lang/gcc48,49,5,6: Refine the condition to enable multilib #65

bartoszkosiorek · 2020-06-09T10:44:45Z

It fixes the build issue on Ubuntu 20.04

Pull Request created after comments from:
#62

krytarowski · 2020-06-09T11:26:08Z

Please try to push these paths to: mk/platform/Linux.mk

krytarowski · 2020-06-09T11:26:50Z

Ah, done I was apparently looking at an older revision, checking.

mk/platform/Linux.mk

krytarowski · 2020-06-09T11:46:31Z

@jperkin could you please handle this as you can have access to Linux and other platforms?

Update ruby-jekyll-archives to 2.2.1. 2.2.1 (2019-03-23) Minor Enhancements * Make Archive subclass of Page (NetBSD#67) * Don't limit slugs/title to strings (NetBSD#41) * Enable incremental operation (NetBSD#58) * Remove deprecated defs (NetBSD#89) Development Fixes * Target Ruby 2.3 * Allow testing and using with Jekyll 4.x (NetBSD#133) * Update Travis config and Gemfile for Ruby < 2.2.2 support (NetBSD#68) * Consolidate History file to work with jekyllbot (NetBSD#80) * Remove Travis test for Ruby 1.9 (NetBSD#87) * Inherit Jekyll's rubocop config for consistency (NetBSD#65) * Bump travis ruby versions (NetBSD#91) * Fix Travis build error (NetBSD#93) * Define path with dir (NetBSD#105) * Appease Rubocop (NetBSD#104) * update Rubocop and Travis config (NetBSD#110) * Update .travis.yml (NetBSD#111) * Modernize tests & linting (NetBSD#114) * Test against Ruby 2.5 (NetBSD#118) * Lint with rubocop-jekyll (NetBSD#128) Documentation * Update Installation Guide (NetBSD#116) * docs/configuration: GitHub table display was messed up (NetBSD#96) * Small updates for consistency across document (NetBSD#130)

Update ruby-jekyll-watch to 2.2.1. pkgsrc change: add "USE_LANGUAGES= # none". 2.2.1 / 2019-03-22 Bug Fixes * Fix encoding discrepancy in excluded Windows paths (NetBSD#76) * Ignore directories rather than all similar paths (NetBSD#65) Development Fixes * Test against Ruby 2.6 * Relax version constraint on bundler to allow using 1.x or 2.x * dependencies: rubocop-jekyll 0.5 * style: target Ruby 2.4 2.1.2 / 2018-10-17 Development Fixes * Initialize AppVeyor CI to test plugin on Windows (NetBSD#77) Bug Fixes * Fix watcher failure due to incorrect file name encoding (NetBSD#78) 2.1.1 / 2018-10-10 Bug Fixes * Replace non-existent local variable (NetBSD#73) 2.1.0 / 2018-10-09 Bug Fixes * Normalize watched-path encoding (NetBSD#69) Development Fixes * Test against Ruby 2.5 (NetBSD#62) * Drop support for Ruby 2.2 (EOL) * Style: lint with rubocop-jekyll

v47.3.2 ------- * #2071: Replaced references to the deprecated imp package with references to importlib v47.3.1 ------- * #1973: Removed ``pkg_resources.py31compat.makedirs`` in favor of the stdlib. Use ``os.makedirs()`` instead. * #2198: Restore ``__requires__`` directive in easy-install wrapper scripts. v47.3.0 ------- * #2197: Console script wrapper for editable installs now has a unified template and honors importlib_metadata if present for faster script execution on older Pythons. * #2195: Fix broken entry points generated by easy-install (pip editable installs). v47.2.0 ------- * #2194: Editable-installed entry points now load significantly faster on Python versions 3.8+. v47.1.1 ------- * #2156: Update mailing list pointer in developer docs Incorporate changes from v44.1.1: * #2158: Avoid loading working set during ``Distribution.finalize_options`` prior to invoking ``_install_setup_requires``, broken since v42.0.0. v44.1.1 ------- * #2158: Avoid loading working set during ``Distribution.finalize_options`` prior to invoking ``_install_setup_requires``, broken since v42.0.0. v47.1.0 ------- * #2070: In wheel-to-egg conversion, use simple pkg_resources-style namespace declaration for packages that declare namespace_packages. v47.0.0 ------- * #2094: Setuptools now actively crashes under Python 2. Python 3.5 or later is required. Users of Python 2 should use ``setuptools<45``. * #1700: Document all supported keywords by migrating the ones from distutils. v46.4.0 ------- * #1753: ``attr:`` now extracts variables through rudimentary examination of the AST, thereby supporting modules with third-party imports. If examining the AST fails to find the variable, ``attr:`` falls back to the old behavior of importing the module. Works on Python 3 only. v46.3.1 ------- No significant changes. v46.3.0 ------- * #2089: Package index functionality no longer attempts to remove an md5 fragment from the index URL. This functionality, added for distribute #163 is no longer relevant. * #2041: Preserve file modes during pkg files copying, but clear read only flag for target afterwards. * #2105: Filter ``2to3`` deprecation warnings from ``TestDevelop.test_2to3_user_mode``. v46.2.0 ------- * #2040: Deprecated the ``bdist_wininst`` command. Binary packages should be built as wheels instead. * #2062: Change 'Mac OS X' to 'macOS' in code. * #2075: Stop recognizing files ending with ``.dist-info`` as distribution metadata. * #2086: Deprecate 'use_2to3' functionality. Packagers are encouraged to use single-source solutions or build tool chains to manage conversions outside of setuptools. * #1698: Added documentation for ``build_meta`` (a bare minimum, not completed). * #2082: Filter ``lib2to3`` ``PendingDeprecationWarning`` and ``DeprecationWarning`` in tests, because ``lib2to3`` is `deprecated in Python 3.9 <https://bugs.python.org/issue40360>`_. v46.1.3 ------- No significant changes. v46.1.2 ------- * #1458: Added template for reporting Python 2 incompatibilities. v46.1.1 ------- No significant changes. v46.1.0 ------- * #308: Allow version number normalization to be bypassed by wrapping in a 'setuptools.sic()' call. * #1424: Prevent keeping files mode for package_data build. It may break a build if user's package data has read only flag. * #1431: In ``easy_install.check_site_dir``, ensure the installation directory exists. * #1563: In ``pkg_resources`` prefer ``find_spec`` (PEP 451) to ``find_module``. Incorporate changes from v44.1.0: * #1704: Set sys.argv[0] in setup script run by build_meta.__legacy__ * #1959: Fix for Python 4: replace unsafe six.PY3 with six.PY2 * #1994: Fixed a bug in the "setuptools.finalize_distribution_options" hook that lead to ignoring the order attribute of entry points managed by this hook. v44.1.0 ------- * #1704: Set sys.argv[0] in setup script run by build_meta.__legacy__ * #1959: Fix for Python 4: replace unsafe six.PY3 with six.PY2 * #1994: Fixed a bug in the "setuptools.finalize_distribution_options" hook that lead to ignoring the order attribute of entry points managed by this hook. v46.0.0 ------- * #65: Once again as in 3.0, removed the Features feature. * #1890: Fix vendored dependencies so importing ``setuptools.extern.some_module`` gives the same object as ``setuptools._vendor.some_module``. This makes Metadata picklable again. * #1899: Test suite now fails on warnings. * #2011: Fix broken link to distutils docs on package_data * #1991: Include pkg_resources test data in sdist, so tests can be executed from it. v45.3.0 ------- * #1557: Deprecated eggsecutable scripts and updated docs. * #1904: Update msvc.py to use CPython 3.8.0 mechanism to find msvc 14+ v45.2.0 ------- * #1905: Fixed defect in _imp, introduced in 41.6.0 when the 'tests' directory is not present. * #1941: Improve editable installs with PEP 518 build isolation: * The ``--user`` option is now always available. A warning is issued if the user site directory is not available. * The error shown when the install directory is not in ``PYTHONPATH`` has been turned into a warning. * #1981: Setuptools now declares its ``tests`` and ``docs`` dependencies in metadata (extras). * #1985: Add support for installing scripts in environments where bdist_wininst is missing (i.e. Python 3.9). * #1968: Add flake8-2020 to check for misuse of sys.version or sys.version_info. v45.1.0 ------- * #1458: Add minimum sunset date and preamble to Python 2 warning. * #1704: Set sys.argv[0] in setup script run by build_meta.__legacy__ * #1974: Add Python 3 Only Trove Classifier and remove universal wheel declaration for more complete transition from Python 2. v45.0.0 ------- * #1458: Drop support for Python 2. Setuptools now requires Python 3.5 or later. Install setuptools using pip >=9 or pin to Setuptools <45 to maintain 2.7 support. * #1959: Fix for Python 4: replace unsafe six.PY3 with six.PY2

Version 3.14.2 (released August 13, 2020) - Fix ENV typo in the test suite [Gregor Herrmann] - Renamed and enhanced test helper script: dbdpg_test_postgres_versions.pl [Greg Sabino Mullane] Version 3.14.1 (released August 12, 2020) - Force the version string so undefined errors in the "driver" sub go away. [Greg Sabino Mullane] (RT ticket #83057) Version 3.14.0 (released July 19, 2020) - The $dbh->primary_key_info and $dbh->foreign_key_info methods will now always return a statement handle, even with no matches. Previously, they returned undef directly. Callers can check if the returned handle contains any rows. [Greg Sabino Mullane] - The $dbh->tables method will always return a list, even if it is empty. [Greg Sabino Mullane] - Add pg_lo_tell64, pg_lo_seek64, and pg_lo_truncate64, for anyone dealing with really, really, really large 'large objects'. Requires Postgres 9.3 or better. [Greg Sabino Mullane] (RT ticket #123561) - Allow test to run again when using a non-superuser to connect [Greg Sabino Mullane] (RT ticket #132865) - Adjust tests to force loading proper version of DBD::Pg every time. [Greg Sabino Mullane] - Removed the long-deprecated _pg_use_catalog method. [Greg Sabino Mullane] - Many improvements and changes to the test suite. [Greg Sabino Mullane] Version 3.13.0 (released June 17, 2020) - Redo the "last_result" internals in dbdimp.c, which fixes a memory leak. [Greg Sabino Mullane] (RT ticket #132812) - Fix regression in Perl length() for returned query results [Jon Jensen] (Github issue #72) - Make $sth->finish() do a little less. Notably, even after calling finish(), pg_error_field will still work on the last action performed. [Greg Sabino Mullane] - Tweak tests so Windows boxes pass [Greg Sabino Mullane] Version 3.12.3 (released June 5, 2020) - Prevent DBI from flipping AutoCommit to 'on' after a failed commit [Greg Sabino Mullane] (Github issue #71) Version 3.12.2 (released June 4, 2020) - Revert overly aggressive testing shortcut as it can cause installs to fail [Greg Sabino Mullane, with apologies] Version 3.12.1 (released June 3, 2020) - Remove test that assumed '(12,34)' is an invalid entry for type "circle", as the Postgres source code changed this behavior on April 7, 2020 [Greg Sabino Mullane] (RT ticket #132740) Version 3.12.0 (released May 7, 2020) - Add CONTRIBUTING.md file - Return the table info row last in statistics_info. This fixes statistics_info on pre-8.3 servers. [Dagfinn Ilmari Mannsåker] - Fix ASC_OR_DESC field in statistics_info [Dagfinn Ilmari Mannsåker] - Indicate NULL ordering in statistics_info [Dagfinn Ilmari Mannsåker] Version 3.11.1 (released April 28, 2020) - Adjust Makefile to fix failing 'fulltest' target on BSD systems [Slaven Rezić] (RT ticket #132412) Version 3.11.0 (released April 23, 2020) - Indicate non-key index columns (INCLUDE) in statistics_info [Dagfinn Ilmari Mannsåker] - Return an empty result set instead of undef from statistics_info when the requested table doesn't exist and $unique_only is false. [Dagfinn Ilmari Mannsåker] - Fix segfault during st destroy [Gregory Oschwald] (Github pull request #66) (Github issue #57) - Improve testing for table_info() [Greg Sabino Mullane] (Github issue #67) - Improve UTF-8 wording in docs [Felipe Gasper] (Github pull request #65) Version 3.10.5 (released March 23, 2020) - Minor adjustment for Windows build (RT ticket #131752) - Allow test suite to work on an EnterpriseDB server [H.Merijn Brand] (RT ticket #132203) - Add small warning regarding ShowErrorStatement (RT ticket #120268) Version 3.10.4 (released February 3, 2020) - Allow localtime from Time::Piece to be used directly as a bind value again. This applies to all "magical" arrays. [Greg Sabino Mullane] (Github issue #63) - Force tests to NOT run in parallel. [Greg Sabino Mullane] (RT ticket #130834) Version 3.10.3 (released January 20, 2020) - Set things cleared via PQclear to NULL as soon as possible, to remove race conditions [Greg Sabino Mullane] (RT ticket #131522) Version 3.10.2 (released January 17, 2020) - Adjust tests to pass on 32-bit machines [Greg Sabino Mullane] (RT ticket #131482) Version 3.10.1 (released January 13, 2020) - Prevent double-free memory errors [Greg Sabino Mullane] (RT ticket #130681) - Fix crash when pg_error_field is called [Greg Sabino Mullane] (RT ticket #130721) - Update the list of Postgres reserved words in quote.c Version 3.10.0 (released September 3, 2019) - Prevent memory leak related to pg_error_field [Greg Sabino Mullane] (RT ticket #130430) - Fix for bug by making sure pg_error_field works properly when switching between do-with-params and do-without-params. [Greg Sabino Mullane] (Github issue #57) - If a commit or rollback fails, do not set BegunWork [Greg Sabino Mullane] (Github issue #40) - Treat partitioned tables same as regular tables for column_info, table_info, and foreign_key_info (i.e. support pg_class.relkind = 'p') [Octavian R. Corlade] (Github pull request #55) - Allow last_insert_id() to work against inherited tables [Greg Sabino Mullane] (RT ticket #52441) - Add DBI SQL_BLOB, SQL_BINARY and SQL_LONGVARBINARY types as alias for PG_BYTEA [Pali] (Github pull request #58)

Update ruby-diff-lcs to 1.4.4. ## 1.4.4 / 2020-07-01 - Fixed an issue reported by Jun Aruga in the Diff::LCS::Ldiff binary text detection. [#44][] - Fixed a theoretical issue reported by Jun Aruga in Diff::LCS::Hunk to raise a more useful exception. [#43][] - Added documentation that should address custom object issues as reported in [#35][]. - Fixed more diff errors, in part reported in [#65][]. - The use of `Numeric#abs` is incorrect in `Diff::LCS::Block#diff_size`. The diff size _must_ be accurate for correct change placement. - When selecting @max_diff_size in Diff::LCS::Hunk, choose it based on `block.diff_size.abs`. - Made a number of changes that will, unfortunately, increase allocations at the cost of being safe with frozen strings. - Add some knowledge that when `Diff::LCS::Hunk#diff` is called, that we are processing the _last_ hunk, so some changes will be made to how the output is generated. - `old`, `ed`, and `reverse_ed` formats have no differences. - `unified` format will report `\ No newline at end of file` given the correct conditions, at most once. Unified range reporting also differs for the last hunk such that the `length` of the range is reduced by one. - `context` format will report `\No newline at end of file` given the correct conditions, up to once per "file". Context range reporting also differs for the last hunk such that the `end` part of the range is reduced by one to a minimum of one. - Added a bunch more tests for the cases above, and fixed `hunk_spec.rb` so that the phrase being compared isn't nonsense French. - Updated formatting. - Added a Rake task to assist with manual testing on Ruby 1.8. ## 1.4.3 / 2020-06-29 - Fixed several issues with the 1.4 on Rubies older than 2.0. Some of this was providing useful shim functions to Hoe 3.x (which dropped these older Rubies a while ago). Specifically: - Removed Array#lazy from a method in Diff::LCS::Hunk. - Changed some unit tests to use old-style Symbol-keyed hashes. - Changed some unit test helper functions to no longer use keyword parameters, but only a trailing options hash. - Made the use of `psych` dependent on `RUBY_VERSION >= 1.9`. Resolves [#63][]. ## 1.4.2 / 2020-06-23 - Camille Drapier fixed a small issue with RuboCop configuration. [#59][] - Applied another fix (and unit test) to fix an issue for the Chef team. [#60][], [#61][] ## 1.4.1 / 2020-06-23 - Fix an issue where diff sizes could be negative, and they should be. [#57][], [#58][] ## 1.4 / 2020-06-23 - Ruby versions lower than 2.4 are soft-deprecated and will not be run as part of the CI process any longer. - Akinora MUSHA (knu) added the ability for Diff::LCS::Change objects to be implicitly treated arrays. Originally provided as pull request [#47][], but it introduced a number of test failures as documented in [#48][], and remediation of Diff::LCS itself was introduced in [#49][]. - Resolved [#5][] with some tests comparing output from `system` calls to `bin/ldiff` with some pre-generated output. Resolved [#6][] with these tests. - Resolved a previously undetected `bin/ldiff` issue with `--context` output not matching `diff --context` output. - Resolved an issue with later versions of Ruby not working with an `OptParse` specification of `Numeric`; this has been changed to `Integer`. - Brandon Fish added truffleruby in [#52][]. - Fixed two missing classes as reported in [#53]

Changelog, taken from NEWS file and https://github.com/immerrr/lua-mode/releases: v20201010 * minimum Emacs version requirement is now 24.3 * fix multiline literals propertization not to break subsequent syntax * lua--fill-paragraph: fix to not move point away * lua-default-application: ensure it is possible to use (HOST . PORT) to connect to remote lua process * lua-kill-process: clean up process-related variables * lua-indent-nested-block-content-align, lua-indent-close-paren-align: new variables to control placement of nested blocks and their respective closers. With lua-indent-nested-block-content-align and lua-indent-close-paren-align set to nil, it is now possible to auto-indent code like this: foo = bar(baz, { qux, quux, }, { xyzzy }) * lua-rx: fix compatibility with new-style rx macros introduced in Emacs 27 * lua-start-process: ensure comint-prompt-regexp is set locally in inferior process buffer * make "git archive" revision format reproduceable by not including the date of the archiving operation * imenu: add "require" lines to the index * lua-backward-up-list: new navigation command that puts point before the current parenthetic construction/block * lua-indent-line: improve auto-indentation of implicitly continued statements, add some performance optimizations * font-lock: stop highlighting syntax errors in assignment statements * font-lock: add highlighting of function parameters and "for" loop variables * font-lock: fix couple of corner cases of highlighting of keywords inside strings and comments * Release v20151025 ** allow setting lua-indent-level as file local variable (issue #108) ** add luadoc keyword fontification (issue #71) ** fix comments being spilled into the code (issue #25) ** add `run-lua' alias for `lua-start-process' (issue #97) ** skip shebang line when sending to inferior buffer (issue #61) ** add builtin functions and modules for Lua 5.3 (issue #90) ** fix lua-beginning-of-proc matching (issue #85) ** add `lua-documentation-function' to customize the way the documentation is shown, rename `lua-search-url-prefix' to `lua-documentation-url', auto-detect lua documentation installed in /usr/share/doc/lua (issue #82) ** fix some errors with `lua-kill-process' (issue #69) ** improve `next-error' integration in Lua subprocess buffer: "stdin:N:" entries are no longer highlighted and no longer prompt for "stdin" files * release v20140514 ** add support for Lua 5.2 goto statements ** when indenting, don't anchor to block-open tokens somefunc({ ^ don't indent next line relative to this brace ** fix several `indent-new-comment-line'-related bugs ** add support for local functions in imenu (issue #65) ** fix font lock of functions with underscores (issue #63) ** don't send shebang when sending lua buffer to subprocess (issue #61) ** fix interaction with electric-pair-mode (issue #54) ** rewrite lua-send-region to use "loadstring" rather than "dofile" - sending code to processes on remote hosts is now supported - stack traces for errors occurred in sent code point to proper lines in files - script path is preserved when sending code (issue #55) - no more hang ups when waiting for input (issue #48) or after sending code with no output (issue #60) ** increase consistency with Emacs ecosystem to improve user experience - fix character syntax hacks: '.' is now punctuation and '_' is now symbol - remove number highlighting - font-lock "nil", "true" and "false" as constants rather than keywords ** make builtin font-locking more stable, enable it after ".." operator ** add missing modulo operator (%) to line-continuation tokens ** fix interaction with electric-pair-mode (issue #54) ** when unindenting block-close tokens consider all of them, not just the first one x = foobar('arg1', function () print('foobar') end) ^ this line starts with two block-close tokens and is unindented accordingly

Changes: Vim-style expandtab option (#75, #76, #80) Provides Turkish translation (#68) Backspace now deletes \ rather than being escaped (#25) T during motion commands is now VI-compatible (#35) Encoding related fixes, such as UTF-8 detection (#61, #42, #65) Fixed a number of memory management issues (#56)

It fixes the build issue on Ubuntu 20.04

bartoszkosiorek · 2020-11-25T10:41:35Z

@krytarowski What else needs to be done to accept this Pull Request?

krytarowski · 2020-11-25T11:57:07Z

@bartoszkosiorek-tomtom I will leave you a mail, please contact me on kamil@netbsd.org

NEWS - OpenPrinting CUPS Filters v1.28.7 - 2021-01-07 ----------------------------------------------------- CHANGES IN V1.28.7 - driverless: Removed the support quality check from Pull request #235 as it takes significant time for each printer being listed, making cups-driverd (`lpinfo -m`) timing out when there are many printers (OpenPrinting CUPS issue #65). - libcupsfilters: In the PPD generator give priority to Apple Raster against PDF (Issue #331). - libcupsfilters: Added NULL check when removing ".Borderless" suffixes from page size names (Issue #314, Pull request #328). - libcupsfilters: In the cupsRasterParseIPPOptions() map the color spaces the same way as in the PPD generator (Issue #326, Pull request #327). - libcupsfilters: Fixed addition of grayscale mode in generated PPD files, to avoid duplicate entries (OpenPrinting CUPS issue #59).

1.7.9, released 2020-12-19 #72, add pureIf #73, make takeEnd, dropEnd, splitAtEnd: return immediately if i <= 0 #71, add compareLength and comparingLength 1.7.8, released 2020-09-12 #68, make sure Data.Foldable.Extra is exposed 1.7.7, released 2020-08-25 #67, defer to System.IO readFile', hGetContents' in GHC 9.0 1.7.6, released 2020-08-21 #66, add lots of functions to Data.Foldable.Extra (anyM etc) 1.7.5, released 2020-08-12 #65, add Data.Foldable.Extra #65, add sum', product', sumOn' and productOn' 1.7.4, released 2020-07-15 #59, add whileJustM and untilJustM #61, optimise nubOrd (10% or so) Add first3, second3, third3 1.7.3, released 2020-05-30 #58, add disjointOrd and disjointOrdBy 1.7.2, released 2020-05-25 #56, add zipWithLongest #57, make duration in MonadIO Simplify and optimise Barrier Mark modules that are empty as DEPRECATED Remove support for GHC 7.10 1.7.1, released 2020-03-10 Add NOINLINE to errorIO to work around a GHC 8.4 bug 1.7, released 2020-03-05 * #40, delete deprecated function for * zipFrom now truncates lists, rather than error, just like zip 1.6.21, released 2020-03-02 #54, deprecate nubOn since its O(n^2). Use nubOrdOn #53, add some nub functions to NonEmpty 1.6.20, released 2020-02-16 Add firstM, secondM 1.6.19, released 2020-02-11 #50, add headDef, lastDef, and dropEnd1

[1.22] * Deprecate isNull from Builder: null can serve just as well (#67). Use null instead of isNull in Arbitrary (Christian Despres, #84). * Use untagged JSON encoding for single-constructor types (#75, #76, Christian Despres). All of the single constructor types related to Table are now represented in JSON either as arrays (for multi-argument constructors) or as the representation of the inner type (for single argument constructors). This behaviour for newtype-defined and multi-argument non-record types is now consistent across the entire JSON interface, with the exception of Pandoc itself (which is represented as a JSON object with additional metadata). Multi-argument records (of which Citation is the only example) are still represented as objects with the record accessors as keys. * The Meta and Citation types now use derived JSON serialization (newtype and generic, respectively). The format remains the same as before (Christian Despres). * New serialization tests now test that Meta and the Table types are encoded properly in JSON (Christian Despres). * Use TH To/FromJSON instances (Christian Despres). * Remove unused Legacy modules (#80, Despres). They are not exported, and are not used internally. * Change the table builder to permit looser intermediate table heads (#77, Christian Despres). The table builder (and the normalizeTableBody function) now permit cells in the intermediate head of a TableBody to extend past the RowHeadColumns. This allows for intermediate tables to have subheadings that extend across the entire table. Formerly the table builder would treat the intermediate head like the intermediate body, and clip or drop cells that extended past the row head. * Update QuickCheck lower bound. * Fix redundant pattern match. [1.21] * Add Underline constructor (#68, Vaibhav Sagar). * Improve table types to allow col, rowspans and more (#65, Christian Despres). The additions include modification of the Block type, some newtypes related to tables, and changes to the table builders. The table builder is now aware of the new Table constructor, and normalizes the input table appropriately, so that when laid onto a grid the resulting table has no empty spaces, overlapping cells, or cells that extend beyond their section boundary. Three properties of normalization are checked: - Normalization is idempotent. - Each row of a normalized table is an initial segment of the corresponding row in the unnormalized table, modulo changed cell dimensions, dropped cells, and padding with empty cells. This is only checked for the first row of the TableBody, however, due to row head difficulties. - The sum of the cell lengths in the first row of every normalized table section is always equal to the total table width. `simpleTable` has been changed so that a null header list becomes a TableHead with a null body, not a TableHead with a single empty row. * Bump QuickCheck upper bound. * Change lower bound for QuickCheck to 2.10 (needed for `liftShrink2`). * Small code quality improvements (Joseph C. Sible, #69). * Allow aeson 1.5 (#72, Felix Yan). * Fixed documentation typo (Merlin Göttlinger). * Add COMPLETE pragmas to the pattern definitions (Christian Despres).

