diff --git a/featureful_box.scad b/featureful_box.scad
new file mode 100644
index 0000000..7cb7e51
--- /dev/null
+++ b/featureful_box.scad
@@ -0,0 +1,62 @@
+// Gridfinity Module Generator
+// Copyright 2023 Chris Cogdon
+// Licence: CC-BY-SA-4.0 
+// https://www.github.com/chmarr/gridfinity-boxes
+//
+// This template creates a simple box of a given size.
+//
+// Note, all "heights" in the parameters use the bottom of the box as zero.
+
+// The number of Gridfinity squares for this box
+gridfinity_count = [3, 2];
+
+// The height of the box walls, not including the stacking lip.
+// If a stacking rim is selected, this will be rounded up to a multiple of 7
+box_height=35;
+
+// Wether or not to add a stacking lip.
+add_stacking_lip=true;
+
+// The radius of the curve added to the internal surface.
+internal_radius=8;
+
+// On which sides to place curves. [right, back, left, front].
+internal_radius_sides = [false, true, false, true];
+
+// How many dividers in the X and Y dimension. [0,0] means no dividers.
+dividers = [0, 0];
+
+// If there are dividers, what should the wall thickness be.
+divider_thickness = 1.2;
+
+// If not "undef", what should the height of the dividers be, measured from the internal bottom.
+// If "undef", the dividers will be to the top of the box (minus the stacking lip).
+divider_height = undef;
+
+// Whether or not to insert holes at the bottom of the box. 0=no holes, 1=corners only, 2=everywhere, 3-slide-in holes in corners
+gridfinity_holes=0;
+
+// Width of slide-in magnet hole (only if gridfinity_holes==3)
+gridfinity_hole_width=5.9;
+
+// Height of slide-in magnet hole (only if gridfinity_holes==3)
+gridfinity_hole_height=2.2;
+
+// Width of a labelling tab at the top-rear of the box. Use '0' for no label.
+label_width=0;
+
+// And now the fun stuff.
+module customizer_break(){}
+
+use <gridfinity_boxes.scad>
+$fn = 40;
+divider_height_ = divider_height == undef ? box_height - 7 : divider_height;
+
+gridfinity_module_base(gridfinity_count, holes=gridfinity_holes, hole_width=gridfinity_hole_width, hole_height=gridfinity_hole_height);
+adjusted_box_height = add_stacking_lip ? ceil(box_height/7)*7 : box_height;
+gridfinity_wall(gridfinity_count, adjusted_box_height-7);
+gridfinity_internal_dividers(gridfinity_count, dividers, divider_thickness, divider_height_, internal_radius, sides=internal_radius_sides);
+gridfinity_label_tab(gridfinity_count, label_width, box_height-7);
+if(add_stacking_lip){
+    gridfinity_stacking_lip(gridfinity_count, adjusted_box_height);
+}
\ No newline at end of file
diff --git a/gridfinity_boxes.scad b/gridfinity_boxes.scad
index ca6f24d..fccc3ec 100644
--- a/gridfinity_boxes.scad
+++ b/gridfinity_boxes.scad
@@ -72,6 +72,10 @@ module isolated_fillet(radius, length) {
     }
 }
 
+module isolated_chamfer(width, length) {
+    linear_extrude(length) polygon([[0,0],[width,0],[0,width]]);
+}
+
 // Translates an internal construction with front left corner at [0,0,0] to
 // our final reference.
 module internal_translate(z_offset=module_unit_height) {
@@ -379,19 +383,19 @@ module gridfinity_wall(count, height, z_offset=module_unit_height) {
 // divider_thickness - the thickness of the divider walls
 // divider_height - the height of the divider measured from the internal bottom
 
-module gridfinity_internal_dividers(count, divider_count, divider_thickness, divider_height, radius, sides=[1,1,1,1], z_offset=module_unit_height) {
+module gridfinity_internal_dividers(count, divider_count, divider_thickness=1.2, divider_height, radius, sides=[1,1,1,1], z_offset=module_unit_height) {
     id = internal_dim(count);
     step = [
         (id.x + divider_thickness) / (divider_count.x+1),
         (id.y + divider_thickness) / (divider_count.y+1)
     ];
-    internal_translate() {
-        if(divider_count.x > 0) {
+    internal_translate(z_offset=z_offset) {
+        if(divider_count.x > 0 && divider_height>0) {
             for(ix = [1: divider_count.x]) {
                 translate([ix*step.x - divider_thickness, 0, 0]) cube([divider_thickness, id.y, divider_height]);
             }
         }
-        if(divider_count.y > 0) {
+        if(divider_count.y > 0 && divider_height>0) {
             for(iy = [1: divider_count.y]) {
                 translate([0, iy*step.y - divider_thickness, 0]) cube([id.x, divider_thickness, divider_height]);
             }
@@ -416,6 +420,23 @@ module gridfinity_internal_fillets(count, radius, sides=[1,1,1,1], z_offset=modu
     gridfinity_internal_dividers(count, divider_count=[0,0], radius=radius, sides=sides, z_offset=z_offset);
 }
 
