From 9512c6fec829b97ea50c802bee0116a3f9d44225 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 12 Feb 2014 15:45:57 +0200
Subject: [PATCH 01/45] ARM: dts: fix omap3 dss clock handle names

The DSS fclk and iclk handles are named differently on OMAP3430 ES1 than
on later OMAP revisions. The ES1 has handles 'dss1_alwon_fck_3430es1'
and 'dss_ick_3430es1', whereas later revisions have similar names but
ending with 'es2'.

This means we don't have one clock handle to which we could refer to
when defining the DSS clocks.

However, as the namespaces are separate for ES1 and ES2+ OMAPs, we can
just rename the handles to 'dss1_alwon_fck' and 'dss_ick' for both ES1
and ES2+, removing the issue.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3430es1-clocks.dtsi                   | 6 +++---
 .../boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi    | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 6f31954636a1ea..4c22f3a7f813a7 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -152,7 +152,7 @@
 		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
 	};
 
-	dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
+	dss1_alwon_fck: dss1_alwon_fck_3430es1 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
@@ -161,7 +161,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_ick_3430es1: dss_ick_3430es1 {
+	dss_ick: dss_ick_3430es1 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&l4_ick>;
@@ -184,7 +184,7 @@
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
 		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck_3430es1>, <&dss_ick_3430es1>;
+			 <&dss1_alwon_fck>, <&dss_ick>;
 	};
 
 	d2d_clkdm: d2d_clkdm {
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index af9ae5346bf2e9..080fb3f4e429bd 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -160,7 +160,7 @@
 		ti,bit-shift = <30>;
 	};
 
-	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
+	dss1_alwon_fck: dss1_alwon_fck_3430es2 {
 		#clock-cells = <0>;
 		compatible = "ti,dss-gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
@@ -169,7 +169,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_ick_3430es2: dss_ick_3430es2 {
+	dss_ick: dss_ick_3430es2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dss-interface-clock";
 		clocks = <&l4_ick>;
@@ -216,7 +216,7 @@
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
 		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+			 <&dss1_alwon_fck>, <&dss_ick>;
 	};
 
 	core_l4_clkdm: core_l4_clkdm {

From 64a900ff4727c93e076e814c917f68c225c9b630 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 13 Feb 2014 10:58:32 +0200
Subject: [PATCH 02/45] ARM: dts: fix DPLL4 x2 clkouts on 3630

OMAP3630 DPLL4 is different than on OMAP3430, in that it doesn't have
the x2 multiplier for its outputs. This is not currently reflected in
the clock DT data.

Fix the issue by setting the clock multiplier to 1 (instead of 2) for the
DPLL4 output clocks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap36xx-clocks.dtsi | 20 ++++++++++++++++++++
 arch/arm/boot/dts/omap36xx.dtsi        |  2 +-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 2fcf253b677c05..0b2df76b9d3814 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -70,6 +70,26 @@
 	};
 };
 
+&dpll4_m2x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m3x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m4x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m5x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m6x2_mul_ck {
+	clock-mult = <1>;
+};
+
 &cm_clockdomains {
 	dpll4_clkdm: dpll4_clkdm {
 		compatible = "ti,clockdomain";
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index ba077cd95e4e2a..b6903939d0ee96 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -72,7 +72,7 @@
 	};
 };
 
-/include/ "omap36xx-clocks.dtsi"
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-clocks.dtsi"

From c368dbe2de0a7fec2488eb7e4dcccfe25714ed2b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 13 Feb 2014 11:14:58 +0200
Subject: [PATCH 03/45] ARM: dts: use ti,fixed-factor-clock for
 dpll4_m4x2_mul_ck

We need to use set-rate-parent for dpll4_m4 clock path, so use the
ti,fixed-factor-clock version which supports set-rate-parent property.

The set-rate-parent flag itself is set in the following patch, this one
just changes the clock driver to ti,fixed-factor-clock without any other
changes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap36xx-clocks.dtsi | 2 +-
 arch/arm/boot/dts/omap3xxx-clocks.dtsi | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 0b2df76b9d3814..6b5280d04a0ed2 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -79,7 +79,7 @@
 };
 
 &dpll4_m4x2_mul_ck {
-	clock-mult = <1>;
+	ti,clock-mult = <1>;
 };
 
 &dpll4_m5x2_mul_ck {
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index cb04d4b37e7f0f..df3c699a189353 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -425,10 +425,10 @@
 
 	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll4_m4_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
 	};
 
 	dpll4_m4x2_ck: dpll4_m4x2_ck {

From 1d3361f6229e210f9924f74510708f2e2c08c109 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 13 Feb 2014 11:15:06 +0200
Subject: [PATCH 04/45] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path

Set 'ti,set-rate-parent' property for clocks in the dpll4_m4 clock
path, which is used for DSS functional clock. This fixes DSS driver's
clock rate configuration, which needs the rate to be propagated properly
to the divider node (dpll4_m4_ck).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3xxx-clocks.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index df3c699a189353..12be2b35dae9a2 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -429,6 +429,7 @@
 		clocks = <&dpll4_m4_ck>;
 		ti,clock-mult = <2>;
 		ti,clock-div = <1>;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m4x2_ck: dpll4_m4x2_ck {
@@ -438,6 +439,7 @@
 		ti,bit-shift = <0x1d>;
 		reg = <0x0d00>;
 		ti,set-bit-to-disable;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m5_ck: dpll4_m5_ck {

From 0f3b1e4415be85ba35a32d371cd05df44ba522e0 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 18 Dec 2013 10:22:07 +0200
Subject: [PATCH 05/45] ARM: omap2.dtsi: add omapdss information

Add DT data for OMAP2 display subsystem, which contains the following
blocks:

dss - the wrapper/glue for the display modules
dispc - display controller
rfbi - MIPI DBI encoder
venc - analog TV encoder

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap2.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 5377ddf83bf8f9..22f35ea142c199 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -271,5 +271,36 @@
 			ti,hwmods = "timer12";
 			ti,timer-pwm;
 		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap2-dss";
+			reg = <0x48050000 0x400>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap2-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap2-rfbi";
+				reg = <0x48050800 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap2-venc";
+				reg = <0x48050c00 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+			};
+		};
 	};
 };

From b8a7e42b686a3b101818c5b5e0eaf70521324367 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 19 Mar 2013 11:38:13 +0200
Subject: [PATCH 06/45] ARM: omap3.dtsi: add omapdss information

Add DT data for OMAP3 display subsystem, which contains the following
blocks:

dss - the wrapper/glue for the display modules
dispc - display controller
dsi - MIPI DSI encoder
rfbi - MIPI DBI encoder
venc - analog TV encoder

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3.dtsi    | 52 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap36xx.dtsi |  6 ++++
 2 files changed, 58 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a089e6e004577b..3d05eff67e25ea 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -688,6 +688,58 @@
 			num-eps = <16>;
 			ram-bits = <12>;
 		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x48050000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss1_alwon_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss1_alwon_fck>;
+				clock-names = "fck";
+			};
+
+			dsi: encoder@4804fc00 {
+				compatible = "ti,omap3-dsi";
+				reg = <0x4804fc00 0x200>,
+				      <0x4804fe00 0x40>,
+				      <0x4804ff00 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <25>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x48050800 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss1_alwon_fck>, <&dss_ick>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap3-venc";
+				reg = <0x48050c00 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_fck>;
+				clock-names = "fck";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index b6903939d0ee96..22cf4647087edc 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -72,6 +72,12 @@
 	};
 };
 
+/* OMAP3630 needs dss_96m_fck for VENC */
+&venc {
+	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
+	clock-names = "fck", "tv_dac_clk";
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"

From cfe86fcf2d0079f03ba3ad9360b86d76b9297b3b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Aug 2012 15:34:50 +0300
Subject: [PATCH 07/45] ARM: omap4.dtsi: add omapdss information

Add DT data for OMAP4 display subsystem, which contains the following
blocks:

dss - the wrapper/glue for the display modules
dispc - display controller
dsi - MIPI DSI encoder (two independent modules)
rfbi - MIPI DBI encoder
venc - analog TV encoder
hdmi - HDMI encoder

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4.dtsi | 79 ++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3dfec86c1dc948..4db99db0bffaa2 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -817,6 +817,85 @@
 
 			status = "disabled";
 		};
+
+		dss: dss@58000000 {
+			compatible = "ti,omap4-dss";
+			reg = <0x58000000 0x80>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss_dss_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,omap4-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: encoder@58002000  {
+				compatible = "ti,omap4-rfbi";
+				reg = <0x58002000 0x1000>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss_dss_clk>, <&dss_fck>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@58003000 {
+				compatible = "ti,omap4-venc";
+				reg = <0x58003000 0x1000>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_clk>;
+				clock-names = "fck";
+			};
+
+			dsi1: encoder@58004000 {
+				compatible = "ti,omap4-dsi";
+				reg = <0x58004000 0x200>,
+				      <0x58004200 0x40>,
+				      <0x58004300 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			dsi2: encoder@58005000 {
+				compatible = "ti,omap4-dsi";
+				reg = <0x58005000 0x200>,
+				      <0x58005200 0x40>,
+				      <0x58005300 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi2";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			hdmi: encoder@58006000 {
+				compatible = "ti,omap4-hdmi";
+				reg = <0x58006000 0x200>,
+				      <0x58006200 0x100>,
+				      <0x58006300 0x100>,
+				      <0x58006400 0x1000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+		};
 	};
 };
 

From 661637ca2e18893b06f316dcb7907c56ea8d2904 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 20 Aug 2012 17:07:23 +0300
Subject: [PATCH 08/45] ARM: omap4-panda.dts: add display information

Add DT data for OMAP4 Pandaboard. The board has the following displays:

dvi: uses TFP410 encoder to convert DPI to DVI
hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4-panda-common.dtsi | 115 ++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index cbc45cfc44e991..d2c45bfaaa2c52 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -16,6 +16,11 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,6 +105,89 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap4_pmx_core {
@@ -406,3 +494,30 @@
 &usbhsehci {
 	phys = <&hsusb1_phy>;
 };
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};

From dcdf407b9ddceb1383da14c9a095e0b07a85b014 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 18 Mar 2013 15:50:25 +0200
Subject: [PATCH 09/45] ARM: OMAP2+: add omapdss_init_of()

The OMAP display architecture requires a bunch of platform devices which
are not created via .dts (for now). We also need to pass a few function
pointers and the DSS hardware version from the arch code to omapdss
driver.

