diff --git a/t/t0029-redfish.t b/t/t0029-redfish.t
index fc78d245..2b68b6f0 100755
--- a/t/t0029-redfish.t
+++ b/t/t0029-redfish.t
@@ -107,6 +107,378 @@ test_expect_success 'stop powerman daemon' '
 	wait
 '
 
+#
+# redfishpower hpe cray supercomputing ex chassis test
+#
+
+test_expect_success 'create powerman.conf for chassis w/ 16 redfish nodes (crayex)' '
+	cat >powerman_hpe_cray_supercomputing_ex_chassis.conf <<-EOT
+	listen "$testaddr"
+	include "$devicesdir/redfishpower-hpe-cray-supercomputing-ex-chassis.dev"
+	device "d0" "redfishpower-CrayEX" "$redfishdir/redfishpower -h cmm0,t[0-15] --test-mode |&"
+	node "cmm0,perif[0-7],blade[0-7],t[0-15]" "d0"
+	EOT
+'
+test_expect_success 'start powerman daemon and wait for it to start (crayex)' '
+	$powermand -Y -c powerman_hpe_cray_supercomputing_ex_chassis.conf &
+	echo $! >powermand.pid &&
+	$powerman --retry-connect=100 --server-host=$testaddr -d
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayex_query1.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-7],t[0-15]" "" >test_crayex_query1.exp &&
+	test_cmp test_crayex_query1.exp test_crayex_query1.out
+'
+# powering on descendants with cmm off, nothing turns on
+test_expect_success 'powerman -1 blade[0-7] doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 blade[0-7] >test_crayex_on1.out &&
+	echo blade[0-7]: ancestor off >test_crayex_on1.exp &&
+	echo Command completed with errors >>test_crayex_on1.exp &&
+	test_cmp test_crayex_on1.exp test_crayex_on1.out
+'
+test_expect_success 'powerman -1 perif[0-7] doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 perif[0-7] >test_crayex_on2.out &&
+	echo perif[0-7]: ancestor off >test_crayex_on2.exp &&
+	echo Command completed with errors >>test_crayex_on2.exp &&
+	test_cmp test_crayex_on2.exp test_crayex_on2.out
+'
+test_expect_success 'powerman -1 t[0-15] doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 t[0-15] >test_crayex_on3.out &&
+	echo t[0-15]: ancestor off >test_crayex_on3.exp &&
+	echo Command completed with errors >>test_crayex_on3.exp &&
+	test_cmp test_crayex_on3.exp test_crayex_on3.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayex_query2.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-7],t[0-15]" "" >test_crayex_query2.exp &&
+	test_cmp test_crayex_query2.exp test_crayex_query2.out
+'
+# turn on cmm works
+test_expect_success 'powerman -1 cmm0 completes' '
+	$powerman -h $testaddr -1 cmm0 >test_crayex_on4.out &&
+	echo Command completed successfully >test_crayex_on4.exp &&
+	test_cmp test_crayex_on4.exp test_crayex_on4.out
+'
+test_expect_success 'powerman -q shows cmm0 on' '
+	$powerman -h $testaddr -q >test_crayex_query3.out &&
+	makeoutput "cmm0" "blade[0-7],perif[0-7],t[0-15]" "" >test_crayex_query3.exp &&
+	test_cmp test_crayex_query3.exp test_crayex_query3.out
+'
+# turn on children of blades does not work
+test_expect_success 'powerman -1 t[0-15] doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 t[0-15] >test_crayex_on5.out &&
+	echo t[0-15]: ancestor off >test_crayex_on5.exp &&
+	echo Command completed with errors >>test_crayex_on5.exp &&
+	test_cmp test_crayex_on5.exp test_crayex_on5.out
+'
+test_expect_success 'powerman -q shows cmm0 on' '
+	$powerman -h $testaddr -q >test_crayex_query4.out &&
+	makeoutput "cmm0" "blade[0-7],perif[0-7],t[0-15]" "" >test_crayex_query4.exp &&
+	test_cmp test_crayex_query4.exp test_crayex_query4.out
+'
+# turn on some blades, allows some nodes to be turned on
+test_expect_success 'powerman -1 blade[4-7] completes' '
+	$powerman -h $testaddr -1 blade[4-7] >test_crayex_on6.out &&
