599, - 15.276, - 0.579, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 9.671, - 20.442, - 27.254, - 29.689, - 43.455, - 53.991, - 44.928, - 32.23, - 14.983, - 0.454, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.132, - 17.578, - 24.882, - 27.975, - 40.379, - 54.23, - 45.247, - 32.353, - 14.763, - 0.375, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.481, - 18.931, - 25.447, - 28.016, - 41.777, - 53.452, - 44.647, - 31.944, - 14.564, - 0.287, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.121, - 18.993, - 18.147, - 14.745, - 26.176, - 33.094, - 14.815, - 32.192, - 14.525, - 0.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 6.393, - 16.511, - 18.64, - 20.988, - 31.461, - 43.473, - 31.515, - 20.857, - 6.288, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 7.319, - 11.956, - 19.367, - 15.955, - 8.605, - 35.17, - 19.662, - 20.814, - 3.178, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.156, - 16.764, - 23.675, - 26.738, - 39.197, - 52.733, - 43.556, - 30.621, - 13.319, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.757, - 17.049, - 23.942, - 26.909, - 32.511, - 52.81, - 43.549, - 30.604, - 13.239, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 7.844, - 18.553, - 25.918, - 28.765, - 41.023, - 54.077, - 44.49, - 30.685, - 12.92, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 9.238, - 21.021, - 28.083, - 30.998, - 42.748, - 55.891, - 32.812, - 21.028, - 0.769, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 21.915, - -0.0, - 31.996, - 30.451, - -0.0, - 0.0, - 32.668, - 0.168, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 12.037, - 23.496, - 30.354, - 33.112, - -0.0, - 8.642, - 0.856, - 1.343, - 6.991, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.636, - 22.645, - 29.207, - 31.5, - 45.873, - 55.153, - 45.529, - 31.23, - 12.696, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 10.403, - 21.075, - 27.737, - 29.83, - 43.294, - 54.173, - 44.731, - 31.333, - 12.684, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 9.845, - 20.208, - 25.56, - 26.893, - 40.482, - 51.807, - 42.975, - 30.31, - 12.358, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.76, - 19.418, - 16.164, - 17.604, - 40.894, - 52.737, - 42.698, - 28.876, - 11.299, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.488, - 20.09, - 26.225, - 28.214, - 40.378, - 52.474, - 43.029, - 29.587, - 11.34, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.59, - 20.453, - 26.809, - 29.132, - 42.136, - 53.42, - 43.529, - 29.887, - 11.653, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.186, - 19.379, - 25.036, - 26.335, - 38.25, - 49.977, - 41.59, - 29.048, - 11.283, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.586, - 9.588, - 17.179, - 24.998, - 30.238, - 39.987, - 42.081, - 24.675, - 10.106, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 5.578, - 16.714, - 23.008, - 25.543, - 33.561, - 51.669, - 42.205, - 28.219, - 9.485, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 7.904, - 18.48, - 25.455, - 28.308, - 39.289, - 53.097, - 43.473, - 29.271, - 10.309, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.403, - 20.42, - 27.008, - 29.052, - 40.327, - 52.267, - 42.641, - 28.651, - 10.097, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 10.312, - 21.065, - 27.448, - 29.334, - 41.002, - 52.306, - 42.806, - 28.973, - 10.042, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.968, - 18.807, - 25.685, - 28.596, - 40.323, - 53.31, - 43.558, - 29.134, - 9.09, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 8.941, - 19.747, - 25.796, - 27.769, - 37.378, - 51.826, - 42.618, - 28.587, - 8.488, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.751, - 19.3, - 24.771, - 26.32, - 35.205, - 50.504, - 41.208, - 27.587, - 8.425, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.369, - 20.123, - 26.768, - 29.081, - 38.363, - 52.999, - 43.082, - 28.534, - 9.375, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.479, - 19.846, - 26.11, - 28.107, - 36.934, - 51.758, - 42.084, - 27.927, - 8.656, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 6.552, - 17.615, - 24.614, - 26.829, - 32.329, - 45.237, - 21.373, - 15.397, - 3.951, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 6.526, - 18.328, - 25.127, - 27.673, - 32.384, - 51.002, - 39.475, - 24.195, - 6.128, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 8.694, - 21.027, - 28.423, - 31.797, - 38.239, - 56.366, - 46.074, - 30.184, - 9.126, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.079, - 23.36, - 30.004, - 31.858, - 41.123, - 55.159, - 44.808, - 29.943, - 9.169, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.639, - 22.909, - 29.382, - 31.159, - 39.974, - 53.734, - 43.437, - 28.532, - 8.384, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 10.441, - 21.098, - 27.733, - 29.656, - 37.669, - 53.073, - 42.893, - 27.912, - 7.809, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 10.085, - 20.573, - 26.343, - 27.951, - 35.305, - 34.349, - 37.732, - 21.475, - 7.337, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.334, - 5.407, - 24.053, - 26.489, - 34.208, - 51.585, - 42.2, - 27.414, - 2.347, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 9.339, - 21.668, - 20.253, - 3.182, - 1.2, - 53.521, - 30.443, - 24.998, - 5.205, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 8.626, - 20.365, - 27.129, - 28.968, - 33.291, - 53.33, - 43.212, - 28.24, - 6.986, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 11.772, - 23.71, - 30.802, - 33.082, - 40.276, - 55.8, - 44.556, - 28.918, - 6.692, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 10.37, - 22.008, - 28.829, - 31.027, - 37.221, - 54.058, - 43.428, - 27.471, - 5.801, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 8.937, - 20.264, - 27.125, - 29.52, - 33.983, - 52.883, - 42.124, - 27.094, - 5.506, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 8.38, - 19.274, - 25.581, - 27.249, - 31.014, - 50.872, - 41.09, - 26.9, - 5.369, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 7.901, - 18.221, - 24.09, - 26.473, - 30.822, - 50.971, - 40.976, - 26.458, - 5.143, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.726, - 18.539, - 24.832, - 26.654, - 29.396, - 50.082, - 40.022, - 25.226, - 4.373, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 6.894, - 16.145, - 22.026, - 25.279, - 14.14, - 50.629, - 40.747, - 25.631, - 4.503, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.245, - 19.504, - 26.811, - 29.213, - 32.233, - 52.727, - 42.142, - 26.23, - 4.243, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.615, - 16.662, - 24.945, - 27.441, - 25.496, - 34.494, - 38.758, - 22.93, - 0.177, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 16.838, - 24.682, - 27.441, - 25.787, - 42.019, - 41.615, - 26.146, - 4.354, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 17.489, - 24.43, - 15.951, - 8.554, - 12.973, - 28.853, - 16.034, - 0.172, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.683, - 0.0, - 25.492, - 28.496, - 26.996, - 34.94, - 42.369, - 26.204, - 1.041, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.049, - 18.346, - 25.615, - 28.392, - 28.368, - 52.155, - 41.303, - 25.509, - 3.479, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 10.68, - 23.429, - 30.675, - 33.006, - 35.97, - 55.921, - 44.926, - 28.015, - 4.2, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.616, - 20.609, - 27.914, - 30.245, - 32.183, - 53.307, - 42.705, - 21.744, - 0.572, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 20.009, - 12.59, - 18.27, - -0.0, - 0.0, - 6.376, - 21.333, - 0.481, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 17.152, - 6.661, - 8.469, - -0.0, - 20.38, - 41.388, - 25.269, - 2.585, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.228, - 17.828, - 25.302, - 17.74, - 9.811, - 34.875, - 15.526, - 5.397, - 0.037, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.433, - 19.05, - 25.603, - 27.813, - 27.054, - 51.205, - 40.825, - 25.097, - 2.723, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.536, - 24.159, - 27.215, - 25.496, - 32.08, - 40.953, - 16.43, - 0.485, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 8.368, - 20.8, - 28.619, - 31.437, - 31.162, - 54.6, - 43.386, - 27.085, - 0.534, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.316, - 19.555, - 26.573, - 29.512, - 27.868, - 42.239, - 43.347, - 27.122, - 3.194, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.224, - 18.375, - 24.503, - 27.639, - 26.241, - 40.556, - 41.426, - 26.084, - 3.058, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.599, - 17.827, - 24.265, - 25.721, - 23.68, - 39.486, - 40.532, - 25.977, - 3.288, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.218, - 13.943, - 11.647, - 8.653, - 23.858, - 39.1, - 24.543, - 2.446, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 16.044, - 24.184, - 27.737, - 26.374, - 30.386, - 42.159, - 26.814, - 3.296, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.877, - 17.267, - 24.662, - 27.98, - 26.4, - 50.518, - 41.658, - 9.746, - 0.033, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - -0.0, - -0.0, - 0.0, - -0.0, - 0.0, - 4.148, - 2.609, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.246, - 5.636, - 12.138, - 8.723, - 12.15, - 26.043, - 10.925, - 1.33, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - -0.0, - -0.0, - 6.251, - -0.0, - 24.022, - 1.01, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 17.436, - 0.0, - 2.829, - 6.59, - 0.0, - -0.0, - 26.153, - 0.298, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 5.927, - 19.803, - 27.648, - 30.987, - 29.417, - 51.338, - 44.242, - 27.075, - 0.347, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.591, - 17.117, - 24.567, - 28.009, - 14.288, - 49.117, - 28.104, - 18.831, - 2.189, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.817, - 17.979, - 25.628, - 28.807, - 27.147, - 30.793, - 42.241, - 26.221, - 2.482, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.753, - 18.978, - 27.314, - 30.589, - 28.788, - 49.857, - 43.622, - 26.801, - 2.512, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 6.077, - 19.418, - 22.656, - 22.248, - 28.098, - 38.385, - 43.233, - 27.44, - 2.862, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.119, - 17.364, - 25.511, - 29.44, - 28.819, - 11.688, - 11.743, - 26.74, - 2.438, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.946, - 5.538, - -0.0, - 28.626, - 0.0, - -0.0, - -0.0, - 12.014, - 1.73, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.875, - 18.895, - 27.406, - 31.13, - 29.671, - 48.99, - 44.107, - 27.955, - 2.984, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.455, - 18.972, - 27.367, - 30.623, - 28.976, - 48.686, - 43.936, - 27.891, - 3.245, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 16.751, - 24.032, - 26.165, - 25.421, - 29.559, - 42.267, - 26.814, - 2.967, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 17.215, - 8.345, - 7.767, - 5.078, - -0.0, - 13.585, - 27.248, - 0.436, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.847, - 18.927, - 27.874, - 31.806, - 30.681, - 49.205, - 45.738, - 29.44, - 4.245, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.856, - 18.095, - 26.031, - 29.119, - 27.63, - 46.857, - 43.779, - 28.434, - 0.515, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 15.995, - 12.879, - 12.961, - 26.939, - 16.962, - 38.23, - 27.997, - 4.088, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.455, - 17.837, - 25.9, - 28.978, - 27.539, - 45.665, - 43.835, - 28.459, - 3.956, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 3.274, - 16.52, - 22.742, - 25.267, - 24.875, - 43.403, - 41.963, - 26.794, - 3.136, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 15.416, - 27.996, - 12.996, - 23.613, - 38.332, - 29.251, - 3.1, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.14, - 15.696, - 23.887, - 11.604, - 27.066, - 43.995, - 43.518, - 27.835, - 3.986, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.178, - 15.78, - 24.16, - 27.863, - 26.746, - 19.386, - 35.382, - 8.688, - 0.211, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 1.356, - 15.997, - 24.09, - 27.865, - 26.878, - 43.893, - 38.632, - 27.822, - 0.957, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.736, - 18.906, - 27.744, - 31.115, - 16.966, - 27.135, - 29.567, - 11.956, - 0.401, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 4.307, - 18.302, - 26.646, - 19.176, - 22.067, - 46.266, - 45.32, - 30.476, - 6.111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 2.236, - 15.792, - 10.449, - 13.207, - 9.39, - 23.939, - 25.58, - 12.103, - 0.437, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 8.358, - 15.162, - -0.0, - -0.0, - 28.319, - 1.342, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.699, - -0.0, - 0.0, - -0.0, - -0.0, - -0.0, - 6.439, - 0.226, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - -0.0, - 4.003, - 4.854, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - -0.0, - -0.0, - 6.401, - 0.304, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - -0.0, - -0.0, - 13.874, - 23.884, - 28.014, - 11.32, - 24.822, - 44.869, - 20.658, - 8.033, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "size_kw": 81.6667, - "lifecycle_om_cost_after_tax_bau": 6256.0, - "name": "ground", - "annual_energy_produced_kwh": 145904.83, - "year_one_energy_produced_kwh_bau": 74767.0, - "year_one_energy_produced_kwh": 152649.0, - "annual_energy_exported_kwh": 0.0, - "electric_to_storage_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.232, - 31.876, - 31.876, - 31.876, - 12.998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.198, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 15.795, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.189, - 15.527, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.276, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.961, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 10.032, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.677, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 15.316, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.353, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 10.64, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.795, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 10.198, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.067, - 16.044, - 31.876, - 31.876, - 31.876, - 31.876, - 31.759, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.136, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.856, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.306, - 2.02, - 13.174, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.043, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 10.95, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.369, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 10.624, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.034, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.959, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.461, - 31.876, - 31.876, - 31.876, - 31.876, - 26.914, - 19.495, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.146, - 31.225, - 31.876, - 31.876, - 31.876, - 31.876, - 11.498, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.53, - 31.529, - 31.876, - 31.876, - 31.876, - 31.876, - 10.81, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.699, - 23.467, - 25.713, - 31.876, - 31.876, - 31.876, - 26.866, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.222, - 3.098, - 14.268, - 24.046, - 21.599, - 31.876, - 31.876, - 26.254, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.654, - 31.876, - 31.876, - 31.876, - 31.876, - 23.103, - 4.172, - 6.109, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.695, - 13.218, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 2.08, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.909, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.084, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.463, - 31.812, - 31.876, - 31.876, - 31.876, - 31.876, - 9.595, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.306, - 12.259, - 13.412, - 20.428, - 20.384, - 21.601, - 17.878, - 5.975, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.942, - 11.808, - 7.379, - 12.797, - 0.334, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.856, - 18.51, - 31.876, - 1.78, - 31.876, - 31.876, - 31.876, - 0.871, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.833, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 8.16, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.689, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 6.303, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.653, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 6.34, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.503, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 14.49, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.746, - 20.339, - 31.876, - 31.876, - 31.876, - 31.876, - 27.783, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.578, - 30.29, - 31.876, - 31.876, - 31.876, - 31.876, - 11.001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.345, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 5.648, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 13.545, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 4.448, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.879, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 5.114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.82, - 17.011, - 28.428, - 31.876, - 31.876, - 31.876, - 31.876, - 1.611, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 13.157, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 4.836, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.936, - 24.128, - 31.876, - 31.876, - 31.876, - 31.876, - 18.805, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.048, - 14.344, - 28.422, - 28.78, - 23.002, - 31.876, - 31.876, - 13.026, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.045, - 22.708, - 31.876, - 31.876, - 31.876, - 11.601, - 13.034, - 7.213, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.593, - 13.825, - 6.085, - 14.029, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 17.993, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.473, - 31.876, - 29.934, - 31.876, - 31.876, - 31.876, - 7.462, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 14.273, - 31.876, - 31.876, - 24.006, - 31.876, - 31.876, - 11.591, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.351, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 2.642, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.993, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 13.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.838, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 2.155, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.432, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 2.561, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.19, - 21.148, - 26.483, - 31.876, - 29.148, - 16.643, - 31.876, - 16.01, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.957, - 1.547, - 2.061, - 7.237, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 16.097, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 1.895, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.352, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 2.641, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 15.225, - 10.512, - 9.869, - 6.742, - 31.876, - 31.876, - 31.876, - 31.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.303, - 31.876, - 31.876, - 31.876, - 31.876, - 31.566, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.404, - 31.876, - 31.876, - 31.876, - 31.876, - 31.465, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 17.452, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.541, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 17.086, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.906, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.293, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 17.7, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 19.386, - 31.876, - 31.876, - 31.876, - 31.876, - 30.483, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.006, - 22.408, - 17.817, - 24.96, - 31.876, - 5.358, - 31.876, - 22.334, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.09, - 21.122, - 26.598, - 31.876, - 31.876, - 31.876, - 28.936, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.049, - 8.037, - 21.429, - 31.876, - 31.876, - 31.876, - 31.876, - 20.354, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.38, - 18.101, - 31.876, - 31.876, - 31.876, - 31.876, - 31.388, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.5, - 18.603, - 31.876, - 31.876, - 31.876, - 31.876, - 30.766, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.181, - 8.624, - 20.991, - 27.189, - 31.876, - 31.876, - 31.876, - 24.76, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.132, - 19.436, - 31.876, - 31.876, - 31.876, - 31.876, - 29.301, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.615, - 21.032, - 31.876, - 31.876, - 31.876, - 31.876, - 27.223, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.725, - 15.069, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 2.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.751, - 20.119, - 28.581, - 31.876, - 31.876, - 31.876, - 31.294, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.738, - 12.117, - 26.02, - 31.876, - 31.876, - 31.876, - 31.876, - 9.995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.123, - 20.777, - 31.876, - 31.876, - 31.876, - 31.876, - 26.969, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.292, - 20.534, - 31.876, - 31.876, - 31.876, - 31.876, - 27.043, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.715, - 21.28, - 31.876, - 31.876, - 31.876, - 31.876, - 25.875, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.883, - 21.31, - 31.876, - 31.876, - 31.876, - 31.876, - 25.676, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.777, - 20.16, - 31.876, - 31.876, - 31.876, - 31.876, - 26.932, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.424, - 22.35, - 31.876, - 31.876, - 31.876, - 31.876, - 24.095, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.638, - 22.832, - 31.876, - 31.876, - 31.876, - 31.876, - 23.4, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.763, - 22.924, - 31.876, - 31.876, - 31.876, - 31.876, - 23.183, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.599, - 12.464, - 23.196, - 31.876, - 31.876, - 31.876, - 31.876, - 12.61, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.79, - 21.307, - 31.876, - 31.876, - 31.876, - 31.876, - 24.773, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.749, - 20.538, - 31.876, - 31.876, - 31.876, - 31.876, - 25.582, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.069, - 21.391, - 28.331, - 31.876, - 31.876, - 31.876, - 27.955, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.942, - 20.637, - 27.404, - 31.876, - 31.876, - 31.876, - 29.763, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.103, - 20.859, - 31.876, - 31.876, - 31.876, - 31.876, - 24.907, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.654, - 22.665, - 31.876, - 31.876, - 31.876, - 31.876, - 13.049, - 9.502, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.656, - 22.754, - 31.876, - 31.876, - 31.876, - 31.876, - 22.46, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.758, - 21.794, - 31.876, - 31.876, - 31.876, - 31.876, - 23.317, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.802, - 12.383, - 26.552, - 31.876, - 31.876, - 31.876, - 31.876, - 6.133, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.595, - 25.037, - 31.876, - 31.876, - 31.876, - 31.876, - 19.237, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.448, - 23.377, - 31.876, - 31.876, - 31.876, - 31.876, - 21.044, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.935, - 25.388, - 31.876, - 31.876, - 31.876, - 31.876, - 18.546, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.956, - 24.779, - 31.876, - 31.876, - 31.876, - 31.876, - 19.134, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.862, - 23.101, - 31.876, - 31.876, - 31.876, - 31.876, - 20.906, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.068, - 23.511, - 25.978, - 31.876, - 31.876, - 31.876, - 26.189, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.397, - 24.875, - 31.876, - 31.876, - 31.876, - 31.876, - 18.598, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.72, - 25.163, - 31.876, - 31.876, - 31.876, - 31.876, - 17.986, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.855, - 25.259, - 31.876, - 31.876, - 31.876, - 31.876, - 17.755, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.075, - 23.983, - 31.876, - 31.876, - 31.876, - 31.876, - 20.812, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.823, - 24.142, - 31.876, - 31.876, - 31.876, - 31.876, - 15.091, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.03, - 25.165, - 31.876, - 31.876, - 31.876, - 31.876, - 17.674, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 24.845, - 23.148, - 31.876, - 10.299, - 31.876, - 31.876, - 23.453, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.301, - 24.984, - 23.14, - 31.876, - 31.876, - 31.876, - 26.32, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 24.366, - 31.876, - 11.311, - 1.359, - 4.486, - 2.099, - 8.289, - 8.164, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.412, - 26.719, - 31.876, - 31.876, - 31.876, - 31.876, - 17.738, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096, - 7.472, - 25.061, - 31.876, - 31.876, - 31.876, - 31.876, - 17.24, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.13, - 7.389, - 24.706, - 31.876, - 31.876, - 31.876, - 31.876, - 13.831, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.16, - 7.246, - 24.564, - 31.876, - 31.876, - 31.876, - 31.876, - 17.899, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.326, - 6.195, - 24.389, - 31.876, - 31.876, - 31.876, - 31.876, - 18.96, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.287, - 7.389, - 24.776, - 31.876, - 31.876, - 31.876, - 31.876, - 17.417, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.243, - 7.377, - 23.159, - 31.876, - 31.876, - 31.876, - 31.876, - 19.089, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.287, - 7.444, - 24.4, - 31.876, - 31.876, - 31.876, - 31.876, - 17.739, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.307, - 7.469, - 23.988, - 31.876, - 31.876, - 31.876, - 31.876, - 18.106, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.377, - 8.023, - 25.0, - 31.876, - 31.876, - 31.876, - 31.876, - 8.843, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.509, - 5.223, - 24.572, - 31.876, - 31.876, - 31.876, - 27.822, - 23.619, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.015, - 17.877, - 23.514, - 28.059, - 13.013, - 31.876, - 31.876, - 25.144, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.512, - 7.851, - 25.115, - 31.876, - 31.876, - 31.876, - 31.876, - 16.392, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.645, - 8.327, - 25.919, - 31.876, - 31.876, - 31.876, - 31.876, - 14.979, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.701, - 8.372, - 25.077, - 31.876, - 31.876, - 31.876, - 31.876, - 15.719, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.803, - 8.431, - 24.847, - 31.876, - 31.876, - 31.876, - 31.876, - 15.788, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.817, - 8.272, - 24.202, - 31.876, - 31.876, - 31.876, - 31.876, - 5.139, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.8, - 8.17, - 25.352, - 31.876, - 31.876, - 31.876, - 31.876, - 15.547, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.897, - 8.139, - 24.64, - 31.876, - 31.876, - 31.876, - 31.876, - 16.192, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.843, - 7.871, - 24.024, - 31.876, - 31.876, - 31.876, - 31.876, - 17.131, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.972, - 8.019, - 23.336, - 31.876, - 31.876, - 31.876, - 31.876, - 17.541, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.043, - 8.38, - 24.639, - 31.876, - 31.876, - 31.876, - 31.876, - 15.807, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.387, - 8.949, - 21.047, - 31.876, - 31.876, - 31.876, - 31.876, - 18.486, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.644, - 9.392, - 25.499, - 19.465, - 31.876, - 31.876, - 31.876, - 14.243, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.278, - 8.91, - 26.08, - 31.876, - 31.876, - 31.876, - 31.876, - 13.601, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.397, - 8.673, - 23.823, - 31.876, - 31.876, - 31.876, - 31.876, - 15.976, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.758, - 9.278, - 24.153, - 31.876, - 31.876, - 31.876, - 31.876, - 14.68, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.63, - 9.039, - 24.641, - 31.876, - 31.876, - 31.876, - 31.876, - 14.559, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.409, - 8.882, - 25.172, - 31.876, - 31.876, - 31.876, - 31.876, - 14.406, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.377, - 9.286, - 27.434, - 31.876, - 31.876, - 31.876, - 31.876, - 11.772, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.672, - 9.2, - 26.069, - 31.876, - 31.876, - 31.876, - 29.378, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.021, - 9.471, - 25.601, - 31.876, - 31.876, - 31.876, - 31.876, - 12.777, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.901, - 9.117, - 24.912, - 31.876, - 31.876, - 31.876, - 31.876, - 13.939, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.8, - 9.007, - 24.846, - 31.876, - 31.876, - 31.876, - 31.876, - 14.216, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.446, - 8.692, - 25.407, - 31.876, - 31.876, - 31.876, - 31.876, - 14.324, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.421, - 8.653, - 25.472, - 31.876, - 31.876, - 31.876, - 31.876, - 14.322, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.454, - 8.428, - 24.594, - 31.876, - 31.876, - 31.876, - 31.876, - 15.393, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.433, - 8.233, - 23.663, - 31.876, - 31.876, - 31.876, - 31.876, - 1.054, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.329, - 8.248, - 24.209, - 31.876, - 31.876, - 31.876, - 31.876, - 16.083, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.567, - 8.136, - 23.24, - 31.876, - 31.876, - 31.876, - 31.876, - 16.926, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.374, - 8.252, - 18.628, - 31.876, - 31.876, - 31.876, - 31.876, - 21.614, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.752, - 8.668, - 25.064, - 31.876, - 31.876, - 31.876, - 31.876, - 14.386, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.075, - 9.131, - 24.968, - 31.876, - 31.876, - 31.876, - 31.876, - 13.695, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.016, - 8.887, - 24.177, - 31.876, - 31.876, - 31.876, - 31.876, - 14.789, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.706, - 8.381, - 23.799, - 31.876, - 31.876, - 31.876, - 28.394, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.783, - 8.456, - 23.233, - 31.876, - 31.876, - 31.876, - 28.8, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.114, - 7.928, - 23.488, - 31.876, - 31.876, - 31.876, - 31.876, - 16.339, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.088, - 7.76, - 17.531, - 19.113, - 31.876, - 31.876, - 31.876, - 26.615, - 8.639, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.908, - 8.034, - 22.545, - 31.876, - 31.876, - 31.876, - 31.876, - 17.383, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.757, - 7.45, - 18.194, - 16.361, - 31.876, - 31.876, - 31.876, - 31.876, - 6.108, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.88, - 8.182, - 22.565, - 31.876, - 31.876, - 31.876, - 31.876, - 17.242, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.751, - 7.799, - 22.52, - 31.876, - 31.876, - 31.876, - 29.998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.493, - 4.87, - 13.008, - 9.85, - 12.102, - 31.876, - 31.876, - 31.876, - 31.876, - 8.546, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.963, - 8.124, - 23.639, - 31.876, - 31.876, - 31.876, - 31.876, - 16.144, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.803, - 8.419, - 25.374, - 31.876, - 31.876, - 31.876, - 31.876, - 14.274, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.632, - 8.42, - 25.707, - 31.876, - 31.876, - 31.876, - 31.876, - 14.11, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.584, - 8.055, - 24.262, - 31.876, - 31.876, - 31.876, - 31.876, - 15.968, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.716, - 7.809, - 23.518, - 31.876, - 31.876, - 31.876, - 31.876, - 16.825, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.632, - 7.557, - 22.759, - 31.876, - 31.876, - 31.876, - 30.064, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.638, - 8.096, - 23.515, - 31.876, - 31.876, - 31.876, - 31.876, - 16.621, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.927, - 7.924, - 23.9, - 31.876, - 31.876, - 31.876, - 31.876, - 16.118, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.771, - 7.774, - 23.496, - 31.876, - 31.876, - 31.876, - 31.876, - 16.828, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.85, - 7.594, - 22.606, - 31.876, - 31.876, - 31.876, - 31.876, - 17.819, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.747, - 7.409, - 22.853, - 31.876, - 31.876, - 31.876, - 31.876, - 17.86, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.909, - 7.67, - 22.98, - 31.876, - 31.876, - 31.876, - 31.876, - 17.311, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.844, - 7.558, - 22.93, - 31.876, - 31.876, - 31.876, - 25.696, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.203, - 7.935, - 22.315, - 31.876, - 31.876, - 31.876, - 31.876, - 17.416, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.841, - 7.529, - 22.154, - 31.876, - 31.876, - 31.876, - 31.876, - 18.346, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.796, - 7.315, - 22.481, - 31.876, - 31.876, - 31.876, - 31.876, - 18.276, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.621, - 6.98, - 22.15, - 31.876, - 31.876, - 31.876, - 31.876, - 19.119, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.558, - 6.924, - 21.959, - 31.876, - 31.876, - 31.876, - 31.876, - 19.428, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.702, - 6.879, - 19.296, - 31.724, - 31.876, - 31.876, - 31.876, - 22.145, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.719, - 7.15, - 20.02, - 31.876, - 31.876, - 31.876, - 29.176, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.664, - 6.797, - 20.874, - 31.876, - 31.876, - 31.876, - 31.876, - 20.534, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.618, - 6.902, - 21.027, - 31.876, - 31.876, - 31.876, - 31.876, - 20.323, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.704, - 7.16, - 22.42, - 31.876, - 31.876, - 31.876, - 31.876, - 18.584, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.831, - 7.265, - 23.056, - 31.876, - 31.876, - 31.876, - 31.876, - 17.717, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.504, - 6.7, - 22.049, - 31.876, - 31.876, - 31.876, - 31.876, - 19.616, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.212, - 6.487, - 22.695, - 31.876, - 31.876, - 31.876, - 31.876, - 19.476, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.207, - 6.535, - 22.814, - 31.876, - 31.876, - 31.876, - 27.736, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.165, - 6.6, - 22.665, - 31.876, - 31.876, - 31.876, - 31.876, - 19.439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.152, - 6.486, - 21.85, - 31.876, - 31.876, - 31.876, - 31.876, - 20.382, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.558, - 6.661, - 20.26, - 31.876, - 31.876, - 31.876, - 29.589, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.975, - 7.552, - 19.96, - 31.876, - 31.876, - 31.876, - 31.876, - 20.382, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.496, - 6.561, - 20.993, - 31.876, - 31.876, - 31.876, - 31.876, - 20.82, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.217, - 6.214, - 21.535, - 31.876, - 31.876, - 31.876, - 31.876, - 20.904, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.397, - 6.445, - 21.148, - 31.876, - 31.876, - 31.876, - 29.312, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.436, - 5.334, - 17.213, - 13.688, - 31.876, - 31.876, - 31.876, - 31.876, - 12.198, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.687, - 7.026, - 21.413, - 31.876, - 31.876, - 31.876, - 31.876, - 19.743, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.146, - 6.292, - 21.875, - 31.876, - 31.876, - 31.876, - 31.876, - 20.556, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.059, - 6.008, - 21.7, - 31.876, - 31.876, - 31.876, - 31.876, - 21.102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.361, - 4.818, - 16.861, - 25.918, - 31.876, - 22.631, - 29.625, - 29.76, - 15.524, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.51, - 5.761, - 19.947, - 31.876, - 31.876, - 31.876, - 31.876, - 23.651, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.13, - 5.861, - 20.52, - 31.876, - 31.876, - 31.876, - 30.723, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.989, - 5.959, - 21.428, - 31.876, - 31.876, - 31.876, - 31.876, - 21.493, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.947, - 5.963, - 21.65, - 31.876, - 31.876, - 31.876, - 31.876, - 21.309, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.898, - 5.871, - 21.401, - 31.876, - 31.876, - 31.876, - 31.876, - 21.7, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.901, - 5.817, - 21.614, - 31.876, - 31.876, - 31.876, - 31.876, - 21.537, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.939, - 5.975, - 21.184, - 31.876, - 31.876, - 31.876, - 31.876, - 21.772, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.03, - 5.86, - 20.277, - 31.876, - 31.876, - 31.876, - 31.876, - 22.701, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.099, - 3.982, - 4.433, - 4.095, - 31.876, - 31.876, - 31.876, - 3.831, - 12.208, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.95, - 5.872, - 19.965, - 31.876, - 31.876, - 31.876, - 31.876, - 23.082, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.823, - 5.623, - 20.71, - 31.876, - 31.876, - 31.876, - 31.876, - 22.713, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.814, - 5.656, - 20.774, - 31.876, - 31.876, - 31.876, - 31.876, - 22.625, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.852, - 5.707, - 20.364, - 31.876, - 31.876, - 31.876, - 31.876, - 22.946, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.858, - 5.868, - 20.613, - 31.876, - 31.876, - 31.876, - 31.876, - 22.53, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.76, - 5.776, - 20.715, - 31.876, - 31.876, - 31.876, - 31.876, - 22.618, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.752, - 5.849, - 20.691, - 31.876, - 31.876, - 31.876, - 31.876, - 3.201, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.699, - 5.884, - 20.407, - 31.876, - 31.876, - 31.876, - 31.876, - 22.879, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.332, - 0.518, - 27.961, - 31.876, - 31.876, - 31.876, - 31.876, - 18.058, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.656, - 5.995, - 20.468, - 31.876, - 31.876, - 31.876, - 31.876, - 22.75, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.555, - 5.773, - 21.078, - 31.876, - 31.876, - 31.876, - 31.876, - 22.464, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.535, - 6.079, - 20.762, - 31.876, - 31.876, - 31.876, - 31.876, - 22.494, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.515, - 6.611, - 20.805, - 31.876, - 31.876, - 31.876, - 31.876, - 21.938, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.541, - 6.247, - 22.568, - 31.876, - 31.876, - 31.876, - 31.876, - 5.056, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.381, - 6.005, - 22.41, - 31.876, - 31.876, - 31.876, - 31.876, - 21.073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.378, - 6.08, - 22.606, - 31.876, - 31.876, - 31.876, - 31.876, - 20.805, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.337, - 6.012, - 22.441, - 31.876, - 31.876, - 31.876, - 31.876, - 21.079, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.297, - 6.002, - 22.325, - 31.876, - 31.876, - 31.876, - 31.876, - 21.245, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.341, - 6.054, - 22.246, - 31.876, - 31.876, - 31.876, - 31.876, - 21.228, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.299, - 5.873, - 21.504, - 31.876, - 31.876, - 31.876, - 31.876, - 22.193, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.294, - 5.831, - 21.31, - 31.876, - 31.876, - 31.876, - 31.876, - 7.087, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.257, - 5.788, - 21.102, - 31.876, - 31.876, - 31.876, - 31.876, - 22.723, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.199, - 5.984, - 21.046, - 31.876, - 31.876, - 31.876, - 31.876, - 22.641, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.171, - 6.056, - 20.941, - 31.876, - 31.876, - 31.876, - 31.876, - 22.702, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.213, - 5.987, - 20.871, - 31.876, - 31.876, - 31.876, - 31.876, - 22.798, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.213, - 5.939, - 21.487, - 31.876, - 31.876, - 31.876, - 31.876, - 22.23, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.255, - 5.763, - 22.394, - 31.876, - 31.876, - 31.876, - 31.876, - 21.457, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.181, - 6.268, - 22.978, - 31.876, - 31.876, - 31.876, - 31.876, - 9.003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.137, - 6.164, - 22.411, - 31.876, - 31.876, - 31.876, - 31.876, - 21.157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.1, - 6.071, - 22.357, - 31.876, - 31.876, - 31.876, - 31.876, - 21.341, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.107, - 6.36, - 23.135, - 31.876, - 31.876, - 31.876, - 31.876, - 20.267, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067, - 6.321, - 22.723, - 31.876, - 31.876, - 31.876, - 31.876, - 20.758, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022, - 6.028, - 21.212, - 31.876, - 31.876, - 31.876, - 31.876, - 22.607, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.035, - 20.671, - 31.814, - 31.876, - 31.876, - 31.876, - 23.226, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.952, - 21.263, - 31.876, - 31.876, - 31.876, - 31.876, - 15.028, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.993, - 21.914, - 31.876, - 31.876, - 31.876, - 31.876, - 21.962, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.041, - 21.757, - 31.876, - 31.876, - 31.876, - 31.876, - 22.071, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.692, - 21.432, - 31.876, - 31.876, - 31.876, - 31.876, - 25.745, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.98, - 