From 9349e0e378aa79b3d2208f508de43789e3a41bac Mon Sep 17 00:00:00 2001 From: Bonnie Jonkman Date: Wed, 28 Jun 2023 16:27:23 -0600 Subject: [PATCH] TurbSim documentation The TurbSim documentation incorrectly specified that the wind direction column in the user profiles was the meteorological wind direction. However, it was actually implemented as an angle, counter-clockwise from above. --- docs/OtherSupporting/TurbSim/Corrections.md | 2 +- docs/source/user/turbsim/examples/TurbSim_User.profiles | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/OtherSupporting/TurbSim/Corrections.md b/docs/OtherSupporting/TurbSim/Corrections.md index a6b47b80d9..8e735b0800 100644 --- a/docs/OtherSupporting/TurbSim/Corrections.md +++ b/docs/OtherSupporting/TurbSim/Corrections.md @@ -2,4 +2,4 @@ ## p. 34: Input file for User-Defined Profiles The User-Defined profiles listed in the "Profiles" section contain horizontal angles, not wind direction, so it should say - `3. Horizontal wind angle (degrees, measured clockwise from above)` \ No newline at end of file + `3. Horizontal wind angle (degrees, measured counter-clockwise from above)` \ No newline at end of file diff --git a/docs/source/user/turbsim/examples/TurbSim_User.profiles b/docs/source/user/turbsim/examples/TurbSim_User.profiles index f1bc0550a6..63af934660 100644 --- a/docs/source/user/turbsim/examples/TurbSim_User.profiles +++ b/docs/source/user/turbsim/examples/TurbSim_User.profiles @@ -7,7 +7,7 @@ Made up profiles 0.534 StdScale3 - w-component scaling factor for the input standard deviation ----------------------------------------------------------------------------------- Height Wind Speed Wind --Angle-- Standard Deviation Length Scale - (m) (m/s) (deg, clockwise ) (m/s) (m) + (m) (m/s) (deg, cntr-clockwise ) (m/s) (m) ----------------------------------------------------------------------------------- 15.0 3 00 .100 3 25.0 4 00 .200 4