From 932eeeadb5a13c89aad6f4f5db532fd9968ec3f0 Mon Sep 17 00:00:00 2001
From: Mohammed Hussain <56958445+hussainmohd-a@users.noreply.github.com>
Date: Thu, 30 May 2024 14:04:02 +0530
Subject: [PATCH 1/2] wg: doc for wireguard integration

pending screenshots
---
 docs/proxy/wireguard.md | 88 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 docs/proxy/wireguard.md

diff --git a/docs/proxy/wireguard.md b/docs/proxy/wireguard.md
new file mode 100644
index 0000000..c8151ed
--- /dev/null
+++ b/docs/proxy/wireguard.md
@@ -0,0 +1,88 @@
+## Adding a WireGuard Configuration to Rethink DNS + Firewall + VPN App
+
+This guide will walk you through the steps to add a WireGuard configuration to the Rethink DNS + Firewall + VPN app.
+
+### Step 1: Open the App
+
+1. Open the **Rethink DNS + Firewall + VPN** app on your device.
+
+### Step 2: Navigate to the WireGuard Section
+
+1. Tap on the **VPN** tab at the bottom of the screen.
+2. Select **WireGuard** from the list of available VPN options.
+
+### Step 3: Add a New WireGuard Configuration
+
+1. Tap on the **+** (plus) button or the **Add Configuration** option.
+2. You will see three options:
+   - **Manual Entry**
+   - **Import Config**
+   - **Scan QR Code**
+
+### Step 4: Manual Entry
+
+1. Select **Manual Entry** to enter the configuration details manually.
+2. Enter a name for the configuration in the **Name** field.
+
+#### Enter WireGuard Configuration Details
+
+1. **Public Key**: Enter the public key provided by your WireGuard server.
+2. **Private Key**: Enter your private key. (Ensure this is kept secure and never shared.)
+3. **Endpoint**: Enter the endpoint URL or IP address of your WireGuard server along with the port (e.g., `vpn.example.com:51820`).
+4. **Allowed IPs**: Enter the IP addresses that should be routed through the WireGuard tunnel (e.g., `0.0.0.0/0` to route all traffic).
+
+#### Optional - Set Additional Parameters
+
+1. **DNS**: Enter the DNS server(s) to be used with this WireGuard configuration.
+2. **Persistent Keepalive**: Enter a value (in seconds) to keep the connection alive, if required by your server configuration (e.g., `25`).
+
+3. Once all the necessary details have been entered, tap on the **Save** button.
+
+### Step 5: Import Configuration
+
+1. Select **Import Config**.
+2. Navigate to the location of your WireGuard configuration file (`.conf`).
+3. Select the configuration file to import the details automatically.
+4. The app will parse the configuration file and fill in the necessary fields for you.
+5. Review and adjust the settings if necessary, then tap on the **Save** button.
+
+### Step 6: Scan QR Code
+
+1. Select **Scan QR Code**.
+2. Allow the app to access your camera if prompted.
+3. Scan the QR code provided by your WireGuard server.
+4. The app will automatically fill in the configuration details from the QR code.
+5. Review and adjust the settings if necessary, then tap on the **Save** button.
+
+### Step 7: Enable the WireGuard Configuration
+
+1. After saving, you will see the newly added WireGuard configuration in the list.
+2. Tap on the configuration name to enable it.
+3. You may be prompted to grant VPN permissions; allow the necessary permissions to proceed.
+
+### Step 8: Switch Between Simple and Advanced Modes
+
+1. By default, the WireGuard configuration is in **Simple Mode**.
+2. To switch to **Advanced Mode**, tap on the **Advanced** option.
+3. In **Advanced Mode**, you have additional settings available, including the ability to select specific apps to use with the WireGuard VPN.
+
+#### Selecting Apps in Advanced Mode
+
+1. In the **Advanced Mode** settings, tap on **Select Apps**.
+2. Choose the apps you want to route through the WireGuard VPN.
+3. Save your selection and exit the settings.
+
+### Step 9: Verify Connection
+
+1. Once connected, you should see a status indication that the WireGuard VPN is active.
+2. You can verify the connection by checking your IP address or using any network diagnostic tool to ensure your traffic is being routed through the WireGuard VPN.
+
+### Troubleshooting
+
+- **Connection Issues**: Ensure that your WireGuard server details are correct and that the server is running.
+- **DNS Issues**: Verify that the DNS servers specified in the configuration are reachable and correctly configured.
+- **Permission Issues**: Make sure that the app has the necessary permissions to establish a VPN connection.
+
+### Conclusion
+
+You have successfully added a WireGuard configuration to the Rethink DNS + Firewall + VPN app. If you encounter any issues or need further assistance, please refer to the support documentation or contact the support team.

From ebe6968f220cda0abb14073c3c8790a3d8d1d9ad Mon Sep 17 00:00:00 2001
From: Mohammed Hussain <56958445+hussainmohd-a@users.noreply.github.com>
Date: Thu, 30 May 2024 14:08:41 +0530
Subject: [PATCH 2/2] sidebar: set link for proxy

---
 sidebars.js | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sidebars.js b/sidebars.js
index 626ddb0..73a75f1 100644
--- a/sidebars.js
+++ b/sidebars.js
@@ -11,6 +11,11 @@ module.exports = {
       label: 'Firewall',
       items: ['firewall/introduction', 'firewall/orbot'],
     },
+    {
+      type: 'category',
+      label: 'Proxy',
+      items: ['proxy/wireguard'],
+    },
   ],
   someSidebar: {
     // Features: ['mdx'],