+	echo Command completed successfully >test_crayex_on6.exp &&
+	test_cmp test_crayex_on6.exp test_crayex_on6.out
+'
+test_expect_success 'powerman -1 t[0-15] doesnt work, some succeed' '
+	test_must_fail $powerman -h $testaddr --diag -1 t[0-15] >test_crayex_on7.out &&
+	echo t[0-7]: ancestor off >test_crayex_on7.exp &&
+	echo Command completed with errors >>test_crayex_on7.exp &&
+	test_cmp test_crayex_on7.exp test_crayex_on7.out
+'
+test_expect_success 'powerman -q shows blade[4-7],cmm0,t[8-15] on' '
+	$powerman -h $testaddr -q >test_crayex_query5.out &&
+	makeoutput "blade[4-7],cmm0,t[8-15]" "blade[0-3],perif[0-7],t[0-7]" "" >test_crayex_query5.exp &&
+	test_cmp test_crayex_query5.exp test_crayex_query5.out
+'
+# turn on blades and perif and then nodes
+test_expect_success 'powerman -1 blade[0-3],perif[0-7] completes' '
+	$powerman -h $testaddr -1 blade[0-3],perif[0-7] >test_crayex_on8.out &&
+	echo Command completed successfully >test_crayex_on8.exp &&
+	test_cmp test_crayex_on8.exp test_crayex_on8.out
+'
+test_expect_success 'powerman -q shows blade[0-7],cmm0,perif[0-7] on' '
+	$powerman -h $testaddr -q >test_crayex_query6.out &&
+	makeoutput "blade[0-7],cmm0,perif[0-7],t[8-15]" "t[0-7]" "" >test_crayex_query6.exp &&
+	test_cmp test_crayex_query6.exp test_crayex_query6.out
+'
+test_expect_success 'powerman -1 t[0-15] completes' '
+	$powerman -h $testaddr -1 t[0-15] >test_crayex_on6.out &&
+	echo Command completed successfully >test_crayex_on6.exp &&
+	test_cmp test_crayex_on6.exp test_crayex_on6.out
+'
+test_expect_success 'powerman -q shows blade[0-7],cmm0,t[0-15] on' '
+	$powerman -h $testaddr -q >test_crayex_query7.out &&
+	makeoutput "blade[0-7],cmm0,perif[0-7],t[0-15]" "" "" >test_crayex_query7.exp &&
+	test_cmp test_crayex_query7.exp test_crayex_query7.out
+'
+# turn off leaves works
+test_expect_success 'powerman -0 t[8-15] completes' '
+	$powerman -h $testaddr -0 t[8-15] >test_crayex_off1.out &&
+	echo Command completed successfully >test_crayex_off1.exp &&
+	test_cmp test_crayex_off1.exp test_crayex_off1.out
+'
+test_expect_success 'powerman -q shows blade[0-7],cmm0,t[0-7] on' '
+	$powerman -h $testaddr -q >test_crayex_query8.out &&
+	makeoutput "blade[0-7],cmm0,perif[0-7],t[0-7]" "t[8-15]" "" >test_crayex_query8.exp &&
+	test_cmp test_crayex_query8.exp test_crayex_query8.out
+'
+# turn off level 2 perif & blades, remaining leaves are now off
+test_expect_success 'powerman -0 blade[0-7],perif[0-7] completes' '
+	$powerman -h $testaddr -0 blade[0-7],perif[0-7] >test_crayex_off2.out &&
+	echo Command completed successfully >test_crayex_off2.exp &&
+	test_cmp test_crayex_off2.exp test_crayex_off2.out
+'
+test_expect_success 'powerman -q shows cmm0 on' '
+	$powerman -h $testaddr -q >test_crayex_query9.out &&
+	makeoutput "cmm0" "blade[0-7],perif[0-7],t[0-15]" "" >test_crayex_query9.exp &&
+	test_cmp test_crayex_query9.exp test_crayex_query9.out
+'
+# turn off cmm works
+test_expect_success 'powerman -0 cmm0 completes' '
+	$powerman -h $testaddr -0 cmm0 >test_crayex_off3.out &&
+	echo Command completed successfully >test_crayex_off3.exp &&
+	test_cmp test_crayex_off3.exp test_crayex_off3.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayex_query10.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-7],t[0-15]" "" >test_crayex_query10.exp &&
+	test_cmp test_crayex_query10.exp test_crayex_query10.out
+'
+# turn on everything doesn't work
+test_expect_success 'powerman -1 blade[0-7],cmm0,perif[0-7],t[0-15] doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 blade[0-7],cmm0,perif[0-7],t[0-15] >test_crayex_on9.out &&
