Python Kubernetes Downscaler

This is a fork of the no longer maintained hjacobs/kube-downscaler.

Scale down / "pause" Kubernetes workload (Deployments, StatefulSets, HorizontalPodAutoscalers, DaemonSets, CronJobs, Jobs, PodDisruptionBudgets, Argo Rollouts and Keda ScaledObjects too !) during non-work hours.

Table of Contents generated with DocToc

• Python Kubernetes Downscaler
  • Concepts
    • Algorithm
    • Minimum replicas
    • Specific workload
    • Example use cases
  • Usage
    • Helm Chart
    • Example configuration
    • Notes
  • Installation
    • Cluster Wide Access Installation
    • Limited Access Installation
  • Configuration
    • Uptime / downtime spec
    • Alternative Logic, Based on Periods
    • Command Line Options
    • Constrained Mode (Limited Access Mode)
    • Scaling Jobs: Overview
    • Scaling Jobs Natively
    • Scaling Jobs With Admission Controller
    • Scaling DaemonSets
    • Scaling ScaledObjects
    • Matching Labels Argument
    • Namespace Defaults
  • Migrate From Codeberg
    • Migrate From Codeberg - Cluster Wide Installation
    • Migrate From Codeberg - Limited Access Installation
  • Contributing
  • License

Concepts

📝 Deployments are interchangeable by any kind of supported workload for this whole guide unless explicitly stated otherwise.

The complete list of supported workload is defined here.

Algorithm

py-kube-downscaler will scale down the deployment's replicas if all of the following conditions are met:

• current time is not part of the "uptime" schedule or is part of the "downtime" schedule.

  If true, the schedules are evaluated in the following order:

  • downscaler/downscale-period or downscaler/downtime annotation on the workload definition
  • downscaler/upscale-period or downscaler/uptime annotation on the workload definition
  • downscaler/downscale-period or downscaler/downtime annotation on the workload's namespace
  • downscaler/upscale-period or downscaler/uptime annotation on the workload's namespace
  • --upscale-period or --default-uptime CLI argument
  • --downscale-period or --default-downtime CLI argument
  • UPSCALE_PERIOD or DEFAULT_UPTIME environment variable
  • DOWNSCALE_PERIOD or DEFAULT_DOWNTIME environment variable

• The workload's namespace is not part of the exclusion list:

  • If you provide an exclusion list, it will be used in place of the default (which includes only kube-system).

• The workload's label does not match the labels list.

• The workload's name is not part of the exclusion list

• The workload is not marked for exclusion (annotation downscaler/exclude: "true" or downscaler/exclude-until: "2024-04-05")

• There are no active pods that force the whole cluster into uptime (annotation downscaler/force-uptime: "true")

Minimum replicas

The deployment, by default, will be scaled down to zero replicas. This can be configured with a deployment or its namespace's annotation of downscaler/downtime-replicas or via CLI with --downtime-replicas.

Ex: downscaler/downtime-replicas: "1"

Specific workload

In case of HorizontalPodAutoscalers, the minReplicas field cannot be set to zero and thus downscaler/downtime-replicas should be at least 1.

-> See later in #Usage notes

Regarding CronJobs, their state will be defined to suspend: true as you might expect.

Example use cases

• Deploy the downscaler to a test (non-prod) cluster with a default uptime or downtime time range to scale down all deployments during the night and weekend.
• Deploy the downscaler to a production cluster without any default uptime/downtime setting and scale down specific deployments by setting the downscaler/uptime (or downscaler/downtime) annotation. This might be useful for internal tooling frontends which are only needed during work time.

You need to combine the downscaler with an elastic cluster autoscaler to actually save cloud costs. The official cluster autoscaler and the kube-aws-autoscaler were tested to work fine with the downscaler.

Usage

Helm Chart

For detailed information on deploying the py-kube-downscaler using our Helm chart, please refer to the Helm Chart README in the chart directory.