0.071 2021-03-30 - fix #67 (better handling of PEM decoding failures) 0.070 2021-02-12 - fix #66 remove -flto=auto (Makefile.PL) - fix #65 typo in docs (lib/Crypt/Cipher.pm) - bundled libtomcrypt update branch:develop (commit:910d6252 2021-01-19)

glibmm is a C++ interface for the devel/glib2 library. This package follows the 2.68 API. Changes compared to devel/glibmm: 2.68.0 (stable): This is the first stable release in the glibmm-2.68 ABI series. It is parallel-installable with the glibmm-2.4 ABI. The tarball for 2.68.0 has been created with 'meson dist'. If you build with Autotools from the tarball, please read the relevant part of the README file. Glib: * PropertyProxyConnectionNode::connect_changed(): Fix using without property name (Daniel Boles) Issue #74 (wswfc), merge request !35 * Remove BalancedTree (Kjell Ahlstedt) Gio: * ListStore: Accept interfaces (Andreas Persson) Merge request !38 * MenuModel: Make MenuAttribute and MenuLink enum class (Kjell Ahlstedt) * Add TlsClientConnectionImpl and TlsServerConnectionImpl (Kjell Ahlstedt) * SocketClient::signal_event(): Fix wrapping of 'connection' parameter (Kjell Ahlstedt) Issue #73 (smilingthax) gmmproc: * Add optional decl_prefix parameter to _WRAP_GERROR and _WRAP_ENUM Used for adding GLIBMM_API or similar for MS Visual C++ (Chun-wei Fan) Merge request !32 * Allow decorating comparison operators (for Visual Studio builds) (Chun-wei Fan) Merge request !33 * _CLASS_BOXEDTYPE, _CLASS_OPAQUE_COPYABLE: Fix move assignment (Kjell Ahlstedt) Issue #76 (misos1) * Decorate private generated classes with __declspec when building with Visual Studio (Chun-wei Fan) Merge request !39, !41 * generate_wrap_init.pl.in: Use g_type_ensure(SomeClass::get_type()) to ensure that get_type() is called (Kjell Ahlstedt) Build: * Use __declspec(dllexport) consistently when building glibmm with Visual Studio (Chun-wei Fan) Merge request !32 * Meson build: Set default value of the 'warnings' option to 'min' (Kjell Ahlstedt) * Improve NMake support (Chun-wei Fan) * Improve Visual Studio support (Chun-wei Fan) Merge request !37 * docs/reference/: Update for Doxygen >= 1.8.16 (Kjell Ahlstedt) * Meson build: Fix versioning on macOS (Kjell Ahlstedt) Pull request libsigcplusplus#65 (Tom Schoonjans) * Meson build: Fix detection of macOS (Tom Schoonjans) Merge request !43 * Change the ABI to glibmm-2.68 (Kjell Ahlstedt) Documentation: * Meson build: Add missing Glib::Value and Variant documentation (Kjell Ahlstedt) 2.65.3: (unstable): Distro packagers should probably not package this yet. Tests: * glibmm_buildfilename: Add some tests (Kjell Ahlstedt) Issue #71 (Kalev Lember) Build: * Meson build: Install generate_extra_defs.h (Kjell Ahlstedt) Issue #70 (Jan Alexander Steffens) 2.65.2: (unstable): Distro packagers should probably not package this yet. Glib: * Add missing #includes (Kjell Ahlstedt) Issue #69 (Kalev Lember) 2.65.1: (unstable): Distro packagers should probably not package this yet. Glib: * Add get_user_runtime_dir() (scx) Issue #57, merge request !14 * Add get_host_name() (scx) Issue #58, merge request !15 * MainContext: Add push/pop/get_thread_default() (Kjell Ahlstedt) Issue #56 (Yackie-Yang) * Add StdStringView and UStringView Use them in build_filename() and other functions (Thomas Holder, Kjell Ahlstedt) Issue #34 (Thomas Holder) Issue #64, #65 * Regex::match(): Avoid using string after deletion (Thomas Holder) Issue #66, merge request !25 * Add Glib::canonicalize_filename() (Kjell Ahlstedt) Issue #59 (Patrick Storz) * Binding: get_source() and get_target() return ObjectBase* (Kjell Ahlstedt) Issue #63 (Daniel Boles) * ustring: Fix insert(iterator, In, In) (Thomas Holder) Merge request !19 * Value: Adding static_assert() for template parameter (Pavlo Solntsev) Merge request !23 * Error: Derive from std::exception, remove Glib::Exception (Kjell Ahlstedt) Issue #23 (Daniel Boles) * Binding: Keep a binding alive even without a RefPtr (Kjell Ahlstedt) Issue #62 (Daniel Boles) Gio: * DBus::Connection: Make the wrap() function thread-safe (Kjell Ahlstedt) Issue #56 (Yackie-Yang) * SettingsSchemaSource: Add list_schemas() Add a create(), wrapping new_from_directory() (Daniel Boles) Issue #19, merge request !20 * DBus::Message::get_unix_fd_list(): Add refreturn (Kjell Ahlstedt) Issue #68 (kr.woaini) Tests: * Add glibmm_ustring_compare test (Thomas Holder) Issue #65 * Add glibmm_regex test (Thomas Holder) Issue #66, merge request !25 * Add glibmm_binding test (Daniel Boles) Merge request !18 gmmproc: * Add optional decl_prefix parameter to _CLASS_BOXEDTYPE, _CLASS_BOXEDTYPE_STATIC, _CLASS_GOBJECT, _CLASS_INTERFACE, _CLASS_OPAQUE_COPYABLE, _CLASS_OPAQUE_REFCOUNTED, _WRAP_GERROR Used for adding GLIBMM_API or similar for MS Visual C++ (Chun-wei Fan) Build: * Change the ABI to glibmm-2.66 (Kjell Ahlstedt) * Add Meson support (Chun-wei Fan, Kjell Ahlstedt) Merge request !27 * Drop gendef from Windows builds (Chun-wei Fan) Issue #12 (Mikhail Titov), merge request !29 Documentation: * Correct spelling of spawn_async_with_pipes() (Mike Fleetwood) Merge request !16 * Glib::Binding: Several doc improvements (Daniel Boles) Merge request !18 * Glib::Binding: Explain why SlotTransform takes GValue* (Kjell Ahlstedt) Issue #61 (Daniel Boles) * Gio::AsyncResult: Improve the class description (Kjell Ahlstedt) Issue #27 (Alberto Mardegan)

@egnha

# Version 2.0.0 * Memoise now uses caching objects from the cachem package by default. These caches support automatic pruning, so that they won't grow indefinitely. The older-style cache objects in the memoise package are still supported, but we suggest using new-style caches from cachem. (#112) * Name clashes between function arguments and variables defined when memoising no longer occur (@egnha, #43). * Add Google Cloud Storage support via `cache_gcs()` (@MarkEdmondson1234, #59) * Add `compress` option for non-memory caches (@coolbutuseless, #71). * Use absolute path in cache file system backend, so user can change working directory after using relative path (@xhdong-umd, #51, #65) * Add `drop_cache()` to drop the cached result for particular arguments (@richardkunze, #78) * Suppress messages of `aws.s3::head_object` within `cache_s3`'s `cache_has_key` to avoid printing of 404 messages for new keys (@stelsemeyer, #96).

@hadley

# fansi Release Notes ## v0.5.0 * [#65](brodieG/fansi#65): `sgr_to_html` optionally converts CSI SGR to classes instead of inline styles (h/t @hadley). * [#69](brodieG/fansi#69): `sgr_to_html` is more disciplined about emitting unnecessary HTML (h/t @hadley). * New functions: * `sgr_256`: Display all 256 8-bit colors. * `in_html`: Easily output HTML in a web page. * `make_styles`: Easily produce CSS that matches 8-bit colors. * Adjust for changes to `nchar(..., type='width')` for C0-C1 control characters in R 4.1. * Restore tests bypassed in 0.4.2. ## v0.4.2 * Temporarily bypass tests due to R bug introduced in R-devel 79799. ## v0.4.1 * Correctly define/declare global symbols as per WRE 1.6.4.1, (h/t Professor Ripley, Joshua Ulrich for example fixes). * [#59](brodieG/fansi#59): Provide a `split.nl` option to `set_knit_hooks` to mitigate white space issues when using blackfriday for the markdown->html conversion (@krlmlr).

@richfitz

# 1.3.0 * Adding authors with long names or other fields (`comment`, typically) works well now (#91). * `get_deps()` now removes unneeded whitespace from version requirements (#84). * `normalize()` now does not drop `Authors@R` on non-UTF-8 systems when it has non-ASCII characters (#80). * `has_dep()` now works well with dependencies listed multiple times (#97, @richfitz). * Add `coerce_authors_at_r()` method to convert `Author` to `Authors@R` (#44, @muschellij2). * `add_author()` and similar functions now allow a character vector of multiple roles (@niceume, #89). * `desc_set_deps()` now inserts new packages in (case-insensitive) alphabetical order, if the existing packages are already in alphabetical order. * New `add_author_gh()` method and `desc_add_author_gh()` function to add an author using the information available from GitHub V3 API. This method and function depend on `gh` and are limited when the GitHub user full name is incomplete or not well parsed by `as.person()` and when their email address isn't available (@maelle, #71). * When using `desc_normalize()` the package dependencies are now alphabetically sorted (#66, @llrs). * New `add_orcid()` method and `desc_add_orcid()` functions make it possible to add ORCID IDs to authors directly instead of via the `comment` argument (@maelle, #70). * All functions and methods managing authors (`add_me`, `add_author()`, `del_author()`, `add_role()`, `del_role()`, `change_maintainer()`, `search_for_author()`, `add_me()`, etc.) gain an `orcid` argument (@maelle, #70). * In `person()` within the `Authors@R` field, `comment` can now be a named character vector (@maelle, #69; @gvegayon, #65). * When using `desc(text=)` parameter, set `textConnection(encoding = "bytes")` to handle cases when the input text is in a different marked encoding than the default encoding, such as UTF-8 input on Windows.

1.1.1 (2021-07-26) Merged Pull Requests * Update chefstyle requirement from 1.7.1 to 1.7.2 #64 (dependabot-preview[bot]) * Update chefstyle requirement from 1.7.2 to 1.7.4 #65 (dependabot-preview[bot]) * Update chefstyle requirement from 1.7.4 to 1.7.5 #67 (dependabot-preview[bot]) * Upgrade to GitHub-native Dependabot #68 (dependabot-preview[bot]) * Drop support for EOL Ruby 2.4 #76 (tas50) * Fix failures on Ruby 3 #66 (tas50)

@dmurdoch

# waldo 0.3.0 * `compare()` is now considerably faster when comparing complex objects that don't have any differences (thanks to strategic use of `identical()`) (#86). * `compare()` gains two improvements to low-level diffs: * Structurally identical data frames (#78) and numeric matrices (#76) gain a row-by-row diff that makes it easier to see where exactly values differ. * An element-by-element diff will be automatically used if it's shorter than the "smart" diff. This improves diff quality when comparing two vectors that aren't really related (#68). * `compare()` gains a `list_as_map` argument thanks to an idea from @dmurdoch. It allows you to compare the behaviour of two lists when they are used to connect names to values (i.e. the list is operating as a map or dictionary). It removes `NULL`s and sorts named components (#72). * The objects involved in `compare()` (as opposed to the caller of `compare()`) gained much greater ability to control the comparison. * Objects can now contain a `waldo_opts` attribute, a list with the same names and valid values as the arguments to `compare()`, which overrides the default comparisons (@dmurdoch). * `compare_proxy()` is now called earlier (before type comparison) making it more flexible (#65). * `compare_proxy()` gains a second argument, `path`, used to report how the proxy changed the object. This makes it easier to see when and how a proxy is used (#73). * Proxies now exist for comparing RProtoBuf objects, converting them to proto text format (#82, @michaelquinn32). * Comparing a list with symbol to a list without that element no longer errors (@mgirlich, #79).

@sigmafelix

# version 2.0-7 * return `NA` as estimate when prediction/simulation fails; #80 # version 2.0-6 * fixes `object 'ret' not found` bug introduced by #63; #65 #66 #70 # version 2.0-5 * use multiple cores in `variogramST`, using pkg future; #63 by @sigmafelix * fix bug with conditional simulation using `stars` target grid and nsim=1, #58 # version 2.0-4 * fix CRAN warning issue # version 2.0-3 * fix bug in support for `sf` objects; #46 * fix `krigeTg` for the case when data or newdata are of class `sf` or `sfc`; #51

Change log: 2.7.0 ===== - Add showing categories as icons on top or bottom. (Issue #62) - Add hiding username. (Issue #36) - Add rounded profile picture. - Add optional AccountsService support. - Add catfish search action. - Add CSS classes for theming. - Improve search result relevance. - Make stripping release builds optional. - Rearrange settings dialog. - Remove sliding out search results. - Remove useless grab check. - Rename icon to follow reverse DNS scheme. - Replace size grip with resizing from edges. - Replace slots with lambdas. - Use original menu layout. - Use dm-tool for switching users. - Translation updates: Basque, Bulgarian, Chinese (Taiwan), Danish, Dutch, French, Greek, Lithuanian, Portuguese, Portuguese (Brazil), Slovak, Spanish, Swedish, Turkish, Ukrainian. 2.6.2 ===== - Fix background shifting when showing menu. (Issue #41) - Fix menu not toggling after pressing escape. (Issue #65) - Properly prevent interactive search in treeview. 2.6.1 ===== - Fix menu not toggling. (Issue #61) - Fix small icon in multi-row panels. (Issue #37) - Fix missing minimize and maximize buttons in settings dialog. - Replace deprecated code for grab check. - Translation updates: Greek, Slovak, Spanish. 2.6.0 ===== - Fix unable to resize with metacity. (Issue #56) - Fix invalid desktop files when hiding applications. (Issue #53) - Fix not showing focused launcher when searching. (Issue #45) - Add option to disable sorting categories. (Issue #42) - Translation updates: Arabic, Basque, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Czech, Danish, Dutch, Esperanto, Finnish, French, Galician, Georgian, German, Hungarian, Interlingue, Italian, Lithuanian, Polish, Portuguese, Portuguese (Brazil), Russian, Spanish, Swedish, Thai, Turkish, Ukrainian.

Change log: 4.16.0 ====== - settings: Accept all types of GIcon - settings: Adjust inline toolbar - Fix compilation with -Wmissing-prototypes - Don't warn when there are no saved sessions - bump glib (and gio, gthread, etc) minimum to 2.50.0 - Remove GSourceFunc casts - Update .gitignore - Add README.md to EXTRA_DIST - Translation Updates: Basque, Chinese (China), Czech, Danish, Estonian, French, Galician, Hebrew, Hindi, Indonesian, Italian, Lithuanian, Norwegian Bokmål, Portuguese, Portuguese (Brazil), Russian, Serbian, Slovenian, Turkish, Vietnamese 4.15.1 ====== - Fix potential crash in suspend and shutdown (Fixes #65) - Avoid potential format-string vulns (Issue #65) - settings: Tweak 'Current Session' tab - settings: Make 'App Autostart' columns sortable - settings: Fix 'Current session' column width (!10) - Add lock icon, 24px and 32px icons - Add more guards around GErrors - Update copyright year - Fix ifdef - Add README.md - Translation Updates: Armenian (Armenia), Basque, Belarusian (Tarask), Chinese (China), Czech, Danish, Eastern Armenian, Estonian, French, Hebrew, Hungarian, Indonesian, Norwegian Bokmål, Portuguese (Brazil), Russian, Slovak, Slovenian, Swedish, Turkish, Uyghur 4.15.0 ====== - Use new icon in settings dialog (Bug #16885) - Add new application icon and rDNS icon name - logout-dialog: Add new icons - logout-dialog: Bump icon size to 48px - Switch to symbolic window-close icons - Drop GDM compatibility code to avoid invalid session locale - Segfault when suspending without pm-suspend installed (Bug #16632) - Expand field codes - Add a GnuPG 2.1+ mode - Fix session crash at logout (Bug #16105) - Free the intermediate "cmd" variable in xfsm_startup_init() - Re-add xfsm_startup_shutdown() call to xfce4-session main() - Remove sys/sysctl.h on linux platform - Move from exo-csource to xdt-csource (Bug #16717) - Try xfce screensaver before cinnamon (Bug #16223) - Add support for xfce4-screensaver (Bug #16522) - Silence runtime warning (Bug #15731) - settings: Don't warn when there are no saved sessions (Fixes #62) - settings: Add sort-on-click to columns in "Current Session" tab (!3) - settings: Add keywords for discoverability (Bug #10694) - settings: Add tooltips to image-buttons - settings: Better app icon lookup - settings: Be more precise in infobar wording - settings: Drop inline-toolbar button labels - settings: Move autostart info to docs.xfce - settings: Don't make 'saved sessions' tab reorderable - settings: Sort saved sessions by most recently used (Bug #15338) - Add basic GitLab pipeline - Drop unused var - Bump copyright years - Only clean generated sources when in maintainer mode - Do not show translation info on --help output - Translation Updates: Albanian, Arabic, Armenian (Armenia), Basque, Belarusian, Belarusian (Tarask), Bengali, Bulgarian, Catalan, Chinese (China), Chinese (Hong Kong), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (Canada), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Norwegian Nynorsk, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Uighur, Ukrainian, Vietnamese

Change log: 0.12.1 (2021-11-26) ====== - Dependency Changes: - GLib >= 2.44.0 - Performance Improvement: - Optimize sorting by content type - Load images asynchronously (#16, #29, #32, !34) - Increase image loading buffer size (!34) - Appearance Changes: - Allow to display all files in the open dialog (!33) - Code Refactoring: - Rework the file opening procedure (!33) - Bug Fixes: - Fix a memory leak when closing the window directly - Refactoring: Clarify thumbnailer queue management - Thumbnailer: Do not empty an unprocessed file list - Update window title on image deletion or insertion - Perform content-based filtering wherever necessary - Set device scale for animated images - Properly recognize SVG compressed image files - Use the generic pixbuf loader for RAW image files - Fix pointer behavior in fullscreen mode - Icon bar: Properly highlight item under the cursor - Icon bar: Center on the active item for any size change - Fix regression: Exif orientation is not respected (#69) - Do not try to load images whose pixbuf is not available (!34) - Fix memory management of image loading objects (!34) - Use URIs instead of filenames in the `.desktop` file (#49) - Directory loading: Allow to load a directory via the cli - Flatpak: Access remote locations with GVfs - Directory loading: Fix improper use of GFileEnumerator APIs (#68) - Translation Updates: Albanian, Arabic, Armenian (Armenia), Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Uyghur 0.12.0 (2021-10-11) ====== - Dependency Changes: - libxfce4ui >= 4.16.0 - libxfce4util >= 4.16.0 - New Features: - Allow to choose the default scale (!29) - Keep the scale in memory for each loaded image (#7, #17, !28) - Toggle fullscreen mode by double clicking on the image - Performance Improvement: - Optimize directory loading (#20, #22, #32, #37, !31) - Optimize image viewer redraw: Disable overlay scrolling (#64) - Optimize image viewer redraw: Reuse source surface (#64, !26) - Avoid using Cairo Xlib backend to create surfaces (#60, #61, #62, !25) - Optimize image viewer redraw: Animation (#64) - Optimize image viewer redraw: Background color (#64) - Optimize image viewer redraw: Clock (#64) - Optimize image viewer redraw: Selection box (#64) - Don't redraw the main window when it loses focus (#64) - Remove the shadow of the toolbar buttons (#51, #64) - Appearance Changes: - Hide thumbnail scrollbar when unused (!24) - Use the same background for the image and the thumbnails (#36, !23) - Drop preferences-desktop-default-applications icon - Code Refactoring: - Flatpak build (!32) - Refactoring: Use only one file filter for the app - Refactoring: Icon bar adjustments - Cleanup: `icon_bar.c` - Cleanup: Pass orientation directly from file to viewer - Code refactoring: Image viewer adjustments, scale and drawing (!27) - Use integers for the image rendering rectangle - Code cleanup: Build sanitation, obsolete code removal, spacing, normalization (!22) - Transfer contents from dispose() to finalize() - Add debugging macros - Bug Fixes: - Protect asynchronous jobs from an application exit - Fix position of the active item in the icon bar when vertical (#34) - Take into account the device scale (#47, !30) - Properly load images via drag and drop (#67) - Delay GdkPixbufLoader "closed" signal handler - Use the same scale factor to zoom via action and scrolling - Fix a lack of centering when zooming via the menu action - Fix some memory leak (several commits of this kind) - Fix file creation monitoring - Try to display the image on `GDK_PIXBUF_ERROR_CORRUPT_IMAGE` (#39) - Always set adjustment upper bounds greater than page sizes (#35) - Scaling/zoom corrections (#30, !8) - Fix animated GIF display - Automate and sanitize memory management of sources (#65) - Fix `rstto_icon_bar_rows_reordered()` (#48) - Chain up to parent in dispose() and finalize() - Translation Updates: Albanian, Arabic, Armenian (Armenia), Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Uyghur 0.11.0 (2021-06-11) ====== - Update copyright years and appdata infos - Enable `HAVE_MAGIC_H`-delimited code - Fix compilation warnings - autoconf: Some updates - Update `.gitignore` - Add option to copy image to clipboard (!20) - Allow dragging window when CSD is used (#52) - Remove GSourceFunc casts - Added new stock icons with reverse DNS format - Updates README.md - Include string.h - Codebase cleanup (!7) - Make build less verbose - Update .gitignore - Make sure that argument passed to strncmp is non-NULL (!1) - privacy_dialog.c: Remove dead initialization (!2) - image_list.c: Remove dead assignment (!2) - Add basic GitLab pipeline - Switch to README.md and foreign automake mode - Bug #16717: Move from exo-csource to xdt-csource - Resolve couple "cast between incompatible function types" warnings - Fix memory leaks in Privacy Dialog - Resolve deprecation warnings - Resolve some deprecation warnings - Clean up unused functions - Rename vars and funcs: show -> hide - Add inactivity timeout setting to Preferences - Hide the cursor while inactive in fullscreen mode - Fix 'Status bar appears upon leaving fullscreen' - Update .gitignore - Do not show translation info on --help output - Fix "window-state-event" handler - Update credits - Add support for old gtk2-style bg color settings - Add missing LDFLAGS (fixes build on *bsd) - In fullscreen mode, show toolbar when the mouse pointer is moved to the top - Return to git versioning - Translation Updates: Albanian, Arabic, Armenian (Armenia), Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Telugu, Thai, Turkish, Ukrainian, Uyghur

1.2.2 Fix #65: new crash when missing `meta` parameter Older changes not found.

@Builditluc

What's Changed Exciting New Features Add toc position setting by @Builditluc in #65 Add more toc settings by @Builditluc in #66 Bug Fixes Fix toc not having scrollbars by @Builditluc in #64 Fix Word Spacing by @Builditluc in #68 Fix the crash that occurs when no links or headers exist by @Builditluc in #70

Change log: 4.16.1 (2022-08-11) ====== - gst-thumbnailer: Add mime type check (Fixes #65) - desktop-thumbnailer: Guard against null path - Fix typo in gthread version (!14)

2.2.0 (2022-06-03) Added * Add the ability to set Content-ID header for ParamPart #62 * Allow mixed key types for parts headers #79 Changed * Refactor Parts into a Multipart::Post namespace #65 * Use mutable strings where needed #70 * Use frozen_string_literal everywhere #78 2.2.1 (not released) 2.2.2 (2022-06-09) * Drop Ruby 2.5 or earlier 2.2.3 (2022-06-10) * Add support for Ruby back to 2.3.

@wishdev

1.7.0 (2022-11-17) What's Changed * Extract creation of Net::HTTP in httpproxy by @wishdev in #41 * Fix httpd error in CJK directory by @jeremyevans in #42 * Use GitHub Actions instead of Travis CI (retry) by @deivid-rodriguez in #40 * Skip env-locale-sensitive CGI test on the "java" platform by @headius in #46 * Make readpartial limit chunk to appropriate size by @wishdev in #45 * Do not use ensure in a block without begin by @jeremyevans in #49 * Allow empty POST and PUT requests without content length by @jeremyevans in #50 * Only run test_big_bodies test on Ruby 2.5+ by @jeremyevans in #51 * Fix test when run with US-ASCII encoding by @jeremyevans in #52 * Allow shutdown_pipe to be passed in via @config by @wishdev in #44 * Ensure server port numbers are numeric and ensure they are stored as ... by @wishdev in #55 * Fix shutdown_pipe test issue by @wishdev in #54 * Allow EPROTOTYPE error when writing junk to a socket by @jeremyevans in #56 * Use ruby/setup-ruby instead of actions/setup-ruby by @hsbt in #58 * Refix test_shutdown_pipe by @wishdev in #59 * add mime type of extention mjs by @paulownia in #60 * Make it more strict to interpret some headers by @mame in #61 1.8.0 (2023-01-27) What's Changed * Use frozen strings by @kirs in #65 * Use test-unit by @hsbt in #66 * More rubies on CI, deprecating ruby 2.3 due to test failure by @mathieujobin in #68 * Adds common mime types by @gotoken in #75 * add mime type for .webmanifest extension by @olleolleolle in #76 * CI: use bundler-cache: true by @olleolleolle in #79 * Typo by @printfinn in #78 * s/RubyVM::JIT/RubyVM::MJIT/g by @k0kubun in #82 * Fix invalid use of IP addresses in SNI by @jeremyevans in #83 * Bump actions/checkout from 2 to 3 by @dependabot in #91 * remove unneeded bin/console and bin/setup files from gemspec by @Benjamin-L in #94 * Accept put requests by @bharjr01 in #70 * Move the host request parsing to a separate method. by @wishdev in #85 * Only output prime information to $stderr if $VERBOSE by @jeremyevans in #88 * Better support for connection upgrade and bi-directional streaming. by @ioquatix in #101 1.8.1 (2023-01-27) What's Changed * Body should be non-frozen by default. by @ioquatix in #103 * Join test thread. by @ioquatix in #104 * Fix several regexp warnings. by @ioquatix in #105

This release will include the following changes: - Fetch scrollback history independently of main loop #39 - Add NetBSD install instructions #51 - Create release profile with LTO #52 - Support configuring client request timeout #54 - Link to iamb space in README #55 - Fix empty message check when sending #56 - Show events that couldn't be decrypted #57 - Allow log level to be configured #58 - Indicate when an encrypted room event has been redacted #59 - Lazy load room state events on initial sync #62 - HTML self-closing tags are getting parsed incorrectly #63 - Emote messages should always show sender #65 - Update README.md to include Arch Linux package #66 - Redacted messages need to have their HTML removed #67 I'm also going to update to modalkit@0.0.14 to pull in two useful bug fixes: - List widget should only use focus for rendering item modalkit#102 - Vim keybinding D has wrong Count modalkit#103

Fixes - Fixed AppImage build for systems without OpenSSL 1.1 (#182). - Fixed build errors on MinGW (#193). - Fixed not being able to change volume on some styles (#206). - Fixed crash when playing library items with many tracks (#208). - Fixed MPRIS support on Qt 6. - Fixed side panel tabs not working on some styles. - Fixed not showing tool-tip for added date in albums. - Fixed using Fusion style when saving settings with default selected. - Fixed not displaying artist names with "&" properly. - Fixed flat buttons having a background with built-in dark theme. - Fixed not refreshing some cached albums correctly. Changes - Added automatic re-authentication if token expired (#64). - Improved error handling when setting client path (#65). - Added support for saving passwords on more Linux systems, macOS, and Windows (#70). - Added column for track liked status (#138). - Disallowed actions are now disabled (#186). - Added support for media keys on Windows (#192). - Client volume is now remembered instead of always being 100% (#196). - Added options for copying name of playlist/track/album (#203). - Added support for librespot v0.5.0 (#210). - Added back lyrics. - Now uses a native menu bar on macOS. - Improved startup performance. - Replaced "Save password in keyring" option with "Remember me" in password entry. - Added Apple Silicon support for macOS builds. - Replaced "fixed width remaining time" with custom fixed-width system font.

@mauke

Upstream changes: 2.71 2023-04-05 - The docs for the Screen output were never updated after the changes in 2.50, when it reverted back to using STDOUT or STDERR directly. This led to a lot of the docs being confusing and wrong. Reported by @mauke. GH #65, #66, and #67.