This patch adds omapdss_init_of() function, called from board-generic at
init time, which handles those tasks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-generic.c |   2 +
 arch/arm/mach-omap2/common.h        |   2 +
 arch/arm/mach-omap2/display.c       | 105 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/display.h       |   3 +
 arch/arm/mach-omap2/dss-common.c    |  18 +++++
 5 files changed, 130 insertions(+)

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 8e3daa11602b30..fcb7f5c271c95d 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -36,6 +36,8 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 static void __init omap_generic_init(void)
 {
 	pdata_quirks_init(omap_dt_match_table);
+
+	omapdss_init_of();
 }
 
 #ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index a6aae300542cd8..1864282dbddf93 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -315,5 +315,7 @@ extern int omap_dss_reset(struct omap_hwmod *);
 /* SoC specific clock initializer */
 int omap_clk_init(void);
 
+int __init omapdss_init_of(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 4cf165502b35cf..a83ada38cae215 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -552,3 +554,106 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	return r;
 }
+
+struct device_node * __init omapdss_find_dss_of_node(void)
+{
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss");
+	if (node)
+		return node;
+
+	return NULL;
+}
+
+int __init omapdss_init_of(void)
+{
+	int r;
+	enum omapdss_version ver;
+	struct device_node *node;
+	struct platform_device *pdev;
+
+	static struct omap_dss_board_info board_data = {
+		.dsi_enable_pads = omap_dsi_enable_pads,
+		.dsi_disable_pads = omap_dsi_disable_pads,
+		.get_context_loss_count = omap_pm_get_dev_context_loss_count,
+		.set_min_bus_tput = omap_dss_set_min_bus_tput,
+	};
+
+	/* only create dss helper devices if dss is enabled in the .dts */
+
+	node = omapdss_find_dss_of_node();
+	if (!node)
+		return 0;
+
+	if (!of_device_is_available(node))
+		return 0;
+
+	ver = omap_display_get_version();
+
+	if (ver == OMAPDSS_VER_UNKNOWN) {
+		pr_err("DSS not supported on this SoC\n");
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(node);
+
+	if (!pdev) {
+		pr_err("Unable to find DSS platform device\n");
+		return -ENODEV;
+	}
+
+	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	if (r) {
+		pr_err("Unable to populate DSS submodule devices\n");
+		return r;
+	}
+
+	board_data.version = ver;
+
+	omap_display_device.dev.platform_data = &board_data;
+
+	r = platform_device_register(&omap_display_device);
+	if (r < 0) {
+		pr_err("Unable to register omapdss device\n");
+		return r;
+	}
+
+	/* create DRM device */
+	r = omap_init_drm();
+	if (r < 0) {
+		pr_err("Unable to register omapdrm device\n");
+		return r;
+	}
+
+	/* create vrfb device */
+	r = omap_init_vrfb();
+	if (r < 0) {
+		pr_err("Unable to register omapvrfb device\n");
+		return r;
+	}
+
+	/* create FB device */
+	r = omap_init_fb();
+	if (r < 0) {
+		pr_err("Unable to register omapfb device\n");
+		return r;
+	}
+
+	/* create V4L2 display device */
+	r = omap_init_vout();
+	if (r < 0) {
+		pr_err("Unable to register omap_vout device\n");
+		return r;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index f3d2ce4bc26235..7375854b16c7a9 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -30,4 +30,7 @@ int omap_init_drm(void);
 int omap_init_vrfb(void);
 int omap_init_fb(void);
 int omap_init_vout(void);
+
+struct device_node * __init omapdss_find_dss_of_node(void);
+
 #endif
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index dadccc91488c64..ab8cf26d50963f 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -33,6 +33,7 @@
 #include "soc.h"
 #include "dss-common.h"
 #include "mux.h"
+#include "display.h"
 
 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
@@ -101,6 +102,12 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
 
 void __init omap4_panda_display_init_of(void)
 {
+	struct device_node *node;
+
+	node = omapdss_find_dss_of_node();
+	if (node && of_device_is_available(node))
+		return;
+
 	omap_display_init(&omap4_panda_dss_data);
 
 	platform_device_register(&omap4_panda_tfp410_device);
@@ -194,6 +201,11 @@ static struct omap_dss_board_info sdp4430_dss_data = {
 void __init omap_4430sdp_display_init_of(void)
 {
 	int r;
+	struct device_node *node;
+
+	node = omapdss_find_dss_of_node();
+	if (node && of_device_is_available(node))
+		return;
 
 	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
 			"display_sel");
@@ -252,6 +264,12 @@ static struct omap_dss_board_info igep2_dss_data = {
 
 void __init omap3_igep2_display_init_of(void)
 {
+	struct device_node *node;
+
+	node = omapdss_find_dss_of_node();
+	if (node && of_device_is_available(node))
+		return;
+
 	omap_display_init(&igep2_dss_data);
 
 	platform_device_register(&omap3_igep2_tfp410_device);

From 6a0e6b3872f09550bf8e0587d375940092580360 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 19 Dec 2013 12:34:19 +0200
Subject: [PATCH 10/45] ARM: OMAP2+: DT 'compatible' tweak for displays

As there is no common panel framework in the kernel, we have OMAP
specific panel drivers. However, the DT data should be generic. This
brings the issue that some other platform could use the same panels, and
would need to create a driver with the same 'compatible' string as the
OMAP driver.

In the long run, we have to get a common panel framework. For the time
being, this patch solves the issue:

At early boot time, we go through the DT nodes looking for the panels
the kernel supports for OMAP. For each found node, the 'compatible'
string is prepended with "omapdss,", i.e. "sony,acx565akm" becomes
"omapdss,sony,acx565akm". The OMAP display drivers all have "omapdss,"
at the beginning of their compatible field.

This allows us to have generic DT data, but OMAP specific display
drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-generic.c |  2 +
 arch/arm/mach-omap2/common.h        |  1 +
 arch/arm/mach-omap2/display.c       | 62 +++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+)

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fcb7f5c271c95d..0db371a88e5ece 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -35,6 +35,8 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 
 static void __init omap_generic_init(void)
 {
+	omapdss_early_init_of();
+
 	pdata_quirks_init(omap_dt_match_table);
 
 	omapdss_init_of();
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 1864282dbddf93..d88aff7baff8d5 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -316,6 +316,7 @@ extern int omap_dss_reset(struct omap_hwmod *);
 int omap_clk_init(void);
 
 int __init omapdss_init_of(void);
+void __init omapdss_early_init_of(void);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a83ada38cae215..cf0cb35fa97287 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -555,6 +556,67 @@ int omap_dss_reset(struct omap_hwmod *oh)
 	return r;
 }
 
+/* list of 'compatible' nodes to convert to omapdss specific */
+static const char * const dss_compat_conv_list[] __initconst = {
+	"composite-connector",
+	"dvi-connector",
+	"hdmi-connector",
+	"panel-dpi",
+	"panel-dsi-cm",
+	"sony,acx565akm",
+	"svideo-connector",
+	"ti,tfp410",
+	"ti,tpd12s015",
+};
+
+/* prepend compatible string with "omapdss," */
+static __init void omapdss_omapify_node(struct device_node *node,
+	const char *compat)
+{
+	char *new_compat;
+	struct property *prop;
+
+	new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat);
+
+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+
+	if (!prop) {
+		pr_err("omapdss_omapify_node: kzalloc failed\n");
+		return;
+	}
+
+	prop->name = "compatible";
+	prop->value = new_compat;
+	prop->length = strlen(new_compat) + 1;
+
+	of_update_property(node, prop);
+}
+
+/*
+ * As omapdss panel drivers are omapdss specific, but we want to define the
+ * DT-data in generic manner, we convert the compatible strings of the panel
+ * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both
+ * correct DT data and omapdss specific drivers.
+ *
+ * When we get generic panel drivers to the kernel, this will be removed.
+ */
+void __init omapdss_early_init_of(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) {
+		const char *compat = dss_compat_conv_list[i];
+		struct device_node *node = NULL;
+
+		while ((node = of_find_compatible_node(node, NULL, compat))) {
+			if (!of_device_is_available(node))
+				continue;
+
+			omapdss_omapify_node(node, compat);
+		}
+	}
+}
+
 struct device_node * __init omapdss_find_dss_of_node(void)
 {
 	struct device_node *node;

From 7f2bcd06558a40deecd4a294acbd0b3f659be911 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 6 Aug 2013 09:41:32 +0300
Subject: [PATCH 11/45] OMAPDSS: add 'label' support for DT

Add support to get the label (i.e. a "nickname") for a display from the
DT data. If there is no label defined, use the display's alias (e.g.
'display0') as a name.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/display.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 669a81fdf58ef3..012ada38a29d48 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
@@ -137,6 +138,14 @@ int omapdss_register_display(struct omap_dss_device *dssdev)
 	snprintf(dssdev->alias, sizeof(dssdev->alias),
 			"display%d", disp_num_counter++);
 
+	/* Use 'label' property for name, if it exists */
+	if (dssdev->dev->of_node)
+		of_property_read_string(dssdev->dev->of_node, "label",
+			&dssdev->name);
+
+	if (dssdev->name == NULL)
+		dssdev->name = dssdev->alias;
+
 	if (drv && drv->get_resolution == NULL)
 		drv->get_resolution = omapdss_default_get_resolution;
 	if (drv && drv->get_recommended_bpp == NULL)

From 3e22b355343d808bb09cc47b5ecb261af3b5753b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 6 Aug 2013 09:50:22 +0300
Subject: [PATCH 12/45] OMAPDSS: get dssdev->alias from DT alias

We currently create a "displayX" style alias name for all displays,
using a number that is incremented for each registered display. With the
new DSS device model there is no clear order in which the displays are
registered, and thus the numbering is somewhat random.

This patch improves the behavior for DT case so that if the displays
have been assigned DT aliases, those aliases will be used as DSS
aliases.

This means that "display0" is always the one specified in the DT alias,
and thus display0 can be used as default display in case the user didn't
specify a default display.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/display.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 012ada38a29d48..21080f9dae876b 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -134,9 +134,24 @@ static int disp_num_counter;
 int omapdss_register_display(struct omap_dss_device *dssdev)
 {
 	struct omap_dss_driver *drv = dssdev->driver;
+	int id;
 
-	snprintf(dssdev->alias, sizeof(dssdev->alias),
-			"display%d", disp_num_counter++);
+	/*
+	 * Note: this presumes all the displays are either using DT or non-DT,
+	 * which normally should be the case. This also presumes that all
+	 * displays either have an DT alias, or none has.
+	 */
+
+	if (dssdev->dev->of_node) {
+		id = of_alias_get_id(dssdev->dev->of_node, "display");
+
+		if (id < 0)
+			id = disp_num_counter++;
+	} else {
+		id = disp_num_counter++;
+	}
+
+	snprintf(dssdev->alias, sizeof(dssdev->alias), "display%d", id);
 
 	/* Use 'label' property for name, if it exists */
 	if (dssdev->dev->of_node)

From 4b13defce85d4e3cbd7ddfd701856a78772de373 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 30 Jul 2013 10:59:16 +0300
Subject: [PATCH 13/45] OMAPFB: clean up default display search

Separate the code for finding the default display into a function for
clarity and to make it easier to extend it in the future.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 46 +++++++++++++++---------
 1 file changed, 29 insertions(+), 17 deletions(-)

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index fcb9e932d00cff..b7469636f15cf1 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2417,6 +2417,34 @@ static int omapfb_init_connections(struct omapfb2_device *fbdev,
 	return 0;
 }
 
