U-Boot SPL 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500), Build: jenkins- github_Bootloader-Builder-144 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: Model: SeeedStudio BeagleBone Green: BeagleBone Cape EEPROM: no EEPROM at address: 0x54 BeagleBone Cape EEPROM: no EEPROM at address: 0x55 BeagleBone Cape EEPROM: no EEPROM at address: 0x56 BeagleBone Cape EEPROM: no EEPROM at address: 0x57 Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 0 seconds board_name=[BBG1] ... Card did not respond to voltage select! Card did not respond to voltage select! Card did not respond to voltage select! gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! Card did not respond to voltage select! switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2235 bytes read in 13 ms (167 KiB/s) Loaded environment from /boot/uEnv.txt debug: [dtb=/boot/dtbs/4.19.94-ti-r59/am335x-bonegreen-overlay-ni2c2.dtb] ... Using: dtb=/boot/dtbs/4.19.94-ti-r59/am335x-bonegreen-overlay-ni2c2.dtb ... Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.19.94-ti-r59 ... 10162688 bytes read in 661 ms (14.7 MiB/s) debug: [enable_uboot_overlays=] ... loading /boot//boot/dtbs/4.19.94-ti-r59/am335x-bonegreen-overlay-ni2c2.dtb ... uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable... loading /boot/initrd.img-4.19.94-ti-r59 ... 7167732 bytes read in 469 ms (14.6 MiB/s) debug: [console=ttyO0,115200n8 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait c oherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] .. . debug: [bootz 0x82000000 0x88080000:6d5ef4 0x88000000] ... ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree ** Invalid partition 2 ** ** Invalid partition 3 ** ** Invalid partition 4 ** ** Invalid partition 5 ** ** Invalid partition 6 ** ** Invalid partition 7 ** starting USB... USB0: Port not available. cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready musb-hdrc: peripheral reset irq lost! high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-98-84-e3-a4-91-0e cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A80102 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A8010 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A801 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A80 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A8 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0A cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C0 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/C cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/default-arm-am33xx cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/default-arm cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Retrieving file: pxelinux.cfg/default cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.Config file not found starting USB... USB0: Port not available. cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 98:84:e3:a4:91:0e HOST MAC de:ad:be:af:00:00 RNDIS ready high speed config #2: 2 mA, Ethernet Gadget, using RNDIS The remote end did not respond in time.=>