Bug Fixes - pwsh: remove hack that solves a pwsh bug (0afa088), closes #65

Bug Fixes - pwsh: patch PowerShell color bleed (aa51cd6), closes #65

@patrickt

Switch to GH Actions CI. by @patrickt in #41 Add the same PR template as for tree-sitter-javascript by @mjambon in #43 Update package.json to include the repository key by @msftenhanceprovenance in #50 Loosen Rust crate's tree-sitter dependency by @dcreager in #52 adding make support by @mattmassicotte in #56 feat: treat iota as predeclared identifier by @kawaemon in #58 feat: add support to parse of type parameters by @kawaemon in #57 feat: allow to put type arguments in calling expressions by @kawaemon in #59 Update C code by @aryx in #66 Document reason for statements at top level by @adonovan in #67 Make method bodies non-optional by @adonovan in #68 Fix node naming in {param,field}_declaration by @adonovan in #65 Structure Query by @mattmassicotte in #70 Remove field_identifier from keyed_element by @adonovan in #71 Generic Makefile by @mattmassicotte in #72 Bump tree-sitter version to 0.20 by @hendrikvanantwerpen in #78 Swift Package by @mattmassicotte in #79 Made body optional for method_declaration by @lmaruvada in #90 Allow GenericType to accept QualifiedType by @kawaemon in #92 feat(queries/highlight): highlight built-in functions as @function.builtin by @jimeh in #96 feat(grammar): capture comment directives by @matoous in #97 Revert "Merge pull request #97 from matoous/md/comment-directives" by @matoous in #98 feat(ci): run build & test action on PRs by @matoous in #99 fix: fix string literal rule by @SuperBo in #91 Add more types and struct/parameter fix by @amaanq in #118 Param fix by @amaanq in #119 Update identifiers and top level declarations by @amaanq in #120 Fix single import spec list without terminator by @amaanq in #122 Materialize expression_statement nodes by @josharian in #124 Formatting & CI fixes by @amaanq in #126

@patrickt

Switch to GH Actions CI. by @patrickt in #41 Add the same PR template as for tree-sitter-javascript by @mjambon in #43 Update package.json to include the repository key by @msftenhanceprovenance in #50 Loosen Rust crate's tree-sitter dependency by @dcreager in #52 adding make support by @mattmassicotte in #56 feat: treat iota as predeclared identifier by @kawaemon in #58 feat: add support to parse of type parameters by @kawaemon in #57 feat: allow to put type arguments in calling expressions by @kawaemon in #59 Update C code by @aryx in #66 Document reason for statements at top level by @adonovan in #67 Make method bodies non-optional by @adonovan in #68 Fix node naming in {param,field}_declaration by @adonovan in #65 Structure Query by @mattmassicotte in #70 Remove field_identifier from keyed_element by @adonovan in #71 Generic Makefile by @mattmassicotte in #72 Bump tree-sitter version to 0.20 by @hendrikvanantwerpen in #78 Swift Package by @mattmassicotte in #79 Made body optional for method_declaration by @lmaruvada in #90 Allow GenericType to accept QualifiedType by @kawaemon in #92 feat(queries/highlight): highlight built-in functions as @function.builtin by @jimeh in #96 feat(grammar): capture comment directives by @matoous in #97 Revert "Merge pull request #97 from matoous/md/comment-directives" by @matoous in #98 feat(ci): run build & test action on PRs by @matoous in #99 fix: fix string literal rule by @SuperBo in #91 Add more types and struct/parameter fix by @amaanq in #118 Param fix by @amaanq in #119 Update identifiers and top level declarations by @amaanq in #120 Fix single import spec list without terminator by @amaanq in #122 Materialize expression_statement nodes by @josharian in #124 Formatting & CI fixes by @amaanq in #126

Change log: 1.5.6 (2023-10-02) ===== - Update copyright year - Rounded legend icons - Reopen process window maximized when closed maximized - Properly finalize global objects in main - Add missing include - Fix more memory leaks - Fix memory leak - Fix CSS related deprecation warnings - Ignore GtkStatusIcon related deprecations - Make libx11 optional, guard x11 code paths - Change type so that memory values are correct (Fixes #65) - settings-dialog: Fix untranslated label - Add icons at missing sizes, clean up SVG metadata - Add minimal support for Wayland - Fix graph drop off on the right side - Change graph peak variable to double - Remove timeout before exiting main loop - build: Add GLib requirement - Do not treat missing swap as error on OpenBSD and NetBSD - Fix process filter crash caused by the use of an uninitialized variable - Translation Updates: Albanian, Arabic, Armenian (Armenia), Asturian, Azerbaijani, Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Hong Kong), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Persian (Iran), Polish, Portuguese, Portuguese (Brazil), Russian, Serbian, Slovak, Spanish, Swedish, Telugu, Thai, Turkish, Ukrainian, Uyghur

Changelog f9d9ab2 Add drag-and-drop queue reordering, closes #34 (#80) 981861c Add german translation. (#68) 4d4325e Add missing launchable element. (#65) f482541 Allow adding/replacing of all tracks in Library by Files context menu (resolves #69) d7c40b5 Fix drag-n-drop beyond list end (#34), other optimisations d1dcc10 Fix dragging an item down (#34) abd7f2e New icon (#79) 8f8e02c Remove warnings about non-existent/empty Ymuse config (resolves #70) 30853bf Support for single-track repeat (resolves #76) adf6e7b Use remote icon in AppStream metadata (resolves #66) 95c0d15 chore: release 0.22

Overview of changes in GLib 2.78.0, 2023-09-08 ============================================== * Bugs fixed: - #3095 Error handling of invalid GKeyFile string escape sequences changed in GLib 2.77.3 (Philip Withnall) - !3559 gdb: Workaround optimized out quark_seq_id - !3561 meson: fix `gnetworking.h` install tag - !3562 gthread: Annotate g_thread_exit() with G_NORETURN - !3564 Fix gutils-user-database unit test Overview of changes in GLib 2.77.3, 2023-08-31 ============================================== * Bugs fixed: - #2575 GSettings schemas default value translations don't work when using l10n=time (Michael Catanzaro) - #3032 gdbus-codegen eats indentation in RST in XML comments (André) - #3051 g_dbus_connection_export_menu_model() is not thread_safe - #3061 Possible SEGV (null pointer deref) in distribute_method_call() (Philip Withnall) - #3083 `arg_data` in GOptionEntry is not a list (Philip Withnall) - #3090 Possible SEGV (null pointer deref) in _g_resource_file_new() (Philip Withnall) - !3459 glib-unix: Clean up use of O_NONBLOCK - !3503 interim solution for macOS CI - !3519 meson: warn if -mms-bitfields is necessary - !3526 gnetworkaddress: use reentrant getservbyname_r() if available - !3527 tests: Use g_assert_*() rather than g_assert() in tree tests - !3528 gio-tool-info: Move translator comments so they’re visible - !3530 gregex: set default max stack size for PCRE2 JIT compiler to 512KiB - !3532 tests: Disable use of ptrace() in tests on BSD and macOS - !3533 ci: Only run pages CI job on scheduled job runs - !3534 ci: Further fix to pages CI job - !3535 Use 'meson setup' to configure - !3538 glib-unix: Accept O_CLOEXEC as well as FD_CLOEXEC in g_unix_open_pipe() - !3540 gio: Add gresource.dtd - !3541 gtestutils: Mention not ignoring SIGCHLD in g_test_trap_subprocess() docs - !3542 [th/gchildwatch-fail-message] gmain: improve g_warning() for failure in g_child_watch_dispatch() - !3543 [th/use-localtime-r] use localtime_r() in g_log_writer_format_fields() - !3545 gregex: if JIT stack limit is reached, fall back to interpretive matching - !3547 glib/gfileutils.c: use 64 bits for value in get_tmp_file() - !3550 glib/tests/asyncqueue.c: skip test_async_queue_timed in 2038 or later - !3553 Generate missing docs for out arguments - !3555 gkeyfile: Fix overwriting of GError Overview of changes in GLib 2.77.2, 2023-08-12 ============================================== * Bugs fixed: - #3071 g_test_trap_subprocess and g_test_subprocess broken in 2.77.1 (Jonas Ådahl) - !3432 ci: Don’t run pipeline after merging a MR - !3520 Fix typos - !3521 GTree: Handle node counter overflow and return it as an unsigned value - !3523 gspawn, gdataset: Restore nullable callback functions Overview of changes in GLib 2.77.1, 2023-07-30 ============================================== * Fix some regressions with `GKeyFile` comment handling (#3047, work by Gaël Bonithon) * Improve handling of query and fragment components in `file:` URIs (#3050, work by Lukáš Tyrychtr) * Bugs fixed: - #473 systemtap probes for gvariant (Allison Karlitskaya) - #623 g_type_query() doesn't work for dynamic types (Philip Withnall) - #931 Optimise GPrivate by removing one malloc (Allison Karlitskaya) - #2929 gio: Failing build due to race generating glib/gversionmacros.h (Eric van Gyzen) - #3045 2.77.0: gio pkg-config test has incorrect install location for gio- querymodules & glib-compile-schemas (Philip Withnall) - #3047 2.77.0 changes formatting of keyfiles (Gaël Bonithon) - #3048 Forcing fallback for libintl does not work (Brendan Shanks) - #3050 g_file_new_for_uri() handles query strings incorrectly ("?") (Lukáš Tyrychtr) - #3054 Fedora installer (anaconda) crashes early with glib 2.77.0 due to "Attempt to unlock mutex that was not locked", when it runs `hwclock` and changes the system time (Thomas Haller, Philip Withnall) - !3287 Audit and fix incorrect use of (closure) in glib - !3461 gfileinfo: add file_path methods for language bindings - !3485 docs: Expand supported platforms documentation a little - !3494 ci: Manually fetch submodules for style-check CI jobs - !3495 gdbus-codegen: Error on invalid dbus types - !3496 garray: Fix typo in doc comment of g_ptr_array_sort[_with_data]() - !3499 strfuncs: Add missing ownership annotations for returned string vectors - !3504 Revert "build/gmodule-2.0.pc: Move compiler flags from Libs to Cflags" - !3505 meson: help gobject-introspection locate source and build dirs - !3509 build-sys: drop -mms-bitfields GCC flag - !3510 testutils: Use prctl PR_SET_DUMPABLE to silence core dumps on Linux - !3514 Revert "build-sys: drop -mms-bitfields GCC flag" - !3515 gnetworkmonitor: Expand guidelines for metered data use - !3517 tests: Add some more tests for g_type_query() - !3518 m4macros: drop unused m4 files Overview of changes in GLib 2.77.0, 2023-07-06 ============================================== * Fix `GSocketClient` connecting to a proxy if the port is not specified (#2832, work by Michael Catanzaro) * Support using `copy_file_range()` in `g_file_copy()`, if available (#2863, work by Philip Withnall) * Improve handling of comments above groups in key files (#2927, work by Gaël Bonithon) * Re-upgrade missing attribute debugs to criticals in `GFileInfo` (#2951, work by Philip Withnall) * Do not redefine NULL on C++ (#2973, work by Marco Trevisan) * Make `g_signal_handlers_block_matched()` work for `G_SIGNAL_MATCH_ID` (#2980, work by Przemyslaw Gorszkowski) * Fixes to support building with bionic libc better (#3008, work by Øyvind Kolås) * Fix potential stack overflow in gspawn on macOS if open file limit is very high (#3024, work by Dario Saccavino) * Fix support for `--force-fallback-for libpcre` in meson configuration (#3025, work by Marius Kintel) * Generate specific marshallers in `gdbus-codegen` (#3028, work by Marco Trevisan) * Fix build failure on Android with `statx()` support (#3039, work by Philip Withnall) * Improve locking performance of `GSignal` (!2824, work by Marco Trevisan) * Improve locking performance of `g_main_context_iterate()` (!3235, work by Marco Trevisan) * Add an inline definition of `g_free()` to automatically use `g_free_sized()` if available (!3252, work by Marco Trevisan) * Fix race with `waitpid()` and `GChildWatchSource` (!3353, work by Thomas Haller) * Add `glib_valgrind_suppressions` variable to glib pkg-config file (!3361, work by Marco Trevisan) * Fix build on macOS SDK 10.11 (!3385, work by Peter Williams) * Switch to using a separate thread pool and support timeouts in `GThreadedResolver` (!3397, work by Philip Withnall) * Track pending `GTask`s if `G_ENABLE_DEBUG` is defined (!3404, work by Philip Withnall) * Support GSignal fast path and more marshallers in `gobject_gdb.py` (!3437, work by Nelson Ben) * Disable the macOS CI because it’s too unreliable — if you rely on GLib working on macOS, please get in touch and do something to help! (!3463, decision taken by Philip Withnall) * Bugs fixed: - #65 glib-mkenums: parse_trigraph() chokes on quoted commas (Emmanuel Fleury) - #95 GMarkupParser documentation completion (David King) - #98 g_get_current_dir SIGSEGV on long path (Philip Withnall) - #104 Invocation of the interface "g_key_file_remove_comment" does not remove comment in specific case (Gaël Bonithon) - #116 Document UTF-8 behaviour and requirements throughout GLib (Philip Withnall) - #252 Disagreement between runtime and docs on whether interfaces are "classed" (Philip Withnall) - #322 gdbus-example-proxy-subclass.c is not complete. (Colin Walters) - #799 GAppInfoMonitor documentation deficiencies (Philip Withnall) - #1264 Use-after-free under send_message_with_reply_cleanup():gdbusconnection.c:1792 (Philip Withnall) - #2289 Document clearly that libgio is not guaranteed to be safe to use in setuid processes (Philip Withnall) - #2307 mainloop test leaks a GMainLoop object (Philip Withnall) - #2829 "glib-compile-resources --dependency-file=DEPFILE" creates wrong set of dependencies (Michael Catanzaro) - #2832 GSocketClient cannot proxy connect unless default port is explicitly specified in proxy URL (Michael Catanzaro) - #2855 gio/tests/socket-client.c name is too confusing because it does not use GSocketClient (Mike Salmela) - #2861 Check for __kernel_long_t when enabling futex() - #2863 Use copy_file_range() whenever possible in g_file_copy (Philip Withnall) - #2864 Documentation mentions non-existing function `g_value_free` (Philip Withnall) - #2879 Job #2498619 failed: gio/tests/socket.c:1654:test_reuse_tcp: assertion failed (error == (g-io-error-quark, 33)): error is NULL (Philip Withnall) - #2927 GKeyFile: Inconsistent behavior of comment writing above a group (Gaël Bonithon) - #2939 mkenums.py test fails on FreeBSD (Philip Withnall) - #2951 Re-upgrade missing attribute debugs to criticals in GFileInfo (Philip Withnall) - #2952 Not clear that GPollableInputStream methods are undefined if can_poll() returns FALSE (Philip Withnall) - #2953 Missing docs for GOption (commandline parser) (Sam Thursfield) - #2958 nbd server fails with glib 2.76.0 - #2960 GDebugControllerDBus wrong default in documentation (Philip Withnall) - #2963 Probably wrong information regarding G_PLATFORM_WIN32 in README.win32.md - #2965 test_measure fails with coreutils 9.2 (Joan Bruguera) - #2966 Multiple Definition Error When Generating gio/tests/test5.gresource (Dan Yeaw) - #2969 user docs: GLib.DateTime.format: broken highlighting (Philip Withnall) - #2972 GtkFileLauncher: generated paths not recognized on Win32 (Luca Bacci) - #2973 Build failed due to NULL pointer redefinition in C++ (Marco Trevisan (Treviño)) - #2980 g_signal_handlers_block_matched does not work for G_SIGNAL_MATCH_ID (Przemyslaw Gorszkowski) - #2982 Build randomly fails with: 'gmodule/gmodule-visibility.h' file not found (Marco Trevisan (Treviño)) - #2993 g_dbus_interface_skeleton_get_vtable misses transfer annotation and is not introspectable - #2997 g_assert_cmpuint() should display positive, not negative values (Eric Blake) - #3003 glib-compile-schemas failed on directory name with no Latin symbols (Daniyar Tleulin) - #3007 GOptionContext group headings missing colon at the end (Philip Withnall) - #3008 Adaptations for building with bionic libc under termux (Øyvind Kolås) - #3020 Races in gio/tests/portal-support-snap* tests - #3024 Possible stack overflow in gspawn on MacOS - #3025 libpcre and libintl cannot be chosen to use the builtins - #3027 action exporter fails in the presence of actions with maybe parameter types (Matthias Clasen) - #3028 gdbus-codegen should generate marshallers (Marco Trevisan (Treviño)) - #3030 Document GListModel requiring unique instance pointers from GListModelInterface.get_item (Christian Hergert) - #3034 futex based g_mutex_lock sometimes splatters errno with EAGAIN on contended locks - #3039 Build failure due to statx fields with NDK r25.c (Philip Withnall) - #3040 gtester in custom_target() run against system rather than built libglib during build - !2824 gsignal: Reduce lock/unlock pairs and ensure we always work on valid signal nodes - !3146 Make GVariant/GHash opaque types compatible with CHERI - !3235 gmain: Avoid some lock/unlock dance during g_main_context_iterate - !3252 gmem: Add an inline definition of g_free() to automatically use g_free_sized() - !3289 Work around an UCRT issue with _wspawn() functions taking an envp block - !3306 gregistrysettingsbackend: Allow a different root key path - !3308 doc: Workaround missing API index - !3314 gmain: More explicitly document g_main_context_release() prereqs - !3326 unicode: add tests for g_utf8_normalize() and empty strings - !3333 build: Drop old .gitignore files from test directories - !3335 meson: allow -Dlibelf=enabled without pkg-config - !3337 gio-tool-info: Fix a duplicate attribute name in the UI - !3340 meson: Move msvc_recommended_pragmas.h to a subdirectory - !3341 g_utf8_normalize: don't read past the end of the buffer - !3342 Add fuzzing harness for g_utf8_normalize() - !3344 tools: Drop check-abis.sh script - !3345 docs: Drop section about default branch renaming from README.md - !3347 gsocket/inotify/gwakeup: Use SOCK_NONBLOCK and O_NONBLOCK to avoid fcntl() syscalls where possible - !3351 tests: Update Unicode normalisation tests from Unicode 15 - !3352 meson: Fix detection of a system-provided proxy-libintl - !3353 [th/child-watch-waitpid] fix race with waitpid() and child watcher sources - !3356 build/gmodule-2.0.pc: Move compiler flags from Libs to Cflags - !3357 Make clang++ happier when using G_STATIC_ASSERT - !3361 meson: Add glib_valgrind_suppressions variable to glib pkg-config file - !3365 gwin32: Avoid use of function call with side effect in g_return_* macro - !3366 Add init macros for refcounting types - !3367 actiongroup: Add a compiler warning - !3371 Explicitly mark size parameter as (in) - !3377 gsignal: Clarify documentation for GSignalMatchType matching - !3378 build: Post-release version bump - !3381 gtimer: Avoid doing anything on g_usleep (0) - !3382 gsocket: Explicitly mark size parameter as (in) - !3383 add g_timeout_add_seconds_once - !3384 Test g_signal_handlers_disconnect_matched for G_SIGNAL_MATCH_ID match - !3385 gio: fix build on older macOS SDKs - !3388 appmonitor: Skip the test under OSX - !3389 glib/tests/[rec-]mutex: Allow each thread to work - !3390 Fix error format in gio/gunixconnection.c (part 2) - !3392 gvariant: Fix doc for g_variant_new_object_path - !3393 Fix small issues in docs - !3395 gtask: Document that g_task_run_in_thread() uses a shared resource - !3396 glib-unix: Improve documentation for g_unix_fd_source_new() - !3397 gthreadedresolver: Switch to using a separate thread pool and support timeouts - !3398 Avoid having g_futex_simple() inadvertently modify errno - !3399 meson: wrap html documentation generation with gtk_doc option - !3400 restore error messages in gunixconnection while maintaining older compiler support - !3401 ci: Disable the Coverity CI job - !3404 gtask: Track pending GTasks if G_ENABLE_DEBUG is defined - !3405 gthreadedresolver: Remove some incorrect assertions - !3406 gthreadpool: Clarify that item_free_func is not normally called - !3407 gregistrysettingsbackend: Remove translatable pspec nick/blurb - !3408 docs: Update/Drop txt documents from docs directory - !3409 docs: Don’t ignore gunixfdlist.h when building docs on Windows - !3410 tests: Add descriptions to environment tests - !3416 gtestutils: Fix section marker in documentation - !3418 docs: Add lb90 as a Windows maintainer - !3419 docs: Update various broken/redirected links and fix list formatting - !3420 gtestutils: print timing information per test case in TAP output - !3421 glib/tests/fileutils:fix asserts when running as root - !3422 Check for linux/netlink.h buildability - !3423 gstring: add g_string_new_take - !3425 gwin32networkmonitor: Fix returning address of local variable - !3426 gdataset, gobject: Use atomic compare and exchange full to set pointers - !3429 Rename GTK+ to GTK (mostly comments and documentation) - !3430 gobject_gdb.py: fix regression caused by bfbe7127d5 - !3431 gfile: Ensure loff_t is defined on FreeBSD - !3435 Ignore g_task_print_alive_task() when introspecting GIO - !3437 gobject_gdb.py: support gsignal fastpath and detect more marshallers - !3438 gio: Check cancellable iterating local file enumerator - !3439 gstring: Add `Since` marker to `g_string_new_take()` - !3440 gutf8: Add a g_utf8_truncate_middle() function - !3441 Allow proper introspection of GTypeValueTable - !3442 gio: Add g_file_new_build_filenamev - !3448 meson: try iconv in libintl lookup - !3449 docs: Move README.win32.md to the docs folder and update CONTRIBUTING.md - !3450 gactionmap: Add g_action_map_remove_action_entries() - !3453 docs: Use the type name as the section name for GKeyFile - !3455 gfileinfo: add (type filename) annotation to symlink_target functions - !3456 gmain: Document that g_steal_fd() preserves errno - !3458 gstdio: Improve documentation of some functions as async-signal safe - !3462 tests: Reduce thread and iteration count on CI for /thread/rec-mutex3 - !3463 ci: Disable the macOS CI - !3465 gobject_gdb.py: adapt to recent gsignal changes - !3466 resolver: Add space in documentations - !3470 pcre subproject fixes: Allow fallback & static build - !3471 gio-tool-mount: Add option to show progress when unmounting - !3472 tests: Fix an intermittent timing error with testing g_usleep(0) - !3477 gdbus-codegen: Fix some minor typos in the documentation - !3484 docs: Fix a typo in the backports policy - !3486 docs: Document issue and merge request triaging and review guidelines - !3488 codegen: Use g_signal_emit to emit signals - !3489 guniprop: fix param direction in g_unichar_get_mirror_char(), for introspection - !3490 gobject/tests: Fix running on 32-bit Windows

1.1.13 (2023-09-18) Merged Pull Requests * Update chefstyle requirement from 2.0.9 to 2.1.0 #62 (dependabot[bot]) * Update chefstyle requirement from 2.1.0 to 2.1.1 #63 (dependabot[bot]) * Update chefstyle requirement from 2.1.1 to 2.1.3 #65 (dependabot[bot]) * Update chefstyle requirement from 2.1.3 to 2.2.0 #66 (dependabot[bot]) * add ruby 3.1 in verfiy pipeline #69 (skeshari12) * INFC-158 fix build from addition of Ruby 3.0/3.1 tests for Windows #71 (tpowell-progress) * Bundle pristine to patch 3.1 ruby #78 (tpowell-progress) * Expose archive format compression methods #74 (sj26) * Allow opening archive from fd #75 (sj26) * Add .buildkite directory to fix the build #79 (tpowell-progress)

@hsbt

devel/ruby-redmine51 require net-imap gem version 0.3.4 but ruby31 bundles 0.2.3. So, it add latest version of net-imap gem 0.3.x as ruby-net-imap. Ruby client api for Internet Message Access Protocol. Changes from 0.2.3: 0.3.0 (2022-11-17) What's Changed * Added dependabot.yml for actions by @hsbt in #59 * Bump actions/checkout from 2 to 3 by @dependabot in #60 * Adding RFC licenses by @nevans in #57 * Warn when using deprecated SASL mechanisms by @nevans in #62 New Contributors * @dependabot made their first contribution in #60 0.3.1 (2022-11-17) What's Changed * Add XOAUTH2 authenticator by @ssunday in #63 New Contributors * @ssunday made their first contribution in #63 0.3.2 (2022-12-09) What's Changed * Support UIDPLUS extension by @hoffi in #65 * Fixes "bundle exec rake" clash with test/unit by @nevans in #67 * Fix some UIDPLUS issues by @nevans in #69 * Fixes date-time format, and adds decode_datetime by @nevans in #66 * Add SASLprep. Code generated & tested with RFC3454 by @nevans in #64 * Add the UNSELECT command by @nevans in #72 * Fix mailbox attrs by @nevans in #73 * RFCs and references by @nevans in #71 * Nodocs and remove warning by @nevans in #70 * ResponseParser docs by @nevans in #76 * Response Data docs by @nevans in #75 New Contributors * @hoffi made their first contribution in #65 0.3.3 (2022-12-21) What's Changed * Revert "Fixes "bundle exec rake", clash with test/unit" by @znz in #88 New Contributors * @znz made their first contribution in #88 0.3.4 (2023-01-18) What's Changed * Net::IMAP Client docs by @nevans in #74 0.3.5 (2023-06-12) * Fix #response documentation error, by @nevans in 87ba74e * Add RFC3454 data, to support offline testing, by @nevans in #137 * Adds Ruby 3.2 to the CI matrix, by @petergoldstein in #99 * Use reusing workflow, by @hsbt in #151 * Decode UTF-7 more strictly, by @nobu in #152 * ️Continue testing 0.3.x branch against ruby 2.6, by @nevans in 115d190 * Fix decode utf-7 test for ruby 2.6, by @nevans in 7a60c8f * Fix XOAUTH2 authenticator for ruby 2.6, by @nevans in bd4faa0 0.3.6 (2023-06-12) * Fixes file permissions regression in v0.3.5 release, reported by @aaronjensen in #154 0.3.7 (2023-07-26) What's Changed * Backport: Fix for Digest MD5 bad challenges by @nobu in #160 PR for backport is #161

