diff --git a/doc/autoyast.md b/doc/autoyast.md index c0337cc57a..cf1baf48dc 100644 --- a/doc/autoyast.md +++ b/doc/autoyast.md @@ -152,14 +152,140 @@ even documented in the AutoYaST handbook. ### `networking` The `networking` section in AutoYaST is composed of several sections: `dns`, `interfaces`, -`net-udev`, `routing` and `s390-devices`. Additionally, other elements like `ipv6` or -`keep_install_network` might need some level of support. - -At this point, Agama only supports defining a list of connections that could correspond with the -AutoYaST interfaces list. We might need to extend Agama to support `dns`, `net-udev`, etc. - -About `keep_install_network` and `setup_before_proposal`, we should not implement them to keep -things simple. +`net-udev`, `routing` and `s390-devices`. At this point, Agama only supports defining a list of +connections that could correspond with the AutoYaST interfaces list. We might need to extend Agama +to support `dns`, `net-udev`, etc. + +| AutoYaST | Supported | Agama | Comment | +| ----------------------- | --------- | ----------- | --------------------------------- | +| backend | No | | No plan for additional backends | +| dhcp_options | No | | | +| dns | Partial | | Included in connections | +| interfaces | Partial | connections | Check the connections table below | +| ipv6 | Never | | | +| keep_install_network | Never | | | +| managed | Never | | | +| modules | No | | | +| net-udev | No | | | +| routing | Partial | | Included in connections | +| s390-devices | No | | | +| setup_before_proposal | Never | | | +| strict_IP_check_timeout | Never | | | +| virt_brige_proposal | No | | | + +As seen in the table above, AutoYaST `interfaces` corresponds with Agama `connections`, but the +format is not exactly the same. + +| AutoYaST | Supported | Agama | Comment | +| -------------------------- | ---------- | ---------- | --------------------------------------- | +| device | Yes | interface | | +| name | Yes | id | | +| description | Deprecated | | | +| bootproto | Yes | method4 | | +| startmode | Never | | Do not set up connections you won't use | +| lladdr | Yes | macAddress | | +| ifplugd_priority | Never | | Not relevant (no ifplugd support) | +| usercontrol | Never | | | +| dhclient_set_hostname | No | | | +| ipaddr | Yes | addresses | | +| prefixlen | Yes | addresses | Part of `addresses` | +| remote_ipaddr | No | | | +| netmask | Yes | addresses | Part of `addresses` | +| bonding_* | Yes | bond | Use a different format to define bonds | +| aliases | Yes | | Part of `addresses` | +| broadcast | Deprecated | | Part of `addresses` | +| network | Deprecated | | Part of `addresses` | +| mtu | No | | | +| ethtool_options | No | | | +| wireless | Yes | wireless | It uses a different format | +| wifi_settings | Partial | wireless | It uses a different format | +| bridge_settings | Planned | | | +| vlan_settings | Planned | | | +| dhclient_set_down_link | No | | | +| dhclient_set_default_route | No | | | +| zone | No | | | +| firewall | No | | | + +#### Wireless connections + +Setting up a wireless connection in AutoYaST is not even documented, although it is possible. In +Agama, the options are placed under a `wireless` key. + +| AutoYaST | Supported | Agama | Comment | +| ---------------------------- | --------- | -------- | ----------------------- | +| wireless_auth_mode | Partial | security | Different set of values | +| wireless_ap | No | | | +| wireless_bitrate | No | | | +| wireless_ca_cert | No | | | +| wireless_channel | No | | | +| wireless_client_cert | No | | | +| wireless_client_key | No | | | +| wireless_client_key_password | No | | | +| wireless_default_key | No | | | +| wireless_eap_auth | No | | | +| wireless_eap_mode | No | | | +| wireless_essid | Yes | ssid | | +| wireless_frequency | No | | | +| wireless_key | No | | | +| wireless_key_0 | No | | | +| wireless_key_1 | No | | | +| wireless_key_2 | No | | | +| wireless_key_3 | No | | | +| wireless_key_length | No | | | +| wireless_mode | Partial | mode | Different set of values | +| wireless_nick | No | | | +| wireless_nwid | No | | | +| wireless_peap_version | No | | | +| wireless_power | No | | | +| wireless_wpa_anonid | No | | | +| wireless_wpa_identity | No | | | +| wireless_wpa_password | Yes | password | | +| wireless_wpa_psk | Yes | password | | + +#### Bonding connections + +The AutoYaST `bonding*` elements allow setting up a bonding interface. In Agama, those settings are +placed under a `bond` key in the `connection` structure. + +| AutoYaST | Supported | Agama | Comment | +| ------------------- | --------- | ------- | ----------------------------- | +| bonding_master | Yes | | The master defines the `bond` | +| bonding_slaveX | Yes | ports | | +| bonding_module_opts | Yes | options | | +| - | | mode | Specific key to set the mode | + +Agama includes an specific `mode` options to set the mode, instead of abusing the +`bonding_module_opts`. + +### Bridge connections + +> [!WARNING] +> Bridge support is not implemented yet, although we have support at model level. + +The AutoYaST `bridge*` elements allow setting up a bridge. In Agama, those settings are placed under +a `bridge` key in the `connection` structure. + +| AutoYaST | Supported | Agama | Comment | +| -------------------- | --------- | ------------- | --------------------------------------- | +| bridge | Planned | | An existing `bridge` key means the same | +| bridge_ports | Planned | ports | | +| bridge_stp | Planned | stp | | +| bridge_forward_delay | Planned | forward_delay | | +| bridge_forwarddelay | Planned | forward_delay | Compatibility bsc#1180944 | + +### VLAN + +> [!WARNING] +> VLAN support is not implemented yet, although we have support at model level. + +The AutoYaST `vlan_settings` elements allow setting up a bridge. In Agama, those settings are placed +under a `vlan` key in the `connection` structure. + +| AutoYaST | Supported | Agama | Comment | +| ----------- | --------- | -------- | ------- | +| vlan_id | Planned | id | | +| etherdevice | Planned | parent | | +| - | Planned | protocol | | ### `partitioning`