From fe4ffe31d1ba37a71357875075b6a6294d235324 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Thu, 5 May 2022 16:36:47 +0200 Subject: [PATCH] fix: variant declaration - Correct case sensitive issue with filename - Add linker script - Add missing ALTx pin declaration - apply astyle - some clean up --- README.md | 2 +- .../G071C(6-8-B)(T-U)_G081CB(T-U)/ldscript.ld | 185 +++++++++++++++++ ..._agafia_sg0.cpp => variant_AGAFIA_SG0.cpp} | 109 +++++----- .../variant_AGAFIA_SG0.h | 186 ++++++++++++++++++ .../variant_agafia_sg0.h | 167 ---------------- 5 files changed, 426 insertions(+), 223 deletions(-) create mode 100644 variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/ldscript.ld rename variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/{variant_agafia_sg0.cpp => variant_AGAFIA_SG0.cpp} (83%) create mode 100644 variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.h delete mode 100644 variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.h diff --git a/README.md b/README.md index d48841e99b..db8e764b7f 100644 --- a/README.md +++ b/README.md @@ -296,7 +296,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | :green_heart: | STM32G030C6
STM32G030C8 | Generic Board | *2.2.0* | | :green_heart: | STM32G030F6
STM32G030F6 | Generic Board | *2.2.0* | | :green_heart: | STM32G030K8 | [Aurora One](https://www.bfy.kr/aurora-one/) | *2.0.0* | -| :yellow_heart: | STM32G071CB | [AGAFIA SG0](https://www.sigmaic.com/store/p7/agafia-sgo.html) | *2.3.0* | +| :yellow_heart: | STM32G071CB | [AGAFIA SG0](https://www.sigmaic.com/store/p7/agafia-sgo.html) | **2.3.0** | | :green_heart: | STM32G030K6
STM32G030K8 | Generic Board | *2.0.0* | | | :green_heart: | STM32G031J4
STM32G031J6 | Generic Board | *2.0.0* | | | :yellow_heart: | STM32G031F4
STM32G031F6
STM32G031F8 | Generic Board | **2.3.0** | | diff --git a/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/ldscript.ld b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/ldscript.ld new file mode 100644 index 0000000000..e40a21352b --- /dev/null +++ b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/ldscript.ld @@ -0,0 +1,185 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** @brief : Linker script for STM32G071CBTx Device from STM32G0 series +** 128Kbytes FLASH +** 36Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000,+ LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.cpp b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.cpp similarity index 83% rename from variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.cpp rename to variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.cpp index 6df7bc732e..6e79b3e3c2 100644 --- a/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.cpp +++ b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.cpp @@ -27,7 +27,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ - + #if defined(ARDUINO_AGAFIA_SG0) #include "pins_arduino.h" @@ -37,64 +37,63 @@ extern "C" { // Pin number const PinName digitalPin[] = { - PA_10, //D0 - PA_9 , //D1 - PA_12, //D2 - PC_6, //D3 //SPI_CLK - PB_15, //D4 - PB_14, //D5 - PA_8, //D6 - PB_13, //D7 - PC_7, //D8 - PB_3, //D9 - PB_0, //D10 //SPI_CS - PA_7, //D11 //SPI_MOSI - PA_6, //D12 //SPI_MISO - PA_5, //D13 //SPI_CLK - PB_9, //D14 - PB_8, //D15 - - - PA_3, //D16 - PA_2, //D17 - PA_0, //D18 - PA_1, //D19 - - PA_11, //D20 - PA_15, //D21 - PD_0, //D22 - PD_1, //D23 - PD_2, //D24 - PD_3, //D25 - PD_4, //D26 - PB_4, //D27 - PB_5, //D28 - PB_6, //D29 - PB_7, //D30 - - PA_14, //D31 - PA_13, //D32 - - PF_0, //D33 - PF_1, //D34 - PC_13, //D35 - - PA_4, //D36 //A0 //DAC1 - PB_12, //D37 //A1 - PB_11, //D38 //A2 - PB_10, //D39 //A3 - PB_2, //D40 //A4 - PB_1 //D41 //A5 + PA_10, // D0 + PA_9, // D1 + PA_12, // D2 + PC_6, // D3 - SPI_CLK + PB_15, // D4 + PB_14, // D5 + PA_8, // D6 + PB_13, // D7 + PC_7, // D8 + PB_3, // D9 + PB_0, // D10 - SPI_CS + PA_7, // D11 - SPI_MOSI + PA_6, // D12 - PI_MISO + PA_5, // D13 - SPI_CLK + PB_9, // D14 + PB_8, // D15 + + PA_3, // D16 + PA_2, // D17 + PA_0, // D18 + PA_1, // D19 + + PA_11, // D20 + PA_15, // D21 + PD_0, // D22 + PD_1, // D23 + PD_2, // D24 + PD_3, // D25 + PD_4, // D26 + PB_4, // D27 + PB_5, // D28 + PB_6, // D29 + PB_7, // D30 + + PA_14, // D31 + PA_13, // D32 + + PF_0, // D33 + PF_1, // D34 + PC_13, // D35 + + PA_4, // D36/A0 - DAC1 + PB_12, // D37/A1 + PB_11, // D38/A2 + PB_10, // D39/A3 + PB_2, // D40/A4 + PB_1 // D41/A5 }; // Analog (Ax) pin number array const uint32_t analogInputPin[] = { - 36, //A0 - 37, //A1 - 38, //A2 - 39, //A3 - 40, //A4 - 41, //A5 + 36, // A0, PA4 + 37, // A1, PB12 + 38, // A2, PB11 + 39, // A3, PB10 + 40, // A4, PB2 + 41, // A5, PB1 }; diff --git a/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.h b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.h new file mode 100644 index 0000000000..5e7262e257 --- /dev/null +++ b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_AGAFIA_SG0.h @@ -0,0 +1,186 @@ +/* + ******************************************************************************* + * Copyright (c) 2019, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#pragma once + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +#define PA10 0 // UART1_RX +#define PA9 1 // UART1_TX +#define PA12 2 +#define PC6 3 +#define PB15 4 +#define PB14 5 +#define PA8 6 +#define PB13 7 +#define PC7 8 +#define PB3 9 +#define PB0 10 // SPI_CS +#define PA7 11 // SPI_MOSI +#define PA6 12 // SPI_MISO +#define PA5 13 // SPI_CLK +#define PB9 14 // SDA +#define PB8 15 // SCL + +//SERIAL PINS +#define PA3 16 +#define PA2 17 +#define PA0 18 +#define PA1 19 + +//TOP PIN CONN +#define PA11 20 +#define PA15 21 +#define PD0 22 +#define PD1 23 +#define PD2 24 +#define PD3 25 +#define PD4 26 +#define PB4 27 +#define PB5 28 +#define PB6 29 +#define PB7 30 + +#define PA14 31 //SCK-BOOT0 +#define PA13 32 //SWDIO + +#define PF0 33 //LED3 +#define PF1 34 //LED2 +#define PC13 35 //LED1 + +#define PA4 PIN_A0 // A0 +#define PB12 PIN_A1 // A1 +#define PB11 PIN_A2 // A2 +#define PB10 PIN_A3 // A3 +#define PB2 PIN_A4 // A4 +#define PB1 PIN_A5 // A5 + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA15_ALT1 (PA15 | ALT1) +#define PB0_ALT1 (PB0 | ALT1) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB3_ALT1 (PB3 | ALT1) +#define PB6_ALT1 (PB6 | ALT1) +#define PB13_ALT1 (PB13 | ALT1) +#define PB14_ALT1 (PB14 | ALT1) +#define PB15_ALT1 (PB15 | ALT1) +#define PB15_ALT2 (PB15 | ALT2) +#define PC6_ALT1 (PC6 | ALT1) +#define PC7_ALT1 (PC7 | ALT1) + +#define NUM_DIGITAL_PINS 42 +#define NUM_ANALOG_INPUTS 6 + + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PC13 +#endif +#define LED1 LED_BUILTIN +#define LED2 PF0 +#define LED3 PF1 + + +// SPI Definitions +#define PIN_SPI_SS PB0 +#define PIN_SPI_MOSI PA7 +#define PIN_SPI_MISO PA6 +#define PIN_SPI_SCK PA5 + +// I2C Definitions +#define PIN_WIRE_SDA PB9 +#define PIN_WIRE_SCL PB8 + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif + +#define PIN_DAC1 PA4 +#define PIN_DAC2 PA5 + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 101 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA2 +#endif + +// Extra HAL modules +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE SerialLP1 +#endif + diff --git a/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.h b/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.h deleted file mode 100644 index 93056d4338..0000000000 --- a/variants/STM32G0xx/G071C(6-8-B)(T-U)_G081CB(T-U)/variant_agafia_sg0.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#pragma once - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA10 0 // UART1_RX -#define PA9 1 // UART1_TX -#define PA12 2 -#define PC6 3 -#define PB15 4 -#define PB14 5 -#define PA8 6 -#define PB13 7 -#define PC7 8 -#define PB3 9 -#define PB0 10 // SPI_CS -#define PA7 11 // SPI_MOSI -#define PA6 12 // SPI_MISO -#define PA5 13 // SPI_CLK -#define PB9 14 // SDA -#define PB8 15 // SCL - -//SERIAL PINS -#define PA3 16 -#define PA2 17 -#define PA0 18 -#define PA1 19 - -//TOP PIN CONN -#define PA11 20 -#define PA15 21 -#define PD0 22 -#define PD1 23 -#define PD2 24 -#define PD3 25 -#define PD4 26 -#define PB4 27 -#define PB5 28 -#define PB6 29 -#define PB7 30 - -#define PA14 31 //SCK-BOOT0 -#define PA13 32 //SWDIO - -#define PF0 33 //LED3 -#define PF1 34 //LED2 -#define PC13 35 //LED1 - -#define PA4 PIN_A0 // A0 -#define PB12 PIN_A1 // A1 -#define PB11 PIN_A2 // A2 -#define PB10 PIN_A3 // A3 -#define PB2 PIN_A4 // A4 -#define PB1 PIN_A5 // A5 - -// This must be a literal -#define NUM_DIGITAL_PINS 42 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 6 - - -// On-board LED pin number -#ifndef LED_BUILTIN - #define LED_BUILTIN PC13 -#endif -#define LED1 LED_BUILTIN -#define LED2 PF0 -#define LED3 PF1 - - -// SPI Definitions -#define PIN_SPI_SS PB0 -#define PIN_SPI_MOSI PA7 -#define PIN_SPI_MISO PA6 -#define PIN_SPI_SCK PA5 - -// I2C Definitions -#define PIN_WIRE_SDA PB9 -#define PIN_WIRE_SCL PB8 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#ifndef TIMER_TONE - #define TIMER_TONE TIM6 -#endif -#ifndef TIMER_SERVO - #define TIMER_SERVO TIM7 -#endif - -#define PIN_DAC1 PA4 -#define PIN_DAC2 PA5 - -// UART Definitions -#ifndef SERIAL_UART_INSTANCE - #define SERIAL_UART_INSTANCE 101 //Connected to ST-Link -#endif - -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#ifndef PIN_SERIAL_RX - #define PIN_SERIAL_RX PA3 -#endif -#ifndef PIN_SERIAL_TX - #define PIN_SERIAL_TX PA2 -#endif - -// Extra HAL modules -#if !defined(HAL_DAC_MODULE_DISABLED) - #define HAL_DAC_MODULE_ENABLED -#endif - - -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_HARDWARE SerialLP1 -#endif -