20.555, - 31.876, - 31.876, - 31.876, - 31.876, - 23.333, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.473, - 22.975, - 31.876, - 31.876, - 31.876, - 31.876, - 20.421, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.518, - 23.237, - 31.876, - 31.876, - 31.876, - 31.876, - 13.137, - 1.361, - 1.053, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.336, - 22.544, - 31.876, - 31.876, - 31.876, - 31.876, - 20.99, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.369, - 22.729, - 31.876, - 31.876, - 31.876, - 31.876, - 16.958, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.275, - 22.14, - 31.876, - 31.876, - 31.876, - 31.876, - 21.453, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.309, - 22.121, - 31.876, - 31.876, - 31.876, - 31.876, - 21.439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.405, - 22.431, - 31.876, - 31.876, - 31.876, - 31.876, - 21.032, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.856, - 24.35, - 31.876, - 31.876, - 31.876, - 31.876, - 18.663, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.023, - 24.748, - 31.876, - 31.876, - 31.876, - 31.876, - 18.099, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.871, - 23.893, - 31.876, - 31.876, - 31.876, - 31.876, - 19.105, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.77, - 24.113, - 31.876, - 31.876, - 31.876, - 31.876, - 18.986, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.558, - 23.506, - 31.876, - 31.876, - 31.876, - 31.876, - 19.805, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.338, - 22.971, - 31.876, - 31.876, - 31.876, - 31.876, - 20.56, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.947, - 20.988, - 31.876, - 31.876, - 31.876, - 31.876, - 22.934, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.144, - 25.521, - 31.876, - 31.876, - 31.876, - 31.876, - 17.204, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.619, - 26.948, - 31.876, - 31.876, - 31.876, - 31.876, - 15.302, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.555, - 26.529, - 31.876, - 31.876, - 31.876, - 31.876, - 15.785, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.357, - 25.677, - 31.876, - 31.876, - 31.876, - 31.876, - 16.836, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.825, - 23.945, - 31.876, - 31.876, - 31.876, - 31.876, - 19.1, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.401, - 26.138, - 31.876, - 31.876, - 31.876, - 31.876, - 16.33, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.235, - 25.155, - 31.876, - 31.876, - 31.876, - 31.876, - 17.479, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.246, - 22.512, - 31.876, - 31.876, - 31.876, - 31.876, - 21.11, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.55, - 26.843, - 31.876, - 31.876, - 31.876, - 31.876, - 15.477, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.514, - 26.469, - 31.876, - 31.876, - 31.876, - 31.876, - 15.886, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.346, - 26.295, - 31.876, - 31.876, - 31.876, - 31.876, - 16.228, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.829, - 24.531, - 31.876, - 31.876, - 31.876, - 31.876, - 18.509, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.389, - 25.824, - 31.876, - 31.876, - 31.876, - 31.876, - 16.657, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.401, - 22.222, - 31.876, - 31.876, - 31.876, - 31.876, - 22.246, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.541, - 24.072, - 31.876, - 31.876, - 31.876, - 31.876, - 19.256, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.62, - 24.403, - 31.876, - 31.876, - 31.876, - 31.876, - 18.846, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.821, - 24.395, - 31.876, - 31.876, - 31.876, - 31.876, - 18.653, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.05, - 21.433, - 31.876, - 31.876, - 31.876, - 31.876, - 25.386, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.6, - 24.589, - 31.876, - 31.876, - 31.876, - 31.876, - 18.68, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.173, - 24.948, - 31.876, - 31.876, - 31.876, - 31.876, - 18.748, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.444, - 3.621, - 16.532, - 31.876, - 26.745, - 31.876, - 31.876, - 10.141, - 15.479, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.207, - 27.584, - 31.876, - 31.876, - 31.876, - 31.876, - 6.826, - 8.252, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.273, - 27.146, - 31.876, - 31.876, - 31.876, - 31.876, - 15.45, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.92, - 26.362, - 31.876, - 31.876, - 31.876, - 31.876, - 16.587, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.9, - 26.471, - 31.876, - 31.876, - 31.876, - 31.876, - 16.498, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.528, - 25.611, - 31.876, - 31.876, - 31.876, - 31.876, - 17.731, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.405, - 25.59, - 31.876, - 31.876, - 31.876, - 31.876, - 17.875, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.586, - 26.121, - 31.876, - 31.876, - 31.876, - 31.876, - 17.162, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.505, - 26.008, - 31.876, - 31.876, - 31.876, - 31.876, - 17.357, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.348, - 25.13, - 31.876, - 31.876, - 31.876, - 31.876, - 18.391, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.446, - 22.009, - 31.876, - 31.876, - 31.876, - 31.876, - 22.414, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.776, - 24.677, - 31.876, - 31.876, - 31.876, - 31.876, - 19.416, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.86, - 25.752, - 31.876, - 31.876, - 31.876, - 31.876, - 18.258, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.928, - 26.126, - 31.876, - 31.876, - 31.876, - 31.876, - 17.815, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.302, - 25.638, - 31.876, - 31.876, - 31.876, - 31.876, - 18.93, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.702, - 25.126, - 31.876, - 31.876, - 31.876, - 31.876, - 20.041, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.308, - 24.871, - 31.876, - 31.876, - 31.876, - 31.876, - 20.69, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 4.037, - 25.202, - 31.876, - 31.876, - 31.876, - 31.876, - 20.629, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.894, - 25.228, - 31.876, - 31.876, - 31.876, - 31.876, - 20.748, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.891, - 22.647, - 31.876, - 31.876, - 31.876, - 31.876, - 24.331, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.649, - 22.347, - 31.876, - 31.876, - 31.876, - 31.876, - 24.873, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.595, - 23.098, - 31.876, - 31.876, - 31.876, - 31.876, - 24.176, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.137, - 26.602, - 31.876, - 31.876, - 31.876, - 31.876, - 20.13, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.921, - 26.425, - 31.876, - 31.876, - 31.876, - 31.876, - 20.523, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.563, - 25.599, - 31.876, - 31.876, - 31.876, - 31.876, - 21.707, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.37, - 25.363, - 31.876, - 31.876, - 31.876, - 31.876, - 22.137, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.221, - 24.891, - 31.876, - 31.876, - 31.876, - 31.876, - 22.756, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.887, - 24.365, - 31.876, - 31.876, - 31.876, - 31.876, - 23.617, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.08, - 23.317, - 31.876, - 31.876, - 31.876, - 31.876, - 25.472, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.421, - 26.249, - 31.876, - 31.876, - 31.876, - 31.876, - 22.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.177, - 25.33, - 31.876, - 31.876, - 31.876, - 31.876, - 23.362, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.843, - 23.879, - 31.876, - 31.876, - 31.876, - 31.876, - 25.147, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.677, - 23.366, - 31.876, - 31.876, - 31.876, - 31.876, - 25.826, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.622, - 23.439, - 31.876, - 31.876, - 31.876, - 31.876, - 25.808, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.24, - 22.932, - 31.876, - 31.876, - 31.876, - 31.876, - 26.697, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.33, - 22.336, - 31.876, - 31.876, - 31.876, - 31.876, - 27.203, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 22.931, - 31.876, - 31.876, - 31.876, - 31.876, - 26.938, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 17.899, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 0.094, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 18.102, - 21.929, - 31.876, - 31.876, - 31.876, - 31.876, - 9.838, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.838, - 22.472, - 31.876, - 31.876, - 31.876, - 31.876, - 19.559, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.588, - 31.876, - 30.315, - 31.876, - 31.876, - 31.876, - 17.966, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 19.789, - 31.876, - 31.876, - 31.876, - 31.876, - 30.08, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 23.431, - 31.876, - 31.876, - 31.876, - 31.876, - 26.438, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 22.056, - 31.876, - 31.876, - 31.876, - 31.876, - 27.813, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.745, - 24.869, - 31.876, - 31.876, - 31.876, - 27.948, - 19.744, - 1.439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 19.208, - 17.805, - 31.876, - 31.876, - 31.876, - 13.095, - 31.637, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 20.198, - 31.876, - 31.876, - 31.876, - 31.876, - 29.671, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 19.415, - 31.876, - 31.876, - 31.876, - 31.876, - 30.454, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.339, - 24.146, - 31.876, - 31.876, - 31.876, - 31.876, - 19.383, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 19.857, - 31.876, - 31.876, - 31.876, - 31.876, - 30.012, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.402, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.591, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.397, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 11.596, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.048, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 10.944, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.16, - 20.946, - 31.876, - 31.876, - 31.876, - 31.876, - 23.763, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 5.253, - 22.21, - 31.876, - 31.876, - 31.876, - 31.876, - 22.407, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 16.053, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 1.94, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.979, - 11.424, - 17.071, - 0.776, - 4.615, - 1.697, - 2.141, - 6.267, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 14.09, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 3.902, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.96, - 6.413, - 5.631, - 9.193, - 31.656, - 30.277, - 31.876, - 29.202, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 13.526, - 0.29, - 31.876, - 27.618, - 31.876, - 31.876, - 16.369, - 0.332, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 14.064, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 3.929, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 14.028, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 3.965, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 13.197, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 4.796, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 13.26, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 4.733, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.884, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 5.109, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 12.11, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 5.882, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.255, - 31.876, - 31.876, - 29.739, - 31.876, - 1.816, - 15.591, - 5.215, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.84, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 6.153, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 11.829, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 6.164, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 10.827, - 16.443, - 31.876, - 31.876, - 31.876, - 31.876, - 22.599, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.456, - 18.183, - 31.876, - 31.876, - 31.876, - 31.876, - 5.219, - 17.011, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 10.511, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 7.482, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 10.839, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 7.154, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 7.502, - 5.092, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 5.4, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.959, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 8.034, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.435, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 8.558, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.006, - 15.722, - 24.133, - 31.876, - 31.876, - 31.876, - 31.876, - 7.008, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.368, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.625, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.541, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.451, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.246, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.747, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 9.088, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 8.905, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.878, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.115, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 8.098, - 31.876, - 31.876, - 31.876, - 31.876, - 31.876, - 9.895, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.302, - 8.694, - 11.926, - 25.307, - 31.876, - 31.876, - 31.369, - 16.333, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.511, - 20.929, - 31.876, - 25.548, - 10.876, - 10.004, - 2.77, - 6.76, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.121, - 0.44, - 11.828, - 5.469, - 8.316, - 3.164, - 7.318, - 30.83, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.351, - 2.691, - 17.047, - 3.41, - 10.469, - 10.636, - 8.969, - 6.265, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 6.485, - 30.981, - 31.876, - 31.876, - 31.876, - 31.876, - 12.403, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "electric_curtailed_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "lifecycle_om_cost_after_tax": 12772.0, - "lcoe_per_kwh": 0.0283 - }, - { - "electric_to_grid_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "production_factor_series": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013705, - 0.074601, - 0.23405199999999998, - 0.37140100000000004, - 0.457396, - 0.486137, - 0.465086, - 0.387321, - 0.251484, - 0.054393000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013573, - 0.07456399999999999, - 0.236565, - 0.375486, - 0.46325099999999997, - 0.492928, - 0.469034, - 0.392412, - 0.256565, - 0.008654, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013533, - 0.078678, - 0.239314, - 0.38372, - 0.477065, - 0.508258, - 0.48821, - 0.409203, - 0.269851, - 0.060499000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009775, - 0.07675799999999999, - 0.242274, - 0.38363099999999994, - 0.471344, - 0.50049, - 0.479285, - 0.401763, - 0.26569600000000004, - 0.059933999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013391, - 0.07506600000000001, - 0.235656, - 0.372508, - 0.458604, - 0.48693000000000003, - 0.385089, - 0.276004, - 0.26081, - 0.032286999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012159000000000001, - 0.07479999999999999, - 0.232794, - 0.284947, - 0.32049, - 0.386586, - 0.462574, - 0.390855, - 0.261658, - 0.063405, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008794, - 0.07251099999999999, - 0.22912000000000002, - 0.364094, - 0.45033100000000004, - 0.480558, - 0.46354199999999995, - 0.390471, - 0.25952499999999995, - 0.065712, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008881, - 0.075806, - 0.240455, - 0.38718400000000003, - 0.481885, - 0.5135449999999999, - 0.494168, - 0.420124, - 0.281206, - 0.07649299999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013537, - 0.07942199999999999, - 0.236983, - 0.376257, - 0.466315, - 0.496591, - 0.478922, - 0.406902, - 0.275928, - 0.080101, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012332000000000001, - 0.07343300000000001, - 0.235072, - 0.325494, - 0.359965, - 0.426243, - 0.332669, - 0.30863999999999997, - 0.180172, - 0.030708, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005305, - 0.030978000000000002, - 0.13494, - 0.35726600000000003, - 0.446854, - 0.392215, - 0.374983, - 0.396432, - 0.244477, - 0.081755, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011404, - 0.07647, - 0.23719900000000002, - 0.37629199999999996, - 0.46577199999999996, - 0.49602300000000005, - 0.476009, - 0.405753, - 0.277358, - 0.089238, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010485, - 0.07609300000000001, - 0.235599, - 0.370807, - 0.458562, - 0.49013, - 0.47476, - 0.407654, - 0.27910199999999996, - 0.08927, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009601, - 0.076492, - 0.241664, - 0.38276299999999996, - 0.402656, - 0.384635, - 0.361574, - 0.354605, - 0.230766, - 0.100913, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01377, - 0.07631, - 0.227736, - 0.298361, - 0.380073, - 0.279534, - 0.466037, - 0.19444999999999998, - 0.030479, - 0.020027, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010573, - 0.07908, - 0.23432, - 0.375329, - 0.465676, - 0.499102, - 0.484575, - 0.41645, - 0.286861, - 0.100812, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009927, - 0.076675, - 0.23230099999999998, - 0.366776, - 0.454639, - 0.40252899999999997, - 0.47434899999999997, - 0.410881, - 0.284295, - 0.103963, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013154, - 0.080736, - 0.18712, - 0.320651, - 0.390661, - 0.40553500000000003, - 0.303653, - 0.27660500000000005, - 0.13714500000000002, - 0.021137, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014542999999999999, - 0.045953, - 0.146256, - 0.231821, - 0.23963800000000002, - 0.495433, - 0.482431, - 0.268529, - 0.20706200000000002, - 0.02103, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012747, - 0.08354900000000001, - 0.243511, - 0.385189, - 0.476558, - 0.260231, - 0.063109, - 0.089108, - 0.009399, - 0.013535, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017022, - 0.087987, - 0.215061, - 0.331837, - 0.39191000000000004, - 0.423086, - 0.35239299999999996, - 0.279007, - 0.249886, - 0.122694, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011367, - 0.084816, - 0.248946, - 0.386762, - 0.477277, - 0.5121330000000001, - 0.49658199999999997, - 0.432683, - 0.30964600000000003, - 0.123934, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011921, - 0.084701, - 0.244281, - 0.305247, - 0.39495800000000003, - 0.385259, - 0.369033, - 0.339217, - 0.217526, - 0.045221, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01809, - 0.08809399999999999, - 0.144143, - 0.218017, - 0.232237, - 0.24940199999999998, - 0.215239, - 0.087488, - 0.046853, - 0.018527000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.056672, - 0.134802, - 0.10626000000000001, - 0.171888, - 0.005713, - 0.523328, - 0.456557, - 0.32531, - 0.133659, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019056999999999998, - 0.096346, - 0.226511, - 0.027392, - 0.396443, - 0.412994, - 0.355983, - 0.013779999999999999, - 0.31063799999999997, - 0.11559699999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01713, - 0.10588299999999999, - 0.283263, - 0.43764299999999995, - 0.532924, - 0.5685009999999999, - 0.5544969999999999, - 0.48929, - 0.356134, - 0.157536, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012151, - 0.100106, - 0.280845, - 0.431555, - 0.524557, - 0.5613049999999999, - 0.546412, - 0.479143, - 0.351254, - 0.159108, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012673, - 0.09971899999999999, - 0.277466, - 0.421192, - 0.506313, - 0.537791, - 0.416192, - 0.39581700000000003, - 0.213088, - 0.063516, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022108, - 0.101745, - 0.271923, - 0.355839, - 0.4254, - 0.44798899999999997, - 0.421296, - 0.36825, - 0.263784, - 0.08663, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026926, - 0.186128, - 0.300543, - 0.525918, - 0.56604, - 0.5532809999999999, - 0.487022, - 0.360196, - 0.142864, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024475, - 0.114455, - 0.274424, - 0.41093999999999997, - 0.494405, - 0.5325460000000001, - 0.523793, - 0.467125, - 0.347474, - 0.15481999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017414000000000002, - 0.112286, - 0.295159, - 0.37849900000000003, - 0.444183, - 0.449854, - 0.549088, - 0.483067, - 0.364516, - 0.18149700000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014676, - 0.11349, - 0.29292, - 0.43879700000000005, - 0.525518, - 0.559625, - 0.544308, - 0.483025, - 0.366017, - 0.185304, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015785, - 0.110384, - 0.287053, - 0.431519, - 0.516851, - 0.551964, - 0.536854, - 0.475623, - 0.36002300000000004, - 0.180975, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027322, - 0.106686, - 0.221879, - 0.358874, - 0.42677800000000005, - 0.424599, - 0.379608, - 0.36484, - 0.232396, - 0.079893, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016762, - 0.115665, - 0.286563, - 0.427659, - 0.514, - 0.5529729999999999, - 0.46337, - 0.39853500000000003, - 0.30186799999999997, - 0.126631, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028050000000000002, - 0.113648, - 0.247106, - 0.35960000000000003, - 0.456798, - 0.407777, - 0.392478, - 0.31872500000000004, - 0.282674, - 0.117203, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02841, - 0.110138, - 0.22812000000000002, - 0.28460199999999997, - 0.264993, - 0.408599, - 0.433709, - 0.285274, - 0.242469, - 0.078884, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021643, - 0.11706, - 0.248244, - 0.324428, - 0.416823, - 0.161232, - 0.17858600000000002, - 0.10529999999999999, - 0.08764799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023904, - 0.112054, - 0.088348, - 0.182963, - 0.388519, - 0.38054000000000004, - 0.421734, - 0.366959, - 0.292127, - 0.053427999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.131173, - 0.307336, - 0.45533100000000004, - 0.543847, - 0.583844, - 0.5706789999999999, - 0.510041, - 0.38923599999999997, - 0.2002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.029782, - 0.141276, - 0.24609899999999998, - 0.453032, - 0.540029, - 0.5783680000000001, - 0.571065, - 0.50799, - 0.387659, - 0.015945, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021381, - 0.142064, - 0.321149, - 0.26601600000000003, - 0.555209, - 0.595163, - 0.585591, - 0.5239539999999999, - 0.321892, - 0.211772, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020442000000000002, - 0.146122, - 0.33269299999999996, - 0.483154, - 0.5729, - 0.610606, - 0.598505, - 0.533627, - 0.415801, - 0.22752799999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036664, - 0.146971, - 0.330699, - 0.470693, - 0.553535, - 0.58847, - 0.572798, - 0.510336, - 0.3969, - 0.22013999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01758, - 0.144891, - 0.32424200000000003, - 0.46518400000000004, - 0.549768, - 0.588151, - 0.5769690000000001, - 0.5154310000000001, - 0.402216, - 0.21935, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020210000000000002, - 0.149911, - 0.32907600000000004, - 0.473384, - 0.556753, - 0.591016, - 0.577866, - 0.51336, - 0.33593900000000004, - 0.054595, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040764, - 0.140206, - 0.244561, - 0.33951299999999995, - 0.321813, - 0.223732, - 0.398168, - 0.398206, - 0.311401, - 0.155414, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030052, - 0.023899999999999998, - 0.031553, - 0.10640300000000001, - 0.47886399999999996, - 0.419814, - 0.5250929999999999, - 0.412961, - 0.23096799999999998, - 0.009188, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024891, - 0.164969, - 0.34276999999999996, - 0.481731, - 0.564739, - 0.6018089999999999, - 0.59189, - 0.53458, - 0.419827, - 0.242513, - 0.013927, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031445, - 0.167547, - 0.338192, - 0.470704, - 0.5563440000000001, - 0.597555, - 0.5920599999999999, - 0.53664, - 0.425818, - 0.247935, - 0.017277999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036224, - 0.11881399999999999, - 0.13659100000000002, - 0.09934399999999999, - 0.407882, - 0.489748, - 0.466408, - 0.377869, - 0.301842, - 0.154448, - 0.002519, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027815000000000003, - 0.18684399999999998, - 0.385973, - 0.535389, - 0.628553, - 0.671049, - 0.662512, - 0.598773, - 0.47758100000000003, - 0.282374, - 0.008874, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027782, - 0.185994, - 0.377728, - 0.516644, - 0.591759, - 0.6174729999999999, - 0.596564, - 0.541605, - 0.442256, - 0.269912, - 0.00926, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030081, - 0.185721, - 0.373844, - 0.516821, - 0.60485, - 0.643239, - 0.493906, - 0.118715, - 0.03814, - 0.061643, - 0.022768999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03462, - 0.190088, - 0.373139, - 0.510812, - 0.5971770000000001, - 0.635759, - 0.6247659999999999, - 0.5657279999999999, - 0.45271300000000003, - 0.269868, - 0.032112, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005118, - 0.201511, - 0.39752, - 0.451288, - 0.500564, - 0.67562, - 0.664748, - 0.599675, - 0.048753, - 0.05861, - 0.003065, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036647, - 0.208921, - 0.407147, - 0.550822, - 0.641482, - 0.681517, - 0.67192, - 0.6086900000000001, - 0.48942899999999995, - 0.008179, - 0.021701, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030795000000000003, - 0.17751499999999998, - 0.210011, - 0.29329500000000003, - 0.41720100000000004, - 0.08020999999999999, - 0.43029199999999995, - 0.287803, - 0.093394, - 0.132103, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.058982999999999994, - 0.17430500000000002, - 0.271551, - 0.361361, - 0.461389, - 0.420334, - 0.405386, - 0.29732600000000003, - 0.211302, - 0.097293, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0012909999999999998, - 0.06401000000000001, - 0.177357, - 0.314271, - 0.45323399999999997, - 0.500051, - 0.500418, - 0.5792039999999999, - 0.45652, - 0.288115, - 0.12956800000000002, - 0.005171, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006144, - 0.04692, - 0.21480000000000002, - 0.31833999999999996, - 0.440479, - 0.499875, - 0.540289, - 0.440021, - 0.39847699999999997, - 0.44712999999999997, - 0.27590800000000004, - 0.043274, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007905, - 0.04972699999999999, - 0.218552, - 0.390521, - 0.512571, - 0.428192, - 0.627538, - 0.619112, - 0.467811, - 0.447787, - 0.13911500000000002, - 0.044365, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003424, - 0.068493, - 0.18090299999999998, - 0.280329, - 0.515528, - 0.59664, - 0.519968, - 0.627435, - 0.564834, - 0.449529, - 0.279714, - 0.048554, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004816, - 0.057529000000000004, - 0.237245, - 0.420692, - 0.468113, - 0.526609, - 0.5061840000000001, - 0.5114569999999999, - 0.499562, - 0.37706799999999996, - 0.302211, - 0.009085000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004727, - 0.058847000000000003, - 0.248744, - 0.439004, - 0.568432, - 0.646255, - 0.675528, - 0.6595599999999999, - 0.5979009999999999, - 0.483367, - 0.241844, - 0.03968, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00552, - 0.066119, - 0.239791, - 0.424769, - 0.54723, - 0.616808, - 0.632577, - 0.604118, - 0.553928, - 0.358224, - 0.228617, - 0.059457, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005409, - 0.063765, - 0.213755, - 0.42602100000000004, - 0.55041, - 0.628226, - 0.658216, - 0.646381, - 0.5819500000000001, - 0.46966699999999995, - 0.299414, - 0.067026, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007859, - 0.079239, - 0.21631999999999998, - 0.445666, - 0.485724, - 0.5086229999999999, - 0.573986, - 0.504964, - 0.461325, - 0.319447, - 0.221297, - 0.043676, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008431, - 0.072574, - 0.261272, - 0.448379, - 0.575021, - 0.653971, - 0.684628, - 0.665005, - 0.599789, - 0.48476400000000003, - 0.310596, - 0.07661499999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010326, - 0.07823000000000001, - 0.264386, - 0.443178, - 0.569605, - 0.648397, - 0.6833490000000001, - 0.668256, - 0.602636, - 0.48953199999999997, - 0.31743299999999997, - 0.086202, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011273, - 0.08039400000000001, - 0.26965100000000003, - 0.445969, - 0.5579400000000001, - 0.63063, - 0.660633, - 0.650582, - 0.594221, - 0.48505200000000004, - 0.31735800000000003, - 0.08887300000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011035999999999999, - 0.082455, - 0.27595, - 0.45840499999999995, - 0.583032, - 0.659686, - 0.686682, - 0.67106, - 0.601915, - 0.48645900000000003, - 0.317927, - 0.08652800000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015470000000000001, - 0.09219100000000001, - 0.270867, - 0.43257100000000004, - 0.5452859999999999, - 0.608746, - 0.649475, - 0.644536, - 0.591488, - 0.488066, - 0.326347, - 0.09752899999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011873, - 0.090024, - 0.290086, - 0.471598, - 0.596995, - 0.6781029999999999, - 0.71105, - 0.695723, - 0.6337670000000001, - 0.462445, - 0.238613, - 0.069048, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014958, - 0.098858, - 0.299639, - 0.485832, - 0.608818, - 0.6839500000000001, - 0.708388, - 0.6860510000000001, - 0.624244, - 0.5110520000000001, - 0.34604599999999996, - 0.11131100000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013971, - 0.100914, - 0.302022, - 0.48463, - 0.606822, - 0.6812659999999999, - 0.70505, - 0.678236, - 0.608816, - 0.497981, - 0.337901, - 0.108758, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021276, - 0.101338, - 0.22406600000000002, - 0.43307799999999996, - 0.522553, - 0.537649, - 0.554702, - 0.546269, - 0.43381400000000003, - 0.48973, - 0.330413, - 0.101726, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016652, - 0.10463599999999999, - 0.292031, - 0.4582, - 0.575189, - 0.65073, - 0.682355, - 0.670298, - 0.606008, - 0.49156099999999997, - 0.322812, - 0.091889, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023920999999999998, - 0.117723, - 0.29496100000000003, - 0.452698, - 0.551821, - 0.616154, - 0.6573289999999999, - 0.657257, - 0.6048150000000001, - 0.495918, - 0.330778, - 0.101657, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021835999999999998, - 0.11727599999999999, - 0.254362, - 0.37263799999999997, - 0.5479310000000001, - 0.552898, - 0.56326, - 0.528413, - 0.512426, - 0.478205, - 0.227071, - 0.061214, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023441, - 0.12050799999999999, - 0.257543, - 0.419228, - 0.581638, - 0.6491480000000001, - 0.668874, - 0.6473289999999999, - 0.43333, - 0.42192799999999997, - 0.239646, - 0.092279, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024099, - 0.12409999999999999, - 0.3028, - 0.46264, - 0.5890639999999999, - 0.666541, - 0.698956, - 0.603546, - 0.6131570000000001, - 0.50345, - 0.331671, - 0.10102599999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023521, - 0.127137, - 0.324583, - 0.49947699999999995, - 0.623681, - 0.70382, - 0.186839, - 0.452007, - 0.468528, - 0.31955900000000004, - 0.125834, - 0.106979, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026497, - 0.13375, - 0.329346, - 0.49527499999999997, - 0.6074729999999999, - 0.6777369999999999, - 0.712835, - 0.698765, - 0.6346499999999999, - 0.5178440000000001, - 0.135437, - 0.115047, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02894, - 0.141098, - 0.32215699999999997, - 0.47425599999999996, - 0.578619, - 0.571686, - 0.5936889999999999, - 0.566261, - 0.5467190000000001, - 0.481211, - 0.32098000000000004, - 0.109796, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026094000000000003, - 0.122821, - 0.263529, - 0.468343, - 0.59213, - 0.642232, - 0.535741, - 0.5812, - 0.613512, - 0.465146, - 0.213027, - 0.052987, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021868, - 0.14995599999999998, - 0.359341, - 0.530941, - 0.651419, - 0.727577, - 0.7543730000000001, - 0.7325320000000001, - 0.666609, - 0.5489160000000001, - 0.38001100000000004, - 0.14592, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023764, - 0.146091, - 0.34283800000000003, - 0.509468, - 0.629578, - 0.7069160000000001, - 0.738341, - 0.728011, - 0.663846, - 0.544945, - 0.004889999999999999, - 0.0024980000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026183, - 0.158608, - 0.37000900000000003, - 0.545673, - 0.66818, - 0.746845, - 0.773058, - 0.753529, - 0.681693, - 0.562936, - 0.387887, - 0.14645, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023395, - 0.15865600000000002, - 0.362851, - 0.526616, - 0.639023, - 0.704991, - 0.723879, - 0.5900259999999999, - 0.641455, - 0.530254, - 0.371567, - 0.14645599999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031061, - 0.157817, - 0.30185, - 0.411775, - 0.5752079999999999, - 0.6467350000000001, - 0.6852910000000001, - 0.6791739999999999, - 0.6259009999999999, - 0.516709, - 0.360927, - 0.135713, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03795900000000001, - 0.171422, - 0.275393, - 0.44304000000000004, - 0.623169, - 0.698834, - 0.731831, - 0.717963, - 0.655362, - 0.544092, - 0.37787200000000004, - 0.144077, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03893, - 0.179918, - 0.382533, - 0.548155, - 0.666135, - 0.740149, - 0.770752, - 0.752019, - 0.682809, - 0.33640800000000004, - 0.37593099999999996, - 0.141541, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.042182000000000004, - 0.189371, - 0.38854500000000003, - 0.5540259999999999, - 0.673661, - 0.744909, - 0.768317, - 0.744909, - 0.6738869999999999, - 0.5540499999999999, - 0.379478, - 0.148197, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038577, - 0.186808, - 0.386587, - 0.5429700000000001, - 0.6518440000000001, - 0.712015, - 0.727206, - 0.704521, - 0.644569, - 0.541359, - 0.381916, - 0.153401, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043635, - 0.183149, - 0.36744299999999996, - 0.519277, - 0.628707, - 0.700329, - 0.7275689999999999, - 0.7112229999999999, - 0.644624, - 0.527949, - 0.372869, - 0.148728, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04131, - 0.186078, - 0.37358800000000003, - 0.524791, - 0.6358010000000001, - 0.708996, - 0.7407720000000001, - 0.726808, - 0.6592279999999999, - 0.539402, - 0.34048399999999995, - 0.144034, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034881, - 0.191845, - 0.38702499999999995, - 0.5428339999999999, - 0.658025, - 0.7319070000000001, - 0.763968, - 0.744535, - 0.677806, - 0.5632229999999999, - 0.401339, - 0.169142, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00039600000000000003, - 0.192207, - 0.271424, - 0.552767, - 0.148936, - 0.415319, - 0.773792, - 0.753583, - 0.5803429999999999, - 0.376468, - 0.061812, - 0.0025710000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052466, - 0.203787, - 0.272549, - 0.553198, - 0.669085, - 0.739509, - 0.654273, - 0.738874, - 0.389772, - 0.199123, - 0.19241399999999997, - 0.038098999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00040100000000000004, - 0.203654, - 0.398297, - 0.16302, - 0.020974, - 0.067309, - 0.031985, - 0.122739, - 0.12185299999999999, - 0.233363, - 0.08086, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.060877, - 0.21315299999999998, - 0.422047, - 0.581409, - 0.691622, - 0.761206, - 0.782611, - 0.757746, - 0.6877759999999999, - 0.575613, - 0.410334, - 0.18223699999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0019850000000000002, - 0.048951999999999996, - 0.207012, - 0.397044, - 0.538385, - 0.6259779999999999, - 0.675476, - 0.708394, - 0.704326, - 0.6516219999999999, - 0.550508, - 0.392121, - 0.173291, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0024860000000000004, - 0.046847, - 0.20609, - 0.391963, - 0.533886, - 0.6323479999999999, - 0.6880510000000001, - 0.700456, - 0.687766, - 0.635308, - 0.534982, - 0.386715, - 0.172867, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002931, - 0.043119, - 0.206156, - 0.389009, - 0.519088, - 0.6072000000000001, - 0.665234, - 0.701789, - 0.699568, - 0.645134, - 0.542085, - 0.392262, - 0.182274, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005351, - 0.060467, - 0.20973599999999998, - 0.392175, - 0.458656, - 0.540868, - 0.694238, - 0.715603, - 0.702111, - 0.64374, - 0.541037, - 0.291219, - 0.179203, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00479, - 0.047118, - 0.213582, - 0.398843, - 0.535172, - 0.626042, - 0.676197, - 0.681242, - 0.64915, - 0.592055, - 0.500218, - 0.354741, - 0.16153499999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0037679999999999996, - 0.05458, - 0.210573, - 0.38662799999999997, - 0.523466, - 0.633501, - 0.685278, - 0.689722, - 0.653317, - 0.5832820000000001, - 0.50213, - 0.374054, - 0.180284, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003992, - 0.050055999999999996, - 0.21599000000000002, - 0.395171, - 0.524086, - 0.612742, - 0.661537, - 0.6793020000000001, - 0.666188, - 0.6166269999999999, - 0.52232, - 0.38533100000000003, - 0.185364, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003901, - 0.051758000000000005, - 0.215528, - 0.38708499999999996, - 0.523313, - 0.628884, - 0.692399, - 0.7189059999999999, - 0.704739, - 0.644846, - 0.5360069999999999, - 0.396106, - 0.18823099999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005193, - 0.062483, - 0.229603, - 0.413054, - 0.549671, - 0.651916, - 0.717237, - 0.7399779999999999, - 0.733392, - 0.671326, - 0.566057, - 0.418128, - 0.202738, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007494, - 0.07127800000000001, - 0.232315, - 0.399829, - 0.549961, - 0.567561, - 0.37122000000000005, - 0.438787, - 0.480336, - 0.180307, - 0.16791499999999998, - 0.108783, - 0.027759, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07452500000000001, - 0.198577, - 0.287292, - 0.34908, - 0.186477, - 0.45565100000000003, - 0.589216, - 0.544889, - 0.3357, - 0.399623, - 0.27202499999999996, - 0.200625, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007008, - 0.060759999999999995, - 0.23686600000000002, - 0.42401799999999995, - 0.56924, - 0.675736, - 0.743121, - 0.7683150000000001, - 0.384115, - 0.500422, - 0.216307, - 0.127622, - 0.021072, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008362999999999999, - 0.068333, - 0.24791, - 0.434361, - 0.574214, - 0.675961, - 0.73388, - 0.743891, - 0.7173959999999999, - 0.648884, - 0.5479400000000001, - 0.39755900000000005, - 0.19490000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009582, - 0.075207, - 0.245018, - 0.428952, - 0.566932, - 0.673443, - 0.722909, - 0.7235389999999999, - 0.688514, - 0.618173, - 0.5232100000000001, - 0.393945, - 0.199849, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010987, - 0.077632, - 0.247055, - 0.425339, - 0.555339, - 0.645597, - 0.6917300000000001, - 0.693322, - 0.670824, - 0.6175689999999999, - 0.5264, - 0.37917, - 0.180906, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011124, - 0.076916, - 0.24133500000000002, - 0.406096, - 0.5334260000000001, - 0.638155, - 0.702937, - 0.728707, - 0.713735, - 0.6507269999999999, - 0.542235, - 0.41551699999999997, - 0.21246, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010199999999999999, - 0.071923, - 0.250594, - 0.433479, - 0.564427, - 0.658019, - 0.7022160000000001, - 0.694528, - 0.664548, - 0.632403, - 0.544744, - 0.40227999999999997, - 0.20683500000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011541000000000001, - 0.075459, - 0.247842, - 0.421874, - 0.548938, - 0.637929, - 0.680757, - 0.680842, - 0.671099, - 0.631897, - 0.539858, - 0.395489, - 0.197857, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011327, - 0.075089, - 0.243618, - 0.41512299999999996, - 0.541903, - 0.633568, - 0.67945, - 0.6899740000000001, - 0.661938, - 0.6115130000000001, - 0.5177759999999999, - 0.381081, - 0.192801, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013127000000000002, - 0.079344, - 0.240184, - 0.397086, - 0.5170359999999999, - 0.615066, - 0.676865, - 0.7038329999999999, - 0.690875, - 0.637164, - 0.536697, - 0.394038, - 0.199292, - 0.0035800000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014047, - 0.08376, - 0.255289, - 0.410346, - 0.500488, - 0.607463, - 0.63166, - 0.751379, - 0.732155, - 0.5418390000000001, - 0.494436, - 0.35507799999999995, - 0.179551, - 0.006138, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019786, - 0.102306, - 0.237916, - 0.40626, - 0.570268, - 0.665319, - 0.731365, - 0.292868, - 0.352007, - 0.691772, - 0.58378, - 0.272906, - 0.20916300000000002, - 0.002751, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024143, - 0.10778, - 0.27499599999999996, - 0.260671, - 0.59166, - 0.69817, - 0.762856, - 0.7007749999999999, - 0.368781, - 0.082614, - 0.484321, - 0.285203, - 0.23549199999999998, - 0.010385, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016481000000000003, - 0.093929, - 0.27820999999999996, - 0.45742, - 0.44323700000000005, - 0.690562, - 0.7438619999999999, - 0.756904, - 0.521942, - 0.539702, - 0.5510729999999999, - 0.39960700000000005, - 0.201264, - 0.00276, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018973, - 0.096432, - 0.25876699999999997, - 0.42056299999999996, - 0.547327, - 0.643365, - 0.708109, - 0.733029, - 0.718683, - 0.6530750000000001, - 0.5467029999999999, - 0.389593, - 0.192363, - 0.003992, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025815, - 0.111303, - 0.27372199999999997, - 0.43757100000000004, - 0.567458, - 0.6736169999999999, - 0.738951, - 0.7623099999999999, - 0.7390119999999999, - 0.678806, - 0.569708, - 0.418007, - 0.216679, - 0.008805, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022265999999999998, - 0.103908, - 0.27071100000000003, - 0.43902300000000005, - 0.570332, - 0.672979, - 0.736139, - 0.7589020000000001, - 0.741832, - 0.682713, - 0.57955, - 0.432918, - 0.23413399999999998, - 0.013176, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018986999999999997, - 0.101205, - 0.276809, - 0.450677, - 0.5838139999999999, - 0.691758, - 0.755166, - 0.775891, - 0.7557809999999999, - 0.693239, - 0.5887939999999999, - 0.43738299999999997, - 0.23956200000000002, - 