diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
index 124271da1c2f..4d83e5703cc8 100644
--- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
+++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
@@ -60,6 +60,9 @@
 // Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
 //
 #define SPI_DEVICE 2
+#define SCK_PIN                            PB13  // SPI2
+#define MISO_PIN                           PB14  // SPI2
+#define MOSI_PIN                           PB15  // SPI2
 
 // SPI Flash
 #define HAS_SPI_FLASH                          1
@@ -269,41 +272,38 @@
   #error "FLSun HiSpeed default BEEPER_PIN is not a SPEAKER."
 #endif
 
-/**
- * Note: MKS Robin TFT screens use various TFT controllers
- * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
- * ILI9488 is not supported
- * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
- *
- * If the screen stays white, disable 'LCD_RESET_PIN'
- * to let the bootloader init the screen.
- *
- * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
- * because Marlin uses the reset as a failsafe to revive a glitchy LCD.
- */
-
-// QQS-Pro uses MKS Robin TFT v2.0 320x240
+#if HAS_FSMC_TFT || HAS_GRAPHICAL_TFT
+  #define TFT_CS_PIN                        PD7   // NE4
+  #define TFT_RS_PIN                        PD11  // A0
+#endif
 
-// Shared FSMC Configs
 #if HAS_FSMC_TFT
-  #define DOGLCD_MOSI                       -1    // Prevent auto-define by Conditionals_post.h
-  #define DOGLCD_SCK                        -1
-
-  #define FSMC_CS_PIN                       PD7   // NE4
-  #define FSMC_RS_PIN                       PD11  // A0
-
-  #define TFT_RESET_PIN                     PC6   // FSMC_RST
+  /**
+   * Note: MKS Robin TFT screens use various TFT controllers
+   * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
+   * ILI9488 is not supported
+   * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
+   *
+   * If the screen stays white, disable 'LCD_RESET_PIN'
+   * to let the bootloader init the screen.
+   *
+   * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
+   * because Marlin uses the reset as a failsafe to revive a glitchy LCD.
+   */
+  //#define TFT_RESET_PIN                   PC6   // FSMC_RST
   #define TFT_BACKLIGHT_PIN                 PD13
+  #define FSMC_CS_PIN                 TFT_CS_PIN  // NE4
+  #define FSMC_RS_PIN                 TFT_RS_PIN  // A0
 
   #define LCD_USE_DMA_FSMC                        // Use DMA transfers to send data to the TFT
   #define FSMC_DMA_DEV                      DMA2
   #define FSMC_DMA_CHANNEL               DMA_CH5
-  #if ENABLED(TFT_CLASSIC_UI)
+  #ifdef TFT_CLASSIC_UI
     #define TFT_MARLINBG_COLOR            0x3186  // Grey
     #define TFT_MARLINUI_COLOR            0xC7B6  // Green
     #define TFT_BTARROWS_COLOR            0xDEE6  // Yellow
     #define TFT_BTOKMENU_COLOR            0x145F  // Cyan
-  #endif
+  #endif  
   #define TFT_BUFFER_SIZE                  14400
 #elif HAS_GRAPHICAL_TFT
   #define TFT_RESET_PIN                     PC6
@@ -315,4 +315,5 @@
   #define TOUCH_SCK_PIN                     PB13  // SPI2_SCK
   #define TOUCH_MISO_PIN                    PB14  // SPI2_MISO
   #define TOUCH_MOSI_PIN                    PB15  // SPI2_MOSI
+  #define TOUCH_INT_PIN                     -1
 #endif
diff --git a/platformio.ini b/platformio.ini
index aaa4c8b51180..28b6ceddd823 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -1149,20 +1149,6 @@ extra_scripts   = ${env:STM32F103RE.extra_scripts}
 debug_tool      = jlink
 upload_protocol = jlink
 
-#
-# FLSUN QQ (STM32F103VET6)
-#
-[env:flsun_hispeed]
-platform          = ${common_stm32f1.platform}
-extends           = common_stm32f1
-board             = genericSTM32F103VE
-extra_scripts     = ${common.extra_scripts}
-  buildroot/share/PlatformIO/scripts/mks_robin_mini.py
-  buildroot/share/PlatformIO/scripts/add_nanolib.py
-build_flags       = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4  -DHAVE_SW_SERIAL
-lib_deps          = SoftwareSerialM
-  #Adafruit NeoPixel=https://github.com/Foxies-CSTL/Robin-NeoPixel-Lib/archive/master.zip
-
 #
 # FLSUN QQS Pro (STM32F103VET6) using hal STM32
 # board Hispeedv1