+static struct omap_dss_device *
+omapfb_find_default_display(struct omapfb2_device *fbdev)
+{
+	const char *def_name;
+	int i;
+
+	/* search with the display name from the user or the board file */
+
+	def_name = omapdss_get_default_display_name();
+
+	if (def_name) {
+		for (i = 0; i < fbdev->num_displays; ++i) {
+			struct omap_dss_device *dssdev;
+
+			dssdev = fbdev->displays[i].dssdev;
+
+			if (dssdev->name && strcmp(def_name, dssdev->name) == 0)
+				return dssdev;
+		}
+
+		/* def_name given but not found */
+		return NULL;
+	}
+
+	/* return the first display we have in the list */
+	return fbdev->displays[0].dssdev;
+}
+
 static int omapfb_probe(struct platform_device *pdev)
 {
 	struct omapfb2_device *fbdev = NULL;
@@ -2494,23 +2522,7 @@ static int omapfb_probe(struct platform_device *pdev)
 	for (i = 0; i < fbdev->num_managers; i++)
 		fbdev->managers[i] = omap_dss_get_overlay_manager(i);
 
-	def_display = NULL;
-
-	for (i = 0; i < fbdev->num_displays; ++i) {
-		struct omap_dss_device *dssdev;
-		const char *def_name;
-
-		def_name = omapdss_get_default_display_name();
-
-		dssdev = fbdev->displays[i].dssdev;
-
-		if (def_name == NULL ||
-			(dssdev->name && strcmp(def_name, dssdev->name) == 0)) {
-			def_display = dssdev;
-			break;
-		}
-	}
-
+	def_display = omapfb_find_default_display(fbdev);
 	if (def_display == NULL) {
 		dev_err(fbdev->dev, "failed to find default display\n");
 		r = -EPROBE_DEFER;

From a6ec216493da705a5f6fc96098c5f4af10e2be44 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 6 Aug 2013 09:50:52 +0300
Subject: [PATCH 14/45] OMAPFB: search for default display with DT alias

Improve the search for the default display in two ways:
* compare the given display name to the display's alias
* if no display name is given, look for "display0" DT alias

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index b7469636f15cf1..f121e87b30be1f 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2423,7 +2423,10 @@ omapfb_find_default_display(struct omapfb2_device *fbdev)
 	const char *def_name;
 	int i;
 
-	/* search with the display name from the user or the board file */
+	/*
+	 * Search with the display name from the user or the board file,
+	 * comparing to display names and aliases
+	 */
 
 	def_name = omapdss_get_default_display_name();
 
@@ -2435,12 +2438,30 @@ omapfb_find_default_display(struct omapfb2_device *fbdev)
 
 			if (dssdev->name && strcmp(def_name, dssdev->name) == 0)
 				return dssdev;
+
+			if (strcmp(def_name, dssdev->alias) == 0)
+				return dssdev;
 		}
 
 		/* def_name given but not found */
 		return NULL;
 	}
 
+	/* then look for DT alias display0 */
+	for (i = 0; i < fbdev->num_displays; ++i) {
+		struct omap_dss_device *dssdev;
+		int id;
+
+		dssdev = fbdev->displays[i].dssdev;
+
+		if (dssdev->dev->of_node == NULL)
+			continue;
+
+		id = of_alias_get_id(dssdev->dev->of_node, "display");
+		if (id == 0)
+			return dssdev;
+	}
+
 	/* return the first display we have in the list */
 	return fbdev->displays[0].dssdev;
 }

From 4e7470ddca671aee2f5d11ba68573c94feddc5c2 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 3 Dec 2013 16:57:40 +0200
Subject: [PATCH 15/45] OMAPDSS: add of helpers

Add helpers to get ports and endpoints from DT data.

These helpers parse v4l2 style ports and endpoints, but compared to the
v4l2 helpers, these allow iterating ports and endpoints separately.

This is a temporary solution until we get generic code to parse the
ports and endpoints.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/Makefile |   2 +-
 drivers/video/omap2/dss/dss-of.c | 159 +++++++++++++++++++++++++++++++
 include/video/omapdss.h          |  14 +++
 3 files changed, 174 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/omap2/dss/dss-of.c

diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index d3aa91bdd6a8a3..8aec8bda27ccfe 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 # Core DSS files
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	output.o
+	output.o dss-of.o
 # DSS compat layer files
 omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
 	dispc-compat.o display-sysfs.o
diff --git a/drivers/video/omap2/dss/dss-of.c b/drivers/video/omap2/dss/dss-of.c
new file mode 100644
index 00000000000000..a4b20aaf61428c
--- /dev/null
+++ b/drivers/video/omap2/dss/dss-of.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/seq_file.h>
+
+#include <video/omapdss.h>
+
+struct device_node *
+omapdss_of_get_next_port(const struct device_node *parent,
+			 struct device_node *prev)
+{
+	struct device_node *port = NULL;
+
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *ports;
+		/*
+		 * It's the first call, we have to find a port subnode
+		 * within this node or within an optional 'ports' node.
+		 */
+		ports = of_get_child_by_name(parent, "ports");
+		if (ports)
+			parent = ports;
+
+		port = of_get_child_by_name(parent, "port");
+
+		/* release the 'ports' node */
+		of_node_put(ports);
+	} else {
+		struct device_node *ports;
+
+		ports = of_get_parent(prev);
+		if (!ports)
+			return NULL;
+
+		do {
+			port = of_get_next_child(ports, prev);
+			if (!port) {
+				of_node_put(ports);
+				return NULL;
+			}
+			prev = port;
+		} while (of_node_cmp(port->name, "port") != 0);
+	}
+
+	return port;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_next_port);
+
+struct device_node *
+omapdss_of_get_next_endpoint(const struct device_node *parent,
+			     struct device_node *prev)
+{
+	struct device_node *ep = NULL;
+
+	if (!parent)
+		return NULL;
+
+	do {
+		ep = of_get_next_child(parent, prev);
+		if (!ep)
+			return NULL;
+		prev = ep;
+	} while (of_node_cmp(ep->name, "endpoint") != 0);
+
+	return ep;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_next_endpoint);
+
+static struct device_node *
+omapdss_of_get_remote_device_node(const struct device_node *node)
+{
+	struct device_node *np;
+	int i;
+
+	np = of_parse_phandle(node, "remote-endpoint", 0);
+
+	if (!np)
+		return NULL;
+
+	np = of_get_next_parent(np);
+
+	for (i = 0; i < 3 && np; ++i) {
+		struct property *prop;
+
+		prop = of_find_property(np, "compatible", NULL);
+
+		if (prop)
+			return np;
+
+		np = of_get_next_parent(np);
+	}
+
+	return NULL;
+}
+
+struct device_node *
+omapdss_of_get_first_endpoint(const struct device_node *parent)
+{
+	struct device_node *port, *ep;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+
+	if (!port)
+		return NULL;
+
+	ep = omapdss_of_get_next_endpoint(port, NULL);
+
+	of_node_put(port);
+
+	return ep;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_first_endpoint);
+
+struct omap_dss_device *
+omapdss_of_find_source_for_first_ep(struct device_node *node)
+{
+	struct device_node *ep;
+	struct device_node *src_node;
+	struct omap_dss_device *src;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return ERR_PTR(-EINVAL);
+
+	src_node = omapdss_of_get_remote_device_node(ep);
+
+	of_node_put(ep);
+
+	if (!src_node)
+		return ERR_PTR(-EINVAL);
+
+	src = omap_dss_find_output_by_node(src_node);
+
+	of_node_put(src_node);
+
+	if (!src)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return src;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_find_source_for_first_ep);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3d7c51a6f9ff27..e3cd2a921c2f20 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -1019,4 +1019,18 @@ static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)
 	return dssdev->state == OMAP_DSS_DISPLAY_ACTIVE;
 }
 
+struct device_node *
+omapdss_of_get_next_port(const struct device_node *parent,
+			 struct device_node *prev);
+
+struct device_node *
+omapdss_of_get_next_endpoint(const struct device_node *parent,
+			     struct device_node *prev);
+
+struct device_node *
+omapdss_of_get_first_endpoint(const struct device_node *parent);
+
+struct omap_dss_device *
+omapdss_of_find_source_for_first_ep(struct device_node *node);
+
 #endif

From e6fa68ba82959bd2468271788d89e0fdb2f781e4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 2 Jan 2014 12:54:31 +0200
Subject: [PATCH 16/45] OMAPDSS: Improve regulator names for DT

The regulator names used for DSS components are somewhat ugly for DT
use. As we're just adding DT support, it's simple to change the
regulator names.

This patch makes the DSS driver get the regulators with somewhat cleaner
names when bootin with DT. For example, this allows us to define HDMI's
VDDA regulator in the DT data as:

vdda-supply = <...>;

instead of

vdda_hdmi_dac-supply = <...>;

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c   | 5 ++++-
 drivers/video/omap2/dss/hdmi4.c | 5 ++++-
 drivers/video/omap2/dss/venc.c  | 5 ++++-
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index a820c37e323ed6..782e8989fcfb7e 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1151,7 +1151,10 @@ static int dsi_regulator_init(struct platform_device *dsidev)
 	if (dsi->vdds_dsi_reg != NULL)
 		return 0;
 
-	vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdds_dsi");
+	if (dsi->pdev->dev.of_node)
+		vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdd");
+	else
+		vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdds_dsi");
 
 	/* DT HACK: try VCXIO to make omapdss work for o4 sdp/panda */
 	if (IS_ERR(vdds_dsi))
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/omap2/dss/hdmi4.c
index 4a74538f9ea5ea..ba6f02518ebef2 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/omap2/dss/hdmi4.c
@@ -88,7 +88,10 @@ static int hdmi_init_regulator(void)
 	if (hdmi.vdda_hdmi_dac_reg != NULL)
 		return 0;
 
-	reg = devm_regulator_get(&hdmi.pdev->dev, "vdda_hdmi_dac");
+	if (hdmi.pdev->dev.of_node)
+		reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
+	else
+		reg = devm_regulator_get(&hdmi.pdev->dev, "vdda_hdmi_dac");
 
 	/* DT HACK: try VDAC to make omapdss work for o4 sdp/panda */
 	if (IS_ERR(reg))
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 2cd7f7e42105a7..7d40e52ad6d150 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -636,7 +636,10 @@ static int venc_init_regulator(void)
 	if (venc.vdda_dac_reg != NULL)
 		return 0;
 
-	vdda_dac = devm_regulator_get(&venc.pdev->dev, "vdda_dac");
+	if (venc.pdev->dev.of_node)
+		vdda_dac = devm_regulator_get(&venc.pdev->dev, "vdda");
+	else
+		vdda_dac = devm_regulator_get(&venc.pdev->dev, "vdda_dac");
 
 	if (IS_ERR(vdda_dac)) {
 		if (PTR_ERR(vdda_dac) != -EPROBE_DEFER)

From 2ecef24630f434e58bf3e5adb4d9bb76e50daf78 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 16 Dec 2013 15:13:24 +0200
Subject: [PATCH 17/45] OMAPDSS: Add DT support to DSS

Add DT support for DSS. Contrary to the non-DT version, the DSS in DT
mode contains DPI and SDI outputs, which better reflects the hardware.
The non-DT code will be removed after all boards have been converted to
DT, so there's no need to change the non-DT code to act the same way.