0.01927, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017577000000000002, - 0.105007, - 0.302017, - 0.48802, - 0.620165, - 0.712585, - 0.7693300000000001, - 0.7835420000000001, - 0.75666, - 0.698626, - 0.596723, - 0.448324, - 0.24732300000000002, - 0.020760999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022661, - 0.10790000000000001, - 0.290773, - 0.46540499999999996, - 0.598296, - 0.695956, - 0.7577229999999999, - 0.7807000000000001, - 0.761105, - 0.7009299999999999, - 0.59472, - 0.44329399999999997, - 0.240007, - 0.018438, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0287, - 0.117551, - 0.290358, - 0.466745, - 0.606452, - 0.708788, - 0.770829, - 0.703868, - 0.16819900000000002, - 0.522843, - 0.5927709999999999, - 0.430411, - 0.225615, - 0.016654, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026934999999999997, - 0.113488, - 0.283851, - 0.454931, - 0.5844790000000001, - 0.683399, - 0.746433, - 0.7690990000000001, - 0.756342, - 0.694108, - 0.46576799999999996, - 0.36274700000000004, - 0.19050399999999998, - 0.008753, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024439, - 0.110946, - 0.283688, - 0.460663, - 0.601607, - 0.7069, - 0.772223, - 0.797671, - 0.7741939999999999, - 0.713909, - 0.607242, - 0.456769, - 0.25583500000000003, - 0.026866, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018352, - 0.10641800000000001, - 0.289682, - 0.462703, - 0.583932, - 0.663233, - 0.708367, - 0.7208150000000001, - 0.7084750000000001, - 0.6531440000000001, - 0.55933, - 0.42529300000000003, - 0.24995799999999999, - 0.032115000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017977, - 0.107266, - 0.291983, - 0.46439600000000003, - 0.589369, - 0.678271, - 0.725429, - 0.7329220000000001, - 0.7026079999999999, - 0.632771, - 0.545216, - 0.42486599999999997, - 0.249414, - 0.0312, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018444, - 0.105907, - 0.283592, - 0.449849, - 0.573747, - 0.655654, - 0.6958179999999999, - 0.693932, - 0.6590130000000001, - 0.622479, - 0.5510929999999999, - 0.421918, - 0.241088, - 0.029032, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018143, - 0.104741, - 0.2742, - 0.430818, - 0.556437, - 0.6532380000000001, - 0.71568, - 0.7414740000000001, - 0.7272419999999999, - 0.6706019999999999, - 0.572936, - 0.432339, - 0.247908, - 0.033402, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016604, - 0.106171, - 0.28183600000000003, - 0.438428, - 0.553578, - 0.6378189999999999, - 0.684483, - 0.700995, - 0.682702, - 0.6355890000000001, - 0.5515019999999999, - 0.418341, - 0.240004, - 0.031952, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020035, - 0.106136, - 0.273043, - 0.429132, - 0.552528, - 0.650255, - 0.709544, - 0.7360789999999999, - 0.722247, - 0.667942, - 0.574136, - 0.439202, - 0.260093, - 0.041460000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017193999999999997, - 0.10890699999999999, - 0.23785900000000001, - 0.45643900000000004, - 0.5878490000000001, - 0.552057, - 0.7450739999999999, - 0.7629, - 0.744918, - 0.690023, - 0.5869, - 0.447963, - 0.261458, - 0.040402, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022498999999999998, - 0.115816, - 0.29797500000000005, - 0.46924400000000005, - 0.603955, - 0.703484, - 0.764891, - 0.786617, - 0.771122, - 0.711379, - 0.607611, - 0.464601, - 0.275726, - 0.04836, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028123000000000002, - 0.123501, - 0.29970800000000003, - 0.470598, - 0.6027279999999999, - 0.7076330000000001, - 0.76666, - 0.7877430000000001, - 0.767721, - 0.706054, - 0.604413, - 0.45808699999999997, - 0.264994, - 0.042752000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027248, - 0.12112300000000001, - 0.290312, - 0.44903899999999997, - 0.570484, - 0.6642250000000001, - 0.715553, - 0.7312240000000001, - 0.718703, - 0.66671, - 0.578017, - 0.444321, - 0.26372199999999996, - 0.048043999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021813, - 0.11536, - 0.286514, - 0.44385, - 0.564926, - 0.654557, - 0.702696, - 0.713756, - 0.697808, - 0.6476770000000001, - 0.558935, - 0.426491, - 0.24896000000000001, - 0.043184, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023876, - 0.117228, - 0.2809, - 0.435771, - 0.55838, - 0.654245, - 0.711702, - 0.732982, - 0.5685800000000001, - 0.661802, - 0.564053, - 0.377886, - 0.22984000000000002, - 0.043887999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030856, - 0.113405, - 0.286231, - 0.442067, - 0.56089, - 0.655251, - 0.715789, - 0.7361449999999999, - 0.721493, - 0.6684589999999999, - 0.57108, - 0.43758800000000003, - 0.255287, - 0.049633000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030506000000000002, - 0.11320999999999999, - 0.235033, - 0.263755, - 0.499905, - 0.5883079999999999, - 0.5220009999999999, - 0.376003, - 0.131547, - 0.45979899999999996, - 0.21551599999999999, - 0.437072, - 0.23768899999999998, - 0.038415, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026795000000000003, - 0.113307, - 0.276447, - 0.442728, - 0.557241, - 0.646495, - 0.712015, - 0.6742039999999999, - 0.522725, - 0.5689740000000001, - 0.5146499999999999, - 0.322584, - 0.173319, - 0.029735, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023443000000000002, - 0.107855, - 0.23125800000000002, - 0.226911, - 0.45463099999999995, - 0.5407029999999999, - 0.624268, - 0.633816, - 0.616127, - 0.321048, - 0.296631, - 0.23168799999999998, - 0.106489, - 0.040117, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025204, - 0.118897, - 0.27976999999999996, - 0.432092, - 0.5532549999999999, - 0.637605, - 0.671644, - 0.666211, - 0.643197, - 0.604291, - 0.5287580000000001, - 0.40252499999999997, - 0.247959, - 0.05579, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023254999999999998, - 0.11324899999999999, - 0.277941, - 0.429865, - 0.551655, - 0.64488, - 0.705271, - 0.73154, - 0.719127, - 0.665263, - 0.570797, - 0.44273700000000005, - 0.268404, - 0.067562, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021838, - 0.071717, - 0.177523, - 0.143792, - 0.17586000000000002, - 0.557357, - 0.49397199999999997, - 0.7419070000000001, - 0.738778, - 0.538323, - 0.5866910000000001, - 0.437742, - 0.252461, - 0.04081, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026221, - 0.11963700000000001, - 0.294253, - 0.461262, - 0.5949099999999999, - 0.693706, - 0.757426, - 0.781375, - 0.7660399999999999, - 0.7061799999999999, - 0.6063529999999999, - 0.46501, - 0.280331, - 0.070202, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022760000000000002, - 0.126524, - 0.316379, - 0.492243, - 0.631864, - 0.7338429999999999, - 0.797515, - 0.820432, - 0.7973, - 0.73687, - 0.6340779999999999, - 0.49812599999999996, - 0.312013, - 0.088574, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020328, - 0.12739, - 0.322504, - 0.501689, - 0.638345, - 0.737206, - 0.788099, - 0.765532, - 0.783501, - 0.722164, - 0.6211409999999999, - 0.484084, - 0.304117, - 0.08967900000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019729, - 0.122321, - 0.30370400000000003, - 0.4721, - 0.5920829999999999, - 0.6762910000000001, - 0.724828, - 0.732349, - 0.703933, - 0.6385839999999999, - 0.5527960000000001, - 0.442363, - 0.28272, - 0.080261, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021663, - 0.119475, - 0.29495, - 0.45687700000000003, - 0.576513, - 0.657643, - 0.701123, - 0.711989, - 0.6993400000000001, - 0.657166, - 0.5742, - 0.45184399999999997, - 0.283591, - 0.079872, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020527, - 0.115478, - 0.285558, - 0.44637099999999996, - 0.573044, - 0.671049, - 0.734321, - 0.761299, - 0.751305, - 0.697261, - 0.601767, - 0.47176, - 0.296206, - 0.08568, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020472999999999998, - 0.124572, - 0.296212, - 0.472877, - 0.582364, - 0.678596, - 0.764972, - 0.789022, - 0.771512, - 0.7151069999999999, - 0.61427, - 0.479417, - 0.299648, - 0.085967, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024687, - 0.12136, - 0.301965, - 0.468696, - 0.5971660000000001, - 0.694726, - 0.7556269999999999, - 0.7786369999999999, - 0.761349, - 0.702607, - 0.603241, - 0.471962, - 0.29457799999999995, - 0.08498900000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022407, - 0.12072799999999999, - 0.296974, - 0.456805, - 0.569076, - 0.642725, - 0.674236, - 0.6844210000000001, - 0.686556, - 0.655264, - 0.573735, - 0.453223, - 0.279491, - 0.077256, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023614, - 0.117695, - 0.28554, - 0.43492899999999995, - 0.55965, - 0.6539919999999999, - 0.7137, - 0.738636, - 0.725716, - 0.672999, - 0.57172, - 0.44798000000000004, - 0.259719, - 0.043851999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022133, - 0.115877, - 0.28944099999999995, - 0.454443, - 0.583087, - 0.680158, - 0.7414160000000001, - 0.766013, - 0.7514109999999999, - 0.695846, - 0.599429, - 0.47072, - 0.29483499999999996, - 0.085885, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025407, - 0.11935599999999999, - 0.291311, - 0.45235000000000003, - 0.5722079999999999, - 0.6537229999999999, - 0.696382, - 0.710543, - 0.7014130000000001, - 0.659865, - 0.5767680000000001, - 0.454972, - 0.28432799999999997, - 0.079844, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024519, - 0.117972, - 0.291056, - 0.45183999999999996, - 0.56763, - 0.642418, - 0.68577, - 0.7008920000000001, - 0.693901, - 0.654813, - 0.5705800000000001, - 0.45023, - 0.281963, - 0.081094, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.029788000000000002, - 0.121777, - 0.28363499999999997, - 0.435466, - 0.552704, - 0.641323, - 0.701265, - 0.726961, - 0.7151109999999999, - 0.657384, - 0.5726789999999999, - 0.45102, - 0.282087, - 0.082691, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024523, - 0.116976, - 0.28182, - 0.43735599999999997, - 0.555477, - 0.641386, - 0.69168, - 0.715237, - 0.7081109999999999, - 0.659534, - 0.572705, - 0.446113, - 0.281254, - 0.082826, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022940000000000002, - 0.11508700000000001, - 0.285766, - 0.44306599999999996, - 0.567154, - 0.6594840000000001, - 0.71947, - 0.743077, - 0.729413, - 0.676496, - 0.586216, - 0.458318, - 0.290292, - 0.08888, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02044, - 0.110866, - 0.281094, - 0.437761, - 0.556589, - 0.648581, - 0.7079310000000001, - 0.733694, - 0.722839, - 0.671808, - 0.582546, - 0.458365, - 0.292819, - 0.091329, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019577999999999998, - 0.110095, - 0.278515, - 0.43353800000000003, - 0.550698, - 0.62534, - 0.693852, - 0.725872, - 0.717067, - 0.6691090000000001, - 0.562429, - 0.43843099999999996, - 0.284891, - 0.075297, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022723, - 0.10645600000000001, - 0.249622, - 0.39348500000000003, - 0.54877, - 0.638486, - 0.6868150000000001, - 0.711221, - 0.6241680000000001, - 0.5955170000000001, - 0.49826600000000004, - 0.32910199999999995, - 0.253945, - 0.07558799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022997, - 0.108587, - 0.256053, - 0.40386900000000003, - 0.522837, - 0.655965, - 0.6938529999999999, - 0.700474, - 0.7195410000000001, - 0.687117, - 0.594563, - 0.470166, - 0.299768, - 0.092694, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022171, - 0.106766, - 0.26399900000000004, - 0.405601, - 0.5227480000000001, - 0.611095, - 0.668805, - 0.690987, - 0.677114, - 0.400401, - 0.252381, - 0.418798, - 0.265048, - 0.07791100000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021507000000000002, - 0.107459, - 0.266803, - 0.421036, - 0.540485, - 0.6332300000000001, - 0.6927089999999999, - 0.719789, - 0.708823, - 0.658941, - 0.5690879999999999, - 0.44608800000000004, - 0.281377, - 0.085132, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022733, - 0.112093, - 0.284578, - 0.449555, - 0.5823590000000001, - 0.684111, - 0.748093, - 0.772147, - 0.7571169999999999, - 0.701984, - 0.606506, - 0.47497, - 0.304211, - 0.097314, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024477, - 0.114376, - 0.291456, - 0.455034, - 0.570729, - 0.648205, - 0.70004, - 0.726244, - 0.722093, - 0.681428, - 0.595284, - 0.47201600000000005, - 0.301956, - 0.095821, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01893, - 0.106261, - 0.277709, - 0.433395, - 0.5460280000000001, - 0.637383, - 0.7014130000000001, - 0.73258, - 0.7260220000000001, - 0.679981, - 0.591039, - 0.474208, - 0.30998899999999996, - 0.10444400000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014618, - 0.104858, - 0.28674700000000003, - 0.45076499999999997, - 0.5696599999999999, - 0.64996, - 0.70726, - 0.733392, - 0.724572, - 0.681063, - 0.595767, - 0.473596, - 0.310603, - 0.102813, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014587999999999999, - 0.10501, - 0.287808, - 0.45514699999999997, - 0.579677, - 0.670501, - 0.7314919999999999, - 0.7567569999999999, - 0.746005, - 0.697448, - 0.6089450000000001, - 0.48315499999999995, - 0.316612, - 0.10758799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014326, - 0.104923, - 0.285225, - 0.446179, - 0.554953, - 0.630783, - 0.68143, - 0.704785, - 0.696697, - 0.655175, - 0.576638, - 0.45955399999999996, - 0.303581, - 0.10244299999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014199, - 0.10212900000000001, - 0.273415, - 0.42349200000000004, - 0.521716, - 0.6068680000000001, - 0.549079, - 0.693545, - 0.660103, - 0.616464, - 0.533, - 0.429118, - 0.266293, - 0.07458799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020997, - 0.100888, - 0.253633, - 0.402929, - 0.517123, - 0.604727, - 0.659985, - 0.682594, - 0.6037659999999999, - 0.638048, - 0.553135, - 0.42764800000000003, - 0.26276799999999995, - 0.071005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028897, - 0.113844, - 0.249609, - 0.39856400000000003, - 0.5141549999999999, - 0.6044400000000001, - 0.666029, - 0.607283, - 0.600102, - 0.635918, - 0.549432, - 0.423261, - 0.255003, - 0.063182, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020119, - 0.09899899999999999, - 0.260906, - 0.423226, - 0.5476219999999999, - 0.645141, - 0.7069249999999999, - 0.73234, - 0.726557, - 0.677039, - 0.585688, - 0.461669, - 0.295286, - 0.091782, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015269999999999999, - 0.09520300000000001, - 0.26600799999999997, - 0.434211, - 0.562392, - 0.659971, - 0.723285, - 0.750144, - 0.738059, - 0.6854690000000001, - 0.595653, - 0.474462, - 0.30478, - 0.096864, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017865, - 0.096731, - 0.260981, - 0.419622, - 0.5418390000000001, - 0.631182, - 0.69377, - 0.720213, - 0.713957, - 0.662571, - 0.56544, - 0.434851, - 0.26069400000000004, - 0.063982, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022208, - 0.080524, - 0.225825, - 0.19797599999999999, - 0.47744400000000004, - 0.51709, - 0.480547, - 0.5324439999999999, - 0.5181570000000001, - 0.30031599999999997, - 0.421907, - 0.33696699999999996, - 0.130136, - 0.025422999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022985, - 0.104113, - 0.263714, - 0.43166000000000004, - 0.566153, - 0.6727069999999999, - 0.7365470000000001, - 0.7591789999999999, - 0.749519, - 0.700761, - 0.6080420000000001, - 0.480852, - 0.30954899999999996, - 0.097959, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014365000000000001, - 0.092807, - 0.266898, - 0.434012, - 0.557763, - 0.651161, - 0.712433, - 0.737877, - 0.730308, - 0.6841860000000001, - 0.595716, - 0.47004399999999996, - 0.301123, - 0.09433799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012910999999999999, - 0.088561, - 0.26306599999999997, - 0.42767700000000003, - 0.546597, - 0.635273, - 0.6970839999999999, - 0.721092, - 0.712581, - 0.6653490000000001, - 0.577188, - 0.452934, - 0.28712, - 0.085229, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006144, - 0.072597, - 0.21785400000000002, - 0.32965300000000003, - 0.420774, - 0.311459, - 0.405716, - 0.415692, - 0.487978, - 0.604346, - 0.5269790000000001, - 0.429645, - 0.26350599999999996, - 0.068858, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008376, - 0.085655, - 0.240153, - 0.39503, - 0.513414, - 0.6101960000000001, - 0.670298, - 0.6962809999999999, - 0.6837709999999999, - 0.638852, - 0.5501119999999999, - 0.421825, - 0.258608, - 0.067899, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014358000000000001, - 0.082956, - 0.244317, - 0.407253, - 0.531556, - 0.627597, - 0.690182, - 0.7161259999999999, - 0.708193, - 0.66025, - 0.573718, - 0.449673, - 0.283038, - 0.08023000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012359, - 0.083342, - 0.254724, - 0.42151299999999997, - 0.545157, - 0.639306, - 0.701758, - 0.727296, - 0.715408, - 0.666913, - 0.579238, - 0.452719, - 0.284429, - 0.079108, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011787, - 0.08241, - 0.255719, - 0.42507, - 0.5530109999999999, - 0.649968, - 0.714746, - 0.7403010000000001, - 0.729478, - 0.677739, - 0.5853400000000001, - 0.458611, - 0.291087, - 0.084497, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011139, - 0.080046, - 0.251006, - 0.419069, - 0.546774, - 0.648371, - 0.7146979999999999, - 0.7427849999999999, - 0.734052, - 0.6857730000000001, - 0.59599, - 0.47040899999999997, - 0.30153399999999997, - 0.088377, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011013, - 0.07839600000000001, - 0.25191399999999997, - 0.419217, - 0.547359, - 0.647794, - 0.712291, - 0.739253, - 0.731583, - 0.678952, - 0.5866979999999999, - 0.463983, - 0.292891, - 0.08439100000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011839, - 0.079134, - 0.244514, - 0.413091, - 0.539215, - 0.636619, - 0.699025, - 0.722052, - 0.7150460000000001, - 0.663289, - 0.571649, - 0.443492, - 0.273619, - 0.06954300000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013233, - 0.076824, - 0.23408600000000002, - 0.391855, - 0.515046, - 0.609047, - 0.671285, - 0.694133, - 0.6833980000000001, - 0.632943, - 0.53928, - 0.417165, - 0.24212299999999998, - 0.008747, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002205, - 0.060087, - 0.066703, - 0.061622, - 0.527976, - 0.548909, - 0.654336, - 0.057665999999999995, - 0.182323, - 0.15757300000000002, - 0.020325, - 0.194739, - 0.037573999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012839, - 0.075033, - 0.22655099999999997, - 0.38497899999999996, - 0.506945, - 0.605019, - 0.668603, - 0.696049, - 0.6871470000000001, - 0.640715, - 0.5535549999999999, - 0.428981, - 0.259893, - 0.060357999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010396, - 0.069926, - 0.232794, - 0.399962, - 0.525154, - 0.623178, - 0.687566, - 0.714152, - 0.708483, - 0.6577430000000001, - 0.567776, - 0.431778, - 0.260916, - 0.058487000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010336, - 0.069288, - 0.232119, - 0.399707, - 0.52426, - 0.617101, - 0.6799679999999999, - 0.709234, - 0.700797, - 0.653409, - 0.56694, - 0.435607, - 0.264786, - 0.058756, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010948000000000001, - 0.069075, - 0.226404, - 0.388567, - 0.5140520000000001, - 0.6115309999999999, - 0.674446, - 0.700124, - 0.6941609999999999, - 0.644325, - 0.5539700000000001, - 0.423779, - 0.252897, - 0.051446, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011082000000000002, - 0.070036, - 0.228192, - 0.39149900000000004, - 0.517974, - 0.612448, - 0.673365, - 0.699509, - 0.6920850000000001, - 0.643783, - 0.5547430000000001, - 0.423311, - 0.25237, - 0.049784, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009726, - 0.06748399999999999, - 0.22647399999999998, - 0.394104, - 0.517725, - 0.609525, - 0.671552, - 0.6961219999999999, - 0.681842, - 0.635043, - 0.549022, - 0.42486599999999997, - 0.254637, - 0.048682, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009658, - 0.067162, - 0.225335, - 0.38910500000000003, - 0.513875, - 0.6088279999999999, - 0.6713899999999999, - 0.6976140000000001, - 0.692068, - 0.641728, - 0.551953, - 0.42200299999999996, - 0.249338, - 0.043825, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008955, - 0.066488, - 0.220694, - 0.38380000000000003, - 0.506253, - 0.600657, - 0.6613519999999999, - 0.68536, - 0.671268, - 0.6189199999999999, - 0.526573, - 0.404606, - 0.2324, - 0.034133000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.050389, - 0.008494, - 0.336312, - 0.511779, - 0.546467, - 0.59235, - 0.6204700000000001, - 0.67915, - 0.631475, - 0.538789, - 0.414354, - 0.240531, - 0.034908, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008967000000000001, - 0.06644, - 0.21757300000000002, - 0.380574, - 0.5051, - 0.6020449999999999, - 0.668685, - 0.696954, - 0.686457, - 0.6397569999999999, - 0.5485209999999999, - 0.42399000000000003, - 0.249579, - 0.038522, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0070940000000000005, - 0.059997, - 0.22059600000000001, - 0.388202, - 0.509516, - 0.603343, - 0.6612870000000001, - 0.688064, - 0.681895, - 0.634714, - 0.5456319999999999, - 0.416291, - 0.240926, - 0.03325, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007326, - 0.06472199999999999, - 0.21662700000000001, - 0.381856, - 0.5063070000000001, - 0.600094, - 0.663378, - 0.687422, - 0.536577, - 0.625291, - 0.531554, - 0.40182, - 0.223405, - 0.024625, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007567, - 0.07642700000000001, - 0.21968100000000002, - 0.38323, - 0.514033, - 0.617521, - 0.685303, - 0.716216, - 0.702542, - 0.6519980000000001, - 0.5560069999999999, - 0.42899400000000004, - 0.245564, - 0.030533, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007042, - 0.06167, - 0.229599, - 0.413868, - 0.5517329999999999, - 0.659461, - 0.7268450000000001, - 0.7516849999999999, - 0.7405109999999999, - 0.6842480000000001, - 0.583973, - 0.447127, - 0.25920499999999996, - 0.035338999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004764, - 0.055043, - 0.224062, - 0.404715, - 0.538655, - 0.63849, - 0.706203, - 0.734191, - 0.7212759999999999, - 0.667336, - 0.5711390000000001, - 0.438008, - 0.252701, - 0.030973, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0047599999999999995, - 0.054426999999999996, - 0.224475, - 0.402048, - 0.5325599999999999, - 0.627257, - 0.695392, - 0.726533, - 0.717384, - 0.666227, - 0.572203, - 0.442719, - 0.256584, - 0.033412, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004216, - 0.052094999999999995, - 0.220697, - 0.398346, - 0.531594, - 0.632377, - 0.700716, - 0.7318600000000001, - 0.719756, - 0.668351, - 0.571296, - 0.439572, - 0.252611, - 0.031008, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0036829999999999996, - 0.050256999999999996, - 0.21713, - 0.392427, - 0.525606, - 0.626377, - 0.694378, - 0.725244, - 0.7141810000000001, - 0.663138, - 0.568378, - 0.435198, - 0.24833000000000002, - 0.023727, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004335, - 0.050002000000000005, - 0.213032, - 0.393902, - 0.532775, - 0.6357619999999999, - 0.702981, - 0.728284, - 0.7184149999999999, - 0.663099, - 0.565469, - 0.43176299999999995, - 0.243642, - 0.022482, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003791, - 0.048428, - 0.204373, - 0.377019, - 0.5076080000000001, - 0.604583, - 0.6661889999999999, - 0.69101, - 0.680314, - 0.6247440000000001, - 0.531103, - 0.40528, - 0.225583, - 0.016439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003758, - 0.046801, - 0.20019800000000001, - 0.371987, - 0.49792899999999995, - 0.59409, - 0.658101, - 0.685132, - 0.6775829999999999, - 0.626972, - 0.534963, - 0.402933, - 0.22134600000000001, - 0.014374000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003262, - 0.045433, - 0.196762, - 0.36493000000000003, - 0.476262, - 0.49000900000000003, - 0.6547949999999999, - 0.6787859999999999, - 0.5678479999999999, - 0.46218400000000004, - 0.456867, - 0.35245800000000005, - 0.170882, - 0.006575999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0027879999999999997, - 0.054009999999999996, - 0.194489, - 0.36103500000000005, - 0.490622, - 0.584336, - 0.646562, - 0.672489, - 0.660828, - 0.6102759999999999, - 0.512532, - 0.36214100000000005, - 0.176904, - 0.001553, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002406, - 0.050725, - 0.192762, - 0.357108, - 0.483731, - 0.5708529999999999, - 0.631505, - 0.65661, - 0.644574, - 0.593099, - 0.49446300000000004, - 0.350029, - 0.168821, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003706, - 0.048502, - 0.189285, - 0.35517899999999997, - 0.484437, - 0.5843189999999999, - 0.6475700000000001, - 0.675353, - 0.665142, - 0.612852, - 0.515073, - 0.375712, - 0.18917799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0037029999999999997, - 0.042332, - 0.192302, - 0.363353, - 0.49793200000000004, - 0.599075, - 0.664736, - 0.6931430000000001, - 0.6805410000000001, - 0.626222, - 0.532006, - 0.395277, - 0.20530099999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004319, - 0.052997999999999997, - 0.19627699999999998, - 0.376267, - 0.46911, - 0.6151810000000001, - 0.6267619999999999, - 0.706585, - 0.694014, - 0.637019, - 0.538375, - 0.400648, - 0.20827099999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003241, - 0.038249000000000005, - 0.198876, - 0.377471, - 0.510808, - 0.6074510000000001, - 0.673135, - 0.701861, - 0.686087, - 0.631721, - 0.533034, - 0.39372199999999996, - 0.20063399999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002592, - 0.036761, - 0.19174000000000002, - 0.369363, - 0.502275, - 0.597449, - 0.65742, - 0.681772, - 0.668782, - 0.613255, - 0.5174160000000001, - 0.376277, - 0.180744, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002052, - 0.035203000000000005, - 0.188702, - 0.36727699999999996, - 0.5019669999999999, - 0.601668, - 0.664197, - 0.685483, - 0.674395, - 0.615738, - 0.514505, - 0.375868, - 0.182801, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0021469999999999996, - 0.038194000000000006, - 0.193586, - 0.37768999999999997, - 0.518423, - 0.6197229999999999, - 0.686964, - 0.71156, - 0.6956760000000001, - 0.637334, - 0.536736, - 0.394197, - 0.194174, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0015609999999999999, - 0.034594, - 0.185645, - 0.362445, - 0.497731, - 0.597782, - 0.6618120000000001, - 0.6865119999999999, - 0.676207, - 0.618615, - 0.5189400000000001, - 0.37817500000000004, - 0.18138200000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.000907, - 0.036285, - 0.175542, - 0.345342, - 0.483011, - 0.583451, - 0.648404, - 0.6755890000000001, - 0.573597, - 0.518734, - 0.421162, - 0.345314, - 0.15546000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04517, - 0.17676499999999998, - 0.32343099999999997, - 0.437333, - 0.568831, - 0.558592, - 0.547962, - 0.560021, - 0.164274, - 0.10155299999999999, - 0.291916, - 0.139462, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035252000000000006, - 0.170131, - 0.33770999999999995, - 0.47226799999999997, - 0.573342, - 0.637828, - 0.662858, - 0.651032, - 0.596071, - 0.493921, - 0.354643, - 0.15862700000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028522, - 0.17037799999999997, - 0.337829, - 0.463931, - 0.560914, - 0.624885, - 0.6509790000000001, - 0.639492, - 0.584874, - 0.48953199999999997, - 0.349303, - 0.15633699999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027691, - 0.16730799999999998, - 0.330109, - 0.452658, - 0.54118, - 0.5947279999999999, - 0.616545, - 0.607677, - 0.397238, - 0.269435, - 0.295717, - 0.136834, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040216999999999996, - 0.16489099999999998, - 0.32980200000000004, - 0.46308699999999997, - 0.5653360000000001, - 0.6303909999999999, - 0.655085, - 0.320444, - 0.033862, - 0.474746, - 0.062027, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034892000000000006, - 0.161831, - 0.31729599999999997, - 0.44262999999999997, - 0.541862, - 0.599178, - 0.622563, - 0.611761, - 0.489734, - 0.39599900000000005, - 0.347311, - 0.143767, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026693, - 0.169374, - 0.34151299999999996, - 0.476358, - 0.574286, - 0.639289, - 0.6667029999999999, - 0.652805, - 0.595031, - 0.491558, - 0.344903, - 0.140491, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026033, - 0.168294, - 0.337534, - 0.45926999999999996, - 0.556965, - 0.618957, - 0.18812, - 0.02104, - 0.016468, - 0.480293, - 0.335435, - 0.133781, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02579, - 0.16270199999999999, - 0.332988, - 0.47118400000000005, - 0.568487, - 0.629327, - 0.6509020000000001, - 0.245273, - 0.206608, - 0.049485, - 0.209151, - 0.12247, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031414000000000004, - 0.15953299999999998, - 0.33054300000000003, - 0.464935, - 0.560757, - 0.6183930000000001, - 0.638304, - 0.620093, - 0.558686, - 0.457343, - 0.30601, - 0.106708, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026607, - 0.156634, - 0.323895, - 0.456745, - 0.550177, - 0.605601, - 0.624024, - 0.604309, - 0.5461520000000001, - 0.16786500000000001, - 0.302014, - 0.02018, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026334, - 0.154117, - 0.32475, - 0.4595, - 0.55892, - 0.6207910000000001, - 0.645293, - 0.629435, - 0.568341, - 0.46151400000000004, - 0.310092, - 0.104004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027600000000000003, - 0.155311, - 0.325521, - 0.46307, - 0.5626530000000001, - 0.6249410000000001, - 0.6499969999999999, - 0.633167, - 0.567286, - 0.453003, - 0.297554, - 0.09295300000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024682, - 0.164114, - 0.348082, - 0.495145, - 0.598496, - 0.661555, - 0.683888, - 0.6691950000000001, - 0.6033740000000001, - 0.492473, - 0.325659, - 0.108192, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026834, - 0.166578, - 0.35272899999999996, - 0.501888, - 0.6054360000000001, - 0.670665, - 0.689557, - 0.668762, - 0.6023740000000001, - 0.49011, - 0.328067, - 0.108168, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02573, - 0.15929300000000002, - 0.334464, - 0.477094, - 0.582044, - 0.647531, - 0.670793, - 0.651664, - 0.589489, - 0.482098, - 0.322257, - 0.105977, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020762, - 0.152944, - 0.331853, - 0.470142, - 0.567444, - 0.62151, - 0.631593, - 0.6006739999999999, - 0.5345059999999999, - 0.437367, - 0.29520100000000005, - 0.09419799999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023177, - 0.148685, - 0.320337, - 0.45677100000000004, - 0.550944, - 0.603688, - 0.61462, - 0.58198, - 0.5214059999999999, - 0.425195, - 0.280435, - 0.07986499999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028735, - 0.145049, - 0.316523, - 0.4555, - 0.552803, - 0.614398, - 0.636577, - 0.614232, - 0.5455760000000001, - 0.42998200000000003, - 0.24566300000000002, - 0.049561999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041433, - 0.160016, - 0.32043, - 0.45470499999999997, - 0.561686, - 0.6248630000000001, - 0.642989, - 0.624125, - 0.547856, - 0.41922699999999996, - 0.27246, - 0.060986, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028337, - 0.15812600000000002, - 0.350606, - 0.510111, - 0.624958, - 0.6937000000000001, - 0.7137279999999999, - 0.690329, - 0.614171, - 0.491234, - 0.316239, - 0.084751, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019629, - 0.15628299999999998, - 0.356049, - 0.517777, - 0.628539, - 0.696067, - 0.7155739999999999, - 0.686437, - 0.612634, - 0.49401999999999996, - 0.316144, - 0.078977, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019627, - 0.15236000000000002, - 0.34830700000000003, - 0.502654, - 0.610303, - 0.673176, - 0.687809, - 0.660211, - 0.5882179999999999, - 0.47154700000000005, - 0.30415699999999996, - 0.07146, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018670000000000003, - 0.145079, - 0.330868, - 0.47529899999999997, - 0.571699, - 0.627418, - 0.641167, - 0.612177, - 0.55034, - 0.445312, - 0.283765, - 0.055082, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025106000000000003, - 0.143262, - 0.32313400000000003, - 0.473189, - 0.583905, - 0.649033, - 0.671961, - 0.647969, - 0.579321, - 0.45743, - 0.282055, - 0.045747, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019072, - 0.142363, - 0.334135, - 0.483382, - 0.582794, - 0.638775, - 0.650051, - 0.618949, - 0.5502659999999999, - 0.43764600000000003, - 0.275989, - 0.04523, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016972, - 0.135246, - 0.318172, - 0.467005, - 0.569397, - 0.632992, - 0.652594, - 0.624049, - 0.551647, - 0.431859, - 0.258183, - 0.034454, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03392, - 0.143803, - 0.308653, - 0.45469400000000004, - 0.577493, - 0.646537, - 0.6692380000000001, - 0.643913, - 0.573372, - 0.45510700000000004, - 0.27647000000000005, - 0.038785, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016808, - 0.13670500000000002, - 0.333642, - 0.493114, - 0.6011040000000001, - 0.6654650000000001, - 0.682093, - 0.653157, - 0.577509, - 0.45358800000000005, - 0.27064, - 0.034713, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016625, - 0.133047, - 0.32539100000000004, - 0.4801, - 0.582109, - 0.641714, - 0.653683, - 0.622869, - 0.54818, - 0.430955, - 0.257235, - 0.030501999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017327000000000002, - 0.129498, - 0.31838, - 0.469942, - 0.572837, - 0.630892, - 0.6420950000000001, - 0.610179, - 0.539514, - 0.424291, - 0.250843, - 0.024068000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018748, - 0.123722, - 0.298673, - 0.446699, - 0.549755, - 0.612206, - 0.632017, - 0.611423, - 0.542318, - 0.424784, - 0.246139, - 0.019591, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016309, - 0.122647, - 0.306, - 0.453239, - 0.551635, - 0.609603, - 0.623991, - 0.5995309999999999, - 0.532038, - 0.41683, - 0.240323, - 0.017745999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021582, - 0.115642, - 0.263413, - 0.454755, - 0.491541, - 0.49435700000000005, - 0.530594, - 0.39805, - 0.2035, - 0.416812, - 0.237353, - 0.012351, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020507, - 0.120211, - 0.290563, - 0.43057999999999996, - 0.491247, - 0.541956, - 0.5486409999999999, - 0.49662599999999996, - 0.38991899999999996, - 0.278353, - 0.09794, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019234, - 0.117404, - 0.291497, - 0.39809500000000003, - 0.49853800000000004, - 0.503397, - 0.344077, - 0.419796, - 0.26274400000000003, - 0.27703, - 0.048600000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014146, - 0.108515, - 0.279557, - 0.425545, - 0.525098, - 0.586424, - 0.607817, - 0.582203, - 0.510394, - 0.39167399999999997, - 0.21320699999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026803, - 0.109038, - 0.27809100000000003, - 0.42567, - 0.5247050000000001, - 0.585491, - 0.6059640000000001, - 0.580659, - 0.508039, - 0.38935899999999996, - 0.210395, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015934, - 0.10765000000000001, - 0.28364, - 0.43655700000000003, - 0.5409149999999999, - 0.601958, - 0.622989, - 0.5934619999999999, - 0.516301, - 0.38929199999999997, - 0.20306, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021373999999999997, - 0.113966, - 0.294193, - 0.452386, - 0.5606789999999999, - 0.623184, - 0.640541, - 0.610893, - 0.399771, - 0.275714, - 0.012269, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021675999999999997, - 0.054216, - 0.188391, - 0.457881, - 0.320547, - 0.628421, - 0.645186, - 0.146784, - 0.210635, - 0.409476, - 0.003243, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016558, - 0.110849, - 0.30462900000000004, - 0.46896899999999997, - 0.574121, - 0.636926, - 0.10100100000000001, - 0.22568000000000002, - 0.013538999999999999, - 0.020867, - 0.105484, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014417999999999999, - 0.108964, - 0.296205, - 0.45997899999999997, - 0.562276, - 0.620347, - 0.630869, - 0.595223, - 0.517557, - 0.385719, - 0.191909, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015006, - 0.103364, - 0.285589, - 0.444543, - 0.546606, - 0.601958, - 0.613777, - 0.5816330000000001, - 0.506781, - 0.38399700000000003, - 0.19004400000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013465999999999999, - 0.099857, - 0.28169, - 0.436247, - 0.527183, - 0.5742430000000001, - 0.5840270000000001, - 0.5545739999999999, - 0.484151, - 0.368274, - 0.183171, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014198, - 0.096846, - 0.271457, - 0.428192, - 0.45867399999999997, - 0.500135, - 0.596468, - 0.5606749999999999, - 0.480524, - 0.35158999999999996, - 0.165744, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012844, - 0.093041, - 0.268944, - 0.426606, - 0.522905, - 0.5766939999999999, - 0.5883339999999999, - 0.555363, - 0.48060899999999995, - 0.355602, - 0.164939, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012572, - 0.088457, - 0.267779, - 0.425342, - 0.524646, - 0.582369, - 0.5960080000000001, - 0.5633980000000001, - 0.484224, - 0.356865, - 0.167806, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012602, - 0.088533, - 0.265461, - 0.417996, - 0.510648, - 0.55791, - 0.560605, - 0.526474, - 0.460067, - 0.343534, - 0.160415, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011151, - 0.085096, - 0.25358, - 0.35207900000000003, - 0.448166, - 0.544276, - 0.498214, - 0.435467, - 0.463183, - 0.293525, - 0.142041, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014341, - 0.09349500000000001, - 0.249924, - 0.395438, - 0.492132, - 0.5464600000000001, - 0.5587519999999999, - 0.539678, - 0.462428, - 0.330882, - 0.131966, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011526, - 0.08245699999999999, - 0.24977000000000002, - 0.403973, - 0.506021, - 0.56638, - 0.5811839999999999, - 0.550513, - 0.472715, - 0.33954500000000004, - 0.14180600000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01084, - 0.07956300000000001, - 0.254581, - 0.41196, - 0.514171, - 0.569572, - 0.577404, - 0.539989, - 0.461469, - 0.329453, - 0.137042, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010066, - 0.078899, - 0.254035, - 0.414891, - 0.517042, - 0.571585, - 0.578798, - 0.539216, - 0.46134800000000004, - 0.330572, - 0.134604, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01093, - 0.078538, - 0.249608, - 0.401886, - 0.5041789999999999, - 0.564115, - 0.580937, - 0.547063, - 0.467524, - 0.331009, - 0.12099800000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011654999999999999, - 0.079303, - 0.248606, - 0.402495, - 0.503517, - 0.556442, - 0.563722, - 0.531046, - 0.45588, - 0.32256599999999996, - 0.11188, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010865, - 0.076034, - 0.244171, - 0.396067, - 0.493348, - 0.5422, - 0.547591, - 0.513729, - 0.438987, - 0.30879399999999996, - 0.109361, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00977, - 0.070588, - 0.239925, - 0.397959, - 0.501992, - 0.559274, - 0.570064, - 0.5356420000000001, - 0.454618, - 0.315698, - 0.11948600000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0074470000000000005, - 0.06843300000000001, - 0.23627199999999998, - 0.392712, - 0.494585, - 0.548917, - 0.55651, - 0.52218, - 0.442584, - 0.307125, - 0.10916500000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008605999999999999, - 0.07181399999999999, - 0.22759700000000002, - 0.376847, - 0.480923, - 0.536458, - 0.544621, - 0.462384, - 0.255008, - 0.18303, - 0.052302999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008112, - 0.074227, - 0.228525, - 0.379503, - 0.48598899999999995, - 0.540726, - 0.548909, - 0.5126369999999999, - 0.418508, - 0.270399, - 0.077764, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007749, - 0.072157, - 0.23093, - 0.393192, - 0.507895, - 0.574299, - 0.592947, - 0.559925, - 0.476735, - 0.324141, - 0.110494, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006375, - 0.063473, - 0.23783, - 0.40561, - 0.5158959999999999, - 0.572276, - 0.5803809999999999, - 0.5455270000000001, - 0.46213600000000005, - 0.317813, - 0.108598, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005873000000000001, - 0.062871, - 0.234459, - 0.40124200000000004, - 0.510193, - 0.565258, - 0.572484, - 0.530956, - 0.44592200000000004, - 0.301738, - 0.09847199999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005915, - 0.059368000000000004, - 0.225094, - 0.385496, - 0.49349, - 0.548102, - 0.557685, - 0.5205890000000001, - 0.437167, - 0.29258, - 0.090475, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004703000000000001, - 0.055111, - 0.218488, - 0.37741199999999997, - 0.47995, - 0.532036, - 0.538789, - 0.363999, - 0.38389100000000004, - 0.227379, - 0.083725, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004203999999999999, - 0.052469999999999996, - 0.21352600000000002, - 0.29968900000000004, - 0.463871, - 0.519541, - 0.532817, - 0.502014, - 0.425288, - 0.282097, - 0.030282, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003858, - 0.051325, - 0.212505, - 0.376122, - 0.438087, - 0.368165, - 0.29334, - 0.5191749999999999, - 0.324235, - 0.257587, - 0.059719, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0062439999999999996, - 0.052503999999999995, - 0.20984999999999998, - 0.367564, - 0.480248, - 0.534892, - 0.544263, - 0.513831, - 0.432278, - 0.285289, - 0.075557, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004954, - 0.046594000000000003, - 0.214917, - 0.384074, - 0.50219, - 0.563211, - 0.572528, - 0.5340280000000001, - 0.44286000000000003, - 0.28978, - 0.071302, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00491, - 0.044882, - 0.206732, - 0.370012, - 0.483969, - 0.542529, - 0.552166, - 0.5142559999999999, - 0.427908, - 0.273356, - 0.061175, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00357, - 0.041860999999999995, - 0.193623, - 0.354693, - 0.467247, - 0.5265449999999999, - 0.536374, - 0.5005269999999999, - 0.414008, - 0.26695800000000003, - 0.056743, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0034980000000000002, - 0.041569, - 0.19050899999999998, - 0.348361, - 0.456297, - 0.509165, - 0.517521, - 0.48199200000000003, - 0.402836, - 0.262621, - 0.054134999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0022679999999999996, - 0.038299999999999994, - 0.18518, - 0.34039299999999995, - 0.44513600000000003, - 0.5011059999999999, - 0.5129130000000001, - 0.480226, - 0.399575, - 0.256271, - 0.05111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004099, - 0.038267, - 0.1827, - 0.338233, - 0.445761, - 0.499092, - 0.505823, - 0.4704, - 0.387678, - 0.243505, - 0.043196, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.001676, - 0.036893999999999996, - 0.178303, - 0.325515, - 0.428697, - 0.488695, - 0.396478, - 0.473273, - 0.39199599999999996, - 0.24518500000000001, - 0.043558, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034561999999999996, - 0.179637, - 0.339231, - 0.45571100000000003, - 0.514064, - 0.5262619999999999, - 0.489147, - 0.402827, - 0.249267, - 0.040644, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.049726, - 0.178716, - 