Example configuration

The example configuration uses the --dry-run as a safety flag to prevent downscaling --- remove it to enable the downscaler, e.g. by editing the deployment:

$ kubectl edit deploy py-kube-downscaler

The example deployment manifests come with a configured uptime (deploy/config.yaml sets it to "Mon-Fri 07:30-20:30 CET"), you can overwrite this per namespace or deployment, e.g.:

$ kubectl run nginx --image=nginx
$ kubectl annotate deploy nginx 'downscaler/uptime=Mon-Fri 09:00-17:00 America/Buenos_Aires'

Notes

Note that the default grace period of 15 minutes applies to the new nginx deployment, i.e.

• if the current time is not within Mon-Fri 9-17 (Buenos Aires timezone), it will downscale not immediately, but after 15 minutes. The downscaler will eventually log something like:

INFO: Scaling down Deployment default/nginx from 1 to 0 replicas (uptime: Mon-Fri 09:00-17:00 America/Buenos_Aires, downtime: never)

Note that in cases where a HorizontalPodAutoscaler (HPA) is used along with Deployments, consider the following:

• If downscale to 0 replicas is desired, the annotation should be applied on the Deployment. This is a special case, since minReplicas of 0 on HPA is not allowed. Setting Deployment replicas to 0 essentially disables the HPA. In such a case, the HPA will emit events like failed to get memory utilization: unable to get metrics for resource memory: no metrics returned from resource metrics API as there is no Pod to retrieve metrics from.
• If downscale greater than 0 is desired, the annotation should be applied on the HPA. This allows for dynamic scaling of the Pods even during downtime based upon the external traffic as well as maintain a lower minReplicas during downtime if there is no/low traffic. If the Deployment is annotated instead of the HPA, it leads to a race condition where py-kube-downscaler scales down the Deployment and HPA upscales it as its minReplicas is higher.

To enable Downscaler on HPA with --downtime-replicas=1, ensure to add the following annotations to Deployment and HPA.

$ kubectl annotate deploy nginx 'downscaler/exclude=true'
$ kubectl annotate hpa nginx 'downscaler/downtime-replicas=1'
$ kubectl annotate hpa nginx 'downscaler/uptime=Mon-Fri 09:00-17:00 America/Buenos_Aires'

Installation

KubeDownscaler offers two installation methods.

• Cluster Wide Access: This method is dedicated for users who have total access to the Cluster and aspire to adopt the tool throughout the cluster
• Limited Access: This method is dedicated to users who only have access to a limited number of namespaces and can adopt the tool only within them

Cluster Wide Access Installation

RBAC-Prerequisite: This installation mode requires permission to deploy Service Account, ClusterRole, ClusterRoleBinding, CRDs

The basic Cluster Wide installation is very simple

$ helm install py-kube-downscaler oci://ghcr.io/caas-team/charts/py-kube-downscaler

This command will deploy:

• Deployment: main deployment
• ConfigMap: used to supply parameters to the deployment
• ServiceAccount: represents the Cluster Idenity of the KubeDownscaler
• ClusterRole: needed to access all the resources that can be modified by the KubeDownscaler
• ClusterRoleBinding: links the ServiceAccount used by KubeDownscaler to the ClusterRole

It is possible to further customize it by changing the parameters present in the values.yaml file of the Chart

Limited Access Installation

RBAC-Prerequisite: This installation mode requires permission to deploy Service Account, Role and RoleBinding

The Limited Access installation requires the user to fill the following parameters inside values.yaml

• constrainedDownscaler: true (mandatory)
• constrainedNamespaces: [namespace1,namespace2,namespace3,...] (list of namespaces - mandatory)

It is also recommended to explicitly set the namespace where KubeDownscaler will be installed

$ helm install py-kube-downscaler oci://ghcr.io/caas-team/charts/py-kube-downscaler --namespace my-release-namespace --set constrainedDownscaler=true --set "constrainedNamespaces={namespace1,namespace2,namespace3}"