The code for DPI and SDI needs to be refined later to make it possible
to add multiple DPI ports. For now, handling just a single DPI port is
enough for all the boards.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dpi.c | 47 +++++++++++++++++++++++++
 drivers/video/omap2/dss/dss.c | 66 +++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss.h |  6 ++++
 drivers/video/omap2/dss/sdi.c | 45 ++++++++++++++++++++++++
 4 files changed, 164 insertions(+)

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 23ef21ffc2c499..f02520ff6e32c6 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -49,6 +50,8 @@ static struct {
 	int data_lines;
 
 	struct omap_dss_device output;
+
+	bool port_initialized;
 } dpi;
 
 static struct platform_device *dpi_get_dsidev(enum omap_channel channel)
@@ -726,3 +729,47 @@ void __exit dpi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_dpi_driver);
 }
+
+int __init dpi_init_port(struct platform_device *pdev, struct device_node *port)
+{
+	struct device_node *ep;
+	u32 datalines;
+	int r;
+
+	ep = omapdss_of_get_next_endpoint(port, NULL);
+	if (!ep)
+		return 0;
+
+	r = of_property_read_u32(ep, "data-lines", &datalines);
+	if (r) {
+		DSSERR("failed to parse datalines\n");
+		goto err_datalines;
+	}
+
+	dpi.data_lines = datalines;
+
+	of_node_put(ep);
+
+	dpi.pdev = pdev;
+
+	mutex_init(&dpi.lock);
+
+	dpi_init_output(pdev);
+
+	dpi.port_initialized = true;
+
+	return 0;
+
+err_datalines:
+	of_node_put(ep);
+
+	return r;
+}
+
+void __exit dpi_uninit_port(void)
+{
+	if (!dpi.port_initialized)
+		return;
+
+	dpi_uninit_output(dpi.pdev);
+}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 9a145da35ad3a2..1b1c02dfdcf9b0 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -23,6 +23,7 @@
 #define DSS_SUBSYS_NAME "DSS"
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/err.h>
@@ -33,6 +34,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/gfp.h>
 #include <linux/sizes.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -788,6 +790,56 @@ static int __init dss_init_features(struct platform_device *pdev)
 	return 0;
 }
 
+static int dss_init_ports(struct platform_device *pdev)
+{
+	struct device_node *parent = pdev->dev.of_node;
+	struct device_node *port;
+	int r;
+
+	if (parent == NULL)
+		return 0;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+	if (!port) {
+#ifdef CONFIG_OMAP2_DSS_DPI
+		dpi_init_port(pdev, parent);
+#endif
+		return 0;
+	}
+
+	do {
+		u32 reg;
+
+		r = of_property_read_u32(port, "reg", &reg);
+		if (r)
+			reg = 0;
+
+#ifdef CONFIG_OMAP2_DSS_DPI
+		if (reg == 0)
+			dpi_init_port(pdev, port);
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+		if (reg == 1)
+			sdi_init_port(pdev, port);
+#endif
+
+	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+
+	return 0;
+}
+
+static void dss_uninit_ports(void)
+{
+#ifdef CONFIG_OMAP2_DSS_DPI
+	dpi_uninit_port();
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+	sdi_uninit_port();
+#endif
+}
+
 /* DSS HW IP initialisation */
 static int __init omap_dsshw_probe(struct platform_device *pdev)
 {
@@ -846,6 +898,8 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 	dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
 	dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
 
+	dss_init_ports(pdev);
+
 	rev = dss_read_reg(DSS_REVISION);
 	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
 			FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -865,6 +919,8 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 static int __exit omap_dsshw_remove(struct platform_device *pdev)
 {
+	dss_uninit_ports();
+
 	pm_runtime_disable(&pdev->dev);
 
 	dss_put_clocks();
@@ -902,12 +958,22 @@ static const struct dev_pm_ops dss_pm_ops = {
 	.runtime_resume = dss_runtime_resume,
 };
 
+static const struct of_device_id dss_of_match[] = {
+	{ .compatible = "ti,omap2-dss", },
+	{ .compatible = "ti,omap3-dss", },
+	{ .compatible = "ti,omap4-dss", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dss_of_match);
+
 static struct platform_driver omap_dsshw_driver = {
 	.remove         = __exit_p(omap_dsshw_remove),
 	.driver         = {
 		.name   = "omapdss_dss",
 		.owner  = THIS_MODULE,
 		.pm	= &dss_pm_ops,
+		.of_match_table = dss_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 057f24c8a3325b..8ece4f53100603 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -252,6 +252,9 @@ bool dss_div_calc(unsigned long pck, unsigned long fck_min,
 int sdi_init_platform_driver(void) __init;
 void sdi_uninit_platform_driver(void) __exit;
 
+int sdi_init_port(struct platform_device *pdev, struct device_node *port) __init;
+void sdi_uninit_port(void) __exit;
+
 /* DSI */
 
 typedef bool (*dsi_pll_calc_func)(int regn, int regm, unsigned long fint,
@@ -363,6 +366,9 @@ static inline bool dsi_pll_calc(struct platform_device *dsidev,
 int dpi_init_platform_driver(void) __init;
 void dpi_uninit_platform_driver(void) __exit;
 
+int dpi_init_port(struct platform_device *pdev, struct device_node *port) __init;
+void dpi_uninit_port(void) __exit;
+
 /* DISPC */
 int dispc_init_platform_driver(void) __init;
 void dispc_uninit_platform_driver(void) __exit;
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index ba806c9e7f5486..d16277ca22a831 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/string.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
@@ -41,6 +42,8 @@ static struct {
 	int datapairs;
 
 	struct omap_dss_device output;
+
+	bool port_initialized;
 } sdi;
 
 struct sdi_clk_calc_ctx {
@@ -387,3 +390,45 @@ void __exit sdi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_sdi_driver);
 }
+
+int __init sdi_init_port(struct platform_device *pdev, struct device_node *port)
+{
+	struct device_node *ep;
+	u32 datapairs;
+	int r;
+
+	ep = omapdss_of_get_next_endpoint(port, NULL);
+	if (!ep)
+		return 0;
+
+	r = of_property_read_u32(ep, "datapairs", &datapairs);
+	if (r) {
+		DSSERR("failed to parse datapairs\n");
+		goto err_datapairs;
+	}
+
+	sdi.datapairs = datapairs;
+
+	of_node_put(ep);
+
+	sdi.pdev = pdev;
+
+	sdi_init_output(pdev);
+
+	sdi.port_initialized = true;
+
+	return 0;
+
+err_datapairs:
+	of_node_put(ep);
+
+	return r;
+}
+
+void __exit sdi_uninit_port(void)
+{
+	if (!sdi.port_initialized)
+		return;
+
+	sdi_uninit_output(sdi.pdev);
+}

From d7977f888b83d29506a59bf3fbf6c36085a0b2b9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 17 Dec 2013 11:54:02 +0200
Subject: [PATCH 18/45] OMAPDSS: Add DT support to DISPC

Add DT support to DISPC. Only thing needed here is the of_match_table.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 77d6221618f4eb..7c3e4ec1ae33b0 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3780,12 +3780,20 @@ static const struct dev_pm_ops dispc_pm_ops = {
 	.runtime_resume = dispc_runtime_resume,
 };
 
+static const struct of_device_id dispc_of_match[] = {
+	{ .compatible = "ti,omap2-dispc", },
+	{ .compatible = "ti,omap3-dispc", },
+	{ .compatible = "ti,omap4-dispc", },
+	{},
+};
+
 static struct platform_driver omap_dispchw_driver = {
 	.remove         = __exit_p(omap_dispchw_remove),
 	.driver         = {
 		.name   = "omapdss_dispc",
 		.owner  = THIS_MODULE,
 		.pm	= &dispc_pm_ops,
+		.of_match_table = dispc_of_match,
 	},
 };
 

From 0465616d34e928ed0041f37b507cb1fa0b41372d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 16 Dec 2013 15:14:04 +0200
Subject: [PATCH 19/45] OMAPDSS: Add DT support to HDMI

Add DT support to HDMI driver. The only thing needed for DT support here
is the of_match_table.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/hdmi4.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/omap2/dss/hdmi4.c
index ba6f02518ebef2..a2a4d955d71eed 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/omap2/dss/hdmi4.c
@@ -682,6 +682,11 @@ static const struct dev_pm_ops hdmi_pm_ops = {
 	.runtime_resume = hdmi_runtime_resume,
 };
 
+static const struct of_device_id hdmi_of_match[] = {
+	{ .compatible = "ti,omap4-hdmi", },
+	{},
+};
+
 static struct platform_driver omapdss_hdmihw_driver = {
 	.probe		= omapdss_hdmihw_probe,
 	.remove         = __exit_p(omapdss_hdmihw_remove),
@@ -689,6 +694,7 @@ static struct platform_driver omapdss_hdmihw_driver = {
 		.name   = "omapdss_hdmi",
 		.owner  = THIS_MODULE,
 		.pm	= &hdmi_pm_ops,
+		.of_match_table = hdmi_of_match,
 	},
 };
 

From a2207021f22d74cc0485042e296b016a2199e443 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 16 Dec 2013 15:14:15 +0200
Subject: [PATCH 20/45] OMAPDSS: Add DT support to VENC

Add DT support to VENC.

In contrast to non-DT version, the DT version gets the invert-polarity
and connector type via venc's endpoint, not from the connector.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/venc.c | 61 ++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 7d40e52ad6d150..fc7069a245150d 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -34,6 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -808,6 +809,48 @@ static void __exit venc_uninit_output(struct platform_device *pdev)
 	omapdss_unregister_output(out);
 }
 
+static int venc_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *ep;
+	u32 channels;
+	int r;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return 0;
+
+	venc.invert_polarity = of_property_read_bool(ep, "ti,invert-polarity");
+
+	r = of_property_read_u32(ep, "ti,channels", &channels);
+	if (r) {
+		dev_err(&pdev->dev,
+			"failed to read property 'ti,channels': %d\n", r);
+		goto err;
+	}
+
+	switch (channels) {
+	case 1:
+		venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE;
+		break;
+	case 2:
+		venc.type = OMAP_DSS_VENC_TYPE_SVIDEO;
+		break;
+	default:
+		dev_err(&pdev->dev, "bad channel propert '%d'\n", channels);
+		r = -EINVAL;
+		goto err;
+	}
+
+	of_node_put(ep);
+
+	return 0;
+err:
+	of_node_put(ep);
+
+	return 0;
+}
+
 /* VENC HW IP initialisation */
 static int omap_venchw_probe(struct platform_device *pdev)
 {
@@ -849,12 +892,21 @@ static int omap_venchw_probe(struct platform_device *pdev)
 
 	venc_runtime_put();
 
+	if (pdev->dev.of_node) {
+		r = venc_probe_of(pdev);
+		if (r) {
+			DSSERR("Invalid DT data\n");
+			goto err_probe_of;
+		}
+	}
+
 	dss_debugfs_create_file("venc", venc_dump_regs);
 
 	venc_init_output(pdev);
 
 	return 0;
 
+err_probe_of:
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	return r;
@@ -898,6 +950,14 @@ static const struct dev_pm_ops venc_pm_ops = {
 	.runtime_resume = venc_runtime_resume,
 };
 
+
+static const struct of_device_id venc_of_match[] = {
+	{ .compatible = "ti,omap2-venc", },
+	{ .compatible = "ti,omap3-venc", },
+	{ .compatible = "ti,omap4-venc", },
+	{},
+};
+
 static struct platform_driver omap_venchw_driver = {
 	.probe		= omap_venchw_probe,
 	.remove         = __exit_p(omap_venchw_remove),
@@ -905,6 +965,7 @@ static struct platform_driver omap_venchw_driver = {
 		.name   = "omapdss_venc",
 		.owner  = THIS_MODULE,
 		.pm	= &venc_pm_ops,
+		.of_match_table = venc_of_match,
 	},
 };
 

From 6274a619780e62610edcec12cead023053767a6f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Aug 2012 15:35:42 +0300
Subject: [PATCH 21/45] OMAPDSS: Add DT support to DSI

Add the code to make the DSI driver work with device tree on OMAP3 and
OMAP4.