15.0.0 (2022-01-04) Added * [Ruby,JavaScript,Go] Add bigdecimal, biginteger parameter types (#42) * [.NET] Implementation of Cucumber Expressions by porting the Java parser (#1743) * [Python] Added Python Cucumber Expressions (#65) Changed * [Go] Parameters of type {float} are now parsed as float32 (previously it was float64). Use {double} if you need float64. (#42) 15.0.1 (2022-01-04) Fixed * Fixed release scripts 15.0.2 (2022-03-15) Fixed * Add missing name field in CommonJS package file (#87) 15.1.0 (2022-04-21) Added * [JavaScript] Add CucumberExpression.ast and expose the AST types. 15.1.1 (2022-04-21) Fixed * [JavaScript] Make CucumberExpression.ast public (it was accidentally private in 15.1.0) 15.2.0 (2022-05-24) Added * [JavaScript] Add ParameterInfo (#124) Fixed * [.NET] Fix casing in "word" parameter type constant 16.0.0 (2022-06-12) Changed * [JavaScript] The ParameterType constructor's regexps parameter has a new type: type Regexps = StringOrRegExp | readonly StringOrRegExp[]; type StringOrRegExp = string | RegExp. 16.0.1 (2022-11-06) Fixed * [JavaScript] The ParameterType constructor's transform, useForSnippets and preferForRegexpMatch should be optional. (#178) 16.1.0 - 2022-11-28 Added * [Java] Enabled reproducible builds * [JavaScript] Added ParameterType.builtin. This is to allow JSON serialization of only the non-builtin parameter types. 16.1.1 - 2022-12-08 Fixed * [Java] Improve expression creation performance (#187, #189) 16.1.2 (2023-01-17) Fixed * [Java] Improve cucumber expression creation performance (#202) 17.0.0 (2023-10-06) Changed * [JavaScript] Added TypeScript source to the package (#211) * [Ruby] Minimum supported ruby is now 2.5+ (#232) * [Ruby] Large suite wide refactor for basic rubocop compliance (#233 #235) * [Ruby] Expose ParameterType#transformer as a new public reader (#234) * [Ruby] Remove ParameterType#prefer_for_regexp_match? and ParameterType#use_for_snippets? -> Use their standard reader equivalents instead (Remove the ?) (#234) 17.0.1 (2023-11-24) Fixed * [JavaScript] Fix import paths lacking file suffix (#243) * [Ruby] Fixed up Layout rubocop autofixes