This command will deploy:

• Deployment: main deployment
• ConfigMap: used to supply parameters to the deployment
• ServiceAccount: represents the Cluster Identity of the KubeDownscaler

For each namespace inside constrainedNamespaces, the chart will deploy

• Role: needed to access all the resources that can be modified by the KubeDownscaler (inside that namespace)
• RoleBinding: links the ServiceAccount used by KubeDownscaler to the Role inside that namespace

If RBAC permissions are misconfigured and the KubeDownscaler is unable to access resources in one of the specified namespaces, a warning message will appear in the logs indicating a 403 Error

Configuration

Uptime / downtime spec

The downscaler is configured via command line args, environment variables and/or Kubernetes annotations.

Time definitions (e.g. DEFAULT_UPTIME) accept a comma separated list of specifications, e.g. the following configuration would downscale all deployments for non-work hours:

DEFAULT_UPTIME="Mon-Fri 07:30-20:30 Europe/Berlin"

To only downscale during the weekend and Friday after 20:00:

DEFAULT_DOWNTIME="Sat-Sun 00:00-24:00 CET,Fri-Fri 20:00-24:00 CET'

Each time specification can be in one of two formats:

• Recurring specifications have the format <WEEKDAY-FROM>-<WEEKDAY-TO-INCLUSIVE> <HH>:<MM>-<HH>:<MM> <TIMEZONE>. The timezone value can be any Olson timezone, e.g. "US/Eastern", "PST" or "UTC".
• Absolute specifications have the format <TIME_FROM>-<TIME_TO> where each <TIME> is an ISO 8601 date and time of the format <YYYY>-<MM>-<DD>T<HH>:<MM>:<SS>[+-]<TZHH>:<TZMM>.

If you are using the first format (recurring specifications) it is important to note that the downscaler can only interpret configurations within a single day and cannot process intervals that stretch across two different days. As a result, overlapping time intervals are not supported.

In the expression <WEEKDAY-FROM>-<WEEKDAY-TO-INCLUSIVE> <HH>:<MM>-<HH>:<MM> <TIMEZONE> the time range <HH>:<MM>-<HH>:<MM> should always have the end time later than the start time (in 24-hour format)

If you want to schedule downtime from 23:30 to 09:30 the following day, a configuration like this would be incorrect:

DEFAULT_DOWNTIME="Mon-Fri 23:30-09:30 Europe/Berlin"

The correct configuration would be:

DEFAULT_DOWNTIME="Mon-Fri 23:30-24:00 Europe/Berlin,Mon-Fri 00:00-09:30 Europe/Berlin"

Alternative Logic, Based on Periods

Instead of strict uptimes or downtimes, you can chose time periods for upscaling or downscaling. The time definitions are the same. In this case, the upscale or downscale happens only on time periods, rest of times will be ignored.

If upscale or downscale periods are configured, uptime and downtime will be ignored. This means that some options are mutually exclusive, e.g. you can either use --downscale-period or --default-downtime, but not both.

This definition will downscale your cluster between 19:00 and 20:00. If you upscale your cluster manually, it won't be scaled down until next day 19:00-20:00.

DOWNSCALE_PERIOD="Mon-Sun 19:00-20:00 Europe/Berlin"

Command Line Options

Available command line options:

--dry-run

: Dry run mode: do not change anything, just print what would be done

--debug

: Debug mode: print more information

--once

: Run loop only once and exit

--interval

: Loop interval (default: 60s)

--namespace

: Restrict the downscaler to work only in some namespaces (default: all namespaces). This is mainly useful for deployment scenarios where the deployer of py-kube-downscaler only has access to some namespaces (instead of cluster wide access). If used simultaneously with --exclude-namespaces, --namespace will take precedence overriding its value. This argument takes a comma separated list of namespaces (example: --namespace=default,test-namespace1,test-namespace2)