+	echo blade[0-7],cmm0,perif[0-7],t[0-15]: cannot turn on parent and child >test_crayex_on9.exp &&
+	echo Command completed with errors >>test_crayex_on9.exp &&
+	test_cmp test_crayex_on9.exp test_crayex_on9.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayex_query11.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-7],t[0-15]" "" >test_crayex_query11.exp &&
+	test_cmp test_crayex_query11.exp test_crayex_query11.out
+'
+# turn everything on
+test_expect_success 'powerman turn on everything' '
+	$powerman -h $testaddr -1 cmm0 >test_crayex_on9A.out &&
+	echo Command completed successfully >test_crayex_on9A.exp &&
+	test_cmp test_crayex_on9A.exp test_crayex_on9A.out &&
+	$powerman -h $testaddr -1 blade[0-7],perif[0-7] >test_crayex_on9B.out &&
+	echo Command completed successfully >test_crayex_on9B.exp &&
+	test_cmp test_crayex_on9B.exp test_crayex_on9B.out &&
+	$powerman -h $testaddr -1 t[0-15] >test_crayex_on9C.out &&
+	echo Command completed successfully >test_crayex_on9C.exp &&
+	test_cmp test_crayex_on9C.exp test_crayex_on9C.out
+'
+test_expect_success 'powerman -q shows all on' '
+	$powerman -h $testaddr -q >test_crayex_query12.out &&
+	makeoutput "blade[0-7],cmm0,perif[0-7],t[0-15]" "" "" >test_crayex_query12.exp &&
+	test_cmp test_crayex_query12.exp test_crayex_query12.out
+'
+# turn off everything works
+test_expect_success 'powerman -0 blade[0-3],cmm0,perif[0-7],t[0-15] completes' '
+	$powerman -h $testaddr -0 blade[0-3],cmm0,perif[0-7],t[0-15] >test_crayex_off4.out &&
+	echo Command completed successfully >test_crayex_off4.exp &&
+	test_cmp test_crayex_off4.exp test_crayex_off4.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayex_query13.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-7],t[0-15]" "" >test_crayex_query13.exp &&
+	test_cmp test_crayex_query13.exp test_crayex_query13.out
+'
+test_expect_success 'stop powerman daemon (crayex)' '
+	kill -15 $(cat powermand.pid) &&
+	wait
+'
+
+#
+# redfishpower hpe cray supercomputing ex chassis test - some unpopulated
+#
+# assume perif[4-7] and blade[4-7] do not exist
+# as a result t[8-15] do not exist
+#
+
+test_expect_success 'create powerman.conf for chassis w/ 16 redfish nodes (crayexU)' '
+	cat >powerman_hpe_cray_supercomputing_ex_chassis_U.conf <<-EOT
+	listen "$testaddr"
+	include "$devicesdir/redfishpower-hpe-cray-supercomputing-ex-chassis.dev"
+	device "d0" "redfishpower-CrayEX" "$redfishdir/redfishpower -h cmm0,t[0-7],unused[0-7] --test-mode |&"
+	node "cmm0,perif[0-3],blade[0-3],t[0-7]" "d0" "Enclosure,Perif[0-3],Blade[0-3],Node[0-7]"
+	EOT
+'
+test_expect_success 'start powerman daemon and wait for it to start (crayexU)' '
+	$powermand -Y -c powerman_hpe_cray_supercomputing_ex_chassis_U.conf &
+	echo $! >powermand.pid &&
+	$powerman --retry-connect=100 --server-host=$testaddr -d
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayexU_query1.out &&
+	makeoutput "" "blade[0-3],cmm0,perif[0-3],t[0-7]" "" >test_crayexU_query1.exp &&
+	test_cmp test_crayexU_query1.exp test_crayexU_query1.out
+'
+# turn on undefined stuff leads to errors
+test_expect_success 'powerman fails on unpopulated targets' '
+	test_must_fail $powerman -h $testaddr -1 blade4 &&
+	test_must_fail $powerman -h $testaddr -1 perif5 &&
+	test_must_fail $powerman -h $testaddr -1 t8
+'
+# turn on everything works
+test_expect_success 'powerman turn on everything' '
+	$powerman -h $testaddr -1 cmm0 >test_crayexU_on9A.out &&
+	echo Command completed successfully >test_crayexU_on9A.exp &&
+	test_cmp test_crayexU_on9A.exp test_crayexU_on9A.out &&