0.325857, - 0.442704, - 0.500263, - 0.511724, - 0.354949, - 0.375467, - 0.222405, - 0.003354, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.047223, - 0.148445, - 0.323146, - 0.439634, - 0.498572, - 0.510965, - 0.477673, - 0.392849, - 0.243228, - 0.03993, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.049329, - 0.147431, - 0.317873, - 0.431045, - 0.420798, - 0.393041, - 0.33304300000000003, - 0.289225, - 0.16048300000000001, - 0.003283, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024513, - 0.166, - 0.246484, - 0.439305, - 0.501231, - 0.5159980000000001, - 0.482465, - 0.39541899999999996, - 0.240694, - 0.014435, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034071, - 0.163575, - 0.319574, - 0.435334, - 0.49550900000000003, - 0.508188, - 0.47224700000000003, - 0.384277, - 0.23274799999999998, - 0.030787, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028053, - 0.170239, - 0.342827, - 0.468118, - 0.530691, - 0.5413479999999999, - 0.5046809999999999, - 0.41410399999999997, - 0.252604, - 0.036179, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027036, - 0.160808, - 0.32417399999999996, - 0.445446, - 0.5066700000000001, - 0.518914, - 0.480599, - 0.392736, - 0.198436, - 0.008966, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04329, - 0.137412, - 0.318168, - 0.356483, - 0.422142, - 0.29512700000000003, - 0.22827799999999998, - 0.10830500000000001, - 0.19349100000000002, - 0.007622, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024626000000000002, - 0.127847, - 0.300428, - 0.32883999999999997, - 0.369216, - 0.174101, - 0.465995, - 0.377093, - 0.223878, - 0.021969000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023608, - 0.14851699999999998, - 0.304599, - 0.423184, - 0.41639, - 0.375704, - 0.341638, - 0.175588, - 0.069423, - 0.001113, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021927, - 0.145751, - 0.303068, - 0.420722, - 0.48135700000000003, - 0.49212700000000004, - 0.45594799999999996, - 0.368293, - 0.218803, - 0.0224, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038405, - 0.128071, - 0.240071, - 0.406428, - 0.472225, - 0.486372, - 0.454152, - 0.36651100000000003, - 0.152801, - 0.007687, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019294000000000002, - 0.1426, - 0.30772000000000005, - 0.433716, - 0.501486, - 0.515053, - 0.478765, - 0.38622, - 0.231026, - 0.008407, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0358, - 0.13858199999999998, - 0.30002, - 0.42083, - 0.488451, - 0.504079, - 0.471794, - 0.38372300000000004, - 0.230656, - 0.024569, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03504, - 0.136912, - 0.29262299999999997, - 0.40756099999999995, - 0.47457, - 0.490066, - 0.456538, - 0.366999, - 0.219945, - 0.022914999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031671, - 0.129879, - 0.28530399999999995, - 0.400046, - 0.457351, - 0.46839400000000003, - 0.441003, - 0.357495, - 0.217243, - 0.024175000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031918, - 0.11557200000000001, - 0.225499, - 0.337966, - 0.366031, - 0.36238600000000004, - 0.420497, - 0.34575599999999995, - 0.206517, - 0.018195, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031004, - 0.11271099999999999, - 0.27783800000000003, - 0.398197, - 0.468519, - 0.485074, - 0.456695, - 0.36794499999999997, - 0.221658, - 0.023382, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018123, - 0.123852, - 0.277043, - 0.39824, - 0.468375, - 0.48373700000000003, - 0.452926, - 0.362011, - 0.100378, - 0.001062, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015433, - 0.1003, - 0.169103, - 0.012362, - 0.069453, - 0.02618, - 0.032836, - 0.089752, - 0.057529000000000004, - 0.018931, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019308, - 0.11791800000000001, - 0.23688800000000002, - 0.33281099999999997, - 0.35771600000000003, - 0.388589, - 0.294707, - 0.133349, - 0.020681, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02978, - 0.081661, - 0.081497, - 0.127044, - 0.30551100000000003, - 0.30452100000000004, - 0.349049, - 0.27181900000000003, - 0.19911199999999998, - 0.008417999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019417, - 0.00507, - 0.269522, - 0.25605500000000003, - 0.31869, - 0.355527, - 0.192547, - 0.005702, - 0.212474, - 0.00495, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016727, - 0.115767, - 0.276733, - 0.407408, - 0.483899, - 0.501855, - 0.470854, - 0.377678, - 0.219218, - 0.00566, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016395, - 0.110535, - 0.264308, - 0.388204, - 0.461442, - 0.396701, - 0.44893299999999997, - 0.258955, - 0.16026300000000002, - 0.015656, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015242, - 0.107361, - 0.265229, - 0.38938, - 0.463727, - 0.480802, - 0.326678, - 0.35862700000000003, - 0.210562, - 0.01691, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014320000000000001, - 0.10586799999999999, - 0.26651400000000003, - 0.39705, - 0.474051, - 0.49103600000000003, - 0.460149, - 0.368087, - 0.214315, - 0.017287, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017095, - 0.10795199999999999, - 0.269247, - 0.363124, - 0.415662, - 0.487822, - 0.37482, - 0.365502, - 0.21853999999999998, - 0.019392, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016571000000000002, - 0.103965, - 0.25855700000000004, - 0.388065, - 0.467049, - 0.491435, - 0.202034, - 0.139657, - 0.212981, - 0.016862, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017519, - 0.104399, - 0.223208, - 0.26349, - 0.461322, - 0.027924, - 0.18437, - 0.075902, - 0.114093, - 0.01255, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014461, - 0.100655, - 0.261627, - 0.392564, - 0.474194, - 0.494601, - 0.46223000000000003, - 0.370999, - 0.22018100000000002, - 0.020017, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012962, - 0.096459, - 0.258548, - 0.391909, - 0.47139299999999995, - 0.490476, - 0.460296, - 0.369682, - 0.219828, - 0.02145, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014534, - 0.09214499999999999, - 0.249162, - 0.373382, - 0.443996, - 0.46560700000000005, - 0.43911, - 0.35534, - 0.212071, - 0.019731000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015982, - 0.093087, - 0.247673, - 0.30356299999999997, - 0.344598, - 0.34093900000000005, - 0.077362, - 0.274238, - 0.21615, - 0.006972000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013977999999999999, - 0.092719, - 0.25410499999999997, - 0.39049700000000004, - 0.47460199999999997, - 0.498553, - 0.47124099999999997, - 0.381393, - 0.229847, - 0.027805, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012282, - 0.090195, - 0.249362, - 0.379623, - 0.457867, - 0.478224, - 0.45105700000000004, - 0.366059, - 0.22231499999999998, - 0.008119999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015318, - 0.067986, - 0.239786, - 0.313183, - 0.36279199999999995, - 0.472178, - 0.40834899999999996, - 0.36400099999999996, - 0.219602, - 0.026751, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01312, - 0.089171, - 0.24725999999999998, - 0.377116, - 0.455316, - 0.476594, - 0.448678, - 0.365416, - 0.223308, - 0.026364000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01299, - 0.08673099999999999, - 0.240145, - 0.36300099999999996, - 0.43370299999999995, - 0.45855399999999996, - 0.43380599999999997, - 0.352288, - 0.21258600000000002, - 0.021421, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017677, - 0.085305, - 0.17767, - 0.32278500000000004, - 0.446299, - 0.38473, - 0.459871, - 0.37632600000000005, - 0.228691, - 0.022157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013106, - 0.084346, - 0.237018, - 0.36603600000000003, - 0.3561, - 0.473454, - 0.447892, - 0.36342599999999997, - 0.21998900000000002, - 0.027123, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012423, - 0.08306699999999999, - 0.236769, - 0.365106, - 0.444654, - 0.46827199999999997, - 0.279446, - 0.304064, - 0.092012, - 0.003676, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010861, - 0.08023999999999999, - 0.23147399999999999, - 0.363142, - 0.444095, - 0.468506, - 0.445505, - 0.325445, - 0.22001300000000001, - 0.012516, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010676999999999999, - 0.08087699999999999, - 0.244512, - 0.38294799999999996, - 0.466282, - 0.402357, - 0.327062, - 0.266517, - 0.11505800000000001, - 0.006304000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010734, - 0.079748, - 0.241654, - 0.37618, - 0.38869600000000004, - 0.432772, - 0.461676, - 0.38021499999999997, - 0.240602, - 0.040451999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009797, - 0.07568899999999999, - 0.230685, - 0.301072, - 0.360999, - 0.358965, - 0.315016, - 0.241184, - 0.116732, - 0.006809999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015914, - 0.075569, - 0.127181, - 0.229742, - 0.335644, - 0.389944, - 0.296982, - 0.174226, - 0.226387, - 0.016794, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008386, - 0.077758, - 0.19381299999999999, - 0.230327, - 0.145797, - 0.137462, - 0.04218, - 0.09569799999999999, - 0.077393, - 0.004096, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01494, - 0.007328, - 0.126896, - 0.080486, - 0.118131, - 0.048034999999999994, - 0.10512, - 0.280267, - 0.057217, - 0.034523000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012052, - 0.04059599999999999, - 0.14897, - 0.051662, - 0.141411, - 0.144173, - 0.124481, - 0.089459, - 0.077465, - 0.005256, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011965, - 0.07634300000000001, - 0.225717, - 0.361714, - 0.446392, - 0.373714, - 0.336951, - 0.37846199999999997, - 0.176695, - 0.054952, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "annual_energy_produced_kwh_bau": 45938.58, - "electric_to_load_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.393, - 2.139, - 6.711, - 10.65, - 13.116, - 13.94, - 13.336, - 11.106, - 7.211, - 1.56, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.389, - 2.138, - 6.783, - 10.767, - 13.284, - 14.135, - 13.449, - 11.252, - 7.357, - 0.248, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.388, - 2.256, - 6.862, - 11.003, - 13.68, - 14.574, - 13.999, - 11.734, - 7.738, - 1.735, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.28, - 2.201, - 6.947, - 11.0, - 13.516, - 14.351, - 13.743, - 11.52, - 7.619, - 1.719, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.384, - 2.152, - 6.757, - 10.682, - 13.15, - 13.963, - 11.042, - 7.914, - 7.479, - 0.926, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.349, - 2.145, - 6.675, - 8.171, - 9.19, - 11.085, - 13.264, - 11.208, - 7.503, - 1.818, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.252, - 2.079, - 6.57, - 10.44, - 12.913, - 13.78, - 13.292, - 11.197, - 7.442, - 1.884, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.255, - 2.174, - 6.895, - 11.102, - 13.818, - 14.726, - 14.17, - 12.047, - 8.063, - 2.193, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.388, - 2.277, - 6.795, - 10.789, - 13.371, - 14.24, - 13.733, - 11.668, - 7.912, - 2.297, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.354, - 2.106, - 6.741, - 9.333, - 10.322, - 12.222, - 9.539, - 8.85, - 5.166, - 0.881, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.152, - 0.888, - 3.869, - 10.244, - 12.813, - 11.247, - 10.752, - 11.368, - 7.01, - 2.344, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.327, - 2.193, - 6.802, - 10.79, - 13.356, - 14.223, - 13.649, - 11.635, - 7.953, - 2.559, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.301, - 2.182, - 6.756, - 10.633, - 13.149, - 14.054, - 13.614, - 11.689, - 8.003, - 2.56, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.275, - 2.193, - 6.93, - 10.976, - 11.546, - 11.029, - 10.368, - 10.168, - 6.617, - 2.894, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.395, - 2.188, - 6.53, - 8.555, - 10.898, - 8.016, - 13.363, - 5.576, - 0.874, - 0.574, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.303, - 2.268, - 6.719, - 10.762, - 13.353, - 14.312, - 13.895, - 11.942, - 8.226, - 2.891, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.285, - 2.199, - 6.661, - 10.517, - 13.037, - 11.542, - 13.602, - 11.782, - 8.152, - 2.981, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.377, - 2.315, - 5.366, - 9.195, - 11.202, - 11.629, - 8.707, - 7.932, - 3.933, - 0.606, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.417, - 1.318, - 4.194, - 6.647, - 6.872, - 14.206, - 13.834, - 7.7, - 5.937, - 0.603, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.366, - 2.396, - 6.983, - 11.045, - 13.665, - 7.462, - 1.81, - 2.555, - 0.27, - 0.388, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.488, - 2.523, - 6.167, - 9.515, - 11.238, - 12.132, - 10.105, - 8.0, - 7.165, - 3.518, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.326, - 2.432, - 7.138, - 11.09, - 13.686, - 14.685, - 14.239, - 12.407, - 8.879, - 3.554, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.342, - 2.429, - 7.005, - 8.753, - 11.325, - 11.047, - 10.582, - 9.727, - 6.237, - 1.297, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.519, - 2.526, - 4.133, - 6.252, - 6.659, - 7.151, - 6.172, - 2.509, - 1.343, - 0.531, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.625, - 3.865, - 3.047, - 4.929, - 0.164, - 15.006, - 13.092, - 9.328, - 3.833, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.546, - 2.763, - 6.495, - 0.785, - 11.368, - 11.842, - 10.208, - 0.395, - 8.907, - 3.315, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.491, - 3.036, - 8.122, - 12.549, - 15.281, - 16.302, - 15.9, - 14.03, - 10.212, - 4.517, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.348, - 2.87, - 8.053, - 12.375, - 15.041, - 16.095, - 15.668, - 13.739, - 10.072, - 4.562, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.363, - 2.859, - 7.956, - 12.078, - 14.518, - 15.421, - 11.934, - 11.35, - 6.11, - 1.821, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.634, - 2.917, - 7.797, - 10.204, - 12.198, - 12.846, - 12.08, - 10.559, - 7.564, - 2.484, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.772, - 5.337, - 8.618, - 15.08, - 16.231, - 15.865, - 13.965, - 10.328, - 4.097, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.702, - 3.282, - 7.869, - 11.784, - 14.177, - 15.271, - 15.02, - 13.395, - 9.964, - 4.439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.499, - 3.22, - 8.464, - 10.853, - 12.737, - 12.899, - 15.745, - 13.852, - 10.452, - 5.204, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.421, - 3.254, - 8.399, - 12.582, - 15.069, - 16.047, - 15.608, - 13.851, - 10.495, - 5.314, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.453, - 3.165, - 8.231, - 12.374, - 14.82, - 15.827, - 15.394, - 13.638, - 10.324, - 5.189, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.783, - 3.059, - 6.362, - 10.291, - 12.238, - 12.175, - 10.885, - 10.462, - 6.664, - 2.291, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.481, - 3.317, - 8.217, - 12.263, - 14.739, - 15.856, - 13.287, - 11.428, - 8.656, - 3.631, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.804, - 3.259, - 7.086, - 10.311, - 13.098, - 11.693, - 11.254, - 9.139, - 8.106, - 3.361, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.815, - 3.158, - 6.541, - 8.161, - 7.599, - 11.716, - 12.436, - 8.18, - 6.953, - 2.262, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.621, - 3.357, - 7.118, - 9.303, - 11.952, - 4.623, - 5.121, - 3.019, - 2.513, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.685, - 3.213, - 2.533, - 5.246, - 11.141, - 10.912, - 12.093, - 10.522, - 8.377, - 1.532, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 3.761, - 8.813, - 13.056, - 15.595, - 16.741, - 16.364, - 14.625, - 11.161, - 5.741, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.854, - 4.051, - 7.057, - 12.99, - 15.485, - 16.584, - 16.375, - 14.566, - 11.116, - 0.457, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.613, - 4.074, - 9.209, - 7.628, - 15.92, - 17.066, - 16.792, - 15.024, - 9.23, - 6.072, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.586, - 4.19, - 9.54, - 13.854, - 16.428, - 17.509, - 17.162, - 15.302, - 11.923, - 6.524, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.051, - 4.214, - 9.483, - 13.497, - 15.872, - 16.874, - 16.425, - 14.634, - 11.381, - 6.312, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.504, - 4.155, - 9.298, - 13.339, - 15.764, - 16.865, - 16.544, - 14.78, - 11.533, - 6.29, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.58, - 4.299, - 9.436, - 13.574, - 15.965, - 16.947, - 16.57, - 14.72, - 9.633, - 1.565, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.169, - 4.02, - 7.013, - 9.735, - 9.228, - 6.415, - 11.417, - 11.418, - 8.929, - 4.456, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.862, - 0.685, - 0.905, - 3.051, - 13.731, - 12.038, - 15.057, - 11.841, - 6.623, - 0.263, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.714, - 4.73, - 9.829, - 13.813, - 16.194, - 17.257, - 16.972, - 15.329, - 12.038, - 6.954, - 0.399, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.902, - 4.804, - 9.698, - 13.497, - 15.953, - 17.135, - 16.977, - 15.388, - 12.21, - 7.109, - 0.495, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.039, - 3.407, - 3.917, - 2.849, - 11.696, - 14.043, - 13.374, - 10.835, - 8.655, - 4.429, - 0.072, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.798, - 5.358, - 11.068, - 15.352, - 18.023, - 19.242, - 18.997, - 17.17, - 13.694, - 8.097, - 0.254, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.797, - 5.333, - 10.831, - 14.815, - 16.968, - 17.706, - 17.106, - 15.53, - 12.682, - 7.74, - 0.266, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.863, - 5.325, - 10.72, - 14.82, - 17.344, - 18.445, - 14.163, - 3.404, - 1.094, - 1.768, - 0.653, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.993, - 5.451, - 10.7, - 14.647, - 17.124, - 18.23, - 17.915, - 16.222, - 12.981, - 7.738, - 0.921, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.147, - 5.778, - 11.399, - 12.94, - 14.353, - 19.373, - 19.061, - 17.195, - 1.398, - 1.681, - 0.088, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.051, - 5.991, - 11.675, - 15.795, - 18.394, - 19.542, - 19.267, - 17.454, - 14.034, - 0.235, - 0.622, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.883, - 5.09, - 6.022, - 8.41, - 11.963, - 2.3, - 12.338, - 8.253, - 2.678, - 3.788, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.691, - 4.998, - 7.787, - 10.362, - 13.23, - 12.053, - 11.624, - 8.526, - 6.059, - 2.79, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037, - 1.835, - 5.086, - 9.012, - 12.996, - 14.339, - 14.349, - 16.608, - 13.091, - 8.262, - 3.715, - 0.148, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.176, - 1.345, - 6.159, - 9.128, - 12.631, - 14.334, - 15.493, - 12.617, - 11.426, - 12.821, - 7.912, - 1.241, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.227, - 1.426, - 6.267, - 11.198, - 14.698, - 12.278, - 17.994, - 17.753, - 13.414, - 12.84, - 3.989, - 1.272, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.098, - 1.964, - 5.187, - 8.038, - 14.783, - 17.108, - 14.91, - 17.991, - 16.196, - 12.89, - 8.021, - 1.392, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.138, - 1.65, - 6.803, - 12.063, - 13.423, - 15.1, - 14.515, - 14.666, - 14.325, - 10.812, - 8.666, - 0.261, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.136, - 1.687, - 7.133, - 12.588, - 16.3, - 18.531, - 19.37, - 18.913, - 17.145, - 13.86, - 6.935, - 1.138, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.158, - 1.896, - 6.876, - 12.18, - 15.692, - 17.687, - 18.139, - 17.323, - 15.884, - 10.272, - 6.555, - 1.705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.155, - 1.828, - 6.129, - 12.216, - 15.783, - 18.014, - 18.874, - 18.535, - 16.687, - 13.468, - 8.586, - 1.922, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.225, - 2.272, - 6.203, - 12.779, - 13.928, - 14.585, - 16.459, - 14.48, - 13.228, - 9.16, - 6.346, - 1.252, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.242, - 2.081, - 7.492, - 12.857, - 16.488, - 18.752, - 19.631, - 19.069, - 17.199, - 13.9, - 8.906, - 2.197, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.296, - 2.243, - 7.581, - 12.708, - 16.333, - 18.593, - 19.595, - 19.162, - 17.28, - 14.037, - 9.102, - 2.472, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.323, - 2.305, - 7.732, - 12.788, - 15.999, - 18.083, - 18.943, - 18.655, - 17.039, - 13.909, - 9.1, - 2.548, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.316, - 2.364, - 7.913, - 13.145, - 16.718, - 18.916, - 19.69, - 19.242, - 17.26, - 13.949, - 9.116, - 2.481, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.444, - 2.644, - 7.767, - 12.404, - 15.636, - 17.456, - 18.623, - 18.482, - 16.961, - 13.995, - 9.358, - 2.797, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.34, - 2.581, - 8.318, - 13.523, - 17.119, - 19.444, - 20.389, - 19.95, - 18.173, - 13.26, - 6.842, - 1.98, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.429, - 2.835, - 8.592, - 13.931, - 17.458, - 19.612, - 20.313, - 19.672, - 17.9, - 14.654, - 9.923, - 3.192, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.401, - 2.894, - 8.66, - 13.897, - 17.4, - 19.535, - 20.217, - 19.448, - 17.458, - 14.279, - 9.689, - 3.119, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.61, - 2.906, - 6.425, - 12.418, - 14.984, - 15.417, - 15.906, - 15.664, - 12.439, - 14.043, - 9.474, - 2.917, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.477, - 3.0, - 8.374, - 13.139, - 16.493, - 18.659, - 19.566, - 19.221, - 17.377, - 14.095, - 9.256, - 2.635, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.686, - 3.376, - 8.458, - 12.981, - 15.823, - 17.668, - 18.849, - 18.847, - 17.343, - 14.22, - 9.485, - 2.915, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.626, - 3.363, - 7.294, - 10.685, - 15.712, - 15.854, - 16.151, - 15.152, - 14.694, - 13.712, - 6.511, - 1.755, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.672, - 3.456, - 7.385, - 12.021, - 16.678, - 18.614, - 19.18, - 18.562, - 12.426, - 12.099, - 6.872, - 2.646, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.691, - 3.559, - 8.683, - 13.266, - 16.891, - 19.113, - 20.042, - 17.306, - 17.582, - 14.436, - 9.511, - 2.897, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.674, - 3.646, - 9.307, - 14.322, - 17.884, - 20.182, - 5.358, - 12.961, - 13.435, - 9.163, - 3.608, - 3.068, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.76, - 3.835, - 9.444, - 14.202, - 17.419, - 19.434, - 20.44, - 20.037, - 18.198, - 14.849, - 3.884, - 3.299, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.83, - 4.046, - 9.238, - 13.599, - 16.592, - 16.393, - 17.024, - 16.237, - 15.677, - 13.799, - 9.204, - 3.148, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.748, - 3.522, - 7.557, - 13.43, - 16.979, - 18.416, - 15.362, - 16.666, - 17.592, - 13.338, - 6.108, - 1.519, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.627, - 4.3, - 10.304, - 15.225, - 18.679, - 20.863, - 21.631, - 21.005, - 19.115, - 15.74, - 10.897, - 4.184, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.681, - 4.189, - 9.831, - 14.609, - 18.053, - 20.271, - 21.172, - 20.875, - 19.036, - 15.626, - 0.14, - 0.072, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.751, - 4.548, - 10.61, - 15.647, - 19.16, - 21.415, - 22.167, - 21.607, - 19.547, - 16.142, - 11.122, - 4.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.671, - 4.549, - 10.405, - 15.1, - 18.324, - 20.215, - 20.757, - 16.919, - 18.393, - 15.205, - 10.655, - 4.2, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.891, - 4.525, - 8.655, - 11.807, - 16.494, - 18.545, - 19.65, - 19.475, - 17.947, - 14.816, - 10.349, - 3.892, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.088, - 4.915, - 7.897, - 12.704, - 17.869, - 20.039, - 20.985, - 20.587, - 18.792, - 15.602, - 10.835, - 4.131, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.116, - 5.159, - 10.969, - 15.718, - 19.101, - 21.223, - 22.101, - 21.564, - 19.579, - 9.646, - 10.78, - 4.059, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.21, - 5.43, - 11.141, - 15.886, - 19.317, - 21.36, - 22.031, - 21.36, - 19.323, - 15.887, - 10.881, - 4.249, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.106, - 5.357, - 11.085, - 15.569, - 18.691, - 20.417, - 20.852, - 20.202, - 18.483, - 15.523, - 10.951, - 4.399, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.251, - 5.252, - 10.536, - 14.89, - 18.028, - 20.082, - 20.863, - 20.394, - 18.484, - 15.139, - 10.692, - 4.265, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.185, - 5.336, - 10.712, - 15.048, - 18.231, - 20.33, - 21.241, - 20.841, - 18.903, - 15.467, - 9.763, - 4.13, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.0, - 5.501, - 11.098, - 15.566, - 18.869, - 20.987, - 21.906, - 21.349, - 19.436, - 16.15, - 11.508, - 4.85, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011, - 5.511, - 7.783, - 15.85, - 4.271, - 11.909, - 22.188, - 21.609, - 16.641, - 10.795, - 1.772, - 0.074, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.504, - 5.844, - 7.815, - 15.863, - 19.186, - 21.205, - 18.761, - 21.187, - 11.177, - 5.71, - 5.517, - 1.092, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011, - 5.84, - 11.421, - 4.675, - 0.601, - 1.93, - 0.917, - 3.519, - 3.494, - 6.692, - 2.319, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.746, - 6.112, - 12.102, - 16.672, - 19.832, - 21.827, - 22.441, - 21.728, - 19.722, - 16.505, - 11.766, - 5.226, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.057, - 1.404, - 5.936, - 11.385, - 15.438, - 17.95, - 19.369, - 20.313, - 20.196, - 18.685, - 15.786, - 11.244, - 4.969, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.071, - 1.343, - 5.91, - 11.239, - 15.309, - 18.132, - 19.73, - 20.085, - 19.721, - 18.217, - 15.34, - 11.089, - 4.957, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.084, - 1.236, - 5.911, - 11.155, - 14.885, - 17.411, - 19.075, - 20.124, - 20.06, - 18.499, - 15.544, - 11.248, - 5.227, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.153, - 1.734, - 6.014, - 11.245, - 13.152, - 15.509, - 19.907, - 20.52, - 20.133, - 18.459, - 15.514, - 8.351, - 5.139, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.137, - 1.351, - 6.124, - 11.437, - 15.346, - 17.951, - 19.39, - 19.534, - 18.614, - 16.977, - 14.344, - 10.172, - 4.632, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.108, - 1.565, - 6.038, - 11.086, - 15.01, - 18.165, - 19.65, - 19.777, - 18.734, - 16.725, - 14.398, - 10.726, - 5.17, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.114, - 1.435, - 6.193, - 11.331, - 15.028, - 17.57, - 18.969, - 19.479, - 19.103, - 17.682, - 14.977, - 11.049, - 5.315, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.112, - 1.484, - 6.18, - 11.099, - 15.006, - 18.033, - 19.854, - 20.614, - 20.208, - 18.491, - 15.37, - 11.358, - 5.397, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.149, - 1.792, - 6.584, - 11.844, - 15.762, - 18.693, - 20.566, - 21.219, - 21.03, - 19.25, - 16.231, - 11.99, - 5.813, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.215, - 2.044, - 6.662, - 11.465, - 15.77, - 16.275, - 10.645, - 12.582, - 13.773, - 5.17, - 4.815, - 3.119, - 0.796, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.137, - 5.694, - 8.238, - 10.01, - 5.347, - 13.066, - 16.896, - 15.624, - 9.626, - 11.459, - 7.8, - 5.753, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.201, - 1.742, - 6.792, - 12.159, - 16.323, - 19.376, - 21.309, - 22.031, - 11.014, - 14.349, - 6.203, - 3.66, - 0.604, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.24, - 1.959, - 7.109, - 12.455, - 16.465, - 19.383, - 21.044, - 21.331, - 20.571, - 18.606, - 15.712, - 11.4, - 5.589, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.275, - 2.157, - 7.026, - 12.3, - 16.257, - 19.311, - 20.729, - 20.747, - 19.743, - 17.726, - 15.003, - 11.296, - 5.731, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.315, - 2.226, - 7.084, - 12.196, - 15.924, - 18.512, - 19.835, - 19.881, - 19.236, - 17.709, - 15.094, - 10.873, - 5.187, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.319, - 2.206, - 6.92, - 11.645, - 15.296, - 18.299, - 20.156, - 20.895, - 20.466, - 18.659, - 15.548, - 11.915, - 6.092, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.292, - 2.062, - 7.186, - 12.43, - 16.185, - 18.868, - 20.136, - 19.915, - 19.056, - 18.134, - 15.62, - 11.535, - 5.931, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.331, - 2.164, - 7.107, - 12.097, - 15.741, - 18.292, - 19.52, - 19.523, - 19.243, - 18.119, - 15.48, - 11.34, - 5.673, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.325, - 2.153, - 6.986, - 11.903, - 15.539, - 18.167, - 19.483, - 19.785, - 18.981, - 17.535, - 14.847, - 10.927, - 5.528, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.376, - 2.275, - 6.887, - 11.386, - 14.826, - 17.637, - 19.409, - 20.182, - 19.811, - 18.27, - 15.39, - 11.299, - 5.715, - 0.103, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.403, - 2.402, - 7.32, - 11.766, - 14.351, - 17.419, - 18.113, - 21.545, - 20.994, - 15.537, - 14.178, - 10.182, - 5.149, - 0.176, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.567, - 2.934, - 6.822, - 11.649, - 16.352, - 19.078, - 20.972, - 8.398, - 10.094, - 19.836, - 16.74, - 7.825, - 5.998, - 0.079, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.692, - 3.091, - 7.885, - 7.475, - 16.966, - 20.02, - 21.875, - 20.094, - 10.575, - 2.369, - 13.888, - 8.178, - 6.753, - 0.298, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.473, - 2.693, - 7.978, - 13.116, - 12.71, - 19.802, - 21.33, - 21.704, - 14.966, - 15.476, - 15.802, - 11.459, - 5.771, - 0.079, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.544, - 2.765, - 7.42, - 12.059, - 15.694, - 18.448, - 20.305, - 21.019, - 20.608, - 18.727, - 15.676, - 11.171, - 5.516, - 0.114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.74, - 3.192, - 7.849, - 12.547, - 16.272, - 19.316, - 21.189, - 21.859, - 21.191, - 19.464, - 16.336, - 11.986, - 6.213, - 0.252, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.638, - 2.98, - 7.763, - 12.589, - 16.354, - 19.297, - 21.108, - 21.761, - 21.272, - 19.577, - 16.618, - 12.414, - 6.714, - 0.378, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.544, - 2.902, - 7.937, - 12.923, - 16.741, - 19.836, - 21.654, - 22.248, - 21.672, - 19.878, - 16.883, - 12.542, - 6.869, - 0.553, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.504, - 3.011, - 8.66, - 13.994, - 17.783, - 20.433, - 22.06, - 22.468, - 21.697, - 20.033, - 17.111, - 12.855, - 7.092, - 0.595, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.65, - 3.094, - 8.338, - 13.345, - 17.156, - 19.956, - 21.727, - 22.386, - 21.824, - 20.099, - 17.053, - 12.711, - 6.882, - 0.529, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.823, - 3.371, - 8.326, - 13.384, - 17.39, - 20.324, - 22.103, - 20.183, - 4.823, - 14.992, - 16.997, - 12.342, - 6.469, - 0.478, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.772, - 3.254, - 8.139, - 13.045, - 16.76, - 19.596, - 21.404, - 22.054, - 21.688, - 19.903, - 13.356, - 10.402, - 5.463, - 0.251, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.701, - 3.181, - 8.135, - 13.209, - 17.251, - 20.27, - 22.143, - 22.873, - 22.2, - 20.471, - 17.412, - 13.098, - 7.336, - 0.77, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.526, - 3.051, - 8.307, - 13.268, - 16.744, - 19.018, - 20.312, - 20.669, - 20.315, - 18.729, - 16.039, - 12.195, - 7.167, - 0.921, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.515, - 3.076, - 8.372, - 13.316, - 16.9, - 19.449, - 20.801, - 21.016, - 20.147, - 18.144, - 15.634, - 12.183, - 7.152, - 0.895, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.529, - 3.037, - 8.132, - 12.899, - 16.452, - 18.801, - 19.952, - 19.898, - 18.897, - 17.849, - 15.802, - 12.098, - 6.913, - 0.832, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.52, - 3.003, - 7.863, - 12.354, - 15.956, - 18.731, - 20.522, - 21.261, - 20.853, - 19.229, - 16.429, - 12.397, - 7.109, - 0.958, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.476, - 3.044, - 8.082, - 12.572, - 15.874, - 18.289, - 19.627, - 20.101, - 19.576, - 18.225, - 15.814, - 11.996, - 6.882, - 0.916, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.574, - 3.043, - 7.829, - 12.305, - 15.844, - 18.646, - 20.346, - 21.107, - 20.71, - 19.153, - 16.463, - 12.594, - 7.458, - 1.189, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.493, - 3.123, - 6.821, - 13.088, - 16.856, - 15.83, - 21.365, - 21.876, - 21.36, - 19.786, - 16.829, - 12.845, - 7.497, - 1.159, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.645, - 3.321, - 8.544, - 13.455, - 17.318, - 20.172, - 21.933, - 22.556, - 22.112, - 20.398, - 17.423, - 13.322, - 7.906, - 1.387, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.806, - 3.541, - 8.594, - 13.494, - 17.283, - 20.291, - 21.984, - 22.588, - 22.014, - 20.246, - 17.331, - 13.135, - 7.599, - 1.226, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.781, - 3.473, - 8.325, - 12.876, - 16.358, - 19.046, - 20.518, - 20.968, - 20.609, - 19.118, - 16.574, - 12.741, - 7.562, - 1.378, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.625, - 3.308, - 8.216, - 12.727, - 16.199, - 18.769, - 20.15, - 20.467, - 20.009, - 18.572, - 16.027, - 12.229, - 7.139, - 1.238, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.685, - 3.361, - 8.055, - 12.496, - 16.011, - 18.76, - 20.408, - 21.018, - 16.304, - 18.977, - 16.174, - 10.836, - 6.591, - 1.258, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.885, - 3.252, - 8.208, - 12.676, - 16.083, - 18.789, - 20.525, - 21.109, - 20.689, - 19.168, - 16.375, - 12.548, - 7.32, - 1.423, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.875, - 3.246, - 6.739, - 7.563, - 14.335, - 16.869, - 14.968, - 10.782, - 3.772, - 13.185, - 6.18, - 12.533, - 6.816, - 1.102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.768, - 3.249, - 7.927, - 12.695, - 15.979, - 18.538, - 20.417, - 19.333, - 14.989, - 16.315, - 14.757, - 9.25, - 4.97, - 0.853, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.672, - 3.093, - 6.631, - 6.507, - 13.036, - 15.504, - 17.901, - 18.174, - 17.667, - 9.206, - 8.506, - 6.644, - 3.054, - 1.15, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.723, - 3.409, - 8.022, - 12.39, - 15.864, - 18.283, - 19.259, - 19.103, - 18.443, - 17.328, - 15.162, - 11.542, - 7.11, - 1.6, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.667, - 3.247, - 7.97, - 12.326, - 15.818, - 18.492, - 20.223, - 20.977, - 20.621, - 19.076, - 16.367, - 12.695, - 7.696, - 1.937, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.626, - 2.056, - 5.09, - 4.123, - 5.043, - 15.982, - 14.164, - 21.274, - 21.184, - 15.436, - 16.823, - 12.552, - 7.239, - 1.17, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.752, - 3.431, - 8.438, - 13.226, - 17.059, - 19.892, - 21.719, - 22.406, - 21.966, - 20.249, - 17.387, - 13.334, - 8.038, - 2.013, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.653, - 3.628, - 9.072, - 14.115, - 18.118, - 21.043, - 22.868, - 23.526, - 22.862, - 21.129, - 18.182, - 14.284, - 8.947, - 2.54, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.583, - 3.653, - 9.248, - 14.386, - 18.304, - 21.139, - 22.598, - 21.951, - 22.467, - 20.708, - 17.811, - 13.881, - 8.72, - 2.572, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.566, - 3.508, - 8.709, - 13.537, - 16.978, - 19.392, - 20.784, - 21.0, - 20.185, - 18.311, - 15.851, - 12.685, - 8.107, - 2.301, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.621, - 3.426, - 8.458, - 13.101, - 16.531, - 18.858, - 20.104, - 20.416, - 20.053, - 18.844, - 16.465, - 12.956, - 8.132, - 2.29, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.589, - 3.311, - 8.188, - 12.799, - 16.432, - 19.242, - 21.056, - 21.83, - 21.543, - 19.994, - 17.255, - 13.528, - 8.494, - 2.457, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.587, - 3.572, - 8.494, - 13.56, - 16.699, - 19.458, - 21.935, - 22.625, - 22.123, - 20.505, - 17.614, - 13.747, - 8.592, - 2.465, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.708, - 3.48, - 8.659, - 13.44, - 17.123, - 19.921, - 21.667, - 22.327, - 21.831, - 20.147, - 17.298, - 13.533, - 8.447, - 2.437, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.643, - 3.462, - 8.516, - 13.099, - 16.318, - 18.43, - 19.333, - 19.625, - 19.687, - 18.789, - 16.452, - 12.996, - 8.014, - 2.215, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.677, - 3.375, - 8.188, - 12.471, - 16.048, - 18.753, - 20.465, - 21.18, - 20.81, - 19.298, - 16.394, - 12.846, - 7.447, - 1.257, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.635, - 3.323, - 8.3, - 13.031, - 16.72, - 19.503, - 21.26, - 21.965, - 21.546, - 19.953, - 17.188, - 13.498, - 8.454, - 2.463, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.729, - 3.422, - 8.353, - 12.971, - 16.408, - 18.745, - 19.968, - 20.375, - 20.113, - 18.921, - 16.539, - 13.046, - 8.153, - 2.289, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.703, - 3.383, - 8.346, - 12.956, - 16.277, - 18.421, - 19.664, - 20.098, - 19.897, - 18.776, - 16.361, - 12.91, - 8.085, - 2.325, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.854, - 3.492, - 8.133, - 12.487, - 15.849, - 18.39, - 20.108, - 20.845, - 20.506, - 18.85, - 16.421, - 12.933, - 8.089, - 2.371, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.703, - 3.354, - 8.081, - 12.541, - 15.928, - 18.391, - 19.834, - 20.509, - 20.305, - 18.912, - 16.422, - 12.792, - 8.065, - 2.375, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.658, - 3.3, - 8.194, - 12.705, - 16.263, - 18.91, - 20.63, - 21.307, - 20.916, - 19.398, - 16.809, - 13.142, - 8.324, - 2.549, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.586, - 3.179, - 8.06, - 12.553, - 15.96, - 18.598, - 20.3, - 21.038, - 20.727, - 19.264, - 16.704, - 13.143, - 8.396, - 2.619, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.561, - 3.157, - 7.986, - 12.432, - 15.791, - 17.931, - 19.896, - 20.814, - 20.562, - 19.186, - 16.127, - 12.572, - 8.169, - 2.159, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.652, - 3.053, - 7.158, - 11.283, - 15.736, - 18.308, - 19.694, - 20.394, - 17.898, - 17.076, - 14.288, - 9.437, - 7.282, - 2.167, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.659, - 3.114, - 7.342, - 11.581, - 14.992, - 18.81, - 19.896, - 20.086, - 20.633, - 19.703, - 17.049, - 13.482, - 8.596, - 2.658, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.636, - 3.061, - 7.57, - 11.63, - 14.99, - 17.523, - 19.178, - 19.814, - 19.416, - 11.481, - 7.237, - 12.009, - 7.6, - 2.234, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.617, - 3.081, - 7.65, - 12.073, - 15.498, - 18.158, - 19.863, - 20.64, - 20.325, - 18.895, - 16.318, - 12.791, - 8.068, - 2.441, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.652, - 3.214, - 8.16, - 12.891, - 16.699, - 19.617, - 21.451, - 22.141, - 21.71, - 20.129, - 17.391, - 13.62, - 8.723, - 2.79, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.702, - 3.28, - 8.357, - 13.048, - 16.365, - 18.587, - 20.073, - 20.825, - 20.706, - 19.54, - 17.07, - 13.535, - 8.658, - 2.748, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.543, - 3.047, - 7.963, - 12.427, - 15.657, - 18.277, - 20.113, - 21.006, - 20.818, - 19.498, - 16.948, - 13.598, - 8.889, - 2.995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.419, - 3.007, - 8.222, - 12.925, - 16.335, - 18.637, - 20.28, - 21.03, - 20.777, - 19.529, - 17.083, - 13.58, - 8.906, - 2.948, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.418, - 3.011, - 8.253, - 13.051, - 16.622, - 19.226, - 20.975, - 21.7, - 21.391, - 19.999, - 17.461, - 13.854, - 9.079, - 3.085, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.411, - 3.009, - 8.179, - 12.794, - 15.913, - 18.087, - 19.54, - 20.209, - 19.977, - 18.787, - 16.535, - 13.178, - 8.705, - 2.938, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.407, - 2.929, - 7.84, - 12.143, - 14.96, - 17.402, - 15.745, - 19.887, - 18.928, - 17.677, - 15.284, - 12.305, - 7.636, - 2.139, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.602, - 2.893, - 7.273, - 11.554, - 14.828, - 17.34, - 18.925, - 19.573, - 17.313, - 18.296, - 15.861, - 12.263, - 7.535, - 2.036, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.829, - 3.264, - 7.157, - 11.429, - 14.743, - 17.332, - 19.098, - 17.414, - 17.208, - 18.235, - 15.755, - 12.137, - 7.312, - 1.812, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.577, - 2.839, - 7.481, - 12.136, - 15.703, - 18.499, - 20.271, - 21.0, - 20.834, - 19.414, - 16.794, - 13.238, - 8.467, - 2.632, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.438, - 2.73, - 7.628, - 12.451, - 16.126, - 18.924, - 20.74, - 21.51, - 21.164, - 19.656, - 17.08, - 13.605, - 8.739, - 2.778, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.512, - 2.774, - 7.484, - 12.032, - 15.537, - 18.099, - 19.894, - 20.652, - 20.472, - 18.999, - 16.214, - 12.469, - 7.475, - 1.835, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.637, - 2.309, - 6.475, - 5.677, - 13.691, - 14.827, - 13.779, - 15.268, - 14.858, - 8.611, - 12.098, - 9.662, - 3.732, - 0.729, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.659, - 2.985, - 7.562, - 12.378, - 16.234, - 19.29, - 21.12, - 21.769, - 21.492, - 20.094, - 17.435, - 13.788, - 8.876, - 2.809, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.412, - 2.661, - 7.653, - 12.445, - 15.994, - 18.672, - 20.429, - 21.158, - 20.941, - 19.619, - 17.082, - 13.478, - 8.635, - 2.705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.37, - 2.539, - 7.543, - 12.263, - 15.673, - 18.216, - 19.989, - 20.677, - 20.433, - 19.079, - 16.551, - 12.988, - 8.233, - 2.444, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.176, - 2.082, - 6.247, - 9.453, - 12.066, - 8.931, - 11.634, - 11.92, - 13.993, - 17.329, - 15.111, - 12.32, - 7.556, - 1.974, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.24, - 2.456, - 6.886, - 11.327, - 14.722, - 17.497, - 19.221, - 19.966, - 19.607, - 18.319, - 15.774, - 12.096, - 7.415, - 1.947, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.412, - 2.379, - 7.006, - 11.678, - 15.242, - 17.996, - 19.791, - 20.535, - 20.307, - 18.932, - 16.451, - 12.894, - 8.116, - 2.301, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.354, - 2.39, - 7.304, - 12.087, - 15.632, - 18.332, - 20.123, - 20.855, - 20.514, - 19.123, - 16.609, - 12.982, - 8.156, - 2.268, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.338, - 2.363, - 7.333, - 12.189, - 15.857, - 18.638, - 20.495, - 21.228, - 20.917, - 19.434, - 16.784, - 13.15, - 8.347, - 2.423, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.319, - 2.295, - 7.197, - 12.017, - 15.679, - 18.592, - 20.494, - 21.299, - 21.049, - 19.664, - 17.09, - 13.489, - 8.646, - 2.534, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.316, - 2.248, - 7.224, - 12.021, - 15.695, - 18.575, - 20.425, - 