diff --git a/Detectors/FIT/FT0/base/include/FT0Base/FT0DigParam.h b/Detectors/FIT/FT0/base/include/FT0Base/FT0DigParam.h
index 0a2c7fda8c772..2bf774859aa22 100644
--- a/Detectors/FIT/FT0/base/include/FT0Base/FT0DigParam.h
+++ b/Detectors/FIT/FT0/base/include/FT0Base/FT0DigParam.h
@@ -34,17 +34,17 @@ struct FT0DigParam : o2::conf::ConfigurableParamHelper<FT0DigParam> {
   int mtrg_central_trh = 600.;       // channels
   int mtrg_semicentral_trh = 300.;   // channels
 
-  float mMip_in_V = 7;                        // MIP to mV
-  float mPe_in_mip = 0.004;                   // invserse Np.e. in MIP 1./250.
-  float mCfdShift = 1.66;                     // ns
-  float mCFDShiftPos = 1.47;                  // shift positive part of CFD signal; distance between 0.3 of max amplitude  to max
-  float mCFDdeadTime = 15.6;                  // ns
+  float mMip_in_V = 7;       // MIP to mV
+  float mPe_in_mip = 0.004;  // invserse Np.e. in MIP 1./250.
+  float mCfdShift = 1.66;    // ns
+  float mCFDShiftPos = 1.47; // shift positive part of CFD signal; distance between 0.3 of max amplitude  to max
+  float mCFDdeadTime = 15.6; // ns
   float mCharge2amp = 0.22;
-  float mNoiseVar = 0.1;                      // noise level
-  float mNoisePeriod = 1 / 0.9;               // GHz low frequency noise period;
-  short mTime_trg_gate = 153;                 // #channels as in TCM as in Pilot beams ('OR gate' setting in TCM tab in ControlServer)
-  float mAmpThresholdForReco = 5;             // only channels with amplitude higher will participate in calibration and collision time: 0.3 MIP
-  short mTimeThresholdForReco = 1000;         // only channels with time below will participate in calibration and collision time
+  float mNoiseVar = 0.1;              // noise level
+  float mNoisePeriod = 1 / 0.9;       // GHz low frequency noise period;
+  short mTime_trg_gate = 153;         // #channels as in TCM as in Pilot beams ('OR gate' setting in TCM tab in ControlServer)
+  float mAmpThresholdForReco = 5;     // only channels with amplitude higher will participate in calibration and collision time: 0.3 MIP
+  short mTimeThresholdForReco = 1000; // only channels with time below will participate in calibration and collision time
 
   float mMV_2_Nchannels = 2.2857143;          // amplitude channel 7 mV ->16channels
   float mMV_2_NchannelsInverse = 0.437499997; // inverse amplitude channel 7 mV ->16channels