pkgsrc changes: - adapt to various upstream changes - update for newer version of pjproject - add unconditional depeendency on SDL - remove pktccops and mgcp option (has to do with supporting cable headends) - remove various 64-bit time_t fixes as upstream is finally doing these [asterisk-announce] asterisk release 18.21.0 The Asterisk Development Team would like to announce the release of asterisk-18.21.0. This release resolves issues reported by the community and would have not been possible without your participation. Thank You! Change Log for Release asterisk-18.21.0 ======================================== Summary: ---------------------------------------- - logger: Fix linking regression. - Revert "core & res_pjsip: Improve topology change handling." - menuselect: Use more specific error message. - res_pjsip_nat: Fix potential use of uninitialized transport details - app_if: Fix faulty EndIf branching. - manager.c: Fix regression due to using wrong free function. - config_options.c: Fix truncation of option descriptions. - manager.c: Improve clarity of "manager show connected". - make_xml_documentation: Really collect LOCAL_MOD_SUBDIRS documentation. - general: Fix broken links. - MergeApproved.yml: Remove unneeded concurrency - app_dial: Add option "j" to preserve initial stream topology of caller - ast_coredumper: Increase reliability - logger.c: Move LOG_GROUP documentation to dedicated XML file. - res_odbc.c: Allow concurrent access to request odbc connections - res_pjsip_header_funcs.c: Check URI parameter length before copying. - config.c: Log #exec include failures. - make_xml_documentation: Properly handle absolute LOCAL_MOD_SUBDIRS. - app_voicemail.c: Completely resequence mailbox folders. - sig_analog: Fix channel leak when mwimonitor is enabled. - res_rtp_asterisk.c: Update for OpenSSL 3+. - alembic: Update list of TLS methods available on ps_transports. - func_channel: Expose previously unsettable options. - app.c: Allow ampersands in playback lists to be escaped. - uri.c: Simplify ast_uri_make_host_with_port() - func_curl.c: Remove CURLOPT() plaintext documentation. - res_http_websocket.c: Set hostname on client for certificate validation. - live_ast: Add astcachedir to generated asterisk.conf. - SECURITY.md: Update with correct documentation URL - func_lock: Add missing see-also refs to documentation. - app_followme.c: Grab reference on nativeformats before using it - configs: Improve documentation for bandwidth in iax.conf. - logger: Add channel-based filtering. - chan_iax2.c: Don't send unsanitized data to the logger. - codec_ilbc: Disable system ilbc if version >= 3.0.0 - resource_channels.c: Explicit codec request when creating UnicastRTP. - doc: Update IP Quality of Service links. - chan_pjsip: Add PJSIPHangup dialplan app and manager action - chan_iax2.c: Ensure all IEs are displayed when dumping frame contents. - chan_dahdi: Warn if nonexistent cadence is requested. - stasis: Update the snapshot after setting the redirect - ari: Provide the caller ID RDNIS for the channels - main/utils: Implement ast_get_tid() for OpenBSD - res_rtp_asterisk.c: Fix runtime issue with LibreSSL - app_directory: Add ADSI support to Directory. - core_local: Fix local channel parsing with slashes. - Remove files that are no longer updated - app_voicemail: Add AMI event for mailbox PIN changes. - app_queue.c: Emit unpause reason with PauseQueueMember event. - bridge_simple: Suppress unchanged topology change requests - res_pjsip: Include cipher limit in config error message. - res_speech: allow speech to translate input channel - res_rtp_asterisk.c: Fix memory leak in ephemeral certificate creation. - res_pjsip_dtmf_info.c: Add 'INFO' to Allow header. - api.wiki.mustache: Fix indentation in generated markdown - pjsip_configuration.c: Disable DTLS renegotiation if WebRTC is enabled. - configs: Fix typo in pjsip.conf.sample. - res_pjsip_exten_state,res_pjsip_mwi: Allow unload on shutdown - res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters - .github: PRSubmitActions: Fix adding reviewers to PR - .github: New PR Submit workflows - .github: New PR Submit workflows - res_stasis: signal when new command is queued - ari/stasis: Indicate progress before playback on a bridge - func_curl.c: Ensure channel is locked when manipulating datastores. - .github: Fix job prereqs in PROpenedUpdated - .github: Block PR tests until approved - logger.h: Add ability to change the prefix on SCOPE_TRACE output - Add libjwt to third-party - res_pjsip: update qualify_timeout documentation with DNS note - chan_dahdi: Clarify scope of callgroup/pickupgroup. - func_json: Fix crashes for some types - res_speech_aeap: add aeap error handling - app_voicemail: Disable ADSI if unavailable. - codec_builtin: Use multiples of 20 for maximum_ms - lock.c: Separate DETECT_DEADLOCKS from DEBUG_THREADS - asterisk.c: Use the euid's home directory to read/write cli history - res_pjsip_transport_websocket: Prevent transport from being destroyed before message finishes. - cel: add publish user event helper - chan_console: Fix deadlock caused by unclean thread exit. - file.c: Add ability to search custom dir for sounds - chan_iax2: Improve authentication debugging. - res_rtp_asterisk: fix wrong counter management in ioqueue objects - make_buildopts_h, et. al. Allow adding all cflags to buildopts.h - func_periodic_hook: Add hangup step to avoid timeout - res_stasis_recording.c: Save recording state when unmuted. - res_speech_aeap: check for null format on response - func_periodic_hook: Don't truncate channel name - safe_asterisk: Change directory permissions to 755 - chan_rtp: Implement RTP glue for UnicastRTP channels - app_queue: periodic announcement configurable start time. - variables: Add additional variable dialplan functions. - Restore CHANGES and UPGRADE.txt to allow cherry-picks to work User Notes: ---------------------------------------- - ### app_dial: Add option "j" to preserve initial stream topology of caller The option "j" is now available for the Dial application which uses the initial stream topology of the caller to create the outgoing channels. - ### logger: Add channel-based filtering. The console log can now be filtered by channels or groups of channels, using the logger filter CLI commands. - ### chan_pjsip: Add PJSIPHangup dialplan app and manager action A new dialplan app PJSIPHangup and AMI action allows you to hang up an unanswered incoming PJSIP call with a specific SIP response code in the 400 -> 699 range. - ### app_voicemail: Add AMI event for mailbox PIN changes. The VoicemailPasswordChange event is now emitted whenever a mailbox password is updated, containing the mailbox information and the new password. Resolves: #398 - ### res_speech: allow speech to translate input channel res_speech now supports translation of an input channel to a format supported by the speech provider, provided a translation path is available between the source format and provider capabilites. - ### res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters With this update, the PJSIP realm lengths have been extended to support up to 255 characters. - ### res_stasis: signal when new command is queued Call setup times should be significantly improved when using ARI. - ### lock.c: Separate DETECT_DEADLOCKS from DEBUG_THREADS You no longer need to select DEBUG_THREADS to use DETECT_DEADLOCKS. This removes a significant amount of overhead if you just want to detect possible deadlocks vs needing full lock tracing. - ### file.c: Add ability to search custom dir for sounds A new option "sounds_search_custom_dir" has been added to asterisk.conf that allows asterisk to search AST_DATA_DIR/sounds/custom for sounds files before searching the standard AST_DATA_DIR/sounds/<lang> directory. - ### make_buildopts_h, et. al. Allow adding all cflags to buildopts.h The "Build Options" entry in the "core show settings" CLI command has been renamed to "ABI related Build Options" and a new entry named "All Build Options" has been added that shows both breaking and non-breaking options. - ### chan_rtp: Implement RTP glue for UnicastRTP channels The dial string option 'g' was added to the UnicastRTP channel which enables RTP glue and therefore native RTP bridges with those channels. - ### app_queue: periodic announcement configurable start time. Introduce a new queue configuration option called 'periodic-announce-startdelay' which will vary the normal (historic) behavior of starting the periodic announcement cycle at periodic-announce-frequency seconds after entering the queue to start the periodic announcement cycle at period-announce-startdelay seconds after joining the queue. The default behavior if this config option is not set remains unchanged. Signed-off-by: Jaco Kroon <jaco at uls.co.za> - ### variables: Add additional variable dialplan functions. Four new dialplan functions have been added. GLOBAL_DELETE and DELETE have been added which allows the deletion of global and channel variables. GLOBAL_EXISTS and VARIABLE_EXISTS have been added which checks whether a global or channel variable has been set. Upgrade Notes: ---------------------------------------- - ### app.c: Allow ampersands in playback lists to be escaped. Ampersands in URLs passed to the `Playback()`, `Background()`, `SpeechBackground()`, `Read()`, `Authenticate()`, or `Queue()` applications as filename arguments can now be escaped by single quoting the filename. Additionally, this is also possible when using the `CONFBRIDGE` dialplan function, or configuring various features in `confbridge.conf` and `queues.conf`. - ### pjsip_configuration.c: Disable DTLS renegotiation if WebRTC is enabled. The dtls_rekey will be disabled if webrtc support is requested on an endpoint. A warning will also be emitted. - ### res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters As part of this update, the maximum allowable length for PJSIP endpoints and relevant resources has been increased from 40 to 255 characters. To take advantage of this enhancement, it is recommended to run the necessary procedures (e.g., Alembic) to update your schemas. [asterisk-announce] asterisk release 18.20.2 The Asterisk Development Team would like to announce the release of asterisk-18.20.2. This release resolves issues reported by the community and would have not been possible without your participation. Thank You! Change Log for Release asterisk-18.20.2 ======================================== Summary: ---------------------------------------- - res_rtp_asterisk: Fix regression issues with DTLS client check [asterisk-announce] asterisk release 18.20.1 The Asterisk Development Team would like to announce security release Asterisk 18.20.1. The following security advisories were resolved in this release: - [Path traversal via AMI GetConfig allows access to outside files](https://github.com/asterisk/asterisk/s ecurity/advisories/GHSA-8857-hfmw-vg8f) - [Asterisk susceptible to Denial of Service via DTLS Hello packets during call initiation](https://github .com/asterisk/asterisk/security/advisories/GHSA-hxj9-xwr8-w8pq) - [PJSIP logging allows attacker to inject fake Asterisk log entries ](https://github.com/asterisk/asteris k/security/advisories/GHSA-5743-x3p5-3rg7) - [PJSIP_HEADER dialplan function can overwrite memory/cause crash when using 'update'](https://github.com /asterisk/asterisk/security/advisories/GHSA-98rc-4j27-74hh) Change Log for Release asterisk-18.20.1 ======================================== Summary: ---------------------------------------- - res_pjsip_header_funcs: Duplicate new header value, don't copy. - res_pjsip: disable raw bad packet logging - res_rtp_asterisk.c: Check DTLS packets against ICE candidate list - manager.c: Prevent path traversal with GetConfig. [asterisk-announce] asterisk release 18.20.0 The Asterisk Development Team would like to announce the release of asterisk-18.20.0. This release resolves issues reported by the community and would have not been possible without your participation. Thank You! Change Log for Release asterisk-18.20.0 ======================================== Summary: ---------------------------------------- - ari-stubs: Fix more local anchor references - ari-stubs: Fix more local anchor references - ari-stubs: Fix broken documentation anchors - res_pjsip_session: Send Session Interval too small response - .github: Update workflow-application-token-action to v2 - app_dial: Fix infinite loop when sending digits. - app_voicemail: Fix for loop declarations - alembic: Fix quoting of the 100rel column - pbx.c: Fix gcc 12 compiler warning. - app_audiosocket: Fixed timeout with -1 to avoid busy loop. - download_externals: Fix a few version related issues - main/refer.c: Fix double free in refer_data_destructor + potential leak - sig_analog: Add Called Subscriber Held capability. - app_macro: Fix locking around datastore access - Revert "app_stack: Print proper exit location for PBXless channels." - .github: Use generic releaser - install_prereq: Fix dependency install on aarch64. - res_pjsip.c: Set contact_user on incoming call local Contact header - extconfig: Allow explicit DB result set ordering to be disabled. - rest-api: Run make ari-stubs - res_pjsip_header_funcs: Make prefix argument optional. - pjproject_bundled: Increase PJSIP_MAX_MODULE to 38 - manager: Tolerate stasis messages with no channel snapshot. - core/ari/pjsip: Add refer mechanism - chan_dahdi: Allow autoreoriginating after hangup. - audiohook: Unlock channel in mute if no audiohooks present. - sig_analog: Allow three-way flash to time out to silence. - res_prometheus: Do not generate broken metrics - res_pjsip: Enable TLS v1.3 if present. - func_cut: Add example to documentation. - extensions.conf.sample: Remove reference to missing context. - func_export: Use correct function argument as variable name. - app_queue: Add support for applying caller priority change immediately. - .github: Fix cherry-pick reminder issues - chan_iax2.c: Avoid crash with IAX2 switch support. - res_geolocation: Ensure required 'location_info' is present. - Adds manager actions to allow move/remove/forward individual messages in a particular mailbox folder. The forward command can be used to copy a message within a mailbox or to another mailbox. Also adds a VoicemailBoxSummarry, required to retrieve message ID's. - app_voicemail: add CLI commands for message manipulation - res_rtp_asterisk: Move ast_rtp_rtcp_report_alloc using `rtp->themssrc_valid` into the scope of the rtp_i nstance lock. - .github: Minor tweak to Asterisk Releaser - .github: Suppress cherry-pick reminder for some situations - sig_analog: Allow immediate fake ring to be suppressed. User Notes: ---------------------------------------- - ### sig_analog: Add Called Subscriber Held capability. Called Subscriber Held is now supported for analog FXS channels, using the calledsubscriberheld option. This allows a station user to go on hook when receiving an incoming call and resume from another phone on the same line by going on hook, without disconnecting the call. - ### res_pjsip_header_funcs: Make prefix argument optional. The prefix argument to PJSIP_HEADERS is now optional. If not specified, all header names will be returned. - ### core/ari/pjsip: Add refer mechanism There is a new ARI endpoint `/endpoints/refer` for referring an endpoint to some URI or endpoint. - ### chan_dahdi: Allow autoreoriginating after hangup. The autoreoriginate setting now allows for kewlstart FXS channels to automatically reoriginate and provide dial tone to the user again after all calls on the line have cleared. This saves users from having to manually hang up and pick up the receiver again before making another call. - ### sig_analog: Allow three-way flash to time out to silence. The threewaysilenthold option now allows the three-way dial tone to time out to silence, rather than continuing forever. - ### res_pjsip: Enable TLS v1.3 if present. res_pjsip now allows TLS v1.3 to be enabled if supported by the underlying PJSIP library. The bundled version of PJSIP supports TLS v1.3. - ### app_queue: Add support for applying caller priority change immediately. The 'queue priority caller' CLI command and 'QueueChangePriorityCaller' AMI action now have an 'immediate' argument which allows the caller priority change to be reflected immediately, causing the position of a caller to move within the queue depending on the priorities of the other callers. - ### Adds manager actions to allow move/remove/forward individual messages in a particular mailbox folder. The forward command can be used to copy a message within a mailbox or to another mailbox. Also adds a Vo icemailBoxSummarry, required to retrieve message ID's. The following manager actions have been added VoicemailBoxSummary - Generate message list for a given mailbox VoicemailRemove - Remove a message from a mailbox folder VoicemailMove - Move a message from one folder to another within a mailbox VoicemailForward - Copy a message from one folder in one mailbox to another folder in another or the same mailbox. - ### app_voicemail: add CLI commands for message manipulation The following CLI commands have been added to app_voicemail voicemail show mailbox <mailbox> <context> Show contents of mailbox <mailbox>@<context> voicemail remove <mailbox> <context> <from_folder> <messageid> Remove message <messageid> from <from_folder> in mailbox <mailbox>@<context> voicemail move <mailbox> <context> <from_folder> <messageid> <to_folder> Move message <messageid> in mailbox <mailbox>&<context> from <from_folder> to <to_folder> voicemail forward <from_mailbox> <from_context> <from_folder> <messageid> <to_mailbox> <to_context> <to_ folder> Forward message <messageid> in mailbox <mailbox>@<context> <from_folder> to mailbox <mailbox>@<context> <to_folder> - ### sig_analog: Allow immediate fake ring to be suppressed. The immediatering option can now be set to no to suppress the fake audible ringback provided when immediate=yes on FXS channels. [asterisk-announce] Asterisk Release 18.19.0 The Asterisk Development Team would like to announce the release of Asterisk 18.19.0. This release resolves issues reported by the community and would have not been possible without your participation. Thank You! Change Log for Release 18.19.0 ======================================== Summary: ---------------------------------------- - app.h: Move declaration of ast_getdata_result before its first use - doc: Remove obsolete CHANGES-staging and UPGRADE-staging - .github: Updates for AsteriskReleaser - app_voicemail: fix imap compilation errors - res_musiconhold: avoid moh state access on unlocked chan - utils: add lock timestamps for DEBUG_THREADS - .github: Back out triggering PROpenedOrUpdated by label - .github: Move publish docs to new file CreateDocs.yml - rest-api: Updates for new documentation site - .github: Remove result check from PROpenUpdateGateTests - .github: Fix use of 'contains' - .github: Add recheck label test to additional jobs - .github: Fix recheck label typos - .github: Fix recheck label manipulation - .github: Allow PR submit checks to be re-run by label - app_voicemail_imap: Fix message count when IMAP server is unavailable - res_pjsip_rfc3326: Prefer Q.850 cause code over SIP. - res_pjsip_session: Added new function calls to avoid ABI issues. - app_queue: Add force_longest_waiting_caller option. - pjsip_transport_events.c: Use %zu printf specifier for size_t. - res_crypto.c: Gracefully handle potential key filename truncation. - configure: Remove obsolete and deprecated constructs. - res_fax_spandsp.c: Clean up a spaces/tabs issue - ast-db-manage: Synchronize revisions between comments and code. - test_statis_endpoints: Fix channel_messages test again - res_crypto.c: Avoid using the non-portable ALLPERMS macro. - tcptls: when disabling a server port, we should set the accept_fd to -1. - AMI: Add parking position parameter to Park action - test_stasis_endpoints.c: Make channel_messages more stable - build: Fix a few gcc 13 issues - .github: Rework for merge approval - ast-db-manage: Fix alembic branching error caused by #122. - app_followme: fix issue with enable_callee_prompt=no (#88) - sounds: Update download URL to use HTTPS. - configure: Makefile downloader enable follow redirects. - res_musiconhold: Add option to loop last file. - chan_dahdi: Fix Caller ID presentation for FXO ports. - AMI: Add CoreShowChannelMap action. - sig_analog: Add fuller Caller ID support. - res_stasis.c: Add new type 'sdp_label' for bridge creation. - app_queue: Preserve reason for realtime queues - .github: Fix issues with cherry-pick-reminder - indications: logging changes - .github Ignore error when adding reviewrs to PR - .github: Update field descriptions for AsteriskReleaser - callerid: Allow specifying timezone for date/time. - chan_pjsip: Allow topology/session refreshes in early media state - chan_dahdi: Fix broken hidecallerid setting. - .github: Change title of AsteriskReleaser job - asterisk.c: Fix option warning for remote console. - .github: Don't add cherry-pick reminder if it's already present - .github: Fix quoting in PROpenedOrUpdated - .github: Add cherry-pick reminder to new PRs - configure: fix test code to match gethostbyname_r prototype. - res_pjsip_pubsub.c: Use pjsip version for pending NOTIFY check. (#76) - res_sorcery_memory_cache.c: Fix memory leak - xml.c: Process XML Inclusions recursively. - .github: Tweak improvement issue type language. - .github: Tweak new feature language, and move feature requests elsewhere. - .github: Fix staleness check to only run on certain labels. User Notes: ---------------------------------------- - ### AMI: Add parking position parameter to Park action New ParkingSpace parameter has been added to AMI action Park. - ### res_musiconhold: Add option to loop last file. The loop_last option in musiconhold.conf now allows the last file in the directory to be looped once reached. - ### AMI: Add CoreShowChannelMap action. New AMI action CoreShowChannelMap has been added. - ### sig_analog: Add fuller Caller ID support. Additional Caller ID properties are now supported on incoming calls to FXS stations, namely the redirecting reason and call qualifier. - ### res_stasis.c: Add new type 'sdp_label' for bridge creation. When creating a bridge using the ARI the 'type' argument now accepts a new value 'sdp_label' which will configure the bridge to add labels for each stream in the SDP with the corresponding channel id. - ### app_queue: Preserve reason for realtime queues Make paused reason in realtime queues persist an Asterisk restart. This was fixed for non-realtime queues in ASTERISK_25732. Upgrade Notes: ---------------------------------------- - ### app_queue: Preserve reason for realtime queues Add a new column to the queue_member table: reason_paused VARCHAR(80) so the reason can be preserved. Closed Issues: ---------------------------------------- - #45: [bug]: Non-bundled PJSIP check for evsub pending NOTIFY check is insufficient/ineffective - #55: [bug]: res_sorcery_memory_cache: Memory leak when calling sorcery_memory_cache_open - #64: [bug]: app_voicemail_imap wrong behavior when losing IMAP connection - #65: [bug]: heap overflow by default at startup - #66: [improvement]: Fix preserve reason of pause when Asterisk is restared for realtime queues - #73: [new-feature]: pjsip: Allow topology/session refreshes in early media state - #87: [bug]: app_followme: Setting enable_callee_prompt=no breaks timeout - #89: [improvement]: indications: logging changes - #91: [improvement]: Add parameter on ARI bridge create to allow it to send SDP labels - #94: [new-feature]: sig_analog: Add full Caller ID support for incoming calls - #98: [new-feature]: callerid: Allow timezone to be specified at runtime - #100: [bug]: sig_analog: hidecallerid setting is broken - #102: [bug]: Strange warning - 'T' option is not compatible with remote console mode and has no effect . - #104: [improvement]: Add AMI action to get a list of connected channels - #108: [new-feature]: fair handling of calls in multi-queue scenarios - #110: [improvement]: utils - add lock timing information with DEBUG_THREADS - #116: [bug]: SIP Reason: "Call completed elsewhere" no longer propagating - #120: [bug]: chan_dahdi: Fix broken presentation for FXO caller ID - #122: [new-feature]: res_musiconhold: Add looplast option - #133: [bug]: unlock channel after moh state access - #136: [bug]: Makefile downloader does not follow redirects. - #145: [bug]: ABI issue with pjproject and pjsip_inv_session - #155: [bug]: GCC 13 is catching a few new trivial issues - #158: [bug]: test_stasis_endpoints.c: Unit test channel_messages is unstable - #174: [bug]: app_voicemail imap compile errors - #200: [bug]: Regression: In app.h an enum is used before its declaration. [asterisk-announce] Asterisk Release 18.18.1 The Asterisk Development Team would like to announce security release Asterisk 18.18.1. The following security advisories were resolved in this release: https://github.com/asterisk/asterisk/security/advisories/GHSA-4xjp-22g4-9fxm Change Log for Release 18.18.1 ======================================== Summary: ---------------------------------------- - apply_patches: Use globbing instead of file/sort. - apply_patches: Sort patch list before applying - pjsip: Upgrade bundled version to pjproject 2.13.1 User Notes: ---------------------------------------- - ### res_http_media_cache: Introduce options and customize The res_http_media_cache module now attempts to load configuration from the res_http_media_cache.conf file. The following options were added: * timeout_secs * user_agent * follow_location * max_redirects * protocols * redirect_protocols * dns_cache_timeout_secs - ### format_sln: add .slin as supported file extension format_sln now recognizes '.slin' as a valid file extension in addition to the existing '.sln' and '.raw'. - ### bridge_builtin_features: add beep via touch variable Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval) Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid interval in seconds will result in a periodic beep being played to the monitored channel upon MixMontior/Monitor feature start. If an interval less than 5 seconds is specified, the interval will default to 5 seconds. If the value is set to an invalid interval, the default of 15 seconds will be used. - ### app_senddtmf: Add SendFlash AMI action. The SendFlash AMI action now allows sending a hook flash event on a channel. - ### res_mixmonitor: MixMonitorMute by MixMonitor ID It is now possible to specify the MixMonitorID when calling the manager action: MixMonitorMute. This will allow an individual MixMonitor instance to be muted via ID. The MixMonitorID can be stored as a channel variable using the 'i' MixMonitor option and is returned upon creation if this option is used. As part of this change, if no MixMonitorID is specified in the manager action MixMonitorMute, Asterisk will set the mute flag on all MixMonitor audiohooks on the channel. Previous behavior would set the flag on the first MixMonitor audiohook found. - ### pbx_dundi: Add PJSIP support. DUNDi now supports chan_pjsip. Outgoing calls using PJSIP require the pjsip_outgoing_endpoint option to be set in dundi.conf. - ### test.c: Fix counting of tests and add 2 new tests The "tests" attribute of the "testsuite" element in the output XML now reflects only the tests actually requested to be executed instead of all the tests registered. The "failures" attribute was added to the "testsuite" element. Also added two new unit tests that just pass and fail to be used for testing CI itself. - ### cli: increase channel column width This change increases the display width on 'core show channels' amd 'core show channels verbose' For 'core show channels', the Channel name field is increased to 64 characters and the Location name field is increased to 32 characters. For 'core show channels verbose', the Channel name field is increased to 80 characters, the Context is increased to 24 characters and the Extension is increased to 24 characters. Upgrade Notes: ---------------------------------------- Closed Issues: ---------------------------------------- - #193: [bug]: third-party/apply-patches doesn't sort the patch file list before applying [asterisk-announce] Asterisk Release 18.18.0 The Asterisk Development Team would like to announce the release of Asterisk 18.18.0. This release resolves issues reported by the community and would have not been possible without your participation. Thank You! Change Log for Release 18.18.0 ======================================== Summary: ---------------------------------------- - Set up new ChangeLogs directory - .github: Add AsteriskReleaser - chan_pjsip: also return all codecs on empty re-INVITE for late offers - cel: add local optimization begin event - core: Cleanup gerrit and JIRA references. (#40) - .github: Fix CherryPickTest to only run when it should - .github: Fix reference to CHERRY_PICK_TESTING_IN_PROGRESS - .github: Remove separate set labels step from new PR - .github: Refactor CP progress and add new PR test progress - res_pjsip: mediasec: Add Security-Client headers after 401 - .github: Add cherry-pick test progress labels - LICENSE: Update link to trademark policy. - chan_dahdi: Add dialmode option for FXS lines. (#36) - .github: Update issue templates - .github: Remove unnecessary parameter in CherryPickTest - Initial GitHub PRs - Initial GitHub Issue Templates - pbx_dundi: Fix PJSIP endpoint configuration check. - Revert "app_queue: periodic announcement configurable start time." - pbx_dundi: Add PJSIP support. - res_pjsip_stir_shaken: Fix JSON field ordering and disallowed TN characters. - install_prereq: Add Linux Mint support. - chan_pjsip: fix music on hold continues after INVITE with replaces - voicemail.conf: Fix incorrect comment about #include. - app_queue: Fix minor xmldoc duplication and vagueness. - test.c: Fix counting of tests and add 2 new tests - loader.c: Minor module key check simplification. - ael: Regenerate lexers and parsers. - res_calendar: output busy state as part of show calendar. - bridge_builtin_features: add beep via touch variable - res_mixmonitor: MixMonitorMute by MixMonitor ID - format_sln: add .slin as supported file extension - app_queue: periodic announcement configurable start time. - func_json: Fix JSON parsing issues. - app_dial: Fix DTMF not relayed to caller on unanswered calls. - make_version: Strip svn stuff and suppress ref HEAD errors - configure: fix detection of re-entrant resolver functions - cli: increase channel column width - res_agi: RECORD FILE plays 2 beeps. - app_senddtmf: Add SendFlash AMI action. - contrib: rc.archlinux.asterisk uses invalid redirect. - main/iostream.c: fix build with libressl - res_http_media_cache: Introduce options and customize User Notes: ---------------------------------------- - ### cel: add local optimization begin event The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used by itself or in conert with the existing AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion. - ### chan_dahdi: Add dialmode option for FXS lines. (#36) A "dialmode" option has been added which allows specifying, on a per-channel basis, what methods of subscriber dialing (pulse and/or tone) are permitted. Additionally, this can be changed on a channel at any point during a call using the CHANNEL function. - ### pbx_dundi: Add PJSIP support. DUNDi now supports chan_pjsip. Outgoing calls using PJSIP require the pjsip_outgoing_endpoint option to be set in dundi.conf. - ### cli: increase channel column width This change increases the display width on 'core show channels' amd 'core show channels verbose' For 'core show channels', the Channel name field is increased to 64 characters and the Location name field is increased to 32 characters. For 'core show channels verbose', the Channel name field is increased to 80 characters, the Context is increased to 24 characters and the Extension is increased to 24 characters. - ### app_senddtmf: Add SendFlash AMI action. The SendFlash AMI action now allows sending a hook flash event on a channel. - ### res_http_media_cache: Introduce options and customize The res_http_media_cache module now attempts to load configuration from the res_http_media_cache.conf file. The following options were added: * timeout_secs * user_agent * follow_location * max_redirects * protocols * redirect_protocols * dns_cache_timeout_secs - ### test.c: Fix counting of tests and add 2 new tests The "tests" attribute of the "testsuite" element in the output XML now reflects only the tests actually requested to be executed instead of all the tests registered. The "failures" attribute was added to the "testsuite" element. Also added two new unit tests that just pass and fail to be used for testing CI itself. - ### res_mixmonitor: MixMonitorMute by MixMonitor ID It is now possible to specify the MixMonitorID when calling the manager action: MixMonitorMute. This will allow an individual MixMonitor instance to be muted via ID. The MixMonitorID can be stored as a channel variable using the 'i' MixMonitor option and is returned upon creation if this option is used. As part of this change, if no MixMonitorID is specified in the manager action MixMonitorMute, Asterisk will set the mute flag on all MixMonitor audiohooks on the channel. Previous behavior would set the flag on the first MixMonitor audiohook found. - ### bridge_builtin_features: add beep via touch variable Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval) Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid interval in seconds will result in a periodic beep being played to the monitored channel upon MixMontior/Monitor feature start. If an interval less than 5 seconds is specified, the interval will default to 5 seconds. If the value is set to an invalid interval, the default of 15 seconds will be used. - ### format_sln: add .slin as supported file extension format_sln now recognizes '.slin' as a valid file extension in addition to the existing '.sln' and '.raw'. Upgrade Notes: ---------------------------------------- - ### cel: add local optimization begin event The existing AST_CEL_LOCAL_OPTIMIZE can continue to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event can be ignored if desired. Closed Issues: ---------------------------------------- - #35: [New Feature]: chan_dahdi: Allow disabling pulse or tone dialing - #39: [Bug]: Remove .gitreview from repository. - #43: [Bug]: Link to trademark policy is no longer correct - #48: [bug]: res_pjsip: Mediasec requires different headers on 401 response - #52: [improvement]: Add local optimization begin cel event ### For more details, see: https://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-18.18.0.md [asterisk-announce] Asterisk 18.17.1 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.17.1. The release of Asterisk 18.17.1 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: Bugs fixed in this release: ----------------------------------- * ASTERISK-30469 - res_pjsip_pubsub: Regression for subscription shutdowns (Reported by N A) * ASTERISK-30472 - pbx_ael: Literal usage for variables broken (Reported by isrl) For a full list of changes in this release, please see the ChangeLog: https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-18.17.1 Thank you for your continued support of Asterisk! [asterisk-announce] Asterisk 18.17.0 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.17.0. The release of Asterisk 18.17.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: New Features made in this release: ----------------------------------- * ASTERISK-29810 - app_signal: Add channel signaling applications (Reported by N A) * ASTERISK-30262 - res_pjsip_session: Allow a context to be specified for overlap dialing (Reported by N A) * ASTERISK-30319 - Add BYE Reason support for SIP (Reported by Igor Goncharovsky) * ASTERISK-30180 - app_broadcast: Add a channel audio multicasting application (Reported by N A) Bugs fixed in this release: ----------------------------------- * ASTERISK-27830 - Asterisk crashes on Invalid UTF-8 string (Reported by AvayaXAsterisk) * ASTERISK-30354 - chan_iax2: Lack of formats prior to receiving voice frames causes jitterbuffer to stall (Reported by N A) * ASTERISK-30162 - when chan_iax is used to relay calls, no ringing indication is played (Reported by Jaco Kroon) * ASTERISK-30424 - pjproject_bundled: cross-compilation broken when ssl autodetected (Reported by Nick French) * ASTERISK-30388 - res_phoneprov: Stale SERVER variable when multi-homed (Reported by cmaj) * ASTERISK-30419 - pjsip: Crash when sending NOTIFY in PJSIP 2.13 (Reported by Ross Beer) * ASTERISK-30417 - Copy/Paste error in UnpauseQueueMember (Reported by Sean Bright) * ASTERISK-30406 - pbx_ael: Global variables are not expanded. (Reported by Sean Bright) * ASTERISK-29604 - ari: Segfault with lots of calls (Reported by Danila Evgrafov) * ASTERISK-30391 - res_rtp_asterisk: Issue with transcoding g722 after MES changes (Reported by George Joseph) * ASTERISK-30345 - loader.c: Modules that decline to load cannot be reloaded (Reported by N A) * ASTERISK-30379 - http: fix NULL pointer dereference while enable_status on TLS-only (Reported by Boris P. Korzun) * ASTERISK-30375 - res_http_media_cache: Crash when URL has no path component. (Reported by Sean Bright) * ASTERISK-30351 - manager: Originate variables are not added when setvar used in manager.conf (Reported by Sebastian Gutierrez) * ASTERISK-30369 - res_pjsip: Websockets from same IP shut down when they shouldn't be (Reported by Joshua C. Colp) * ASTERISK-30367 - pbx: Fix outdated channel snapshots with pbx_exec (Reported by N A) * ASTERISK-28767 - chan_pjsip: Caller ID not used when checking for extension, callerid supplement executed too late (Reported by Oleg) * ASTERISK-30350 - res_pjsip_sdp_rtp: rtp_timeout_hold is not used when moh_passthrough has call on hold (Reported by Benjamin Keith Ford) * ASTERISK-30240 - app voicemail odbc build error with gcc 11.1 (Reported by Michael Bradeen) * ASTERISK-30100 - res_pjsip: Path is ignored on INVITE to endpoint (Reported by Yury Kirsanov) * ASTERISK-30198 - Error `Too many open files` occurs after about ~8000 calls when using mixmonitor (Reported by Julien Alie) Improvements made in this release: ----------------------------------- * ASTERISK-30411 - app_read: add option to include terminating digit on empty, terminated strings (Reported by Michael Bradeen) * ASTERISK-30405 - app_directory: Add 's' option to skip channel call (Reported by Michael Bradeen) * ASTERISK-30422 - app_senddtmf: add the option for senddtmf to answer (Reported by Michael Bradeen) * ASTERISK-30325 - Upgrade Asterisk to bundled pjproject 2.13 (Reported by Stanislav Abramenkov) * ASTERISK-30404 - app_directory: Add reading directory configuration from custom file (Reported by Michael Bradeen) * ASTERISK-29913 - func_json: Adds multi-level and array parsing to JSON_DECODE (Reported by N A) * ASTERISK-30353 - func_frame_trace: Print text for text frames (Reported by N A) * ASTERISK-30361 - json.h: Add missing ast_json_object_real_get (Reported by N A) * ASTERISK-30280 - Create capability to assign a Media Experience Score to RTP streams (Reported by George Joseph) * ASTERISK-30332 - func_callerid: Warn if invalid redirecting reason provided (Reported by N A) For a full list of changes in this release, please see the ChangeLog: https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-18.17.0 Thank you for your continued support of Asterisk! [asterisk-announce] Asterisk 16.29.1, 18.15.1, 19.7.1, 20.0.1 Now Available The Asterisk Development Team would like to announce the release of Asterisk 16.29.1, 18.15.1, 19.7.1, and 20.0.1. The release of Asterisk 16.29.1, 18.15.1, 19.7.1, and 20.0.1 resolves issues reported by the community and would have not been possible without your participation.Thank you! The following issue is resolved in this release: Bugs fixed in this release: ----------------------- [ASTERISK-30103 <https://issues.asterisk.org/jira/browse/ASTERISK-30103>] chan_ooh323 vulnerability in calling/called party IE (Reported By: Michael Bradeen) [ASTERISK-30176 <https://issues.asterisk.org/jira/browse/ASTERISK-30176>] GetConfig can read files outside of Asterisk (Reported By: shawty) [ASTERISK-30244 <https://issues.asterisk.org/jira/browse/ASTERISK-30244>] Occasional crash when TCP/TLS connection terminated and subscription persistence is removed (Reported By: nappsoft) [ASTERISK-30338 <https://issues.asterisk.org/jira/browse/ASTERISK-30338>] Backport 2.13 security fixes from pjproject [asterisk-announce] Asterisk 18.15.0 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.15.0. The release of Asterisk 18.15.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: New Features made in this release: ----------------------------------- * ASTERISK-30037 - Add test support to calling external processes (Reported by Philip Prindeville) * ASTERISK-30161 - locks: add AMI event for deadlock (Reported by N A) * ASTERISK-30211 - app_confbridge: Add end_marked_any option (Reported by N A) * ASTERISK-30186 - res_pjsip: Add support for reloading TLS certificate and key information (Reported by Joshua C. Colp) * ASTERISK-29899 - features: Add advanced transfer initiation options (Reported by N A) Bugs fixed in this release: ----------------------------------- * ASTERISK-30235 - res_crypto and tests: Memory issues and and uninitialized variable error (Reported by George Joseph) * ASTERISK-30234 - res_geolocation: ...may be used uninitialized error in geoloc_config.c (Reported by George Joseph) * ASTERISK-30215 - Inbound SIP INVITE with Geo Location causing a Segmentation Fault (Reported by Dan Cropp) * ASTERISK-30135 - [res_musiconhold] Allows the moh only for the answered call (Reported by sungtae kim) * ASTERISK-26894 - pjsip should support tel uri scheme (Reported by Gergely D½½ms½½di) * ASTERISK-30210 - func_frame_trace: Channel masquerade triggers assertion (Reported by N A) * ASTERISK-30190 - res_geolocation: GEOLOC_PROFILE isn't returning correct values on incoming channel (Reported by George Joseph) * ASTERISK-29185 - chan_pjsip: Endpoint: allow = all is broken. (Reported by Alexander Traud) * ASTERISK-30192 - res_tonedetect: fix typo for frametype (Reported by N A) * ASTERISK-29453 - alembic: incoming_call_offer_pref and outgoing_call_offer_pref missing in "ps_endpoints" table (Reported by Daniel Th½½men) * ASTERISK-26826 - testsuite: Add support for Python 3 (Reported by Joshua C. Colp) * ASTERISK-30167 - res_geolocation: Refactor for issues found by users (Reported by George Joseph) * ASTERISK-28422 - Memory Leak in Confbridge menu (Reported by Ted G) * ASTERISK-29917 - ami: FilterList action doesn't exist (Reported by N A) * ASTERISK-30018 - app_meetme: MeetmeList AMI event not documented (Reported by Michael Cargile) * ASTERISK-30020 - ConfbridgeListRooms Event Not Documented (Reported by Michael Cargile) * ASTERISK-30151 - Documentation doesn't include info about "field", a 3rd required parameter. (Reported by Chris Young) Improvements made in this release: ----------------------------------- * ASTERISK-30241 - res_pjsip_gelocation: Downgrade some NOTICE scope trace debugs to DEBUG level (Reported by N A) * ASTERISK-30178 - extend user_eq_phone behavior to local uri's (Reported by Michael Bradeen) * ASTERISK-30046 - Reimplement res/res_crypto.c internals with EVP_PKEY interface to Openssl API's (Reported by Philip Prindeville) * ASTERISK-30045 - Add test coverage to res/res_crypto.c functionality (Reported by Philip Prindeville) * ASTERISK-30185 - res_geolocation: Allow location parameters to be specified in profiles (Reported by George Joseph) * ASTERISK-30177 - res_geolocation: Add option to suppress empty elements (Reported by George Joseph) * ASTERISK-30182 - res_geolocation: Add built-in profiles to use in fully dynamic configurations (Reported by George Joseph) * ASTERISK-29906 - [patch] update RLS to reflect the changes to the lists (Reported by Alexei Gradinari) * ASTERISK-30163 - general: fix minor formatting issues (Reported by N A) * ASTERISK-30164 - chan_iax2: Add missing option documentation (Reported by N A) * ASTERISK-30153 - logger: Improve log levels (Reported by N A) * ASTERISK-30160 - cdr.conf: Remove obsolete app_mysql reference (Reported by N A) * ASTERISK-30159 - general: Remove obsolete SVN references (Reported by N A) [asterisk-announce] Asterisk 18.14.0 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.14.0. The release of Asterisk 18.14.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: Improvements made in this release: ----------------------------------- * ASTERISK-30128 - Create PJSIP interface module for Geolocation (Reported by George Joseph) * ASTERISK-30127 - Create core Geolocation capability for Asterisk (Reported by George Joseph) * ASTERISK-30089 - general: fix typos (Reported by N A) * ASTERISK-30050 - Upgrade Asterisk to bundled pjproject 2.12.1 (Reported by Stanislav Abramenkov) Bugs fixed in this release: ----------------------------------- * ASTERISK-30167 - res_geolocation: Refactor for issues found by users (Reported by George Joseph) * ASTERISK-29966 - pbx_variables: ast_str_strlen can be wrong (Reported by N A) * ASTERISK-29905 - OSX: bininstall launchd issue on cross-platfrom build (Reported by Sergey V. Lobanov) * ASTERISK-30137 - manager: Global disabled event filtered is incomplete (Reported by N A) * ASTERISK-30109 - res_pjsip: no contact-status AMI event on register of prune-on-boot contact that uses the same URI as before Asterisk restart (Reported by Michael Neuhauser) * ASTERISK-29991 - chan_dahdi, callerid: Caller ID does not honor presentation (Reported by N A) * ASTERISK-30126 - Spelling mistake in configs/samples/queues.conf.sample (Reported by Sam Banks) * ASTERISK-30029 - build: Git security vulnerability fix is sad with our accessing git as root during "make install" (Reported by Joshua C. Colp) * ASTERISK-29907 - res_pjsip, app_confbridge: Video call through ConfBridge with normal endpoints causes infinite loop/crash (Reported by N A) * ASTERISK-30138 - Compile failure in res_geolocation/geoloc_eprofile.c when optimization is enabled (Reported by George Joseph) * ASTERISK-30096 - cel_odbc: Column type 9 (field 'cdr:cel:eventtime') is unsupported at this time (Reported by Morvai Szabolcs) * ASTERISK-30083 - chan_iax2: Optional dependency on openssl/res_crypto is now mandatory (Reported by Dmitry Melekhov) * ASTERISK-30099 - test_aeap_transport: transport_connect_fail sporadically causes failure (Reported by Kevin Harwell) * ASTERISK-30123 - features: Update automixmon documentation to reflect reality (Reported by Trevor Peirce) * ASTERISK-30117 - pbx_lua: Remove compiler warnings (Reported by Boris P. Korzun) * ASTERISK-30101 - res_prometheus: Optional load res_pjsip_outbound_registration.so (Reported by Boris P. Korzun) * ASTERISK-29989 - app_dial, chan_dahdi: DIALSTATUS is inconsistent for busy (Reported by N A) * ASTERISK-30001 - db: Removing nonexistent entries shows "Database entry removed" (Reported by N A) * ASTERISK-30115 - app_dial: Allow hook flashes to propogate on outbound dials (Reported by N A) * ASTERISK-30106 - res_calendar_icalendar: Microsoft online ICS calendars no longer work (Reported by N A) * ASTERISK-29822 - cli: Typing \? freezes the CLI permanently with remote console (Reported by N A) * ASTERISK-30072 - res_pjsip: allow TLS verification of wildcard cert-bearing servers (Reported by Kevin Harwell) * ASTERISK-30075 - say: Abort if channel hangs up during playback (Reported by N A) New Features made in this release: ----------------------------------- * ASTERISK-30136 - db: Add AMI action to retrieve all keys beginning with a prefix (Reported by N A) * ASTERISK-30000 - chan_dahdi: Add POLARITY function (Reported by N A) * ASTERISK-30062 - cli: Add CLI command to execute a dialplan app (Reported by N A) * ASTERISK-29999 - pjsip: Get information from 200 OK INVITE reply headers (Reported by Jos½½ Lopes) * ASTERISK-30061 - pbx: Add pbx helper application (Reported by N A) [asterisk-announce] Asterisk 18.13.0 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.13.0. The release of Asterisk 18.13.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: Improvements made in this release: ----------------------------------- * ASTERISK-29906 - [patch] update RLS to reflect the changes to the lists (Reported by Alexei Gradinari) * ASTERISK-29891 - [patch] provide a display name for RLS subscriptions (Reported by Alexei Gradinari) * ASTERISK-30090 - xmldocs: Use example tags for examples (Reported by N A) * ASTERISK-30086 - res_parking: Warn when invalid parking space requested (Reported by N A) * ASTERISK-30058 - Evaluate dialplan functions and variables in agi exec (Reported by Shloime Rosenblum) * ASTERISK-30027 - ari: expose channel driver's unique id (i.e. Call-ID for chan_sip/chan_pjsip) in ARI channel resource (Reported by Moritz Fain) * ASTERISK-29845 - res_pjsip_outbound_registration: Show time remaining until registration lapses (Reported by N A) Bugs fixed in this release: ----------------------------------- * ASTERISK-30097 - console: Recent documentation changes for connecting to remote console are inconsistent (Reported by Matthias Hensler) * ASTERISK-30043 - Wrong party is disconnected when hook-flashing on 3-way bridge (Reported by Josh Alberts) * ASTERISK-29603 - res_pjsip: UPDATE/re-INVITE not sent when "timers=always" is specified in pjsip.conf (Reported by Ray Crumrine) * ASTERISK-30092 - DateTime application: wrong inflection for one o'clock in German (Reported by Christof Efkemann) * ASTERISK-30064 - pbx: iax2 switch causes crash due to deadlock and assertion (Reported by N A) * ASTERISK-29981 - res_calendar: Asterisk crashes when starting, and will not run (Reported by N A) * ASTERISK-30039 - cli: Targeted debug on startup deadlocks and creates unstable system (Reported by N A) * ASTERISK-30051 - res_pjsip: No video after un-hold with moh_passthrough=yes (Reported by Maximilian Fridrich) * ASTERISK-24601 - [patch]Missing RFC4235 tags and attributes in PJSIP NOTIFY event: dialog XML body (Reported by Marco Paland) * ASTERISK-30059 - menuselect: libxml include fails under Gentoo (Reported by waltermoeller) * ASTERISK-30060 - loader: format warnings in dev mode (Reported by N A) * ASTERISK-30065 - pjsip: Open Websocket connection is not reused for outgoing requests (Reported by LA) * ASTERISK-30042 - res_pjsip_transport_websocket: Registration over websocket returns a rewritten contact (Reported by Thomas Guebels) * ASTERISK-29993 - chan_dahdi: Operator control option borks both lines involved on callee disconnect (Reported by N A) * ASTERISK-30044 - GCC 12 issues (Reported by George Joseph) New Features made in this release: ----------------------------------- * ASTERISK-30063 - app_voicemail: Add option to prevent deletion of messages (Reported by N A) * ASTERISK-29965 - res_pjsip_outbound_registration: Make max registration delay configurable (Reported by N A) * ASTERISK-30087 - res_parking: Add music on hold override option (Reported by N A) * ASTERISK-30036 - app_confbridge: Add CONFBRIDGE_CHANNELS function (Reported by N A) Thank you for your continued support of Asterisk! [asterisk-announce] Asterisk 18.12.1 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.12.1. The release of Asterisk 18.12.1 resolves an issue reported by the community and would have not been possible without your participation. Thank you! The following issue is resolved in this release: Bugs fixed in this release: ----------------------------------- * ASTERISK-30065 - pjsip: Open Websocket connection is not reused for outgoing requests (Reported by LA) [asterisk-announce] Asterisk 18.12.0 Now Available The Asterisk Development Team would like to announce the release of Asterisk 18.12.0. The release of Asterisk 18.12.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: Security bugs fixed in this release: ----------------------------------- * ASTERISK-29476 - res_stir_shaken: Blind SSRF vulnerabilities (Reported by Clint Ruoho) * ASTERISK-29838 - ${SQL_ESC()} not correctly escaping a terminating \ (Reported by Leandro Dardini) * ASTERISK-29872 - res_stir_shaken: Resource exhaustion with large files (Reported by Benjamin Keith Ford) New Features made in this release: ----------------------------------- * ASTERISK-29931 - Option to allow a user to not hear the join sound on enter but everyone else can (Reported by Michael Cargile) * ASTERISK-29968 - func_db: Add a function to return cardinality of keys at prefix (Reported by N A) * ASTERISK-29486 - Hint-like extension value lookup function without device state (Reported by N A) * ASTERISK-29941 - chan_pjsip: Add ability to send flash events (Reported by N A) * ASTERISK-29820 - cli: Add command to evaluate a function (Reported by N A) * ASTERISK-29876 - app_queue: Add music on hold option (Reported by N A) Bugs fixed in this release: ----------------------------------- * ASTERISK-29655 - res_pjsip_session: No video to caller if no camera available (Reported by Michael Auracher) * ASTERISK-29638 - res_pjsip_session: No video after early media (Reported by Michael Auracher) * ASTERISK-28518 - chan_dahdi: Caller ID FSK Erroneously Sent when Picking Up Dahdi Call On Hold (Reported by Josh Alberts) * ASTERISK-29990 - chan_dahdi: adding ring cadences is not idempotent on dahdi restart (Reported by N A) * ASTERISK-30007 - chan_iax2: Prevent crashes due to attempted encryption with missing secrets (Reported by N A) * ASTERISK-29728 - menuselect: Disabled by default modules that are enabled are always recompiled (Reported by N A) * ASTERISK-30002 - app_meetme: Don't erroneously set global variables when channel is NULL (Reported by N A) * ASTERISK-29994 - chan_dahdi: Round robin array size is too small for max number of groups (Reported by N A) * ASTERISK-22246 - Asterisk's "T" flag is ignored when used with "r" or "R" flags. (documentation bug) (Reported by Rusty Newton) * ASTERISK-26582 - Asterisk seems to ignore the "n" parameter for "disable console colorization" (Reported by Sebastian Gutierrez) * ASTERISK-29843 - Session timers get removed on UPDATE (Reported by Mark Petersen) * ASTERISK-29943 - file.c: seeking to negative file offset is not prevented (Reported by N A) * ASTERISK-29955 - chan_sip: SIP route header is missing on UPDATE (Reported by Mark Petersen) * ASTERISK-29842 - Do not change 180 Ringing to 183 Progress even if early_media already enabled (Reported by Mark Petersen) * ASTERISK-29948 - iostream: Infinite TCP timeout writing data (Reported by N A) * ASTERISK-29253 - Incorrect bridging on transfer (Reported by Yury Kirsanov) * ASTERISK-30006 - res_pjsip: UDP transport does not work when async_operations is greater than 1 (Reported by Ross Beer) * ASTERISK-30024 - Failed to sign STIR/SHAKEN payload with functionality not enabled (Reported by Claude Diderich) * ASTERISK-30021 - ast_variable_list_replace_variable uses variable with new keyword (Reported by Jasper Hafkenscheid) * ASTERISK-30023 - cdr_adaptive_odbc: does not support DATETIME database columns (Reported by Gregory Massel) * ASTERISK-30015 - pjsip / WebRTC: Chrome creating large number of SDP attributes (Reported by Josh Hogan) * ASTERISK-26689 - res_pjsip_sdp_rtp: 183 Session in Progress. Disconnecting channel for lack of RTP activity (Reported by Dmitriy Serov) * ASTERISK-29929 - res_pjsip_sdp_rtp: Disconnecting channel for lack of RTP activity in one way sessions (Reported by Boris P. Korzun) * ASTERISK-29411 - Crash in pjsip_msg_find_hdr_by_name (Reported by LA) * ASTERISK-29535 - Segmentation fault in libasteriskpj.so.2 (Reported by Daniel Bonazzi) * ASTERISK-26719 - pbx: Only up to 127 includes in a dialplan context (AST_PBX_MAX_STACK - 1) (Reported by Tzafrir Cohen) * ASTERISK-29986 - build: Asterisk 18.11.0 doesn't compile when wget isn't available (Reported by Stefan Ruijsenaars) * ASTERISK-29988 - REGRESSION: The build process is requiring xmllint or xmlstarlet ro be installed when it shouldn't (Reported by George Joseph) * ASTERISK-29895 - chan_iax2: Fix misaligned spacing in iax2 show netstats printout (Reported by N A) * ASTERISK-29939 - agi: Fix xmldoc bug with set music (Reported by N A) * ASTERISK-28891 - documentation: AGICommand_set+music documentation arguments displayed incorreclty (Reported by Jonathan Harris) * ASTERISK-29048 - chan_iax2: "iax2 show registry" shows host for perceived (Reported by David Herselman) * ASTERISK-29674 - Adjust for 64bit time_t (Reported by Andre Heider) * ASTERISK-29961 - RLS: domain part of 'uri' list attribute mismatch with SUBSCRIBE request (Reported by Alexei Gradinari) * ASTERISK-29928 - logging messages truncated when using MUSL runtime (Reported by Philip Prindeville) * ASTERISK-29960 - ari: Retrieving stored recording can returns wrong file (Reported by Arix) * ASTERISK-29950 - SayNumber can handle '01' to '07', but not '08' or '09' (Reported by Jim Van Meggelen) Improvements made in this release: ----------------------------------- * ASTERISK-24827 - Missing documentation for chan_dahdi dial string ring cadences (Reported by Scott Griepentrog) * ASTERISK-29940 - general: Add since tags to xmldocs (Reported by N A) * ASTERISK-29726 - Add Asterisk External Application Protocol (AEAP) implementation (Reported by Kevin Harwell) * ASTERISK-29951 - app_mf, app_sf: Return -1 on hangup (Reported by N A) * ASTERISK-29954 - app_meetme: Emit warning if conference not found (Reported by N A) * ASTERISK-29351 - Qualify pjproject 2.12 for Asterisk (Reported by George Joseph) * ASTERISK-29976 - Should Readme include information about install_prereq script? (Reported by Marcel Wagner) * ASTERISK-29970 - Use pkg-config to find libxml2 headers and libraries (Reported by Hugh McMaster) * ASTERISK-29980 - build: External binary modules don't use https (Reported by INVADE International Ltd.) * ASTERISK-25716 - Documentation: Document explanations and examples for possible values of DIALSTATUS (Reported by Rusty Newton) * ASTERISK-29967 - pbx_builtins: Add missing documentation (Reported by N A) [asterisk-announce] Asterisk 18.11.3 Now Available Asterisk Development Team asteriskteam at digium.com Tue Apr 26 12:09:50 CDT 2022 The Asterisk Development Team would like to announce the release of Asterisk 18.11.3. The release of Asterisk 18.11.3 resolves an issue reported by the community and would have not been possible without your participation. Thank you! The following issue is resolved in this release: Bugs fixed in this release: ----------------------------------- * ASTERISK-30024 - Failed to sign STIR/SHAKEN payload with functionality not enabled (Reported by Claude Diderich) [asterisk-announce] Asterisk 16.25.2, 18.11.2, 19.3.2 and 16.8-cert14 Now Available (Security) The Asterisk Development Team would like to announce security releases for Asterisk 16, 18 and 19, and Certified Asterisk 16.8. The available releases are released as versions 16.25.2, 18.11.2, 19.3.2 and 16.8-cert14. The following security vulnerabilities were resolved in these versions: * AST-2022-001: res_stir_shaken: resource exhaustion with large files When using STIR/SHAKEN, it½½½s possible to download files that are not certificates. These files could be much larger than what you would expect to download. * AST-2022-002: res_stir_shaken: SSRF vulnerability with Identity header When using STIR/SHAKEN, it½½½s possible to send arbitrary requests like GET to interfaces such as localhost using the Identity header. * AST-2022-003: func_odbc: Possible SQL Injection Some databases can use backslashes to escape certain characters, such as backticks. If input is provided to func_odbc which includes backslashes it is possible for func_odbc to construct a broken SQL query and the SQL query to fail. [asterisk-announce] Asterisk 18.11.1 Now Available Asterisk Development Team asteriskteam at digium.com Tue Mar 29 19:15:43 CDT 2022 The Asterisk Development Team would like to announce the release of Asterisk 18.11.1. The release of Asterisk 18.11.1 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release: Bugs fixed in this release: ----------------------------------- * ASTERISK-29986 - build: Asterisk 18.11.0 doesn't compile when wget isn't available (Reported by Stefan Ruijsenaars) * ASTERISK-29988 - REGRESSION: The build process is requiring xmllint or xmlstarlet ro be installed when it shouldn't (Reported by George Joseph) [asterisk-announce] Asterisk 18.11.0 Now Available Asterisk Development Team asteriskteam at digium.com Thu Mar 24 09:06:03 CDT 2022 The Asterisk Development Tea…