A minor hack is needed at the moment in the DSI driver: the DSS driver
needs to know the ID number of a DSI device, as clocks are routed in
different ways to the DSI devices. At the moment we don't have any
proper way to manage this, so this patchs adds a simple lookup table
that is used to deduce the ID from the DSI device's base address.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 139 +++++++++++++++++++++++++++++++++-
 1 file changed, 138 insertions(+), 1 deletion(-)

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 782e8989fcfb7e..efb24b377d04a1 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -38,6 +38,8 @@
 #include <linux/slab.h>
 #include <linux/debugfs.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include <video/omapdss.h>
 #include <video/mipi_display.h>
@@ -386,6 +388,13 @@ struct dsi_packet_sent_handler_data {
 	struct completion *completion;
 };
 
+struct dsi_module_id_data {
+	u32 address;
+	int id;
+};
+
+static const struct of_device_id dsi_of_match[];
+
 #ifdef DSI_PERF_MEASURE
 static bool dsi_perf;
 module_param(dsi_perf, bool, 0644);
@@ -5373,12 +5382,69 @@ static void dsi_uninit_output(struct platform_device *dsidev)
 	omapdss_unregister_output(out);
 }
 
+static int dsi_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+	struct property *prop;
+	u32 lane_arr[10];
+	int len, num_pins;
+	int r, i;
+	struct device_node *ep;
+	struct omap_dsi_pin_config pin_cfg;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return 0;
+
+	prop = of_find_property(ep, "lanes", &len);
+	if (prop == NULL) {
+		dev_err(&pdev->dev, "failed to find lane data\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	num_pins = len / sizeof(u32);
+
+	if (num_pins < 4 || num_pins % 2 != 0 ||
+		num_pins > dsi->num_lanes_supported * 2) {
+		dev_err(&pdev->dev, "bad number of lanes\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	r = of_property_read_u32_array(ep, "lanes", lane_arr, num_pins);
+	if (r) {
+		dev_err(&pdev->dev, "failed to read lane data\n");
+		goto err;
+	}
+
+	pin_cfg.num_pins = num_pins;
+	for (i = 0; i < num_pins; ++i)
+		pin_cfg.pins[i] = (int)lane_arr[i];
+
+	r = dsi_configure_pins(&dsi->output, &pin_cfg);
+	if (r) {
+		dev_err(&pdev->dev, "failed to configure pins");
+		goto err;
+	}
+
+	of_node_put(ep);
+
+	return 0;
+
+err:
+	of_node_put(ep);
+	return r;
+}
+
 /* DSI1 HW IP initialisation */
 static int omap_dsihw_probe(struct platform_device *dsidev)
 {
 	u32 rev;
 	int r, i;
 	struct dsi_data *dsi;
+	struct resource *dsi_mem;
 	struct resource *res;
 	struct resource temp_res;
 
@@ -5386,7 +5452,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	if (!dsi)
 		return -ENOMEM;
 
-	dsi->module_id = dsidev->id;
 	dsi->pdev = dsidev;
 	dev_set_drvdata(&dsidev->dev, dsi);
 
@@ -5424,6 +5489,8 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 		res = &temp_res;
 	}
 
+	dsi_mem = res;
+
 	dsi->proto_base = devm_ioremap(&dsidev->dev, res->start,
 		resource_size(res));
 	if (!dsi->proto_base) {
@@ -5484,6 +5551,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 		return r;
 	}
 
+	if (dsidev->dev.of_node) {
+		const struct of_device_id *match;
+		const struct dsi_module_id_data *d;
+
+		match = of_match_node(dsi_of_match, dsidev->dev.of_node);
+		if (!match) {
+			DSSERR("unsupported DSI module\n");
+			return -ENODEV;
+		}
+
+		d = match->data;
+
+		while (d->address != 0 && d->address != dsi_mem->start)
+			d++;
+
+		if (d->address == 0) {
+			DSSERR("unsupported DSI module\n");
+			return -ENODEV;
+		}
+
+		dsi->module_id = d->id;
+	} else {
+		dsi->module_id = dsidev->id;
+	}
+
 	/* DSI VCs initialization */
 	for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
 		dsi->vc[i].source = DSI_VC_SOURCE_L4;
@@ -5519,6 +5611,19 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	dsi_init_output(dsidev);
 
+	if (dsidev->dev.of_node) {
+		r = dsi_probe_of(dsidev);
+		if (r) {
+			DSSERR("Invalid DSI DT data\n");
+			goto err_probe_of;
+		}
+
+		r = of_platform_populate(dsidev->dev.of_node, NULL, NULL,
+			&dsidev->dev);
+		if (r)
+			DSSERR("Failed to populate DSI child devices: %d\n", r);
+	}
+
 	dsi_runtime_put(dsidev);
 
 	if (dsi->module_id == 0)
@@ -5532,17 +5637,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	else if (dsi->module_id == 1)
 		dss_debugfs_create_file("dsi2_irqs", dsi2_dump_irqs);
 #endif
+
 	return 0;
 
+err_probe_of:
+	dsi_uninit_output(dsidev);
+	dsi_runtime_put(dsidev);
+
 err_runtime_get:
 	pm_runtime_disable(&dsidev->dev);
 	return r;
 }
 
+static int dsi_unregister_child(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	platform_device_unregister(pdev);
+	return 0;
+}
+
 static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
+	device_for_each_child(&dsidev->dev, NULL, dsi_unregister_child);
+
 	WARN_ON(dsi->scp_clk_refcount > 0);
 
 	dsi_uninit_output(dsidev);
@@ -5580,6 +5699,23 @@ static const struct dev_pm_ops dsi_pm_ops = {
 	.runtime_resume = dsi_runtime_resume,
 };
 
+static const struct dsi_module_id_data dsi_of_data_omap3[] = {
+	{ .address = 0x4804fc00, .id = 0, },
+	{ },
+};
+
+static const struct dsi_module_id_data dsi_of_data_omap4[] = {
+	{ .address = 0x58004000, .id = 0, },
+	{ .address = 0x58005000, .id = 1, },
+	{ },
+};
+
+static const struct of_device_id dsi_of_match[] = {
+	{ .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
+	{ .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
+	{},
+};
+
 static struct platform_driver omap_dsihw_driver = {
 	.probe		= omap_dsihw_probe,
 	.remove         = __exit_p(omap_dsihw_remove),
@@ -5587,6 +5723,7 @@ static struct platform_driver omap_dsihw_driver = {
 		.name   = "omapdss_dsi",
 		.owner  = THIS_MODULE,
 		.pm	= &dsi_pm_ops,
+		.of_match_table = dsi_of_match,
 	},
 };
 

From cdeeaca2a11d31d11e50590c6ddcee5e322ed6a4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 30 Jul 2013 10:34:16 +0300
Subject: [PATCH 22/45] OMAPDSS: panel-dsi-cm: Add DT support

Add DT support for panel-dsi-cm.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../video/omap2/displays-new/panel-dsi-cm.c   | 60 +++++++++++++++++--
 1 file changed, 56 insertions(+), 4 deletions(-)

diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/omap2/displays-new/panel-dsi-cm.c
index b7baafe83aa3dd..a647e94c8b0867 100644
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ b/drivers/video/omap2/displays-new/panel-dsi-cm.c
@@ -22,6 +22,8 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -595,10 +597,13 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
 		.lp_clk_max = 10000000,
 	};
 
-	r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
-	if (r) {
-		dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n");
-		goto err0;
+	if (ddata->pin_config.num_pins > 0) {
+		r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
+		if (r) {
+			dev_err(&ddata->pdev->dev,
+				"failed to configure DSI pins\n");
+			goto err0;
+		}
 	}
 
 	r = in->ops.dsi->set_config(in, &dsi_config);
@@ -1156,6 +1161,41 @@ static int dsicm_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int dsicm_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse reset gpio\n");
+		return gpio;
+	}
+	ddata->reset_gpio = gpio;
+
+	gpio = of_get_named_gpio(node, "te-gpios", 0);
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->ext_te_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse TE gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	/* TODO: ulps, backlight */
+
+	return 0;
+}
+
 static int dsicm_probe(struct platform_device *pdev)
 {
 	struct backlight_properties props;
@@ -1178,6 +1218,10 @@ static int dsicm_probe(struct platform_device *pdev)
 		r = dsicm_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = dsicm_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -1320,12 +1364,20 @@ static int __exit dsicm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id dsicm_of_match[] = {
+	{ .compatible = "omapdss,panel-dsi-cm", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dsicm_of_match);
+
 static struct platform_driver dsicm_driver = {
 	.probe = dsicm_probe,
 	.remove = __exit_p(dsicm_remove),
 	.driver = {
 		.name = "panel-dsi-cm",
 		.owner = THIS_MODULE,
+		.of_match_table = dsicm_of_match,
 	},
 };
 

From cfa71144df6d9eb3a15f58383ef3c7d507f113f3 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 30 Jul 2013 10:35:30 +0300
Subject: [PATCH 23/45] OMAPDSS: encoder-tfp410: Add DT support

Add DT support for encoder-tfp410.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../video/omap2/displays-new/encoder-tfp410.c | 43 ++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/omap2/displays-new/encoder-tfp410.c
index 4a291e756be944..b4e9a42a79e61c 100644
--- a/drivers/video/omap2/displays-new/encoder-tfp410.c
+++ b/drivers/video/omap2/displays-new/encoder-tfp410.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -82,7 +83,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
 		return 0;
 
 	in->ops.dpi->set_timings(in, &ddata->timings);
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 
 	r = in->ops.dpi->enable(in);
 	if (r)
@@ -179,6 +181,33 @@ static int tfp410_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int tfp410_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
+
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->pd_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse PD gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tfp410_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -195,6 +224,10 @@ static int tfp410_probe(struct platform_device *pdev)
 		r = tfp410_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = tfp410_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -251,12 +284,20 @@ static int __exit tfp410_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id tfp410_of_match[] = {
+	{ .compatible = "omapdss,ti,tfp410", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tfp410_of_match);
+
 static struct platform_driver tfp410_driver = {
 	.probe	= tfp410_probe,
 	.remove	= __exit_p(tfp410_remove),
 	.driver	= {
 		.name	= "tfp410",
 		.owner	= THIS_MODULE,
+		.of_match_table = tfp410_of_match,
 	},
 };
 

