v0.4.1 release aftermath

doc/release-process.md

@@ -1,4 +1,4 @@
-# Release Process
+# Release process
 
 This document outlines the process for releasing versions of the form `$MAJOR.$MINOR.$PATCH`.
 
@@ -14,31 +14,30 @@ This process also assumes that there will be no minor releases for old major rel
 
 We aim to cut a regular release every 3-4 months, approximately twice as frequent as major Bitcoin Core releases. Every second release should be published one month before the feature freeze of the next major Bitcoin Core release, allowing sufficient time to update the library in Core.
 
-## Sanity Checks
-Perform these checks before creating a release:
+## Sanity checks
+Perform these checks when reviewing the release PR (see below):
 
 1. Ensure `make distcheck` doesn't fail.
-```shell
-./autogen.sh && ./configure --enable-dev-mode && make distcheck
-```
+   ```shell
+   ./autogen.sh && ./configure --enable-dev-mode && make distcheck
+   ```
 2. Check installation with autotools:
-```shell
-dir=$(mktemp -d)
-./autogen.sh && ./configure --prefix=$dir && make clean && make install && ls -RlAh $dir
-gcc -o ecdsa examples/ecdsa.c $(PKG_CONFIG_PATH=$dir/lib/pkgconfig pkg-config --cflags --libs libsecp256k1) -Wl,-rpath,"$dir/lib" && ./ecdsa
-```
+   ```shell
+   dir=$(mktemp -d)
+   ./autogen.sh && ./configure --prefix=$dir && make clean && make install && ls -RlAh $dir
+   gcc -o ecdsa examples/ecdsa.c $(PKG_CONFIG_PATH=$dir/lib/pkgconfig pkg-config --cflags --libs libsecp256k1) -Wl,-rpath,"$dir/lib" && ./ecdsa
+   ```
 3. Check installation with CMake:
-```shell
-dir=$(mktemp -d)
-build=$(mktemp -d)
-cmake -B $build -DCMAKE_INSTALL_PREFIX=$dir && cmake --build $build --target install && ls -RlAh $dir
-gcc -o ecdsa examples/ecdsa.c -I $dir/include -L $dir/lib*/ -l secp256k1 -Wl,-rpath,"$dir/lib",-rpath,"$dir/lib64" && ./ecdsa
-```
-4. Use the [`check-abi.sh`](/tools/check-abi.sh) tool to ensure there are no unexpected ABI incompatibilities and that the version number and release notes accurately reflect all potential ABI changes. To run this tool, the `abi-dumper` and `abi-compliance-checker` packages are required.
-
-```shell
-tools/check-abi.sh
-```
+   ```shell
+   dir=$(mktemp -d)
+   build=$(mktemp -d)
+   cmake -B $build -DCMAKE_INSTALL_PREFIX=$dir && cmake --build $build --target install && ls -RlAh $dir
+   gcc -o ecdsa examples/ecdsa.c -I $dir/include -L $dir/lib*/ -l secp256k1 -Wl,-rpath,"$dir/lib",-rpath,"$dir/lib64" && ./ecdsa
+   ```
+4. Use the [`check-abi.sh`](/tools/check-abi.sh) tool to verify that there are no unexpected ABI incompatibilities and that the version number and the release notes accurately reflect all potential ABI changes. To run this tool, the `abi-dumper` and `abi-compliance-checker` packages are required.
+   ```shell
+   tools/check-abi.sh
+   ```
 
 ## Regular release
 
@@ -47,47 +46,48 @@ tools/check-abi.sh
        * adding a section for the release (make sure that the version number is a link to a diff between the previous and new version),
        * removing the `[Unreleased]` section header, and
        * including an entry for `### ABI Compatibility` if it doesn't exist,
-   * sets `_PKG_VERSION_IS_RELEASE` to `true` in `configure.ac`, and
-   * if this is not a patch release
-       * updates `_PKG_VERSION_*` and `_LIB_VERSION_*`  in `configure.ac` and
+   * sets `_PKG_VERSION_IS_RELEASE` to `true` in `configure.ac`, and,
+   * if this is not a patch release,
+       * updates `_PKG_VERSION_*` and `_LIB_VERSION_*`  in `configure.ac`, and
        * updates `project(libsecp256k1 VERSION ...)` and `${PROJECT_NAME}_LIB_VERSION_*` in `CMakeLists.txt`.
-2. After the PR is merged, tag the commit and push it:
+2. Perform the [sanity checks](#sanity-checks) on the PR branch.
+3. After the PR is merged, tag the commit, and push the tag:
    ```
    RELEASE_COMMIT=<merge commit of step 1>
    git tag -s v$MAJOR.$MINOR.$PATCH -m "libsecp256k1 $MAJOR.$MINOR.$PATCH" $RELEASE_COMMIT
    git push git@github.com:bitcoin-core/secp256k1.git v$MAJOR.$MINOR.$PATCH
    ```
-3. Open a PR to the master branch with a commit (using message `"release cleanup: bump version after $MAJOR.$MINOR.$PATCH"`, for example) that
+4. Open a PR to the master branch with a commit (using message `"release cleanup: bump version after $MAJOR.$MINOR.$PATCH"`, for example) that
    * sets `_PKG_VERSION_IS_RELEASE` to `false` and increments `_PKG_VERSION_PATCH` and `_LIB_VERSION_REVISION` in `configure.ac`,
    * increments the `$PATCH` component of `project(libsecp256k1 VERSION ...)` and `${PROJECT_NAME}_LIB_VERSION_REVISION` in `CMakeLists.txt`, and
    * adds an `[Unreleased]` section header to the [CHANGELOG.md](../CHANGELOG.md).
 