21.198, - 20.978, - 19.469, - 16.823, - 13.305, - 8.399, - 2.42, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.339, - 2.269, - 7.011, - 11.845, - 15.462, - 18.255, - 20.044, - 20.705, - 20.504, - 19.02, - 16.392, - 12.717, - 7.846, - 1.994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.379, - 2.203, - 6.712, - 11.236, - 14.769, - 17.464, - 19.249, - 19.904, - 19.596, - 18.149, - 15.464, - 11.962, - 6.943, - 0.251, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.063, - 1.723, - 1.913, - 1.767, - 15.139, - 15.74, - 18.763, - 1.654, - 5.228, - 4.518, - 0.583, - 5.584, - 1.077, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.368, - 2.152, - 6.496, - 11.039, - 14.536, - 17.349, - 19.172, - 19.959, - 19.704, - 18.372, - 15.873, - 12.301, - 7.452, - 1.731, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.298, - 2.005, - 6.675, - 11.469, - 15.059, - 17.869, - 19.716, - 20.478, - 20.315, - 18.861, - 16.281, - 12.381, - 7.482, - 1.677, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.296, - 1.987, - 6.656, - 11.461, - 15.033, - 17.695, - 19.498, - 20.337, - 20.095, - 18.736, - 16.257, - 12.491, - 7.593, - 1.685, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.314, - 1.981, - 6.492, - 11.142, - 14.74, - 17.535, - 19.339, - 20.076, - 19.905, - 18.476, - 15.885, - 12.152, - 7.252, - 1.475, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.318, - 2.008, - 6.543, - 11.226, - 14.853, - 17.562, - 19.308, - 20.058, - 19.845, - 18.46, - 15.907, - 12.138, - 7.237, - 1.428, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.279, - 1.935, - 6.494, - 11.301, - 14.846, - 17.478, - 19.256, - 19.961, - 19.552, - 18.21, - 15.743, - 12.183, - 7.302, - 1.396, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.277, - 1.926, - 6.461, - 11.157, - 14.735, - 17.458, - 19.252, - 20.004, - 19.845, - 18.401, - 15.827, - 12.101, - 7.15, - 1.257, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.257, - 1.907, - 6.328, - 11.005, - 14.517, - 17.224, - 18.964, - 19.652, - 19.248, - 17.747, - 15.099, - 11.602, - 6.664, - 0.979, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.445, - 0.244, - 9.644, - 14.675, - 15.67, - 16.985, - 17.792, - 19.474, - 18.107, - 15.45, - 11.881, - 6.897, - 1.001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.257, - 1.905, - 6.239, - 10.913, - 14.484, - 17.263, - 19.174, - 19.985, - 19.684, - 18.345, - 15.729, - 12.158, - 7.157, - 1.105, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.203, - 1.72, - 6.325, - 11.132, - 14.61, - 17.301, - 18.962, - 19.73, - 19.553, - 18.2, - 15.646, - 11.937, - 6.908, - 0.953, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.21, - 1.856, - 6.212, - 10.95, - 14.518, - 17.207, - 19.022, - 19.712, - 15.386, - 17.93, - 15.242, - 11.522, - 6.406, - 0.706, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.217, - 2.192, - 6.299, - 10.989, - 14.74, - 17.707, - 19.651, - 20.537, - 20.145, - 18.696, - 15.943, - 12.301, - 7.041, - 0.876, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.202, - 1.768, - 6.584, - 11.867, - 15.821, - 18.91, - 20.842, - 21.554, - 21.234, - 19.621, - 16.745, - 12.821, - 7.433, - 1.013, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.137, - 1.578, - 6.425, - 11.605, - 15.446, - 18.308, - 20.25, - 21.053, - 20.682, - 19.136, - 16.377, - 12.56, - 7.246, - 0.888, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.136, - 1.561, - 6.437, - 11.529, - 15.271, - 17.986, - 19.94, - 20.833, - 20.571, - 19.104, - 16.408, - 12.695, - 7.357, - 0.958, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.121, - 1.494, - 6.328, - 11.422, - 15.243, - 18.133, - 20.093, - 20.986, - 20.639, - 19.165, - 16.382, - 12.605, - 7.244, - 0.889, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.106, - 1.441, - 6.226, - 11.253, - 15.072, - 17.961, - 19.911, - 20.796, - 20.479, - 19.015, - 16.298, - 12.479, - 7.121, - 0.68, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.124, - 1.434, - 6.109, - 11.295, - 15.277, - 18.23, - 20.158, - 20.883, - 20.6, - 19.014, - 16.215, - 12.381, - 6.986, - 0.645, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.109, - 1.389, - 5.86, - 10.811, - 14.555, - 17.336, - 19.103, - 19.814, - 19.508, - 17.914, - 15.229, - 11.621, - 6.468, - 0.471, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.108, - 1.342, - 5.741, - 10.667, - 14.278, - 17.035, - 18.871, - 19.646, - 19.429, - 17.978, - 15.34, - 11.554, - 6.347, - 0.412, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094, - 1.303, - 5.642, - 10.464, - 13.657, - 14.051, - 18.776, - 19.464, - 16.283, - 13.253, - 13.1, - 10.107, - 4.9, - 0.189, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08, - 1.549, - 5.577, - 10.353, - 14.068, - 16.756, - 18.54, - 19.283, - 18.949, - 17.499, - 14.697, - 10.384, - 5.073, - 0.045, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.069, - 1.455, - 5.527, - 10.24, - 13.871, - 16.369, - 18.108, - 18.828, - 18.483, - 17.007, - 14.179, - 10.037, - 4.841, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.106, - 1.391, - 5.428, - 10.185, - 13.891, - 16.755, - 18.569, - 19.365, - 19.073, - 17.573, - 14.769, - 10.773, - 5.425, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.106, - 1.214, - 5.514, - 10.419, - 14.278, - 17.178, - 19.061, - 19.876, - 19.514, - 17.957, - 15.255, - 11.334, - 5.887, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.124, - 1.52, - 5.628, - 10.789, - 13.452, - 17.64, - 17.972, - 20.261, - 19.901, - 18.266, - 15.438, - 11.488, - 5.972, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.093, - 1.097, - 5.703, - 10.824, - 14.647, - 17.418, - 19.302, - 20.126, - 19.673, - 18.114, - 15.285, - 11.29, - 5.753, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.074, - 1.054, - 5.498, - 10.591, - 14.403, - 17.132, - 18.851, - 19.55, - 19.177, - 17.585, - 14.837, - 10.79, - 5.183, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059, - 1.009, - 5.411, - 10.532, - 14.394, - 17.253, - 19.046, - 19.656, - 19.338, - 17.656, - 14.753, - 10.778, - 5.242, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.062, - 1.095, - 5.551, - 10.83, - 14.866, - 17.77, - 19.698, - 20.404, - 19.948, - 18.275, - 15.391, - 11.303, - 5.568, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.045, - 0.992, - 5.323, - 10.393, - 14.272, - 17.141, - 18.977, - 19.685, - 19.39, - 17.739, - 14.88, - 10.844, - 5.201, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026, - 1.04, - 5.034, - 9.903, - 13.85, - 16.73, - 18.593, - 19.372, - 16.448, - 14.874, - 12.077, - 9.902, - 4.458, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.295, - 5.069, - 9.274, - 12.54, - 16.311, - 16.017, - 15.713, - 16.058, - 4.71, - 2.912, - 8.371, - 3.999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.011, - 4.878, - 9.684, - 13.542, - 16.44, - 18.289, - 19.007, - 18.668, - 17.092, - 14.163, - 10.169, - 4.549, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.818, - 4.886, - 9.687, - 13.303, - 16.084, - 17.918, - 18.667, - 18.337, - 16.771, - 14.037, - 10.016, - 4.483, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.794, - 4.797, - 9.466, - 12.98, - 15.518, - 17.054, - 17.679, - 17.425, - 11.391, - 7.726, - 8.48, - 3.924, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.153, - 4.728, - 9.457, - 13.279, - 16.211, - 18.076, - 18.784, - 9.189, - 0.971, - 13.613, - 1.779, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.001, - 4.64, - 9.098, - 12.692, - 15.538, - 17.181, - 17.852, - 17.542, - 14.043, - 11.355, - 9.959, - 4.122, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.765, - 4.857, - 9.793, - 13.659, - 16.467, - 18.331, - 19.117, - 18.719, - 17.062, - 14.095, - 9.89, - 4.029, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.746, - 4.826, - 9.679, - 13.169, - 15.971, - 17.748, - 5.394, - 0.603, - 0.472, - 13.772, - 9.618, - 3.836, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.74, - 4.665, - 9.548, - 13.511, - 16.301, - 18.046, - 18.664, - 7.033, - 5.924, - 1.419, - 5.997, - 3.512, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.901, - 4.575, - 9.478, - 13.332, - 16.079, - 17.732, - 18.303, - 17.781, - 16.02, - 13.114, - 8.775, - 3.06, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.763, - 4.491, - 9.288, - 13.097, - 15.776, - 17.365, - 17.894, - 17.328, - 15.661, - 4.813, - 8.66, - 0.579, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.755, - 4.419, - 9.312, - 13.176, - 16.027, - 17.801, - 18.504, - 18.049, - 16.297, - 13.234, - 8.892, - 2.982, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.791, - 4.453, - 9.334, - 13.278, - 16.134, - 17.92, - 18.638, - 18.156, - 16.267, - 12.99, - 8.532, - 2.665, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.708, - 4.706, - 9.981, - 14.198, - 17.162, - 18.97, - 19.61, - 19.189, - 17.301, - 14.121, - 9.338, - 3.102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.769, - 4.777, - 10.114, - 14.391, - 17.361, - 19.231, - 19.773, - 19.176, - 17.273, - 14.054, - 9.407, - 3.102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.738, - 4.568, - 9.591, - 13.68, - 16.69, - 18.568, - 19.235, - 18.686, - 16.903, - 13.824, - 9.241, - 3.039, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.595, - 4.386, - 9.516, - 13.481, - 16.271, - 17.822, - 18.111, - 17.224, - 15.327, - 12.541, - 8.465, - 2.701, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.665, - 4.263, - 9.186, - 13.098, - 15.798, - 17.31, - 17.624, - 16.688, - 14.951, - 12.192, - 8.041, - 2.29, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.824, - 4.159, - 9.076, - 13.061, - 15.851, - 17.618, - 18.254, - 17.613, - 15.644, - 12.33, - 7.044, - 1.421, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.188, - 4.588, - 9.188, - 13.038, - 16.106, - 17.918, - 18.437, - 17.897, - 15.71, - 12.021, - 7.813, - 1.749, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.813, - 4.534, - 10.053, - 14.627, - 17.92, - 19.892, - 20.466, - 19.795, - 17.611, - 14.086, - 9.068, - 2.43, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.563, - 4.481, - 10.21, - 14.847, - 18.023, - 19.959, - 20.519, - 19.683, - 17.567, - 14.166, - 9.065, - 2.265, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.563, - 4.369, - 9.988, - 14.413, - 17.5, - 19.303, - 19.723, - 18.931, - 16.867, - 13.521, - 8.722, - 2.049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.535, - 4.16, - 9.487, - 13.629, - 16.393, - 17.991, - 18.385, - 17.554, - 15.781, - 12.769, - 8.137, - 1.579, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.72, - 4.108, - 9.266, - 13.568, - 16.743, - 18.611, - 19.268, - 18.58, - 16.612, - 13.117, - 8.088, - 1.312, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.547, - 4.082, - 9.581, - 13.861, - 16.711, - 18.317, - 18.64, - 17.748, - 15.779, - 12.549, - 7.914, - 1.297, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.487, - 3.878, - 9.123, - 13.391, - 16.327, - 18.151, - 18.713, - 17.894, - 15.818, - 12.383, - 7.403, - 0.988, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.973, - 4.123, - 8.85, - 13.038, - 16.559, - 18.539, - 19.19, - 18.464, - 16.441, - 13.05, - 7.928, - 1.112, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.482, - 3.92, - 9.567, - 14.14, - 17.236, - 19.082, - 19.559, - 18.729, - 16.56, - 13.006, - 7.76, - 0.995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.477, - 3.815, - 9.33, - 13.767, - 16.692, - 18.401, - 18.744, - 17.861, - 15.719, - 12.357, - 7.376, - 0.875, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.497, - 3.713, - 9.129, - 13.475, - 16.426, - 18.091, - 18.412, - 17.497, - 15.47, - 12.166, - 7.193, - 0.69, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.538, - 3.548, - 8.564, - 12.809, - 15.764, - 17.555, - 18.123, - 17.532, - 15.551, - 12.181, - 7.058, - 0.562, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.468, - 3.517, - 8.774, - 12.996, - 15.818, - 17.48, - 17.893, - 17.191, - 15.256, - 11.952, - 6.891, - 0.509, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.619, - 3.316, - 7.553, - 13.04, - 14.095, - 14.175, - 15.215, - 11.414, - 5.835, - 11.952, - 6.806, - 0.354, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.588, - 3.447, - 8.332, - 12.347, - 14.086, - 15.54, - 15.732, - 14.241, - 11.181, - 7.982, - 2.808, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.552, - 3.367, - 8.359, - 11.415, - 14.295, - 14.435, - 9.866, - 12.037, - 7.534, - 7.944, - 1.394, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.406, - 3.112, - 8.016, - 12.202, - 15.057, - 16.815, - 17.429, - 16.694, - 14.635, - 11.231, - 6.114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.769, - 3.127, - 7.974, - 12.206, - 15.046, - 16.789, - 17.376, - 16.65, - 14.568, - 11.165, - 6.033, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.457, - 3.087, - 8.133, - 12.518, - 15.511, - 17.261, - 17.864, - 17.017, - 14.805, - 11.163, - 5.823, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.613, - 3.268, - 8.436, - 12.972, - 16.077, - 17.87, - 18.367, - 17.517, - 11.463, - 7.906, - 0.352, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.622, - 1.555, - 5.402, - 13.13, - 9.192, - 18.02, - 18.5, - 4.209, - 6.04, - 11.742, - 0.093, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.475, - 3.179, - 8.735, - 13.447, - 16.463, - 18.264, - 2.896, - 6.471, - 0.388, - 0.598, - 3.025, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.413, - 3.124, - 8.494, - 13.19, - 16.123, - 17.788, - 18.09, - 17.068, - 14.841, - 11.06, - 5.503, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.43, - 2.964, - 8.189, - 12.747, - 15.674, - 17.261, - 17.6, - 16.678, - 14.532, - 11.011, - 5.449, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.386, - 2.863, - 8.077, - 12.509, - 15.117, - 16.466, - 16.747, - 15.902, - 13.883, - 10.56, - 5.252, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.407, - 2.777, - 7.784, - 12.278, - 13.152, - 14.341, - 17.103, - 16.077, - 13.779, - 10.082, - 4.753, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.368, - 2.668, - 7.712, - 12.233, - 14.994, - 16.536, - 16.87, - 15.925, - 13.781, - 10.197, - 4.73, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.36, - 2.536, - 7.678, - 12.197, - 15.044, - 16.699, - 17.09, - 16.155, - 13.885, - 10.233, - 4.812, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.361, - 2.539, - 7.612, - 11.986, - 14.643, - 15.998, - 16.075, - 15.096, - 13.192, - 9.851, - 4.6, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.32, - 2.44, - 7.271, - 10.096, - 12.851, - 15.607, - 14.286, - 12.487, - 13.282, - 8.417, - 4.073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.411, - 2.681, - 7.166, - 11.339, - 14.112, - 15.67, - 16.022, - 15.475, - 13.26, - 9.488, - 3.784, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.331, - 2.364, - 7.162, - 11.584, - 14.51, - 16.241, - 16.665, - 15.786, - 13.555, - 9.736, - 4.066, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.311, - 2.281, - 7.3, - 11.813, - 14.744, - 16.332, - 16.557, - 15.484, - 13.232, - 9.447, - 3.93, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.289, - 2.262, - 7.284, - 11.897, - 14.826, - 16.39, - 16.597, - 15.462, - 13.229, - 9.479, - 3.86, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.313, - 2.252, - 7.157, - 11.524, - 14.457, - 16.176, - 16.658, - 15.687, - 13.406, - 9.492, - 3.47, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.334, - 2.274, - 7.129, - 11.541, - 14.438, - 15.956, - 16.164, - 15.228, - 13.072, - 9.249, - 3.208, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.312, - 2.18, - 7.001, - 11.357, - 14.147, - 15.547, - 15.702, - 14.731, - 12.588, - 8.855, - 3.136, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.28, - 2.024, - 6.88, - 11.411, - 14.394, - 16.037, - 16.346, - 15.359, - 13.036, - 9.053, - 3.426, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.214, - 1.962, - 6.775, - 11.261, - 14.182, - 15.74, - 15.958, - 14.973, - 12.691, - 8.807, - 3.13, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.247, - 2.059, - 6.526, - 10.806, - 13.79, - 15.383, - 15.617, - 13.259, - 7.312, - 5.248, - 1.5, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.233, - 2.128, - 6.553, - 10.882, - 13.936, - 15.505, - 15.74, - 14.7, - 12.001, - 7.754, - 2.23, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.222, - 2.069, - 6.622, - 11.275, - 14.564, - 16.468, - 17.003, - 16.056, - 13.67, - 9.295, - 3.168, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.183, - 1.82, - 6.82, - 11.631, - 14.793, - 16.41, - 16.642, - 15.643, - 13.252, - 9.113, - 3.114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.168, - 1.803, - 6.723, - 11.505, - 14.63, - 16.209, - 16.416, - 15.225, - 12.787, - 8.652, - 2.824, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.17, - 1.702, - 6.454, - 11.054, - 14.151, - 15.717, - 15.991, - 14.928, - 12.536, - 8.39, - 2.594, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.135, - 1.58, - 6.265, - 10.822, - 13.762, - 15.256, - 15.45, - 10.438, - 11.008, - 6.52, - 2.401, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.121, - 1.505, - 6.123, - 8.593, - 13.301, - 14.898, - 15.278, - 14.395, - 12.195, - 8.089, - 0.868, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.111, - 1.472, - 6.093, - 10.785, - 12.562, - 10.557, - 8.411, - 14.887, - 9.297, - 7.386, - 1.712, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.179, - 1.506, - 6.017, - 10.54, - 13.771, - 15.338, - 15.607, - 14.734, - 12.395, - 8.181, - 2.167, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.142, - 1.336, - 6.163, - 11.013, - 14.4, - 16.15, - 16.417, - 15.313, - 12.699, - 8.309, - 2.045, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.141, - 1.287, - 5.928, - 10.61, - 13.878, - 15.557, - 15.833, - 14.746, - 12.27, - 7.838, - 1.754, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.102, - 1.2, - 5.552, - 10.171, - 13.398, - 15.098, - 15.38, - 14.352, - 11.872, - 7.655, - 1.627, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.1, - 1.192, - 5.463, - 9.989, - 13.084, - 14.6, - 14.84, - 13.821, - 11.551, - 7.531, - 1.552, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.065, - 1.098, - 5.31, - 9.761, - 12.764, - 14.369, - 14.708, - 13.77, - 11.458, - 7.348, - 1.466, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.118, - 1.097, - 5.239, - 9.699, - 12.782, - 14.311, - 14.504, - 13.489, - 11.117, - 6.982, - 1.239, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.048, - 1.058, - 5.113, - 9.334, - 12.293, - 14.013, - 11.369, - 13.571, - 11.24, - 7.031, - 1.249, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.991, - 5.151, - 9.727, - 13.067, - 14.741, - 15.09, - 14.026, - 11.551, - 7.148, - 1.165, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.426, - 5.125, - 9.344, - 12.694, - 14.345, - 14.673, - 10.178, - 10.766, - 6.377, - 0.096, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.354, - 4.257, - 9.266, - 12.606, - 14.296, - 14.652, - 13.697, - 11.265, - 6.974, - 1.145, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.414, - 4.228, - 9.115, - 12.36, - 12.066, - 11.27, - 9.55, - 8.293, - 4.602, - 0.094, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.703, - 4.76, - 7.068, - 12.597, - 14.373, - 14.796, - 13.834, - 11.338, - 6.902, - 0.414, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.977, - 4.69, - 9.164, - 12.483, - 14.209, - 14.572, - 13.541, - 11.019, - 6.674, - 0.883, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.804, - 4.882, - 9.83, - 13.423, - 15.217, - 15.523, - 14.472, - 11.874, - 7.243, - 1.037, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.775, - 4.611, - 9.296, - 12.773, - 14.529, - 14.88, - 13.781, - 11.262, - 5.69, - 0.257, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.241, - 3.94, - 9.123, - 10.222, - 12.105, - 8.463, - 6.546, - 3.106, - 5.548, - 0.219, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.706, - 3.666, - 8.615, - 9.429, - 10.587, - 4.992, - 13.362, - 10.813, - 6.42, - 0.63, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.677, - 4.259, - 8.734, - 12.135, - 11.94, - 10.773, - 9.796, - 5.035, - 1.991, - 0.032, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.629, - 4.179, - 8.69, - 12.064, - 13.803, - 14.112, - 13.074, - 10.561, - 6.274, - 0.642, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.101, - 3.672, - 6.884, - 11.654, - 13.541, - 13.947, - 13.023, - 10.51, - 4.382, - 0.22, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.553, - 4.089, - 8.824, - 12.437, - 14.38, - 14.769, - 13.728, - 11.075, - 6.625, - 0.241, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.027, - 3.974, - 8.603, - 12.067, - 14.006, - 14.454, - 13.528, - 11.003, - 6.614, - 0.705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.005, - 3.926, - 8.391, - 11.687, - 13.608, - 14.052, - 13.091, - 10.524, - 6.307, - 0.657, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.908, - 3.724, - 8.181, - 11.471, - 13.114, - 13.431, - 12.646, - 10.251, - 6.229, - 0.693, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.915, - 3.314, - 6.466, - 9.691, - 10.496, - 10.391, - 12.058, - 9.914, - 5.922, - 0.522, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.889, - 3.232, - 7.967, - 11.418, - 13.435, - 13.909, - 13.096, - 10.551, - 6.356, - 0.67, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.52, - 3.551, - 7.944, - 11.419, - 13.43, - 13.871, - 12.987, - 10.381, - 2.878, - 0.03, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.443, - 2.876, - 4.849, - 0.354, - 1.992, - 0.751, - 0.942, - 2.574, - 1.65, - 0.543, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.554, - 3.381, - 6.793, - 9.543, - 10.257, - 11.143, - 8.451, - 3.824, - 0.593, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.854, - 2.342, - 2.337, - 3.643, - 8.76, - 8.732, - 10.009, - 7.794, - 5.709, - 0.241, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.557, - 0.145, - 7.728, - 7.342, - 9.138, - 10.195, - 5.521, - 0.164, - 6.093, - 0.142, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.48, - 3.32, - 7.935, - 11.682, - 13.876, - 14.39, - 13.502, - 10.83, - 6.286, - 0.162, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.47, - 3.17, - 7.579, - 11.132, - 13.232, - 11.375, - 12.873, - 7.425, - 4.595, - 0.449, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.437, - 3.079, - 7.605, - 11.165, - 13.297, - 13.787, - 9.367, - 10.283, - 6.038, - 0.485, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.411, - 3.036, - 7.642, - 11.385, - 13.593, - 14.08, - 13.195, - 10.555, - 6.145, - 0.496, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.49, - 3.095, - 7.721, - 10.412, - 11.919, - 13.988, - 10.748, - 10.481, - 6.267, - 0.556, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.475, - 2.981, - 7.414, - 11.128, - 13.392, - 14.092, - 5.793, - 4.005, - 6.107, - 0.484, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.502, - 2.994, - 6.4, - 7.555, - 13.228, - 0.801, - 5.287, - 2.176, - 3.272, - 0.36, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.415, - 2.886, - 7.502, - 11.257, - 13.597, - 14.182, - 13.254, - 10.638, - 6.314, - 0.574, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.372, - 2.766, - 7.414, - 11.238, - 13.517, - 14.064, - 13.199, - 10.6, - 6.303, - 0.615, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.417, - 2.642, - 7.145, - 10.707, - 12.731, - 13.351, - 12.591, - 10.189, - 6.081, - 0.566, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.458, - 2.669, - 7.102, - 8.705, - 9.881, - 9.776, - 2.218, - 7.864, - 6.198, - 0.2, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.401, - 2.659, - 7.286, - 11.197, - 13.609, - 14.296, - 13.513, - 10.936, - 6.591, - 0.797, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.352, - 2.586, - 7.15, - 10.886, - 13.129, - 13.713, - 12.934, - 10.497, - 6.375, - 0.233, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.439, - 1.949, - 6.876, - 8.98, - 10.403, - 13.54, - 11.709, - 10.438, - 6.297, - 0.767, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.376, - 2.557, - 7.09, - 10.814, - 13.056, - 13.666, - 12.866, - 10.478, - 6.403, - 0.756, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.372, - 2.487, - 6.886, - 10.409, - 12.436, - 13.149, - 12.439, - 10.102, - 6.096, - 0.614, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.507, - 2.446, - 5.095, - 9.256, - 12.797, - 11.032, - 13.187, - 10.791, - 6.558, - 0.635, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.376, - 2.419, - 6.796, - 10.496, - 10.211, - 13.576, - 12.843, - 10.421, - 6.308, - 0.778, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.356, - 2.382, - 6.789, - 10.469, - 12.75, - 13.427, - 8.013, - 8.719, - 2.638, - 0.105, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.311, - 2.301, - 6.637, - 10.413, - 12.734, - 13.434, - 12.775, - 9.332, - 6.309, - 0.359, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.306, - 2.319, - 7.011, - 10.981, - 13.37, - 11.537, - 9.378, - 7.642, - 3.299, - 0.181, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.308, - 2.287, - 6.929, - 10.787, - 11.146, - 12.41, - 13.238, - 10.903, - 6.899, - 1.16, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.281, - 2.17, - 6.615, - 8.633, - 10.351, - 10.293, - 9.033, - 6.916, - 3.347, - 0.195, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.456, - 2.167, - 3.647, - 6.588, - 9.624, - 11.181, - 8.516, - 4.996, - 6.492, - 0.482, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.24, - 2.23, - 5.558, - 6.605, - 4.181, - 3.942, - 1.209, - 2.744, - 2.219, - 0.117, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.428, - 0.21, - 3.639, - 2.308, - 3.387, - 1.377, - 3.014, - 8.037, - 1.641, - 0.99, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.346, - 1.164, - 4.272, - 1.481, - 4.055, - 4.134, - 3.569, - 2.565, - 2.221, - 0.151, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.343, - 2.189, - 6.472, - 10.372, - 12.8, - 10.716, - 9.662, - 10.852, - 5.067, - 1.576, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "size_kw": 30.0, - "lifecycle_om_cost_after_tax_bau": 4692.0, - "name": "roof_west", - "annual_energy_produced_kwh": 45938.58, - "year_one_energy_produced_kwh_bau": 48062.0, - "year_one_energy_produced_kwh": 48062.0, - "annual_energy_exported_kwh": 0.0, - "electric_to_storage_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "electric_curtailed_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "lifecycle_om_cost_after_tax": 4692.0, - "lcoe_per_kwh": 0.0 - }, - { - "electric_to_grid_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "production_factor_series": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022978000000000002, - 0.27288999999999997, - 0.445854, - 0.5465420000000001, - 0.591682, - 0.583673, - 0.5242279999999999, - 0.411019, - 0.236401, - 0.034754, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022653, - 0.276824, - 0.45223599999999997, - 0.5536369999999999, - 0.5995119999999999, - 0.592028, - 0.528977, - 0.416471, - 0.241361, - 0.008482, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022562000000000002, - 0.145619, - 0.4562, - 0.564461, - 0.6166470000000001, - 0.6099439999999999, - 0.5502720000000001, - 0.434185, - 0.254059, - 0.039703, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06387, - 0.280279, - 0.45767, - 0.5616319999999999, - 0.60687, - 0.599073, - 0.539341, - 0.425978, - 0.250363, - 0.039555, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022278, - 0.270249, - 0.443043, - 0.544181, - 0.589649, - 0.582188, - 0.430776, - 0.289503, - 0.24606299999999998, - 0.023436, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024863, - 0.26920299999999997, - 0.433961, - 0.385355, - 0.38497000000000003, - 0.45489999999999997, - 0.5196219999999999, - 0.414036, - 0.247006, - 0.042544, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.058472, - 0.260633, - 0.426284, - 0.527544, - 0.576386, - 0.573664, - 0.52089, - 0.413633, - 0.245071, - 0.044734, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.061723999999999994, - 0.275969, - 0.457096, - 0.567693, - 0.62141, - 0.616001, - 0.556507, - 0.445408, - 0.265272, - 0.052107, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021593, - 0.150088, - 0.449024, - 0.550481, - 0.59936, - 0.594076, - 0.5386559999999999, - 0.43105099999999996, - 0.260469, - 0.054509999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028431, - 0.269183, - 0.441416, - 0.465824, - 0.44329700000000005, - 0.5058670000000001, - 0.363678, - 0.324168, - 0.17225, - 0.024745, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005305, - 0.030978000000000002, - 0.16019, - 0.509293, - 0.5676509999999999, - 0.45764, - 0.415178, - 0.41879, - 0.231256, - 0.056825, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.056552, - 0.262899, - 0.437574, - 0.543254, - 0.594781, - 0.590759, - 0.533532, - 0.42827499999999996, - 0.26207400000000003, - 0.061966, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.058335, - 0.264675, - 0.434864, - 0.5330560000000001, - 0.58327, - 0.582414, - 0.531679, - 0.42980900000000005, - 0.26372500000000004, - 0.062804, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.062623, - 0.27475499999999997, - 0.450786, - 0.554461, - 0.508286, - 0.445257, - 0.39775099999999997, - 0.372865, - 0.218964, - 0.070658, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031313, - 0.256684, - 0.419742, - 0.399716, - 0.471709, - 0.308034, - 0.522432, - 0.199423, - 0.030479, - 0.019586, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.055816000000000004, - 0.253767, - 0.42849200000000004, - 0.5381670000000001, - 0.593552, - 0.5936520000000001, - 0.542314, - 0.43771899999999997, - 0.27098099999999997, - 0.07117, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.058152999999999996, - 0.255591, - 0.421735, - 0.5235449999999999, - 0.577455, - 0.467109, - 0.530111, - 0.430957, - 0.268392, - 0.073744, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.046487, - 0.202721, - 0.268911, - 0.43532499999999996, - 0.481805, - 0.469433, - 0.325589, - 0.286048, - 0.133246, - 0.020788, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.050829, - 0.046491, - 0.174156, - 0.276293, - 0.26412599999999997, - 0.5861580000000001, - 0.5381079999999999, - 0.27710199999999996, - 0.197701, - 0.020732, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0598, - 0.263193, - 0.442423, - 0.5485119999999999, - 0.605111, - 0.280431, - 0.063109, - 0.089338, - 0.009399, - 0.013535, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027816, - 0.137937, - 0.343021, - 0.447851, - 0.47796, - 0.489751, - 0.381742, - 0.287661, - 0.236998, - 0.08838700000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067565, - 0.275725, - 0.442669, - 0.544751, - 0.602113, - 0.604465, - 0.5524640000000001, - 0.451336, - 0.291688, - 0.089422, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.064446, - 0.264971, - 0.434603, - 0.392749, - 0.482927, - 0.436721, - 0.400306, - 0.351462, - 0.207393, - 0.039549, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019105, - 0.131615, - 0.167436, - 0.24829900000000002, - 0.253054, - 0.266384, - 0.223674, - 0.087664, - 0.046837000000000004, - 0.018527000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0581, - 0.152072, - 0.107938, - 0.17790199999999998, - 0.005713, - 0.580141, - 0.474704, - 0.306535, - 0.09817000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.063698, - 0.17949, - 0.350516, - 0.027392, - 0.47311200000000003, - 0.467771, - 0.382824, - 0.013779999999999999, - 0.293421, - 0.09096299999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.074492, - 0.298854, - 0.489619, - 0.608819, - 0.665207, - 0.6645549999999999, - 0.6121449999999999, - 0.5077889999999999, - 0.33481299999999997, - 0.113911, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08497199999999999, - 0.308612, - 0.492224, - 0.60342, - 0.659079, - 0.658919, - 0.604468, - 0.497025, - 0.329534, - 0.115649, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.084618, - 0.304865, - 0.47912400000000005, - 0.581071, - 0.629161, - 0.625871, - 0.453515, - 0.409361, - 0.20354499999999998, - 0.054633, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036031, - 0.29087, - 0.46480099999999996, - 0.47569900000000004, - 0.519653, - 0.514759, - 0.458504, - 0.379313, - 0.24978, - 0.06993200000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026926, - 0.23562799999999998, - 0.3708, - 0.657019, - 0.661883, - 0.610007, - 0.503558, - 0.336935, - 0.108598, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.070821, - 0.27416199999999996, - 0.448975, - 0.552966, - 0.6066159999999999, - 0.615607, - 0.57377, - 0.481856, - 0.32558499999999996, - 0.11618600000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.090217, - 0.315563, - 0.49589, - 0.507509, - 0.5411180000000001, - 0.513334, - 0.601509, - 0.497702, - 0.340918, - 0.132905, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096163, - 0.318058, - 0.492362, - 0.597247, - 0.6501760000000001, - 0.648783, - 0.596201, - 0.497319, - 0.341725, - 0.135519, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.092016, - 0.30680799999999997, - 0.479341, - 0.5877140000000001, - 0.640606, - 0.640903, - 0.588313, - 0.489339, - 0.33548300000000003, - 0.13215100000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034573, - 0.17678, - 0.308187, - 0.468813, - 0.514845, - 0.479311, - 0.406145, - 0.37342200000000003, - 0.22059, - 0.06787, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.093773, - 0.303268, - 0.46372800000000003, - 0.571534, - 0.630091, - 0.637439, - 0.503395, - 0.408197, - 0.28252, - 0.098532, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.061799999999999994, - 0.23228100000000002, - 0.36229700000000004, - 0.453062, - 0.547335, - 0.45193, - 0.418584, - 0.324337, - 0.265775, - 0.094868, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.056404, - 0.160153, - 0.310853, - 0.335241, - 0.28818299999999997, - 0.453737, - 0.466209, - 0.28936900000000004, - 0.229859, - 0.068694, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.090783, - 0.22418700000000003, - 0.358185, - 0.39674200000000004, - 0.49299, - 0.16425399999999998, - 0.181268, - 0.105452, - 0.08718600000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024269, - 0.15756299999999998, - 0.089691, - 0.192675, - 0.44923599999999997, - 0.41883, - 0.45, - 0.37295, - 0.27366500000000005, - 0.05136, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.311707, - 0.48760899999999996, - 0.600097, - 0.66269, - 0.669376, - 0.6187290000000001, - 0.520137, - 0.36028899999999997, - 0.148734, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10135, - 0.309293, - 0.33135000000000003, - 0.59323, - 0.6552250000000001, - 0.6597540000000001, - 0.6183529999999999, - 0.5171749999999999, - 0.358772, - 0.015945, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.110244, - 0.328564, - 0.504842, - 0.299254, - 0.673755, - 0.679768, - 0.633096, - 0.532873, - 0.299978, - 0.157957, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.118618, - 0.341825, - 0.5177039999999999, - 0.633687, - 0.694293, - 0.696429, - 0.645895, - 0.541791, - 0.38344799999999996, - 0.16831800000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.055966, - 0.347346, - 0.5123540000000001, - 0.614775, - 0.668671, - 0.66964, - 0.6170990000000001, - 0.517404, - 0.365716, - 0.1628, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.122723, - 0.33569, - 0.502521, - 0.609291, - 0.6653830000000001, - 0.6698500000000001, - 0.621625, - 0.521982, - 0.369787, - 0.162665, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.123127, - 0.338734, - 0.507713, - 0.617544, - 0.6720119999999999, - 0.671558, - 0.6212880000000001, - 0.5191180000000001, - 0.31151100000000004, - 0.053357, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052573, - 0.227932, - 0.30947800000000003, - 0.40543799999999997, - 0.355527, - 0.22976, - 0.418706, - 0.401428, - 0.290085, - 0.125098, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030052, - 0.023899999999999998, - 0.031553, - 0.10711, - 0.527266, - 0.441151, - 0.5294500000000001, - 0.379682, - 0.17224, - 0.003104, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.13495400000000002, - 0.349676, - 0.510934, - 0.615754, - 0.672307, - 0.6774249999999999, - 0.632533, - 0.5383150000000001, - 0.385633, - 0.179666, - 0.003904, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.133584, - 0.34202899999999997, - 0.494431, - 0.595623, - 0.6588440000000001, - 0.670895, - 0.6317269999999999, - 0.5395890000000001, - 0.39056, - 0.183342, - 0.0050279999999999995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.135927, - 0.138305, - 0.141706, - 0.100103, - 0.45676, - 0.537517, - 0.490485, - 0.379, - 0.282707, - 0.124977, - 0.002519, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.157182, - 0.39447699999999997, - 0.571219, - 0.6866, - 0.7496090000000001, - 0.7556, - 0.70663, - 0.600432, - 0.43700900000000004, - 0.206917, - 0.008874, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.159547, - 0.387934, - 0.553624, - 0.657882, - 0.699131, - 0.6884629999999999, - 0.631644, - 0.542259, - 0.405862, - 0.19830099999999998, - 0.00926, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.15486000000000003, - 0.374213, - 0.543337, - 0.658105, - 0.717752, - 0.721236, - 0.5200309999999999, - 0.118714, - 0.03814, - 0.060388, - 0.008919999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.15516999999999997, - 0.374505, - 0.5353519999999999, - 0.6456989999999999, - 0.705025, - 0.7106079999999999, - 0.662566, - 0.56483, - 0.413461, - 0.198819, - 0.010156, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005118, - 0.396708, - 0.572284, - 0.556077, - 0.577016, - 0.75547, - 0.704306, - 0.597847, - 0.048753, - 0.057662, - 0.003065, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.177535, - 0.412158, - 0.58366, - 0.6958, - 0.756462, - 0.760168, - 0.71075, - 0.605949, - 0.44654000000000005, - 0.008179, - 0.010734, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030795000000000003, - 0.259217, - 0.23462, - 0.322512, - 0.461189, - 0.080301, - 0.445406, - 0.286831, - 0.092908, - 0.113111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.069318, - 0.24738200000000002, - 0.325633, - 0.41318900000000003, - 0.517983, - 0.44802800000000004, - 0.41850099999999996, - 0.295938, - 0.202648, - 0.088953, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0012909999999999998, - 0.09683499999999999, - 0.251491, - 0.398411, - 0.5504049999999999, - 0.5691219999999999, - 0.543, - 0.6053160000000001, - 0.452526, - 0.269584, - 0.111288, - 0.005171, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006144, - 0.177758, - 0.39155, - 0.402166, - 0.531193, - 0.569882, - 0.589491, - 0.455673, - 0.395069, - 0.406826, - 0.203746, - 0.016051, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007905, - 0.184586, - 0.394318, - 0.534432, - 0.632212, - 0.476845, - 0.690689, - 0.648095, - 0.462375, - 0.40652699999999997, - 0.117973, - 0.016797, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003424, - 0.104625, - 0.250387, - 0.33493, - 0.638423, - 0.690736, - 0.564935, - 0.656146, - 0.556631, - 0.407584, - 0.20638399999999998, - 0.018708, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009958, - 0.19759800000000002, - 0.419371, - 0.576944, - 0.565112, - 0.599621, - 0.5453640000000001, - 0.5308630000000001, - 0.492223, - 0.345253, - 0.221903, - 0.008977, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012955, - 0.21387299999999998, - 0.43934300000000004, - 0.599375, - 0.70153, - 0.7471939999999999, - 0.740663, - 0.6875330000000001, - 0.5877169999999999, - 0.436877, - 0.182532, - 0.018968, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008298, - 0.163119, - 0.421695, - 0.572865, - 0.6701459999999999, - 0.708371, - 0.6888529999999999, - 0.6266649999999999, - 0.544385, - 0.32863, - 0.175871, - 0.02361, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015291, - 0.209602, - 0.32827100000000003, - 0.571808, - 0.673644, - 0.722773, - 0.7194940000000001, - 0.671988, - 0.570326, - 0.42275, - 0.218978, - 0.027053, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017005, - 0.14236000000000001, - 0.30988600000000005, - 0.5986480000000001, - 0.581332, - 0.571936, - 0.620871, - 0.520115, - 0.453101, - 0.295776, - 0.171549, - 0.022775, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020716000000000002, - 0.222038, - 0.440744, - 0.597726, - 0.702284, - 0.7506849999999999, - 0.746171, - 0.6891889999999999, - 0.586337, - 0.435887, - 0.22781200000000001, - 0.031432, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023548, - 0.222624, - 0.436303, - 0.5883160000000001, - 0.691258, - 0.741501, - 0.743193, - 0.691493, - 0.588292, - 0.439447, - 0.232567, - 0.033536, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028154, - 0.23184200000000002, - 0.441818, - 0.5843440000000001, - 0.67253, - 0.7170230000000001, - 0.715776, - 0.6719360000000001, - 0.579322, - 0.434553, - 0.23178200000000002, - 0.034383000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03032, - 0.234348, - 0.45109699999999997, - 0.602428, - 0.706098, - 0.752413, - 0.744544, - 0.692391, - 0.5860789999999999, - 0.436076, - 0.232815, - 0.035353, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.032142000000000004, - 0.226786, - 0.429745, - 0.559917, - 0.650331, - 0.685116, - 0.699664, - 0.663322, - 0.5753659999999999, - 0.43664400000000003, - 0.23805500000000002, - 0.037380000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03741, - 0.249372, - 0.465603, - 0.6171760000000001, - 0.721192, - 0.772442, - 0.7699969999999999, - 0.71634, - 0.6148429999999999, - 0.41246499999999997, - 0.184438, - 0.032187, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041436999999999995, - 0.258249, - 0.479285, - 0.633405, - 0.7324039999999999, - 0.77564, - 0.764101, - 0.7046720000000001, - 0.60539, - 0.45637900000000003, - 0.251317, - 0.042522, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043442, - 0.261204, - 0.479028, - 0.628995, - 0.727423, - 0.7704249999999999, - 0.7588680000000001, - 0.695432, - 0.590086, - 0.44477, - 0.247013, - 0.043025, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023710000000000002, - 0.156916, - 0.290146, - 0.552496, - 0.615418, - 0.594812, - 0.589144, - 0.557578, - 0.423031, - 0.437151, - 0.241738, - 0.042901, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.046208, - 0.248043, - 0.44692200000000004, - 0.588581, - 0.682535, - 0.731596, - 0.732162, - 0.685685, - 0.585053, - 0.43715699999999996, - 0.236922, - 0.042259, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.048606, - 0.244159, - 0.438972, - 0.571936, - 0.645571, - 0.6850890000000001, - 0.701557, - 0.670985, - 0.583451, - 0.44072100000000003, - 0.24191300000000002, - 0.044289, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052875, - 0.254266, - 0.3458, - 0.449639, - 0.6412279999999999, - 0.609991, - 0.596832, - 0.537481, - 0.495557, - 0.42534500000000003, - 0.179044, - 0.035669, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.05232, - 0.24854099999999998, - 0.341986, - 0.518261, - 0.686274, - 0.725561, - 0.714306, - 0.659125, - 0.420927, - 