Important

It's strongly not advised to use this argument in a Cluster Wide Access installation, see the Constrained Mode section

--include-resources

: Downscale resources of this kind as comma separated list. Available resources are: [deployments, statefulsets, stacks, horizontalpodautoscalers, cronjobs, daemonsets, poddisruptionbudgets, rollouts, scaledobjects, jobs] (default: deployments)

--grace-period

: Grace period in seconds for new deployments before scaling them down (default: 15min). The grace period counts from time of creation of the deployment, i.e. updated deployments will immediately be scaled down regardless of the grace period. If the downscaler/grace-period annotation is present in a resource and its value is shorter than the global grace period, the annotation's value will override the global grace period for that specific resource.

--upscale-period

: Alternative logic to scale up only in given period of time (default: never), can also be configured via environment variable UPSCALE_PERIOD or via the annotation downscaler/upscale-period on each deployment

--downscale-period

: Alternative logic to scale down only in given period of time (default: never), can also be configured via environment variable DOWNSCALE_PERIOD or via the annotation downscaler/downscale-period on each deployment

--default-uptime

: Default time range to scale up for (default: always), can also be configured via environment variable DEFAULT_UPTIME or via the annotation downscaler/uptime on each deployment

--default-downtime

: Default time range to scale down for (default: never), can also be configured via environment variable DEFAULT_DOWNTIME or via the annotation downscaler/downtime on each deployment

--upscale-target-only

: When this optional argument is used, only the namespaces currently targeted by the downscaler will be upscaled during wake-up times. For instance, if your downscaler initially manages namespaces A, B, and C, but is later reconfigured to target only namespaces B and C, namespace A will remain downscaled if it was downscaled at the time of reconfiguration. If the parameter is not used, all previously downscaled namespaces may be upscaled, even if they are no longer targeted by the downscaler.

--exclude-namespaces

: Exclude namespaces from downscaling (list of regex patterns, default: kube-system), can also be configured via environment variable EXCLUDE_NAMESPACES. If used simultaneously with --exclude-namespaces, --namespace will take precedence overriding its value.

--exclude-deployments

: Exclude specific deployments/statefulsets/cronjobs from downscaling (default: py-kube-downscaler, downscaler), can also be configured via environment variable EXCLUDE_DEPLOYMENTS. Despite its name, this option will match the name of any included resource type (Deployment, StatefulSet, CronJob, ..).

--downtime-replicas

: Default value of replicas to downscale to, the annotation downscaler/downtime-replicas takes precedence over this value.

--deployment-time-annotation

: Optional: name of the annotation that would be used instead of the creation timestamp of the resource. This option should be used if you want the resources to be kept scaled up during a grace period (--grace-period) after a deployment. The format of the annotation's timestamp value must be exactly the same as for Kubernetes' creationTimestamp: %Y-%m-%dT%H:%M:%SZ. Recommended: set this annotation by your deployment tooling automatically.

--matching-labels

: Optional: list of workload's labels which are covered by the py-kube-downscaler scope. All workloads whose labels don't match any in the list are ignored. For backwards compatibility, if this argument is not specified, py-kube-downscaler will apply to all resources.

--admission-controller

: Optional: admission controller used by the kube-downscaler to downscale and upscale jobs. This argument won't take effect if used in conjunction with --namespace argument. Supported Admission Controllers are [gatekeeper, kyverno*]

Important

Make sure to read the Scaling Jobs With Admission Controller section to understand how to use the --admission-controller feature correctly

--api-server-timeout

: Optional: This is an advanced option that allows setting a timeout duration for all calls made by Kube Downscaler to the Kubernetes API Server. It can only take integer values (default: 10). This setting should only be added to Kube Downscaler arguments if timeout issues are observed in the logs.