From 2cbe2304ba65d5096907a419beebab98c4bd19df Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 30 Jul 2013 10:36:29 +0300
Subject: [PATCH 24/45] OMAPDSS: connector-dvi: Add DT support

Add DT support for connector-dvi.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../video/omap2/displays-new/connector-dvi.c  | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/omap2/displays-new/connector-dvi.c
index b6c50904038efc..d5fb77147f9eef 100644
--- a/drivers/video/omap2/displays-new/connector-dvi.c
+++ b/drivers/video/omap2/displays-new/connector-dvi.c
@@ -277,6 +277,37 @@ static int dvic_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int dvic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	struct device_node *adapter_node;
+	struct i2c_adapter *adapter;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
+	if (adapter_node) {
+		adapter = of_find_i2c_adapter_by_node(adapter_node);
+		if (adapter == NULL) {
+			dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
+			omap_dss_put_device(ddata->in);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	return 0;
+}
+
 static int dvic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -293,6 +324,10 @@ static int dvic_probe(struct platform_device *pdev)
 		r = dvic_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = dvic_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -342,12 +377,20 @@ static int __exit dvic_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id dvic_of_match[] = {
+	{ .compatible = "omapdss,dvi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dvic_of_match);
+
 static struct platform_driver dvi_connector_driver = {
 	.probe	= dvic_probe,
 	.remove	= __exit_p(dvic_remove),
 	.driver	= {
 		.name	= "connector-dvi",
 		.owner	= THIS_MODULE,
+		.of_match_table = dvic_of_match,
 	},
 };
 

From 5e4c89c018751e831b2687b926bd956a16a4a777 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 30 Jul 2013 10:37:17 +0300
Subject: [PATCH 25/45] OMAPDSS: encoder-tpd12s015: Add DT support

Add DT support for encoder-tpd12s015.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../omap2/displays-new/encoder-tpd12s015.c    | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
index d5c936cb217fe7..7e33686171e3dd 100644
--- a/drivers/video/omap2/displays-new/encoder-tpd12s015.c
+++ b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -289,6 +290,49 @@ static int tpd_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int tpd_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	/* CT CP HPD GPIO */
+	gpio = of_get_gpio(node, 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse CT CP HPD gpio\n");
+		return gpio;
+	}
+	ddata->ct_cp_hpd_gpio = gpio;
+
+	/* LS OE GPIO */
+	gpio = of_get_gpio(node, 1);
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->ls_oe_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse LS OE gpio\n");
+		return gpio;
+	}
+
+	/* HPD GPIO */
+	gpio = of_get_gpio(node, 2);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
+		return gpio;
+	}
+	ddata->hpd_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tpd_probe(struct platform_device *pdev)
 {
 	struct omap_dss_device *in, *dssdev;
@@ -307,6 +351,10 @@ static int tpd_probe(struct platform_device *pdev)
 		r = tpd_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = tpd_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -379,12 +427,20 @@ static int __exit tpd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id tpd_of_match[] = {
+	{ .compatible = "omapdss,ti,tpd12s015", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpd_of_match);
+
 static struct platform_driver tpd_driver = {
 	.probe	= tpd_probe,
 	.remove	= __exit_p(tpd_remove),
 	.driver	= {
 		.name	= "tpd12s015",
 		.owner	= THIS_MODULE,
+		.of_match_table = tpd_of_match,
 	},
 };
 

From 0b8879f4714b6d372f240555d8366c8c3ea45c32 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 30 Jul 2013 10:37:34 +0300
Subject: [PATCH 26/45] OMAPDSS: hdmi-connector: Add DT support

Add DT support for hdmi-connector.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../video/omap2/displays-new/connector-hdmi.c | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/omap2/displays-new/connector-hdmi.c
index 9abe2c039ae9c4..2e026eab2dd00c 100644
--- a/drivers/video/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/omap2/displays-new/connector-hdmi.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <drm/drm_edid.h>
 
@@ -301,6 +302,23 @@ static int hdmic_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int hdmic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int hdmic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -318,6 +336,10 @@ static int hdmic_probe(struct platform_device *pdev)
 		r = hdmic_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = hdmic_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -359,12 +381,20 @@ static int __exit hdmic_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id hdmic_of_match[] = {
+	{ .compatible = "omapdss,hdmi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, hdmic_of_match);
+
 static struct platform_driver hdmi_connector_driver = {
 	.probe	= hdmic_probe,
 	.remove	= __exit_p(hdmic_remove),
 	.driver	= {
 		.name	= "connector-hdmi",
 		.owner	= THIS_MODULE,
+		.of_match_table = hdmic_of_match,
 	},
 };
 

From fcc900a6e4e786062201f816977aced847d9c615 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 29 May 2013 15:34:06 +0300
Subject: [PATCH 27/45] OMAPDSS: connector-analog-tv: Add DT support

Add DT support for connector-analog-tv.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../omap2/displays-new/connector-analog-tv.c  | 43 ++++++++++++++++++-
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/omap2/displays-new/connector-analog-tv.c
index ccd9073f706f6d..5c840325def4b3 100644
--- a/drivers/video/omap2/displays-new/connector-analog-tv.c
+++ b/drivers/video/omap2/displays-new/connector-analog-tv.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -42,6 +43,12 @@ static const struct omap_video_timings tvc_pal_timings = {
 	.interlace	= true,
 };
 
+static const struct of_device_id tvc_of_match[];
+
+struct tvc_of_data {
+	enum omap_dss_venc_type connector_type;
+};
+
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
 
 static int tvc_connect(struct omap_dss_device *dssdev)
@@ -91,8 +98,12 @@ static int tvc_enable(struct omap_dss_device *dssdev)
 
 	in->ops.atv->set_timings(in, &ddata->timings);
 
-	in->ops.atv->set_type(in, ddata->connector_type);
-	in->ops.atv->invert_vid_out_polarity(in, ddata->invert_polarity);
+	if (!ddata->dev->of_node) {
+		in->ops.atv->set_type(in, ddata->connector_type);
+
+		in->ops.atv->invert_vid_out_polarity(in,
+			ddata->invert_polarity);
+	}
 
 	r = in->ops.atv->enable(in);
 	if (r)
@@ -205,6 +216,23 @@ static int tvc_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int tvc_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tvc_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -222,6 +250,10 @@ static int tvc_probe(struct platform_device *pdev)
 		r = tvc_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = tvc_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -263,12 +295,19 @@ static int __exit tvc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id tvc_of_match[] = {
+	{ .compatible = "omapdss,svideo-connector", },
+	{ .compatible = "omapdss,composite-video-connector", },
+	{},
+};
+
 static struct platform_driver tvc_connector_driver = {
 	.probe	= tvc_probe,
 	.remove	= __exit_p(tvc_remove),
 	.driver	= {
 		.name	= "connector-analog-tv",
 		.owner	= THIS_MODULE,
+		.of_match_table = tvc_of_match,
 	},
 };
 

From 6e7efe4eb86e493ea10d1568a6497aa931ff5221 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Fri, 13 Dec 2013 19:17:28 +0100
Subject: [PATCH 28/45] OMAPDSS: acx565akm: Add DT support

Add DT support for panel-sony-acx565akm

Signed-off-by: Sebastian Reichel <sre@debian.org>
[tomi.valkeinen@ti.com: some modifications]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../omap2/displays-new/panel-sony-acx565akm.c | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
index 8e97d06921ffdf..906220c2018671 100644
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
@@ -30,6 +30,8 @@
 #include <linux/backlight.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -547,7 +549,9 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
 
 	in->ops.sdi->set_timings(in, &ddata->videomode);
-	in->ops.sdi->set_datapairs(in, ddata->datapairs);
+
+	if (ddata->datapairs > 0)
+		in->ops.sdi->set_datapairs(in, ddata->datapairs);
 
 	r = in->ops.sdi->enable(in);
 	if (r) {
@@ -726,6 +730,22 @@ static int acx565akm_probe_pdata(struct spi_device *spi)
 	return 0;
 }
 
+static int acx565akm_probe_of(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct device_node *np = spi->dev.of_node;
+
+	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
+
+	ddata->in = omapdss_of_find_source_for_first_ep(np);
+	if (IS_ERR(ddata->in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(ddata->in);
+	}
+
+	return 0;
+}
+
 static int acx565akm_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -753,7 +773,12 @@ static int acx565akm_probe(struct spi_device *spi)
 		r = acx565akm_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = acx565akm_probe_of(spi);
+		if (r)
+			return r;
 	} else {
+		dev_err(&spi->dev, "platform data missing!\n");
 		return -ENODEV;
 	}
 
@@ -864,10 +889,16 @@ static int acx565akm_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id acx565akm_of_match[] = {
+	{ .compatible = "omapdss,sony,acx565akm", },
+	{},
+};
+
 static struct spi_driver acx565akm_driver = {
 	.driver = {
 		.name	= "acx565akm",
 		.owner	= THIS_MODULE,
+		.of_match_table = acx565akm_of_match,
 	},
 	.probe	= acx565akm_probe,
 	.remove	= acx565akm_remove,

From cbab579bf8e2bc36a0e74bc11066660b6776493f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:12:12 +0200
Subject: [PATCH 29/45] Doc/DT: Add DT binding documentation for OMAP DSS

Add device tree bindings for OMAP Display Subsystem for the following
SoCs: OMAP2, OMAP3, OMAP4.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../devicetree/bindings/video/ti,omap-dss.txt | 211 ++++++++++++++++++
 .../bindings/video/ti,omap2-dss.txt           |  54 +++++
 .../bindings/video/ti,omap3-dss.txt           |  83 +++++++
 .../bindings/video/ti,omap4-dss.txt           | 111 +++++++++
 4 files changed, 459 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,omap-dss.txt
 create mode 100644 Documentation/devicetree/bindings/video/ti,omap2-dss.txt
 create mode 100644 Documentation/devicetree/bindings/video/ti,omap3-dss.txt
 create mode 100644 Documentation/devicetree/bindings/video/ti,omap4-dss.txt

diff --git a/Documentation/devicetree/bindings/video/ti,omap-dss.txt b/Documentation/devicetree/bindings/video/ti,omap-dss.txt
new file mode 100644
index 00000000000000..d5f1a3fe31092b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap-dss.txt
@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/video/video-
+ports.txt, and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+	compatible = "ti,omap4-dss";
+	reg = <0x58000000 0x80>;
+	status = "disabled";
+	ti,hwmods = "dss_core";
+	clocks = <&dss_dss_clk>;
+	clock-names = "fck";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	dispc@58001000 {
+		compatible = "ti,omap4-dispc";
+		reg = <0x58001000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "dss_dispc";
+		clocks = <&dss_dss_clk>;
+		clock-names = "fck";
+	};
+
+	hdmi: encoder@58006000 {
+		compatible = "ti,omap4-hdmi";
+		reg = <0x58006000 0x200>,
+		      <0x58006200 0x100>,
+		      <0x58006300 0x100>,
+		      <0x58006400 0x1000>;
+		reg-names = "wp", "pll", "phy", "core";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+		ti,hwmods = "dss_hdmi";
+		clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+		clock-names = "fck", "sys_clk";
+	};
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/ti,omap2-dss.txt b/Documentation/devicetree/bindings/video/ti,omap2-dss.txt
new file mode 100644
index 00000000000000..fa8bb2ed117083
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap2-dss.txt
@@ -0,0 +1,54 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
diff --git a/Documentation/devicetree/bindings/video/ti,omap3-dss.txt b/Documentation/devicetree/bindings/video/ti,omap3-dss.txt
new file mode 100644
index 00000000000000..0023fa4b13288f
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap3-dss.txt
@@ -0,0 +1,83 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+	- Port 0: DPI output
+	- Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
diff --git a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
new file mode 100644
index 00000000000000..f85d6fcfa7052b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
@@ -0,0 +1,111 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output