0.37704899999999997, - 0.185391, - 0.044886, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.055176, - 0.25230199999999997, - 0.44215, - 0.581354, - 0.693191, - 0.745133, - 0.746006, - 0.613351, - 0.5890650000000001, - 0.444975, - 0.24378, - 0.047523, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.062491, - 0.274924, - 0.48180900000000004, - 0.633382, - 0.737687, - 0.7884629999999999, - 0.188622, - 0.456774, - 0.45382, - 0.29539, - 0.114509, - 0.050733, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.064452, - 0.27839800000000003, - 0.481527, - 0.625073, - 0.7130850000000001, - 0.7543540000000001, - 0.759017, - 0.709175, - 0.607936, - 0.457104, - 0.12157899999999999, - 0.051923000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06675, - 0.27018000000000003, - 0.45982799999999996, - 0.5907340000000001, - 0.6726, - 0.626512, - 0.625633, - 0.57292, - 0.52491, - 0.426621, - 0.238881, - 0.051368000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06825400000000001, - 0.166576, - 0.337752, - 0.585789, - 0.692699, - 0.7125969999999999, - 0.5616319999999999, - 0.5876269999999999, - 0.5863590000000001, - 0.410388, - 0.17171899999999998, - 0.037293, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08026699999999999, - 0.311736, - 0.519514, - 0.66683, - 0.763806, - 0.8092659999999999, - 0.80059, - 0.740795, - 0.636042, - 0.481125, - 0.272969, - 0.05887, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.078956, - 0.29339, - 0.49027699999999996, - 0.6343759999999999, - 0.734832, - 0.7843730000000001, - 0.782467, - 0.735336, - 0.631993, - 0.477341, - 0.004889999999999999, - 0.0024980000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08752800000000001, - 0.32083999999999996, - 0.531154, - 0.680622, - 0.780645, - 0.8288110000000001, - 0.818589, - 0.760168, - 0.648649, - 0.491788, - 0.278853, - 0.062253, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.089488, - 0.315118, - 0.513361, - 0.654596, - 0.742654, - 0.778299, - 0.7636989999999999, - 0.593854, - 0.6107809999999999, - 0.46488, - 0.268236, - 0.062068, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08800100000000001, - 0.296363, - 0.401084, - 0.490665, - 0.657942, - 0.707991, - 0.720861, - 0.683225, - 0.594764, - 0.452683, - 0.26132, - 0.061418999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09269, - 0.30482299999999996, - 0.339094, - 0.5310940000000001, - 0.7175549999999999, - 0.768336, - 0.7704589999999999, - 0.721499, - 0.622015, - 0.474979, - 0.27276100000000003, - 0.065489, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.099105, - 0.324137, - 0.527339, - 0.6756449999999999, - 0.768229, - 0.813423, - 0.8105209999999999, - 0.754867, - 0.647179, - 0.30854899999999996, - 0.2767, - 0.06858, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.105159, - 0.33068200000000003, - 0.532682, - 0.6793899999999999, - 0.778357, - 0.817264, - 0.807366, - 0.746788, - 0.638291, - 0.48389499999999996, - 0.277932, - 0.070545, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10826300000000001, - 0.33305599999999996, - 0.526687, - 0.664145, - 0.7474729999999999, - 0.7780739999999999, - 0.7610030000000001, - 0.705448, - 0.611265, - 0.473163, - 0.277534, - 0.070842, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07944, - 0.31741800000000003, - 0.495967, - 0.629851, - 0.720111, - 0.7658769999999999, - 0.761985, - 0.7114, - 0.609758, - 0.46101400000000003, - 0.271666, - 0.069745, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.109413, - 0.320778, - 0.500403, - 0.637115, - 0.7269450000000001, - 0.7744460000000001, - 0.775124, - 0.726168, - 0.621904, - 0.46916800000000003, - 0.247685, - 0.06397, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.116779, - 0.33581599999999995, - 0.5215660000000001, - 0.657805, - 0.753876, - 0.800246, - 0.799304, - 0.743024, - 0.638557, - 0.487832, - 0.287506, - 0.074242, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00039600000000000003, - 0.33508499999999997, - 0.315492, - 0.6711609999999999, - 0.15106299999999998, - 0.433596, - 0.8086810000000001, - 0.751201, - 0.5493049999999999, - 0.339786, - 0.061509, - 0.0025710000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.120556, - 0.33857, - 0.315758, - 0.669653, - 0.7632279999999999, - 0.8055739999999999, - 0.679415, - 0.735764, - 0.375935, - 0.190462, - 0.16362200000000002, - 0.036721, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00040100000000000004, - 0.33282, - 0.5311130000000001, - 0.16630899999999998, - 0.020974, - 0.067363, - 0.031985, - 0.12269100000000001, - 0.12139, - 0.221413, - 0.079731, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.085728, - 0.36663, - 0.56172, - 0.7031459999999999, - 0.788147, - 0.827765, - 0.814667, - 0.752943, - 0.645499, - 0.496529, - 0.294537, - 0.07916500000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0019850000000000002, - 0.12825299999999998, - 0.344555, - 0.521257, - 0.642079, - 0.704152, - 0.726666, - 0.734059, - 0.6994049999999999, - 0.6122089999999999, - 0.475781, - 0.282342, - 0.078566, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0024860000000000004, - 0.129666, - 0.341979, - 0.514204, - 0.637827, - 0.714459, - 0.7427659999999999, - 0.725581, - 0.682313, - 0.5966330000000001, - 0.462808, - 0.278949, - 0.078737, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002931, - 0.130802, - 0.341043, - 0.5051410000000001, - 0.61624, - 0.680727, - 0.714862, - 0.7262430000000001, - 0.693217, - 0.604402, - 0.466887, - 0.28166399999999997, - 0.078515, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005351, - 0.103737, - 0.340779, - 0.512291, - 0.533926, - 0.603131, - 0.750169, - 0.741364, - 0.6948049999999999, - 0.6015539999999999, - 0.464293, - 0.222612, - 0.07900700000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0048200000000000005, - 0.136212, - 0.348911, - 0.52075, - 0.638338, - 0.7057749999999999, - 0.728272, - 0.7036359999999999, - 0.64238, - 0.555282, - 0.433651, - 0.25991000000000003, - 0.077809, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0039169999999999995, - 0.132902, - 0.327289, - 0.49943099999999996, - 0.623662, - 0.714466, - 0.7379819999999999, - 0.7120019999999999, - 0.645931, - 0.547905, - 0.434427, - 0.269776, - 0.078567, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004395, - 0.140253, - 0.346389, - 0.506982, - 0.620054, - 0.6866369999999999, - 0.7093189999999999, - 0.700067, - 0.657883, - 0.5763400000000001, - 0.449305, - 0.276812, - 0.08149200000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0044800000000000005, - 0.14174799999999999, - 0.340475, - 0.49417500000000003, - 0.6169669999999999, - 0.705382, - 0.744146, - 0.741552, - 0.6948869999999999, - 0.6003229999999999, - 0.46051299999999995, - 0.284065, - 0.084875, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005914, - 0.14931999999999998, - 0.358197, - 0.526503, - 0.647513, - 0.730099, - 0.769931, - 0.762496, - 0.722365, - 0.624736, - 0.484547, - 0.299467, - 0.090544, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008154999999999999, - 0.08208700000000001, - 0.35286399999999996, - 0.503592, - 0.648299, - 0.626173, - 0.383484, - 0.446698, - 0.475339, - 0.178368, - 0.163679, - 0.104948, - 0.027759, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09802899999999999, - 0.259078, - 0.32610500000000003, - 0.381897, - 0.189616, - 0.476332, - 0.603183, - 0.537755, - 0.324527, - 0.35591500000000004, - 0.215447, - 0.08920499999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008484, - 0.155226, - 0.365468, - 0.537476, - 0.66938, - 0.755377, - 0.7961739999999999, - 0.78983, - 0.380897, - 0.472947, - 0.205452, - 0.120952, - 0.021072, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010284000000000001, - 0.16378600000000001, - 0.379092, - 0.549883, - 0.674282, - 0.7544270000000001, - 0.784396, - 0.763225, - 0.704767, - 0.604391, - 0.470884, - 0.28860800000000003, - 0.092624, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011672, - 0.16034, - 0.368438, - 0.539048, - 0.6661180000000001, - 0.7510399999999999, - 0.771501, - 0.7412880000000001, - 0.676354, - 0.577233, - 0.45210300000000003, - 0.28647500000000004, - 0.093061, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013548, - 0.162237, - 0.36579, - 0.53099, - 0.649633, - 0.718287, - 0.735898, - 0.709253, - 0.6583920000000001, - 0.574806, - 0.452233, - 0.278528, - 0.09145099999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014098000000000001, - 0.16071100000000002, - 0.355671, - 0.501487, - 0.6196309999999999, - 0.7067129999999999, - 0.748565, - 0.746015, - 0.698871, - 0.602509, - 0.463026, - 0.299421, - 0.096711, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014199, - 0.168587, - 0.37761399999999995, - 0.541717, - 0.658953, - 0.730346, - 0.7464299999999999, - 0.709284, - 0.651704, - 0.587295, - 0.465312, - 0.29039499999999996, - 0.095122, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015702999999999998, - 0.16558799999999999, - 0.367365, - 0.526586, - 0.6380309999999999, - 0.7057559999999999, - 0.7220610000000001, - 0.6947129999999999, - 0.65732, - 0.5859650000000001, - 0.460868, - 0.285677, - 0.094719, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015663, - 0.160244, - 0.360363, - 0.518244, - 0.630502, - 0.7020270000000001, - 0.721552, - 0.704256, - 0.647636, - 0.566264, - 0.443056, - 0.27703300000000003, - 0.094347, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017818, - 0.161547, - 0.348586, - 0.48762900000000003, - 0.594683, - 0.6775890000000001, - 0.717635, - 0.718139, - 0.674953, - 0.588174, - 0.45766199999999996, - 0.28566199999999997, - 0.09751699999999999, - 0.000884, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019586, - 0.171746, - 0.371196, - 0.505783, - 0.570112, - 0.6657609999999999, - 0.666184, - 0.766402, - 0.7146330000000001, - 0.5055149999999999, - 0.42571800000000004, - 0.264512, - 0.09479800000000001, - 0.001592, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023765, - 0.168226, - 0.314747, - 0.48953199999999997, - 0.6566609999999999, - 0.733024, - 0.775652, - 0.294155, - 0.34824099999999997, - 0.638282, - 0.498584, - 0.22563, - 0.111778, - 0.001849, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027780000000000003, - 0.17932900000000002, - 0.384343, - 0.281111, - 0.682115, - 0.768111, - 0.807403, - 0.712447, - 0.364597, - 0.082512, - 0.42072000000000004, - 0.228365, - 0.110783, - 0.002996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024001, - 0.187811, - 0.39814499999999997, - 0.563, - 0.491871, - 0.760876, - 0.787202, - 0.770135, - 0.511757, - 0.503337, - 0.470674, - 0.294127, - 0.104197, - 0.00276, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025634, - 0.17385599999999998, - 0.360719, - 0.511978, - 0.628001, - 0.7070660000000001, - 0.749035, - 0.745674, - 0.699461, - 0.60202, - 0.46660700000000005, - 0.290762, - 0.106836, - 0.002242, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030077000000000003, - 0.177895, - 0.368394, - 0.527759, - 0.65099, - 0.739336, - 0.78059, - 0.774771, - 0.7191230000000001, - 0.624389, - 0.48478, - 0.304426, - 0.10920099999999999, - 0.003985, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02982, - 0.182881, - 0.377786, - 0.532938, - 0.655054, - 0.738601, - 0.777452, - 0.770897, - 0.721355, - 0.6283719999999999, - 0.491968, - 0.31301, - 0.112516, - 0.0045780000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027966, - 0.188729, - 0.390241, - 0.549544, - 0.669653, - 0.7602380000000001, - 0.7978310000000001, - 0.78787, - 0.734248, - 0.637231, - 0.498815, - 0.316668, - 0.114202, - 0.0031269999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.029353, - 0.209994, - 0.429993, - 0.5952569999999999, - 0.712356, - 0.7816649999999999, - 0.811209, - 0.794807, - 0.735446, - 0.643344, - 0.506985, - 0.325111, - 0.120192, - 0.004144999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.032761000000000005, - 0.197406, - 0.405572, - 0.565692, - 0.6842050000000001, - 0.762223, - 0.798749, - 0.7916799999999999, - 0.7388790000000001, - 0.643138, - 0.5050520000000001, - 0.322899, - 0.120985, - 0.0054, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036361, - 0.193815, - 0.398789, - 0.564962, - 0.693448, - 0.7761849999999999, - 0.812235, - 0.712507, - 0.167505, - 0.48988299999999996, - 0.503308, - 0.317582, - 0.11928, - 0.005496, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035205, - 0.19121000000000002, - 0.389172, - 0.548788, - 0.6688390000000001, - 0.747393, - 0.78587, - 0.7790860000000001, - 0.7334189999999999, - 0.637138, - 0.406315, - 0.27494, - 0.108342, - 0.007724, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034149, - 0.190958, - 0.391731, - 0.559068, - 0.688788, - 0.774586, - 0.81349, - 0.807757, - 0.750432, - 0.6541119999999999, - 0.514418, - 0.331288, - 0.12529099999999999, - 0.005084, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031354, - 0.199011, - 0.403476, - 0.558457, - 0.664685, - 0.7215069999999999, - 0.742147, - 0.728673, - 0.6881799999999999, - 0.6027830000000001, - 0.47908300000000004, - 0.312613, - 0.120687, - 0.004825, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031899000000000004, - 0.201569, - 0.40648700000000004, - 0.560793, - 0.672029, - 0.739583, - 0.761017, - 0.7408250000000001, - 0.682249, - 0.585124, - 0.467391, - 0.312076, - 0.121537, - 0.00521, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.032219000000000005, - 0.196378, - 0.39269400000000004, - 0.5413490000000001, - 0.652509, - 0.713539, - 0.7286950000000001, - 0.7007380000000001, - 0.6407999999999999, - 0.5752970000000001, - 0.46989600000000004, - 0.308466, - 0.120066, - 0.005534, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031833, - 0.191333, - 0.37551999999999996, - 0.514594, - 0.6312989999999999, - 0.711431, - 0.751192, - 0.7492859999999999, - 0.703858, - 0.614596, - 0.48463799999999996, - 0.314851, - 0.12098600000000001, - 0.004995, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031925, - 0.197052, - 0.38814800000000005, - 0.524762, - 0.626928, - 0.692374, - 0.716143, - 0.7076140000000001, - 0.661907, - 0.584851, - 0.469053, - 0.306459, - 0.121005, - 0.005863, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033595, - 0.18772, - 0.371257, - 0.515101, - 0.626413, - 0.7079650000000001, - 0.7441380000000001, - 0.7432519999999999, - 0.698558, - 0.611916, - 0.485512, - 0.319841, - 0.126107, - 0.005994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.03284, - 0.19814400000000001, - 0.290743, - 0.547235, - 0.668337, - 0.5950030000000001, - 0.781571, - 0.7700779999999999, - 0.720268, - 0.63188, - 0.49784300000000004, - 0.326458, - 0.128452, - 0.0070599999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037232999999999995, - 0.203264, - 0.40596699999999997, - 0.5646939999999999, - 0.6863239999999999, - 0.766539, - 0.802354, - 0.79383, - 0.7449990000000001, - 0.6507580000000001, - 0.5147419999999999, - 0.33799, - 0.13438, - 0.007757, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041719, - 0.205837, - 0.403714, - 0.562225, - 0.68536, - 0.770467, - 0.8036190000000001, - 0.794658, - 0.741831, - 0.646501, - 0.511359, - 0.334588, - 0.1348, - 0.009633, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04112, - 0.200904, - 0.39056799999999997, - 0.53426, - 0.642923, - 0.719899, - 0.747913, - 0.737051, - 0.695397, - 0.611998, - 0.490318, - 0.326181, - 0.13218000000000002, - 0.009722, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037342, - 0.199108, - 0.386202, - 0.529931, - 0.63807, - 0.70993, - 0.734398, - 0.719234, - 0.675148, - 0.594846, - 0.474974, - 0.313772, - 0.129152, - 0.009791000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038433, - 0.196039, - 0.375925, - 0.517062, - 0.630891, - 0.7089249999999999, - 0.743894, - 0.738548, - 0.55279, - 0.606056, - 0.479606, - 0.285516, - 0.126634, - 0.011359, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036768, - 0.15032900000000002, - 0.38269600000000004, - 0.525587, - 0.633947, - 0.710306, - 0.7484339999999999, - 0.74164, - 0.696926, - 0.611206, - 0.48445900000000003, - 0.322266, - 0.133146, - 0.011651, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035557000000000005, - 0.140129, - 0.275218, - 0.281443, - 0.555212, - 0.6315449999999999, - 0.538423, - 0.37727999999999995, - 0.13103, - 0.4337, - 0.204493, - 0.322255, - 0.12813999999999998, - 0.013416, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036653, - 0.182499, - 0.368115, - 0.527369, - 0.6296029999999999, - 0.699947, - 0.7440410000000001, - 0.678689, - 0.5085149999999999, - 0.525531, - 0.44005099999999997, - 0.255466, - 0.109786, - 0.014183999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036136, - 0.14699500000000001, - 0.288489, - 0.24065799999999998, - 0.49988900000000003, - 0.578037, - 0.650356, - 0.63781, - 0.596899, - 0.30871699999999996, - 0.27147000000000004, - 0.195782, - 0.079908, - 0.01413, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038274, - 0.18654300000000001, - 0.370752, - 0.51515, - 0.626788, - 0.691193, - 0.7007329999999999, - 0.6703049999999999, - 0.622845, - 0.5563400000000001, - 0.45074400000000003, - 0.298825, - 0.13105799999999998, - 0.014851000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038943, - 0.189664, - 0.370415, - 0.510782, - 0.621888, - 0.698824, - 0.73695, - 0.736352, - 0.69389, - 0.608862, - 0.48343, - 0.32593700000000003, - 0.138957, - 0.015052, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025207, - 0.086544, - 0.2025, - 0.14699500000000001, - 0.178921, - 0.595679, - 0.511918, - 0.746797, - 0.712818, - 0.496055, - 0.49797, - 0.328073, - 0.142975, - 0.016474, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041927, - 0.198898, - 0.393727, - 0.550537, - 0.6721630000000001, - 0.752691, - 0.791807, - 0.78639, - 0.738726, - 0.645733, - 0.5130410000000001, - 0.34267200000000003, - 0.146853, - 0.017783999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.042822000000000006, - 0.218983, - 0.42624900000000004, - 0.585924, - 0.714679, - 0.796581, - 0.833333, - 0.825641, - 0.768677, - 0.673288, - 0.537254, - 0.365889, - 0.158408, - 0.016905999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.04112, - 0.222062, - 0.43511500000000003, - 0.5996760000000001, - 0.723688, - 0.800942, - 0.823935, - 0.770372, - 0.7555660000000001, - 0.6604990000000001, - 0.5272519999999999, - 0.356379, - 0.154811, - 0.016048, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.039738, - 0.211647, - 0.410432, - 0.561813, - 0.668283, - 0.731834, - 0.7558980000000001, - 0.7365499999999999, - 0.680978, - 0.5893010000000001, - 0.475823, - 0.331582, - 0.146741, - 0.01765, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040382, - 0.205578, - 0.396413, - 0.54189, - 0.649263, - 0.7105090000000001, - 0.7303, - 0.715977, - 0.676191, - 0.603606, - 0.488602, - 0.335844, - 0.148165, - 0.017107, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038153, - 0.195684, - 0.380589, - 0.527771, - 0.645433, - 0.726718, - 0.766889, - 0.765923, - 0.72449, - 0.6376000000000001, - 0.510811, - 0.348852, - 0.153234, - 0.017542000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040301000000000003, - 0.21276499999999998, - 0.397152, - 0.5613859999999999, - 0.657985, - 0.736112, - 0.799551, - 0.793873, - 0.743774, - 0.653672, - 0.52134, - 0.354842, - 0.15535, - 0.019489, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041442, - 0.20097900000000002, - 0.40434800000000004, - 0.555787, - 0.6736019999999999, - 0.7528590000000001, - 0.7892509999999999, - 0.783377, - 0.734248, - 0.642808, - 0.512617, - 0.349675, - 0.15282099999999998, - 0.018852, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040202, - 0.20501499999999998, - 0.39755, - 0.540271, - 0.639068, - 0.692349, - 0.700532, - 0.688028, - 0.6645460000000001, - 0.602483, - 0.488937, - 0.33738999999999997, - 0.149673, - 0.020681, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040042, - 0.197246, - 0.37905399999999995, - 0.5143049999999999, - 0.6287820000000001, - 0.707105, - 0.7448049999999999, - 0.743107, - 0.7003659999999999, - 0.616591, - 0.486174, - 0.33345400000000003, - 0.143232, - 0.018938, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038765999999999995, - 0.197042, - 0.387881, - 0.538791, - 0.657811, - 0.7370359999999999, - 0.774551, - 0.770784, - 0.7249329999999999, - 0.63695, - 0.509798, - 0.34986900000000004, - 0.154938, - 0.019857, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041406, - 0.19886099999999998, - 0.388235, - 0.535121, - 0.6438630000000001, - 0.705975, - 0.725391, - 0.714668, - 0.678412, - 0.606443, - 0.491455, - 0.340374, - 0.152591, - 0.021883, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.040060000000000005, - 0.19684100000000002, - 0.387821, - 0.5342619999999999, - 0.637538, - 0.692408, - 0.7136520000000001, - 0.7049460000000001, - 0.6715800000000001, - 0.602635, - 0.4875, - 0.337202, - 0.15294999999999997, - 0.021945, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043266, - 0.192819, - 0.37493400000000005, - 0.514085, - 0.619599, - 0.692432, - 0.731464, - 0.731559, - 0.690725, - 0.602467, - 0.48736399999999996, - 0.33621100000000004, - 0.15224100000000002, - 0.021474, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.039131, - 0.191453, - 0.37524, - 0.5184489999999999, - 0.624524, - 0.693374, - 0.721629, - 0.719843, - 0.684012, - 0.6048920000000001, - 0.486957, - 0.333826, - 0.151323, - 0.020812999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037859000000000004, - 0.19366999999999998, - 0.381596, - 0.526567, - 0.638955, - 0.714146, - 0.751456, - 0.748071, - 0.7045220000000001, - 0.620471, - 0.498634, - 0.343065, - 0.154632, - 0.020844, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035847000000000004, - 0.19053299999999998, - 0.376516, - 0.517941, - 0.626421, - 0.7018220000000001, - 0.739202, - 0.738702, - 0.6984400000000001, - 0.61653, - 0.495889, - 0.343176, - 0.155891, - 0.020914000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034868, - 0.189607, - 0.373081, - 0.512719, - 0.619819, - 0.676603, - 0.7242970000000001, - 0.730967, - 0.692896, - 0.613929, - 0.48014, - 0.328728, - 0.152944, - 0.019939, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033680999999999996, - 0.16467400000000001, - 0.319664, - 0.461029, - 0.618574, - 0.6915159999999999, - 0.7179, - 0.716426, - 0.605262, - 0.549984, - 0.431166, - 0.26499, - 0.14321199999999998, - 0.021338, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033055, - 0.158804, - 0.333644, - 0.475215, - 0.588523, - 0.71125, - 0.725481, - 0.70569, - 0.695136, - 0.6300159999999999, - 0.506945, - 0.351519, - 0.159383, - 0.020635999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033642000000000005, - 0.180592, - 0.35109199999999996, - 0.478918, - 0.5865560000000001, - 0.660199, - 0.6980270000000001, - 0.696112, - 0.655494, - 0.37572300000000003, - 0.231172, - 0.316745, - 0.14757900000000002, - 0.022646, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033409999999999995, - 0.178671, - 0.357849, - 0.50072, - 0.609645, - 0.686665, - 0.724547, - 0.725538, - 0.685388, - 0.605172, - 0.485137, - 0.33492, - 0.153879, - 0.022616, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.034295, - 0.18945099999999998, - 0.3822, - 0.536862, - 0.659258, - 0.744155, - 0.783871, - 0.7787029999999999, - 0.7316630000000001, - 0.6435420000000001, - 0.515283, - 0.35550099999999996, - 0.161887, - 0.021529, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037520000000000005, - 0.197154, - 0.39357400000000003, - 0.5398099999999999, - 0.642197, - 0.699843, - 0.730161, - 0.732009, - 0.6996359999999999, - 0.627283, - 0.509817, - 0.35464999999999997, - 0.161286, - 0.02129, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031948, - 0.188439, - 0.37681, - 0.513817, - 0.614227, - 0.689768, - 0.733209, - 0.738884, - 0.702857, - 0.624936, - 0.505193, - 0.35572699999999996, - 0.162479, - 0.017716000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028822, - 0.195447, - 0.393019, - 0.5397329999999999, - 0.645183, - 0.704693, - 0.73956, - 0.739881, - 0.7017279999999999, - 0.6262190000000001, - 0.50915, - 0.355665, - 0.16354400000000002, - 0.018168, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028170999999999998, - 0.195689, - 0.39605399999999996, - 0.546616, - 0.65837, - 0.729157, - 0.766378, - 0.763892, - 0.722227, - 0.640786, - 0.51985, - 0.362557, - 0.165882, - 0.017826, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027849, - 0.193765, - 0.39143700000000003, - 0.5340499999999999, - 0.627211, - 0.6825249999999999, - 0.711657, - 0.7111559999999999, - 0.676004, - 0.6043440000000001, - 0.494711, - 0.346157, - 0.15918100000000002, - 0.016695, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.026806, - 0.187631, - 0.374859, - 0.503897, - 0.586672, - 0.656679, - 0.5724859999999999, - 0.700259, - 0.640009, - 0.5685119999999999, - 0.45714499999999997, - 0.325433, - 0.149855, - 0.021518000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.029771000000000002, - 0.167203, - 0.34266800000000003, - 0.480284, - 0.585948, - 0.657707, - 0.692002, - 0.689659, - 0.587314, - 0.587776, - 0.473223, - 0.323367, - 0.147375, - 0.021834, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033407, - 0.159736, - 0.335692, - 0.47524099999999997, - 0.5831069999999999, - 0.658111, - 0.699041, - 0.61314, - 0.583372, - 0.585461, - 0.470721, - 0.322364, - 0.14804900000000001, - 0.023818000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028475, - 0.169211, - 0.356615, - 0.506901, - 0.622581, - 0.7033579999999999, - 0.742394, - 0.7405900000000001, - 0.704444, - 0.6230289999999999, - 0.501395, - 0.346339, - 0.156408, - 0.017728999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024974, - 0.175667, - 0.368088, - 0.521645, - 0.640152, - 0.719812, - 0.7597849999999999, - 0.758857, - 0.716019, - 0.6316, - 0.509522, - 0.356269, - 0.161958, - 0.017498, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0265, - 0.171648, - 0.358034, - 0.504274, - 0.61488, - 0.6888540000000001, - 0.7294039999999999, - 0.7289439999999999, - 0.693065, - 0.610286, - 0.48495499999999997, - 0.332512, - 0.152704, - 0.023977000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022515999999999998, - 0.084023, - 0.277282, - 0.204399, - 0.533362, - 0.5530109999999999, - 0.496407, - 0.536986, - 0.506528, - 0.290825, - 0.377672, - 0.273443, - 0.10129200000000001, - 0.020077, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.029623999999999998, - 0.169984, - 0.35880900000000004, - 0.519102, - 0.644633, - 0.735249, - 0.774864, - 0.7689239999999999, - 0.7279500000000001, - 0.646058, - 0.52147, - 0.361056, - 0.163673, - 0.016846, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022645, - 0.174845, - 0.371355, - 0.523745, - 0.636038, - 0.711097, - 0.749275, - 0.747565, - 0.709711, - 0.631049, - 0.510715, - 0.3525, - 0.15849000000000002, - 0.015778, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020832999999999997, - 0.17463900000000002, - 0.368286, - 0.5166069999999999, - 0.6230829999999999, - 0.69323, - 0.733054, - 0.730793, - 0.6929460000000001, - 0.614465, - 0.49593400000000004, - 0.341185, - 0.152788, - 0.016417, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.006144, - 0.07465000000000001, - 0.270973, - 0.37614, - 0.463733, - 0.323115, - 0.416686, - 0.418754, - 0.47887799999999997, - 0.5608730000000001, - 0.455164, - 0.325289, - 0.14563900000000002, - 0.017425, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008376, - 0.096971, - 0.333249, - 0.47708300000000003, - 0.5870700000000001, - 0.667234, - 0.705943, - 0.7063740000000001, - 0.6654779999999999, - 0.589662, - 0.472858, - 0.320355, - 0.14424700000000001, - 0.017287, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.020425000000000002, - 0.15854, - 0.34454, - 0.49261900000000003, - 0.607958, - 0.687275, - 0.727647, - 0.726949, - 0.689226, - 0.6100140000000001, - 0.49165499999999995, - 0.338763, - 0.150404, - 0.015352000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018639, - 0.165161, - 0.359976, - 0.511953, - 0.6245689999999999, - 0.700379, - 0.740152, - 0.7385900000000001, - 0.6966950000000001, - 0.616583, - 0.496722, - 0.341349, - 0.15143299999999998, - 0.015276999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017901, - 0.16643799999999997, - 0.363272, - 0.517631, - 0.635094, - 0.713886, - 0.755038, - 0.752393, - 0.7103630000000001, - 0.62615, - 0.502616, - 0.34526100000000004, - 0.151745, - 0.013311, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016861, - 0.16393100000000002, - 0.357118, - 0.510175, - 0.627952, - 0.712211, - 0.755189, - 0.755255, - 0.71515, - 0.633672, - 0.51157, - 0.353733, - 0.15578399999999998, - 0.012785999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016267, - 0.166452, - 0.36075, - 0.5108469999999999, - 0.628792, - 0.711665, - 0.7528210000000001, - 0.7519710000000001, - 0.71325, - 0.6281749999999999, - 0.504735, - 0.348151, - 0.152898, - 0.012986000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016765000000000002, - 0.16118700000000002, - 0.350588, - 0.5028210000000001, - 0.6194550000000001, - 0.6994199999999999, - 0.738958, - 0.7347469999999999, - 0.697543, - 0.6142029999999999, - 0.491095, - 0.334322, - 0.14533000000000001, - 0.013602, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017179, - 0.150042, - 0.332447, - 0.478684, - 0.5913390000000001, - 0.669427, - 0.710054, - 0.706696, - 0.6671119999999999, - 0.585976, - 0.46509500000000004, - 0.315475, - 0.132756, - 0.008747, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002205, - 0.060121, - 0.06674200000000001, - 0.061644, - 0.5719059999999999, - 0.574131, - 0.665625, - 0.057652999999999996, - 0.18019200000000002, - 0.15434, - 0.020325, - 0.11923600000000001, - 0.014959, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016055, - 0.14385499999999998, - 0.32550999999999997, - 0.468585, - 0.5821810000000001, - 0.6652619999999999, - 0.707637, - 0.709312, - 0.671417, - 0.59437, - 0.47650400000000004, - 0.323766, - 0.13886, - 0.012132, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013907, - 0.15060300000000001, - 0.338698, - 0.490125, - 0.6058819999999999, - 0.687158, - 0.7290249999999999, - 0.728403, - 0.692297, - 0.609715, - 0.487755, - 0.326013, - 0.13918799999999998, - 0.011949, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013433, - 0.147872, - 0.33881, - 0.490784, - 0.6050829999999999, - 0.68032, - 0.7208, - 0.723591, - 0.6853440000000001, - 0.60637, - 0.487599, - 0.328384, - 0.139934, - 0.010964, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.01367, - 0.143287, - 0.32917599999999997, - 0.479076, - 0.5934510000000001, - 0.6749120000000001, - 0.715701, - 0.714788, - 0.679074, - 0.5981029999999999, - 0.476885, - 0.319809, - 0.134625, - 0.009939, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013558, - 0.144707, - 0.331373, - 0.48279700000000003, - 0.598018, - 0.67574, - 0.7144149999999999, - 0.714332, - 0.677572, - 0.5981799999999999, - 0.47788099999999994, - 0.31953699999999996, - 0.133824, - 0.00968, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011961000000000001, - 0.142739, - 0.332787, - 0.485333, - 0.5991409999999999, - 0.673432, - 0.713125, - 0.711305, - 0.66795, - 0.5905549999999999, - 0.473401, - 0.31971, - 0.13300399999999998, - 0.008078, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011664999999999998, - 0.142928, - 0.329692, - 0.481033, - 0.594195, - 0.672692, - 0.713345, - 0.713251, - 0.678145, - 0.596621, - 0.47567200000000004, - 0.318065, - 0.131356, - 0.007741, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010717, - 0.141215, - 0.32306999999999997, - 0.472989, - 0.5841989999999999, - 0.663044, - 0.702528, - 0.700881, - 0.658143, - 0.5762480000000001, - 0.455995, - 0.306647, - 0.12728799999999998, - 0.0070739999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.051, - 0.008494, - 0.39469099999999996, - 0.592891, - 0.5977140000000001, - 0.625775, - 0.633501, - 0.666396, - 0.587482, - 0.466099, - 0.312025, - 0.127938, - 0.006742, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.010239000000000002, - 0.136447, - 0.321606, - 0.47143799999999997, - 0.584718, - 0.666158, - 0.711609, - 0.7137279999999999, - 0.673858, - 0.5951799999999999, - 0.474097, - 0.318847, - 0.128992, - 0.005772, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008298, - 0.141035, - 0.331121, - 0.481951, - 0.5919260000000001, - 0.66831, - 0.703824, - 0.704922, - 0.66969, - 0.591263, - 0.470706, - 0.31249099999999996, - 0.124811, - 0.00512, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008267, - 0.13709100000000002, - 0.324084, - 0.47602300000000003, - 0.590712, - 0.6668339999999999, - 0.707945, - 0.705119, - 0.5290860000000001, - 0.582878, - 0.460252, - 0.304499, - 0.12271800000000001, - 0.005093, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008072, - 0.133481, - 0.320299, - 0.47744600000000004, - 0.5994700000000001, - 0.686033, - 0.731494, - 0.7350220000000001, - 0.690578, - 0.6070180000000001, - 0.480834, - 0.321745, - 0.126792, - 0.004812, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.00779, - 0.144517, - 0.34993599999999997, - 0.5198740000000001, - 0.646922, - 0.735993, - 0.777798, - 0.7723669999999999, - 0.727992, - 0.6371749999999999, - 0.504147, - 0.33224400000000004, - 0.128842, - 0.0031720000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005487, - 0.143456, - 0.34610599999999997, - 0.5088360000000001, - 0.6307910000000001, - 0.7117910000000001, - 0.75539, - 0.754596, - 0.7095990000000001, - 0.6220979999999999, - 0.492528, - 0.325678, - 0.125438, - 0.00323, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.005373, - 0.143227, - 0.347498, - 0.507187, - 0.623888, - 0.698751, - 0.743804, - 0.7470289999999999, - 0.7061799999999999, - 0.621328, - 0.49452999999999997, - 0.327817, - 0.12532, - 0.002697, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004726, - 0.140213, - 0.342374, - 0.503129, - 0.623875, - 0.705729, - 0.750364, - 0.7530359999999999, - 0.708913, - 0.623654, - 0.494181, - 0.32613400000000003, - 0.124193, - 0.002797, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004099, - 0.138907, - 0.33822199999999997, - 0.49629399999999996, - 0.6172190000000001, - 0.699663, - 0.744261, - 0.7467849999999999, - 0.7037709999999999, - 0.618878, - 0.49122699999999997, - 0.322232, - 0.12040000000000001, - 0.004202, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004652999999999999, - 0.13662100000000002, - 0.335481, - 0.500767, - 0.628244, - 0.71245, - 0.754878, - 0.750611, - 0.7082430000000001, - 0.6189020000000001, - 0.488597, - 0.318644, - 0.117093, - 0.003629, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004006, - 0.12913999999999998, - 0.322255, - 0.47945299999999996, - 0.598459, - 0.6774779999999999, - 0.715392, - 0.712467, - 0.671119, - 0.583727, - 0.45869600000000005, - 0.29936399999999996, - 0.108293, - 0.0029519999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003899, - 0.12675799999999998, - 0.31815499999999997, - 0.47454399999999997, - 0.587348, - 0.665582, - 0.70674, - 0.706788, - 0.6687759999999999, - 0.585743, - 0.46137599999999995, - 0.296981, - 0.105639, - 0.002359, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003335, - 0.12366200000000001, - 0.312546, - 0.465404, - 0.559199, - 0.5404, - 0.70363, - 0.70052, - 0.5617179999999999, - 0.439291, - 0.400668, - 0.265927, - 0.091641, - 0.001224, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002798, - 0.1184, - 0.31002199999999996, - 0.46475900000000003, - 0.579596, - 0.654808, - 0.694721, - 0.69426, - 0.653168, - 0.570881, - 0.44455700000000004, - 0.27406400000000003, - 0.09713899999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002406, - 0.11888800000000001, - 0.306836, - 0.458847, - 0.5712240000000001, - 0.640745, - 0.679603, - 0.678552, - 0.6374, - 0.555199, - 0.42962, - 0.265231, - 0.092832, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003706, - 0.11653400000000001, - 0.303732, - 0.457692, - 0.5733769999999999, - 0.6570170000000001, - 0.697658, - 0.698473, - 0.658043, - 0.573277, - 0.445885, - 0.278466, - 0.095026, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0037029999999999997, - 0.119132, - 0.310663, - 0.471481, - 0.5915940000000001, - 0.675332, - 0.7174109999999999, - 0.717658, - 0.673609, - 0.586452, - 0.459546, - 0.28980399999999995, - 0.09557500000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004319, - 0.103644, - 0.32169099999999995, - 0.487144, - 0.551172, - 0.69414, - 0.673451, - 0.7319589999999999, - 0.687357, - 0.596832, - 0.466117, - 0.29257299999999997, - 0.094847, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.003241, - 0.125825, - 0.32913600000000004, - 0.491283, - 0.608404, - 0.685315, - 0.726881, - 0.727384, - 0.67992, - 0.592128, - 0.46148, - 0.287145, - 0.090999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002592, - 0.121434, - 0.31897699999999996, - 0.481742, - 0.599483, - 0.674786, - 0.710134, - 0.7068369999999999, - 0.6632129999999999, - 0.575431, - 0.44741699999999995, - 0.275254, - 0.08604300000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.002052, - 0.11815600000000001, - 0.316576, - 0.481294, - 0.60136, - 0.6816319999999999, - 0.719354, - 0.711635, - 0.66908, - 0.577789, - 0.445101, - 0.274327, - 0.08402899999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0021469999999999996, - 0.119984, - 0.325624, - 0.496, - 0.621972, - 0.7033809999999999, - 0.745115, - 0.739527, - 0.690571, - 0.597995, - 0.463714, - 0.285745, - 0.0858, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0015609999999999999, - 0.118184, - 0.31664299999999995, - 0.475954, - 0.59654, - 0.678072, - 0.717777, - 0.713781, - 0.671649, - 0.580697, - 0.448352, - 0.27414499999999997, - 0.080693, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.000907, - 0.10832699999999999, - 0.293983, - 0.45682799999999996, - 0.5807089999999999, - 0.663621, - 0.704661, - 0.703154, - 0.570496, - 0.490773, - 0.372096, - 0.251903, - 0.073857, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.103695, - 0.284952, - 0.414459, - 0.514033, - 0.646885, - 0.600637, - 0.5662229999999999, - 0.5573210000000001, - 0.162833, - 0.100768, - 0.22199100000000002, - 0.071107, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.103206, - 0.29133499999999996, - 0.44874200000000003, - 0.5677380000000001, - 0.652242, - 0.693485, - 0.6906359999999999, - 0.6478160000000001, - 0.5596810000000001, - 0.427318, - 0.255113, - 0.069294, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.105546, - 0.297691, - 0.44755399999999995, - 0.55668, - 0.636774, - 0.678643, - 0.6782229999999999, - 0.636747, - 0.550224, - 0.42310899999999996, - 0.25056, - 0.066012, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.104811, - 0.293671, - 0.43728500000000003, - 0.542678, - 0.613101, - 0.644374, - 0.641531, - 0.605519, - 0.38060000000000005, - 0.248685, - 0.218975, - 0.062952, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041209, - 0.287834, - 0.44327999999999995, - 0.560703, - 0.646821, - 0.688198, - 0.6843769999999999, - 0.319996, - 0.033862, - 0.411325, - 0.061418999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09678, - 0.273964, - 0.42163799999999996, - 0.531984, - 0.616543, - 0.6516109999999999, - 0.649445, - 0.610274, - 0.463975, - 0.349865, - 0.24739, - 0.060881, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10677800000000001, - 0.30363, - 0.457733, - 0.575913, - 0.655412, - 0.697217, - 0.6968300000000001, - 0.651571, - 0.56072, - 0.425363, - 0.244651, - 0.058516, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10578, - 0.305517, - 0.45350599999999996, - 0.5525890000000001, - 0.6343880000000001, - 0.674273, - 0.18954300000000002, - 0.02104, - 0.016468, - 0.41572699999999996, - 0.237429, - 0.055146, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.100547, - 0.294126, - 0.453463, - 0.573006, - 0.651343, - 0.687822, - 0.681296, - 0.24521700000000002, - 0.20402099999999998, - 0.049485, - 0.165898, - 0.053232999999999996, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09804399999999999, - 0.29430700000000004, - 0.44932, - 0.5666599999999999, - 0.64324, - 0.676222, - 0.668314, - 0.620078, - 0.527533, - 0.39703, - 0.220797, - 0.049773000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.095766, - 0.285087, - 0.443277, - 0.555987, - 0.630669, - 0.662021, - 0.653458, - 0.604665, - 0.5159790000000001, - 0.160728, - 0.21544300000000002, - 0.019963, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094664, - 0.283039, - 0.445112, - 0.560492, - 0.642205, - 0.680275, - 0.676956, - 0.6302150000000001, - 0.536471, - 0.40004399999999996, - 0.219795, - 0.04439, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094322, - 0.284843, - 0.44501999999999997, - 0.564142, - 0.646529, - 0.685341, - 0.6824349999999999, - 0.634381, - 0.5359539999999999, - 0.39334800000000003, - 0.21319, - 0.04134, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.100071, - 0.30755200000000005, - 0.484047, - 0.609601, - 0.692317, - 0.728324, - 0.719368, - 0.6709210000000001, - 0.570039, - 0.425938, - 0.228274, - 0.042527, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.100576, - 0.310529, - 0.490254, - 0.617924, - 0.700704, - 0.738758, - 0.725837, - 0.670923, - 0.569414, - 0.423811, - 0.22773400000000002, - 0.040129, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.096688, - 0.296982, - 0.462267, - 0.584386, - 0.6715220000000001, - 0.7120700000000001, - 0.705865, - 0.654162, - 0.55788, - 0.417105, - 0.222715, - 0.037112, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094015, - 0.297892, - 0.463688, - 0.580667, - 0.65659, - 0.683769, - 0.664187, - 0.603245, - 0.507748, - 0.381339, - 0.204911, - 0.032825, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.089437, - 0.288495, - 0.450819, - 0.563432, - 0.6369450000000001, - 0.663785, - 0.646377, - 0.584783, - 0.495367, - 0.371068, - 0.19668, - 0.030812000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.085122, - 0.280087, - 0.443914, - 0.56216, - 0.640024, - 0.6776599999999999, - 0.672249, - 0.617878, - 0.517169, - 0.37389100000000003, - 0.18049, - 0.024440999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.082076, - 0.262995, - 0.430628, - 0.557104, - 0.653967, - 0.690711, - 0.6798630000000001, - 0.6282920000000001, - 0.519812, - 0.36776299999999995, - 0.19318100000000002, - 0.026951, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.093292, - 0.30844099999999997, - 0.49885199999999996, - 0.6368590000000001, - 0.7314550000000001, - 0.770456, - 0.755887, - 0.695492, - 0.581945, - 0.424542, - 0.21530000000000002, - 0.02658, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.097021, - 0.321579, - 0.512035, - 0.650868, - 0.737379, - 0.774154, - 0.7584919999999999, - 0.692058, - 0.580783, - 0.42652999999999996, - 0.214105, - 0.02451, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.094604, - 0.314513, - 0.501854, - 0.631984, - 0.716062, - 0.748725, - 0.72917, - 0.666026, - 0.558239, - 0.407743, - 