2.9″ EL029GSWRN
Currently not supported by OpenEPaperLink, but work is in progress.
- TI CC2630 ARM Cortex-M3 core, 128KB flash, 8KB SRAM, 20KB Ultra Low-Leakage SRAM, 24MHZ clock*, 802.15.4 2.4Ghz radio
- 2.9” ePaper display
- SPI EEPROM
- Dedicated wake-IC
- NXP NFC controller (I2C)
- 3x CR2032 Coin cell
| Tag Information | Note | |
|---|---|---|
| Model | EL029GSWRN | |
| Options | NFC | |
| FCC ID | 2AFWN-EL029GS |
To program or read-out this tag you have two options:
- Enter the bootloader and communicate with the IC through UART. I'm having problems with this option, even though the MCU seams to run the bootloader, it starts sending garbage in UART as soon as I power it on with the EPD_RST pin shorted to ground (I assume that it is the configured pin to trigger the bootloader)
- Or with a cJTAG compliant programmer/debugger . I don't have one yet, because those are still pretty rare and as a result pretty expensive (the cheapest one and so the most useless one is 30$ from TI, quite something for a student;) )
As this tag is quite rare if you have any updates or you did any investigations on your-self please contact me by mail, any support will be greatly appreciated: qwer4334@protonmail.com