--max-retries-on-conflict

: Optional: Specifies the maximum number of retries KubeDownscaler should perform when encountering a conflict error (HTTP 409). These errors occur when one of the resources, just before being processed by Kube Downscaler, is modified by another entity, such as an HPA, CI/CD pipeline, or manual intervention. If enabled, Kube Downscaler will retry the update immediately, without waiting for the next iteration (default: 0). This argument is strongly recommended when using the --once argument to process large clusters

Constrained Mode (Limited Access Mode)

The Constrained Mode (also known as Limited Access Mode) is designed for users who do not have full cluster access. It is automatically activated when the --namespace argument is specified. This mode utilizes a different set of API calls optimized for environments where users cannot deploy ClusterRole and ClusterRoleBinding. Additionally, this mode disables the ability to scale Jobs via Admission Controllers since the "Scaling Jobs With Admission Controllers" feature requires Full Cluster Access to operate.

If you are installing KubeDownscaler with full cluster access, it is strongly recommended to use the --exclude-namespaces parameter instead of --namespace. Using --namespace in a cluster wide access installation will make API calls less efficient and will disable the ability to scale Jobs with Admission Controllers for the reason specified above.

Scaling Jobs: Overview

Kube Downscaler offers two possibilities for downscaling Jobs:

1. Downscaling Jobs Natively: Kube Downscaler will downscale Jobs by modifying the spec.suspend parameter within the job's yaml file. The spec.suspend parameter will be set to True and the pods created by the Job will be automatically deleted.

2. Downscaling Jobs With Admission Controllers: Kube Downscaler will block the creation of all new Jobs using Admission Policies created with an Admission Controller (Kyverno or Gatekeeper, depending on the user's choice).

In both cases, all Jobs created by CronJob will not be modified unless the user specifies via the --include-resources argument that they want to turn off both Jobs and CronJobs

How To Choose The Correct Mode:

1. The first mode is recommended when the Jobs created within the Cluster are few and sporadic

2. The second mode is recommended when there are many Jobs created within the Cluster and they are created at very frequent intervals.

it's important to note the following:

The second mode is specifically designed to avoid frequent node provisioning. This is particularly relevant when KubeDownscaler might turn off jobs shortly after they've triggered node provisioning. If jobs trigger node provisioning but are then scaled down or stopped by KubeDownscaler within 30 to 60 seconds, the Cluster Autoscaler is basically doing an unnecessary provisioning action because the new nodes will be scaled down shortly after as well. Frequently provisioning nodes only to have them become unnecessary shortly thereafter is an operation that should be minimized, as it is inefficient.

Scaling Jobs Natively

To scale down jobs natively, you only need to specify jobs inside the --include-resource argument of the Deployment

Scaling Jobs With Admission Controller

Before scaling jobs with an Admission Controller make sure the Admission Controller of your choice is correctly installed inside the cluster. At startup, Kube-Downscaler will always perform some health checks for the Admission Controller of your choice that are displayed inside logs when the argument --debug arg is present inside the main Deployment.

Important: In order to use this feature you will need to exclude Kyverno or Gatekeeper resources from downscaling otherwise the admission controller pods won't be able to block jobs. You can use EXCLUDE_NAMESPACES environment variable or --exclude-namespaces arg to exclude "kyverno" or "gatekeeper-system" namespaces. Alternatively EXCLUDE_DEPLOYMENTS environment variable or --exclude-deployments arg to exclude only certain resources inside "kyverno" or "gatekeeper-system" namespaces

Important: --admission-controller argument won't take effect if used in conjunction with --namespace argument. if you specified jobs inside the --include-resources argument KubeDownscaler will still downscale jobs natively. Please read the Constrained Mode section to understand why

The workflow for blocking jobs is different if you use Gatekeeper or Kyverno, both are described below

Blocking Jobs: Gatekeeper Workflow

1. Kube-Downscaler will install a new Custom Resource Definition called kubedownscalerjobsconstraint.
2. Kube-Downscaler will create a Constraint called "KubeDownscalerJobsConstraint" for each namespace that is not excluded