From 7c572d5eb6f33b059d0b55c842fbb1221502669c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 20 Aug 2012 17:07:31 +0300
Subject: [PATCH 30/45] ARM: omap4-sdp.dts: add display information

Add DT data for OMAP4 SDP board. The board has the following displays:

lcd0: a command mode DSI panel connected to OMAP DSI1 encoder
lcd1: a command mode DSI panel connected to OMAP DSI2 encoder
hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4-sdp.dts | 113 ++++++++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 9bbbbec1d63d83..48983c8d56c22f 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -19,6 +19,12 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	aliases {
+		display0 = &lcd0;
+		display1 = &lcd1;
+		display2 = &hdmi0;
+	};
+
 	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
@@ -153,6 +159,48 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap4_pmx_core {
@@ -569,3 +617,68 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&dss {
+	status = "ok";
+};
+
+&dsi1 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd0";
+
+		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi2_out_ep: endpoint {
+			remote-endpoint = <&lcd1_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd1: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd1";
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
+
+		port {
+			lcd1_in: endpoint {
+				remote-endpoint = <&dsi2_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};

From 8cecf52befd73c7488fe3ced2f1a1eb5e5bffe2e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 22 Mar 2013 10:48:36 +0200
Subject: [PATCH 31/45] ARM: omap3-beagle.dts: add display information

Add DT data for OMAP3 Beagle board. The board has the following displays:

dvi: uses TFP410 encoder to convert DPI to DVI
tv: analog svideo

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-beagle.dts | 135 +++++++++++++++++++++++++++++
 1 file changed, 135 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index d01e9a76c5da0c..3c3e6da1deacda 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -24,6 +24,11 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pmu_stat {
@@ -80,6 +85,61 @@
 		};
 
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_wkup {
@@ -113,6 +173,45 @@
 			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -152,6 +251,10 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
@@ -215,3 +318,35 @@
 &mcbsp2 {
 	status = "okay";
 };
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};

From 9955a9e5bd5d7a78fc261e2b466549be5ee845c1 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 20 Sep 2013 10:43:51 +0300
Subject: [PATCH 32/45] ARM: omap3-beagle-xm.dts: add display information

Add DT data for OMAP3 Beagle-xM board. The board has the following displays:

dvi: uses TFP410 encoder to convert DPI to DVI
tv: analog svideo

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-beagle-xm.dts | 138 ++++++++++++++++++++++++--
 1 file changed, 129 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index cba3570238783e..cf0be662297e96 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -24,6 +24,11 @@
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -86,6 +91,60 @@
 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+		/* XXX pinctrl from twl */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_wkup {
@@ -94,6 +153,17 @@
 			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
 		>;
 	};
+
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
 };
 
 &omap3_pmx_core {
@@ -119,6 +189,35 @@
 			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
 		>;
 	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -164,15 +263,6 @@
 
 &i2c3 {
 	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
 };
 
 &mmc1 {
@@ -238,3 +328,33 @@
 &mcbsp2 {
 	status = "okay";
 };
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};

From dd186aa5a06ca50c8fbec06cb2d2ee8aa7b17443 Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Date: Fri, 6 Dec 2013 02:53:38 +0100
Subject: [PATCH 33/45] ARM: omap3-igep0020.dts: add display information

Add DT data for OMAP3 IGEPv2 board. The board has the following displays:

dvi: uses TFP410 encoder to convert DPI to DVI

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-igep0020.dts | 58 ++++++++++++++++++++++++++--
 1 file changed, 55 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 25a2b5f652fd19..8aa4ded8ce0324 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -61,22 +61,63 @@
 		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
 		vcc-supply = <&hsusb1_power>;
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
 		&tfp410_pins
-		&dss_pins
+		&dss_dpi_pins
 	>;
 
-	tfp410_pins: tfp410_dvi_pins {
+	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
 			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
 		>;
 	};
 
-	dss_pins: pinmux_dss_dvi_pins {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
 			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -226,3 +267,14 @@
         /* Needed for DSS */
         regulator-name = "vdds_dsi";
 };
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};

From 1133420fe1a05789b1566f3e49f9d2e66703b93f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 17 Dec 2013 09:33:33 +0200
Subject: [PATCH 34/45] ARM: omap3-n900.dts: add display information

Add DT data for OMAP3 N900 board. The board has the following displays:

lcd: LCD panel connected to OMAP's SDI output
tv: analog svideo

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sre@debian.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 77 ++++++++++++++++++++++++++++++--
 1 file changed, 73 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 64aa416ee4c106..6311393bf5a930 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -79,6 +79,17 @@
 		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 		usb-phy = <&usb2_phy>;
 	};
+
+	tv: connector {
+		compatible = "composite-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_core {
@@ -145,11 +156,23 @@
 		>;
 	};
 
-	display_pins: pinmux_display_pins {
+	acx565akm_pins: pinmux_acx565akm_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
+
+	dss_sdi_pins: pinmux_dss_sdi_pins {
+		pinctrl-single,pins = <
+			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+
+			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+		>;
+	};
 };
 
 &i2c1 {
@@ -561,13 +584,23 @@
 		spi-max-frequency = <6000000>;
 		reg = <0>;
 	};
-	mipid@2 {
-		compatible = "acx565akm";
+
+	acx565akm@2 {
+		compatible = "sony,acx565akm";
 		spi-max-frequency = <6000000>;
 		reg = <2>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&display_pins>;
+		pinctrl-0 = <&acx565akm_pins>;
+
+		label = "lcd";
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&sdi_out>;
+			};
+		};
 	};
 };
 
@@ -593,3 +626,39 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_sdi_pins>;
+
+	vdds_sdi-supply = <&vaux1>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			sdi_out: endpoint {
+				remote-endpoint = <&lcd_in>;
+				datapairs = <2>;
+			};
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <1>;
+		};
+	};
+};

From 07b6565febbfcfde72450de56123a16333220cd6 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:08 +0200
Subject: [PATCH 35/45] Doc/DT: Add DT binding documentation for Analog TV
 Connector

Add DT binding documentation for Analog TV Connector.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 .../bindings/video/analog-tv-connector.txt    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/analog-tv-connector.txt

diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
new file mode 100644
index 00000000000000..0218fcdc12994e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
@@ -0,0 +1,25 @@
+Analog TV Connector
+===================
+
+Required properties:
+- compatible: "composite-connector" or "svideo-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for TV input
+
+Example
+-------
+
+tv: connector {
+	compatible = "composite-connector";
+	label = "tv";
+
+	port {
+		tv_connector_in: endpoint {
+			remote-endpoint = <&venc_out>;
+		};
+	};
+};

From b987faded04f3ca45aa6eddd879d1f4a6e919c96 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:08 +0200
Subject: [PATCH 36/45] Doc/DT: Add DT binding documentation for DVI Connector

Add DT binding documentation for DVI Connector.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 .../bindings/video/dvi-connector.txt          | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/dvi-connector.txt

diff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt b/Documentation/devicetree/bindings/video/dvi-connector.txt
new file mode 100644
index 00000000000000..fc53f7c60bc65e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dvi-connector.txt
@@ -0,0 +1,35 @@
+DVI Connector
+==============
+
+Required properties:
+- compatible: "dvi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link
+
+Required nodes:
+- Video port for DVI input
+
+Note: One (or both) of 'analog' or 'digital' must be set.
+
+Example
+-------
+
+dvi0: connector@0 {
+	compatible = "dvi-connector";
+	label = "dvi";
+
+	digital;
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		dvi_connector_in: endpoint {
+			remote-endpoint = <&tfp410_out>;
+		};
+	};
+};

From e684175eda8fc03ace06e110136baa7c7734a484 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:08 +0200
Subject: [PATCH 37/45] Doc/DT: Add DT binding documentation for HDMI Connector

Add DT binding documentation for HDMI Connector.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 .../bindings/video/hdmi-connector.txt         | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/hdmi-connector.txt

diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
new file mode 100644
index 00000000000000..ccccc19e2573b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
@@ -0,0 +1,28 @@
+HDMI Connector
+==============
+
+Required properties:
+- compatible: "hdmi-connector"
+- type: the HDMI connector type: "a", "b", "c", "d" or "e"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for HDMI input
+
+Example
+-------
+
+hdmi0: connector@1 {
+	compatible = "hdmi-connector";
+	label = "hdmi";
+
+	type = "a";
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&tpd12s015_out>;
+		};
+	};
+};

From e433333b6999aa105a35d1ea1ce03db6b025d931 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:08 +0200
Subject: [PATCH 38/45] Doc/DT: Add DT binding documentation for MIPI DSI CM
 Panel

Add DT binding documentation for MIPI DSI Command Mode Panel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 .../bindings/video/panel-dsi-cm.txt           | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/panel-dsi-cm.txt

diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
new file mode 100644
index 00000000000000..dce48eb9db57ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
@@ -0,0 +1,29 @@
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+- te-gpios: panel TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+	compatible = "tpo,taal", "panel-dsi-cm";
+	label = "lcd0";
+
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd0_in: endpoint {
+			remote-endpoint = <&dsi1_out_ep>;
+		};
+	};
+};

From 32f20cce0a780592444fe6912bfe23659cd49fe9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:09 +0200
Subject: [PATCH 39/45] Doc/DT: Add DT binding documentation for Sony acx565akm
 panel

Add DT binding documentation for Sony acx565akm panel

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 .../bindings/video/sony,acx565akm.txt         | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/sony,acx565akm.txt

diff --git a/Documentation/devicetree/bindings/video/sony,acx565akm.txt b/Documentation/devicetree/bindings/video/sony,acx565akm.txt
new file mode 100644
index 00000000000000..e1233328074965
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/sony,acx565akm.txt
@@ -0,0 +1,30 @@
+Sony ACX565AKM SDI Panel
+========================
+
+Required properties:
+- compatible: "sony,acx565akm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+
+Required nodes:
+- Video port for SDI input
+
+Example
+-------
+
+acx565akm@2 {
+	compatible = "sony,acx565akm";
+	spi-max-frequency = <6000000>;
+	reg = <2>;
+
+	label = "lcd";
+	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&sdi_out>;
+		};
+	};
+};

From be2868ee1ba7399de427a0838ab7ba4442b3d544 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:09 +0200
Subject: [PATCH 40/45] Doc/DT: Add DT binding documentation for TFP410 encoder