0.20517, - 0.020307, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.090443, - 0.30183, - 0.47558, - 0.59437, - 0.6673680000000001, - 0.695031, - 0.6782619999999999, - 0.617726, - 0.523592, - 0.386385, - 0.191911, - 0.016558, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.083661, - 0.28184, - 0.462051, - 0.594452, - 0.6847190000000001, - 0.722514, - 0.713658, - 0.6546770000000001, - 0.5496449999999999, - 0.395652, - 0.190338, - 0.013626, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08790600000000001, - 0.302577, - 0.485401, - 0.608275, - 0.6831430000000001, - 0.709656, - 0.68916, - 0.6254829999999999, - 0.5240739999999999, - 0.379986, - 0.185525, - 0.011703, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08412900000000001, - 0.288859, - 0.46193599999999996, - 0.588503, - 0.669823, - 0.706303, - 0.694404, - 0.631456, - 0.524109, - 0.37300599999999995, - 0.174322, - 0.010048999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076842, - 0.26517, - 0.43738499999999997, - 0.572268, - 0.680645, - 0.7228920000000001, - 0.7130230000000001, - 0.652085, - 0.54532, - 0.392127, - 0.183145, - 0.009888999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.084713, - 0.30424799999999996, - 0.495755, - 0.6296470000000001, - 0.7134429999999999, - 0.746826, - 0.728238, - 0.6620940000000001, - 0.54926, - 0.390058, - 0.178299, - 0.008067999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08281699999999999, - 0.297822, - 0.484236, - 0.61248, - 0.6902010000000001, - 0.719336, - 0.69736, - 0.631652, - 0.522306, - 0.371261, - 0.16936400000000001, - 0.00624, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.079842, - 0.293498, - 0.47559199999999996, - 0.600124, - 0.6790470000000001, - 0.7072419999999999, - 0.685289, - 0.619202, - 0.514371, - 0.364967, - 0.164196, - 0.005873000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.073725, - 0.27306400000000003, - 0.44398200000000004, - 0.566296, - 0.650169, - 0.686335, - 0.675346, - 0.621106, - 0.517038, - 0.36465, - 0.160661, - 0.004835, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076723, - 0.28345800000000004, - 0.45745800000000003, - 0.578323, - 0.654049, - 0.68402, - 0.667159, - 0.6094579999999999, - 0.507566, - 0.357259, - 0.156128, - 0.00347, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059387, - 0.245905, - 0.371063, - 0.577198, - 0.5749890000000001, - 0.545766, - 0.563027, - 0.40292700000000004, - 0.200211, - 0.35852, - 0.154666, - 0.002508, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.068218, - 0.263673, - 0.43150900000000003, - 0.547331, - 0.577388, - 0.6052240000000001, - 0.5845009999999999, - 0.504705, - 0.376124, - 0.24774600000000002, - 0.080129, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067448, - 0.26474000000000003, - 0.439631, - 0.501317, - 0.587448, - 0.558698, - 0.356151, - 0.425711, - 0.257269, - 0.24675299999999997, - 0.047415, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.066188, - 0.260146, - 0.423949, - 0.546438, - 0.626352, - 0.662018, - 0.6532720000000001, - 0.594037, - 0.48781599999999997, - 0.333895, - 0.135472, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038423, - 0.232245, - 0.428281, - 0.54857, - 0.628002, - 0.662551, - 0.6523669999999999, - 0.593091, - 0.485763, - 0.3312, - 0.132563, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.062842, - 0.259795, - 0.439276, - 0.564822, - 0.6496430000000001, - 0.68271, - 0.671639, - 0.606659, - 0.493876, - 0.331801, - 0.129773, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.061281999999999996, - 0.26401100000000005, - 0.45386000000000004, - 0.588178, - 0.6725760000000001, - 0.706539, - 0.690717, - 0.625009, - 0.38653899999999997, - 0.245025, - 0.012269, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.054775, - 0.054612, - 0.217751, - 0.598576, - 0.347933, - 0.7161660000000001, - 0.6978, - 0.147157, - 0.207529, - 0.348006, - 0.003243, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.064946, - 0.284012, - 0.480082, - 0.6123999999999999, - 0.692093, - 0.724176, - 0.10127, - 0.227502, - 0.013538999999999999, - 0.020867, - 0.079705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.063347, - 0.27813, - 0.472509, - 0.6014640000000001, - 0.678023, - 0.704911, - 0.681207, - 0.6102179999999999, - 0.497005, - 0.328104, - 0.120082, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059893999999999996, - 0.267918, - 0.45728199999999997, - 0.5822780000000001, - 0.659768, - 0.684342, - 0.6632140000000001, - 0.596789, - 0.487321, - 0.325628, - 0.11706100000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.057939, - 0.266401, - 0.450442, - 0.570547, - 0.6335230000000001, - 0.6497179999999999, - 0.62914, - 0.568915, - 0.46653, - 0.313031, - 0.112288, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.054674, - 0.256502, - 0.436181, - 0.560947, - 0.5430510000000001, - 0.5617759999999999, - 0.646557, - 0.576778, - 0.462645, - 0.29918599999999995, - 0.103493, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052175, - 0.253827, - 0.441199, - 0.565236, - 0.636888, - 0.660554, - 0.639398, - 0.572006, - 0.462787, - 0.30038400000000004, - 0.100241, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.05171, - 0.255584, - 0.441209, - 0.5668150000000001, - 0.6413070000000001, - 0.668728, - 0.6488740000000001, - 0.5809030000000001, - 0.466656, - 0.30166699999999996, - 0.100827, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.050858, - 0.253434, - 0.43593, - 0.554246, - 0.620658, - 0.636805, - 0.607407, - 0.542194, - 0.44450599999999996, - 0.291452, - 0.09598999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.048127, - 0.243536, - 0.416502, - 0.45360500000000004, - 0.537848, - 0.6210370000000001, - 0.5384840000000001, - 0.44772500000000004, - 0.447344, - 0.251609, - 0.088078, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043531, - 0.219894, - 0.398851, - 0.524128, - 0.598099, - 0.6264109999999999, - 0.608898, - 0.557902, - 0.44674, - 0.28036700000000003, - 0.08276900000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043183, - 0.236495, - 0.416605, - 0.5397150000000001, - 0.62014, - 0.6529969999999999, - 0.635564, - 0.570061, - 0.45686200000000005, - 0.286976, - 0.084994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.042483, - 0.24319300000000002, - 0.430652, - 0.557433, - 0.634103, - 0.65854, - 0.632051, - 0.559492, - 0.446678, - 0.279265, - 0.08178, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041898000000000005, - 0.244881, - 0.436876, - 0.562731, - 0.6375449999999999, - 0.660394, - 0.633298, - 0.5588719999999999, - 0.447255, - 0.28070100000000003, - 0.080154, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038862, - 0.240059, - 0.423147, - 0.538959, - 0.618309, - 0.651651, - 0.636895, - 0.568049, - 0.453351, - 0.280725, - 0.07465000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035768, - 0.235137, - 0.422114, - 0.545661, - 0.618355, - 0.642042, - 0.616854, - 0.551388, - 0.442795, - 0.273832, - 0.070149, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.032957, - 0.230689, - 0.418208, - 0.539057, - 0.606037, - 0.6251019999999999, - 0.599024, - 0.534023, - 0.426995, - 0.262783, - 0.066952, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030677, - 0.229981, - 0.421015, - 0.546366, - 0.623522, - 0.650821, - 0.628068, - 0.558356, - 0.44204899999999997, - 0.26723399999999997, - 0.068591, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028468, - 0.22783799999999998, - 0.419799, - 0.541416, - 0.614899, - 0.63891, - 0.61291, - 0.5444289999999999, - 0.431063, - 0.260906, - 0.063857, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023306, - 0.20844900000000002, - 0.392553, - 0.5177609999999999, - 0.5979629999999999, - 0.6250439999999999, - 0.601333, - 0.481858, - 0.251106, - 0.163836, - 0.038179000000000005, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021533999999999998, - 0.206279, - 0.392372, - 0.523848, - 0.603898, - 0.63189, - 0.6067659999999999, - 0.5359109999999999, - 0.408934, - 0.233927, - 0.051175, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021013999999999998, - 0.210345, - 0.409751, - 0.54832, - 0.635013, - 0.6729080000000001, - 0.657267, - 0.586643, - 0.465536, - 0.27495800000000004, - 0.06324, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023575, - 0.232213, - 0.438413, - 0.570172, - 0.648104, - 0.6710900000000001, - 0.643169, - 0.571905, - 0.45200999999999997, - 0.26927100000000004, - 0.060287999999999994, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.022057, - 0.229532, - 0.432834, - 0.564585, - 0.6408769999999999, - 0.663053, - 0.634691, - 0.556892, - 0.43673700000000004, - 0.25705399999999995, - 0.0555, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019889, - 0.22059600000000001, - 0.418784, - 0.544142, - 0.621509, - 0.644906, - 0.620247, - 0.547282, - 0.428476, - 0.248886, - 0.050881, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.018111000000000002, - 0.215781, - 0.41248599999999996, - 0.536329, - 0.6052390000000001, - 0.625668, - 0.598826, - 0.378624, - 0.37693, - 0.196311, - 0.046908, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017030999999999998, - 0.21016200000000002, - 0.40384800000000004, - 0.398018, - 0.5812350000000001, - 0.60954, - 0.592482, - 0.528775, - 0.417814, - 0.23981899999999998, - 0.023097000000000003, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.014684, - 0.2049, - 0.402571, - 0.5423429999999999, - 0.547418, - 0.4093, - 0.30870299999999995, - 0.547997, - 0.319856, - 0.220202, - 0.036376, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.011456, - 0.19670500000000002, - 0.39527100000000004, - 0.528978, - 0.60876, - 0.6316799999999999, - 0.6076480000000001, - 0.5428339999999999, - 0.42582, - 0.242606, - 0.040801000000000004, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.013673999999999999, - 0.214113, - 0.420834, - 0.5597430000000001, - 0.6427039999999999, - 0.67048, - 0.642612, - 0.565605, - 0.4367, - 0.24651599999999999, - 0.038451, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012035, - 0.20561600000000002, - 0.40593599999999996, - 0.54108, - 0.6207, - 0.647239, - 0.6209779999999999, - 0.545631, - 0.42242, - 0.23296899999999998, - 0.033108, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008978, - 0.192532, - 0.388581, - 0.521621, - 0.60124, - 0.629786, - 0.6043350000000001, - 0.531867, - 0.409298, - 0.227534, - 0.029854, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007753, - 0.187654, - 0.38234199999999996, - 0.511464, - 0.585287, - 0.60662, - 0.581268, - 0.511805, - 0.398883, - 0.224148, - 0.02818, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.007053, - 0.185805, - 0.375927, - 0.500037, - 0.56963, - 0.597468, - 0.5773830000000001, - 0.510872, - 0.39615, - 0.219048, - 0.026705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004099, - 0.18094200000000002, - 0.37263, - 0.5011909999999999, - 0.574722, - 0.597499, - 0.570586, - 0.501077, - 0.384611, - 0.20900200000000002, - 0.02296, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004468, - 0.175241, - 0.364012, - 0.478192, - 0.5475460000000001, - 0.583438, - 0.439335, - 0.504962, - 0.389358, - 0.21044300000000002, - 0.022756000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.177291, - 0.373799, - 0.507509, - 0.591043, - 0.6192960000000001, - 0.597124, - 0.52324, - 0.400737, - 0.21434, - 0.021555, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.150385, - 0.338997, - 0.4818, - 0.572628, - 0.6017469999999999, - 0.580009, - 0.373573, - 0.37421, - 0.194152, - 0.003354, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.14979699999999999, - 0.228929, - 0.481213, - 0.568846, - 0.600154, - 0.580215, - 0.51209, - 0.392079, - 0.20922900000000003, - 0.020467, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08083199999999999, - 0.232099, - 0.482801, - 0.5627190000000001, - 0.498164, - 0.435174, - 0.351072, - 0.28915199999999996, - 0.14305199999999998, - 0.003283, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024513, - 0.346494, - 0.32615, - 0.573357, - 0.607205, - 0.588825, - 0.51916, - 0.39595800000000003, - 0.20794900000000002, - 0.012917999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.151341, - 0.34754599999999997, - 0.489064, - 0.571661, - 0.602927, - 0.581693, - 0.509258, - 0.385441, - 0.201382, - 0.016177, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.17056100000000002, - 0.383116, - 0.534518, - 0.6196240000000001, - 0.647965, - 0.620694, - 0.5450839999999999, - 0.41609199999999996, - 0.218616, - 0.018501, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.160016, - 0.363435, - 0.506499, - 0.590881, - 0.619033, - 0.595371, - 0.5193369999999999, - 0.395272, - 0.17350200000000002, - 0.008966, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07596800000000001, - 0.241744, - 0.49944700000000003, - 0.455626, - 0.50849, - 0.320034, - 0.23671999999999999, - 0.108423, - 0.16964400000000002, - 0.007622, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.14062799999999998, - 0.189454, - 0.4714, - 0.408132, - 0.430942, - 0.178798, - 0.504814, - 0.380819, - 0.19515000000000002, - 0.011653, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.14677199999999999, - 0.33975700000000003, - 0.47808999999999996, - 0.56304, - 0.502155, - 0.41929099999999997, - 0.36426, - 0.176563, - 0.067291, - 0.001113, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.14144800000000002, - 0.338646, - 0.485058, - 0.563625, - 0.5907749999999999, - 0.56692, - 0.494998, - 0.373198, - 0.191473, - 0.011846, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06433499999999999, - 0.231017, - 0.335453, - 0.5473830000000001, - 0.5823740000000001, - 0.562813, - 0.494665, - 0.37210899999999997, - 0.137154, - 0.007687, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.143591, - 0.349757, - 0.499045, - 0.5885560000000001, - 0.621398, - 0.597831, - 0.522635, - 0.39282999999999996, - 0.202256, - 0.008407, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0635, - 0.34009100000000003, - 0.486976, - 0.569596, - 0.603739, - 0.584653, - 0.515358, - 0.390985, - 0.20262, - 0.012493, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06314800000000001, - 0.33870100000000003, - 0.475841, - 0.549922, - 0.585296, - 0.5681620000000001, - 0.49886, - 0.374455, - 0.193519, - 0.011385, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06573999999999999, - 0.330195, - 0.468435, - 0.5446190000000001, - 0.56514, - 0.542883, - 0.482128, - 0.365375, - 0.191405, - 0.011933999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.05315400000000001, - 0.20283299999999999, - 0.33069299999999996, - 0.45095100000000005, - 0.440981, - 0.41150099999999995, - 0.458339, - 0.353757, - 0.183159, - 0.009366, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.053342, - 0.208784, - 0.453227, - 0.543203, - 0.5821689999999999, - 0.565639, - 0.501481, - 0.37741399999999997, - 0.196145, - 0.011381, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.120463, - 0.314512, - 0.46050599999999997, - 0.546219, - 0.583488, - 0.565106, - 0.49794499999999997, - 0.371956, - 0.094087, - 0.001062, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015433, - 0.131639, - 0.20315799999999998, - 0.012362, - 0.06952599999999999, - 0.02618, - 0.032836, - 0.08994100000000001, - 0.056783, - 0.010027, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10819100000000001, - 0.29938400000000004, - 0.364867, - 0.43964, - 0.42477699999999996, - 0.445087, - 0.31572100000000003, - 0.13458699999999998, - 0.020681, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.036859, - 0.08828100000000001, - 0.08282099999999999, - 0.130786, - 0.351127, - 0.336097, - 0.379638, - 0.27890699999999996, - 0.17896, - 0.005429000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10466800000000001, - 0.00507, - 0.457807, - 0.307574, - 0.372399, - 0.401781, - 0.200015, - 0.005702, - 0.190623, - 0.00495, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.107344, - 0.314921, - 0.476922, - 0.569009, - 0.607897, - 0.590093, - 0.520841, - 0.39121, - 0.197143, - 0.00566, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10728, - 0.303464, - 0.45329899999999995, - 0.5405570000000001, - 0.5793339999999999, - 0.45904700000000004, - 0.49782499999999996, - 0.266731, - 0.146287, - 0.008859, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.100965, - 0.30238400000000004, - 0.45943599999999996, - 0.547574, - 0.584808, - 0.566751, - 0.35568299999999997, - 0.372574, - 0.190185, - 0.009074, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.101205, - 0.307601, - 0.466706, - 0.561849, - 0.600324, - 0.5808289999999999, - 0.511471, - 0.383149, - 0.193938, - 0.009578, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.10023, - 0.31065699999999996, - 0.471208, - 0.515823, - 0.5230130000000001, - 0.575727, - 0.414311, - 0.380789, - 0.198157, - 0.010682, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.09473999999999999, - 0.29558, - 0.45243, - 0.546573, - 0.5901810000000001, - 0.5813189999999999, - 0.21108600000000002, - 0.141643, - 0.193686, - 0.009659000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08902800000000001, - 0.294024, - 0.357752, - 0.324027, - 0.582724, - 0.027924, - 0.19164599999999998, - 0.076059, - 0.10757, - 0.007665, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.092065, - 0.298016, - 0.46426, - 0.560408, - 0.6031369999999999, - 0.587172, - 0.515438, - 0.388034, - 0.20076, - 0.011305999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.091671, - 0.29983, - 0.463589, - 0.560024, - 0.5989779999999999, - 0.5815359999999999, - 0.5132749999999999, - 0.387034, - 0.20096899999999998, - 0.012029, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.085336, - 0.158522, - 0.444445, - 0.5304840000000001, - 0.559742, - 0.549946, - 0.48927499999999996, - 0.372391, - 0.194496, - 0.011257999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07577500000000001, - 0.17056100000000002, - 0.446291, - 0.40341899999999997, - 0.413005, - 0.38709899999999997, - 0.077582, - 0.285616, - 0.19878800000000002, - 0.006972000000000001, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08317400000000001, - 0.293077, - 0.46144, - 0.562736, - 0.607542, - 0.59468, - 0.527851, - 0.400974, - 0.211105, - 0.01591, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.085075, - 0.291786, - 0.45381299999999997, - 0.546158, - 0.583913, - 0.568297, - 0.504597, - 0.385032, - 0.20467500000000002, - 0.008119999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.061225999999999996, - 0.07191, - 0.43544, - 0.433187, - 0.44755700000000004, - 0.56165, - 0.45692099999999997, - 0.383309, - 0.2027, - 0.015527, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.079315, - 0.288259, - 0.45148, - 0.544455, - 0.582112, - 0.56726, - 0.502379, - 0.38518, - 0.206497, - 0.015752000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.075518, - 0.279343, - 0.43961500000000003, - 0.5184160000000001, - 0.5501860000000001, - 0.5440470000000001, - 0.485947, - 0.371241, - 0.19733799999999999, - 0.013205999999999999, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.030548, - 0.149894, - 0.250506, - 0.453637, - 0.57217, - 0.448015, - 0.516853, - 0.397627, - 0.212008, - 0.014402, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067276, - 0.263601, - 0.43258300000000005, - 0.526889, - 0.437587, - 0.5638, - 0.502197, - 0.383875, - 0.204656, - 0.016835999999999997, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.068893, - 0.269957, - 0.43371499999999996, - 0.5284310000000001, - 0.570666, - 0.558982, - 0.302652, - 0.32002600000000003, - 0.08913, - 0.003676, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.065553, - 0.262365, - 0.432004, - 0.527038, - 0.570743, - 0.560129, - 0.500919, - 0.343792, - 0.205208, - 0.011622, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.07253799999999999, - 0.285231, - 0.458283, - 0.559757, - 0.600951, - 0.475324, - 0.35981, - 0.27920100000000003, - 0.110406, - 0.006163, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.071065, - 0.282051, - 0.45328399999999996, - 0.549851, - 0.493921, - 0.5162519999999999, - 0.518815, - 0.402447, - 0.224782, - 0.024914000000000002, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.06468, - 0.26617799999999997, - 0.431159, - 0.41487999999999997, - 0.448781, - 0.41622899999999996, - 0.344767, - 0.25162799999999996, - 0.112171, - 0.006654, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.017875, - 0.099539, - 0.147631, - 0.280245, - 0.409477, - 0.459101, - 0.323611, - 0.179341, - 0.212308, - 0.015411, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.008386, - 0.179917, - 0.319699, - 0.281781, - 0.150833, - 0.14043799999999998, - 0.04218, - 0.096152, - 0.076027, - 0.004096, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.016027, - 0.007328, - 0.146984, - 0.081163, - 0.120132, - 0.048034999999999994, - 0.105957, - 0.293942, - 0.05697, - 0.022897999999999998, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.051933999999999994, - 0.040779, - 0.191251, - 0.051662, - 0.145851, - 0.147685, - 0.12615, - 0.089821, - 0.07617600000000001, - 0.005256, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052993000000000005, - 0.24642, - 0.416819, - 0.526861, - 0.574294, - 0.43489, - 0.371593, - 0.401469, - 0.167606, - 0.035059, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "electric_to_load_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.22, - 2.608, - 4.262, - 5.224, - 5.655, - 5.579, - 5.011, - 3.929, - 2.26, - 0.332, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.217, - 2.646, - 4.323, - 5.292, - 5.73, - 5.659, - 5.056, - 3.981, - 2.307, - 0.081, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.216, - 1.392, - 4.36, - 5.395, - 5.894, - 5.83, - 5.26, - 4.15, - 2.428, - 0.379, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.61, - 2.679, - 4.374, - 5.368, - 5.801, - 5.726, - 5.155, - 4.072, - 2.393, - 0.378, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.213, - 2.583, - 4.235, - 5.201, - 5.636, - 5.565, - 4.117, - 2.767, - 2.352, - 0.224, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.238, - 2.573, - 4.148, - 3.683, - 3.68, - 4.348, - 4.967, - 3.957, - 2.361, - 0.407, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.559, - 2.491, - 4.075, - 5.042, - 5.509, - 5.483, - 4.979, - 3.954, - 2.342, - 0.428, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.59, - 2.638, - 4.369, - 5.426, - 5.94, - 5.888, - 5.319, - 4.257, - 2.536, - 0.498, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.206, - 1.435, - 4.292, - 5.262, - 5.729, - 5.678, - 5.149, - 4.12, - 2.49, - 0.521, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.272, - 2.573, - 4.219, - 4.452, - 4.237, - 4.835, - 3.476, - 3.098, - 1.646, - 0.237, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.051, - 0.296, - 1.531, - 4.868, - 5.426, - 4.374, - 3.968, - 4.003, - 2.21, - 0.543, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.541, - 2.513, - 4.182, - 5.193, - 5.685, - 5.647, - 5.1, - 4.094, - 2.505, - 0.592, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.558, - 2.53, - 4.157, - 5.095, - 5.575, - 5.567, - 5.082, - 4.108, - 2.521, - 0.6, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.599, - 2.626, - 4.309, - 5.3, - 4.858, - 4.256, - 3.802, - 3.564, - 2.093, - 0.675, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.299, - 2.453, - 4.012, - 3.821, - 4.509, - 2.944, - 4.994, - 1.906, - 0.291, - 0.187, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.533, - 2.426, - 4.096, - 5.144, - 5.673, - 5.674, - 5.184, - 4.184, - 2.59, - 0.68, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.556, - 2.443, - 4.031, - 5.004, - 5.519, - 4.465, - 5.067, - 4.119, - 2.565, - 0.705, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.444, - 1.938, - 2.57, - 4.161, - 4.605, - 4.487, - 3.112, - 2.734, - 1.274, - 0.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.486, - 0.444, - 1.665, - 2.641, - 2.525, - 5.603, - 5.143, - 2.649, - 1.89, - 0.198, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.572, - 2.516, - 4.229, - 5.243, - 5.784, - 2.68, - 0.603, - 0.854, - 0.09, - 0.129, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.266, - 1.318, - 3.279, - 4.281, - 4.568, - 4.681, - 3.649, - 2.75, - 2.265, - 0.845, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.646, - 2.635, - 4.231, - 5.207, - 5.755, - 5.778, - 5.281, - 4.314, - 2.788, - 0.855, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.616, - 2.533, - 4.154, - 3.754, - 4.616, - 4.174, - 3.826, - 3.359, - 1.982, - 0.378, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.183, - 1.258, - 1.6, - 2.373, - 2.419, - 2.546, - 2.138, - 0.838, - 0.448, - 0.177, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.555, - 1.454, - 1.032, - 1.7, - 0.055, - 5.545, - 4.537, - 2.93, - 0.938, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.609, - 1.716, - 3.35, - 0.262, - 4.522, - 4.471, - 3.659, - 0.132, - 2.805, - 0.869, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.712, - 2.857, - 4.68, - 5.819, - 6.358, - 6.352, - 5.851, - 4.854, - 3.2, - 1.089, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.812, - 2.95, - 4.705, - 5.768, - 6.3, - 6.298, - 5.778, - 4.751, - 3.15, - 1.105, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.809, - 2.914, - 4.58, - 5.554, - 6.014, - 5.982, - 4.335, - 3.913, - 1.946, - 0.522, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.344, - 2.78, - 4.443, - 4.547, - 4.967, - 4.92, - 4.382, - 3.626, - 2.387, - 0.668, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.257, - 2.252, - 3.544, - 6.28, - 6.326, - 5.831, - 4.813, - 3.22, - 1.038, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.677, - 2.62, - 4.291, - 5.285, - 5.798, - 5.884, - 5.484, - 4.606, - 3.112, - 1.111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.862, - 3.016, - 4.74, - 4.851, - 5.172, - 4.907, - 5.749, - 4.757, - 3.259, - 1.27, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.919, - 3.04, - 4.706, - 5.709, - 6.215, - 6.201, - 5.699, - 4.753, - 3.266, - 1.295, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.88, - 2.933, - 4.582, - 5.617, - 6.123, - 6.126, - 5.623, - 4.677, - 3.207, - 1.263, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.33, - 1.69, - 2.946, - 4.481, - 4.921, - 4.581, - 3.882, - 3.569, - 2.108, - 0.649, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.896, - 2.899, - 4.432, - 5.463, - 6.023, - 6.093, - 4.812, - 3.902, - 2.7, - 0.942, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.591, - 2.22, - 3.463, - 4.33, - 5.232, - 4.32, - 4.001, - 3.1, - 2.54, - 0.907, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.539, - 1.531, - 2.971, - 3.204, - 2.755, - 4.337, - 4.456, - 2.766, - 2.197, - 0.657, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.868, - 2.143, - 3.424, - 3.792, - 4.712, - 1.57, - 1.733, - 1.008, - 0.833, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.232, - 1.506, - 0.857, - 1.842, - 4.294, - 4.003, - 4.301, - 3.565, - 2.616, - 0.491, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 2.979, - 4.661, - 5.736, - 6.334, - 6.398, - 5.914, - 4.972, - 3.444, - 1.422, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.969, - 2.956, - 3.167, - 5.67, - 6.263, - 6.306, - 5.91, - 4.943, - 3.429, - 0.152, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.054, - 3.14, - 4.825, - 2.86, - 6.44, - 6.497, - 6.051, - 5.093, - 2.867, - 1.51, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.134, - 3.267, - 4.948, - 6.057, - 6.636, - 6.657, - 6.174, - 5.179, - 3.665, - 1.609, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.535, - 3.32, - 4.897, - 5.876, - 6.391, - 6.401, - 5.898, - 4.945, - 3.496, - 1.556, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.173, - 3.209, - 4.803, - 5.824, - 6.36, - 6.403, - 5.942, - 4.989, - 3.534, - 1.555, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.177, - 3.238, - 4.853, - 5.903, - 6.423, - 6.419, - 5.938, - 4.962, - 2.977, - 0.51, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.503, - 2.179, - 2.958, - 3.875, - 3.398, - 2.196, - 4.002, - 3.837, - 2.773, - 1.196, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.287, - 0.228, - 0.302, - 1.024, - 5.04, - 4.217, - 5.061, - 3.629, - 1.646, - 0.03, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.29, - 3.342, - 4.884, - 5.885, - 6.426, - 6.475, - 6.046, - 5.145, - 3.686, - 1.717, - 0.037, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.277, - 3.269, - 4.726, - 5.693, - 6.297, - 6.413, - 6.038, - 5.157, - 3.733, - 1.752, - 0.048, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.299, - 1.322, - 1.354, - 0.957, - 4.366, - 5.138, - 4.688, - 3.623, - 2.702, - 1.195, - 0.024, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.502, - 3.77, - 5.46, - 6.563, - 7.165, - 7.222, - 6.754, - 5.739, - 4.177, - 1.978, - 0.085, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.525, - 3.708, - 5.292, - 6.288, - 6.682, - 6.58, - 6.037, - 5.183, - 3.879, - 1.895, - 0.089, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.48, - 3.577, - 5.193, - 6.29, - 6.86, - 6.894, - 4.971, - 1.135, - 0.365, - 0.577, - 0.085, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.483, - 3.58, - 5.117, - 6.172, - 6.739, - 6.792, - 6.333, - 5.399, - 3.952, - 1.9, - 0.097, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.049, - 3.792, - 5.47, - 5.315, - 5.515, - 7.221, - 6.732, - 5.714, - 0.466, - 0.551, - 0.029, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.697, - 3.939, - 5.579, - 6.651, - 7.23, - 7.266, - 6.793, - 5.792, - 4.268, - 0.078, - 0.103, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.294, - 2.478, - 2.243, - 3.083, - 4.408, - 0.768, - 4.257, - 2.742, - 0.888, - 1.081, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.663, - 2.365, - 3.112, - 3.949, - 4.951, - 4.282, - 4.0, - 2.829, - 1.937, - 0.85, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.012, - 0.926, - 2.404, - 3.808, - 5.261, - 5.44, - 5.19, - 5.786, - 4.325, - 2.577, - 1.064, - 0.049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059, - 1.699, - 3.743, - 3.844, - 5.077, - 5.447, - 5.634, - 4.355, - 3.776, - 3.889, - 1.947, - 0.153, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.076, - 1.764, - 3.769, - 5.108, - 6.043, - 4.558, - 6.602, - 6.195, - 4.419, - 3.886, - 1.128, - 0.161, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.033, - 1.0, - 2.393, - 3.201, - 6.102, - 6.602, - 5.4, - 6.272, - 5.32, - 3.896, - 1.973, - 0.179, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.095, - 1.889, - 4.008, - 5.515, - 5.401, - 5.731, - 5.213, - 5.074, - 4.705, - 3.3, - 2.121, - 0.086, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.124, - 2.044, - 4.199, - 5.729, - 6.705, - 7.142, - 7.079, - 6.572, - 5.618, - 4.176, - 1.745, - 0.181, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.079, - 1.559, - 4.031, - 5.476, - 6.405, - 6.771, - 6.584, - 5.99, - 5.203, - 3.141, - 1.681, - 0.226, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.146, - 2.003, - 3.138, - 5.465, - 6.439, - 6.908, - 6.877, - 6.423, - 5.451, - 4.041, - 2.093, - 0.259, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.163, - 1.361, - 2.962, - 5.722, - 5.556, - 5.467, - 5.934, - 4.971, - 4.331, - 2.827, - 1.64, - 0.218, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.198, - 2.122, - 4.213, - 5.713, - 6.713, - 7.175, - 7.132, - 6.587, - 5.604, - 4.166, - 2.177, - 0.3, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.225, - 2.128, - 4.17, - 5.623, - 6.607, - 7.087, - 7.104, - 6.609, - 5.623, - 4.2, - 2.223, - 0.321, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.269, - 2.216, - 4.223, - 5.585, - 6.428, - 6.853, - 6.842, - 6.422, - 5.537, - 4.154, - 2.215, - 0.329, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.29, - 2.24, - 4.312, - 5.758, - 6.749, - 7.192, - 7.116, - 6.618, - 5.602, - 4.168, - 2.225, - 0.338, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.307, - 2.168, - 4.108, - 5.352, - 6.216, - 6.548, - 6.688, - 6.34, - 5.499, - 4.174, - 2.275, - 0.357, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.358, - 2.384, - 4.45, - 5.899, - 6.893, - 7.383, - 7.36, - 6.847, - 5.877, - 3.942, - 1.763, - 0.308, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.396, - 2.468, - 4.581, - 6.054, - 7.0, - 7.414, - 7.303, - 6.735, - 5.786, - 4.362, - 2.402, - 0.406, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.415, - 2.497, - 4.579, - 6.012, - 6.953, - 7.364, - 7.253, - 6.647, - 5.64, - 4.251, - 2.361, - 0.411, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.227, - 1.5, - 2.773, - 5.281, - 5.882, - 5.685, - 5.631, - 5.329, - 4.043, - 4.178, - 2.311, - 0.41, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.442, - 2.371, - 4.272, - 5.626, - 6.524, - 6.993, - 6.998, - 6.554, - 5.592, - 4.178, - 2.265, - 0.404, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.465, - 2.334, - 4.196, - 5.467, - 6.17, - 6.548, - 6.706, - 6.413, - 5.577, - 4.212, - 2.312, - 0.423, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.505, - 2.43, - 3.305, - 4.298, - 6.129, - 5.83, - 5.705, - 5.137, - 4.737, - 4.066, - 1.711, - 0.341, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.5, - 2.376, - 3.269, - 4.954, - 6.56, - 6.935, - 6.827, - 6.3, - 4.023, - 3.604, - 1.772, - 0.429, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.527, - 2.412, - 4.226, - 5.557, - 6.626, - 7.122, - 7.13, - 5.863, - 5.63, - 4.253, - 2.33, - 0.454, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.597, - 2.628, - 4.605, - 6.054, - 7.051, - 7.536, - 1.803, - 4.366, - 4.338, - 2.823, - 1.094, - 0.485, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.616, - 2.661, - 4.603, - 5.975, - 6.816, - 7.21, - 7.255, - 6.778, - 5.811, - 4.369, - 1.162, - 0.496, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.638, - 2.582, - 4.395, - 5.646, - 6.429, - 5.988, - 5.98, - 5.476, - 5.017, - 4.078, - 2.283, - 0.491, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.652, - 1.592, - 3.228, - 5.599, - 6.621, - 6.811, - 5.368, - 5.617, - 5.605, - 3.923, - 1.641, - 0.356, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.767, - 2.98, - 4.966, - 6.374, - 7.301, - 7.735, - 7.652, - 7.081, - 6.079, - 4.599, - 2.609, - 0.563, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.755, - 2.804, - 4.686, - 6.063, - 7.024, - 7.497, - 7.479, - 7.028, - 6.041, - 4.563, - 0.047, - 0.024, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.837, - 3.067, - 5.077, - 6.506, - 7.462, - 7.922, - 7.824, - 7.266, - 6.2, - 4.701, - 2.665, - 0.595, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.855, - 3.012, - 4.907, - 6.257, - 7.098, - 7.439, - 7.3, - 5.676, - 5.838, - 4.443, - 2.564, - 0.593, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.841, - 2.833, - 3.834, - 4.69, - 6.289, - 6.767, - 6.89, - 6.53, - 5.685, - 4.327, - 2.498, - 0.587, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.886, - 2.914, - 3.241, - 5.076, - 6.859, - 7.344, - 7.364, - 6.896, - 5.945, - 4.54, - 2.607, - 0.626, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.947, - 3.098, - 5.04, - 6.458, - 7.343, - 7.775, - 7.747, - 7.215, - 6.186, - 2.949, - 2.645, - 0.656, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.005, - 3.161, - 5.091, - 6.494, - 7.44, - 7.812, - 7.717, - 7.138, - 6.101, - 4.625, - 2.657, - 0.674, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.035, - 3.183, - 5.034, - 6.348, - 7.144, - 7.437, - 7.274, - 6.743, - 5.843, - 4.523, - 2.653, - 0.677, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.759, - 3.034, - 4.741, - 6.02, - 6.883, - 7.32, - 7.283, - 6.8, - 5.828, - 4.406, - 2.597, - 0.667, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.046, - 3.066, - 4.783, - 6.09, - 6.948, - 7.402, - 7.409, - 6.941, - 5.944, - 4.484, - 2.367, - 0.611, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.116, - 3.21, - 4.985, - 6.287, - 7.206, - 7.649, - 7.64, - 7.102, - 6.103, - 4.663, - 2.748, - 0.71, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004, - 3.203, - 3.016, - 6.415, - 1.444, - 4.144, - 7.73, - 7.18, - 5.25, - 3.248, - 0.588, - 0.025, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.152, - 3.236, - 3.018, - 6.401, - 7.295, - 7.7, - 6.494, - 7.033, - 3.593, - 1.82, - 1.564, - 0.351, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.004, - 3.181, - 5.076, - 1.59, - 0.2, - 0.644, - 0.306, - 1.173, - 1.16, - 2.116, - 0.762, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.819, - 3.504, - 5.369, - 6.721, - 7.533, - 7.912, - 7.787, - 7.197, - 6.17, - 4.746, - 2.815, - 0.757, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.019, - 1.226, - 3.293, - 4.982, - 6.137, - 6.73, - 6.946, - 7.016, - 6.685, - 5.852, - 4.548, - 2.699, - 0.751, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.024, - 1.239, - 3.269, - 4.915, - 6.096, - 6.829, - 7.099, - 6.935, - 6.522, - 5.703, - 4.424, - 2.666, - 0.753, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.028, - 1.25, - 3.26, - 4.828, - 5.89, - 6.507, - 6.833, - 6.942, - 6.626, - 5.777, - 4.463, - 2.692, - 0.75, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.051, - 0.992, - 3.257, - 4.897, - 5.103, - 5.765, - 7.17, - 7.086, - 6.641, - 5.75, - 4.438, - 2.128, - 0.755, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.046, - 1.302, - 3.335, - 4.977, - 6.101, - 6.746, - 6.961, - 6.725, - 6.14, - 5.307, - 4.145, - 2.484, - 0.744, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037, - 1.27, - 3.128, - 4.774, - 5.961, - 6.829, - 7.054, - 6.805, - 6.174, - 5.237, - 4.152, - 2.579, - 0.751, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.042, - 1.341, - 3.311, - 4.846, - 5.927, - 6.563, - 6.78, - 6.691, - 6.288, - 5.509, - 4.295, - 2.646, - 0.779, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043, - 1.355, - 3.254, - 4.723, - 5.897, - 6.742, - 7.113, - 7.088, - 6.642, - 5.738, - 4.402, - 2.715, - 0.811, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.057, - 1.427, - 3.424, - 5.032, - 6.189, - 6.978, - 7.359, - 7.288, - 6.905, - 5.971, - 4.631, - 2.862, - 0.865, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.078, - 0.785, - 3.373, - 4.813, - 6.197, - 5.985, - 3.665, - 4.27, - 4.543, - 1.705, - 1.564, - 1.003, - 0.265, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.937, - 2.476, - 3.117, - 3.65, - 1.812, - 4.553, - 5.765, - 5.14, - 3.102, - 3.402, - 2.059, - 0.853, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.081, - 1.484, - 3.493, - 5.137, - 6.398, - 7.22, - 7.61, - 7.549, - 3.641, - 4.521, - 1.964, - 1.156, - 0.201, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.098, - 1.565, - 3.623, - 5.256, - 6.445, - 7.211, - 7.497, - 7.295, - 6.736, - 5.777, - 4.501, - 2.759, - 0.885, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.112, - 1.533, - 3.522, - 5.152, - 6.367, - 7.179, - 7.374, - 7.085, - 6.465, - 5.517, - 4.321, - 2.738, - 0.889, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.129, - 1.551, - 3.496, - 5.075, - 6.209, - 6.866, - 7.034, - 6.779, - 6.293, - 5.494, - 4.323, - 2.662, - 0.874, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.135, - 1.536, - 3.4, - 4.793, - 5.923, - 6.755, - 7.155, - 7.131, - 6.68, - 5.759, - 4.426, - 2.862, - 0.924, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.136, - 1.611, - 3.609, - 5.178, - 6.298, - 6.981, - 7.135, - 6.779, - 6.229, - 5.613, - 4.448, - 2.776, - 0.909, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.15, - 1.583, - 3.511, - 5.033, - 6.098, - 6.746, - 6.902, - 6.64, - 6.283, - 5.601, - 4.405, - 2.731, - 0.905, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.15, - 1.532, - 3.444, - 4.953, - 6.026, - 6.71, - 6.897, - 6.731, - 6.19, - 5.412, - 4.235, - 2.648, - 0.902, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.17, - 1.544, - 3.332, - 4.661, - 5.684, - 6.477, - 6.859, - 6.864, - 6.451, - 5.622, - 4.374, - 2.73, - 0.932, - 0.008, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.187, - 1.642, - 3.548, - 4.834, - 5.449, - 6.363, - 6.368, - 7.325, - 6.831, - 4.832, - 4.069, - 2.528, - 0.906, - 0.015, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.227, - 1.608, - 3.008, - 4.679, - 6.276, - 7.006, - 7.414, - 2.812, - 3.329, - 6.101, - 4.766, - 2.157, - 1.068, - 0.018, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.266, - 1.714, - 3.674, - 2.687, - 6.52, - 7.342, - 7.717, - 6.81, - 3.485, - 0.789, - 4.021, - 2.183, - 1.059, - 0.029, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.229, - 1.795, - 3.806, - 5.381, - 4.701, - 7.273, - 7.524, - 7.361, - 4.891, - 4.811, - 4.499, - 2.811, - 0.996, - 0.026, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.245, - 1.662, - 3.448, - 4.894, - 6.003, - 6.758, - 7.159, - 7.127, - 6.686, - 5.754, - 4.46, - 2.779, - 1.021, - 0.021, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.287, - 1.7, - 3.521, - 5.044, - 6.222, - 7.067, - 7.461, - 7.405, - 6.874, - 5.968, - 4.634, - 2.91, - 1.044, - 0.038, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.285, - 1.748, - 3.611, - 5.094, - 6.261, - 7.06, - 7.431, - 7.368, - 6.895, - 6.006, - 4.702, - 2.992, - 1.075, - 0.044, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.267, - 1.804, - 3.73, - 5.253, - 6.401, - 7.267, - 7.626, - 7.531, - 7.018, - 6.091, - 4.768, - 3.027, - 1.092, - 0.03, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.281, - 2.007, - 4.11, - 5.69, - 6.809, - 7.471, - 7.754, - 7.597, - 7.03, - 6.149, - 4.846, - 3.107, - 1.149, - 0.04, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.313, - 1.887, - 3.877, - 5.407, - 6.54, - 7.285, - 7.635, - 7.567, - 7.062, - 6.147, - 4.827, - 3.086, - 1.156, - 0.052, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.348, - 1.853, - 3.812, - 5.4, - 6.628, - 7.419, - 7.763, - 6.81, - 1.601, - 4.682, - 4.811, - 3.036, - 1.14, - 0.053, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.336, - 1.828, - 3.72, - 5.245, - 6.393, - 7.144, - 7.511, - 7.447, - 7.01, - 6.09, - 3.884, - 2.628, - 1.036, - 0.074, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.326, - 1.825, - 3.744, - 5.344, - 6.584, - 7.404, - 7.775, - 7.721, - 7.173, - 6.252, - 4.917, - 3.167, - 1.198, - 0.049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.3, - 1.902, - 3.857, - 5.338, - 6.353, - 6.896, - 7.094, - 6.965, - 6.578, - 5.762, - 4.579, - 2.988, - 1.154, - 0.046, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.305, - 1.927, - 3.885, - 5.36, - 6.423, - 7.069, - 7.274, - 7.081, - 6.521, - 5.593, - 4.467, - 2.983, - 1.162, - 0.05, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.308, - 1.877, - 3.753, - 5.174, - 6.237, - 6.82, - 6.965, - 6.698, - 6.125, - 5.499, - 4.491, - 2.948, - 1.148, - 0.053, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.304, - 1.829, - 3.589, - 4.919, - 6.034, - 6.8, - 7.18, - 7.162, - 6.728, - 5.874, - 4.632, - 3.009, - 1.156, - 0.048, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.305, - 1.883, - 3.71, - 5.016, - 5.992, - 6.618, - 6.845, - 6.764, - 6.327, - 5.59, - 4.483, - 2.929, - 1.157, - 0.056, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.321, - 1.794, - 3.549, - 4.923, - 5.987, - 6.767, - 7.113, - 7.104, - 6.677, - 5.849, - 4.641, - 3.057, - 1.205, - 0.057, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.314, - 1.894, - 2.779, - 5.231, - 6.388, - 5.687, - 7.47, - 7.361, - 6.884, - 6.04, - 4.758, - 3.12, - 1.228, - 0.067, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.356, - 1.943, - 3.88, - 5.397, - 6.56, - 7.327, - 7.669, - 7.588, - 7.121, - 6.22, - 4.92, - 3.231, - 1.284, - 0.074, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.399, - 1.967, - 3.859, - 5.374, - 6.551, - 7.364, - 7.681, - 7.595, - 7.091, - 6.179, - 4.888, - 3.198, - 1.288, - 0.092, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.393, - 1.92, - 3.733, - 5.107, - 6.145, - 6.881, - 7.149, - 7.045, - 6.647, - 5.85, - 4.687, - 3.118, - 1.263, - 0.093, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.357, - 1.903, - 3.691, - 5.065, - 6.099, - 6.786, - 7.02, - 6.875, - 6.453, - 5.686, - 4.54, - 2.999, - 1.234, - 0.094, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.367, - 1.874, - 3.593, - 4.942, - 6.03, - 6.776, - 7.11, - 7.059, - 5.284, - 5.793, - 4.584, - 2.729, - 1.21, - 0.109, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.351, - 1.437, - 3.658, - 5.024, - 6.059, - 6.789, - 7.154, - 7.089, - 6.661, - 5.842, - 4.631, - 3.08, - 1.273, - 0.111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.34, - 1.339, - 2.631, - 2.69, - 5.307, - 6.036, - 5.146, - 3.606, - 1.252, - 4.145, - 1.955, - 3.08, - 1.225, - 0.128, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.35, - 1.744, - 3.519, - 5.041, - 6.018, - 6.69, - 7.112, - 6.487, - 4.86, - 5.023, - 4.206, - 2.442, - 1.049, - 0.136, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.345, - 1.405, - 2.757, - 2.3, - 4.778, - 5.525, - 6.216, - 6.096, - 5.705, - 2.951, - 2.595, - 1.871, - 0.764, - 0.135, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.366, - 1.783, - 3.544, - 4.924, - 5.991, - 6.607, - 6.698, - 6.407, - 5.953, - 5.318, - 4.308, - 2.856, - 1.253, - 0.142, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.372, - 1.813, - 3.54, - 4.882, - 5.944, - 6.679, - 7.044, - 7.038, - 6.632, - 5.82, - 4.621, - 3.115, - 1.328, - 0.144, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.241, - 0.827, - 1.936, - 1.405, - 1.71, - 5.694, - 4.893, - 7.138, - 6.813, - 4.741, - 4.76, - 3.136, - 1.367, - 0.157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.401, - 1.901, - 3.763, - 5.262, - 6.425, - 7.194, - 7.568, - 7.516, - 7.061, - 6.172, - 4.904, - 3.275, - 1.404, - 0.17, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.409, - 2.093, - 4.074, - 5.6, - 6.831, - 7.614, - 7.965, - 7.892, - 7.347, - 6.435, - 5.135, - 3.497, - 1.514, - 0.162, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.393, - 2.123, - 4.159, - 5.732, - 6.917, - 7.656, - 7.875, - 7.363, - 7.222, - 6.313, - 5.04, - 3.406, - 1.48, - 0.153, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.38, - 2.023, - 3.923, - 5.37, - 6.388, - 6.995, - 7.225, - 7.04, - 6.509, - 5.633, - 4.548, - 3.169, - 1.403, - 0.169, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.386, - 1.965, - 3.789, - 5.179, - 6.206, - 6.791, - 6.98, - 6.843, - 6.463, - 5.769, - 4.67, - 3.21, - 1.416, - 0.164, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.365, - 1.87, - 3.638, - 5.045, - 6.169, - 6.946, - 7.33, - 7.321, - 6.925, - 6.094, - 4.882, - 3.334, - 1.465, - 0.168, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.385, - 2.034, - 3.796, - 5.366, - 6.289, - 7.036, - 7.642, - 7.588, - 7.109, - 6.248, - 4.983, - 3.392, - 1.485, - 0.186, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.396, - 1.921, - 3.865, - 5.312, - 6.438, - 7.196, - 7.544, - 7.488, - 7.018, - 6.144, - 4.9, - 3.342, - 1.461, - 0.18, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.384, - 1.96, - 3.8, - 5.164, - 6.108, - 6.618, - 6.696, - 6.576, - 6.352, - 5.759, - 4.673, - 3.225, - 1.431, - 0.198, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.383, - 1.885, - 3.623, - 4.916, - 6.01, - 6.759, - 7.119, - 7.103, - 6.694, - 5.893, - 4.647, - 3.187, - 1.369, - 0.181, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.371, - 1.883, - 3.707, - 5.15, - 6.287, - 7.045, - 7.403, - 7.367, - 6.929, - 6.088, - 4.873, - 3.344, - 1.481, - 0.19, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.396, - 1.901, - 3.711, - 5.115, - 6.154, - 6.748, - 6.933, - 6.831, - 6.484, - 5.796, - 4.697, - 3.253, - 1.458, - 0.209, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.383, - 1.881, - 3.707, - 5.107, - 6.094, - 6.618, - 6.821, - 6.738, - 6.419, - 5.76, - 4.66, - 3.223, - 1.462, - 0.21, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.414, - 1.843, - 3.584, - 4.914, - 5.922, - 6.618, - 6.991, - 6.992, - 6.602, - 5.758, - 4.658, - 3.214, - 1.455, - 0.205, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.374, - 1.83, - 3.587, - 4.955, - 5.969, - 6.627, - 6.897, - 6.88, - 6.538, - 5.782, - 4.654, - 3.191, - 1.446, - 0.