+// gridfinity_label_tab - creates a tab at the top-rear of the box for labelling
+// count, z_offset - see Common Parameters above.
+// label_width - the width of the label
+// label_thickness - the thickness of the label
+// label_height - the height of the top face of the label above the internal bottom
+module gridfinity_label_tab(count, label_width, label_height, label_thickness=1.0, support_scale=0.2, z_offset=module_unit_height) {
+    id = internal_dim(count);
+    if(label_width>0 && label_thickness>0) {
+        internal_translate(z_offset=z_offset) {
+            translate([0, id.y-label_width, label_height-label_thickness]) {
+                cube([id.x, label_width, label_thickness]);
+                translate([id.x, label_width, 0]) scale([1,1,support_scale]) rotate([0,90,180]) isolated_chamfer(label_width,id.x);
+            }
+        }
+    }
+}
+
 // gridfinity_stacking_lip - Adds a fixed height lip to the object to allow other Gridfinity modules
 //                           to rest atop it.
 // count, z_offset - see Common Parameters above.
diff --git a/simple_box.scad b/simple_box.scad
index b6d03d7..311e41a 100644
--- a/simple_box.scad
+++ b/simple_box.scad
@@ -3,56 +3,24 @@
 // Licence: CC-BY-SA-4.0 
 // https://www.github.com/chmarr/gridfinity-boxes
 //
-// This template creates a simple box of a given size.
-//
-// Note, all "heights" in the parameters use the bottom of the box as zero.
+// This template creates a simple box of a given size, with a small internal fillet and holes
+// in the base to glue-in magnets. If you want a box with more
+// features and options, use "featureful_box.scad".
 
 // The number of Gridfinity squares for this box
 gridfinity_count = [3, 2];
 
-// The height of the box walls, not including the stacking lip.
-// If a stacking rim is selected, this will be rounded up to a multiple of 7
-box_height=35;
-
-// Wether or not to add a stacking lip.
-add_stacking_lip=true;
-
-// The radius of the curve added to the internal surface.
-internal_radius=8;
-
-// On which sides to place curves. [right, back, left, front].
-internal_radius_sides = [false, true, false, true];
-
-// How many dividers in the X and Y dimension. [0,0] means no dividers.
-dividers = [0, 0];
-
-// If there are dividers, what should the wall thickness be.
-divider_thickness = 1.2;
-
-// If not "undef", what should the height of the dividers be, measured from the internal bottom.
-// If "undef", the dividers will be to the top of the box (minus the stacking lip).
-divider_height = undef;
-
-// Whether or not to insert holes at the bottom of the box. 0=no holes, 1=corners only, 2=everywhere, 3-slide-in holes in corners
-gridfinity_holes=0;
-
-// Width of slide-in magnet hole (only if gridfinity_holes==3)
-gridfinity_hole_width=5.9;
+// The height of the box walls in gridfinity units of 7mm, not including the stacking lip.
+gridfinity_box_height=5;
 
-// Height of slide-in magnet hole (only if gridfinity_holes==3)
-gridfinity_hole_height=2.2;
 
 // And now the fun stuff.
 module customizer_break(){}
 
 use <gridfinity_boxes.scad>
 $fn = 40;
-divider_height_ = divider_height == undef ? box_height - 7 : divider_height;
 
-gridfinity_module_base(gridfinity_count, holes=gridfinity_holes, hole_width=gridfinity_hole_width, hole_height=gridfinity_hole_height);
-adjusted_box_height = add_stacking_lip ? ceil(box_height/7)*7 : box_height;
-gridfinity_wall(gridfinity_count, adjusted_box_height-7);
-gridfinity_internal_dividers(gridfinity_count, dividers, divider_thickness, divider_height_, internal_radius, sides=internal_radius_sides);
-if(add_stacking_lip){
-    gridfinity_stacking_lip(gridfinity_count, adjusted_box_height);
-}
\ No newline at end of file
+gridfinity_module_base(gridfinity_count, holes=1);
+gridfinity_wall(gridfinity_count, gridfinity_box_height*7 - 7);
+gridfinity_internal_fillets(gridfinity_count, radius=5, sides=[false,true,false,true]);
+gridfinity_stacking_lip(gridfinity_count, gridfinity_box_height*7 - 7);
\ No newline at end of file