Blocking Jobs: Kyverno Workflow

1. Kube-Downscaler will create a Policy for each namespace that is not excluded

All the statements below are valid for both Kyverno and Gatekeeper, unless specified otherwise

Important: Jobs started from CronJobs are excluded by default unless you have included cronjobs inside --include-resources argument

Annotations: both the downscaler/exclude and downscaler/exclude-until annotations are fully supported inside jobs to exclude them from downscaling. However, when using downscaler/exclude-until, the time must be specified in the RFC format YYYY-MM-DDT00:00:00Z otherwise the exclusion won't work. Please check the example below

apiVersion: batch/v1
kind: Job
metadata:
  namespace: default
  name: testjob
  annotations:
    downscaler/exclude-until: "2024-01-31T00:00:00Z"
spec:
  template:
    spec:
      containers:
        - image: nginx
          name: testjob
      restartPolicy: Never

Arguments and Env: you can also use EXCLUDE_DEPLOYMENTS environment variable or the argument --exclude-deployments to exclude jobs. As described above, despite their names, these variables work for any type of workload

Important: downscaler/downscale-period, downscaler/downtime, downscaler/upscale-period, downscaler/uptime annotations are not supported if specified directly inside the Job definition due to limitations on computing days of the week inside the policies. However you can still use these annotations at Namespace level to downscale/upscale Jobs

Important: global --grace-period is not supported for this feature at the moment, however downscaler/downscale-period annotation is supported at namespace level when used to scale down jobs with Admission Controllers

Important:

Deleting Policies: if for some reason you want to delete all resources blocking jobs, you can use these commands:

Gatekeeper

$ kubectl delete constraints -A -l origin=kube-downscaler

Kyverno

$ kubectl delete policies -A -l origin=kube-downscaler

Scaling DaemonSets

The feature to scale DaemonSets can be very useful for reducing the base occupancy of a node. If enabled, the DaemonSets downscaling algorithm works like this:

1. Downtime Hours: Kube Downscaler will add to each targeted DaemonSet a Node Selector that cannot be satisfied kube-downscaler-non-existent=true
2. Uptime Hours: Kube Downscaler will remove the kube-downscaler-non-existent=true Node Selector from each targeted DaemonSet

Scaling ScaledObjects

The ability to downscale ScaledObjects is very useful for workloads that use Keda to support a wider range of horizontal scaling metrics compared to the native Horizontal Pod Autoscaler (HPA). Keda provides a built-in way to disable ScaledObjects when they are not needed. This can be achieved by using the annotation "autoscaling.keda.sh/paused-replicas".

The KubeDownscaler algorithm will apply the annotation "autoscaling.keda.sh/paused-replicas" during downtime periods, setting its value to what the user specifies through the KubeDownscaler argument --downtime-replicas or the workload annotation "downscaler/downtime-replicas". During uptime, KubeDownscaler will remove the "autoscaling.keda.sh/paused-replicas" annotation, allowing the ScaledObject to operate as originally configured.

Important: When using the "downscaler/downtime-replicas" annotation at the workload level, it is crucial that this annotation is included in both the ScaledObject and the corresponding Deployment or StatefulSet that it controls and the values of the annotation must match in both locations. Alternatively, it is possible to exclude the Deployment or StatefulSet from scaling by using the annotation "downscaler/exclude", while keeping downscaling active only on the ScaledObject.

Important: KubeDownscaler has an automatic mechanism that detects if the "autoscaling.keda.sh/paused-replicas" annotation is already present on the ScaledObject. If that is the case, KubeDownscaler will overwrite it with the target value specified for downtime and, during uptime, will restore the original value.

Technical Detail: During downscaling, KubeDownscaler will set the annotation "downscaler/original-replicas" to -1, this value acts as a placeholder to indicate that the ScaledObject was active during uptime.