Add DT binding documentation for TFP410 encoder

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 .../devicetree/bindings/video/ti,tfp410.txt   | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,tfp410.txt

diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt
new file mode 100644
index 00000000000000..2cbe32a3d0bb67
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt
@@ -0,0 +1,41 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+
+Required nodes:
+- Video port 0 for DPI input
+- Video port 1 for DVI output
+
+Example
+-------
+
+tfp410: encoder@0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint@0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint@0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};

From c86907b59f505863ec7839471e889330982a596e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 21 Jan 2014 11:17:09 +0200
Subject: [PATCH 41/45] Doc/DT: Add DT binding documentation for tpd12s015
 encoder

Add DT binding documentation for tpd12s015 encoder

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../bindings/video/ti,tpd12s015.txt           | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,tpd12s015.txt

diff --git a/Documentation/devicetree/bindings/video/ti,tpd12s015.txt b/Documentation/devicetree/bindings/video/ti,tpd12s015.txt
new file mode 100644
index 00000000000000..26e6d32e3f2052
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,tpd12s015.txt
@@ -0,0 +1,44 @@
+TPD12S015 HDMI level shifter and ESD protection chip
+====================================================
+
+Required properties:
+- compatible: "ti,tpd12s015"
+
+Optional properties:
+- gpios: CT CP HPD, LS OE and HPD gpios
+
+Required nodes:
+- Video port 0 for HDMI input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+tpd12s015: encoder@1 {
+	compatible = "ti,tpd12s015";
+
+	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+		<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+		<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tpd12s015_in: endpoint@0 {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tpd12s015_out: endpoint@0 {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};

From 931d4bd664786f5a3b1ea83f84ba9d455e341c9b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 10 Jun 2013 14:05:10 +0300
Subject: [PATCH 42/45] OMAPDSS: remove DT hacks for regulators

For booting Panda and 4430SDP with DT, while DSS did not support DT, we
had to had small hacks in the omapdss driver to get the regulators. With
DT now supported in DSS, we can remove those hacks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c   | 11 ++---------
 drivers/video/omap2/dss/hdmi4.c | 11 ++---------
 2 files changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index f3e4e468b49aad..121d1049d0bc3d 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1160,18 +1160,11 @@ static int dsi_regulator_init(struct platform_device *dsidev)
 	if (dsi->vdds_dsi_reg != NULL)
 		return 0;
 
-	if (dsi->pdev->dev.of_node)
-		vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdd");
-	else
-		vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdds_dsi");
-
-	/* DT HACK: try VCXIO to make omapdss work for o4 sdp/panda */
-	if (IS_ERR(vdds_dsi))
-		vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "VCXIO");
+	vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdd");
 
 	if (IS_ERR(vdds_dsi)) {
 		if (PTR_ERR(vdds_dsi) != -EPROBE_DEFER)
-			DSSERR("can't get VDDS_DSI regulator\n");
+			DSSERR("can't get DSI VDD regulator\n");
 		return PTR_ERR(vdds_dsi);
 	}
 
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/omap2/dss/hdmi4.c
index e9c3d9e6d450a7..f5f7944a1fd1d6 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/omap2/dss/hdmi4.c
@@ -88,18 +88,11 @@ static int hdmi_init_regulator(void)
 	if (hdmi.vdda_hdmi_dac_reg != NULL)
 		return 0;
 
-	if (hdmi.pdev->dev.of_node)
-		reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
-	else
-		reg = devm_regulator_get(&hdmi.pdev->dev, "vdda_hdmi_dac");
-
-	/* DT HACK: try VDAC to make omapdss work for o4 sdp/panda */
-	if (IS_ERR(reg))
-		reg = devm_regulator_get(&hdmi.pdev->dev, "VDAC");
+	reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
 
 	if (IS_ERR(reg)) {
 		if (PTR_ERR(reg) != -EPROBE_DEFER)
-			DSSERR("can't get VDDA_HDMI_DAC regulator\n");
+			DSSERR("can't get VDDA regulator\n");
 		return PTR_ERR(reg);
 	}
 

From b4f889208ffbd425ff1cb9ddcaf8483a3b91cd6a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 18 Dec 2013 10:34:32 +0200
Subject: [PATCH 43/45] ARM: OMAP2+: remove pdata quirks for displays

Remove pdata quirks for the displays on boards that are now supported
properly with DT.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/dss-common.c   | 240 -----------------------------
 arch/arm/mach-omap2/pdata-quirks.c |   3 -
 2 files changed, 243 deletions(-)

diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index ab8cf26d50963f..ea2be0f5953b53 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -35,243 +35,3 @@
 #include "mux.h"
 #include "display.h"
 
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
-
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 2,
-};
-
-static struct platform_device omap4_panda_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap4_panda_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_tfp410_pdata,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
-	.name                   = "hdmi",
-	.source                 = "tpd12s015.0",
-};
-
-static struct platform_device omap4_panda_hdmi_connector_device = {
-	.name                   = "connector-hdmi",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
-	.name                   = "tpd12s015.0",
-	.source                 = "hdmi.0",
-
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device omap4_panda_tpd_device = {
-	.name                   = "tpd12s015",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_tpd_pdata,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
-	.default_display_name = "dvi",
-};
-
-void __init omap4_panda_display_init_of(void)
-{
-	struct device_node *node;
-
-	node = omapdss_find_dss_of_node();
-	if (node && of_device_is_available(node))
-		return;
-
-	omap_display_init(&omap4_panda_dss_data);
-
-	platform_device_register(&omap4_panda_tfp410_device);
-	platform_device_register(&omap4_panda_dvi_connector_device);
-
-	platform_device_register(&omap4_panda_tpd_device);
-	platform_device_register(&omap4_panda_hdmi_connector_device);
-}
-
-
-/* OMAP4 Blaze display data */
-
-#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO	40
-
-static struct panel_dsicm_platform_data dsi1_panel = {
-	.name		= "lcd",
-	.source		= "dsi.0",
-	.reset_gpio	= 102,
-	.use_ext_te	= false,
-	.ext_te_gpio	= 101,
-	.pin_config = {
-		.num_pins	= 6,
-		.pins		= { 0, 1, 2, 3, 4, 5 },
-	},
-};
-
-static struct platform_device sdp4430_lcd_device = {
-	.name                   = "panel-dsi-cm",
-	.id                     = 0,
-	.dev.platform_data	= &dsi1_panel,
-};
-
-static struct panel_dsicm_platform_data dsi2_panel = {
-	.name		= "lcd2",
-	.source		= "dsi.1",
-	.reset_gpio	= 104,
-	.use_ext_te	= false,
-	.ext_te_gpio	= 103,
-	.pin_config = {
-		.num_pins	= 6,
-		.pins		= { 0, 1, 2, 3, 4, 5 },
-	},
-};
-
-static struct platform_device sdp4430_lcd2_device = {
-	.name                   = "panel-dsi-cm",
-	.id                     = 1,
-	.dev.platform_data	= &dsi2_panel,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
-	.name                   = "hdmi",
-	.source                 = "tpd12s015.0",
-};
-
-static struct platform_device sdp4430_hdmi_connector_device = {
-	.name                   = "connector-hdmi",
-	.id                     = 0,
-	.dev.platform_data      = &sdp4430_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
-	.name                   = "tpd12s015.0",
-	.source                 = "hdmi.0",
-
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device sdp4430_tpd_device = {
-	.name                   = "tpd12s015",
-	.id                     = 0,
-	.dev.platform_data      = &sdp4430_tpd_pdata,
-};
-
-
-static struct omap_dss_board_info sdp4430_dss_data = {
-	.default_display_name = "lcd",
-};
-
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
-void __init omap_4430sdp_display_init_of(void)
-{
-	int r;
-	struct device_node *node;
-
-	node = omapdss_find_dss_of_node();
-	if (node && of_device_is_available(node))
-		return;
-
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
-	omap_display_init(&sdp4430_dss_data);
-
-	platform_device_register(&sdp4430_lcd_device);
-	platform_device_register(&sdp4430_lcd2_device);
-
-	platform_device_register(&sdp4430_tpd_device);
-	platform_device_register(&sdp4430_hdmi_connector_device);
-}
-
-
-/* OMAP3 IGEPv2 data */
-
-#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO	170
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 2,
-};
-
-static struct platform_device omap3_igep2_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_igep2_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap3_igep2_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_igep2_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
-	.default_display_name = "dvi",
-};
-
-void __init omap3_igep2_display_init_of(void)
-{
-	struct device_node *node;
-
-	node = omapdss_find_dss_of_node();
-	if (node && of_device_is_available(node))
-		return;
-
-	omap_display_init(&igep2_dss_data);
-
-	platform_device_register(&omap3_igep2_tfp410_device);
-	platform_device_register(&omap3_igep2_dvi_connector_device);
-}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index db242c483dc074..b67f987bd09421 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -139,7 +139,6 @@ static void __init omap3_sbc_t3530_legacy_init(void)
 
 static void __init omap3_igep0020_legacy_init(void)
 {
-	omap3_igep2_display_init_of();
 }
 
 static void __init omap3_evm_legacy_init(void)
@@ -229,14 +228,12 @@ static void __init am3517_evm_legacy_init(void)
 #ifdef CONFIG_ARCH_OMAP4
 static void __init omap4_sdp_legacy_init(void)
 {
-	omap_4430sdp_display_init_of();
 	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
 			   WL12XX_TCXOCLOCK_26, 53);
 }
 
 static void __init omap4_panda_legacy_init(void)
 {
-	omap4_panda_display_init_of();
 	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
 }
 #endif

From 5f0bc7a9eec7e562be82b90bffee7a5370d38517 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 20 Mar 2014 11:55:02 +0200
Subject: [PATCH 44/45] OMAPDSS: add missing __init for dss_init_ports

dss_init_ports() is missing __init, so fix that.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 32b4ff0606ab02..825c019ddee768 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -774,7 +774,7 @@ static int __init dss_init_features(struct platform_device *pdev)
 	return 0;
 }
 
-static int dss_init_ports(struct platform_device *pdev)
+static int __init dss_init_ports(struct platform_device *pdev)
 {
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;

From 0f5d9d2e7d234acb26bc98dd820cc8dd178774d6 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 3 Apr 2014 15:48:32 +0300
Subject: [PATCH 45/45] OMAPDSS: HDMI: fix interlace output

The HDMI output video format's yres needs to be divided by two for
interlace. Fix it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi_wp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/video/omap2/dss/hdmi_wp.c b/drivers/video/omap2/dss/hdmi_wp.c
index cd620c6e43a05e..f5f4ccf50d90be 100644
--- a/drivers/video/omap2/dss/hdmi_wp.c
+++ b/drivers/video/omap2/dss/hdmi_wp.c
@@ -171,6 +171,8 @@ void hdmi_wp_init_vid_fmt_timings(struct hdmi_video_format *video_fmt,
 	video_fmt->packing_mode = HDMI_PACK_10b_RGB_YUV444;
 	video_fmt->y_res = param->timings.y_res;
 	video_fmt->x_res = param->timings.x_res;
+	if (param->timings.interlace)
+		video_fmt->y_res /= 2;
 
 	timings->hbp = param->timings.hbp;
 	timings->hfp = param->timings.hfp;