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.362, - 1.851, - 3.647, - 5.033, - 6.107, - 6.826, - 7.183, - 7.15, - 6.734, - 5.931, - 4.766, - 3.279, - 1.478, - 0.199, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.343, - 1.821, - 3.599, - 4.951, - 5.987, - 6.708, - 7.065, - 7.061, - 6.676, - 5.893, - 4.74, - 3.28, - 1.49, - 0.2, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.333, - 1.812, - 3.566, - 4.901, - 5.924, - 6.467, - 6.923, - 6.987, - 6.623, - 5.868, - 4.589, - 3.142, - 1.462, - 0.191, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.322, - 1.574, - 3.055, - 4.407, - 5.912, - 6.61, - 6.862, - 6.848, - 5.785, - 5.257, - 4.121, - 2.533, - 1.369, - 0.204, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.316, - 1.518, - 3.189, - 4.542, - 5.625, - 6.798, - 6.934, - 6.745, - 6.644, - 6.022, - 4.845, - 3.36, - 1.523, - 0.197, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.322, - 1.726, - 3.356, - 4.578, - 5.606, - 6.31, - 6.672, - 6.654, - 6.265, - 3.591, - 2.21, - 3.028, - 1.411, - 0.216, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.319, - 1.708, - 3.42, - 4.786, - 5.827, - 6.563, - 6.925, - 6.935, - 6.551, - 5.784, - 4.637, - 3.201, - 1.471, - 0.216, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.328, - 1.811, - 3.653, - 5.131, - 6.301, - 7.113, - 7.492, - 7.443, - 6.993, - 6.151, - 4.925, - 3.398, - 1.547, - 0.206, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.359, - 1.884, - 3.762, - 5.16, - 6.138, - 6.689, - 6.979, - 6.997, - 6.687, - 5.996, - 4.873, - 3.39, - 1.542, - 0.203, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.305, - 1.801, - 3.602, - 4.911, - 5.871, - 6.593, - 7.008, - 7.062, - 6.718, - 5.973, - 4.829, - 3.4, - 1.553, - 0.169, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.275, - 1.868, - 3.757, - 5.159, - 6.167, - 6.736, - 7.069, - 7.072, - 6.707, - 5.986, - 4.867, - 3.4, - 1.563, - 0.174, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.269, - 1.87, - 3.786, - 5.225, - 6.293, - 6.969, - 7.325, - 7.301, - 6.903, - 6.125, - 4.969, - 3.465, - 1.586, - 0.17, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.266, - 1.852, - 3.741, - 5.105, - 5.995, - 6.524, - 6.802, - 6.797, - 6.461, - 5.776, - 4.729, - 3.309, - 1.521, - 0.16, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.256, - 1.793, - 3.583, - 4.816, - 5.608, - 6.277, - 5.472, - 6.693, - 6.117, - 5.434, - 4.369, - 3.111, - 1.432, - 0.206, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.285, - 1.598, - 3.275, - 4.591, - 5.601, - 6.286, - 6.614, - 6.592, - 5.614, - 5.618, - 4.523, - 3.091, - 1.409, - 0.209, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.319, - 1.527, - 3.209, - 4.542, - 5.573, - 6.29, - 6.682, - 5.861, - 5.576, - 5.596, - 4.499, - 3.081, - 1.415, - 0.228, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.272, - 1.617, - 3.409, - 4.845, - 5.951, - 6.723, - 7.096, - 7.079, - 6.733, - 5.955, - 4.792, - 3.31, - 1.495, - 0.169, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.239, - 1.679, - 3.518, - 4.986, - 6.119, - 6.88, - 7.262, - 7.253, - 6.844, - 6.037, - 4.87, - 3.405, - 1.548, - 0.167, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.253, - 1.641, - 3.422, - 4.82, - 5.877, - 6.584, - 6.972, - 6.967, - 6.624, - 5.833, - 4.635, - 3.178, - 1.46, - 0.229, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.215, - 0.803, - 2.65, - 1.954, - 5.098, - 5.286, - 4.745, - 5.133, - 4.841, - 2.78, - 3.61, - 2.614, - 0.968, - 0.192, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.283, - 1.625, - 3.43, - 4.962, - 6.162, - 7.028, - 7.406, - 7.35, - 6.958, - 6.175, - 4.984, - 3.451, - 1.564, - 0.161, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.216, - 1.671, - 3.549, - 5.006, - 6.079, - 6.797, - 7.162, - 7.145, - 6.784, - 6.032, - 4.882, - 3.369, - 1.515, - 0.151, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.199, - 1.669, - 3.52, - 4.938, - 5.956, - 6.626, - 7.007, - 6.985, - 6.623, - 5.873, - 4.74, - 3.261, - 1.46, - 0.157, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.059, - 0.714, - 2.59, - 3.595, - 4.432, - 3.088, - 3.983, - 4.003, - 4.577, - 5.361, - 4.351, - 3.109, - 1.392, - 0.167, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08, - 0.927, - 3.185, - 4.56, - 5.611, - 6.378, - 6.748, - 6.752, - 6.361, - 5.636, - 4.52, - 3.062, - 1.379, - 0.165, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.195, - 1.515, - 3.293, - 4.709, - 5.811, - 6.569, - 6.955, - 6.948, - 6.588, - 5.831, - 4.699, - 3.238, - 1.438, - 0.147, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.178, - 1.579, - 3.441, - 4.893, - 5.97, - 6.694, - 7.075, - 7.06, - 6.659, - 5.893, - 4.748, - 3.263, - 1.447, - 0.146, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.171, - 1.591, - 3.472, - 4.948, - 6.07, - 6.823, - 7.217, - 7.192, - 6.79, - 5.985, - 4.804, - 3.3, - 1.45, - 0.127, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.161, - 1.567, - 3.413, - 4.876, - 6.002, - 6.807, - 7.218, - 7.219, - 6.836, - 6.057, - 4.89, - 3.381, - 1.489, - 0.122, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.155, - 1.591, - 3.448, - 4.883, - 6.01, - 6.802, - 7.196, - 7.187, - 6.817, - 6.004, - 4.824, - 3.328, - 1.461, - 0.124, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.16, - 1.541, - 3.351, - 4.806, - 5.921, - 6.685, - 7.063, - 7.023, - 6.667, - 5.871, - 4.694, - 3.196, - 1.389, - 0.13, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.164, - 1.434, - 3.178, - 4.575, - 5.652, - 6.399, - 6.787, - 6.755, - 6.376, - 5.601, - 4.445, - 3.015, - 1.269, - 0.084, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021, - 0.575, - 0.638, - 0.589, - 5.466, - 5.488, - 6.362, - 0.551, - 1.722, - 1.475, - 0.194, - 1.14, - 0.143, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.153, - 1.375, - 3.111, - 4.479, - 5.565, - 6.359, - 6.764, - 6.78, - 6.418, - 5.681, - 4.555, - 3.095, - 1.327, - 0.116, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.133, - 1.439, - 3.237, - 4.685, - 5.791, - 6.568, - 6.968, - 6.962, - 6.617, - 5.828, - 4.662, - 3.116, - 1.33, - 0.114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.128, - 1.413, - 3.238, - 4.691, - 5.783, - 6.503, - 6.89, - 6.916, - 6.551, - 5.796, - 4.661, - 3.139, - 1.338, - 0.105, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.131, - 1.37, - 3.146, - 4.579, - 5.672, - 6.451, - 6.841, - 6.832, - 6.491, - 5.717, - 4.558, - 3.057, - 1.287, - 0.095, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.13, - 1.383, - 3.167, - 4.615, - 5.716, - 6.459, - 6.829, - 6.828, - 6.476, - 5.718, - 4.568, - 3.054, - 1.279, - 0.093, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.114, - 1.364, - 3.181, - 4.639, - 5.727, - 6.437, - 6.816, - 6.799, - 6.384, - 5.645, - 4.525, - 3.056, - 1.271, - 0.077, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.111, - 1.366, - 3.151, - 4.598, - 5.679, - 6.43, - 6.818, - 6.817, - 6.482, - 5.703, - 4.547, - 3.04, - 1.256, - 0.074, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.102, - 1.35, - 3.088, - 4.521, - 5.584, - 6.338, - 6.715, - 6.699, - 6.291, - 5.508, - 4.358, - 2.931, - 1.217, - 0.068, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.487, - 0.081, - 3.773, - 5.667, - 5.713, - 5.981, - 6.055, - 6.37, - 5.615, - 4.455, - 2.982, - 1.223, - 0.064, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.098, - 1.304, - 3.074, - 4.506, - 5.589, - 6.367, - 6.802, - 6.822, - 6.441, - 5.689, - 4.532, - 3.048, - 1.233, - 0.055, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.079, - 1.348, - 3.165, - 4.607, - 5.658, - 6.388, - 6.727, - 6.738, - 6.401, - 5.651, - 4.499, - 2.987, - 1.193, - 0.049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.079, - 1.31, - 3.098, - 4.55, - 5.646, - 6.374, - 6.767, - 6.74, - 5.057, - 5.571, - 4.399, - 2.91, - 1.173, - 0.049, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.077, - 1.276, - 3.061, - 4.564, - 5.73, - 6.557, - 6.992, - 7.025, - 6.601, - 5.802, - 4.596, - 3.075, - 1.212, - 0.046, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.074, - 1.381, - 3.345, - 4.969, - 6.183, - 7.035, - 7.434, - 7.382, - 6.958, - 6.09, - 4.819, - 3.176, - 1.231, - 0.03, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.052, - 1.371, - 3.308, - 4.864, - 6.029, - 6.803, - 7.22, - 7.213, - 6.782, - 5.946, - 4.708, - 3.113, - 1.199, - 0.031, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.051, - 1.369, - 3.321, - 4.848, - 5.963, - 6.679, - 7.109, - 7.14, - 6.75, - 5.939, - 4.727, - 3.133, - 1.198, - 0.026, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.045, - 1.34, - 3.272, - 4.809, - 5.963, - 6.745, - 7.172, - 7.198, - 6.776, - 5.961, - 4.723, - 3.117, - 1.187, - 0.027, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.039, - 1.328, - 3.233, - 4.744, - 5.899, - 6.688, - 7.114, - 7.138, - 6.727, - 5.915, - 4.695, - 3.08, - 1.151, - 0.04, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.044, - 1.306, - 3.207, - 4.786, - 6.005, - 6.81, - 7.215, - 7.174, - 6.77, - 5.916, - 4.67, - 3.046, - 1.119, - 0.035, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.038, - 1.234, - 3.08, - 4.583, - 5.72, - 6.475, - 6.838, - 6.81, - 6.415, - 5.579, - 4.384, - 2.861, - 1.035, - 0.028, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.037, - 1.212, - 3.041, - 4.536, - 5.614, - 6.362, - 6.755, - 6.756, - 6.392, - 5.599, - 4.41, - 2.839, - 1.01, - 0.023, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.032, - 1.182, - 2.987, - 4.448, - 5.345, - 5.165, - 6.725, - 6.696, - 5.369, - 4.199, - 3.83, - 2.542, - 0.876, - 0.012, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.027, - 1.132, - 2.963, - 4.442, - 5.54, - 6.259, - 6.64, - 6.636, - 6.243, - 5.457, - 4.249, - 2.62, - 0.928, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.023, - 1.136, - 2.933, - 4.386, - 5.46, - 6.124, - 6.496, - 6.486, - 6.092, - 5.307, - 4.106, - 2.535, - 0.887, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035, - 1.114, - 2.903, - 4.375, - 5.48, - 6.28, - 6.668, - 6.676, - 6.29, - 5.479, - 4.262, - 2.662, - 0.908, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.035, - 1.139, - 2.969, - 4.507, - 5.655, - 6.455, - 6.857, - 6.86, - 6.438, - 5.605, - 4.392, - 2.77, - 0.914, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.041, - 0.991, - 3.075, - 4.656, - 5.268, - 6.635, - 6.437, - 6.996, - 6.57, - 5.705, - 4.455, - 2.796, - 0.907, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.031, - 1.203, - 3.146, - 4.696, - 5.815, - 6.55, - 6.948, - 6.952, - 6.499, - 5.66, - 4.411, - 2.745, - 0.87, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.025, - 1.161, - 3.049, - 4.605, - 5.73, - 6.45, - 6.788, - 6.756, - 6.339, - 5.5, - 4.276, - 2.631, - 0.822, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.02, - 1.129, - 3.026, - 4.6, - 5.748, - 6.515, - 6.876, - 6.802, - 6.395, - 5.523, - 4.254, - 2.622, - 0.803, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.021, - 1.147, - 3.112, - 4.741, - 5.945, - 6.723, - 7.122, - 7.069, - 6.601, - 5.716, - 4.432, - 2.731, - 0.82, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.015, - 1.13, - 3.027, - 4.549, - 5.702, - 6.481, - 6.861, - 6.822, - 6.42, - 5.55, - 4.285, - 2.62, - 0.771, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.009, - 1.035, - 2.81, - 4.366, - 5.551, - 6.343, - 6.735, - 6.721, - 5.453, - 4.691, - 3.557, - 2.408, - 0.706, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.991, - 2.724, - 3.961, - 4.913, - 6.183, - 5.741, - 5.412, - 5.327, - 1.556, - 0.963, - 2.122, - 0.68, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.986, - 2.785, - 4.289, - 5.427, - 6.234, - 6.628, - 6.601, - 6.192, - 5.35, - 4.084, - 2.438, - 0.662, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.009, - 2.845, - 4.278, - 5.321, - 6.086, - 6.487, - 6.483, - 6.086, - 5.259, - 4.044, - 2.395, - 0.631, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.002, - 2.807, - 4.18, - 5.187, - 5.86, - 6.159, - 6.132, - 5.788, - 3.638, - 2.377, - 2.093, - 0.602, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.394, - 2.751, - 4.237, - 5.359, - 6.182, - 6.578, - 6.541, - 3.059, - 0.324, - 3.932, - 0.587, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.925, - 2.619, - 4.03, - 5.085, - 5.893, - 6.228, - 6.208, - 5.833, - 4.435, - 3.344, - 2.365, - 0.582, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.021, - 2.902, - 4.375, - 5.505, - 6.265, - 6.664, - 6.66, - 6.228, - 5.359, - 4.066, - 2.338, - 0.559, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.011, - 2.92, - 4.335, - 5.282, - 6.064, - 6.445, - 1.812, - 0.201, - 0.157, - 3.974, - 2.269, - 0.527, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.961, - 2.811, - 4.334, - 5.477, - 6.226, - 6.574, - 6.512, - 2.344, - 1.95, - 0.473, - 1.586, - 0.509, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.937, - 2.813, - 4.295, - 5.416, - 6.148, - 6.463, - 6.388, - 5.927, - 5.042, - 3.795, - 2.11, - 0.476, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.915, - 2.725, - 4.237, - 5.314, - 6.028, - 6.328, - 6.246, - 5.78, - 4.932, - 1.536, - 2.059, - 0.191, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.905, - 2.705, - 4.254, - 5.357, - 6.138, - 6.502, - 6.47, - 6.024, - 5.128, - 3.824, - 2.101, - 0.424, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.902, - 2.723, - 4.254, - 5.392, - 6.18, - 6.551, - 6.523, - 6.064, - 5.123, - 3.76, - 2.038, - 0.395, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.956, - 2.94, - 4.627, - 5.827, - 6.617, - 6.961, - 6.876, - 6.413, - 5.449, - 4.071, - 2.182, - 0.406, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.961, - 2.968, - 4.686, - 5.906, - 6.697, - 7.061, - 6.938, - 6.413, - 5.443, - 4.051, - 2.177, - 0.384, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.924, - 2.839, - 4.418, - 5.586, - 6.419, - 6.806, - 6.747, - 6.253, - 5.332, - 3.987, - 2.129, - 0.355, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.899, - 2.847, - 4.432, - 5.55, - 6.276, - 6.536, - 6.348, - 5.766, - 4.853, - 3.645, - 1.959, - 0.314, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.855, - 2.757, - 4.309, - 5.385, - 6.088, - 6.345, - 6.178, - 5.589, - 4.735, - 3.547, - 1.88, - 0.295, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.814, - 2.677, - 4.243, - 5.373, - 6.117, - 6.477, - 6.425, - 5.906, - 4.943, - 3.574, - 1.725, - 0.234, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.784, - 2.514, - 4.116, - 5.325, - 6.251, - 6.602, - 6.498, - 6.005, - 4.968, - 3.515, - 1.846, - 0.258, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.892, - 2.948, - 4.768, - 6.087, - 6.991, - 7.364, - 7.225, - 6.648, - 5.562, - 4.058, - 2.058, - 0.254, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.927, - 3.074, - 4.894, - 6.221, - 7.048, - 7.4, - 7.25, - 6.615, - 5.551, - 4.077, - 2.046, - 0.234, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.904, - 3.006, - 4.797, - 6.041, - 6.844, - 7.156, - 6.97, - 6.366, - 5.336, - 3.897, - 1.961, - 0.194, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.864, - 2.885, - 4.546, - 5.681, - 6.379, - 6.643, - 6.483, - 5.904, - 5.005, - 3.693, - 1.834, - 0.158, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.8, - 2.694, - 4.416, - 5.682, - 6.545, - 6.906, - 6.821, - 6.258, - 5.254, - 3.782, - 1.819, - 0.13, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.84, - 2.892, - 4.64, - 5.814, - 6.53, - 6.783, - 6.587, - 5.978, - 5.009, - 3.632, - 1.773, - 0.112, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.804, - 2.761, - 4.415, - 5.625, - 6.402, - 6.751, - 6.637, - 6.036, - 5.01, - 3.565, - 1.666, - 0.096, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.734, - 2.535, - 4.181, - 5.47, - 6.506, - 6.91, - 6.815, - 6.233, - 5.212, - 3.748, - 1.751, - 0.095, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.81, - 2.908, - 4.739, - 6.018, - 6.819, - 7.138, - 6.961, - 6.328, - 5.25, - 3.728, - 1.704, - 0.077, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.792, - 2.847, - 4.628, - 5.854, - 6.597, - 6.876, - 6.666, - 6.037, - 4.992, - 3.549, - 1.619, - 0.06, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.763, - 2.805, - 4.546, - 5.736, - 6.49, - 6.76, - 6.55, - 5.918, - 4.916, - 3.488, - 1.569, - 0.056, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.705, - 2.61, - 4.244, - 5.413, - 6.214, - 6.56, - 6.455, - 5.937, - 4.942, - 3.485, - 1.536, - 0.046, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.733, - 2.709, - 4.372, - 5.528, - 6.252, - 6.538, - 6.377, - 5.825, - 4.851, - 3.415, - 1.492, - 0.033, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.568, - 2.35, - 3.547, - 5.517, - 5.496, - 5.217, - 5.382, - 3.851, - 1.914, - 3.427, - 1.478, - 0.024, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.652, - 2.52, - 4.124, - 5.231, - 5.519, - 5.785, - 5.587, - 4.824, - 3.595, - 2.368, - 0.766, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.645, - 2.53, - 4.202, - 4.792, - 5.615, - 5.34, - 3.404, - 4.069, - 2.459, - 2.359, - 0.453, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.633, - 2.487, - 4.052, - 5.223, - 5.987, - 6.328, - 6.244, - 5.678, - 4.663, - 3.191, - 1.295, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.367, - 2.22, - 4.094, - 5.243, - 6.003, - 6.333, - 6.235, - 5.669, - 4.643, - 3.166, - 1.267, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.601, - 2.483, - 4.199, - 5.399, - 6.209, - 6.525, - 6.42, - 5.799, - 4.721, - 3.171, - 1.24, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.586, - 2.523, - 4.338, - 5.622, - 6.429, - 6.753, - 6.602, - 5.974, - 3.695, - 2.342, - 0.117, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.524, - 0.522, - 2.081, - 5.721, - 3.326, - 6.845, - 6.67, - 1.407, - 1.984, - 3.326, - 0.031, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.621, - 2.715, - 4.589, - 5.853, - 6.615, - 6.922, - 0.968, - 2.175, - 0.129, - 0.199, - 0.762, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.605, - 2.658, - 4.516, - 5.749, - 6.481, - 6.738, - 6.511, - 5.833, - 4.75, - 3.136, - 1.148, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.572, - 2.561, - 4.371, - 5.566, - 6.306, - 6.541, - 6.339, - 5.704, - 4.658, - 3.112, - 1.119, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.554, - 2.546, - 4.305, - 5.453, - 6.055, - 6.21, - 6.013, - 5.438, - 4.459, - 2.992, - 1.073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.523, - 2.452, - 4.169, - 5.362, - 5.191, - 5.37, - 6.18, - 5.513, - 4.422, - 2.86, - 0.989, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.499, - 2.426, - 4.217, - 5.403, - 6.087, - 6.314, - 6.111, - 5.467, - 4.423, - 2.871, - 0.958, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.494, - 2.443, - 4.217, - 5.418, - 6.13, - 6.392, - 6.202, - 5.552, - 4.46, - 2.883, - 0.964, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.486, - 2.422, - 4.167, - 5.298, - 5.932, - 6.087, - 5.806, - 5.182, - 4.249, - 2.786, - 0.917, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.46, - 2.328, - 3.981, - 4.336, - 5.141, - 5.936, - 5.147, - 4.279, - 4.276, - 2.405, - 0.842, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.416, - 2.102, - 3.812, - 5.01, - 5.717, - 5.987, - 5.82, - 5.333, - 4.27, - 2.68, - 0.791, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.413, - 2.26, - 3.982, - 5.159, - 5.927, - 6.241, - 6.075, - 5.449, - 4.367, - 2.743, - 0.812, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.406, - 2.324, - 4.116, - 5.328, - 6.061, - 6.294, - 6.041, - 5.348, - 4.269, - 2.669, - 0.782, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.4, - 2.341, - 4.176, - 5.379, - 6.094, - 6.312, - 6.053, - 5.342, - 4.275, - 2.683, - 0.766, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.371, - 2.295, - 4.045, - 5.151, - 5.91, - 6.229, - 6.088, - 5.43, - 4.333, - 2.683, - 0.714, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.342, - 2.247, - 4.035, - 5.216, - 5.91, - 6.137, - 5.896, - 5.27, - 4.232, - 2.617, - 0.67, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.315, - 2.205, - 3.997, - 5.152, - 5.793, - 5.975, - 5.726, - 5.104, - 4.081, - 2.512, - 0.64, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.293, - 2.198, - 4.024, - 5.222, - 5.96, - 6.221, - 6.003, - 5.337, - 4.225, - 2.554, - 0.656, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.272, - 2.178, - 4.013, - 5.175, - 5.877, - 6.107, - 5.858, - 5.204, - 4.12, - 2.494, - 0.61, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.223, - 1.992, - 3.752, - 4.949, - 5.715, - 5.974, - 5.748, - 4.606, - 2.4, - 1.566, - 0.365, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.206, - 1.972, - 3.75, - 5.007, - 5.772, - 6.04, - 5.8, - 5.122, - 3.909, - 2.236, - 0.489, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.201, - 2.011, - 3.916, - 5.241, - 6.07, - 6.432, - 6.282, - 5.607, - 4.45, - 2.628, - 0.604, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.225, - 2.22, - 4.19, - 5.45, - 6.195, - 6.414, - 6.148, - 5.466, - 4.32, - 2.574, - 0.576, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.211, - 2.194, - 4.137, - 5.396, - 6.126, - 6.338, - 6.066, - 5.323, - 4.174, - 2.457, - 0.53, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.19, - 2.108, - 4.003, - 5.201, - 5.941, - 6.164, - 5.928, - 5.231, - 4.095, - 2.379, - 0.486, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.173, - 2.062, - 3.943, - 5.126, - 5.785, - 5.98, - 5.724, - 3.619, - 3.603, - 1.876, - 0.448, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.163, - 2.009, - 3.86, - 3.804, - 5.556, - 5.826, - 5.663, - 5.054, - 3.994, - 2.292, - 0.221, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.14, - 1.958, - 3.848, - 5.184, - 5.232, - 3.912, - 2.951, - 5.238, - 3.057, - 2.105, - 0.348, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.109, - 1.88, - 3.778, - 5.056, - 5.819, - 6.038, - 5.808, - 5.189, - 4.07, - 2.319, - 0.39, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.131, - 2.047, - 4.022, - 5.35, - 6.143, - 6.409, - 6.142, - 5.406, - 4.174, - 2.356, - 0.368, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.115, - 1.965, - 3.88, - 5.172, - 5.933, - 6.186, - 5.935, - 5.215, - 4.038, - 2.227, - 0.316, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.086, - 1.84, - 3.714, - 4.986, - 5.747, - 6.02, - 5.776, - 5.084, - 3.912, - 2.175, - 0.285, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.074, - 1.794, - 3.654, - 4.889, - 5.594, - 5.798, - 5.556, - 4.892, - 3.813, - 2.142, - 0.269, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.067, - 1.776, - 3.593, - 4.779, - 5.445, - 5.711, - 5.519, - 4.883, - 3.786, - 2.094, - 0.255, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.039, - 1.729, - 3.562, - 4.79, - 5.493, - 5.711, - 5.454, - 4.789, - 3.676, - 1.998, - 0.219, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.043, - 1.675, - 3.479, - 4.571, - 5.234, - 5.577, - 4.199, - 4.827, - 3.722, - 2.011, - 0.218, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.695, - 3.573, - 4.851, - 5.649, - 5.919, - 5.707, - 5.001, - 3.83, - 2.049, - 0.206, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.437, - 3.24, - 4.605, - 5.473, - 5.752, - 5.544, - 3.571, - 3.577, - 1.856, - 0.032, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.432, - 2.188, - 4.6, - 5.437, - 5.736, - 5.546, - 4.895, - 3.748, - 2.0, - 0.196, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.773, - 2.218, - 4.615, - 5.379, - 4.762, - 4.159, - 3.356, - 2.764, - 1.367, - 0.031, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.234, - 3.312, - 3.117, - 5.48, - 5.804, - 5.628, - 4.962, - 3.785, - 1.988, - 0.123, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.447, - 3.322, - 4.675, - 5.464, - 5.763, - 5.56, - 4.868, - 3.684, - 1.925, - 0.155, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.63, - 3.662, - 5.109, - 5.922, - 6.193, - 5.933, - 5.21, - 3.977, - 2.09, - 0.177, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.529, - 3.474, - 4.841, - 5.648, - 5.917, - 5.691, - 4.964, - 3.778, - 1.658, - 0.086, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.726, - 2.311, - 4.774, - 4.355, - 4.86, - 3.059, - 2.263, - 1.036, - 1.621, - 0.073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.344, - 1.811, - 4.506, - 3.901, - 4.119, - 1.709, - 4.825, - 3.64, - 1.865, - 0.111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.403, - 3.247, - 4.57, - 5.382, - 4.8, - 4.008, - 3.482, - 1.688, - 0.643, - 0.011, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.352, - 3.237, - 4.636, - 5.387, - 5.647, - 5.419, - 4.731, - 3.567, - 1.83, - 0.113, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.615, - 2.208, - 3.206, - 5.232, - 5.566, - 5.379, - 4.728, - 3.557, - 1.311, - 0.073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.372, - 3.343, - 4.77, - 5.626, - 5.939, - 5.714, - 4.995, - 3.755, - 1.933, - 0.08, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.607, - 3.251, - 4.655, - 5.444, - 5.771, - 5.588, - 4.926, - 3.737, - 1.937, - 0.119, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.604, - 3.237, - 4.548, - 5.256, - 5.594, - 5.431, - 4.768, - 3.579, - 1.85, - 0.109, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.628, - 3.156, - 4.477, - 5.206, - 5.402, - 5.189, - 4.608, - 3.492, - 1.829, - 0.114, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.508, - 1.939, - 3.161, - 4.31, - 4.215, - 3.933, - 4.381, - 3.381, - 1.751, - 0.09, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.51, - 1.996, - 4.332, - 5.192, - 5.564, - 5.406, - 4.793, - 3.607, - 1.875, - 0.109, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.151, - 3.006, - 4.402, - 5.221, - 5.577, - 5.401, - 4.759, - 3.555, - 0.899, - 0.01, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.148, - 1.258, - 1.942, - 0.118, - 0.665, - 0.25, - 0.314, - 0.86, - 0.543, - 0.096, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.034, - 2.862, - 3.487, - 4.202, - 4.06, - 4.254, - 3.018, - 1.286, - 0.198, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.352, - 0.844, - 0.792, - 1.25, - 3.356, - 3.212, - 3.629, - 2.666, - 1.711, - 0.052, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.0, - 0.048, - 4.376, - 2.94, - 3.559, - 3.84, - 1.912, - 0.055, - 1.822, - 0.047, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.026, - 3.01, - 4.559, - 5.439, - 5.81, - 5.64, - 4.978, - 3.739, - 1.884, - 0.054, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 1.025, - 2.901, - 4.333, - 5.167, - 5.537, - 4.388, - 4.758, - 2.549, - 1.398, - 0.085, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.965, - 2.89, - 4.391, - 5.234, - 5.59, - 5.417, - 3.4, - 3.561, - 1.818, - 0.087, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.967, - 2.94, - 4.461, - 5.37, - 5.738, - 5.552, - 4.889, - 3.662, - 1.854, - 0.092, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.958, - 2.969, - 4.504, - 4.93, - 4.999, - 5.503, - 3.96, - 3.64, - 1.894, - 0.102, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.906, - 2.825, - 4.324, - 5.224, - 5.641, - 5.556, - 2.018, - 1.354, - 1.851, - 0.092, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.851, - 2.81, - 3.419, - 3.097, - 5.57, - 0.267, - 1.832, - 0.727, - 1.028, - 0.073, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.88, - 2.848, - 4.437, - 5.356, - 5.765, - 5.612, - 4.927, - 3.709, - 1.919, - 0.108, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.876, - 2.866, - 4.431, - 5.353, - 5.725, - 5.558, - 4.906, - 3.699, - 1.921, - 0.115, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.816, - 1.515, - 4.248, - 5.07, - 5.35, - 5.256, - 4.677, - 3.559, - 1.859, - 0.108, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.724, - 1.63, - 4.266, - 3.856, - 3.948, - 3.7, - 0.742, - 2.73, - 1.9, - 0.067, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.795, - 2.801, - 4.411, - 5.379, - 5.807, - 5.684, - 5.045, - 3.833, - 2.018, - 0.152, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.813, - 2.789, - 4.338, - 5.22, - 5.581, - 5.432, - 4.823, - 3.68, - 1.956, - 0.078, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.585, - 0.687, - 4.162, - 4.14, - 4.278, - 5.368, - 4.367, - 3.664, - 1.937, - 0.148, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.758, - 2.755, - 4.315, - 5.204, - 5.564, - 5.422, - 4.802, - 3.682, - 1.974, - 0.151, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.722, - 2.67, - 4.202, - 4.955, - 5.259, - 5.2, - 4.645, - 3.548, - 1.886, - 0.126, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.292, - 1.433, - 2.394, - 4.336, - 5.469, - 4.282, - 4.94, - 3.801, - 2.026, - 0.138, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.643, - 2.52, - 4.135, - 5.036, - 4.183, - 5.389, - 4.8, - 3.669, - 1.956, - 0.161, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.658, - 2.58, - 4.146, - 5.051, - 5.455, - 5.343, - 2.893, - 3.059, - 0.852, - 0.035, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.627, - 2.508, - 4.129, - 5.038, - 5.455, - 5.354, - 4.788, - 3.286, - 1.961, - 0.111, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.693, - 2.726, - 4.38, - 5.35, - 5.744, - 4.543, - 3.439, - 2.669, - 1.055, - 0.059, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.679, - 2.696, - 4.333, - 5.256, - 4.721, - 4.934, - 4.959, - 3.847, - 2.149, - 0.238, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.618, - 2.544, - 4.121, - 3.966, - 4.29, - 3.978, - 3.295, - 2.405, - 1.072, - 0.064, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.171, - 0.951, - 1.411, - 2.679, - 3.914, - 4.388, - 3.093, - 1.714, - 2.029, - 0.147, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.08, - 1.72, - 3.056, - 2.693, - 1.442, - 1.342, - 0.403, - 0.919, - 0.727, - 0.039, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.153, - 0.07, - 1.405, - 0.776, - 1.148, - 0.459, - 1.013, - 2.81, - 0.545, - 0.219, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.496, - 0.39, - 1.828, - 0.494, - 1.394, - 1.412, - 1.206, - 0.859, - 0.728, - 0.05, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.507, - 2.355, - 3.984, - 5.036, - 5.489, - 4.157, - 3.552, - 3.837, - 1.602, - 0.335, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "size_kw": 10.0, - "name": "roof_east", - "annual_energy_produced_kwh": 16714.41, - "year_one_energy_produced_kwh": 17487.0, - "annual_energy_exported_kwh": 0.0, - "electric_to_storage_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "electric_curtailed_series_kw": [ - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0, - 0.0 - ], - "lifecycle_om_cost_after_tax": 1564.0, - "lcoe_per_kwh": 0.0594 - } - ], - "Financial": { - "net_present_cost": 0.0, - "lcc": 2.428401357e6, - "year_one_om_costs_before_tax": 1946.6667, - "lifecycle_generation_tech_capital_costs": 45554.4483, - "lifecycle_offgrid_other_annual_costs_after_tax": 0.0, - "initial_capital_costs_after_incentives": 111136.229, - "lifecycle_MG_upgrade_and_fuel_cost": 0.0, - "lifecycle_elecbill_after_tax": 2.2304499547e6, - "lifecycle_offgrid_other_capital_costs": 0.0, - "om_and_replacement_present_cost_after_tax": 48907.9073, - "replacements_future_cost_after_tax": 89626.194, - "developer_annual_free_cashflows": [], - "initial_capital_costs": 207302.2781, - "lifecycle_om_costs_after_tax_bau": 10947.5032, - "offtaker_annual_free_cashflows_bau": [ - 0.0, - -200094.22, - -204698.09, - -209407.89, - -214226.05, - -219155.08, - -224197.53, - -229355.99, - -234633.15, - -240031.73, - -245554.53, - -251204.41, - -256984.28, - -262897.15, - -268946.07, - -275134.17, - -281464.66, - -287940.81, - -294565.97, - -301343.57, - -308277.12, - -315370.21, - -322626.51, - -330049.77, - -337643.84, - -345412.65 - ], - "lifecycle_capital_costs": 141016.3332, - "lifecycle_production_incentive_after_tax": 0.0, - "internal_rate_of_return": 0.19, - "lifecycle_elecbill_after_tax_bau": 2.5219879993e6, - "lifecycle_chp_standby_cost_after_tax": 0.0, - "lifecycle_om_costs_before_tax_bau": 14793.9232, - "lifecycle_om_costs_after_tax": 19027.8031, - "replacements_present_cost_after_tax": 29880.1042, - "lifecycle_outage_cost": 38003.691, - "lifecycle_storage_capital_costs": 95461.8849, - "offtaker_annual_free_cashflows": [ - -207302.28, - -77281.59, - -180429.5, - -184999.06, - -189554.76, - -194129.64, - -198609.75, - -203191.87, - -208126.27, - -213168.04, - -284399.42, - -223093.9, - -228228.84, - -233481.98, - -238856.04, - -244353.8, - -249978.11, - -255731.88, - -261618.1, - -267639.81, - -273800.13, - -280102.26, - -286549.45, - -293145.04, - -299892.46, - -306795.2 - ], - "year_one_om_costs_before_tax_bau": 1120.0, - "lifecycle_emissions_cost_health_bau": 58407.13, - "lifecycle_fuel_costs_after_tax_bau": 0.0, - "developer_om_and_replacement_present_cost_after_tax": 48907.9073, - "offtaker_discounted_annual_free_cashflows": [ - -207302.28, - -71358.81, - -153833.4, - -145641.17, - -137791.01, - -130301.55, - -123092.0, - -116280.56, - -109976.34, - -104007.82, - -128128.03, - -92805.7, - -87665.57, - -82810.12, - -78223.61, - -73891.12, - -69798.59, - -65932.74, - -62281.0, - -58831.52, - -55573.09, - -52495.13, - -49587.65, - -46841.2, - -44246.87, - -41796.23 - ], - "lifecycle_emissions_cost_climate_bau": 350494.22, - "lcc_bau": 2.5988503738e6, - "lifecycle_capital_costs_plus_om_after_tax": 160044.1364, - "lifecycle_emissions_cost_health": 53261.03, - "lifecycle_om_costs_before_tax": 25713.2475, - "annualized_payment_to_third_party": 0.0, - "lifecycle_emissions_cost_climate": 320479.13, - "lifecycle_fuel_costs_after_tax": 0.0, - "lifecycle_chp_standby_cost_after_tax_bau": 0.0, - "lifecycle_production_incentive_after_tax_bau": 0.0, - "offtaker_discounted_annual_free_cashflows_bau": [ - 0.0, - -184759.21, - -174524.69, - -164857.1, - -155725.04, - -147098.85, - -138950.49, - -131253.5, - -123982.88, - -117115.01, - -110627.57, - -104499.5, - -98710.89, - -93242.94, - -88077.87, - -83198.92, - -78590.23, - -74236.84, - -70124.59, - -66240.14, - -62570.87, - -59104.84, - -55830.82, - -52738.16, - -49816.81, - -47057.28 - ], - "npv": 170449.02, - "lifecycle_MG_upgrade_and_fuel_cost_bau": 0.0, - "simple_payback_years": 4.45, - "year_one_om_costs_after_tax": 1440.5333, - "lifecycle_outage_cost_bau": 65914.3623 - } -} diff --git a/test/debugging_tests.jl b/test/debugging_tests.jl index 7f61299be..1cf1ddb8c 100644 --- a/test/debugging_tests.jl +++ b/test/debugging_tests.jl @@ -11,57 +11,10 @@ using DelimitedFiles inputs = JSON.parsefile("./scenarios/ac_dc_pvs.json") inputs["ElectricTariff"]["tou_energy_rates_per_kwh"] = repeat(cat(0.2*ones(15), 0.4*ones(5), 0.2*ones(4), dims=1), outer=365) - # results = run_reopt([m1,m2], inputs) - results = run_reopt(m2, inputs) + results = run_reopt([m1,m2], inputs) open("ac_dc_pvs_results.json","w") do f JSON.print(f, results, 4) end - # for (key, model) in Dict("OPT" => m2)#"BAU" => m1, - # println(key) - # # MOI.compute_conflict!(backend(model)) - # compute_conflict!(model) - # # if MOI.get(backend(model), MOI.ConflictStatus()) == MOI.CONFLICT_FOUND - # if get_attribute(model, MOI.ConflictStatus()) == MOI.CONFLICT_FOUND - # iis_model, _ = copy_conflict(model) - # print(iis_model) - # # println(keys(model.obj_dict)) - # # open("ac_dc_pvs_conflicts.json","w") do f - # # JSON.print(f, model.obj_dict, 4) - # # end - # # for (name, obj) in model.obj_dict - # # # println(typeof(obj)) - # # # if typeof(obj) <: ConstraintRef - # # # println(MOI.get(model, MOI.ConstraintConflictStatus(), obj)) - # # # if MOI.get(model, MOI.ConstraintConflictStatus(), obj) == MOI.IN_CONFLICT - # # # println(obj) - # # # end - # # println(name) - # # if typeof(obj) <: JuMP.Containers.DenseAxisArray || typeof(obj) <: JuMP.Containers.SparseAxisArray - # # for elem in obj - # # # if typeof(elem) <: ConstraintRef - # # try - # # println(MOI.get(model, MOI.ConstraintConflictStatus(), elem)) - # # # if MOI.get(model, MOI.ConstraintConflictStatus(), elem) == MOI.IN_CONFLICT - # # # println(elem) - # # # end - # # catch - # # # println(typeof(elem)) - # # end - # # end - # # else - # # try - # # # println(typeof(obj)) - # # println(MOI.get(model, MOI.ConstraintConflictStatus(), obj)) - # # # if MOI.get(model, MOI.ConstraintConflictStatus(), obj) == MOI.IN_CONFLICT - # # # println(obj) - # # # end - # # catch - # # # println(typeof(obj)) - # # end - # # end - # # end - # end - # end @test results["ElectricStorage"]["size_kw"] ≈ 31.88 atol=0.1 @test results["ElectricStorage"]["size_kwh"] ≈ 210.17 atol=0.1 @@ -81,7 +34,7 @@ using DelimitedFiles @test ground_pv["annual_energy_produced_kwh"] ≈ 145904.83 atol=0.1 @test roof_west["annual_energy_produced_kwh"] ≈ 45938.58 atol=0.1 @test roof_east["annual_energy_produced_kwh"] ≈ 16714.41 atol=0.1 - @test sum(ground_pv["electric_to_storage_series_kw"]) ≈ 63124.386 atol=0.1 + @test sum(ground_pv["electric_to_storage_series_kw"]) ≈ 63160.44 atol=0.1 @test sum(roof_west["electric_to_storage_series_kw"]) ≈ 0 atol=0.1 @test sum(roof_east["electric_to_storage_series_kw"]) ≈ 0 atol=0.1 expected_outage_results = Dict( diff --git a/test/scenarios/ac_dc_pvs.json b/test/scenarios/ac_dc_pvs.json index 6d0a7f6d9..3e0a9c8c6 100644 --- a/test/scenarios/ac_dc_pvs.json +++ b/test/scenarios/ac_dc_pvs.json @@ -1,7 +1,9 @@ { "Site": { "latitude": 34.5794343, - "longitude": -118.1164613 + "longitude": -118.1164613, + "land_acres": 0.25, + "roof_squarefeet": 1000.0 }, "Financial": { "om_cost_escalation_rate_fraction": 0.025, @@ -13,9 +15,7 @@ "ElectricLoad": { "doe_reference_name": "RetailStore", "annual_kwh": 1000000.0, - "year": 2017, - "loads_kw_is_net": false, - "critical_loads_kw_is_net": false + "year": 2017 }, "ElectricTariff": { "blended_annual_energy_rate": 0.3, @@ -34,7 +34,7 @@ { "name": "ground", "dc_coupled_with_storage": true, - "min_kw": 40.0, + "existing_kw": 40.0, "installed_cost_per_kw": 1600.0, "om_cost_per_kw": 16.0, "macrs_option_years": 5, @@ -54,7 +54,7 @@ }, { "name": "roof_west", - "min_kw": 30.0, + "existing_kw": 30.0, "installed_cost_per_kw": 1600.0, "om_cost_per_kw": 16.0, "macrs_option_years": 5, @@ -74,7 +74,7 @@ }, { "name": "roof_east", - "min_kw": 0.0, + "existing_kw": 0.0, "installed_cost_per_kw": 1600.0, "om_cost_per_kw": 16.0, "macrs_option_years": 5,