0.1.56 (2024-02-14) * Land #65, Add .is_name? And Strengthen .is_ip_addr? Validation

@gmcgibbon

1.0.3 (2024-02-28) What's Changed * Prefer audio/ogg instead of audio/vorbis by @gmcgibbon in #65 * Suppress warning by @wonda-tea-coffee in #69 * Add explanation of MimeType.for's handling of argument types by @elebow in #68 * tables.rb: Generate UTF-8 strings when possible. by @casperisfine in #70 * Remove comment strings from Tables::TYPE by @casperisfine in #71 * Store MIME parents in a distinct Hash by @casperisfine in #72 * Fix magic detection for HTML with <svg by @ursm in #74 * Update gem name in Gemfile by @elebow in #88 * Move to GitHub Actions by @hahmed in #82 * Add note in README how to extend detection of custom file types by @vipulnsward in #93 * Fix Illustrator detection as application/pdf instead of application/illustrator by @jeremy in #94 New Contributors * @wonda-tea-coffee made their first contribution in #69 * @elebow made their first contribution in #68 * @casperisfine made their first contribution in #70 * @ursm made their first contribution in #74 * @hahmed made their first contribution in #82 * @vipulnsward made their first contribution in #93 * @jeremy made their first contribution in #94 1.0.4 (2024-03-01) What's Changed * Regression fix: binary declared type should fall back to filename extension type by @jeremy in #99

@TheRustyPickle

Updates Fix negative balance getting stuck at 0.00 Fix the search page not giving correct results when tx type is transfer and both from and to method fields are not filled up Fix a bug that caused unrelated transactions to show up on the home page On the Home page transactions with the same date can now be moved up with ',' and down with '.' A new option on J press to add backup locations. On q press, the latest DB will be copied there Added previously missing option to reset new app data location when the input is blank New and modified status updates for better clarity New offset-based scrolling when scrolling tables A new Activity page on 'y' press that will show activity details such as when transactions were added, deleted, edited, etc Popup help texts have been updated Dependency updates and minor performance improvements Changes Fix negative balance not loading by @TheRustyPickle in #57 Allow switching position of a tx by @TheRustyPickle in #60 Show a new info status when switching to normal tx mode by @TheRustyPickle in #65 Backup path by @TheRustyPickle in #66 Update dependencies by @TheRustyPickle in #67 Add a history page by @TheRustyPickle in #68 Fix id swap UI bug by @TheRustyPickle in #72 Update popup text by @TheRustyPickle in #74

zip-archive 0.4.3.2 * readEntry: Fix computation of modification time (#67). It should be a UNIX time (seconds since UNIX epoch), but computed relative to the local time zone, not UTC. zip-archive 0.4.3.1 * Use streaming decompress to identify extent of compressed data (#66). This fixes a problem that arises for local files with bit 3 of the general purpose bit flag set. In this case, we don't get information up front about the size of the compressed data. So how do we know where the compressed data ends? Previously, we tried to determine this by looking for the signature of the data descriptor. But the data descriptor doesn't always HAVE a signature, and it is also possible for signatures to occur accidentally in the compressed data itself (#65). Instead, we now use the streaming decompression interface from zlib's Internal module to identify where the compressed data ends. Fixes both #65 and #25.

### 1.8.10 - 15 June 2024 * feature: new "`--output`" option to write to a file instead of standard output (pull request [#90](https://codeberg.org/a-j-wood/pv/pulls/90)) supplied by [xmort](https://codeberg.org/xmort) ### 1.8.9 - 21 April 2024 * feature: new "`--si`" option to display and interpret size suffixes in multiples of 1000 rather than 1024 (pull request [#85](https://codeberg.org/a-j-wood/pv/pulls/85)) supplied by [kevinruddy](https://codeberg.org/kevinruddy) * fix: continue producing progress output when the output is blocking writes ([#34](https://codeberg.org/a-j-wood/pv/issues/34), [#86](https://codeberg.org/a-j-wood/pv/issues/86), [#87](https://codeberg.org/a-j-wood/pv/issues/87)) * fix: honour the _TMPDIR_ / _TMP_ environment variables again, rather than hard-coding "`/tmp`", when using a terminal lock file (originally removed in 1.8.0) ([#88](https://codeberg.org/a-j-wood/pv/issues/88)) * i18n: corrections and missing strings added to French translations (pull request [#83](https://codeberg.org/a-j-wood/pv/pulls/83)) supplied by [Thomas Bertels](https://codeberg.org/tbertels) ### 1.8.5 - 19 November 2023 * fix: corrected percentage formatting so it doesn't jump from 2 to 3 characters wide at 100% ([#80](https://codeberg.org/a-j-wood/pv/issues/80)) * fix: replaced "`--remote`" mechanism, using a temporary file instead of SysV IPC, so it can work reliably even when there are multiple PV instances * fix: corrected compilation failure when without IPC support * security: addressed all issues highlighted by the software auditing tools "`splint`" and "`flawfinder`" (see "`make analyse`") ([#77](https://codeberg.org/a-j-wood/pv/issues/77)) * cleanup: compilation warnings fixed on non-IPC and MacOS systems ### 1.8.0 - 24 September 2023 #### Features * feature: new "`--discard`" option to discard input as if writing to */dev/null* ([#42](https://codeberg.org/a-j-wood/pv/issues/42)) * feature: new "`--error-skip-block`" option to make "`--skip-errors`" skip whole blocks ([#37](https://codeberg.org/a-j-wood/pv/issues/37)) * feature: use `posix_fadvise()` like `cat`(1) does, to improve efficiency ([#39](https://codeberg.org/a-j-wood/pv/issues/39)) * feature: new "`--enable-static`" option to "`configure`" for static builds ([#75](https://codeberg.org/a-j-wood/pv/pull/75)) #### Security * security: with "`--pidfile`", write to a temporary file and rename it into place, to improve security * security: keep self-contained copies of name and format string in PV internal state for memory safety * security: ignore _TMP_ / _TMPDIR_ environment variables when using a terminal lock file #### Fixes * fix: only report errors about missing files when starting to transfer from them, not while calculating size, and behave more like `cat`(1) by skipping them and moving on * fix: auto-calculate total line count with "`--line-mode`" when all inputs are regular files * fix: use `clock_gettime()` in ETA calculation to cope with machine suspend/resume ([#13](https://codeberg.org/a-j-wood/pv/issues/13)) * fix: if "`--width`" or "`--height`" were provided, do not change them when the window size changes ([#36](https://codeberg.org/a-j-wood/pv/issues/36)) * fix: when a file descriptor position in "`--watchfd`" moves backwards, show the rate using the correct prefix ([#41](https://codeberg.org/a-j-wood/pv/issues/41)) * fix: rewrite terminal state save/restore so state is not intermittently garbled on exit when using "`--cursor`" ([#20](https://codeberg.org/a-j-wood/pv/issues/20)), ([#24](https://codeberg.org/a-j-wood/pv/issues/24)) #### Cleanups * cleanup: addressed many potential issues highlighted by the software auditing tools "`splint`" and "`flawfinder`" (see new target "`make analyse`") * cleanup: switched the build system to GNU Automake * cleanup: replaced the test harness with the one native to GNU Automake * cleanup: added a test for terminal width detection to "`make check`" * cleanup: added a test to "`make check`" to ensure that "`make install`" installs everything expected * cleanup: replaced *AC_HEADER_TIOCGWINSZ* with *AC_CHECK_HEADERS(sys/ioctl.h)* for better MacOS compatibility ([#74](https://codeberg.org/a-j-wood/pv/issues/74)) * cleanup: with "`--sync`", call `fsync()` instead of `fdatasync()` on incapable systems ([#73](https://codeberg.org/a-j-wood/pv/issues/73)) * cleanup: the manual is now a static file instead of needing to be built with "`configure`" #### Dropped items * dropped: dropped support for "`--enable-static-nls`" * dropped: removed the Linux Software Map file, as the LSM project appears to be long dead * dropped: will no longer publish to SourceForge as it has a chequered history and is unnecessary * dropped: removed project from GitHub and moved to Codeberg - see "[Give Up GitHub](https://giveupgithub.org/)" #### Other items * licensing change from Artistic 2.0 to GPLv3+ ### 1.7.24 - 30 July 2023 * fix: correct terminal size detection, broken in 1.7.17 by the configuration script rewrite ([#72](https://codeberg.org/a-j-wood/pv/issues/72)) * security: removed *DEBUG* environment variable in debug mode, added "`--debug`" instead * cleanup: added "`make analyse`" to run "`splint`" and "`flawfinder`" on all source files * cleanup: corrected detection of boolean capability * cleanup: word wrapping of "`--help`" output is now multi-byte locale aware * cleanup: adjusted "`indent`" rules to line length of 120 and reformatted code ### 1.7.18 - 28 July 2023 * fix: language file installation had been broken by the configuration script rewrite ### 1.7.17 - 27 July 2023 * feature: new "`--sync`" option to flush cache to disk after every write (related to [#6](https://codeberg.org/a-j-wood/pv/issues/6), to improve accuracy when writing to slow disks) * feature: new "`--direct-io`" option to bypass cache - implements [#29 "Option to enable *O_DIRECT*"](https://codeberg.org/a-j-wood/pv/issues/29) - requested by Romain Kang, Jacek Wielemborek * fix: correct byte prefix size to 2 spaces in rate display, so progress display size remains constant at low transfer rates * cleanup: rewrote `configure.in` as per suggestions in newer "`autoconf`" manuals * cleanup: replaced `header.in` with one generated by "`autoheader`", moving custom logic to a separate header file "`config-aux.h`" * cleanup: added copyright notice to all source files as per GNU standards * cleanup: changed "`--version`" output to conform to GNU standards * cleanup: replaced backticks with `$()` in all shell scripts that did not come from elsewhere, as backticks are deprecated and harder to read * cleanup: improved the output formatting of "`make test`" * cleanup: extended the "`make test`" mechanism to allow certain tests to be skipped on platforms that cannot support them * cleanup: skip the "pipe" test (for *SIGPIPE*) if GNU "`head`" is not available, so that "`make test`" on stock OpenBSD 7.3 works * cleanup: added a lot more tests to "`make test`" * cleanup: replace all calls to `sprintf()` and `snprintf()` with a new wrapper function `pv_snprintf()` to improve security and compatibility * cleanup: replace all calls to `strcat()` with a wrapper `pv_strlcat()` to improve security and compatibility * cleanup: replace all `write()` calls to the terminal with a wrapper `pv_write_retry()` for consistency * cleanup: tidy up and fix compilation warning in "`--watchfd`" code * cleanup: rewrote all local shell scripts to pass analysis by [ShellCheck](https://www.shellcheck.net) ### 1.7.0 - 17 July 2023 * dropped: support for Red Hat Enterprise Linux and its derivatives has been dropped; removed the RPM spec file, and will no longer build binaries * feature: the "`--size`" option now accepts "`@filename`" to use the size of another file (pull request [#57](https://codeberg.org/a-j-wood/pv/pull/57) supplied by [Dave Beckett](https://github.com/dajobe)) * feature: the "`--watchfd`" option is now available on OS X (pull request [#60](https://codeberg.org/a-j-wood/pv/pull/60) supplied by [christoph-zededa](https://github.com/christoph-zededa)) * feature: new "`--bits`" option to show bit count instead of byte count (adapted from pull request [#63](https://codeberg.org/a-j-wood/pv/pull/63) supplied by [Nick Black](https://nick-black.com)) * feature: new "`--average-rate-window`" option, to set the window over which the average rate is calculated, also used for ETA (modified from pull request [#65](https://codeberg.org/a-j-wood/pv/pull/65) supplied by [lemonsqueeze](https://github.com/lemonsqueeze)) * feature: the "`--watchfd`" option will now show relative filenames, if they are under the current directory (pull request [#66](https://codeberg.org/a-j-wood/pv/pull/66) supplied by [ikasty](https://github.com/ikasty)) * fix: correction to `pv_in_foreground()` to behave as its comment block says it should, when not on a terminal - corrects [#19 "No output in Arch Linux initcpio after 1.6.6"](https://codeberg.org/a-j-wood/pv/issues/19), [#31 "No output written from inside zsh <() construct"](https://codeberg.org/a-j-wood/pv/issues/31), [#55 "pv Stopped Working in the Background"](https://codeberg.org/a-j-wood/pv/issues/55) (pull request [#64](https://codeberg.org/a-j-wood/pv/pull/64) supplied by [Michael Weiß](https://github.com/quitschbo)) * fix: workaround for OS X 11 behaviour in configure script regarding stat64 at compile time (pull request [#57](https://codeberg.org/a-j-wood/pv/pull/57) supplied by [Dave Beckett](https://github.com/dajobe)) * fix: workaround for macOS equivalence of stat to stat64 - patches from [Filippo Valsorda](https://github.com/FiloSottile) and [Demitri Muna](https://github.com/demitri), correcting [#33 "Fix compilation problems due to `stat64()` on Apple Silicon"](https://codeberg.org/a-j-wood/pv/issues/33) * fix: add burst rate limit to transfer, so rate limits are not broken by bursty traffic (pull request [#62](https://codeberg.org/a-j-wood/pv/pull/62) supplied by [Volodymyr Bychkovyak](https://github.com/vbychkoviak)) * fix: corrected "`--force`" option so it will still output progress when not in the same process group as the owner of the terminal - corrects [#23 "No output with "`-f`" when run in background after 1.6.6"](https://codeberg.org/a-j-wood/pv/issues/23) and helps to correct [#31 "No output written from inside zsh <() construct"](https://codeberg.org/a-j-wood/pv/issues/31) * fix: corrected elapsed time display to show as D:HH:MM:SS after 1 day, like the ETA does - corrects [#16 "Show days in same format in ETA as in elapsed time"](https://codeberg.org/a-j-wood/pv/issues/16) * fix: corrected bug where percentages went down after 100% when in "`--numeric`" mode with a "`--size`" that was too small - corrects [#26 "Correct "`-n`" behaviour when going past 100% of "`-s`" size"](https://codeberg.org/a-j-wood/pv/issues/26) * i18n: recoded Polish translation file to UTF-8 * i18n: removed inaccurate fuzzy translation matches * docs: moved all open issues into GitHub and updated the TODO list * docs: renamed README to README.md and altered it to Markdown format * docs: moved contributors from the README to docs/ACKNOWLEDGEMENTS.md * docs: moved TODO to TODO.md and altered it to Markdown format * docs: moved NEWS to NEWS.md, converted it to UTF-8, and altered it to Markdown format