Matching Labels Argument

Labels, in Kubernetes, are key-value pairs that can be used to identify and group resources.

You can use the --matching-labels argument to include only certain resources in the namespaces that are targeted by the Kube Downscaler. inside this argument you can specify:

• labels written in this format [key=value]
• regular expressions that target this format [key=value].

Each entry must be separated by a comma (,). If multiple entries are specified, the Kube Downscaler evaluates them as an OR condition

To make it more clear, given the following resource

kind: Deployment
metadata:
  labels:
    app: nginx
    type: example
  name: nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
        - image: nginx
          name: nginx

Kube-Downscaler will evaluate the input of the --matching-labels argument against app=nginx and type=example. If at least one of the two key-value pairs matches the resource will be downscaled

Example of valid inputs are:

--matching-labels=hello=world: if the resource has a label "hello" equals to "world" it will be downscaled

--matching-labels=hello=world,version=2.0: if the resource has a label "hello" equals to "world" or a label "version" equal to "2.0" it will be downscaled

--matching-labels=^it-plt.*: if the resource has a label that starts with "it-plt" it will be downscaled

--matching-labels=^it-plt.*,not-critical=true: if the resource has a label that starts with "it-plt" or a label "not-critical" equals to "true" it will be downscaled

Namespace Defaults

DEFAULT_UPTIME, DEFAULT_DOWNTIME, FORCE_UPTIME and exclusion can also be configured using Namespace annotations. Where configured these values supersede the other global default values.

apiVersion: v1
kind: Namespace
metadata:
  name: foo
  labels:
    name: foo
  annotations:
    downscaler/uptime: Mon-Sun 07:30-18:00 CET

The following annotations are supported on the Namespace level:

• downscaler/upscale-period
• downscaler/downscale-period
• downscaler/uptime: set "uptime" for all resources in this namespace
• downscaler/downtime: set "downtime" for all resources in this namespace
• downscaler/force-downtime: force scaling down all resources in this namespace - can be true/false or a period
• downscaler/force-uptime: force scaling up all resources in this namespace - can be true/false or a period
• downscaler/exclude: set to true to exclude all resources in the namespace
• downscaler/exclude-until: temporarily exclude all resources in the namespace until the given timestamp
• downscaler/downtime-replicas: overwrite the default target replicas to scale down to (default: zero)

Migrate From Codeberg

For all users who come from the Codeberg repository (no longer maintained by the original author) it is possible to migrate to this new version of the kube-downscaler by installing the Helm chart in these ways that will preserve the old nomenclature already present inside your cluster

Migrate From Codeberg - Cluster Wide Installation

Read Installation section to understand what is meant for Cluster Wide Installation

$ helm install kube-downscaler oci://ghcr.io/caas-team/charts/py-kube-downscaler --set nameOverride=kube-downscaler --set configMapName=kube-downscaler

or extracting and applying the template manually:

$ helm template kube-downscaler oci://ghcr.io/caas-team/charts/py-kube-downscaler --set nameOverride=kube-downscaler --set configMapName=kube-downscaler

Migrate From Codeberg - Limited Access Installation

Read Installation section to understand what is meant for Limited Access Installation

$ helm install kube-downscaler oci://ghcr.io/caas-team/charts/py-kube-downscaler --set nameOverride=kube-downscaler --set configMapName=kube-downscaler --set constrainedDownscaler=true --set "constrainedNamespaces={namespace1,namespace2,namespace3}"

or extracting and applying the template manually:

$ helm template kube-downscaler oci://ghcr.io/caas-team/charts/py-kube-downscaler --set nameOverride=kube-downscaler --set configMapName=kube-downscaler --set constrainedDownscaler=true --set "constrainedNamespaces={namespace1,namespace2,namespace3}"

Contributing

Easiest way to contribute is to provide feedback! We would love to hear what you like and what you think is missing. Create an issue and we will take a look. PRs are welcome.

License

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.