    If other maintainers are not present to approve the PR, it can be merged without ACKs.
-4. Create a new GitHub release with a link to the corresponding entry in [CHANGELOG.md](../CHANGELOG.md).
+5. Create a new GitHub release with a link to the corresponding entry in [CHANGELOG.md](../CHANGELOG.md).
+6. Send an announcement email to the bitcoin-dev mailing list.
 
 ## Maintenance release
 
-Note that bugfixes only need to be backported to releases for which no compatible release without the bug exists.
+Note that bug fixes need to be backported only to releases for which no compatible release without the bug exists.
 
 1. If there's no maintenance branch `$MAJOR.$MINOR`, create one:
    ```
    git checkout -b $MAJOR.$MINOR v$MAJOR.$MINOR.$((PATCH - 1))
    git push git@github.com:bitcoin-core/secp256k1.git $MAJOR.$MINOR
    ```
 2. Open a pull request to the `$MAJOR.$MINOR` branch that
-   * includes the bugfixes,
+   * includes the bug fixes,
    * finalizes the release notes similar to a regular release,
    * increments `_PKG_VERSION_PATCH` and `_LIB_VERSION_REVISION` in `configure.ac`
      and the `$PATCH` component of `project(libsecp256k1 VERSION ...)` and `${PROJECT_NAME}_LIB_VERSION_REVISION` in `CMakeLists.txt`
      (with commit message `"release: bump versions for $MAJOR.$MINOR.$PATCH"`, for example).
-3. After the PRs are merged, update the release branch and tag the commit:
+3. Perform the [sanity checks](#sanity-checks) on the PR branch.
+4. After the PRs are merged, update the release branch, tag the commit, and push the tag:
    ```
    git checkout $MAJOR.$MINOR && git pull
    git tag -s v$MAJOR.$MINOR.$PATCH -m "libsecp256k1 $MAJOR.$MINOR.$PATCH"
-   ```
-4. Push tag:
-   ```
    git push git@github.com:bitcoin-core/secp256k1.git v$MAJOR.$MINOR.$PATCH
    ```
-5. Create a new GitHub release with a link to the corresponding entry in [CHANGELOG.md](../CHANGELOG.md).
-6. Open PR to the master branch that includes a commit (with commit message `"release notes: add $MAJOR.$MINOR.$PATCH"`, for example) that adds release notes to [CHANGELOG.md](../CHANGELOG.md).
+6. Create a new GitHub release with a link to the corresponding entry in [CHANGELOG.md](../CHANGELOG.md).
+7. Send an announcement email to the bitcoin-dev mailing list.
+8. Open PR to the master branch that includes a commit (with commit message `"release notes: add $MAJOR.$MINOR.$PATCH"`, for example) that adds release notes to [CHANGELOG.md](../CHANGELOG.md).

tools/check-abi.sh

@@ -3,17 +3,19 @@
 set -eu
 
 default_base_version="$(git describe --match "v*.*.*" --abbrev=0)"
-default_new_version="master"
+default_new_version="HEAD"
 
 display_help_and_exit() {
-    echo "Usage: $0 <base_ver> <new_ver>"
+    echo "Usage: $0 [<base_ver> [<new_ver>]]"
     echo ""
     echo "Description: This script uses the ABI Compliance Checker tool to determine if the ABI"
     echo "             of a new version of libsecp256k1 has changed in a backward-incompatible way."
     echo ""
     echo "Options:"
-    echo "  base_ver      Specify the base version (default: $default_base_version)"
-    echo "  new_ver       Specify the new version (default: $default_new_version)"
+    echo "  base_ver      Specify the base version as a git commit-ish"
+    echo "                  (default: most recent reachable tag matching \"v.*.*\", currently \"$default_base_version\")"
+    echo "  new_ver       Specify the new version as a git commit-ish"
+    echo "                  (default: $default_new_version)"
     echo "  -h, --help    Display this help message"
     exit 0
 }
@@ -23,17 +25,20 @@ if [ "$#" -eq 0 ]; then
     new_version="$default_new_version"
 elif [ "$#" -eq 1 ] && { [ "$1" = "-h" ] || [ "$1" = "--help" ]; }; then
     display_help_and_exit
-elif [ "$#" -eq 2 ]; then
+elif [ "$#" -eq 1 ] || [ "$#" -eq 2 ]; then
     base_version="$1"
-    new_version="$2"
+    if [ "$#" -eq 2 ]; then
+        new_version="$2"
+    fi
 else
     echo "Invalid usage. See help:"
     echo ""
     display_help_and_exit
 fi
 
 checkout_and_build() {
-    git worktree add -d "$1" "$2"
+    _orig_dir="$(pwd)"
+    git worktree add --detach "$1" "$2"
     cd "$1"
     mkdir build && cd build
     cmake -S .. --preset dev-mode \
@@ -45,20 +50,18 @@ checkout_and_build() {
         -DSECP256K1_BUILD_EXAMPLES=OFF
     cmake --build . -j "$(nproc)"
     abi-dumper src/libsecp256k1.so -o ABI.dump -lver "$2"
+    cd "$_orig_dir"
 }
 
 echo "Comparing $base_version (base version) to $new_version (new version)"
 echo
 
-original_dir="$(pwd)"
-
-base_source_dir=$(mktemp -d)
+base_source_dir="$(mktemp -d)"
 checkout_and_build "$base_source_dir" "$base_version"
 
-new_source_dir=$(mktemp -d)
+new_source_dir="$(mktemp -d)"
 checkout_and_build "$new_source_dir" "$new_version"
 
-cd "$original_dir"
 abi-compliance-checker -lib libsecp256k1 -old "${base_source_dir}/build/ABI.dump" -new "${new_source_dir}/build/ABI.dump"
 git worktree remove "$base_source_dir"
 git worktree remove "$new_source_dir"