Based on PR 58426 by jonathan buschmann. ## 2.4.7 2024-05-05 ### Fixed - docs(pop): clarify --spill behavior (#445) - fix(branch): disallow branch before subcommand (#447) ### Changed - refactor: get gix-command via gix with command feature - Update gix to version 0.62 ## 2.4.6 2024-04-07 ### Fixed - fix(bash): fix completion for "committish" ### Changed - docs: Update copyright year - chore: update gix to 0.61.1 - ci: update to wix 4.0.5 ## 2.4.5 2024-02-18 ### Fixed - fix: stdout from hooks (#418) ### Changed - chore: add category and keywords to Cargo.toml - build: exclude some paths from crate - docs(readme): enumerate more package repositories - chore: update dependencies ## 2.4.4 2024-02-11 ### Fixed - fix: pass stdio for interactive editing (#415) - fix: update gix-tempfile and gix-lock to 13.1.0 (#413) ### Changed - chore: update dependencies ## 2.4.3 2024-02-04 ### Added - feat(branch): allow delete of current branch ### Fixed - fix(branch): delete branch config with branch - fix: use gix-command for interactive edit (#407) - fix: improved interactive editor diagnostics - chore: update gix to 0.58.0 (#407) - docs: fix dates in changelog ### Changed - refactor(branch): use gix to rename config section - refactor: use gix to remove stgit branch config - refactor: use gix-command for hooks - refactor: use non-deprecated indexmap methods - ci: update cargo-generate-rpm to 0.14.0 - ci: update to upload-artifact@v4 - ci: restore use of IO::Pty in MacOS build ## 2.4.2 2023-12-26 ### Changed - feat(pop): allow unescaped negative patch offsets - feat(show): allow unescaped negative patch offsets - chore: update dependencies ## 2.4.1 2023-12-10 ### Fixed - fix(zsh): short -r opt for `stg series` ### Changed - chore: update gix to 0.56.0 - chore: update transient dependencies ## 2.4.0 2023-10-08 ### Added - feat(delete): --all -A -U -H options - feat(sink): -T/--above option - feat(branch): short opts for clone and delete ## 2.3.3 2023-10-04 ### Fixed - fix(zsh): -S option for float, import, and sync - build: avoid non-portable install options - test: improved test script portability ### Changed - update dependencies ## [2.3.2] 2023-08-19 ### Fixed - fix!(uncommit): check for HEAD/top mismatch (#360) - docs: docstring spelling and formatting fixes ### Changed - feat(uncommit): print uncommited patches - pin serde to avoid using precompiled binary - update dependencies ## [2.3.1] 2023-07-25 ### Fixed - fix(zsh): typo in completion help for stg commit --all - fix: use canonical Message-ID spelling - fix(stgit.el): recognize new empty patch marker - fix(import): Keep first line break in body ### Changed - update dependencies ## [2.3.0] 2023-05-25 ### Removed - import-compressed is always enabled, no longer a feature ### Added - unofficial deb and rpm packages - msi package for Windows ### Fixed - fix(import): would panic without import-url feature - fix(import): patch numbers not stripped from name ### Changed - use bzip2-rs instead of bzip2 crate - update dependencies ## [2.2.4] 2023-05-15 ### Added - feat: Upgrade from ancient stack state formats (#235) ### Fixed - fix(branch): create based on remote branch (#317) - fix(import): lost subject lines resembling header (#321) - fix(import): subject line may be discarded ### Changed - chore: update dependencies ## [2.2.3] 2023-04-26 ### Fixed - fix: error using on Windows (#273) - fix: path handling for Windows compatibility - fix: commit-msg hook run from work root - fix: avoid "stg.exe" in usage on Windows - fix: use gitattributes to force LF endings on Windows - fix: wrap hooks with sh on Windows ### Changed - chore: update to gix 0.44.0 - chore: update other dependencies ## [2.2.2] 2023-04-01 ### Fixed - fix: rebase with '@' in ref names (#306) - fix: improved error messages for unrecognized commands ## [2.2.1] 2023-03-29 ### Changed - chore: update to clap 4.2.0 - chore: update to gix 0.43.0 - chore: pin clap minor version ### Fixed - fix(branch): allow reuse of partially deleted branch names (#290) - fix(branch): branch list alignment - fix: running hooks from worktree subdir (#295) - fix: running from linked worktree (#297) - fix(float): correct -S in usage string - fix: correctly show bold command/subcommand in overidden usage ## [2.2.0] 2023-02-24 ### Removed - feat!: remove short -s option for --submodules - fix!: patch name cannot be {base} or @ ### Added - feat: patch locator syntax - feat: locate branches using @{-N} syntax - feat(series): Add --reverse option - feat(series): options for patch offsets and indices - feat(series): --no-xxx options to override display options - feat(series): optional value for --short - feat!: short -s option for --signoff (#245) - feat(init): add -b/--branch option ### Changed - fix!: use -S as short opt for --series - feat!: constrain refresh -p to visible patches - feat(series)!: empty patch prefix changed to * - feat!: spell errors in lowercase - refactor: use gitoxide instead of git2 - refactor: use time crate instead of chrono - feat!: update to clap 4.1 - chore: update to latest dependencies ### Fixed - fix: Error if author or committer is not configured - fix: Use correct base directory for core.hooksPaths - fix(rename): colliding patch names - fix(rebase): repair rebasing to a tag (#265) - fix(branch): switch branch with detached head - docs: Repair docstrings being confused as html - docs: normalized spelling for --branch value ## [2.1.0] 2022-12-12 ### Added - feat: Configurable push conflict policy (#60) - feat: Add --committer-date-is-author-date option (#47) - feat(import): Add --3way option (#36) - feat(import): Add --directory option (#36) ### Changed - feat!: Relaxed stack initialization (#238) - feat!: Only sign stack based on stgit.gpgsign (#238) - fix!: Allow "---" separator in messages (#243) - feat: More descriptive push conflict message (#60) - feat: Avoid post-edit commits when no change - chore: Update dependencies to latest versions ### Fixed - fix: Improved error message for uninitialized stack - fix: Improve error for re-initialization attempt - fix(prev): Different error message for empty stack - fix: Accept full ref name for branches - fix(zsh): Complete --edit and --diff for stg new ## [2.0.4] 2022-11-30 ### Changed - docs: Document configuration variables - refactor: Use is-terminal instead of atty - chore: Update Cargo.lock with latest dependencies. ### Fixed - fix: Don't generate new patch name until after edit (#239) - fix: Run shell aliases from top-level of work tree - fix: Use GIT_PREFIX in built-in aliases ## [2.0.3] 2022-11-21 ### Changed - chore: Update Cargo.lock with latest dependencies. ### Fixed - fix: improved git version parsing on MacOS - fix: StGit-specific branch config handling - docs: fixed many typos ## [2.0.2] 2022-11-17 ### Changed - chore: Update Cargo.lock with latest dependencies. - docs(init): Add long help for `stg init`. ### Added - feat: Enable basic support for `extensions.worktreeconfig` to unblock sparse checkout with partial clone (#195). ### Fixed - docs: More inter-command links - docs: Normalize quoting ## [2.0.1] 2022-11-07 ### Changed - chore: Update to clap 4.0.22 ### Fixed - docs(readme): Clarify static versus dynamic linking (#230) - build: Improve Documentation build performance (#229) ## [2.0.0] 2022-11-06 ### Removed - `stg clone` is removed. Use `git clone` and `stg init` instead. - `stg mail` is replaced with `stg email format` and `stg email send`. - `stg refresh --spill` is replaced with dedicated `stg spill` command. - `stg edit` no longer accepts `-O/--diff-opts`. Custom diff options is in conflict with editable diffs since many (most?) diff options cause the diff to no long be applicable. - `stg files` no longer accepts `-O/--diff-opts`. This option was of marginal value since it only had a possible side effect when `--stat` was being used. ### Added - `stg id` now accepts the `-b/--branch` option. - `stg completion` command provides runtime support for shell completions. - `stg completion bash` generates bash shell completion script. - `stg completion fish` generates fish shell completion script. - `stg completion zsh` outputs zsh shell completion script. - `stg completion list` shows StGit commands and aliases and is used at completion-time by shell completion scripts. - `stg completion man` generates man pages in asciidoc format. - `stg email format` wraps `git format-patch` and provides a mechanism to generate patch emails and optional cover letter in mbox format. - `stg email send` wraps `git send-email` and allows sending patch emails, either from files generated by `stg email format` or by specifying patches directly. - `stg new --refresh` allows a new patch to be refreshed with changes in one step. The `-i/--index`, `-F/--force`, `-s/--submodules`, and `--no-submodules` options from `stg refresh` are also available to `stg new` when using `-r/--refresh`. - `stg series` gains the `-i/--commit-id` option to display patches' commit ids. - `stg show` diff output can now be limited to certain paths by specifying path limits on the command line. - `stg spill` replaces `stg refresh --spill`. - `stg version` gains `-s/--short` flag to show shortened version info. - Added documentation for patch range syntax to stg(1) man page. - Added `install-all` target to top-level Makefile that installs the executable, man pages, html pages, and shell completions. ### Changed - StGit is now implemented entirely in Rust instead of Python. - StGit is generally much faster; many commands are up to 4x faster. There was an emphasis on making informational commands such as `stg id`, `stg series`, and `stg top` as fast as possible to make their use in interactive contexts (shell prompts, IDE extensions) more comfortable. - StGit error messages have been updated; many have different, and hopefully better, wording. Error messages are also use color (when color is enabled). Scripts relying on exact error messages from StGit will need to be updated. - StGit output to stdout is generally more terse. Commands that change the stack such as `push`, `pop`, and `commit`, use sigils to denote the changes made to the stack. E.g. `stg commit p0..p3` will output `$ p0..p3` where the "$" sigil means that a patch, or patch range, has been committed. These are all the currently used stack change sigils: - `+` patch was pushed - `-` patch was popped - `>` patch became the current topmost patch - `&` patch was updated - `$` patch was committed - `#` patch was deleted - `@` patch was rolled-back - `!` patch was hidden - StGit aliases are now more like Git aliases. Normal aliases refer to StGit subcommands, but aliases prefixed with '!' are shell aliases that may run arbitrary commands. An example normal alias would be `git config stgit.alias.list 'series --description --empty'`. An example shell alias would be `git config stgit.alias.st '!git status --short'`. - Commands such as `stg goto`, `stg push`, and `stg pop` now require full/correct patch names on the command line and no longer accept unambiguous patch name prefixes. When an inexact patch name is provided on the command line, the error message will now suggest similar valid patch names. - Additional template search paths were added. In addition to looking for template files in .git/, also look in `$XDG_CONFIG_HOME/stgit/templates/` and `$HOME/.stgit/templates`. This search strategy is consistent with how git looks for the global config file. - The new `--signoff` patch edit option supersedes the deprecated `--sign` and `--sign-by` options. `--signoff` without its optional value does the same thing as `--sign`, while `--signoff=<value>` does the same thing as `--sign-by=<value>`. - The `--ack` and `--review` patch edit options now optionally take a value. The `--ack-by` and `--review-by` options are deprecated. - `stg branch` output is now generally less verbose. - `stg branch --describe` replaces `stg branch --description`. The `--description` subcommand remains supported as a hidden alias to `--describe`, but the description string must now be provided as its own argument; i.e. `--description="description string"` is no longer supported. - `stg branch --list` now produces colorized output. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stg branch --rename` now supports renaming regular git branches in addition to StGit-enabled branches. - `stg clean` now uses `-A` and `-U` short options for `--applied` and `--unapplied` instead of `-a` and `-u`. This is done for consistency with `stg series` and `stg show`. - `stg import` now only recognizes compressed patches by their file extension (`.bz2` or `.gz`) and no longer proactively attempts to decompress using all known decompressors. - `stg import` support for compressed input files is selectable at compile time using the `import-compressed` feature. - `stg import` support for importing from a URL is selectable at compile time using the `import-url` feature. **N.B.** there is a measurable runtime performance impact of building with `import-url` due to the unconditional, pre-main initialization of `curl` which affects **all** `stg` commands. - `stg log` now colorizes output by default. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stgit.new.verbose` changed to `stgit.edit.verbose` and now also affects edit behavior for `edit`, `refresh`, and `squash` along with `new`. - `stg new` now accepts `-e/--edit` and `-d/--diff` instead of `-v/--verbose` - `stg pick` now allows a mix of commits and patches to be picked whereas previously only a single commit xor multiple patches could be picked. - `stg pick` now performs a single stack transaction for all the picked patches/commits instead of one transaction per pick. - `stg push` now attempts to perform three-way merges, which may improve conflict resolution in some cases. This feature is enabled by default when git >= 2.32.0 is detected. - `stg rebase --interactive` the "squash" and "fixup" instructions may no longer be applied to the first patch in the instruction list. The stated semantics of both "squash" and "fixup" is that they squash the labeled patch with the preceding patch, which is not possible/valid when there is no preceding patch. - `stg refresh` no longer has a `--spill` flag. Use `stg spill` instead. - `stg series` has updated colorized output. - `stg series` now requires patch range arguments to be both in-order and contiguous. Constraining patch ranges in this manner ensures that the output from `stg series` is always a valid/correct view of a subset of the series. - `stg show` diff output respects the `--color` option. - `stg squash` now allows the full suite of patch edit options, including `-d/--diff`. Previously only a few message-related options were available. - `stg version` now displays copyright and license statements. ### Fixed - `stg branch --create` inherits the current branch's remote branch configuration, if available. The Python implementation had an apparent bug that prevented inheriting the remote branch configuration when creating from the current branch. - Avoid case insensitive patch name collisions. On operating systems with case-insensitive paths, patch names that only differ by case lead to patch reference collisions. StGit now ensures that patch names are distinct under case insensitive comparisons. - `stg pull` and `stg rebase` record updated stack state instead of deferring until the next stack-modifying command to do so. ### Changed since 2.0.0-rc.2 #### Changed - chore: Update Cargo.lock #### Fixed - fix(zsh): Repair broken completion of --git-opt - fix(zsh): Add missing `stg email send --branch` - fix(email): Send using --branch option - fix: Avoid duplicate signoff with stgit.autosign - fix: Do not use 3way for merged checks ## [2.0.0-rc.2] 2022-10-23 ### Changed - The `--diff-opts` option is renamed to `--diff-opt`. `--diff-opts` remains available as an alias. - The `--diff-opt` option no longer allows multiple git options per occurrence. This allows git diff options with spaces in their values. - The `--git-opts` option for `stg email format` and `stg email send` is renamed `--git-opt`. - The `--git-opt` option no longer allows multiple git options per occurrence. This allows git options with spaces in their values. - Zsh completion for `--diff-opt` and `--git-opt` leverage the full-featured git completion capability. ### Fixed - Repair check for modifications to stack by external tools. - `stg pull` and `stg rebase` record updated stack state instead of deferring until the next stack-modifying command to do so. - Improve patch application with `git apply --3way` when pushing` (#225) - Zsh completion for `--diff-opt` accommodates multiple occurrences ## [2.0.0-rc.1] 2022-09-30 ### Added - Added `--annotate` flag to `stg email send`. - Added `-p`/`--patch` option to `stg show` as alternative way to select patch ranges (#216). - Added `-n`/`--name` option to `stg new` as alternative way to specify new patch name (#216). ### Changed - Update `git2` to 0.15.0, which may further help compatibility with sparse checkouts and multiple worktrees (#195). - Update to `clap` 4.0, which changes the help formatting and coloring. - Update other dependencies to latest versions in Cargo.lock. - No longer depend on `lazy_static` crate. - Use `std::thread::scope` instead of custom mechanism. This brings the total number of uses of `unsafe` in StGit to zero. - Minimum rustc requirement is set to 1.63.0. - The '$' sigil used for committed patches is now yellow instead of white. - Patch names beginning with a hyphen '-' may be disambiguated from command line options by escaping the leading '-' with a backslash. - `stg email format` and `stg email send` now use `-G`/`--git-opts` to pass additional options to `git format-patch` and `git send-email`. - Patch name arguments to `stg email format` and `stg email-send` can now be placed after a `--` separator (#216). - Update top-level usage help for `stg`. ### Fixed - Various errors that may occur when executing a stack transaction are now handled more robustly such that the changes from the transaction are rolled-back so that the stack, repository, and worktree are all in a consistent state (#205). - The `stg uncommit -h` usage indentation is repaired. - The `stg float` usage now shows the two distinct usage modes. - `stg squash --name` allows patch names with leading '-'. - `stg diff --range` allows patch names and ranges with leading '-'. - Fix some pre-indented paragraphs in help/about strings. - Zsh completion for `stg edit` incorrectly included -O/--diff-opts. - Zsh completion for `stg files` incorrectly included -O/--diff-opts. ## [2.0.0-beta.3] 2022-08-28 ### Added - Add install targets for `contrib/` directory. ### Changed - Use `git` executable instead of `libgit2` for all status and index operations to improve compatibility with sparse index checkouts (#195). - Show commit hash in `stg version` output when not built from tag. - Use `cargo --locked` consistently in Makefiles. - Use "patch" extension in temp file name when editing a patch with a diff. - Updated transient dependencies in Cargo.lock. ### Fixed - Repair `stg branch --describe` panic when run without arguments - Repair zsh completions for `git branch` - Repair `stgit.el` to use compatible `stg show` commands (#202). - Repair `stg uncommit --to` to work with annotated tags (#203). - Repair `make install` to not install cargo tracking files. ## [2.0.0-beta.2] 2022-08-05 ### Changed - Improved error when push conflicts with untracked files (#193) - Removed a few transitive dependencies by turning-off features in bstr and chrono. - Update Cargo.lock with latest dependencies - Update to clap 3.2 and only use non-deprecated interfaces ### Fixed - Repair `stg spill` when spilling newly added files and using path limits. ## [2.0.0-beta.1] 2022-07-28 ### Removed - Removed Python implementation of StGit. ### Added - Man page generation in asciidoc format with `stg completion man`. This was needed for feature parity with the Python implementation. - Added documentation for patch range syntax to stg(1) man page. - Added `install-all` target to top-level Makefile that installs the executable, man pages, html pages, and shell completions. ### Changed - Additional template search paths were added. In addition to looking for template files in .git/, also look in `$XDG_CONFIG_HOME/stgit/templates/` and `$HOME/.stgit/templates`. This search strategy is consistent with how git looks for the global config file. - Makefile targets are updated such that they are all applicable to the Rust implementation. - Argument value names are now all lowercase in help and man pages. - Updated Cargo.lock with latest versions of dependencies. - Release checklist is updated for Rust implementation. ### Fixed - Minor typo fixes in help strings - Improved documentation for top-level `stg` options. - Improve error message in edge case of attempting to push a hidden patch by name when there are no unapplied patches. ## [2.0.0-alpha.2] 2022-07-07 ### Added - `stg email format` wraps `git format-patch` and provides a mechanism to generate patch emails and optional cover letter in mbox format. - `stg email send` wraps `git send-email` and allows sending patch emails, either from files generated by `stg email format` or by specifying patches directly. ### Changed - Bash completions for shell aliases now fallback to filename completions (#191). - Help options listings now ensure --color and --help are shown last. - Various zsh completion improvements: - Add descriptions for --color values - Complete -O/--diff-opts values (using `git diff-tree --git-completion-helper`) - Comprehend `stg -C <dir>` options - Improved/corrected alias expansion - Improved error messages when completion is attempted outside git repo and/or StGit-initialized branch - Patch name completions now look and feel like output from `stg series` - Complete patch range syntax ('patch0..patchN') for all relevant commands - Completion for `stg squash` no longer allows duplicate patch name arguments - Removed completions for removed `stg mail` command - Completion for `stg sink` no longer offers hidden patches - Completion for `stg rename` comprehends second, new patch name argument - Completion for `stg diff --range` now works ### Fixed - Compatibility with git versions prior to 2.35.0 is repaired by avoiding using `git apply --allow-empty` (#192). - Fish completions for -O/--diff-opts are repaired ## [2.0.0-alpha.1] 2022-06-17 ### Added - `stg series` gains the `-i/--commit-id` option to display patches' commit ids. - `stg series` colorized output is modified. The main change is that patch descriptions are no longer yellow. - `stg version` now displays copyright and license statements. - `stg version` gains `-s/--short` flag to show shortened version info. - The `stgit.diff-opts` configuration variable is now respected as it was in the Python implementation. - `stg completion` command provides runtime support for shell completions. - `stg completion bash` generates bash shell completion script. - `stg completion fish` generates fish shell completion script. - `stg completion zsh` outputs zsh shell completion script. - `stg completion list` shows StGit commands and aliases and is used at completion-time by shell completion scripts. ### Changed - The `-O/--diff-opts` flag now allows both multiple space separated opts in one value as well as multiple occurrences of `-O/--diff-opts` on the same command line. This behavior is compatible with the Python implementation. - `stg series` help output splits options into a few sections. - Dependencies are updated to more recent versions in Cargo.lock. ### Fixed - `stg edit --set-tree` no longer causes the interactive editor to be implicitly invoked. - Repair build for non-Linux unix targets (including MacOS) and Windows targets. - Avoid case insensitive patch name collisions. On operating systems with case-insensitive paths, patch names that only differ by case lead to patch reference collisions. StGit now ensures that patch names are distinct under case insensitive comparisons. - Add missing `-t` short option for `--set-tree` for `stg edit`. - Add missing `-k` short option for `--keep`. ## [2.0.0-alpha.0] 2022-05-17 ### Removed - `stg edit` no longer accepts `-O/--diff-opts`. Custom diff options is in conflict with editable diffs since many (most?) diff options cause the diff to no long be applicable. - `stg files` no longer accepts `-O/--diff-opts`. This option was of marginal value since it only had a possible side effect when `--stat` was being used. - `stg clone` is removed (at least for the time being). Use `git clone` and `stg init` instead. - `stg mail` is removed, but will be re-added or replaced prior to the 2.0.0 release. ### Added - `stg new --refresh` allows a new patch to be refreshed with changes in one step. The `-i/--index`, `-F/--force`, `-s/--submodules`, and `--no-submodules` options from `stg refresh` are also available to `stg new`. - `stg id` now accepts the `-b/--branch` option. - `stg spill` replaces `stg refresh --spill`. ### Changed - StGit aliases are now more like Git aliases. Normal aliases refer to StGit subcommands, but aliases prefixed with '!' are shell aliases that may run arbitrary commands. An example normal alias would be `git config stgit.alias.list 'series --description --empty'`. An example shell alias would be `git config stgit.alias.st '!git status --short'`. - The `--ack` and `--review` options now optionally take a value. The `--ack-by` and `--review-by` options are deprecated. - Commands such as `stg goto`, `stg push`, and `stg pop` now require full/correct patch names on the command line and no longer accept unambiguous patch name prefixes. When an inexact patch name is provided on the command line, the error message will now indicate similar valid patch names. - `stg branch` output is now generally less verbose. - `stg branch --describe` replaces `stg branch --description`. The `--description` subcommand remains supported as a hidden alias to `--describe`, but the description string must now be provided as its own argument; i.e. `--description="description string"` is no longer supported. - `stg branch --list` now produces colorized output. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stg branch --rename` now supports renaming regular git branches in addition to StGit-enabled branches. - `stg clean` now uses `-A` and `-U` short options for `--applied` and `--unapplied` instead of `-a` and `-u`. This is done for consistency with `stg series` and `stg show`. - `stg import` now only recognizes compressed patches by their file extension (`.bz2` or `.gz`) and no longer attempts to decompress using all known decompressors. - `stg import` support for compressed input files is selectable at compile time using the `import-compressed` feature. - `stg import` support for importing from a URL is selectable at compile time using the `import-url` feature. - `stg log` now colorizes output by default. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stgit.new.verbose` changed to `stgit.edit.verbose` and now affects edit behavior for `edit`, `refresh`, and `squash` along with `new`. - `stg new` now accepts `-e/--edit` and `-d/--diff` instead of `-v/--verbose` - `stg pick` now allows a mix of commits and patches to be picked whereas previously only a single commit xor multiple patches could be picked. - `stg pick` now performs a single stack transaction for all the picked patches/commits instead of one transaction per pick. - `stg rebase --interactive` the "squash" and "fixup" instructions may no longer be applied to the first patch in the instruction list. The stated semantics of both "squash" and "fixup" is that they squash the labeled patch with the preceding patch, which is not possible/valid when there is no preceding patch. - `stg refresh` no longer has the `--spill` flag. Use `stg spill` instead. - Updated colorized output for `stg series`. - `stg series` now requires patch range arguments to be both in-order and contiguous. Constraining patch ranges in this manner ensures that the output from `stg series` is always a valid/correct view of a subset of the series. - `stg show` diff can now be limited to certain paths by specifying path limits on the command line. - `stg show` diff output respects the `--color` option. - The new `--signoff` patch edit option supersedes the deprecated `--sign` and `--sign-by` options. `--signoff` without its optional value does the same thing as `--sign`, while `--signoff=<value>` does the same thing as `--sign-by=<value>`. - `stg squash` now allows the full suite of patch edit options, including `-d/--diff`. Previously only a few message-related options were available. ### Fixed - `stg branch --create` inherits the current branch's remote branch configuration, if available. The Python implementation had an apparent bug that prevented inheriting the remote branch configuration when creating from the current branch. ## [1.5] 2022-01-28 ### Removed ### Added - Add Makefile targets for installing shell completions - `stg rebase --interactive` learns 'hide' instruction ### Changed - Picked patch names are preserved when possible (#175) - Replace `--unapplied` option with `--noapply` for `stg pick` (#174) - `stg pick --noapply` no longer reverses patch order (#174) - Use `stg version` uses `sys.executable` to get Python version. ### Fixed - Repair `stg repair` with amended first patch (#163) - Repair corner cases where invalid patchnames could be generated by `stg new`, `stg uncommit`, etc. (#176) - `stg mail` could crash due to a misspelled reference (#178) - Zsh completion for `stg refresh -p` now completes against all patches (not just applied patches). - Zsh gains missing completion for `stg push --noapply` - Minor repair to help for `stg float --noapply` and `stg push --noapply` - Restore `stg sink --nopush` capability. ## [1.4] 2021-10-27 ### Removed - Python 3.5, which became EOL 2020-09-13, support is deprecated and will be removed in a future StGit release - Python 3.6, which will be EOL 2021-12-23, support is deprecated and will be removed in a future StGit release ### Added - The new `stg import --message-id` option causes the Message-ID from imported emails to be included as the Message-Id trailer in the patch description (#42) - The new 'stgit.import.message-id' config option also enables the Message-Id trailer (#42) ### Changed - `stg import` no longer creates "Message-Id" trailer by default when importing patches from email (#42) - StGit works with Python 3.10 - `stg version` prints a more abbreviated Python version - `stg commit` will no longer commit empty patches by default; the `--allow-empty` option may be used to override this behavior (#158) - The `stgit.main.main()` function now takes an argv parameter and returns an int return code in most cases instead of calling sys.exit(), thus making main() a bit easier to use as an API. ### Fixed - Repair stack upgrade with `stg branch --list` (#155) - Repair crash in `stg squash` with out of order patches and no name specified (#157) - Zsh completions learn `stg float --noapply` option - Zsh completion for `stg sink` now allows multiple patches ## [1.3] 2021-09-26 ### Removed ### Added ### Changed ### Fixed - Repair crash regression when using `stgit.autosign` ## [1.2] 2021-09-26 ### Removed ### Deprecated - Python 3.5, which became EOL 2020-09-13, support is deprecated and will be removed in a future StGit release - Python 3.6, which will be EOL 2021-12-23, support is deprecated and will be removed in a future StGit release ### Added - `stg rebase ` learns `--interactive`; easily re-order, edit, squash, fixup, or delete patches via your editor - `stg rebase` learns `--autostash`; stash changes before the rebase and apply them after. Also configurable with the `stgit.autostash` configuration option - `stg edit` can now rename patches (#119) - `stg edit` gains helpful instructions (#138) - `stg new` learns `--verbose`, which includes a diff in the editor window (similar to `git commit --verbose`). This behavior is also configurable with the `stgit.new.verbose` configuration option - `stg push` and `stg float` learn `--noapply` option; allows patches to be reordered without updating worktree and deferring merge conflict resolution (#144) - `stg edit`, `stg refresh`, and `stg new` learn the `--sign-by`, `--ack-by`, and `--review-by` options which allow those respective trailers' values to be specified by the user on the command line (#92) ### Changed - Stack metadata version 5; stack metadata is moved from `refs/heads/<branch>.stgit` to `refs/stacks/<branch>` and the stack metadata file now uses a JSON format instead of the prior custom format; the stack metadata will be upgraded to v5 on first use of this version of StGit; like all stack metadata upgrades, **this is a one-way auto-upgrade for existing stacks** (#65) - Use setuptools instead of distutils for packaging - No git or python version checks in setup.py - Use different dynamic versioning system - Install `stg` executable as console_script entry point - More sophisticated search for bash.exe on Windows when running hooks - The editor window text for `stg squash` has been modified to mirror git's behavior -- the squash edit message now includes all commits (#71) - Binary diffs are no longer shown when with `stg edit -d` - Multiple trailers can now be added at once; this is now allowed, for example: `stg edit --sign --review --ack` - Update zsh completion for `stg rebase` to show local and remote heads (#102) - Zsh completions for commands with patch arguments now comprehend the effect of `-b/--branch` and `-B/--ref-branch` - Zsh completions now guard patch names--one less TAB press to complete patch names in certain contexts - `stg import` now extracts the `Message-ID` email header into the patch message (#42) ### Fixed - Repair crash when attempting to export empty patch (#112) - Exact command name matches are unambiguous (#110) - Exiting with an empty `stg edit` editor will now abort the edit; previously it would delete your commit message. (#138) - Repair completions when stg.series.description is enabled in config - Workaround child process reaping race on Windows (#78) - Repair crash with `stg float --series` when bad patch name in series - Repair zsh completion for `stg float` to accept multiple patch names - Repair zsh completion for changed files, affecting `stg refresh` and `stg diff` ### Internal - Add link to coverage.io project to CONTRIBUTING.md - Set smart `exclude_lines` default for 'coverage' - Expanded test suite for `stg edit` - Add pkgtest.py script to help test StGit packaging - Cleanup .gitignore files ## [1.1] 2021-04-30 ### Removed ### Added - StGit GPG-signs patches when `commit.gpgsign` is set (#12) - Support `core.hooksPath` in git config - Add `-C` option for `stg import` and `stg fold` (#18) ### Changed - Allow importing mail and series from urls (#94) - `stg refresh --edit` may also use `--diff` and `--diff-opts` (#98) - `stg goto` allows sha1 of a patch instead of patch name (#93) ### Fixed - Repair hang in `stg pull -m`, `stg goto -m`, and `stg push -m` - Repair `stg mail` to show diffstat of whole series (#104) - Repair MANIFEST.in to include AUTHORS.md and README.md files ## [1.0] 2021-02-07 ### Removed - Drop support for Python < 3.5 - Remove previously deprecated `stg publish` command - Removed contrib scripts: `stg-swallow`, `stg-fold-files-from`, `stg-dispatch`, `stg-whatchanged`, and `stg-show-old` ### Added - The pre-commit hook is now run for `stg refresh` - New `--spill` option for `stg refresh` - Add stgit.series.description config option (#88) - Official support for Python versions up to 3.9 ### Changed - Stack metadata format 4. All metadata now kept in Git objects; no more stack state files in .git/patches. **A one-way auto-upgrade to format version 4 will occur when StGit commands are run on an existing StGit branch.** - Use `python3` in shebangs instead of `python` - `contrib/stgbashprompt.sh` is no longer executable - Internal docstrings now use reStructuredText instead of Epytext ### Fixed - Importing large patches is much, much faster (#66) - Other performance improvements when dealing with large patches - Repair diffstat when outside work tree root (#62) - Use encoded (string) environment variables on Windows (#79) - Fix `stg pull` when no upstream is configured (#83) - Fix `refresh` crash with path limiting and files added to index (#85) - Repair `new` with patchdescr.template crash (#87) - Repair `log` from worktree subdir with patches specified - Repair `import` allowing/generating duplicate patch names (#64) - Repair `mail --auto` to strip comments after addrs (#91) ## [0.23] 2020-06-12 ### Removed - Drop support for Python 3.3; Python 2 (2.6 and 2.7) remain deprecated, but supported for one last release - Tutorial is removed; it now exists as part of the website ### Deprecated - Python 2.x support is deprecated and will be removed in a future release ### Added - Support html5 output of docs from asciidoc - Add `--expose` option for `stg pick` to allow picked commit message to be customized ### Changed - Limit mail diffstat to 72 columns - Added pyproject.toml file for black configuration - Minimum Git version is 2.2.0 - Quote stg and subcommand in man page synopsis - Replaced RELEASENOTES with this CHANGELOG.md - Replaces Documentation/SubmittingPatches with CONTRIBUTING.md ### Fixed - Repair MANIFEST.in and generated source dist - Repair importing mail with ": " (colon space) in subject - Fix mail cover letter shortlog - Fix mail cover letter diffstat - `stg series` now only outputs colors when `isatty()` - Repair mail SSL check (#57) - Repair `stg mail` with both `-a` and `-e` options (#58) - Remove empty short-opt for `--no-submodules` of `stg refresh` - Repair build.py for Python 2 with explicit `flush()` - `stgit.refreshsubmodules` added to sample gitconfig ### Internal - Update docs build system from upstream Git docs - Use coverage contexts to map commands to covered lines - Improve mail tests - Use GitHub Actions instead of TravisCI - Format StGit source using black formatter ## [0.22] - 2020-03-02 ### Removed - Remove debian packaging; downstream Debian uses its own anyway ### Deprecated - Python 2.x support is deprecated and will be removed in the next StGit release - `stg publish` is deprecated and will be removed in the next StGit release ### Added - `stg import` has new --keep-cr option, like `git mailsplit` ### Changed - `stg new` now includes patch name in log message - `stg branch --rename` can now rename the current branch - `stg branch --create` now works even if the workspace is dirty, consistent with `git checkout` - `stg branch --description` now works on both regular and stgit branches - `stg edit --diff` now implies `--edit` - `stg refresh` and `stg edit` now reset the committer information, consistent with `stg push` - git notes are now preserved when patches are modified - Tutorial improvements - Many additional tests and test improvements - All stgit commands now use "new" git library infrastructure ### Fixed - `stg branch --create` inherits remote correctly from parent committish - Patch names are checked earlier to avoid inconsistent stack states - Improved commit data parsing and handling of non-UTF8 encodings - Repair git error messages when checking stgit version from outside a git repo ## [0.21] - 2019-10-28 ### Changed - Faster handling of large patches (#44) ### Fixed - Build reproducibility repairs (Thanks reproducible-builds.org team!) - Python can now be run with optimizations (`python -O`) - `stg log` now prints trailing newline - Improved command line option parsing for `stg log` ## [0.20] - 2019-10-04 ### Added - `stg patches -d` can now output colored diffs. - `stg publish --overwrite` allows branch to be overwritten instead of creating new commits. - `stg log --clear` deletes the stack's log history. Use with caution. - Fish shell completions for stg. - Zsh completions for stg. - `stg mail --domain` option overrides the host's domain in the message ID. ### Changed - Branch protection metadata now captured in config instead of .git/patches/<branch>protect file. This updates stgit's metadata format from v2 to v3. - `stg diff` no longer shows binary diffs by default. Use `-O--binary` or add `--binary` to stgit.diff-opts in config. - Diagnostic output is now routed to stderr instead of stdout. Diagnostic output is also now sent to stderr unconditionally, i.e. no more isatty() test (#35). - Converted to "new" lib infrastructure: `show`, `patches`, `diff`, `pick`, `pull`, `rebase`, and `fold`. ### Fixed - `stg show` detects conflicting --applied and --unapplied options. - `stg show --stat` now shows commit headers. - `stg patches --diff` now shows proper diff instead of `b'...'` repr of diff. - `stg diff --range` detects some invalid values (e.g. `-r ..`). - Date parsing is now more portable, only use platform specific `date` as last parsing option. Affects, e.g., `stg refresh --authdate`. - Repaired search path for templates to avoid looking in Python site-packages directory. - Ensure stdout and stderr are flushed. Rarely affected `stg diff`. - `stg repair` will now fail if extra command line arguments are provided. - Bash completions are now generated in a reproducible manner. - `stg edit --diff` on an empty patch no longer crashes. - `stg pick` no longer fails when picked commit has empty message (#39). - `stg rebase` no longer crashes when there are conflicts (#34). - `stg pick` no longer crashes if --name is not provided when picking a regular commit object. - Improved test coverage for: branch, diff, pick, sync, - New tests for: files, patches, fold, series - Portable use of iconv, sort, and sed in tests. - Linting using flake8 and isort. - All Python code now conforms to PEP-8. - Updated test infrastructure from git 2.20. - Parallel tests with coverage (`make -j4 coverage`) now works. - Documentation build is not included in code coverage. - Repaired log end messages when using `STGIT_SUBPROCESS_LOG=debug`. - Renamed "dunder" instance attributes to improve debugging. - Fail faster when patch name has slash ('/') (#24). ## [0.19] 2018-11-05 ### Changed - Python 3 support. StGit supports Python 2.6, 2.7, 3.3, 3.4, 3.5, 3.6, and 3.7. PyPy interpreters are also supported. - Submodules are now ignored when checking if working tree is clean. Submodules are also not included by default when refreshing a patch. - Config booleans are now parsed similarly to git-config. - `contrib/stgit.el` is now licenced with GPLv2. - Add continuous integration (travis-ci) and code coverage (coveralls) support. - Many new test cases were added. ### Fixed - Repair handling of emails with utf-8 bodies containing latin-1 characters. Also correctly decode email headers containing quoted encoded words. - StGit's version is now correct/available in the release archive. ## [0.18] 2017-08-14 ### Added - `commit-msg` hook support for easier integration with Gerrit, allowing a Change-Id line to be inserted in the commit message - `stg mail` improvements for 'Suggested-by:' tag and auto generation of Cc for the cover letter based on all tags in the series - `stg mail` bash completion for the --to, --cc and --bcc options based on the content of the [mail "alias"] section of Git configuration - `stg edit --review` option to add a 'Reviewed-by:' tag - `stg pop --spill` functionality to allow popping a patch from the stack while keeping its modification in the tree ### Changed - Project page details updated (gna.org has been shut down) ### Fixed - Various fixes and test coverage improvements