+	$powerman -h $testaddr -1 blade[0-3],perif[0-3] >test_crayexU_on9B.out &&
+	echo Command completed successfully >test_crayexU_on9B.exp &&
+	test_cmp test_crayexU_on9B.exp test_crayexU_on9B.out &&
+	$powerman -h $testaddr -1 t[0-7] >test_crayexU_on9C.out &&
+	echo Command completed successfully >test_crayexU_on9C.exp &&
+	test_cmp test_crayexU_on9C.exp test_crayexU_on9C.out
+'
+test_expect_success 'powerman -q shows all on' '
+	$powerman -h $testaddr -q >test_crayexU_query2.out &&
+	makeoutput "blade[0-3],cmm0,perif[0-3],t[0-7]" "" "" >test_crayexU_query2.exp &&
+	test_cmp test_crayexU_query2.exp test_crayexU_query2.out
+'
+# turn off everything works
+test_expect_success 'powerman -0 blade[0-3],cmm0,perif[0-3],t[0-7] completes' '
+	$powerman -h $testaddr -0 blade[0-3],cmm0,perif[0-3],t[0-7] >test_crayexU_off1.out &&
+	echo Command completed successfully >test_crayexU_off1.exp &&
+	test_cmp test_crayexU_off1.exp test_crayexU_off1.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayexU_query3.out &&
+	makeoutput "" "blade[0-3],cmm0,perif[0-3],t[0-7]" "" >test_crayexU_query3.exp &&
+	test_cmp test_crayexU_query3.exp test_crayexU_query3.out
+'
+test_expect_success 'stop powerman daemon (crayexU)' '
+	kill -15 $(cat powermand.pid) &&
+	wait
+'
+
+#
+# redfishpower hpe cray supercomputing ex chassis test - rabbit
+#
+# rabbit is descendant of perif 7
+#
+
+test_expect_success 'create powerman.conf for chassis w/ 16 redfish nodes (crayexR)' '
+	cat >powerman_hpe_cray_supercomputing_ex_chassis_U.conf <<-EOT
+	listen "$testaddr"
+	include "$devicesdir/redfishpower-hpe-cray-supercomputing-ex-chassis.dev"
+	device "d0" "redfishpower-CrayEX-rabbit-s4s7" "$redfishdir/redfishpower -h cmm0,t[0-15],rabbit --test-mode |&"
+	node "cmm0,perif[0-4,7],blade[0-7],t[0-15],rabbit" "d0" "Enclosure,Perif[0-4,7],Blade[0-7],Node[0-16]"
+	EOT
+'
+test_expect_success 'start powerman daemon and wait for it to start (crayexR)' '
+	$powermand -Y -c powerman_hpe_cray_supercomputing_ex_chassis_U.conf &
+	echo $! >powermand.pid &&
+	$powerman --retry-connect=100 --server-host=$testaddr -d
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayexR_query1.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15]" "" >test_crayexR_query1.exp &&
+	test_cmp test_crayexR_query1.exp test_crayexR_query1.out
+'
+# powering on rabbit with cmm and perif7 off
+test_expect_success 'powerman -1 rabbit doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 rabbit >test_crayexR_on1.out &&
+	echo rabbit: ancestor off >test_crayexR_on1.exp &&
+	echo Command completed with errors >>test_crayexR_on1.exp &&
+	test_cmp test_crayexR_on1.exp test_crayexR_on1.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayexR_query2.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15]" "" >test_crayexR_query2.exp &&
+	test_cmp test_crayexR_query2.exp test_crayexR_query2.out
+'
+# turn on cmm works, can't turn on rabbit
+test_expect_success 'powerman -1 cmm0 completes' '
+	$powerman -h $testaddr -1 cmm0 >test_crayexR_on2.out &&
+	echo Command completed successfully >test_crayexR_on2.exp &&
+	test_cmp test_crayexR_on2.exp test_crayexR_on2.out
+'
+test_expect_success 'powerman -1 rabbit doesnt work' '
+	test_must_fail $powerman -h $testaddr --diag -1 rabbit >test_crayexR_on3.out &&
+	echo rabbit: ancestor off >test_crayexR_on3.exp &&
+	echo Command completed with errors >>test_crayexR_on3.exp &&
+	test_cmp test_crayexR_on3.exp test_crayexR_on3.out
+'
+test_expect_success 'powerman -q shows cmm0 on' '
+	$powerman -h $testaddr -q >test_crayexR_query3.out &&
+	makeoutput "cmm0" "blade[0-7],perif[0-4,7],rabbit,t[0-15]" "" >test_crayexR_query3.exp &&