@Viicos

Allow tzinfo objects for Timezone by @Viicos in #56 add URLs to pyproject.toml by @samuelcolvin in #58 suggested fix on typo by @PelicanQ in #60 Correct misstatement in README by @Zac-HD in #62 Fix IsDigit -> IsDigits by @toriningen in #63 Add Unit type by @tlambert03 in #65 Improve handling of GroupedMetadata (First try) by @cksleigen in #69 Prepare for 0.7.0 release by @adriangb in #70

Zenity 4.0.1 Changes and fixes since 4.0.0: - Bump webkit2gtk requirement in README (Logan Rathbone) - about: The licence is LGPL2.1+, not GPL (Logan Rathbone) - entry: Calculate number of --entry-text's properly (Logan Rathbone) (#75) - test: Add entry test in response to issue #75 (Logan Rathbone) - question: fix option --default-cancel (kvark) - calendar: Fix off-by-one in day (Logan Rathbone) - test: Add test for --calendar (Logan Rathbone) Translation updates: - Artur S0 (ru) - Jürgen Benvenuti (de) - Yuri Chornoivan (uk) Zenity 4.0.0 1st stable release of Zenity based on libadwaita/gtk4. Several command-line options have been deprecated since 3.x. These deprecations will either activate an alternate action, or do nothing. In either case, a deprecation warning will be printed to STDERR. This is to ensure as smooth a transition from scripts targeting Zenity 3.x as possible. TAKE NOTICE that in Zenity 4.4.0, estimated to be released in about twelve (12) months from 4.0.0, these options will be fully removed and scripts using these options may fail to run. So if you are receiving deprecation warnings, kindly take the time to update your scripts accordingly. Changes and bugfixes since 3.99.91 (Logan Rathbone): - Add rudimentary test suite - progress: --auto-close and --percentage=100 don't co-mingle - about: Port to libadwaita; update copyright info - forms: Remove unused variable - forms: Port GtkComboBox to GtkDropDown - tree/colview: Implement missing --hide-header option - progress: OK should be clickable if --percentage=100 at the outset - NEWS: fix typo Translation updates: - Yaron Shahrabani (he) Zenity 3.99.91 2nd release candidate of the upcoming zenity 4.0, based on libadwaita/gtk4. Changes and bugfixes since 3.99.90 (Logan Rathbone): - password: Remove spurious "Warning" heading - password: Only fetch username buffer if username option specified - build: Add implicit fallthrough warnings - password/msg: Handle ZENITY_TIMEOUT to be in line with other libadwaita-based dialogs - filesel: Fix exit statuses for cancel and timeout - Cleanup 'timeout' and make it work properly for all dialogs - util: Maintain default timeout exit status as 5 for backwards compat; various cleanups - text: webkit2gtk-6.0 fixes - msg: Code cleanups - Translation updates: Artur S0 (ru) Zenity 3.99.90 1st release candidate of the upcoming zenity 4.x, based on libadwaita/gtk4. - build: Make building manpage dependent upon manpage option (Guillermo Joandet) - text: Handle long inputs properly (#65) (Lukáš Tyrychtr) - colview: Use g_signal_connect_object (Logan Rathbone) - tree: Fix reading input from a named pipe (#71) (Lukáš Tyrychtr) - tree/colview: Return correct value when filtered using search; code cleanups (Logan Rathbone) - colview: Add missing declaration to header (Logan Rathbone) - build: Make implicit declarations an error (Logan Rathbone) - build: Make zenity4 compile against gtk 4.12 without deprecation warnings (Logan Rathbone) - tree: --checklist or --radiolist with < 2 cols should be an error (Logan Rathbone) - tree: Fix output for non-check/radio multiple selections (Logan Rathbone) - util: Replace gtk_window_destroy() with gtk_application_remove_window() (#72) - Translation updates: Daniel Rusek (cs) Luming Zh (zh_CN) Sabri Ünal (tr) Yuri Chornoivan (uk) Zenity 3.99.2 3rd beta release of the upcoming zenity 4.x, based on libadwaita/gtk4. - Minor code cleanups (Logan Rathbone) - option: Don't try to access stack-based argv within a glib2 mainloop (likely fixes RH bugs 2216049 and 2214000) (Logan Rathbone) - option: Allow --version and --help to work without a display server running (Logan Rathbone) - data: Reinstate help2man manpage autogeneration (Logan Rathbone) - build: Make manpage/help2man requirement more explicit (Logan Rathbone) - ci: Add help2man as 'build_fedora' target build dep (Logan Rathbone) - Translation updates: Anders Jonsson (sv) Asier Sarasua Garmendia (eu) Balázs Úr (hu) Boyuan Yang (zh_CN) Jordi Mas i Hernandez (ca) Kukuh Syafaat (id) Martin (sl) Sabri Ünal (tr) Sergej A (ru) Zenity 3.99.1 2nd beta release of the upcoming zenity 4.x, based on libadwaita/gtk4. - question: do not hardcode "Yes" and "No" buttons (kelvinvoon) - Set the default response explicitly for all AdwMessageDialog's (Lukáš Tyrychtr) - column-view: Widget should go directly in GtkScrolledWindow (Logan Rathbone) - msg: Make --ok-label and --cancel-label work for --question dialogs (Logan Rathbone) - Add separate case for ZENITY_ESC; don't print junk or crash with extra buttons (Logan Rathbone) - Fix --extra-button and delete events for legacy (non-libadwaita) dialogs (Logan Rathbone) - filesel: Fix --filename for zenity 4.x (Logan Rathbone) - Translation updates: Balázs Úr (hu) Ekaterine Papava (ka) Piotr Drąg (pl) Yuri Chornoivan (uk) Zenity 3.99.0 1st beta release of the upcoming zenity 4.x, based on libadwaita/gtk4. I would consider this release feature-complete for 4.0, but there are still some bug reports flowing in, particularly for STDIN-related operations, that need some further tweaking before a stable 4.0 release. - option: Add various non-fatal deprecation warnings that were previously missing, and fix a misleading deprecation message for `--window-icon` (Logan Rathbone) - main: Add G_APPLICATION_FLAGS_NON_UNIQUE to GApplication flags (fixes #58) (Logan Rathbone) - util: remove fatal assert on exit if window invalid GtkWindow (Logan Rathbone) - progress: Cleanup unnecessary static objects and remove spurious builder unref (Logan Rathbone) - util: Ignore superfluous quit requests (Logan Rathbone) - util: Remove superfluous GtkWindow cast check (Logan Rathbone) - data: Manpage generation changes; don't automatically generate the manpage from help2man for now (this will preferably be reinstated post-4.0 once the issues are worked out) (Logan Rathbone) - a11y: Label the widgets in a forms UI properly (Lukáš Tyrychtr) - Translation updates: Anders Jonsson (sv) Ekaterine Papava (ka) Jordi Mas i Hernandez (ca) Kukuh Syafaat (id) Piotr Drąg (pl) Sabri Ünal (tr) Sergej A (ru) Yuri Chornoivan (uk) Zenity 3.92.0 3rd alpha release of the upcoming zenity 4.x, based on libadwaita/gtk4. - progress: don't update responses that aren't there (see: !25 and https://bugzilla.redhat.com/show_bug.cgi?id=2177287) (Adam Williamson) - Set dialog 'heading', not 'title' for the --title option (see: !26) (Adam Williamson) - tree: fix handling of multi-row stdin input (#54) (Adam Williamson) - tree-column-view: don't steal children (see: !28) (Adam Williamson) - Port to webkitgtk 6.0 (Adam Williamson) - webkit: Fix leak by removing unnecessary ref sink (Logan Rathbone) - option: Add non-fatal deprecation warning for --confirm-overwrite (#55) (Logan Rathbone) - help: Fix typo in Basque help translation (Andre Klapper) - Translation updates: Andika Triwidada (id) Asier Sarasua Garmendia (eu) Balázs Úr (hu) Ekaterine Papava (ka) Piotr Drąg (pl) Sergej A (ru) Yuri Chornoivan (uk) Zenity 3.91.0 - tree: Port to GtkColumnView (Logan Rathbone) - desktop file: Remove spurious translation comment (Logan Rathbone) - i18n: rename POTFILES to POTFILES.in (Piotr Drąg) - help: Fix invalid markup in German help translation (Andre Klapper) - help: Freedesktop.org spec fixes (Anders Jonsson) - Translation updates: Anders Jonsson (sv) Yuri Chornoivan (uk) Jürgen Benvenuti (de) Ekaterine Papava (ka) Kukuh Syafaat (id) Martin (sl) Aurimas Černius (lt) Aleksandr Melman (ru) Sergej A (ru) Sabri Ünal (tr) Anders Jonsson (sv) Zenity 3.90.0 - Initial alpha release based on libadwaita and GTK4 (Logan Rathbone) Zenity 3.44.0 - scale: set a page increment so mouse wheel can be used on widget (Hg) - build: Use GNOME module post_install() (Matt Turner) - docs: Fix incorrect markup (Andre Klapper) - build: Replace deprecated functions (Logan Rathbone) - Translation updates: Alexander Shopov (bg) Jiri Grönroos (fi) Nart Tlisha (ab) Sabri Ünal (tr) Sergej A (ru) Zenity 3.43.0 - Documentation updates (Logan Rathbone) - Bump WebkitGTK dependency to API 4.1, for GNOME 43 (Logan Rathbone) - Translation updates: Zurab Kargareteli (ka) Zenity 3.42.1 - scale: Make OK button default (allows pressing Enter to accept selected value) (hydrargyrum) - Fix maximum width of message dialogs to 60 characters, and make message dialogs non-resizable (fixes regression from 3b64d05e) (David King) Zenity 3.42.0 - tree: Clicking row checks radio/checkboxes (Logan Rathbone) - Fix search column selection with --imagelist (Janne Pulkkinen) - Translation updates: Asier Sarasua Garmendia (eu) Efstathios Iosifidis (el) Goran Vidović (hr) Quentin PAGÈS (oc) Alan Mortensen (da) Daniel Mustieles (es)

From Iris via pkgsrc-wip. Changelog from 2.9.27 to 2.9.28: 8f4e86ca Version 2.9.28 c6c3823b Added Sven Höxter to aboutDialog for his patches cba17cc6 Feature: link app icon as a mimetype icon for the hicolor default theme (#109) 01aae901 Fix: do not install manpage in doc dir (#107) 201ca770 Bugfix: Open french documention if required 97e0e837 Spelling fix: remove duplicate word (#108) 1a3d001d Spelling fixes (#105) 7eb79dde Desktop file improvements (#106) 92a762ed Merge branch 'release' of github.com:insilmaril/vym into release d9d7b12a Updated project name 5248d9a0 Fixed typo in version number 0e87888d Updated year in README.md acdf0677 Updated release notes -- Release notes VYM - View Your Mind The lists below shows differences between vym 2.8.0 and the latest 2.9.x version. Feel free to report any bugs or feature requests on https://github.com/insilmaril/vym/issues Thanks for using vym! Uwe Drechsel - May 2024 Version 2.9.27 Bugfixes Bugfix: Markdown improvements by Markus Seilnacht Bugfix: Allow saving of readonly maps Bugfix: Use vymBaseDir when setting up libreoffice export Bugfix: Resetting task delta prio not limited to visible tasks Version 2.9.26 Features Feature: #87 Enable Crtl modifier for macros triggered by function keys. Feature: Set last export type to "Update" after successfully "Creating" Confluence page Feature: Updated status bar messages when loading/saving maps Feature: #91 Update Italian translation Feature: Dropped URLs are truncated at start of parameters Bugfixes Bugfix: Minor typo in German translation Bugfix: Minor typo in Confluence settings dialog Bugfix: Pasted text URLs in a heading no longer create URL in branch Bugfix: #90 Disable BSP indexing to avoid crashes Bugfix: #88 Improved ASCII export Changes Change: Removed or changed shortcuts with ALT Version 2.9.22 Features Feature: Support multiple Jira instances with specific authentication methods Feature: Floppy disk icon for unsaved maps better visible, if active Feature: Upload images also for new Confluence pages Feature: New commands to control visuals of selection box Feature: added script to set colors of selection box for dark theme: demos/scripts/setSelectionBoxDarkTheme.vys Feature: Center on selection and fit to view with Key_Period + Key_Shift Feature: Delete vymLink with Ctrl-Shift click Feature: Scale pasted images to 300px width Feature: Define pen color, width and brush for selection box setSelectionPenColor setSelectionPenWidth setSelectionBrushColor Feature: Option to 'never' use dark theme Feature: Support Personal Access Tokens for Jira and Confluence Feature: Improved animated centering on selection (Shortcut: Key_Period) Feature: For multiple selected items show count in status line Feature: Scale images on the fly This allows to paste and shrink images (Ctrl + "-"), but when zooming in the images are not pixelized, but still have original resolution. Storing e.g. screenshots is more efficient this way. Bugfixes Bugfix: Creating Confluence page without attachments Bugfix: Icon and status of view icons Bugfix: disabled all icons when no map is available. Bugfix: Fixed layout of dialog for Confluence export Bugfix: Improved adding new branches at border of current scene Bugfix: Urls and VymLinks shown again in statusBar Bugfix: Wrong positon of selection box of xlinks control points, resulting in crazy scrolling, when control point is selected. Bugfix: #79 quell linking error (#79) Bugfix: Set selection background color in TreeEditor Bugfix: Also center on selected branch when using HeadingEditor while editing a heading Bugfix: Save colors of headings Bugfix: Editing long plainText headings might open HeadingEditor Bugfix: #65 and #71 Colors in NoteEditor with RichText Bugfix: #76 Editing heading of zoomed in view causes panning Bugfix: When zooming in/out using mouse wheel don't change rotation Bugfix: Background colors in HeadingEditor Bugfix: #40 Editing PlainText headings with linebreaks Bugfix: #75 TreeEditor and Linebreaks in headings Bugfix: #73 Default maps should not have word default in MapCenter Bugfix: #72 Improved support to load new default maps Bugfix: #74 HTML export uses word wrap for PlainText notes Bugfix: Update HeadingEditor for RichText heading, when frame background changes Bugfix: Update color and heading of HeadingEditor Bugfix: #70 HeadingEditor doesn't use map background when switching on RichText mode Bugfix: #70 settings override macroPath, if local option is used "-l" Bugfix: #68 HeadingEditor doesn't update after in MapEditor Bugfix: Consider zoomFactor after load when scrolling to selection Bugfix: Set color and width of legacy xlink Changes Change: Use Control modifier instead of Shift to only move MapCenter Change: Compatibility with 2.9.514: Some elements can be read, even if vym Version 2.9.2 Bugfixes Bugfix: #64 Read notes correctly from (very old) maps Version 2.9.0 This version provides bugfixes and some new features. The biggest and most visible changes are dark theme support and an extended color bar to select colors. The platform support has been improved, native Mac version is available (again) and also binaries for various Linux flavors. See the README.md for details Features Feature: Dark theme Feature: Increase max. number of recent maps to 20 Feature: Reset priority delta for visible tasks (all maps) Feature: Toggle target for multiple selected items Feature: Copying and pasting between vym instances and pasting images Feature: Added desktop files for easier packaging accross Linux distros Feature: Larger font size for editing headings on WIndows Feature: Scripting commands to edit heading and get depth of branch Feature: Introduced colors toolbar (#39) Feature: Use expand macro in Confluence export for scrolled branches Feature: Move branches diagonally with Ctrl-PageUp/Down Feature: Enable openSSL on Windows Feature: Add information from JIRA as attributes Feature: Toggle flag for multiselection Feature: Confluence and JIRA support Feature: Cycle tasks by clicking status in taskeditor Feature: Cursor up/down + Shift-key can be used to select multiple branches Feature: Updated translations for Greek and German Bugfixes Bugfix: #52 Saving part of map overwrites original map Bugfix: #48 lockfile cannot be renamed on Windows Bugfix: Read map attributes for default map Bugfix: Create translation files during build Bugfix: German translation to show keyboard macros in help menu Bugfix: Set URL when getting Jira data Bugfix: Use mapname and correct postfic when exporting Bugfix: #25 treeEditor opens when pasting images Bugfix: less compiler warnings related to deprecated Qt Bugfix: Restore state of treeEditor and slideEditor from settings in map after load Bugfix: Don't set URL for Jira ticket, if Jira pattern is not known Bugfix: Umlauts when exporting to a Confluence page Bugfix: undo/redo when toggling task via F12-macro Bugfix: Allow selecting text while editing a heading in QLineEdit Bugfix: Remove invalid QModelIndex warning when relinking images from mainbranch to center Bugfix: Avoid jumping of view when adding branches to center" Bugfix: Reset current text format when switching from RichText to PlainText Bugfix: Unused duplicate branchPropertyEditor dockwidget removed Bugfix: Setting for Windows data-root directory (#36) Bugfix: vymBaseDir improvements (#34) Bugfix: Don't trigger reposition when selection changes Bugfix: Relink branches and keep parent Bugfix: set CMAKE_INSTALL_DATAROOTDIR (#24) Bugfix: #31 Confluence export missing siblinigs of hidden first branch Bugfix: #26 tabname for save but unchanged maps does not update Bugfix: Getting user info from Confluence Bugfix: Freemind import Bugfix: exportLast of Markdown export Bugfix: piping plaintext mails from mutt into note Bugfix: Cycling tasks in taskeditor Bugfix: Links to images (color and hiding) Bugfix: Don't give up on unknown tags when importing Freeplane Bugfix: Remove unnecessary columns from taskeditor Bugfix: #14 Packaging for openSUSE: Set vymBaseDir correctly Bugfix: Trash button in NoteEditor Bugfix: vym crashed, when cursor left/right was used and multiple branches were selected Bugfix: Copy to new map Bugfix: crash while checking an empty directory (#9) Changes Changed: Settings for JIRA and Confluence Changed: Moved functionality of recover session into restore ression Changed: Sleeping tasks keep their priority (Before prio was lowered and sleeping tasks dropped to bottom.) Changed: Removed unused Bugzilla script Changed: Builds now use cmake Release notes View Your Mind - vym 2.8.0 This version provides bugfixes and some new features. The biggest and most visible change are the (mostly) reworked and now scalable icons in mind maps. At least on Linux you now can also connect to JIRA and Confluence and retrieve data, but also create or update Confluence pages. A brandnew feature is the (experimental) support to import and export Firefox bookmarks - very handy to sort bigger bookmark collections. Scripting still is considered as Technology Preview - APIs still might change in upcoming versions, when vym will be based on Qt6. Just check out the keyboard macros for F01 to F24 or also the example scripts. The lists below list differences between vym 2.7.0 and 2.8.0. Feel free to report any bugs or feature requests on https://github.com/insilmaril/vym/issues Thanks for using vym! Uwe Drechsel - April 2021 Notes: Some function keys have changed, e.g. Shift-F8 for toggling frames to include children File format has changed within the vym files CDATA is no longer used, but <vymtext> and <heading> use attributes now for texts. Vym versions below 2.7.566 cannot read newer maps Removed support for Bugzilla Removed support for SUSE FATE tool Removed dependency on 7z on Windows platform Removed setting to edit branch after creating Various optimizations, e.g. when updating map when NoteEditor changes Removed unused windows code Updated code to Qt 5.14 Reorganized source code, moved it to github and applied coding style using clang-format Detailed list of features Feature: Improved presentation mode and added projector icon Feature: Added recover option (--recover) Feature: Allow cursor positioning during edit of heading Feature: Allow middle mouse for pasting while editing heading Feature: Alternatively pan view using middle mouse button Feature: Basic editing of tasks in TaskEditor Feature: BranchPropertyEditor show sleep time Feature: Initial Confluence support (on Linux) Create new Confluence pages Get Confluence username and use in export (experimental) Native Confluence Agent to retrieve page name Feature: Dialog to enter credentials for Confluence Feature: Drag drop in TaskEditor for repriorization Feature: Editing in TreeEditor Feature: Hide less popular standard flags if not used in a map (Present, rose, phone, clock) Feature: Icons for filters in taskeditor Feature: Improved editing in TaskEditor Feature: Improved handling of modifiers Feature: Improved winter mode Feature: Import and export of Firefox bookmarks (experimental) Feature: Internal testsuite prepared Feature: Load default map instead of creating it Feature: More verbose status message for toggling frames when using function keys Feature: Most of the flags have been reworked and are scalable vector graphics now Feature: Repeat last command in map using F8 Feature: Save as default map Feature: Select images using cursor left/right in MapEditor Feature: Set sleep time weeks with 'w' Feature: Setting for margin when scrolling to selection Feature: Shortcut Shift-G to goto linked map Feature: Show Delta Priority in TaskEditor Feature: Show Task modification times Feature: Show file location in properties dialog Feature: Show flags in taskeditor Bugfixes Bugfix: Collapse selected branch using "<"-key Bugfix: Better placement of flags toolbars for new user Bugfix: Comment in map properties no longer saved as HTML Bugfix: Compiler warnings Bugfix: Correctly read task modification time from file Bugfix: Crash when exporting HTML Bugfix: Disable user flags toolbar when image is selected Bugfix: Don't save definitions of unused userflags Bugfix: Edit and actually use the correct path for macros Bugfix: Editing of branch heading in heading editor Bugfix: Editor states related to multiple selection Bugfix: Emtpy lines for hidden branches in ASCII export Bugfix: Flag to search notes in FindResultWidget Bugfix: For non-sleeping tasks display "-" in table as sleep time Bugfix: Function key F4 not executing related macro Bugfix: HTML export for svg- and userflags Bugfix: History of changing RichText notes in editor Bugfix: History of editing notes and headings Bugfix: Inactive NoteEditor in some cases Bugfix: Modifier for modModes is SHIFT, not CTRL. Bugfix: Opening default map, but without existing file Bugfix: Reenable context menu in TaskEditor Bugfix: Removal of temporary files on Windows Bugfix: Repeat toggling target with F8 Bugfix: Ruby testsuite Bugfix: Select new tab after creating new map Bugfix: Shortcuts for formats in TextEditor Bugfix: Tests related to changing (named) flags Bugfix: Undo of setting task to sleep Bugfix: Undo/redo toggling flag Bugfix: Update HeadingEditor after reselect and undo/redo Bugfix: Update confluence script Bugfix: Waking up of sleeping tasks is visible again Bugfix: Warning when saving uncompressed map Bugfix: application to open external links Bugfix: libpng warning Bugfix: svg flags not displaying correctly Bugfix: toggling target was not saved Bugfix: use most important shortcuts also in TreeEditor

0.10 (2022-03-26) * nevesenin fixed an issue with long filename handling. Merged as PR #40. 0.11 (2022-12-31) * symlink support is complete. Merged as PR #42, rebased and built on top of PR #12 by fetep. * kymmt90 fixed a documentation error on Minitar.pack in PR #43. * This version is a soft-deprecation of all versions before Ruby 2.7, as they will no longer be tested in CI. 0.12 (2024-08-06) * Properly handle very long GNU filenames, resolving #46. * Handle very long GNU filenames that are 512 or more bytes, resolving #45. Originally implemented in #47 by Vijay, but accidentally closed. 0.12.1 (2024-08-21) * Reverted @adbbb9b596 to restore compatibility with Ruby < 2.0. Resolves [#63][#63] reported by Robert Schulze. 1.0.0 (2024-08-07) Breaking Changes: * Minimum Ruby version is 3.1. * The Archive::Tar::Minitar namespace has been completely removed and Minitar is a class instead of a module. Enhancements: * Added Minitar.pack_as_file, originally proposed by John Prince back in 2011 #7. 1.0.1 (2024-08-08) Bugfix: * Resolve a constant lookup issue. The accepted fix has been provided by Aram Price in #58. 1.0.2 (2024-08-23) Bugfix: * Minitar 1.0.1 was released with an unchanged gemspec. Reported by Debashish Biswas in #65.

@weshinsley

# zip 2.3.1 * The zip shared library now hides its symbols (on platforms that support this), to avoid name clashes with other libraries (#98). # zip 2.3.0 * zip now handles large zip files on Windows (#65, #75, #79, @weshinsley). * zip now behaves better for absolute paths in mirror mode, and when the paths contain a `:` character (#69, #70). * `zip::unzip()` now uses the process's umask value (see `umask(2)`) on Unix if the zip file does not contain Unix permissions (#67). * Fix segmentation fault when zip file can't be created (#91, @zeehio) * Fix delayed evaluation error on zipfile when `zip::zip()` is used (#92, @zeehio) * New `deflate()` and `inflate()` functions to compress and uncompress GZIP streams in memory.

bartoszkosiorek mentioned this pull request Jun 9, 2020

lang/gcc5: Refine the condition to enable multilib #62

Closed

krytarowski suggested changes Jun 9, 2020

View reviewed changes

mk/platform/Linux.mk Outdated Show resolved Hide resolved

lang/gcc48,49,5,6: Refine the condition to enable multilib

0af60b1

It fixes the build issue on Ubuntu 20.04

netbsd-srcmastr closed this in e217a0d Apr 2, 2021

netbsd-srcmastr pushed a commit that referenced this pull request Jul 8, 2022

py-acoustid: update to 1.2.2.

e630a96

1.2.2 Fix #65: new crash when missing `meta` parameter Older changes not found.

netbsd-srcmastr pushed a commit that referenced this pull request Aug 25, 2022

xfce4-tumbler: update to 4.16.1

e555bf7

Change log: 4.16.1 (2022-08-11) ====== - gst-thumbnailer: Add mime type check (Fixes #65) - desktop-thumbnailer: Guard against null path - Fix typo in gthread version (!14)

netbsd-srcmastr pushed a commit that referenced this pull request Aug 7, 2023

shells/oh-my-posh: update to 18.3.1

37d5982

Bug Fixes - pwsh: remove hack that solves a pwsh bug (0afa088), closes #65

netbsd-srcmastr pushed a commit that referenced this pull request Aug 9, 2023

shells/oh-my-posh: update to 18.3.3

02f5fe5

Bug Fixes - pwsh: patch PowerShell color bleed (aa51cd6), closes #65

netbsd-srcmastr pushed a commit that referenced this pull request Feb 19, 2024

security/ruby-rex-socket: update to 0.1.56

849eca1

0.1.56 (2024-02-14) * Land #65, Add .is_name? And Strengthen .is_ip_addr? Validation

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

lang/gcc48,49,5,6: Refine the condition to enable multilib #65

lang/gcc48,49,5,6: Refine the condition to enable multilib #65

bartoszkosiorek commented Jun 9, 2020

krytarowski commented Jun 9, 2020

krytarowski commented Jun 9, 2020

krytarowski commented Jun 9, 2020

bartoszkosiorek commented Nov 25, 2020

krytarowski commented Nov 25, 2020

lang/gcc48,49,5,6: Refine the condition to enable multilib #65

lang/gcc48,49,5,6: Refine the condition to enable multilib #65

Conversation

bartoszkosiorek commented Jun 9, 2020

krytarowski commented Jun 9, 2020

krytarowski commented Jun 9, 2020

krytarowski commented Jun 9, 2020

bartoszkosiorek commented Nov 25, 2020

krytarowski commented Nov 25, 2020