+	test_cmp test_crayexR_query3.exp test_crayexR_query3.out
+'
+# turn on perif7 works, can turn on rabbit now
+test_expect_success 'powerman -1 perif7 completes' '
+	$powerman -h $testaddr -1 perif7 >test_crayexR_on4.out &&
+	echo Command completed successfully >test_crayexR_on4.exp &&
+	test_cmp test_crayexR_on4.exp test_crayexR_on4.out
+'
+test_expect_success 'powerman -1 rabbit completes' '
+	$powerman -h $testaddr -1 rabbit >test_crayexR_on5.out &&
+	echo Command completed successfully >test_crayexR_on5.exp &&
+	test_cmp test_crayexR_on5.exp test_crayexR_on5.out
+'
+test_expect_success 'powerman -q shows cmm0,perif7,rabbit on' '
+	$powerman -h $testaddr -q >test_crayexR_query4.out &&
+	makeoutput "cmm0,perif7,rabbit" "blade[0-7],perif[0-4],t[0-15]" "" >test_crayexR_query4.exp &&
+	test_cmp test_crayexR_query4.exp test_crayexR_query4.out
+'
+# turn off rabbit, perif7, cmm0
+test_expect_success 'powerman -0 rabbit completes' '
+	$powerman -h $testaddr -0 rabbit >test_crayexR_off1.out &&
+	echo Command completed successfully >test_crayexR_off1.exp &&
+	test_cmp test_crayexR_off1.exp test_crayexR_off1.out
+'
+test_expect_success 'powerman -0 perif7 completes' '
+	$powerman -h $testaddr -0 perif7 >test_crayexR_off2.out &&
+	echo Command completed successfully >test_crayexR_off2.exp &&
+	test_cmp test_crayexR_off2.exp test_crayexR_off2.out
+'
+test_expect_success 'powerman -0 cmm0 completes' '
+	$powerman -h $testaddr -0 cmm0 >test_crayexR_off3.out &&
+	echo Command completed successfully >test_crayexR_off3.exp &&
+	test_cmp test_crayexR_off3.exp test_crayexR_off3.out
+'
+test_expect_success 'powerman -q shows everything off' '
+	$powerman -h $testaddr -q >test_crayexR_query5.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15]" "" >test_crayexR_query5.exp &&
+	test_cmp test_crayexR_query5.exp test_crayexR_query5.out
+'
+# turn on everything
+test_expect_success 'powerman turn on everything' '
+	$powerman -h $testaddr -1 cmm0 >test_crayexR_on6A.out &&
+	echo Command completed successfully >test_crayexR_on6A.exp &&
+	test_cmp test_crayexR_on6A.exp test_crayexR_on6A.out &&
+	$powerman -h $testaddr -1 blade[0-7],perif[0-4,7] >test_crayexR_on6B.out &&
+	echo Command completed successfully >test_crayexR_on6B.exp &&
+	test_cmp test_crayexR_on6B.exp test_crayexR_on6B.out &&
+	$powerman -h $testaddr -1 t[0-15],rabbit >test_crayexR_on6C.out &&
+	echo Command completed successfully >test_crayexR_on6C.exp &&
+	test_cmp test_crayexR_on6C.exp test_crayexR_on6C.out
+'
+test_expect_success 'powerman -q shows all on' '
+	$powerman -h $testaddr -q >test_crayexR_query6.out &&
+	makeoutput "blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15]" "" "" >test_crayexR_query6.exp &&
+	test_cmp test_crayexR_query6.exp test_crayexR_query6.out
+'
+# turn off everything works
+test_expect_success 'powerman -0 blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15] completes' '
+	$powerman -h $testaddr -0 blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15] >test_crayexR_off4.out &&
+	echo Command completed successfully >test_crayexR_off4.exp &&
+	test_cmp test_crayexR_off4.exp test_crayexR_off4.out
+'
+test_expect_success 'powerman -q shows all off' '
+	$powerman -h $testaddr -q >test_crayexR_query7.out &&
+	makeoutput "" "blade[0-7],cmm0,perif[0-4,7],rabbit,t[0-15]" "" >test_crayexR_query7.exp &&
+	test_cmp test_crayexR_query7.exp test_crayexR_query7.out
+'
+test_expect_success 'stop powerman daemon (crayexR)' '
+	kill -15 $(cat powermand.pid) &&
+	wait
+'
+
 test_done
 
 # vi: set ft=sh